#include <bcmutils.h>
#include <aiutils.h>
+#include "wlc_types.h"
#include <sbdma.h>
#include <bcmdma.h>
#define D64_RX_FRM_STS_DSCRCNT 0x0f000000 /* no. of descriptors used - 1 */
#define D64_RX_FRM_STS_DATATYPE 0xf0000000 /* core-dependent data type */
+#define DMADDRWIDTH_30 30 /* 30-bit addressing capability */
+#define DMADDRWIDTH_32 32 /* 32-bit addressing capability */
+#define DMADDRWIDTH_63 63 /* 64-bit addressing capability */
+#define DMADDRWIDTH_64 64 /* 64-bit addressing capability */
+
+/* packet headroom necessary to accommodate the largest header in the system, (i.e TXOFF).
+ * By doing, we avoid the need to allocate an extra buffer for the header when bridging to WL.
+ * There is a compile time check in wlc.c which ensure that this value is at least as big
+ * as TXOFF. This value is used in dma_rxfill (dma.c).
+ */
+
+#define BCMEXTRAHDROOM 172
+
/* debug/trace */
#ifdef BCMDBG
#define DMA_ERROR(args) \
#define DMA_NONE(args)
+typedef unsigned long dmaaddr_t;
+#define PHYSADDRHI(_pa) (0)
+#define PHYSADDRHISET(_pa, _val)
+#define PHYSADDRLO(_pa) ((_pa))
+#define PHYSADDRLOSET(_pa, _val) \
+ do { \
+ (_pa) = (_val); \
+ } while (0)
+
#define d64txregs dregs.d64_u.txregs_64
#define d64rxregs dregs.d64_u.rxregs_64
#define txd64 dregs.d64_u.txd_64
#define R_SM(r) (*(r))
#define W_SM(r, v) (*(r) = (v))
+/* One physical DMA segment */
+typedef struct {
+ dmaaddr_t addr;
+ u32 length;
+} dma_seg_t;
+
+typedef struct {
+ void *oshdmah; /* Opaque handle for OSL to store its information */
+ uint origsize; /* Size of the virtual packet */
+ uint nsegs;
+ dma_seg_t segs[MAX_DMA_SEGS];
+} dma_seg_map_t;
+
/*
* DMA Descriptor
* Descriptors are only read by the hardware, never written back.
#define AC_COUNT 4
+/* Macros for doing definition and get/set of bitfields
+ * Usage example, e.g. a three-bit field (bits 4-6):
+ * #define <NAME>_M BITFIELD_MASK(3)
+ * #define <NAME>_S 4
+ * ...
+ * regval = R_REG(osh, ®s->regfoo);
+ * field = GFIELD(regval, <NAME>);
+ * regval = SFIELD(regval, <NAME>, 1);
+ * W_REG(osh, ®s->regfoo, regval);
+ */
+#define BITFIELD_MASK(width) \
+ (((unsigned)1 << (width)) - 1)
+#define GFIELD(val, field) \
+ (((val) >> field ## _S) & field ## _M)
+#define SFIELD(val, field, bits) \
+ (((val) & (~(field ## _M << field ## _S))) | \
+ ((unsigned)(bits) << field ## _S))
+
/* For managing scan result lists */
struct wlc_bss_list {
uint count;
#define EDCF_LONG_M BITFIELD_MASK(4)
#define EDCF_LFB_M BITFIELD_MASK(4)
+#define NFIFO 6 /* # tx/rx fifopairs */
+
#define WLC_WME_RETRY_SHORT_GET(wlc, ac) GFIELD(wlc->wme_retries[ac], EDCF_SHORT)
#define WLC_WME_RETRY_SFB_GET(wlc, ac) GFIELD(wlc->wme_retries[ac], EDCF_SFB)
#define WLC_WME_RETRY_LONG_GET(wlc, ac) GFIELD(wlc->wme_retries[ac], EDCF_LONG)
#define USB_BUS 5
#define SPI_BUS 6
-
#ifndef OFF
#define OFF 0
#endif
#define AUTO (-1) /* Auto = -1 */
-/* Bus types */
-#define SI_BUS 0 /* SOC Interconnect */
-#define PCI_BUS 1 /* PCI target */
-#define SDIO_BUS 3 /* SDIO target */
-#define JTAG_BUS 4 /* JTAG */
-#define USB_BUS 5 /* USB (does not support R/W REG) */
-#define SPI_BUS 6 /* gSPI target */
-#define RPC_BUS 7 /* RPC target */
-
-
-/* Defines for DMA Address Width - Shared between OSL and HNDDMA */
-#define DMADDR_MASK_32 0x0 /* Address mask for 32-bits */
-#define DMADDR_MASK_30 0xc0000000 /* Address mask for 30-bits */
-#define DMADDR_MASK_0 0xffffffff /* Address mask for 0-bits (hi-part) */
-
-#define DMADDRWIDTH_30 30 /* 30-bit addressing capability */
-#define DMADDRWIDTH_32 32 /* 32-bit addressing capability */
-#define DMADDRWIDTH_63 63 /* 64-bit addressing capability */
-#define DMADDRWIDTH_64 64 /* 64-bit addressing capability */
-
-#ifdef BCMDMA64OSL
-typedef struct {
- u32 loaddr;
- u32 hiaddr;
-} dma64addr_t;
-
-typedef dma64addr_t dmaaddr_t;
-#define PHYSADDRHI(_pa) ((_pa).hiaddr)
-#define PHYSADDRHISET(_pa, _val) \
- do { \
- (_pa).hiaddr = (_val); \
- } while (0)
-#define PHYSADDRLO(_pa) ((_pa).loaddr)
-#define PHYSADDRLOSET(_pa, _val) \
- do { \
- (_pa).loaddr = (_val); \
- } while (0)
-
-#else
-typedef unsigned long dmaaddr_t;
-#define PHYSADDRHI(_pa) (0)
-#define PHYSADDRHISET(_pa, _val)
-#define PHYSADDRLO(_pa) ((_pa))
-#define PHYSADDRLOSET(_pa, _val) \
- do { \
- (_pa) = (_val); \
- } while (0)
-#endif /* BCMDMA64OSL */
-
-/* One physical DMA segment */
-typedef struct {
- dmaaddr_t addr;
- u32 length;
-} dma_seg_t;
-
-#define MAX_DMA_SEGS 4
-
-typedef struct {
- void *oshdmah; /* Opaque handle for OSL to store its information */
- uint origsize; /* Size of the virtual packet */
- uint nsegs;
- dma_seg_t segs[MAX_DMA_SEGS];
-} dma_seg_map_t;
-
-/* packet headroom necessary to accommodate the largest header in the system, (i.e TXOFF).
- * By doing, we avoid the need to allocate an extra buffer for the header when bridging to WL.
- * There is a compile time check in wlc.c which ensure that this value is at least as big
- * as TXOFF. This value is used in dma_rxfill (dma.c).
- */
-
-#define BCMEXTRAHDROOM 172
-
-/* Macros for doing definition and get/set of bitfields
- * Usage example, e.g. a three-bit field (bits 4-6):
- * #define <NAME>_M BITFIELD_MASK(3)
- * #define <NAME>_S 4
- * ...
- * regval = R_REG(osh, ®s->regfoo);
- * field = GFIELD(regval, <NAME>);
- * regval = SFIELD(regval, <NAME>, 1);
- * W_REG(osh, ®s->regfoo, regval);
- */
-#define BITFIELD_MASK(width) \
- (((unsigned)1 << (width)) - 1)
-#define GFIELD(val, field) \
- (((val) >> field ## _S) & field ## _M)
-#define SFIELD(val, field, bits) \
- (((val) & (~(field ## _M << field ## _S))) | \
- ((unsigned)(bits) << field ## _S))
-
/*
* Priority definitions according 802.1D
*/
#define PRIO_8021D_VI 5
#define PRIO_8021D_VO 6
#define PRIO_8021D_NC 7
+
#define MAXPRIO 7
#define NUMPRIO (MAXPRIO + 1)
-/* Max. nvram variable table size */
-#define MAXSZ_NVRAM_VARS 4096
-
-/* handle forward declaration */
-struct wl_info;
-struct wlc_bsscfg;
-
#define WL_NUMRATES 16 /* max # of rates in a rateset */
+
typedef struct wl_rateset {
u32 count; /* # rates in this set */
u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
#define WL_ERROR_VAL 0x00000001
#define WL_TRACE_VAL 0x00000002
-#define NFIFO 6 /* # tx/rx fifopairs */
-
#define PM_OFF 0
#define PM_MAX 1
#define PM_FAST 2
-/* band range returned by band_range iovar */
-#define WL_CHAN_FREQ_RANGE_2G 0
-#define WL_CHAN_FREQ_RANGE_5GL 1
-#define WL_CHAN_FREQ_RANGE_5GM 2
-#define WL_CHAN_FREQ_RANGE_5GH 3
-
#endif /* _bcmdefs_h_ */
projects / linux-beck.git / commitdiff