dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changes

There are few existing user drivers of dw_dmac. They will break as soon as we
remove unused fields from struct dw_dma_slave. This patch focuses to fix these
user drivers to use dma_slave_config() routine.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>

diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 402a7bb726696b4091e15a4e367004e634295859..43c44e77d83c8ba265350b73cfc95efc7148c850 100644 (file)
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1353,7 +1353,6 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
                goto fail;
 
        slave->sdata.dma_dev = &dw_dmac0_device.dev;
-       slave->sdata.reg_width = DW_DMA_SLAVE_WIDTH_32BIT;
        slave->sdata.cfg_hi = (DWC_CFGH_SRC_PER(0)
                                | DWC_CFGH_DST_PER(1));
        slave->sdata.cfg_lo &= ~(DWC_CFGL_HS_DST_POL
@@ -2048,27 +2047,19 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data,
        /* Check if DMA slave interface for capture should be configured. */
        if (flags & AC97C_CAPTURE) {
                rx_dws->dma_dev = &dw_dmac0_device.dev;
-               rx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
                rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3);
                rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
                rx_dws->src_master = 0;
                rx_dws->dst_master = 1;
-               rx_dws->src_msize = DW_DMA_MSIZE_1;
-               rx_dws->dst_msize = DW_DMA_MSIZE_1;
-               rx_dws->fc = DW_DMA_FC_D_P2M;
        }
 
        /* Check if DMA slave interface for playback should be configured. */
        if (flags & AC97C_PLAYBACK) {
                tx_dws->dma_dev = &dw_dmac0_device.dev;
-               tx_dws->reg_width = DW_DMA_SLAVE_WIDTH_16BIT;
                tx_dws->cfg_hi = DWC_CFGH_DST_PER(4);
                tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
                tx_dws->src_master = 0;
                tx_dws->dst_master = 1;
-               tx_dws->src_msize = DW_DMA_MSIZE_1;
-               tx_dws->dst_msize = DW_DMA_MSIZE_1;
-               tx_dws->fc = DW_DMA_FC_D_M2P;
        }
 
        if (platform_device_add_data(pdev, data,
@@ -2138,14 +2129,10 @@ at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data)
        dws = &data->dws;
 
        dws->dma_dev = &dw_dmac0_device.dev;
-       dws->reg_width = DW_DMA_SLAVE_WIDTH_32BIT;
        dws->cfg_hi = DWC_CFGH_DST_PER(2);
        dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
        dws->src_master = 0;
        dws->dst_master = 1;
-       dws->src_msize = DW_DMA_MSIZE_1;
-       dws->dst_msize = DW_DMA_MSIZE_1;
-       dws->fc = DW_DMA_FC_D_M2P;
 
        if (platform_device_add_data(pdev, data,
                                sizeof(struct atmel_abdac_pdata)))

diff --git a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h
index a9b38967f70365309e98d04f85da2414808aa756..4bba58561d5c887a18ec0f4032fa507df5669c2a 100644 (file)
--- a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h
+++ b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h
@@ -14,11 +14,4 @@ struct mci_dma_data {
 #define        slave_data_ptr(s)       (&(s)->sdata)
 #define find_slave_dev(s)      ((s)->sdata.dma_dev)
 
-#define        setup_dma_addr(s, t, r) do {            \
-       if (s) {                                \
-               (s)->sdata.tx_reg = (t);        \
-               (s)->sdata.rx_reg = (r);        \
-       }                                       \
-} while (0)
-
 #endif /* __MACH_ATMEL_MCI_H */

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index fcfe1eb5acc8f421a1e10a3c387c3c139171ef4d..3ba865ddebc49e48b7dbab3583f18d91aae124ef 100644 (file)
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -24,6 +24,7 @@
 #include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
+#include <linux/types.h>
 
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdio.h>
@@ -173,6 +174,7 @@ struct atmel_mci {
 
        struct atmel_mci_dma    dma;
        struct dma_chan         *data_chan;
+       struct dma_slave_config dma_conf;
 
        u32                     cmd_status;
        u32                     data_status;
@@ -863,15 +865,16 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
 
        if (data->flags & MMC_DATA_READ) {
                direction = DMA_FROM_DEVICE;
-               slave_dirn = DMA_DEV_TO_MEM;
+               host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
        } else {
                direction = DMA_TO_DEVICE;
-               slave_dirn = DMA_MEM_TO_DEV;
+               host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
        }
 
        sglen = dma_map_sg(chan->device->dev, data->sg,
                        data->sg_len, direction);
 
+       dmaengine_slave_config(chan, &host->dma_conf);
        desc = chan->device->device_prep_slave_sg(chan,
                        data->sg, sglen, slave_dirn,
                        DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
@@ -1957,22 +1960,27 @@ static void atmci_configure_dma(struct atmel_mci *host)
        if (pdata && find_slave_dev(pdata->dma_slave)) {
                dma_cap_mask_t mask;
 
-               setup_dma_addr(pdata->dma_slave,
-                              host->mapbase + ATMCI_TDR,
-                              host->mapbase + ATMCI_RDR);
-
                /* Try to grab a DMA channel */
                dma_cap_zero(mask);
                dma_cap_set(DMA_SLAVE, mask);
                host->dma.chan =
                        dma_request_channel(mask, atmci_filter, pdata->dma_slave);
        }
-       if (!host->dma.chan)
+       if (!host->dma.chan) {
                dev_notice(&host->pdev->dev, "DMA not available, using PIO\n");
-       else
+       } else {
                dev_info(&host->pdev->dev,
                                        "Using %s for DMA transfers\n",
                                        dma_chan_name(host->dma.chan));
+
+               host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
+               host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+               host->dma_conf.src_maxburst = 1;
+               host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
+               host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+               host->dma_conf.dst_maxburst = 1;
+               host->dma_conf.device_fc = false;
+       }
 }
 
 static inline unsigned int atmci_get_version(struct atmel_mci *host)

diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c
index 4fa1dbd8ee8381e1fbc4260c779cfecdea1d1923..f7c2bb08055d039bb48d9d84901e3b002ed7537e 100644 (file)
--- a/sound/atmel/abdac.c
+++ b/sound/atmel/abdac.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/types.h>
 #include <linux/io.h>
 
 #include <sound/core.h>
@@ -467,15 +468,24 @@ static int __devinit atmel_abdac_probe(struct platform_device *pdev)
        snd_card_set_dev(card, &pdev->dev);
 
        if (pdata->dws.dma_dev) {
-               struct dw_dma_slave *dws = &pdata->dws;
                dma_cap_mask_t mask;
 
-               dws->tx_reg = regs->start + DAC_DATA;
-
                dma_cap_zero(mask);
                dma_cap_set(DMA_SLAVE, mask);
 
-               dac->dma.chan = dma_request_channel(mask, filter, dws);
+               dac->dma.chan = dma_request_channel(mask, filter, &pdata->dws);
+               if (dac->dma.chan) {
+                       struct dma_slave_config dma_conf = {
+                               .dst_addr = regs->start + DAC_DATA,
+                               .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+                               .src_maxburst = 1,
+                               .dst_maxburst = 1,
+                               .direction = DMA_MEM_TO_DEV,
+                               .device_fc = false,
+                       };
+
+                       dmaengine_slave_config(dac->dma.chan, &dma_conf);
+               }
        }
        if (!pdata->dws.dma_dev || !dac->dma.chan) {
                dev_dbg(&pdev->dev, "DMA not available\n");

diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c
index 61dade6983582ce415afdbe3cf88d208bb628c46..115313ef54d67e7d10cc6b6d4295a53bf49e340d 100644 (file)
--- a/sound/atmel/ac97c.c
+++ b/sound/atmel/ac97c.c
@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 #include <linux/gpio.h>
+#include <linux/types.h>
 #include <linux/io.h>
 
 #include <sound/core.h>
@@ -1014,16 +1015,28 @@ static int __devinit atmel_ac97c_probe(struct platform_device *pdev)
 
        if (cpu_is_at32ap7000()) {
                if (pdata->rx_dws.dma_dev) {
-                       struct dw_dma_slave *dws = &pdata->rx_dws;
                        dma_cap_mask_t mask;
 
-                       dws->rx_reg = regs->start + AC97C_CARHR + 2;
-
                        dma_cap_zero(mask);
                        dma_cap_set(DMA_SLAVE, mask);
 
                        chip->dma.rx_chan = dma_request_channel(mask, filter,
-                                                               dws);
+                                                               &pdata->rx_dws);
+                       if (chip->dma.rx_chan) {
+                               struct dma_slave_config dma_conf = {
+                                       .src_addr = regs->start + AC97C_CARHR +
+                                               2,
+                                       .src_addr_width =
+                                               DMA_SLAVE_BUSWIDTH_2_BYTES,
+                                       .src_maxburst = 1,
+                                       .dst_maxburst = 1,
+                                       .direction = DMA_DEV_TO_MEM,
+                                       .device_fc = false,
+                               };
+
+                               dmaengine_slave_config(chip->dma.rx_chan,
+                                               &dma_conf);
+                       }
 
                        dev_info(&chip->pdev->dev, "using %s for DMA RX\n",
                                dev_name(&chip->dma.rx_chan->dev->device));
@@ -1031,16 +1044,28 @@ static int __devinit atmel_ac97c_probe(struct platform_device *pdev)
                }
 
                if (pdata->tx_dws.dma_dev) {
-                       struct dw_dma_slave *dws = &pdata->tx_dws;
                        dma_cap_mask_t mask;
 
-                       dws->tx_reg = regs->start + AC97C_CATHR + 2;
-
                        dma_cap_zero(mask);
                        dma_cap_set(DMA_SLAVE, mask);
 
                        chip->dma.tx_chan = dma_request_channel(mask, filter,
-                                                               dws);
+                                                               &pdata->tx_dws);
+                       if (chip->dma.tx_chan) {
+                               struct dma_slave_config dma_conf = {
+                                       .dst_addr = regs->start + AC97C_CATHR +
+                                               2,
+                                       .dst_addr_width =
+                                               DMA_SLAVE_BUSWIDTH_2_BYTES,
+                                       .src_maxburst = 1,
+                                       .dst_maxburst = 1,
+                                       .direction = DMA_MEM_TO_DEV,
+                                       .device_fc = false,
+                               };
+
+                               dmaengine_slave_config(chip->dma.tx_chan,
+                                               &dma_conf);
+                       }
 
                        dev_info(&chip->pdev->dev, "using %s for DMA TX\n",
                                dev_name(&chip->dma.tx_chan->dev->device));