this is basically a port of Larry Fingers Patch for rtl8187se to rtl8192su.
also removed some dead code.
plus cosmetics.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
depends on PCI && WLAN && USB
select WIRELESS_EXT
select WEXT_PRIV
+ select EEPROM_93CX6
default N
---help---
#EXTRA_CFLAGS += -DMUTIPLE_BULK_OUT
r8192s_usb-objs := \
- r8180_93cx6.o \
r8192U_wx.o \
r8192S_phy.o \
r8192S_rtl6052.o \
+++ /dev/null
-/*
- This files contains card eeprom (93c46 or 93c56) programming routines,
- memory is addressed by 16 bits words.
-
- This is part of rtl8180 OpenSource driver.
- Copyright (C) Andrea Merello 2004 <andreamrl@tiscali.it>
- Released under the terms of GPL (General Public Licence)
-
- Parts of this driver are based on the GPL part of the
- official realtek driver.
-
- Parts of this driver are based on the rtl8180 driver skeleton
- from Patric Schenke & Andres Salomon.
-
- Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
-
- We want to tanks the Authors of those projects and the Ndiswrapper
- project Authors.
-*/
-
-#include "r8180_93cx6.h"
-
-void eprom_cs(struct net_device *dev, short bit)
-{
- if(bit)
- write_nic_byte_E(dev, EPROM_CMD,
- (1<<EPROM_CS_SHIFT) | \
- read_nic_byte_E(dev, EPROM_CMD)); //enable EPROM
- else
- write_nic_byte_E(dev, EPROM_CMD, read_nic_byte_E(dev, EPROM_CMD)\
- &~(1<<EPROM_CS_SHIFT)); //disable EPROM
-
- force_pci_posting(dev);
- udelay(EPROM_DELAY);
-}
-
-
-void eprom_ck_cycle(struct net_device *dev)
-{
- write_nic_byte_E(dev, EPROM_CMD,
- (1<<EPROM_CK_SHIFT) | read_nic_byte_E(dev,EPROM_CMD));
- force_pci_posting(dev);
- udelay(EPROM_DELAY);
- write_nic_byte_E(dev, EPROM_CMD,
- read_nic_byte_E(dev, EPROM_CMD) &~ (1<<EPROM_CK_SHIFT));
- force_pci_posting(dev);
- udelay(EPROM_DELAY);
-}
-
-
-void eprom_w(struct net_device *dev,short bit)
-{
- if(bit)
- write_nic_byte_E(dev, EPROM_CMD, (1<<EPROM_W_SHIFT) | \
- read_nic_byte_E(dev,EPROM_CMD));
- else
- write_nic_byte_E(dev, EPROM_CMD, read_nic_byte_E(dev,EPROM_CMD)\
- &~(1<<EPROM_W_SHIFT));
-
- force_pci_posting(dev);
- udelay(EPROM_DELAY);
-}
-
-
-short eprom_r(struct net_device *dev)
-{
- short bit;
-
- bit=(read_nic_byte_E(dev, EPROM_CMD) & (1<<EPROM_R_SHIFT) );
- udelay(EPROM_DELAY);
-
- if(bit) return 1;
- return 0;
-}
-
-
-void eprom_send_bits_string(struct net_device *dev, short b[], int len)
-{
- int i;
-
- for(i=0; i<len; i++){
- eprom_w(dev, b[i]);
- eprom_ck_cycle(dev);
- }
-}
-
-
-u32 eprom_read(struct net_device *dev, u32 addr)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- short read_cmd[]={1,1,0};
- short addr_str[8];
- int i;
- int addr_len;
- u32 ret;
-
- ret=0;
- //enable EPROM programming
- write_nic_byte_E(dev, EPROM_CMD,
- (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
- force_pci_posting(dev);
- udelay(EPROM_DELAY);
-
- if (priv->epromtype==EPROM_93c56){
- addr_str[7]=addr & 1;
- addr_str[6]=addr & (1<<1);
- addr_str[5]=addr & (1<<2);
- addr_str[4]=addr & (1<<3);
- addr_str[3]=addr & (1<<4);
- addr_str[2]=addr & (1<<5);
- addr_str[1]=addr & (1<<6);
- addr_str[0]=addr & (1<<7);
- addr_len=8;
- }else{
- addr_str[5]=addr & 1;
- addr_str[4]=addr & (1<<1);
- addr_str[3]=addr & (1<<2);
- addr_str[2]=addr & (1<<3);
- addr_str[1]=addr & (1<<4);
- addr_str[0]=addr & (1<<5);
- addr_len=6;
- }
- eprom_cs(dev, 1);
- eprom_ck_cycle(dev);
- eprom_send_bits_string(dev, read_cmd, 3);
- eprom_send_bits_string(dev, addr_str, addr_len);
-
- //keep chip pin D to low state while reading.
- //I'm unsure if it is necessary, but anyway shouldn't hurt
- eprom_w(dev, 0);
-
- for(i=0;i<16;i++){
- //eeprom needs a clk cycle between writing opcode&adr
- //and reading data. (eeprom outs a dummy 0)
- eprom_ck_cycle(dev);
- ret |= (eprom_r(dev)<<(15-i));
- }
-
- eprom_cs(dev, 0);
- eprom_ck_cycle(dev);
-
- //disable EPROM programming
- write_nic_byte_E(dev, EPROM_CMD,
- (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
- return ret;
-}
+++ /dev/null
-/*
- This is part of rtl8187 OpenSource driver
- Copyright (C) Andrea Merello 2004-2005 <andreamrl@tiscali.it>
- Released under the terms of GPL (General Public Licence)
-
- Parts of this driver are based on the GPL part of the official realtek driver
- Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
- Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
-
- We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
-*/
-
-/*This files contains card eeprom (93c46 or 93c56) programming routines*/
-/*memory is addressed by WORDS*/
-
-#include "r8192U.h"
-#include "r8192S_hw.h"
-
-#define EPROM_DELAY 10
-
-#define EPROM_ANAPARAM_ADDRLWORD 0xd
-#define EPROM_ANAPARAM_ADDRHWORD 0xe
-
-#define EPROM_RFCHIPID 0x6
-#define EPROM_TXPW_BASE 0x05
-#define EPROM_RFCHIPID_RTL8225U 5
-#define EPROM_RF_PARAM 0x4
-#define EPROM_CONFIG2 0xc
-
-#define EPROM_VERSION 0x1E
-#define MAC_ADR 0x7
-
-#define CIS 0x18
-
-#define EPROM_TXPW0 0x16
-#define EPROM_TXPW2 0x1b
-#define EPROM_TXPW1 0x3d
-
-
-u32 eprom_read(struct net_device *dev,u32 addr); //reads a 16 bits word
#include "r8192S_firmware.h"
+/* EEPROM defs for use with linux/eeprom_93cx6.h */
+#define RTL819X_EEPROM_CMD_READ (1 << 0)
+#define RTL819X_EEPROM_CMD_WRITE (1 << 1)
+#define RTL819X_EEPROM_CMD_CK (1 << 2)
+#define RTL819X_EEPROM_CMD_CS (1 << 3)
+
//#define RTL8192U
#define RTL819xU_MODULE_NAME "rtl819xU"
//added for HW security, john.0629
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/eeprom_93cx6.h>
#undef LOOP_TEST
#undef DUMP_RX
#include <asm/uaccess.h>
#include "r8192U.h"
-#include "r8180_93cx6.h" /* Card EEPROM */
#include "r8192U_wx.h"
#include "r8192S_rtl8225.h"
{{1,2,3,4,5,6,7,8,9,10,11,12,13,14},14} //For Global Domain. 1-11:active scan, 12-14 passive scan. //+YJ, 080626
};
+static void rtl819x_eeprom_register_read(struct eeprom_93cx6 *eeprom)
+{
+ struct net_device *dev = eeprom->data;
+ u8 reg = read_nic_byte(dev, EPROM_CMD);
+
+ eeprom->reg_data_in = reg & RTL819X_EEPROM_CMD_WRITE;
+ eeprom->reg_data_out = reg & RTL819X_EEPROM_CMD_READ;
+ eeprom->reg_data_clock = reg & RTL819X_EEPROM_CMD_CK;
+ eeprom->reg_chip_select = reg & RTL819X_EEPROM_CMD_CS;
+}
+
+static void rtl819x_eeprom_register_write(struct eeprom_93cx6 *eeprom)
+{
+ struct net_device *dev = eeprom->data;
+ u8 reg = 2 << 6;
+
+ if (eeprom->reg_data_in)
+ reg |= RTL819X_EEPROM_CMD_WRITE;
+ if (eeprom->reg_data_out)
+ reg |= RTL819X_EEPROM_CMD_READ;
+ if (eeprom->reg_data_clock)
+ reg |= RTL819X_EEPROM_CMD_CK;
+ if (eeprom->reg_chip_select)
+ reg |= RTL819X_EEPROM_CMD_CS;
+
+ write_nic_byte(dev, EPROM_CMD, reg);
+ read_nic_byte(dev, EPROM_CMD);
+ udelay(10);
+}
+
static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv)
{
int i, max_chan=-1, min_chan=-1;
//DMESG("TXTIMEOUT");
}
-
-/* this is only for debug */
-void dump_eprom(struct net_device *dev)
-{
- int i;
- for(i=0; i<63; i++)
- RT_TRACE(COMP_EPROM, "EEPROM addr %x : %x", i, eprom_read(dev,i));
-}
-
/* this is only for debug */
void rtl8192_dump_reg(struct net_device *dev)
{
//
// Created by Roger, 2008.10.21.
//
-void
-rtl8192SU_ReadAdapterInfo8192SUsb(struct net_device* dev)
+void rtl8192SU_ReadAdapterInfo8192SUsb(struct net_device* dev)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
- u16 i,usValue;
- u8 tmpU1b, tempval;
- u16 EEPROMId;
- u8 hwinfo[HWSET_MAX_SIZE_92S];
- u8 rf_path, index; // For EEPROM/EFUSE After V0.6_1117
-
+ struct r8192_priv *priv = ieee80211_priv(dev);
+ u16 i;
+ u8 tmpU1b, tempval;
+ u16 EEPROMId;
+ u8 hwinfo[HWSET_MAX_SIZE_92S];
+ u8 rf_path, index; // For EEPROM/EFUSE After V0.6_1117
+ struct eeprom_93cx6 eeprom;
+ u16 eeprom_val;
+
+ eeprom.data = dev;
+ eeprom.register_read = rtl819x_eeprom_register_read;
+ eeprom.register_write = rtl819x_eeprom_register_write;
+ if (priv->epromtype == EPROM_93c46)
+ eeprom.width = PCI_EEPROM_WIDTH_93C46;
+ else
+ eeprom.width = PCI_EEPROM_WIDTH_93C56;
RT_TRACE(COMP_INIT, "====> ReadAdapterInfo8192SUsb\n");
- //
- // <Roger_Note> The following operation are prevent Efuse leakage by turn on 2.5V.
- // 2008.11.25.
- //
+ /*
+ * The following operation are prevent Efuse leakage by turn on 2.5V..
+ */
tmpU1b = read_nic_byte(dev, EFUSE_TEST+3);
write_nic_byte(dev, EFUSE_TEST+3, tmpU1b|0x80);
- //PlatformStallExecution(1000);
mdelay(10);
write_nic_byte(dev, EFUSE_TEST+3, (tmpU1b&(~BIT7)));
priv->card_8192_version = (VERSION_8192S)((read_nic_dword(dev, PMC_FSM)>>16)&0xF);
RT_TRACE(COMP_INIT, "Chip Version ID: 0x%2x\n", priv->card_8192_version);
- switch(priv->card_8192_version)
- {
- case 0:
- RT_TRACE(COMP_INIT, "Chip Version ID: VERSION_8192S_ACUT.\n");
- break;
- case 1:
- RT_TRACE(COMP_INIT, "Chip Version ID: VERSION_8192S_BCUT.\n");
- break;
- case 2:
- RT_TRACE(COMP_INIT, "Chip Version ID: VERSION_8192S_CCUT.\n");
- break;
- default:
- RT_TRACE(COMP_INIT, "Unknown Chip Version!!\n");
- priv->card_8192_version = VERSION_8192S_BCUT;
- break;
+ switch (priv->card_8192_version) {
+ case 0:
+ RT_TRACE(COMP_INIT, "Chip Version ID: VERSION_8192S_ACUT.\n");
+ break;
+ case 1:
+ RT_TRACE(COMP_INIT, "Chip Version ID: VERSION_8192S_BCUT.\n");
+ break;
+ case 2:
+ RT_TRACE(COMP_INIT, "Chip Version ID: VERSION_8192S_CCUT.\n");
+ break;
+ default:
+ RT_TRACE(COMP_INIT, "Unknown Chip Version!!\n");
+ priv->card_8192_version = VERSION_8192S_BCUT;
+ break;
}
//if (IS_BOOT_FROM_EEPROM(Adapter))
// Read all Content from EEPROM or EFUSE.
for(i = 0; i < HWSET_MAX_SIZE_92S; i += 2)
{
- usValue = eprom_read(dev, (u16) (i>>1));
- *((u16*)(&hwinfo[i])) = usValue;
+ eeprom_93cx6_read(&eeprom, (u16) (i>>1), &eeprom_val);
+ *((u16 *)(&hwinfo[i])) = eeprom_val;
}
}
else if (!(priv->EepromOrEfuse))
init_timer(&priv->watch_dog_timer);
priv->watch_dog_timer.data = (unsigned long)dev;
priv->watch_dog_timer.function = watch_dog_timer_callback;
-
- //rtl8192_adapter_start(dev);
-#ifdef DEBUG_EPROM
- dump_eprom(dev);
-#endif
return 0;
}
projects / linux-beck.git / commitdiff