#ifndef _BCMDEVS_H
#define _BCMDEVS_H
-/* DONGLE VID/PIDs */
-#define BCM_DNGL_VID 0x0a5c
-#define BCM_DNGL_BDC_PID 0x0bdc
-
#define BCM4325_D11DUAL_ID 0x431b
#define BCM4325_D11G_ID 0x431c
#define BCM4325_D11A_ID 0x431d
-#define BCM4329_D11N_ID 0x432e /* 4329 802.11n dualband device */
+
#define BCM4329_D11N2G_ID 0x432f /* 4329 802.11n 2.4G device */
#define BCM4329_D11N5G_ID 0x4330 /* 4329 802.11n 5G device */
#define BCM4329_D11NDUAL_ID 0x432e
#define BCM4319_D11N5G_ID 0x4339 /* 4319 802.11n 5G device */
#define BCM43224_D11N_ID 0x4353 /* 43224 802.11n dualband device */
+
#define BCM43225_D11N2G_ID 0x4357 /* 43225 802.11n 2.4GHz device */
#define BCM43236_D11N_ID 0x4346 /* 43236 802.11n dualband device */
#define BCM43236_D11N2G_ID 0x4347 /* 43236 802.11n 2.4GHz device */
-#define BCM43236_D11N5G_ID 0x4348 /* 43236 802.11n 5GHz device */
-#define BCM43421_D11N_ID 0xA99D /* 43421 802.11n dualband device */
#define BCM4313_D11N2G_ID 0x4727 /* 4313 802.11n 2.4G device */
-#define BCM4330_D11N_ID 0x4360 /* 4330 802.11n dualband device */
-#define BCM4330_D11N2G_ID 0x4361 /* 4330 802.11n 2.4G device */
-#define BCM4330_D11N5G_ID 0x4362 /* 4330 802.11n 5G device */
-#define BCM4336_D11N_ID 0x4343 /* 4336 802.11n 2.4GHz device */
-#define BCM6362_D11N_ID 0x435f /* 6362 802.11n dualband device */
-#define BCM4331_D11N_ID 0x4331 /* 4331 802.11n dualband id */
-#define BCM4331_D11N2G_ID 0x4332 /* 4331 802.11n 2.4Ghz band id */
-#define BCM4331_D11N5G_ID 0x4333 /* 4331 802.11n 5Ghz band id */
/* Chip IDs */
#define BCM4313_CHIP_ID 0x4313 /* 4313 chip id */
#define BCM43224_CHIP_ID 43224 /* 43224 chipcommon chipid */
#define BCM43225_CHIP_ID 43225 /* 43225 chipcommon chipid */
-#define BCM43228_CHIP_ID 43228 /* 43228 chipcommon chipid */
#define BCM43421_CHIP_ID 43421 /* 43421 chipcommon chipid */
#define BCM43235_CHIP_ID 43235 /* 43235 chipcommon chipid */
#define BCM43236_CHIP_ID 43236 /* 43236 chipcommon chipid */
/* Package IDs */
#define BCM4329_289PIN_PKG_ID 0 /* 4329 289-pin package id */
#define BCM4329_182PIN_PKG_ID 1 /* 4329N 182-pin package id */
-#define BCM4716_PKG_ID 8 /* 4716 package id */
#define BCM4717_PKG_ID 9 /* 4717 package id */
#define BCM4718_PKG_ID 10 /* 4718 package id */
-#define BCM5356_PKG_NONMODE 1 /* 5356 package without nmode suppport */
-#define BCM5358U_PKG_ID 8 /* 5358U package id */
-#define BCM5358_PKG_ID 9 /* 5358 package id */
-#define BCM47186_PKG_ID 10 /* 47186 package id */
-#define BCM5357_PKG_ID 11 /* 5357 package id */
-#define BCM5356U_PKG_ID 12 /* 5356U package id */
-#define HDLSIM5350_PKG_ID 1 /* HDL simulator package id for a 5350 */
#define HDLSIM_PKG_ID 14 /* HDL simulator package id */
#define HWSIM_PKG_ID 15 /* Hardware simulator package id */
-#define BCM43224_FAB_CSM 0x8 /* the chip is manufactured by CSM */
#define BCM43224_FAB_SMIC 0xa /* the chip is manufactured by SMIC */
-#define BCM4336_WLBGA_PKG_ID 0x8
/* boardflags */
-#define BFL_RESERVED1 0x00000001
#define BFL_PACTRL 0x00000002 /* Board has gpio 9 controlling the PA */
-#define BFL_AIRLINEMODE 0x00000004 /* Board implements gpio 13 radio disable indication */
-#define BFL_ADCDIV 0x00000008 /* Board has the rssi ADC divider */
-#define BFL_ENETROBO 0x00000010 /* Board has robo switch or core */
#define BFL_NOPLLDOWN 0x00000020 /* Not ok to power down the chip pll and oscillator */
-#define BFL_CCKHIPWR 0x00000040 /* Can do high-power CCK transmission */
-#define BFL_ENETADM 0x00000080 /* Board has ADMtek switch */
-#define BFL_ENETVLAN 0x00000100 /* Board has VLAN capability */
-#define BFL_NOPCI 0x00000400 /* Board leaves PCI floating */
#define BFL_FEM 0x00000800 /* Board supports the Front End Module */
#define BFL_EXTLNA 0x00001000 /* Board has an external LNA in 2.4GHz band */
-#define BFL_HGPA 0x00002000 /* Board has a high gain PA */
-#define BFL_RESERVED2 0x00004000
-#define BFL_ALTIQ 0x00008000 /* Alternate I/Q settings */
#define BFL_NOPA 0x00010000 /* Board has no PA */
-#define BFL_RSSIINV 0x00020000 /* Board's RSSI uses positive slope(not TSSI) */
-#define BFL_PAREF 0x00040000 /* Board uses the PARef LDO */
-#define BFL_3TSWITCH 0x00080000 /* Board uses a triple throw switch shared with BT */
-#define BFL_PHASESHIFT 0x00100000 /* Board can support phase shifter */
#define BFL_BUCKBOOST 0x00200000 /* Power topology uses BUCKBOOST */
#define BFL_FEM_BT 0x00400000 /* Board has FEM and switch to share antenna w/ BT */
#define BFL_NOCBUCK 0x00800000 /* Power topology doesn't use CBUCK */
-#define BFL_CCKFAVOREVM 0x01000000 /* Favor CCK EVM over spectral mask */
#define BFL_PALDO 0x02000000 /* Power topology uses PALDO */
-#define BFL_LNLDO2_2P5 0x04000000 /* Select 2.5V as LNLDO2 output voltage */
-#define BFL_FASTPWR 0x08000000
-#define BFL_UCPWRCTL_MININDX 0x08000000 /* Enforce min power index to avoid FEM damage */
#define BFL_EXTLNA_5GHz 0x10000000 /* Board has an external LNA in 5GHz band */
-#define BFL_TRSW_1by2 0x20000000 /* Board has 2 TRSW's in 1by2 designs */
-#define BFL_LO_TRSW_R_5GHz 0x40000000 /* In 5G do not throw TRSW to T for clipLO gain */
-#define BFL_ELNA_GAINDEF 0x80000000 /* Backoff InitGain based on elna_2g/5g field
- * when this flag is set
- */
/* boardflags2 */
#define BFL2_RXBB_INT_REG_DIS 0x00000001 /* Board has an external rxbb regulator */
#define BFL2_2X4_DIV 0x00000008 /* Board supports the 2X4 diversity switch */
#define BFL2_5G_PWRGAIN 0x00000010 /* Board supports 5G band power gain */
#define BFL2_PCIEWAR_OVR 0x00000020 /* Board overrides ASPM and Clkreq settings */
-#define BFL2_CAESERS_BRD 0x00000040 /* Board is Caesers brd (unused by sw) */
#define BFL2_LEGACY 0x00000080
#define BFL2_SKWRKFEM_BRD 0x00000100 /* 4321mcm93 board uses Skyworks FEM */
#define BFL2_SPUR_WAR 0x00000200 /* Board has a WAR for clock-harmonic spurs */
#define BFL2_GPLL_WAR 0x00000400 /* Flag to narrow G-band PLL loop b/w */
-#define BFL2_TRISTATE_LED 0x00000800 /* Tri-state the LED */
#define BFL2_SINGLEANT_CCK 0x00001000 /* Tx CCK pkts on Ant 0 only */
#define BFL2_2G_SPUR_WAR 0x00002000 /* WAR to reduce and avoid clock-harmonic spurs in 2G */
-#define BFL2_BPHY_ALL_TXCORES 0x00004000 /* Transmit bphy frames using all tx cores */
-#define BFL2_FCC_BANDEDGE_WAR 0x00008000 /* using 40Mhz LPF for 20Mhz bandedge channels */
#define BFL2_GPLL_WAR2 0x00010000 /* Flag to widen G-band PLL loop b/w */
#define BFL2_IPALVLSHIFT_3P3 0x00020000
#define BFL2_INTERNDET_TXIQCAL 0x00040000 /* Use internal envelope detector for TX IQCAL */
*/
/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
-#define BOARD_GPIO_RESERVED1 0x010
-#define BOARD_GPIO_RESERVED2 0x020
-#define BOARD_GPIO_RESERVED3 0x080
-#define BOARD_GPIO_RESERVED4 0x100
#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */
#define BOARD_GPIO_12 0x1000 /* gpio 12 */
#define BOARD_GPIO_13 0x2000 /* gpio 13 */
-#define BOARD_GPIO_RESERVED5 0x0800
-#define BOARD_GPIO_RESERVED6 0x2000
-#define BOARD_GPIO_RESERVED7 0x4000
-#define BOARD_GPIO_RESERVED8 0x8000
#define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
-#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
#define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal power-up */
#define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL power-down */
/* power control defines */
#define PLL_DELAY 150 /* us pll on delay */
#define FREF_DELAY 200 /* us fref change delay */
-#define MIN_SLOW_CLK 32 /* us Slow clock period */
#define XTAL_ON_DELAY 1000 /* us crystal power-on delay */
-/* # of GPIO pins */
-#define GPIO_NUMPINS 16
-
/* Reference board types */
#define SPI_BOARD 0x0402
projects / karo-tx-linux.git / commitdiff