#include <linux/irq.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/phy.h>
#include <asm/cacheflush.h>
* Define the fixed address of the FEC hardware.
*/
#if defined(CONFIG_M5272)
-#define HAVE_mii_link_interrupt
static unsigned char fec_mac_default[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
#endif
#endif /* CONFIG_M5272 */
-/* Forward declarations of some structures to support different PHYs */
-
-typedef struct {
- uint mii_data;
- void (*funct)(uint mii_reg, struct net_device *dev);
-} phy_cmd_t;
-
-typedef struct {
- uint id;
- char *name;
-
- const phy_cmd_t *config;
- const phy_cmd_t *startup;
- const phy_cmd_t *ack_int;
- const phy_cmd_t *shutdown;
-} phy_info_t;
-
/* The number of Tx and Rx buffers. These are allocated from the page
* pool. The code may assume these are power of two, so it it best
* to keep them that size.
uint tx_full;
/* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
spinlock_t hw_lock;
- /* hold while accessing the mii_list_t() elements */
- spinlock_t mii_lock;
-
- uint phy_id;
- uint phy_id_done;
- uint phy_status;
- uint phy_speed;
- phy_info_t const *phy;
- struct work_struct phy_task;
- uint sequence_done;
- uint mii_phy_task_queued;
+ struct platform_device *pdev;
- uint phy_addr;
+ int opened;
+ /* Phylib and MDIO interface */
+ struct mii_bus *mii_bus;
+ struct phy_device *phy_dev;
+ int mii_timeout;
+ uint phy_speed;
int index;
- int opened;
int link;
- int old_link;
int full_duplex;
};
-static void fec_enet_mii(struct net_device *dev);
static irqreturn_t fec_enet_interrupt(int irq, void * dev_id);
static void fec_enet_tx(struct net_device *dev);
static void fec_enet_rx(struct net_device *dev);
static void fec_restart(struct net_device *dev, int duplex);
static void fec_stop(struct net_device *dev);
+/* FEC MII MMFR bits definition */
+#define FEC_MMFR_ST (1 << 30)
+#define FEC_MMFR_OP_READ (2 << 28)
+#define FEC_MMFR_OP_WRITE (1 << 28)
+#define FEC_MMFR_PA(v) ((v & 0x1f) << 23)
+#define FEC_MMFR_RA(v) ((v & 0x1f) << 18)
+#define FEC_MMFR_TA (2 << 16)
+#define FEC_MMFR_DATA(v) (v & 0xffff)
-/* MII processing. We keep this as simple as possible. Requests are
- * placed on the list (if there is room). When the request is finished
- * by the MII, an optional function may be called.
- */
-typedef struct mii_list {
- uint mii_regval;
- void (*mii_func)(uint val, struct net_device *dev);
- struct mii_list *mii_next;
-} mii_list_t;
-
-#define NMII 20
-static mii_list_t mii_cmds[NMII];
-static mii_list_t *mii_free;
-static mii_list_t *mii_head;
-static mii_list_t *mii_tail;
-
-static int mii_queue(struct net_device *dev, int request,
- void (*func)(uint, struct net_device *));
-
-/* Make MII read/write commands for the FEC */
-#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18))
-#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | \
- (VAL & 0xffff))
-#define mk_mii_end 0
+#define FEC_MII_TIMEOUT 10000
/* Transmitter timeout */
#define TX_TIMEOUT (2 * HZ)
-/* Register definitions for the PHY */
-
-#define MII_REG_CR 0 /* Control Register */
-#define MII_REG_SR 1 /* Status Register */
-#define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */
-#define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */
-#define MII_REG_ANAR 4 /* A-N Advertisement Register */
-#define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */
-#define MII_REG_ANER 6 /* A-N Expansion Register */
-#define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */
-#define MII_REG_ANLPRNPR 8 /* A-N Link Partner Received Next Page Reg. */
-
-/* values for phy_status */
-
-#define PHY_CONF_ANE 0x0001 /* 1 auto-negotiation enabled */
-#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */
-#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */
-#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */
-#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */
-#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */
-#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */
-
-#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */
-#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */
-#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */
-#define PHY_STAT_SPMASK 0xf000 /* mask for speed */
-#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */
-#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */
-#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */
-#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */
-
-
static int
fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
ret = IRQ_HANDLED;
fec_enet_tx(dev);
}
-
- if (int_events & FEC_ENET_MII) {
- ret = IRQ_HANDLED;
- fec_enet_mii(dev);
- }
-
} while (int_events);
return ret;
spin_unlock(&fep->hw_lock);
}
-/* called from interrupt context */
-static void
-fec_enet_mii(struct net_device *dev)
-{
- struct fec_enet_private *fep;
- mii_list_t *mip;
-
- fep = netdev_priv(dev);
- spin_lock(&fep->mii_lock);
-
- if ((mip = mii_head) == NULL) {
- printk("MII and no head!\n");
- goto unlock;
- }
-
- if (mip->mii_func != NULL)
- (*(mip->mii_func))(readl(fep->hwp + FEC_MII_DATA), dev);
-
- mii_head = mip->mii_next;
- mip->mii_next = mii_free;
- mii_free = mip;
-
- if ((mip = mii_head) != NULL)
- writel(mip->mii_regval, fep->hwp + FEC_MII_DATA);
-
-unlock:
- spin_unlock(&fep->mii_lock);
-}
-
-static int
-mii_queue_unlocked(struct net_device *dev, int regval,
- void (*func)(uint, struct net_device *))
+/* ------------------------------------------------------------------------- */
+#ifdef CONFIG_M5272
+static void __inline__ fec_get_mac(struct net_device *dev)
{
- struct fec_enet_private *fep;
- mii_list_t *mip;
- int retval;
-
- /* Add PHY address to register command */
- fep = netdev_priv(dev);
+ struct fec_enet_private *fep = netdev_priv(dev);
+ unsigned char *iap, tmpaddr[ETH_ALEN];
- regval |= fep->phy_addr << 23;
- retval = 0;
-
- if ((mip = mii_free) != NULL) {
- mii_free = mip->mii_next;
- mip->mii_regval = regval;
- mip->mii_func = func;
- mip->mii_next = NULL;
- if (mii_head) {
- mii_tail->mii_next = mip;
- mii_tail = mip;
- } else {
- mii_head = mii_tail = mip;
- writel(regval, fep->hwp + FEC_MII_DATA);
- }
+ if (FEC_FLASHMAC) {
+ /*
+ * Get MAC address from FLASH.
+ * If it is all 1's or 0's, use the default.
+ */
+ iap = (unsigned char *)FEC_FLASHMAC;
+ if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
+ (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
+ iap = fec_mac_default;
+ if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
+ (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
+ iap = fec_mac_default;
} else {
- retval = 1;
+ *((unsigned long *) &tmpaddr[0]) = readl(fep->hwp + FEC_ADDR_LOW);
+ *((unsigned short *) &tmpaddr[4]) = (readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
+ iap = &tmpaddr[0];
}
- return retval;
-}
-
-static int
-mii_queue(struct net_device *dev, int regval,
- void (*func)(uint, struct net_device *))
-{
- struct fec_enet_private *fep;
- unsigned long flags;
- int retval;
- fep = netdev_priv(dev);
- spin_lock_irqsave(&fep->mii_lock, flags);
- retval = mii_queue_unlocked(dev, regval, func);
- spin_unlock_irqrestore(&fep->mii_lock, flags);
- return retval;
-}
-
-static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
-{
- if(!c)
- return;
+ memcpy(dev->dev_addr, iap, ETH_ALEN);
- for (; c->mii_data != mk_mii_end; c++)
- mii_queue(dev, c->mii_data, c->funct);
+ /* Adjust MAC if using default MAC address */
+ if (iap == fec_mac_default)
+ dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
}
+#endif
-static void mii_parse_sr(uint mii_reg, struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile uint *s = &(fep->phy_status);
- uint status;
-
- status = *s & ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC);
-
- if (mii_reg & 0x0004)
- status |= PHY_STAT_LINK;
- if (mii_reg & 0x0010)
- status |= PHY_STAT_FAULT;
- if (mii_reg & 0x0020)
- status |= PHY_STAT_ANC;
- *s = status;
-}
+/* ------------------------------------------------------------------------- */
-static void mii_parse_cr(uint mii_reg, struct net_device *dev)
+/*
+ * Phy section
+ */
+static void fec_enet_adjust_link(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
- volatile uint *s = &(fep->phy_status);
- uint status;
-
- status = *s & ~(PHY_CONF_ANE | PHY_CONF_LOOP);
-
- if (mii_reg & 0x1000)
- status |= PHY_CONF_ANE;
- if (mii_reg & 0x4000)
- status |= PHY_CONF_LOOP;
- *s = status;
-}
+ struct phy_device *phy_dev = fep->phy_dev;
+ unsigned long flags;
-static void mii_parse_anar(uint mii_reg, struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile uint *s = &(fep->phy_status);
- uint status;
-
- status = *s & ~(PHY_CONF_SPMASK);
-
- if (mii_reg & 0x0020)
- status |= PHY_CONF_10HDX;
- if (mii_reg & 0x0040)
- status |= PHY_CONF_10FDX;
- if (mii_reg & 0x0080)
- status |= PHY_CONF_100HDX;
- if (mii_reg & 0x00100)
- status |= PHY_CONF_100FDX;
- *s = status;
-}
+ int status_change = 0;
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT970 is used by many boards */
+ spin_lock_irqsave(&fep->hw_lock, flags);
-#define MII_LXT970_MIRROR 16 /* Mirror register */
-#define MII_LXT970_IER 17 /* Interrupt Enable Register */
-#define MII_LXT970_ISR 18 /* Interrupt Status Register */
-#define MII_LXT970_CONFIG 19 /* Configuration Register */
-#define MII_LXT970_CSR 20 /* Chip Status Register */
+ /* Prevent a state halted on mii error */
+ if (fep->mii_timeout && phy_dev->state == PHY_HALTED) {
+ phy_dev->state = PHY_RESUMING;
+ goto spin_unlock;
+ }
-static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile uint *s = &(fep->phy_status);
- uint status;
+ /* Duplex link change */
+ if (phy_dev->link) {
+ if (fep->full_duplex != phy_dev->duplex) {
+ fec_restart(dev, phy_dev->duplex);
+ status_change = 1;
+ }
+ }
- status = *s & ~(PHY_STAT_SPMASK);
- if (mii_reg & 0x0800) {
- if (mii_reg & 0x1000)
- status |= PHY_STAT_100FDX;
+ /* Link on or off change */
+ if (phy_dev->link != fep->link) {
+ fep->link = phy_dev->link;
+ if (phy_dev->link)
+ fec_restart(dev, phy_dev->duplex);
else
- status |= PHY_STAT_100HDX;
- } else {
- if (mii_reg & 0x1000)
- status |= PHY_STAT_10FDX;
- else
- status |= PHY_STAT_10HDX;
+ fec_stop(dev);
+ status_change = 1;
}
- *s = status;
-}
-
-static phy_cmd_t const phy_cmd_lxt970_config[] = {
- { mk_mii_read(MII_REG_CR), mii_parse_cr },
- { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_lxt970_startup[] = { /* enable interrupts */
- { mk_mii_write(MII_LXT970_IER, 0x0002), NULL },
- { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_lxt970_ack_int[] = {
- /* read SR and ISR to acknowledge */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- { mk_mii_read(MII_LXT970_ISR), NULL },
-
- /* find out the current status */
- { mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr },
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_lxt970_shutdown[] = { /* disable interrupts */
- { mk_mii_write(MII_LXT970_IER, 0x0000), NULL },
- { mk_mii_end, }
- };
-static phy_info_t const phy_info_lxt970 = {
- .id = 0x07810000,
- .name = "LXT970",
- .config = phy_cmd_lxt970_config,
- .startup = phy_cmd_lxt970_startup,
- .ack_int = phy_cmd_lxt970_ack_int,
- .shutdown = phy_cmd_lxt970_shutdown
-};
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT971 is used on some of my custom boards */
-
-/* register definitions for the 971 */
+spin_unlock:
+ spin_unlock_irqrestore(&fep->hw_lock, flags);
-#define MII_LXT971_PCR 16 /* Port Control Register */
-#define MII_LXT971_SR2 17 /* Status Register 2 */
-#define MII_LXT971_IER 18 /* Interrupt Enable Register */
-#define MII_LXT971_ISR 19 /* Interrupt Status Register */
-#define MII_LXT971_LCR 20 /* LED Control Register */
-#define MII_LXT971_TCR 30 /* Transmit Control Register */
+ if (status_change)
+ phy_print_status(phy_dev);
+}
/*
- * I had some nice ideas of running the MDIO faster...
- * The 971 should support 8MHz and I tried it, but things acted really
- * weird, so 2.5 MHz ought to be enough for anyone...
+ * NOTE: a MII transaction is during around 25 us, so polling it...
*/
-
-static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev)
+static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile uint *s = &(fep->phy_status);
- uint status;
+ struct fec_enet_private *fep = bus->priv;
+ int timeout = FEC_MII_TIMEOUT;
- status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC);
+ fep->mii_timeout = 0;
- if (mii_reg & 0x0400) {
- fep->link = 1;
- status |= PHY_STAT_LINK;
- } else {
- fep->link = 0;
- }
- if (mii_reg & 0x0080)
- status |= PHY_STAT_ANC;
- if (mii_reg & 0x4000) {
- if (mii_reg & 0x0200)
- status |= PHY_STAT_100FDX;
- else
- status |= PHY_STAT_100HDX;
- } else {
- if (mii_reg & 0x0200)
- status |= PHY_STAT_10FDX;
- else
- status |= PHY_STAT_10HDX;
+ /* clear MII end of transfer bit*/
+ writel(FEC_ENET_MII, fep->hwp + FEC_IEVENT);
+
+ /* start a read op */
+ writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
+ FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
+ FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
+
+ /* wait for end of transfer */
+ while (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_MII)) {
+ cpu_relax();
+ if (timeout-- < 0) {
+ fep->mii_timeout = 1;
+ printk(KERN_ERR "FEC: MDIO read timeout\n");
+ return -ETIMEDOUT;
+ }
}
- if (mii_reg & 0x0008)
- status |= PHY_STAT_FAULT;
- *s = status;
+ /* return value */
+ return FEC_MMFR_DATA(readl(fep->hwp + FEC_MII_DATA));
}
-static phy_cmd_t const phy_cmd_lxt971_config[] = {
- /* limit to 10MBit because my prototype board
- * doesn't work with 100. */
- { mk_mii_read(MII_REG_CR), mii_parse_cr },
- { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
- { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 },
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_lxt971_startup[] = { /* enable interrupts */
- { mk_mii_write(MII_LXT971_IER, 0x00f2), NULL },
- { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_write(MII_LXT971_LCR, 0xd422), NULL }, /* LED config */
- /* Somehow does the 971 tell me that the link is down
- * the first read after power-up.
- * read here to get a valid value in ack_int */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_lxt971_ack_int[] = {
- /* acknowledge the int before reading status ! */
- { mk_mii_read(MII_LXT971_ISR), NULL },
- /* find out the current status */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 },
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_lxt971_shutdown[] = { /* disable interrupts */
- { mk_mii_write(MII_LXT971_IER, 0x0000), NULL },
- { mk_mii_end, }
- };
-static phy_info_t const phy_info_lxt971 = {
- .id = 0x0001378e,
- .name = "LXT971",
- .config = phy_cmd_lxt971_config,
- .startup = phy_cmd_lxt971_startup,
- .ack_int = phy_cmd_lxt971_ack_int,
- .shutdown = phy_cmd_lxt971_shutdown
-};
-
-/* ------------------------------------------------------------------------- */
-/* The Quality Semiconductor QS6612 is used on the RPX CLLF */
-
-/* register definitions */
-
-#define MII_QS6612_MCR 17 /* Mode Control Register */
-#define MII_QS6612_FTR 27 /* Factory Test Register */
-#define MII_QS6612_MCO 28 /* Misc. Control Register */
-#define MII_QS6612_ISR 29 /* Interrupt Source Register */
-#define MII_QS6612_IMR 30 /* Interrupt Mask Register */
-#define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */
-
-static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev)
+static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+ u16 value)
{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile uint *s = &(fep->phy_status);
- uint status;
+ struct fec_enet_private *fep = bus->priv;
+ int timeout = FEC_MII_TIMEOUT;
- status = *s & ~(PHY_STAT_SPMASK);
+ fep->mii_timeout = 0;
- switch((mii_reg >> 2) & 7) {
- case 1: status |= PHY_STAT_10HDX; break;
- case 2: status |= PHY_STAT_100HDX; break;
- case 5: status |= PHY_STAT_10FDX; break;
- case 6: status |= PHY_STAT_100FDX; break;
-}
-
- *s = status;
-}
-
-static phy_cmd_t const phy_cmd_qs6612_config[] = {
- /* The PHY powers up isolated on the RPX,
- * so send a command to allow operation.
- */
- { mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
-
- /* parse cr and anar to get some info */
- { mk_mii_read(MII_REG_CR), mii_parse_cr },
- { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_qs6612_startup[] = { /* enable interrupts */
- { mk_mii_write(MII_QS6612_IMR, 0x003a), NULL },
- { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_qs6612_ack_int[] = {
- /* we need to read ISR, SR and ANER to acknowledge */
- { mk_mii_read(MII_QS6612_ISR), NULL },
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- { mk_mii_read(MII_REG_ANER), NULL },
-
- /* read pcr to get info */
- { mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr },
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_qs6612_shutdown[] = { /* disable interrupts */
- { mk_mii_write(MII_QS6612_IMR, 0x0000), NULL },
- { mk_mii_end, }
- };
-static phy_info_t const phy_info_qs6612 = {
- .id = 0x00181440,
- .name = "QS6612",
- .config = phy_cmd_qs6612_config,
- .startup = phy_cmd_qs6612_startup,
- .ack_int = phy_cmd_qs6612_ack_int,
- .shutdown = phy_cmd_qs6612_shutdown
-};
-
-/* ------------------------------------------------------------------------- */
-/* AMD AM79C874 phy */
+ /* clear MII end of transfer bit*/
+ writel(FEC_ENET_MII, fep->hwp + FEC_IEVENT);
-/* register definitions for the 874 */
+ /* start a read op */
+ writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
+ FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
+ FEC_MMFR_TA | FEC_MMFR_DATA(value),
+ fep->hwp + FEC_MII_DATA);
+
+ /* wait for end of transfer */
+ while (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_MII)) {
+ cpu_relax();
+ if (timeout-- < 0) {
+ fep->mii_timeout = 1;
+ printk(KERN_ERR "FEC: MDIO write timeout\n");
+ return -ETIMEDOUT;
+ }
+ }
-#define MII_AM79C874_MFR 16 /* Miscellaneous Feature Register */
-#define MII_AM79C874_ICSR 17 /* Interrupt/Status Register */
-#define MII_AM79C874_DR 18 /* Diagnostic Register */
-#define MII_AM79C874_PMLR 19 /* Power and Loopback Register */
-#define MII_AM79C874_MCR 21 /* ModeControl Register */
-#define MII_AM79C874_DC 23 /* Disconnect Counter */
-#define MII_AM79C874_REC 24 /* Recieve Error Counter */
+ return 0;
+}
-static void mii_parse_am79c874_dr(uint mii_reg, struct net_device *dev)
+static int fec_enet_mdio_reset(struct mii_bus *bus)
{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile uint *s = &(fep->phy_status);
- uint status;
-
- status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_ANC);
-
- if (mii_reg & 0x0080)
- status |= PHY_STAT_ANC;
- if (mii_reg & 0x0400)
- status |= ((mii_reg & 0x0800) ? PHY_STAT_100FDX : PHY_STAT_100HDX);
- else
- status |= ((mii_reg & 0x0800) ? PHY_STAT_10FDX : PHY_STAT_10HDX);
-
- *s = status;
+ return 0;
}
-static phy_cmd_t const phy_cmd_am79c874_config[] = {
- { mk_mii_read(MII_REG_CR), mii_parse_cr },
- { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
- { mk_mii_read(MII_AM79C874_DR), mii_parse_am79c874_dr },
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_am79c874_startup[] = { /* enable interrupts */
- { mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL },
- { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_am79c874_ack_int[] = {
- /* find out the current status */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- { mk_mii_read(MII_AM79C874_DR), mii_parse_am79c874_dr },
- /* we only need to read ISR to acknowledge */
- { mk_mii_read(MII_AM79C874_ICSR), NULL },
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_am79c874_shutdown[] = { /* disable interrupts */
- { mk_mii_write(MII_AM79C874_ICSR, 0x0000), NULL },
- { mk_mii_end, }
- };
-static phy_info_t const phy_info_am79c874 = {
- .id = 0x00022561,
- .name = "AM79C874",
- .config = phy_cmd_am79c874_config,
- .startup = phy_cmd_am79c874_startup,
- .ack_int = phy_cmd_am79c874_ack_int,
- .shutdown = phy_cmd_am79c874_shutdown
-};
-
-
-/* ------------------------------------------------------------------------- */
-/* Kendin KS8721BL phy */
-
-/* register definitions for the 8721 */
-
-#define MII_KS8721BL_RXERCR 21
-#define MII_KS8721BL_ICSR 27
-#define MII_KS8721BL_PHYCR 31
-
-static phy_cmd_t const phy_cmd_ks8721bl_config[] = {
- { mk_mii_read(MII_REG_CR), mii_parse_cr },
- { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_ks8721bl_startup[] = { /* enable interrupts */
- { mk_mii_write(MII_KS8721BL_ICSR, 0xff00), NULL },
- { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_ks8721bl_ack_int[] = {
- /* find out the current status */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- /* we only need to read ISR to acknowledge */
- { mk_mii_read(MII_KS8721BL_ICSR), NULL },
- { mk_mii_end, }
- };
-static phy_cmd_t const phy_cmd_ks8721bl_shutdown[] = { /* disable interrupts */
- { mk_mii_write(MII_KS8721BL_ICSR, 0x0000), NULL },
- { mk_mii_end, }
- };
-static phy_info_t const phy_info_ks8721bl = {
- .id = 0x00022161,
- .name = "KS8721BL",
- .config = phy_cmd_ks8721bl_config,
- .startup = phy_cmd_ks8721bl_startup,
- .ack_int = phy_cmd_ks8721bl_ack_int,
- .shutdown = phy_cmd_ks8721bl_shutdown
-};
-
-/* ------------------------------------------------------------------------- */
-/* register definitions for the DP83848 */
-
-#define MII_DP8384X_PHYSTST 16 /* PHY Status Register */
-
-static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev)
+static int fec_enet_mii_probe(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
- volatile uint *s = &(fep->phy_status);
-
- *s &= ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC);
-
- /* Link up */
- if (mii_reg & 0x0001) {
- fep->link = 1;
- *s |= PHY_STAT_LINK;
- } else
- fep->link = 0;
- /* Status of link */
- if (mii_reg & 0x0010) /* Autonegotioation complete */
- *s |= PHY_STAT_ANC;
- if (mii_reg & 0x0002) { /* 10MBps? */
- if (mii_reg & 0x0004) /* Full Duplex? */
- *s |= PHY_STAT_10FDX;
- else
- *s |= PHY_STAT_10HDX;
- } else { /* 100 Mbps? */
- if (mii_reg & 0x0004) /* Full Duplex? */
- *s |= PHY_STAT_100FDX;
- else
- *s |= PHY_STAT_100HDX;
- }
- if (mii_reg & 0x0008)
- *s |= PHY_STAT_FAULT;
-}
-
-static phy_info_t phy_info_dp83848= {
- 0x020005c9,
- "DP83848",
+ struct phy_device *phy_dev = NULL;
+ int phy_addr;
- (const phy_cmd_t []) { /* config */
- { mk_mii_read(MII_REG_CR), mii_parse_cr },
- { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
- { mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* startup - enable interrupts */
- { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* ack_int - never happens, no interrupt */
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* shutdown */
- { mk_mii_end, }
- },
-};
+ /* find the first phy */
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+ if (fep->mii_bus->phy_map[phy_addr]) {
+ phy_dev = fep->mii_bus->phy_map[phy_addr];
+ break;
+ }
+ }
-static phy_info_t phy_info_lan8700 = {
- 0x0007C0C,
- "LAN8700",
- (const phy_cmd_t []) { /* config */
- { mk_mii_read(MII_REG_CR), mii_parse_cr },
- { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* startup */
- { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* act_int */
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* shutdown */
- { mk_mii_end, }
- },
-};
-/* ------------------------------------------------------------------------- */
+ if (!phy_dev) {
+ printk(KERN_ERR "%s: no PHY found\n", dev->name);
+ return -ENODEV;
+ }
-static phy_info_t const * const phy_info[] = {
- &phy_info_lxt970,
- &phy_info_lxt971,
- &phy_info_qs6612,
- &phy_info_am79c874,
- &phy_info_ks8721bl,
- &phy_info_dp83848,
- &phy_info_lan8700,
- NULL
-};
+ /* attach the mac to the phy */
+ phy_dev = phy_connect(dev, dev_name(&phy_dev->dev),
+ &fec_enet_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
+ if (IS_ERR(phy_dev)) {
+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+ return PTR_ERR(phy_dev);
+ }
-/* ------------------------------------------------------------------------- */
-#ifdef HAVE_mii_link_interrupt
-static irqreturn_t
-mii_link_interrupt(int irq, void * dev_id);
+ /* mask with MAC supported features */
+ phy_dev->supported &= PHY_BASIC_FEATURES;
+ phy_dev->advertising = phy_dev->supported;
-/*
- * This is specific to the MII interrupt setup of the M5272EVB.
- */
-static void __inline__ fec_request_mii_intr(struct net_device *dev)
-{
- if (request_irq(66, mii_link_interrupt, IRQF_DISABLED, "fec(MII)", dev) != 0)
- printk("FEC: Could not allocate fec(MII) IRQ(66)!\n");
-}
+ fep->phy_dev = phy_dev;
+ fep->link = 0;
+ fep->full_duplex = 0;
-static void __inline__ fec_disable_phy_intr(struct net_device *dev)
-{
- free_irq(66, dev);
+ return 0;
}
-#endif
-#ifdef CONFIG_M5272
-static void __inline__ fec_get_mac(struct net_device *dev)
+static int fec_enet_mii_init(struct platform_device *pdev)
{
+ struct net_device *dev = platform_get_drvdata(pdev);
struct fec_enet_private *fep = netdev_priv(dev);
- unsigned char *iap, tmpaddr[ETH_ALEN];
+ int err = -ENXIO, i;
- if (FEC_FLASHMAC) {
- /*
- * Get MAC address from FLASH.
- * If it is all 1's or 0's, use the default.
- */
- iap = (unsigned char *)FEC_FLASHMAC;
- if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
- (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
- iap = fec_mac_default;
- if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
- (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
- iap = fec_mac_default;
- } else {
- *((unsigned long *) &tmpaddr[0]) = readl(fep->hwp + FEC_ADDR_LOW);
- *((unsigned short *) &tmpaddr[4]) = (readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
- iap = &tmpaddr[0];
- }
-
- memcpy(dev->dev_addr, iap, ETH_ALEN);
-
- /* Adjust MAC if using default MAC address */
- if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
-}
-#endif
+ fep->mii_timeout = 0;
-/* ------------------------------------------------------------------------- */
-
-static void mii_display_status(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile uint *s = &(fep->phy_status);
+ /*
+ * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed)
+ */
+ fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk), 5000000) << 1;
+ writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
- if (!fep->link && !fep->old_link) {
- /* Link is still down - don't print anything */
- return;
+ fep->mii_bus = mdiobus_alloc();
+ if (fep->mii_bus == NULL) {
+ err = -ENOMEM;
+ goto err_out;
}
- printk("%s: status: ", dev->name);
-
- if (!fep->link) {
- printk("link down");
- } else {
- printk("link up");
-
- switch(*s & PHY_STAT_SPMASK) {
- case PHY_STAT_100FDX: printk(", 100MBit Full Duplex"); break;
- case PHY_STAT_100HDX: printk(", 100MBit Half Duplex"); break;
- case PHY_STAT_10FDX: printk(", 10MBit Full Duplex"); break;
- case PHY_STAT_10HDX: printk(", 10MBit Half Duplex"); break;
- default:
- printk(", Unknown speed/duplex");
- }
-
- if (*s & PHY_STAT_ANC)
- printk(", auto-negotiation complete");
+ fep->mii_bus->name = "fec_enet_mii_bus";
+ fep->mii_bus->read = fec_enet_mdio_read;
+ fep->mii_bus->write = fec_enet_mdio_write;
+ fep->mii_bus->reset = fec_enet_mdio_reset;
+ snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
+ fep->mii_bus->priv = fep;
+ fep->mii_bus->parent = &pdev->dev;
+
+ fep->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+ if (!fep->mii_bus->irq) {
+ err = -ENOMEM;
+ goto err_out_free_mdiobus;
}
- if (*s & PHY_STAT_FAULT)
- printk(", remote fault");
-
- printk(".\n");
-}
-
-static void mii_display_config(struct work_struct *work)
-{
- struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task);
- struct net_device *dev = fep->netdev;
- uint status = fep->phy_status;
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ fep->mii_bus->irq[i] = PHY_POLL;
- /*
- ** When we get here, phy_task is already removed from
- ** the workqueue. It is thus safe to allow to reuse it.
- */
- fep->mii_phy_task_queued = 0;
- printk("%s: config: auto-negotiation ", dev->name);
-
- if (status & PHY_CONF_ANE)
- printk("on");
- else
- printk("off");
+ platform_set_drvdata(dev, fep->mii_bus);
- if (status & PHY_CONF_100FDX)
- printk(", 100FDX");
- if (status & PHY_CONF_100HDX)
- printk(", 100HDX");
- if (status & PHY_CONF_10FDX)
- printk(", 10FDX");
- if (status & PHY_CONF_10HDX)
- printk(", 10HDX");
- if (!(status & PHY_CONF_SPMASK))
- printk(", No speed/duplex selected?");
+ if (mdiobus_register(fep->mii_bus))
+ goto err_out_free_mdio_irq;
- if (status & PHY_CONF_LOOP)
- printk(", loopback enabled");
+ if (fec_enet_mii_probe(dev) != 0)
+ goto err_out_unregister_bus;
- printk(".\n");
+ return 0;
- fep->sequence_done = 1;
+err_out_unregister_bus:
+ mdiobus_unregister(fep->mii_bus);
+err_out_free_mdio_irq:
+ kfree(fep->mii_bus->irq);
+err_out_free_mdiobus:
+ mdiobus_free(fep->mii_bus);
+err_out:
+ return err;
}
-static void mii_relink(struct work_struct *work)
+static void fec_enet_mii_remove(struct fec_enet_private *fep)
{
- struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task);
- struct net_device *dev = fep->netdev;
- int duplex;
-
- /*
- ** When we get here, phy_task is already removed from
- ** the workqueue. It is thus safe to allow to reuse it.
- */
- fep->mii_phy_task_queued = 0;
- fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0;
- mii_display_status(dev);
- fep->old_link = fep->link;
-
- if (fep->link) {
- duplex = 0;
- if (fep->phy_status
- & (PHY_STAT_100FDX | PHY_STAT_10FDX))
- duplex = 1;
- fec_restart(dev, duplex);
- } else
- fec_stop(dev);
+ if (fep->phy_dev)
+ phy_disconnect(fep->phy_dev);
+ mdiobus_unregister(fep->mii_bus);
+ kfree(fep->mii_bus->irq);
+ mdiobus_free(fep->mii_bus);
}
-/* mii_queue_relink is called in interrupt context from mii_link_interrupt */
-static void mii_queue_relink(uint mii_reg, struct net_device *dev)
+static int fec_enet_get_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
{
struct fec_enet_private *fep = netdev_priv(dev);
+ struct phy_device *phydev = fep->phy_dev;
- /*
- * We cannot queue phy_task twice in the workqueue. It
- * would cause an endless loop in the workqueue.
- * Fortunately, if the last mii_relink entry has not yet been
- * executed now, it will do the job for the current interrupt,
- * which is just what we want.
- */
- if (fep->mii_phy_task_queued)
- return;
+ if (!phydev)
+ return -ENODEV;
- fep->mii_phy_task_queued = 1;
- INIT_WORK(&fep->phy_task, mii_relink);
- schedule_work(&fep->phy_task);
+ return phy_ethtool_gset(phydev, cmd);
}
-/* mii_queue_config is called in interrupt context from fec_enet_mii */
-static void mii_queue_config(uint mii_reg, struct net_device *dev)
+static int fec_enet_set_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
{
struct fec_enet_private *fep = netdev_priv(dev);
+ struct phy_device *phydev = fep->phy_dev;
- if (fep->mii_phy_task_queued)
- return;
+ if (!phydev)
+ return -ENODEV;
- fep->mii_phy_task_queued = 1;
- INIT_WORK(&fep->phy_task, mii_display_config);
- schedule_work(&fep->phy_task);
+ return phy_ethtool_sset(phydev, cmd);
}
-phy_cmd_t const phy_cmd_relink[] = {
- { mk_mii_read(MII_REG_CR), mii_queue_relink },
- { mk_mii_end, }
- };
-phy_cmd_t const phy_cmd_config[] = {
- { mk_mii_read(MII_REG_CR), mii_queue_config },
- { mk_mii_end, }
- };
-
-/* Read remainder of PHY ID. */
-static void
-mii_discover_phy3(uint mii_reg, struct net_device *dev)
+static void fec_enet_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
{
- struct fec_enet_private *fep;
- int i;
-
- fep = netdev_priv(dev);
- fep->phy_id |= (mii_reg & 0xffff);
- printk("fec: PHY @ 0x%x, ID 0x%08x", fep->phy_addr, fep->phy_id);
-
- for(i = 0; phy_info[i]; i++) {
- if(phy_info[i]->id == (fep->phy_id >> 4))
- break;
- }
-
- if (phy_info[i])
- printk(" -- %s\n", phy_info[i]->name);
- else
- printk(" -- unknown PHY!\n");
+ struct fec_enet_private *fep = netdev_priv(dev);
- fep->phy = phy_info[i];
- fep->phy_id_done = 1;
+ strcpy(info->driver, fep->pdev->dev.driver->name);
+ strcpy(info->version, "Revision: 1.0");
+ strcpy(info->bus_info, dev_name(&dev->dev));
}
-/* Scan all of the MII PHY addresses looking for someone to respond
- * with a valid ID. This usually happens quickly.
- */
-static void
-mii_discover_phy(uint mii_reg, struct net_device *dev)
-{
- struct fec_enet_private *fep;
- uint phytype;
-
- fep = netdev_priv(dev);
-
- if (fep->phy_addr < 32) {
- if ((phytype = (mii_reg & 0xffff)) != 0xffff && phytype != 0) {
-
- /* Got first part of ID, now get remainder */
- fep->phy_id = phytype << 16;
- mii_queue_unlocked(dev, mk_mii_read(MII_REG_PHYIR2),
- mii_discover_phy3);
- } else {
- fep->phy_addr++;
- mii_queue_unlocked(dev, mk_mii_read(MII_REG_PHYIR1),
- mii_discover_phy);
- }
- } else {
- printk("FEC: No PHY device found.\n");
- /* Disable external MII interface */
- writel(0, fep->hwp + FEC_MII_SPEED);
- fep->phy_speed = 0;
-#ifdef HAVE_mii_link_interrupt
- fec_disable_phy_intr(dev);
-#endif
- }
-}
+static struct ethtool_ops fec_enet_ethtool_ops = {
+ .get_settings = fec_enet_get_settings,
+ .set_settings = fec_enet_set_settings,
+ .get_drvinfo = fec_enet_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+};
-/* This interrupt occurs when the PHY detects a link change */
-#ifdef HAVE_mii_link_interrupt
-static irqreturn_t
-mii_link_interrupt(int irq, void * dev_id)
+static int fec_enet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
- struct net_device *dev = dev_id;
struct fec_enet_private *fep = netdev_priv(dev);
+ struct phy_device *phydev = fep->phy_dev;
+
+ if (!netif_running(dev))
+ return -EINVAL;
- mii_do_cmd(dev, fep->phy->ack_int);
- mii_do_cmd(dev, phy_cmd_relink); /* restart and display status */
+ if (!phydev)
+ return -ENODEV;
- return IRQ_HANDLED;
+ return phy_mii_ioctl(phydev, if_mii(rq), cmd);
}
-#endif
static void fec_enet_free_buffers(struct net_device *dev)
{
if (ret)
return ret;
- fep->sequence_done = 0;
- fep->link = 0;
-
- fec_restart(dev, 1);
-
- if (fep->phy) {
- mii_do_cmd(dev, fep->phy->ack_int);
- mii_do_cmd(dev, fep->phy->config);
- mii_do_cmd(dev, phy_cmd_config); /* display configuration */
-
- /* Poll until the PHY tells us its configuration
- * (not link state).
- * Request is initiated by mii_do_cmd above, but answer
- * comes by interrupt.
- * This should take about 25 usec per register at 2.5 MHz,
- * and we read approximately 5 registers.
- */
- while(!fep->sequence_done)
- schedule();
-
- mii_do_cmd(dev, fep->phy->startup);
- }
-
- /* Set the initial link state to true. A lot of hardware
- * based on this device does not implement a PHY interrupt,
- * so we are never notified of link change.
- */
- fep->link = 1;
-
+ /* schedule a link state check */
+ phy_start(fep->phy_dev);
netif_start_queue(dev);
fep->opened = 1;
return 0;
/* Don't know what to do yet. */
fep->opened = 0;
+ phy_stop(fep->phy_dev);
netif_stop_queue(dev);
fec_stop(dev);
.ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = fec_timeout,
.ndo_set_mac_address = fec_set_mac_address,
+ .ndo_do_ioctl = fec_enet_ioctl,
};
/*
}
spin_lock_init(&fep->hw_lock);
- spin_lock_init(&fep->mii_lock);
fep->index = index;
fep->hwp = (void __iomem *)dev->base_addr;
fep->rx_bd_base = cbd_base;
fep->tx_bd_base = cbd_base + RX_RING_SIZE;
-#ifdef HAVE_mii_link_interrupt
- fec_request_mii_intr(dev);
-#endif
/* The FEC Ethernet specific entries in the device structure */
dev->watchdog_timeo = TX_TIMEOUT;
dev->netdev_ops = &fec_netdev_ops;
-
- for (i=0; i<NMII-1; i++)
- mii_cmds[i].mii_next = &mii_cmds[i+1];
- mii_free = mii_cmds;
-
- /* Set MII speed to 2.5 MHz */
- fep->phy_speed = ((((clk_get_rate(fep->clk) / 2 + 4999999)
- / 2500000) / 2) & 0x3F) << 1;
+ dev->ethtool_ops = &fec_enet_ethtool_ops;
/* Initialize the receive buffer descriptors. */
bdp = fep->rx_bd_base;
fec_restart(dev, 0);
- /* Queue up command to detect the PHY and initialize the
- * remainder of the interface.
- */
- fep->phy_id_done = 0;
- fep->phy_addr = 0;
- mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy);
-
return 0;
}
writel(0, fep->hwp + FEC_R_DES_ACTIVE);
/* Enable interrupts we wish to service */
- writel(FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII,
- fep->hwp + FEC_IMASK);
+ writel(FEC_ENET_TXF | FEC_ENET_RXF, fep->hwp + FEC_IMASK);
}
static void
/* Clear outstanding MII command interrupts. */
writel(FEC_ENET_MII, fep->hwp + FEC_IEVENT);
- writel(FEC_ENET_MII, fep->hwp + FEC_IMASK);
writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
}
memset(fep, 0, sizeof(*fep));
ndev->base_addr = (unsigned long)ioremap(r->start, resource_size(r));
+ fep->pdev = pdev;
if (!ndev->base_addr) {
ret = -ENOMEM;
if (ret)
goto failed_init;
+ ret = fec_enet_mii_init(pdev);
+ if (ret)
+ goto failed_mii_init;
+
ret = register_netdev(ndev);
if (ret)
goto failed_register;
+ printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] "
+ "(mii_bus:phy_addr=%s, irq=%d)\n", ndev->name,
+ fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev),
+ fep->phy_dev->irq);
+
return 0;
failed_register:
+ fec_enet_mii_remove(fep);
+failed_mii_init:
failed_init:
clk_disable(fep->clk);
clk_put(fep->clk);
platform_set_drvdata(pdev, NULL);
fec_stop(ndev);
+ fec_enet_mii_remove(fep);
clk_disable(fep->clk);
clk_put(fep->clk);
iounmap((void __iomem *)ndev->base_addr);
projects / linux-beck.git / commitdiff