extern void _tlbie(unsigned long va); /* invalidate a TLB entry */
extern void _tlbia(void); /* invalidate all TLB entries */
+
+/*
+ * tlb_skip size stores actual number skipped TLBs from TLB0 - every directy TLB
+ * mapping has to increase tlb_skip size.
+ */
+extern u32 tlb_skip;
# endif /* __ASSEMBLY__ */
/*
*/
# define MICROBLAZE_TLB_SIZE 64
-# define MICROBLAZE_TLB_SKIP 2
+
+/* For cases when you want to skip some TLB entries */
+# define MICROBLAZE_TLB_SKIP 0
+
+/* Use the last TLB for temporary access to LMB */
+# define MICROBLAZE_LMB_TLB_ID 63
/*
* TLB entries are defined by a "high" tag portion and a "low" data
base_addr);
base_addr = (u32) ioremap(base_addr, PAGE_SIZE);
printk(KERN_CONT "0x%x\n", base_addr);
+
+ /*
+ * Early console is on the top of skipped TLB entries
+ * decrease tlb_skip size ensure that hardcoded TLB entry will be
+ * used by generic algorithm
+ * FIXME check if early console mapping is on the top by rereading
+ * TLB entry and compare baseaddr
+ * mts rtlbx, (tlb_skip - 1)
+ * nop
+ * mfs rX, rtlblo
+ * nop
+ * cmp rX, orig_base_addr
+ */
+ tlb_skip -= 1;
}
void __init disable_early_printk(void)
_invalidate:
mts rtlbx, r3
mts rtlbhi, r0 /* flush: ensure V is clear */
+ mts rtlblo, r0
bgtid r3, _invalidate /* loop for all entries */
addik r3, r3, -1
/* sync */
andi r4,r4,0xfffffc00 /* Mask off the real page number */
ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */
- /* TLB0 can be zeroes that's why we not setup it */
- beqi r9, jump_over
+ /*
+ * TLB0 is always used - check if is not zero (r9 stores TLB0 value)
+ * if is use TLB1 value and clear it (r10 stores TLB1 value)
+ */
+ bnei r9, tlb0_not_zero
+ add r9, r10, r0
+ add r10, r0, r0
+tlb0_not_zero:
/* look at the code below */
ori r30, r0, 0x200
bneid r29, 1f
addik r30, r30, 0x80
1:
- ori r11, r30, 0
-
andi r3,r3,0xfffffc00 /* Mask off the effective page number */
ori r3,r3,(TLB_VALID)
- or r3, r3, r11
+ or r3, r3, r30
- mts rtlbx,r0 /* TLB slow 0 */
+ /* Load tlb_skip size value which is index to first unused TLB entry */
+ lwi r11, r0, TOPHYS(tlb_skip)
+ mts rtlbx,r11 /* TLB slow 0 */
mts rtlblo,r4 /* Load the data portion of the entry */
mts rtlbhi,r3 /* Load the tag portion of the entry */
-jump_over:
+ /* Increase tlb_skip size */
+ addik r11, r11, 1
+ swi r11, r0, TOPHYS(tlb_skip)
+
/* TLB1 can be zeroes that's why we not setup it */
beqi r10, jump_over2
bneid r29, 1f
addik r30, r30, 0x80
1:
- ori r12, r30, 0
-
addk r4, r4, r9 /* previous addr + TLB0 size */
addk r3, r3, r9
andi r3,r3,0xfffffc00 /* Mask off the effective page number */
ori r3,r3,(TLB_VALID)
- or r3, r3, r12
+ or r3, r3, r30
- ori r6,r0,1 /* TLB slot 1 */
- mts rtlbx,r6
+ lwi r11, r0, TOPHYS(tlb_skip)
+ mts rtlbx, r11 /* r11 is used from TLB0 */
mts rtlblo,r4 /* Load the data portion of the entry */
mts rtlbhi,r3 /* Load the tag portion of the entry */
+ /* Increase tlb_skip size */
+ addik r11, r11, 1
+ swi r11, r0, TOPHYS(tlb_skip)
+
jump_over2:
/*
* Load a TLB entry for LMB, since we need access to
* the exception vectors, using a 4k real==virtual mapping.
*/
- ori r6,r0,3 /* TLB slot 3 */
+ /* Use temporary TLB_ID for LMB - clear this temporary mapping later */
+ ori r6, r0, MICROBLAZE_LMB_TLB_ID
mts rtlbx,r6
ori r4,r0,(TLB_WR | TLB_EX)
/* Load up the kernel context */
kernel_load_context:
- # Keep entry 0 and 1 valid. Entry 3 mapped to LMB can go away.
- ori r5,r0,3
+ ori r5, r0, MICROBLAZE_LMB_TLB_ID
mts rtlbx,r5
nop
mts rtlbhi,r0
* Upon exit, we reload everything and RFI.
* A common place to load the TLB.
*/
+.section .data
+.align 4
+.global tlb_skip
+ tlb_skip:
+ .long MICROBLAZE_TLB_SKIP
tlb_index:
/* MS: storing last used tlb index */
- .long (MICROBLAZE_TLB_SKIP - 1)
+ .long MICROBLAZE_TLB_SIZE/2
+.previous
finish_tlb_load:
/* MS: load the last used TLB index. */
lwi r5, r0, TOPHYS(tlb_index)
ori r6, r0, 1
cmp r31, r5, r6
blti r31, ex12
- addik r5, r6, MICROBLAZE_TLB_SKIP - 1
+ lwi r5, r0, TOPHYS(tlb_skip)
ex12:
/* MS: save back current TLB index */
swi r5, r0, TOPHYS(tlb_index)
.type _tlbia, @function
.align 4;
_tlbia:
- addik r12, r0, MICROBLAZE_TLB_SIZE - 1 /* flush all entries (63 - 3) */
+ lwi r12, r0, tlb_skip;
/* isync */
_tlbia_1:
mts rtlbx, r12
nop
mts rtlbhi, r0 /* flush: ensure V is clear */
nop
- addik r11, r12, -MICROBLAZE_TLB_SKIP
+ rsubi r11, r12, MICROBLAZE_TLB_SIZE - 1
bneid r11, _tlbia_1 /* loop for all entries */
- addik r12, r12, -1
+ addik r12, r12, 1
/* sync */
rtsd r15, 8
nop
* Load a TLB entry for the UART, so that microblaze_progress() can use
* the UARTs nice and early. We use a 4k real==virtual mapping.
*/
- ori r4, r0, 63
+ lwi r4, r0, tlb_skip
mts rtlbx, r4 /* TLB slot 63 */
or r4,r5,r0
nop
mts rtlbhi,r5 /* Load the tag portion of the entry */
nop
+
+ lwi r5, r0, tlb_skip
+ addik r5, r5, 1
+ swi r5, r0, tlb_skip
+
rtsd r15, 8
nop
return of_debugfs_root == NULL;
}
arch_initcall(microblaze_debugfs_init);
+
+static int __init debugfs_tlb(void)
+{
+ struct dentry *d;
+
+ if (!of_debugfs_root)
+ return -ENODEV;
+
+ d = debugfs_create_u32("tlb_skip", S_IRUGO, of_debugfs_root, &tlb_skip);
+ if (!d)
+ return -ENOMEM;
+}
+device_initcall(debugfs_tlb);
#endif
static int dflt_bus_notify(struct notifier_block *nb,