del_timer(&motor_off_timer);
ReqCnt = 0;
- ReqCmd = CURRENT->cmd;
+ ReqCmd = rq_data_dir(CURRENT);
ReqBlock = CURRENT->sector;
ReqBuffer = CURRENT->buffer;
setup_req_params(drive);
a choice of command end or some data which is ready to be collected */
/* I think we have to transfer data while the interrupt line is on and its
not any other type of interrupt */
- if (CURRENT->cmd == WRITE) {
+ if (rq_data_dir(CURRENT) == WRITE) {
extern void hdc63463_writedma(void);
if ((hdc63463_dataleft <= 0) && (!(mfm_status & STAT_CED))) {
printk("mfm_rw_intr: Apparent DMA write request when no more to DMA\n");
raw_cmd.head = start_head;
raw_cmd.cylinder = track / p->heads;
raw_cmd.cmdtype = CURRENT->cmd;
- raw_cmd.cmdcode = CURRENT->cmd == WRITE ? CMD_WD : CMD_RD;
+ raw_cmd.cmdcode = rq_data_dir(CURRENT) == WRITE ? CMD_WD : CMD_RD;
raw_cmd.cmddata[0] = dev + 1; /* DAG: +1 to get US */
raw_cmd.cmddata[1] = raw_cmd.head;
raw_cmd.cmddata[2] = raw_cmd.cylinder >> 8;
hdc63463_dataleft = nsect * 256; /* Better way? */
DBG("mfm%c: %sing: CHS=%d/%d/%d, sectors=%d, buffer=0x%08lx (%p)\n",
- raw_cmd.dev + 'a', (CURRENT->cmd == READ) ? "read" : "writ",
+ raw_cmd.dev + 'a', rq_data_dir(CURRENT) == READ ? "read" : "writ",
raw_cmd.cylinder,
raw_cmd.head,
raw_cmd.sector, nsect, (unsigned long) Copy_buffer, CURRENT);
DBG("mfm_request: block after offset=%d\n", block);
- if (CURRENT->cmd != READ && CURRENT->cmd != WRITE) {
- printk("unknown mfm-command %d\n", CURRENT->cmd);
- end_request(CURRENT, 0);
- Busy = 0;
- printk("mfm: continue 4\n");
- continue;
- }
issue_request(block, nsect, CURRENT);
break;
#ifdef DEBUG
printk("fd: sector %ld + %d requested for %s\n",
CURRENT->sector,cnt,
- (CURRENT->cmd==READ)?"read":"write");
+ (rq_data_dir(CURRENT) == READ) ? "read" : "write");
#endif
block = CURRENT->sector + cnt;
if ((int)block > floppy->blocks) {
/*
* We always wait for result of write, for now. It would be nice to make it optional
* in future
- * if ((req->cmd == WRITE) && (lo->flags & NBD_WRITE_NOCHK))
+ * if ((rq_data_dir(req) == WRITE) && (lo->flags & NBD_WRITE_NOCHK))
* { printk( "Warning: Ignoring result!\n"); nbd_end_request( req ); }
*/
static int current_valid(void)
{
return CURRENT &&
- CURRENT->cmd == READ &&
+ rq_data_dir(CURRENT) == READ &&
CURRENT->sector != -1;
}
if (!req)
return;
- if (req->cmd != READ) {
+ if (rq_data_dir(req) != READ) {
debug(("Non-read command %d on cdrom\n", req->cmd));
end_request(req, 0);
continue;
if (req->sector == -1)
goto out;
- if (req->cmd != READ) {
+ if (rq_data_dir(req) != READ) {
printk("GSCD: bad cmd %u\n", rq_data_dir(req));
end_request(req, 0);
goto repeat;
xtrace(REQUEST, "do_request() (%lu + %lu)\n",
req->sector, req->nr_sectors);
- if (req->cmd != READ) {
+ if (rq_data_dir(req) != READ) {
xwarn("do_request(): non-read command to cd!!\n");
xtrace(REQUEST, "end_request(0): write\n");
end_request(req, 0);
static int current_valid(void)
{
return CURRENT &&
- CURRENT->cmd == READ &&
+ rq_data_dir(CURRENT) == READ &&
CURRENT->sector != -1;
}
static int current_valid(void)
{
return CURRENT &&
- CURRENT->cmd == READ &&
+ rq_data_dir(CURRENT) == READ &&
CURRENT->sector != -1;
}
cyl = track / disk->head;
#ifdef DEBUG
printk("%s: %sing: CHS=%d/%d/%d, sectors=%d, buffer=%p\n",
- req->rq_disk->disk_name, (req->cmd == READ)?"read":"writ",
+ req->rq_disk->disk_name,
+ req_data_dir(req) == READ ? "read" : "writ",
cyl, head, sec, nsect, req->buffer);
#endif
if (blk_fs_request(req)) {