ff000000 ffbfffff Reserved for future expansion of DMA
mapping region.
-VMALLOC_END feffffff Free for platform use, recommended.
- VMALLOC_END must be aligned to a 2MB
- boundary.
-
VMALLOC_START VMALLOC_END-1 vmalloc() / ioremap() space.
Memory returned by vmalloc/ioremap will
be dynamically placed in this region.
- VMALLOC_START may be based upon the value
- of the high_memory variable.
+ Machine specific static mappings are also
+ located here through iotable_init().
+ VMALLOC_START is based upon the value
+ of the high_memory variable, and VMALLOC_END
+ is equal to 0xff000000.
PAGE_OFFSET high_memory-1 Kernel direct-mapped RAM region.
This maps the platforms RAM, and typically
Required root node properties:
- compatible = "fsl,imx53-smd", "fsl,imx53";
-i.MX6 Quad SABRE Automotive Board
+i.MX6 Quad Armadillo2 Board
Required root node properties:
- - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+ - compatible = "fsl,imx6q-arm2", "fsl,imx6q";
+
+i.MX6 Quad SABRE Lite Board
+Required root node properties:
+ - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
- interrupts : Interrupt source of the parent interrupt controller. Only
present on secondary GICs.
+- cpu-offset : per-cpu offset within the distributor and cpu interface
+ regions, used when the GIC doesn't have banked registers. The offset is
+ cpu-offset * cpu-nr.
+
Example:
intc: interrupt-controller@fff11000 {
--- /dev/null
+* ARM Vectored Interrupt Controller
+
+One or more Vectored Interrupt Controllers (VIC's) can be connected in an ARM
+system for interrupt routing. For multiple controllers they can either be
+nested or have the outputs wire-OR'd together.
+
+Required properties:
+
+- compatible : should be one of
+ "arm,pl190-vic"
+ "arm,pl192-vic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : The number of cells to define the interrupts. Must be 1 as
+ the VIC has no configuration options for interrupt sources. The cell is a u32
+ and defines the interrupt number.
+- reg : The register bank for the VIC.
+
+Optional properties:
+
+- interrupts : Interrupt source for parent controllers if the VIC is nested.
+
+Example:
+
+ vic0: interrupt-controller@60000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x60000 0x1000>;
+ };
config XIP_KERNEL
bool "Kernel Execute-In-Place from ROM"
- depends on !ZBOOT_ROM
+ depends on !ZBOOT_ROM && !ARM_LPAE
help
Execute-In-Place allows the kernel to run from non-volatile storage
directly addressable by the CPU, such as NOR flash. This saves RAM
config KEXEC
bool "Kexec system call (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU)
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
#endif
+ mcr p15, 0, r0, c7, c5, 4 @ ISB
mcr p15, 0, r0, c1, c0, 0 @ load control register
mrc p15, 0, r0, c1, c0, 0 @ and read it back
mov r0, #0
};
esdhc@70008000 { /* ESDHC2 */
- cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
- wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+ cd-gpios = <&gpio1 6 0>;
+ wp-gpios = <&gpio1 5 0>;
status = "okay";
};
- uart2: uart@7000c000 { /* UART3 */
+ uart3: uart@7000c000 {
fsl,uart-has-rtscts;
status = "okay";
};
ecspi@70010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
- <&gpio3 25 0>; /* GPIO4_25 */
+ cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
status = "okay";
pmic: mc13892@0 {
compatible = "fsl,mc13892";
spi-max-frequency = <6000000>;
reg = <0>;
- mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */
+ mc13xxx-irq-gpios = <&gpio1 8 0>;
fsl,mc13xxx-uses-regulator;
};
reg = <0x73fa8000 0x4000>;
};
- uart0: uart@73fbc000 {
+ uart1: uart@73fbc000 {
fsl,uart-has-rtscts;
status = "okay";
};
- uart1: uart@73fc0000 {
+ uart2: uart@73fc0000 {
status = "okay";
};
};
power {
label = "Power Button";
- gpios = <&gpio1 21 0>;
+ gpios = <&gpio2 21 0>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
/ {
aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
};
tzic: tz-interrupt-controller@e0000000 {
status = "disabled";
};
- uart2: uart@7000c000 { /* UART3 */
+ uart3: uart@7000c000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x7000c000 0x4000>;
interrupts = <33>;
};
};
- gpio0: gpio@73f84000 { /* GPIO1 */
+ gpio1: gpio@73f84000 {
compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
reg = <0x73f84000 0x4000>;
interrupts = <50 51>;
#interrupt-cells = <1>;
};
- gpio1: gpio@73f88000 { /* GPIO2 */
+ gpio2: gpio@73f88000 {
compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
reg = <0x73f88000 0x4000>;
interrupts = <52 53>;
#interrupt-cells = <1>;
};
- gpio2: gpio@73f8c000 { /* GPIO3 */
+ gpio3: gpio@73f8c000 {
compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
reg = <0x73f8c000 0x4000>;
interrupts = <54 55>;
#interrupt-cells = <1>;
};
- gpio3: gpio@73f90000 { /* GPIO4 */
+ gpio4: gpio@73f90000 {
compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
reg = <0x73f90000 0x4000>;
interrupts = <56 57>;
status = "disabled";
};
- uart0: uart@73fbc000 {
+ uart1: uart@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
status = "disabled";
};
- uart1: uart@73fc0000 {
+ uart2: uart@73fc0000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fc0000 0x4000>;
interrupts = <32>;
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
- cd-gpios = <&gpio0 1 0>; /* GPIO1_1 */
- wp-gpios = <&gpio0 9 0>; /* GPIO1_9 */
+ cd-gpios = <&gpio1 1 0>;
+ wp-gpios = <&gpio1 9 0>;
status = "okay";
};
};
reg = <0x53fa8000 0x4000>;
};
- uart0: uart@53fbc000 { /* UART1 */
+ uart1: uart@53fbc000 {
status = "okay";
};
};
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0xf4000000 0x2000000>;
phy-mode = "mii";
- interrupt-parent = <&gpio1>;
+ interrupt-parent = <&gpio2>;
interrupts = <31>;
reg-io-width = <4>;
smsc,irq-push-pull;
home {
label = "Home";
- gpios = <&gpio4 10 0>; /* GPIO5_10 */
+ gpios = <&gpio5 10 0>;
linux,code = <102>; /* KEY_HOME */
gpio-key,wakeup;
};
back {
label = "Back";
- gpios = <&gpio4 11 0>; /* GPIO5_11 */
+ gpios = <&gpio5 11 0>;
linux,code = <158>; /* KEY_BACK */
gpio-key,wakeup;
};
program {
label = "Program";
- gpios = <&gpio4 12 0>; /* GPIO5_12 */
+ gpios = <&gpio5 12 0>;
linux,code = <362>; /* KEY_PROGRAM */
gpio-key,wakeup;
};
volume-up {
label = "Volume Up";
- gpios = <&gpio4 13 0>; /* GPIO5_13 */
+ gpios = <&gpio5 13 0>;
linux,code = <115>; /* KEY_VOLUMEUP */
};
volume-down {
label = "Volume Down";
- gpios = <&gpio3 0 0>; /* GPIO4_0 */
+ gpios = <&gpio4 0 0>;
linux,code = <114>; /* KEY_VOLUMEDOWN */
};
};
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
- cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
- wp-gpios = <&gpio2 14 0>; /* GPIO3_14 */
+ cd-gpios = <&gpio3 13 0>;
+ wp-gpios = <&gpio3 14 0>;
status = "okay";
};
ecspi@50010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
- <&gpio2 19 0>; /* GPIO3_19 */
+ cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
flash: at45db321d@1 {
};
esdhc@50020000 { /* ESDHC3 */
- cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
- wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
+ cd-gpios = <&gpio3 11 0>;
+ wp-gpios = <&gpio3 12 0>;
status = "okay";
};
};
reg = <0x53fa8000 0x4000>;
};
- uart0: uart@53fbc000 { /* UART1 */
+ uart1: uart@53fbc000 {
status = "okay";
};
};
fec@63fec000 {
phy-mode = "rmii";
- phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
};
green {
label = "Heartbeat";
- gpios = <&gpio6 7 0>; /* GPIO7_7 */
+ gpios = <&gpio7 7 0>;
linux,default-trigger = "heartbeat";
};
};
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
- cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ cd-gpios = <&gpio3 13 0>;
status = "okay";
};
esdhc@50020000 { /* ESDHC3 */
- cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
- wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
+ cd-gpios = <&gpio3 11 0>;
+ wp-gpios = <&gpio3 12 0>;
status = "okay";
};
};
reg = <0x53fa8000 0x4000>;
};
- uart0: uart@53fbc000 { /* UART1 */
+ uart1: uart@53fbc000 {
status = "okay";
};
};
fec@63fec000 {
phy-mode = "rmii";
- phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
};
power {
label = "Power Button";
- gpios = <&gpio0 8 0>; /* GPIO1_8 */
+ gpios = <&gpio1 8 0>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
volume-up {
label = "Volume Up";
- gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ gpios = <&gpio2 14 0>;
linux,code = <115>; /* KEY_VOLUMEUP */
};
volume-down {
label = "Volume Down";
- gpios = <&gpio1 15 0>; /* GPIO2_15 */
+ gpios = <&gpio2 15 0>;
linux,code = <114>; /* KEY_VOLUMEDOWN */
};
};
user {
label = "Heartbeat";
- gpios = <&gpio6 7 0>; /* GPIO7_7 */
+ gpios = <&gpio7 7 0>;
linux,default-trigger = "heartbeat";
};
};
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
- cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
- wp-gpios = <&gpio3 11 0>; /* GPIO4_11 */
+ cd-gpios = <&gpio3 13 0>;
+ wp-gpios = <&gpio4 11 0>;
status = "okay";
};
status = "okay";
};
- uart2: uart@5000c000 { /* UART3 */
+ uart3: uart@5000c000 {
fsl,uart-has-rtscts;
status = "okay";
};
ecspi@50010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
- <&gpio2 19 0>; /* GPIO3_19 */
+ cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
zigbee: mc1323@0 {
reg = <0x53fa8000 0x4000>;
};
- uart0: uart@53fbc000 { /* UART1 */
+ uart1: uart@53fbc000 {
status = "okay";
};
- uart1: uart@53fc0000 { /* UART2 */
+ uart2: uart@53fc0000 {
status = "okay";
};
};
fec@63fec000 {
phy-mode = "rmii";
- phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
};
volume-up {
label = "Volume Up";
- gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ gpios = <&gpio2 14 0>;
linux,code = <115>; /* KEY_VOLUMEUP */
};
volume-down {
label = "Volume Down";
- gpios = <&gpio1 15 0>; /* GPIO2_15 */
+ gpios = <&gpio2 15 0>;
linux,code = <114>; /* KEY_VOLUMEDOWN */
};
};
/ {
aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
};
tzic: tz-interrupt-controller@0fffc000 {
status = "disabled";
};
- uart2: uart@5000c000 { /* UART3 */
+ uart3: uart@5000c000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
};
};
- gpio0: gpio@53f84000 { /* GPIO1 */
+ gpio1: gpio@53f84000 {
compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
reg = <0x53f84000 0x4000>;
interrupts = <50 51>;
#interrupt-cells = <1>;
};
- gpio1: gpio@53f88000 { /* GPIO2 */
+ gpio2: gpio@53f88000 {
compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
reg = <0x53f88000 0x4000>;
interrupts = <52 53>;
#interrupt-cells = <1>;
};
- gpio2: gpio@53f8c000 { /* GPIO3 */
+ gpio3: gpio@53f8c000 {
compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
reg = <0x53f8c000 0x4000>;
interrupts = <54 55>;
#interrupt-cells = <1>;
};
- gpio3: gpio@53f90000 { /* GPIO4 */
+ gpio4: gpio@53f90000 {
compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
reg = <0x53f90000 0x4000>;
interrupts = <56 57>;
status = "disabled";
};
- uart0: uart@53fbc000 { /* UART1 */
+ uart1: uart@53fbc000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
status = "disabled";
};
- uart1: uart@53fc0000 { /* UART2 */
+ uart2: uart@53fc0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
status = "disabled";
};
- gpio4: gpio@53fdc000 { /* GPIO5 */
+ gpio5: gpio@53fdc000 {
compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
reg = <0x53fdc000 0x4000>;
interrupts = <103 104>;
#interrupt-cells = <1>;
};
- gpio5: gpio@53fe0000 { /* GPIO6 */
+ gpio6: gpio@53fe0000 {
compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
reg = <0x53fe0000 0x4000>;
interrupts = <105 106>;
#interrupt-cells = <1>;
};
- gpio6: gpio@53fe4000 { /* GPIO7 */
+ gpio7: gpio@53fe4000 {
compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
reg = <0x53fe4000 0x4000>;
interrupts = <107 108>;
status = "disabled";
};
- uart3: uart@53ff0000 { /* UART4 */
+ uart4: uart@53ff0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
reg = <0x60000000 0x10000000>;
ranges;
- uart4: uart@63f90000 { /* UART5 */
+ uart5: uart@63f90000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
/include/ "imx6q.dtsi"
/ {
- model = "Freescale i.MX6 Quad SABRE Automotive Board";
- compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+ model = "Freescale i.MX6 Quad Armadillo2 Board";
+ compatible = "fsl,imx6q-arm2", "fsl,imx6q";
chosen {
bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
};
usdhc@02198000 { /* uSDHC3 */
- cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */
- wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */
+ cd-gpios = <&gpio6 11 0>;
+ wp-gpios = <&gpio6 14 0>;
status = "okay";
};
status = "okay";
};
- uart3: uart@021f0000 { /* UART4 */
+ uart4: uart@021f0000 {
status = "okay";
};
};
debug-led {
label = "Heartbeat";
- gpios = <&gpio2 25 0>; /* GPIO3_25 */
+ gpios = <&gpio3 25 0>;
linux,default-trigger = "heartbeat";
};
};
--- /dev/null
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad SABRE Lite Board";
+ compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ soc {
+ aips-bus@02100000 { /* AIPS2 */
+ enet@02188000 {
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 23 0>;
+ status = "okay";
+ };
+
+ usdhc@02198000 { /* uSDHC3 */
+ cd-gpios = <&gpio7 0 0>;
+ wp-gpios = <&gpio7 1 0>;
+ status = "okay";
+ };
+
+ usdhc@0219c000 { /* uSDHC4 */
+ cd-gpios = <&gpio2 6 0>;
+ wp-gpios = <&gpio2 7 0>;
+ status = "okay";
+ };
+
+ uart2: uart@021e8000 {
+ status = "okay";
+ };
+ };
+ };
+};
/ {
aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
};
cpus {
status = "disabled";
};
- uart0: uart@02020000 { /* UART1 */
+ uart1: uart@02020000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
interrupts = <0 55 0x04>;
};
- gpio0: gpio@0209c000 { /* GPIO1 */
+ gpio1: gpio@0209c000 {
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <0 66 0x04 0 67 0x04>;
#interrupt-cells = <1>;
};
- gpio1: gpio@020a0000 { /* GPIO2 */
+ gpio2: gpio@020a0000 {
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <0 68 0x04 0 69 0x04>;
#interrupt-cells = <1>;
};
- gpio2: gpio@020a4000 { /* GPIO3 */
+ gpio3: gpio@020a4000 {
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <0 70 0x04 0 71 0x04>;
#interrupt-cells = <1>;
};
- gpio3: gpio@020a8000 { /* GPIO4 */
+ gpio4: gpio@020a8000 {
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <0 72 0x04 0 73 0x04>;
#interrupt-cells = <1>;
};
- gpio4: gpio@020ac000 { /* GPIO5 */
+ gpio5: gpio@020ac000 {
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <0 74 0x04 0 75 0x04>;
#interrupt-cells = <1>;
};
- gpio5: gpio@020b0000 { /* GPIO6 */
+ gpio6: gpio@020b0000 {
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020b0000 0x4000>;
interrupts = <0 76 0x04 0 77 0x04>;
#interrupt-cells = <1>;
};
- gpio6: gpio@020b4000 { /* GPIO7 */
+ gpio7: gpio@020b4000 {
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020b4000 0x4000>;
interrupts = <0 78 0x04 0 79 0x04>;
interrupts = <0 18 0x04>;
};
- uart1: uart@021e8000 { /* UART2 */
+ uart2: uart@021e8000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
interrupts = <0 27 0x04>;
status = "disabled";
};
- uart2: uart@021ec000 { /* UART3 */
+ uart3: uart@021ec000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
interrupts = <0 28 0x04>;
status = "disabled";
};
- uart3: uart@021f0000 { /* UART4 */
+ uart4: uart@021f0000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
interrupts = <0 29 0x04>;
status = "disabled";
};
- uart4: uart@021f4000 { /* UART5 */
+ uart5: uart@021f4000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
interrupts = <0 30 0x04>;
config ARM_GIC
select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
+ bool
+
+config GIC_NON_BANKED
bool
config ARM_VIC
+ select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
bool
config ARM_VIC_NR
#include <linux/slab.h>
#include <asm/irq.h>
+#include <asm/exception.h>
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>
-static DEFINE_RAW_SPINLOCK(irq_controller_lock);
+union gic_base {
+ void __iomem *common_base;
+ void __percpu __iomem **percpu_base;
+};
-/* Address of GIC 0 CPU interface */
-void __iomem *gic_cpu_base_addr __read_mostly;
+struct gic_chip_data {
+ unsigned int irq_offset;
+ union gic_base dist_base;
+ union gic_base cpu_base;
+#ifdef CONFIG_CPU_PM
+ u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+ u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
+ u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
+ u32 __percpu *saved_ppi_enable;
+ u32 __percpu *saved_ppi_conf;
+#endif
+#ifdef CONFIG_IRQ_DOMAIN
+ struct irq_domain domain;
+#endif
+ unsigned int gic_irqs;
+#ifdef CONFIG_GIC_NON_BANKED
+ void __iomem *(*get_base)(union gic_base *);
+#endif
+};
+
+static DEFINE_RAW_SPINLOCK(irq_controller_lock);
/*
* Supported arch specific GIC irq extension.
static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;
+#ifdef CONFIG_GIC_NON_BANKED
+static void __iomem *gic_get_percpu_base(union gic_base *base)
+{
+ return *__this_cpu_ptr(base->percpu_base);
+}
+
+static void __iomem *gic_get_common_base(union gic_base *base)
+{
+ return base->common_base;
+}
+
+static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data)
+{
+ return data->get_base(&data->dist_base);
+}
+
+static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data)
+{
+ return data->get_base(&data->cpu_base);
+}
+
+static inline void gic_set_base_accessor(struct gic_chip_data *data,
+ void __iomem *(*f)(union gic_base *))
+{
+ data->get_base = f;
+}
+#else
+#define gic_data_dist_base(d) ((d)->dist_base.common_base)
+#define gic_data_cpu_base(d) ((d)->cpu_base.common_base)
+#define gic_set_base_accessor(d,f)
+#endif
+
static inline void __iomem *gic_dist_base(struct irq_data *d)
{
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
- return gic_data->dist_base;
+ return gic_data_dist_base(gic_data);
}
static inline void __iomem *gic_cpu_base(struct irq_data *d)
{
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
- return gic_data->cpu_base;
+ return gic_data_cpu_base(gic_data);
}
static inline unsigned int gic_irq(struct irq_data *d)
#define gic_set_wake NULL
#endif
+asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+{
+ u32 irqstat, irqnr;
+ struct gic_chip_data *gic = &gic_data[0];
+ void __iomem *cpu_base = gic_data_cpu_base(gic);
+
+ do {
+ irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
+ irqnr = irqstat & ~0x1c00;
+
+ if (likely(irqnr > 15 && irqnr < 1021)) {
+ irqnr = irq_domain_to_irq(&gic->domain, irqnr);
+ handle_IRQ(irqnr, regs);
+ continue;
+ }
+ if (irqnr < 16) {
+ writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
+#ifdef CONFIG_SMP
+ handle_IPI(irqnr, regs);
+#endif
+ continue;
+ }
+ break;
+ } while (1);
+}
+
static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
{
struct gic_chip_data *chip_data = irq_get_handler_data(irq);
chained_irq_enter(chip, desc);
raw_spin_lock(&irq_controller_lock);
- status = readl_relaxed(chip_data->cpu_base + GIC_CPU_INTACK);
+ status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK);
raw_spin_unlock(&irq_controller_lock);
gic_irq = (status & 0x3ff);
u32 cpumask;
unsigned int gic_irqs = gic->gic_irqs;
struct irq_domain *domain = &gic->domain;
- void __iomem *base = gic->dist_base;
+ void __iomem *base = gic_data_dist_base(gic);
u32 cpu = 0;
#ifdef CONFIG_SMP
static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
{
- void __iomem *dist_base = gic->dist_base;
- void __iomem *base = gic->cpu_base;
+ void __iomem *dist_base = gic_data_dist_base(gic);
+ void __iomem *base = gic_data_cpu_base(gic);
int i;
/*
BUG();
gic_irqs = gic_data[gic_nr].gic_irqs;
- dist_base = gic_data[gic_nr].dist_base;
+ dist_base = gic_data_dist_base(&gic_data[gic_nr]);
if (!dist_base)
return;
BUG();
gic_irqs = gic_data[gic_nr].gic_irqs;
- dist_base = gic_data[gic_nr].dist_base;
+ dist_base = gic_data_dist_base(&gic_data[gic_nr]);
if (!dist_base)
return;
if (gic_nr >= MAX_GIC_NR)
BUG();
- dist_base = gic_data[gic_nr].dist_base;
- cpu_base = gic_data[gic_nr].cpu_base;
+ dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+ cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
if (!dist_base || !cpu_base)
return;
if (gic_nr >= MAX_GIC_NR)
BUG();
- dist_base = gic_data[gic_nr].dist_base;
- cpu_base = gic_data[gic_nr].cpu_base;
+ dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+ cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
if (!dist_base || !cpu_base)
return;
int i;
for (i = 0; i < MAX_GIC_NR; i++) {
+#ifdef CONFIG_GIC_NON_BANKED
+ /* Skip over unused GICs */
+ if (!gic_data[i].get_base)
+ continue;
+#endif
switch (cmd) {
case CPU_PM_ENTER:
gic_cpu_save(i);
#endif
};
-void __init gic_init(unsigned int gic_nr, int irq_start,
- void __iomem *dist_base, void __iomem *cpu_base)
+void __init gic_init_bases(unsigned int gic_nr, int irq_start,
+ void __iomem *dist_base, void __iomem *cpu_base,
+ u32 percpu_offset)
{
struct gic_chip_data *gic;
struct irq_domain *domain;
gic = &gic_data[gic_nr];
domain = &gic->domain;
- gic->dist_base = dist_base;
- gic->cpu_base = cpu_base;
+#ifdef CONFIG_GIC_NON_BANKED
+ if (percpu_offset) { /* Frankein-GIC without banked registers... */
+ unsigned int cpu;
+
+ gic->dist_base.percpu_base = alloc_percpu(void __iomem *);
+ gic->cpu_base.percpu_base = alloc_percpu(void __iomem *);
+ if (WARN_ON(!gic->dist_base.percpu_base ||
+ !gic->cpu_base.percpu_base)) {
+ free_percpu(gic->dist_base.percpu_base);
+ free_percpu(gic->cpu_base.percpu_base);
+ return;
+ }
+
+ for_each_possible_cpu(cpu) {
+ unsigned long offset = percpu_offset * cpu_logical_map(cpu);
+ *per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset;
+ *per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset;
+ }
+
+ gic_set_base_accessor(gic, gic_get_percpu_base);
+ } else
+#endif
+ { /* Normal, sane GIC... */
+ WARN(percpu_offset,
+ "GIC_NON_BANKED not enabled, ignoring %08x offset!",
+ percpu_offset);
+ gic->dist_base.common_base = dist_base;
+ gic->cpu_base.common_base = cpu_base;
+ gic_set_base_accessor(gic, gic_get_common_base);
+ }
/*
* For primary GICs, skip over SGIs.
*/
domain->hwirq_base = 32;
if (gic_nr == 0) {
- gic_cpu_base_addr = cpu_base;
-
if ((irq_start & 31) > 0) {
domain->hwirq_base = 16;
if (irq_start != -1)
* Find out how many interrupts are supported.
* The GIC only supports up to 1020 interrupt sources.
*/
- gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f;
+ gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
gic_irqs = (gic_irqs + 1) * 32;
if (gic_irqs > 1020)
gic_irqs = 1020;
dsb();
/* this always happens on GIC0 */
- writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
+ writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
}
#endif
{
void __iomem *cpu_base;
void __iomem *dist_base;
+ u32 percpu_offset;
int irq;
struct irq_domain *domain = &gic_data[gic_cnt].domain;
cpu_base = of_iomap(node, 1);
WARN(!cpu_base, "unable to map gic cpu registers\n");
+ if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
+ percpu_offset = 0;
+
domain->of_node = of_node_get(node);
- gic_init(gic_cnt, -1, dist_base, cpu_base);
+ gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset);
if (parent) {
irq = irq_of_parse_and_map(node, 0);
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/syscore_ops.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
+#include <asm/exception.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
-#ifdef CONFIG_PM
/**
* struct vic_device - VIC PM device
* @irq: The IRQ number for the base of the VIC.
* @int_enable: Save for VIC_INT_ENABLE.
* @soft_int: Save for VIC_INT_SOFT.
* @protect: Save for VIC_PROTECT.
+ * @domain: The IRQ domain for the VIC.
*/
struct vic_device {
void __iomem *base;
u32 int_enable;
u32 soft_int;
u32 protect;
+ struct irq_domain domain;
};
/* we cannot allocate memory when VICs are initially registered */
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
static int vic_id;
-#endif /* CONFIG_PM */
/**
* vic_init2 - common initialisation code
return 0;
}
late_initcall(vic_pm_init);
+#endif /* CONFIG_PM */
/**
- * vic_pm_register - Register a VIC for later power management control
+ * vic_register() - Register a VIC.
* @base: The base address of the VIC.
* @irq: The base IRQ for the VIC.
* @resume_sources: bitmask of interrupts allowed for resume sources.
+ * @node: The device tree node associated with the VIC.
*
* Register the VIC with the system device tree so that it can be notified
* of suspend and resume requests and ensure that the correct actions are
* taken to re-instate the settings on resume.
+ *
+ * This also configures the IRQ domain for the VIC.
*/
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+static void __init vic_register(void __iomem *base, unsigned int irq,
+ u32 resume_sources, struct device_node *node)
{
struct vic_device *v;
- if (vic_id >= ARRAY_SIZE(vic_devices))
+ if (vic_id >= ARRAY_SIZE(vic_devices)) {
printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
- else {
- v = &vic_devices[vic_id];
- v->base = base;
- v->resume_sources = resume_sources;
- v->irq = irq;
- vic_id++;
+ return;
}
+
+ v = &vic_devices[vic_id];
+ v->base = base;
+ v->resume_sources = resume_sources;
+ v->irq = irq;
+ vic_id++;
+
+ v->domain.irq_base = irq;
+ v->domain.nr_irq = 32;
+#ifdef CONFIG_OF_IRQ
+ v->domain.of_node = of_node_get(node);
+ v->domain.ops = &irq_domain_simple_ops;
+#endif /* CONFIG_OF */
+ irq_domain_add(&v->domain);
}
-#else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-#endif /* CONFIG_PM */
static void vic_ack_irq(struct irq_data *d)
{
void __iomem *base = irq_data_get_irq_chip_data(d);
- unsigned int irq = d->irq & 31;
+ unsigned int irq = d->hwirq;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
/* moreover, clear the soft-triggered, in case it was the reason */
writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
static void vic_mask_irq(struct irq_data *d)
{
void __iomem *base = irq_data_get_irq_chip_data(d);
- unsigned int irq = d->irq & 31;
+ unsigned int irq = d->hwirq;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
}
static void vic_unmask_irq(struct irq_data *d)
{
void __iomem *base = irq_data_get_irq_chip_data(d);
- unsigned int irq = d->irq & 31;
+ unsigned int irq = d->hwirq;
writel(1 << irq, base + VIC_INT_ENABLE);
}
static int vic_set_wake(struct irq_data *d, unsigned int on)
{
struct vic_device *v = vic_from_irq(d->irq);
- unsigned int off = d->irq & 31;
+ unsigned int off = d->hwirq;
u32 bit = 1 << off;
if (!v)
* and 020 within the page. We call this "second block".
*/
static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
- u32 vic_sources)
+ u32 vic_sources, struct device_node *node)
{
unsigned int i;
int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
}
vic_set_irq_sources(base, irq_start, vic_sources);
+ vic_register(base, irq_start, 0, node);
}
-/**
- * vic_init - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
- u32 vic_sources, u32 resume_sources)
+static void __init __vic_init(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources, u32 resume_sources,
+ struct device_node *node)
{
unsigned int i;
u32 cellid = 0;
switch(vendor) {
case AMBA_VENDOR_ST:
- vic_init_st(base, irq_start, vic_sources);
+ vic_init_st(base, irq_start, vic_sources, node);
return;
default:
printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
vic_set_irq_sources(base, irq_start, vic_sources);
- vic_pm_register(base, irq_start, resume_sources);
+ vic_register(base, irq_start, resume_sources, node);
+}
+
+/**
+ * vic_init() - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources, u32 resume_sources)
+{
+ __vic_init(base, irq_start, vic_sources, resume_sources, NULL);
+}
+
+#ifdef CONFIG_OF
+int __init vic_of_init(struct device_node *node, struct device_node *parent)
+{
+ void __iomem *regs;
+ int irq_base;
+
+ if (WARN(parent, "non-root VICs are not supported"))
+ return -EINVAL;
+
+ regs = of_iomap(node, 0);
+ if (WARN_ON(!regs))
+ return -EIO;
+
+ irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
+ if (WARN_ON(irq_base < 0))
+ goto out_unmap;
+
+ __vic_init(regs, irq_base, ~0, ~0, node);
+
+ return 0;
+
+ out_unmap:
+ iounmap(regs);
+
+ return -EIO;
+}
+#endif /* CONFIG OF */
+
+/*
+ * Handle each interrupt in a single VIC. Returns non-zero if we've
+ * handled at least one interrupt. This does a single read of the
+ * status register and handles all interrupts in order from LSB first.
+ */
+static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
+{
+ u32 stat, irq;
+ int handled = 0;
+
+ stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
+ while (stat) {
+ irq = ffs(stat) - 1;
+ handle_IRQ(irq_domain_to_irq(&vic->domain, irq), regs);
+ stat &= ~(1 << irq);
+ handled = 1;
+ }
+
+ return handled;
+}
+
+/*
+ * Keep iterating over all registered VIC's until there are no pending
+ * interrupts.
+ */
+asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
+{
+ int i, handled;
+
+ do {
+ for (i = 0, handled = 0; i < vic_id; ++i)
+ handled |= handle_one_vic(&vic_devices[i], regs);
+ } while (handled);
}
#define ALT_UP_B(label) b label
#endif
+/*
+ * Instruction barrier
+ */
+ .macro instr_sync
+#if __LINUX_ARM_ARCH__ >= 7
+ isb
+#elif __LINUX_ARM_ARCH__ == 6
+ mcr p15, 0, r0, c7, c5, 4
+#endif
+ .endm
+
/*
* SMP data memory barrier
*/
--- /dev/null
+#ifndef __ASMARM_CTI_H
+#define __ASMARM_CTI_H
+
+#include <asm/io.h>
+
+/* The registers' definition is from section 3.2 of
+ * Embedded Cross Trigger Revision: r0p0
+ */
+#define CTICONTROL 0x000
+#define CTISTATUS 0x004
+#define CTILOCK 0x008
+#define CTIPROTECTION 0x00C
+#define CTIINTACK 0x010
+#define CTIAPPSET 0x014
+#define CTIAPPCLEAR 0x018
+#define CTIAPPPULSE 0x01c
+#define CTIINEN 0x020
+#define CTIOUTEN 0x0A0
+#define CTITRIGINSTATUS 0x130
+#define CTITRIGOUTSTATUS 0x134
+#define CTICHINSTATUS 0x138
+#define CTICHOUTSTATUS 0x13c
+#define CTIPERIPHID0 0xFE0
+#define CTIPERIPHID1 0xFE4
+#define CTIPERIPHID2 0xFE8
+#define CTIPERIPHID3 0xFEC
+#define CTIPCELLID0 0xFF0
+#define CTIPCELLID1 0xFF4
+#define CTIPCELLID2 0xFF8
+#define CTIPCELLID3 0xFFC
+
+/* The below are from section 3.6.4 of
+ * CoreSight v1.0 Architecture Specification
+ */
+#define LOCKACCESS 0xFB0
+#define LOCKSTATUS 0xFB4
+
+/* write this value to LOCKACCESS will unlock the module, and
+ * other value will lock the module
+ */
+#define LOCKCODE 0xC5ACCE55
+
+/**
+ * struct cti - cross trigger interface struct
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out_for_irq: triger out number which will cause
+ * the @irq happen
+ *
+ * cti struct used to operate cti registers.
+ */
+struct cti {
+ void __iomem *base;
+ int irq;
+ int trig_out_for_irq;
+};
+
+/**
+ * cti_init - initialize the cti instance
+ * @cti: cti instance
+ * @base: mapped virtual address for the cti base
+ * @irq: irq number for the cti
+ * @trig_out: triger out number which will cause
+ * the @irq happen
+ *
+ * called by machine code to pass the board dependent
+ * @base, @irq and @trig_out to cti.
+ */
+static inline void cti_init(struct cti *cti,
+ void __iomem *base, int irq, int trig_out)
+{
+ cti->base = base;
+ cti->irq = irq;
+ cti->trig_out_for_irq = trig_out;
+}
+
+/**
+ * cti_map_trigger - use the @chan to map @trig_in to @trig_out
+ * @cti: cti instance
+ * @trig_in: trigger in number
+ * @trig_out: trigger out number
+ * @channel: channel number
+ *
+ * This function maps one trigger in of @trig_in to one trigger
+ * out of @trig_out using the channel @chan.
+ */
+static inline void cti_map_trigger(struct cti *cti,
+ int trig_in, int trig_out, int chan)
+{
+ void __iomem *base = cti->base;
+ unsigned long val;
+
+ val = __raw_readl(base + CTIINEN + trig_in * 4);
+ val |= BIT(chan);
+ __raw_writel(val, base + CTIINEN + trig_in * 4);
+
+ val = __raw_readl(base + CTIOUTEN + trig_out * 4);
+ val |= BIT(chan);
+ __raw_writel(val, base + CTIOUTEN + trig_out * 4);
+}
+
+/**
+ * cti_enable - enable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_enable(struct cti *cti)
+{
+ __raw_writel(0x1, cti->base + CTICONTROL);
+}
+
+/**
+ * cti_disable - disable the cti module
+ * @cti: cti instance
+ *
+ * enable the cti module
+ */
+static inline void cti_disable(struct cti *cti)
+{
+ __raw_writel(0, cti->base + CTICONTROL);
+}
+
+/**
+ * cti_irq_ack - clear the cti irq
+ * @cti: cti instance
+ *
+ * clear the cti irq
+ */
+static inline void cti_irq_ack(struct cti *cti)
+{
+ void __iomem *base = cti->base;
+ unsigned long val;
+
+ val = __raw_readl(base + CTIINTACK);
+ val |= BIT(cti->trig_out_for_irq);
+ __raw_writel(val, base + CTIINTACK);
+}
+
+/**
+ * cti_unlock - unlock cti module
+ * @cti: cti instance
+ *
+ * unlock the cti module, or else any writes to the cti
+ * module is not allowed.
+ */
+static inline void cti_unlock(struct cti *cti)
+{
+ void __iomem *base = cti->base;
+ unsigned long val;
+
+ val = __raw_readl(base + LOCKSTATUS);
+
+ if (val & 1) {
+ val = LOCKCODE;
+ __raw_writel(val, base + LOCKACCESS);
+ }
+}
+
+/**
+ * cti_lock - lock cti module
+ * @cti: cti instance
+ *
+ * lock the cti module, so any writes to the cti
+ * module will be not allowed.
+ */
+static inline void cti_lock(struct cti *cti)
+{
+ void __iomem *base = cti->base;
+ unsigned long val;
+
+ val = __raw_readl(base + LOCKSTATUS);
+
+ if (!(val & 1)) {
+ val = ~LOCKCODE;
+ __raw_writel(val, base + LOCKACCESS);
+ }
+}
+#endif
+++ /dev/null
-/* arch/arm/include/asm/entry-macro-vic2.S
- *
- * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Low-level IRQ helper macros for a device with two VICs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/* This should be included from <mach/entry-macro.S> with the necessary
- * defines for virtual addresses and IRQ bases for the two vics.
- *
- * The code needs the following defined:
- * IRQ_VIC0_BASE IRQ number of VIC0's first IRQ
- * IRQ_VIC1_BASE IRQ number of VIC1's first IRQ
- * VA_VIC0 Virtual address of VIC0
- * VA_VIC1 Virtual address of VIC1
- *
- * Note, code assumes VIC0's virtual address is an ARM immediate constant
- * away from VIC1.
-*/
-
-#include <asm/hardware/vic.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =VA_VIC0
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- @ check the vic0
- mov \irqnr, #IRQ_VIC0_BASE + 31
- ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
- teq \irqstat, #0
-
- @ otherwise try vic1
- addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
- addeq \irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE)
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
+++ /dev/null
-/*
- * arch/arm/include/asm/hardware/entry-macro-gic.S
- *
- * Low-level IRQ helper macros for GIC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/gic.h>
-
-#ifndef HAVE_GET_IRQNR_PREAMBLE
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =gic_cpu_base_addr
- ldr \base, [\base]
- .endm
-#endif
-
-/*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Interrupts 0-15 are IPI
- * 16-31 are local. We allow 30 to be used for the watchdog.
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * A simple read from the controller will tell us the number of the highest
- * priority enabled interrupt. We then just need to check whether it is in the
- * valid range for an IRQ (30-1020 inclusive).
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK]
- /* bits 12-10 = src CPU, 9-0 = int # */
-
- ldr \tmp, =1021
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #15
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
- .endm
-
-/* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
#include <linux/irqdomain.h>
struct device_node;
-extern void __iomem *gic_cpu_base_addr;
extern struct irq_chip gic_arch_extn;
-void gic_init(unsigned int, int, void __iomem *, void __iomem *);
+void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
+ u32 offset);
int gic_of_init(struct device_node *node, struct device_node *parent);
void gic_secondary_init(unsigned int);
+void gic_handle_irq(struct pt_regs *regs);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
-struct gic_chip_data {
- void __iomem *dist_base;
- void __iomem *cpu_base;
-#ifdef CONFIG_CPU_PM
- u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
- u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
- u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
- u32 __percpu *saved_ppi_enable;
- u32 __percpu *saved_ppi_conf;
-#endif
-#ifdef CONFIG_IRQ_DOMAIN
- struct irq_domain domain;
-#endif
- unsigned int gic_irqs;
-};
+static inline void gic_init(unsigned int nr, int start,
+ void __iomem *dist , void __iomem *cpu)
+{
+ gic_init_bases(nr, start, dist, cpu, 0);
+}
+
#endif
#endif
#define VIC_PL192_VECT_ADDR 0xF00
#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+struct device_node;
+struct pt_regs;
+
void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
-#endif
+int vic_of_init(struct device_node *node, struct device_node *parent);
+void vic_handle_irq(struct pt_regs *regs);
+#endif /* __ASSEMBLY__ */
#endif
--- /dev/null
+#ifndef __ASM_IDMAP_H
+#define __ASM_IDMAP_H
+
+#include <linux/compiler.h>
+#include <asm/pgtable.h>
+
+/* Tag a function as requiring to be executed via an identity mapping. */
+#define __idmap __section(.idmap.text) noinline notrace
+
+extern pgd_t *idmap_pgd;
+
+void setup_mm_for_reboot(void);
+
+#endif /* __ASM_IDMAP_H */
unsigned int video_start; /* start of video RAM */
unsigned int video_end; /* end of video RAM */
- unsigned int reserve_lp0 :1; /* never has lp0 */
- unsigned int reserve_lp1 :1; /* never has lp1 */
- unsigned int reserve_lp2 :1; /* never has lp2 */
- unsigned int soft_reboot :1; /* soft reboot */
+ unsigned char reserve_lp0 :1; /* never has lp0 */
+ unsigned char reserve_lp1 :1; /* never has lp1 */
+ unsigned char reserve_lp2 :1; /* never has lp2 */
+ char restart_mode; /* default restart mode */
void (*fixup)(struct tag *, char **,
struct meminfo *);
void (*reserve)(void);/* reserve mem blocks */
#ifdef CONFIG_MULTI_IRQ_HANDLER
void (*handle_irq)(struct pt_regs *);
#endif
+ void (*restart)(char, const char *);
};
/*
#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
extern void copy_page(void *to, const void *from);
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level-types.h>
+#else
#include <asm/pgtable-2level-types.h>
+#endif
#endif /* CONFIG_MMU */
extern enum arm_perf_pmu_ids
armpmu_get_pmu_id(void);
-extern int
-armpmu_get_max_events(void);
-
#endif /* __ARM_PERF_EVENT_H__ */
#define _PAGE_USER_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
#define _PAGE_KERNEL_TABLE (PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
+#ifdef CONFIG_ARM_LPAE
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+ return (pmd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+ BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
+ free_page((unsigned long)pmd);
+}
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+ set_pud(pud, __pud(__pa(pmd) | PMD_TYPE_TABLE));
+}
+
+#else /* !CONFIG_ARM_LPAE */
+
/*
* Since we have only two-level page tables, these are trivial
*/
#define pmd_alloc_one(mm,addr) ({ BUG(); ((pmd_t *)2); })
#define pmd_free(mm, pmd) do { } while (0)
-#define pgd_populate(mm,pmd,pte) BUG()
+#define pud_populate(mm,pmd,pte) BUG()
+
+#endif /* CONFIG_ARM_LPAE */
extern pgd_t *pgd_alloc(struct mm_struct *mm);
extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
{
pmdval_t pmdval = (pte + PTE_HWTABLE_OFF) | prot;
pmdp[0] = __pmd(pmdval);
+#ifndef CONFIG_ARM_LPAE
pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
+#endif
flush_pmd_entry(pmdp);
}
#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */
#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2)
+#ifndef __ASSEMBLY__
+
+/*
+ * The "pud_xxx()" functions here are trivial when the pmd is folded into
+ * the pud: the pud entry is never bad, always exists, and can't be set or
+ * cleared.
+ */
+#define pud_none(pud) (0)
+#define pud_bad(pud) (0)
+#define pud_present(pud) (1)
+#define pud_clear(pudp) do { } while (0)
+#define set_pud(pud,pudp) do { } while (0)
+
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
+{
+ return (pmd_t *)pud;
+}
+
+#define pmd_bad(pmd) (pmd_val(pmd) & 2)
+
+#define copy_pmd(pmdpd,pmdps) \
+ do { \
+ pmdpd[0] = pmdps[0]; \
+ pmdpd[1] = pmdps[1]; \
+ flush_pmd_entry(pmdpd); \
+ } while (0)
+
+#define pmd_clear(pmdp) \
+ do { \
+ pmdp[0] = __pmd(0); \
+ pmdp[1] = __pmd(0); \
+ clean_pmd_entry(pmdp); \
+ } while (0)
+
+/* we don't need complex calculations here as the pmd is folded into the pgd */
+#define pmd_addr_end(addr,end) (end)
+
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
+
+#endif /* __ASSEMBLY__ */
+
#endif /* _ASM_PGTABLE_2LEVEL_H */
--- /dev/null
+/*
+ * arch/arm/include/asm/pgtable-3level-hwdef.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_HWDEF_H
+#define _ASM_PGTABLE_3LEVEL_HWDEF_H
+
+/*
+ * Hardware page table definitions.
+ *
+ * + Level 1/2 descriptor
+ * - common
+ */
+#define PMD_TYPE_MASK (_AT(pmdval_t, 3) << 0)
+#define PMD_TYPE_FAULT (_AT(pmdval_t, 0) << 0)
+#define PMD_TYPE_TABLE (_AT(pmdval_t, 3) << 0)
+#define PMD_TYPE_SECT (_AT(pmdval_t, 1) << 0)
+#define PMD_BIT4 (_AT(pmdval_t, 0))
+#define PMD_DOMAIN(x) (_AT(pmdval_t, 0))
+
+/*
+ * - section
+ */
+#define PMD_SECT_BUFFERABLE (_AT(pmdval_t, 1) << 2)
+#define PMD_SECT_CACHEABLE (_AT(pmdval_t, 1) << 3)
+#define PMD_SECT_S (_AT(pmdval_t, 3) << 8)
+#define PMD_SECT_AF (_AT(pmdval_t, 1) << 10)
+#define PMD_SECT_nG (_AT(pmdval_t, 1) << 11)
+#define PMD_SECT_XN (_AT(pmdval_t, 1) << 54)
+#define PMD_SECT_AP_WRITE (_AT(pmdval_t, 0))
+#define PMD_SECT_AP_READ (_AT(pmdval_t, 0))
+#define PMD_SECT_TEX(x) (_AT(pmdval_t, 0))
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define PMD_SECT_UNCACHED (_AT(pmdval_t, 0) << 2) /* strongly ordered */
+#define PMD_SECT_BUFFERED (_AT(pmdval_t, 1) << 2) /* normal non-cacheable */
+#define PMD_SECT_WT (_AT(pmdval_t, 2) << 2) /* normal inner write-through */
+#define PMD_SECT_WB (_AT(pmdval_t, 3) << 2) /* normal inner write-back */
+#define PMD_SECT_WBWA (_AT(pmdval_t, 7) << 2) /* normal inner write-alloc */
+
+/*
+ * + Level 3 descriptor (PTE)
+ */
+#define PTE_TYPE_MASK (_AT(pteval_t, 3) << 0)
+#define PTE_TYPE_FAULT (_AT(pteval_t, 0) << 0)
+#define PTE_TYPE_PAGE (_AT(pteval_t, 3) << 0)
+#define PTE_BUFFERABLE (_AT(pteval_t, 1) << 2) /* AttrIndx[0] */
+#define PTE_CACHEABLE (_AT(pteval_t, 1) << 3) /* AttrIndx[1] */
+#define PTE_EXT_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */
+#define PTE_EXT_AF (_AT(pteval_t, 1) << 10) /* Access Flag */
+#define PTE_EXT_NG (_AT(pteval_t, 1) << 11) /* nG */
+#define PTE_EXT_XN (_AT(pteval_t, 1) << 54) /* XN */
+
+/*
+ * 40-bit physical address supported.
+ */
+#define PHYS_MASK_SHIFT (40)
+#define PHYS_MASK ((1ULL << PHYS_MASK_SHIFT) - 1)
+
+#endif
--- /dev/null
+/*
+ * arch/arm/include/asm/pgtable-3level-types.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_TYPES_H
+#define _ASM_PGTABLE_3LEVEL_TYPES_H
+
+#include <asm/types.h>
+
+typedef u64 pteval_t;
+typedef u64 pmdval_t;
+typedef u64 pgdval_t;
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { pteval_t pte; } pte_t;
+typedef struct { pmdval_t pmd; } pmd_t;
+typedef struct { pgdval_t pgd; } pgd_t;
+typedef struct { pteval_t pgprot; } pgprot_t;
+
+#define pte_val(x) ((x).pte)
+#define pmd_val(x) ((x).pmd)
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x) ((pgprot_t) { (x) } )
+
+#else /* !STRICT_MM_TYPECHECKS */
+
+typedef pteval_t pte_t;
+typedef pmdval_t pmd_t;
+typedef pgdval_t pgd_t;
+typedef pteval_t pgprot_t;
+
+#define pte_val(x) (x)
+#define pmd_val(x) (x)
+#define pgd_val(x) (x)
+#define pgprot_val(x) (x)
+
+#define __pte(x) (x)
+#define __pmd(x) (x)
+#define __pgd(x) (x)
+#define __pgprot(x) (x)
+
+#endif /* STRICT_MM_TYPECHECKS */
+
+#endif /* _ASM_PGTABLE_3LEVEL_TYPES_H */
--- /dev/null
+/*
+ * arch/arm/include/asm/pgtable-3level.h
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_PGTABLE_3LEVEL_H
+#define _ASM_PGTABLE_3LEVEL_H
+
+/*
+ * With LPAE, there are 3 levels of page tables. Each level has 512 entries of
+ * 8 bytes each, occupying a 4K page. The first level table covers a range of
+ * 512GB, each entry representing 1GB. Since we are limited to 4GB input
+ * address range, only 4 entries in the PGD are used.
+ *
+ * There are enough spare bits in a page table entry for the kernel specific
+ * state.
+ */
+#define PTRS_PER_PTE 512
+#define PTRS_PER_PMD 512
+#define PTRS_PER_PGD 4
+
+#define PTE_HWTABLE_PTRS (PTRS_PER_PTE)
+#define PTE_HWTABLE_OFF (0)
+#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u64))
+
+/*
+ * PGDIR_SHIFT determines the size a top-level page table entry can map.
+ */
+#define PGDIR_SHIFT 30
+
+/*
+ * PMD_SHIFT determines the size a middle-level page table entry can map.
+ */
+#define PMD_SHIFT 21
+
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT 21
+#define SECTION_SIZE (1UL << SECTION_SHIFT)
+#define SECTION_MASK (~(SECTION_SIZE-1))
+
+#define USER_PTRS_PER_PGD (PAGE_OFFSET / PGDIR_SIZE)
+
+/*
+ * "Linux" PTE definitions for LPAE.
+ *
+ * These bits overlap with the hardware bits but the naming is preserved for
+ * consistency with the classic page table format.
+ */
+#define L_PTE_PRESENT (_AT(pteval_t, 3) << 0) /* Valid */
+#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */
+#define L_PTE_BUFFERABLE (_AT(pteval_t, 1) << 2) /* AttrIndx[0] */
+#define L_PTE_CACHEABLE (_AT(pteval_t, 1) << 3) /* AttrIndx[1] */
+#define L_PTE_USER (_AT(pteval_t, 1) << 6) /* AP[1] */
+#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) /* AP[2] */
+#define L_PTE_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */
+#define L_PTE_YOUNG (_AT(pteval_t, 1) << 10) /* AF */
+#define L_PTE_XN (_AT(pteval_t, 1) << 54) /* XN */
+#define L_PTE_DIRTY (_AT(pteval_t, 1) << 55) /* unused */
+#define L_PTE_SPECIAL (_AT(pteval_t, 1) << 56) /* unused */
+
+/*
+ * To be used in assembly code with the upper page attributes.
+ */
+#define L_PTE_XN_HIGH (1 << (54 - 32))
+#define L_PTE_DIRTY_HIGH (1 << (55 - 32))
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0) << 2) /* strongly ordered */
+#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 1) << 2) /* normal non-cacheable */
+#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 2) << 2) /* normal inner write-through */
+#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 3) << 2) /* normal inner write-back */
+#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 7) << 2) /* normal inner write-alloc */
+#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 4) << 2) /* device */
+#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 4) << 2) /* device */
+#define L_PTE_MT_DEV_WC (_AT(pteval_t, 1) << 2) /* normal non-cacheable */
+#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 3) << 2) /* normal inner write-back */
+#define L_PTE_MT_MASK (_AT(pteval_t, 7) << 2)
+
+/*
+ * Software PGD flags.
+ */
+#define L_PGD_SWAPPER (_AT(pgdval_t, 1) << 55) /* swapper_pg_dir entry */
+
+#ifndef __ASSEMBLY__
+
+#define pud_none(pud) (!pud_val(pud))
+#define pud_bad(pud) (!(pud_val(pud) & 2))
+#define pud_present(pud) (pud_val(pud))
+
+#define pud_clear(pudp) \
+ do { \
+ *pudp = __pud(0); \
+ clean_pmd_entry(pudp); \
+ } while (0)
+
+#define set_pud(pudp, pud) \
+ do { \
+ *pudp = pud; \
+ flush_pmd_entry(pudp); \
+ } while (0)
+
+static inline pmd_t *pud_page_vaddr(pud_t pud)
+{
+ return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK);
+}
+
+/* Find an entry in the second-level page table.. */
+#define pmd_index(addr) (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
+{
+ return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(addr);
+}
+
+#define pmd_bad(pmd) (!(pmd_val(pmd) & 2))
+
+#define copy_pmd(pmdpd,pmdps) \
+ do { \
+ *pmdpd = *pmdps; \
+ flush_pmd_entry(pmdpd); \
+ } while (0)
+
+#define pmd_clear(pmdp) \
+ do { \
+ *pmdp = __pmd(0); \
+ clean_pmd_entry(pmdp); \
+ } while (0)
+
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,__pte(pte_val(pte)|(ext)))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_3LEVEL_H */
#ifndef _ASMARM_PGTABLE_HWDEF_H
#define _ASMARM_PGTABLE_HWDEF_H
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level-hwdef.h>
+#else
#include <asm/pgtable-2level-hwdef.h>
+#endif
#endif
#define _ASMARM_PGTABLE_H
#include <linux/const.h>
-#include <asm-generic/4level-fixup.h>
#include <asm/proc-fns.h>
#ifndef CONFIG_MMU
+#include <asm-generic/4level-fixup.h>
#include "pgtable-nommu.h"
#else
+#include <asm-generic/pgtable-nopud.h>
#include <asm/memory.h>
-#include <mach/vmalloc.h>
#include <asm/pgtable-hwdef.h>
+#ifdef CONFIG_ARM_LPAE
+#include <asm/pgtable-3level.h>
+#else
#include <asm/pgtable-2level.h>
+#endif
/*
* Just any arbitrary offset to the start of the vmalloc VM area: the
* any out-of-bounds memory accesses will hopefully be caught.
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
* area for the same reason. ;)
- *
- * Note that platforms may override VMALLOC_START, but they must provide
- * VMALLOC_END. VMALLOC_END defines the (exclusive) limit of this space,
- * which may not overlap IO space.
*/
-#ifndef VMALLOC_START
#define VMALLOC_OFFSET (8*1024*1024)
#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END 0xff000000UL
+
+/* This is a temporary hack until shmobile's DMA area size is sorted out */
+#ifdef CONFIG_ARCH_SHMOBILE
+#warning "SH-Mobile's consistent DMA size conflicts with VMALLOC_END by 144MB"
+#undef VMALLOC_END
+#define VMALLOC_END 0xF6000000UL
#endif
#define LIBRARY_TEXT_START 0x0c000000
/* to find an entry in a kernel page-table-directory */
#define pgd_offset_k(addr) pgd_offset(&init_mm, addr)
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-#define pgd_none(pgd) (0)
-#define pgd_bad(pgd) (0)
-#define pgd_present(pgd) (1)
-#define pgd_clear(pgdp) do { } while (0)
-#define set_pgd(pgd,pgdp) do { } while (0)
-#define set_pud(pud,pudp) do { } while (0)
-
-
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(dir, addr) ((pmd_t *)(dir))
-
#define pmd_none(pmd) (!pmd_val(pmd))
#define pmd_present(pmd) (pmd_val(pmd))
-#define pmd_bad(pmd) (pmd_val(pmd) & 2)
-
-#define copy_pmd(pmdpd,pmdps) \
- do { \
- pmdpd[0] = pmdps[0]; \
- pmdpd[1] = pmdps[1]; \
- flush_pmd_entry(pmdpd); \
- } while (0)
-
-#define pmd_clear(pmdp) \
- do { \
- pmdp[0] = __pmd(0); \
- pmdp[1] = __pmd(0); \
- clean_pmd_entry(pmdp); \
- } while (0)
static inline pte_t *pmd_page_vaddr(pmd_t pmd)
{
#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
-/* we don't need complex calculations here as the pmd is folded into the pgd */
-#define pmd_addr_end(addr,end) (end)
-
-
#ifndef CONFIG_HIGHPTE
#define __pte_map(pmd) pmd_page_vaddr(*(pmd))
#define __pte_unmap(pte) do { } while (0)
#define pte_page(pte) pfn_to_page(pte_pfn(pte))
#define mk_pte(page,prot) pfn_pte(page_to_pfn(page), prot)
-#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0)
#if __LINUX_ARM_ARCH__ < 6
#define pgtable_cache_init() do { } while (0)
-void identity_mapping_add(pgd_t *, unsigned long, unsigned long);
-void identity_mapping_del(pgd_t *, unsigned long, unsigned long);
-
#endif /* !__ASSEMBLY__ */
#endif /* CONFIG_MMU */
/*
* struct arm_pmu_platdata - ARM PMU platform data
*
- * @handle_irq: an optional handler which will be called from the interrupt and
- * passed the address of the low level handler, and can be used to implement
- * any platform specific handling before or after calling it.
+ * @handle_irq: an optional handler which will be called from the
+ * interrupt and passed the address of the low level handler,
+ * and can be used to implement any platform specific handling
+ * before or after calling it.
+ * @enable_irq: an optional handler which will be called after
+ * request_irq and be used to handle some platform specific
+ * irq enablement
+ * @disable_irq: an optional handler which will be called before
+ * free_irq and be used to handle some platform specific
+ * irq disablement
*/
struct arm_pmu_platdata {
irqreturn_t (*handle_irq)(int irq, void *dev,
irq_handler_t pmu_handler);
+ void (*enable_irq)(int irq);
+ void (*disable_irq)(int irq);
};
#ifdef CONFIG_CPU_HAS_PMU
* Set a possibly extended PTE. Non-extended PTEs should
* ignore 'ext'.
*/
+#ifdef CONFIG_ARM_LPAE
+ void (*set_pte_ext)(pte_t *ptep, pte_t pte);
+#else
void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
+#endif
/* Suspend/resume */
unsigned int suspend_size;
extern int cpu_do_idle(void);
extern void cpu_dcache_clean_area(void *, int);
extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+#ifdef CONFIG_ARM_LPAE
+extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte);
+#else
extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+#endif
extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
/* These three are private to arch/arm/kernel/suspend.c */
#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
+#ifdef CONFIG_ARM_LPAE
+#define cpu_get_pgd() \
+ ({ \
+ unsigned long pg, pg2; \
+ __asm__("mrrc p15, 0, %0, %1, c2" \
+ : "=r" (pg), "=r" (pg2) \
+ : \
+ : "cc"); \
+ pg &= ~(PTRS_PER_PGD*sizeof(pgd_t)-1); \
+ (pgd_t *)phys_to_virt(pg); \
+ })
+#else
#define cpu_get_pgd() \
({ \
unsigned long pg; \
pg &= ~0x3fff; \
(pgd_t *)phys_to_virt(pg); \
})
+#endif
#endif
void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
unsigned long err, unsigned long trap);
+#ifdef CONFIG_ARM_LPAE
+#define FAULT_CODE_ALIGNMENT 33
+#define FAULT_CODE_DEBUG 34
+#else
+#define FAULT_CODE_ALIGNMENT 1
+#define FAULT_CODE_DEBUG 2
+#endif
+
void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
struct pt_regs *),
int sig, int code, const char *name);
extern void cpu_init(void);
void arm_machine_restart(char mode, const char *cmd);
+void soft_restart(unsigned long);
extern void (*arm_pm_restart)(char str, const char *cmd);
#define UDBG_UNDEFINED (1 << 0)
tlb_remove_page(tlb, pte);
}
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
+ unsigned long addr)
+{
+#ifdef CONFIG_ARM_LPAE
+ tlb_add_flush(tlb, addr);
+ tlb_remove_page(tlb, virt_to_page(pmdp));
+#endif
+}
+
#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr)
-#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp)
+#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr)
+#define pud_free_tlb(tlb, pudp, addr) pud_free((tlb)->mm, pudp)
#define tlb_migrate_finish(mm) do { } while (0)
#ifdef CONFIG_MULTI_IRQ_HANDLER
ldr r1, =handle_arch_irq
mov r0, sp
- ldr r1, [r1]
adr lr, BSYM(9997f)
- teq r1, #0
- movne pc, r1
-#endif
+ ldr pc, [r1]
+#else
arch_irq_handler_default
+#endif
9997:
.endm
#error KERNEL_RAM_VADDR must start at 0xXXXX8000
#endif
+#ifdef CONFIG_ARM_LPAE
+ /* LPAE requires an additional page for the PGD */
+#define PG_DIR_SIZE 0x5000
+#define PMD_ORDER 3
+#else
#define PG_DIR_SIZE 0x4000
#define PMD_ORDER 2
+#endif
.globl swapper_pg_dir
.equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE
teq r0, r6
bne 1b
+#ifdef CONFIG_ARM_LPAE
+ /*
+ * Build the PGD table (first level) to point to the PMD table. A PGD
+ * entry is 64-bit wide.
+ */
+ mov r0, r4
+ add r3, r4, #0x1000 @ first PMD table address
+ orr r3, r3, #3 @ PGD block type
+ mov r6, #4 @ PTRS_PER_PGD
+ mov r7, #1 << (55 - 32) @ L_PGD_SWAPPER
+1: str r3, [r0], #4 @ set bottom PGD entry bits
+ str r7, [r0], #4 @ set top PGD entry bits
+ add r3, r3, #0x1000 @ next PMD table
+ subs r6, r6, #1
+ bne 1b
+
+ add r4, r4, #0x1000 @ point to the PMD tables
+#endif
+
ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
/*
* Create identity mapping to cater for __enable_mmu.
* This identity mapping will be removed by paging_init().
*/
- adr r0, __enable_mmu_loc
+ adr r0, __turn_mmu_on_loc
ldmia r0, {r3, r5, r6}
sub r0, r0, r3 @ virt->phys offset
- add r5, r5, r0 @ phys __enable_mmu
- add r6, r6, r0 @ phys __enable_mmu_end
+ add r5, r5, r0 @ phys __turn_mmu_on
+ add r6, r6, r0 @ phys __turn_mmu_on_end
mov r5, r5, lsr #SECTION_SHIFT
mov r6, r6, lsr #SECTION_SHIFT
#endif
/*
- * Then map boot params address in r2 or
- * the first 1MB of ram if boot params address is not specified.
+ * Then map boot params address in r2 or the first 1MB (2MB with LPAE)
+ * of ram if boot params address is not specified.
*/
mov r0, r2, lsr #SECTION_SHIFT
movs r0, r0, lsl #SECTION_SHIFT
mov r3, r7, lsr #SECTION_SHIFT
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
orr r3, r7, r3, lsl #SECTION_SHIFT
+#ifdef CONFIG_ARM_LPAE
+ mov r7, #1 << (54 - 32) @ XN
+#else
+ orr r3, r3, #PMD_SECT_XN
+#endif
1: str r3, [r0], #4
+#ifdef CONFIG_ARM_LPAE
+ str r7, [r0], #4
+#endif
add r3, r3, #1 << SECTION_SHIFT
cmp r0, r6
blo 1b
add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER)
str r3, [r0]
#endif
+#endif
+#ifdef CONFIG_ARM_LPAE
+ sub r4, r4, #0x1000 @ point to the PGD table
#endif
mov pc, lr
ENDPROC(__create_page_tables)
.ltorg
.align
-__enable_mmu_loc:
+__turn_mmu_on_loc:
.long .
- .long __enable_mmu
- .long __enable_mmu_end
+ .long __turn_mmu_on
+ .long __turn_mmu_on_end
#if defined(CONFIG_SMP)
__CPUINIT
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #CR_I
#endif
+#ifdef CONFIG_ARM_LPAE
+ mov r5, #0
+ mcrr p15, 0, r4, r5, c2 @ load TTBR0
+#else
mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
domain_val(DOMAIN_IO, DOMAIN_CLIENT))
mcr p15, 0, r5, c3, c0, 0 @ load domain access register
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
+#endif
b __turn_mmu_on
ENDPROC(__enable_mmu)
* other registers depend on the function called upon completion
*/
.align 5
-__turn_mmu_on:
+ .pushsection .idmap.text, "ax"
+ENTRY(__turn_mmu_on)
mov r0, r0
+ instr_sync
mcr p15, 0, r0, c1, c0, 0 @ write control reg
mrc p15, 0, r3, c0, c0, 0 @ read id reg
+ instr_sync
mov r3, r3
mov r3, r13
mov pc, r3
-__enable_mmu_end:
+__turn_mmu_on_end:
ENDPROC(__turn_mmu_on)
+ .popsection
#ifdef CONFIG_SMP_ON_UP
}
/* Register debug fault handler. */
- hook_fault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
- "watchpoint debug exception");
- hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
- "breakpoint debug exception");
+ hook_fault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP,
+ TRAP_HWBKPT, "watchpoint debug exception");
+ hook_ifault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP,
+ TRAP_HWBKPT, "breakpoint debug exception");
/* Register hotplug notifier. */
register_cpu_notifier(&dbg_reset_nb);
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
#include <asm/mach-types.h>
+#include <asm/system.h>
extern const unsigned char relocate_new_kernel[];
extern const unsigned int relocate_new_kernel_size;
-extern void setup_mm_for_reboot(char mode);
-
extern unsigned long kexec_start_address;
extern unsigned long kexec_indirection_page;
extern unsigned long kexec_mach_type;
if (kexec_reinit)
kexec_reinit();
- local_irq_disable();
- local_fiq_disable();
- setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
- flush_cache_all();
- outer_flush_all();
- outer_disable();
- cpu_proc_fin();
- outer_inv_all();
- flush_cache_all();
- cpu_reset(reboot_code_buffer_phys);
+
+ soft_restart(reboot_code_buffer_phys);
}
}
EXPORT_SYMBOL_GPL(armpmu_get_pmu_id);
-int
-armpmu_get_max_events(void)
+int perf_num_counters(void)
{
int max_events = 0;
return max_events;
}
-EXPORT_SYMBOL_GPL(armpmu_get_max_events);
-
-int perf_num_counters(void)
-{
- return armpmu_get_max_events();
-}
EXPORT_SYMBOL_GPL(perf_num_counters);
#define HW_OP_UNSUPPORTED 0xFFFF
{
int i, irq, irqs;
struct platform_device *pmu_device = armpmu->plat_device;
+ struct arm_pmu_platdata *plat =
+ dev_get_platdata(&pmu_device->dev);
irqs = min(pmu_device->num_resources, num_possible_cpus());
if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
continue;
irq = platform_get_irq(pmu_device, i);
- if (irq >= 0)
+ if (irq >= 0) {
+ if (plat && plat->disable_irq)
+ plat->disable_irq(irq);
free_irq(irq, armpmu);
+ }
}
release_pmu(armpmu->type);
irq);
armpmu_release_hardware(armpmu);
return err;
- }
+ } else if (plat && plat->enable_irq)
+ plat->enable_irq(irq);
cpumask_set_cpu(i, &armpmu->active_irqs);
}
* accesses/misses in hardware.
*/
static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT,
- [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6_PERFCTR_IBUF_STALL,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6_PERFCTR_LSU_FULL_STALL,
};
static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
* accesses/misses in hardware.
*/
static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
- [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6MPCORE_PERFCTR_IBUF_STALL,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6MPCORE_PERFCTR_LSU_FULL_STALL,
};
static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
* they are not available.
*/
enum armv7_perf_types {
- ARMV7_PERFCTR_PMNC_SW_INCR = 0x00,
- ARMV7_PERFCTR_IFETCH_MISS = 0x01,
- ARMV7_PERFCTR_ITLB_MISS = 0x02,
- ARMV7_PERFCTR_DCACHE_REFILL = 0x03, /* L1 */
- ARMV7_PERFCTR_DCACHE_ACCESS = 0x04, /* L1 */
- ARMV7_PERFCTR_DTLB_REFILL = 0x05,
- ARMV7_PERFCTR_DREAD = 0x06,
- ARMV7_PERFCTR_DWRITE = 0x07,
- ARMV7_PERFCTR_INSTR_EXECUTED = 0x08,
- ARMV7_PERFCTR_EXC_TAKEN = 0x09,
- ARMV7_PERFCTR_EXC_EXECUTED = 0x0A,
- ARMV7_PERFCTR_CID_WRITE = 0x0B,
- /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
+ ARMV7_PERFCTR_PMNC_SW_INCR = 0x00,
+ ARMV7_PERFCTR_L1_ICACHE_REFILL = 0x01,
+ ARMV7_PERFCTR_ITLB_REFILL = 0x02,
+ ARMV7_PERFCTR_L1_DCACHE_REFILL = 0x03,
+ ARMV7_PERFCTR_L1_DCACHE_ACCESS = 0x04,
+ ARMV7_PERFCTR_DTLB_REFILL = 0x05,
+ ARMV7_PERFCTR_MEM_READ = 0x06,
+ ARMV7_PERFCTR_MEM_WRITE = 0x07,
+ ARMV7_PERFCTR_INSTR_EXECUTED = 0x08,
+ ARMV7_PERFCTR_EXC_TAKEN = 0x09,
+ ARMV7_PERFCTR_EXC_EXECUTED = 0x0A,
+ ARMV7_PERFCTR_CID_WRITE = 0x0B,
+
+ /*
+ * ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
* It counts:
- * - all branch instructions,
+ * - all (taken) branch instructions,
* - instructions that explicitly write the PC,
* - exception generating instructions.
*/
- ARMV7_PERFCTR_PC_WRITE = 0x0C,
- ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D,
- ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E,
- ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F,
+ ARMV7_PERFCTR_PC_WRITE = 0x0C,
+ ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D,
+ ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E,
+ ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS = 0x0F,
+ ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10,
+ ARMV7_PERFCTR_CLOCK_CYCLES = 0x11,
+ ARMV7_PERFCTR_PC_BRANCH_PRED = 0x12,
/* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */
- ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10,
- ARMV7_PERFCTR_CLOCK_CYCLES = 0x11,
- ARMV7_PERFCTR_PC_BRANCH_PRED = 0x12,
- ARMV7_PERFCTR_MEM_ACCESS = 0x13,
- ARMV7_PERFCTR_L1_ICACHE_ACCESS = 0x14,
- ARMV7_PERFCTR_L1_DCACHE_WB = 0x15,
- ARMV7_PERFCTR_L2_DCACHE_ACCESS = 0x16,
- ARMV7_PERFCTR_L2_DCACHE_REFILL = 0x17,
- ARMV7_PERFCTR_L2_DCACHE_WB = 0x18,
- ARMV7_PERFCTR_BUS_ACCESS = 0x19,
- ARMV7_PERFCTR_MEMORY_ERROR = 0x1A,
- ARMV7_PERFCTR_INSTR_SPEC = 0x1B,
- ARMV7_PERFCTR_TTBR_WRITE = 0x1C,
- ARMV7_PERFCTR_BUS_CYCLES = 0x1D,
-
- ARMV7_PERFCTR_CPU_CYCLES = 0xFF
+ ARMV7_PERFCTR_MEM_ACCESS = 0x13,
+ ARMV7_PERFCTR_L1_ICACHE_ACCESS = 0x14,
+ ARMV7_PERFCTR_L1_DCACHE_WB = 0x15,
+ ARMV7_PERFCTR_L2_CACHE_ACCESS = 0x16,
+ ARMV7_PERFCTR_L2_CACHE_REFILL = 0x17,
+ ARMV7_PERFCTR_L2_CACHE_WB = 0x18,
+ ARMV7_PERFCTR_BUS_ACCESS = 0x19,
+ ARMV7_PERFCTR_MEM_ERROR = 0x1A,
+ ARMV7_PERFCTR_INSTR_SPEC = 0x1B,
+ ARMV7_PERFCTR_TTBR_WRITE = 0x1C,
+ ARMV7_PERFCTR_BUS_CYCLES = 0x1D,
+
+ ARMV7_PERFCTR_CPU_CYCLES = 0xFF
};
/* ARMv7 Cortex-A8 specific event types */
enum armv7_a8_perf_types {
- ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40,
- ARMV7_PERFCTR_L2_STORE_MERGED = 0x41,
- ARMV7_PERFCTR_L2_STORE_BUFF = 0x42,
- ARMV7_PERFCTR_L2_ACCESS = 0x43,
- ARMV7_PERFCTR_L2_CACH_MISS = 0x44,
- ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45,
- ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46,
- ARMV7_PERFCTR_MEMORY_REPLAY = 0x47,
- ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48,
- ARMV7_PERFCTR_L1_DATA_MISS = 0x49,
- ARMV7_PERFCTR_L1_INST_MISS = 0x4A,
- ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B,
- ARMV7_PERFCTR_L1_NEON_DATA = 0x4C,
- ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D,
- ARMV7_PERFCTR_L2_NEON = 0x4E,
- ARMV7_PERFCTR_L2_NEON_HIT = 0x4F,
- ARMV7_PERFCTR_L1_INST = 0x50,
- ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51,
- ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52,
- ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53,
- ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54,
- ARMV7_PERFCTR_OP_EXECUTED = 0x55,
- ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56,
- ARMV7_PERFCTR_CYCLES_INST = 0x57,
- ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58,
- ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59,
- ARMV7_PERFCTR_NEON_CYCLES = 0x5A,
-
- ARMV7_PERFCTR_PMU0_EVENTS = 0x70,
- ARMV7_PERFCTR_PMU1_EVENTS = 0x71,
- ARMV7_PERFCTR_PMU_EVENTS = 0x72,
+ ARMV7_A8_PERFCTR_L2_CACHE_ACCESS = 0x43,
+ ARMV7_A8_PERFCTR_L2_CACHE_REFILL = 0x44,
+ ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS = 0x50,
+ ARMV7_A8_PERFCTR_STALL_ISIDE = 0x56,
};
/* ARMv7 Cortex-A9 specific event types */
enum armv7_a9_perf_types {
- ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40,
- ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41,
- ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42,
-
- ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50,
- ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51,
-
- ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60,
- ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61,
- ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62,
- ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63,
- ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64,
- ARMV7_PERFCTR_DATA_EVICTION = 0x65,
- ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66,
- ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67,
- ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68,
-
- ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E,
-
- ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70,
- ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71,
- ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72,
- ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73,
- ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74,
-
- ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80,
- ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81,
- ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82,
- ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83,
- ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84,
- ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85,
- ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86,
-
- ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A,
- ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B,
-
- ARMV7_PERFCTR_ISB_INST = 0x90,
- ARMV7_PERFCTR_DSB_INST = 0x91,
- ARMV7_PERFCTR_DMB_INST = 0x92,
- ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93,
-
- ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0,
- ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1,
- ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2,
- ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3,
- ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4,
- ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5
+ ARMV7_A9_PERFCTR_INSTR_CORE_RENAME = 0x68,
+ ARMV7_A9_PERFCTR_STALL_ICACHE = 0x60,
+ ARMV7_A9_PERFCTR_STALL_DISPATCH = 0x66,
};
/* ARMv7 Cortex-A5 specific event types */
enum armv7_a5_perf_types {
- ARMV7_PERFCTR_IRQ_TAKEN = 0x86,
- ARMV7_PERFCTR_FIQ_TAKEN = 0x87,
-
- ARMV7_PERFCTR_EXT_MEM_RQST = 0xc0,
- ARMV7_PERFCTR_NC_EXT_MEM_RQST = 0xc1,
- ARMV7_PERFCTR_PREFETCH_LINEFILL = 0xc2,
- ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP = 0xc3,
- ARMV7_PERFCTR_ENTER_READ_ALLOC = 0xc4,
- ARMV7_PERFCTR_READ_ALLOC = 0xc5,
-
- ARMV7_PERFCTR_STALL_SB_FULL = 0xc9,
+ ARMV7_A5_PERFCTR_PREFETCH_LINEFILL = 0xc2,
+ ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP = 0xc3,
};
/* ARMv7 Cortex-A15 specific event types */
enum armv7_a15_perf_types {
- ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS = 0x40,
- ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS = 0x41,
- ARMV7_PERFCTR_L1_DCACHE_READ_REFILL = 0x42,
- ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL = 0x43,
+ ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ = 0x40,
+ ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE = 0x41,
+ ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ = 0x42,
+ ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE = 0x43,
- ARMV7_PERFCTR_L1_DTLB_READ_REFILL = 0x4C,
- ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL = 0x4D,
+ ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ = 0x4C,
+ ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE = 0x4D,
- ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS = 0x50,
- ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS = 0x51,
- ARMV7_PERFCTR_L2_DCACHE_READ_REFILL = 0x52,
- ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL = 0x53,
+ ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ = 0x50,
+ ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE = 0x51,
+ ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ = 0x52,
+ ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE = 0x53,
- ARMV7_PERFCTR_SPEC_PC_WRITE = 0x76,
+ ARMV7_A15_PERFCTR_PC_WRITE_SPEC = 0x76,
};
/*
* accesses/misses in hardware.
*/
static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV7_A8_PERFCTR_STALL_ISIDE,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED,
};
static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
* combined.
*/
[C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
},
[C(L1I)] = {
[C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
+ [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS,
+ [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
},
[C(LL)] = {
[C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
+ [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS,
+ [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
},
[C(BPU)] = {
[C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
* Cortex-A9 HW events mapping
*/
static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] =
- ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
- [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_DCACHE_REFILL,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_A9_PERFCTR_INSTR_CORE_RENAME,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV7_A9_PERFCTR_STALL_ICACHE,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV7_A9_PERFCTR_STALL_DISPATCH,
};
static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
* combined.
*/
[C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(L1I)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
},
[C(BPU)] = {
[C(OP_READ)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
* Cortex-A5 HW events mapping
*/
static const unsigned armv7_a5_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED,
};
static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
[C(L1D)] = {
[C(OP_READ)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_DCACHE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_DCACHE_ACCESS,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_DCACHE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
},
[C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_PREFETCH_LINEFILL,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP,
+ [C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL,
+ [C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP,
},
},
[C(L1I)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
/*
* The prefetch counters don't differentiate between the I
* side and the D side.
*/
[C(OP_PREFETCH)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_PREFETCH_LINEFILL,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP,
+ [C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL,
+ [C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP,
},
},
[C(LL)] = {
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(BPU)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
* Cortex-A15 HW events mapping
*/
static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
- [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_SPEC_PC_WRITE,
- [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
- [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+ [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_A15_PERFCTR_PC_WRITE_SPEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED,
};
static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
[C(L1D)] = {
[C(OP_READ)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_L1_DCACHE_READ_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ,
+ [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE,
+ [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
*/
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
},
[C(LL)] = {
[C(OP_READ)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_L2_DCACHE_READ_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ,
+ [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ,
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)]
- = ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL,
+ [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE,
+ [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(DTLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_L1_DTLB_READ_REFILL,
+ [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL,
+ [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
- [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(BPU)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
- [C(RESULT_MISS)]
- = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
};
static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT,
- [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION,
- [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
- [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS,
- [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT,
+ [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
+ [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = XSCALE_PERFCTR_ICACHE_NO_DELIVER,
+ [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED,
};
static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
"ARM" , "Thumb" , "Jazelle", "ThumbEE"
};
-extern void setup_mm_for_reboot(char mode);
+extern void setup_mm_for_reboot(void);
static volatile int hlt_counter;
__setup("nohlt", nohlt_setup);
__setup("hlt", hlt_setup);
-void arm_machine_restart(char mode, const char *cmd)
+extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
+typedef void (*phys_reset_t)(unsigned long);
+
+/*
+ * A temporary stack to use for CPU reset. This is static so that we
+ * don't clobber it with the identity mapping. When running with this
+ * stack, any references to the current task *will not work* so you
+ * should really do as little as possible before jumping to your reset
+ * code.
+ */
+static u64 soft_restart_stack[16];
+
+static void __soft_restart(void *addr)
{
- /* Disable interrupts first */
- local_irq_disable();
- local_fiq_disable();
+ phys_reset_t phys_reset;
- /*
- * Tell the mm system that we are going to reboot -
- * we may need it to insert some 1:1 mappings so that
- * soft boot works.
- */
- setup_mm_for_reboot(mode);
+ /* Take out a flat memory mapping. */
+ setup_mm_for_reboot();
/* Clean and invalidate caches */
flush_cache_all();
/* Push out any further dirty data, and ensure cache is empty */
flush_cache_all();
- /*
- * Now call the architecture specific reboot code.
- */
- arch_reset(mode, cmd);
+ /* Switch to the identity mapping. */
+ phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
+ phys_reset((unsigned long)addr);
- /*
- * Whoops - the architecture was unable to reboot.
- * Tell the user!
- */
- mdelay(1000);
- printk("Reboot failed -- System halted\n");
- while (1);
+ /* Should never get here. */
+ BUG();
+}
+
+void soft_restart(unsigned long addr)
+{
+ u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack);
+
+ /* Disable interrupts first */
+ local_irq_disable();
+ local_fiq_disable();
+
+ /* Disable the L2 if we're the last man standing. */
+ if (num_online_cpus() == 1)
+ outer_disable();
+
+ /* Change to the new stack and continue with the reset. */
+ call_with_stack(__soft_restart, (void *)addr, (void *)stack);
+
+ /* Should never get here. */
+ BUG();
+}
+
+void arm_machine_restart(char mode, const char *cmd)
+{
+ /* Disable interrupts first */
+ local_irq_disable();
+ local_fiq_disable();
+
+ /* Call the architecture specific reboot code. */
+ arch_reset(mode, cmd);
}
/*
void machine_restart(char *cmd)
{
machine_shutdown();
+
arm_pm_restart(reboot_mode, cmd);
+
+ /* Give a grace period for failure to restart of 1s */
+ mdelay(1000);
+
+ /* Whoops - the platform was unable to reboot. Tell the user! */
+ printk("Reboot failed -- System halted\n");
+ while (1);
}
void __show_regs(struct pt_regs *regs)
#include <linux/memblock.h>
#include <linux/bug.h>
#include <linux/compiler.h>
+#include <linux/sort.h>
#include <asm/unified.h>
#include <asm/cpu.h>
return mdesc;
}
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+ const struct membank *a = _a, *b = _b;
+ long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+ return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
void __init setup_arch(char **cmdline_p)
{
machine_desc = mdesc;
machine_name = mdesc->name;
- if (mdesc->soft_reboot)
- reboot_setup("s");
+ if (mdesc->restart_mode)
+ reboot_setup(&mdesc->restart_mode);
init_mm.start_code = (unsigned long) _text;
init_mm.end_code = (unsigned long) _etext;
parse_early_param();
+ sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
sanity_check_meminfo();
arm_memblock_init(&meminfo, mdesc);
paging_init(mdesc);
request_standard_resources(mdesc);
+ if (mdesc->restart)
+ arm_pm_restart = mdesc->restart;
+
unflatten_device_tree();
#ifdef CONFIG_SMP
* r0 = control register value
*/
.align 5
+ .pushsection .idmap.text,"ax"
ENTRY(cpu_resume_mmu)
ldr r3, =cpu_resume_after_mmu
+ instr_sync
mcr p15, 0, r0, c1, c0, 0 @ turn on MMU, I-cache, etc
mrc p15, 0, r0, c0, c0, 0 @ read id reg
+ instr_sync
mov r0, r0
mov r0, r0
mov pc, r3 @ jump to virtual address
ENDPROC(cpu_resume_mmu)
+ .popsection
cpu_resume_after_mmu:
bl cpu_init @ restore the und/abt/irq banked regs
mov r0, #0 @ return zero on success
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/exception.h>
+#include <asm/idmap.h>
#include <asm/topology.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
{
struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
struct task_struct *idle = ci->idle;
- pgd_t *pgd;
int ret;
/*
init_idle(idle, cpu);
}
- /*
- * Allocate initial page tables to allow the new CPU to
- * enable the MMU safely. This essentially means a set
- * of our "standard" page tables, with the addition of
- * a 1:1 mapping for the physical address of the kernel.
- */
- pgd = pgd_alloc(&init_mm);
- if (!pgd)
- return -ENOMEM;
-
- if (PHYS_OFFSET != PAGE_OFFSET) {
-#ifndef CONFIG_HOTPLUG_CPU
- identity_mapping_add(pgd, __pa(__init_begin), __pa(__init_end));
-#endif
- identity_mapping_add(pgd, __pa(_stext), __pa(_etext));
- identity_mapping_add(pgd, __pa(_sdata), __pa(_edata));
- }
-
/*
* We need to tell the secondary core where to find
* its stack and the page tables.
*/
secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
- secondary_data.pgdir = virt_to_phys(pgd);
+ secondary_data.pgdir = virt_to_phys(idmap_pgd);
secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir);
__cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data));
outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));
secondary_data.stack = NULL;
secondary_data.pgdir = 0;
- if (PHYS_OFFSET != PAGE_OFFSET) {
-#ifndef CONFIG_HOTPLUG_CPU
- identity_mapping_del(pgd, __pa(__init_begin), __pa(__init_end));
-#endif
- identity_mapping_del(pgd, __pa(_stext), __pa(_etext));
- identity_mapping_del(pgd, __pa(_sdata), __pa(_edata));
- }
-
- pgd_free(&init_mm, pgd);
-
return ret;
}
local_fiq_disable();
local_irq_disable();
+#ifdef CONFIG_HOTPLUG_CPU
+ platform_cpu_kill(cpu);
+#endif
+
while (1)
cpu_relax();
}
#include <linux/init.h>
+#include <asm/idmap.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <asm/memory.h>
#include <asm/suspend.h>
#include <asm/tlbflush.h>
-static pgd_t *suspend_pgd;
-
extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
extern void cpu_resume_mmu(void);
*save_ptr = virt_to_phys(ptr);
/* This must correspond to the LDM in cpu_resume() assembly */
- *ptr++ = virt_to_phys(suspend_pgd);
+ *ptr++ = virt_to_phys(idmap_pgd);
*ptr++ = sp;
*ptr++ = virt_to_phys(cpu_do_resume);
struct mm_struct *mm = current->active_mm;
int ret;
- if (!suspend_pgd)
+ if (!idmap_pgd)
return -EINVAL;
/*
return ret;
}
-
-static int __init cpu_suspend_init(void)
-{
- suspend_pgd = pgd_alloc(&init_mm);
- if (suspend_pgd) {
- unsigned long addr = virt_to_phys(cpu_resume_mmu);
- identity_mapping_add(suspend_pgd, addr, addr + SECTION_SIZE);
- }
- return suspend_pgd ? 0 : -ENOMEM;
-}
-core_initcall(cpu_suspend_init);
*(.proc.info.init) \
VMLINUX_SYMBOL(__proc_info_end) = .;
+#define IDMAP_TEXT \
+ ALIGN_FUNCTION(); \
+ VMLINUX_SYMBOL(__idmap_text_start) = .; \
+ *(.idmap.text) \
+ VMLINUX_SYMBOL(__idmap_text_end) = .;
+
#ifdef CONFIG_HOTPLUG_CPU
#define ARM_CPU_DISCARD(x)
#define ARM_CPU_KEEP(x) x
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
+ IDMAP_TEXT
#ifdef CONFIG_MMU
*(.fixup)
#endif
testchangebit.o testclearbit.o testsetbit.o \
ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
ucmpdi2.o lib1funcs.o div64.o \
- io-readsb.o io-writesb.o io-readsl.o io-writesl.o
+ io-readsb.o io-writesb.o io-readsl.o io-writesl.o \
+ call_with_stack.o
mmu-y := clear_user.o copy_page.o getuser.o putuser.o
--- /dev/null
+/*
+ * arch/arm/lib/call_with_stack.S
+ *
+ * Copyright (C) 2011 ARM Ltd.
+ * Written by Will Deacon <will.deacon@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * void call_with_stack(void (*fn)(void *), void *arg, void *sp)
+ *
+ * Change the stack to that pointed at by sp, then invoke fn(arg) with
+ * the new stack.
+ */
+ENTRY(call_with_stack)
+ str sp, [r2, #-4]!
+ str lr, [r2, #-4]!
+
+ mov sp, r2
+ mov r2, r0
+ mov r0, r1
+
+ adr lr, BSYM(1f)
+ mov pc, r2
+
+1: ldr lr, [sp]
+ ldr sp, [sp, #4]
+ mov pc, lr
+ENDPROC(call_with_stack)
#ifndef __ASSEMBLY__
-#ifndef CONFIG_ARCH_AT91X40
-#define __arch_ioremap at91_ioremap
-#define __arch_iounmap at91_iounmap
-#endif
-
-void __iomem *at91_ioremap(unsigned long phys, size_t size, unsigned int type);
-void at91_iounmap(volatile void __iomem *addr);
-
static inline unsigned int at91_sys_read(unsigned int reg_offset)
{
void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/vmalloc.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#include <mach/hardware.h>
-
-#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK)
-
-#endif
.type = MT_DEVICE,
};
-void __iomem *at91_ioremap(unsigned long p, size_t size, unsigned int type)
-{
- if (p >= AT91_BASE_SYS && p <= (AT91_BASE_SYS + SZ_16K - 1))
- return (void __iomem *)AT91_IO_P2V(p);
-
- return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
-}
-EXPORT_SYMBOL(at91_ioremap);
-
-void at91_iounmap(volatile void __iomem *addr)
-{
- unsigned long virt = (unsigned long)addr;
-
- if (virt >= VMALLOC_START && virt < VMALLOC_END)
- __iounmap(addr);
-}
-EXPORT_SYMBOL(at91_iounmap);
-
#define AT91_DBGU0 0xfffff200
#define AT91_DBGU1 0xffffee00
{
unsigned long addrVal = (unsigned long)addr;
- if (addrVal >= VMALLOC_END) {
+ if (addrVal >= CONSISTENT_BASE) {
/* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
/* dma_alloc_xxx pages are physically and virtually contiguous */
+++ /dev/null
-/*
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * Move VMALLOC_END to 0xf0000000 so that the vm space can range from
- * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
- * larger physical memory designs better.
- */
-#define VMALLOC_END 0xf0000000UL
# Object file lists.
-obj-y := irq.o mm.o time.o
+obj-y := common.o
obj-m :=
obj-n :=
obj- :=
/*
- * linux/arch/arm/mach-clps711x/irq.c
+ * linux/arch/arm/mach-clps711x/core.c
*
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ * Core support for the CLPS711x-based machines.
+ *
+ * Copyright (C) 2001,2011 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/kernel.h>
+#include <linux/mm.h>
#include <linux/init.h>
-#include <linux/list.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/timex.h>
-#include <asm/mach/irq.h>
+#include <asm/sizes.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-
+#include <asm/leds.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
#include <asm/hardware/clps7111.h>
+/*
+ * This maps the generic CLPS711x registers
+ */
+static struct map_desc clps711x_io_desc[] __initdata = {
+ {
+ .virtual = CLPS7111_VIRT_BASE,
+ .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
+};
+
+void __init clps711x_map_io(void)
+{
+ iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
+}
+
static void int1_mask(struct irq_data *d)
{
u32 intmr1;
for (i = 0; i < NR_IRQS; i++) {
if (INT1_IRQS & (1 << i)) {
- irq_set_chip_and_handler(i, &int1_chip,
+ irq_set_chip_and_handler(i, &int1_chip,
handle_level_irq);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
if (INT2_IRQS & (1 << i)) {
irq_set_chip_and_handler(i, &int2_chip,
handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
- }
+ }
}
/*
clps_writel(0, SYNCIO);
clps_writel(0, KBDEOI);
}
+
+/*
+ * gettimeoffset() returns time since last timer tick, in usecs.
+ *
+ * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+ * 'tick' is usecs per jiffy.
+ */
+static unsigned long clps711x_gettimeoffset(void)
+{
+ unsigned long hwticks;
+ hwticks = LATCH - (clps_readl(TC2D) & 0xffff); /* since last underflow */
+ return (hwticks * (tick_nsec / 1000)) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id)
+{
+ timer_tick();
+ return IRQ_HANDLED;
+}
+
+static struct irqaction clps711x_timer_irq = {
+ .name = "CLPS711x Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = p720t_timer_interrupt,
+};
+
+static void __init clps711x_timer_init(void)
+{
+ struct timespec tv;
+ unsigned int syscon;
+
+ syscon = clps_readl(SYSCON1);
+ syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
+ clps_writel(syscon, SYSCON1);
+
+ clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
+
+ setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
+
+ tv.tv_nsec = 0;
+ tv.tv_sec = clps_readl(RTCDR);
+ do_settimeofday(&tv);
+}
+
+struct sys_timer clps711x_timer = {
+ .init = clps711x_timer_init,
+ .offset = clps711x_gettimeoffset,
+};
static inline void arch_reset(char mode, const char *cmd)
{
- cpu_reset(0);
+ soft_restart(0);
}
#endif
+++ /dev/null
-/*
- * arch/arm/mach-clps711x/include/mach/vmalloc.h
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xd0000000UL
+++ /dev/null
-/*
- * linux/arch/arm/mach-clps711x/mm.c
- *
- * Generic MM setup for the CLPS711x-based machines.
- *
- * Copyright (C) 2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/clps7111.h>
-
-/*
- * This maps the generic CLPS711x registers
- */
-static struct map_desc clps711x_io_desc[] __initdata = {
- {
- .virtual = CLPS7111_VIRT_BASE,
- .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE),
- .length = SZ_1M,
- .type = MT_DEVICE
- }
-};
-
-void __init clps711x_map_io(void)
-{
- iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-clps711x/time.c
- *
- * Copyright (C) 2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/timex.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/hardware/clps7111.h>
-
-#include <asm/mach/time.h>
-
-
-/*
- * gettimeoffset() returns time since last timer tick, in usecs.
- *
- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- * 'tick' is usecs per jiffy.
- */
-static unsigned long clps711x_gettimeoffset(void)
-{
- unsigned long hwticks;
- hwticks = LATCH - (clps_readl(TC2D) & 0xffff); /* since last underflow */
- return (hwticks * (tick_nsec / 1000)) / LATCH;
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-p720t_timer_interrupt(int irq, void *dev_id)
-{
- timer_tick();
- return IRQ_HANDLED;
-}
-
-static struct irqaction clps711x_timer_irq = {
- .name = "CLPS711x Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = p720t_timer_interrupt,
-};
-
-static void __init clps711x_timer_init(void)
-{
- struct timespec tv;
- unsigned int syscon;
-
- syscon = clps_readl(SYSCON1);
- syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
- clps_writel(syscon, SYSCON1);
-
- clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
-
- setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
-
- tv.tv_nsec = 0;
- tv.tv_sec = clps_readl(RTCDR);
- do_settimeofday(&tv);
-}
-
-struct sys_timer clps711x_timer = {
- .init = clps711x_timer_init,
- .offset = clps711x_gettimeoffset,
-};
#include <linux/mtd/partitions.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
.map_io = cns3420_map_io,
.init_irq = cns3xxx_init_irq,
.timer = &cns3xxx_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = cns3420_init,
MACHINE_END
* published by the Free Software Foundation.
*/
-#include <asm/hardware/entry-macro-gic.S>
-
.macro disable_fiq
.endm
+++ /dev/null
-/*
- * Copyright 2000 Russell King.
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#define VMALLOC_END 0xd8000000UL
#
# Common objects
-obj-y := time.o clock.o serial.o io.o psc.o \
+obj-y := time.o clock.o serial.o psc.o \
dma.o usb.o common.o sram.o aemif.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
#define __mem_pci(a) (a)
#define __mem_isa(a) (a)
-#ifndef __ASSEMBLER__
-#define __arch_ioremap davinci_ioremap
-#define __arch_iounmap davinci_iounmap
-
-void __iomem *davinci_ioremap(unsigned long phys, size_t size,
- unsigned int type);
-void davinci_iounmap(volatile void __iomem *addr);
-#endif
#endif /* __ASM_ARCH_IO_H */
+++ /dev/null
-/*
- * DaVinci vmalloc definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <mach/hardware.h>
-
-/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
-#define VMALLOC_END (IO_VIRT - (2<<20))
+++ /dev/null
-/*
- * DaVinci I/O mapping code
- *
- * Copyright (C) 2005-2006 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <asm/tlb.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-
-/*
- * Intercept ioremap() requests for addresses in our fixed mapping regions.
- */
-void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
-{
- struct map_desc *desc = davinci_soc_info.io_desc;
- int desc_num = davinci_soc_info.io_desc_num;
- int i;
-
- for (i = 0; i < desc_num; i++, desc++) {
- unsigned long iophys = __pfn_to_phys(desc->pfn);
- unsigned long iosize = desc->length;
-
- if (p >= iophys && (p + size) <= (iophys + iosize))
- return __io(desc->virtual + p - iophys);
- }
-
- return __arm_ioremap_caller(p, size, type,
- __builtin_return_address(0));
-}
-EXPORT_SYMBOL(davinci_ioremap);
-
-void davinci_iounmap(volatile void __iomem *addr)
-{
- unsigned long virt = (unsigned long)addr;
-
- if (virt >= VMALLOC_START && virt < VMALLOC_END)
- __iounmap(addr);
-}
-EXPORT_SYMBOL(davinci_iounmap);
#ifndef __ASM_ARCH_DOVE_H
#define __ASM_ARCH_DOVE_H
-#include <mach/vmalloc.h>
-
/*
* Marvell Dove address maps.
*
+++ /dev/null
-/*
- * arch/arm/mach-dove/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfd800000UL
.atag_offset = 0x400,
.reserve_lp0 = 1,
.reserve_lp2 = 1,
- .soft_reboot = 1,
+ .restart_mode = 's',
.map_io = ebsa110_map_io,
.init_irq = ebsa110_init_irq,
.timer = &ebsa110_timer,
asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
}
-#define arch_reset(mode, cmd) cpu_reset(0x80000000)
+#define arch_reset(mode, cmd) soft_restart(0x80000000)
#endif
+++ /dev/null
-/*
- * arch/arm/mach-ebsa110/include/mach/vmalloc.h
- *
- * Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END 0xdf000000UL
#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = adssphere_init_machine,
MACHINE_END
#include <mach/ep93xx_spi.h>
#include <mach/gpio-ep93xx.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
MACHINE_END
#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = gesbc9312_init_machine,
MACHINE_END
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
-#include <mach/ep93xx-regs.h>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =(EP93XX_AHB_VIRT_BASE)
- orr \base, \base, #0x000b0000
- mov \irqnr, #0
- ldr \irqstat, [\base] @ lower 32 interrupts
- cmp \irqstat, #0
- bne 1001f
-
- eor \base, \base, #0x00070000
- ldr \irqstat, [\base] @ upper 32 interrupts
- cmp \irqstat, #0
- beq 1002f
- mov \irqnr, #0x20
-
-1001:
- movs \tmp, \irqstat, lsl #16
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #16
-
- movs \tmp, \irqstat, lsl #8
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #8
-
- movs \tmp, \irqstat, lsl #4
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #4
-
- movs \tmp, \irqstat, lsl #2
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #2
-
- movs \tmp, \irqstat, lsl #1
- addeq \irqnr, \irqnr, #1
- orrs \base, \base, #1
-
-1002:
- .endm
static inline void arch_reset(char mode, const char *cmd)
{
- local_irq_disable();
-
/*
* Set then clear the SWRST bit to initiate a software reset
*/
+++ /dev/null
-/*
- * arch/arm/mach-ep93xx/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe800000UL
#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
MACHINE_END
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
MACHINE_END
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
MACHINE_END
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
MACHINE_END
#include <mach/fb.h>
#include <mach/gpio-ep93xx.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = simone_init_machine,
MACHINE_END
#include <mach/fb.h>
#include <mach/gpio-ep93xx.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
.atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = snappercl15_init_machine,
MACHINE_END
#include <mach/hardware.h>
#include <mach/ts72xx.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
.atag_offset = 0x100,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = ts72xx_init_machine,
MACHINE_END
#include <asm/mach/irq.h>
#include <asm/proc-fns.h>
+#include <asm/exception.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
-unsigned int gic_bank_offset __read_mostly;
-
extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start);
extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
exynos4_setup_clocks();
}
-static void exynos4_gic_irq_fix_base(struct irq_data *d)
-{
- struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-
- gic_data->cpu_base = S5P_VA_GIC_CPU +
- (gic_bank_offset * smp_processor_id());
-
- gic_data->dist_base = S5P_VA_GIC_DIST +
- (gic_bank_offset * smp_processor_id());
-}
-
void __init exynos4_init_irq(void)
{
int irq;
+ unsigned int gic_bank_offset;
gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
- gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
- gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
- gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
- gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
+ gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset);
for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/hardware/gic.h>
-
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- mov \tmp, #0
-
- mrc p15, 0, \base, c0, c0, 5
- and \base, \base, #3
- cmp \base, #0
- beq 1f
-
- ldr \tmp, =gic_bank_offset
- ldr \tmp, [\tmp]
- cmp \base, #1
- beq 1f
-
- cmp \base, #2
- addeq \tmp, \tmp, \tmp
- addne \tmp, \tmp, \tmp, LSL #1
-
-1: ldr \base, =gic_cpu_base_addr
- ldr \base, [\base]
- add \base, \base, \tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Interrupts 0-15 are IPI
- * 16-28 are reserved
- * 29-31 are local. We allow 30 to be used for the watchdog.
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * For now, we ignore all local interrupts so only return an interrupt if it's
- * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
- *
- * A simple read from the controller will tell us the number of the highest
- * priority enabled interrupt. We then just need to check whether it is in the
- * valid range for an IRQ (30-1020 inclusive).
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
- ldr \tmp, =1021
-
- bic \irqnr, \irqstat, #0x1c00
-
- cmp \irqnr, #15
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
- addne \irqnr, \irqnr, #32
-
- .endm
-
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
+++ /dev/null
-/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EXYNOS4 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H __FILE__
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
#include <linux/smsc911x.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <plat/cpu.h>
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = armlex4210_machine_init,
.timer = &exynos4_timer,
MACHINE_END
#include <media/v4l2-mediabus.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <plat/adc.h>
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = nuri_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = nuri_machine_init,
.timer = &exynos4_timer,
.reserve = &nuri_reserve,
#include <linux/lcd.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <video/platform_lcd.h>
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = origen_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = origen_machine_init,
.timer = &exynos4_timer,
.reserve = &origen_reserve,
#include <linux/serial_core.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <plat/backlight.h>
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = smdk4x12_machine_init,
.timer = &exynos4_timer,
MACHINE_END
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = smdk4x12_machine_init,
.timer = &exynos4_timer,
MACHINE_END
#include <linux/pwm_backlight.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <video/platform_lcd.h>
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = smdkv310_machine_init,
.timer = &exynos4_timer,
.reserve = &smdkv310_reserve,
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = smdkv310_machine_init,
.timer = &exynos4_timer,
MACHINE_END
#include <linux/i2c/atmel_mxt_ts.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = universal_machine_init,
.timer = &exynos4_timer,
.reserve = &universal_reserve,
#include <plat/cpu.h>
-extern unsigned int gic_bank_offset;
extern void exynos4_secondary_startup(void);
#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
static DEFINE_SPINLOCK(boot_lock);
-static void __cpuinit exynos4_gic_secondary_init(void)
-{
- void __iomem *dist_base = S5P_VA_GIC_DIST +
- (gic_bank_offset * smp_processor_id());
- void __iomem *cpu_base = S5P_VA_GIC_CPU +
- (gic_bank_offset * smp_processor_id());
- int i;
-
- /*
- * Deal with the banked PPI and SGI interrupts - disable all
- * PPI interrupts, ensure all SGI interrupts are enabled.
- */
- __raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
- __raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
-
- /*
- * Set priority on PPI and SGI interrupts
- */
- for (i = 0; i < 32; i += 4)
- __raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
-
- __raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
- __raw_writel(1, cpu_base + GIC_CPU_CTRL);
-}
-
void __cpuinit platform_secondary_init(unsigned int cpu)
{
/*
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
- exynos4_gic_secondary_init();
+ gic_secondary_init(0);
/*
* let the primary processor know we're out of the
MACHINE_START(CATS, "Chalice-CATS")
/* Maintainer: Philip Blundell */
.atag_offset = 0x100,
- .soft_reboot = 1,
+ .restart_mode = 's',
.fixup = fixup_cats,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
/*
* Jump into the ROM
*/
- cpu_reset(0x41000000);
+ soft_restart(0x41000000);
} else {
if (machine_is_netwinder()) {
/* open up the SuperIO chip
+++ /dev/null
-/*
- * arch/arm/mach-footbridge/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#define VMALLOC_END 0xf0000000UL
+++ /dev/null
-/*
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#define VMALLOC_END 0xf0000000UL
+++ /dev/null
-/*
- * arch/arm/mach-h720x/include/mach/vmalloc.h
- */
-
-#ifndef __ARCH_ARM_VMALLOC_H
-#define __ARCH_ARM_VMALLOC_H
-
-#define VMALLOC_END 0xd0000000UL
-
-#endif
.map_io = highbank_map_io,
.init_irq = highbank_init_irq,
.timer = &highbank_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = highbank_init,
.dt_compat = highbank_match,
MACHINE_END
-#include <asm/hardware/entry-macro-gic.S>
-
.macro disable_fiq
.endm
+++ /dev/null
-#define VMALLOC_END 0xFEE00000UL
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
+
+dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
+ imx6q-sabrelite.dtb
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/micrel_phy.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/hardware.h>
+/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
+static int ksz9021rn_phy_fixup(struct phy_device *phydev)
+{
+ /* min rx data delay */
+ phy_write(phydev, 0x0b, 0x8105);
+ phy_write(phydev, 0x0c, 0x0000);
+
+ /* max rx/tx clock delay, min rx/tx control delay */
+ phy_write(phydev, 0x0b, 0x8104);
+ phy_write(phydev, 0x0c, 0xf0f0);
+ phy_write(phydev, 0x0b, 0x104);
+
+ return 0;
+}
+
static void __init imx6q_init_machine(void)
{
+ if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
+ phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+ ksz9021rn_phy_fixup);
+
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
imx6q_pm_init();
};
static const char *imx6q_dt_compat[] __initdata = {
- "fsl,imx6q-sabreauto",
+ "fsl,imx6q-arm2",
+ "fsl,imx6q-sabrelite",
NULL,
};
+++ /dev/null
-/*
- * arch/arm/mach-integrator/include/mach/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xd0000000UL
+++ /dev/null
-#ifndef _VMALLOC_H_
-#define _VMALLOC_H_
-#define VMALLOC_END 0xfa000000UL
-#endif
#include <asm/hardware/iop3xx.h>
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
- unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
#define IO_SPACE_LIMIT 0xffffffff
#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
#define __mem_pci(a) (a)
-#define __arch_ioremap __iop3xx_ioremap
-#define __arch_iounmap __iop3xx_iounmap
-
#endif
static inline void arch_reset(char mode, const char *cmd)
{
- local_irq_disable();
-
if (machine_is_n2100()) {
gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
*IOP3XX_PCSR = 0x30;
/* Jump into ROM at address 0 */
- cpu_reset(0);
+ soft_restart(0);
}
+++ /dev/null
-/*
- * arch/arm/mach-iop32x/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe000000UL
#include <asm/hardware/iop3xx.h>
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
- unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
#define IO_SPACE_LIMIT 0xffffffff
#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
#define __mem_pci(a) (a)
-#define __arch_ioremap __iop3xx_ioremap
-#define __arch_iounmap __iop3xx_iounmap
-
#endif
*IOP3XX_PCSR = 0x30;
/* Jump into ROM at address 0 */
- cpu_reset(0);
+ soft_restart(0);
}
+++ /dev/null
-/*
- * arch/arm/mach-iop33x/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe000000UL
static inline void arch_reset(char mode, const char *cmd)
{
- local_irq_disable();
-
/*
* Reset flash banking register so that we are pointing at
* RedBoot bank.
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/vmalloc.h
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright 2002 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts. That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END 0xfb000000UL
#define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
#define __mem_pci(a) (a)
-static inline void __iomem *
-ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
-{
- if (addr >= IXP23XX_PCI_MEM_START &&
- addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
- if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
- return NULL;
-
- return (void __iomem *)
- ((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
- }
-
- return __arm_ioremap(addr, size, mtype);
-}
-
-static inline void
-ixp23xx_iounmap(void __iomem *addr)
-{
- if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
- (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
- return;
-
- __iounmap(addr);
-}
-
-#define __arch_ioremap ixp23xx_ioremap
-#define __arch_iounmap ixp23xx_iounmap
-
-
#endif
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/include/mach/vmalloc.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * NPU mappings end at 0xf0000000 and we allocate 64MB for board
- * specific static I/O.
- */
-
-#define VMALLOC_END (0xec000000UL)
{
if ( 1 && mode == 's') {
/* Jump into ROM at address 0 */
- cpu_reset(0);
+ soft_restart(0);
} else {
/* Use on-chip reset capability */
+++ /dev/null
-/*
- * arch/arm/mach-ixp4xx/include/mach/vmalloc.h
- */
-#define VMALLOC_END (0xff000000UL)
-
+ KIRKWOOD_PCIE_IO_VIRT_BASE);
}
-static inline void __iomem *
-__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
-{
- void __iomem *retval;
- unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE;
- if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE &&
- size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) {
- retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs;
- } else {
- retval = __arm_ioremap(paddr, size, mtype);
- }
-
- return retval;
-}
-
-static inline void
-__arch_iounmap(void __iomem *addr)
-{
- if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE ||
- addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE))
- __iounmap(addr);
-}
-
-#define __arch_ioremap __arch_ioremap
-#define __arch_iounmap __arch_iounmap
#define __io(a) __io(a)
#define __mem_pci(a) (a)
+++ /dev/null
-/*
- * arch/arm/mach-kirkwood/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe800000UL
unsigned int reg;
if (mode == 's')
- cpu_reset(0);
+ soft_restart(0);
/* disable timer0 */
reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+++ /dev/null
-/*
- * arch/arm/mach-ks8695/include/mach/vmalloc.h
- *
- * Copyright (C) 2006 Ben Dooks
- * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
- *
- * KS8695 vmalloc definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END (KS8695_IO_VA & PGDIR_MASK)
-
-#endif
case 'h':
printk(KERN_CRIT "RESET: Rebooting system\n");
- /* Disable interrupts */
- local_irq_disable();
-
lpc32xx_watchdog_reset();
break;
+++ /dev/null
-/*
- * arch/arm/mach-lpc32xx/include/mach/vmalloc.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xF0000000UL
-
-#endif
static inline void arch_reset(char mode, const char *cmd)
{
if (cpu_is_pxa168())
- cpu_reset(0xffff0000);
+ soft_restart(0xffff0000);
else
- cpu_reset(0);
+ soft_restart(0);
}
#endif /* __ASM_MACH_SYSTEM_H */
+++ /dev/null
-/*
- * linux/arch/arm/mach-mmp/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe000000UL
.map_io = msm8960_map_io,
.init_irq = msm8960_init_irq,
.timer = &msm_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = msm8960_sim_init,
MACHINE_END
.map_io = msm8960_map_io,
.init_irq = msm8960_init_irq,
.timer = &msm_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = msm8960_rumi3_init,
MACHINE_END
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = msm8x60_init,
.timer = &msm_timer,
MACHINE_END
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = msm8x60_init,
.timer = &msm_timer,
MACHINE_END
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = msm8x60_init,
.timer = &msm_timer,
MACHINE_END
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = msm8x60_init,
.timer = &msm_timer,
MACHINE_END
+++ /dev/null
-/*
- * Low-level IRQ helper macros
- *
- * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/entry-macro-gic.S>
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
+++ /dev/null
-/*
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <mach/msm_iomap.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- @ enable imprecise aborts
- cpsie a
- mov \base, #MSM_VIC_BASE
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- @ 0xD0 has irq# or old irq# if the irq has been handled
- @ 0xD4 has irq# or -1 if none pending *but* if you just
- @ read 0xD4 you never get the first irq for some reason
- ldr \irqnr, [\base, #0xD0]
- ldr \irqnr, [\base, #0xD4]
- cmp \irqnr, #0xffffffff
- .endm
*
*/
-#if defined(CONFIG_ARM_GIC)
-#include <mach/entry-macro-qgic.S>
-#else
-#include <mach/entry-macro-vic.S>
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+#if !defined(CONFIG_ARM_GIC)
+#include <mach/msm_iomap.h>
+
+ .macro get_irqnr_preamble, base, tmp
+ @ enable imprecise aborts
+ cpsie a
+ mov \base, #MSM_VIC_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ 0xD0 has irq# or old irq# if the irq has been handled
+ @ 0xD4 has irq# or -1 if none pending *but* if you just
+ @ read 0xD4 you never get the first irq for some reason
+ ldr \irqnr, [\base, #0xD0]
+ ldr \irqnr, [\base, #0xD4]
+ cmp \irqnr, #0xffffffff
+ .endm
#endif
+++ /dev/null
-/* arch/arm/mach-msm/include/mach/vmalloc.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_VMALLOC_H
-#define __ASM_ARCH_MSM_VMALLOC_H
-
-#define VMALLOC_END 0xd0000000UL
-
-#endif
-
+++ /dev/null
-/*
- * arch/arm/mach-mv78xx0/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe000000UL
+++ /dev/null
-/*
- * Copyright (C) 2000 Russell King.
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MXS_VMALLOC_H__
-#define __MACH_MXS_VMALLOC_H__
-
-/* vmalloc ending address */
-#define VMALLOC_END 0xf4000000UL
-
-#endif /* __MACH_MXS_VMALLOC_H__ */
mdelay(50);
/* We'll take a jump through zero as a poor second */
- cpu_reset(0);
+ soft_restart(0);
}
static int __init mxs_arch_reset_init(void)
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <mach/hardware.h>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =io_p2v(0x001ff000)
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #0]
- clz \irqnr, \irqstat
- rsb \irqnr, \irqnr, #31
- cmp \irqstat, #0
- .endm
-
+++ /dev/null
-/*
- * arch/arm/mach-netx/include/mach/vmalloc.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xd0000000UL
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
#include <mach/eth.h>
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &netx_timer,
.init_machine = nxdb500_init,
MACHINE_END
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
#include <mach/eth.h>
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &netx_timer,
.init_machine = nxdkn_init,
MACHINE_END
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
#include <mach/netx-regs.h>
#include <mach/eth.h>
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &netx_timer,
.init_machine = nxeb500hmi_init,
MACHINE_END
#include <linux/mtd/onenand.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
+#include <asm/hardware/vic.h>
#include <asm/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
.atag_offset = 0x100,
.map_io = cpu8815_map_io,
.init_irq = cpu8815_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &nomadik_timer,
.init_machine = nhk8815_platform_init,
MACHINE_END
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IO_ADDRESS(NOMADIK_IC_BASE)
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- /* This stanza gets the irq mask from one of two status registers */
- mov \irqnr, #0
- ldr \irqstat, [\base, #VIC_REG_IRQSR0] @ get masked status
- cmp \irqstat, #0
- bne 1001f
- add \irqnr, \irqnr, #32
- ldr \irqstat, [\base, #VIC_REG_IRQSR1] @ get masked status
-
-1001: tst \irqstat, #15
- bne 1002f
- add \irqnr, \irqnr, #4
- movs \irqstat, \irqstat, lsr #4
- bne 1001b
-1002: tst \irqstat, #1
- bne 1003f
- add \irqnr, \irqnr, #1
- movs \irqstat, \irqstat, lsr #1
- bne 1002b
-1003: /* EQ will be set if no irqs pending */
- .endm
+++ /dev/null
-
-#define VMALLOC_END 0xe8000000UL
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <mach/camera.h>
#include <mach/ams-delta-fiq.h>
#include <plat/flash.h>
#include <plat/fpga.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
/* fsample is pretty close to p2-sample */
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
/* assume no Mini-AB port */
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/flash.h>
#include "board-h2.h"
#include <plat/usb.h>
#include <plat/keypad.h>
#include <plat/dma.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/flash.h>
#include "board-h3.h"
#include <asm/mach/arch.h>
#include <plat/omap7xx.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/usb.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/mmc.h>
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/hwa742.h>
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>
#include <plat/usb.h>
#include <plat/mux.h>
#include <plat/tc.h>
-#include <plat/common.h>
+#include "common.h"
/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
#define OMAP_OSK_ETHR_START 0x04800300
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#define PALMTE_USBDETECT_GPIO 0
#define PALMTE_USB_OR_DC_GPIO 1
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <plat/fpga.h>
#include <plat/flash.h>
#include <plat/keypad.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
static const unsigned int p2_keymap[] = {
#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/keypad.h>
#include <plat/board-sx1.h>
#include <asm/mach/map.h>
#include <plat/board-voiceblue.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
--- /dev/null
+/*
+ *
+ * Header for code common to all OMAP1 machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
+#define __ARCH_ARM_MACH_OMAP1_COMMON_H
+
+#include <plat/common.h>
+
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+void omap7xx_map_io(void);
+#else
+static inline void omap7xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+void omap15xx_map_io(void);
+#else
+static inline void omap15xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+void omap16xx_map_io(void);
+#else
+static inline void omap16xx_map_io(void)
+{
+}
+#endif
+
+void omap1_init_early(void);
+void omap1_init_irq(void);
+
+extern struct sys_timer omap1_timer;
+extern bool omap_32k_timer_init(void);
+
+#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
#include <mach/hardware.h>
#include <asm/mach/map.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
+++ /dev/null
-/*
- * arch/arm/mach-omap1/include/mach/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xd8000000UL
void omap1_init_early(void)
{
omap_check_revision();
- omap_ioremap_init();
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <plat/common.h>
+#include "common.h"
#ifdef CONFIG_OMAP_MPU_TIMER
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/dmtimer.h>
/*
depends on ARCH_OMAP2PLUS
default y
select CPU_V6
+ select MULTI_IRQ_HANDLER
config ARCH_OMAP3
bool "TI OMAP3"
select ARCH_HAS_OPP
select PM_OPP if PM
select ARM_CPU_SUSPEND if PM
+ select MULTI_IRQ_HANDLER
config ARCH_OMAP4
bool "TI OMAP4"
default y
select ARCH_OMAP_OTG
-config SOC_OMAPTI816X
- bool "TI816X support"
+config SOC_OMAPTI81XX
+ bool "TI81XX support"
+ depends on ARCH_OMAP3
+ default y
+
+config SOC_OMAPAM33XX
+ bool "AM33XX support"
depends on ARCH_OMAP3
default y
config MACH_TI8168EVM
bool "TI8168 Evaluation Module"
- depends on SOC_OMAPTI816X
+ depends on SOC_OMAPTI81XX
+ default y
+
+config MACH_TI8148EVM
+ bool "TI8148 Evaluation Module"
+ depends on SOC_OMAPTI81XX
default y
config MACH_OMAP_4430SDP
obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o
obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
+obj-$(CONFIG_MACH_TI8148EVM) += board-ti8168evm.o
# Platform specific device init code
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat/gpmc-smc91x.h>
.map_io = omap243x_map_io,
.init_early = omap2430_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_2430sdp_init,
.timer = &omap2_timer,
MACHINE_END
#include <plat/mcspi.h>
#include <plat/board.h>
#include <plat/usb.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <video/omapdss.h>
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_3430sdp_init,
.timer = &omap3_timer,
MACHINE_END
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/gpmc-smc91x.h>
#include <plat/usb.h>
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_sdp_init,
.timer = &omap3_timer,
MACHINE_END
#include <linux/leds_pwm.h>
#include <mach/hardware.h>
-#include <mach/omap4-common.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
#include <plat/omap4-keypad.h>
},
};
+static struct platform_device sdp4430_dmic_codec = {
+ .name = "dmic-codec",
+ .id = -1,
+};
+
static struct platform_device *sdp4430_devices[] __initdata = {
&sdp4430_gpio_keys_device,
&sdp4430_leds_gpio,
&sdp4430_leds_pwm,
&sdp4430_vbat,
+ &sdp4430_dmic_codec,
};
static struct omap_musb_board_data musb_board_data = {
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = gic_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap4_timer,
MACHINE_END
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include "mux.h"
.map_io = omap3_map_io,
.init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = am3517_crane_init,
.timer = &omap3_timer,
MACHINE_END
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
.map_io = omap3_map_io,
.init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = am3517_evm_init,
.timer = &omap3_timer,
MACHINE_END
#include <plat/led.h>
#include <plat/usb.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <video/omapdss.h>
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_apollon_init,
.timer = &omap2_timer,
MACHINE_END
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/nand.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
#include "hsmmc.h"
#include "common-board-devices.h"
-#define CM_T35_GPIO_PENDOWN 57
+#define CM_T35_GPIO_PENDOWN 57
+#define SB_T35_USB_HUB_RESET_GPIO 167
#define CM_T35_SMSC911X_CS 5
#define CM_T35_SMSC911X_GPIO 163
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
-static struct regulator_consumer_supply cm_t35_vdvi_supply[] = {
- REGULATOR_SUPPLY("vdvi", "omapdss"),
+static struct regulator_consumer_supply cm_t35_vio_supplies[] = {
+ REGULATOR_SUPPLY("vcc", "spi1.0"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
.consumer_supplies = cm_t35_vsim_supply,
};
+static struct regulator_init_data cm_t35_vio = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(cm_t35_vio_supplies),
+ .consumer_supplies = cm_t35_vio_supplies,
+};
+
static uint32_t cm_t35_keymap[] = {
KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT),
KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN),
.reset_gpio_port[2] = -EINVAL
};
+static void cm_t35_init_usbh(void)
+{
+ int err;
+
+ err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO,
+ GPIOF_OUT_INIT_LOW, "usb hub rst");
+ if (err) {
+ pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err);
+ } else {
+ udelay(10);
+ gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1);
+ msleep(1);
+ }
+
+ usbhs_init(&usbhs_bdata);
+}
+
static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
unsigned ngpio)
{
.gpio = &cm_t35_gpio_data,
.vmmc1 = &cm_t35_vmmc1,
.vsim = &cm_t35_vsim,
+ .vio = &cm_t35_vio,
};
static void __init cm_t35_init_i2c(void)
{
omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
- TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
- cm_t35_twldata.vpll2->constraints.name = "VDVI";
- cm_t35_twldata.vpll2->num_consumer_supplies =
- ARRAY_SIZE(cm_t35_vdvi_supply);
- cm_t35_twldata.vpll2->consumer_supplies = cm_t35_vdvi_supply;
+ TWL_COMMON_REGULATOR_VDAC |
+ TWL_COMMON_PDATA_AUDIO);
omap3_pmic_init("tps65930", &cm_t35_twldata);
}
static void __init cm_t35_init_mux(void)
{
- omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
- omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
- omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
- omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
- omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
- omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
- cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT;
+
+ omap_mux_init_signal("dss_data0.dss_data0", mux_mode);
+ omap_mux_init_signal("dss_data1.dss_data1", mux_mode);
+ omap_mux_init_signal("dss_data2.dss_data2", mux_mode);
+ omap_mux_init_signal("dss_data3.dss_data3", mux_mode);
+ omap_mux_init_signal("dss_data4.dss_data4", mux_mode);
+ omap_mux_init_signal("dss_data5.dss_data5", mux_mode);
+ cm_t3x_common_dss_mux_init(mux_mode);
}
static void __init cm_t3730_init_mux(void)
{
- omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
- cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ int mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT;
+
+ omap_mux_init_signal("sys_boot0", mux_mode);
+ omap_mux_init_signal("sys_boot1", mux_mode);
+ omap_mux_init_signal("sys_boot3", mux_mode);
+ omap_mux_init_signal("sys_boot4", mux_mode);
+ omap_mux_init_signal("sys_boot5", mux_mode);
+ omap_mux_init_signal("sys_boot6", mux_mode);
+ cm_t3x_common_dss_mux_init(mux_mode);
}
#else
static inline void cm_t35_init_mux(void) {}
cm_t35_init_display();
usb_musb_init(NULL);
- usbhs_init(&usbhs_bdata);
+ cm_t35_init_usbh();
}
static void __init cm_t35_init(void)
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t35_init,
.timer = &omap3_timer,
MACHINE_END
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3730_init,
.timer = &omap3_timer,
MACHINE_END
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <plat/nand.h>
#include <plat/gpmc.h>
.map_io = omap3_map_io,
.init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3517_init,
.timer = &omap3_timer,
MACHINE_END
#include <asm/mach/flash.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = devkit8000_init,
.timer = &omap3_secure_timer,
MACHINE_END
#include <asm/mach/arch.h>
#include <plat/board.h>
-#include <plat/common.h>
-#include <mach/omap4-common.h>
+#include "common.h"
#include "common-board-devices.h"
/*
.map_io = omap243x_map_io,
.init_early = omap2430_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap243x_boards_compat,
#include <plat/usb.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/menelaus.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_h4_init,
.timer = &omap2_timer,
MACHINE_END
#include <asm/mach/arch.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <video/omapdss.h>
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
MACHINE_END
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
MACHINE_END
#include <plat/mcspi.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <mach/board-zoom.h>
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_ldp_init,
.timer = &omap3_timer,
MACHINE_END
#include <asm/mach-types.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/menelaus.h>
#include <mach/irqs.h>
#include <plat/mcspi.h>
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
MACHINE_END
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
MACHINE_END
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
MACHINE_END
#include <asm/mach/flash.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-dvi.h>
#include <plat/gpmc.h>
.map_io = omap3_map_io,
.init_early = omap3_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_beagle_init,
.timer = &omap3_secure_timer,
MACHINE_END
#include <plat/board.h>
#include <plat/usb.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/mcspi.h>
#include <video/omapdss.h>
#include <video/omap-panel-dvi.h>
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_evm_init,
.timer = &omap3_timer,
MACHINE_END
#include <plat/mux.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc-smsc911x.h>
#include <plat/gpmc.h>
#include <plat/sdrc.h>
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
MACHINE_END
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
MACHINE_END
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3pandora_init,
.timer = &omap3_timer,
MACHINE_END
#include <asm/mach/flash.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_stalker_init,
.timer = &omap3_secure_timer,
MACHINE_END
#include <asm/mach/flash.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_touchbook_init,
.timer = &omap3_secure_timer,
MACHINE_END
#include <linux/wl12xx.h>
#include <mach/hardware.h>
-#include <mach/omap4-common.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <video/omapdss.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-dvi.h>
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = gic_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = omap4_panda_init,
.timer = &omap4_timer,
MACHINE_END
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = overo_init,
.timer = &omap3_timer,
MACHINE_END
#include <plat/mmc.h>
#include <plat/usb.h>
#include <plat/gpmc.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/onenand.h>
#include "mux.h"
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = rm680_init,
.timer = &omap3_timer,
MACHINE_END
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/wl12xx.h>
+#include <linux/spi/tsc2005.h>
#include <linux/i2c.h>
#include <linux/i2c/twl.h>
#include <linux/clk.h>
#include <plat/mcspi.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/onenand.h>
#define RX51_USB_TRANSCEIVER_RST_GPIO 67
+#define RX51_TSC2005_RESET_GPIO 104
+#define RX51_TSC2005_IRQ_GPIO 100
+
/* list all spi devices here */
enum {
RX51_SPI_WL1251,
};
static struct wl12xx_platform_data wl1251_pdata;
+static struct tsc2005_platform_data tsc2005_pdata;
#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
.modalias = "tsc2005",
.bus_num = 1,
.chip_select = 0,
- /* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/
+ .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),
.max_speed_hz = 6000000,
.controller_data = &tsc2005_mcspi_config,
- /* .platform_data = &tsc2005_config,*/
+ .platform_data = &tsc2005_pdata,
},
};
*/
}
+static struct tsc2005_platform_data tsc2005_pdata = {
+ .ts_pressure_max = 2048,
+ .ts_pressure_fudge = 2,
+ .ts_x_max = 4096,
+ .ts_x_fudge = 4,
+ .ts_y_max = 4096,
+ .ts_y_fudge = 7,
+ .ts_x_plate_ohm = 280,
+ .esd_timeout_ms = 8000,
+};
+
+static void rx51_tsc2005_set_reset(bool enable)
+{
+ gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
+}
+
+static void __init rx51_init_tsc2005(void)
+{
+ int r;
+
+ r = gpio_request_one(RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ");
+ if (r < 0) {
+ printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 IRQ");
+ rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = 0;
+ }
+
+ r = gpio_request_one(RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH,
+ "tsc2005 reset");
+ if (r >= 0) {
+ tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
+ } else {
+ printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset");
+ tsc2005_pdata.esd_timeout_ms = 0;
+ }
+}
+
void __init rx51_peripherals_init(void)
{
rx51_i2c_init();
board_smc91x_init();
rx51_add_gpio_keys();
rx51_init_wl1251();
+ rx51_init_tsc2005();
rx51_init_si4713();
spi_register_board_info(rx51_peripherals_spi_board_info,
ARRAY_SIZE(rx51_peripherals_spi_board_info));
#include <plat/mcspi.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = rx51_init,
.timer = &omap3_timer,
MACHINE_END
/*
- * Code for TI8168 EVM.
+ * Code for TI8168/TI8148 EVM.
*
* Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
*
#include <plat/irqs.h>
#include <plat/board.h>
-#include <plat/common.h>
+#include "common.h"
+#include <plat/usb.h>
-static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
+static struct omap_musb_board_data musb_board_data = {
+ .set_phy_power = ti81xx_musb_phy_power,
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 500,
};
-static void __init ti8168_evm_init(void)
+static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = {
+};
+
+static void __init ti81xx_evm_init(void)
{
omap_serial_init();
omap_sdrc_init(NULL, NULL);
- omap_board_config = ti8168_evm_config;
- omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
-}
-
-static void __init ti8168_evm_map_io(void)
-{
- omapti816x_map_common_io();
+ omap_board_config = ti81xx_evm_config;
+ omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config);
+ usb_musb_init(&musb_board_data);
}
MACHINE_START(TI8168EVM, "ti8168evm")
/* Maintainer: Texas Instruments */
.atag_offset = 0x100,
- .map_io = ti8168_evm_map_io,
- .init_early = ti816x_init_early,
- .init_irq = ti816x_init_irq,
+ .map_io = ti81xx_map_io,
+ .init_early = ti81xx_init_early,
+ .init_irq = ti81xx_init_irq,
+ .timer = &omap3_timer,
+ .init_machine = ti81xx_evm_init,
+MACHINE_END
+
+MACHINE_START(TI8148EVM, "ti8148evm")
+ /* Maintainer: Texas Instruments */
+ .atag_offset = 0x100,
+ .map_io = ti81xx_map_io,
+ .init_early = ti81xx_init_early,
+ .init_irq = ti81xx_init_irq,
.timer = &omap3_timer,
- .init_machine = ti8168_evm_init,
+ .init_machine = ti81xx_evm_init,
MACHINE_END
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/usb.h>
#include <mach/board-zoom.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/usb.h>
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
MACHINE_END
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
MACHINE_END
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
-u8 cpu_mask;
+u16 cpu_mask;
/*
* clkdm_control: if true, then when a clock is enabled in the
const char *core_ck_name,
const char *mpu_ck_name);
-extern u8 cpu_mask;
+extern u16 cpu_mask;
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_dummy;
} else if (cpu_is_ti816x()) {
cpu_mask = RATE_IN_TI816X;
cpu_clkflg = CK_TI816X;
+ } else if (cpu_is_am33xx()) {
+ cpu_mask = RATE_IN_AM33XX;
+ } else if (cpu_is_ti814x()) {
+ cpu_mask = RATE_IN_TI814X;
} else if (cpu_is_omap34xx()) {
if (omap_rev() == OMAP3430_REV_ES1_0) {
cpu_mask = RATE_IN_3430ES1;
* Lock DPLL5 -- here only until other device init code can
* handle this
*/
- if (!cpu_is_ti816x() && (omap_rev() >= OMAP3430_REV_ES2_0))
+ if (!cpu_is_ti81xx() && (omap_rev() >= OMAP3430_REV_ES2_0))
omap3_clk_lock_dpll5();
/* Avoid sleeping during omap3_core_dpll_m2_set_rate() */
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "cm.h"
#include "cm1_44xx.h"
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "cm.h"
#include "cm1_44xx.h"
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/mux.h>
/*
* Adjust TAP register base such that omap3_check_revision accesses the correct
- * TI816X register for checking device ID (it adds 0x204 to tap base while
- * TI816X DEVICE ID register is at offset 0x600 from control base).
+ * TI81XX register for checking device ID (it adds 0x204 to tap base while
+ * TI81XX DEVICE ID register is at offset 0x600 from control base).
*/
-#define TI816X_TAP_BASE (TI816X_CTRL_BASE + \
- TI816X_CONTROL_DEVICE_ID - 0x204)
+#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \
+ TI81XX_CONTROL_DEVICE_ID - 0x204)
-static struct omap_globals ti816x_globals = {
+static struct omap_globals ti81xx_globals = {
.class = OMAP343X_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(TI816X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
+ .tap = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE),
+ .ctrl = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
};
-void __init omap2_set_globals_ti816x(void)
+void __init omap2_set_globals_ti81xx(void)
{
- __omap2_set_globals(&ti816x_globals);
+ __omap2_set_globals(&ti81xx_globals);
+}
+
+void __init ti81xx_map_io(void)
+{
+ omapti81xx_map_common_io();
+}
+
+#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \
+ TI81XX_CONTROL_DEVICE_ID - 0x204)
+
+static struct omap_globals am33xx_globals = {
+ .class = AM335X_CLASS,
+ .tap = AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE),
+ .ctrl = AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
+ .prm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
+ .cm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
+};
+
+void __init omap2_set_globals_am33xx(void)
+{
+ __omap2_set_globals(&am33xx_globals);
+}
+
+void __init am33xx_map_io(void)
+{
+ omapam33xx_map_common_io();
}
#endif
--- /dev/null
+/*
+ * Header for code common to all OMAP2+ machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
+#define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
+
+#include <linux/delay.h>
+#include <plat/common.h>
+
+#ifdef CONFIG_SOC_OMAP2420
+extern void omap242x_map_common_io(void);
+#else
+static inline void omap242x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP2430
+extern void omap243x_map_common_io(void);
+#else
+static inline void omap243x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+extern void omap34xx_map_common_io(void);
+#else
+static inline void omap34xx_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAPTI81XX
+extern void omapti81xx_map_common_io(void);
+#else
+static inline void omapti81xx_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAPAM33XX
+extern void omapam33xx_map_common_io(void);
+#else
+static inline void omapam33xx_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+extern void omap44xx_map_common_io(void);
+#else
+static inline void omap44xx_map_common_io(void)
+{
+}
+#endif
+
+extern void omap2_init_common_infrastructure(void);
+
+extern struct sys_timer omap2_timer;
+extern struct sys_timer omap3_timer;
+extern struct sys_timer omap3_secure_timer;
+extern struct sys_timer omap4_timer;
+
+void omap2420_init_early(void);
+void omap2430_init_early(void);
+void omap3430_init_early(void);
+void omap35xx_init_early(void);
+void omap3630_init_early(void);
+void omap3_init_early(void); /* Do not use this one */
+void am35xx_init_early(void);
+void ti81xx_init_early(void);
+void omap4430_init_early(void);
+
+/*
+ * IO bases for various OMAP processors
+ * Except the tap base, rest all the io bases
+ * listed are physical addresses.
+ */
+struct omap_globals {
+ u32 class; /* OMAP class to detect */
+ void __iomem *tap; /* Control module ID code */
+ void __iomem *sdrc; /* SDRAM Controller */
+ void __iomem *sms; /* SDRAM Memory Scheduler */
+ void __iomem *ctrl; /* System Control Module */
+ void __iomem *ctrl_pad; /* PAD Control Module */
+ void __iomem *prm; /* Power and Reset Management */
+ void __iomem *cm; /* Clock Management */
+ void __iomem *cm2;
+};
+
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_3xxx(void);
+void omap2_set_globals_443x(void);
+void omap2_set_globals_ti81xx(void);
+void omap2_set_globals_am33xx(void);
+
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_tap(struct omap_globals *);
+void omap2_set_globals_sdrc(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
+void omap242x_map_io(void);
+void omap243x_map_io(void);
+void omap3_map_io(void);
+void am33xx_map_io(void);
+void omap4_map_io(void);
+void ti81xx_map_io(void);
+
+/**
+ * omap_test_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed. To use, define some integer @index in the
+ * calling code. After running, if @index == @timeout, then the loop has
+ * timed out.
+ */
+#define omap_test_timeout(cond, timeout, index) \
+({ \
+ for (index = 0; index < timeout; index++) { \
+ if (cond) \
+ break; \
+ udelay(1); \
+ } \
+})
+
+extern struct device *omap2_get_mpuss_device(void);
+extern struct device *omap2_get_iva_device(void);
+extern struct device *omap2_get_l3_device(void);
+extern struct device *omap4_get_dsp_device(void);
+
+void omap2_init_irq(void);
+void omap3_init_irq(void);
+void ti81xx_init_irq(void);
+extern int omap_irq_pending(void);
+void omap_intc_save_context(void);
+void omap_intc_restore_context(void);
+void omap3_intc_suspend(void);
+void omap3_intc_prepare_idle(void);
+void omap3_intc_resume_idle(void);
+void omap2_intc_handle_irq(struct pt_regs *regs);
+void omap3_intc_handle_irq(struct pt_regs *regs);
+
+/*
+ * wfi used in low power code. Directly opcode is used instead
+ * of instruction to avoid mulit-omap build break
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+#define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory")
+#else
+#define do_wfi() \
+ __asm__ __volatile__ (".word 0xe320f003" : : : "memory")
+#endif
+
+#ifdef CONFIG_CACHE_L2X0
+extern void __iomem *l2cache_base;
+#endif
+
+extern void __init gic_init_irq(void);
+extern void omap_smc1(u32 fn, u32 arg);
+
+#ifdef CONFIG_SMP
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
+extern void omap_auxcoreboot_addr(u32 cpu_addr);
+extern u32 omap_read_auxcoreboot0(void);
+#endif
+
+#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
#include <linux/kernel.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/sdrc.h>
#include "cm-regbits-34xx.h"
#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00
#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60
-/* TI816X spefic control submodules */
-#define TI816X_CONTROL_DEVCONF 0x600
+/* TI81XX spefic control submodules */
+#define TI81XX_CONTROL_DEVCONF 0x600
/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
-/* TI816X CONTROL_DEVCONF register offsets */
-#define TI816X_CONTROL_DEVICE_ID (TI816X_CONTROL_DEVCONF + 0x000)
+/* TI81XX CONTROL_DEVCONF register offsets */
+#define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000)
/*
* REVISIT: This list of registers is not comprehensive - there are more
#include "pm.h"
#include "control.h"
+#include "common.h"
#ifdef CONFIG_CPU_IDLE
static inline void omap_init_mcpdm(void) {}
#endif
+#if defined(CONFIG_SND_OMAP_SOC_DMIC) || \
+ defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE)
+
+static void omap_init_dmic(void)
+{
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
+
+ oh = omap_hwmod_lookup("dmic");
+ if (!oh) {
+ printk(KERN_ERR "Could not look up mcpdm hw_mod\n");
+ return;
+ }
+
+ pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0, NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for omap-dmic.\n");
+}
+#else
+static inline void omap_init_dmic(void) {}
+#endif
+
#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <plat/mcspi.h>
*/
omap_init_audio();
omap_init_mcpdm();
+ omap_init_dmic();
omap_init_camera();
omap_init_mbox();
omap_init_mcspi();
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/delay.h>
#include <video/omapdss.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include <plat/omap-pm.h>
-#include <plat/common.h>
+#include "common.h"
#include "control.h"
#include "display.h"
#include <plat/cpu.h>
#include <plat/i2c.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/omap_hwmod.h>
#include "mux.h"
#include <asm/cputype.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include <mach/id.h>
}
}
-static void __init ti816x_check_features(void)
+static void __init ti81xx_check_features(void)
{
omap_features = OMAP3_HAS_NEON;
}
break;
}
break;
+ case 0xb944:
+ omap_revision = AM335X_REV_ES1_0;
+ *cpu_rev = "1.0";
+ case 0xb8f2:
+ switch (rev) {
+ case 0:
+ /* FALLTHROUGH */
+ case 1:
+ omap_revision = TI8148_REV_ES1_0;
+ *cpu_rev = "1.0";
+ break;
+ case 2:
+ omap_revision = TI8148_REV_ES2_0;
+ *cpu_rev = "2.0";
+ break;
+ case 3:
+ /* FALLTHROUGH */
+ default:
+ omap_revision = TI8148_REV_ES2_1;
+ *cpu_rev = "2.1";
+ break;
+ }
+ break;
default:
/* Unknown default to latest silicon rev as default */
omap_revision = OMAP3630_REV_ES1_2;
* Few initial 4430 ES2.0 samples IDCODE is same as ES1.0
* Use ARM register to detect the correct ES version
*/
- if (!rev && (hawkeye != 0xb94e)) {
+ if (!rev && (hawkeye != 0xb94e) && (hawkeye != 0xb975)) {
idcode = read_cpuid(CPUID_ID);
rev = (idcode & 0xf) - 1;
}
omap_revision = OMAP4430_REV_ES2_1;
break;
case 4:
- default:
omap_revision = OMAP4430_REV_ES2_2;
+ break;
+ case 6:
+ default:
+ omap_revision = OMAP4430_REV_ES2_3;
}
break;
case 0xb94e:
break;
}
break;
+ case 0xb975:
+ switch (rev) {
+ case 0:
+ default:
+ omap_revision = OMAP4470_REV_ES1_0;
+ break;
+ }
+ break;
default:
/* Unknown default to latest silicon rev as default */
- omap_revision = OMAP4430_REV_ES2_2;
+ omap_revision = OMAP4430_REV_ES2_3;
}
pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16,
cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
} else if (cpu_is_ti816x()) {
cpu_name = "TI816X";
+ } else if (cpu_is_am335x()) {
+ cpu_name = "AM335X";
+ } else if (cpu_is_ti814x()) {
+ cpu_name = "TI814X";
} else if (omap3_has_iva() && omap3_has_sgx()) {
/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
cpu_name = "OMAP3430/3530";
} else if (cpu_is_omap34xx()) {
omap3_check_revision(&cpu_rev);
- /* TI816X doesn't have feature register */
- if (!cpu_is_ti816x())
+ /* TI81XX doesn't have feature register */
+ if (!cpu_is_ti81xx())
omap3_check_features();
else
- ti816x_check_features();
+ ti81xx_check_features();
omap3_cpuinfo(cpu_rev);
return;
beq 34f @ configure OMAP3UART4
cmp \rp, #OMAP4UART4 @ only on 44xx
beq 44f @ configure OMAP4UART4
- cmp \rp, #TI816XUART1 @ ti816x UART offsets different
+ cmp \rp, #TI81XXUART1 @ ti81Xx UART offsets different
beq 81f @ configure UART1
- cmp \rp, #TI816XUART2 @ ti816x UART offsets different
+ cmp \rp, #TI81XXUART2 @ ti81Xx UART offsets different
beq 82f @ configure UART2
- cmp \rp, #TI816XUART3 @ ti816x UART offsets different
+ cmp \rp, #TI81XXUART3 @ ti81Xx UART offsets different
beq 83f @ configure UART3
cmp \rp, #ZOOM_UART @ only on zoom2/3
beq 95f @ configure ZOOM_UART
b 98f
44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE)
b 98f
-81: mov \rp, #UART_OFFSET(TI816X_UART1_BASE)
+81: mov \rp, #UART_OFFSET(TI81XX_UART1_BASE)
b 98f
-82: mov \rp, #UART_OFFSET(TI816X_UART2_BASE)
+82: mov \rp, #UART_OFFSET(TI81XX_UART2_BASE)
b 98f
-83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE)
+83: mov \rp, #UART_OFFSET(TI81XX_UART3_BASE)
b 98f
95: ldr \rp, =ZOOM_UART_BASE
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/irqs.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-
-#include <plat/multi.h>
-
-#define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
-#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#define OMAP4_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
-#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */
-#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
-/*
- * Unoptimized irq functions for multi-omap2, 3 and 4
- */
-
-#ifdef MULTI_OMAP2
- /*
- * Configure the interrupt base on the first interrupt.
- * See also omap_irq_base_init for setting omap_irq_base.
- */
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =omap_irq_base @ irq base address
- ldr \base, [\base, #0] @ irq base value
- .endm
-
- /* Check the pending interrupts. Note that base already set */
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- tst \base, #0x100 @ gic address?
- bne 4401f @ found gic
-
- /* Handle omap2 and omap3 */
- ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
- cmp \irqnr, #0x0
- bne 9998f
- ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
- cmp \irqnr, #0x0
- bne 9998f
- ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
- cmp \irqnr, #0x0
- bne 9998f
-
- /*
- * ti816x has additional IRQ pending register. Checking this
- * register on omap2 & omap3 has no effect (read as 0).
- */
- ldr \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
- cmp \irqnr, #0x0
-9998:
- ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
- and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
- b 9999f
-
- /* Handle omap4 */
-4401: ldr \irqstat, [\base, #GIC_CPU_INTACK]
- ldr \tmp, =1021
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #15
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
-9999:
- .endm
-
-#ifdef CONFIG_SMP
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt
- * on the controller, since this requires the original irqstat
- * value which we won't easily be able to recreate later.
- */
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- it cc
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- it cs
- cmpcs \irqnr, \irqnr
- .endm
-#endif /* CONFIG_SMP */
-
-#else /* MULTI_OMAP2 */
-
-
-/*
- * Optimized irq functions for omap2, 3 and 4
- */
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- .macro get_irqnr_preamble, base, tmp
-#ifdef CONFIG_ARCH_OMAP2
- ldr \base, =OMAP2_IRQ_BASE
-#else
- ldr \base, =OMAP3_IRQ_BASE
-#endif
- .endm
-
- /* Check the pending interrupts. Note that base already set */
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
- cmp \irqnr, #0x0
- bne 9999f
- ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
- cmp \irqnr, #0x0
- bne 9999f
- ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
- cmp \irqnr, #0x0
-#ifdef CONFIG_SOC_OMAPTI816X
- bne 9999f
- ldr \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
- cmp \irqnr, #0x0
-#endif
-9999:
- ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
- and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-
- .endm
-#endif
-
-
-#ifdef CONFIG_ARCH_OMAP4
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =OMAP4_IRQ_BASE
- .endm
-
-#endif
-
-#endif /* MULTI_OMAP2 */
+++ /dev/null
-/*
- * omap4-common.h: OMAP4 specific common header file
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * Author:
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP_ARCH_OMAP4_COMMON_H
-#define OMAP_ARCH_OMAP4_COMMON_H
-
-/*
- * wfi used in low power code. Directly opcode is used instead
- * of instruction to avoid mulit-omap build break
- */
-#ifdef CONFIG_THUMB2_KERNEL
-#define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory")
-#else
-#define do_wfi() \
- __asm__ __volatile__ (".word 0xe320f003" : : : "memory")
-#endif
-
-#ifdef CONFIG_CACHE_L2X0
-extern void __iomem *l2cache_base;
-#endif
-
-extern void __iomem *gic_dist_base_addr;
-
-extern void __init gic_init_irq(void);
-extern void omap_smc1(u32 fn, u32 arg);
-
-#ifdef CONFIG_SMP
-/* Needed for secondary core boot */
-extern void omap_secondary_startup(void);
-extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
-extern void omap_auxcoreboot_addr(u32 cpu_addr);
-extern u32 omap_read_auxcoreboot0(void);
-#endif
-#endif
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xf8000000UL
#include "clock3xxx.h"
#include "clock44xx.h"
-#include <plat/common.h>
+#include "common.h"
#include <plat/omap-pm.h>
#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/omap_hwmod.h>
#include <plat/multi.h>
-#include <plat/common.h>
+#include "common.h"
/*
* The machine specific code may provide the extra mapping besides the
};
#endif
-#ifdef CONFIG_SOC_OMAPTI816X
-static struct map_desc omapti816x_io_desc[] __initdata = {
+#ifdef CONFIG_SOC_OMAPTI81XX
+static struct map_desc omapti81xx_io_desc[] __initdata = {
+ {
+ .virtual = L4_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_34XX_PHYS),
+ .length = L4_34XX_SIZE,
+ .type = MT_DEVICE
+ }
+};
+#endif
+
+#ifdef CONFIG_SOC_OMAPAM33XX
+static struct map_desc omapam33xx_io_desc[] __initdata = {
{
.virtual = L4_34XX_VIRT,
.pfn = __phys_to_pfn(L4_34XX_PHYS),
.length = L4_34XX_SIZE,
.type = MT_DEVICE
},
+ {
+ .virtual = L4_WK_AM33XX_VIRT,
+ .pfn = __phys_to_pfn(L4_WK_AM33XX_PHYS),
+ .length = L4_WK_AM33XX_SIZE,
+ .type = MT_DEVICE
+ }
};
#endif
}
#endif
-#ifdef CONFIG_SOC_OMAPTI816X
-void __init omapti816x_map_common_io(void)
+#ifdef CONFIG_SOC_OMAPTI81XX
+void __init omapti81xx_map_common_io(void)
+{
+ iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc));
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAPAM33XX
+void __init omapam33xx_map_common_io(void)
{
- iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc));
+ iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc));
}
#endif
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
-/* See irq.c, omap4-common.c and entry-macro.S */
-void __iomem *omap_irq_base;
-
static void __init omap_common_init_early(void)
{
omap2_check_revision();
- omap_ioremap_init();
omap_init_consistent_dma_size();
}
omap3_init_early();
}
-void __init ti816x_init_early(void)
+void __init ti81xx_init_early(void)
{
- omap2_set_globals_ti816x();
+ omap2_set_globals_ti81xx();
omap_common_init_early();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
#include <linux/interrupt.h>
#include <linux/io.h>
#include <mach/hardware.h>
+#include <asm/exception.h>
#include <asm/mach/irq.h>
/* Number of IRQ state bits in each MIR register */
#define IRQ_BITS_PER_REG 32
+#define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
+#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */
+#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */
+
/*
* OMAP2 has a number of different interrupt controllers, each interrupt
* controller is identified as its own "bank". Register definitions are
static void __init omap_init_irq(u32 base, int nr_irqs)
{
+ void __iomem *omap_irq_base;
unsigned long nr_of_irqs = 0;
unsigned int nr_banks = 0;
int i, j;
omap_init_irq(OMAP34XX_IC_BASE, 96);
}
-void __init ti816x_init_irq(void)
+void __init ti81xx_init_irq(void)
{
omap_init_irq(OMAP34XX_IC_BASE, 128);
}
+static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs)
+{
+ u32 irqnr;
+
+ do {
+ irqnr = readl_relaxed(base_addr + 0x98);
+ if (irqnr)
+ goto out;
+
+ irqnr = readl_relaxed(base_addr + 0xb8);
+ if (irqnr)
+ goto out;
+
+ irqnr = readl_relaxed(base_addr + 0xd8);
+#ifdef CONFIG_SOC_OMAPTI816X
+ if (irqnr)
+ goto out;
+ irqnr = readl_relaxed(base_addr + 0xf8);
+#endif
+
+out:
+ if (!irqnr)
+ break;
+
+ irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET);
+ irqnr &= ACTIVEIRQ_MASK;
+
+ if (irqnr)
+ handle_IRQ(irqnr, regs);
+ } while (irqnr);
+}
+
+asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs)
+{
+ void __iomem *base_addr = OMAP2_IRQ_BASE;
+ omap_intc_handle_irq(base_addr, regs);
+}
+
#ifdef CONFIG_ARCH_OMAP3
static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
/* Re-enable autoidle */
intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
}
+
+asmlinkage void __exception_irq_entry omap3_intc_handle_irq(struct pt_regs *regs)
+{
+ void __iomem *base_addr = OMAP3_IRQ_BASE;
+ omap_intc_handle_irq(base_addr, regs);
+}
#endif /* CONFIG_ARCH_OMAP3 */
#include <linux/smp.h>
#include <asm/cacheflush.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
int platform_cpu_kill(unsigned int cpu)
{
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
/* SCU base address */
static void __iomem *scu_base;
#include <plat/irqs.h>
#include <mach/hardware.h>
-#include <mach/omap4-common.h>
+
+#include "common.h"
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2cache_base;
#endif
-void __iomem *gic_dist_base_addr;
-
-
void __init gic_init_irq(void)
{
+ void __iomem *omap_irq_base;
+ void __iomem *gic_dist_base_addr;
+
/* Static mapping, never released */
gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
BUG_ON(!gic_dist_base_addr);
#include <linux/mutex.h>
#include <linux/spinlock.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include "clockdomain.h"
#include "powerdomain.h"
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
}
+
+void ti81xx_musb_phy_power(u8 on)
+{
+ void __iomem *scm_base = NULL;
+ u32 usbphycfg;
+
+ scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K);
+ if (!scm_base) {
+ pr_err("system control module ioremap failed\n");
+ return;
+ }
+
+ usbphycfg = __raw_readl(scm_base + USBCTRL0);
+
+ if (on) {
+ if (cpu_is_ti816x()) {
+ usbphycfg |= TI816X_USBPHY0_NORMAL_MODE;
+ usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC;
+ } else if (cpu_is_ti814x()) {
+ usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN
+ | USBPHY_DPINPUT | USBPHY_DMINPUT);
+ usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN
+ | USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL);
+ }
+ } else {
+ if (cpu_is_ti816x())
+ usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE;
+ else if (cpu_is_ti814x())
+ usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
+
+ }
+ __raw_writel(usbphycfg, scm_base + USBCTRL0);
+
+ iounmap(scm_base);
+}
unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */
unsigned long cm_clksel_mdm; /* modem dividers 2430 only */
unsigned long base_sdrc_rfr; /* base refresh timing for a set */
- unsigned char flags;
+ unsigned short flags;
};
#include <plat/omap-pm.h>
#include <plat/omap_device.h>
-#include <plat/common.h>
+#include "common.h"
#include "voltage.h"
#include "powerdomain.h"
#include <plat/dma.h>
#include <plat/board.h>
+#include "common.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm2xxx_3xxx.h"
#include <plat/gpmc.h>
#include <plat/dma.h>
+#include "common.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
#include <linux/err.h>
#include <linux/slab.h>
+#include "common.h"
#include "powerdomain.h"
-#include <mach/omap4-common.h>
struct power_state {
struct powerdomain *pwrdm;
#include <linux/export.h>
#include <mach/system.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/prcm.h>
#include <plat/irqs.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "prcm_mpu44xx.h"
#include "cm-regbits-44xx.h"
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm44xx.h"
#include "prminst44xx.h"
/*
* SDRC register values for Nokia boards
*
- * Copyright (C) 2008, 2010 Nokia Corporation
+ * Copyright (C) 2008, 2010-2011 Nokia Corporation
*
* Lauri Leukkunen <lauri.leukkunen@nokia.com>
*
#include <linux/io.h>
#include <plat/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/clock.h>
#include <plat/sdrc.h>
},
};
+static const struct sdram_timings nokia_200mhz_timings[] = {
+ {
+ .casl = 3,
+ .tDAL = 30000,
+ .tDPL = 15000,
+ .tRRD = 10000,
+ .tRCD = 20000,
+ .tRP = 15000,
+ .tRAS = 40000,
+ .tRC = 55000,
+ .tRFC = 140000,
+ .tXSR = 200000,
+
+ .tREF = 7800,
+
+ .tXP = 2,
+ .tCKE = 4,
+ .tWTR = 2
+ },
+};
+
static const struct {
long rate;
struct sdram_timings const *data;
} nokia_timings[] = {
{ 83000000, nokia_166mhz_timings },
{ 97600000, nokia_97dot6mhz_timings },
+ { 100000000, nokia_200mhz_timings },
{ 166000000, nokia_166mhz_timings },
{ 195200000, nokia_195dot2mhz_timings },
+ { 200000000, nokia_200mhz_timings },
};
static struct omap_sdrc_params nokia_sdrc_params[ARRAY_SIZE(nokia_timings) + 1];
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/clock.h>
#include <plat/sram.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/omap-serial.h>
#endif
-#include <plat/common.h>
+#include "common.h"
#include <plat/board.h>
#include <plat/clock.h>
#include <plat/dma.h>
mod_timer(&uart->timer, jiffies + uart->timeout);
omap_uart_smart_idle_enable(uart, 0);
- if (cpu_is_omap34xx() && !cpu_is_ti816x()) {
+ if (cpu_is_omap34xx() && !(cpu_is_ti81xx() || cpu_is_am33xx())) {
u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD;
u32 wk_mask = 0;
u32 padconf = 0;
*/
uart->regshift = p->regshift;
uart->membase = p->membase;
- if (cpu_is_omap44xx() || cpu_is_ti816x())
+ if (cpu_is_omap44xx() || cpu_is_ti81xx())
uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF)
>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
}
/* Enable the MDR1 errata for OMAP3 */
- if (cpu_is_omap34xx() && !cpu_is_ti816x())
+ if (cpu_is_omap34xx() && !(cpu_is_ti81xx() || cpu_is_am33xx()))
uart->errata |= UART_ERRATA_i202_MDR1_ACCESS;
}
#include <linux/slab.h>
#include <linux/pm_runtime.h>
-#include <plat/common.h>
+#include "common.h"
#include "pm.h"
#include "smartreflex.h"
#include <plat/dmtimer.h>
#include <asm/localtimer.h>
#include <asm/sched_clock.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include <plat/omap-pm.h>
if (cpu_is_omap3517() || cpu_is_omap3505()) {
oh_name = "am35x_otg_hs";
name = "musb-am35x";
+ } else if (cpu_is_ti81xx()) {
+ oh_name = "usb_otg_hs";
+ name = "musb-ti81xx";
} else {
oh_name = "usb_otg_hs";
name = "musb-omap2430";
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm-regbits-34xx.h"
#include "voltage.h"
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include <linux/slab.h>
#include <linux/clk.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm-regbits-34xx.h"
#include "prm-regbits-44xx.h"
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include <plat/cpu.h>
#include "prm-regbits-34xx.h"
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm-regbits-44xx.h"
#include "prm44xx.h"
#include <linux/kernel.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "voltage.h"
#include "vp.h"
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm-regbits-34xx.h"
#include "voltage.h"
#include <linux/err.h>
#include <linux/init.h>
-#include <plat/common.h>
+#include "common.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#define IO_SPACE_LIMIT 0xffffffff
-static inline void __iomem *
-__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
-{
- void __iomem *retval;
- unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE;
- if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE &&
- size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) {
- retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs;
- } else {
- retval = __arm_ioremap(paddr, size, mtype);
- }
-
- return retval;
-}
-
-static inline void
-__arch_iounmap(void __iomem *addr)
-{
- if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
- addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
- __iounmap(addr);
-}
-
-#define __arch_ioremap __arch_ioremap
-#define __arch_iounmap __arch_iounmap
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
+++ /dev/null
-/*
- * arch/arm/mach-orion5x/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfd800000UL
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
};
static const struct of_device_id vic_of_match[] __initconst = {
- { .compatible = "arm,pl192-vic" },
+ { .compatible = "arm,pl192-vic", .data = vic_of_init, },
{ /* Sentinel */ }
};
static void __init picoxcell_init_irq(void)
{
- vic_init(IO_ADDRESS(PICOXCELL_VIC0_BASE), 0, ~0, 0);
- vic_init(IO_ADDRESS(PICOXCELL_VIC1_BASE), 32, ~0, 0);
- irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC0_BASE, 0);
- irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC1_BASE, 32);
+ of_irq_init(vic_of_match);
}
DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
.map_io = picoxcell_map_io,
.nr_irqs = ARCH_NR_IRQS,
.init_irq = picoxcell_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &picoxcell_timer,
.init_machine = picoxcell_init_machine,
.dt_compat = picoxcell_dt_match,
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/map.h>
+ .macro disable_fiq
+ .endm
-#define VA_VIC0 IO_ADDRESS(PICOXCELL_VIC0_BASE)
-#define VA_VIC1 IO_ADDRESS(PICOXCELL_VIC1_BASE)
-
-#include <asm/entry-macro-vic2.S>
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+++ /dev/null
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#define VMALLOC_END 0xfe000000UL
static inline void arch_reset(char mode, const char *cmd)
{
- cpu_reset(0);
+ soft_restart(0);
}
#endif
+++ /dev/null
-/*
- * arch/arm/mach-pnx4008/include/mach/vmalloc.h
- *
- * Author: Vitaly Wool <source@mvista.com>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts. That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END 0xd0000000UL
#ifndef __MACH_PRIMA2_MAP_H__
#define __MACH_PRIMA2_MAP_H__
-#include <mach/vmalloc.h>
+#include <linux/const.h>
-#define SIRFSOC_VA(x) (VMALLOC_END + ((x) & 0x00FFF000))
+#define SIRFSOC_VA_BASE _AC(0xFEC00000, UL)
+
+#define SIRFSOC_VA(x) (SIRFSOC_VA_BASE + ((x) & 0x00FFF000))
#endif
+++ /dev/null
-/*
- * arch/arm/ach-prima2/include/mach/vmalloc.h
- *
- * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_VMALLOC_H
-#define __MACH_VMALLOC_H
-
-#include <linux/const.h>
-
-#define VMALLOC_END _AC(0xFEC00000, UL)
-
-#endif
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/irqs.h>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mrc p15, 0, \tmp, c0, c0, 0 @ CPUID
- mov \tmp, \tmp, lsr #13
- and \tmp, \tmp, #0x7 @ Core G
- cmp \tmp, #1
- bhi 1002f
-
- @ Core Generation 1 (PXA25x)
- mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000
- add \base, \base, #0x00d00000
- ldr \irqstat, [\base, #0] @ ICIP
- ldr \irqnr, [\base, #4] @ ICMR
-
- ands \irqnr, \irqstat, \irqnr
- beq 1001f
- rsb \irqstat, \irqnr, #0
- and \irqstat, \irqstat, \irqnr
- clz \irqnr, \irqstat
- rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0))
- b 1001f
-1002:
- @ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx)
- mrc p6, 0, \irqstat, c5, c0, 0 @ ICHP
- tst \irqstat, #0x80000000
- beq 1001f
- bic \irqstat, \irqstat, #0x80000000
- mov \irqnr, \irqstat, lsr #16
- add \irqnr, \irqnr, #(PXA_IRQ(0))
-1001:
- .endm
+++ /dev/null
-/*
- * arch/arm/mach-pxa/include/mach/vmalloc.h
- *
- * Author: Nicolas Pitre
- * Copyright: (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END (0xe8000000UL)
MACHINE_START(MIOA701, "MIO A701")
.atag_offset = 0x100,
+ .restart_mode = 's',
.map_io = &pxa27x_map_io,
.init_irq = &pxa27x_init_irq,
.handle_irq = &pxa27x_handle_irq,
arm_machine_restart('h', NULL);
}
-static void poodle_restart(char mode, const char *cmd)
-{
- arm_machine_restart('h', cmd);
-}
-
static void __init poodle_init(void)
{
int ret = 0;
pm_power_off = poodle_poweroff;
- arm_pm_restart = poodle_restart;
PCFR |= PCFR_OPDE;
switch (mode) {
case 's':
/* Jump into ROM at address 0 */
- cpu_reset(0);
+ soft_restart(0);
break;
case 'g':
do_gpio_reset();
#ifdef CONFIG_MACH_SPITZ
MACHINE_START(SPITZ, "SHARP Spitz")
+ .restart_mode = 'g',
.fixup = spitz_fixup,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
#ifdef CONFIG_MACH_BORZOI
MACHINE_START(BORZOI, "SHARP Borzoi")
+ .restart_mode = 'g',
.fixup = spitz_fixup,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
#ifdef CONFIG_MACH_AKITA
MACHINE_START(AKITA, "SHARP Akita")
+ .restart_mode = 'g',
.fixup = spitz_fixup,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
}
MACHINE_START(TOSA, "SHARP Tosa")
+ .restart_mode = 'g',
.fixup = fixup_tosa,
.map_io = pxa25x_map_io,
.nr_irqs = TOSA_NR_IRQS,
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
+++ /dev/null
-/*
- * arch/arm/mach-realview/include/mach/vmalloc.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xf8000000UL
static struct map_desc realview_eb11mp_io_desc[] __initdata = {
{
- .virtual = IO_ADDRESS(REALVIEW_EB11MP_GIC_CPU_BASE),
- .pfn = __phys_to_pfn(REALVIEW_EB11MP_GIC_CPU_BASE),
+ .virtual = IO_ADDRESS(REALVIEW_EB11MP_SCU_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_EB11MP_SCU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_eb_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_eb_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_pb1176_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_pb1176_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_pb11mp_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_pb11mp_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_pba8_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_pba8_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
static struct map_desc realview_local_io_desc[] __initdata = {
{
- .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE),
- .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+ .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_SCU_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_SCU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.init_early = realview_init_early,
.init_irq = gic_init_irq,
.timer = &realview_pbx_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = realview_pbx_init,
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
/*
* Jump into the ROM
*/
- cpu_reset(0);
+ soft_restart(0);
}
+++ /dev/null
-/*
- * arch/arm/mach-rpc/include/mach/vmalloc.h
- *
- * Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END 0xdc000000UL
arch_reset(char mode, const char *cmd)
{
if (mode == 's') {
- cpu_reset(0);
+ soft_restart(0);
}
if (s3c24xx_reset_hook)
arch_wdt_reset();
/* we'll take a jump through zero as a poor second */
- cpu_reset(0);
+ soft_restart(0);
}
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
- *
- * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_HWSWP),
},
+ /* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/
+ [3] = {
+ _LCD_DECLARE(
+ /* clock */
+ 7,
+ /* xres, margin_right, margin_left, hsync */
+ 320, 68, 66, 4,
+ /* yres, margin_top, margin_bottom, vsync */
+ 240, 4, 4, 9,
+ /* refresh rate */
+ 60),
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVDEN |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVCLK |
+ S3C2410_LCDCON5_HWSWP),
+ },
};
/* todo - put into gpio header */
depends on MACH_SMDK6410
select REGULATOR
select REGULATOR_WM8350
- select S3C24XX_GPIO_EXTRA64
+ select SAMSUNG_GPIO_EXTRA64
select MFD_WM8350_I2C
select MFD_WM8350_CONFIG_MODE_0
select MFD_WM8350_CONFIG_MODE_3
depends on MACH_SMDK6410
select REGULATOR
select REGULATOR_WM831X
- select S3C24XX_GPIO_EXTRA64
+ select SAMSUNG_GPIO_EXTRA64
select MFD_WM831X
select MFD_WM831X_I2C
help
select S3C_DEV_WDT
select S3C_DEV_RTC
select S3C64XX_DEV_SPI
- select S3C24XX_GPIO_EXTRA128
+ select SAMSUNG_GPIO_EXTRA128
select I2C
help
Machine support for the Wolfson Cragganmore S3C6410 variant.
#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
+#define CODEC_IRQ_BASE (IRQ_BOARD_START + 128)
#define PCA935X_GPIO_BASE GPIO_BOARD_START
-#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
-#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16)
+#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 32)
+#define BANFF_PMIC_GPIO_BASE (GPIO_BOARD_START + 64)
#endif
* warranty of any kind, whether express or implied.
*/
-#include <mach/map.h>
-#include <mach/irqs.h>
+ .macro disable_fiq
+ .endm
-#include <asm/entry-macro-vic2.S>
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
/* define the number of gpios we need to the one after the GPQ() range */
#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
-#define BOARD_NR_GPIOS 16
+#define BOARD_NR_GPIOS (16 + CONFIG_SAMSUNG_GPIO_EXTRA)
#define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS)
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
#ifdef CONFIG_MACH_WLF_CRAGG_6410
-#define IRQ_BOARD_NR 128
+#define IRQ_BOARD_NR 160
#elif defined(CONFIG_SMDK6410_WM1190_EV1)
#define IRQ_BOARD_NR 64
#elif defined(CONFIG_SMDK6410_WM1192_EV1)
arch_wdt_reset();
/* if all else fails, or mode was for soft, jump to 0 */
- cpu_reset(0);
+ soft_restart(0);
}
#endif /* __ASM_ARCH_IRQ_H */
+++ /dev/null
-/* arch/arm/mach-s3c64xx/include/mach/vmalloc.h
- *
- * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C6400 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
#include <video/platform_lcd.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
.timer = &s3c24xx_timer,
#include <linux/mfd/wm831x/irq.h>
#include <linux/mfd/wm831x/gpio.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <sound/wm5100.h>
#include <sound/wm8996.h>
#include <sound/wm8962.h>
#include <sound/wm9081.h>
#include <mach/crag6410.h>
+static struct wm5100_pdata wm5100_pdata = {
+ .ldo_ena = S3C64XX_GPN(7),
+ .irq_flags = IRQF_TRIGGER_HIGH,
+ .gpio_base = CODEC_GPIO_BASE,
+
+ .in_mode = {
+ WM5100_IN_DIFF,
+ WM5100_IN_DIFF,
+ WM5100_IN_DIFF,
+ WM5100_IN_SE,
+ },
+
+ .hp_pol = CODEC_GPIO_BASE + 3,
+ .jack_modes = {
+ { WM5100_MICDET_MICBIAS3, 0, 0 },
+ { WM5100_MICDET_MICBIAS2, 1, 1 },
+ },
+
+ .gpio_defaults = {
+ 0,
+ 0,
+ 0,
+ 0,
+ 0x2, /* IRQ: CMOS output */
+ 0x3, /* CLKOUT: CMOS output */
+ },
+};
+
static struct wm8996_retune_mobile_config wm8996_retune[] = {
{
.name = "Sub LPF",
0x8000 | WM8962_GPIO_FN_DMICDAT,
WM8962_GPIO_FN_IRQ, /* Open drain mode */
},
- .irq_active_low = true,
};
static struct wm9081_pdata wm9081_pdata __initdata = {
static const struct i2c_board_info wm1255_devs[] = {
{ I2C_BOARD_INFO("wm5100", 0x1a),
+ .platform_data = &wm5100_pdata,
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
},
{ I2C_BOARD_INFO("wm9081", 0x6c),
},
};
+static struct wm8994_pdata wm8994_pdata = {
+ .gpio_base = CODEC_GPIO_BASE,
+ .gpio_defaults = {
+ 0x3, /* IRQ out, active high, CMOS */
+ },
+ .irq_base = CODEC_IRQ_BASE,
+ .ldo = {
+ { .supply = "WALLVDD" },
+ { .supply = "WALLVDD" },
+ },
+};
+
+static const struct i2c_board_info wm1277_devs[] = {
+ { I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */
+ .platform_data = &wm8994_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+};
static __devinitdata const struct {
u8 id;
{ .id = 0x3b, .name = "1255-EV1 Kilchoman",
.i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
+ { .id = 0x3d, .name = "1277-EV1 Littlemill",
+ .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
};
static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
"Failed to register dev: %d\n", ret);
}
} else {
- dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n",
- id, rev);
+ dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n",
+ id, rev + 1);
}
return 0;
#include <linux/mfd/wm831x/irq.h>
#include <linux/mfd/wm831x/gpio.h>
+#include <sound/wm1250-ev1.h>
+
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
.id = -1,
};
+static struct platform_device littlemill_device = {
+ .name = "littlemill",
+ .id = -1,
+};
+
static struct regulator_consumer_supply wallvdd_consumers[] = {
REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
&crag6410_backlight_device,
&speyside_device,
&speyside_wm8962_device,
+ &littlemill_device,
&lowland_device,
&wallvdd_device,
};
.driver_data = &vddarm_pdata,
};
+static struct regulator_consumer_supply vddint_consumers[] __initdata = {
+ REGULATOR_SUPPLY("vddint", NULL),
+};
+
static struct regulator_init_data vddint __initdata = {
.constraints = {
.name = "VDDINT",
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
+ .num_consumer_supplies = ARRAY_SIZE(vddint_consumers),
+ .consumer_supplies = vddint_consumers,
+ .supply_regulator = "WALLVDD",
};
static struct regulator_init_data vddmem __initdata = {
static struct wm831x_pdata crag_pmic_pdata __initdata = {
.wm831x_num = 1,
.irq_base = BANFF_PMIC_IRQ_BASE,
- .gpio_base = GPIO_BOARD_START + 8,
+ .gpio_base = BANFF_PMIC_GPIO_BASE,
+ .soft_shutdown = true,
.backup = &banff_backup_pdata,
.wm831x_num = 2,
.irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
.gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
+ .soft_shutdown = true,
.gpio_defaults = {
/* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */
.disable_touch = true,
};
+static struct wm1250_ev1_pdata wm1250_ev1_pdata = {
+ .gpios = {
+ [WM1250_EV1_GPIO_CLK_ENA] = S3C64XX_GPN(12),
+ [WM1250_EV1_GPIO_CLK_SEL0] = S3C64XX_GPL(12),
+ [WM1250_EV1_GPIO_CLK_SEL1] = S3C64XX_GPL(13),
+ [WM1250_EV1_GPIO_OSR] = S3C64XX_GPL(14),
+ [WM1250_EV1_GPIO_MASTER] = S3C64XX_GPL(8),
+ },
+};
+
static struct i2c_board_info i2c_devs1[] __initdata = {
{ I2C_BOARD_INFO("wm8311", 0x34),
.irq = S3C_EINT(0),
{ I2C_BOARD_INFO("wlf-gf-module", 0x25) },
{ I2C_BOARD_INFO("wlf-gf-module", 0x26) },
- { I2C_BOARD_INFO("wm1250-ev1", 0x27) },
+ { I2C_BOARD_INFO("wm1250-ev1", 0x27),
+ .platform_data = &wm1250_ev1_pdata },
+};
+
+static struct s3c2410_platform_i2c i2c1_pdata = {
+ .frequency = 400000,
+ .bus_num = 1,
};
static void __init crag6410_map_io(void)
s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);
s3c_i2c0_set_platdata(&i2c0_pdata);
- s3c_i2c1_set_platdata(NULL);
+ s3c_i2c1_set_platdata(&i2c1_pdata);
s3c_fb_set_platdata(&crag6410_lcd_pdata);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
.timer = &s3c24xx_timer,
#include <mach/hardware.h>
#include <mach/map.h>
+#include <asm/hardware/vic.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
.timer = &s3c24xx_timer,
#include <linux/serial_core.h>
#include <linux/types.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
.timer = &s3c24xx_timer,
#include <video/platform_lcd.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
/* Maintainer: Samsung Electronics */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
.timer = &s3c24xx_timer,
#include <linux/serial_core.h>
#include <linux/types.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
.timer = &s3c24xx_timer,
#include <linux/leds.h>
#include <linux/platform_device.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
.timer = &s3c24xx_timer,
#include <linux/leds.h>
#include <linux/platform_device.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
.timer = &s3c24xx_timer,
#include <asm/mach-types.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
.atag_offset = 0x100,
.init_irq = s3c6400_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
.timer = &s3c24xx_timer,
#include <video/platform_lcd.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
.timer = &s3c24xx_timer,
SAVE_ITEM(S3C64XX_SDMA_SEL),
SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
+
+ SAVE_ITEM(S3C64XX_NORMAL_CFG),
};
void s3c_pm_configure_extint(void)
static int s3c64xx_pm_init(void)
{
+ u32 val;
+
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
pm_uart_udivslot = 1;
+ /*
+ * Unconditionally disable power domains that contain only
+ * blocks which have no mainline driver support.
+ */
+ val = __raw_readl(S3C64XX_NORMAL_CFG);
+ val &= ~(S3C64XX_NORMALCFG_DOMAIN_G_ON |
+ S3C64XX_NORMALCFG_DOMAIN_V_ON |
+ S3C64XX_NORMALCFG_DOMAIN_I_ON |
+ S3C64XX_NORMALCFG_DOMAIN_P_ON);
+ __raw_writel(val, S3C64XX_NORMAL_CFG);
+
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
* published by the Free Software Foundation.
*/
-#include <mach/map.h>
-#include <plat/irqs.h>
+ .macro disable_fiq
+ .endm
-#include <asm/entry-macro-vic2.S>
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+++ /dev/null
-/* linux/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C6400 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
#include <video/platform_lcd.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/irq.h>
.atag_offset = 0x100,
.init_irq = s5p6440_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smdk6440_map_io,
.init_machine = smdk6440_machine_init,
.timer = &s5p_timer,
#include <video/platform_lcd.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/irq.h>
.atag_offset = 0x100,
.init_irq = s5p6450_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smdk6450_map_io,
.init_machine = smdk6450_machine_init,
.timer = &s5p_timer,
* warranty of any kind, whether express or implied.
*/
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =VA_VIC0
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- @ check the vic0
- mov \irqnr, # S5P_IRQ_OFFSET + 31
- ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
- teq \irqstat, #0
-
- @ otherwise try vic1
- addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- @ otherwise try vic2
- addeq \tmp, \base, #(VA_VIC2 - VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
.endm
+++ /dev/null
-/* arch/arm/mach-s5pc100/include/mach/vmalloc.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C6400 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
#include <linux/input.h>
#include <linux/pwm_backlight.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
/* Maintainer: Byungho Min <bhmin@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pc100_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
.timer = &s3c24xx_timer,
* published by the Free Software Foundation.
*/
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =VA_VIC0
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- @ check the vic0
- mov \irqnr, # S5P_IRQ_OFFSET + 31
- ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
- teq \irqstat, #0
-
- @ otherwise try vic1
- addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- @ otherwise try vic2
- addeq \tmp, \base, #(VA_VIC2 - VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- @ otherwise try vic3
- addeq \tmp, \base, #(VA_VIC3 - VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/vmalloc.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on arch/arm/mach-s5p6442/include/mach/vmalloc.h
- *
- * S5PV210 vmalloc definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H __FILE__
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
#include <linux/input.h>
#include <linux/gpio.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
.timer = &s5p_timer,
#include <linux/gpio.h>
#include <linux/interrupt.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = goni_map_io,
.init_machine = goni_machine_init,
.timer = &s5p_timer,
#include <linux/i2c.h>
#include <linux/sysdev.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
.timer = &s5p_timer,
#include <linux/delay.h>
#include <linux/pwm_backlight.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
.timer = &s5p_timer,
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
/* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
.atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = torbreck_map_io,
.init_machine = torbreck_machine_init,
.timer = &s5p_timer,
{
if (mode == 's') {
/* Jump into ROM at address 0 */
- cpu_reset(0);
+ soft_restart(0);
} else {
/* Use on-chip reset capability */
RSRR = RSRR_SWR;
+++ /dev/null
-/*
- * arch/arm/mach-sa1100/include/mach/vmalloc.h
- */
-#define VMALLOC_END (0xe8000000UL)
void arch_reset(char mode, const char *cmd)
{
short temp;
- local_irq_disable();
/* Reset the Machine via pc[3] of the sequoia chipset */
outw(0x09,0x24);
temp=inw(0x26);
+++ /dev/null
-/*
- * arch/arm/mach-shark/include/mach/vmalloc.h
- */
-#define VMALLOC_END 0xd0000000UL
obj-$(CONFIG_ARCH_SH7367) += entry-intc.o
obj-$(CONFIG_ARCH_SH7377) += entry-intc.o
obj-$(CONFIG_ARCH_SH7372) += entry-intc.o
-obj-$(CONFIG_ARCH_SH73A0) += entry-gic.o
# PM objects
obj-$(CONFIG_SUSPEND) += suspend.o
MACHINE_START(AG5EVM, "ag5evm")
.map_io = ag5evm_map_io,
.init_irq = sh73a0_init_irq,
- .handle_irq = shmobile_handle_irq_gic,
+ .handle_irq = gic_handle_irq,
.init_machine = ag5evm_init,
.timer = &ag5evm_timer,
MACHINE_END
MACHINE_START(KOTA2, "kota2")
.map_io = kota2_map_io,
.init_irq = kota2_init_irq,
- .handle_irq = shmobile_handle_irq_gic,
+ .handle_irq = gic_handle_irq,
.init_machine = kota2_init,
.timer = &kota2_timer,
MACHINE_END
+++ /dev/null
-/*
- * ARM Interrupt demux handler using GIC
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2011 Paul Mundt
- * Copyright (C) 2010 - 2011 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/assembler.h>
-#include <asm/entry-macro-multi.S>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/entry-macro-gic.S>
-
- arch_irq_handler shmobile_handle_irq_gic
struct clk;
extern int clk_init(void);
extern void shmobile_handle_irq_intc(struct pt_regs *);
-extern void shmobile_handle_irq_gic(struct pt_regs *);
extern struct platform_suspend_ops shmobile_suspend_ops;
struct cpuidle_driver;
extern void (*shmobile_cpuidle_modes[])(void);
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- .endm
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
static inline void arch_reset(char mode, const char *cmd)
{
- cpu_reset(0);
+ soft_restart(0);
}
#endif
+++ /dev/null
-#ifndef __ASM_MACH_VMALLOC_H
-#define __ASM_MACH_VMALLOC_H
-
-/* Vmalloc at ... - 0xe5ffffff */
-#define VMALLOC_END 0xe6000000UL
-
-#endif /* __ASM_MACH_VMALLOC_H */
* warranty of any kind, whether express or implied.
*/
-#include <asm/hardware/vic.h>
-#include <mach/hardware.h>
-
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =VA_SPEAR3XX_ML1_VIC_BASE
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status
- teq \irqstat, #0
- beq 1001f @ this will set/reset
- @ zero register
- /*
- * Following code will find bit position of least significang
- * bit set in irqstat, using following equation
- * least significant bit set in n = (n & ~(n-1))
- */
- sub \tmp, \irqstat, #1 @ tmp = irqstat - 1
- mvn \tmp, \tmp @ tmp = ~tmp
- and \irqstat, \irqstat, \tmp @ irqstat &= tmp
- /* Now, irqstat is = bit no. of 1st bit set in vic irq status */
- clz \tmp, \irqstat @ tmp = leading zeros
- rsb \irqnr, \tmp, #0x1F @ irqnr = 32 - tmp - 1
-
-1001: /* EQ will be set if no irqs pending */
- .endm
+++ /dev/null
-/*
- * arch/arm/mach-spear3xx/include/mach/vmalloc.h
- *
- * Defining Vmalloc area for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_VMALLOC_H
-#define __MACH_VMALLOC_H
-
-#include <plat/vmalloc.h>
-
-#endif /* __MACH_VMALLOC_H */
* warranty of any kind, whether express or implied.
*/
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
.atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear300_evb_init,
MACHINE_END
* warranty of any kind, whether express or implied.
*/
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
.atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear310_evb_init,
MACHINE_END
* warranty of any kind, whether express or implied.
*/
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
.atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear320_evb_init,
MACHINE_END
* warranty of any kind, whether express or implied.
*/
-#include <asm/hardware/vic.h>
-#include <mach/hardware.h>
-
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =VA_SPEAR6XX_CPU_VIC_PRI_BASE
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status
- mov \irqnr, #0
- teq \irqstat, #0
- bne 1001f
- ldr \base, =VA_SPEAR6XX_CPU_VIC_SEC_BASE
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status
- teq \irqstat, #0
- beq 1002f @ this will set/reset
- @ zero register
- mov \irqnr, #32
-1001:
- /*
- * Following code will find bit position of least significang
- * bit set in irqstat, using following equation
- * least significant bit set in n = (n & ~(n-1))
- */
- sub \tmp, \irqstat, #1 @ tmp = irqstat - 1
- mvn \tmp, \tmp @ tmp = ~tmp
- and \irqstat, \irqstat, \tmp @ irqstat &= tmp
- /* Now, irqstat is = bit no. of 1st bit set in vic irq status */
- clz \tmp, \irqstat @ tmp = leading zeros
-
- rsb \tmp, \tmp, #0x1F @ tmp = 32 - tmp - 1
- add \irqnr, \irqnr, \tmp
-
-1002: /* EQ will be set if no irqs pending */
- .endm
+++ /dev/null
-/*
- * arch/arm/mach-spear6xx/include/mach/vmalloc.h
- *
- * Defining Vmalloc area for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_VMALLOC_H
-#define __MACH_VMALLOC_H
-
-#include <plat/vmalloc.h>
-
-#endif /* __MACH_VMALLOC_H */
* warranty of any kind, whether express or implied.
*/
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
.atag_offset = 0x100,
.map_io = spear6xx_map_io,
.init_irq = spear6xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &spear6xx_timer,
.init_machine = spear600_evb_init,
MACHINE_END
+obj-y += board-pinmux.o
obj-y += common.o
obj-y += devices.o
obj-y += io.o
#include <linux/i2c.h>
#include <linux/i2c-tegra.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
void ventana_pinmux_init(void);
struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("nvidia,tegra20-pinmux", TEGRA_APB_MISC_BASE + 0x14, "tegra-pinmux", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-gpio", TEGRA_GPIO_BASE, "tegra-gpio", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL),
tegra_clk_init_from_table(tegra_dt_clk_init_table);
- /*
- * Finished with the static registrations now; fill in the missing
- * devices
- */
- of_platform_populate(NULL, tegra_dt_match_table,
- tegra20_auxdata_lookup, NULL);
-
for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
if (of_machine_is_compatible(pinmux_configs[i].machine)) {
pinmux_configs[i].init();
WARN(i == ARRAY_SIZE(pinmux_configs),
"Unknown platform! Pinmuxing not initialized\n");
+
+ /*
+ * Finished with the static registrations now; fill in the missing
+ * devices
+ */
+ of_platform_populate(NULL, tegra_dt_match_table,
+ tegra20_auxdata_lookup, NULL);
}
static const char * tegra_dt_board_compat[] = {
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_dt_init,
.dt_compat = tegra_dt_board_compat,
#include <asm/mach-types.h>
-#include <mach/pinmux.h>
#include "board.h"
#include "board-harmony.h"
regulator_enable(regulator);
- tegra_pinmux_set_tristate(TEGRA_PINGROUP_GPV, TEGRA_TRI_NORMAL);
- tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXA, TEGRA_TRI_NORMAL);
- tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXK, TEGRA_TRI_NORMAL);
-
err = tegra_pcie_init(true, true);
if (err)
goto err_pcie;
return 0;
err_pcie:
- tegra_pinmux_set_tristate(TEGRA_PINGROUP_GPV, TEGRA_TRI_TRISTATE);
- tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXA, TEGRA_TRI_TRISTATE);
- tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXK, TEGRA_TRI_TRISTATE);
-
regulator_disable(regulator);
regulator_put(regulator);
err_reg:
#include "gpio-names.h"
#include "board-harmony.h"
-#include "devices.h"
+#include "board-pinmux.h"
static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
-static struct platform_device *pinmux_devices[] = {
- &tegra_gpio_device,
- &tegra_pinmux_device,
-};
-
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
{ .gpio = TEGRA_GPIO_EXT_MIC_EN, .enable = true },
};
+static struct tegra_board_pinmux_conf conf = {
+ .pgs = harmony_pinmux,
+ .pg_count = ARRAY_SIZE(harmony_pinmux),
+ .gpios = gpio_table,
+ .gpio_count = ARRAY_SIZE(gpio_table),
+};
+
void harmony_pinmux_init(void)
{
- if (!of_machine_is_compatible("nvidia,tegra20"))
- platform_add_devices(pinmux_devices,
- ARRAY_SIZE(pinmux_devices));
-
- tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
-
- tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
+ tegra_board_pinmux_init(&conf, NULL);
}
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
#include <asm/setup.h>
#include <mach/tegra_wm8903_pdata.h>
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_harmony_init,
MACHINE_END
#include "gpio-names.h"
#include "board-paz00.h"
-#include "devices.h"
+#include "board-pinmux.h"
static struct tegra_pingroup_config paz00_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_ATC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_ATD, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_ATE, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_CSUS, TEGRA_MUX_PLLC_OUT1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
-static struct platform_device *pinmux_devices[] = {
- &tegra_gpio_device,
- &tegra_pinmux_device,
-};
-
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD1_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
{ .gpio = TEGRA_WIFI_LED, .enable = true },
};
+static struct tegra_board_pinmux_conf conf = {
+ .pgs = paz00_pinmux,
+ .pg_count = ARRAY_SIZE(paz00_pinmux),
+ .gpios = gpio_table,
+ .gpio_count = ARRAY_SIZE(gpio_table),
+};
+
void paz00_pinmux_init(void)
{
- if (!of_machine_is_compatible("nvidia,tegra20"))
- platform_add_devices(pinmux_devices,
- ARRAY_SIZE(pinmux_devices));
-
- tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
-
- tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
+ tegra_board_pinmux_init(&conf, NULL);
}
#include <linux/serial_8250.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio_keys.h>
#include <linux/pda_power.h>
#include <linux/io.h>
+#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/rfkill-gpio.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
},
};
+static struct gpio_keys_button paz00_gpio_keys_buttons[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = TEGRA_GPIO_POWERKEY,
+ .active_low = 1,
+ .desc = "Power",
+ .type = EV_KEY,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data paz00_gpio_keys = {
+ .buttons = paz00_gpio_keys_buttons,
+ .nbuttons = ARRAY_SIZE(paz00_gpio_keys_buttons),
+};
+
+static struct platform_device gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &paz00_gpio_keys,
+ },
+};
+
static struct platform_device *paz00_devices[] __initdata = {
&debug_uart,
&tegra_sdhci_device4,
&tegra_sdhci_device1,
&wifi_rfkill_device,
&leds_gpio,
+ &gpio_keys_device,
};
static void paz00_i2c_init(void)
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_paz00_init,
MACHINE_END
#define TEGRA_WIFI_RST TEGRA_GPIO_PD1
#define TEGRA_WIFI_LED TEGRA_GPIO_PD0
+/* WakeUp */
+#define TEGRA_GPIO_POWERKEY TEGRA_GPIO_PJ7
+
void paz00_pinmux_init(void);
#endif
--- /dev/null
+/*
+ * Copyright (c) 2011, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/string.h>
+
+#include <mach/gpio-tegra.h>
+#include <mach/pinmux.h>
+
+#include "board-pinmux.h"
+#include "devices.h"
+
+struct tegra_board_pinmux_conf *confs[2];
+
+static void tegra_board_pinmux_setup_gpios(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(confs); i++) {
+ if (!confs[i])
+ continue;
+
+ tegra_gpio_config(confs[i]->gpios, confs[i]->gpio_count);
+ }
+}
+
+static void tegra_board_pinmux_setup_pinmux(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(confs); i++) {
+ if (!confs[i])
+ continue;
+
+ tegra_pinmux_config_table(confs[i]->pgs, confs[i]->pg_count);
+
+ if (confs[i]->drives)
+ tegra_drive_pinmux_config_table(confs[i]->drives,
+ confs[i]->drive_count);
+ }
+}
+
+static int tegra_board_pinmux_bus_notify(struct notifier_block *nb,
+ unsigned long event, void *vdev)
+{
+ static bool had_gpio;
+ static bool had_pinmux;
+
+ struct device *dev = vdev;
+ const char *devname;
+
+ if (event != BUS_NOTIFY_BOUND_DRIVER)
+ return NOTIFY_DONE;
+
+ devname = dev_name(dev);
+
+ if (!had_gpio && !strcmp(devname, GPIO_DEV)) {
+ tegra_board_pinmux_setup_gpios();
+ had_gpio = true;
+ } else if (!had_pinmux && !strcmp(devname, PINMUX_DEV)) {
+ tegra_board_pinmux_setup_pinmux();
+ had_pinmux = true;
+ }
+
+ if (had_gpio && had_pinmux)
+ return NOTIFY_STOP_MASK;
+ else
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block nb = {
+ .notifier_call = tegra_board_pinmux_bus_notify,
+};
+
+static struct platform_device *devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
+void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a,
+ struct tegra_board_pinmux_conf *conf_b)
+{
+ confs[0] = conf_a;
+ confs[1] = conf_b;
+
+ bus_register_notifier(&platform_bus_type, &nb);
+
+ if (!of_machine_is_compatible("nvidia,tegra20"))
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
--- /dev/null
+/*
+ * Copyright (c) 2011, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_BOARD_PINMUX_H
+#define __MACH_TEGRA_BOARD_PINMUX_H
+
+#define GPIO_DEV "tegra-gpio"
+#define PINMUX_DEV "tegra-pinmux"
+
+struct tegra_pingroup_config;
+struct tegra_gpio_table;
+
+struct tegra_board_pinmux_conf {
+ struct tegra_pingroup_config *pgs;
+ int pg_count;
+
+ struct tegra_drive_pingroup_config *drives;
+ int drive_count;
+
+ struct tegra_gpio_table *gpios;
+ int gpio_count;
+};
+
+void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a,
+ struct tegra_board_pinmux_conf *conf_b);
+
+#endif
#include <mach/pinmux-t2.h>
#include "gpio-names.h"
+#include "board-pinmux.h"
#include "board-seaboard.h"
-#include "devices.h"
#define DEFAULT_DRIVE(_name) \
{ \
.slew_falling = TEGRA_SLEW_SLOWEST, \
}
-static __initdata struct tegra_drive_pingroup_config seaboard_drive_pinmux[] = {
+static struct tegra_drive_pingroup_config seaboard_drive_pinmux[] = {
DEFAULT_DRIVE(SDIO1),
};
-static __initdata struct tegra_pingroup_config seaboard_pinmux[] = {
+static struct tegra_pingroup_config common_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_ATB, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_ATC, TEGRA_MUX_NAND, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DTA, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DTB, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DTC, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_GMA, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_GMB, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_GMC, TEGRA_MUX_UARTD, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_GMD, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_GME, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_GPU, TEGRA_MUX_PWM, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_GPU7, TEGRA_MUX_RTCK, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_LM0, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_LM1, TEGRA_MUX_CRT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_LPP, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_LPW0, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_LPW1, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_LPW2, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_LSC0, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_LSC1, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_LSCK, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_LSDA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_LSDI, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_LSPI, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_LVP0, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_LVS, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_OWC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_PMC, TEGRA_MUX_PWR_ON, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_PTA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_RM, TEGRA_MUX_I2C, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SDB, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SDC, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SDD, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SLXA, TEGRA_MUX_PCIE, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_SLXC, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SLXD, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_SLXK, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPDI, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIH, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_UAA, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_UAB, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
-static __initdata struct tegra_pingroup_config ventana_pinmux[] = {
- {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+static struct tegra_pingroup_config seaboard_pinmux[] = {
+ {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_GMD, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_LPW0, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_LPW2, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_LSC1, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_LSCK, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_LSDA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_PTA, TEGRA_MUX_HDMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_SLXC, TEGRA_MUX_SPDIF, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_SLXK, TEGRA_MUX_PCIE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
+};
+
+static struct tegra_pingroup_config ventana_pinmux[] = {
{TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_DTA, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_DTB, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_DTC, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_DTD, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_GMD, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_LPW0, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_LPW2, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
};
-static struct platform_device *pinmux_devices[] = {
- &tegra_gpio_device,
- &tegra_pinmux_device,
-};
-
static struct tegra_gpio_table common_gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_POWER, .enable = true },
+ { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true },
+};
+
+static struct tegra_gpio_table seaboard_gpio_table[] = {
{ .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true },
{ .gpio = TEGRA_GPIO_POWERKEY, .enable = true },
{ .gpio = TEGRA_GPIO_HP_DET, .enable = true },
{ .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true },
- { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true },
{ .gpio = TEGRA_GPIO_USB1, .enable = true },
};
-static void __init update_pinmux(struct tegra_pingroup_config *newtbl, int size)
-{
- int i, j;
- struct tegra_pingroup_config *new_pingroup, *base_pingroup;
-
- /* Update base seaboard pinmux table with secondary board
- * specific pinmux table table.
- */
- for (i = 0; i < size; i++) {
- new_pingroup = &newtbl[i];
- for (j = 0; j < ARRAY_SIZE(seaboard_pinmux); j++) {
- base_pingroup = &seaboard_pinmux[j];
- if (new_pingroup->pingroup == base_pingroup->pingroup) {
- *base_pingroup = *new_pingroup;
- break;
- }
- }
- }
-}
-
-void __init seaboard_common_pinmux_init(void)
-{
- if (!of_machine_is_compatible("nvidia,tegra20"))
- platform_add_devices(pinmux_devices,
- ARRAY_SIZE(pinmux_devices));
+static struct tegra_gpio_table ventana_gpio_table[] = {
+ /* hp_det */
+ { .gpio = TEGRA_GPIO_PW2, .enable = true },
+ /* int_mic_en */
+ { .gpio = TEGRA_GPIO_PX0, .enable = true },
+ /* ext_mic_en */
+ { .gpio = TEGRA_GPIO_PX1, .enable = true },
+};
- tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
+static struct tegra_board_pinmux_conf common_conf = {
+ .pgs = common_pinmux,
+ .pg_count = ARRAY_SIZE(common_pinmux),
+ .gpios = common_gpio_table,
+ .gpio_count = ARRAY_SIZE(common_gpio_table),
+};
- tegra_drive_pinmux_config_table(seaboard_drive_pinmux,
- ARRAY_SIZE(seaboard_drive_pinmux));
+static struct tegra_board_pinmux_conf seaboard_conf = {
+ .pgs = seaboard_pinmux,
+ .pg_count = ARRAY_SIZE(seaboard_pinmux),
+ .drives = seaboard_drive_pinmux,
+ .drive_count = ARRAY_SIZE(seaboard_drive_pinmux),
+ .gpios = seaboard_gpio_table,
+ .gpio_count = ARRAY_SIZE(seaboard_gpio_table),
+};
- tegra_gpio_config(common_gpio_table, ARRAY_SIZE(common_gpio_table));
-}
+static struct tegra_board_pinmux_conf ventana_conf = {
+ .pgs = ventana_pinmux,
+ .pg_count = ARRAY_SIZE(ventana_pinmux),
+ .gpios = ventana_gpio_table,
+ .gpio_count = ARRAY_SIZE(ventana_gpio_table),
+};
-void __init seaboard_pinmux_init(void)
+void seaboard_pinmux_init(void)
{
- seaboard_common_pinmux_init();
+ tegra_board_pinmux_init(&common_conf, &seaboard_conf);
}
-void __init ventana_pinmux_init(void)
+void ventana_pinmux_init(void)
{
- update_pinmux(ventana_pinmux, ARRAY_SIZE(ventana_pinmux));
- seaboard_common_pinmux_init();
+ tegra_board_pinmux_init(&common_conf, &ventana_conf);
}
-
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include "board.h"
#include "board-seaboard.h"
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_seaboard_init,
MACHINE_END
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_kaen_init,
MACHINE_END
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_wario_init,
MACHINE_END
#include <mach/pinmux.h>
#include "gpio-names.h"
+#include "board-pinmux.h"
#include "board-trimslice.h"
-#include "devices.h"
-static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
+static struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_ATB, TEGRA_MUX_SDIO4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_ATC, TEGRA_MUX_NAND, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_LVS, TEGRA_MUX_DISPLAYA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_OWC, TEGRA_MUX_RSVD2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_PMC, TEGRA_MUX_PWR_ON, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_PTA, TEGRA_MUX_RSVD3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_PTA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_RM, TEGRA_MUX_I2C, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SDB, TEGRA_MUX_PWM, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SDC, TEGRA_MUX_PWM, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
-static struct platform_device *pinmux_devices[] = {
- &tegra_gpio_device,
- &tegra_pinmux_device,
-};
-
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */
{ .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */
{ .gpio = TRIMSLICE_GPIO_USB2_RST, .enable = true }, /* USB2 PHY rst */
};
-void __init trimslice_pinmux_init(void)
+static struct tegra_board_pinmux_conf conf = {
+ .pgs = trimslice_pinmux,
+ .pg_count = ARRAY_SIZE(trimslice_pinmux),
+ .gpios = gpio_table,
+ .gpio_count = ARRAY_SIZE(gpio_table),
+};
+
+void trimslice_pinmux_init(void)
{
- if (!of_machine_is_compatible("nvidia,tegra20"))
- platform_add_devices(pinmux_devices,
- ARRAY_SIZE(pinmux_devices));
- tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
- tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
+ tegra_board_pinmux_init(&conf, NULL);
}
#include <linux/i2c.h>
#include <linux/gpio.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_trimslice_init,
MACHINE_END
* GNU General Public License for more details.
*
*/
-#include <mach/iomap.h>
-#include <mach/io.h>
-
-#if defined(CONFIG_ARM_GIC)
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
- /* Uses the GIC interrupt controller built into the cpu */
-#define ICTRL_BASE (IO_CPU_VIRT + 0x100)
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- movw \base, #(ICTRL_BASE & 0x0000ffff)
- movt \base, #((ICTRL_BASE & 0xffff0000) >> 16)
+ .macro arch_ret_to_user, tmp1, tmp2
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-#else
+#if !defined(CONFIG_ARM_GIC)
/* legacy interrupt controller for AP16 */
- .macro disable_fiq
- .endm
.macro get_irqnr_preamble, base, tmp
@ enable imprecise aborts
orr \base, #0x0000f000
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #0x20] @ EVT_IRQ_STS
cmp \irqnr, #0x80
#ifndef __ASSEMBLER__
-#define __arch_ioremap tegra_ioremap
-#define __arch_iounmap tegra_iounmap
-
-void __iomem *tegra_ioremap(unsigned long phys, size_t size, unsigned int type);
-void tegra_iounmap(volatile void __iomem *addr);
-
#define IO_ADDRESS(n) (IO_TO_VIRT(n))
#ifdef CONFIG_TEGRA_PCI
+++ /dev/null
-/*
- * arch/arm/mach-tegra/include/mach/vmalloc.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_VMALLOC_H
-#define __MACH_TEGRA_VMALLOC_H
-
-#include <asm/sizes.h>
-
-#define VMALLOC_END 0xFE000000UL
-
-#endif
{
iotable_init(tegra_io_desc, ARRAY_SIZE(tegra_io_desc));
}
-
-/*
- * Intercept ioremap() requests for addresses in our fixed mapping regions.
- */
-void __iomem *tegra_ioremap(unsigned long p, size_t size, unsigned int type)
-{
- void __iomem *v = IO_ADDRESS(p);
- if (v == NULL)
- v = __arm_ioremap(p, size, type);
- return v;
-}
-EXPORT_SYMBOL(tegra_ioremap);
-
-void tegra_iounmap(volatile void __iomem *addr)
-{
- unsigned long virt = (unsigned long)addr;
-
- if (virt >= VMALLOC_START && virt < VMALLOC_END)
- __iounmap(addr);
-}
-EXPORT_SYMBOL(tegra_iounmap);
#include <asm/sizes.h>
#include <asm/mach/pci.h>
-#include <mach/pinmux.h>
#include <mach/iomap.h>
#include <mach/clk.h>
#include <mach/powergate.h>
* Low-level IRQ helper macros for ST-Ericsson U300
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
-#include <mach/hardware.h>
-#include <asm/hardware/vic.h>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
- mov \irqnr, #0
- teq \irqstat, #0
- bne 1002f
-1001: ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
- mov \irqnr, #32
- teq \irqstat, #0
- beq 1003f
-1002: tst \irqstat, #1
- bne 1003f
- add \irqnr, \irqnr, #1
- movs \irqstat, \irqstat, lsr #1
- bne 1002b
-1003: /* EQ will be set if no irqs pending */
- .endm
case 's':
case 'h':
printk(KERN_CRIT "RESET: shutting down/rebooting system\n");
- /* Disable interrupts */
- local_irq_disable();
#ifdef CONFIG_COH901327_WATCHDOG
coh901327_watchdog_reset();
#endif
+++ /dev/null
-/*
- *
- * arch/arm/mach-u300/include/mach/vmalloc.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Virtual memory allocations
- * End must be above the I/O registers and on an even 2MiB boundary.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#define VMALLOC_END 0xfe800000UL
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/platform.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/memory.h>
.atag_offset = BOOT_PARAMS_OFFSET,
.map_io = u300_map_io,
.init_irq = u300_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &u300_timer,
.init_machine = u300_init_machine,
MACHINE_END
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <plat/i2c.h>
#include <plat/ste_dma40.h>
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
.timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = mop500_init_machine,
MACHINE_END
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = hrefv60_init_machine,
MACHINE_END
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
.timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = snowball_init_machine,
MACHINE_END
#include <linux/i2c.h>
#include <linux/mfd/ab5500/ab5500.h>
+#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
.map_io = u5500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = u5500_init_machine,
MACHINE_END
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
+++ /dev/null
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xf0000000UL
},
#ifdef CONFIG_MACH_VERSATILE_AB
{
- .virtual = IO_ADDRESS(VERSATILE_GPIO0_BASE),
- .pfn = __phys_to_pfn(VERSATILE_GPIO0_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
.virtual = IO_ADDRESS(VERSATILE_IB2_BASE),
.pfn = __phys_to_pfn(VERSATILE_IB2_BASE),
.length = SZ_64M,
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/hardware/vic.h>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IO_ADDRESS(VERSATILE_VIC_BASE)
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
- mov \irqnr, #0
- teq \irqstat, #0
- beq 1003f
-
-1001: tst \irqstat, #15
- bne 1002f
- add \irqnr, \irqnr, #4
- movs \irqstat, \irqstat, lsr #4
- bne 1001b
-1002: tst \irqstat, #1
- bne 1003f
- add \irqnr, \irqnr, #1
- movs \irqstat, \irqstat, lsr #1
- bne 1002b
-1003: /* EQ will be set if no irqs pending */
-
-@ clz \irqnr, \irqstat
-@1003: /* EQ will be set if we reach MAXIRQNUM */
- .endm
-
+++ /dev/null
-/*
- * arch/arm/mach-versatile/include/mach/vmalloc.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xd8000000UL
#include <mach/hardware.h>
#include <asm/irq.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &versatile_timer,
.init_machine = versatile_init,
MACHINE_END
#include <linux/init.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &versatile_timer,
.init_machine = versatile_dt_init,
.dt_compat = versatile_dt_match,
#include <linux/io.h>
#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &versatile_timer,
.init_machine = versatile_pb_init,
MACHINE_END
-#include <asm/hardware/entry-macro-gic.S>
-
.macro disable_fiq
.endm
+++ /dev/null
-/*
- * arch/arm/mach-vexpress/include/mach/vmalloc.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xf8000000UL
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/timer-sp.h>
#include <asm/hardware/sp810.h>
+#include <asm/hardware/gic.h>
#include <mach/ct-ca9x4.h>
#include <mach/motherboard.h>
.init_early = v2m_init_early,
.init_irq = v2m_init_irq,
.timer = &v2m_timer,
+ .handle_irq = gic_handle_irq,
.init_machine = v2m_init,
MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-vt8500/include/mach/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END 0xd0000000UL
{
if (mode == 's') {
/* Jump into ROM at address 0 */
- cpu_reset(0);
+ soft_restart(0);
} else {
__raw_writel(WTE | WTRE | WTCLK, WTCR);
}
+++ /dev/null
-/*
- * arch/arm/mach-w90x900/include/mach/vmalloc.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END (0xe0000000UL)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
#include <mach/hardware.h>
#include <mach/regs-irq.h>
+#include "nuc9xx.h"
+
struct group_irq {
unsigned long gpen;
unsigned int enabled;
* published by the Free Software Foundation.
*
*/
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+#include "nuc9xx.h"
/* extern file from nuc910.c */
* published by the Free Software Foundation.
*
*/
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+#include "nuc9xx.h"
/* extern file from nuc950.c */
* published by the Free Software Foundation.
*
*/
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+#include "nuc9xx.h"
/* extern file from nuc960.c */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/nuc9xx.h
+ *
+ * Copied from nuc910.h, which had:
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
#include <mach/map.h>
#include <mach/regs-timer.h>
+#include "nuc9xx.h"
+
#define RESETINT 0x1f
#define PERIOD (0x01 << 27)
#define ONESHOT (0x00 << 27)
MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
.map_io = xilinx_map_io,
.init_irq = xilinx_irq_init,
+ .handle_irq = gic_handle_irq,
.init_machine = xilinx_init_machine,
.timer = &xttcpss_sys_timer,
.dt_compat = xilinx_dt_match,
* GNU General Public License for more details.
*/
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-gic.S>
-
.macro disable_fiq
.endm
+++ /dev/null
-/* arch/arm/mach-zynq/include/mach/vmalloc.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_VMALLOC_H__
-#define __MACH_VMALLOC_H__
-
-#define VMALLOC_END 0xE0000000UL
-
-#endif
comment "Processor Features"
+config ARM_LPAE
+ bool "Support for the Large Physical Address Extension"
+ depends on MMU && CPU_V7
+ help
+ Say Y if you have an ARMv7 processor supporting the LPAE page
+ table format and you would like to access memory beyond the
+ 4GB limit. The resulting kernel image will not run on
+ processors without the LPA extension.
+
+ If unsure, say N.
+
+config ARCH_PHYS_ADDR_T_64BIT
+ def_bool ARM_LPAE
+
+config ARCH_DMA_ADDR_T_64BIT
+ bool
+
config ARM_THUMB
bool "Support Thumb user binaries"
depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON
ai_usermode = safe_usermode(ai_usermode, false);
}
- hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
+ hook_fault_code(FAULT_CODE_ALIGNMENT, do_alignment, SIGBUS, BUS_ADRALN,
"alignment exception");
/*
DEFINE_PER_CPU(struct mm_struct *, current_mm);
#endif
+#ifdef CONFIG_ARM_LPAE
+#define cpu_set_asid(asid) { \
+ unsigned long ttbl, ttbh; \
+ asm volatile( \
+ " mrrc p15, 0, %0, %1, c2 @ read TTBR0\n" \
+ " mov %1, %2, lsl #(48 - 32) @ set ASID\n" \
+ " mcrr p15, 0, %0, %1, c2 @ set TTBR0\n" \
+ : "=&r" (ttbl), "=&r" (ttbh) \
+ : "r" (asid & ~ASID_MASK)); \
+}
+#else
+#define cpu_set_asid(asid) \
+ asm(" mcr p15, 0, %0, c13, c0, 1\n" : : "r" (asid))
+#endif
+
/*
* We fork()ed a process, and we need a new context for the child
* to run in. We reserve version 0 for initial tasks so we will
static void flush_context(void)
{
/* set the reserved ASID before flushing the TLB */
- asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0));
+ cpu_set_asid(0);
isb();
local_flush_tlb_all();
if (icache_is_vivt_asid_tagged()) {
set_mm_context(mm, asid);
/* set the new ASID */
- asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (mm->context.id));
+ cpu_set_asid(mm->context.id);
isb();
}
#include "fault.h"
-/*
- * Fault status register encodings. We steal bit 31 for our own purposes.
- */
-#define FSR_LNX_PF (1 << 31)
-#define FSR_WRITE (1 << 11)
-#define FSR_FS4 (1 << 10)
-#define FSR_FS3_0 (15)
-
-static inline int fsr_fs(unsigned int fsr)
-{
- return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
-}
-
#ifdef CONFIG_MMU
#ifdef CONFIG_KPROBES
pte = pte_offset_map(pmd, addr);
printk(", *pte=%08llx", (long long)pte_val(*pte));
+#ifndef CONFIG_ARM_LPAE
printk(", *ppte=%08llx",
(long long)pte_val(pte[PTE_HWTABLE_PTRS]));
+#endif
pte_unmap(pte);
} while(0);
pmd = pmd_offset(pud, addr);
pmd_k = pmd_offset(pud_k, addr);
+#ifdef CONFIG_ARM_LPAE
+ /*
+ * Only one hardware entry per PMD with LPAE.
+ */
+ index = 0;
+#else
/*
* On ARM one Linux PGD entry contains two hardware entries (see page
* tables layout in pgtable.h). We normally guarantee that we always
* for the first of pair.
*/
index = (addr >> SECTION_SHIFT) & 1;
+#endif
if (pmd_none(pmd_k[index]))
goto bad_area;
return 1;
}
-static struct fsr_info {
+struct fsr_info {
int (*fn)(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
int sig;
int code;
const char *name;
-} fsr_info[] = {
- /*
- * The following are the standard ARMv3 and ARMv4 aborts. ARMv5
- * defines these to be "precise" aborts.
- */
- { do_bad, SIGSEGV, 0, "vector exception" },
- { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" },
- { do_bad, SIGKILL, 0, "terminal exception" },
- { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" },
- { do_bad, SIGBUS, 0, "external abort on linefetch" },
- { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" },
- { do_bad, SIGBUS, 0, "external abort on linefetch" },
- { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" },
- { do_bad, SIGBUS, 0, "external abort on non-linefetch" },
- { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" },
- { do_bad, SIGBUS, 0, "external abort on non-linefetch" },
- { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" },
- { do_bad, SIGBUS, 0, "external abort on translation" },
- { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" },
- { do_bad, SIGBUS, 0, "external abort on translation" },
- { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" },
- /*
- * The following are "imprecise" aborts, which are signalled by bit
- * 10 of the FSR, and may not be recoverable. These are only
- * supported if the CPU abort handler supports bit 10.
- */
- { do_bad, SIGBUS, 0, "unknown 16" },
- { do_bad, SIGBUS, 0, "unknown 17" },
- { do_bad, SIGBUS, 0, "unknown 18" },
- { do_bad, SIGBUS, 0, "unknown 19" },
- { do_bad, SIGBUS, 0, "lock abort" }, /* xscale */
- { do_bad, SIGBUS, 0, "unknown 21" },
- { do_bad, SIGBUS, BUS_OBJERR, "imprecise external abort" }, /* xscale */
- { do_bad, SIGBUS, 0, "unknown 23" },
- { do_bad, SIGBUS, 0, "dcache parity error" }, /* xscale */
- { do_bad, SIGBUS, 0, "unknown 25" },
- { do_bad, SIGBUS, 0, "unknown 26" },
- { do_bad, SIGBUS, 0, "unknown 27" },
- { do_bad, SIGBUS, 0, "unknown 28" },
- { do_bad, SIGBUS, 0, "unknown 29" },
- { do_bad, SIGBUS, 0, "unknown 30" },
- { do_bad, SIGBUS, 0, "unknown 31" }
};
+/* FSR definition */
+#ifdef CONFIG_ARM_LPAE
+#include "fsr-3level.c"
+#else
+#include "fsr-2level.c"
+#endif
+
void __init
hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
int sig, int code, const char *name)
arm_notify_die("", regs, &info, fsr, 0);
}
-
-static struct fsr_info ifsr_info[] = {
- { do_bad, SIGBUS, 0, "unknown 0" },
- { do_bad, SIGBUS, 0, "unknown 1" },
- { do_bad, SIGBUS, 0, "debug event" },
- { do_bad, SIGSEGV, SEGV_ACCERR, "section access flag fault" },
- { do_bad, SIGBUS, 0, "unknown 4" },
- { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" },
- { do_bad, SIGSEGV, SEGV_ACCERR, "page access flag fault" },
- { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" },
- { do_bad, SIGBUS, 0, "external abort on non-linefetch" },
- { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" },
- { do_bad, SIGBUS, 0, "unknown 10" },
- { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" },
- { do_bad, SIGBUS, 0, "external abort on translation" },
- { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" },
- { do_bad, SIGBUS, 0, "external abort on translation" },
- { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" },
- { do_bad, SIGBUS, 0, "unknown 16" },
- { do_bad, SIGBUS, 0, "unknown 17" },
- { do_bad, SIGBUS, 0, "unknown 18" },
- { do_bad, SIGBUS, 0, "unknown 19" },
- { do_bad, SIGBUS, 0, "unknown 20" },
- { do_bad, SIGBUS, 0, "unknown 21" },
- { do_bad, SIGBUS, 0, "unknown 22" },
- { do_bad, SIGBUS, 0, "unknown 23" },
- { do_bad, SIGBUS, 0, "unknown 24" },
- { do_bad, SIGBUS, 0, "unknown 25" },
- { do_bad, SIGBUS, 0, "unknown 26" },
- { do_bad, SIGBUS, 0, "unknown 27" },
- { do_bad, SIGBUS, 0, "unknown 28" },
- { do_bad, SIGBUS, 0, "unknown 29" },
- { do_bad, SIGBUS, 0, "unknown 30" },
- { do_bad, SIGBUS, 0, "unknown 31" },
-};
-
void __init
hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
int sig, int code, const char *name)
arm_notify_die("", regs, &info, ifsr, 0);
}
+#ifndef CONFIG_ARM_LPAE
static int __init exceptions_init(void)
{
if (cpu_architecture() >= CPU_ARCH_ARMv6) {
}
arch_initcall(exceptions_init);
+#endif
-void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
+#ifndef __ARCH_ARM_FAULT_H
+#define __ARCH_ARM_FAULT_H
+
+/*
+ * Fault status register encodings. We steal bit 31 for our own purposes.
+ */
+#define FSR_LNX_PF (1 << 31)
+#define FSR_WRITE (1 << 11)
+#define FSR_FS4 (1 << 10)
+#define FSR_FS3_0 (15)
+#define FSR_FS5_0 (0x3f)
+
+#ifdef CONFIG_ARM_LPAE
+static inline int fsr_fs(unsigned int fsr)
+{
+ return fsr & FSR_FS5_0;
+}
+#else
+static inline int fsr_fs(unsigned int fsr)
+{
+ return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
+}
+#endif
+void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
unsigned long search_exception_table(unsigned long addr);
+
+#endif /* __ARCH_ARM_FAULT_H */
--- /dev/null
+static struct fsr_info fsr_info[] = {
+ /*
+ * The following are the standard ARMv3 and ARMv4 aborts. ARMv5
+ * defines these to be "precise" aborts.
+ */
+ { do_bad, SIGSEGV, 0, "vector exception" },
+ { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" },
+ { do_bad, SIGKILL, 0, "terminal exception" },
+ { do_bad, SIGBUS, BUS_ADRALN, "alignment exception" },
+ { do_bad, SIGBUS, 0, "external abort on linefetch" },
+ { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" },
+ { do_bad, SIGBUS, 0, "external abort on linefetch" },
+ { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" },
+ { do_bad, SIGBUS, 0, "external abort on non-linefetch" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" },
+ { do_bad, SIGBUS, 0, "external abort on non-linefetch" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" },
+ { do_bad, SIGBUS, 0, "external abort on translation" },
+ { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" },
+ { do_bad, SIGBUS, 0, "external abort on translation" },
+ { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" },
+ /*
+ * The following are "imprecise" aborts, which are signalled by bit
+ * 10 of the FSR, and may not be recoverable. These are only
+ * supported if the CPU abort handler supports bit 10.
+ */
+ { do_bad, SIGBUS, 0, "unknown 16" },
+ { do_bad, SIGBUS, 0, "unknown 17" },
+ { do_bad, SIGBUS, 0, "unknown 18" },
+ { do_bad, SIGBUS, 0, "unknown 19" },
+ { do_bad, SIGBUS, 0, "lock abort" }, /* xscale */
+ { do_bad, SIGBUS, 0, "unknown 21" },
+ { do_bad, SIGBUS, BUS_OBJERR, "imprecise external abort" }, /* xscale */
+ { do_bad, SIGBUS, 0, "unknown 23" },
+ { do_bad, SIGBUS, 0, "dcache parity error" }, /* xscale */
+ { do_bad, SIGBUS, 0, "unknown 25" },
+ { do_bad, SIGBUS, 0, "unknown 26" },
+ { do_bad, SIGBUS, 0, "unknown 27" },
+ { do_bad, SIGBUS, 0, "unknown 28" },
+ { do_bad, SIGBUS, 0, "unknown 29" },
+ { do_bad, SIGBUS, 0, "unknown 30" },
+ { do_bad, SIGBUS, 0, "unknown 31" },
+};
+
+static struct fsr_info ifsr_info[] = {
+ { do_bad, SIGBUS, 0, "unknown 0" },
+ { do_bad, SIGBUS, 0, "unknown 1" },
+ { do_bad, SIGBUS, 0, "debug event" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "section access flag fault" },
+ { do_bad, SIGBUS, 0, "unknown 4" },
+ { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "page access flag fault" },
+ { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" },
+ { do_bad, SIGBUS, 0, "external abort on non-linefetch" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" },
+ { do_bad, SIGBUS, 0, "unknown 10" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" },
+ { do_bad, SIGBUS, 0, "external abort on translation" },
+ { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" },
+ { do_bad, SIGBUS, 0, "external abort on translation" },
+ { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" },
+ { do_bad, SIGBUS, 0, "unknown 16" },
+ { do_bad, SIGBUS, 0, "unknown 17" },
+ { do_bad, SIGBUS, 0, "unknown 18" },
+ { do_bad, SIGBUS, 0, "unknown 19" },
+ { do_bad, SIGBUS, 0, "unknown 20" },
+ { do_bad, SIGBUS, 0, "unknown 21" },
+ { do_bad, SIGBUS, 0, "unknown 22" },
+ { do_bad, SIGBUS, 0, "unknown 23" },
+ { do_bad, SIGBUS, 0, "unknown 24" },
+ { do_bad, SIGBUS, 0, "unknown 25" },
+ { do_bad, SIGBUS, 0, "unknown 26" },
+ { do_bad, SIGBUS, 0, "unknown 27" },
+ { do_bad, SIGBUS, 0, "unknown 28" },
+ { do_bad, SIGBUS, 0, "unknown 29" },
+ { do_bad, SIGBUS, 0, "unknown 30" },
+ { do_bad, SIGBUS, 0, "unknown 31" },
+};
--- /dev/null
+static struct fsr_info fsr_info[] = {
+ { do_bad, SIGBUS, 0, "unknown 0" },
+ { do_bad, SIGBUS, 0, "unknown 1" },
+ { do_bad, SIGBUS, 0, "unknown 2" },
+ { do_bad, SIGBUS, 0, "unknown 3" },
+ { do_bad, SIGBUS, 0, "reserved translation fault" },
+ { do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 1 translation fault" },
+ { do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 2 translation fault" },
+ { do_page_fault, SIGSEGV, SEGV_MAPERR, "level 3 translation fault" },
+ { do_bad, SIGBUS, 0, "reserved access flag fault" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "level 1 access flag fault" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "level 2 access flag fault" },
+ { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 access flag fault" },
+ { do_bad, SIGBUS, 0, "reserved permission fault" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "level 1 permission fault" },
+ { do_sect_fault, SIGSEGV, SEGV_ACCERR, "level 2 permission fault" },
+ { do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 permission fault" },
+ { do_bad, SIGBUS, 0, "synchronous external abort" },
+ { do_bad, SIGBUS, 0, "asynchronous external abort" },
+ { do_bad, SIGBUS, 0, "unknown 18" },
+ { do_bad, SIGBUS, 0, "unknown 19" },
+ { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous parity error" },
+ { do_bad, SIGBUS, 0, "asynchronous parity error" },
+ { do_bad, SIGBUS, 0, "unknown 26" },
+ { do_bad, SIGBUS, 0, "unknown 27" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
+ { do_bad, SIGBUS, 0, "unknown 32" },
+ { do_bad, SIGBUS, BUS_ADRALN, "alignment fault" },
+ { do_bad, SIGBUS, 0, "debug event" },
+ { do_bad, SIGBUS, 0, "unknown 35" },
+ { do_bad, SIGBUS, 0, "unknown 36" },
+ { do_bad, SIGBUS, 0, "unknown 37" },
+ { do_bad, SIGBUS, 0, "unknown 38" },
+ { do_bad, SIGBUS, 0, "unknown 39" },
+ { do_bad, SIGBUS, 0, "unknown 40" },
+ { do_bad, SIGBUS, 0, "unknown 41" },
+ { do_bad, SIGBUS, 0, "unknown 42" },
+ { do_bad, SIGBUS, 0, "unknown 43" },
+ { do_bad, SIGBUS, 0, "unknown 44" },
+ { do_bad, SIGBUS, 0, "unknown 45" },
+ { do_bad, SIGBUS, 0, "unknown 46" },
+ { do_bad, SIGBUS, 0, "unknown 47" },
+ { do_bad, SIGBUS, 0, "unknown 48" },
+ { do_bad, SIGBUS, 0, "unknown 49" },
+ { do_bad, SIGBUS, 0, "unknown 50" },
+ { do_bad, SIGBUS, 0, "unknown 51" },
+ { do_bad, SIGBUS, 0, "implementation fault (lockdown abort)" },
+ { do_bad, SIGBUS, 0, "unknown 53" },
+ { do_bad, SIGBUS, 0, "unknown 54" },
+ { do_bad, SIGBUS, 0, "unknown 55" },
+ { do_bad, SIGBUS, 0, "unknown 56" },
+ { do_bad, SIGBUS, 0, "unknown 57" },
+ { do_bad, SIGBUS, 0, "implementation fault (coprocessor abort)" },
+ { do_bad, SIGBUS, 0, "unknown 59" },
+ { do_bad, SIGBUS, 0, "unknown 60" },
+ { do_bad, SIGBUS, 0, "unknown 61" },
+ { do_bad, SIGBUS, 0, "unknown 62" },
+ { do_bad, SIGBUS, 0, "unknown 63" },
+};
+
+#define ifsr_info fsr_info
#include <linux/kernel.h>
#include <asm/cputype.h>
+#include <asm/idmap.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
+#include <asm/sections.h>
+pgd_t *idmap_pgd;
+
+#ifdef CONFIG_ARM_LPAE
+static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
+ unsigned long prot)
+{
+ pmd_t *pmd;
+ unsigned long next;
+
+ if (pud_none_or_clear_bad(pud) || (pud_val(*pud) & L_PGD_SWAPPER)) {
+ pmd = pmd_alloc_one(&init_mm, addr);
+ if (!pmd) {
+ pr_warning("Failed to allocate identity pmd.\n");
+ return;
+ }
+ pud_populate(&init_mm, pud, pmd);
+ pmd += pmd_index(addr);
+ } else
+ pmd = pmd_offset(pud, addr);
+
+ do {
+ next = pmd_addr_end(addr, end);
+ *pmd = __pmd((addr & PMD_MASK) | prot);
+ flush_pmd_entry(pmd);
+ } while (pmd++, addr = next, addr != end);
+}
+#else /* !CONFIG_ARM_LPAE */
static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
unsigned long prot)
{
pmd[1] = __pmd(addr);
flush_pmd_entry(pmd);
}
+#endif /* CONFIG_ARM_LPAE */
static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
unsigned long prot)
} while (pud++, addr = next, addr != end);
}
-void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
+static void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
{
unsigned long prot, next;
- prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE;
+ prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
prot |= PMD_BIT4;
} while (pgd++, addr = next, addr != end);
}
-#ifdef CONFIG_SMP
-static void idmap_del_pmd(pud_t *pud, unsigned long addr, unsigned long end)
-{
- pmd_t *pmd = pmd_offset(pud, addr);
- pmd_clear(pmd);
-}
+extern char __idmap_text_start[], __idmap_text_end[];
-static void idmap_del_pud(pgd_t *pgd, unsigned long addr, unsigned long end)
+static int __init init_static_idmap(void)
{
- pud_t *pud = pud_offset(pgd, addr);
- unsigned long next;
+ phys_addr_t idmap_start, idmap_end;
- do {
- next = pud_addr_end(addr, end);
- idmap_del_pmd(pud, addr, next);
- } while (pud++, addr = next, addr != end);
-}
+ idmap_pgd = pgd_alloc(&init_mm);
+ if (!idmap_pgd)
+ return -ENOMEM;
-void identity_mapping_del(pgd_t *pgd, unsigned long addr, unsigned long end)
-{
- unsigned long next;
+ /* Add an identity mapping for the physical address of the section. */
+ idmap_start = virt_to_phys((void *)__idmap_text_start);
+ idmap_end = virt_to_phys((void *)__idmap_text_end);
- pgd += pgd_index(addr);
- do {
- next = pgd_addr_end(addr, end);
- idmap_del_pud(pgd, addr, next);
- } while (pgd++, addr = next, addr != end);
+ pr_info("Setting up static identity map for 0x%llx - 0x%llx\n",
+ (long long)idmap_start, (long long)idmap_end);
+ identity_mapping_add(idmap_pgd, idmap_start, idmap_end);
+
+ return 0;
}
-#endif
+early_initcall(init_static_idmap);
/*
- * In order to soft-boot, we need to insert a 1:1 mapping in place of
- * the user-mode pages. This will then ensure that we have predictable
- * results when turning the mmu off
+ * In order to soft-boot, we need to switch to a 1:1 mapping for the
+ * cpu_reset functions. This will then ensure that we have predictable
+ * results when turning off the mmu.
*/
-void setup_mm_for_reboot(char mode)
+void setup_mm_for_reboot(void)
{
- /*
- * We need to access to user-mode page tables here. For kernel threads
- * we don't have any user-mode mappings so we use the context that we
- * "borrowed".
- */
- identity_mapping_add(current->active_mm->pgd, 0, TASK_SIZE);
+ /* Clean and invalidate L1. */
+ flush_cache_all();
+
+ /* Switch to the identity mapping. */
+ cpu_switch_mm(idmap_pgd, &init_mm);
+
+ /* Flush the TLB. */
local_flush_tlb_all();
}
#include <linux/highmem.h>
#include <linux/gfp.h>
#include <linux/memblock.h>
-#include <linux/sort.h>
#include <asm/mach-types.h>
#include <asm/prom.h>
}
static void __init find_limits(unsigned long *min, unsigned long *max_low,
- unsigned long *max_high)
+ unsigned long *max_high)
{
struct meminfo *mi = &meminfo;
int i;
- *min = -1UL;
- *max_low = *max_high = 0;
-
- for_each_bank (i, mi) {
- struct membank *bank = &mi->bank[i];
- unsigned long start, end;
-
- start = bank_pfn_start(bank);
- end = bank_pfn_end(bank);
-
- if (*min > start)
- *min = start;
- if (*max_high < end)
- *max_high = end;
- if (bank->highmem)
- continue;
- if (*max_low < end)
- *max_low = end;
- }
+ /* This assumes the meminfo array is properly sorted */
+ *min = bank_pfn_start(&mi->bank[0]);
+ for_each_bank (i, mi)
+ if (mi->bank[i].highmem)
+ break;
+ *max_low = bank_pfn_end(&mi->bank[i - 1]);
+ *max_high = bank_pfn_end(&mi->bank[mi->nr_banks - 1]);
}
static void __init arm_bootmem_init(unsigned long start_pfn,
}
#endif
-static int __init meminfo_cmp(const void *_a, const void *_b)
-{
- const struct membank *a = _a, *b = _b;
- long cmp = bank_pfn_start(a) - bank_pfn_start(b);
- return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
-}
-
void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
{
int i;
- sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
-
memblock_init();
for (i = 0; i < mi->nr_banks; i++)
memblock_add(mi->bank[i].start, mi->bank[i].size);
*/
arm_bootmem_free(min, max_low, max_high);
- high_memory = __va(((phys_addr_t)max_low << PAGE_SHIFT) - 1) + 1;
-
/*
* This doesn't seem to be used by the Linux memory manager any
* more, but is used by ll_rw_block. If we can get rid of it, we
#include <asm/mach/map.h>
#include "mm.h"
-/*
- * Used by ioremap() and iounmap() code to mark (super)section-mapped
- * I/O regions in vm_struct->flags field.
- */
-#define VM_ARM_SECTION_MAPPING 0x80000000
-
int ioremap_page(unsigned long virt, unsigned long phys,
const struct mem_type *mtype)
{
} while (seq != init_mm.context.kvm_seq);
}
-#ifndef CONFIG_SMP
+#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
/*
* Section support is unsafe on SMP - If you iounmap and ioremap a region,
* the other CPUs will not see this change until their next context switch.
{
unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1));
pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmdp;
flush_cache_vunmap(addr, end);
pgd = pgd_offset_k(addr);
+ pud = pud_offset(pgd, addr);
+ pmdp = pmd_offset(pud, addr);
do {
- pmd_t pmd, *pmdp = pmd_offset(pgd, addr);
+ pmd_t pmd = *pmdp;
- pmd = *pmdp;
if (!pmd_none(pmd)) {
/*
* Clear the PMD from the page table, and
pte_free_kernel(&init_mm, pmd_page_vaddr(pmd));
}
- addr += PGDIR_SIZE;
- pgd++;
+ addr += PMD_SIZE;
+ pmdp += 2;
} while (addr < end);
/*
{
unsigned long addr = virt, end = virt + size;
pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
/*
* Remove and free any PTE-based mapping, and
unmap_area_sections(virt, size);
pgd = pgd_offset_k(addr);
+ pud = pud_offset(pgd, addr);
+ pmd = pmd_offset(pud, addr);
do {
- pmd_t *pmd = pmd_offset(pgd, addr);
-
pmd[0] = __pmd(__pfn_to_phys(pfn) | type->prot_sect);
pfn += SZ_1M >> PAGE_SHIFT;
pmd[1] = __pmd(__pfn_to_phys(pfn) | type->prot_sect);
pfn += SZ_1M >> PAGE_SHIFT;
flush_pmd_entry(pmd);
- addr += PGDIR_SIZE;
- pgd++;
+ addr += PMD_SIZE;
+ pmd += 2;
} while (addr < end);
return 0;
{
unsigned long addr = virt, end = virt + size;
pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
/*
* Remove and free any PTE-based mapping, and
unmap_area_sections(virt, size);
pgd = pgd_offset_k(virt);
+ pud = pud_offset(pgd, addr);
+ pmd = pmd_offset(pud, addr);
do {
unsigned long super_pmd_val, i;
super_pmd_val |= ((pfn >> (32 - PAGE_SHIFT)) & 0xf) << 20;
for (i = 0; i < 8; i++) {
- pmd_t *pmd = pmd_offset(pgd, addr);
-
pmd[0] = __pmd(super_pmd_val);
pmd[1] = __pmd(super_pmd_val);
flush_pmd_entry(pmd);
- addr += PGDIR_SIZE;
- pgd++;
+ addr += PMD_SIZE;
+ pmd += 2;
}
pfn += SUPERSECTION_SIZE >> PAGE_SHIFT;
unsigned long addr;
struct vm_struct * area;
+#ifndef CONFIG_ARM_LPAE
/*
* High mappings must be supersection aligned
*/
if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
return NULL;
-
- /*
- * Don't allow RAM to be mapped - this causes problems with ARMv6+
- */
- if (WARN_ON(pfn_valid(pfn)))
- return NULL;
+#endif
type = get_mem_type(mtype);
if (!type)
*/
size = PAGE_ALIGN(offset + size);
+ /*
+ * Try to reuse one of the static mapping whenever possible.
+ */
+ read_lock(&vmlist_lock);
+ for (area = vmlist; area; area = area->next) {
+ if (!size || (sizeof(phys_addr_t) == 4 && pfn >= 0x100000))
+ break;
+ if (!(area->flags & VM_ARM_STATIC_MAPPING))
+ continue;
+ if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
+ continue;
+ if (__phys_to_pfn(area->phys_addr) > pfn ||
+ __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1)
+ continue;
+ /* we can drop the lock here as we know *area is static */
+ read_unlock(&vmlist_lock);
+ addr = (unsigned long)area->addr;
+ addr += __pfn_to_phys(pfn) - area->phys_addr;
+ return (void __iomem *) (offset + addr);
+ }
+ read_unlock(&vmlist_lock);
+
+ /*
+ * Don't allow RAM to be mapped - this causes problems with ARMv6+
+ */
+ if (WARN_ON(pfn_valid(pfn)))
+ return NULL;
+
area = get_vm_area_caller(size, VM_IOREMAP, caller);
if (!area)
return NULL;
addr = (unsigned long)area->addr;
-#ifndef CONFIG_SMP
+#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
if (DOMAIN_IO == 0 &&
(((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) ||
cpu_is_xsc3()) && pfn >= 0x100000 &&
void __iounmap(volatile void __iomem *io_addr)
{
void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
-#ifndef CONFIG_SMP
- struct vm_struct **p, *tmp;
+ struct vm_struct *vm;
- /*
- * If this is a section based mapping we need to handle it
- * specially as the VM subsystem does not know how to handle
- * such a beast. We need the lock here b/c we need to clear
- * all the mappings before the area can be reclaimed
- * by someone else.
- */
- write_lock(&vmlist_lock);
- for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
- if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
- if (tmp->flags & VM_ARM_SECTION_MAPPING) {
- unmap_area_sections((unsigned long)tmp->addr,
- tmp->size);
- }
+ read_lock(&vmlist_lock);
+ for (vm = vmlist; vm; vm = vm->next) {
+ if (vm->addr > addr)
+ break;
+ if (!(vm->flags & VM_IOREMAP))
+ continue;
+ /* If this is a static mapping we must leave it alone */
+ if ((vm->flags & VM_ARM_STATIC_MAPPING) &&
+ (vm->addr <= addr) && (vm->addr + vm->size > addr)) {
+ read_unlock(&vmlist_lock);
+ return;
+ }
+#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
+ /*
+ * If this is a section based mapping we need to handle it
+ * specially as the VM subsystem does not know how to handle
+ * such a beast.
+ */
+ if ((vm->addr == addr) &&
+ (vm->flags & VM_ARM_SECTION_MAPPING)) {
+ unmap_area_sections((unsigned long)vm->addr, vm->size);
break;
}
- }
- write_unlock(&vmlist_lock);
#endif
+ }
+ read_unlock(&vmlist_lock);
vunmap(addr);
}
extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
+/*
+ * ARM specific vm_struct->flags bits.
+ */
+
+/* (super)section-mapped I/O regions used by ioremap()/iounmap() */
+#define VM_ARM_SECTION_MAPPING 0x80000000
+
+/* permanent static mappings from iotable_init() */
+#define VM_ARM_STATIC_MAPPING 0x40000000
+
+/* mapping type (attributes) for permanent static mappings */
+#define VM_ARM_MTYPE(mt) ((mt) << 20)
+#define VM_ARM_MTYPE_MASK (0x1f << 20)
+
#endif
#ifdef CONFIG_ZONE_DMA
#include <linux/nodemask.h>
#include <linux/memblock.h>
#include <linux/fs.h>
+#include <linux/vmalloc.h>
#include <asm/cputype.h>
#include <asm/sections.h>
}
early_param("nowb", early_nowrite);
+#ifndef CONFIG_ARM_LPAE
static int __init early_ecc(char *p)
{
if (memcmp(p, "on", 2) == 0)
return 0;
}
early_param("ecc", early_ecc);
+#endif
static int __init noalign_setup(char *__unused)
{
.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
.domain = DOMAIN_KERNEL,
},
+#ifndef CONFIG_ARM_LPAE
[MT_MINICLEAN] = {
.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_MINICACHE,
.domain = DOMAIN_KERNEL,
},
+#endif
[MT_LOW_VECTORS] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_RDONLY,
* ARMv6 and above have extended page tables.
*/
if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
+#ifndef CONFIG_ARM_LPAE
/*
* Mark cache clean areas and XIP ROM read only
* from SVC mode and no access from userspace.
mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+#endif
if (is_smp()) {
/*
mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
}
+#ifdef CONFIG_ARM_LPAE
+ /*
+ * Do not generate access flag faults for the kernel mappings.
+ */
+ for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
+ mem_types[i].prot_pte |= PTE_EXT_AF;
+ mem_types[i].prot_sect |= PMD_SECT_AF;
+ }
+ kern_pgprot |= PTE_EXT_AF;
+ vecs_pgprot |= PTE_EXT_AF;
+#endif
+
for (i = 0; i < 16; i++) {
unsigned long v = pgprot_val(protection_map[i]);
protection_map[i] = __pgprot(v | user_pgprot);
#define vectors_base() (vectors_high() ? 0xffff0000 : 0)
-static void __init *early_alloc(unsigned long sz)
+static void __init *early_alloc_aligned(unsigned long sz, unsigned long align)
{
- void *ptr = __va(memblock_alloc(sz, sz));
+ void *ptr = __va(memblock_alloc(sz, align));
memset(ptr, 0, sz);
return ptr;
}
+static void __init *early_alloc(unsigned long sz)
+{
+ return early_alloc_aligned(sz, sz);
+}
+
static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
{
if (pmd_none(*pmd)) {
if (((addr | end | phys) & ~SECTION_MASK) == 0) {
pmd_t *p = pmd;
+#ifndef CONFIG_ARM_LPAE
if (addr & SECTION_SIZE)
pmd++;
+#endif
do {
*pmd = __pmd(phys | type->prot_sect);
} while (pud++, addr = next, addr != end);
}
+#ifndef CONFIG_ARM_LPAE
static void __init create_36bit_mapping(struct map_desc *md,
const struct mem_type *type)
{
pgd += SUPERSECTION_SIZE >> PGDIR_SHIFT;
} while (addr != end);
}
+#endif /* !CONFIG_ARM_LPAE */
/*
* Create the page directory entries and any necessary
}
if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
- md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
+ md->virtual >= PAGE_OFFSET &&
+ (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
printk(KERN_WARNING "BUG: mapping for 0x%08llx"
- " at 0x%08lx overlaps vmalloc space\n",
+ " at 0x%08lx out of vmalloc space\n",
(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
}
type = &mem_types[md->type];
+#ifndef CONFIG_ARM_LPAE
/*
* Catch 36-bit addresses
*/
create_36bit_mapping(md, type);
return;
}
+#endif
addr = md->virtual & PAGE_MASK;
phys = __pfn_to_phys(md->pfn);
*/
void __init iotable_init(struct map_desc *io_desc, int nr)
{
- int i;
+ struct map_desc *md;
+ struct vm_struct *vm;
+
+ if (!nr)
+ return;
- for (i = 0; i < nr; i++)
- create_mapping(io_desc + i);
+ vm = early_alloc_aligned(sizeof(*vm) * nr, __alignof__(*vm));
+
+ for (md = io_desc; nr; md++, nr--) {
+ create_mapping(md);
+ vm->addr = (void *)(md->virtual & PAGE_MASK);
+ vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
+ vm->phys_addr = __pfn_to_phys(md->pfn);
+ vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
+ vm->flags |= VM_ARM_MTYPE(md->type);
+ vm->caller = iotable_init;
+ vm_area_add_early(vm++);
+ }
}
-static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M);
+static void * __initdata vmalloc_min =
+ (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
/*
* vmalloc=size forces the vmalloc area to be exactly 'size'
* bytes. This can be used to increase (or decrease) the vmalloc
- * area - the default is 128m.
+ * area - the default is 240m.
*/
static int __init early_vmalloc(char *arg)
{
struct membank *bank = &meminfo.bank[j];
*bank = meminfo.bank[i];
+ if (bank->start > ULONG_MAX)
+ highmem = 1;
+
#ifdef CONFIG_HIGHMEM
if (__va(bank->start) >= vmalloc_min ||
__va(bank->start) < (void *)PAGE_OFFSET)
* Split those memory banks which are partially overlapping
* the vmalloc area greatly simplifying things later.
*/
- if (__va(bank->start) < vmalloc_min &&
+ if (!highmem && __va(bank->start) < vmalloc_min &&
bank->size > vmalloc_min - __va(bank->start)) {
if (meminfo.nr_banks >= NR_BANKS) {
printk(KERN_CRIT "NR_BANKS too low, "
#else
bank->highmem = highmem;
+ /*
+ * Highmem banks not allowed with !CONFIG_HIGHMEM.
+ */
+ if (highmem) {
+ printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
+ "(!CONFIG_HIGHMEM).\n",
+ (unsigned long long)bank->start,
+ (unsigned long long)bank->start + bank->size - 1);
+ continue;
+ }
+
/*
* Check whether this memory bank would entirely overlap
* the vmalloc area.
}
#endif
meminfo.nr_banks = j;
+ high_memory = __va(lowmem_limit - 1) + 1;
memblock_set_current_limit(lowmem_limit);
}
/*
* Clear out all the kernel space mappings, except for the first
- * memory bank, up to the end of the vmalloc region.
+ * memory bank, up to the vmalloc region.
*/
for (addr = __phys_to_virt(end);
- addr < VMALLOC_END; addr += PMD_SIZE)
+ addr < VMALLOC_START; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
}
+#ifdef CONFIG_ARM_LPAE
+/* the first page is reserved for pgd */
+#define SWAPPER_PG_DIR_SIZE (PAGE_SIZE + \
+ PTRS_PER_PGD * PTRS_PER_PMD * sizeof(pmd_t))
+#else
#define SWAPPER_PG_DIR_SIZE (PTRS_PER_PGD * sizeof(pgd_t))
+#endif
/*
* Reserve the special regions of memory
}
/*
- * Set up device the mappings. Since we clear out the page tables for all
- * mappings above VMALLOC_END, we will remove any debug device mappings.
+ * Set up the device mappings. Since we clear out the page tables for all
+ * mappings above VMALLOC_START, we will remove any debug device mappings.
* This means you have to be careful how you debug this function, or any
* called function. This means you can't use any function or debugging
* method which may touch any device, otherwise the kernel _will_ crash.
*/
vectors_page = early_alloc(PAGE_SIZE);
- for (addr = VMALLOC_END; addr; addr += PMD_SIZE)
+ for (addr = VMALLOC_START; addr; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
/*
void __init sanity_check_meminfo(void)
{
+ phys_addr_t end = bank_phys_end(&meminfo.bank[meminfo.nr_banks - 1]);
+ high_memory = __va(end - 1) + 1;
}
/*
/*
* We don't need to do anything here for nommu machines.
*/
-void setup_mm_for_reboot(char mode)
+void setup_mm_for_reboot(void)
{
}
#include <linux/mm.h>
#include <linux/gfp.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
#include "mm.h"
+#ifdef CONFIG_ARM_LPAE
+#define __pgd_alloc() kmalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL)
+#define __pgd_free(pgd) kfree(pgd)
+#else
+#define __pgd_alloc() (pgd_t *)__get_free_pages(GFP_KERNEL, 2)
+#define __pgd_free(pgd) free_pages((unsigned long)pgd, 2)
+#endif
+
/*
* need to get a 16k page for level 1
*/
pmd_t *new_pmd, *init_pmd;
pte_t *new_pte, *init_pte;
- new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2);
+ new_pgd = __pgd_alloc();
if (!new_pgd)
goto no_pgd;
clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
+#ifdef CONFIG_ARM_LPAE
+ /*
+ * Allocate PMD table for modules and pkmap mappings.
+ */
+ new_pud = pud_alloc(mm, new_pgd + pgd_index(MODULES_VADDR),
+ MODULES_VADDR);
+ if (!new_pud)
+ goto no_pud;
+
+ new_pmd = pmd_alloc(mm, new_pud, 0);
+ if (!new_pmd)
+ goto no_pmd;
+#endif
+
if (!vectors_high()) {
/*
* On ARM, first page must always be allocated since it
- * contains the machine vectors.
+ * contains the machine vectors. The vectors are always high
+ * with LPAE.
*/
new_pud = pud_alloc(mm, new_pgd, 0);
if (!new_pud)
no_pmd:
pud_free(mm, new_pud);
no_pud:
- free_pages((unsigned long)new_pgd, 2);
+ __pgd_free(new_pgd);
no_pgd:
return NULL;
}
pgd_clear(pgd);
pud_free(mm, pud);
no_pgd:
- free_pages((unsigned long) pgd_base, 2);
+#ifdef CONFIG_ARM_LPAE
+ /*
+ * Free modules/pkmap or identity pmd tables.
+ */
+ for (pgd = pgd_base; pgd < pgd_base + PTRS_PER_PGD; pgd++) {
+ if (pgd_none_or_clear_bad(pgd))
+ continue;
+ if (pgd_val(*pgd) & L_PGD_SWAPPER)
+ continue;
+ pud = pud_offset(pgd, 0);
+ if (pud_none_or_clear_bad(pud))
+ continue;
+ pmd = pmd_offset(pud, 0);
+ pud_clear(pud);
+ pmd_free(mm, pmd);
+ pgd_clear(pgd);
+ pud_free(mm, pud);
+ }
+#endif
+ __pgd_free(pgd_base);
}
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm1020_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm1020_reset)
+ .popsection
/*
* cpu_arm1020_do_idle()
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm1020e_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm1020e_reset)
+ .popsection
/*
* cpu_arm1020e_do_idle()
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm1022_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm1022_reset)
+ .popsection
/*
* cpu_arm1022_do_idle()
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm1026_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm1026_reset)
+ .popsection
/*
* cpu_arm1026_do_idle()
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm6_reset)
ENTRY(cpu_arm7_reset)
mov r1, #0
mov r1, #0x30
mcr p15, 0, r1, c1, c0, 0 @ turn off MMU etc
mov pc, r0
+ENDPROC(cpu_arm6_reset)
+ENDPROC(cpu_arm7_reset)
+ .popsection
__CPUINIT
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm720_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate cache
bic ip, ip, #0x2100 @ ..v....s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm720_reset)
+ .popsection
__CPUINIT
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm740_reset)
mov ip, #0
mcr p15, 0, ip, c7, c0, 0 @ invalidate cache
bic ip, ip, #0x0000000c @ ............wc..
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm740_reset)
+ .popsection
__CPUINIT
* Params : loc(r0) address to jump to
* Purpose : Sets up everything for a reset and jump to the location for soft reset.
*/
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm7tdmi_reset)
mov pc, r0
+ENDPROC(cpu_arm7tdmi_reset)
+ .popsection
__CPUINIT
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm920_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm920_reset)
+ .popsection
/*
* cpu_arm920_do_idle()
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm922_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm922_reset)
+ .popsection
/*
* cpu_arm922_do_idle()
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm925_reset)
/* Send software reset to MPU and DSP */
mov ip, #0xff000000
orr ip, ip, #0x0000ce00
mov r4, #1
strh r4, [ip, #0x10]
+ENDPROC(cpu_arm925_reset)
+ .popsection
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm926_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm926_reset)
+ .popsection
/*
* cpu_arm926_do_idle()
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm940_reset)
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ flush I cache
bic ip, ip, #0x00001000 @ i-cache
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm940_reset)
+ .popsection
/*
* cpu_arm940_do_idle()
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm946_reset)
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ flush I cache
bic ip, ip, #0x00001000 @ i-cache
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_arm946_reset)
+ .popsection
/*
* cpu_arm946_do_idle()
* Params : loc(r0) address to jump to
* Purpose : Sets up everything for a reset and jump to the location for soft reset.
*/
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_arm9tdmi_reset)
mov pc, r0
+ENDPROC(cpu_arm9tdmi_reset)
+ .popsection
__CPUINIT
* loc: location to jump to for soft reset
*/
.align 4
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_fa526_reset)
/* TODO: Use CP8 if possible... */
mov ip, #0
nop
nop
mov pc, r0
+ENDPROC(cpu_fa526_reset)
+ .popsection
/*
* cpu_fa526_do_idle()
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_feroceon_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_feroceon_reset)
+ .popsection
/*
* cpu_feroceon_do_idle()
#if L_PTE_SHARED != PTE_EXT_SHARED
#error PTE shared bit mismatch
#endif
-#if (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
- L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
+#if !defined (CONFIG_ARM_LPAE) && \
+ (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
+ L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
#error Invalid Linux PTE bit settings
#endif
#endif /* CONFIG_MMU */
* (same as arm926)
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_mohawk_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_mohawk_reset)
+ .popsection
/*
* cpu_mohawk_do_idle()
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_sa110_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_sa110_reset)
+ .popsection
/*
* cpu_sa110_do_idle(type)
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_sa1100_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+ENDPROC(cpu_sa1100_reset)
+ .popsection
/*
* cpu_sa1100_do_idle(type)
* - loc - location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_v6_reset)
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
bic r1, r1, #0x1 @ ...............m
mov r1, #0
mcr p15, 0, r1, c7, c5, 4 @ ISB
mov pc, r0
+ENDPROC(cpu_v6_reset)
+ .popsection
/*
* cpu_v6_do_idle()
--- /dev/null
+/*
+ * arch/arm/mm/proc-v7-2level.S
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define TTB_S (1 << 1)
+#define TTB_RGN_NC (0 << 3)
+#define TTB_RGN_OC_WBWA (1 << 3)
+#define TTB_RGN_OC_WT (2 << 3)
+#define TTB_RGN_OC_WB (3 << 3)
+#define TTB_NOS (1 << 5)
+#define TTB_IRGN_NC ((0 << 0) | (0 << 6))
+#define TTB_IRGN_WBWA ((0 << 0) | (1 << 6))
+#define TTB_IRGN_WT ((1 << 0) | (0 << 6))
+#define TTB_IRGN_WB ((1 << 0) | (1 << 6))
+
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS_UP TTB_IRGN_WB|TTB_RGN_OC_WB
+#define PMD_FLAGS_UP PMD_SECT_WB
+
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS_SMP TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
+#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S
+
+/*
+ * cpu_v7_switch_mm(pgd_phys, tsk)
+ *
+ * Set the translation table base pointer to be pgd_phys
+ *
+ * - pgd_phys - physical address of new TTB
+ *
+ * It is assumed that:
+ * - we are not using split page tables
+ */
+ENTRY(cpu_v7_switch_mm)
+#ifdef CONFIG_MMU
+ mov r2, #0
+ ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
+ ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP)
+ ALT_UP(orr r0, r0, #TTB_FLAGS_UP)
+#ifdef CONFIG_ARM_ERRATA_430973
+ mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
+#endif
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
+#endif
+ mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
+ isb
+1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
+ isb
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
+#endif
+ mcr p15, 0, r1, c13, c0, 1 @ set context ID
+ isb
+#endif
+ mov pc, lr
+ENDPROC(cpu_v7_switch_mm)
+
+/*
+ * cpu_v7_set_pte_ext(ptep, pte)
+ *
+ * Set a level 2 translation table entry.
+ *
+ * - ptep - pointer to level 2 translation table entry
+ * (hardware version is stored at +2048 bytes)
+ * - pte - PTE value to store
+ * - ext - value for extended PTE bits
+ */
+ENTRY(cpu_v7_set_pte_ext)
+#ifdef CONFIG_MMU
+ str r1, [r0] @ linux version
+
+ bic r3, r1, #0x000003f0
+ bic r3, r3, #PTE_TYPE_MASK
+ orr r3, r3, r2
+ orr r3, r3, #PTE_EXT_AP0 | 2
+
+ tst r1, #1 << 4
+ orrne r3, r3, #PTE_EXT_TEX(1)
+
+ eor r1, r1, #L_PTE_DIRTY
+ tst r1, #L_PTE_RDONLY | L_PTE_DIRTY
+ orrne r3, r3, #PTE_EXT_APX
+
+ tst r1, #L_PTE_USER
+ orrne r3, r3, #PTE_EXT_AP1
+#ifdef CONFIG_CPU_USE_DOMAINS
+ @ allow kernel read/write access to read-only user pages
+ tstne r3, #PTE_EXT_APX
+ bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
+#endif
+
+ tst r1, #L_PTE_XN
+ orrne r3, r3, #PTE_EXT_XN
+
+ tst r1, #L_PTE_YOUNG
+ tstne r1, #L_PTE_PRESENT
+ moveq r3, #0
+
+ ARM( str r3, [r0, #2048]! )
+ THUMB( add r0, r0, #2048 )
+ THUMB( str r3, [r0] )
+ mcr p15, 0, r0, c7, c10, 1 @ flush_pte
+#endif
+ mov pc, lr
+ENDPROC(cpu_v7_set_pte_ext)
+
+ /*
+ * Memory region attributes with SCTLR.TRE=1
+ *
+ * n = TEX[0],C,B
+ * TR = PRRR[2n+1:2n] - memory type
+ * IR = NMRR[2n+1:2n] - inner cacheable property
+ * OR = NMRR[2n+17:2n+16] - outer cacheable property
+ *
+ * n TR IR OR
+ * UNCACHED 000 00
+ * BUFFERABLE 001 10 00 00
+ * WRITETHROUGH 010 10 10 10
+ * WRITEBACK 011 10 11 11
+ * reserved 110
+ * WRITEALLOC 111 10 01 01
+ * DEV_SHARED 100 01
+ * DEV_NONSHARED 100 01
+ * DEV_WC 001 10
+ * DEV_CACHED 011 10
+ *
+ * Other attributes:
+ *
+ * DS0 = PRRR[16] = 0 - device shareable property
+ * DS1 = PRRR[17] = 1 - device shareable property
+ * NS0 = PRRR[18] = 0 - normal shareable property
+ * NS1 = PRRR[19] = 1 - normal shareable property
+ * NOS = PRRR[24+n] = 1 - not outer shareable
+ */
+.equ PRRR, 0xff0a81a8
+.equ NMRR, 0x40e040e0
+
+ /*
+ * Macro for setting up the TTBRx and TTBCR registers.
+ * - \ttb0 and \ttb1 updated with the corresponding flags.
+ */
+ .macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp
+ mcr p15, 0, \zero, c2, c0, 2 @ TTB control register
+ ALT_SMP(orr \ttbr0, \ttbr0, #TTB_FLAGS_SMP)
+ ALT_UP(orr \ttbr0, \ttbr0, #TTB_FLAGS_UP)
+ ALT_SMP(orr \ttbr1, \ttbr1, #TTB_FLAGS_SMP)
+ ALT_UP(orr \ttbr1, \ttbr1, #TTB_FLAGS_UP)
+ mcr p15, 0, \ttbr1, c2, c0, 1 @ load TTB1
+ .endm
+
+ __CPUINIT
+
+ /* AT
+ * TFR EV X F I D LR S
+ * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
+ * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
+ * 1 0 110 0011 1100 .111 1101 < we want
+ */
+ .align 2
+ .type v7_crval, #object
+v7_crval:
+ crval clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
+
+ .previous
--- /dev/null
+/*
+ * arch/arm/mm/proc-v7-3level.S
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Copyright (C) 2011 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ * based on arch/arm/mm/proc-v7-2level.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define TTB_IRGN_NC (0 << 8)
+#define TTB_IRGN_WBWA (1 << 8)
+#define TTB_IRGN_WT (2 << 8)
+#define TTB_IRGN_WB (3 << 8)
+#define TTB_RGN_NC (0 << 10)
+#define TTB_RGN_OC_WBWA (1 << 10)
+#define TTB_RGN_OC_WT (2 << 10)
+#define TTB_RGN_OC_WB (3 << 10)
+#define TTB_S (3 << 12)
+#define TTB_EAE (1 << 31)
+
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS_UP (TTB_IRGN_WB|TTB_RGN_OC_WB)
+#define PMD_FLAGS_UP (PMD_SECT_WB)
+
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS_SMP (TTB_IRGN_WBWA|TTB_S|TTB_RGN_OC_WBWA)
+#define PMD_FLAGS_SMP (PMD_SECT_WBWA|PMD_SECT_S)
+
+/*
+ * cpu_v7_switch_mm(pgd_phys, tsk)
+ *
+ * Set the translation table base pointer to be pgd_phys (physical address of
+ * the new TTB).
+ */
+ENTRY(cpu_v7_switch_mm)
+#ifdef CONFIG_MMU
+ ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
+ and r3, r1, #0xff
+ mov r3, r3, lsl #(48 - 32) @ ASID
+ mcrr p15, 0, r0, r3, c2 @ set TTB 0
+ isb
+#endif
+ mov pc, lr
+ENDPROC(cpu_v7_switch_mm)
+
+/*
+ * cpu_v7_set_pte_ext(ptep, pte)
+ *
+ * Set a level 2 translation table entry.
+ * - ptep - pointer to level 3 translation table entry
+ * - pte - PTE value to store (64-bit in r2 and r3)
+ */
+ENTRY(cpu_v7_set_pte_ext)
+#ifdef CONFIG_MMU
+ tst r2, #L_PTE_PRESENT
+ beq 1f
+ tst r3, #1 << (55 - 32) @ L_PTE_DIRTY
+ orreq r2, #L_PTE_RDONLY
+1: strd r2, r3, [r0]
+ mcr p15, 0, r0, c7, c10, 1 @ flush_pte
+#endif
+ mov pc, lr
+ENDPROC(cpu_v7_set_pte_ext)
+
+ /*
+ * Memory region attributes for LPAE (defined in pgtable-3level.h):
+ *
+ * n = AttrIndx[2:0]
+ *
+ * n MAIR
+ * UNCACHED 000 00000000
+ * BUFFERABLE 001 01000100
+ * DEV_WC 001 01000100
+ * WRITETHROUGH 010 10101010
+ * WRITEBACK 011 11101110
+ * DEV_CACHED 011 11101110
+ * DEV_SHARED 100 00000100
+ * DEV_NONSHARED 100 00000100
+ * unused 101
+ * unused 110
+ * WRITEALLOC 111 11111111
+ */
+.equ PRRR, 0xeeaa4400 @ MAIR0
+.equ NMRR, 0xff000004 @ MAIR1
+
+ /*
+ * Macro for setting up the TTBRx and TTBCR registers.
+ * - \ttbr1 updated.
+ */
+ .macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp
+ ldr \tmp, =swapper_pg_dir @ swapper_pg_dir virtual address
+ cmp \ttbr1, \tmp @ PHYS_OFFSET > PAGE_OFFSET? (branch below)
+ mrc p15, 0, \tmp, c2, c0, 2 @ TTB control register
+ orr \tmp, \tmp, #TTB_EAE
+ ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP)
+ ALT_UP(orr \tmp, \tmp, #TTB_FLAGS_UP)
+ ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP << 16)
+ ALT_UP(orr \tmp, \tmp, #TTB_FLAGS_UP << 16)
+ /*
+ * TTBR0/TTBR1 split (PAGE_OFFSET):
+ * 0x40000000: T0SZ = 2, T1SZ = 0 (not used)
+ * 0x80000000: T0SZ = 0, T1SZ = 1
+ * 0xc0000000: T0SZ = 0, T1SZ = 2
+ *
+ * Only use this feature if PHYS_OFFSET <= PAGE_OFFSET, otherwise
+ * booting secondary CPUs would end up using TTBR1 for the identity
+ * mapping set up in TTBR0.
+ */
+ bhi 9001f @ PHYS_OFFSET > PAGE_OFFSET?
+ orr \tmp, \tmp, #(((PAGE_OFFSET >> 30) - 1) << 16) @ TTBCR.T1SZ
+#if defined CONFIG_VMSPLIT_2G
+ /* PAGE_OFFSET == 0x80000000, T1SZ == 1 */
+ add \ttbr1, \ttbr1, #1 << 4 @ skip two L1 entries
+#elif defined CONFIG_VMSPLIT_3G
+ /* PAGE_OFFSET == 0xc0000000, T1SZ == 2 */
+ add \ttbr1, \ttbr1, #4096 * (1 + 3) @ only L2 used, skip pgd+3*pmd
+#endif
+ /* CONFIG_VMSPLIT_1G does not need TTBR1 adjustment */
+9001: mcr p15, 0, \tmp, c2, c0, 2 @ TTB control register
+ mcrr p15, 1, \ttbr1, \zero, c2 @ load TTBR1
+ .endm
+
+ __CPUINIT
+
+ /*
+ * AT
+ * TFR EV X F IHD LR S
+ * .EEE ..EE PUI. .TAT 4RVI ZWRS BLDP WCAM
+ * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
+ * 11 0 110 1 0011 1100 .111 1101 < we want
+ */
+ .align 2
+ .type v7_crval, #object
+v7_crval:
+ crval clear=0x0120c302, mmuset=0x30c23c7d, ucset=0x00c01c7c
+
+ .previous
#include "proc-macros.S"
-#define TTB_S (1 << 1)
-#define TTB_RGN_NC (0 << 3)
-#define TTB_RGN_OC_WBWA (1 << 3)
-#define TTB_RGN_OC_WT (2 << 3)
-#define TTB_RGN_OC_WB (3 << 3)
-#define TTB_NOS (1 << 5)
-#define TTB_IRGN_NC ((0 << 0) | (0 << 6))
-#define TTB_IRGN_WBWA ((0 << 0) | (1 << 6))
-#define TTB_IRGN_WT ((1 << 0) | (0 << 6))
-#define TTB_IRGN_WB ((1 << 0) | (1 << 6))
-
-/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
-#define TTB_FLAGS_UP TTB_IRGN_WB|TTB_RGN_OC_WB
-#define PMD_FLAGS_UP PMD_SECT_WB
-
-/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
-#define TTB_FLAGS_SMP TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
-#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S
+#ifdef CONFIG_ARM_LPAE
+#include "proc-v7-3level.S"
+#else
+#include "proc-v7-2level.S"
+#endif
ENTRY(cpu_v7_proc_init)
mov pc, lr
* caches disabled.
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_v7_reset)
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
bic r1, r1, #0x1 @ ...............m
isb
mov pc, r0
ENDPROC(cpu_v7_reset)
+ .popsection
/*
* cpu_v7_do_idle()
mov pc, lr
ENDPROC(cpu_v7_dcache_clean_area)
-/*
- * cpu_v7_switch_mm(pgd_phys, tsk)
- *
- * Set the translation table base pointer to be pgd_phys
- *
- * - pgd_phys - physical address of new TTB
- *
- * It is assumed that:
- * - we are not using split page tables
- */
-ENTRY(cpu_v7_switch_mm)
-#ifdef CONFIG_MMU
- mov r2, #0
- ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
- ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP)
- ALT_UP(orr r0, r0, #TTB_FLAGS_UP)
-#ifdef CONFIG_ARM_ERRATA_430973
- mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
-#endif
-#ifdef CONFIG_ARM_ERRATA_754322
- dsb
-#endif
- mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
- isb
-1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
- isb
-#ifdef CONFIG_ARM_ERRATA_754322
- dsb
-#endif
- mcr p15, 0, r1, c13, c0, 1 @ set context ID
- isb
-#endif
- mov pc, lr
-ENDPROC(cpu_v7_switch_mm)
-
-/*
- * cpu_v7_set_pte_ext(ptep, pte)
- *
- * Set a level 2 translation table entry.
- *
- * - ptep - pointer to level 2 translation table entry
- * (hardware version is stored at +2048 bytes)
- * - pte - PTE value to store
- * - ext - value for extended PTE bits
- */
-ENTRY(cpu_v7_set_pte_ext)
-#ifdef CONFIG_MMU
- str r1, [r0] @ linux version
-
- bic r3, r1, #0x000003f0
- bic r3, r3, #PTE_TYPE_MASK
- orr r3, r3, r2
- orr r3, r3, #PTE_EXT_AP0 | 2
-
- tst r1, #1 << 4
- orrne r3, r3, #PTE_EXT_TEX(1)
-
- eor r1, r1, #L_PTE_DIRTY
- tst r1, #L_PTE_RDONLY | L_PTE_DIRTY
- orrne r3, r3, #PTE_EXT_APX
-
- tst r1, #L_PTE_USER
- orrne r3, r3, #PTE_EXT_AP1
-#ifdef CONFIG_CPU_USE_DOMAINS
- @ allow kernel read/write access to read-only user pages
- tstne r3, #PTE_EXT_APX
- bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-#endif
-
- tst r1, #L_PTE_XN
- orrne r3, r3, #PTE_EXT_XN
-
- tst r1, #L_PTE_YOUNG
- tstne r1, #L_PTE_PRESENT
- moveq r3, #0
-
- ARM( str r3, [r0, #2048]! )
- THUMB( add r0, r0, #2048 )
- THUMB( str r3, [r0] )
- mcr p15, 0, r0, c7, c10, 1 @ flush_pte
-#endif
- mov pc, lr
-ENDPROC(cpu_v7_set_pte_ext)
-
string cpu_v7_name, "ARMv7 Processor"
.align
- /*
- * Memory region attributes with SCTLR.TRE=1
- *
- * n = TEX[0],C,B
- * TR = PRRR[2n+1:2n] - memory type
- * IR = NMRR[2n+1:2n] - inner cacheable property
- * OR = NMRR[2n+17:2n+16] - outer cacheable property
- *
- * n TR IR OR
- * UNCACHED 000 00
- * BUFFERABLE 001 10 00 00
- * WRITETHROUGH 010 10 10 10
- * WRITEBACK 011 10 11 11
- * reserved 110
- * WRITEALLOC 111 10 01 01
- * DEV_SHARED 100 01
- * DEV_NONSHARED 100 01
- * DEV_WC 001 10
- * DEV_CACHED 011 10
- *
- * Other attributes:
- *
- * DS0 = PRRR[16] = 0 - device shareable property
- * DS1 = PRRR[17] = 1 - device shareable property
- * NS0 = PRRR[18] = 0 - normal shareable property
- * NS1 = PRRR[19] = 1 - normal shareable property
- * NOS = PRRR[24+n] = 1 - not outer shareable
- */
-.equ PRRR, 0xff0a81a8
-.equ NMRR, 0x40e040e0
-
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
-.equ cpu_v7_suspend_size, 4 * 7
+.equ cpu_v7_suspend_size, 4 * 8
#ifdef CONFIG_ARM_CPU_SUSPEND
ENTRY(cpu_v7_do_suspend)
stmfd sp!, {r4 - r10, lr}
stmia r0!, {r4 - r5}
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
mrc p15, 0, r7, c2, c0, 1 @ TTB 1
+ mrc p15, 0, r11, c2, c0, 2 @ TTB control register
mrc p15, 0, r8, c1, c0, 0 @ Control register
mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register
mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control
- stmia r0, {r6 - r10}
+ stmia r0, {r6 - r11}
ldmfd sp!, {r4 - r10, pc}
ENDPROC(cpu_v7_do_suspend)
ldmia r0!, {r4 - r5}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID
- ldmia r0, {r6 - r10}
+ ldmia r0, {r6 - r11}
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
+#ifndef CONFIG_ARM_LPAE
ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
+#endif
mcr p15, 0, r1, c2, c0, 0 @ TTB 0
mcr p15, 0, r7, c2, c0, 1 @ TTB 1
- mcr p15, 0, ip, c2, c0, 2 @ TTB control register
+ mcr p15, 0, r11, c2, c0, 2 @ TTB control register
mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
teq r4, r9 @ Is it already set?
mcrne p15, 0, r9, c1, c0, 1 @ No, so write it
dsb
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
- mcr p15, 0, r10, c2, c0, 2 @ TTB control register
- ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP)
- ALT_UP(orr r4, r4, #TTB_FLAGS_UP)
- ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP)
- ALT_UP(orr r8, r8, #TTB_FLAGS_UP)
- mcr p15, 0, r8, c2, c0, 1 @ load TTB1
+ v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup
ldr r5, =PRRR @ PRRR
ldr r6, =NMRR @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mov pc, lr @ return to head.S:__ret
ENDPROC(__v7_setup)
- /* AT
- * TFR EV X F I D LR S
- * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
- * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
- * 1 0 110 0011 1100 .111 1101 < we want
- */
- .type v7_crval, #object
-v7_crval:
- crval clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
-
+ .align 2
__v7_setup_stack:
.space 4 * 11 @ 11 registers
*/
.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0
ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
- PMD_FLAGS_SMP | \mm_mmuflags)
+ PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags)
ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
- PMD_FLAGS_UP | \mm_mmuflags)
- .long PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ | \io_mmuflags
+ PMD_SECT_AF | PMD_FLAGS_UP | \mm_mmuflags)
+ .long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ | PMD_SECT_AF | \io_mmuflags
W(b) \initfunc
.long cpu_arch_name
.long cpu_elf_name
.long v7_cache_fns
.endm
+#ifndef CONFIG_ARM_LPAE
/*
* ARM Ltd. Cortex A5 processor.
*/
.long 0xff0ffff0
__v7_proc __v7_ca9mp_setup
.size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
+#endif /* CONFIG_ARM_LPAE */
/*
* ARM Ltd. Cortex A15 processor.
* loc: location to jump to for soft reset
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_xsc3_reset)
mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
msr cpsr_c, r1 @ reset CPSR
@ already containing those two last instructions to survive.
mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs
mov pc, r0
+ENDPROC(cpu_xsc3_reset)
+ .popsection
/*
* cpu_xsc3_do_idle()
* Beware PXA270 erratum E7.
*/
.align 5
+ .pushsection .idmap.text, "ax"
ENTRY(cpu_xscale_reset)
mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
msr cpsr_c, r1 @ reset CPSR
@ already containing those two last instructions to survive.
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mov pc, r0
+ENDPROC(cpu_xscale_reset)
+ .popsection
/*
* cpu_xscale_do_idle()
obj-$(CONFIG_ARCH_IOP32X) += pci.o
obj-$(CONFIG_ARCH_IOP32X) += setup.o
obj-$(CONFIG_ARCH_IOP32X) += time.o
-obj-$(CONFIG_ARCH_IOP32X) += io.o
obj-$(CONFIG_ARCH_IOP32X) += cp6.o
obj-$(CONFIG_ARCH_IOP32X) += adma.o
obj-$(CONFIG_ARCH_IOP32X) += pmu.o
obj-$(CONFIG_ARCH_IOP33X) += pci.o
obj-$(CONFIG_ARCH_IOP33X) += setup.o
obj-$(CONFIG_ARCH_IOP33X) += time.o
-obj-$(CONFIG_ARCH_IOP33X) += io.o
obj-$(CONFIG_ARCH_IOP33X) += cp6.o
obj-$(CONFIG_ARCH_IOP33X) += adma.o
obj-$(CONFIG_ARCH_IOP33X) += pmu.o
+++ /dev/null
-/*
- * iop3xx custom ioremap implementation
- * Copyright (c) 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
- unsigned int mtype)
-{
- void __iomem * retval;
-
- switch (cookie) {
- case IOP3XX_PCI_LOWER_IO_PA ... IOP3XX_PCI_UPPER_IO_PA:
- retval = (void *) IOP3XX_PCI_IO_PHYS_TO_VIRT(cookie);
- break;
- case IOP3XX_PERIPHERAL_PHYS_BASE ... IOP3XX_PERIPHERAL_UPPER_PA:
- retval = (void *) IOP3XX_PMMR_PHYS_TO_VIRT(cookie);
- break;
- default:
- retval = __arm_ioremap_caller(cookie, size, mtype,
- __builtin_return_address(0));
- }
-
- return retval;
-}
-EXPORT_SYMBOL(__iop3xx_ioremap);
-
-void __iop3xx_iounmap(void __iomem *addr)
-{
- extern void __iounmap(volatile void __iomem *addr);
-
- switch ((u32) addr) {
- case IOP3XX_PCI_LOWER_IO_VA ... IOP3XX_PCI_UPPER_IO_VA:
- case IOP3XX_PERIPHERAL_VIRT_BASE ... IOP3XX_PERIPHERAL_UPPER_VA:
- goto skip;
- }
- __iounmap(addr);
-
-skip:
- return;
-}
-EXPORT_SYMBOL(__iop3xx_iounmap);
# Common support
obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
-obj-$(CONFIG_ARM_GIC) += gic.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/io.h>
-#include <asm/exception.h>
-#include <asm/localtimer.h>
-#include <asm/hardware/gic.h>
-#ifdef CONFIG_SMP
-#include <asm/smp.h>
-#endif
-
-asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
-{
- u32 irqstat, irqnr;
-
- do {
- irqstat = readl_relaxed(gic_cpu_base_addr + GIC_CPU_INTACK);
- irqnr = irqstat & 0x3ff;
- if (irqnr == 1023)
- break;
-
- if (irqnr > 15 && irqnr < 1021)
- handle_IRQ(irqnr, regs);
-#ifdef CONFIG_SMP
- else {
- writel_relaxed(irqstat, gic_cpu_base_addr +
- GIC_CPU_EOI);
- handle_IPI(irqnr, regs);
- }
-#endif
- } while (1);
-}
void avic_handle_irq(struct pt_regs *);
void tzic_handle_irq(struct pt_regs *);
-void gic_handle_irq(struct pt_regs *);
#define imx1_handle_irq avic_handle_irq
#define imx21_handle_irq avic_handle_irq
* published by the Free Software Foundation.
*/
-/* Unused, we use CONFIG_MULTI_IRQ_HANDLER */
-
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- .endm
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- .endm
#ifndef __MACH_MX1_H__
#define __MACH_MX1_H__
-#include <mach/vmalloc.h>
-
/*
* Memory map
*/
+++ /dev/null
-/*
- * Copyright (C) 2000 Russell King.
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_VMALLOC_H__
-#define __ASM_ARCH_MXC_VMALLOC_H__
-
-/* vmalloc ending address */
-#define VMALLOC_END 0xf4000000UL
-
-#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */
mdelay(50);
/* we'll take a jump through zero as a poor second */
- cpu_reset(0);
+ soft_restart(0);
}
void mxc_arch_reset_init(void __iomem *base)
# Common support
obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
- usb.o fb.o io.o counter_32k.o
+ usb.o fb.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
-obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>
#include <linux/omapfb.h>
#include <plat/common.h>
omap_vram_reserve_sdram_memblock();
omap_dsp_reserve_sdram_memblock();
}
+
+void __init omap_init_consistent_dma_size(void)
+{
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+ init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
+#endif
+}
--- /dev/null
+/*
+ * This file contains the address info for various AM33XX modules.
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_AM33XX_H
+#define __ASM_ARCH_AM33XX_H
+
+#define L4_SLOW_AM33XX_BASE 0x48000000
+
+#define AM33XX_SCM_BASE 0x44E10000
+#define AM33XX_CTRL_BASE AM33XX_SCM_BASE
+#define AM33XX_PRCM_BASE 0x44E00000
+
+#endif /* __ASM_ARCH_AM33XX_H */
#define RATE_IN_4430 (1 << 5)
#define RATE_IN_TI816X (1 << 6)
#define RATE_IN_4460 (1 << 7)
+#define RATE_IN_AM33XX (1 << 8)
+#define RATE_IN_TI814X (1 << 9)
#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
struct clksel_rate {
u32 val;
u8 div;
- u8 flags;
+ u16 flags;
};
/**
#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
#define __ARCH_ARM_MACH_OMAP_COMMON_H
-#include <linux/delay.h>
-
#include <plat/i2c.h>
#include <plat/omap_hwmod.h>
-struct sys_timer;
-
-extern void omap_map_common_io(void);
-extern struct sys_timer omap1_timer;
-extern struct sys_timer omap2_timer;
-extern struct sys_timer omap3_timer;
-extern struct sys_timer omap3_secure_timer;
-extern struct sys_timer omap4_timer;
-extern bool omap_32k_timer_init(void);
extern int __init omap_init_clocksource_32k(void);
extern unsigned long long notrace omap_32k_sched_clock(void);
extern void omap_reserve(void);
-
-void omap2420_init_early(void);
-void omap2430_init_early(void);
-void omap3430_init_early(void);
-void omap35xx_init_early(void);
-void omap3630_init_early(void);
-void omap3_init_early(void); /* Do not use this one */
-void am35xx_init_early(void);
-void ti816x_init_early(void);
-void omap4430_init_early(void);
-
extern int omap_dss_reset(struct omap_hwmod *);
void omap_sram_init(void);
-/*
- * IO bases for various OMAP processors
- * Except the tap base, rest all the io bases
- * listed are physical addresses.
- */
-struct omap_globals {
- u32 class; /* OMAP class to detect */
- void __iomem *tap; /* Control module ID code */
- void __iomem *sdrc; /* SDRAM Controller */
- void __iomem *sms; /* SDRAM Memory Scheduler */
- void __iomem *ctrl; /* System Control Module */
- void __iomem *ctrl_pad; /* PAD Control Module */
- void __iomem *prm; /* Power and Reset Management */
- void __iomem *cm; /* Clock Management */
- void __iomem *cm2;
-};
-
-void omap2_set_globals_242x(void);
-void omap2_set_globals_243x(void);
-void omap2_set_globals_3xxx(void);
-void omap2_set_globals_443x(void);
-void omap2_set_globals_ti816x(void);
-
-/* These get called from omap2_set_globals_xxxx(), do not call these */
-void omap2_set_globals_tap(struct omap_globals *);
-void omap2_set_globals_sdrc(struct omap_globals *);
-void omap2_set_globals_control(struct omap_globals *);
-void omap2_set_globals_prcm(struct omap_globals *);
-
-void omap242x_map_io(void);
-void omap243x_map_io(void);
-void omap3_map_io(void);
-void omap4_map_io(void);
-
-
-/**
- * omap_test_timeout - busy-loop, testing a condition
- * @cond: condition to test until it evaluates to true
- * @timeout: maximum number of microseconds in the timeout
- * @index: loop index (integer)
- *
- * Loop waiting for @cond to become true or until at least @timeout
- * microseconds have passed. To use, define some integer @index in the
- * calling code. After running, if @index == @timeout, then the loop has
- * timed out.
- */
-#define omap_test_timeout(cond, timeout, index) \
-({ \
- for (index = 0; index < timeout; index++) { \
- if (cond) \
- break; \
- udelay(1); \
- } \
-})
-
-extern struct device *omap2_get_mpuss_device(void);
-extern struct device *omap2_get_iva_device(void);
-extern struct device *omap2_get_l3_device(void);
-extern struct device *omap4_get_dsp_device(void);
-
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
* cpu_is_omap343x(): True for OMAP3430
* cpu_is_omap443x(): True for OMAP4430
* cpu_is_omap446x(): True for OMAP4460
+ * cpu_is_omap447x(): True for OMAP4470
*/
#define GET_OMAP_CLASS (omap_rev() & 0xff)
return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
}
+#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff)
+
+#define IS_AM_CLASS(class, id) \
+static inline int is_am ##class (void) \
+{ \
+ return (GET_AM_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff)
+
+#define IS_TI_CLASS(class, id) \
+static inline int is_ti ##class (void) \
+{ \
+ return (GET_TI_CLASS == (id)) ? 1 : 0; \
+}
+
#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
#define IS_OMAP_SUBCLASS(subclass, id) \
return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
}
+#define IS_AM_SUBCLASS(subclass, id) \
+static inline int is_am ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
IS_OMAP_CLASS(7xx, 0x07)
IS_OMAP_CLASS(15xx, 0x15)
IS_OMAP_CLASS(16xx, 0x16)
IS_OMAP_CLASS(24xx, 0x24)
IS_OMAP_CLASS(34xx, 0x34)
IS_OMAP_CLASS(44xx, 0x44)
+IS_AM_CLASS(33xx, 0x33)
+
+IS_TI_CLASS(81xx, 0x81)
IS_OMAP_SUBCLASS(242x, 0x242)
IS_OMAP_SUBCLASS(243x, 0x243)
IS_OMAP_SUBCLASS(363x, 0x363)
IS_OMAP_SUBCLASS(443x, 0x443)
IS_OMAP_SUBCLASS(446x, 0x446)
+IS_OMAP_SUBCLASS(447x, 0x447)
IS_TI_SUBCLASS(816x, 0x816)
+IS_TI_SUBCLASS(814x, 0x814)
+IS_AM_SUBCLASS(335x, 0x335)
#define cpu_is_omap7xx() 0
#define cpu_is_omap15xx() 0
#define cpu_is_omap243x() 0
#define cpu_is_omap34xx() 0
#define cpu_is_omap343x() 0
+#define cpu_is_ti81xx() 0
#define cpu_is_ti816x() 0
+#define cpu_is_ti814x() 0
+#define cpu_is_am33xx() 0
+#define cpu_is_am335x() 0
#define cpu_is_omap44xx() 0
#define cpu_is_omap443x() 0
#define cpu_is_omap446x() 0
+#define cpu_is_omap447x() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap3530
# undef cpu_is_omap3505
# undef cpu_is_omap3517
+# undef cpu_is_ti81xx
# undef cpu_is_ti816x
+# undef cpu_is_ti814x
+# undef cpu_is_am33xx
+# undef cpu_is_am335x
# define cpu_is_omap3430() is_omap3430()
# define cpu_is_omap3503() (cpu_is_omap3430() && \
(!omap3_has_iva()) && \
!omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
+# define cpu_is_ti81xx() is_ti81xx()
# define cpu_is_ti816x() is_ti816x()
+# define cpu_is_ti814x() is_ti814x()
+# define cpu_is_am33xx() is_am33xx()
+# define cpu_is_am335x() is_am335x()
#endif
# if defined(CONFIG_ARCH_OMAP4)
# undef cpu_is_omap44xx
# undef cpu_is_omap443x
# undef cpu_is_omap446x
+# undef cpu_is_omap447x
# define cpu_is_omap44xx() is_omap44xx()
# define cpu_is_omap443x() is_omap443x()
# define cpu_is_omap446x() is_omap446x()
+# define cpu_is_omap447x() is_omap447x()
# endif
/* Macros to detect if we have OMAP1 or OMAP2 */
#define TI8168_REV_ES1_0 TI816X_CLASS
#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
+#define TI814X_CLASS 0x81400034
+#define TI8148_REV_ES1_0 TI814X_CLASS
+#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8))
+#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8))
+
+#define AM335X_CLASS 0x33500034
+#define AM335X_REV_ES1_0 AM335X_CLASS
+
#define OMAP443X_CLASS 0x44300044
#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8))
#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8))
#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8))
+#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8))
#define OMAP446X_CLASS 0x44600044
#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
+#define OMAP447X_CLASS 0x44700044
+#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8))
+
void omap2_check_revision(void);
/*
#include <plat/omap24xx.h>
#include <plat/omap34xx.h>
#include <plat/omap44xx.h>
-#include <plat/ti816x.h>
+#include <plat/ti81xx.h>
+#include <plat/am33xx.h>
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
#define OMAP4_L3_IO_OFFSET 0xb4000000
#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
+#define AM33XX_L4_WK_IO_OFFSET 0xb5000000
+#define AM33XX_L4_WK_IO_ADDRESS(pa) IOMEM((pa) + AM33XX_L4_WK_IO_OFFSET)
+
#define OMAP4_L3_PER_IO_OFFSET 0xb1100000
#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
+/*
+ * ----------------------------------------------------------------------------
+ * AM33XX specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+#define L4_WK_AM33XX_PHYS L4_WK_AM33XX_BASE
+#define L4_WK_AM33XX_VIRT (L4_WK_AM33XX_PHYS + AM33XX_L4_WK_IO_OFFSET)
+#define L4_WK_AM33XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
+
/*
* Need to look at the Size 4M for L4.
* VPOM3430 was not working for Int controller
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
-void omap_ioremap_init(void);
-
extern u8 omap_readb(u32 pa);
extern u16 omap_readw(u32 pa);
extern u32 omap_readl(u32 pa);
extern void omap_writel(u32 v, u32 pa);
struct omap_sdrc_params;
-
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-void omap7xx_map_io(void);
-#else
-static inline void omap_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-void omap15xx_map_io(void);
-#else
-static inline void omap15xx_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
-void omap16xx_map_io(void);
-#else
-static inline void omap16xx_map_io(void)
-{
-}
-#endif
-
-void omap1_init_early(void);
-
-#ifdef CONFIG_SOC_OMAP2420
-extern void omap242x_map_common_io(void);
-#else
-static inline void omap242x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-extern void omap243x_map_common_io(void);
-#else
-static inline void omap243x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-extern void omap34xx_map_common_io(void);
-#else
-static inline void omap34xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAPTI816X
-extern void omapti816x_map_common_io(void);
-#else
-static inline void omapti816x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-extern void omap44xx_map_common_io(void);
-#else
-static inline void omap44xx_map_common_io(void)
-{
-}
-#endif
-
-extern void omap2_init_common_infrastructure(void);
extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
-#define __arch_ioremap omap_ioremap
-#define __arch_iounmap omap_iounmap
-
-void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
-void omap_iounmap(volatile void __iomem *addr);
-
extern void __init omap_init_consistent_dma_size(void);
#endif
#define INTCPS_NR_MIR_REGS 3
#define INTCPS_NR_IRQS 96
-#ifndef __ASSEMBLY__
-extern void __iomem *omap_irq_base;
-void omap1_init_irq(void);
-void omap2_init_irq(void);
-void omap3_init_irq(void);
-void ti816x_init_irq(void);
-extern int omap_irq_pending(void);
-void omap_intc_save_context(void);
-void omap_intc_restore_context(void);
-void omap3_intc_suspend(void);
-void omap3_intc_prepare_idle(void);
-void omap3_intc_resume_idle(void);
-#endif
-
#include <mach/hardware.h>
#ifdef CONFIG_FIQ
#define L4_EMU_34XX_BASE 0x54000000
#define L3_34XX_BASE 0x68000000
+#define L4_WK_AM33XX_BASE 0x44C00000
+
#define OMAP3430_32KSYNCT_BASE 0x48320000
#define OMAP3430_CM_BASE 0x48004800
#define OMAP3430_PRM_BASE 0x48306800
#define OMAP4_UART3_BASE 0x48020000
#define OMAP4_UART4_BASE 0x4806e000
-/* TI816X serial ports */
-#define TI816X_UART1_BASE 0x48020000
-#define TI816X_UART2_BASE 0x48022000
-#define TI816X_UART3_BASE 0x48024000
+/* TI81XX serial ports */
+#define TI81XX_UART1_BASE 0x48020000
+#define TI81XX_UART2_BASE 0x48022000
+#define TI81XX_UART3_BASE 0x48024000
/* AM3505/3517 UART4 */
#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
#define OMAP4UART2 OMAP2UART2
#define OMAP4UART3 43
#define OMAP4UART4 44
-#define TI816XUART1 81
-#define TI816XUART2 82
-#define TI816XUART3 83
+#define TI81XXUART1 81
+#define TI81XXUART2 82
+#define TI81XXUART3 83
#define ZOOM_UART 95 /* Only on zoom2/3 */
/* This is only used by 8250.c for omap1510 */
/*
- * This file contains the address data for various TI816X modules.
+ * This file contains the address data for various TI81XX modules.
*
* Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
*
* GNU General Public License for more details.
*/
-#ifndef __ASM_ARCH_TI816X_H
-#define __ASM_ARCH_TI816X_H
+#ifndef __ASM_ARCH_TI81XX_H
+#define __ASM_ARCH_TI81XX_H
-#define L4_SLOW_TI816X_BASE 0x48000000
+#define L4_SLOW_TI81XX_BASE 0x48000000
-#define TI816X_SCM_BASE 0x48140000
-#define TI816X_CTRL_BASE TI816X_SCM_BASE
-#define TI816X_PRCM_BASE 0x48180000
+#define TI81XX_SCM_BASE 0x48140000
+#define TI81XX_CTRL_BASE TI81XX_SCM_BASE
+#define TI81XX_PRCM_BASE 0x48180000
-#define TI816X_ARM_INTC_BASE 0x48200000
+#define TI81XX_ARM_INTC_BASE 0x48200000
-#endif /* __ASM_ARCH_TI816X_H */
+#endif /* __ASM_ARCH_TI81XX_H */
#define DEBUG_LL_ZOOM(mach) \
_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
-#define DEBUG_LL_TI816X(p, mach) \
- _DEBUG_LL_ENTRY(mach, TI816X_UART##p##_BASE, OMAP_PORT_SHIFT, \
- TI816XUART##p)
+#define DEBUG_LL_TI81XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ TI81XXUART##p)
static inline void __arch_decomp_setup(unsigned long arch_id)
{
DEBUG_LL_ZOOM(omap_zoom3);
/* TI8168 base boards using UART3 */
- DEBUG_LL_TI816X(3, ti8168evm);
+ DEBUG_LL_TI81XX(3, ti8168evm);
+
+ /* TI8148 base boards using UART1 */
+ DEBUG_LL_TI81XX(1, ti8148evm);
} while (0);
}
extern void am35x_musb_phy_power(u8 on);
extern void am35x_musb_clear_irq(void);
extern void am35x_set_mode(u8 musb_mode);
+extern void ti81xx_musb_phy_power(u8 on);
/*
* FIXME correct answer depends on hmc_mode,
#define CONF2_OTGPWRDN (1 << 2)
#define CONF2_DATPOL (1 << 1)
+/* TI81XX specific definitions */
+#define USBCTRL0 0x620
+#define USBSTAT0 0x624
+
+/* TI816X PHY controls bits */
+#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
+#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
+
+/* TI814X PHY controls bits */
+#define USBPHY_CM_PWRDN (1 << 0)
+#define USBPHY_OTG_PWRDN (1 << 1)
+#define USBPHY_CHGDET_DIS (1 << 2)
+#define USBPHY_CHGDET_RSTRT (1 << 3)
+#define USBPHY_SRCONDM (1 << 4)
+#define USBPHY_SINKONDP (1 << 5)
+#define USBPHY_CHGISINK_EN (1 << 6)
+#define USBPHY_CHGVSRC_EN (1 << 7)
+#define USBPHY_DMPULLUP (1 << 8)
+#define USBPHY_DPPULLUP (1 << 9)
+#define USBPHY_CDET_EXTCTL (1 << 10)
+#define USBPHY_GPIO_MODE (1 << 12)
+#define USBPHY_DPOPBUFCTL (1 << 13)
+#define USBPHY_DMOPBUFCTL (1 << 14)
+#define USBPHY_DPINPUT (1 << 15)
+#define USBPHY_DMINPUT (1 << 16)
+#define USBPHY_DPGPIO_PD (1 << 17)
+#define USBPHY_DMGPIO_PD (1 << 18)
+#define USBPHY_OTGVDET_EN (1 << 19)
+#define USBPHY_OTGSESSEND_EN (1 << 20)
+#define USBPHY_DATA_POLARITY (1 << 23)
+
#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
u32 omap1_usb1_init(unsigned nwires);
+++ /dev/null
-/*
- * Common io.c file
- * This file is created by Russell King <rmk+kernel@arm.linux.org.uk>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/omap7xx.h>
-#include <plat/omap1510.h>
-#include <plat/omap16xx.h>
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-
-#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz)))
-#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst)))
-
-static int initialized;
-
-/*
- * Intercept ioremap() requests for addresses in our fixed mapping regions.
- */
-void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
-{
-
- WARN(!initialized, "Do not use ioremap before init_early\n");
-
-#ifdef CONFIG_ARCH_OMAP1
- if (cpu_class_is_omap1()) {
- if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
- return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
- }
- if (cpu_is_omap7xx()) {
- if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE))
- return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START);
-
- if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE))
- return XLATE(p, OMAP7XX_DSPREG_BASE,
- OMAP7XX_DSPREG_START);
- }
- if (cpu_is_omap15xx()) {
- if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))
- return XLATE(p, OMAP1510_DSP_BASE, OMAP1510_DSP_START);
-
- if (BETWEEN(p, OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_SIZE))
- return XLATE(p, OMAP1510_DSPREG_BASE,
- OMAP1510_DSPREG_START);
- }
- if (cpu_is_omap16xx()) {
- if (BETWEEN(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_SIZE))
- return XLATE(p, OMAP16XX_DSP_BASE, OMAP16XX_DSP_START);
-
- if (BETWEEN(p, OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_SIZE))
- return XLATE(p, OMAP16XX_DSPREG_BASE,
- OMAP16XX_DSPREG_START);
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP2
- if (cpu_is_omap24xx()) {
- if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE))
- return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT);
- if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE))
- return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
- }
- if (cpu_is_omap2420()) {
- if (BETWEEN(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_SIZE))
- return XLATE(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_VIRT);
- if (BETWEEN(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE))
- return XLATE(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE);
- if (BETWEEN(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_SIZE))
- return XLATE(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_VIRT);
- }
- if (cpu_is_omap2430()) {
- if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
- return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT);
- if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE))
- return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
- if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE))
- return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT);
- if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE))
- return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT);
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP3
- if (cpu_is_ti816x()) {
- if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
- return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
- } else if (cpu_is_omap34xx()) {
- if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE))
- return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
- if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
- return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
- if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE))
- return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT);
- if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE))
- return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT);
- if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE))
- return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT);
- if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE))
- return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT);
- if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE))
- return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- if (cpu_is_omap44xx()) {
- if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE))
- return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
- if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
- return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
- if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
- return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
- if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE))
- return XLATE(p, OMAP44XX_EMIF1_PHYS, \
- OMAP44XX_EMIF1_VIRT);
- if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE))
- return XLATE(p, OMAP44XX_EMIF2_PHYS, \
- OMAP44XX_EMIF2_VIRT);
- if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE))
- return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT);
- if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
- return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
- if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
- return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
- }
-#endif
- return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
-}
-EXPORT_SYMBOL(omap_ioremap);
-
-void omap_iounmap(volatile void __iomem *addr)
-{
- unsigned long virt = (unsigned long)addr;
-
- if (virt >= VMALLOC_START && virt < VMALLOC_END)
- __iounmap(addr);
-}
-EXPORT_SYMBOL(omap_iounmap);
-
-void __init omap_init_consistent_dma_size(void)
-{
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
- init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
-#endif
-}
-
-void __init omap_ioremap_init(void)
-{
- initialized++;
-}
default y
select ARM_VIC if !ARCH_EXYNOS4
select ARM_GIC if ARCH_EXYNOS4
+ select GIC_NON_BANKED if ARCH_EXYNOS4
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_GPIO_TRACK
config SAMSUNG_GPIO_EXTRA
int "Number of additional GPIO pins"
+ default 128 if SAMSUNG_GPIO_EXTRA128
+ default 64 if SAMSUNG_GPIO_EXTRA64
default 0
help
Use additional GPIO space in addition to the GPIO's the SOC
provides. This allows expanding the GPIO space for use with
GPIO expanders.
+config SAMSUNG_GPIO_EXTRA64
+ bool
+
+config SAMSUNG_GPIO_EXTRA128
+ bool
+
config S3C_GPIO_SPACE
int "Space between gpio banks"
default 0
{
if (mode == 's') {
/* software reset, Jump into ROM at address 0 */
- cpu_reset(0);
+ soft_restart(0);
} else {
/* hardware reset, Use on-chip reset capability */
sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+++ /dev/null
-/*
- * arch/arm/plat-spear/include/plat/vmalloc.h
- *
- * Defining Vmalloc area for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_VMALLOC_H
-#define __PLAT_VMALLOC_H
-
-#define VMALLOC_END 0xF0000000UL
-
-#endif /* __PLAT_VMALLOC_H */
+++ /dev/null
-/*
- * Author: <linux@telechips.com>
- * Created: June 10, 2008
- *
- * Copyright (C) 2000 Russell King.
- * Copyright (C) 2008-2009 Telechips
- *
- * Licensed under the terms of the GPL v2.
- */
-#define VMALLOC_END 0xf0000000UL
*/
extern rwlock_t vmlist_lock;
extern struct vm_struct *vmlist;
+extern __init void vm_area_add_early(struct vm_struct *vm);
extern __init void vm_area_register_early(struct vm_struct *vm, size_t align);
#ifdef CONFIG_SMP
}
EXPORT_SYMBOL(vm_map_ram);
+/**
+ * vm_area_add_early - add vmap area early during boot
+ * @vm: vm_struct to add
+ *
+ * This function is used to add fixed kernel vm area to vmlist before
+ * vmalloc_init() is called. @vm->addr, @vm->size, and @vm->flags
+ * should contain proper values and the other fields should be zero.
+ *
+ * DO NOT USE THIS FUNCTION UNLESS YOU KNOW WHAT YOU'RE DOING.
+ */
+void __init vm_area_add_early(struct vm_struct *vm)
+{
+ struct vm_struct *tmp, **p;
+
+ BUG_ON(vmap_initialized);
+ for (p = &vmlist; (tmp = *p) != NULL; p = &tmp->next) {
+ if (tmp->addr >= vm->addr) {
+ BUG_ON(tmp->addr < vm->addr + vm->size);
+ break;
+ } else
+ BUG_ON(tmp->addr + tmp->size > vm->addr);
+ }
+ vm->next = *p;
+ *p = vm;
+}
+
/**
* vm_area_register_early - register vmap area early during boot
* @vm: vm_struct to register
vm->addr = (void *)addr;
- vm->next = vmlist;
- vmlist = vm;
+ vm_area_add_early(vm);
}
void __init vmalloc_init(void)
projects / karo-tx-linux.git / commitdiff