described in mmc.txt, can be used. Additionally the following tmio_mmc-specific
optional bindings can be used.
+Required properties:
+- compatible: "renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit
+ "renesas,sdhi-sh7372" - SDHI IP on SH7372 SoC
+ "renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC
+ "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC
+ "renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC
+ "renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
+ "renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
+ "renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
+
Optional properties:
- toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
-
-When used with Renesas SDHI hardware, the following compatibility strings
-configure various model-specific properties:
-
-"renesas,sh7372-sdhi": (default) compatible with SH7372
-"renesas,r8a7740-sdhi": compatible with R8A7740: certain MMC/SD commands have to
- wait for the interface to become idle.
F: arch/arm/mach-gemini/
ARM/CSR SIRFPRIMA2 MACHINE SUPPORT
-M: Barry Song <baohua.song@csr.com>
+M: Barry Song <baohua@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
S: Maintained
F: arch/arm/mach-prima2/
+F: drivers/clk/clk-prima2.c
+F: drivers/clocksource/timer-prima2.c
+F: drivers/clocksource/timer-marco.c
F: drivers/dma/sirf-dma.c
F: drivers/i2c/busses/i2c-sirf.c
+F: drivers/input/misc/sirfsoc-onkey.c
+F: drivers/irqchip/irq-sirfsoc.c
F: drivers/mmc/host/sdhci-sirf.c
F: drivers/pinctrl/sirf/
+F: drivers/rtc/rtc-sirfsoc.c
F: drivers/spi/spi-sirf.c
ARM/EBSA110 MACHINE SUPPORT
dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb
+dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
+
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
bcm28155-ap.dtb
};
soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /* Connected to Marvell SATA controller */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Connected to FL1009 USB 3.0 controller */
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+
internal-regs {
serial@12000 {
clock-frequency = <200000000>;
marvell,pins = "mpp56";
marvell,function = "gpio";
};
+
+ poweroff: poweroff {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
};
mdio {
pwm_polarity = <0>;
};
};
-
- pcie-controller {
- status = "okay";
-
- /* Connected to Marvell SATA controller */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
-
- /* Connected to FL1009 USB 3.0 controller */
- pcie@2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
};
};
button@1 {
label = "Power Button";
linux,code = <116>; /* KEY_POWER */
- gpios = <&gpio1 30 1>;
+ gpios = <&gpio1 30 0>;
};
button@2 {
};
};
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&poweroff>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 8 1>;
+ };
+
};
timer@20300 {
compatible = "marvell,armada-xp-timer";
+ clocks = <&coreclk 2>, <&refclk>;
+ clock-names = "nbclk", "fixed";
};
coreclk: mvebu-sar@18230 {
};
};
};
+
+ clocks {
+ /* 25 MHz reference crystal */
+ refclk: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+ };
};
AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */
};
- pinctrl_uart2_rts: uart2_rts-0 {
+ pinctrl_usart2_rts: usart2_rts-0 {
atmel,pins =
<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */
};
- pinctrl_uart2_cts: uart2_cts-0 {
+ pinctrl_usart2_cts: usart2_cts-0 {
atmel,pins =
<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */
};
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
+ pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
+ pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
interrupts = <17>;
fifosize = <128>;
clocks = <&clks 13>;
+ sirf,uart-dma-rx-channel = <21>;
+ sirf,uart-dma-tx-channel = <2>;
};
uart1: uart@b0060000 {
interrupts = <19>;
fifosize = <128>;
clocks = <&clks 15>;
+ sirf,uart-dma-rx-channel = <6>;
+ sirf,uart-dma-tx-channel = <7>;
};
usp0: usp@b0080000 {
compatible = "sirf,prima2-usp";
reg = <0xb0080000 0x10000>;
interrupts = <20>;
+ fifosize = <128>;
clocks = <&clks 28>;
+ sirf,usp-dma-rx-channel = <17>;
+ sirf,usp-dma-tx-channel = <18>;
};
usp1: usp@b0090000 {
compatible = "sirf,prima2-usp";
reg = <0xb0090000 0x10000>;
interrupts = <21>;
+ fifosize = <128>;
clocks = <&clks 29>;
+ sirf,usp-dma-rx-channel = <14>;
+ sirf,usp-dma-tx-channel = <15>;
};
dmac0: dma-controller@b00b0000 {
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
clocks = <&clks 31>;
+ interrupts = <14>;
+ sirf,vip-dma-rx-channel = <16>;
};
spi0: spi@b00d0000 {
cpu@0 {
device_type = "cpu";
compatible = "marvell,feroceon";
+ reg = <0>;
clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
clock-names = "cpu_clk", "ddrclk", "powersave";
};
xor@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
- 0xd0B00 0x100>;
+ 0x60B00 0x100>;
status = "okay";
clocks = <&gate_clk 16>;
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0xb0000000 0xb0000000 0x180000>;
+ ranges = <0xb0000000 0xb0000000 0x180000>,
+ <0x56000000 0x56000000 0x1b00000>;
timer@b0020000 {
compatible = "sirf,prima2-tick";
uart0: uart@b0050000 {
cell-index = <0>;
compatible = "sirf,prima2-uart";
- reg = <0xb0050000 0x10000>;
+ reg = <0xb0050000 0x1000>;
interrupts = <17>;
+ fifosize = <128>;
clocks = <&clks 13>;
+ sirf,uart-dma-rx-channel = <21>;
+ sirf,uart-dma-tx-channel = <2>;
};
uart1: uart@b0060000 {
cell-index = <1>;
compatible = "sirf,prima2-uart";
- reg = <0xb0060000 0x10000>;
+ reg = <0xb0060000 0x1000>;
interrupts = <18>;
+ fifosize = <32>;
clocks = <&clks 14>;
};
uart2: uart@b0070000 {
cell-index = <2>;
compatible = "sirf,prima2-uart";
- reg = <0xb0070000 0x10000>;
+ reg = <0xb0070000 0x1000>;
interrupts = <19>;
+ fifosize = <128>;
clocks = <&clks 15>;
+ sirf,uart-dma-rx-channel = <6>;
+ sirf,uart-dma-tx-channel = <7>;
};
usp0: usp@b0080000 {
compatible = "sirf,prima2-usp";
reg = <0xb0080000 0x10000>;
interrupts = <20>;
+ fifosize = <128>;
clocks = <&clks 28>;
+ sirf,usp-dma-rx-channel = <17>;
+ sirf,usp-dma-tx-channel = <18>;
};
usp1: usp@b0090000 {
compatible = "sirf,prima2-usp";
reg = <0xb0090000 0x10000>;
interrupts = <21>;
+ fifosize = <128>;
clocks = <&clks 29>;
+ sirf,usp-dma-rx-channel = <14>;
+ sirf,usp-dma-tx-channel = <15>;
};
usp2: usp@b00a0000 {
compatible = "sirf,prima2-usp";
reg = <0xb00a0000 0x10000>;
interrupts = <22>;
+ fifosize = <128>;
clocks = <&clks 30>;
+ sirf,usp-dma-rx-channel = <10>;
+ sirf,usp-dma-tx-channel = <11>;
};
dmac0: dma-controller@b00b0000 {
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
clocks = <&clks 31>;
+ interrupts = <14>;
+ sirf,vip-dma-rx-channel = <16>;
};
spi0: spi@b00d0000 {
};
sdhi0: sdhi@ee100000 {
- compatible = "renesas,r8a73a4-sdhi";
+ compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee100000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 165 4>;
};
sdhi1: sdhi@ee120000 {
- compatible = "renesas,r8a73a4-sdhi";
+ compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee120000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 166 4>;
};
sdhi2: sdhi@ee140000 {
- compatible = "renesas,r8a73a4-sdhi";
+ compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee140000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 167 4>;
pfc: pfc@fffc0000 {
compatible = "renesas,pfc-r8a7778";
reg = <0xfffc000 0x118>;
- #gpio-range-cells = <3>;
};
};
pfc: pfc@fffc0000 {
compatible = "renesas,pfc-r8a7779";
reg = <0xfffc0000 0x23c>;
- #gpio-range-cells = <3>;
};
thermal@ffc48000 {
pfc: pfc@e6060000 {
compatible = "renesas,pfc-r8a7790";
reg = <0 0xe6060000 0 0x250>;
- #gpio-range-cells = <3>;
};
sdhi0: sdhi@ee100000 {
- compatible = "renesas,r8a7790-sdhi";
+ compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee100000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 165 4>;
};
sdhi1: sdhi@ee120000 {
- compatible = "renesas,r8a7790-sdhi";
+ compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee120000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 166 4>;
};
sdhi2: sdhi@ee140000 {
- compatible = "renesas,r8a7790-sdhi";
+ compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee140000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 167 4>;
};
sdhi3: sdhi@ee160000 {
- compatible = "renesas,r8a7790-sdhi";
+ compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee160000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 168 4>;
};
sdhi0: sdhi@ee100000 {
- compatible = "renesas,r8a7740-sdhi";
+ compatible = "renesas,sdhi-r8a7740";
reg = <0xee100000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 83 4
/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
sdhi1: sdhi@ee120000 {
- compatible = "renesas,r8a7740-sdhi";
+ compatible = "renesas,sdhi-r8a7740";
reg = <0xee120000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 88 4
};
sdhi2: sdhi@ee140000 {
- compatible = "renesas,r8a7740-sdhi";
+ compatible = "renesas,sdhi-r8a7740";
reg = <0xee140000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 104 4
.ccnt = 1,
};
+static const struct of_device_id edma_of_ids[] = {
+ { .compatible = "ti,edma3", },
+ {}
+};
+
/*****************************************************************************/
static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
static int prepare_unused_channel_list(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
- int i, ctlr;
+ int i, count, ctlr;
+ struct of_phandle_args dma_spec;
+ if (dev->of_node) {
+ count = of_property_count_strings(dev->of_node, "dma-names");
+ if (count < 0)
+ return 0;
+ for (i = 0; i < count; i++) {
+ if (of_parse_phandle_with_args(dev->of_node, "dmas",
+ "#dma-cells", i,
+ &dma_spec))
+ continue;
+
+ if (!of_match_node(edma_of_ids, dma_spec.np)) {
+ of_node_put(dma_spec.np);
+ continue;
+ }
+
+ clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
+ edma_cc[0]->edma_unused);
+ of_node_put(dma_spec.np);
+ }
+ return 0;
+ }
+
+ /* For non-OF case */
for (i = 0; i < pdev->num_resources; i++) {
if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
(int)pdev->resource[i].start >= 0) {
ctlr = EDMA_CTLR(pdev->resource[i].start);
clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
- edma_cc[ctlr]->edma_unused);
+ edma_cc[ctlr]->edma_unused);
}
}
return 0;
}
-static const struct of_device_id edma_of_ids[] = {
- { .compatible = "ti,edma3", },
- {}
-};
-
static struct platform_driver edma_driver = {
.driver = {
.name = "edma",
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_SPEAR=y
CONFIG_MMC_OMAP=y
static struct irqaction at91rm9200_timer_irq = {
.name = "at91_tick",
- .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = at91rm9200_timer_interrupt,
.irq = NR_IRQS_LEGACY + AT91_ID_SYS,
};
static struct irqaction at91sam926x_pit_irq = {
.name = "at91_tick",
- .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = at91sam926x_pit_interrupt,
.irq = NR_IRQS_LEGACY + AT91_ID_SYS,
};
#include "at91_rstc.h"
.arm
+/*
+ * at91_ramc_base is an array void*
+ * init at NULL if only one DDR controler is present in or DT
+ */
.globl at91sam9g45_restart
at91sam9g45_restart:
ldr r5, =at91_ramc_base @ preload constants
ldr r0, [r5]
+ ldr r5, [r5, #4] @ ddr1
+ cmp r5, #0
ldr r4, =at91_rstc_base
ldr r1, [r4]
.balign 32 @ align to cache line
+ strne r2, [r5, #AT91_DDRSDRC_RTR] @ disable DDR1 access
+ strne r3, [r5, #AT91_DDRSDRC_LPR] @ power down DDR1
str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access
str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0
str r4, [r1, #AT91_RSTC_CR] @ reset processor
static struct irqaction at91x40_timer_irq = {
.name = "at91_tick",
- .flags = IRQF_DISABLED | IRQF_TIMER,
+ .flags = IRQF_TIMER,
.handler = at91x40_timer_interrupt
};
.context = (void *)0x7f00,
};
-static struct snd_platform_data dm365_evm_snd_data = {
+static struct snd_platform_data dm365_evm_snd_data __maybe_unused = {
.asp_chan_q = EVENTQ_3,
};
#include <mach/hardware.h>
-#include <linux/platform_device.h>
-
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
#define UART_DM646X_SCR_TX_WATERMARK 0x08
#ifndef __ASSEMBLY__
+#include <linux/platform_device.h>
+
extern int davinci_serial_init(struct platform_device *);
#endif
/* Simple oneliner include to the PCIv3 early init */
+#ifdef CONFIG_PCI
extern int pci_v3_early_init(void);
+#else
+static inline int pci_v3_early_init(void)
+{
+ return 0;
+}
+#endif
coherency_base = of_iomap(np, 0);
coherency_cpu_base = of_iomap(np, 1);
set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+ of_node_put(np);
}
return 0;
static int __init coherency_late_init(void)
{
- if (of_find_matching_node(NULL, of_coherency_table))
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, of_coherency_table);
+ if (np) {
bus_register_notifier(&platform_bus_type,
&mvebu_hwcc_platform_nb);
+ of_node_put(np);
+ }
return 0;
}
pr_info("Initializing Power Management Service Unit\n");
pmsu_mp_base = of_iomap(np, 0);
pmsu_reset_base = of_iomap(np, 1);
+ of_node_put(np);
}
return 0;
BUG_ON(!match);
system_controller_base = of_iomap(np, 0);
mvebu_sc = (struct mvebu_system_controller *)match->data;
+ of_node_put(np);
}
return 0;
PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740",
"fsib_mclk_in", "fsib"),
/* GETHER */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+ PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
"gether_mii", "gether"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+ PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
"gether_int", "gether"),
/* HDMI */
PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740",
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_device.h>
+#include <linux/phy.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
ðer_pdata, sizeof(ether_pdata));
}
+/*
+ * Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds
+ * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
+ * 14-15. We have to set them back to 01 from the default 00 value each time
+ * the PHY is reset. It's also important because the PHY's LED0 signal is
+ * connected to SoC's ETH_LINK signal and in the PHY's default mode it will
+ * bounce on and off after each packet, which we apparently want to avoid.
+ */
+static int lager_ksz8041_fixup(struct phy_device *phydev)
+{
+ u16 phyctrl1 = phy_read(phydev, 0x1e);
+
+ phyctrl1 &= ~0xc000;
+ phyctrl1 |= 0x4000;
+ return phy_write(phydev, 0x1e, phyctrl1);
+}
+
+static void __init lager_init(void)
+{
+ lager_add_standard_devices();
+
+ phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
+}
+
static const char *lager_boards_compat_dt[] __initdata = {
"renesas,lager",
NULL,
DT_MACHINE_START(LAGER_DT, "lager")
.init_early = r8a7790_init_delay,
.init_time = r8a7790_timer_init,
- .init_machine = lager_add_standard_devices,
+ .init_machine = lager_init,
.dt_compat = lager_boards_compat_dt,
MACHINE_END
} else
BUG();
+ /*
+ * If the CPU is committed to power down, make sure
+ * the power controller will be in charge of waking it
+ * up upon IRQ, ie IRQ lines are cut from GIC CPU IF
+ * to the CPU by disabling the GIC CPU IF to prevent wfi
+ * from completing execution behind power controller back
+ */
+ if (!skip_wfi)
+ gic_cpu_if_down();
+
if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
arch_spin_unlock(&tc2_pm_lock);
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
- gic_cpu_if_down();
tc2_pm_down(residency);
}
phys_addr_t sdramwins_phys_base,
size_t sdramwins_size)
{
+ struct device_node *np;
int win;
mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size);
return -ENOMEM;
}
- if (of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"))
+ np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
+ if (np) {
mbus->hw_io_coherency = 1;
+ of_node_put(np);
+ }
for (win = 0; win < mbus->soc->num_wins; win++)
mvebu_mbus_disable_window(mbus, win);
int ret;
/*
- * These are optional, so we clear them and they'll
- * be zero if they are missing from the DT.
+ * These are optional, so we make sure that resource_size(x) will
+ * return 0.
*/
memset(mem, 0, sizeof(struct resource));
+ mem->end = -1;
memset(io, 0, sizeof(struct resource));
+ io->end = -1;
ret = of_property_read_u32_array(np, "pcie-mem-aperture", reg, ARRAY_SIZE(reg));
if (!ret) {
if (pdata) {
p->config = *pdata;
} else if (IS_ENABLED(CONFIG_OF) && np) {
- ret = of_parse_phandle_with_args(np, "gpio-ranges",
- "#gpio-range-cells", 0, &args);
- p->config.number_of_pins = ret == 0 && args.args_count == 3
- ? args.args[2]
+ ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0,
+ &args);
+ p->config.number_of_pins = ret == 0 ? args.args[2]
: RCAR_MAX_GPIO_PER_BANK;
p->config.gpio_base = -1;
}
};
static const struct of_device_id sh_mobile_sdhi_of_match[] = {
- { .compatible = "renesas,shmobile-sdhi" },
- { .compatible = "renesas,sh7372-sdhi" },
- { .compatible = "renesas,sh73a0-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], },
- { .compatible = "renesas,r8a73a4-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], },
- { .compatible = "renesas,r8a7740-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], },
- { .compatible = "renesas,r8a7778-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], },
- { .compatible = "renesas,r8a7779-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], },
- { .compatible = "renesas,r8a7790-sdhi", .data = &sh_mobile_sdhi_of_cfg[0], },
+ { .compatible = "renesas,sdhi-shmobile" },
+ { .compatible = "renesas,sdhi-sh7372" },
+ { .compatible = "renesas,sdhi-sh73a0", .data = &sh_mobile_sdhi_of_cfg[0], },
+ { .compatible = "renesas,sdhi-r8a73a4", .data = &sh_mobile_sdhi_of_cfg[0], },
+ { .compatible = "renesas,sdhi-r8a7740", .data = &sh_mobile_sdhi_of_cfg[0], },
+ { .compatible = "renesas,sdhi-r8a7778", .data = &sh_mobile_sdhi_of_cfg[0], },
+ { .compatible = "renesas,sdhi-r8a7779", .data = &sh_mobile_sdhi_of_cfg[0], },
+ { .compatible = "renesas,sdhi-r8a7790", .data = &sh_mobile_sdhi_of_cfg[0], },
{},
};
MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
projects / linux-beck.git / commitdiff