+++ /dev/null
-/*
- * arch/arm/mach-mvbu/board-netxbig.c
- *
- * LaCie 2Big and 5Big Network v2 board setup
- *
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/leds-kirkwood-netxbig.h>
-#include "common.h"
-
-/*****************************************************************************
- * GPIO extension LEDs
- ****************************************************************************/
-
-/*
- * The LEDs are controlled by a CPLD and can be configured through a GPIO
- * extension bus:
- *
- * - address register : bit [0-2] -> GPIO [47-49]
- * - data register : bit [0-2] -> GPIO [44-46]
- * - enable register : GPIO 29
- */
-
-static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
-static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
-
-static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
- .addr = netxbig_v2_gpio_ext_addr,
- .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
- .data = netxbig_v2_gpio_ext_data,
- .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data),
- .enable = 29,
-};
-
-/*
- * Address register selection:
- *
- * addr | register
- * ----------------------------
- * 0 | front LED
- * 1 | front LED brightness
- * 2 | SATA LED brightness
- * 3 | SATA0 LED
- * 4 | SATA1 LED
- * 5 | SATA2 LED
- * 6 | SATA3 LED
- * 7 | SATA4 LED
- *
- * Data register configuration:
- *
- * data | LED brightness
- * -------------------------------------------------
- * 0 | min (off)
- * - | -
- * 7 | max
- *
- * data | front LED mode
- * -------------------------------------------------
- * 0 | fix off
- * 1 | fix blue on
- * 2 | fix red on
- * 3 | blink blue on=1 sec and blue off=1 sec
- * 4 | blink red on=1 sec and red off=1 sec
- * 5 | blink blue on=2.5 sec and red on=0.5 sec
- * 6 | blink blue on=1 sec and red on=1 sec
- * 7 | blink blue on=0.5 sec and blue off=2.5 sec
- *
- * data | SATA LED mode
- * -------------------------------------------------
- * 0 | fix off
- * 1 | SATA activity blink
- * 2 | fix red on
- * 3 | blink blue on=1 sec and blue off=1 sec
- * 4 | blink red on=1 sec and red off=1 sec
- * 5 | blink blue on=2.5 sec and red on=0.5 sec
- * 6 | blink blue on=1 sec and red on=1 sec
- * 7 | fix blue on
- */
-
-static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 2,
- [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
- [NETXBIG_LED_TIMER1] = 4,
- [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
-};
-
-static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 1,
- [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE,
- [NETXBIG_LED_TIMER1] = 3,
- [NETXBIG_LED_TIMER2] = 7,
-};
-
-static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
- [NETXBIG_LED_OFF] = 0,
- [NETXBIG_LED_ON] = 7,
- [NETXBIG_LED_SATA] = 1,
- [NETXBIG_LED_TIMER1] = 3,
- [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE,
-};
-
-static struct netxbig_led_timer netxbig_v2_led_timer[] = {
- [0] = {
- .delay_on = 500,
- .delay_off = 500,
- .mode = NETXBIG_LED_TIMER1,
- },
- [1] = {
- .delay_on = 500,
- .delay_off = 1000,
- .mode = NETXBIG_LED_TIMER2,
- },
-};
-
-#define NETXBIG_LED(_name, maddr, mval, baddr) \
- { .name = _name, \
- .mode_addr = maddr, \
- .mode_val = mval, \
- .bright_addr = baddr }
-
-static struct netxbig_led net2big_v2_leds_ctrl[] = {
- NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
- NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1),
- NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
-};
-
-static struct netxbig_led_platform_data net2big_v2_leds_data = {
- .gpio_ext = &netxbig_v2_gpio_ext,
- .timer = netxbig_v2_led_timer,
- .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
- .leds = net2big_v2_leds_ctrl,
- .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl),
-};
-
-static struct netxbig_led net5big_v2_leds_ctrl[] = {
- NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1),
- NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1),
- NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2),
- NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
- NETXBIG_LED("net5big-v2:red:sata4", 7, netxbig_v2_red_mled, 2),
-};
-
-static struct netxbig_led_platform_data net5big_v2_leds_data = {
- .gpio_ext = &netxbig_v2_gpio_ext,
- .timer = netxbig_v2_led_timer,
- .num_timer = ARRAY_SIZE(netxbig_v2_led_timer),
- .leds = net5big_v2_leds_ctrl,
- .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl),
-};
-
-static struct platform_device netxbig_v2_leds = {
- .name = "leds-netxbig",
- .id = -1,
- .dev = {
- .platform_data = &net2big_v2_leds_data,
- },
-};
-
-void __init netxbig_init(void)
-{
-
- if (of_machine_is_compatible("lacie,net5big_v2"))
- netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
- platform_device_register(&netxbig_v2_leds);
-}
projects / karo-tx-linux.git / commitdiff