ARM: at91/boards: use -EINVAL for invalid gpio

this will allow to use gpio_is_valid

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>

diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index a60d98d7c3e24b8947b6d3b949ef8bc6b1a1357d..2628384aaae1fd034219a258ebfe16892b553955 100644 (file)
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -70,6 +70,8 @@ static struct macb_platform_data __initdata onearm_eth_data = {
 
 static struct at91_usbh_data __initdata onearm_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata onearm_udc_data = {

diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 17fc77925707fcd30ab7c41696158a54e4d85d33..3bb40694b02db20599fa4c87f2867b0513e1bff0 100644 (file)
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -75,6 +75,8 @@ static void __init afeb9260_init_early(void)
  */
 static struct at91_usbh_data __initdata afeb9260_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -82,7 +84,7 @@ static struct at91_usbh_data __initdata afeb9260_usbh_data = {
  */
 static struct at91_udc_data __initdata afeb9260_udc_data = {
        .vbus_pin       = AT91_PIN_PC5,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -138,6 +140,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
        .bus_width_16   = 0,
        .parts          = afeb9260_nand_partition,
        .num_parts      = ARRAY_SIZE(afeb9260_nand_partition),
+       .det_pin        = -EINVAL,
 };
 
 
@@ -149,6 +152,7 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = {
        .wp_pin         = AT91_PIN_PC4,
        .slot_b         = 1,
        .wire4          = 1,
+       .vcc_pin        = -EINVAL,
 };
 
 
@@ -169,6 +173,8 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
 static struct at91_cf_data afeb9260_cf_data = {
        .chipselect = 4,
        .irq_pin    = AT91_PIN_PA6,
+       .det_pin        = -EINVAL,
+       .vcc_pin        = -EINVAL,
        .rst_pin    = AT91_PIN_PA7,
        .flags      = AT91_CF_TRUE_IDE,
 };

diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 18c90c454079f2e296b0ff2344bf3b7e333ff75d..8510e9e54988da5109a093689400cc724566a73f 100644 (file)
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -62,6 +62,8 @@ static void __init cam60_init_early(void)
  */
 static struct at91_usbh_data __initdata cam60_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 
@@ -135,7 +137,7 @@ static struct mtd_partition __initdata cam60_nand_partition[] = {
 static struct atmel_nand_data __initdata cam60_nand_data = {
        .ale            = 21,
        .cle            = 22,
-       // .det_pin     = ... not there
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PA9,
        .enable_pin     = AT91_PIN_PA7,
        .parts          = cam60_nand_partition,

diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 14d1d0556638546b6e38a307f4cf49ba78554a25..ac3de4f7c31d871fa96ebb9a190501c6249fab91 100644 (file)
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -70,6 +70,8 @@ static void __init cap9adk_init_early(void)
  */
 static struct at91_usbh_data __initdata cap9adk_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -144,9 +146,9 @@ static struct spi_board_info cap9adk_spi_devices[] = {
  */
 static struct at91_mmc_data __initdata cap9adk_mmc_data = {
        .wire4          = 1,
-//     .det_pin        = ... not connected
-//     .wp_pin         = ... not connected
-//     .vcc_pin        = ... not connected
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 
@@ -154,6 +156,7 @@ static struct at91_mmc_data __initdata cap9adk_mmc_data = {
  * MACB Ethernet device
  */
 static struct macb_platform_data __initdata cap9adk_macb_data = {
+       .phy_irq_pin    = -EINVAL,
        .is_rmii        = 1,
 };
 
@@ -172,8 +175,8 @@ static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
 static struct atmel_nand_data __initdata cap9adk_nand_data = {
        .ale            = 21,
        .cle            = 22,
-//     .det_pin        = ... not connected
-//     .rdy_pin        = ... not connected
+       .det_pin        = -EINVAL,
+       .rdy_pin        = -EINVAL,
        .enable_pin     = AT91_PIN_PD15,
        .parts          = cap9adk_nand_partitions,
        .num_parts      = ARRAY_SIZE(cap9adk_nand_partitions),
@@ -351,7 +354,7 @@ static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
  * AC97
  */
 static struct ac97c_platform_data cap9adk_ac97_data = {
-//     .reset_pin      = ... not connected
+       .reset_pin      = -EINVAL,
 };
 
 

diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 529b356cdb7d3cfa61a39c2e10944ccd144469b9..59d9cf997537c6b62324d7f34dff1eb7ed45685f 100644 (file)
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -64,6 +64,8 @@ static struct macb_platform_data __initdata carmeva_eth_data = {
 
 static struct at91_usbh_data __initdata carmeva_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata carmeva_udc_data = {
@@ -75,8 +77,8 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
 // static struct at91_cf_data __initdata carmeva_cf_data = {
 //     .det_pin        = AT91_PIN_PB0,
 //     .rst_pin        = AT91_PIN_PC5,
-       // .irq_pin     = ... not connected
-       // .vcc_pin     = ... always powered
+       // .irq_pin     = -EINVAL,
+       // .vcc_pin     = -EINVAL,
 // };
 
 static struct at91_mmc_data __initdata carmeva_mmc_data = {
@@ -84,6 +86,7 @@ static struct at91_mmc_data __initdata carmeva_mmc_data = {
        .wire4          = 1,
        .det_pin        = AT91_PIN_PB10,
        .wp_pin         = AT91_PIN_PC14,
+       .vcc_pin        = -EINVAL,
 };
 
 static struct spi_board_info carmeva_spi_devices[] = {

diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 5b55525e29667db8e0cdf2f0142ae0ab185dfb8f..9ab3d1ea326d445bfe36bda16e37e47119a94f7a 100644 (file)
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -86,6 +86,8 @@ static void __init cpu9krea_init_early(void)
  */
 static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -93,13 +95,14 @@ static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
  */
 static struct at91_udc_data __initdata cpu9krea_udc_data = {
        .vbus_pin       = AT91_PIN_PC8,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /*
  * MACB Ethernet device
  */
 static struct macb_platform_data __initdata cpu9krea_macb_data = {
+       .phy_irq_pin    = -EINVAL,
        .is_rmii        = 1,
 };
 
@@ -112,6 +115,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = {
        .rdy_pin        = AT91_PIN_PC13,
        .enable_pin     = AT91_PIN_PC14,
        .bus_width_16   = 0,
+       .det_pin        = -EINVAL,
 };
 
 #ifdef CONFIG_MACH_CPU9260
@@ -337,6 +341,8 @@ static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
        .det_pin        = AT91_PIN_PA29,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 static void __init cpu9krea_board_init(void)

diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 7a4c82e8da51559edfeda6dafeb743a69eaad953..368e1427ad998af7be547ed2689c6b5a0d0aacf4 100644 (file)
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -83,11 +83,14 @@ static void __init cpuat91_init_early(void)
 }
 
 static struct macb_platform_data __initdata cpuat91_eth_data = {
+       .phy_irq_pin    = -EINVAL,
        .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata cpuat91_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata cpuat91_udc_data = {
@@ -98,6 +101,8 @@ static struct at91_udc_data __initdata cpuat91_udc_data = {
 static struct at91_mmc_data __initdata cpuat91_mmc_data = {
        .det_pin        = AT91_PIN_PC2,
        .wire4          = 1,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 static struct physmap_flash_data cpuat91_flash_data = {

diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index b004b20b8e42d8a6ce2983f972c1e4dbc6bf946d..1a1547b1ce4e61182e2cb2e069dd803ef43e9e19 100644 (file)
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -65,11 +65,13 @@ static struct macb_platform_data __initdata csb337_eth_data = {
 
 static struct at91_usbh_data __initdata csb337_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata csb337_udc_data = {
-       // this has no VBUS sensing pin
        .pullup_pin     = AT91_PIN_PA24,
+       .vbus_pin       = -EINVAL,
 };
 
 static struct i2c_board_info __initdata csb337_i2c_devices[] = {
@@ -98,6 +100,7 @@ static struct at91_mmc_data __initdata csb337_mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
        .wp_pin         = AT91_PIN_PD6,
+       .vcc_pin        = -EINVAL,
 };
 
 static struct spi_board_info csb337_spi_devices[] = {

diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index e966de5219c737c53d31f669fc94bd2432e8a6d9..f650bf39455ddc26070bdcfe96663da074feec73 100644 (file)
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -59,6 +59,8 @@ static struct macb_platform_data __initdata csb637_eth_data = {
 
 static struct at91_usbh_data __initdata csb637_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata csb637_udc_data = {

diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index 41d84d9a2316268e1dec9b7b288d42753339db2d..bb6b434ec0c1c6c868be388603f7b63cfe37b01b 100644 (file)
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -50,6 +50,7 @@ static void __init ek_init_early(void)
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 21,
        .cle            = 22,
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PC8,
        .enable_pin     = AT91_PIN_PC14,
 };

diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 3788fa527121c8d7b99c68ea6a6758348e7513af..d302ca3eeb645f73340f4dc157a77c163a62e044 100644 (file)
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -67,6 +67,8 @@ static struct macb_platform_data __initdata eb9200_eth_data = {
 
 static struct at91_usbh_data __initdata eb9200_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata eb9200_udc_data = {
@@ -75,15 +77,18 @@ static struct at91_udc_data __initdata eb9200_udc_data = {
 };
 
 static struct at91_cf_data __initdata eb9200_cf_data = {
+       .irq_pin        = -EINVAL,
        .det_pin        = AT91_PIN_PB0,
+       .vcc_pin        = -EINVAL,
        .rst_pin        = AT91_PIN_PC5,
-       // .irq_pin     = ... not connected
-       // .vcc_pin     = ... always powered
 };
 
 static struct at91_mmc_data __initdata eb9200_mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 static struct i2c_board_info __initdata eb9200_i2c_devices[] = {

diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index af7622eae1a9edf9b6eb79278c1a9409373b3b54..69966ce4d776d6f5a62cb1de7d91affb456717bc 100644 (file)
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -71,11 +71,16 @@ static struct macb_platform_data __initdata ecb_at91eth_data = {
 
 static struct at91_usbh_data __initdata ecb_at91usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_mmc_data __initdata ecb_at91mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 

diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 8e75867d1d18f65935cbb3e17efd10beb42487b1..07ef35b0ec2cdceecf7e124e705cb842c31b1b62 100644 (file)
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -54,6 +54,8 @@ static struct macb_platform_data __initdata eco920_eth_data = {
 
 static struct at91_usbh_data __initdata eco920_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata eco920_udc_data = {
@@ -64,6 +66,9 @@ static struct at91_udc_data __initdata eco920_udc_data = {
 static struct at91_mmc_data __initdata eco920_mmc_data = {
        .slot_b         = 0,
        .wire4          = 0,
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 static struct physmap_flash_data eco920_flash_data = {

diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 4c3f65d9c59b6732bc403f3e33a1f837c009658b..eec02cd57ced7fe60291f8938a64259f61b0f22a 100644 (file)
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -52,12 +52,14 @@ static void __init flexibity_init_early(void)
 /* USB Host port */
 static struct at91_usbh_data __initdata flexibity_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /* USB Device port */
 static struct at91_udc_data __initdata flexibity_udc_data = {
        .vbus_pin       = AT91_PIN_PC5,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /* SPI devices */
@@ -76,6 +78,7 @@ static struct at91_mmc_data __initdata flexibity_mmc_data = {
        .wire4          = 1,
        .det_pin        = AT91_PIN_PC9,
        .wp_pin         = AT91_PIN_PC4,
+       .vcc_pin        = -EINVAL,
 };
 
 /* LEDs */

diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index de8e09642f4e75e417fc35ba6d9c313451ca4efa..caf017f0f4ee3920e56280b9b89c3541bcde4751 100644 (file)
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -106,6 +106,8 @@ static void __init foxg20_init_early(void)
  */
 static struct at91_usbh_data __initdata foxg20_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -113,7 +115,7 @@ static struct at91_usbh_data __initdata foxg20_usbh_data = {
  */
 static struct at91_udc_data __initdata foxg20_udc_data = {
        .vbus_pin       = AT91_PIN_PC6,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -147,6 +149,9 @@ static struct macb_platform_data __initdata foxg20_macb_data = {
 static struct at91_mmc_data __initdata foxg20_mmc_data = {
        .slot_b         = 1,
        .wire4          = 1,
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 

diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 51c82f15111909fb6229e6420e8cd716e803e114..230e71969fb76c03f0554f12a3a409d037314589 100644 (file)
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -80,6 +80,8 @@ static void __init gsia18s_init_early(void)
  */
 static struct at91_usbh_data __initdata usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -87,7 +89,7 @@ static struct at91_usbh_data __initdata usbh_data = {
  */
 static struct at91_udc_data __initdata udc_data = {
        .vbus_pin       = AT91_PIN_PA22,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /*
@@ -530,6 +532,7 @@ static struct i2c_board_info __initdata gsia18s_i2c_devices[] = {
 static struct at91_cf_data __initdata gsia18s_cf1_data = {
        .irq_pin        = AT91_PIN_PA27,
        .det_pin        = AT91_PIN_PB30,
+       .vcc_pin        = -EINVAL,
        .rst_pin        = AT91_PIN_PB31,
        .chipselect     = 5,
        .flags          = AT91_CF_TRUE_IDE,

diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 9628a3defcf45d62a898b59744da29e344f99763..efde1b2327c8ab839c518b2cc3a7ce6b0a8517a9 100644 (file)
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -68,6 +68,8 @@ static struct macb_platform_data __initdata kafa_eth_data = {
 
 static struct at91_usbh_data __initdata kafa_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata kafa_udc_data = {

diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 5ba5244cb6325b9b064dd0265986abc1c984e734..d75a4a2ad9c20bc9d1e13067c5f6db4d689bbc9c 100644 (file)
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -76,6 +76,8 @@ static struct macb_platform_data __initdata kb9202_eth_data = {
 
 static struct at91_usbh_data __initdata kb9202_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata kb9202_udc_data = {
@@ -87,6 +89,8 @@ static struct at91_mmc_data __initdata kb9202_mmc_data = {
        .det_pin        = AT91_PIN_PB2,
        .slot_b         = 0,
        .wire4          = 1,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 static struct mtd_partition __initdata kb9202_nand_partition[] = {
@@ -100,7 +104,7 @@ static struct mtd_partition __initdata kb9202_nand_partition[] = {
 static struct atmel_nand_data __initdata kb9202_nand_data = {
        .ale            = 22,
        .cle            = 21,
-       // .det_pin     = ... not there
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PC29,
        .enable_pin     = AT91_PIN_PC28,
        .parts          = kb9202_nand_partition,

diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 7d24d84f5d50434e2df82834271c94f20fd2d2bd..3f8617c0e04e27849634c168e34ff2a6b7305e36 100644 (file)
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -72,6 +72,7 @@ static void __init neocore926_init_early(void)
 static struct at91_usbh_data __initdata neocore926_usbh_data = {
        .ports          = 2,
        .vbus_pin       = { AT91_PIN_PA24, AT91_PIN_PA21 },
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -79,7 +80,7 @@ static struct at91_usbh_data __initdata neocore926_usbh_data = {
  */
 static struct at91_udc_data __initdata neocore926_udc_data = {
        .vbus_pin       = AT91_PIN_PA25,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -149,6 +150,7 @@ static struct at91_mmc_data __initdata neocore926_mmc_data = {
        .wire4          = 1,
        .det_pin        = AT91_PIN_PE18,
        .wp_pin         = AT91_PIN_PE19,
+       .vcc_pin        = -EINVAL,
 };
 
 
@@ -190,6 +192,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = {
        .enable_pin             = AT91_PIN_PD15,
        .parts                  = neocore926_nand_partition,
        .num_parts              = ARRAY_SIZE(neocore926_nand_partition),
+       .det_pin                = -EINVAL,
 };
 
 static struct sam9_smc_config __initdata neocore926_nand_smc_config = {

diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 9a6e0216395077f252f8f55316d4ca581dfb6bf1..b4a12fc184c80078e93877795fffec2a38c19bf3 100644 (file)
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -107,6 +107,8 @@ static void __init add_device_pcontrol(void)
  */
 static struct at91_usbh_data __initdata usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 

diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index dc18759a24b49d1fc06336d7eb4c3f0221cd3ce1..ab024fa11d5c7d1011086070178b1e7dc3f04ca6 100644 (file)
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -67,6 +67,8 @@ static struct macb_platform_data __initdata picotux200_eth_data = {
 
 static struct at91_usbh_data __initdata picotux200_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_mmc_data __initdata picotux200_mmc_data = {
@@ -74,6 +76,7 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
        .wp_pin         = AT91_PIN_PA17,
+       .vcc_pin        = -EINVAL,
 };
 
 #define PICOTUX200_FLASH_BASE  AT91_CHIPSELECT_0

diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 8b1bb4c07496cb8d0478cf0009b8aa1d9d09b053..5c3e501ab2f31455f6d4ca651cb15a1cbc89dc16 100644 (file)
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -77,6 +77,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -84,7 +86,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
        .vbus_pin       = AT91_PIN_PC5,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /*
@@ -133,7 +135,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 21,
        .cle            = 22,
-//     .det_pin        = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PC13,
        .enable_pin     = AT91_PIN_PC14,
        .parts          = ek_nand_partition,
@@ -172,9 +174,9 @@ static void __init ek_add_device_nand(void)
 static struct at91_mmc_data __initdata ek_mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
-//     .det_pin        = ... not connected
-//     .wp_pin         = ... not connected
-//     .vcc_pin        = ... not connected
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 /*

diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 022d0cebda9dfad17696709367552cfebf78ed28..782f37946af5b561ea066d491ce51f4cd645c44e 100644 (file)
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -72,6 +72,8 @@ static struct macb_platform_data __initdata dk_eth_data = {
 
 static struct at91_usbh_data __initdata dk_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata dk_udc_data = {
@@ -80,16 +82,19 @@ static struct at91_udc_data __initdata dk_udc_data = {
 };
 
 static struct at91_cf_data __initdata dk_cf_data = {
+       .irq_pin        = -EINVAL,
        .det_pin        = AT91_PIN_PB0,
+       .vcc_pin        = -EINVAL,
        .rst_pin        = AT91_PIN_PC5,
-       // .irq_pin     = ... not connected
-       // .vcc_pin     = ... always powered
 };
 
 #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
 static struct at91_mmc_data __initdata dk_mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 #endif
 
@@ -143,7 +148,7 @@ static struct atmel_nand_data __initdata dk_nand_data = {
        .cle            = 21,
        .det_pin        = AT91_PIN_PB1,
        .rdy_pin        = AT91_PIN_PC2,
-       // .enable_pin  = ... not there
+       .enable_pin     = -EINVAL,
        .parts          = dk_nand_partition,
        .num_parts      = ARRAY_SIZE(dk_nand_partition),
 };

diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index ed275861adef94b58ed57e2b71081bc53e9ce8a2..ef7c12a922464d3accbd06e263a2e548115906ac 100644 (file)
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -72,6 +72,8 @@ static struct macb_platform_data __initdata ek_eth_data = {
 
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata ek_udc_data = {
@@ -85,6 +87,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
        .wp_pin         = AT91_PIN_PA17,
+       .vcc_pin        = -EINVAL,
 };
 #endif
 

diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index ed3b21f7767422ece2773767e4ddcfac11d4aa5b..af0750fafa29cd5ba5dc712ad4e3348f72ee8cb8 100644 (file)
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -70,6 +70,8 @@ static struct macb_platform_data rsi_ews_eth_data __initdata = {
  */
 static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*

diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 1e1834b2b4c3c6400b84b630629baa9103d7788f..84bce587735fd408f1c34e39ee615e82f6bb92bd 100644 (file)
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -72,6 +72,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -79,7 +81,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
        .vbus_pin       = AT91_PIN_PC5,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -134,7 +136,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 21,
        .cle            = 22,
-//     .det_pin        = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PC13,
        .enable_pin     = AT91_PIN_PC14,
        .parts          = ek_nand_partition,
@@ -176,7 +178,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
        .wire4          = 1,
        .det_pin        = AT91_PIN_PC8,
        .wp_pin         = AT91_PIN_PC4,
-//     .vcc_pin        = ... not connected
+       .vcc_pin        = -EINVAL,
 };
 
 static void __init ek_board_init(void)

diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index e1b250ed0ca8a96a15c40ff4a7e428b97a78e13f..be8233bcabdcc1d56b96bf632b8a91dfd6c97a47 100644 (file)
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -75,6 +75,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -82,7 +84,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
        .vbus_pin       = AT91_PIN_PC5,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -176,7 +178,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 21,
        .cle            = 22,
-//     .det_pin        = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PC13,
        .enable_pin     = AT91_PIN_PC14,
        .parts          = ek_nand_partition,
@@ -223,9 +225,9 @@ static void __init ek_add_device_nand(void)
 static struct at91_mmc_data __initdata ek_mmc_data = {
        .slot_b         = 1,
        .wire4          = 1,
-//     .det_pin        = ... not connected
-//     .wp_pin         = ... not connected
-//     .vcc_pin        = ... not connected
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 

diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index a879b3398f38875ef097acdbb431504d6365ba7f..40895072a1a754c520608427faa5fdfe708a0fdf 100644 (file)
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -151,6 +151,8 @@ static void __init ek_add_device_dm9000(void) {}
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 
@@ -159,7 +161,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
        .vbus_pin       = AT91_PIN_PB29,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -182,7 +184,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 22,
        .cle            = 21,
-//     .det_pin        = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PC15,
        .enable_pin     = AT91_PIN_PC14,
        .parts          = ek_nand_partition,
@@ -345,6 +347,9 @@ static struct spi_board_info ek_spi_devices[] = {
  */
 static struct at91_mmc_data __initdata ek_mmc_data = {
        .wire4          = 1,
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 #endif /* CONFIG_SPI_ATMEL_* */

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 3ce0b17bd9ed2474bdf989f8d5180f3250b3e054..29f66052fe63b57d275cc40ae694b1f0199b83bf 100644 (file)
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -74,6 +74,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
        .vbus_pin       = { AT91_PIN_PA24, AT91_PIN_PA21 },
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -81,7 +82,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
        .vbus_pin       = AT91_PIN_PA25,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -151,7 +152,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
        .wire4          = 1,
        .det_pin        = AT91_PIN_PE18,
        .wp_pin         = AT91_PIN_PE19,
-//     .vcc_pin        = ... not connected
+       .vcc_pin        = -EINVAL,
 };
 
 
@@ -183,7 +184,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 21,
        .cle            = 22,
-//     .det_pin        = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PA22,
        .enable_pin     = AT91_PIN_PD15,
        .parts          = ek_nand_partition,
@@ -353,6 +354,7 @@ static void __init ek_add_device_buttons(void) {}
  * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
+       .reset_pin      = -EINVAL,
 };
 
 

diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index a67b269a2fcea53c6721f8fdbc9f00996aef9590..843d6286c6f452bc6f84dd2b2f7b5fe43b16f6a0 100644 (file)
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -86,6 +86,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -93,7 +95,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
        .vbus_pin       = AT91_PIN_PC5,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -163,6 +165,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
        .cle            = 22,
        .rdy_pin        = AT91_PIN_PC13,
        .enable_pin     = AT91_PIN_PC14,
+       .det_pin        = -EINVAL,
        .parts          = ek_nand_partition,
        .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
@@ -210,6 +213,7 @@ static struct mci_platform_data __initdata ek_mmc_data = {
        .slot[1] = {
                .bus_width      = 4,
                .detect_pin     = AT91_PIN_PC9,
+               .wp_pin         = -EINVAL,
        },
 
 };
@@ -218,6 +222,8 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
        .slot_b         = 1,    /* Only one slot so use slot B */
        .wire4          = 1,
        .det_pin        = AT91_PIN_PC9,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 #endif
 
@@ -227,6 +233,7 @@ static void __init ek_add_device_mmc(void)
        if (ek_have_2mmc()) {
                ek_mmc_data.slot[0].bus_width = 4;
                ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
+               ek_mmc_data.slot[0].wp_pin = -1;
        }
        at91_add_device_mci(0, &ek_mmc_data);
 #else

diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 061465daa1f82d2702d2ceccc260f0b195076d72..ea0d1b9c2b7bd0327326a227509f7d4f1c896263 100644 (file)
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -69,6 +69,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_hs_data = {
        .ports          = 2,
        .vbus_pin       = {AT91_PIN_PD1, AT91_PIN_PD3},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 
@@ -100,6 +101,7 @@ static struct mci_platform_data __initdata mci0_data = {
        .slot[0] = {
                .bus_width      = 4,
                .detect_pin     = AT91_PIN_PD10,
+               .wp_pin         = -EINVAL,
        },
 };
 
@@ -143,6 +145,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
        .cle            = 22,
        .rdy_pin        = AT91_PIN_PC8,
        .enable_pin     = AT91_PIN_PC14,
+       .det_pin        = -EINVAL,
        .parts          = ek_nand_partition,
        .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
@@ -330,6 +333,7 @@ static void __init ek_add_device_buttons(void) {}
  * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
+       .reset_pin      = -EINVAL,
 };
 
 

diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index c561edac25b94e7a1682b19d3721fa350573c61b..c1366d0032bf46a7bcafedaac099b1b6f6210b6e 100644 (file)
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -67,8 +67,8 @@ static struct usba_platform_data __initdata ek_usba_udc_data = {
 static struct at91_mmc_data __initdata ek_mmc_data = {
        .wire4          = 1,
        .det_pin        = AT91_PIN_PA15,
-//     .wp_pin         = ... not connected
-//     .vcc_pin        = ... not connected
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 
@@ -91,7 +91,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 21,
        .cle            = 22,
-//     .det_pin        = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PD17,
        .enable_pin     = AT91_PIN_PB6,
        .parts          = ek_nand_partition,
@@ -204,6 +204,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
  * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
+       .reset_pin      = -EINVAL,
 };
 
 

diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 73ed8c746085613c1471b5378afeae28a2c72b56..4770db08e5a6c1895b52794d02eba84b499da56c 100644 (file)
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -57,15 +57,19 @@ static void __init snapper9260_init_early(void)
 
 static struct at91_usbh_data __initdata snapper9260_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata snapper9260_udc_data = {
        .vbus_pin               = SNAPPER9260_IO_EXP_GPIO(5),
        .vbus_active_low        = 1,
        .vbus_polled            = 1,
+       .pullup_pin             = -EINVAL,
 };
 
 static struct macb_platform_data snapper9260_macb_data = {
+       .phy_irq_pin    = -EINVAL,
        .is_rmii        = 1,
 };
 
@@ -104,6 +108,8 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = {
        .parts          = snapper9260_nand_partitions,
        .num_parts      = ARRAY_SIZE(snapper9260_nand_partitions),
        .bus_width_16   = 0,
+       .enable_pin     = -EINVAL,
+       .det_pin        = -EINVAL,
 };
 
 static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {

diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index f4b9b6f2b594b4e97da712bedf39ac615e937ce8..e8d3d5b8824481097e6ba0f94068d3c1ec4530fd 100644 (file)
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -85,6 +85,7 @@ static struct atmel_nand_data __initdata nand_data = {
        .rdy_pin        = AT91_PIN_PC13,
        .enable_pin     = AT91_PIN_PC14,
        .bus_width_16   = 0,
+       .det_pin        = -EINVAL,
 };
 
 static struct sam9_smc_config __initdata nand_smc_config = {
@@ -122,12 +123,17 @@ static void __init add_device_nand(void)
 static struct mci_platform_data __initdata mmc_data = {
        .slot[0] = {
                .bus_width      = 4,
+               .detect_pin     = -1;
+               .wp_pin         = -1;
        },
 };
 #else
 static struct at91_mmc_data __initdata mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 #endif
 
@@ -137,6 +143,8 @@ static struct at91_mmc_data __initdata mmc_data = {
  */
 static struct at91_usbh_data __initdata usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 
@@ -145,12 +153,12 @@ static struct at91_usbh_data __initdata usbh_data = {
  */
 static struct at91_udc_data __initdata portuxg20_udc_data = {
        .vbus_pin       = AT91_PIN_PC7,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
        .vbus_pin       = AT91_PIN_PA22,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 

diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index f9b2f86ae89268bb6594a1a6f88ce52ea16cf989..f247a38827b9d051ee2948c79eead5e832f6b7ff 100644 (file)
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -66,6 +66,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -73,7 +75,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
        .vbus_pin       = AT91_PIN_PB11,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 static void __init ek_add_device_udc(void)
@@ -193,7 +195,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 21,
        .cle            = 22,
-//     .det_pin        = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PA22,
        .enable_pin     = AT91_PIN_PD15,
        .parts          = ek_nand_partition,

diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 2c40a21b2794c1b19d4e5a112ee5c8838403e9a2..bbd553e1cd93d024cc4b8c5931f989c3a5becbfa 100644 (file)
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -120,6 +120,8 @@ static struct macb_platform_data __initdata yl9200_eth_data = {
  */
 static struct at91_usbh_data __initdata yl9200_usbh_data = {
        .ports                  = 1,    /* PQFP version of AT91RM9200 */
+       .vbus_pin               = {-EINVAL, -EINVAL},
+       .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -137,8 +139,9 @@ static struct at91_udc_data __initdata yl9200_udc_data = {
  */
 static struct at91_mmc_data __initdata yl9200_mmc_data = {
        .det_pin        = AT91_PIN_PB9,
-       // .wp_pin      = ... not connected
        .wire4          = 1,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 /*
@@ -175,7 +178,7 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = {
 static struct atmel_nand_data __initdata yl9200_nand_data = {
        .ale            = 6,
        .cle            = 7,
-       // .det_pin     = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PC14,        /* R/!B (Sheet10) */
        .enable_pin     = AT91_PIN_PC15,        /* !CE  (Sheet10) */
        .parts          = yl9200_nand_partition,

diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index e209a2992245683d4812c99b8c2250a589e1deb5..d0b377b21bd7d76da84a19db3c05c6d7304e62c0 100644 (file)
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -44,10 +44,10 @@
 
  /* USB Device */
 struct at91_udc_data {
-       u8      vbus_pin;               /* high == host powering us */
+       int     vbus_pin;               /* high == host powering us */
        u8      vbus_active_low;        /* vbus polarity */
        u8      vbus_polled;            /* Use polling, not interrupt */
-       u8      pullup_pin;             /* active == D+ pulled up */
+       int     pullup_pin;             /* active == D+ pulled up */
        u8      pullup_active_low;      /* true == pullup_pin is active low */
 };
 extern void __init at91_add_device_udc(struct at91_udc_data *data);
@@ -57,10 +57,10 @@ extern void __init at91_add_device_usba(struct usba_platform_data *data);
 
  /* Compact Flash */
 struct at91_cf_data {
-       u8      irq_pin;                /* I/O IRQ */
-       u8      det_pin;                /* Card detect */
-       u8      vcc_pin;                /* power switching */
-       u8      rst_pin;                /* card reset */
+       int     irq_pin;                /* I/O IRQ */
+       int     det_pin;                /* Card detect */
+       int     vcc_pin;                /* power switching */
+       int     rst_pin;                /* card reset */
        u8      chipselect;             /* EBI Chip Select number */
        u8      flags;
 #define AT91_CF_TRUE_IDE       0x01
@@ -71,11 +71,11 @@ extern void __init at91_add_device_cf(struct at91_cf_data *data);
  /* MMC / SD */
   /* at91_mci platform config */
 struct at91_mmc_data {
-       u8              det_pin;        /* card detect IRQ */
+       int             det_pin;        /* card detect IRQ */
        unsigned        slot_b:1;       /* uses Slot B */
        unsigned        wire4:1;        /* (SD) supports DAT0..DAT3 */
-       u8              wp_pin;         /* (SD) writeprotect detect */
-       u8              vcc_pin;        /* power switching (high == on) */
+       int             wp_pin;         /* (SD) writeprotect detect */
+       int             vcc_pin;        /* power switching (high == on) */
 };
 extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
 
@@ -87,10 +87,10 @@ extern void __init at91_add_device_eth(struct macb_platform_data *data);
  /* USB Host */
 struct at91_usbh_data {
        u8              ports;          /* number of ports on root hub */
-       u8              vbus_pin[2];    /* port power-control pin */
+       int             vbus_pin[2];    /* port power-control pin */
        u8              vbus_pin_inverted;
        u8              overcurrent_supported;
-       u8              overcurrent_pin[2];
+       int             overcurrent_pin[2];
        u8              overcurrent_status[2];
        u8              overcurrent_changed[2];
 };
@@ -100,9 +100,9 @@ extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
 
  /* NAND / SmartMedia */
 struct atmel_nand_data {
-       u8              enable_pin;     /* chip enable */
-       u8              det_pin;        /* card detect */
-       u8              rdy_pin;        /* ready/busy */
+       int             enable_pin;     /* chip enable */
+       int             det_pin;        /* card detect */
+       int             rdy_pin;        /* ready/busy */
        u8              rdy_pin_active_low;     /* rdy_pin value is inverted */
        u8              ale;            /* address line number connected to ALE */
        u8              cle;            /* address line number connected to CLE */

diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h
index e7c748fb60535b2e6f02c1762dcb1f1aeec264d9..b081c7245ec8a94cd7ed3664c1f91a0e15814897 100644 (file)
--- a/include/linux/platform_data/macb.h
+++ b/include/linux/platform_data/macb.h
@@ -10,7 +10,7 @@
 
 struct macb_platform_data {
        u32             phy_mask;
-       u8              phy_irq_pin;    /* PHY IRQ */
+       int             phy_irq_pin;    /* PHY IRQ */
        u8              is_rmii;        /* using RMII interface? */
 };