#include <linux/gpio.h>
#include <linux/amba/mmci.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
+/*
+ * These are the only hard-coded address offsets we still have to use.
+ */
+#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */
+#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */
+#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */
+#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */
+#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */
+#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */
+#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */
+#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */
+#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */
+#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */
+#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */
+#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */
+#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */
+#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */
+#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */
+#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */
+#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */
+#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */
+#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */
+#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */
+#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */
+#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */
+#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */
+#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */
+#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */
+#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */
+#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */
+#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */
+#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */
+#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */
+#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */
+#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */
+#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */
+#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */
+#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */
+#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */
+#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */
+#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */
+#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */
+#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */
+#define NOMADIK_UART1_VBASE 0xF01FB000
+
static unsigned long out_low[] = { PIN_OUTPUT_LOW };
static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup),
};
-/* All SoC devices live in the same area (see hardware.h) */
-static struct map_desc nomadik_io_desc[] __initdata = {
+/* This is needed for LL-debug/earlyprintk/debug-macro.S */
+static struct map_desc cpu8815_io_desc[] __initdata = {
{
- .virtual = NOMADIK_IO_VIRTUAL,
- .pfn = __phys_to_pfn(NOMADIK_IO_PHYSICAL),
- .length = NOMADIK_IO_SIZE,
- .type = MT_DEVICE,
- }
- /* static ram and secured ram may be added later */
+ .virtual = NOMADIK_UART1_VBASE,
+ .pfn = __phys_to_pfn(NOMADIK_UART1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
};
static void __init cpu8815_map_io(void)
{
- iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc));
+ iotable_init(cpu8815_io_desc, ARRAY_SIZE(cpu8815_io_desc));
}
static void cpu8815_restart(char mode, const char *cmd)
{
- void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
+ void __iomem *srcbase = ioremap(NOMADIK_SRC_BASE, SZ_4K);
/* FIXME: use egpio when implemented */
/* Write anything to Reset status register */
- writel(1, src_rstsr);
+ writel(1, srcbase + 0x18);
}
/* Initial value for SRC control register: all timers use MXTAL/8 source */
+++ /dev/null
-/*
- * This file contains the hardware definitions of the Nomadik.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * YOU should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */
-#define NOMADIK_IO_VIRTUAL 0xF0000000 /* VA of IO */
-#define NOMADIK_IO_PHYSICAL 0x10000000 /* PA of IO */
-#define NOMADIK_IO_SIZE 0x00300000 /* 3MB for all regs */
-
-/* used in C code, so cast to proper type */
-#define io_p2v(x) ((void __iomem *)(x) \
- - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
-#define io_v2p(x) ((unsigned long)(x) \
- - NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
-
-/* used in asm code, so no casts */
-#define IO_ADDRESS(x) IOMEM((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
-
-/*
- * Base address defination for Nomadik Onchip Logic Block
- */
-#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */
-#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */
-#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */
-#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */
-#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */
-#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */
-#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */
-#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */
-#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */
-#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */
-#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */
-#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */
-#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */
-#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */
-#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */
-#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */
-#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */
-#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */
-#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */
-#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */
-#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */
-#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */
-#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */
-#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */
-#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */
-#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */
-#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */
-#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */
-#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */
-#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */
-#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */
-#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */
-#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */
-#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */
-#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */
-#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */
-#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */
-#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */
-#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */
-#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */
-
-/* Other ranges, not for p2v/v2p */
-#define NOMADIK_BACKUP_RAM 0x80010000
-#define NOMADIK_EBROM 0x80000000 /* Embedded boot ROM */
-#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000 /* HAMACV Data Memory Start */
-#define NOMADIK_HAMACV_DMEM_END 0xA01FFFFF /* HAMACV Data Memory End */
-#define NOMADIK_HAMACA_DMEM 0xA0200000 /* HAMACA Data Memory Space */
-
-#define NOMADIK_FSMC_VA IO_ADDRESS(NOMADIK_FSMC_BASE)
-#define NOMADIK_MTU0_VA IO_ADDRESS(NOMADIK_MTU0_BASE)
-#define NOMADIK_MTU1_VA IO_ADDRESS(NOMADIK_MTU1_BASE)
-
-#endif /* __ASM_ARCH_HARDWARE_H */
projects / linux-beck.git / commitdiff