* filter those response frames except in the case of frames that
* are buffered in the driver -- those must remain buffered to avoid
* reordering. Because it is possible that no frames are released
- * in this case, the driver must call ieee80211_sta_eosp_irqsafe()
+ * in this case, the driver must call ieee80211_sta_eosp()
* to indicate to mac80211 that the service period ended anyway.
*
* Finally, if frames from multiple TIDs are released from mac80211
* but the driver might reorder them, it must clear & set the flags
* appropriately (only the last frame may have %IEEE80211_TX_STATUS_EOSP)
* and also take care of the EOSP and MORE_DATA bits in the frame.
- * The driver may also use ieee80211_sta_eosp_irqsafe() in this case.
+ * The driver may also use ieee80211_sta_eosp() in this case.
*/
/**
* setting the EOSP flag in the QoS header of the frames. Also, when the
* service period ends, the driver must set %IEEE80211_TX_STATUS_EOSP
* on the last frame in the SP. Alternatively, it may call the function
- * ieee80211_sta_eosp_irqsafe() to inform mac80211 of the end of the SP.
+ * ieee80211_sta_eosp() to inform mac80211 of the end of the SP.
* This callback must be atomic.
* @allow_buffered_frames: Prepare device to allow the given number of frames
* to go out to the given station. The frames will be sent by mac80211
* them between the TIDs, it must set the %IEEE80211_TX_STATUS_EOSP flag
* on the last frame and clear it on all others and also handle the EOSP
* bit in the QoS header correctly. Alternatively, it can also call the
- * ieee80211_sta_eosp_irqsafe() function.
+ * ieee80211_sta_eosp() function.
* The @tids parameter is a bitmap and tells the driver which TIDs the
* frames will be on; it will at most have two bits set.
* This callback must be atomic.
* %IEEE80211_TX_STATUS_EOSP bit and call this function instead.
* This applies for PS-Poll as well as uAPSD.
*
- * Note that there is no non-_irqsafe version right now as
- * it wasn't needed, but just like _tx_status() and _rx()
- * must not be mixed in irqsafe/non-irqsafe versions, this
- * function must not be mixed with those either. Use the
- * all irqsafe, or all non-irqsafe, don't mix! If you need
- * the non-irqsafe version of this, you need to add it.
+ * Note that just like with _tx_status() and _rx() drivers must
+ * not mix calls to irqsafe/non-irqsafe versions, this function
+ * must not be mixed with those either. Use the all irqsafe, or
+ * all non-irqsafe, don't mix!
+ *
+ * NB: the _irqsafe version of this function doesn't exist, no
+ * driver needs it right now. Don't call this function if
+ * you'd need the _irqsafe version, look at the git history
+ * and restore the _irqsafe version!
*/
-void ieee80211_sta_eosp_irqsafe(struct ieee80211_sta *pubsta);
+void ieee80211_sta_eosp(struct ieee80211_sta *pubsta);
/**
* ieee80211_iter_keys - iterate keys programmed into the device
static void ieee80211_tasklet_handler(unsigned long data)
{
struct ieee80211_local *local = (struct ieee80211_local *) data;
- struct sta_info *sta, *tmp;
- struct skb_eosp_msg_data *eosp_data;
struct sk_buff *skb;
while ((skb = skb_dequeue(&local->skb_queue)) ||
skb->pkt_type = 0;
ieee80211_tx_status(&local->hw, skb);
break;
- case IEEE80211_EOSP_MSG:
- eosp_data = (void *)skb->cb;
- for_each_sta_info(local, eosp_data->sta, sta, tmp) {
- /* skip wrong virtual interface */
- if (memcmp(eosp_data->iface,
- sta->sdata->vif.addr, ETH_ALEN))
- continue;
- clear_sta_flag(sta, WLAN_STA_SP);
- break;
- }
- dev_kfree_skb(skb);
- break;
default:
WARN(1, "mac80211: Packet is of unknown type %d\n",
skb->pkt_type);
}
EXPORT_SYMBOL(ieee80211_sta_block_awake);
-void ieee80211_sta_eosp_irqsafe(struct ieee80211_sta *pubsta)
+void ieee80211_sta_eosp(struct ieee80211_sta *pubsta)
{
struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
struct ieee80211_local *local = sta->local;
- struct sk_buff *skb;
- struct skb_eosp_msg_data *data;
trace_api_eosp(local, pubsta);
- skb = alloc_skb(0, GFP_ATOMIC);
- if (!skb) {
- /* too bad ... but race is better than loss */
- clear_sta_flag(sta, WLAN_STA_SP);
- return;
- }
-
- data = (void *)skb->cb;
- memcpy(data->sta, pubsta->addr, ETH_ALEN);
- memcpy(data->iface, sta->sdata->vif.addr, ETH_ALEN);
- skb->pkt_type = IEEE80211_EOSP_MSG;
- skb_queue_tail(&local->skb_queue, skb);
- tasklet_schedule(&local->tasklet);
+ clear_sta_flag(sta, WLAN_STA_SP);
}
-EXPORT_SYMBOL(ieee80211_sta_eosp_irqsafe);
+EXPORT_SYMBOL(ieee80211_sta_eosp);
void ieee80211_sta_set_buffered(struct ieee80211_sta *pubsta,
u8 tid, bool buffered)