]> git.karo-electronics.de Git - linux-beck.git/commitdiff
i2c: uniphier: add UniPhier FIFO-less I2C driver
authorMasahiro Yamada <yamada.masahiro@socionext.com>
Fri, 23 Oct 2015 10:51:59 +0000 (19:51 +0900)
committerWolfram Sang <wsa@the-dreams.de>
Fri, 23 Oct 2015 19:55:45 +0000 (21:55 +0200)
Add support for on-chip I2C controller used on old UniPhier SoCs
such as PH1-LD4, PH1-sLD8, etc.  This adapter is so simple that
it has no FIFO in it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Documentation/devicetree/bindings/i2c/i2c-uniphier.txt [new file with mode: 0644]
MAINTAINERS
drivers/i2c/busses/Kconfig
drivers/i2c/busses/Makefile
drivers/i2c/busses/i2c-uniphier.c [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt b/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt
new file mode 100644 (file)
index 0000000..26f9d95
--- /dev/null
@@ -0,0 +1,25 @@
+UniPhier I2C controller (FIFO-less)
+
+Required properties:
+- compatible: should be "socionext,uniphier-i2c".
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- reg: offset and length of the register set for the device.
+- interrupts: a single interrupt specifier.
+- clocks: phandle to the input clock.
+
+Optional properties:
+- clock-frequency: desired I2C bus frequency in Hz.  The maximum supported
+  value is 400000.  Defaults to 100000 if not specified.
+
+Examples:
+
+       i2c0: i2c@58400000 {
+               compatible = "socionext,uniphier-i2c";
+               reg = <0x58400000 0x40>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               interrupts = <0 41 1>;
+               clocks = <&i2c_clk>;
+               clock-frequency = <100000>;
+       };
index 797236befd279bef6bf7c0c074b132d4bf6f9380..2f23aab10398bbb0caf58e839a5d98deb67ea768 100644 (file)
@@ -1607,6 +1607,7 @@ L:        linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:     Maintained
 F:     arch/arm/boot/dts/uniphier*
 F:     arch/arm/mach-uniphier/
+F:     drivers/i2c/busses/i2c-uniphier*
 F:     drivers/pinctrl/uniphier/
 F:     drivers/tty/serial/8250/8250_uniphier.c
 N:     uniphier
index 14147ec6b79046fdbdb8776c0d7f8d781e21df60..6a40e1693dd40404489d36e694c94bffc39776c2 100644 (file)
@@ -902,6 +902,14 @@ config I2C_TEGRA
          If you say yes to this option, support will be included for the
          I2C controller embedded in NVIDIA Tegra SOCs
 
+config I2C_UNIPHIER
+       tristate "UniPhier FIFO-less I2C controller"
+       depends on ARCH_UNIPHIER
+       help
+         If you say yes to this option, support will be included for
+         the UniPhier FIFO-less I2C interface embedded in PH1-LD4, PH1-sLD8,
+         or older UniPhier SoCs.
+
 config I2C_VERSATILE
        tristate "ARM Versatile/Realview I2C bus support"
        depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS
index 6df3b303bd092bb3bf093dade0bc8e7c32ec51ca..f9f09028568137d9af67f6495e8fe586b5223c19 100644 (file)
@@ -87,6 +87,7 @@ obj-$(CONFIG_I2C_ST)          += i2c-st.o
 obj-$(CONFIG_I2C_STU300)       += i2c-stu300.o
 obj-$(CONFIG_I2C_SUN6I_P2WI)   += i2c-sun6i-p2wi.o
 obj-$(CONFIG_I2C_TEGRA)                += i2c-tegra.o
+obj-$(CONFIG_I2C_UNIPHIER)     += i2c-uniphier.o
 obj-$(CONFIG_I2C_VERSATILE)    += i2c-versatile.o
 obj-$(CONFIG_I2C_WMT)          += i2c-wmt.o
 obj-$(CONFIG_I2C_OCTEON)       += i2c-octeon.o
diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c
new file mode 100644 (file)
index 0000000..e3c3861
--- /dev/null
@@ -0,0 +1,441 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define UNIPHIER_I2C_DTRM      0x00    /* TX register */
+#define     UNIPHIER_I2C_DTRM_IRQEN    BIT(11) /* enable interrupt */
+#define     UNIPHIER_I2C_DTRM_STA      BIT(10) /* start condition */
+#define     UNIPHIER_I2C_DTRM_STO      BIT(9)  /* stop condition */
+#define     UNIPHIER_I2C_DTRM_NACK     BIT(8)  /* do not return ACK */
+#define     UNIPHIER_I2C_DTRM_RD       BIT(0)  /* read transaction */
+#define UNIPHIER_I2C_DREC      0x04    /* RX register */
+#define     UNIPHIER_I2C_DREC_MST      BIT(14) /* 1 = master, 0 = slave */
+#define     UNIPHIER_I2C_DREC_TX       BIT(13) /* 1 = transmit, 0 = receive */
+#define     UNIPHIER_I2C_DREC_STS      BIT(12) /* stop condition detected */
+#define     UNIPHIER_I2C_DREC_LRB      BIT(11) /* no ACK */
+#define     UNIPHIER_I2C_DREC_LAB      BIT(9)  /* arbitration lost */
+#define     UNIPHIER_I2C_DREC_BBN      BIT(8)  /* bus not busy */
+#define UNIPHIER_I2C_MYAD      0x08    /* slave address */
+#define UNIPHIER_I2C_CLK       0x0c    /* clock frequency control */
+#define UNIPHIER_I2C_BRST      0x10    /* bus reset */
+#define     UNIPHIER_I2C_BRST_FOEN     BIT(1)  /* normal operation */
+#define     UNIPHIER_I2C_BRST_RSCL     BIT(0)  /* release SCL */
+#define UNIPHIER_I2C_HOLD      0x14    /* hold time control */
+#define UNIPHIER_I2C_BSTS      0x18    /* bus status monitor */
+#define     UNIPHIER_I2C_BSTS_SDA      BIT(1)  /* readback of SDA line */
+#define     UNIPHIER_I2C_BSTS_SCL      BIT(0)  /* readback of SCL line */
+#define UNIPHIER_I2C_NOISE     0x1c    /* noise filter control */
+#define UNIPHIER_I2C_SETUP     0x20    /* setup time control */
+
+#define UNIPHIER_I2C_DEFAULT_SPEED     100000
+#define UNIPHIER_I2C_MAX_SPEED         400000
+
+struct uniphier_i2c_priv {
+       struct completion comp;
+       struct i2c_adapter adap;
+       void __iomem *membase;
+       struct clk *clk;
+       unsigned int busy_cnt;
+};
+
+static irqreturn_t uniphier_i2c_interrupt(int irq, void *dev_id)
+{
+       struct uniphier_i2c_priv *priv = dev_id;
+
+       /*
+        * This hardware uses edge triggered interrupt.  Do not touch the
+        * hardware registers in this handler to make sure to catch the next
+        * interrupt edge.  Just send a complete signal and return.
+        */
+       complete(&priv->comp);
+
+       return IRQ_HANDLED;
+}
+
+static int uniphier_i2c_xfer_byte(struct i2c_adapter *adap, u32 txdata,
+                                 u32 *rxdatap)
+{
+       struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
+       unsigned long time_left;
+       u32 rxdata;
+
+       reinit_completion(&priv->comp);
+
+       txdata |= UNIPHIER_I2C_DTRM_IRQEN;
+       dev_dbg(&adap->dev, "write data: 0x%04x\n", txdata);
+       writel(txdata, priv->membase + UNIPHIER_I2C_DTRM);
+
+       time_left = wait_for_completion_timeout(&priv->comp, adap->timeout);
+       if (unlikely(!time_left)) {
+               dev_err(&adap->dev, "transaction timeout\n");
+               return -ETIMEDOUT;
+       }
+
+       rxdata = readl(priv->membase + UNIPHIER_I2C_DREC);
+       dev_dbg(&adap->dev, "read data: 0x%04x\n", rxdata);
+
+       if (rxdatap)
+               *rxdatap = rxdata;
+
+       return 0;
+}
+
+static int uniphier_i2c_send_byte(struct i2c_adapter *adap, u32 txdata)
+{
+       u32 rxdata;
+       int ret;
+
+       ret = uniphier_i2c_xfer_byte(adap, txdata, &rxdata);
+       if (ret)
+               return ret;
+
+       if (unlikely(rxdata & UNIPHIER_I2C_DREC_LAB)) {
+               dev_dbg(&adap->dev, "arbitration lost\n");
+               return -EAGAIN;
+       }
+       if (unlikely(rxdata & UNIPHIER_I2C_DREC_LRB)) {
+               dev_dbg(&adap->dev, "could not get ACK\n");
+               return -ENXIO;
+       }
+
+       return 0;
+}
+
+static int uniphier_i2c_tx(struct i2c_adapter *adap, u16 addr, u16 len,
+                          const u8 *buf)
+{
+       int ret;
+
+       dev_dbg(&adap->dev, "start condition\n");
+       ret = uniphier_i2c_send_byte(adap, addr << 1 |
+                                    UNIPHIER_I2C_DTRM_STA |
+                                    UNIPHIER_I2C_DTRM_NACK);
+       if (ret)
+               return ret;
+
+       while (len--) {
+               ret = uniphier_i2c_send_byte(adap,
+                                            UNIPHIER_I2C_DTRM_NACK | *buf++);
+               if (ret)
+                       return ret;
+       }
+
+       return 0;
+}
+
+static int uniphier_i2c_rx(struct i2c_adapter *adap, u16 addr, u16 len,
+                          u8 *buf)
+{
+       int ret;
+
+       dev_dbg(&adap->dev, "start condition\n");
+       ret = uniphier_i2c_send_byte(adap, addr << 1 |
+                                    UNIPHIER_I2C_DTRM_STA |
+                                    UNIPHIER_I2C_DTRM_NACK |
+                                    UNIPHIER_I2C_DTRM_RD);
+       if (ret)
+               return ret;
+
+       while (len--) {
+               u32 rxdata;
+
+               ret = uniphier_i2c_xfer_byte(adap,
+                                            len ? 0 : UNIPHIER_I2C_DTRM_NACK,
+                                            &rxdata);
+               if (ret)
+                       return ret;
+               *buf++ = rxdata;
+       }
+
+       return 0;
+}
+
+static int uniphier_i2c_stop(struct i2c_adapter *adap)
+{
+       dev_dbg(&adap->dev, "stop condition\n");
+       return uniphier_i2c_send_byte(adap, UNIPHIER_I2C_DTRM_STO |
+                                     UNIPHIER_I2C_DTRM_NACK);
+}
+
+static int uniphier_i2c_master_xfer_one(struct i2c_adapter *adap,
+                                       struct i2c_msg *msg, bool stop)
+{
+       bool is_read = msg->flags & I2C_M_RD;
+       bool recovery = false;
+       int ret;
+
+       dev_dbg(&adap->dev, "%s: addr=0x%02x, len=%d, stop=%d\n",
+               is_read ? "receive" : "transmit", msg->addr, msg->len, stop);
+
+       if (is_read)
+               ret = uniphier_i2c_rx(adap, msg->addr, msg->len, msg->buf);
+       else
+               ret = uniphier_i2c_tx(adap, msg->addr, msg->len, msg->buf);
+
+       if (ret == -EAGAIN) /* could not acquire bus. bail out without STOP */
+               return ret;
+
+       if (ret == -ETIMEDOUT) {
+               /* This error is fatal.  Needs recovery. */
+               stop = false;
+               recovery = true;
+       }
+
+       if (stop) {
+               int ret2 = uniphier_i2c_stop(adap);
+
+               if (ret2) {
+                       /* Failed to issue STOP.  The bus needs recovery. */
+                       recovery = true;
+                       ret = ret ?: ret2;
+               }
+       }
+
+       if (recovery)
+               i2c_recover_bus(adap);
+
+       return ret;
+}
+
+static int uniphier_i2c_check_bus_busy(struct i2c_adapter *adap)
+{
+       struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
+
+       if (!(readl(priv->membase + UNIPHIER_I2C_DREC) &
+                                               UNIPHIER_I2C_DREC_BBN)) {
+               if (priv->busy_cnt++ > 3) {
+                       /*
+                        * If bus busy continues too long, it is probably
+                        * in a wrong state.  Try bus recovery.
+                        */
+                       i2c_recover_bus(adap);
+                       priv->busy_cnt = 0;
+               }
+
+               return -EAGAIN;
+       }
+
+       priv->busy_cnt = 0;
+       return 0;
+}
+
+static int uniphier_i2c_master_xfer(struct i2c_adapter *adap,
+                                   struct i2c_msg *msgs, int num)
+{
+       struct i2c_msg *msg, *emsg = msgs + num;
+       int ret;
+
+       ret = uniphier_i2c_check_bus_busy(adap);
+       if (ret)
+               return ret;
+
+       for (msg = msgs; msg < emsg; msg++) {
+               /* If next message is read, skip the stop condition */
+               bool stop = !(msg + 1 < emsg && msg[1].flags & I2C_M_RD);
+               /* but, force it if I2C_M_STOP is set */
+               if (msg->flags & I2C_M_STOP)
+                       stop = true;
+
+               ret = uniphier_i2c_master_xfer_one(adap, msg, stop);
+               if (ret)
+                       return ret;
+       }
+
+       return num;
+}
+
+static u32 uniphier_i2c_functionality(struct i2c_adapter *adap)
+{
+       return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm uniphier_i2c_algo = {
+       .master_xfer = uniphier_i2c_master_xfer,
+       .functionality = uniphier_i2c_functionality,
+};
+
+static void uniphier_i2c_reset(struct uniphier_i2c_priv *priv, bool reset_on)
+{
+       u32 val = UNIPHIER_I2C_BRST_RSCL;
+
+       val |= reset_on ? 0 : UNIPHIER_I2C_BRST_FOEN;
+       writel(val, priv->membase + UNIPHIER_I2C_BRST);
+}
+
+static int uniphier_i2c_get_scl(struct i2c_adapter *adap)
+{
+       struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
+
+       return !!(readl(priv->membase + UNIPHIER_I2C_BSTS) &
+                                                       UNIPHIER_I2C_BSTS_SCL);
+}
+
+static void uniphier_i2c_set_scl(struct i2c_adapter *adap, int val)
+{
+       struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
+
+       writel(val ? UNIPHIER_I2C_BRST_RSCL : 0,
+              priv->membase + UNIPHIER_I2C_BRST);
+}
+
+static int uniphier_i2c_get_sda(struct i2c_adapter *adap)
+{
+       struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
+
+       return !!(readl(priv->membase + UNIPHIER_I2C_BSTS) &
+                                                       UNIPHIER_I2C_BSTS_SDA);
+}
+
+static void uniphier_i2c_unprepare_recovery(struct i2c_adapter *adap)
+{
+       uniphier_i2c_reset(i2c_get_adapdata(adap), false);
+}
+
+static struct i2c_bus_recovery_info uniphier_i2c_bus_recovery_info = {
+       .recover_bus = i2c_generic_scl_recovery,
+       .get_scl = uniphier_i2c_get_scl,
+       .set_scl = uniphier_i2c_set_scl,
+       .get_sda = uniphier_i2c_get_sda,
+       .unprepare_recovery = uniphier_i2c_unprepare_recovery,
+};
+
+static int uniphier_i2c_clk_init(struct device *dev,
+                                struct uniphier_i2c_priv *priv)
+{
+       struct device_node *np = dev->of_node;
+       unsigned long clk_rate;
+       u32 bus_speed;
+       int ret;
+
+       if (of_property_read_u32(np, "clock-frequency", &bus_speed))
+               bus_speed = UNIPHIER_I2C_DEFAULT_SPEED;
+
+       if (bus_speed > UNIPHIER_I2C_MAX_SPEED)
+               bus_speed = UNIPHIER_I2C_MAX_SPEED;
+
+       /* Get input clk rate through clk driver */
+       priv->clk = devm_clk_get(dev, NULL);
+       if (IS_ERR(priv->clk)) {
+               dev_err(dev, "failed to get clock\n");
+               return PTR_ERR(priv->clk);
+       }
+
+       ret = clk_prepare_enable(priv->clk);
+       if (ret)
+               return ret;
+
+       clk_rate = clk_get_rate(priv->clk);
+
+       uniphier_i2c_reset(priv, true);
+
+       writel((clk_rate / bus_speed / 2 << 16) | (clk_rate / bus_speed),
+              priv->membase + UNIPHIER_I2C_CLK);
+
+       uniphier_i2c_reset(priv, false);
+
+       return 0;
+}
+
+static int uniphier_i2c_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct uniphier_i2c_priv *priv;
+       struct resource *regs;
+       int irq;
+       int ret;
+
+       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+       if (!priv)
+               return -ENOMEM;
+
+       regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       priv->membase = devm_ioremap_resource(dev, regs);
+       if (IS_ERR(priv->membase))
+               return PTR_ERR(priv->membase);
+
+       irq = platform_get_irq(pdev, 0);
+       if (irq < 0) {
+               dev_err(dev, "failed to get IRQ number");
+               return irq;
+       }
+
+       init_completion(&priv->comp);
+       priv->adap.owner = THIS_MODULE;
+       priv->adap.algo = &uniphier_i2c_algo;
+       priv->adap.dev.parent = dev;
+       priv->adap.dev.of_node = dev->of_node;
+       strlcpy(priv->adap.name, "UniPhier I2C", sizeof(priv->adap.name));
+       priv->adap.bus_recovery_info = &uniphier_i2c_bus_recovery_info;
+       i2c_set_adapdata(&priv->adap, priv);
+       platform_set_drvdata(pdev, priv);
+
+       ret = uniphier_i2c_clk_init(dev, priv);
+       if (ret)
+               return ret;
+
+       ret = devm_request_irq(dev, irq, uniphier_i2c_interrupt, 0, pdev->name,
+                              priv);
+       if (ret) {
+               dev_err(dev, "failed to request irq %d\n", irq);
+               goto err;
+       }
+
+       ret = i2c_add_adapter(&priv->adap);
+       if (ret) {
+               dev_err(dev, "failed to add I2C adapter\n");
+               goto err;
+       }
+
+err:
+       if (ret)
+               clk_disable_unprepare(priv->clk);
+
+       return ret;
+}
+
+static int uniphier_i2c_remove(struct platform_device *pdev)
+{
+       struct uniphier_i2c_priv *priv = platform_get_drvdata(pdev);
+
+       i2c_del_adapter(&priv->adap);
+       clk_disable_unprepare(priv->clk);
+
+       return 0;
+}
+
+static const struct of_device_id uniphier_i2c_match[] = {
+       { .compatible = "socionext,uniphier-i2c" },
+       { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_i2c_match);
+
+static struct platform_driver uniphier_i2c_drv = {
+       .probe  = uniphier_i2c_probe,
+       .remove = uniphier_i2c_remove,
+       .driver = {
+               .name  = "uniphier-i2c",
+               .of_match_table = uniphier_i2c_match,
+       },
+};
+module_platform_driver(uniphier_i2c_drv);
+
+MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
+MODULE_DESCRIPTION("UniPhier I2C bus driver");
+MODULE_LICENSE("GPL");