ARM: dts: imx6qdl-sabresd: Pass the hannstar panel compatible string

It is preferred to use the panel compatible string rather than passing the
LCD timings in the device tree.

So pass the "hannstar,hsd100pxn1" compatible string to describe
the LVDS panel on this board.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 0b5c4de74485c00685da3fdc75b2ab3b82761be1..5248e7bd2b06d200154c136bf01612be82d50de2 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -115,7 +115,7 @@
                mux-ext-port = <3>;
        };
 
-       backlight {
+       backlight_lvds: backlight-lvds {
                compatible = "pwm-backlight";
                pwms = <&pwm1 0 5000000>;
                brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -133,6 +133,17 @@
                        default-state = "on";
                };
        };
+
+       panel {
+               compatible = "hannstar,hsd100pxn1";
+               backlight = <&backlight_lvds>;
+
+               port {
+                       panel_in: endpoint {
+                               remote-endpoint = <&lvds0_out>;
+                       };
+               };
+       };
 };
 
 &audmux {
@@ -509,18 +520,11 @@
                fsl,data-width = <18>;
                status = "okay";
 
-               display-timings {
-                       native-mode = <&timing0>;
-                       timing0: hsd100pxn1 {
-                               clock-frequency = <65000000>;
-                               hactive = <1024>;
-                               vactive = <768>;
-                               hback-porch = <220>;
-                               hfront-porch = <40>;
-                               vback-porch = <21>;
-                               vfront-porch = <7>;
-                               hsync-len = <60>;
-                               vsync-len = <10>;
+               port@4 {
+                       reg = <4>;
+
+                       lvds0_out: endpoint {
+                               remote-endpoint = <&panel_in>;
                        };
                };
        };