]> git.karo-electronics.de Git - linux-beck.git/commitdiff
ARM: dts: imx6qdl: disable PWMs by default
authorPhilipp Zabel <p.zabel@pengutronix.de>
Mon, 9 Mar 2015 16:40:36 +0000 (17:40 +0100)
committerShawn Guo <shawn.guo@linaro.org>
Mon, 30 Mar 2015 08:43:34 +0000 (16:43 +0800)
Since PWMs are only useful if they are actually connected to an output pin,
let users enable them explicitly in their device trees where they should
also set up the pin configuration.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
arch/arm/boot/dts/imx6qdl.dtsi

index 82dd0051865a28f16a8cd1a3a974c99ddc727ad8..f74a8ded515f22b9985b8d48b370a45c34e9d88e 100644 (file)
                                clocks = <&clks IMX6QDL_CLK_IPG>,
                                         <&clks IMX6QDL_CLK_PWM1>;
                                clock-names = "ipg", "per";
+                               status = "disabled";
                        };
 
                        pwm2: pwm@02084000 {
                                clocks = <&clks IMX6QDL_CLK_IPG>,
                                         <&clks IMX6QDL_CLK_PWM2>;
                                clock-names = "ipg", "per";
+                               status = "disabled";
                        };
 
                        pwm3: pwm@02088000 {
                                clocks = <&clks IMX6QDL_CLK_IPG>,
                                         <&clks IMX6QDL_CLK_PWM3>;
                                clock-names = "ipg", "per";
+                               status = "disabled";
                        };
 
                        pwm4: pwm@0208c000 {
                                clocks = <&clks IMX6QDL_CLK_IPG>,
                                         <&clks IMX6QDL_CLK_PWM4>;
                                clock-names = "ipg", "per";
+                               status = "disabled";
                        };
 
                        can1: flexcan@02090000 {