]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
drivers/rtc/rtc-sirfsoc.c: add rtc drivers for CSR SiRFprimaII and SiRFatlasVI
authorXianglong Du <Xianglong.Du@csr.com>
Wed, 3 Jul 2013 22:08:04 +0000 (15:08 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Wed, 3 Jul 2013 23:08:01 +0000 (16:08 -0700)
On CSR SiRFprimaII/atlasVI, there is a programmable 16-bit divider
(RTC_DIV) that divides the input 32.768KHz clock to the frequency that
users need (E.g.  1 Hz).  The divided real-time clock will be used to
drive a 32-bit counter (RTC_COUNTER) that provides users with the actual
time.

In each cycle of the divided real-time clock, there is a Hertz interrupt
generated to the RISC.  Users can also configure an alarm (RTC_ALARM).
When RTC_COUNTER matches the alarm, there will be an alarm interrupt
generated to the RISC.

The system RTC can generate an alarm wake-up signal to notify the power
controller to wake up from power saving mode.

Signed-off-by: Xianglong Du <Xianglong.Du@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/arm/boot/dts/atlas6.dtsi
arch/arm/boot/dts/prima2.dtsi
drivers/rtc/Kconfig
drivers/rtc/Makefile
drivers/rtc/rtc-sirfsoc.c [new file with mode: 0644]

index 7d1a27949c13716c41e0fc3b72dd40b6998aff23..9866cd736deea9143ac684b3c5d5313e658ab391 100644 (file)
                };
 
                rtc-iobg {
-                       compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
+                       compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus";
                        #address-cells = <1>;
                        #size-cells = <1>;
                        reg = <0x80030000 0x10000>;
index 02edd8965f8ae3f9f6f710a3290f4d84f7eb7a5e..05e9489cf95c835f4442e90fb47fd3eb92900e79 100644 (file)
                };
 
                rtc-iobg {
-                       compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
+                       compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus";
                        #address-cells = <1>;
                        #size-cells = <1>;
                        reg = <0x80030000 0x10000>;
index 8009e5d8776a4a00c1a2c3f3f35edd9d7a02581e..9e3498bf302b3ba659f4b89d9a5de7a088af1c15 100644 (file)
@@ -1242,6 +1242,13 @@ config RTC_DRV_SNVS
           This driver can also be built as a module, if so, the module
           will be called "rtc-snvs".
 
+config RTC_DRV_SIRFSOC
+       tristate "SiRFSOC RTC"
+       depends on ARCH_SIRF
+       help
+         Say "yes" here to support the real time clock on SiRF SOC chips.
+         This driver can also be built as a module called rtc-sirfsoc.
+
 comment "HID Sensor RTC drivers"
 
 config RTC_DRV_HID_SENSOR_TIME
index 994a2fac82774d3e38029996d8745141c7679dfd..d3b4488f48f2405541d401f750c5894b559b4781 100644 (file)
@@ -129,3 +129,4 @@ obj-$(CONFIG_RTC_DRV_VT8500)        += rtc-vt8500.o
 obj-$(CONFIG_RTC_DRV_WM831X)   += rtc-wm831x.o
 obj-$(CONFIG_RTC_DRV_WM8350)   += rtc-wm8350.o
 obj-$(CONFIG_RTC_DRV_X1205)    += rtc-x1205.o
+obj-$(CONFIG_RTC_DRV_SIRFSOC)  += rtc-sirfsoc.o
diff --git a/drivers/rtc/rtc-sirfsoc.c b/drivers/rtc/rtc-sirfsoc.c
new file mode 100644 (file)
index 0000000..aa7ed4b
--- /dev/null
@@ -0,0 +1,475 @@
+/*
+ * SiRFSoC Real Time Clock interface for Linux
+ *
+ * Copyright (c) 2013 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/rtc/sirfsoc_rtciobrg.h>
+
+
+#define RTC_CN                 0x00
+#define RTC_ALARM0             0x04
+#define RTC_ALARM1             0x18
+#define RTC_STATUS             0x08
+#define RTC_SW_VALUE            0x40
+#define SIRFSOC_RTC_AL1E       (1<<6)
+#define SIRFSOC_RTC_AL1                (1<<4)
+#define SIRFSOC_RTC_HZE                (1<<3)
+#define SIRFSOC_RTC_AL0E       (1<<2)
+#define SIRFSOC_RTC_HZ         (1<<1)
+#define SIRFSOC_RTC_AL0                (1<<0)
+#define RTC_DIV                        0x0c
+#define RTC_DEEP_CTRL          0x14
+#define RTC_CLOCK_SWITCH       0x1c
+#define SIRFSOC_RTC_CLK                0x03    /* others are reserved */
+
+/* Refer to RTC DIV switch */
+#define RTC_HZ                 16
+
+/* This macro is also defined in arch/arm/plat-sirfsoc/cpu.c */
+#define RTC_SHIFT              4
+
+#define INTR_SYSRTC_CN         0x48
+
+struct sirfsoc_rtc_drv {
+       struct rtc_device       *rtc;
+       u32                     rtc_base;
+       u32                     irq;
+       /* Overflow for every 8 years extra time */
+       u32                     overflow_rtc;
+#ifdef CONFIG_PM
+       u32             saved_counter;
+       u32             saved_overflow_rtc;
+#endif
+};
+
+static int sirfsoc_rtc_read_alarm(struct device *dev,
+               struct rtc_wkalrm *alrm)
+{
+       unsigned long rtc_alarm, rtc_count;
+       struct sirfsoc_rtc_drv *rtcdrv;
+
+       rtcdrv = (struct sirfsoc_rtc_drv *)dev_get_drvdata(dev);
+
+       local_irq_disable();
+
+       rtc_count = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN);
+
+       rtc_alarm = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_ALARM0);
+       memset(alrm, 0, sizeof(struct rtc_wkalrm));
+
+       /*
+        * assume alarm interval not beyond one round counter overflow_rtc:
+        * 0->0xffffffff
+        */
+       /* if alarm is in next overflow cycle */
+       if (rtc_count > rtc_alarm)
+               rtc_time_to_tm((rtcdrv->overflow_rtc + 1)
+                               << (BITS_PER_LONG - RTC_SHIFT)
+                               | rtc_alarm >> RTC_SHIFT, &(alrm->time));
+       else
+               rtc_time_to_tm(rtcdrv->overflow_rtc
+                               << (BITS_PER_LONG - RTC_SHIFT)
+                               | rtc_alarm >> RTC_SHIFT, &(alrm->time));
+       if (sirfsoc_rtc_iobrg_readl(
+                       rtcdrv->rtc_base + RTC_STATUS) & SIRFSOC_RTC_AL0E)
+               alrm->enabled = 1;
+       local_irq_enable();
+
+       return 0;
+}
+
+static int sirfsoc_rtc_set_alarm(struct device *dev,
+               struct rtc_wkalrm *alrm)
+{
+       unsigned long rtc_status_reg, rtc_alarm;
+       struct sirfsoc_rtc_drv *rtcdrv;
+       rtcdrv = (struct sirfsoc_rtc_drv *)dev_get_drvdata(dev);
+
+       if (alrm->enabled) {
+               rtc_tm_to_time(&(alrm->time), &rtc_alarm);
+
+               local_irq_disable();
+
+               rtc_status_reg = sirfsoc_rtc_iobrg_readl(
+                               rtcdrv->rtc_base + RTC_STATUS);
+               if (rtc_status_reg & SIRFSOC_RTC_AL0E) {
+                       /*
+                        * An ongoing alarm in progress - ingore it and not
+                        * to return EBUSY
+                        */
+                       dev_info(dev, "An old alarm was set, will be replaced by a new one\n");
+               }
+
+               sirfsoc_rtc_iobrg_writel(
+                       rtc_alarm << RTC_SHIFT, rtcdrv->rtc_base + RTC_ALARM0);
+               rtc_status_reg &= ~0x07; /* mask out the lower status bits */
+               /*
+                * This bit RTC_AL sets it as a wake-up source for Sleep Mode
+                * Writing 1 into this bit will clear it
+                */
+               rtc_status_reg |= SIRFSOC_RTC_AL0;
+               /* enable the RTC alarm interrupt */
+               rtc_status_reg |= SIRFSOC_RTC_AL0E;
+               sirfsoc_rtc_iobrg_writel(
+                       rtc_status_reg, rtcdrv->rtc_base + RTC_STATUS);
+               local_irq_enable();
+       } else {
+               /*
+                * if this function was called with enabled=0
+                * then it could mean that the application is
+                * trying to cancel an ongoing alarm
+                */
+               local_irq_disable();
+
+               rtc_status_reg = sirfsoc_rtc_iobrg_readl(
+                               rtcdrv->rtc_base + RTC_STATUS);
+               if (rtc_status_reg & SIRFSOC_RTC_AL0E) {
+                       /* clear the RTC status register's alarm bit */
+                       rtc_status_reg &= ~0x07;
+                       /* write 1 into SIRFSOC_RTC_AL0 to force a clear */
+                       rtc_status_reg |= (SIRFSOC_RTC_AL0);
+                       /* Clear the Alarm enable bit */
+                       rtc_status_reg &= ~(SIRFSOC_RTC_AL0E);
+
+                       sirfsoc_rtc_iobrg_writel(rtc_status_reg,
+                                       rtcdrv->rtc_base + RTC_STATUS);
+               }
+
+               local_irq_enable();
+       }
+
+       return 0;
+}
+
+static int sirfsoc_rtc_read_time(struct device *dev,
+               struct rtc_time *tm)
+{
+       unsigned long tmp_rtc = 0;
+       struct sirfsoc_rtc_drv *rtcdrv;
+       rtcdrv = (struct sirfsoc_rtc_drv *)dev_get_drvdata(dev);
+       /*
+        * This patch is taken from WinCE - Need to validate this for
+        * correctness. To work around sirfsoc RTC counter double sync logic
+        * fail, read several times to make sure get stable value.
+        */
+       do {
+               tmp_rtc = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN);
+               cpu_relax();
+       } while (tmp_rtc != sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN));
+
+       rtc_time_to_tm(rtcdrv->overflow_rtc << (BITS_PER_LONG - RTC_SHIFT) |
+                                       tmp_rtc >> RTC_SHIFT, tm);
+       return 0;
+}
+
+static int sirfsoc_rtc_set_time(struct device *dev,
+               struct rtc_time *tm)
+{
+       unsigned long rtc_time;
+       struct sirfsoc_rtc_drv *rtcdrv;
+       rtcdrv = (struct sirfsoc_rtc_drv *)dev_get_drvdata(dev);
+
+       rtc_tm_to_time(tm, &rtc_time);
+
+       rtcdrv->overflow_rtc = rtc_time >> (BITS_PER_LONG - RTC_SHIFT);
+
+       sirfsoc_rtc_iobrg_writel(rtcdrv->overflow_rtc,
+                       rtcdrv->rtc_base + RTC_SW_VALUE);
+       sirfsoc_rtc_iobrg_writel(
+                       rtc_time << RTC_SHIFT, rtcdrv->rtc_base + RTC_CN);
+
+       return 0;
+}
+
+static int sirfsoc_rtc_ioctl(struct device *dev, unsigned int cmd,
+               unsigned long arg)
+{
+       switch (cmd) {
+       case RTC_PIE_ON:
+       case RTC_PIE_OFF:
+       case RTC_UIE_ON:
+       case RTC_UIE_OFF:
+       case RTC_AIE_ON:
+       case RTC_AIE_OFF:
+               return 0;
+
+       default:
+               return -ENOIOCTLCMD;
+       }
+}
+
+static const struct rtc_class_ops sirfsoc_rtc_ops = {
+       .read_time = sirfsoc_rtc_read_time,
+       .set_time = sirfsoc_rtc_set_time,
+       .read_alarm = sirfsoc_rtc_read_alarm,
+       .set_alarm = sirfsoc_rtc_set_alarm,
+       .ioctl = sirfsoc_rtc_ioctl
+};
+
+static irqreturn_t sirfsoc_rtc_irq_handler(int irq, void *pdata)
+{
+       struct sirfsoc_rtc_drv *rtcdrv = pdata;
+       unsigned long rtc_status_reg = 0x0;
+       unsigned long events = 0x0;
+
+       rtc_status_reg = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_STATUS);
+       /* this bit will be set ONLY if an alarm was active
+        * and it expired NOW
+        * So this is being used as an ASSERT
+        */
+       if (rtc_status_reg & SIRFSOC_RTC_AL0) {
+               /*
+                * clear the RTC status register's alarm bit
+                * mask out the lower status bits
+                */
+               rtc_status_reg &= ~0x07;
+               /* write 1 into SIRFSOC_RTC_AL0 to ACK the alarm interrupt */
+               rtc_status_reg |= (SIRFSOC_RTC_AL0);
+               /* Clear the Alarm enable bit */
+               rtc_status_reg &= ~(SIRFSOC_RTC_AL0E);
+       }
+       sirfsoc_rtc_iobrg_writel(rtc_status_reg, rtcdrv->rtc_base + RTC_STATUS);
+       /* this should wake up any apps polling/waiting on the read
+        * after setting the alarm
+        */
+       events |= RTC_IRQF | RTC_AF;
+       rtc_update_irq(rtcdrv->rtc, 1, events);
+
+       return IRQ_HANDLED;
+}
+
+static const struct of_device_id sirfsoc_rtc_of_match[] = {
+       { .compatible = "sirf,prima2-sysrtc"},
+       {},
+};
+MODULE_DEVICE_TABLE(of, sirfsoc_rtc_of_match);
+
+static int sirfsoc_rtc_probe(struct platform_device *pdev)
+{
+       int err;
+       unsigned long rtc_div;
+       struct sirfsoc_rtc_drv *rtcdrv;
+       struct device_node *np = pdev->dev.of_node;
+
+       rtcdrv = devm_kzalloc(&pdev->dev,
+               sizeof(struct sirfsoc_rtc_drv), GFP_KERNEL);
+       if (rtcdrv == NULL) {
+               dev_err(&pdev->dev,
+                       "%s: can't alloc mem for drv struct\n",
+                       pdev->name);
+               return -ENOMEM;
+       }
+
+       err = of_property_read_u32(np, "reg", &rtcdrv->rtc_base);
+       if (err) {
+               dev_err(&pdev->dev, "unable to find base address of rtc node in dtb\n");
+               goto error;
+       }
+
+       platform_set_drvdata(pdev, rtcdrv);
+
+       /* Register rtc alarm as a wakeup source */
+       device_init_wakeup(&pdev->dev, 1);
+
+       /*
+        * Set SYS_RTC counter in RTC_HZ HZ Units
+        * We are using 32K RTC crystal (32768 / RTC_HZ / 2) -1
+        * If 16HZ, therefore RTC_DIV = 1023;
+        */
+       rtc_div = ((32768 / RTC_HZ) / 2) - 1;
+       sirfsoc_rtc_iobrg_writel(rtc_div, rtcdrv->rtc_base + RTC_DIV);
+
+       rtcdrv->rtc = rtc_device_register(pdev->name, &(pdev->dev),
+                       &sirfsoc_rtc_ops, THIS_MODULE);
+       if (IS_ERR(rtcdrv->rtc)) {
+               err = PTR_ERR(rtcdrv->rtc);
+               dev_err(&pdev->dev, "can't register RTC device\n");
+               return err;
+       }
+
+       /* 0x3 -> RTC_CLK */
+       sirfsoc_rtc_iobrg_writel(SIRFSOC_RTC_CLK,
+                       rtcdrv->rtc_base + RTC_CLOCK_SWITCH);
+
+       /* reset SYS RTC ALARM0 */
+       sirfsoc_rtc_iobrg_writel(0x0, rtcdrv->rtc_base + RTC_ALARM0);
+
+       /* reset SYS RTC ALARM1 */
+       sirfsoc_rtc_iobrg_writel(0x0, rtcdrv->rtc_base + RTC_ALARM1);
+
+       /* Restore RTC Overflow From Register After Command Reboot */
+       rtcdrv->overflow_rtc =
+               sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_SW_VALUE);
+
+       rtcdrv->irq = platform_get_irq(pdev, 0);
+       err = devm_request_irq(
+                       &pdev->dev,
+                       rtcdrv->irq,
+                       sirfsoc_rtc_irq_handler,
+                       IRQF_SHARED,
+                       pdev->name,
+                       rtcdrv);
+       if (err) {
+               dev_err(&pdev->dev, "Unable to register for the SiRF SOC RTC IRQ\n");
+               goto error;
+       }
+
+       return 0;
+
+error:
+       if (rtcdrv->rtc)
+               rtc_device_unregister(rtcdrv->rtc);
+
+       return err;
+}
+
+static int sirfsoc_rtc_remove(struct platform_device *pdev)
+{
+       struct sirfsoc_rtc_drv *rtcdrv = platform_get_drvdata(pdev);
+
+       device_init_wakeup(&pdev->dev, 0);
+       rtc_device_unregister(rtcdrv->rtc);
+
+       return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int sirfsoc_rtc_suspend(struct device *dev)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct sirfsoc_rtc_drv *rtcdrv = platform_get_drvdata(pdev);
+       rtcdrv->overflow_rtc =
+               sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_SW_VALUE);
+
+       rtcdrv->saved_counter =
+               sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN);
+       rtcdrv->saved_overflow_rtc = rtcdrv->overflow_rtc;
+       if (device_may_wakeup(&pdev->dev))
+               enable_irq_wake(rtcdrv->irq);
+
+       return 0;
+}
+
+static int sirfsoc_rtc_freeze(struct device *dev)
+{
+       sirfsoc_rtc_suspend(dev);
+
+       return 0;
+}
+
+static int sirfsoc_rtc_thaw(struct device *dev)
+{
+       u32 tmp;
+       struct sirfsoc_rtc_drv *rtcdrv;
+       rtcdrv = (struct sirfsoc_rtc_drv *)dev_get_drvdata(dev);
+
+       /*
+        * if resume from snapshot and the rtc power is losed,
+        * restroe the rtc settings
+        */
+       if (SIRFSOC_RTC_CLK != sirfsoc_rtc_iobrg_readl(
+                       rtcdrv->rtc_base + RTC_CLOCK_SWITCH)) {
+               u32 rtc_div;
+               /* 0x3 -> RTC_CLK */
+               sirfsoc_rtc_iobrg_writel(SIRFSOC_RTC_CLK,
+                       rtcdrv->rtc_base + RTC_CLOCK_SWITCH);
+               /*
+                * Set SYS_RTC counter in RTC_HZ HZ Units
+                * We are using 32K RTC crystal (32768 / RTC_HZ / 2) -1
+                * If 16HZ, therefore RTC_DIV = 1023;
+                */
+               rtc_div = ((32768 / RTC_HZ) / 2) - 1;
+
+               sirfsoc_rtc_iobrg_writel(rtc_div, rtcdrv->rtc_base + RTC_DIV);
+
+               /* reset SYS RTC ALARM0 */
+               sirfsoc_rtc_iobrg_writel(0x0, rtcdrv->rtc_base + RTC_ALARM0);
+
+               /* reset SYS RTC ALARM1 */
+               sirfsoc_rtc_iobrg_writel(0x0, rtcdrv->rtc_base + RTC_ALARM1);
+       }
+       rtcdrv->overflow_rtc = rtcdrv->saved_overflow_rtc;
+
+       /*
+        * if current counter is small than previous,
+        * it means overflow in sleep
+        */
+       tmp = sirfsoc_rtc_iobrg_readl(rtcdrv->rtc_base + RTC_CN);
+       if (tmp <= rtcdrv->saved_counter)
+               rtcdrv->overflow_rtc++;
+       /*
+        *PWRC Value Be Changed When Suspend, Restore Overflow
+        * In Memory To Register
+        */
+       sirfsoc_rtc_iobrg_writel(rtcdrv->overflow_rtc,
+                       rtcdrv->rtc_base + RTC_SW_VALUE);
+
+       return 0;
+}
+
+static int sirfsoc_rtc_resume(struct device *dev)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct sirfsoc_rtc_drv *rtcdrv = platform_get_drvdata(pdev);
+       sirfsoc_rtc_thaw(dev);
+       if (device_may_wakeup(&pdev->dev))
+               disable_irq_wake(rtcdrv->irq);
+
+       return 0;
+}
+
+static int sirfsoc_rtc_restore(struct device *dev)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct sirfsoc_rtc_drv *rtcdrv = platform_get_drvdata(pdev);
+
+       if (device_may_wakeup(&pdev->dev))
+               disable_irq_wake(rtcdrv->irq);
+       return 0;
+}
+
+#else
+#define sirfsoc_rtc_suspend    NULL
+#define sirfsoc_rtc_resume     NULL
+#define sirfsoc_rtc_freeze     NULL
+#define sirfsoc_rtc_thaw       NULL
+#define sirfsoc_rtc_restore    NULL
+#endif
+
+static const struct dev_pm_ops sirfsoc_rtc_pm_ops = {
+       .suspend = sirfsoc_rtc_suspend,
+       .resume = sirfsoc_rtc_resume,
+       .freeze = sirfsoc_rtc_freeze,
+       .thaw = sirfsoc_rtc_thaw,
+       .restore = sirfsoc_rtc_restore,
+};
+
+static struct platform_driver sirfsoc_rtc_driver = {
+       .driver = {
+               .name = "sirfsoc-rtc",
+               .owner = THIS_MODULE,
+#ifdef CONFIG_PM
+               .pm = &sirfsoc_rtc_pm_ops,
+#endif
+               .of_match_table = of_match_ptr(sirfsoc_rtc_of_match),
+       },
+       .probe = sirfsoc_rtc_probe,
+       .remove = sirfsoc_rtc_remove,
+};
+module_platform_driver(sirfsoc_rtc_driver);
+
+MODULE_DESCRIPTION("SiRF SoC rtc driver");
+MODULE_AUTHOR("Xianglong Du <Xianglong.Du@csr.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sirfsoc-rtc");