LIST_85xx=" \
ATUM8548 \
MPC8536DS \
+ MPC8536DS_NAND \
+ MPC8536DS_SDCARD \
+ MPC8536DS_SPIFLASH \
MPC8540ADS \
MPC8540EVAL \
MPC8541CDS \
ifeq ($(CONFIG_ONENAND_U_BOOT),y)
ONENAND_IPL = onenand_ipl
U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
+ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
endif
__OBJS := $(subst $(obj),,$(OBJS))
$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin
- cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
- cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin
+ cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
$(VERSION_FILE):
@( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
sbc8349_config \
sbc8349_PCI_33_config \
sbc8349_PCI_66_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _PCI_,$@)" ] ; then \
- $(XECHO) -n "... PCI HOST at " ; \
- echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
- fi ; \
- if [ "$(findstring _33_,$@)" ] ; then \
- $(XECHO) -n "33MHz... " ; \
- echo "#define PCI_33M" >>$(obj)include/config.h ; \
- fi ; \
- if [ "$(findstring _66_,$@)" ] ; then \
- $(XECHO) -n "66MHz... " ; \
- echo "#define PCI_66M" >>$(obj)include/config.h ; \
- fi ;
- @$(MKCONFIG) -a sbc8349 ppc mpc83xx sbc8349
+ @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349
SIMPC8313_LP_config \
SIMPC8313_SP_config: unconfig
ATUM8548_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
+MPC8536DS_NAND_config \
+MPC8536DS_SDCARD_config \
+MPC8536DS_SPIFLASH_config \
MPC8536DS_36BIT_config \
MPC8536DS_config: unconfig
@$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale
#########################################################################
apollon_config : unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)onenand_ipl/board/apollon
@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
$(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
- @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
+ @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
+ @rm -f $(ONENAND_BIN)
@rm -f $(obj)onenand_ipl/u-boot.lds
@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
@find $(OBJTREE) -type f \
mfsdr(SDR0_ULTRA1, reg);
mtsdr(SDR0_ULTRA1, reg | SDR_ULTRA1_LEDNENABLE);
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000010);
- mtdcr(uicpr, 0xFE7FFFF0); /* set int polarities */
- mtdcr(uictr, 0x00000010); /* set int trigger levels */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000010);
+ mtdcr(UIC0PR, 0xFE7FFFF0); /* set int polarities */
+ mtdcr(UIC0TR, 0x00000010); /* set int trigger levels */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
return 0;
}
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
- mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
-
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000009); /* ATI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
/*--------------------------------------------------------------------
* Setup the GPIO pins
int board_early_init_f(void)
{
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000010);
- mtdcr(uicpr, 0xFFFF7FF0); /* set int polarities */
- mtdcr(uictr, 0x00000010); /* set int trigger levels */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000010);
+ mtdcr(UIC0PR, 0xFFFF7FF0); /* set int polarities */
+ mtdcr(UIC0TR, 0x00000010); /* set int trigger levels */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* Configure CPC0_PCI to enable PerWE as output
/*
* Setup the interrupt controller polarities, triggers, etc.
*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
-
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
-
- mtdcr(uic2sr, 0xffffffff); /* clear all */
- mtdcr(uic2er, 0x00000000); /* disable all */
- mtdcr(uic2cr, 0x00000000); /* all non-critical */
- mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic2sr, 0xffffffff); /* clear all */
-
- mtdcr(uic3sr, 0xffffffff); /* clear all */
- mtdcr(uic3er, 0x00000000); /* disable all */
- mtdcr(uic3cr, 0x00000000); /* all non-critical */
- mtdcr(uic3pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic3tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic3vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic3sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
+ mtdcr(UIC2ER, 0x00000000); /* disable all */
+ mtdcr(UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC3SR, 0xffffffff); /* clear all */
+ mtdcr(UIC3ER, 0x00000000); /* disable all */
+ mtdcr(UIC3CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC3TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC3SR, 0xffffffff); /* clear all */
#if !defined(CONFIG_ARCHES)
/* SDR Setting - enable NDFC */
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
- mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
return 0;
}
/*--------------------------------------------------------------------
* Setup some default
*------------------------------------------------------------------*/
- mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
- mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
- mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
- mtsdram(mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
- mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+ mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */
+ mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */
+ mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
/*--------------------------------------------------------------------
* Setup for board-specific specific mem
/*
* Following for CAS Latency = 2.5 @ 133 MHz PLB
*/
- mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
- mtsdram(mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
+ mtsdram(SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram(SDRAM0_TR0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
/* RA=10 RD=3 */
- mtsdram(mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
- mtsdram(mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
- mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
+ mtsdram(SDRAM0_TR1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
+ mtsdram(SDRAM0_RTR, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
+ mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */
udelay(400); /* Delay 200 usecs (min) */
/*--------------------------------------------------------------------
* Enable the controller, then wait for DCEN to complete
*------------------------------------------------------------------*/
- mtsdram(mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
+ mtsdram(SDRAM0_CFG0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
for (;;) {
- mfsdram(mem_mcsts, reg);
+ mfsdram(SDRAM0_MCSTS, reg);
if (reg & 0x80000000)
break;
}
* Set critical interrupt values. Set interrupt polarities. Set interrupt
* trigger levels. Make bit 0 High priority. Clear all interrupts again.
*------------------------------------------------------------------------*/
- mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic3er, 0x00000000); /* disable all interrupts */
- mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical interrupts: */
- mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities*/
- mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */
- mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic3sr, 0x00000000); /* clear all interrupts*/
- mtdcr (uic3sr, 0xffffffff); /* clear all interrupts*/
-
-
- mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic2er, 0x00000000); /* disable all interrupts*/
- mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts*/
- mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities*/
- mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */
- mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic2sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */
-
- mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts*/
- mtdcr (uic1er, 0x00000000); /* disable all interrupts*/
- mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts*/
- mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */
- mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels*/
- mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic1sr, 0x00000000); /* clear all interrupts*/
- mtdcr (uic1sr, 0xffffffff); /* clear all interrupts*/
-
- mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted cascade to be checked */
- mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical interrupts*/
- mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities*/
- mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */
- mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic0sr, 0x00000000); /* clear all interrupts*/
- mtdcr (uic0sr, 0xffffffff); /* clear all interrupts*/
+ mtdcr (UIC3SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC3ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC3CR, 0x00000000); /* Set Critical / Non Critical interrupts: */
+ mtdcr (UIC3PR, 0xffffffff); /* Set Interrupt Polarities*/
+ mtdcr (UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC3VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC3SR, 0x00000000); /* clear all interrupts*/
+ mtdcr (UIC3SR, 0xffffffff); /* clear all interrupts*/
+
+
+ mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC2ER, 0x00000000); /* disable all interrupts*/
+ mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts*/
+ mtdcr (UIC2PR, 0xebebebff); /* Set Interrupt Polarities*/
+ mtdcr (UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */
+
+ mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts*/
+ mtdcr (UIC1ER, 0x00000000); /* disable all interrupts*/
+ mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts*/
+ mtdcr (UIC1PR, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr (UIC1TR, 0x001f8040); /* Set Interrupt Trigger Levels*/
+ mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC1SR, 0x00000000); /* clear all interrupts*/
+ mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts*/
+
+ mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC0ER, 0x00000000); /* disable all interrupts excepted cascade to be checked */
+ mtdcr (UIC0CR, 0x00104001); /* Set Critical / Non Critical interrupts*/
+ mtdcr (UIC0PR, 0xffffffff); /* Set Interrupt Polarities*/
+ mtdcr (UIC0TR, 0x010f0004); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC0SR, 0x00000000); /* clear all interrupts*/
+ mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts*/
mfsdr(SDR0_MFR, mfr);
mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */
| interrupts again.
+-------------------------------------------------------------------*/
- mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic2er, 0x00000000); /* disable all interrupts */
- mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts */
- mtdcr (uic2pr, 0xf7ffffff); /* Set Interrupt Polarities */
- mtdcr (uic2tr, 0x01e1fff8); /* Set Interrupt Trigger Levels */
- mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic2sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */
-
- mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic1er, 0x00000000); /* disable all interrupts */
- mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts */
- mtdcr (uic1pr, 0xfffac785); /* Set Interrupt Polarities */
- mtdcr (uic1tr, 0x001d0040); /* Set Interrupt Trigger Levels */
- mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic1sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */
-
- mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic0er, 0x0000000a); /* Disable all interrupts */
+ mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC2ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC2PR, 0xf7ffffff); /* Set Interrupt Polarities */
+ mtdcr (UIC2TR, 0x01e1fff8); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */
+
+ mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC1ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC1PR, 0xfffac785); /* Set Interrupt Polarities */
+ mtdcr (UIC1TR, 0x001d0040); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC1SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts */
+
+ mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC0ER, 0x0000000a); /* Disable all interrupts */
/* Except cascade UIC0 and UIC1 */
- mtdcr (uic0cr, 0x00000000); /* Set Critical / Non Critical interrupts */
- mtdcr (uic0pr, 0xffbfefef); /* Set Interrupt Polarities */
- mtdcr (uic0tr, 0x00007000); /* Set Interrupt Trigger Levels */
- mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic0sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC0CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC0PR, 0xffbfefef); /* Set Interrupt Polarities */
+ mtdcr (UIC0TR, 0x00007000); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC0SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts */
/*
* Note: Some cores are still in reset when the chip starts, so
mtebc( PB2AP, 0x03800000 );
mtebc( PB2CR, 0xff838000 ); /* ebc0_b2cr, 2MB at 0xff800000 CS2 */
- mtdcr( uic1sr, 0xffffffff ); /* Clear all interrupts */
- mtdcr( uic1er, 0x00000000 ); /* disable all interrupts */
- mtdcr( uic1cr, 0x00000000 ); /* Set Critical / Non Critical interrupts */
- mtdcr( uic1pr, 0x7fff83ff ); /* Set Interrupt Polarities */
- mtdcr( uic1tr, 0x001f8000 ); /* Set Interrupt Trigger Levels */
- mtdcr( uic1vr, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
- mtdcr( uic1sr, 0x00000000 ); /* clear all interrupts */
- mtdcr( uic1sr, 0xffffffff );
-
- mtdcr( uic0sr, 0xffffffff ); /* Clear all interrupts */
- mtdcr( uic0er, 0x00000000 ); /* disable all interrupts excepted cascade */
- mtdcr( uic0cr, 0x00000001 ); /* Set Critical / Non Critical interrupts */
- mtdcr( uic0pr, 0xffffffff ); /* Set Interrupt Polarities */
- mtdcr( uic0tr, 0x01000004 ); /* Set Interrupt Trigger Levels */
- mtdcr( uic0vr, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
- mtdcr( uic0sr, 0x00000000 ); /* clear all interrupts */
- mtdcr( uic0sr, 0xffffffff );
+ mtdcr( UIC1SR, 0xffffffff ); /* Clear all interrupts */
+ mtdcr( UIC1ER, 0x00000000 ); /* disable all interrupts */
+ mtdcr( UIC1CR, 0x00000000 ); /* Set Critical / Non Critical interrupts */
+ mtdcr( UIC1PR, 0x7fff83ff ); /* Set Interrupt Polarities */
+ mtdcr( UIC1TR, 0x001f8000 ); /* Set Interrupt Trigger Levels */
+ mtdcr( UIC1VR, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr( UIC1SR, 0x00000000 ); /* clear all interrupts */
+ mtdcr( UIC1SR, 0xffffffff );
+
+ mtdcr( UIC0SR, 0xffffffff ); /* Clear all interrupts */
+ mtdcr( UIC0ER, 0x00000000 ); /* disable all interrupts excepted cascade */
+ mtdcr( UIC0CR, 0x00000001 ); /* Set Critical / Non Critical interrupts */
+ mtdcr( UIC0PR, 0xffffffff ); /* Set Interrupt Polarities */
+ mtdcr( UIC0TR, 0x01000004 ); /* Set Interrupt Trigger Levels */
+ mtdcr( UIC0VR, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr( UIC0SR, 0x00000000 ); /* clear all interrupts */
+ mtdcr( UIC0SR, 0xffffffff );
mfsdr(SDR0_MFR, mfr);
mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */
| interrupts again.
+-------------------------------------------------------------------*/
- mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic2er, 0x00000000); /* disable all interrupts */
- mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts */
- mtdcr (uic2pr, 0xf7ffffff); /* Set Interrupt Polarities */
- mtdcr (uic2tr, 0x01e1fff8); /* Set Interrupt Trigger Levels */
- mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic2sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC2ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC2PR, 0xf7ffffff); /* Set Interrupt Polarities */
+ mtdcr (UIC2TR, 0x01e1fff8); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */
- mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic1er, 0x00000000); /* disable all interrupts */
- mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts */
- mtdcr (uic1pr, 0xfffac785); /* Set Interrupt Polarities */
- mtdcr (uic1tr, 0x001d0040); /* Set Interrupt Trigger Levels */
- mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic1sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC1ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC1PR, 0xfffac785); /* Set Interrupt Polarities */
+ mtdcr (UIC1TR, 0x001d0040); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC1SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts */
- mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic0er, 0x0000000a); /* Disable all interrupts */
+ mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC0ER, 0x0000000a); /* Disable all interrupts */
/* Except cascade UIC0 and UIC1 */
- mtdcr (uic0cr, 0x00000000); /* Set Critical / Non Critical interrupts */
- mtdcr (uic0pr, 0xffbfefef); /* Set Interrupt Polarities */
- mtdcr (uic0tr, 0x00007000); /* Set Interrupt Trigger Levels */
- mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
- mtdcr (uic0sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC0CR, 0x00000000); /* Set Critical / Non Critical interrupts */
+ mtdcr (UIC0PR, 0xffbfefef); /* Set Interrupt Polarities */
+ mtdcr (UIC0TR, 0x00007000); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (UIC0SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts */
/*
* Note: Some cores are still in reset when the chip starts, so
* UIC2 UIC1
* UIC3 UIC2
*/
- mtdcr (uic1sr, 0xffffffff); /* clear all */
- mtdcr (uic1er, 0x00000000); /* disable all */
- mtdcr (uic1cr, 0x00000009); /* SMI & UIC1 crit are critical */
- mtdcr (uic1pr, 0xfffffe13); /* per ref-board manual */
- mtdcr (uic1tr, 0x01c00008); /* per ref-board manual */
- mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic1sr, 0xffffffff); /* clear all */
-
- mtdcr (uic2sr, 0xffffffff); /* clear all */
- mtdcr (uic2er, 0x00000000); /* disable all */
- mtdcr (uic2cr, 0x00000000); /* all non-critical */
- mtdcr (uic2pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr (uic2tr, 0x00ffc000); /* per ref-board manual */
- mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic2sr, 0xffffffff); /* clear all */
-
- mtdcr (uic3sr, 0xffffffff); /* clear all */
- mtdcr (uic3er, 0x00000000); /* disable all */
- mtdcr (uic3cr, 0x00000000); /* all non-critical */
- mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */
- mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */
- mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic3sr, 0xffffffff); /* clear all */
-
- mtdcr (uic0sr, 0xfc000000); /* clear all */
- mtdcr (uic0er, 0x00000000); /* disable all */
- mtdcr (uic0cr, 0x00000000); /* all non-critical */
- mtdcr (uic0pr, 0xfc000000); /* */
- mtdcr (uic0tr, 0x00000000); /* */
- mtdcr (uic0vr, 0x00000001); /* */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+ mtdcr (UIC1ER, 0x00000000); /* disable all */
+ mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr (UIC1PR, 0xfffffe13); /* per ref-board manual */
+ mtdcr (UIC1TR, 0x01c00008); /* per ref-board manual */
+ mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+ mtdcr (UIC2ER, 0x00000000); /* disable all */
+ mtdcr (UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+ mtdcr (UIC3ER, 0x00000000); /* disable all */
+ mtdcr (UIC3CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */
+ mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */
+ mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC0SR, 0xfc000000); /* clear all */
+ mtdcr (UIC0ER, 0x00000000); /* disable all */
+ mtdcr (UIC0CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC0PR, 0xfc000000); /* */
+ mtdcr (UIC0TR, 0x00000000); /* */
+ mtdcr (UIC0VR, 0x00000001); /* */
mfsdr (SDR0_MFR, mfr);
mfr &= ~SDR0_MFR_ECS_MASK;
/* mtsdr(SDR0_MFR, mfr); */
/*--------------------------------------------------------------------
* Setup some default
*------------------------------------------------------------------*/
- mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */
- mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
- mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
- mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
- mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+ mtsdram (SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */
+ mtsdram (SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram (SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram (SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */
+ mtsdram (SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
/*--------------------------------------------------------------------
* Setup for board-specific specific mem
/*
* Following for CAS Latency = 2.5 @ 133 MHz PLB
*/
- mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
- mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
+ mtsdram (SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram (SDRAM0_TR0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
/* RA=10 RD=3 */
- mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
- mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
- mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
+ mtsdram (SDRAM0_TR1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
+ mtsdram (SDRAM0_RTR, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
+ mtsdram (SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */
udelay (400); /* Delay 200 usecs (min) */
/*--------------------------------------------------------------------
* Enable the controller, then wait for DCEN to complete
*------------------------------------------------------------------*/
- mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
+ mtsdram (SDRAM0_CFG0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
for (;;) {
- mfsdram (mem_mcsts, reg);
+ mfsdram (SDRAM0_MCSTS, reg);
if (reg & 0x80000000)
break;
}
* interrupt trigger levels. Make bit 0 High priority. Clear all
* interrupts again.
*/
- mtdcr(uic3sr, 0xffffffff); /* Clear all interrupts */
- mtdcr(uic3er, 0x00000000); /* disable all interrupts */
- mtdcr(uic3cr, 0x00000000); /* Set Critical / Non Critical
+ mtdcr(UIC3SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr(UIC3ER, 0x00000000); /* disable all interrupts */
+ mtdcr(UIC3CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
- mtdcr(uic3pr, 0xffffffff); /* Set Interrupt Polarities */
- mtdcr(uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */
- mtdcr(uic3vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic3sr, 0xffffffff); /* clear all interrupts */
-
- mtdcr(uic2sr, 0xffffffff); /* Clear all interrupts */
- mtdcr(uic2er, 0x00000000); /* disable all interrupts */
- mtdcr(uic2cr, 0x00000000); /* Set Critical / Non Critical
+ mtdcr(UIC3PR, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr(UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */
+ mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC3SR, 0xffffffff); /* clear all interrupts */
+
+ mtdcr(UIC2SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr(UIC2ER, 0x00000000); /* disable all interrupts */
+ mtdcr(UIC2CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
- mtdcr(uic2pr, 0xebebebff); /* Set Interrupt Polarities */
- mtdcr(uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */
- mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic2sr, 0xffffffff); /* clear all interrupts */
-
- mtdcr(uic1sr, 0xffffffff); /* Clear all interrupts */
- mtdcr(uic1er, 0x00000000); /* disable all interrupts */
- mtdcr(uic1cr, 0x00000000); /* Set Critical / Non Critical
+ mtdcr(UIC2PR, 0xebebebff); /* Set Interrupt Polarities */
+ mtdcr(UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */
+ mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all interrupts */
+
+ mtdcr(UIC1SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr(UIC1ER, 0x00000000); /* disable all interrupts */
+ mtdcr(UIC1CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
- mtdcr(uic1pr, 0xffffffff); /* Set Interrupt Polarities */
- mtdcr(uic1tr, 0x001fc0ff); /* Set Interrupt Trigger Levels */
- mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all interrupts */
+ mtdcr(UIC1PR, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr(UIC1TR, 0x001fc0ff); /* Set Interrupt Trigger Levels */
+ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all interrupts */
- mtdcr(uic0sr, 0xffffffff); /* Clear all interrupts */
- mtdcr(uic0er, 0x00000000); /* disable all interrupts excepted
+ mtdcr(UIC0SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr(UIC0ER, 0x00000000); /* disable all interrupts excepted
* cascade to be checked */
- mtdcr(uic0cr, 0x00104001); /* Set Critical / Non Critical
+ mtdcr(UIC0CR, 0x00104001); /* Set Critical / Non Critical
* interrupts */
- mtdcr(uic0pr, 0xffffffff); /* Set Interrupt Polarities */
- mtdcr(uic0tr, 0x000f003c); /* Set Interrupt Trigger Levels */
- mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all interrupts */
+ mtdcr(UIC0PR, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr(UIC0TR, 0x000f003c); /* Set Interrupt Trigger Levels */
+ mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all interrupts */
}
/*
* Setup the interrupt controller polarities, triggers, etc.
*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */
- mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
-
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
-
- mtdcr(uic2sr, 0xffffffff); /* clear all */
- mtdcr(uic2er, 0x00000000); /* disable all */
- mtdcr(uic2cr, 0x00000000); /* all non-critical */
- mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xfffff7ff); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
+ mtdcr(UIC2ER, 0x00000000); /* disable all */
+ mtdcr(UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
/* 50MHz tmrclk */
out_8((u8 *) CONFIG_SYS_BCSR_BASE + 0x04, 0x00);
{
lcd_init();
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000);
- mtdcr(uicpr, 0xFFFF7F00); /* set int polarities */
- mtdcr(uictr, 0x00000000); /* set int trigger levels */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000);
+ mtdcr(UIC0PR, 0xFFFF7F00); /* set int polarities */
+ mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP); /* memory bank 3 (CPLD_LCM) initialization */
mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
* UIC2 UIC1
* UIC3 UIC2
*/
- mtdcr (uic1sr, 0xffffffff); /* clear all */
- mtdcr (uic1er, 0x00000000); /* disable all */
- mtdcr (uic1cr, 0x00000009); /* SMI & UIC1 crit are critical */
- mtdcr (uic1pr, 0xfffffe13); /* per ref-board manual */
- mtdcr (uic1tr, 0x01c00008); /* per ref-board manual */
- mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic1sr, 0xffffffff); /* clear all */
-
- mtdcr (uic2sr, 0xffffffff); /* clear all */
- mtdcr (uic2er, 0x00000000); /* disable all */
- mtdcr (uic2cr, 0x00000000); /* all non-critical */
- mtdcr (uic2pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr (uic2tr, 0x00ffc000); /* per ref-board manual */
- mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic2sr, 0xffffffff); /* clear all */
-
- mtdcr (uic3sr, 0xffffffff); /* clear all */
- mtdcr (uic3er, 0x00000000); /* disable all */
- mtdcr (uic3cr, 0x00000000); /* all non-critical */
- mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */
- mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */
- mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic3sr, 0xffffffff); /* clear all */
-
- mtdcr (uic0sr, 0xfc000000); /* clear all */
- mtdcr (uic0er, 0x00000000); /* disable all */
- mtdcr (uic0cr, 0x00000000); /* all non-critical */
- mtdcr (uic0pr, 0xfc000000); /* */
- mtdcr (uic0tr, 0x00000000); /* */
- mtdcr (uic0vr, 0x00000001); /* */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+ mtdcr (UIC1ER, 0x00000000); /* disable all */
+ mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr (UIC1PR, 0xfffffe13); /* per ref-board manual */
+ mtdcr (UIC1TR, 0x01c00008); /* per ref-board manual */
+ mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+ mtdcr (UIC2ER, 0x00000000); /* disable all */
+ mtdcr (UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+ mtdcr (UIC3ER, 0x00000000); /* disable all */
+ mtdcr (UIC3CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */
+ mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */
+ mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC0SR, 0xfc000000); /* clear all */
+ mtdcr (UIC0ER, 0x00000000); /* disable all */
+ mtdcr (UIC0CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC0PR, 0xfc000000); /* */
+ mtdcr (UIC0TR, 0x00000000); /* */
+ mtdcr (UIC0VR, 0x00000001); /* */
/* Enable two GPIO 10~11 and TraceA signal */
mfsdr(SDR0_PFC0,reg);
|
+-------------------------------------------------------------------------*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */
- mtdcr(uicpr, 0xFFFFFFE0); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000020); /* set all but FPGA SMI to be non-critical */
+ mtdcr(UIC0PR, 0xFFFFFFE0); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/* set UART1 control to select CTS/RTS */
#define FPGA_BRDC 0xF0300004
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
- mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
-
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000009); /* ATI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
/*--------------------------------------------------------------------
* Setup other serial configuration
/* go through all possible SDRAM0_TR1[RDCT] values */
for (i=0; i<=0x1ff; i++) {
/* set the current value for TR1 */
- mtsdram(mem_tr1, (0x80800800 | i));
+ mtsdram(SDRAM0_TR1, (0x80800800 | i));
/* write values */
for (j=0; j<NUM_TRIES; j++) {
/*--------------------------------------------------------------------
* Setup some default
*------------------------------------------------------------------*/
- mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
- mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
- mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
- mtsdram(mem_clktr, 0x40000000); /* ?? */
- mtsdram(mem_wddctr, 0x40000000); /* ?? */
+ mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */
+ mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(SDRAM0_CLKTR, 0x40000000); /* ?? */
+ mtsdram(SDRAM0_WDDCTR, 0x40000000); /* ?? */
/*clear this first, if the DDR is enabled by a debugger
then you can not make changes. */
- mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */
+ mtsdram(SDRAM0_CFG0, 0x00000000); /* Disable EEC */
/*--------------------------------------------------------------------
* Setup for board-specific specific mem
/*
* Following for CAS Latency = 2.5 @ 133 MHz PLB
*/
- mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
- mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */
+ mtsdram(SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram(SDRAM0_B1CR, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */
- mtsdram(mem_tr0, 0x410a4012); /* ?? */
- mtsdram(mem_rtr, 0x04080000); /* ?? */
- mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
- mtsdram(mem_cfg0, 0x30000000); /* Disable EEC */
+ mtsdram(SDRAM0_TR0, 0x410a4012); /* ?? */
+ mtsdram(SDRAM0_RTR, 0x04080000); /* ?? */
+ mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */
+ mtsdram(SDRAM0_CFG0, 0x30000000); /* Disable EEC */
udelay(400); /* Delay 200 usecs (min) */
/*--------------------------------------------------------------------
* Enable the controller, then wait for DCEN to complete
*------------------------------------------------------------------*/
- mtsdram(mem_cfg0, 0x80000000); /* Enable */
+ mtsdram(SDRAM0_CFG0, 0x80000000); /* Enable */
for (;;) {
- mfsdram(mem_mcsts, reg);
+ mfsdram(SDRAM0_MCSTS, reg);
if (reg & 0x80000000)
break;
}
sdram_tr1_set(0x00000000, &tr1_bank1);
sdram_tr1_set(0x08000000, &tr1_bank2);
- mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800));
+ mtsdram(SDRAM0_TR1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800));
return CONFIG_SYS_SDRAM_BANKS * (CONFIG_SYS_KBYTES_SDRAM * 1024); /* return bytes */
}
| interrupt trigger levels. Make bit 0 High priority. Clear all
| interrupts again.
+-------------------------------------------------------------------*/
- mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic3er, 0x00000000); /* disable all interrupts */
- mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical
+ mtdcr (UIC3SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC3ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC3CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
- mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities */
- mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */
- mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest
+ mtdcr (UIC3PR, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr (UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC3VR, 0x00000001); /* Set Vect base=0,INT31 Highest
* priority */
- mtdcr (uic3sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic3sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC3SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC3SR, 0xffffffff); /* clear all interrupts */
- mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic2er, 0x00000000); /* disable all interrupts */
- mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical
+ mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC2ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
- mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities */
- mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */
- mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest
+ mtdcr (UIC2PR, 0xebebebff); /* Set Interrupt Polarities */
+ mtdcr (UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest
* priority */
- mtdcr (uic2sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */
- mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic1er, 0x00000000); /* disable all interrupts */
- mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical
+ mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC1ER, 0x00000000); /* disable all interrupts */
+ mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
- mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */
- mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels */
- mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest
+ mtdcr (UIC1PR, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr (UIC1TR, 0x001f8040); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest
* priority */
- mtdcr (uic1sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC1SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts */
- mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */
- mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted
+ mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */
+ mtdcr (UIC0ER, 0x00000000); /* disable all interrupts excepted
* cascade to be checked */
- mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical
+ mtdcr (UIC0CR, 0x00104001); /* Set Critical / Non Critical
* interrupts */
- mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities */
- mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */
- mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest
+ mtdcr (UIC0PR, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr (UIC0TR, 0x010f0004); /* Set Interrupt Trigger Levels */
+ mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest
* priority */
- mtdcr (uic0sr, 0x00000000); /* clear all interrupts */
- mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */
+ mtdcr (UIC0SR, 0x00000000); /* clear all interrupts */
+ mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts */
mfsdr(SDR0_MFR, mfr);
mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */
{
/* Running from ROM: global data is still READONLY */
init_sdram ();
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */
- mtdcr (uicpr, 0xFFFFFFE0); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000020); /* set all but FPGA SMI to be non-critical */
+ mtdcr (UIC0PR, 0xFFFFFFE0); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
return 0;
}
unsigned long tmp;
/* write SDRAM bank 0 register */
- mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
mtdcr (SDRAM0_CFGDATA, 0x00062001);
/* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR. */
/* divisor = ((mfdcr(strap)>> 28) & 0x3); */
/* write SDRAM timing for 100MHz. */
- mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_TR);
mtdcr (SDRAM0_CFGDATA, 0x0086400D);
/* write SDRAM refresh interval register */
- mtdcr (SDRAM0_CFGADDR, mem_rtr);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
mtdcr (SDRAM0_CFGDATA, 0x05F00000);
udelay (200);
/* sdram controller.*/
- mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
mtdcr (SDRAM0_CFGDATA, 0x90800000);
udelay (200);
/* initially, disable ECC on all banks */
udelay (200);
- mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG);
tmp = mfdcr (SDRAM0_CFGDATA);
tmp &= 0xff0fffff;
- mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG);
mtdcr (SDRAM0_CFGDATA, tmp);
return;
}
printf ("Enable ECC..");
- mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x90800000;
- mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
mtdcr (SDRAM0_CFGDATA, tmp);
udelay (600);
for (p = (unsigned long) 0; ((unsigned long) p < L1_MEMSIZE); *p++ = 0L)
;
udelay (400);
- mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG);
tmp = mfdcr (SDRAM0_CFGDATA);
tmp |= 0x00800000;
mtdcr (SDRAM0_CFGDATA, tmp);
|
+-------------------------------------------------------------------------*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr (uicpr, 0xFFFFFF83); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr (UIC0PR, 0xFFFFFF83); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtebc (EBC0_CFG, 0xa8400000); /* EBC always driven */
tot_size = 0;
- mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
tmp = mfdcr (SDRAM0_CFGDATA);
if (tmp & 0x00000001) {
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
tot_size += bank_size;
}
- mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
tmp = mfdcr (SDRAM0_CFGDATA);
if (tmp & 0x00000001) {
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
tot_size += bank_size;
}
- mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
tmp = mfdcr (SDRAM0_CFGDATA);
if (tmp & 0x00000001) {
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
tot_size += bank_size;
}
- mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
tmp = mfdcr (SDRAM0_CFGDATA);
if (tmp & 0x00000001) {
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
* Disable memory controller to allow
* values to be changed.
*/
- WDCR_SDRAM(mem_mcopt1, 0x00000000)
+ WDCR_SDRAM(SDRAM0_CFG, 0x00000000)
/*
* Configure Memory Banks
*/
- WDCR_SDRAM(mem_mb0cf, 0x00084001)
- WDCR_SDRAM(mem_mb1cf, 0x00000000)
- WDCR_SDRAM(mem_mb2cf, 0x00000000)
- WDCR_SDRAM(mem_mb3cf, 0x00000000)
+ WDCR_SDRAM(SDRAM0_B0CR, 0x00084001)
+ WDCR_SDRAM(SDRAM0_B1CR, 0x00000000)
+ WDCR_SDRAM(SDRAM0_B2CR, 0x00000000)
+ WDCR_SDRAM(SDRAM0_B3CR, 0x00000000)
/*
* Set up SDTR1 (SDRAM Timing Register)
*/
- WDCR_SDRAM(mem_sdtr1, 0x00854009)
+ WDCR_SDRAM(SDRAM0_TR, 0x00854009)
/*
* Set RTR (Refresh Timing Register)
*/
- WDCR_SDRAM(mem_rtr, 0x10000000)
- /* WDCR_SDRAM(mem_rtr, 0x05f00000) */
+ WDCR_SDRAM(SDRAM0_RTR, 0x10000000)
+ /* WDCR_SDRAM(SDRAM0_RTR, 0x05f00000) */
/********************************************************************
* Delay to ensure 200usec have elapsed since reset. Assume worst
/********************************************************************
* Set memory controller options reg, MCOPT1.
*******************************************************************/
- WDCR_SDRAM(mem_mcopt1,0x80800000)
+ WDCR_SDRAM(SDRAM0_CFG,0x80800000)
..sdri_done:
blr /* Return to calling function */
|
+-------------------------------------------------------------------------*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr (uicpr, 0xFFFFFF83); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr (UIC0PR, 0xFFFFFF83); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtebc (EBC0_CFG, 0xa8400000); /* EBC always driven */
tot_size = 0;
- mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
tmp = mfdcr (SDRAM0_CFGDATA);
if (tmp & 0x00000001) {
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
tot_size += bank_size;
}
- mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
tmp = mfdcr (SDRAM0_CFGDATA);
if (tmp & 0x00000001) {
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
tot_size += bank_size;
}
- mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
tmp = mfdcr (SDRAM0_CFGDATA);
if (tmp & 0x00000001) {
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
tot_size += bank_size;
}
- mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
tmp = mfdcr (SDRAM0_CFGDATA);
if (tmp & 0x00000001) {
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
* Disable memory controller to allow
* values to be changed.
*/
- WDCR_SDRAM(mem_mcopt1, 0x00000000)
+ WDCR_SDRAM(SDRAM0_CFG, 0x00000000)
/*
* Configure Memory Banks
*/
- WDCR_SDRAM(mem_mb0cf, 0x00062001)
- WDCR_SDRAM(mem_mb1cf, 0x00000000)
- WDCR_SDRAM(mem_mb2cf, 0x00000000)
- WDCR_SDRAM(mem_mb3cf, 0x00000000)
+ WDCR_SDRAM(SDRAM0_B0CR, 0x00062001)
+ WDCR_SDRAM(SDRAM0_B1CR, 0x00000000)
+ WDCR_SDRAM(SDRAM0_B2CR, 0x00000000)
+ WDCR_SDRAM(SDRAM0_B3CR, 0x00000000)
/*
* Set up SDTR1 (SDRAM Timing Register)
*/
- WDCR_SDRAM(mem_sdtr1, 0x00854009)
+ WDCR_SDRAM(SDRAM0_TR, 0x00854009)
/*
* Set RTR (Refresh Timing Register)
*/
- WDCR_SDRAM(mem_rtr, 0x10000000)
- /* WDCR_SDRAM(mem_rtr, 0x05f00000) */
+ WDCR_SDRAM(SDRAM0_RTR, 0x10000000)
+ /* WDCR_SDRAM(SDRAM0_RTR, 0x05f00000) */
/********************************************************************
* Delay to ensure 200usec have elapsed since reset. Assume worst
/********************************************************************
* Set memory controller options reg, MCOPT1.
*******************************************************************/
- WDCR_SDRAM(mem_mcopt1,0x80800000)
+ WDCR_SDRAM(SDRAM0_CFG,0x80800000)
..sdri_done:
blr /* Return to calling function */
* IRQ 30 (EXT IRQ 5)
* IRQ 31 (EXT IRQ 6)
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
|
+-------------------------------------------------------------------------*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all SMI to be non-critical */
- mtdcr (uicpr, 0xFFFFFF88); /* set int polarities; IRQ3 to 1 */
- mtdcr (uictr, 0x10000000); /* set int trigger levels, UART0 is EDGE */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000000); /* set all SMI to be non-critical */
+ mtdcr (UIC0PR, 0xFFFFFF88); /* set int polarities; IRQ3 to 1 */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels, UART0 is EDGE */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr (CPC0_CR0, 0x00002000); /* set IRQ6 as GPIO23 to generate an interrupt request to the PCP2PCI bridge */
/* Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2) */
/*------------------------------------------------------------------- */
- addi r4,0,mem_mb0cf
+ addi r4,0,SDRAM0_B0CR
mtdcr SDRAM0_CFGADDR,r4
addis r4,0,MB0CF@h
ori r4,r4,MB0CF@l
/* Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2) */
/*------------------------------------------------------------------- */
- addi r4,0,mem_mb1cf
+ addi r4,0,SDRAM0_B1CR
mtdcr SDRAM0_CFGADDR,r4
addis r4,0,MB1CF@h
ori r4,r4,MB1CF@l
/* Set MB2CF for bank 2. off */
/*------------------------------------------------------------------- */
- addi r4,0,mem_mb2cf
+ addi r4,0,SDRAM0_B2CR
mtdcr SDRAM0_CFGADDR,r4
addis r4,0,MB2CF@h
ori r4,r4,MB2CF@l
/* Set MB3CF for bank 3. off */
/*------------------------------------------------------------------- */
- addi r4,0,mem_mb3cf
+ addi r4,0,SDRAM0_B3CR
mtdcr SDRAM0_CFGADDR,r4
addis r4,0,MB3CF@h
ori r4,r4,MB3CF@l
/*------------------------------------------------------------------- */
/* Set SDTR1 */
/*------------------------------------------------------------------- */
- addi r4,0,mem_sdtr1
+ addi r4,0,SDRAM0_TR
mtdcr SDRAM0_CFGADDR,r4
mtdcr SDRAM0_CFGDATA,r6
/*------------------------------------------------------------------- */
/* Set RTR */
/*------------------------------------------------------------------- */
- addi r4,0,mem_rtr
+ addi r4,0,SDRAM0_RTR
mtdcr SDRAM0_CFGADDR,r4
mtdcr SDRAM0_CFGDATA,r7
/* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */
/* read/prefetch. */
/*------------------------------------------------------------------- */
- addi r4,0,mem_mcopt1
+ addi r4,0,SDRAM0_CFG
mtdcr SDRAM0_CFGADDR,r4
addis r4,0,0x8080 /* set DC_EN=1 */
ori r4,r4,0x0000
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0 */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0 */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks
* IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr (uicpr, 0xFFFFFF81); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr (UIC0PR, 0xFFFFFF81); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
out_be16((void *)0xf03000ec, 0x0fff); /* enable interrupts in fpga */
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF9F); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFF9F); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
* IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr (uicpr, 0xFFFFFF81); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr (UIC0PR, 0xFFFFFF81); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
return 0;
}
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
* IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
* IRQ 31 (EXT IRQ 6) unused
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
-
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */
+
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
return 0;
}
* IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
#if defined(CONFIG_CPCI405_6U)
if (cpci405_version() == 3) {
- mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */
+ mtdcr(UIC0PR, 0xFFFFFF99); /* set int polarities */
} else {
- mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
+ mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */
}
#else
- mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
+ mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */
#endif
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,
* INT0 highest priority */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
return 0;
}
* IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
- /* mtdcr(uicpr, 0xFFFFFF81); / set int polarities */
- mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
+ /* mtdcr(UIC0PR, 0xFFFFFF81); / set int polarities */
+ mtdcr (UIC0PR, 0xFFFFFF80); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
return 0;
}
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
* IRQ 30 (EXT IRQ 5) unused; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr (uicpr, 0xFFFFFFB1); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr (UIC0PR, 0xFFFFFFB1); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 100 us
/*
* Setup the interrupt controller polarities, triggers, etc.
*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */
- mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xfffff7ff); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
/*
* UIC1:
* bit30: ext. Irq 1: PLD : int 32+30
*/
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xfffffffd);
- mtdcr(uic1tr, 0x00000000);
- mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xfffffffd);
+ mtdcr(UIC1TR, 0x00000000);
+ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
/*
* UIC2
* bit3: ext. Irq 2: DCF77 : int 64+3
*/
- mtdcr(uic2sr, 0xffffffff); /* clear all */
- mtdcr(uic2er, 0x00000000); /* disable all */
- mtdcr(uic2cr, 0x00000000); /* all non-critical */
- mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
+ mtdcr(UIC2ER, 0x00000000); /* disable all */
+ mtdcr(UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
/* select Ethernet pins */
mfsdr(SDR0_PFC1, sdr0_pfc1);
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, CONFIG_SYS_UIC0_POLARITY);/* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, CONFIG_SYS_UIC0_POLARITY);/* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF9F); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFF9F); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
* IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr (uicpr, 0xFFFFFF81); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr (UIC0PR, 0xFFFFFF81); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: clear EBTC -> high-Z ebc signals between
* IRQ 30 (EXT IRQ 5) FPGA Timestamp; active low; level sensitive
* IRQ 31 (EXT IRQ 6) PCI Reset; active low; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* Setup GPIO pins (IRQ4/GPIO21 as GPIO)
pci_write_config_dword(PCIDEVID_405GP, i, *ptr++);
}
}
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
*magic = 0; /* clear pci reconfig magic again */
}
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest prio */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFF99); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest prio */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0, INT0 highest priority */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0, INT0 highest priority */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register:
* IRQ 30 (EXT IRQ 5) ETH1-PHY-IRQ#; active low; level sensitive
* IRQ 31 (EXT IRQ 6) PLD-IRQ#; active low; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0, INT0 highest prio */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0, INT0 highest prio */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register:
/*
* Setup the interrupt controller polarities, triggers, etc.
*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xfffff7ef);
- mtdcr(uic0tr, 0x00000000);
- mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
-
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffc7f5);
- mtdcr(uic1tr, 0x00000000);
- mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
-
- mtdcr(uic2sr, 0xffffffff); /* clear all */
- mtdcr(uic2er, 0x00000000); /* disable all */
- mtdcr(uic2cr, 0x00000000); /* all non-critical */
- mtdcr(uic2pr, 0x27ffffff);
- mtdcr(uic2tr, 0x00000000);
- mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xfffff7ef);
+ mtdcr(UIC0TR, 0x00000000);
+ mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffc7f5);
+ mtdcr(UIC1TR, 0x00000000);
+ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
+ mtdcr(UIC2ER, 0x00000000); /* disable all */
+ mtdcr(UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC2PR, 0x27ffffff);
+ mtdcr(UIC2TR, 0x00000000);
+ mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
/* select Ethernet pins */
mfsdr(SDR0_PFC1, sdr0_pfc1);
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFFB5); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFFB5); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF9F); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFF9F); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
|
+-------------------------------------------------------------------------*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */
- mtdcr (uicpr, 0xFFFFFF90); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000020); /* set all but FPGA SMI to be non-critical */
+ mtdcr (UIC0PR, 0xFFFFFF90); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
/* Perform reset of PHY connected to PPC via register in CPLD */
out8 (PHY_CTRL_ADDR, 0x2e); /* activate nRESET,FDX,F100,ANEN, enable output */
tot_size = 0;
- mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
tmp = mfdcr (SDRAM0_CFGDATA);
if (tmp & 0x00000001) {
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
tot_size += bank_size;
}
- mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
tmp = mfdcr (SDRAM0_CFGDATA);
if (tmp & 0x00000001) {
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
tot_size += bank_size;
}
- mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
tmp = mfdcr (SDRAM0_CFGDATA);
if (tmp & 0x00000001) {
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
tot_size += bank_size;
}
- mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
tmp = mfdcr (SDRAM0_CFGDATA);
if (tmp & 0x00000001) {
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
/*----------------------------------------------------------- */
/* Set SDTR1 */
/*----------------------------------------------------------- */
- addi r5,0,mem_sdtr1
+ addi r5,0,SDRAM0_TR
mtdcr SDRAM0_CFGADDR,r5
mtdcr SDRAM0_CFGDATA,r4
/* Set SDRAM bank 0 register and adjust r6 for next bank */
/*------------------------------------------------------ */
- addi r7,0,mem_mb0cf
+ addi r7,0,SDRAM0_B0CR
mtdcr SDRAM0_CFGADDR,r7
mtdcr SDRAM0_CFGDATA,r6
cmpi 0, r12, 2
bne b1skip
- addi r7,0,mem_mb1cf
+ addi r7,0,SDRAM0_B1CR
mtdcr SDRAM0_CFGADDR,r7
mtdcr SDRAM0_CFGDATA,r6
/* Set SDRAM bank 2 register and adjust r6 for next bank */
/*------------------------------------------------------ */
-b1skip: addi r7,0,mem_mb2cf
+b1skip: addi r7,0,SDRAM0_B2CR
mtdcr SDRAM0_CFGADDR,r7
mtdcr SDRAM0_CFGDATA,r6
cmpi 0, r12, 2
bne b3skip
- addi r7,0,mem_mb3cf
+ addi r7,0,SDRAM0_B3CR
mtdcr SDRAM0_CFGADDR,r7
mtdcr SDRAM0_CFGDATA,r6
b3skip:
addis r7, 0, 0x05F0 /* RTR value for 100Mhz */
bl rtr_2
rtr_1: addis r7, 0, 0x03F8
-rtr_2: addi r4,0,mem_rtr
+rtr_2: addi r4,0,SDRAM0_RTR
mtdcr SDRAM0_CFGADDR,r4
mtdcr SDRAM0_CFGDATA,r7
/* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */
/* read/prefetch. */
/*----------------------------------------------------------- */
- addi r4,0,mem_mcopt1
+ addi r4,0,SDRAM0_CFG
mtdcr SDRAM0_CFGADDR,r4
addis r4,0,0x80C0 /* set DC_EN=1 */
ori r4,r4,0x0000
#endif
#include <spd_sdram.h>
#include <asm/mmu.h>
+#include <asm/io.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
+#include <hwconfig.h>
+#include <fdt_support.h>
#if defined(CONFIG_PQ_MDS_PIB)
#include "../common/pq-mds-pib.h"
#endif
+#include "../../../drivers/qe/uec.h"
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* GETH1 */
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
};
-int board_early_init_f(void)
+/* Handle "mpc8360ea rev.2.1 erratum 2: RGMII Timing"? */
+static int board_handle_erratum2(void)
{
+ const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
+ return REVID_MAJOR(immr->sysconf.spridr) == 2 &&
+ REVID_MINOR(immr->sysconf.spridr) == 1;
+}
+
+int board_early_init_f(void)
+{
const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
/* Enable flash write */
bcsr[0xa] &= ~0x04;
/* Enable second UART */
bcsr[0x9] &= ~0x01;
+ if (board_handle_erratum2()) {
+ void *immap = (immap_t *)(CONFIG_SYS_IMMR + 0x14a8);
+
+ /*
+ * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
+ * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
+ */
+ setbits_be32(immap, 0x0c003000);
+
+ /*
+ * IMMR + 0x14AC[20:27] = 10101010
+ * (data delay for both UCC's)
+ */
+ clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
+ }
return 0;
}
return 0;
}
+#ifdef CONFIG_UEC_ETH
+static uec_info_t uec_info[] = {
+#ifdef CONFIG_UEC_ETH1
+ STD_UEC_INFO(1),
+#endif
+#ifdef CONFIG_UEC_ETH2
+ STD_UEC_INFO(2),
+#endif
+};
+
+int board_eth_init(bd_t *bd)
+{
+ if (board_handle_erratum2()) {
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(uec_info); i++)
+ uec_info[i].enet_interface = ENET_1000_RGMII_RXID;
+ }
+ return uec_eth_init(bd, uec_info, ARRAY_SIZE(uec_info));
+}
+#endif /* CONFIG_UEC_ETH */
+
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
+ u32 lbc_sdram_size;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
return -1;
/*
* Initialize SDRAM if it is on local bus.
*/
- msize += sdram_init(msize * 1024 * 1024);
+ lbc_sdram_size = sdram_init(msize * 1024 * 1024);
+ if (!msize)
+ msize = lbc_sdram_size;
/* return total bus SDRAM size(bytes) -- DDR */
return (msize * 1024 * 1024);
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+static void ft_board_fixup_qe_usb(void *blob, bd_t *bd)
{
- const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ if (!hwconfig_subarg_cmp("qe_usb", "mode", "peripheral"))
+ return;
+
+ do_fixup_by_compat(blob, "fsl,mpc8323-qe-usb", "mode",
+ "peripheral", sizeof("peripheral"), 1);
+}
+void ft_board_setup(void *blob, bd_t *bd)
+{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+ ft_board_fixup_qe_usb(blob, bd);
/*
* mpc8360ea pb mds errata 2: RGMII timing
* if on mpc8360ea rev. 2.1,
* change both ucc phy-connection-types from rgmii-id to rgmii-rxid
*/
- if ((REVID_MAJOR(immr->sysconf.spridr) == 2) &&
- (REVID_MINOR(immr->sysconf.spridr) == 1)) {
+ if (board_handle_erratum2()) {
int nodeoffset;
const char *prop;
int path;
#
# mpc8536ds board
#
+ifndef NAND_SPL
+ifeq ($(CONFIG_MK_NAND), y)
+TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+LDSCRIPT := $(TOPDIR)/cpu/$(CPU)/u-boot-nand.lds
+endif
+endif
+
+ifeq ($(CONFIG_MK_SDCARD), y)
+TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+RESET_VECTOR_ADDRESS = 0xf8fffffc
+endif
+
+ifeq ($(CONFIG_MK_SPIFLASH), y)
+TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+RESET_VECTOR_ADDRESS = 0xf8fffffc
+endif
+
ifndef TEXT_BASE
TEXT_BASE = 0xeff80000
endif
+ifndef RESET_VECTOR_ADDRESS
RESET_VECTOR_ADDRESS = 0xeffffffc
+endif
SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 4, BOOKE_PAGESZ_1M, 1),
+
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
+ /* *I*G - L2SRAM */
+ SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_256K, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
+ CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 6, BOOKE_PAGESZ_256K, 1),
+#endif
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);
int board_early_init_f (void)
{
#if 0 /* test-only */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000010);
- mtdcr (uicpr, 0xFFFF7FF0); /* set int polarities */
- mtdcr (uictr, 0x00000010); /* set int trigger levels */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000010);
+ mtdcr (UIC0PR, 0xFFFF7FF0); /* set int polarities */
+ mtdcr (UIC0TR, 0x00000010); /* set int trigger levels */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
#else
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFFF0); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFFF0); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
#endif
#if 1 /* test-only */
long int init_sdram_static_settings(void)
{
-#define mtsdram0(reg, data) mtdcr(SDRAM0_CFGADDR,reg);mtdcr(SDRAM0_CFGDATA,data)
/* disable memcontroller so updates work */
- mtsdram0( mem_mcopt1, MEM_MCOPT1_INIT_VAL );
- mtsdram0( mem_rtr , MEM_RTR_INIT_VAL );
- mtsdram0( mem_pmit , MEM_PMIT_INIT_VAL );
- mtsdram0( mem_mb0cf , MEM_MB0CF_INIT_VAL );
- mtsdram0( mem_mb1cf , MEM_MB1CF_INIT_VAL );
- mtsdram0( mem_sdtr1 , MEM_SDTR1_INIT_VAL );
+ mtsdram(SDRAM0_CFG, MEM_MCOPT1_INIT_VAL);
+ mtsdram(SDRAM0_RTR, MEM_RTR_INIT_VAL);
+ mtsdram(SDRAM0_PMIT, MEM_PMIT_INIT_VAL);
+ mtsdram(SDRAM0_B0CR, MEM_MB0CF_INIT_VAL);
+ mtsdram(SDRAM0_B1CR, MEM_MB1CF_INIT_VAL);
+ mtsdram(SDRAM0_TR, MEM_SDTR1_INIT_VAL);
/* SDRAM have a power on delay, 500 micro should do */
udelay(500);
- mtsdram0( mem_mcopt1, MEM_MCOPT1_INIT_VAL|SDRAM0_CFG_ENABLE );
+ mtsdram(SDRAM0_CFG, MEM_MCOPT1_INIT_VAL|SDRAM0_CFG_ENABLE);
return (CONFIG_SYS_SDRAM_SIZE); /* CONFIG_SYS_SDRAM_SIZE is in G2000.h */
}
int board_early_init_f(void)
{
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest prio */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest prio */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks
/*
* Setup the interrupt controller polarities, triggers, etc.
*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
- mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
-
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000009); /* ATI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
/*
* Setup other serial configuration
/*
* Setup the interrupt controller polarities, triggers, etc.
*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
-
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
-
- mtdcr(uic2sr, 0xffffffff); /* clear all */
- mtdcr(uic2er, 0x00000000); /* disable all */
- mtdcr(uic2cr, 0x00000000); /* all non-critical */
- mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic2sr, 0xffffffff); /* clear all */
-
- mtdcr(uic3sr, 0xffffffff); /* clear all */
- mtdcr(uic3er, 0x00000000); /* disable all */
- mtdcr(uic3cr, 0x00000000); /* all non-critical */
- mtdcr(uic3pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic3tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic3vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic3sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
+ mtdcr(UIC2ER, 0x00000000); /* disable all */
+ mtdcr(UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC3SR, 0xffffffff); /* clear all */
+ mtdcr(UIC3ER, 0x00000000); /* disable all */
+ mtdcr(UIC3CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC3TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC3SR, 0xffffffff); /* clear all */
/*
* Configure PFC (Pin Function Control) registers
int board_early_init_f(void)
{
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest prio */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest prio */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks
| IRQ 30 (EXT IRQ 5) SystemACE BRdy (unused)
| IRQ 31 (EXT IRQ 6) (unused)
+-------------------------------------------------------------------------*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr (uicpr, 0xFFFFFF87); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr (UIC0PR, 0xFFFFFF87); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
/* Configure the interface to the SystemACE MCU port.
The SystemACE is fast, but there is no reason to have
/* Configure the SDRAMS */
/* disable memory controller */
- mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
mtdcr (SDRAM0_CFGDATA, 0x00000000);
udelay (500);
/* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
- mtdcr (SDRAM0_CFGADDR, mem_besra);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_BESR0);
mtdcr (SDRAM0_CFGDATA, 0xffffffff);
/* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
- mtdcr (SDRAM0_CFGADDR, mem_besrb);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_BESR1);
mtdcr (SDRAM0_CFGDATA, 0xffffffff);
/* Clear SDRAM0_ECCCFG (disable ECC) */
- mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG);
mtdcr (SDRAM0_CFGDATA, 0x00000000);
/* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
- mtdcr (SDRAM0_CFGADDR, mem_eccerr);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCESR);
mtdcr (SDRAM0_CFGDATA, 0xffffffff);
/* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2 */
- mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_TR);
mtdcr (SDRAM0_CFGDATA, 0x010a4016);
/* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1 */
- mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
mtdcr (SDRAM0_CFGDATA, 0x00084001);
/* Memory Bank 1 Config == BA=0x04000000, SZ=64M, AM=3, BE=1 */
- mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
mtdcr (SDRAM0_CFGDATA, 0x04084001);
/* Memory Bank 2 Config == BE=0 */
- mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
mtdcr (SDRAM0_CFGDATA, 0x00000000);
/* Memory Bank 3 Config == BE=0 */
- mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
mtdcr (SDRAM0_CFGDATA, 0x00000000);
/* refresh timer = 0x400 */
- mtdcr (SDRAM0_CFGADDR, mem_rtr);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
mtdcr (SDRAM0_CFGDATA, 0x04000000);
/* Power management idle timer set to the default. */
- mtdcr (SDRAM0_CFGADDR, mem_pmit);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_PMIT);
mtdcr (SDRAM0_CFGDATA, 0x07c00000);
udelay (500);
/* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) */
- mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
mtdcr (SDRAM0_CFGDATA, 0x80e00000);
return SDRAM_LEN;
#ifdef DEBUG
printf ("SDRAM Controller Registers --\n");
- mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
val = mfdcr (SDRAM0_CFGDATA);
printf (" SDRAM0_CFG : 0x%08x\n", val);
val = mfdcr (SDRAM0_CFGDATA);
printf (" SDRAM0_STATUS: 0x%08x\n", val);
- mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
val = mfdcr (SDRAM0_CFGDATA);
printf (" SDRAM0_B0CR : 0x%08x\n", val);
- mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
val = mfdcr (SDRAM0_CFGDATA);
printf (" SDRAM0_B1CR : 0x%08x\n", val);
- mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_TR);
val = mfdcr (SDRAM0_CFGDATA);
printf (" SDRAM0_TR : 0x%08x\n", val);
- mtdcr (SDRAM0_CFGADDR, mem_rtr);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
val = mfdcr (SDRAM0_CFGDATA);
printf (" SDRAM0_RTR : 0x%08x\n", val);
#endif
/*
* Setup the interrupt controller polarities, triggers, etc.
*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */
- mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
-
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
-
- mtdcr(uic2sr, 0xffffffff); /* clear all */
- mtdcr(uic2er, 0x00000000); /* disable all */
- mtdcr(uic2cr, 0x00000000); /* all non-critical */
- mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xfffff7ff); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
+ mtdcr(UIC2ER, 0x00000000); /* disable all */
+ mtdcr(UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
/*
* Take sim card reader and CF controller out of reset. Also enable PHY
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
- mtdcr(uic0sr, 0xffffffff); /* clear all. if write with 1 then the status is cleared */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000000); /* we have not critical interrupts at the moment */
- mtdcr(uic0pr, 0xFFBFF1EF); /* Adjustment of the polarity */
- mtdcr(uic0tr, 0x00000900); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
-
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xFFFFC6A5); /* Adjustment of the polarity */
- mtdcr(uic1tr, 0x60000040); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
-
- mtdcr(uic2sr, 0xffffffff); /* clear all */
- mtdcr(uic2er, 0x00000000); /* disable all */
- mtdcr(uic2cr, 0x00000000); /* all non-critical */
- mtdcr(uic2pr, 0x27C00000); /* Adjustment of the polarity */
- mtdcr(uic2tr, 0x3C000000); /* per ref-board manual */
- mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
- mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all. if write with 1 then the status is cleared */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000000); /* we have not critical interrupts at the moment */
+ mtdcr(UIC0PR, 0xFFBFF1EF); /* Adjustment of the polarity */
+ mtdcr(UIC0TR, 0x00000900); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xFFFFC6A5); /* Adjustment of the polarity */
+ mtdcr(UIC1TR, 0x60000040); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
+ mtdcr(UIC2ER, 0x00000000); /* disable all */
+ mtdcr(UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC2PR, 0x27C00000); /* Adjustment of the polarity */
+ mtdcr(UIC2TR, 0x3C000000); /* per ref-board manual */
+ mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
/* Trace Pins are disabled. SDR0_PFC0 Register */
mtsdr(SDR0_PFC0, 0x0);
chip->write_word = ebi_nand_write_word;
chip->read_bufferram = ebi_read_bufferram;
- chip->read_spareram = ebi_read_bufferram;
chip->write_bufferram = ebi_write_bufferram;
}
/* trc_clocks is sum of trp_clocks + tras_clocks */
trc_clocks = trp_clocks + tras_clocks;
/* get SDRAM timing register */
- mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_TR);
sdram_tim = mfdcr (SDRAM0_CFGDATA) & ~0x018FC01F;
/* insert CASL value */
sdram_tim |= ((unsigned long) (cal_val)) << 23;
/* insert SZ value; */
tmp |= ((unsigned long) sdram_table[i].sz << 17);
/* get SDRAM bank 0 register */
- mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
sdram_bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
sdram_bank |= (baseaddr | tmp | 0x01);
#endif
/* write SDRAM timing register */
- mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_TR);
mtdcr (SDRAM0_CFGDATA, sdram_tim);
#ifdef SDRAM_DEBUG
#endif
/* write SDRAM bank 0 register */
- mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
mtdcr (SDRAM0_CFGDATA, sdram_bank);
if (get_bus_freq (tmp) > 110000000) { /* > 110MHz */
/* get SDRAM refresh interval register */
- mtdcr (SDRAM0_CFGADDR, mem_rtr);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000;
tmp |= 0x07F00000;
} else {
/* get SDRAM refresh interval register */
- mtdcr (SDRAM0_CFGADDR, mem_rtr);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000;
tmp |= 0x05F00000;
}
/* write SDRAM refresh interval register */
- mtdcr (SDRAM0_CFGADDR, mem_rtr);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
mtdcr (SDRAM0_CFGDATA, tmp);
/* enable ECC if used */
#if defined(ENABLE_ECC) && !defined(CONFIG_BOOT_PCI)
#ifdef SDRAM_DEBUG
serial_puts ("disable ECC.. ");
#endif
- mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG);
tmp = mfdcr (SDRAM0_CFGDATA);
tmp &= 0xff0fffff; /* disable all banks */
- mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG);
/* set up SDRAM Controller with ECC enabled */
#ifdef SDRAM_DEBUG
serial_puts ("setup SDRAM Controller.. ");
#endif
mtdcr (SDRAM0_CFGDATA, tmp);
- mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x90800000;
- mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
mtdcr (SDRAM0_CFGDATA, tmp);
udelay (600);
#ifdef SDRAM_DEBUG
serial_puts ("enable ECC\n");
#endif
udelay (400);
- mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG);
tmp = mfdcr (SDRAM0_CFGDATA);
tmp |= 0x00800000; /* enable bank 0 */
mtdcr (SDRAM0_CFGDATA, tmp);
#endif
{
/* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */
- mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x80C00000;
- mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
mtdcr (SDRAM0_CFGDATA, tmp);
udelay (400);
}
| caused the interrupt.
|
+-------------------------------------------------------------------------*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all to be non-critical (for now) */
- mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical (for now) */
+ mtdcr (UIC0PR, 0xFFFFFF80); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
return 0;
}
ds = 0;
/* since the DRAM controller is allready set up, calculate the size with the
bank registers */
- mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
bank_reg[0] = mfdcr (SDRAM0_CFGDATA);
- mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
bank_reg[1] = mfdcr (SDRAM0_CFGDATA);
- mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
bank_reg[2] = mfdcr (SDRAM0_CFGDATA);
- mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
bank_reg[3] = mfdcr (SDRAM0_CFGDATA);
TotalSize = 0;
for (i = 0; i < 4; i++) {
} else
ds = 1;
}
- mtdcr (SDRAM0_CFGADDR, mem_ecccf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_ECCCFG);
tmp = mfdcr (SDRAM0_CFGDATA);
if (!tmp)
SDRAM_err ("unsupported SDRAM");
/* get SDRAM timing register */
- mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_TR);
tmp = mfdcr (SDRAM0_CFGDATA) & ~0x018FC01F;
/* insert CASL value */
/* tmp |= ((unsigned long)cal_val) << 23; */
#endif
/* write SDRAM timing register */
- mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_TR);
mtdcr (SDRAM0_CFGDATA, tmp);
baseaddr = CONFIG_SYS_SDRAM_BASE;
bank_size = (((unsigned long) density) << 22) / 2;
SDRAM_err ("unsupported SDRAM");
} /* endswitch */
/* get SDRAM bank 0 register */
- mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
bank |= (baseaddr | tmp | 0x01);
#ifdef SDRAM_DEBUG
sdram_size += bank_size;
/* write SDRAM bank 0 register */
- mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
mtdcr (SDRAM0_CFGDATA, bank);
/* get SDRAM bank 1 register */
- mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
sdram_size = 0;
serial_puts ("\n");
#endif
/* write SDRAM bank 1 register */
- mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
mtdcr (SDRAM0_CFGDATA, bank);
/* get SDRAM bank 2 register */
- mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
bank |= (baseaddr | tmp | 0x01);
sdram_size += bank_size;
/* write SDRAM bank 2 register */
- mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
mtdcr (SDRAM0_CFGDATA, bank);
/* get SDRAM bank 3 register */
- mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
bank = mfdcr (SDRAM0_CFGDATA) & ~0xFFCEE001;
#ifdef SDRAM_DEBUG
#endif
/* write SDRAM bank 3 register */
- mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
mtdcr (SDRAM0_CFGDATA, bank);
/* get SDRAM refresh interval register */
- mtdcr (SDRAM0_CFGADDR, mem_rtr);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
tmp = mfdcr (SDRAM0_CFGDATA) & ~0x3FF80000;
if (tmemclk < NSto10PS (16))
tmp |= 0x03F80000;
/* write SDRAM refresh interval register */
- mtdcr (SDRAM0_CFGADDR, mem_rtr);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
mtdcr (SDRAM0_CFGDATA, tmp);
/* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */
- mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
tmp = (mfdcr (SDRAM0_CFGDATA) & ~0xFFE00000) | 0x80E00000;
- mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
mtdcr (SDRAM0_CFGDATA, tmp);
| caused the interrupt.
|
+-------------------------------------------------------------------------*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all to be non-critical (for now) */
- mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical (for now) */
+ mtdcr (UIC0PR, 0xFFFFFF80); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
return 0;
}
/* since the DRAM controller is allready set up,
* calculate the size with the bank registers
*/
- mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
bank_reg[0] = mfdcr (SDRAM0_CFGDATA);
- mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
bank_reg[1] = mfdcr (SDRAM0_CFGDATA);
- mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
bank_reg[2] = mfdcr (SDRAM0_CFGDATA);
- mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
bank_reg[3] = mfdcr (SDRAM0_CFGDATA);
TotalSize = 0;
for (i = 0; i < 4; i++) {
u32 value;
printf("SDRAM Controller Registers --\n");
- mfsdram(mem_mcopt1, value);
+ mfsdram(SDRAM0_CFG, value);
printf(" SDRAM0_CFG : 0x%08x\n", value);
- mfsdram(mem_status, value);
+ mfsdram(SDRAM0_STATUS, value);
printf(" SDRAM0_STATUS: 0x%08x\n", value);
- mfsdram(mem_mb0cf, value);
+ mfsdram(SDRAM0_B0CR, value);
printf(" SDRAM0_B0CR : 0x%08x\n", value);
- mfsdram(mem_mb1cf, value);
+ mfsdram(SDRAM0_B1CR, value);
printf(" SDRAM0_B1CR : 0x%08x\n", value);
- mfsdram(mem_sdtr1, value);
+ mfsdram(SDRAM0_TR, value);
printf(" SDRAM0_TR : 0x%08x\n", value);
- mfsdram(mem_rtr, value);
+ mfsdram(SDRAM0_RTR, value);
printf(" SDRAM0_RTR : 0x%08x\n", value);
}
#endif
printf(__FUNCTION__);
#endif
/* disable memory controller */
- mtsdram(mem_mcopt1, 0x00000000);
+ mtsdram(SDRAM0_CFG, 0x00000000);
udelay (500);
/* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
- mtsdram(mem_besra, 0xffffffff);
+ mtsdram(SDRAM0_BESR0, 0xffffffff);
/* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
- mtsdram(mem_besrb, 0xffffffff);
+ mtsdram(SDRAM0_BESR1, 0xffffffff);
/* Clear SDRAM0_ECCCFG (disable ECC) */
- mtsdram(mem_ecccf, 0x00000000);
+ mtsdram(SDRAM0_ECCCFG, 0x00000000);
/* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
- mtsdram(mem_eccerr, 0xffffffff);
+ mtsdram(SDRAM0_ECCESR, 0xffffffff);
/* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2
*/
- mtsdram(mem_sdtr1, 0x008a4015);
+ mtsdram(SDRAM0_TR, 0x008a4015);
/* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1
* and refresh timer
*/
switch (dram_size >> 20) {
case 32:
- mtsdram(mem_mb0cf, 0x00062001);
- mtsdram(mem_rtr, 0x07F00000);
+ mtsdram(SDRAM0_B0CR, 0x00062001);
+ mtsdram(SDRAM0_RTR, 0x07F00000);
break;
case 64:
- mtsdram(mem_mb0cf, 0x00084001);
- mtsdram(mem_rtr, 0x04100000);
+ mtsdram(SDRAM0_B0CR, 0x00084001);
+ mtsdram(SDRAM0_RTR, 0x04100000);
break;
case 128:
- mtsdram(mem_mb0cf, 0x000A4001);
- mtsdram(mem_rtr, 0x04100000);
+ mtsdram(SDRAM0_B0CR, 0x000A4001);
+ mtsdram(SDRAM0_RTR, 0x04100000);
break;
default:
printf("Invalid memory size of %d MB given\n", dram_size >> 20);
}
/* Power management idle timer set to the default. */
- mtsdram(mem_pmit, 0x07c00000);
+ mtsdram(SDRAM0_PMIT, 0x07c00000);
udelay (500);
/* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */
- mtsdram(mem_mcopt1, 0x90800000);
+ mtsdram(SDRAM0_CFG, 0x90800000);
#ifdef DEBUG
printf("%s: done\n", __FUNCTION__);
* IRQ 17-24 RESERVED/UNUSED
* IRQ 31 (EXT IRQ 6) (unused)
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr(uicpr, 0xFFFFE000); /* set int polarities */
- mtdcr(uictr, 0x00000000); /* set int trigger levels */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr(UIC0PR, 0xFFFFE000); /* set int polarities */
+ mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr(CPC0_CR1, CPC0_CR1_VALUE);
mtdcr(CPC0_ECR, 0x60606000);
/*
* Setup the interrupt controller polarities, triggers, etc.
*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
- mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */
- mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
-
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
-
- mtdcr(uic2sr, 0xffffffff); /* clear all */
- mtdcr(uic2er, 0x00000000); /* disable all */
- mtdcr(uic2cr, 0x00000000); /* all non-critical */
- mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
- mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
- mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(UIC0PR, 0xfffff7ff); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
+ mtdcr(UIC2ER, 0x00000000); /* disable all */
+ mtdcr(UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */
+ mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
mtsdr(SDR0_PFC0, 0x00003E00); /* Pin function: */
mtsdr(SDR0_PFC1, 0x00848000); /* Pin function: UART0 has 4 pins */
* IRQ 17-24 RESERVED/UNUSED
* IRQ 31 (EXT IRQ 6) (unused)
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr(uicpr, 0xFFFFE000); /* set int polarities */
- mtdcr(uictr, 0x00000000); /* set int trigger levels */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr(UIC0PR, 0xFFFFE000); /* set int polarities */
+ mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr(CPC0_CR1, CPC0_CR1_VALUE);
mtdcr(CPC0_ECR, 0x60606000);
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000001); /* UIC1 crit is critical */
- mtdcr(uic0pr, 0xfffffe1f); /* per ref-board manual */
- mtdcr(uic0tr, 0x01c00000); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
-
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000001); /* UIC1 crit is critical */
+ mtdcr(UIC0PR, 0xfffffe1f); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x01c00000); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
/*--------------------------------------------------------------------
* Setup other serial configuration
* UIC2 UIC1
* UIC3 UIC2
*/
- mtdcr (uic1sr, 0xffffffff); /* clear all */
- mtdcr (uic1er, 0x00000000); /* disable all */
- mtdcr (uic1cr, 0x00000009); /* SMI & UIC1 crit are critical */
- mtdcr (uic1pr, 0xfffffe03); /* per manual */
- mtdcr (uic1tr, 0x01c00000); /* per manual */
- mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic1sr, 0xffffffff); /* clear all */
-
- mtdcr (uic2sr, 0xffffffff); /* clear all */
- mtdcr (uic2er, 0x00000000); /* disable all */
- mtdcr (uic2cr, 0x00000000); /* all non-critical */
- mtdcr (uic2pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr (uic2tr, 0x00ffc000); /* per ref-board manual */
- mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic2sr, 0xffffffff); /* clear all */
-
- mtdcr (uic3sr, 0xffffffff); /* clear all */
- mtdcr (uic3er, 0x00000000); /* disable all */
- mtdcr (uic3cr, 0x00000000); /* all non-critical */
- mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */
- mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */
- mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic3sr, 0xffffffff); /* clear all */
-
- mtdcr (uic0sr, 0xfc000000); /* clear all */
- mtdcr (uic0er, 0x00000000); /* disable all */
- mtdcr (uic0cr, 0x00000000); /* all non-critical */
- mtdcr (uic0pr, 0xfc000000); /* */
- mtdcr (uic0tr, 0x00000000); /* */
- mtdcr (uic0vr, 0x00000001); /* */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+ mtdcr (UIC1ER, 0x00000000); /* disable all */
+ mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr (UIC1PR, 0xfffffe03); /* per manual */
+ mtdcr (UIC1TR, 0x01c00000); /* per manual */
+ mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+ mtdcr (UIC2ER, 0x00000000); /* disable all */
+ mtdcr (UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+ mtdcr (UIC3ER, 0x00000000); /* disable all */
+ mtdcr (UIC3CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */
+ mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */
+ mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC0SR, 0xfc000000); /* clear all */
+ mtdcr (UIC0ER, 0x00000000); /* disable all */
+ mtdcr (UIC0CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC0PR, 0xfc000000); /* */
+ mtdcr (UIC0TR, 0x00000000); /* */
+ mtdcr (UIC0VR, 0x00000001); /* */
/* Setup shutdown/SSD empty interrupt as inputs */
out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CONFIG_SYS_GPIO_SHUTDOWN | CONFIG_SYS_GPIO_SSD_EMPTY));
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
- mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000001); /* UIC1 crit is critical */
- mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
- mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
- mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic0sr, 0xffffffff); /* clear all */
-
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000000); /* all non-critical */
- mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000001); /* UIC1 crit is critical */
+ mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */
+ mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */
+ mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC0SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
return 0;
}
int board_early_init_f(void)
{
/* taken from PPCBoot */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000);
- mtdcr(uicpr, 0xFFFF7FFE); /* set int polarities */
- mtdcr(uictr, 0x00000000); /* set int trigger levels */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000);
+ mtdcr(UIC0PR, 0xFFFF7FFE); /* set int polarities */
+ mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
mtdcr(CPC0_SRR, 0x00040000); /* Hold PCI bridge in reset */
/*--------------------------------------------------------------------
* Setup some default
*------------------------------------------------------------------*/
- mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */
- mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
- mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
- mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
- mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+ mtsdram (SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */
+ mtsdram (SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram (SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram (SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */
+ mtsdram (SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
/*--------------------------------------------------------------------
* Setup for board-specific specific mem
/*
* Following for CAS Latency = 2.5 @ 133 MHz PLB
*/
- mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
- mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
+ mtsdram (SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram (SDRAM0_TR0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
/* RA=10 RD=3 */
- mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
- mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
- mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
+ mtsdram (SDRAM0_TR1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
+ mtsdram (SDRAM0_RTR, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
+ mtsdram (SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */
udelay (400); /* Delay 200 usecs (min) */
/*--------------------------------------------------------------------
* Enable the controller, then wait for DCEN to complete
*------------------------------------------------------------------*/
- mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
+ mtsdram (SDRAM0_CFG0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
for (;;) {
- mfsdram (mem_mcsts, reg);
+ mfsdram (SDRAM0_MCSTS, reg);
if (reg & 0x80000000)
break;
}
* UIC2 UIC1
* UIC3 UIC2
*/
- mtdcr (uic1sr, 0xffffffff); /* clear all */
- mtdcr (uic1er, 0x00000000); /* disable all */
- mtdcr (uic1cr, 0x00000000); /* all non- critical */
- mtdcr (uic1pr, 0xfffffe03); /* polarity */
- mtdcr (uic1tr, 0x01c00000); /* trigger edge vs level */
- mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic1sr, 0xffffffff); /* clear all */
-
- mtdcr (uic2sr, 0xffffffff); /* clear all */
- mtdcr (uic2er, 0x00000000); /* disable all */
- mtdcr (uic2cr, 0x00000000); /* all non-critical */
- mtdcr (uic2pr, 0xffffc8ff); /* polarity */
- mtdcr (uic2tr, 0x00ff0000); /* trigger edge vs level */
- mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic2sr, 0xffffffff); /* clear all */
-
- mtdcr (uic3sr, 0xffffffff); /* clear all */
- mtdcr (uic3er, 0x00000000); /* disable all */
- mtdcr (uic3cr, 0x00000000); /* all non-critical */
- mtdcr (uic3pr, 0xffff83ff); /* polarity */
- mtdcr (uic3tr, 0x00ff8c0f); /* trigger edge vs level */
- mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic3sr, 0xffffffff); /* clear all */
-
- mtdcr (uic0sr, 0xfc000000); /* clear all */
- mtdcr (uic0er, 0x00000000); /* disable all */
- mtdcr (uic0cr, 0x00000000); /* all non-critical */
- mtdcr (uic0pr, 0xfc000000);
- mtdcr (uic0tr, 0x00000000);
- mtdcr (uic0vr, 0x00000001);
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+ mtdcr (UIC1ER, 0x00000000); /* disable all */
+ mtdcr (UIC1CR, 0x00000000); /* all non- critical */
+ mtdcr (UIC1PR, 0xfffffe03); /* polarity */
+ mtdcr (UIC1TR, 0x01c00000); /* trigger edge vs level */
+ mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+ mtdcr (UIC2ER, 0x00000000); /* disable all */
+ mtdcr (UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC2PR, 0xffffc8ff); /* polarity */
+ mtdcr (UIC2TR, 0x00ff0000); /* trigger edge vs level */
+ mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+ mtdcr (UIC3ER, 0x00000000); /* disable all */
+ mtdcr (UIC3CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC3PR, 0xffff83ff); /* polarity */
+ mtdcr (UIC3TR, 0x00ff8c0f); /* trigger edge vs level */
+ mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC0SR, 0xfc000000); /* clear all */
+ mtdcr (UIC0ER, 0x00000000); /* disable all */
+ mtdcr (UIC0CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC0PR, 0xfc000000);
+ mtdcr (UIC0TR, 0x00000000);
+ mtdcr (UIC0VR, 0x00000001);
fpga_init();
* UIC2 UIC1
* UIC3 UIC2
*/
- mtdcr (uic1sr, 0xffffffff); /* clear all */
- mtdcr (uic1er, 0x00000000); /* disable all */
- mtdcr (uic1cr, 0x00000000); /* all non- critical */
- mtdcr (uic1pr, 0xfffffe03); /* polarity */
- mtdcr (uic1tr, 0x01c00000); /* trigger edge vs level */
- mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic1sr, 0xffffffff); /* clear all */
-
- mtdcr (uic2sr, 0xffffffff); /* clear all */
- mtdcr (uic2er, 0x00000000); /* disable all */
- mtdcr (uic2cr, 0x00000000); /* all non-critical */
- mtdcr (uic2pr, 0xffffc8ff); /* polarity */
- mtdcr (uic2tr, 0x00ff0000); /* trigger edge vs level */
- mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic2sr, 0xffffffff); /* clear all */
-
- mtdcr (uic3sr, 0xffffffff); /* clear all */
- mtdcr (uic3er, 0x00000000); /* disable all */
- mtdcr (uic3cr, 0x00000000); /* all non-critical */
- mtdcr (uic3pr, 0xffff83ff); /* polarity */
- mtdcr (uic3tr, 0x00ff8c0f); /* trigger edge vs level */
- mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic3sr, 0xffffffff); /* clear all */
-
- mtdcr (uic0sr, 0xfc000000); /* clear all */
- mtdcr (uic0er, 0x00000000); /* disable all */
- mtdcr (uic0cr, 0x00000000); /* all non-critical */
- mtdcr (uic0pr, 0xfc000000);
- mtdcr (uic0tr, 0x00000000);
- mtdcr (uic0vr, 0x00000001);
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+ mtdcr (UIC1ER, 0x00000000); /* disable all */
+ mtdcr (UIC1CR, 0x00000000); /* all non- critical */
+ mtdcr (UIC1PR, 0xfffffe03); /* polarity */
+ mtdcr (UIC1TR, 0x01c00000); /* trigger edge vs level */
+ mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+ mtdcr (UIC2ER, 0x00000000); /* disable all */
+ mtdcr (UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC2PR, 0xffffc8ff); /* polarity */
+ mtdcr (UIC2TR, 0x00ff0000); /* trigger edge vs level */
+ mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+ mtdcr (UIC3ER, 0x00000000); /* disable all */
+ mtdcr (UIC3CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC3PR, 0xffff83ff); /* polarity */
+ mtdcr (UIC3TR, 0x00ff8c0f); /* trigger edge vs level */
+ mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC0SR, 0xfc000000); /* clear all */
+ mtdcr (UIC0ER, 0x00000000); /* disable all */
+ mtdcr (UIC0CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC0PR, 0xfc000000);
+ mtdcr (UIC0TR, 0x00000000);
+ mtdcr (UIC0VR, 0x00000001);
fpga_init();
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
+ mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
# sbc8548 board
#
ifndef TEXT_BASE
-TEXT_BASE = 0xfff80000
+TEXT_BASE = 0xfffa0000
endif
writeb (cpldConfig_1, CPLD_CONTROL_1); /* disable everything in CPLD */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
if (IS_CAMERON) {
sc3_cameron_init();
mtdcr (0x0B6, 0x18000000);
- mtdcr (uicpr, 0xFFFFFFF0);
- mtdcr (uictr, 0x10001030);
+ mtdcr (UIC0PR, 0xFFFFFFF0);
+ mtdcr (UIC0TR, 0x10001030);
} else {
mtdcr (0x0B6, 0x0000000);
- mtdcr (uicpr, 0xFFFFFFE0);
- mtdcr (uictr, 0x10000020);
+ mtdcr (UIC0PR, 0xFFFFFFE0);
+ mtdcr (UIC0TR, 0x10000020);
}
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
/* setup other implementation specific details */
mtdcr (CPC0_ECR, 0x60606000);
}
#ifdef SC3_DEBUGOUT
-static unsigned int mbcf[] = {mem_mb0cf, mem_mb1cf, mem_mb2cf, mem_mb3cf};
+static unsigned int mbcf[] = {SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2CR, SDRAM0_B3CR};
#endif
phys_size_t initdram (int board_type)
puts("\nSDRAM configuration:\n");
- mtdcr (SDRAM0_CFGADDR, mem_mcopt1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_CFG);
ul1 = mfdcr(SDRAM0_CFGDATA);
if (!(ul1 & 0x80000000)) {
mems += printSDRAMConfig (i, ul1);
}
- mtdcr (SDRAM0_CFGADDR, mem_sdtr1);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_TR);
ul1 = mfdcr(SDRAM0_CFGDATA);
printf ("Timing:\n -CAS latency %lu\n", ((ul1 & 0x1800000) >> 23)+1);
printf (" -CAS to RAS %lu\n", ((ul1 & 0x1C) >> 2) + 4);
printf (" -RAS to CAS %lu\n", ((ul1 & 0x3) + 1));
puts ("Misc:\n");
- mtdcr (SDRAM0_CFGADDR, mem_rtr);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_RTR);
ul1 = mfdcr(SDRAM0_CFGDATA);
printf (" -Refresh rate: %luns\n", (ul1 >> 16) * 7);
- mtdcr(SDRAM0_CFGADDR,mem_pmit);
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_PMIT);
ul2=mfdcr(SDRAM0_CFGDATA);
- mtdcr(SDRAM0_CFGADDR,mem_mcopt1);
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_CFG);
ul1=mfdcr(SDRAM0_CFGDATA);
if (ul1 & 0x20000000)
else
puts(" -Memory lines only at write cycles active outputs\n");
- mtdcr (SDRAM0_CFGADDR, mem_status);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_STATUS);
ul1 = mfdcr (SDRAM0_CFGDATA);
if (ul1 & 0x80000000)
puts(" -SDRAM Controller ready\n");
return (mems * 1024 * 1024);
#else
- mtdcr (SDRAM0_CFGADDR, mem_mb0cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR);
ul1 = mfdcr (SDRAM0_CFGDATA);
mems = printSDRAMConfig (0, ul1);
- mtdcr (SDRAM0_CFGADDR, mem_mb1cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR);
ul1 = mfdcr (SDRAM0_CFGDATA);
mems += printSDRAMConfig (1, ul1);
- mtdcr (SDRAM0_CFGADDR, mem_mb2cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR);
ul1 = mfdcr(SDRAM0_CFGDATA);
mems += printSDRAMConfig (2, ul1);
- mtdcr (SDRAM0_CFGADDR, mem_mb3cf);
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR);
ul1 = mfdcr(SDRAM0_CFGDATA);
mems += printSDRAMConfig (3, ul1);
* Disable memory controller to allow
* values to be changed.
*/
- addi r3, 0, mem_mcopt1
+ addi r3, 0, SDRAM0_CFG
mtdcr SDRAM0_CFGADDR, r3
addis r4, 0, 0x0
ori r4, r4, 0x0
* Set MB0CF for ext bank 0. (0-4MB) Address Mode 5 since 11x8x2
* All other banks are disabled.
*/
- addi r3, 0, mem_mb0cf
+ addi r3, 0, SDRAM0_B0CR
mtdcr SDRAM0_CFGADDR, r3
addis r4, 0, 0x0000 /* BA=0x0, SZ=4MB */
ori r4, r4, 0x8001 /* Mode is 5, 11x8x2or4, BE=Enabled */
/*
* Set up SDTR1
*/
- addi r3, 0, mem_sdtr1
+ addi r3, 0, SDRAM0_TR
mtdcr SDRAM0_CFGADDR, r3
addis r4, 0, 0x0086 /* SDTR1 value for 100Mhz */
ori r4, r4, 0x400D
/*
* Set RTR
*/
- addi r3, 0, mem_rtr
+ addi r3, 0, SDRAM0_RTR
mtdcr SDRAM0_CFGADDR, r3
addis r4, 0, 0x05F0 /* RTR refresh val = 15.625ms@100Mhz */
mtdcr SDRAM0_CFGDATA, r4
/********************************************************************
* Set memory controller options reg, MCOPT1.
*******************************************************************/
- addi r3, 0, mem_mcopt1
+ addi r3, 0, SDRAM0_CFG
mtdcr SDRAM0_CFGADDR, r3
addis r4, 0, 0x80E0 /* DC_EN=1,SRE=0,PME=0,MEMCHK=0 */
ori r4, r4, 0x0000 /* REGEN=0,DRW=00,BRPF=01,ECCDD=1 */
* IRQ 30 (EXT IRQ 5) Level One PHY; active low; level sensitive
* IRQ 31 (EXT IRQ 6) SAM 1; active high; level sensitive
*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,
+ mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr (UIC0PR, 0xFFFFFF80); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,
INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
#elif defined(CONFIG_W7OLMC)
/*
* IRQ 30 (EXT IRQ 5) RCMM Reset; active low; level sensitive
* IRQ 31 (EXT IRQ 6) PHY; active high; level sensitive
*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,
+ mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr (UIC0PR, 0xFFFFFF80); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,
INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
#else /* Unknown */
# error "Unknown W7O board configuration"
int size = 0;
/* Get bank Size registers */
- mtdcr (SDRAM0_CFGADDR, mem_mb0cf); /* get bank 0 config reg */
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B0CR); /* get bank 0 config reg */
regs[0] = mfdcr (SDRAM0_CFGDATA);
- mtdcr (SDRAM0_CFGADDR, mem_mb1cf); /* get bank 1 config reg */
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B1CR); /* get bank 1 config reg */
regs[1] = mfdcr (SDRAM0_CFGDATA);
- mtdcr (SDRAM0_CFGADDR, mem_mb2cf); /* get bank 2 config reg */
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B2CR); /* get bank 2 config reg */
regs[2] = mfdcr (SDRAM0_CFGDATA);
- mtdcr (SDRAM0_CFGADDR, mem_mb3cf); /* get bank 3 config reg */
+ mtdcr (SDRAM0_CFGADDR, SDRAM0_B3CR); /* get bank 3 config reg */
regs[3] = mfdcr (SDRAM0_CFGDATA);
/* compute the size, add each bank if enabled */
* UIC2 UIC1
* UIC3 UIC2
*/
- mtdcr(uic1sr, 0xffffffff); /* clear all */
- mtdcr(uic1er, 0x00000000); /* disable all */
- mtdcr(uic1cr, 0x00000003); /* SMI & UIC1 crit are critical */
- mtdcr(uic1pr, 0xfffffe00); /* per ref-board manual */
- mtdcr(uic1tr, 0x01c00000); /* per ref-board manual */
- mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic1sr, 0xffffffff); /* clear all */
-
- mtdcr(uic2sr, 0xffffffff); /* clear all */
- mtdcr(uic2er, 0x00000000); /* disable all */
- mtdcr(uic2cr, 0x00000000); /* all non-critical */
- mtdcr(uic2pr, 0xffffc0ff); /* per ref-board manual */
- mtdcr(uic2tr, 0x00ff8000); /* per ref-board manual */
- mtdcr(uic2vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic2sr, 0xffffffff); /* clear all */
-
- mtdcr(uic3sr, 0xffffffff); /* clear all */
- mtdcr(uic3er, 0x00000000); /* disable all */
- mtdcr(uic3cr, 0x00000000); /* all non-critical */
- mtdcr(uic3pr, 0xffffffff); /* per ref-board manual */
- mtdcr(uic3tr, 0x00ff8c0f); /* per ref-board manual */
- mtdcr(uic3vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr(uic3sr, 0xffffffff); /* clear all */
-
- mtdcr(uic0sr, 0xfc000000); /* clear all */
- mtdcr(uic0er, 0x00000000); /* disable all */
- mtdcr(uic0cr, 0x00000000); /* all non-critical */
- mtdcr(uic0pr, 0xfc000000); /* */
- mtdcr(uic0tr, 0x00000000); /* */
- mtdcr(uic0vr, 0x00000001); /* */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+ mtdcr(UIC1ER, 0x00000000); /* disable all */
+ mtdcr(UIC1CR, 0x00000003); /* SMI & UIC1 crit are critical */
+ mtdcr(UIC1PR, 0xfffffe00); /* per ref-board manual */
+ mtdcr(UIC1TR, 0x01c00000); /* per ref-board manual */
+ mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
+ mtdcr(UIC2ER, 0x00000000); /* disable all */
+ mtdcr(UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC2PR, 0xffffc0ff); /* per ref-board manual */
+ mtdcr(UIC2TR, 0x00ff8000); /* per ref-board manual */
+ mtdcr(UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC2SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC3SR, 0xffffffff); /* clear all */
+ mtdcr(UIC3ER, 0x00000000); /* disable all */
+ mtdcr(UIC3CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC3TR, 0x00ff8c0f); /* per ref-board manual */
+ mtdcr(UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(UIC3SR, 0xffffffff); /* clear all */
+
+ mtdcr(UIC0SR, 0xfc000000); /* clear all */
+ mtdcr(UIC0ER, 0x00000000); /* disable all */
+ mtdcr(UIC0CR, 0x00000000); /* all non-critical */
+ mtdcr(UIC0PR, 0xfc000000); /* */
+ mtdcr(UIC0TR, 0x00000000); /* */
+ mtdcr(UIC0VR, 0x00000001); /* */
LED0_ON();
int board_early_init_f(void)
{
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000);
- mtdcr(uicpr, 0xFFFF7F00); /* set int polarities */
- mtdcr(uictr, 0x00000000); /* set int trigger levels */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000);
+ mtdcr(UIC0PR, 0xFFFF7F00); /* set int polarities */
+ mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
/*
* Configure CPC0_PCI to enable PerWE as output
* Byte stream. Convert the values.
*/
newp++;
- while ((*newp != ']') && (stridx < count)) {
- tmp = simple_strtoul(newp, &newp, 16);
- *data++ = tmp & 0xFF;
- *len = *len + 1;
+ while ((stridx < count) && (*newp != ']')) {
while (*newp == ' ')
newp++;
- if (*newp != '\0')
+ if (*newp == '\0') {
newp = newval[++stridx];
+ continue;
+ }
+ if (!isxdigit(*newp))
+ break;
+ tmp = simple_strtoul(newp, &newp, 16);
+ *data++ = tmp & 0xFF;
+ *len = *len + 1;
}
if (*newp != ']') {
printf("Unexpected character '%c'\n", *newp);
}
} else {
/*
- * Assume it is a string. Copy it into our data area for
- * convenience (including the terminating '\0').
+ * Assume it is one or more strings. Copy it into our
+ * data area for convenience (including the
+ * terminating '\0's).
*/
while (stridx < count) {
- *len = strlen(newp) + 1;
+ size_t length = strlen(newp) + 1;
strcpy(data, newp);
+ data += length;
+ *len += length;
newp = newval[++stridx];
}
}
#elif defined (CONFIG_405GP)
printf ("\n405GP registers; MSR=%08x\n",mfmsr());
printf ("\nUniversal Interrupt Controller Regs\n"
- "uicsr uicer uiccr uicpr uictr uicmsr uicvr uicvcr"
+ "UIC0SR UIC0ER UIC0CR UIC0PR UIC0TR UIC0MSR UIC0VR UIC0VCR"
"\n"
"%08x %08x %08x %08x %08x %08x %08x %08x\n",
- mfdcr(uicsr),
- mfdcr(uicer),
- mfdcr(uiccr),
- mfdcr(uicpr),
- mfdcr(uictr),
- mfdcr(uicmsr),
- mfdcr(uicvr),
- mfdcr(uicvcr));
+ mfdcr(UIC0SR),
+ mfdcr(UIC0ER),
+ mfdcr(UIC0CR),
+ mfdcr(UIC0PR),
+ mfdcr(UIC0TR),
+ mfdcr(UIC0MSR),
+ mfdcr(UIC0VR),
+ mfdcr(UIC0VCR));
puts ("\nMemory (SDRAM) Configuration\n"
"besra besrsa besrb besrsb bear mcopt1 rtr pmit\n");
- mtdcr(SDRAM0_CFGADDR,mem_besra); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_besrsa); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_besrb); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_besrsb); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_bear); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_mcopt1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_rtr); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_pmit); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_BESR0); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_BESRS0); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_BESR1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_BESRS1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_BEAR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_CFG); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_RTR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_PMIT); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
puts ("\n"
"mb0cf mb1cf mb2cf mb3cf sdtr1 ecccf eccerr\n");
- mtdcr(SDRAM0_CFGADDR,mem_mb0cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_mb1cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_mb2cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_mb3cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_sdtr1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_ecccf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_eccerr); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_B0CR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_B1CR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_B2CR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_B3CR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_TR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_ECCCFG); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_ECCESR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
printf ("\n\n"
"DMA Channels\n"
#elif defined(CONFIG_405EP)
printf ("\n405EP registers; MSR=%08x\n",mfmsr());
printf ("\nUniversal Interrupt Controller Regs\n"
- "uicsr uicer uiccr uicpr uictr uicmsr uicvr uicvcr"
+ "UIC0SR UIC0ER UIC0CR UIC0PR UIC0TR UIC0MSR UIC0VR UIC0VCR"
"\n"
"%08x %08x %08x %08x %08x %08x %08x %08x\n",
- mfdcr(uicsr),
- mfdcr(uicer),
- mfdcr(uiccr),
- mfdcr(uicpr),
- mfdcr(uictr),
- mfdcr(uicmsr),
- mfdcr(uicvr),
- mfdcr(uicvcr));
+ mfdcr(UIC0SR),
+ mfdcr(UIC0ER),
+ mfdcr(UIC0CR),
+ mfdcr(UIC0PR),
+ mfdcr(UIC0TR),
+ mfdcr(UIC0MSR),
+ mfdcr(UIC0VR),
+ mfdcr(UIC0VCR));
puts ("\nMemory (SDRAM) Configuration\n"
"mcopt1 rtr pmit mb0cf mb1cf sdtr1\n");
- mtdcr(SDRAM0_CFGADDR,mem_mcopt1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_rtr); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_pmit); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_mb0cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_mb1cf); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
- mtdcr(SDRAM0_CFGADDR,mem_sdtr1); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_CFG); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_RTR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_PMIT); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_B0CR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_B1CR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
+ mtdcr(SDRAM0_CFGADDR,SDRAM0_TR); printf ("%08x ", mfdcr(SDRAM0_CFGDATA));
printf ("\n\n"
"DMA Channels\n"
#include <common.h>
#include <mpc83xx.h>
#include <ioports.h>
-#ifdef CONFIG_USB_EHCI_FSL
#include <asm/io.h>
+#ifdef CONFIG_USB_EHCI_FSL
#include <usb/ehci-fsl.h>
#endif
*/
void cpu_init_f (volatile immap_t * im)
{
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
- /* system performance tweaking */
-
-#ifdef CONFIG_SYS_ACR_PIPE_DEP
- /* Arbiter pipeline depth */
- im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
- (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
+ __be32 acr_mask =
+#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
+ (ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_ACR_RPTCNT
- /* Arbiter repeat count */
- im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
- (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
+#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
+ (ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
#endif
-
+ 0;
+ __be32 acr_val =
+#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
+ (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
+ (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
+#endif
+ 0;
+ __be32 spcr_mask =
+#ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */
+ (SPCR_OPT << SPCR_OPT_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
+ (SPCR_TSECEP << SPCR_TSECEP_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
+ (SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
+ (SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) |
+#endif
+ 0;
+ __be32 spcr_val =
#ifdef CONFIG_SYS_SPCR_OPT
- /* Optimize transactions between CSB and other devices */
- im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
- (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT);
+ (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SPCR_TSECEP
- /* all eTSEC's Emergency priority */
- im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSECEP) |
- (CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT);
+#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
+ (CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SPCR_TSEC1EP
- /* TSEC1 Emergency priority */
- im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC1EP) |
- (CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT);
+#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
+ (CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SPCR_TSEC2EP
- /* TSEC2 Emergency priority */
- im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) |
- (CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT);
+#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
+ (CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_ENCCM
- /* Encryption clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_ENCCM) |
- (CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT);
+ 0;
+ __be32 sccr_mask =
+#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
+ (SCCR_ENCCM << SCCR_ENCCM_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_PCICM
- /* PCI & DMA clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_PCICM) |
- (CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT);
+#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */
+ (SCCR_PCICM << SCCR_PCICM_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_TSECCM
- /* all TSEC's clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_TSECCM) |
- (CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT);
+#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */
+ (SCCR_TSECCM << SCCR_TSECCM_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_TSEC1CM
- /* TSEC1 clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) |
- (CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT);
+#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */
+ (SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_TSEC2CM
- /* TSEC2 clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) |
- (CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT);
+#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */
+ (SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_TSEC1ON
- /* TSEC1 clock switch */
- im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1ON) |
- (CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT);
+#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */
+ (SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_TSEC2ON
- /* TSEC2 clock switch */
- im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2ON) |
- (CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT);
+#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */
+ (SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_USBMPHCM
- /* USB MPH clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_USBMPHCM) |
- (CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT);
+#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */
+ (SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_USBDRCM
- /* USB DR clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_USBDRCM) |
- (CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT);
+#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */
+ (SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) |
#endif
-
-#ifdef CONFIG_SYS_SCCR_SATACM
- /* SATA controller clock mode */
- im->clk.sccr = (im->clk.sccr & ~SCCR_SATACM) |
- (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT);
+#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
+ (SCCR_SATACM << SCCR_SATACM_SHIFT) |
+#endif
+ 0;
+ __be32 sccr_val =
+#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
+ (CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT) |
#endif
+#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */
+ (CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */
+ (CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */
+ (CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */
+ (CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */
+ (CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */
+ (CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */
+ (CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */
+ (CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) |
+#endif
+#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
+ (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) |
+#endif
+ 0;
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
+
+ /* system performance tweaking */
+ clrsetbits_be32(&im->arbiter.acr, acr_mask, acr_val);
+
+ clrsetbits_be32(&im->sysconf.spcr, spcr_mask, spcr_val);
+
+ clrsetbits_be32(&im->clk.sccr, sccr_mask, sccr_val);
/* RSR - Reset Status Register - clear all status (4.6.1.3) */
- gd->reset_status = im->reset.rsr;
- im->reset.rsr = ~(RSR_RES);
+ gd->reset_status = __raw_readl(&im->reset.rsr);
+ __raw_writel(~(RSR_RES), &im->reset.rsr);
/* AER - Arbiter Event Register - store status */
- gd->arbiter_event_attributes = im->arbiter.aeatr;
- gd->arbiter_event_address = im->arbiter.aeadr;
+ gd->arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr);
+ gd->arbiter_event_address = __raw_readl(&im->arbiter.aeadr);
/*
* RMR - Reset Mode Register
* contains checkstop reset enable (4.6.1.4)
*/
- im->reset.rmr = (RMR_CSRE & (1<<RMR_CSRE_SHIFT));
-
- /* LCRR - Clock Ratio Register (10.3.1.16) */
- im->lbus.lcrr = CONFIG_SYS_LCRR;
+ __raw_writel(RMR_CSRE & (1<<RMR_CSRE_SHIFT), &im->reset.rmr);
- /* Enable Time Base & Decrimenter ( so we will have udelay() )*/
- im->sysconf.spcr |= SPCR_TBEN;
+ /* Enable Time Base & Decrementer ( so we will have udelay() )*/
+ setbits_be32(&im->sysconf.spcr, SPCR_TBEN);
/* System General Purpose Register */
#ifdef CONFIG_SYS_SICRH
#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313)
/* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */
- im->sysconf.sicrh = (im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH;
+ __raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH,
+ &im->sysconf.sicrh);
#else
- im->sysconf.sicrh = CONFIG_SYS_SICRH;
+ __raw_writel(CONFIG_SYS_SICRH, &im->sysconf.sicrh);
#endif
#endif
#ifdef CONFIG_SYS_SICRL
- im->sysconf.sicrl = CONFIG_SYS_SICRL;
+ __raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl);
#endif
- /* DDR control driver register */
-#ifdef CONFIG_SYS_DDRCDR
- im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR;
+#ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */
+ __raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr);
#endif
- /* Output buffer impedance register */
-#ifdef CONFIG_SYS_OBIR
- im->sysconf.obir = CONFIG_SYS_OBIR;
+#ifdef CONFIG_SYS_OBIR /* Output buffer impedance register */
+ __raw_writel(CONFIG_SYS_OBIR, &im->sysconf.obir);
#endif
#ifdef CONFIG_QE
/* Wait for clock to stabilize */
do {
- temp = in_be32(&ehci->control);
+ temp = __raw_readl(&ehci->control);
udelay(1000);
} while (!(temp & PHY_CLK_VALID));
#endif
int cpu_init_r (void)
{
+ volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
#ifdef CONFIG_QE
uint qe_base = CONFIG_SYS_IMMR + 0x00100000; /* QE immr base */
+#endif
+ __be32 lcrr_mask =
+#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
+ LCRR_DBYP |
+#endif
+#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */
+ LCRR_EADC |
+#endif
+#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
+ LCRR_CLKDIV |
+#endif
+ 0;
+ __be32 lcrr_val =
+#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
+ CONFIG_SYS_LCRR_DBYP |
+#endif
+#ifdef CONFIG_SYS_LCRR_EADC
+ CONFIG_SYS_LCRR_EADC |
+#endif
+#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
+ CONFIG_SYS_LCRR_CLKDIV |
+#endif
+ 0;
+
+ /* LCRR - Clock Ratio Register (10.3.1.16)
+ * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description
+ */
+ clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val);
+ __raw_readl(&im->lbus.lcrr);
+ isync();
+
+#ifdef CONFIG_QE
qe_init(qe_base);
qe_reset();
#endif
* program all the registers.
* -------------------------------------------------------------------*/
-#define mtsdram0(reg, data) mtdcr(SDRAM0_CFGADDR,reg);mtdcr(SDRAM0_CFGDATA,data)
/* disable memcontroller so updates work */
- mtsdram0( mem_mcopt1, 0 );
+ mtsdram(SDRAM0_CFG, 0);
#ifndef CONFIG_405EP /* not on PPC405EP */
- mtsdram0( mem_besra , sdram0_besr0 );
- mtsdram0( mem_besrb , sdram0_besr1 );
- mtsdram0( mem_ecccf , sdram0_ecccfg );
- mtsdram0( mem_eccerr, sdram0_eccesr );
+ mtsdram(SDRAM0_BESR0, sdram0_besr0);
+ mtsdram(SDRAM0_BESR1, sdram0_besr1);
+ mtsdram(SDRAM0_ECCCFG, sdram0_ecccfg);
+ mtsdram(SDRAM0_ECCESR, sdram0_eccesr);
#endif
- mtsdram0( mem_rtr , sdram0_rtr );
- mtsdram0( mem_pmit , sdram0_pmit );
- mtsdram0( mem_mb0cf , sdram0_b0cr );
- mtsdram0( mem_mb1cf , sdram0_b1cr );
+ mtsdram(SDRAM0_RTR, sdram0_rtr);
+ mtsdram(SDRAM0_PMIT, sdram0_pmit);
+ mtsdram(SDRAM0_B0CR, sdram0_b0cr);
+ mtsdram(SDRAM0_B1CR, sdram0_b1cr);
#ifndef CONFIG_405EP /* not on PPC405EP */
- mtsdram0( mem_mb2cf , sdram0_b2cr );
- mtsdram0( mem_mb3cf , sdram0_b3cr );
+ mtsdram(SDRAM0_B2CR, sdram0_b2cr);
+ mtsdram(SDRAM0_B3CR, sdram0_b3cr);
#endif
- mtsdram0( mem_sdtr1 , sdram0_tr );
+ mtsdram(SDRAM0_TR, sdram0_tr);
/* SDRAM have a power on delay, 500 micro should do */
udelay(500);
sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
if (ecc_on)
sdram0_cfg |= SDRAM0_CFG_MEMCHK;
- mtsdram0(mem_mcopt1, sdram0_cfg);
+ mtsdram(SDRAM0_CFG, sdram0_cfg);
return (total_size);
}
/*
* program SDRAM Clock Timing Register (SDRAM0_CLKTR)
*/
- mtsdram(mem_clktr, 0x40000000);
+ mtsdram(SDRAM0_CLKTR, 0x40000000);
/*
* delay to ensure 200 usec has elapsed
/*
* enable the memory controller
*/
- mfsdram(mem_cfg0, cfg0);
- mtsdram(mem_cfg0, cfg0 | SDRAM_CFG0_DCEN);
+ mfsdram(SDRAM0_CFG0, cfg0);
+ mtsdram(SDRAM0_CFG0, cfg0 | SDRAM_CFG0_DCEN);
/*
* wait for SDRAM_CFG0_DC_EN to complete
*/
while (1) {
- mfsdram(mem_mcsts, mcsts);
+ mfsdram(SDRAM0_MCSTS, mcsts);
if ((mcsts & SDRAM_MCSTS_MRSC) != 0)
break;
}
/*
* get Memory Controller Options 0 data
*/
- mfsdram(mem_cfg0, cfg0);
+ mfsdram(SDRAM0_CFG0, cfg0);
/*
* clear bits
* Note: DCEN must be enabled after all DDR SDRAM controller
* configuration registers get initialized.
*/
- mtsdram(mem_cfg0, cfg0);
+ mtsdram(SDRAM0_CFG0, cfg0);
}
static void program_cfg1(unsigned long *dimm_populated,
unsigned long num_dimm_banks)
{
unsigned long cfg1;
- mfsdram(mem_cfg1, cfg1);
+ mfsdram(SDRAM0_CFG1, cfg1);
/*
* Self-refresh exit, disable PM
/*
* program Memory Controller Options 1
*/
- mtsdram(mem_cfg1, cfg1);
+ mtsdram(SDRAM0_CFG1, cfg1);
}
static void program_rtr(unsigned long *dimm_populated,
/*
* program Refresh Timer Register (SDRAM0_RTR)
*/
- mtsdram(mem_rtr, sdram_rtr);
+ mtsdram(SDRAM0_RTR, sdram_rtr);
}
static void program_tr0(unsigned long *dimm_populated,
/*
* get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
*/
- mfsdram(mem_tr0, tr0);
+ mfsdram(SDRAM0_TR0, tr0);
tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK |
SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK |
SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK |
}
debug("tr0: %x\n", tr0);
- mtsdram(mem_tr0, tr0);
+ mtsdram(SDRAM0_TR0, tr0);
}
static int short_mem_test(void)
0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}};
for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
- mtdcr(SDRAM0_CFGADDR, mem_b0cr + (bxcr_num << 2));
+ mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (bxcr_num << 2));
if ((mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
/* Bank is enabled */
membase = (unsigned long*)
/*
* get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
*/
- mfsdram(mem_tr1, tr1);
+ mfsdram(SDRAM0_TR1, tr1);
tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK |
SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK);
- mfsdram(mem_tr0, tr0);
+ mfsdram(SDRAM0_TR0, tr0);
if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) &&
(sys_info.freqPLB > 100000000)) {
tr1 |= SDRAM_TR1_RDSS_TR2;
/*
* save CFG0 ECC setting to a temporary variable and turn ECC off
*/
- mfsdram(mem_cfg0, cfg0);
+ mfsdram(SDRAM0_CFG0, cfg0);
ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK;
- mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
+ mtsdram(SDRAM0_CFG0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
/*
* get the delay line calibration register value
*/
- mfsdram(mem_dlycal, dlycal);
+ mfsdram(SDRAM0_DLYCAL, dlycal);
dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
max_pass_length = 0;
/*
* Set the timing reg for the test.
*/
- mtsdram(mem_tr1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
+ mtsdram(SDRAM0_TR1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
if (short_mem_test()) {
if (fail_found == TRUE) {
/*
* restore the orignal ECC setting
*/
- mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
+ mtsdram(SDRAM0_CFG0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
/*
* set the SDRAM TR1 RDCD value
/*
* program SDRAM Timing Register 1 TR1
*/
- mtsdram(mem_tr1, tr1);
+ mtsdram(SDRAM0_TR1, tr1);
}
static unsigned long program_bxcr(unsigned long *dimm_populated,
* Set the BxCR regs. First, wipe out the bank config registers.
*/
for (bx_cr_num = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
- mtdcr(SDRAM0_CFGADDR, mem_b0cr + (bx_cr_num << 2));
+ mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (bx_cr_num << 2));
mtdcr(SDRAM0_CFGDATA, 0x00000000);
bank_parms[bx_cr_num].bank_size_bytes = 0;
}
/* Set the SDRAM0_BxCR regs thanks to sort tables */
for (bx_cr_num = 0, bank_base_addr = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
if (bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes) {
- mtdcr(SDRAM0_CFGADDR, mem_b0cr + (sorted_bank_num[bx_cr_num] << 2));
+ mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (sorted_bank_num[bx_cr_num] << 2));
temp = mfdcr(SDRAM0_CFGDATA) & ~(SDRAM_BXCR_SDBA_MASK | SDRAM_BXCR_SDSZ_MASK |
SDRAM_BXCR_SDAM_MASK | SDRAM_BXCR_SDBE);
temp = temp | (bank_base_addr & SDRAM_BXCR_SDBA_MASK) |
/*
* Disable memory controller.
*/
- mtsdram(mem_mcopt1, 0x00000000);
+ mtsdram(SDRAM0_CFG, 0x00000000);
/*
* Set MB0CF for bank 0.
*/
- mtsdram(mem_mb0cf, mb0cf[i].reg);
- mtsdram(mem_sdtr1, sdtr1);
- mtsdram(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64));
+ mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
+ mtsdram(SDRAM0_TR, sdtr1);
+ mtsdram(SDRAM0_RTR, compute_rtr(speed, mb0cf[i].rows, 64));
udelay(200);
* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
* read/prefetch.
*/
- mtsdram(mem_mcopt1, 0x80800000);
+ mtsdram(SDRAM0_CFG, 0x80800000);
udelay(10000);
* defined (assumes same type as bank 0)
*/
#ifdef CONFIG_SDRAM_BANK1
- mtsdram(mem_mcopt1, 0x00000000);
- mtsdram(mem_mb1cf, mb0cf[i].size | mb0cf[i].reg);
- mtsdram(mem_mcopt1, 0x80800000);
+ mtsdram(SDRAM0_CFG, 0x00000000);
+ mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
+ mtsdram(SDRAM0_CFG, 0x80800000);
udelay(10000);
/*
*/
if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
mb0cf[i].size) {
- mtsdram(mem_mb1cf, 0);
- mtsdram(mem_mcopt1, 0);
+ mtsdram(SDRAM0_B1CR, 0);
+ mtsdram(SDRAM0_CFG, 0);
} else {
/*
* We have two identical banks, so the size
/* go through all possible SDRAM0_TR1[RDCT] values */
for (i=0; i<=0x1ff; i++) {
/* set the current value for TR1 */
- mtsdram(mem_tr1, (0x80800800 | i));
+ mtsdram(SDRAM0_TR1, (0x80800800 | i));
/* write values */
for (j=0; j<NUM_TRIES; j++) {
/*
* Disable memory controller.
*/
- mtsdram(mem_cfg0, 0x00000000);
+ mtsdram(SDRAM0_CFG0, 0x00000000);
/*
* Setup some default
*/
- mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
- mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
- mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
- mtsdram(mem_wddctr, CONFIG_SYS_SDRAM0_WDDCTR);
- mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+ mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */
+ mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(SDRAM0_WDDCTR, CONFIG_SYS_SDRAM0_WDDCTR);
+ mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
/*
* Following for CAS Latency = 2.5 @ 133 MHz PLB
*/
- mtsdram(mem_b0cr, mb0cf[i].reg);
- mtsdram(mem_tr0, CONFIG_SYS_SDRAM0_TR0);
- mtsdram(mem_tr1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
- mtsdram(mem_rtr, CONFIG_SYS_SDRAM0_RTR);
- mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM*/
+ mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
+ mtsdram(SDRAM0_TR0, CONFIG_SYS_SDRAM0_TR0);
+ mtsdram(SDRAM0_TR1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
+ mtsdram(SDRAM0_RTR, CONFIG_SYS_SDRAM0_RTR);
+ mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM*/
udelay(400); /* Delay 200 usecs (min) */
/*
* Enable the controller, then wait for DCEN to complete
*/
- mtsdram(mem_cfg0, CONFIG_SYS_SDRAM0_CFG0);
+ mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
udelay(10000);
if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
* Optimize TR1 to current hardware environment
*/
sdram_tr1_set(0x00000000, &tr1_bank1);
- mtsdram(mem_tr1, (tr1_bank1 | 0x80800800));
+ mtsdram(SDRAM0_TR1, (tr1_bank1 | 0x80800800));
/*
* defined (assumes same type as bank 0)
*/
#ifdef CONFIG_SDRAM_BANK1
- mtsdram(mem_cfg0, 0);
- mtsdram(mem_b1cr, mb0cf[i].size | mb0cf[i].reg);
- mtsdram(mem_cfg0, CONFIG_SYS_SDRAM0_CFG0);
+ mtsdram(SDRAM0_CFG0, 0);
+ mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
+ mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
udelay(10000);
/*
*/
if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size)
!= mb0cf[i].size) {
- mtsdram(mem_cfg0, 0);
- mtsdram(mem_b1cr, 0);
- mtsdram(mem_cfg0, CONFIG_SYS_SDRAM0_CFG0);
+ mtsdram(SDRAM0_CFG0, 0);
+ mtsdram(SDRAM0_B1CR, 0);
+ mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
udelay(10000);
} else {
/*
/*
* Read masked interrupt status register to determine interrupt source
*/
- uic_msr = mfdcr(uic0msr);
+ uic_msr = mfdcr(UIC0MSR);
#if (UIC_MAX > 1)
if ((UIC_MASK(VECNUM_UIC1CI) & uic_msr) ||
uic_interrupt(UIC3_DCR_BASE, 96);
#endif
- mtdcr(uic0sr, (uic_msr & UICB0_ALL));
+ mtdcr(UIC0SR, (uic_msr & UICB0_ALL));
if (uic_msr & ~(UICB0_ALL))
uic_interrupt(UIC0_DCR_BASE, 0);
void pic_irq_ack(unsigned int vec)
{
if ((vec >= 0) && (vec < 32))
- mtdcr(uicsr, UIC_MASK(vec));
+ mtdcr(UIC0SR, UIC_MASK(vec));
else if ((vec >= 32) && (vec < 64))
- mtdcr(uic1sr, UIC_MASK(vec));
+ mtdcr(UIC1SR, UIC_MASK(vec));
else if ((vec >= 64) && (vec < 96))
- mtdcr(uic2sr, UIC_MASK(vec));
+ mtdcr(UIC2SR, UIC_MASK(vec));
else if (vec >= 96)
- mtdcr(uic3sr, UIC_MASK(vec));
+ mtdcr(UIC3SR, UIC_MASK(vec));
}
/*
{
if ((vec >= 0) && (vec < 32))
- mtdcr(uicer, mfdcr(uicer) | UIC_MASK(vec));
+ mtdcr(UIC0ER, mfdcr(UIC0ER) | UIC_MASK(vec));
else if ((vec >= 32) && (vec < 64))
- mtdcr(uic1er, mfdcr(uic1er) | UIC_MASK(vec));
+ mtdcr(UIC1ER, mfdcr(UIC1ER) | UIC_MASK(vec));
else if ((vec >= 64) && (vec < 96))
- mtdcr(uic2er, mfdcr(uic2er) | UIC_MASK(vec));
+ mtdcr(UIC2ER, mfdcr(UIC2ER) | UIC_MASK(vec));
else if (vec >= 96)
- mtdcr(uic3er, mfdcr(uic3er) | UIC_MASK(vec));
+ mtdcr(UIC3ER, mfdcr(UIC3ER) | UIC_MASK(vec));
debug("Install interrupt vector %d\n", vec);
}
void pic_irq_disable(unsigned int vec)
{
if ((vec >= 0) && (vec < 32))
- mtdcr(uicer, mfdcr(uicer) & ~UIC_MASK(vec));
+ mtdcr(UIC0ER, mfdcr(UIC0ER) & ~UIC_MASK(vec));
else if ((vec >= 32) && (vec < 64))
- mtdcr(uic1er, mfdcr(uic1er) & ~UIC_MASK(vec));
+ mtdcr(UIC1ER, mfdcr(UIC1ER) & ~UIC_MASK(vec));
else if ((vec >= 64) && (vec < 96))
- mtdcr(uic2er, mfdcr(uic2er) & ~UIC_MASK(vec));
+ mtdcr(UIC2ER, mfdcr(UIC2ER) & ~UIC_MASK(vec));
else if (vec >= 96)
- mtdcr(uic3er, mfdcr(uic3er) & ~UIC_MASK(vec));
+ mtdcr(UIC3ER, mfdcr(UIC3ER) & ~UIC_MASK(vec));
}
--- /dev/null
+Overview:
+=========
+
+The MPC8536E integrates a PowerPC processor core with system logic
+required for imaging, networking, and communications applications.
+
+Boot from NAND:
+===============
+
+The MPC8536E is capable of booting from NAND flash which uses the image
+u-boot-nand.bin. This image contains two parts: a first stage image(also
+call 4K NAND loader and a second stage image. The former is appended to
+the latter to produce u-boot-nand.bin.
+
+The bootup process can be divided into two stages: the first stage will
+configure the L2SRAM, then copy the second stage image to L2SRAM and jump
+to it. The second stage image is to configure all the hardware and boot up
+to U-Boot command line.
+
+The 4K NAND loader's code comes from the corresponding nand_spl directory,
+along with the code twisted by CONFIG_NAND_SPL. The macro CONFIG_NAND_SPL
+is mainly used to shrink the code size to the 4K size limitation.
+
+The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the
+second stage image. It's set in the board config file when boot from NAND
+is selected.
+
+Build and boot steps
+--------------------
+
+1. Building image
+ make MPC8536DS_NAND_config
+ make CROSS_COMPILE=powerpc-none-linux-gnuspe- all
+
+2. Change dip-switch
+ SW2[5-8] = 1011
+ SW9[1-3] = 101
+ Note: 1 stands for 'on', 0 stands for 'off'
+
+3. Flash image
+ tftp 1000000 u-boot-nand.bin
+ nand erase 0 a0000
+ nand write 1000000 0 a0000
+
+Boot from On-chip ROM:
+======================
+
+The MPC8536E is capable of booting from the on-chip ROM - boot from eSDHC
+and boot from eSPI. When power on, the porcessor excutes the ROM code to
+initialize the eSPI/eSDHC controller, and loads the mian U-Boot image from
+the memory device that interfaced to the controller, such as the SDCard or
+SPI EEPROM, to the target memory, e.g. SDRAM or L2SRAM, then boot from it.
+
+The memory device should contain a specific data structure with control word
+and config word at the fixed address. The config word direct the process how
+to config the memory device, and the control word direct the processor where
+to find the image on the memory device, or where copy the main image to. The
+user can use any method to store the data structure to the memory device, only
+if store it on the assigned address.
+
+Build and boot steps
+--------------------
+
+For boot from eSDHC:
+1. Build image
+ make MPC8536DS_SDCARD_config
+ make CROSS_COMPILE=powerpc-none-linux-gnuspe- all
+
+2. Change dip-switch
+ SW2[5-8] = 0111
+ SW3[1] = 0
+ SW8[7] = 0 - The on-board SD/MMC slot is active
+ SW8[7] = 1 - The externel SD/MMC slot is active
+
+3. Put image to SDCard
+ Put the follwing info at the assigned address on the SDCard:
+
+ Offset | Data | Description
+ --------------------------------------------------------
+ | 0x40-0x43 | 0x424F4F54 | BOOT signature |
+ --------------------------------------------------------
+ | 0x48-0x4B | 0x00080000 | u-boot.bin's size |
+ --------------------------------------------------------
+ | 0x50-0x53 | 0x???????? | u-boot.bin's Addr on SDCard |
+ --------------------------------------------------------
+ | 0x58-0x5B | 0xF8F80000 | Target Address |
+ -------------------------------------------------------
+ | 0x60-0x63 | 0xF8FFF000 | Execution Starting Address |
+ --------------------------------------------------------
+ | 0x68-0x6B | 0x6 | Number of Config Addr/Data |
+ --------------------------------------------------------
+ | 0x80-0x83 | 0xFF720100 | Config Addr 1 |
+ | 0x84-0x87 | 0xF8F80000 | Config Data 1 |
+ --------------------------------------------------------
+ | 0x88-0x8b | 0xFF720e44 | Config Addr 2 |
+ | 0x8c-0x8f | 0x0000000C | Config Data 2 |
+ --------------------------------------------------------
+ | 0x90-0x93 | 0xFF720000 | Config Addr 3 |
+ | 0x94-0x97 | 0x80010000 | Config Data 3 |
+ --------------------------------------------------------
+ | 0x98-0x9b | 0xFF72e40e | Config Addr 4 |
+ | 0x9c-0x9f | 0x00000040 | Config Data 4 |
+ --------------------------------------------------------
+ | 0xa0-0xa3 | 0x40000001 | Config Addr 5 |
+ | 0xa4-0xa7 | 0x00000100 | Config Data 5 |
+ --------------------------------------------------------
+ | 0xa8-0xab | 0x80000001 | Config Addr 6 |
+ | 0xac-0xaf | 0x80000001 | Config Data 6 |
+ --------------------------------------------------------
+ | ...... |
+ --------------------------------------------------------
+ | 0x???????? | u-boot.bin |
+ --------------------------------------------------------
+
+ then insert the SDCard to the active slot to boot up.
+
+For boot from eSPI:
+1. Build image
+ make MPC8536DS_SPIFLASH_config
+ make CROSS_COMPILE=powerpc-none-linux-gnuspe- all
+
+2. Change dip-switch
+ SW2[5-8] = 0110
+
+3. Put image to SPI flash
+ Put the info in the above table onto the SPI flash, then
+ boot up.
=>
+Updating U-boot with U-boot:
+============================
+
+Note that versions of u-boot up to and including 2009.08 had u-boot stored
+at 0xfff8_0000 -> 0xffff_ffff (512k). Currently it is being stored from
+0xfffa_0000 -> 0xffff_ffff (384k). If you use an old macro/script to
+update u-boot with u-boot and it uses the old address, you will render
+your board inoperable, and you will require JTAG recovery.
+
+The following steps list how to update with the current address:
+
+ tftp u-boot.bin
+ md 200000 10
+ protect off all
+ erase fffa0000 ffffffff
+ cp.b 200000 fffa0000 60000
+ md fffa0000 10
+ protect on all
+
+The "md" steps in the above are just a precautionary step that allow
+you to confirm the u-boot version that was downloaded, and then confirm
+that it was copied to flash.
+
+
Hardware Reference:
===================
*/
static const struct {
unsigned short divider;
-#ifdef __PPC__
- u8 dfsr;
-#endif
u8 fdr;
} fsl_i2c_speed_map[] = {
-#ifdef __PPC__
- {160, 1, 32}, {192, 1, 33}, {224, 1, 34}, {256, 1, 35},
- {288, 1, 0}, {320, 1, 1}, {352, 6, 1}, {384, 1, 2}, {416, 6, 2},
- {448, 1, 38}, {480, 1, 3}, {512, 1, 39}, {544, 11, 3}, {576, 1, 4},
- {608, 22, 3}, {640, 1, 5}, {672, 32, 3}, {704, 11, 5}, {736, 43, 3},
- {768, 1, 6}, {800, 54, 3}, {832, 11, 6}, {896, 1, 42}, {960, 1, 7},
- {1024, 1, 43}, {1088, 22, 7}, {1152, 1, 8}, {1216, 43, 7}, {1280, 1, 9},
- {1408, 22, 9}, {1536, 1, 10}, {1664, 22, 10}, {1792, 1, 46},
- {1920, 1, 11}, {2048, 1, 47}, {2176, 43, 11}, {2304, 1, 12},
- {2560, 1, 13}, {2816, 43, 13}, {3072, 1, 14}, {3328, 43, 14},
- {3584, 1, 50}, {3840, 1, 15}, {4096, 1, 51}, {4608, 1, 16},
- {5120, 1, 17}, {6144, 1, 18}, {7168, 1, 54}, {7680, 1, 19},
- {8192, 1, 55}, {9216, 1, 20}, {10240, 1, 21}, {12288, 1, 22},
- {14336, 1, 58}, {15360, 1, 23}, {16384, 1, 59}, {18432, 1, 24},
- {20480, 1, 25}, {24576, 1, 26}, {28672, 1, 62}, {30720, 1, 27},
- {32768, 1, 63}, {36864, 1, 28}, {40960, 1, 29}, {49152, 1, 30},
- {61440, 1, 31}, {-1, 1, 31}
-#elif defined(__M68K__)
+#ifdef __M68K__
{20, 32}, {22, 33}, {24, 34}, {26, 35},
{28, 0}, {28, 36}, {30, 1}, {32, 37},
{34, 2}, {36, 38}, {40, 3}, {40, 39},
unsigned int i2c_clk, unsigned int speed)
{
unsigned short divider = min(i2c_clk / speed, (unsigned short) -1);
- unsigned int i;
/*
* We want to choose an FDR/DFSR that generates an I2C bus speed that
* want the first divider that is equal to or greater than the
* calculated divider.
*/
+#ifdef __PPC__
+ u8 dfsr, fdr = 0x31; /* Default if no FDR found */
+ /* a, b and dfsr matches identifiers A,B and C respectively in AN2919 */
+ unsigned short a, b, ga, gb;
+ unsigned long c_div, est_div;
+
+#ifdef CONFIG_FSL_I2C_CUSTOM_DFSR
+ dfsr = CONFIG_FSL_I2C_CUSTOM_DFSR;
+#else
+ /* Condition 1: dfsr <= 50/T */
+ dfsr = (5 * (i2c_clk / 1000)) / 100000;
+#endif
+#ifdef CONFIG_FSL_I2C_CUSTOM_FDR
+ fdr = CONFIG_FSL_I2C_CUSTOM_FDR;
+ speed = i2c_clk / divider; /* Fake something */
+#else
+ debug("Requested speed:%d, i2c_clk:%d\n", speed, i2c_clk);
+ if (!dfsr)
+ dfsr = 1;
+
+ est_div = ~0;
+ for (ga = 0x4, a = 10; a <= 30; ga++, a += 2) {
+ for (gb = 0; gb < 8; gb++) {
+ b = 16 << gb;
+ c_div = b * (a + ((3*dfsr)/b)*2);
+ if ((c_div > divider) && (c_div < est_div)) {
+ unsigned short bin_gb, bin_ga;
+
+ est_div = c_div;
+ bin_gb = gb << 2;
+ bin_ga = (ga & 0x3) | ((ga & 0x4) << 3);
+ fdr = bin_gb | bin_ga;
+ speed = i2c_clk / est_div;
+ debug("FDR:0x%.2x, div:%ld, ga:0x%x, gb:0x%x, "
+ "a:%d, b:%d, speed:%d\n",
+ fdr, est_div, ga, gb, a, b, speed);
+ /* Condition 2 not accounted for */
+ debug("Tr <= %d ns\n",
+ (b - 3 * dfsr) * 1000000 /
+ (i2c_clk / 1000));
+ }
+ }
+ if (a == 20)
+ a += 2;
+ if (a == 24)
+ a += 4;
+ }
+ debug("divider:%d, est_div:%ld, DFSR:%d\n", divider, est_div, dfsr);
+ debug("FDR:0x%.2x, speed:%d\n", fdr, speed);
+#endif
+ writeb(dfsr, &dev->dfsrr); /* set default filter */
+ writeb(fdr, &dev->fdr); /* set bus speed */
+#else
+ unsigned int i;
for (i = 0; i < ARRAY_SIZE(fsl_i2c_speed_map); i++)
if (fsl_i2c_speed_map[i].divider >= divider) {
u8 fdr;
-#ifdef __PPC__
- u8 dfsr;
- dfsr = fsl_i2c_speed_map[i].dfsr;
-#endif
+
fdr = fsl_i2c_speed_map[i].fdr;
speed = i2c_clk / fsl_i2c_speed_map[i].divider;
writeb(fdr, &dev->fdr); /* set bus speed */
-#ifdef __PPC__
- writeb(dfsr, &dev->dfsrr); /* set default filter */
-#endif
+
break;
}
-
+#endif
return speed;
}
#endif
}
-static __inline__ int
+static int
i2c_wait4bus(void)
{
unsigned long long timeval = get_ticks();
csr = readb(&i2c_dev[i2c_bus_num]->sr);
if (!(csr & I2C_SR_MIF))
continue;
+ /* Read again to allow register to stabilise */
+ csr = readb(&i2c_dev[i2c_bus_num]->sr);
writeb(0x0, &i2c_dev[i2c_bus_num]->sr);
{
int i;
- writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
- &i2c_dev[i2c_bus_num]->cr);
-
for (i = 0; i < length; i++) {
writeb(data[i], &i2c_dev[i2c_bus_num]->dr);
writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK,
&i2c_dev[i2c_bus_num]->cr);
- /* Generate stop on last byte */
+ /* Do not generate stop on last byte */
if (i == length - 1)
- writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr);
+ writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
+ &i2c_dev[i2c_bus_num]->cr);
data[i] = readb(&i2c_dev[i2c_bus_num]->dr);
}
writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+ if (i2c_wait4bus()) /* Wait until STOP */
+ debug("i2c_read: wait4bus timed out\n");
+
if (i == length)
return 0;
}
writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+ if (i2c_wait4bus()) /* Wait until STOP */
+ debug("i2c_write: wait4bus timed out\n");
if (i == length)
return 0;
return;
}
+#ifndef CONFIG_NAND_SPL
static int get_law_entry(u8 i, struct law_entry *e)
{
volatile ccsr_local_t *ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR);
return 1;
}
+#endif
#else
void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
{
return;
}
+#ifndef CONFIG_NAND_SPL
static int get_law_entry(u8 i, struct law_entry *e)
{
volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08);
return 1;
}
#endif
+#endif
int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
{
},
#endif
};
-#endif
static void nand_davinci_4bit_enable_hwecc(struct mtd_info *mtd, int mode)
{
static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
- struct nand_chip *this = mtd->priv;
unsigned short ecc_10bit[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
int i;
unsigned int hw_4ecc[4] = { 0, 0, 0, 0 }, iserror = 0;
return numerrors;
}
+#endif /* CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST */
static int nand_davinci_dev_ready(struct mtd_info *mtd)
{
#include "common.h"
#include "qe.h"
+#include "asm/immap_qe.h"
/* Fast or Giga ethernet
*/
#ifndef __UEC_H__
#define __UEC_H__
+#include "qe.h"
+#include "uccf.h"
+
#define MAX_TX_THREADS 8
#define MAX_RX_THREADS 8
#define MAX_TX_QUEUES 8
ENET_1000_RGMII,
ENET_1000_RGMII_ID,
ENET_1000_RGMII_RXID,
+ ENET_1000_RGMII_TXID,
ENET_1000_TBI,
ENET_1000_RTBI,
ENET_1000_SGMII
{
struct eth_device *edev = mii_info->dev;
uec_private_t *uec = edev->priv;
+ enum enet_interface iface = uec->uec_info->enet_interface;
- if (uec->uec_info->enet_interface == ENET_1000_RGMII_ID) {
+ if (iface == ENET_1000_RGMII_ID ||
+ iface == ENET_1000_RGMII_RXID ||
+ iface == ENET_1000_RGMII_TXID) {
int temp;
temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR);
- temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+ if (iface == ENET_1000_RGMII_ID) {
+ temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
+ } else if (iface == ENET_1000_RGMII_RXID) {
+ temp &= ~MII_M1111_TX_DELAY;
+ temp |= MII_M1111_RX_DELAY;
+ } else if (iface == ENET_1000_RGMII_TXID) {
+ temp &= ~MII_M1111_RX_DELAY;
+ temp |= MII_M1111_TX_DELAY;
+ }
phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR);
continue;
}
/* Relative to cur dir */
- sprintf(buf, "%s%s",
+ sprintf(buf, "%s/%s",
link_name, next == NULL ? "" : next);
memcpy(symlinkpath, buf, sizeof(buf));
next = name = symlinkpath;
#include <asm/fsl_lbc.h>
typedef struct ccsr_local {
- u32 ccsrbarh; /* 0x0 - Control Configuration Status Registers Base Address Register High */
- u32 ccsrbarl; /* 0x4 - Control Configuration Status Registers Base Address Register Low */
- u32 ccsrar; /* 0x8 - Configuration, Control, and Status Attribute Register */
+ u32 ccsrbarh; /* CCSR Base Addr High */
+ u32 ccsrbarl; /* CCSR Base Addr Low */
+ u32 ccsrar; /* CCSR Attr */
#define CCSRAR_C 0x80000000 /* Commit */
u8 res1[4];
- u32 altcbarh; /* 0x10 - Alternate Configuration Base Address Register High */
- u32 altcbarl; /* 0x14 - Alternate Configuration Base Address Register Low */
- u32 altcar; /* 0x18 - Alternate Configuration Attribute Register */
+ u32 altcbarh; /* Alternate Configuration Base Addr High */
+ u32 altcbarl; /* Alternate Configuration Base Addr Low */
+ u32 altcar; /* Alternate Configuration Attr */
u8 res2[4];
- u32 bstrh; /* 0x20 - Boot space translation register high */
- u32 bstrl; /* 0x24 - Boot space translation register Low */
- u32 bstrar; /* 0x28 - Boot space translation attributes register */
+ u32 bstrh; /* Boot space translation high */
+ u32 bstrl; /* Boot space translation Low */
+ u32 bstrar; /* Boot space translation attributes */
u8 res3[0xbd4];
struct {
- u32 lawbarh; /* 0xc00 + n * 0x10 - LAW0 base address register high */
- u32 lawbarl; /* 0xc04 + n * 0x10 - LAW0 base address register low */
- u32 lawar; /* 0xc08 + n * 0x10 - LAW0 attributes register */
+ u32 lawbarh; /* LAWn base addr high */
+ u32 lawbarl; /* LAWn base addr low */
+ u32 lawar; /* LAWn attributes */
u8 res4[4];
} law[32];
u8 res35[0x204];
} ccsr_local_t;
-/*
- * Local-Access Registers and ECM Registers(0x0000-0x2000)
- */
+/* Local-Access Registers & ECM Registers */
typedef struct ccsr_local_ecm {
- uint ccsrbar; /* 0x0 - Control Configuration Status Registers Base Address Register */
- char res1[4];
- uint altcbar; /* 0x8 - Alternate Configuration Base Address Register */
- char res2[4];
- uint altcar; /* 0x10 - Alternate Configuration Attribute Register */
- char res3[12];
- uint bptr; /* 0x20 - Boot Page Translation Register */
- char res4[3044];
- uint lawbar0; /* 0xc08 - Local Access Window 0 Base Address Register */
- char res5[4];
- uint lawar0; /* 0xc10 - Local Access Window 0 Attributes Register */
- char res6[20];
- uint lawbar1; /* 0xc28 - Local Access Window 1 Base Address Register */
- char res7[4];
- uint lawar1; /* 0xc30 - Local Access Window 1 Attributes Register */
- char res8[20];
- uint lawbar2; /* 0xc48 - Local Access Window 2 Base Address Register */
- char res9[4];
- uint lawar2; /* 0xc50 - Local Access Window 2 Attributes Register */
- char res10[20];
- uint lawbar3; /* 0xc68 - Local Access Window 3 Base Address Register */
- char res11[4];
- uint lawar3; /* 0xc70 - Local Access Window 3 Attributes Register */
- char res12[20];
- uint lawbar4; /* 0xc88 - Local Access Window 4 Base Address Register */
- char res13[4];
- uint lawar4; /* 0xc90 - Local Access Window 4 Attributes Register */
- char res14[20];
- uint lawbar5; /* 0xca8 - Local Access Window 5 Base Address Register */
- char res15[4];
- uint lawar5; /* 0xcb0 - Local Access Window 5 Attributes Register */
- char res16[20];
- uint lawbar6; /* 0xcc8 - Local Access Window 6 Base Address Register */
- char res17[4];
- uint lawar6; /* 0xcd0 - Local Access Window 6 Attributes Register */
- char res18[20];
- uint lawbar7; /* 0xce8 - Local Access Window 7 Base Address Register */
- char res19[4];
- uint lawar7; /* 0xcf0 - Local Access Window 7 Attributes Register */
- char res19_8a[20];
- uint lawbar8; /* 0xd08 - Local Access Window 8 Base Address Register */
- char res19_8b[4];
- uint lawar8; /* 0xd10 - Local Access Window 8 Attributes Register */
- char res19_9a[20];
- uint lawbar9; /* 0xd28 - Local Access Window 9 Base Address Register */
- char res19_9b[4];
- uint lawar9; /* 0xd30 - Local Access Window 9 Attributes Register */
- char res19_10a[20];
- uint lawbar10; /* 0xd48 - Local Access Window 10 Base Address Register */
- char res19_10b[4];
- uint lawar10; /* 0xd50 - Local Access Window 10 Attributes Register */
- char res19_11a[20];
- uint lawbar11; /* 0xd68 - Local Access Window 11 Base Address Register */
- char res19_11b[4];
- uint lawar11; /* 0xd70 - Local Access Window 11 Attributes Register */
- char res20[652];
- uint eebacr; /* 0x1000 - ECM CCB Address Configuration Register */
- char res21[12];
- uint eebpcr; /* 0x1010 - ECM CCB Port Configuration Register */
- char res22[3564];
- uint eedr; /* 0x1e00 - ECM Error Detect Register */
- char res23[4];
- uint eeer; /* 0x1e08 - ECM Error Enable Register */
- uint eeatr; /* 0x1e0c - ECM Error Attributes Capture Register */
- uint eeadr; /* 0x1e10 - ECM Error Address Capture Register */
- char res24[492];
+ u32 ccsrbar; /* CCSR Base Addr */
+ u8 res1[4];
+ u32 altcbar; /* Alternate Configuration Base Addr */
+ u8 res2[4];
+ u32 altcar; /* Alternate Configuration Attr */
+ u8 res3[12];
+ u32 bptr; /* Boot Page Translation */
+ u8 res4[3044];
+ u32 lawbar0; /* Local Access Window 0 Base Addr */
+ u8 res5[4];
+ u32 lawar0; /* Local Access Window 0 Attrs */
+ u8 res6[20];
+ u32 lawbar1; /* Local Access Window 1 Base Addr */
+ u8 res7[4];
+ u32 lawar1; /* Local Access Window 1 Attrs */
+ u8 res8[20];
+ u32 lawbar2; /* Local Access Window 2 Base Addr */
+ u8 res9[4];
+ u32 lawar2; /* Local Access Window 2 Attrs */
+ u8 res10[20];
+ u32 lawbar3; /* Local Access Window 3 Base Addr */
+ u8 res11[4];
+ u32 lawar3; /* Local Access Window 3 Attrs */
+ u8 res12[20];
+ u32 lawbar4; /* Local Access Window 4 Base Addr */
+ u8 res13[4];
+ u32 lawar4; /* Local Access Window 4 Attrs */
+ u8 res14[20];
+ u32 lawbar5; /* Local Access Window 5 Base Addr */
+ u8 res15[4];
+ u32 lawar5; /* Local Access Window 5 Attrs */
+ u8 res16[20];
+ u32 lawbar6; /* Local Access Window 6 Base Addr */
+ u8 res17[4];
+ u32 lawar6; /* Local Access Window 6 Attrs */
+ u8 res18[20];
+ u32 lawbar7; /* Local Access Window 7 Base Addr */
+ u8 res19[4];
+ u32 lawar7; /* Local Access Window 7 Attrs */
+ u8 res19_8a[20];
+ u32 lawbar8; /* Local Access Window 8 Base Addr */
+ u8 res19_8b[4];
+ u32 lawar8; /* Local Access Window 8 Attrs */
+ u8 res19_9a[20];
+ u32 lawbar9; /* Local Access Window 9 Base Addr */
+ u8 res19_9b[4];
+ u32 lawar9; /* Local Access Window 9 Attrs */
+ u8 res19_10a[20];
+ u32 lawbar10; /* Local Access Window 10 Base Addr */
+ u8 res19_10b[4];
+ u32 lawar10; /* Local Access Window 10 Attrs */
+ u8 res19_11a[20];
+ u32 lawbar11; /* Local Access Window 11 Base Addr */
+ u8 res19_11b[4];
+ u32 lawar11; /* Local Access Window 11 Attrs */
+ u8 res20[652];
+ u32 eebacr; /* ECM CCB Addr Configuration */
+ u8 res21[12];
+ u32 eebpcr; /* ECM CCB Port Configuration */
+ u8 res22[3564];
+ u32 eedr; /* ECM Error Detect */
+ u8 res23[4];
+ u32 eeer; /* ECM Error Enable */
+ u32 eeatr; /* ECM Error Attrs Capture */
+ u32 eeadr; /* ECM Error Addr Capture */
+ u8 res24[492];
} ccsr_local_ecm_t;
-/*
- * DDR memory controller registers(0x2000-0x3000)
- */
+/* DDR memory controller registers */
typedef struct ccsr_ddr {
- uint cs0_bnds; /* 0x2000 - DDR Chip Select 0 Memory Bounds */
- char res1[4];
- uint cs1_bnds; /* 0x2008 - DDR Chip Select 1 Memory Bounds */
- char res2[4];
- uint cs2_bnds; /* 0x2010 - DDR Chip Select 2 Memory Bounds */
- char res3[4];
- uint cs3_bnds; /* 0x2018 - DDR Chip Select 3 Memory Bounds */
- char res4[100];
- uint cs0_config; /* 0x2080 - DDR Chip Select Configuration */
- uint cs1_config; /* 0x2084 - DDR Chip Select Configuration */
- uint cs2_config; /* 0x2088 - DDR Chip Select Configuration */
- uint cs3_config; /* 0x208c - DDR Chip Select Configuration */
- char res4a[48];
- uint cs0_config_2; /* 0x20c0 - DDR Chip Select Configuration 2 */
- uint cs1_config_2; /* 0x20c4 - DDR Chip Select Configuration 2 */
- uint cs2_config_2; /* 0x20c8 - DDR Chip Select Configuration 2 */
- uint cs3_config_2; /* 0x20cc - DDR Chip Select Configuration 2 */
- char res5[48];
- uint timing_cfg_3; /* 0x2100 - DDR SDRAM Timing Configuration Register 3 */
- uint timing_cfg_0; /* 0x2104 - DDR SDRAM Timing Configuration Register 0 */
- uint timing_cfg_1; /* 0x2108 - DDR SDRAM Timing Configuration Register 1 */
- uint timing_cfg_2; /* 0x210c - DDR SDRAM Timing Configuration Register 2 */
- uint sdram_cfg; /* 0x2110 - DDR SDRAM Control Configuration */
- uint sdram_cfg_2; /* 0x2114 - DDR SDRAM Control Configuration 2 */
- uint sdram_mode; /* 0x2118 - DDR SDRAM Mode Configuration */
- uint sdram_mode_2; /* 0x211c - DDR SDRAM Mode Configuration 2*/
- uint sdram_md_cntl; /* 0x2120 - DDR SDRAM Mode Control */
- uint sdram_interval; /* 0x2124 - DDR SDRAM Interval Configuration */
- uint sdram_data_init; /* 0x2128 - DDR SDRAM Data initialization */
- char res6[4];
- uint sdram_clk_cntl; /* 0x2130 - DDR SDRAM Clock Control */
- char res7[20];
- uint init_addr; /* 0x2148 - DDR training initialization address */
- uint init_ext_addr; /* 0x214C - DDR training initialization extended address */
- char res8_1[16];
- uint timing_cfg_4; /* 0x2160 - DDR SDRAM Timing Configuration Register 4 */
- uint timing_cfg_5; /* 0x2164 - DDR SDRAM Timing Configuration Register 5 */
- char reg8_1a[8];
- uint ddr_zq_cntl; /* 0x2170 - DDR ZQ calibration control*/
- uint ddr_wrlvl_cntl; /* 0x2174 - DDR write leveling control*/
- char reg8_1aa[4];
- uint ddr_sr_cntr; /* 0x217C - DDR self refresh counter */
- uint ddr_sdram_rcw_1; /* 0x2180 - DDR Register Control Words 1 */
- uint ddr_sdram_rcw_2; /* 0x2184 - DDR Register Control Words 2 */
- char res8_1b[2456];
- uint ddr_dsr1; /* 0x2B20 - DDR Debug Status Register 1 */
- uint ddr_dsr2; /* 0x2B24 - DDR Debug Status Register 2 */
- uint ddr_cdr1; /* 0x2B28 - DDR Control Driver Register 1 */
- uint ddr_cdr2; /* 0x2B2C - DDR Control Driver Register 2 */
- char res8_1c[200];
- uint ip_rev1; /* 0x2BF8 - DDR IP Block Revision 1 */
- uint ip_rev2; /* 0x2BFC - DDR IP Block Revision 2 */
- char res8_2[512];
- uint data_err_inject_hi; /* 0x2e00 - DDR Memory Data Path Error Injection Mask High */
- uint data_err_inject_lo; /* 0x2e04 - DDR Memory Data Path Error Injection Mask Low */
- uint ecc_err_inject; /* 0x2e08 - DDR Memory Data Path Error Injection Mask ECC */
- char res9[20];
- uint capture_data_hi; /* 0x2e20 - DDR Memory Data Path Read Capture High */
- uint capture_data_lo; /* 0x2e24 - DDR Memory Data Path Read Capture Low */
- uint capture_ecc; /* 0x2e28 - DDR Memory Data Path Read Capture ECC */
- char res10[20];
- uint err_detect; /* 0x2e40 - DDR Memory Error Detect */
- uint err_disable; /* 0x2e44 - DDR Memory Error Disable */
- uint err_int_en; /* 0x2e48 - DDR */
- uint capture_attributes; /* 0x2e4c - DDR Memory Error Attributes Capture */
- uint capture_address; /* 0x2e50 - DDR Memory Error Address Capture */
- uint capture_ext_address; /* 0x2e54 - DDR Memory Error Extended Address Capture */
- uint err_sbe; /* 0x2e58 - DDR Memory Single-Bit ECC Error Management */
- char res11[164];
- uint debug_1; /* 0x2f00 */
- uint debug_2;
- uint debug_3;
- uint debug_4;
- uint debug_5;
- uint debug_6;
- uint debug_7;
- uint debug_8;
- uint debug_9;
- uint debug_10;
- uint debug_11;
- uint debug_12;
- uint debug_13; /* +0xF30 */
- uint debug_14;
- uint debug_15;
- uint debug_16;
- uint debug_17;
- uint debug_18; /* +0xF44 */
- char res12[184];
+ u32 cs0_bnds; /* Chip Select 0 Memory Bounds */
+ u8 res1[4];
+ u32 cs1_bnds; /* Chip Select 1 Memory Bounds */
+ u8 res2[4];
+ u32 cs2_bnds; /* Chip Select 2 Memory Bounds */
+ u8 res3[4];
+ u32 cs3_bnds; /* Chip Select 3 Memory Bounds */
+ u8 res4[100];
+ u32 cs0_config; /* Chip Select Configuration */
+ u32 cs1_config; /* Chip Select Configuration */
+ u32 cs2_config; /* Chip Select Configuration */
+ u32 cs3_config; /* Chip Select Configuration */
+ u8 res4a[48];
+ u32 cs0_config_2; /* Chip Select Configuration 2 */
+ u32 cs1_config_2; /* Chip Select Configuration 2 */
+ u32 cs2_config_2; /* Chip Select Configuration 2 */
+ u32 cs3_config_2; /* Chip Select Configuration 2 */
+ u8 res5[48];
+ u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */
+ u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */
+ u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */
+ u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */
+ u32 sdram_cfg; /* SDRAM Control Configuration */
+ u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */
+ u32 sdram_mode; /* SDRAM Mode Configuration */
+ u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */
+ u32 sdram_md_cntl; /* SDRAM Mode Control */
+ u32 sdram_interval; /* SDRAM Interval Configuration */
+ u32 sdram_data_init; /* SDRAM Data initialization */
+ u8 res6[4];
+ u32 sdram_clk_cntl; /* SDRAM Clock Control */
+ u8 res7[20];
+ u32 init_addr; /* training init addr */
+ u32 init_ext_addr; /* training init extended addr */
+ u8 res8_1[16];
+ u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */
+ u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */
+ u8 reg8_1a[8];
+ u32 ddr_zq_cntl; /* ZQ calibration control*/
+ u32 ddr_wrlvl_cntl; /* write leveling control*/
+ u8 reg8_1aa[4];
+ u32 ddr_sr_cntr; /* self refresh counter */
+ u32 ddr_sdram_rcw_1; /* Control Words 1 */
+ u32 ddr_sdram_rcw_2; /* Control Words 2 */
+ u8 res8_1b[2456];
+ u32 ddr_dsr1; /* Debug Status 1 */
+ u32 ddr_dsr2; /* Debug Status 2 */
+ u32 ddr_cdr1; /* Control Driver 1 */
+ u32 ddr_cdr2; /* Control Driver 2 */
+ u8 res8_1c[200];
+ u32 ip_rev1; /* IP Block Revision 1 */
+ u32 ip_rev2; /* IP Block Revision 2 */
+ u8 res8_2[512];
+ u32 data_err_inject_hi; /* Data Path Err Injection Mask High */
+ u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */
+ u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */
+ u8 res9[20];
+ u32 capture_data_hi; /* Data Path Read Capture High */
+ u32 capture_data_lo; /* Data Path Read Capture Low */
+ u32 capture_ecc; /* Data Path Read Capture ECC */
+ u8 res10[20];
+ u32 err_detect; /* Error Detect */
+ u32 err_disable; /* Error Disable */
+ u32 err_int_en;
+ u32 capture_attributes; /* Error Attrs Capture */
+ u32 capture_address; /* Error Addr Capture */
+ u32 capture_ext_address; /* Error Extended Addr Capture */
+ u32 err_sbe; /* Single-Bit ECC Error Management */
+ u8 res11[164];
+ u32 debug_1;
+ u32 debug_2;
+ u32 debug_3;
+ u32 debug_4;
+ u32 debug_5;
+ u32 debug_6;
+ u32 debug_7;
+ u32 debug_8;
+ u32 debug_9;
+ u32 debug_10;
+ u32 debug_11;
+ u32 debug_12;
+ u32 debug_13;
+ u32 debug_14;
+ u32 debug_15;
+ u32 debug_16;
+ u32 debug_17;
+ u32 debug_18;
+ u8 res12[184];
} ccsr_ddr_t;
-/*
- * I2C Registers(0x3000-0x4000)
- */
+/* I2C Registers */
typedef struct ccsr_i2c {
struct fsl_i2c i2c[1];
u8 res[4096 - 1 * sizeof(struct fsl_i2c)];
|| defined(CONFIG_MPC8541) \
|| defined(CONFIG_MPC8548) \
|| defined(CONFIG_MPC8555)
-/* DUART Registers(0x4000-0x5000) */
+/* DUART Registers */
typedef struct ccsr_duart {
- char res1[1280];
- u_char urbr1_uthr1_udlb1;/* 0x4500 - URBR1, UTHR1, UDLB1 with the same address offset of 0x04500 */
- u_char uier1_udmb1; /* 0x4501 - UIER1, UDMB1 with the same address offset of 0x04501 */
- u_char uiir1_ufcr1_uafr1;/* 0x4502 - UIIR1, UFCR1, UAFR1 with the same address offset of 0x04502 */
- u_char ulcr1; /* 0x4503 - UART1 Line Control Register */
- u_char umcr1; /* 0x4504 - UART1 Modem Control Register */
- u_char ulsr1; /* 0x4505 - UART1 Line Status Register */
- u_char umsr1; /* 0x4506 - UART1 Modem Status Register */
- u_char uscr1; /* 0x4507 - UART1 Scratch Register */
- char res2[8];
- u_char udsr1; /* 0x4510 - UART1 DMA Status Register */
- char res3[239];
- u_char urbr2_uthr2_udlb2;/* 0x4600 - URBR2, UTHR2, UDLB2 with the same address offset of 0x04600 */
- u_char uier2_udmb2; /* 0x4601 - UIER2, UDMB2 with the same address offset of 0x04601 */
- u_char uiir2_ufcr2_uafr2;/* 0x4602 - UIIR2, UFCR2, UAFR2 with the same address offset of 0x04602 */
- u_char ulcr2; /* 0x4603 - UART2 Line Control Register */
- u_char umcr2; /* 0x4604 - UART2 Modem Control Register */
- u_char ulsr2; /* 0x4605 - UART2 Line Status Register */
- u_char umsr2; /* 0x4606 - UART2 Modem Status Register */
- u_char uscr2; /* 0x4607 - UART2 Scratch Register */
- char res4[8];
- u_char udsr2; /* 0x4610 - UART2 DMA Status Register */
- char res5[2543];
+ u8 res1[1280];
+/* URBR1, UTHR1, UDLB1 with the same addr */
+ u8 urbr1_uthr1_udlb1;
+/* UIER1, UDMB1 with the same addr01 */
+ u8 uier1_udmb1;
+/* UIIR1, UFCR1, UAFR1 with the same addr */
+ u8 uiir1_ufcr1_uafr1;
+ u8 ulcr1; /* UART1 Line Control */
+ u8 umcr1; /* UART1 Modem Control */
+ u8 ulsr1; /* UART1 Line Status */
+ u8 umsr1; /* UART1 Modem Status */
+ u8 uscr1; /* UART1 Scratch */
+ u8 res2[8];
+ u8 udsr1; /* UART1 DMA Status */
+ u8 res3[239];
+/* URBR2, UTHR2, UDLB2 with the same addr */
+ u8 urbr2_uthr2_udlb2;
+/* UIER2, UDMB2 with the same addr */
+ u8 uier2_udmb2;
+/* UIIR2, UFCR2, UAFR2 with the same addr */
+ u8 uiir2_ufcr2_uafr2;
+ u8 ulcr2; /* UART2 Line Control */
+ u8 umcr2; /* UART2 Modem Control */
+ u8 ulsr2; /* UART2 Line Status */
+ u8 umsr2; /* UART2 Modem Status */
+ u8 uscr2; /* UART2 Scratch */
+ u8 res4[8];
+ u8 udsr2; /* UART2 DMA Status */
+ u8 res5[2543];
} ccsr_duart_t;
#else /* MPC8560 uses UART on its CPM */
typedef struct ccsr_duart {
- char res[4096];
+ u8 res[4096];
} ccsr_duart_t;
#endif
-/* Local Bus Controller Registers(0x5000-0x6000) */
-/* Omitting OCeaN(0x6000) and Reserved(0x7000) block */
-
+/* Local Bus Controller Registers */
typedef struct ccsr_lbc {
- uint br0; /* 0x5000 - LBC Base Register 0 */
- uint or0; /* 0x5004 - LBC Options Register 0 */
- uint br1; /* 0x5008 - LBC Base Register 1 */
- uint or1; /* 0x500c - LBC Options Register 1 */
- uint br2; /* 0x5010 - LBC Base Register 2 */
- uint or2; /* 0x5014 - LBC Options Register 2 */
- uint br3; /* 0x5018 - LBC Base Register 3 */
- uint or3; /* 0x501c - LBC Options Register 3 */
- uint br4; /* 0x5020 - LBC Base Register 4 */
- uint or4; /* 0x5024 - LBC Options Register 4 */
- uint br5; /* 0x5028 - LBC Base Register 5 */
- uint or5; /* 0x502c - LBC Options Register 5 */
- uint br6; /* 0x5030 - LBC Base Register 6 */
- uint or6; /* 0x5034 - LBC Options Register 6 */
- uint br7; /* 0x5038 - LBC Base Register 7 */
- uint or7; /* 0x503c - LBC Options Register 7 */
- char res1[40];
- uint mar; /* 0x5068 - LBC UPM Address Register */
- char res2[4];
- uint mamr; /* 0x5070 - LBC UPMA Mode Register */
- uint mbmr; /* 0x5074 - LBC UPMB Mode Register */
- uint mcmr; /* 0x5078 - LBC UPMC Mode Register */
- char res3[8];
- uint mrtpr; /* 0x5084 - LBC Memory Refresh Timer Prescaler Register */
- uint mdr; /* 0x5088 - LBC UPM Data Register */
- char res4[8];
- uint lsdmr; /* 0x5094 - LBC SDRAM Mode Register */
- char res5[8];
- uint lurt; /* 0x50a0 - LBC UPM Refresh Timer */
- uint lsrt; /* 0x50a4 - LBC SDRAM Refresh Timer */
- char res6[8];
- uint ltesr; /* 0x50b0 - LBC Transfer Error Status Register */
- uint ltedr; /* 0x50b4 - LBC Transfer Error Disable Register */
- uint lteir; /* 0x50b8 - LBC Transfer Error Interrupt Register */
- uint lteatr; /* 0x50bc - LBC Transfer Error Attributes Register */
- uint ltear; /* 0x50c0 - LBC Transfer Error Address Register */
- char res7[12];
- uint lbcr; /* 0x50d0 - LBC Configuration Register */
- uint lcrr; /* 0x50d4 - LBC Clock Ratio Register */
- char res8[3880];
+ u32 br0; /* LBC Base 0 */
+ u32 or0; /* LBC Options 0 */
+ u32 br1; /* LBC Base 1 */
+ u32 or1; /* LBC Options 1 */
+ u32 br2; /* LBC Base 2 */
+ u32 or2; /* LBC Options 2 */
+ u32 br3; /* LBC Base 3 */
+ u32 or3; /* LBC Options 3 */
+ u32 br4; /* LBC Base 4 */
+ u32 or4; /* LBC Options 4 */
+ u32 br5; /* LBC Base 5 */
+ u32 or5; /* LBC Options 5 */
+ u32 br6; /* LBC Base 6 */
+ u32 or6; /* LBC Options 6 */
+ u32 br7; /* LBC Base 7 */
+ u32 or7; /* LBC Options 7 */
+ u8 res1[40];
+ u32 mar; /* LBC UPM Addr */
+ u8 res2[4];
+ u32 mamr; /* LBC UPMA Mode */
+ u32 mbmr; /* LBC UPMB Mode */
+ u32 mcmr; /* LBC UPMC Mode */
+ u8 res3[8];
+ u32 mrtpr; /* LBC Memory Refresh Timer Prescaler */
+ u32 mdr; /* LBC UPM Data */
+ u8 res4[8];
+ u32 lsdmr; /* LBC SDRAM Mode */
+ u8 res5[8];
+ u32 lurt; /* LBC UPM Refresh Timer */
+ u32 lsrt; /* LBC SDRAM Refresh Timer */
+ u8 res6[8];
+ u32 ltesr; /* LBC Transfer Error Status */
+ u32 ltedr; /* LBC Transfer Error Disable */
+ u32 lteir; /* LBC Transfer Error IRQ */
+ u32 lteatr; /* LBC Transfer Error Attrs */
+ u32 ltear; /* LBC Transfer Error Addr */
+ u8 res7[12];
+ u32 lbcr; /* LBC Configuration */
+ u32 lcrr; /* LBC Clock Ratio */
+ u8 res8[3880];
} ccsr_lbc_t;
-/*
- * eSPI Registers(0x7000-0x8000)
- */
+/* eSPI Registers */
typedef struct ccsr_espi {
- uint mode; /* 0x00 - eSPI mode register */
- uint event; /* 0x04 - eSPI event register */
- uint mask; /* 0x08 - eSPI mask register */
- uint com; /* 0x0c - eSPI command register */
- uint tx; /* 0x10 - eSPI transmit FIFO access register */
- uint rx; /* 0x14 - eSPI receive FIFO access register */
- char res1[8]; /* reserved */
- uint csmode[4]; /* 0x20 - 0x2c: sSPI CS0/1/2/3 mode register */
- char res2[4048]; /* fill up to 0x1000 */
+ u32 mode; /* eSPI mode */
+ u32 event; /* eSPI event */
+ u32 mask; /* eSPI mask */
+ u32 com; /* eSPI command */
+ u32 tx; /* eSPI transmit FIFO access */
+ u32 rx; /* eSPI receive FIFO access */
+ u8 res1[8]; /* reserved */
+ u32 csmode[4]; /* 0x2c: sSPI CS0/1/2/3 mode */
+ u8 res2[4048]; /* fill up to 0x1000 */
} ccsr_espi_t;
-/*
- * PCI Registers(0x8000-0x9000)
- */
+/* PCI Registers */
typedef struct ccsr_pcix {
- uint cfg_addr; /* 0x8000 - PCIX Configuration Address Register */
- uint cfg_data; /* 0x8004 - PCIX Configuration Data Register */
- uint int_ack; /* 0x8008 - PCIX Interrupt Acknowledge Register */
- char res1[3060];
- uint potar0; /* 0x8c00 - PCIX Outbound Transaction Address Register 0 */
- uint potear0; /* 0x8c04 - PCIX Outbound Translation Extended Address Register 0 */
- uint powbar0; /* 0x8c08 - PCIX Outbound Window Base Address Register 0 */
- uint powbear0; /* 0x8c0c - PCIX Outbound Window Base Extended Address Register 0 */
- uint powar0; /* 0x8c10 - PCIX Outbound Window Attributes Register 0 */
- char res2[12];
- uint potar1; /* 0x8c20 - PCIX Outbound Transaction Address Register 1 */
- uint potear1; /* 0x8c24 - PCIX Outbound Translation Extended Address Register 1 */
- uint powbar1; /* 0x8c28 - PCIX Outbound Window Base Address Register 1 */
- uint powbear1; /* 0x8c2c - PCIX Outbound Window Base Extended Address Register 1 */
- uint powar1; /* 0x8c30 - PCIX Outbound Window Attributes Register 1 */
- char res3[12];
- uint potar2; /* 0x8c40 - PCIX Outbound Transaction Address Register 2 */
- uint potear2; /* 0x8c44 - PCIX Outbound Translation Extended Address Register 2 */
- uint powbar2; /* 0x8c48 - PCIX Outbound Window Base Address Register 2 */
- uint powbear2; /* 0x8c4c - PCIX Outbound Window Base Extended Address Register 2 */
- uint powar2; /* 0x8c50 - PCIX Outbound Window Attributes Register 2 */
- char res4[12];
- uint potar3; /* 0x8c60 - PCIX Outbound Transaction Address Register 3 */
- uint potear3; /* 0x8c64 - PCIX Outbound Translation Extended Address Register 3 */
- uint powbar3; /* 0x8c68 - PCIX Outbound Window Base Address Register 3 */
- uint powbear3; /* 0x8c6c - PCIX Outbound Window Base Extended Address Register 3 */
- uint powar3; /* 0x8c70 - PCIX Outbound Window Attributes Register 3 */
- char res5[12];
- uint potar4; /* 0x8c80 - PCIX Outbound Transaction Address Register 4 */
- uint potear4; /* 0x8c84 - PCIX Outbound Translation Extended Address Register 4 */
- uint powbar4; /* 0x8c88 - PCIX Outbound Window Base Address Register 4 */
- uint powbear4; /* 0x8c8c - PCIX Outbound Window Base Extended Address Register 4 */
- uint powar4; /* 0x8c90 - PCIX Outbound Window Attributes Register 4 */
- char res6[268];
- uint pitar3; /* 0x8da0 - PCIX Inbound Translation Address Register 3 */
- uint pitear3; /* 0x8da4 - PCIX Inbound Translation Extended Address Register 3 */
- uint piwbar3; /* 0x8da8 - PCIX Inbound Window Base Address Register 3 */
- uint piwbear3; /* 0x8dac - PCIX Inbound Window Base Extended Address Register 3 */
- uint piwar3; /* 0x8db0 - PCIX Inbound Window Attributes Register 3 */
- char res7[12];
- uint pitar2; /* 0x8dc0 - PCIX Inbound Translation Address Register 2 */
- uint pitear2; /* 0x8dc4 - PCIX Inbound Translation Extended Address Register 2 */
- uint piwbar2; /* 0x8dc8 - PCIX Inbound Window Base Address Register 2 */
- uint piwbear2; /* 0x8dcc - PCIX Inbound Window Base Extended Address Register 2 */
- uint piwar2; /* 0x8dd0 - PCIX Inbound Window Attributes Register 2 */
- char res8[12];
- uint pitar1; /* 0x8de0 - PCIX Inbound Translation Address Register 1 */
- uint pitear1; /* 0x8de4 - PCIX Inbound Translation Extended Address Register 1 */
- uint piwbar1; /* 0x8de8 - PCIX Inbound Window Base Address Register 1 */
- char res9[4];
- uint piwar1; /* 0x8df0 - PCIX Inbound Window Attributes Register 1 */
- char res10[12];
- uint pedr; /* 0x8e00 - PCIX Error Detect Register */
- uint pecdr; /* 0x8e04 - PCIX Error Capture Disable Register */
- uint peer; /* 0x8e08 - PCIX Error Enable Register */
- uint peattrcr; /* 0x8e0c - PCIX Error Attributes Capture Register */
- uint peaddrcr; /* 0x8e10 - PCIX Error Address Capture Register */
- uint peextaddrcr; /* 0x8e14 - PCIX Error Extended Address Capture Register */
- uint pedlcr; /* 0x8e18 - PCIX Error Data Low Capture Register */
- uint pedhcr; /* 0x8e1c - PCIX Error Error Data High Capture Register */
- uint gas_timr; /* 0x8e20 - PCIX Gasket Timer Register */
- char res11[476];
+ u32 cfg_addr; /* PCIX Configuration Addr */
+ u32 cfg_data; /* PCIX Configuration Data */
+ u32 int_ack; /* PCIX IRQ Acknowledge */
+ u8 res1[3060];
+ u32 potar0; /* PCIX Outbound Transaction Addr 0 */
+ u32 potear0; /* PCIX Outbound Translation Extended Addr 0 */
+ u32 powbar0; /* PCIX Outbound Window Base Addr 0 */
+ u32 powbear0; /* PCIX Outbound Window Base Extended Addr 0 */
+ u32 powar0; /* PCIX Outbound Window Attrs 0 */
+ u8 res2[12];
+ u32 potar1; /* PCIX Outbound Transaction Addr 1 */
+ u32 potear1; /* PCIX Outbound Translation Extended Addr 1 */
+ u32 powbar1; /* PCIX Outbound Window Base Addr 1 */
+ u32 powbear1; /* PCIX Outbound Window Base Extended Addr 1 */
+ u32 powar1; /* PCIX Outbound Window Attrs 1 */
+ u8 res3[12];
+ u32 potar2; /* PCIX Outbound Transaction Addr 2 */
+ u32 potear2; /* PCIX Outbound Translation Extended Addr 2 */
+ u32 powbar2; /* PCIX Outbound Window Base Addr 2 */
+ u32 powbear2; /* PCIX Outbound Window Base Extended Addr 2 */
+ u32 powar2; /* PCIX Outbound Window Attrs 2 */
+ u8 res4[12];
+ u32 potar3; /* PCIX Outbound Transaction Addr 3 */
+ u32 potear3; /* PCIX Outbound Translation Extended Addr 3 */
+ u32 powbar3; /* PCIX Outbound Window Base Addr 3 */
+ u32 powbear3; /* PCIX Outbound Window Base Extended Addr 3 */
+ u32 powar3; /* PCIX Outbound Window Attrs 3 */
+ u8 res5[12];
+ u32 potar4; /* PCIX Outbound Transaction Addr 4 */
+ u32 potear4; /* PCIX Outbound Translation Extended Addr 4 */
+ u32 powbar4; /* PCIX Outbound Window Base Addr 4 */
+ u32 powbear4; /* PCIX Outbound Window Base Extended Addr 4 */
+ u32 powar4; /* PCIX Outbound Window Attrs 4 */
+ u8 res6[268];
+ u32 pitar3; /* PCIX Inbound Translation Addr 3 */
+ u32 pitear3; /* PCIX Inbound Translation Extended Addr 3 */
+ u32 piwbar3; /* PCIX Inbound Window Base Addr 3 */
+ u32 piwbear3; /* PCIX Inbound Window Base Extended Addr 3 */
+ u32 piwar3; /* PCIX Inbound Window Attrs 3 */
+ u8 res7[12];
+ u32 pitar2; /* PCIX Inbound Translation Addr 2 */
+ u32 pitear2; /* PCIX Inbound Translation Extended Addr 2 */
+ u32 piwbar2; /* PCIX Inbound Window Base Addr 2 */
+ u32 piwbear2; /* PCIX Inbound Window Base Extended Addr 2 */
+ u32 piwar2; /* PCIX Inbound Window Attrs 2 */
+ u8 res8[12];
+ u32 pitar1; /* PCIX Inbound Translation Addr 1 */
+ u32 pitear1; /* PCIX Inbound Translation Extended Addr 1 */
+ u32 piwbar1; /* PCIX Inbound Window Base Addr 1 */
+ u8 res9[4];
+ u32 piwar1; /* PCIX Inbound Window Attrs 1 */
+ u8 res10[12];
+ u32 pedr; /* PCIX Error Detect */
+ u32 pecdr; /* PCIX Error Capture Disable */
+ u32 peer; /* PCIX Error Enable */
+ u32 peattrcr; /* PCIX Error Attrs Capture */
+ u32 peaddrcr; /* PCIX Error Addr Capture */
+ u32 peextaddrcr; /* PCIX Error Extended Addr Capture */
+ u32 pedlcr; /* PCIX Error Data Low Capture */
+ u32 pedhcr; /* PCIX Error Error Data High Capture */
+ u32 gas_timr; /* PCIX Gasket Timer */
+ u8 res11[476];
} ccsr_pcix_t;
-typedef struct ccsr_gpio {
- uint gpdir;
- uint gpodr;
- uint gpdat;
- uint gpier;
- uint gpimr;
- uint gpicr;
-} ccsr_gpio_t;
-
#define PCIX_COMMAND 0x62
#define POWAR_EN 0x80000000
#define POWAR_IO_READ 0x00080000
#define PIWAR_WRITE_SNOOP 0x00005000
#define PIWAR_MEM_2G 0x0000001e
+typedef struct ccsr_gpio {
+ u32 gpdir;
+ u32 gpodr;
+ u32 gpdat;
+ u32 gpier;
+ u32 gpimr;
+ u32 gpicr;
+} ccsr_gpio_t;
-/*
- * L2 Cache Registers(0x2_0000-0x2_1000)
- */
+/* L2 Cache Registers */
typedef struct ccsr_l2cache {
- uint l2ctl; /* 0x20000 - L2 configuration register 0 */
- char res1[12];
- uint l2cewar0; /* 0x20010 - L2 cache external write address register 0 */
- char res2[4];
- uint l2cewcr0; /* 0x20018 - L2 cache external write control register 0 */
- char res3[4];
- uint l2cewar1; /* 0x20020 - L2 cache external write address register 1 */
- char res4[4];
- uint l2cewcr1; /* 0x20028 - L2 cache external write control register 1 */
- char res5[4];
- uint l2cewar2; /* 0x20030 - L2 cache external write address register 2 */
- char res6[4];
- uint l2cewcr2; /* 0x20038 - L2 cache external write control register 2 */
- char res7[4];
- uint l2cewar3; /* 0x20040 - L2 cache external write address register 3 */
- char res8[4];
- uint l2cewcr3; /* 0x20048 - L2 cache external write control register 3 */
- char res9[180];
- uint l2srbar0; /* 0x20100 - L2 memory-mapped SRAM base address register 0 */
- char res10[4];
- uint l2srbar1; /* 0x20108 - L2 memory-mapped SRAM base address register 1 */
- char res11[3316];
- uint l2errinjhi; /* 0x20e00 - L2 error injection mask high register */
- uint l2errinjlo; /* 0x20e04 - L2 error injection mask low register */
- uint l2errinjctl; /* 0x20e08 - L2 error injection tag/ECC control register */
- char res12[20];
- uint l2captdatahi; /* 0x20e20 - L2 error data high capture register */
- uint l2captdatalo; /* 0x20e24 - L2 error data low capture register */
- uint l2captecc; /* 0x20e28 - L2 error ECC capture register */
- char res13[20];
- uint l2errdet; /* 0x20e40 - L2 error detect register */
- uint l2errdis; /* 0x20e44 - L2 error disable register */
- uint l2errinten; /* 0x20e48 - L2 error interrupt enable register */
- uint l2errattr; /* 0x20e4c - L2 error attributes capture register */
- uint l2erraddr; /* 0x20e50 - L2 error address capture register */
- char res14[4];
- uint l2errctl; /* 0x20e58 - L2 error control register */
- char res15[420];
+ u32 l2ctl; /* L2 configuration 0 */
+ u8 res1[12];
+ u32 l2cewar0; /* L2 cache external write addr 0 */
+ u8 res2[4];
+ u32 l2cewcr0; /* L2 cache external write control 0 */
+ u8 res3[4];
+ u32 l2cewar1; /* L2 cache external write addr 1 */
+ u8 res4[4];
+ u32 l2cewcr1; /* L2 cache external write control 1 */
+ u8 res5[4];
+ u32 l2cewar2; /* L2 cache external write addr 2 */
+ u8 res6[4];
+ u32 l2cewcr2; /* L2 cache external write control 2 */
+ u8 res7[4];
+ u32 l2cewar3; /* L2 cache external write addr 3 */
+ u8 res8[4];
+ u32 l2cewcr3; /* L2 cache external write control 3 */
+ u8 res9[180];
+ u32 l2srbar0; /* L2 memory-mapped SRAM base addr 0 */
+ u8 res10[4];
+ u32 l2srbar1; /* L2 memory-mapped SRAM base addr 1 */
+ u8 res11[3316];
+ u32 l2errinjhi; /* L2 error injection mask high */
+ u32 l2errinjlo; /* L2 error injection mask low */
+ u32 l2errinjctl; /* L2 error injection tag/ECC control */
+ u8 res12[20];
+ u32 l2captdatahi; /* L2 error data high capture */
+ u32 l2captdatalo; /* L2 error data low capture */
+ u32 l2captecc; /* L2 error ECC capture */
+ u8 res13[20];
+ u32 l2errdet; /* L2 error detect */
+ u32 l2errdis; /* L2 error disable */
+ u32 l2errinten; /* L2 error interrupt enable */
+ u32 l2errattr; /* L2 error attributes capture */
+ u32 l2erraddr; /* L2 error addr capture */
+ u8 res14[4];
+ u32 l2errctl; /* L2 error control */
+ u8 res15[420];
} ccsr_l2cache_t;
#define MPC85xx_L2CTL_L2E 0x80000000
#define MPC85xx_L2ERRDIS_MBECC 0x00000008
#define MPC85xx_L2ERRDIS_SBECC 0x00000004
-/*
- * DMA Registers(0x2_1000-0x2_2000)
- */
+/* DMA Registers */
typedef struct ccsr_dma {
- char res1[256];
+ u8 res1[256];
struct fsl_dma dma[4];
- uint dgsr; /* 0x21300 - DMA General Status Register */
- char res2[11516];
+ u32 dgsr; /* DMA General Status */
+ u8 res2[11516];
} ccsr_dma_t;
-/*
- * tsec1 tsec2: 24000-26000
- */
+/* tsec */
typedef struct ccsr_tsec {
- char res1[16];
- uint ievent; /* 0x24010 - Interrupt Event Register */
- uint imask; /* 0x24014 - Interrupt Mask Register */
- uint edis; /* 0x24018 - Error Disabled Register */
- char res2[4];
- uint ecntrl; /* 0x24020 - Ethernet Control Register */
- uint minflr; /* 0x24024 - Minimum Frame Length Register */
- uint ptv; /* 0x24028 - Pause Time Value Register */
- uint dmactrl; /* 0x2402c - DMA Control Register */
- uint tbipa; /* 0x24030 - TBI PHY Address Register */
- char res3[88];
- uint fifo_tx_thr; /* 0x2408c - FIFO transmit threshold register */
- char res4[8];
- uint fifo_tx_starve; /* 0x24098 - FIFO transmit starve register */
- uint fifo_tx_starve_shutoff; /* 0x2409c - FIFO transmit starve shutoff register */
- char res5[96];
- uint tctrl; /* 0x24100 - Transmit Control Register */
- uint tstat; /* 0x24104 - Transmit Status Register */
- char res6[4];
- uint tbdlen; /* 0x2410c - Transmit Buffer Descriptor Data Length Register */
- char res7[16];
- uint ctbptrh; /* 0x24120 - Current Transmit Buffer Descriptor Pointer High Register */
- uint ctbptr; /* 0x24124 - Current Transmit Buffer Descriptor Pointer Register */
- char res8[88];
- uint tbptrh; /* 0x24180 - Transmit Buffer Descriptor Pointer High Register */
- uint tbptr; /* 0x24184 - Transmit Buffer Descriptor Pointer Low Register */
- char res9[120];
- uint tbaseh; /* 0x24200 - Transmit Descriptor Base Address High Register */
- uint tbase; /* 0x24204 - Transmit Descriptor Base Address Register */
- char res10[168];
- uint ostbd; /* 0x242b0 - Out-of-Sequence Transmit Buffer Descriptor Register */
- uint ostbdp; /* 0x242b4 - Out-of-Sequence Transmit Data Buffer Pointer Register */
- uint os32tbdp; /* 0x242b8 - Out-of-Sequence 32 Bytes Transmit Data Buffer Pointer Low Register */
- uint os32iptrh; /* 0x242bc - Out-of-Sequence 32 Bytes Transmit Insert Pointer High Register */
- uint os32iptrl; /* 0x242c0 - Out-of-Sequence 32 Bytes Transmit Insert Pointer Low Register */
- uint os32tbdr; /* 0x242c4 - Out-of-Sequence 32 Bytes Transmit Reserved Register */
- uint os32iil; /* 0x242c8 - Out-of-Sequence 32 Bytes Transmit Insert Index/Length Register */
- char res11[52];
- uint rctrl; /* 0x24300 - Receive Control Register */
- uint rstat; /* 0x24304 - Receive Status Register */
- char res12[4];
- uint rbdlen; /* 0x2430c - RxBD Data Length Register */
- char res13[16];
- uint crbptrh; /* 0x24320 - Current Receive Buffer Descriptor Pointer High */
- uint crbptr; /* 0x24324 - Current Receive Buffer Descriptor Pointer */
- char res14[24];
- uint mrblr; /* 0x24340 - Maximum Receive Buffer Length Register */
- uint mrblr2r3; /* 0x24344 - Maximum Receive Buffer Length R2R3 Register */
- char res15[56];
- uint rbptrh; /* 0x24380 - Receive Buffer Descriptor Pointer High 0 */
- uint rbptr; /* 0x24384 - Receive Buffer Descriptor Pointer */
- uint rbptrh1; /* 0x24388 - Receive Buffer Descriptor Pointer High 1 */
- uint rbptrl1; /* 0x2438c - Receive Buffer Descriptor Pointer Low 1 */
- uint rbptrh2; /* 0x24390 - Receive Buffer Descriptor Pointer High 2 */
- uint rbptrl2; /* 0x24394 - Receive Buffer Descriptor Pointer Low 2 */
- uint rbptrh3; /* 0x24398 - Receive Buffer Descriptor Pointer High 3 */
- uint rbptrl3; /* 0x2439c - Receive Buffer Descriptor Pointer Low 3 */
- char res16[96];
- uint rbaseh; /* 0x24400 - Receive Descriptor Base Address High 0 */
- uint rbase; /* 0x24404 - Receive Descriptor Base Address */
- uint rbaseh1; /* 0x24408 - Receive Descriptor Base Address High 1 */
- uint rbasel1; /* 0x2440c - Receive Descriptor Base Address Low 1 */
- uint rbaseh2; /* 0x24410 - Receive Descriptor Base Address High 2 */
- uint rbasel2; /* 0x24414 - Receive Descriptor Base Address Low 2 */
- uint rbaseh3; /* 0x24418 - Receive Descriptor Base Address High 3 */
- uint rbasel3; /* 0x2441c - Receive Descriptor Base Address Low 3 */
- char res17[224];
- uint maccfg1; /* 0x24500 - MAC Configuration 1 Register */
- uint maccfg2; /* 0x24504 - MAC Configuration 2 Register */
- uint ipgifg; /* 0x24508 - Inter Packet Gap/Inter Frame Gap Register */
- uint hafdup; /* 0x2450c - Half Duplex Register */
- uint maxfrm; /* 0x24510 - Maximum Frame Length Register */
- char res18[12];
- uint miimcfg; /* 0x24520 - MII Management Configuration Register */
- uint miimcom; /* 0x24524 - MII Management Command Register */
- uint miimadd; /* 0x24528 - MII Management Address Register */
- uint miimcon; /* 0x2452c - MII Management Control Register */
- uint miimstat; /* 0x24530 - MII Management Status Register */
- uint miimind; /* 0x24534 - MII Management Indicator Register */
- char res19[4];
- uint ifstat; /* 0x2453c - Interface Status Register */
- uint macstnaddr1; /* 0x24540 - Station Address Part 1 Register */
- uint macstnaddr2; /* 0x24544 - Station Address Part 2 Register */
- char res20[312];
- uint tr64; /* 0x24680 - Transmit and Receive 64-byte Frame Counter */
- uint tr127; /* 0x24684 - Transmit and Receive 65-127 byte Frame Counter */
- uint tr255; /* 0x24688 - Transmit and Receive 128-255 byte Frame Counter */
- uint tr511; /* 0x2468c - Transmit and Receive 256-511 byte Frame Counter */
- uint tr1k; /* 0x24690 - Transmit and Receive 512-1023 byte Frame Counter */
- uint trmax; /* 0x24694 - Transmit and Receive 1024-1518 byte Frame Counter */
- uint trmgv; /* 0x24698 - Transmit and Receive 1519-1522 byte Good VLAN Frame */
- uint rbyt; /* 0x2469c - Receive Byte Counter */
- uint rpkt; /* 0x246a0 - Receive Packet Counter */
- uint rfcs; /* 0x246a4 - Receive FCS Error Counter */
- uint rmca; /* 0x246a8 - Receive Multicast Packet Counter */
- uint rbca; /* 0x246ac - Receive Broadcast Packet Counter */
- uint rxcf; /* 0x246b0 - Receive Control Frame Packet Counter */
- uint rxpf; /* 0x246b4 - Receive Pause Frame Packet Counter */
- uint rxuo; /* 0x246b8 - Receive Unknown OP Code Counter */
- uint raln; /* 0x246bc - Receive Alignment Error Counter */
- uint rflr; /* 0x246c0 - Receive Frame Length Error Counter */
- uint rcde; /* 0x246c4 - Receive Code Error Counter */
- uint rcse; /* 0x246c8 - Receive Carrier Sense Error Counter */
- uint rund; /* 0x246cc - Receive Undersize Packet Counter */
- uint rovr; /* 0x246d0 - Receive Oversize Packet Counter */
- uint rfrg; /* 0x246d4 - Receive Fragments Counter */
- uint rjbr; /* 0x246d8 - Receive Jabber Counter */
- uint rdrp; /* 0x246dc - Receive Drop Counter */
- uint tbyt; /* 0x246e0 - Transmit Byte Counter Counter */
- uint tpkt; /* 0x246e4 - Transmit Packet Counter */
- uint tmca; /* 0x246e8 - Transmit Multicast Packet Counter */
- uint tbca; /* 0x246ec - Transmit Broadcast Packet Counter */
- uint txpf; /* 0x246f0 - Transmit Pause Control Frame Counter */
- uint tdfr; /* 0x246f4 - Transmit Deferral Packet Counter */
- uint tedf; /* 0x246f8 - Transmit Excessive Deferral Packet Counter */
- uint tscl; /* 0x246fc - Transmit Single Collision Packet Counter */
- uint tmcl; /* 0x24700 - Transmit Multiple Collision Packet Counter */
- uint tlcl; /* 0x24704 - Transmit Late Collision Packet Counter */
- uint txcl; /* 0x24708 - Transmit Excessive Collision Packet Counter */
- uint tncl; /* 0x2470c - Transmit Total Collision Counter */
- char res21[4];
- uint tdrp; /* 0x24714 - Transmit Drop Frame Counter */
- uint tjbr; /* 0x24718 - Transmit Jabber Frame Counter */
- uint tfcs; /* 0x2471c - Transmit FCS Error Counter */
- uint txcf; /* 0x24720 - Transmit Control Frame Counter */
- uint tovr; /* 0x24724 - Transmit Oversize Frame Counter */
- uint tund; /* 0x24728 - Transmit Undersize Frame Counter */
- uint tfrg; /* 0x2472c - Transmit Fragments Frame Counter */
- uint car1; /* 0x24730 - Carry Register One */
- uint car2; /* 0x24734 - Carry Register Two */
- uint cam1; /* 0x24738 - Carry Mask Register One */
- uint cam2; /* 0x2473c - Carry Mask Register Two */
- char res22[192];
- uint iaddr0; /* 0x24800 - Indivdual address register 0 */
- uint iaddr1; /* 0x24804 - Indivdual address register 1 */
- uint iaddr2; /* 0x24808 - Indivdual address register 2 */
- uint iaddr3; /* 0x2480c - Indivdual address register 3 */
- uint iaddr4; /* 0x24810 - Indivdual address register 4 */
- uint iaddr5; /* 0x24814 - Indivdual address register 5 */
- uint iaddr6; /* 0x24818 - Indivdual address register 6 */
- uint iaddr7; /* 0x2481c - Indivdual address register 7 */
- char res23[96];
- uint gaddr0; /* 0x24880 - Global address register 0 */
- uint gaddr1; /* 0x24884 - Global address register 1 */
- uint gaddr2; /* 0x24888 - Global address register 2 */
- uint gaddr3; /* 0x2488c - Global address register 3 */
- uint gaddr4; /* 0x24890 - Global address register 4 */
- uint gaddr5; /* 0x24894 - Global address register 5 */
- uint gaddr6; /* 0x24898 - Global address register 6 */
- uint gaddr7; /* 0x2489c - Global address register 7 */
- char res24[96];
- uint pmd0; /* 0x24900 - Pattern Match Data Register */
- char res25[4];
- uint pmask0; /* 0x24908 - Pattern Mask Register */
- char res26[4];
- uint pcntrl0; /* 0x24910 - Pattern Match Control Register */
- char res27[4];
- uint pattrb0; /* 0x24918 - Pattern Match Attributes Register */
- uint pattrbeli0; /* 0x2491c - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd1; /* 0x24920 - Pattern Match Data Register */
- char res28[4];
- uint pmask1; /* 0x24928 - Pattern Mask Register */
- char res29[4];
- uint pcntrl1; /* 0x24930 - Pattern Match Control Register */
- char res30[4];
- uint pattrb1; /* 0x24938 - Pattern Match Attributes Register */
- uint pattrbeli1; /* 0x2493c - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd2; /* 0x24940 - Pattern Match Data Register */
- char res31[4];
- uint pmask2; /* 0x24948 - Pattern Mask Register */
- char res32[4];
- uint pcntrl2; /* 0x24950 - Pattern Match Control Register */
- char res33[4];
- uint pattrb2; /* 0x24958 - Pattern Match Attributes Register */
- uint pattrbeli2; /* 0x2495c - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd3; /* 0x24960 - Pattern Match Data Register */
- char res34[4];
- uint pmask3; /* 0x24968 - Pattern Mask Register */
- char res35[4];
- uint pcntrl3; /* 0x24970 - Pattern Match Control Register */
- char res36[4];
- uint pattrb3; /* 0x24978 - Pattern Match Attributes Register */
- uint pattrbeli3; /* 0x2497c - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd4; /* 0x24980 - Pattern Match Data Register */
- char res37[4];
- uint pmask4; /* 0x24988 - Pattern Mask Register */
- char res38[4];
- uint pcntrl4; /* 0x24990 - Pattern Match Control Register */
- char res39[4];
- uint pattrb4; /* 0x24998 - Pattern Match Attributes Register */
- uint pattrbeli4; /* 0x2499c - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd5; /* 0x249a0 - Pattern Match Data Register */
- char res40[4];
- uint pmask5; /* 0x249a8 - Pattern Mask Register */
- char res41[4];
- uint pcntrl5; /* 0x249b0 - Pattern Match Control Register */
- char res42[4];
- uint pattrb5; /* 0x249b8 - Pattern Match Attributes Register */
- uint pattrbeli5; /* 0x249bc - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd6; /* 0x249c0 - Pattern Match Data Register */
- char res43[4];
- uint pmask6; /* 0x249c8 - Pattern Mask Register */
- char res44[4];
- uint pcntrl6; /* 0x249d0 - Pattern Match Control Register */
- char res45[4];
- uint pattrb6; /* 0x249d8 - Pattern Match Attributes Register */
- uint pattrbeli6; /* 0x249dc - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd7; /* 0x249e0 - Pattern Match Data Register */
- char res46[4];
- uint pmask7; /* 0x249e8 - Pattern Mask Register */
- char res47[4];
- uint pcntrl7; /* 0x249f0 - Pattern Match Control Register */
- char res48[4];
- uint pattrb7; /* 0x249f8 - Pattern Match Attributes Register */
- uint pattrbeli7; /* 0x249fc - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd8; /* 0x24a00 - Pattern Match Data Register */
- char res49[4];
- uint pmask8; /* 0x24a08 - Pattern Mask Register */
- char res50[4];
- uint pcntrl8; /* 0x24a10 - Pattern Match Control Register */
- char res51[4];
- uint pattrb8; /* 0x24a18 - Pattern Match Attributes Register */
- uint pattrbeli8; /* 0x24a1c - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd9; /* 0x24a20 - Pattern Match Data Register */
- char res52[4];
- uint pmask9; /* 0x24a28 - Pattern Mask Register */
- char res53[4];
- uint pcntrl9; /* 0x24a30 - Pattern Match Control Register */
- char res54[4];
- uint pattrb9; /* 0x24a38 - Pattern Match Attributes Register */
- uint pattrbeli9; /* 0x24a3c - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd10; /* 0x24a40 - Pattern Match Data Register */
- char res55[4];
- uint pmask10; /* 0x24a48 - Pattern Mask Register */
- char res56[4];
- uint pcntrl10; /* 0x24a50 - Pattern Match Control Register */
- char res57[4];
- uint pattrb10; /* 0x24a58 - Pattern Match Attributes Register */
- uint pattrbeli10; /* 0x24a5c - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd11; /* 0x24a60 - Pattern Match Data Register */
- char res58[4];
- uint pmask11; /* 0x24a68 - Pattern Mask Register */
- char res59[4];
- uint pcntrl11; /* 0x24a70 - Pattern Match Control Register */
- char res60[4];
- uint pattrb11; /* 0x24a78 - Pattern Match Attributes Register */
- uint pattrbeli11; /* 0x24a7c - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd12; /* 0x24a80 - Pattern Match Data Register */
- char res61[4];
- uint pmask12; /* 0x24a88 - Pattern Mask Register */
- char res62[4];
- uint pcntrl12; /* 0x24a90 - Pattern Match Control Register */
- char res63[4];
- uint pattrb12; /* 0x24a98 - Pattern Match Attributes Register */
- uint pattrbeli12; /* 0x24a9c - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd13; /* 0x24aa0 - Pattern Match Data Register */
- char res64[4];
- uint pmask13; /* 0x24aa8 - Pattern Mask Register */
- char res65[4];
- uint pcntrl13; /* 0x24ab0 - Pattern Match Control Register */
- char res66[4];
- uint pattrb13; /* 0x24ab8 - Pattern Match Attributes Register */
- uint pattrbeli13; /* 0x24abc - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd14; /* 0x24ac0 - Pattern Match Data Register */
- char res67[4];
- uint pmask14; /* 0x24ac8 - Pattern Mask Register */
- char res68[4];
- uint pcntrl14; /* 0x24ad0 - Pattern Match Control Register */
- char res69[4];
- uint pattrb14; /* 0x24ad8 - Pattern Match Attributes Register */
- uint pattrbeli14; /* 0x24adc - Pattern Match Attributes Extract Length and Extract Index Register */
- uint pmd15; /* 0x24ae0 - Pattern Match Data Register */
- char res70[4];
- uint pmask15; /* 0x24ae8 - Pattern Mask Register */
- char res71[4];
- uint pcntrl15; /* 0x24af0 - Pattern Match Control Register */
- char res72[4];
- uint pattrb15; /* 0x24af8 - Pattern Match Attributes Register */
- uint pattrbeli15; /* 0x24afc - Pattern Match Attributes Extract Length and Extract Index Register */
- char res73[248];
- uint attr; /* 0x24bf8 - Attributes Register */
- uint attreli; /* 0x24bfc - Attributes Extract Length and Extract Index Register */
- char res74[1024];
+ u8 res1[16];
+ u32 ievent; /* IRQ Event */
+ u32 imask; /* IRQ Mask */
+ u32 edis; /* Error Disabled */
+ u8 res2[4];
+ u32 ecntrl; /* Ethernet Control */
+ u32 minflr; /* Minimum Frame Len */
+ u32 ptv; /* Pause Time Value */
+ u32 dmactrl; /* DMA Control */
+ u32 tbipa; /* TBI PHY Addr */
+ u8 res3[88];
+ u32 fifo_tx_thr; /* FIFO transmit threshold */
+ u8 res4[8];
+ u32 fifo_tx_starve; /* FIFO transmit starve */
+ u32 fifo_tx_starve_shutoff; /* FIFO transmit starve shutoff */
+ u8 res5[96];
+ u32 tctrl; /* TX Control */
+ u32 tstat; /* TX Status */
+ u8 res6[4];
+ u32 tbdlen; /* TX Buffer Desc Data Len */
+ u8 res7[16];
+ u32 ctbptrh; /* Current TX Buffer Desc Ptr High */
+ u32 ctbptr; /* Current TX Buffer Desc Ptr */
+ u8 res8[88];
+ u32 tbptrh; /* TX Buffer Desc Ptr High */
+ u32 tbptr; /* TX Buffer Desc Ptr Low */
+ u8 res9[120];
+ u32 tbaseh; /* TX Desc Base Addr High */
+ u32 tbase; /* TX Desc Base Addr */
+ u8 res10[168];
+ u32 ostbd; /* Out-of-Sequence(OOS) TX Buffer Desc */
+ u32 ostbdp; /* OOS TX Data Buffer Ptr */
+ u32 os32tbdp; /* OOS 32 Bytes TX Data Buffer Ptr Low */
+ u32 os32iptrh; /* OOS 32 Bytes TX Insert Ptr High */
+ u32 os32iptrl; /* OOS 32 Bytes TX Insert Ptr Low */
+ u32 os32tbdr; /* OOS 32 Bytes TX Reserved */
+ u32 os32iil; /* OOS 32 Bytes TX Insert Idx/Len */
+ u8 res11[52];
+ u32 rctrl; /* RX Control */
+ u32 rstat; /* RX Status */
+ u8 res12[4];
+ u32 rbdlen; /* RxBD Data Len */
+ u8 res13[16];
+ u32 crbptrh; /* Current RX Buffer Desc Ptr High */
+ u32 crbptr; /* Current RX Buffer Desc Ptr */
+ u8 res14[24];
+ u32 mrblr; /* Maximum RX Buffer Len */
+ u32 mrblr2r3; /* Maximum RX Buffer Len R2R3 */
+ u8 res15[56];
+ u32 rbptrh; /* RX Buffer Desc Ptr High 0 */
+ u32 rbptr; /* RX Buffer Desc Ptr */
+ u32 rbptrh1; /* RX Buffer Desc Ptr High 1 */
+ u32 rbptrl1; /* RX Buffer Desc Ptr Low 1 */
+ u32 rbptrh2; /* RX Buffer Desc Ptr High 2 */
+ u32 rbptrl2; /* RX Buffer Desc Ptr Low 2 */
+ u32 rbptrh3; /* RX Buffer Desc Ptr High 3 */
+ u32 rbptrl3; /* RX Buffer Desc Ptr Low 3 */
+ u8 res16[96];
+ u32 rbaseh; /* RX Desc Base Addr High 0 */
+ u32 rbase; /* RX Desc Base Addr */
+ u32 rbaseh1; /* RX Desc Base Addr High 1 */
+ u32 rbasel1; /* RX Desc Base Addr Low 1 */
+ u32 rbaseh2; /* RX Desc Base Addr High 2 */
+ u32 rbasel2; /* RX Desc Base Addr Low 2 */
+ u32 rbaseh3; /* RX Desc Base Addr High 3 */
+ u32 rbasel3; /* RX Desc Base Addr Low 3 */
+ u8 res17[224];
+ u32 maccfg1; /* MAC Configuration 1 */
+ u32 maccfg2; /* MAC Configuration 2 */
+ u32 ipgifg; /* Inter Packet Gap/Inter Frame Gap */
+ u32 hafdup; /* Half Duplex */
+ u32 maxfrm; /* Maximum Frame Len */
+ u8 res18[12];
+ u32 miimcfg; /* MII Management Configuration */
+ u32 miimcom; /* MII Management Cmd */
+ u32 miimadd; /* MII Management Addr */
+ u32 miimcon; /* MII Management Control */
+ u32 miimstat; /* MII Management Status */
+ u32 miimind; /* MII Management Indicator */
+ u8 res19[4];
+ u32 ifstat; /* Interface Status */
+ u32 macstnaddr1; /* Station Addr Part 1 */
+ u32 macstnaddr2; /* Station Addr Part 2 */
+ u8 res20[312];
+ u32 tr64; /* TX & RX 64-byte Frame Counter */
+ u32 tr127; /* TX & RX 65-127 byte Frame Counter */
+ u32 tr255; /* TX & RX 128-255 byte Frame Counter */
+ u32 tr511; /* TX & RX 256-511 byte Frame Counter */
+ u32 tr1k; /* TX & RX 512-1023 byte Frame Counter */
+ u32 trmax; /* TX & RX 1024-1518 byte Frame Counter */
+ u32 trmgv; /* TX & RX 1519-1522 byte Good VLAN Frame */
+ u32 rbyt; /* RX Byte Counter */
+ u32 rpkt; /* RX Packet Counter */
+ u32 rfcs; /* RX FCS Error Counter */
+ u32 rmca; /* RX Multicast Packet Counter */
+ u32 rbca; /* RX Broadcast Packet Counter */
+ u32 rxcf; /* RX Control Frame Packet Counter */
+ u32 rxpf; /* RX Pause Frame Packet Counter */
+ u32 rxuo; /* RX Unknown OP Code Counter */
+ u32 raln; /* RX Alignment Error Counter */
+ u32 rflr; /* RX Frame Len Error Counter */
+ u32 rcde; /* RX Code Error Counter */
+ u32 rcse; /* RX Carrier Sense Error Counter */
+ u32 rund; /* RX Undersize Packet Counter */
+ u32 rovr; /* RX Oversize Packet Counter */
+ u32 rfrg; /* RX Fragments Counter */
+ u32 rjbr; /* RX Jabber Counter */
+ u32 rdrp; /* RX Drop Counter */
+ u32 tbyt; /* TX Byte Counter Counter */
+ u32 tpkt; /* TX Packet Counter */
+ u32 tmca; /* TX Multicast Packet Counter */
+ u32 tbca; /* TX Broadcast Packet Counter */
+ u32 txpf; /* TX Pause Control Frame Counter */
+ u32 tdfr; /* TX Deferral Packet Counter */
+ u32 tedf; /* TX Excessive Deferral Packet Counter */
+ u32 tscl; /* TX Single Collision Packet Counter */
+ u32 tmcl; /* TX Multiple Collision Packet Counter */
+ u32 tlcl; /* TX Late Collision Packet Counter */
+ u32 txcl; /* TX Excessive Collision Packet Counter */
+ u32 tncl; /* TX Total Collision Counter */
+ u8 res21[4];
+ u32 tdrp; /* TX Drop Frame Counter */
+ u32 tjbr; /* TX Jabber Frame Counter */
+ u32 tfcs; /* TX FCS Error Counter */
+ u32 txcf; /* TX Control Frame Counter */
+ u32 tovr; /* TX Oversize Frame Counter */
+ u32 tund; /* TX Undersize Frame Counter */
+ u32 tfrg; /* TX Fragments Frame Counter */
+ u32 car1; /* Carry One */
+ u32 car2; /* Carry Two */
+ u32 cam1; /* Carry Mask One */
+ u32 cam2; /* Carry Mask Two */
+ u8 res22[192];
+ u32 iaddr0; /* Indivdual addr 0 */
+ u32 iaddr1; /* Indivdual addr 1 */
+ u32 iaddr2; /* Indivdual addr 2 */
+ u32 iaddr3; /* Indivdual addr 3 */
+ u32 iaddr4; /* Indivdual addr 4 */
+ u32 iaddr5; /* Indivdual addr 5 */
+ u32 iaddr6; /* Indivdual addr 6 */
+ u32 iaddr7; /* Indivdual addr 7 */
+ u8 res23[96];
+ u32 gaddr0; /* Global addr 0 */
+ u32 gaddr1; /* Global addr 1 */
+ u32 gaddr2; /* Global addr 2 */
+ u32 gaddr3; /* Global addr 3 */
+ u32 gaddr4; /* Global addr 4 */
+ u32 gaddr5; /* Global addr 5 */
+ u32 gaddr6; /* Global addr 6 */
+ u32 gaddr7; /* Global addr 7 */
+ u8 res24[96];
+ u32 pmd0; /* Pattern Match Data */
+ u8 res25[4];
+ u32 pmask0; /* Pattern Mask */
+ u8 res26[4];
+ u32 pcntrl0; /* Pattern Match Control */
+ u8 res27[4];
+ u32 pattrb0; /* Pattern Match Attrs */
+ u32 pattrbeli0; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd1; /* Pattern Match Data */
+ u8 res28[4];
+ u32 pmask1; /* Pattern Mask */
+ u8 res29[4];
+ u32 pcntrl1; /* Pattern Match Control */
+ u8 res30[4];
+ u32 pattrb1; /* Pattern Match Attrs */
+ u32 pattrbeli1; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd2; /* Pattern Match Data */
+ u8 res31[4];
+ u32 pmask2; /* Pattern Mask */
+ u8 res32[4];
+ u32 pcntrl2; /* Pattern Match Control */
+ u8 res33[4];
+ u32 pattrb2; /* Pattern Match Attrs */
+ u32 pattrbeli2; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd3; /* Pattern Match Data */
+ u8 res34[4];
+ u32 pmask3; /* Pattern Mask */
+ u8 res35[4];
+ u32 pcntrl3; /* Pattern Match Control */
+ u8 res36[4];
+ u32 pattrb3; /* Pattern Match Attrs */
+ u32 pattrbeli3; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd4; /* Pattern Match Data */
+ u8 res37[4];
+ u32 pmask4; /* Pattern Mask */
+ u8 res38[4];
+ u32 pcntrl4; /* Pattern Match Control */
+ u8 res39[4];
+ u32 pattrb4; /* Pattern Match Attrs */
+ u32 pattrbeli4; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd5; /* Pattern Match Data */
+ u8 res40[4];
+ u32 pmask5; /* Pattern Mask */
+ u8 res41[4];
+ u32 pcntrl5; /* Pattern Match Control */
+ u8 res42[4];
+ u32 pattrb5; /* Pattern Match Attrs */
+ u32 pattrbeli5; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd6; /* Pattern Match Data */
+ u8 res43[4];
+ u32 pmask6; /* Pattern Mask */
+ u8 res44[4];
+ u32 pcntrl6; /* Pattern Match Control */
+ u8 res45[4];
+ u32 pattrb6; /* Pattern Match Attrs */
+ u32 pattrbeli6; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd7; /* Pattern Match Data */
+ u8 res46[4];
+ u32 pmask7; /* Pattern Mask */
+ u8 res47[4];
+ u32 pcntrl7; /* Pattern Match Control */
+ u8 res48[4];
+ u32 pattrb7; /* Pattern Match Attrs */
+ u32 pattrbeli7; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd8; /* Pattern Match Data */
+ u8 res49[4];
+ u32 pmask8; /* Pattern Mask */
+ u8 res50[4];
+ u32 pcntrl8; /* Pattern Match Control */
+ u8 res51[4];
+ u32 pattrb8; /* Pattern Match Attrs */
+ u32 pattrbeli8; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd9; /* Pattern Match Data */
+ u8 res52[4];
+ u32 pmask9; /* Pattern Mask */
+ u8 res53[4];
+ u32 pcntrl9; /* Pattern Match Control */
+ u8 res54[4];
+ u32 pattrb9; /* Pattern Match Attrs */
+ u32 pattrbeli9; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd10; /* Pattern Match Data */
+ u8 res55[4];
+ u32 pmask10; /* Pattern Mask */
+ u8 res56[4];
+ u32 pcntrl10; /* Pattern Match Control */
+ u8 res57[4];
+ u32 pattrb10; /* Pattern Match Attrs */
+ u32 pattrbeli10; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd11; /* Pattern Match Data */
+ u8 res58[4];
+ u32 pmask11; /* Pattern Mask */
+ u8 res59[4];
+ u32 pcntrl11; /* Pattern Match Control */
+ u8 res60[4];
+ u32 pattrb11; /* Pattern Match Attrs */
+ u32 pattrbeli11; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd12; /* Pattern Match Data */
+ u8 res61[4];
+ u32 pmask12; /* Pattern Mask */
+ u8 res62[4];
+ u32 pcntrl12; /* Pattern Match Control */
+ u8 res63[4];
+ u32 pattrb12; /* Pattern Match Attrs */
+ u32 pattrbeli12; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd13; /* Pattern Match Data */
+ u8 res64[4];
+ u32 pmask13; /* Pattern Mask */
+ u8 res65[4];
+ u32 pcntrl13; /* Pattern Match Control */
+ u8 res66[4];
+ u32 pattrb13; /* Pattern Match Attrs */
+ u32 pattrbeli13; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd14; /* Pattern Match Data */
+ u8 res67[4];
+ u32 pmask14; /* Pattern Mask */
+ u8 res68[4];
+ u32 pcntrl14; /* Pattern Match Control */
+ u8 res69[4];
+ u32 pattrb14; /* Pattern Match Attrs */
+ u32 pattrbeli14; /* Pattern Match Attrs Extract Len & Idx */
+ u32 pmd15; /* Pattern Match Data */
+ u8 res70[4];
+ u32 pmask15; /* Pattern Mask */
+ u8 res71[4];
+ u32 pcntrl15; /* Pattern Match Control */
+ u8 res72[4];
+ u32 pattrb15; /* Pattern Match Attrs */
+ u32 pattrbeli15; /* Pattern Match Attrs Extract Len & Idx */
+ u8 res73[248];
+ u32 attr; /* Attrs */
+ u32 attreli; /* Attrs Extract Len & Idx */
+ u8 res74[1024];
} ccsr_tsec_t;
-/*
- * PIC Registers(0x4_0000-0x8_0000)
- */
+/* PIC Registers */
typedef struct ccsr_pic {
- char res1[64]; /* 0x40000 */
- uint ipidr0; /* 0x40040 - Interprocessor Interrupt Dispatch Register 0 */
- char res2[12];
- uint ipidr1; /* 0x40050 - Interprocessor Interrupt Dispatch Register 1 */
- char res3[12];
- uint ipidr2; /* 0x40060 - Interprocessor Interrupt Dispatch Register 2 */
- char res4[12];
- uint ipidr3; /* 0x40070 - Interprocessor Interrupt Dispatch Register 3 */
- char res5[12];
- uint ctpr; /* 0x40080 - Current Task Priority Register */
- char res6[12];
- uint whoami; /* 0x40090 - Who Am I Register */
- char res7[12];
- uint iack; /* 0x400a0 - Interrupt Acknowledge Register */
- char res8[12];
- uint eoi; /* 0x400b0 - End Of Interrupt Register */
- char res9[3916];
- uint frr; /* 0x41000 - Feature Reporting Register */
- char res10[28];
- uint gcr; /* 0x41020 - Global Configuration Register */
-#define MPC85xx_PICGCR_RST 0x80000000
-#define MPC85xx_PICGCR_M 0x20000000
- char res11[92];
- uint vir; /* 0x41080 - Vendor Identification Register */
- char res12[12];
- uint pir; /* 0x41090 - Processor Initialization Register */
- char res13[12];
- uint ipivpr0; /* 0x410a0 - IPI Vector/Priority Register 0 */
- char res14[12];
- uint ipivpr1; /* 0x410b0 - IPI Vector/Priority Register 1 */
- char res15[12];
- uint ipivpr2; /* 0x410c0 - IPI Vector/Priority Register 2 */
- char res16[12];
- uint ipivpr3; /* 0x410d0 - IPI Vector/Priority Register 3 */
- char res17[12];
- uint svr; /* 0x410e0 - Spurious Vector Register */
- char res18[12];
- uint tfrr; /* 0x410f0 - Timer Frequency Reporting Register */
- char res19[12];
- uint gtccr0; /* 0x41100 - Global Timer Current Count Register 0 */
- char res20[12];
- uint gtbcr0; /* 0x41110 - Global Timer Base Count Register 0 */
- char res21[12];
- uint gtvpr0; /* 0x41120 - Global Timer Vector/Priority Register 0 */
- char res22[12];
- uint gtdr0; /* 0x41130 - Global Timer Destination Register 0 */
- char res23[12];
- uint gtccr1; /* 0x41140 - Global Timer Current Count Register 1 */
- char res24[12];
- uint gtbcr1; /* 0x41150 - Global Timer Base Count Register 1 */
- char res25[12];
- uint gtvpr1; /* 0x41160 - Global Timer Vector/Priority Register 1 */
- char res26[12];
- uint gtdr1; /* 0x41170 - Global Timer Destination Register 1 */
- char res27[12];
- uint gtccr2; /* 0x41180 - Global Timer Current Count Register 2 */
- char res28[12];
- uint gtbcr2; /* 0x41190 - Global Timer Base Count Register 2 */
- char res29[12];
- uint gtvpr2; /* 0x411a0 - Global Timer Vector/Priority Register 2 */
- char res30[12];
- uint gtdr2; /* 0x411b0 - Global Timer Destination Register 2 */
- char res31[12];
- uint gtccr3; /* 0x411c0 - Global Timer Current Count Register 3 */
- char res32[12];
- uint gtbcr3; /* 0x411d0 - Global Timer Base Count Register 3 */
- char res33[12];
- uint gtvpr3; /* 0x411e0 - Global Timer Vector/Priority Register 3 */
- char res34[12];
- uint gtdr3; /* 0x411f0 - Global Timer Destination Register 3 */
- char res35[268];
- uint tcr; /* 0x41300 - Timer Control Register */
- char res36[12];
- uint irqsr0; /* 0x41310 - IRQ_OUT Summary Register 0 */
- char res37[12];
- uint irqsr1; /* 0x41320 - IRQ_OUT Summary Register 1 */
- char res38[12];
- uint cisr0; /* 0x41330 - Critical Interrupt Summary Register 0 */
- char res39[12];
- uint cisr1; /* 0x41340 - Critical Interrupt Summary Register 1 */
- char res40[188];
- uint msgr0; /* 0x41400 - Message Register 0 */
- char res41[12];
- uint msgr1; /* 0x41410 - Message Register 1 */
- char res42[12];
- uint msgr2; /* 0x41420 - Message Register 2 */
- char res43[12];
- uint msgr3; /* 0x41430 - Message Register 3 */
- char res44[204];
- uint mer; /* 0x41500 - Message Enable Register */
- char res45[12];
- uint msr; /* 0x41510 - Message Status Register */
- char res46[60140];
- uint eivpr0; /* 0x50000 - External Interrupt Vector/Priority Register 0 */
- char res47[12];
- uint eidr0; /* 0x50010 - External Interrupt Destination Register 0 */
- char res48[12];
- uint eivpr1; /* 0x50020 - External Interrupt Vector/Priority Register 1 */
- char res49[12];
- uint eidr1; /* 0x50030 - External Interrupt Destination Register 1 */
- char res50[12];
- uint eivpr2; /* 0x50040 - External Interrupt Vector/Priority Register 2 */
- char res51[12];
- uint eidr2; /* 0x50050 - External Interrupt Destination Register 2 */
- char res52[12];
- uint eivpr3; /* 0x50060 - External Interrupt Vector/Priority Register 3 */
- char res53[12];
- uint eidr3; /* 0x50070 - External Interrupt Destination Register 3 */
- char res54[12];
- uint eivpr4; /* 0x50080 - External Interrupt Vector/Priority Register 4 */
- char res55[12];
- uint eidr4; /* 0x50090 - External Interrupt Destination Register 4 */
- char res56[12];
- uint eivpr5; /* 0x500a0 - External Interrupt Vector/Priority Register 5 */
- char res57[12];
- uint eidr5; /* 0x500b0 - External Interrupt Destination Register 5 */
- char res58[12];
- uint eivpr6; /* 0x500c0 - External Interrupt Vector/Priority Register 6 */
- char res59[12];
- uint eidr6; /* 0x500d0 - External Interrupt Destination Register 6 */
- char res60[12];
- uint eivpr7; /* 0x500e0 - External Interrupt Vector/Priority Register 7 */
- char res61[12];
- uint eidr7; /* 0x500f0 - External Interrupt Destination Register 7 */
- char res62[12];
- uint eivpr8; /* 0x50100 - External Interrupt Vector/Priority Register 8 */
- char res63[12];
- uint eidr8; /* 0x50110 - External Interrupt Destination Register 8 */
- char res64[12];
- uint eivpr9; /* 0x50120 - External Interrupt Vector/Priority Register 9 */
- char res65[12];
- uint eidr9; /* 0x50130 - External Interrupt Destination Register 9 */
- char res66[12];
- uint eivpr10; /* 0x50140 - External Interrupt Vector/Priority Register 10 */
- char res67[12];
- uint eidr10; /* 0x50150 - External Interrupt Destination Register 10 */
- char res68[12];
- uint eivpr11; /* 0x50160 - External Interrupt Vector/Priority Register 11 */
- char res69[12];
- uint eidr11; /* 0x50170 - External Interrupt Destination Register 11 */
- char res70[140];
- uint iivpr0; /* 0x50200 - Internal Interrupt Vector/Priority Register 0 */
- char res71[12];
- uint iidr0; /* 0x50210 - Internal Interrupt Destination Register 0 */
- char res72[12];
- uint iivpr1; /* 0x50220 - Internal Interrupt Vector/Priority Register 1 */
- char res73[12];
- uint iidr1; /* 0x50230 - Internal Interrupt Destination Register 1 */
- char res74[12];
- uint iivpr2; /* 0x50240 - Internal Interrupt Vector/Priority Register 2 */
- char res75[12];
- uint iidr2; /* 0x50250 - Internal Interrupt Destination Register 2 */
- char res76[12];
- uint iivpr3; /* 0x50260 - Internal Interrupt Vector/Priority Register 3 */
- char res77[12];
- uint iidr3; /* 0x50270 - Internal Interrupt Destination Register 3 */
- char res78[12];
- uint iivpr4; /* 0x50280 - Internal Interrupt Vector/Priority Register 4 */
- char res79[12];
- uint iidr4; /* 0x50290 - Internal Interrupt Destination Register 4 */
- char res80[12];
- uint iivpr5; /* 0x502a0 - Internal Interrupt Vector/Priority Register 5 */
- char res81[12];
- uint iidr5; /* 0x502b0 - Internal Interrupt Destination Register 5 */
- char res82[12];
- uint iivpr6; /* 0x502c0 - Internal Interrupt Vector/Priority Register 6 */
- char res83[12];
- uint iidr6; /* 0x502d0 - Internal Interrupt Destination Register 6 */
- char res84[12];
- uint iivpr7; /* 0x502e0 - Internal Interrupt Vector/Priority Register 7 */
- char res85[12];
- uint iidr7; /* 0x502f0 - Internal Interrupt Destination Register 7 */
- char res86[12];
- uint iivpr8; /* 0x50300 - Internal Interrupt Vector/Priority Register 8 */
- char res87[12];
- uint iidr8; /* 0x50310 - Internal Interrupt Destination Register 8 */
- char res88[12];
- uint iivpr9; /* 0x50320 - Internal Interrupt Vector/Priority Register 9 */
- char res89[12];
- uint iidr9; /* 0x50330 - Internal Interrupt Destination Register 9 */
- char res90[12];
- uint iivpr10; /* 0x50340 - Internal Interrupt Vector/Priority Register 10 */
- char res91[12];
- uint iidr10; /* 0x50350 - Internal Interrupt Destination Register 10 */
- char res92[12];
- uint iivpr11; /* 0x50360 - Internal Interrupt Vector/Priority Register 11 */
- char res93[12];
- uint iidr11; /* 0x50370 - Internal Interrupt Destination Register 11 */
- char res94[12];
- uint iivpr12; /* 0x50380 - Internal Interrupt Vector/Priority Register 12 */
- char res95[12];
- uint iidr12; /* 0x50390 - Internal Interrupt Destination Register 12 */
- char res96[12];
- uint iivpr13; /* 0x503a0 - Internal Interrupt Vector/Priority Register 13 */
- char res97[12];
- uint iidr13; /* 0x503b0 - Internal Interrupt Destination Register 13 */
- char res98[12];
- uint iivpr14; /* 0x503c0 - Internal Interrupt Vector/Priority Register 14 */
- char res99[12];
- uint iidr14; /* 0x503d0 - Internal Interrupt Destination Register 14 */
- char res100[12];
- uint iivpr15; /* 0x503e0 - Internal Interrupt Vector/Priority Register 15 */
- char res101[12];
- uint iidr15; /* 0x503f0 - Internal Interrupt Destination Register 15 */
- char res102[12];
- uint iivpr16; /* 0x50400 - Internal Interrupt Vector/Priority Register 16 */
- char res103[12];
- uint iidr16; /* 0x50410 - Internal Interrupt Destination Register 16 */
- char res104[12];
- uint iivpr17; /* 0x50420 - Internal Interrupt Vector/Priority Register 17 */
- char res105[12];
- uint iidr17; /* 0x50430 - Internal Interrupt Destination Register 17 */
- char res106[12];
- uint iivpr18; /* 0x50440 - Internal Interrupt Vector/Priority Register 18 */
- char res107[12];
- uint iidr18; /* 0x50450 - Internal Interrupt Destination Register 18 */
- char res108[12];
- uint iivpr19; /* 0x50460 - Internal Interrupt Vector/Priority Register 19 */
- char res109[12];
- uint iidr19; /* 0x50470 - Internal Interrupt Destination Register 19 */
- char res110[12];
- uint iivpr20; /* 0x50480 - Internal Interrupt Vector/Priority Register 20 */
- char res111[12];
- uint iidr20; /* 0x50490 - Internal Interrupt Destination Register 20 */
- char res112[12];
- uint iivpr21; /* 0x504a0 - Internal Interrupt Vector/Priority Register 21 */
- char res113[12];
- uint iidr21; /* 0x504b0 - Internal Interrupt Destination Register 21 */
- char res114[12];
- uint iivpr22; /* 0x504c0 - Internal Interrupt Vector/Priority Register 22 */
- char res115[12];
- uint iidr22; /* 0x504d0 - Internal Interrupt Destination Register 22 */
- char res116[12];
- uint iivpr23; /* 0x504e0 - Internal Interrupt Vector/Priority Register 23 */
- char res117[12];
- uint iidr23; /* 0x504f0 - Internal Interrupt Destination Register 23 */
- char res118[12];
- uint iivpr24; /* 0x50500 - Internal Interrupt Vector/Priority Register 24 */
- char res119[12];
- uint iidr24; /* 0x50510 - Internal Interrupt Destination Register 24 */
- char res120[12];
- uint iivpr25; /* 0x50520 - Internal Interrupt Vector/Priority Register 25 */
- char res121[12];
- uint iidr25; /* 0x50530 - Internal Interrupt Destination Register 25 */
- char res122[12];
- uint iivpr26; /* 0x50540 - Internal Interrupt Vector/Priority Register 26 */
- char res123[12];
- uint iidr26; /* 0x50550 - Internal Interrupt Destination Register 26 */
- char res124[12];
- uint iivpr27; /* 0x50560 - Internal Interrupt Vector/Priority Register 27 */
- char res125[12];
- uint iidr27; /* 0x50570 - Internal Interrupt Destination Register 27 */
- char res126[12];
- uint iivpr28; /* 0x50580 - Internal Interrupt Vector/Priority Register 28 */
- char res127[12];
- uint iidr28; /* 0x50590 - Internal Interrupt Destination Register 28 */
- char res128[12];
- uint iivpr29; /* 0x505a0 - Internal Interrupt Vector/Priority Register 29 */
- char res129[12];
- uint iidr29; /* 0x505b0 - Internal Interrupt Destination Register 29 */
- char res130[12];
- uint iivpr30; /* 0x505c0 - Internal Interrupt Vector/Priority Register 30 */
- char res131[12];
- uint iidr30; /* 0x505d0 - Internal Interrupt Destination Register 30 */
- char res132[12];
- uint iivpr31; /* 0x505e0 - Internal Interrupt Vector/Priority Register 31 */
- char res133[12];
- uint iidr31; /* 0x505f0 - Internal Interrupt Destination Register 31 */
- char res134[4108];
- uint mivpr0; /* 0x51600 - Messaging Interrupt Vector/Priority Register 0 */
- char res135[12];
- uint midr0; /* 0x51610 - Messaging Interrupt Destination Register 0 */
- char res136[12];
- uint mivpr1; /* 0x51620 - Messaging Interrupt Vector/Priority Register 1 */
- char res137[12];
- uint midr1; /* 0x51630 - Messaging Interrupt Destination Register 1 */
- char res138[12];
- uint mivpr2; /* 0x51640 - Messaging Interrupt Vector/Priority Register 2 */
- char res139[12];
- uint midr2; /* 0x51650 - Messaging Interrupt Destination Register 2 */
- char res140[12];
- uint mivpr3; /* 0x51660 - Messaging Interrupt Vector/Priority Register 3 */
- char res141[12];
- uint midr3; /* 0x51670 - Messaging Interrupt Destination Register 3 */
- char res142[59852];
- uint ipi0dr0; /* 0x60040 - Processor 0 Interprocessor Interrupt Dispatch Register 0 */
- char res143[12];
- uint ipi0dr1; /* 0x60050 - Processor 0 Interprocessor Interrupt Dispatch Register 1 */
- char res144[12];
- uint ipi0dr2; /* 0x60060 - Processor 0 Interprocessor Interrupt Dispatch Register 2 */
- char res145[12];
- uint ipi0dr3; /* 0x60070 - Processor 0 Interprocessor Interrupt Dispatch Register 3 */
- char res146[12];
- uint ctpr0; /* 0x60080 - Current Task Priority Register for Processor 0 */
- char res147[12];
- uint whoami0; /* 0x60090 - Who Am I Register for Processor 0 */
- char res148[12];
- uint iack0; /* 0x600a0 - Interrupt Acknowledge Register for Processor 0 */
- char res149[12];
- uint eoi0; /* 0x600b0 - End Of Interrupt Register for Processor 0 */
- char res150[130892];
+ u8 res1[64];
+ u32 ipidr0; /* Interprocessor IRQ Dispatch 0 */
+ u8 res2[12];
+ u32 ipidr1; /* Interprocessor IRQ Dispatch 1 */
+ u8 res3[12];
+ u32 ipidr2; /* Interprocessor IRQ Dispatch 2 */
+ u8 res4[12];
+ u32 ipidr3; /* Interprocessor IRQ Dispatch 3 */
+ u8 res5[12];
+ u32 ctpr; /* Current Task Priority */
+ u8 res6[12];
+ u32 whoami; /* Who Am I */
+ u8 res7[12];
+ u32 iack; /* IRQ Acknowledge */
+ u8 res8[12];
+ u32 eoi; /* End Of IRQ */
+ u8 res9[3916];
+ u32 frr; /* Feature Reporting */
+ u8 res10[28];
+ u32 gcr; /* Global Configuration */
+#define MPC85xx_PICGCR_RST 0x80000000
+#define MPC85xx_PICGCR_M 0x20000000
+ u8 res11[92];
+ u32 vir; /* Vendor Identification */
+ u8 res12[12];
+ u32 pir; /* Processor Initialization */
+ u8 res13[12];
+ u32 ipivpr0; /* IPI Vector/Priority 0 */
+ u8 res14[12];
+ u32 ipivpr1; /* IPI Vector/Priority 1 */
+ u8 res15[12];
+ u32 ipivpr2; /* IPI Vector/Priority 2 */
+ u8 res16[12];
+ u32 ipivpr3; /* IPI Vector/Priority 3 */
+ u8 res17[12];
+ u32 svr; /* Spurious Vector */
+ u8 res18[12];
+ u32 tfrr; /* Timer Frequency Reporting */
+ u8 res19[12];
+ u32 gtccr0; /* Global Timer Current Count 0 */
+ u8 res20[12];
+ u32 gtbcr0; /* Global Timer Base Count 0 */
+ u8 res21[12];
+ u32 gtvpr0; /* Global Timer Vector/Priority 0 */
+ u8 res22[12];
+ u32 gtdr0; /* Global Timer Destination 0 */
+ u8 res23[12];
+ u32 gtccr1; /* Global Timer Current Count 1 */
+ u8 res24[12];
+ u32 gtbcr1; /* Global Timer Base Count 1 */
+ u8 res25[12];
+ u32 gtvpr1; /* Global Timer Vector/Priority 1 */
+ u8 res26[12];
+ u32 gtdr1; /* Global Timer Destination 1 */
+ u8 res27[12];
+ u32 gtccr2; /* Global Timer Current Count 2 */
+ u8 res28[12];
+ u32 gtbcr2; /* Global Timer Base Count 2 */
+ u8 res29[12];
+ u32 gtvpr2; /* Global Timer Vector/Priority 2 */
+ u8 res30[12];
+ u32 gtdr2; /* Global Timer Destination 2 */
+ u8 res31[12];
+ u32 gtccr3; /* Global Timer Current Count 3 */
+ u8 res32[12];
+ u32 gtbcr3; /* Global Timer Base Count 3 */
+ u8 res33[12];
+ u32 gtvpr3; /* Global Timer Vector/Priority 3 */
+ u8 res34[12];
+ u32 gtdr3; /* Global Timer Destination 3 */
+ u8 res35[268];
+ u32 tcr; /* Timer Control */
+ u8 res36[12];
+ u32 irqsr0; /* IRQ_OUT Summary 0 */
+ u8 res37[12];
+ u32 irqsr1; /* IRQ_OUT Summary 1 */
+ u8 res38[12];
+ u32 cisr0; /* Critical IRQ Summary 0 */
+ u8 res39[12];
+ u32 cisr1; /* Critical IRQ Summary 1 */
+ u8 res40[188];
+ u32 msgr0; /* Message 0 */
+ u8 res41[12];
+ u32 msgr1; /* Message 1 */
+ u8 res42[12];
+ u32 msgr2; /* Message 2 */
+ u8 res43[12];
+ u32 msgr3; /* Message 3 */
+ u8 res44[204];
+ u32 mer; /* Message Enable */
+ u8 res45[12];
+ u32 msr; /* Message Status */
+ u8 res46[60140];
+ u32 eivpr0; /* External IRQ Vector/Priority 0 */
+ u8 res47[12];
+ u32 eidr0; /* External IRQ Destination 0 */
+ u8 res48[12];
+ u32 eivpr1; /* External IRQ Vector/Priority 1 */
+ u8 res49[12];
+ u32 eidr1; /* External IRQ Destination 1 */
+ u8 res50[12];
+ u32 eivpr2; /* External IRQ Vector/Priority 2 */
+ u8 res51[12];
+ u32 eidr2; /* External IRQ Destination 2 */
+ u8 res52[12];
+ u32 eivpr3; /* External IRQ Vector/Priority 3 */
+ u8 res53[12];
+ u32 eidr3; /* External IRQ Destination 3 */
+ u8 res54[12];
+ u32 eivpr4; /* External IRQ Vector/Priority 4 */
+ u8 res55[12];
+ u32 eidr4; /* External IRQ Destination 4 */
+ u8 res56[12];
+ u32 eivpr5; /* External IRQ Vector/Priority 5 */
+ u8 res57[12];
+ u32 eidr5; /* External IRQ Destination 5 */
+ u8 res58[12];
+ u32 eivpr6; /* External IRQ Vector/Priority 6 */
+ u8 res59[12];
+ u32 eidr6; /* External IRQ Destination 6 */
+ u8 res60[12];
+ u32 eivpr7; /* External IRQ Vector/Priority 7 */
+ u8 res61[12];
+ u32 eidr7; /* External IRQ Destination 7 */
+ u8 res62[12];
+ u32 eivpr8; /* External IRQ Vector/Priority 8 */
+ u8 res63[12];
+ u32 eidr8; /* External IRQ Destination 8 */
+ u8 res64[12];
+ u32 eivpr9; /* External IRQ Vector/Priority 9 */
+ u8 res65[12];
+ u32 eidr9; /* External IRQ Destination 9 */
+ u8 res66[12];
+ u32 eivpr10; /* External IRQ Vector/Priority 10 */
+ u8 res67[12];
+ u32 eidr10; /* External IRQ Destination 10 */
+ u8 res68[12];
+ u32 eivpr11; /* External IRQ Vector/Priority 11 */
+ u8 res69[12];
+ u32 eidr11; /* External IRQ Destination 11 */
+ u8 res70[140];
+ u32 iivpr0; /* Internal IRQ Vector/Priority 0 */
+ u8 res71[12];
+ u32 iidr0; /* Internal IRQ Destination 0 */
+ u8 res72[12];
+ u32 iivpr1; /* Internal IRQ Vector/Priority 1 */
+ u8 res73[12];
+ u32 iidr1; /* Internal IRQ Destination 1 */
+ u8 res74[12];
+ u32 iivpr2; /* Internal IRQ Vector/Priority 2 */
+ u8 res75[12];
+ u32 iidr2; /* Internal IRQ Destination 2 */
+ u8 res76[12];
+ u32 iivpr3; /* Internal IRQ Vector/Priority 3 */
+ u8 res77[12];
+ u32 iidr3; /* Internal IRQ Destination 3 */
+ u8 res78[12];
+ u32 iivpr4; /* Internal IRQ Vector/Priority 4 */
+ u8 res79[12];
+ u32 iidr4; /* Internal IRQ Destination 4 */
+ u8 res80[12];
+ u32 iivpr5; /* Internal IRQ Vector/Priority 5 */
+ u8 res81[12];
+ u32 iidr5; /* Internal IRQ Destination 5 */
+ u8 res82[12];
+ u32 iivpr6; /* Internal IRQ Vector/Priority 6 */
+ u8 res83[12];
+ u32 iidr6; /* Internal IRQ Destination 6 */
+ u8 res84[12];
+ u32 iivpr7; /* Internal IRQ Vector/Priority 7 */
+ u8 res85[12];
+ u32 iidr7; /* Internal IRQ Destination 7 */
+ u8 res86[12];
+ u32 iivpr8; /* Internal IRQ Vector/Priority 8 */
+ u8 res87[12];
+ u32 iidr8; /* Internal IRQ Destination 8 */
+ u8 res88[12];
+ u32 iivpr9; /* Internal IRQ Vector/Priority 9 */
+ u8 res89[12];
+ u32 iidr9; /* Internal IRQ Destination 9 */
+ u8 res90[12];
+ u32 iivpr10; /* Internal IRQ Vector/Priority 10 */
+ u8 res91[12];
+ u32 iidr10; /* Internal IRQ Destination 10 */
+ u8 res92[12];
+ u32 iivpr11; /* Internal IRQ Vector/Priority 11 */
+ u8 res93[12];
+ u32 iidr11; /* Internal IRQ Destination 11 */
+ u8 res94[12];
+ u32 iivpr12; /* Internal IRQ Vector/Priority 12 */
+ u8 res95[12];
+ u32 iidr12; /* Internal IRQ Destination 12 */
+ u8 res96[12];
+ u32 iivpr13; /* Internal IRQ Vector/Priority 13 */
+ u8 res97[12];
+ u32 iidr13; /* Internal IRQ Destination 13 */
+ u8 res98[12];
+ u32 iivpr14; /* Internal IRQ Vector/Priority 14 */
+ u8 res99[12];
+ u32 iidr14; /* Internal IRQ Destination 14 */
+ u8 res100[12];
+ u32 iivpr15; /* Internal IRQ Vector/Priority 15 */
+ u8 res101[12];
+ u32 iidr15; /* Internal IRQ Destination 15 */
+ u8 res102[12];
+ u32 iivpr16; /* Internal IRQ Vector/Priority 16 */
+ u8 res103[12];
+ u32 iidr16; /* Internal IRQ Destination 16 */
+ u8 res104[12];
+ u32 iivpr17; /* Internal IRQ Vector/Priority 17 */
+ u8 res105[12];
+ u32 iidr17; /* Internal IRQ Destination 17 */
+ u8 res106[12];
+ u32 iivpr18; /* Internal IRQ Vector/Priority 18 */
+ u8 res107[12];
+ u32 iidr18; /* Internal IRQ Destination 18 */
+ u8 res108[12];
+ u32 iivpr19; /* Internal IRQ Vector/Priority 19 */
+ u8 res109[12];
+ u32 iidr19; /* Internal IRQ Destination 19 */
+ u8 res110[12];
+ u32 iivpr20; /* Internal IRQ Vector/Priority 20 */
+ u8 res111[12];
+ u32 iidr20; /* Internal IRQ Destination 20 */
+ u8 res112[12];
+ u32 iivpr21; /* Internal IRQ Vector/Priority 21 */
+ u8 res113[12];
+ u32 iidr21; /* Internal IRQ Destination 21 */
+ u8 res114[12];
+ u32 iivpr22; /* Internal IRQ Vector/Priority 22 */
+ u8 res115[12];
+ u32 iidr22; /* Internal IRQ Destination 22 */
+ u8 res116[12];
+ u32 iivpr23; /* Internal IRQ Vector/Priority 23 */
+ u8 res117[12];
+ u32 iidr23; /* Internal IRQ Destination 23 */
+ u8 res118[12];
+ u32 iivpr24; /* Internal IRQ Vector/Priority 24 */
+ u8 res119[12];
+ u32 iidr24; /* Internal IRQ Destination 24 */
+ u8 res120[12];
+ u32 iivpr25; /* Internal IRQ Vector/Priority 25 */
+ u8 res121[12];
+ u32 iidr25; /* Internal IRQ Destination 25 */
+ u8 res122[12];
+ u32 iivpr26; /* Internal IRQ Vector/Priority 26 */
+ u8 res123[12];
+ u32 iidr26; /* Internal IRQ Destination 26 */
+ u8 res124[12];
+ u32 iivpr27; /* Internal IRQ Vector/Priority 27 */
+ u8 res125[12];
+ u32 iidr27; /* Internal IRQ Destination 27 */
+ u8 res126[12];
+ u32 iivpr28; /* Internal IRQ Vector/Priority 28 */
+ u8 res127[12];
+ u32 iidr28; /* Internal IRQ Destination 28 */
+ u8 res128[12];
+ u32 iivpr29; /* Internal IRQ Vector/Priority 29 */
+ u8 res129[12];
+ u32 iidr29; /* Internal IRQ Destination 29 */
+ u8 res130[12];
+ u32 iivpr30; /* Internal IRQ Vector/Priority 30 */
+ u8 res131[12];
+ u32 iidr30; /* Internal IRQ Destination 30 */
+ u8 res132[12];
+ u32 iivpr31; /* Internal IRQ Vector/Priority 31 */
+ u8 res133[12];
+ u32 iidr31; /* Internal IRQ Destination 31 */
+ u8 res134[4108];
+ u32 mivpr0; /* Messaging IRQ Vector/Priority 0 */
+ u8 res135[12];
+ u32 midr0; /* Messaging IRQ Destination 0 */
+ u8 res136[12];
+ u32 mivpr1; /* Messaging IRQ Vector/Priority 1 */
+ u8 res137[12];
+ u32 midr1; /* Messaging IRQ Destination 1 */
+ u8 res138[12];
+ u32 mivpr2; /* Messaging IRQ Vector/Priority 2 */
+ u8 res139[12];
+ u32 midr2; /* Messaging IRQ Destination 2 */
+ u8 res140[12];
+ u32 mivpr3; /* Messaging IRQ Vector/Priority 3 */
+ u8 res141[12];
+ u32 midr3; /* Messaging IRQ Destination 3 */
+ u8 res142[59852];
+ u32 ipi0dr0; /* Processor 0 Interprocessor IRQ Dispatch 0 */
+ u8 res143[12];
+ u32 ipi0dr1; /* Processor 0 Interprocessor IRQ Dispatch 1 */
+ u8 res144[12];
+ u32 ipi0dr2; /* Processor 0 Interprocessor IRQ Dispatch 2 */
+ u8 res145[12];
+ u32 ipi0dr3; /* Processor 0 Interprocessor IRQ Dispatch 3 */
+ u8 res146[12];
+ u32 ctpr0; /* Current Task Priority for Processor 0 */
+ u8 res147[12];
+ u32 whoami0; /* Who Am I for Processor 0 */
+ u8 res148[12];
+ u32 iack0; /* IRQ Acknowledge for Processor 0 */
+ u8 res149[12];
+ u32 eoi0; /* End Of IRQ for Processor 0 */
+ u8 res150[130892];
} ccsr_pic_t;
-/*
- * CPM Block(0x8_0000-0xc_0000)
- */
+/* CPM Block */
#ifndef CONFIG_CPM2
typedef struct ccsr_cpm {
- char res[262144];
+ u8 res[262144];
} ccsr_cpm_t;
#else
/*
- * 0x8000-0x8ffff:DPARM
- * 0x9000-0x90bff: General SIU
+ * DPARM
+ * General SIU
*/
typedef struct ccsr_cpm_siu {
- char res1[80];
- uint smaer;
- uint smser;
- uint smevr;
- char res2[4];
- uint lmaer;
- uint lmser;
- uint lmevr;
- char res3[2964];
+ u8 res1[80];
+ u32 smaer;
+ u32 smser;
+ u32 smevr;
+ u8 res2[4];
+ u32 lmaer;
+ u32 lmser;
+ u32 lmevr;
+ u8 res3[2964];
} ccsr_cpm_siu_t;
-/* 0x90c00-0x90cff: Interrupt Controller */
+/* IRQ Controller */
typedef struct ccsr_cpm_intctl {
- ushort sicr;
- char res1[2];
- uint sivec;
- uint sipnrh;
- uint sipnrl;
- uint siprr;
- uint scprrh;
- uint scprrl;
- uint simrh;
- uint simrl;
- uint siexr;
- char res2[88];
- uint sccr;
- char res3[124];
+ u16 sicr;
+ u8 res1[2];
+ u32 sivec;
+ u32 sipnrh;
+ u32 sipnrl;
+ u32 siprr;
+ u32 scprrh;
+ u32 scprrl;
+ u32 simrh;
+ u32 simrl;
+ u32 siexr;
+ u8 res2[88];
+ u32 sccr;
+ u8 res3[124];
} ccsr_cpm_intctl_t;
-/* 0x90d00-0x90d7f: input/output port */
+/* input/output port */
typedef struct ccsr_cpm_iop {
- uint pdira;
- uint ppara;
- uint psora;
- uint podra;
- uint pdata;
- char res1[12];
- uint pdirb;
- uint pparb;
- uint psorb;
- uint podrb;
- uint pdatb;
- char res2[12];
- uint pdirc;
- uint pparc;
- uint psorc;
- uint podrc;
- uint pdatc;
- char res3[12];
- uint pdird;
- uint ppard;
- uint psord;
- uint podrd;
- uint pdatd;
- char res4[12];
+ u32 pdira;
+ u32 ppara;
+ u32 psora;
+ u32 podra;
+ u32 pdata;
+ u8 res1[12];
+ u32 pdirb;
+ u32 pparb;
+ u32 psorb;
+ u32 podrb;
+ u32 pdatb;
+ u8 res2[12];
+ u32 pdirc;
+ u32 pparc;
+ u32 psorc;
+ u32 podrc;
+ u32 pdatc;
+ u8 res3[12];
+ u32 pdird;
+ u32 ppard;
+ u32 psord;
+ u32 podrd;
+ u32 pdatd;
+ u8 res4[12];
} ccsr_cpm_iop_t;
-/* 0x90d80-0x91017: CPM timers */
+/* CPM timers */
typedef struct ccsr_cpm_timer {
- u_char tgcr1;
- char res1[3];
- u_char tgcr2;
- char res2[11];
- ushort tmr1;
- ushort tmr2;
- ushort trr1;
- ushort trr2;
- ushort tcr1;
- ushort tcr2;
- ushort tcn1;
- ushort tcn2;
- ushort tmr3;
- ushort tmr4;
- ushort trr3;
- ushort trr4;
- ushort tcr3;
- ushort tcr4;
- ushort tcn3;
- ushort tcn4;
- ushort ter1;
- ushort ter2;
- ushort ter3;
- ushort ter4;
- char res3[608];
+ u8 tgcr1;
+ u8 res1[3];
+ u8 tgcr2;
+ u8 res2[11];
+ u16 tmr1;
+ u16 tmr2;
+ u16 trr1;
+ u16 trr2;
+ u16 tcr1;
+ u16 tcr2;
+ u16 tcn1;
+ u16 tcn2;
+ u16 tmr3;
+ u16 tmr4;
+ u16 trr3;
+ u16 trr4;
+ u16 tcr3;
+ u16 tcr4;
+ u16 tcn3;
+ u16 tcn4;
+ u16 ter1;
+ u16 ter2;
+ u16 ter3;
+ u16 ter4;
+ u8 res3[608];
} ccsr_cpm_timer_t;
-/* 0x91018-0x912ff: SDMA */
+/* SDMA */
typedef struct ccsr_cpm_sdma {
- uchar sdsr;
- char res1[3];
- uchar sdmr;
- char res2[739];
+ u8 sdsr;
+ u8 res1[3];
+ u8 sdmr;
+ u8 res2[739];
} ccsr_cpm_sdma_t;
-/* 0x91300-0x9131f: FCC1 */
+/* FCC1 */
typedef struct ccsr_cpm_fcc1 {
- uint gfmr;
- uint fpsmr;
- ushort ftodr;
- char res1[2];
- ushort fdsr;
- char res2[2];
- ushort fcce;
- char res3[2];
- ushort fccm;
- char res4[2];
- u_char fccs;
- char res5[3];
- u_char ftirr_phy[4];
+ u32 gfmr;
+ u32 fpsmr;
+ u16 ftodr;
+ u8 res1[2];
+ u16 fdsr;
+ u8 res2[2];
+ u16 fcce;
+ u8 res3[2];
+ u16 fccm;
+ u8 res4[2];
+ u8 fccs;
+ u8 res5[3];
+ u8 ftirr_phy[4];
} ccsr_cpm_fcc1_t;
-/* 0x91320-0x9133f: FCC2 */
+/* FCC2 */
typedef struct ccsr_cpm_fcc2 {
- uint gfmr;
- uint fpsmr;
- ushort ftodr;
- char res1[2];
- ushort fdsr;
- char res2[2];
- ushort fcce;
- char res3[2];
- ushort fccm;
- char res4[2];
- u_char fccs;
- char res5[3];
- u_char ftirr_phy[4];
+ u32 gfmr;
+ u32 fpsmr;
+ u16 ftodr;
+ u8 res1[2];
+ u16 fdsr;
+ u8 res2[2];
+ u16 fcce;
+ u8 res3[2];
+ u16 fccm;
+ u8 res4[2];
+ u8 fccs;
+ u8 res5[3];
+ u8 ftirr_phy[4];
} ccsr_cpm_fcc2_t;
-/* 0x91340-0x9137f: FCC3 */
+/* FCC3 */
typedef struct ccsr_cpm_fcc3 {
- uint gfmr;
- uint fpsmr;
- ushort ftodr;
- char res1[2];
- ushort fdsr;
- char res2[2];
- ushort fcce;
- char res3[2];
- ushort fccm;
- char res4[2];
- u_char fccs;
- char res5[3];
- char res[36];
+ u32 gfmr;
+ u32 fpsmr;
+ u16 ftodr;
+ u8 res1[2];
+ u16 fdsr;
+ u8 res2[2];
+ u16 fcce;
+ u8 res3[2];
+ u16 fccm;
+ u8 res4[2];
+ u8 fccs;
+ u8 res5[3];
+ u8 res[36];
} ccsr_cpm_fcc3_t;
-/* 0x91380-0x9139f: FCC1 extended */
+/* FCC1 extended */
typedef struct ccsr_cpm_fcc1_ext {
- uint firper;
- uint firer;
- uint firsr_h;
- uint firsr_l;
- u_char gfemr;
- char res[15];
+ u32 firper;
+ u32 firer;
+ u32 firsr_h;
+ u32 firsr_l;
+ u8 gfemr;
+ u8 res[15];
} ccsr_cpm_fcc1_ext_t;
-/* 0x913a0-0x913cf: FCC2 extended */
+/* FCC2 extended */
typedef struct ccsr_cpm_fcc2_ext {
- uint firper;
- uint firer;
- uint firsr_h;
- uint firsr_l;
- u_char gfemr;
- char res[31];
+ u32 firper;
+ u32 firer;
+ u32 firsr_h;
+ u32 firsr_l;
+ u8 gfemr;
+ u8 res[31];
} ccsr_cpm_fcc2_ext_t;
-/* 0x913d0-0x913ff: FCC3 extended */
+/* FCC3 extended */
typedef struct ccsr_cpm_fcc3_ext {
- u_char gfemr;
- char res[47];
+ u8 gfemr;
+ u8 res[47];
} ccsr_cpm_fcc3_ext_t;
-/* 0x91400-0x915ef: TC layers */
+/* TC layers */
typedef struct ccsr_cpm_tmp1 {
- char res[496];
+ u8 res[496];
} ccsr_cpm_tmp1_t;
-/* 0x915f0-0x9185f: BRGs:5,6,7,8 */
+/* BRGs:5,6,7,8 */
typedef struct ccsr_cpm_brg2 {
- uint brgc5;
- uint brgc6;
- uint brgc7;
- uint brgc8;
- char res[608];
+ u32 brgc5;
+ u32 brgc6;
+ u32 brgc7;
+ u32 brgc8;
+ u8 res[608];
} ccsr_cpm_brg2_t;
-/* 0x91860-0x919bf: I2C */
+/* I2C */
typedef struct ccsr_cpm_i2c {
- u_char i2mod;
- char res1[3];
- u_char i2add;
- char res2[3];
- u_char i2brg;
- char res3[3];
- u_char i2com;
- char res4[3];
- u_char i2cer;
- char res5[3];
- u_char i2cmr;
- char res6[331];
+ u8 i2mod;
+ u8 res1[3];
+ u8 i2add;
+ u8 res2[3];
+ u8 i2brg;
+ u8 res3[3];
+ u8 i2com;
+ u8 res4[3];
+ u8 i2cer;
+ u8 res5[3];
+ u8 i2cmr;
+ u8 res6[331];
} ccsr_cpm_i2c_t;
-/* 0x919c0-0x919ef: CPM core */
+/* CPM core */
typedef struct ccsr_cpm_cp {
- uint cpcr;
- uint rccr;
- char res1[14];
- ushort rter;
- char res2[2];
- ushort rtmr;
- ushort rtscr;
- char res3[2];
- uint rtsr;
- char res4[12];
+ u32 cpcr;
+ u32 rccr;
+ u8 res1[14];
+ u16 rter;
+ u8 res2[2];
+ u16 rtmr;
+ u16 rtscr;
+ u8 res3[2];
+ u32 rtsr;
+ u8 res4[12];
} ccsr_cpm_cp_t;
-/* 0x919f0-0x919ff: BRGs:1,2,3,4 */
+/* BRGs:1,2,3,4 */
typedef struct ccsr_cpm_brg1 {
- uint brgc1;
- uint brgc2;
- uint brgc3;
- uint brgc4;
+ u32 brgc1;
+ u32 brgc2;
+ u32 brgc3;
+ u32 brgc4;
} ccsr_cpm_brg1_t;
-/* 0x91a00-0x91a9f: SCC1-SCC4 */
+/* SCC1-SCC4 */
typedef struct ccsr_cpm_scc {
- uint gsmrl;
- uint gsmrh;
- ushort psmr;
- char res1[2];
- ushort todr;
- ushort dsr;
- ushort scce;
- char res2[2];
- ushort sccm;
- char res3;
- u_char sccs;
- char res4[8];
+ u32 gsmrl;
+ u32 gsmrh;
+ u16 psmr;
+ u8 res1[2];
+ u16 todr;
+ u16 dsr;
+ u16 scce;
+ u8 res2[2];
+ u16 sccm;
+ u8 res3;
+ u8 sccs;
+ u8 res4[8];
} ccsr_cpm_scc_t;
-/* 0x91a80-0x91a9f */
typedef struct ccsr_cpm_tmp2 {
- char res[32];
+ u8 res[32];
} ccsr_cpm_tmp2_t;
-/* 0x91aa0-0x91aff: SPI */
+/* SPI */
typedef struct ccsr_cpm_spi {
- ushort spmode;
- char res1[4];
- u_char spie;
- char res2[3];
- u_char spim;
- char res3[2];
- u_char spcom;
- char res4[82];
+ u16 spmode;
+ u8 res1[4];
+ u8 spie;
+ u8 res2[3];
+ u8 spim;
+ u8 res3[2];
+ u8 spcom;
+ u8 res4[82];
} ccsr_cpm_spi_t;
-/* 0x91b00-0x91b1f: CPM MUX */
+/* CPM MUX */
typedef struct ccsr_cpm_mux {
- u_char cmxsi1cr;
- char res1;
- u_char cmxsi2cr;
- char res2;
- uint cmxfcr;
- uint cmxscr;
- char res3[2];
- ushort cmxuar;
- char res4[16];
+ u8 cmxsi1cr;
+ u8 res1;
+ u8 cmxsi2cr;
+ u8 res2;
+ u32 cmxfcr;
+ u32 cmxscr;
+ u8 res3[2];
+ u16 cmxuar;
+ u8 res4[16];
} ccsr_cpm_mux_t;
-/* 0x91b20-0xbffff: SI,MCC,etc */
+/* SI,MCC,etc */
typedef struct ccsr_cpm_tmp3 {
- char res[58592];
+ u8 res[58592];
} ccsr_cpm_tmp3_t;
typedef struct ccsr_cpm_iram {
- unsigned long iram[8192];
- char res[98304];
+ u32 iram[8192];
+ u8 res[98304];
} ccsr_cpm_iram_t;
typedef struct ccsr_cpm {
- /* Some references are into the unique and known dpram spaces,
+ /* Some references are into the unique & known dpram spaces,
* others are from the generic base.
*/
#define im_dprambase im_dpram1
- u_char im_dpram1[16*1024];
- char res1[16*1024];
- u_char im_dpram2[16*1024];
- char res2[16*1024];
- ccsr_cpm_siu_t im_cpm_siu; /* SIU Configuration */
- ccsr_cpm_intctl_t im_cpm_intctl; /* Interrupt Controller */
- ccsr_cpm_iop_t im_cpm_iop; /* IO Port control/status */
- ccsr_cpm_timer_t im_cpm_timer; /* CPM timers */
- ccsr_cpm_sdma_t im_cpm_sdma; /* SDMA control/status */
+ u8 im_dpram1[16*1024];
+ u8 res1[16*1024];
+ u8 im_dpram2[16*1024];
+ u8 res2[16*1024];
+ ccsr_cpm_siu_t im_cpm_siu; /* SIU Configuration */
+ ccsr_cpm_intctl_t im_cpm_intctl; /* IRQ Controller */
+ ccsr_cpm_iop_t im_cpm_iop; /* IO Port control/status */
+ ccsr_cpm_timer_t im_cpm_timer; /* CPM timers */
+ ccsr_cpm_sdma_t im_cpm_sdma; /* SDMA control/status */
ccsr_cpm_fcc1_t im_cpm_fcc1;
ccsr_cpm_fcc2_t im_cpm_fcc2;
ccsr_cpm_fcc3_t im_cpm_fcc3;
} ccsr_cpm_t;
#endif
-/*
- * RapidIO Registers(0xc_0000-0xe_0000)
- */
+/* RapidIO Registers */
typedef struct ccsr_rio {
- uint didcar; /* 0xc0000 - Device Identity Capability Register */
- uint dicar; /* 0xc0004 - Device Information Capability Register */
- uint aidcar; /* 0xc0008 - Assembly Identity Capability Register */
- uint aicar; /* 0xc000c - Assembly Information Capability Register */
- uint pefcar; /* 0xc0010 - Processing Element Features Capability Register */
- uint spicar; /* 0xc0014 - Switch Port Information Capability Register */
- uint socar; /* 0xc0018 - Source Operations Capability Register */
- uint docar; /* 0xc001c - Destination Operations Capability Register */
- char res1[32];
- uint msr; /* 0xc0040 - Mailbox Command And Status Register */
- uint pwdcsr; /* 0xc0044 - Port-Write and Doorbell Command And Status Register */
- char res2[4];
- uint pellccsr; /* 0xc004c - Processing Element Logic Layer Control Command and Status Register */
- char res3[12];
- uint lcsbacsr; /* 0xc005c - Local Configuration Space Base Address Command and Status Register */
- uint bdidcsr; /* 0xc0060 - Base Device ID Command and Status Register */
- char res4[4];
- uint hbdidlcsr; /* 0xc0068 - Host Base Device ID Lock Command and Status Register */
- uint ctcsr; /* 0xc006c - Component Tag Command and Status Register */
- char res5[144];
- uint pmbh0csr; /* 0xc0100 - 8/16 LP-LVDS Port Maintenance Block Header 0 Command and Status Register */
- char res6[28];
- uint pltoccsr; /* 0xc0120 - Port Link Time-out Control Command and Status Register */
- uint prtoccsr; /* 0xc0124 - Port Response Time-out Control Command and Status Register */
- char res7[20];
- uint pgccsr; /* 0xc013c - Port General Command and Status Register */
- uint plmreqcsr; /* 0xc0140 - Port Link Maintenance Request Command and Status Register */
- uint plmrespcsr; /* 0xc0144 - Port Link Maintenance Response Command and Status Register */
- uint plascsr; /* 0xc0148 - Port Local Ackid Status Command and Status Register */
- char res8[12];
- uint pescsr; /* 0xc0158 - Port Error and Status Command and Status Register */
- uint pccsr; /* 0xc015c - Port Control Command and Status Register */
- char res9[65184];
- uint cr; /* 0xd0000 - Port Control Command and Status Register */
- char res10[12];
- uint pcr; /* 0xd0010 - Port Configuration Register */
- uint peir; /* 0xd0014 - Port Error Injection Register */
- char res11[3048];
- uint rowtar0; /* 0xd0c00 - RapidIO Outbound Window Translation Address Register 0 */
- char res12[12];
- uint rowar0; /* 0xd0c10 - RapidIO Outbound Attributes Register 0 */
- char res13[12];
- uint rowtar1; /* 0xd0c20 - RapidIO Outbound Window Translation Address Register 1 */
- char res14[4];
- uint rowbar1; /* 0xd0c28 - RapidIO Outbound Window Base Address Register 1 */
- char res15[4];
- uint rowar1; /* 0xd0c30 - RapidIO Outbound Attributes Register 1 */
- char res16[12];
- uint rowtar2; /* 0xd0c40 - RapidIO Outbound Window Translation Address Register 2 */
- char res17[4];
- uint rowbar2; /* 0xd0c48 - RapidIO Outbound Window Base Address Register 2 */
- char res18[4];
- uint rowar2; /* 0xd0c50 - RapidIO Outbound Attributes Register 2 */
- char res19[12];
- uint rowtar3; /* 0xd0c60 - RapidIO Outbound Window Translation Address Register 3 */
- char res20[4];
- uint rowbar3; /* 0xd0c68 - RapidIO Outbound Window Base Address Register 3 */
- char res21[4];
- uint rowar3; /* 0xd0c70 - RapidIO Outbound Attributes Register 3 */
- char res22[12];
- uint rowtar4; /* 0xd0c80 - RapidIO Outbound Window Translation Address Register 4 */
- char res23[4];
- uint rowbar4; /* 0xd0c88 - RapidIO Outbound Window Base Address Register 4 */
- char res24[4];
- uint rowar4; /* 0xd0c90 - RapidIO Outbound Attributes Register 4 */
- char res25[12];
- uint rowtar5; /* 0xd0ca0 - RapidIO Outbound Window Translation Address Register 5 */
- char res26[4];
- uint rowbar5; /* 0xd0ca8 - RapidIO Outbound Window Base Address Register 5 */
- char res27[4];
- uint rowar5; /* 0xd0cb0 - RapidIO Outbound Attributes Register 5 */
- char res28[12];
- uint rowtar6; /* 0xd0cc0 - RapidIO Outbound Window Translation Address Register 6 */
- char res29[4];
- uint rowbar6; /* 0xd0cc8 - RapidIO Outbound Window Base Address Register 6 */
- char res30[4];
- uint rowar6; /* 0xd0cd0 - RapidIO Outbound Attributes Register 6 */
- char res31[12];
- uint rowtar7; /* 0xd0ce0 - RapidIO Outbound Window Translation Address Register 7 */
- char res32[4];
- uint rowbar7; /* 0xd0ce8 - RapidIO Outbound Window Base Address Register 7 */
- char res33[4];
- uint rowar7; /* 0xd0cf0 - RapidIO Outbound Attributes Register 7 */
- char res34[12];
- uint rowtar8; /* 0xd0d00 - RapidIO Outbound Window Translation Address Register 8 */
- char res35[4];
- uint rowbar8; /* 0xd0d08 - RapidIO Outbound Window Base Address Register 8 */
- char res36[4];
- uint rowar8; /* 0xd0d10 - RapidIO Outbound Attributes Register 8 */
- char res37[76];
- uint riwtar4; /* 0xd0d60 - RapidIO Inbound Window Translation Address Register 4 */
- char res38[4];
- uint riwbar4; /* 0xd0d68 - RapidIO Inbound Window Base Address Register 4 */
- char res39[4];
- uint riwar4; /* 0xd0d70 - RapidIO Inbound Attributes Register 4 */
- char res40[12];
- uint riwtar3; /* 0xd0d80 - RapidIO Inbound Window Translation Address Register 3 */
- char res41[4];
- uint riwbar3; /* 0xd0d88 - RapidIO Inbound Window Base Address Register 3 */
- char res42[4];
- uint riwar3; /* 0xd0d90 - RapidIO Inbound Attributes Register 3 */
- char res43[12];
- uint riwtar2; /* 0xd0da0 - RapidIO Inbound Window Translation Address Register 2 */
- char res44[4];
- uint riwbar2; /* 0xd0da8 - RapidIO Inbound Window Base Address Register 2 */
- char res45[4];
- uint riwar2; /* 0xd0db0 - RapidIO Inbound Attributes Register 2 */
- char res46[12];
- uint riwtar1; /* 0xd0dc0 - RapidIO Inbound Window Translation Address Register 1 */
- char res47[4];
- uint riwbar1; /* 0xd0dc8 - RapidIO Inbound Window Base Address Register 1 */
- char res48[4];
- uint riwar1; /* 0xd0dd0 - RapidIO Inbound Attributes Register 1 */
- char res49[12];
- uint riwtar0; /* 0xd0de0 - RapidIO Inbound Window Translation Address Register 0 */
- char res50[12];
- uint riwar0; /* 0xd0df0 - RapidIO Inbound Attributes Register 0 */
- char res51[12];
- uint pnfedr; /* 0xd0e00 - Port Notification/Fatal Error Detect Register */
- uint pnfedir; /* 0xd0e04 - Port Notification/Fatal Error Detect Register */
- uint pnfeier; /* 0xd0e08 - Port Notification/Fatal Error Interrupt Enable Register */
- uint pecr; /* 0xd0e0c - Port Error Control Register */
- uint pepcsr0; /* 0xd0e10 - Port Error Packet/Control Symbol Register 0 */
- uint pepr1; /* 0xd0e14 - Port Error Packet Register 1 */
- uint pepr2; /* 0xd0e18 - Port Error Packet Register 2 */
- char res52[4];
- uint predr; /* 0xd0e20 - Port Recoverable Error Detect Register */
- char res53[4];
- uint pertr; /* 0xd0e28 - Port Error Recovery Threshold Register */
- uint prtr; /* 0xd0e2c - Port Retry Threshold Register */
- char res54[464];
- uint omr; /* 0xd1000 - Outbound Mode Register */
- uint osr; /* 0xd1004 - Outbound Status Register */
- uint eodqtpar; /* 0xd1008 - Extended Outbound Descriptor Queue Tail Pointer Address Register */
- uint odqtpar; /* 0xd100c - Outbound Descriptor Queue Tail Pointer Address Register */
- uint eosar; /* 0xd1010 - Extended Outbound Unit Source Address Register */
- uint osar; /* 0xd1014 - Outbound Unit Source Address Register */
- uint odpr; /* 0xd1018 - Outbound Destination Port Register */
- uint odatr; /* 0xd101c - Outbound Destination Attributes Register */
- uint odcr; /* 0xd1020 - Outbound Doubleword Count Register */
- uint eodqhpar; /* 0xd1024 - Extended Outbound Descriptor Queue Head Pointer Address Register */
- uint odqhpar; /* 0xd1028 - Outbound Descriptor Queue Head Pointer Address Register */
- char res55[52];
- uint imr; /* 0xd1060 - Outbound Mode Register */
- uint isr; /* 0xd1064 - Inbound Status Register */
- uint eidqtpar; /* 0xd1068 - Extended Inbound Descriptor Queue Tail Pointer Address Register */
- uint idqtpar; /* 0xd106c - Inbound Descriptor Queue Tail Pointer Address Register */
- uint eifqhpar; /* 0xd1070 - Extended Inbound Frame Queue Head Pointer Address Register */
- uint ifqhpar; /* 0xd1074 - Inbound Frame Queue Head Pointer Address Register */
- char res56[1000];
- uint dmr; /* 0xd1460 - Doorbell Mode Register */
- uint dsr; /* 0xd1464 - Doorbell Status Register */
- uint edqtpar; /* 0xd1468 - Extended Doorbell Queue Tail Pointer Address Register */
- uint dqtpar; /* 0xd146c - Doorbell Queue Tail Pointer Address Register */
- uint edqhpar; /* 0xd1470 - Extended Doorbell Queue Head Pointer Address Register */
- uint dqhpar; /* 0xd1474 - Doorbell Queue Head Pointer Address Register */
- char res57[104];
- uint pwmr; /* 0xd14e0 - Port-Write Mode Register */
- uint pwsr; /* 0xd14e4 - Port-Write Status Register */
- uint epwqbar; /* 0xd14e8 - Extended Port-Write Queue Base Address Register */
- uint pwqbar; /* 0xd14ec - Port-Write Queue Base Address Register */
- char res58[60176];
+ u32 didcar; /* Device Identity Capability */
+ u32 dicar; /* Device Information Capability */
+ u32 aidcar; /* Assembly Identity Capability */
+ u32 aicar; /* Assembly Information Capability */
+ u32 pefcar; /* Processing Element Features Capability */
+ u32 spicar; /* Switch Port Information Capability */
+ u32 socar; /* Source Operations Capability */
+ u32 docar; /* Destination Operations Capability */
+ u8 res1[32];
+ u32 msr; /* Mailbox Cmd And Status */
+ u32 pwdcsr; /* Port-Write & Doorbell Cmd And Status */
+ u8 res2[4];
+ u32 pellccsr; /* Processing Element Logic Layer CCSR */
+ u8 res3[12];
+ u32 lcsbacsr; /* Local Cfg Space Base Addr Cmd & Status */
+ u32 bdidcsr; /* Base Device ID Cmd & Status */
+ u8 res4[4];
+ u32 hbdidlcsr; /* Host Base Device ID Lock Cmd & Status */
+ u32 ctcsr; /* Component Tag Cmd & Status */
+ u8 res5[144];
+ u32 pmbh0csr; /* Port Maint. Block Hdr 0 Cmd & Status */
+ u8 res6[28];
+ u32 pltoccsr; /* Port Link Time-out Ctrl Cmd & Status */
+ u32 prtoccsr; /* Port Response Time-out Ctrl Cmd & Status */
+ u8 res7[20];
+ u32 pgccsr; /* Port General Cmd & Status */
+ u32 plmreqcsr; /* Port Link Maint. Request Cmd & Status */
+ u32 plmrespcsr; /* Port Link Maint. Response Cmd & Status */
+ u32 plascsr; /* Port Local Ackid Status Cmd & Status */
+ u8 res8[12];
+ u32 pescsr; /* Port Error & Status Cmd & Status */
+ u32 pccsr; /* Port Control Cmd & Status */
+ u8 res9[65184];
+ u32 cr; /* Port Control Cmd & Status */
+ u8 res10[12];
+ u32 pcr; /* Port Configuration */
+ u32 peir; /* Port Error Injection */
+ u8 res11[3048];
+ u32 rowtar0; /* RIO Outbound Window Translation Addr 0 */
+ u8 res12[12];
+ u32 rowar0; /* RIO Outbound Attrs 0 */
+ u8 res13[12];
+ u32 rowtar1; /* RIO Outbound Window Translation Addr 1 */
+ u8 res14[4];
+ u32 rowbar1; /* RIO Outbound Window Base Addr 1 */
+ u8 res15[4];
+ u32 rowar1; /* RIO Outbound Attrs 1 */
+ u8 res16[12];
+ u32 rowtar2; /* RIO Outbound Window Translation Addr 2 */
+ u8 res17[4];
+ u32 rowbar2; /* RIO Outbound Window Base Addr 2 */
+ u8 res18[4];
+ u32 rowar2; /* RIO Outbound Attrs 2 */
+ u8 res19[12];
+ u32 rowtar3; /* RIO Outbound Window Translation Addr 3 */
+ u8 res20[4];
+ u32 rowbar3; /* RIO Outbound Window Base Addr 3 */
+ u8 res21[4];
+ u32 rowar3; /* RIO Outbound Attrs 3 */
+ u8 res22[12];
+ u32 rowtar4; /* RIO Outbound Window Translation Addr 4 */
+ u8 res23[4];
+ u32 rowbar4; /* RIO Outbound Window Base Addr 4 */
+ u8 res24[4];
+ u32 rowar4; /* RIO Outbound Attrs 4 */
+ u8 res25[12];
+ u32 rowtar5; /* RIO Outbound Window Translation Addr 5 */
+ u8 res26[4];
+ u32 rowbar5; /* RIO Outbound Window Base Addr 5 */
+ u8 res27[4];
+ u32 rowar5; /* RIO Outbound Attrs 5 */
+ u8 res28[12];
+ u32 rowtar6; /* RIO Outbound Window Translation Addr 6 */
+ u8 res29[4];
+ u32 rowbar6; /* RIO Outbound Window Base Addr 6 */
+ u8 res30[4];
+ u32 rowar6; /* RIO Outbound Attrs 6 */
+ u8 res31[12];
+ u32 rowtar7; /* RIO Outbound Window Translation Addr 7 */
+ u8 res32[4];
+ u32 rowbar7; /* RIO Outbound Window Base Addr 7 */
+ u8 res33[4];
+ u32 rowar7; /* RIO Outbound Attrs 7 */
+ u8 res34[12];
+ u32 rowtar8; /* RIO Outbound Window Translation Addr 8 */
+ u8 res35[4];
+ u32 rowbar8; /* RIO Outbound Window Base Addr 8 */
+ u8 res36[4];
+ u32 rowar8; /* RIO Outbound Attrs 8 */
+ u8 res37[76];
+ u32 riwtar4; /* RIO Inbound Window Translation Addr 4 */
+ u8 res38[4];
+ u32 riwbar4; /* RIO Inbound Window Base Addr 4 */
+ u8 res39[4];
+ u32 riwar4; /* RIO Inbound Attrs 4 */
+ u8 res40[12];
+ u32 riwtar3; /* RIO Inbound Window Translation Addr 3 */
+ u8 res41[4];
+ u32 riwbar3; /* RIO Inbound Window Base Addr 3 */
+ u8 res42[4];
+ u32 riwar3; /* RIO Inbound Attrs 3 */
+ u8 res43[12];
+ u32 riwtar2; /* RIO Inbound Window Translation Addr 2 */
+ u8 res44[4];
+ u32 riwbar2; /* RIO Inbound Window Base Addr 2 */
+ u8 res45[4];
+ u32 riwar2; /* RIO Inbound Attrs 2 */
+ u8 res46[12];
+ u32 riwtar1; /* RIO Inbound Window Translation Addr 1 */
+ u8 res47[4];
+ u32 riwbar1; /* RIO Inbound Window Base Addr 1 */
+ u8 res48[4];
+ u32 riwar1; /* RIO Inbound Attrs 1 */
+ u8 res49[12];
+ u32 riwtar0; /* RIO Inbound Window Translation Addr 0 */
+ u8 res50[12];
+ u32 riwar0; /* RIO Inbound Attrs 0 */
+ u8 res51[12];
+ u32 pnfedr; /* Port Notification/Fatal Error Detect */
+ u32 pnfedir; /* Port Notification/Fatal Error Detect */
+ u32 pnfeier; /* Port Notification/Fatal Error IRQ Enable */
+ u32 pecr; /* Port Error Control */
+ u32 pepcsr0; /* Port Error Packet/Control Symbol 0 */
+ u32 pepr1; /* Port Error Packet 1 */
+ u32 pepr2; /* Port Error Packet 2 */
+ u8 res52[4];
+ u32 predr; /* Port Recoverable Error Detect */
+ u8 res53[4];
+ u32 pertr; /* Port Error Recovery Threshold */
+ u32 prtr; /* Port Retry Threshold */
+ u8 res54[464];
+ u32 omr; /* Outbound Mode */
+ u32 osr; /* Outbound Status */
+ u32 eodqtpar; /* Extended Outbound Desc Queue Tail Ptr Addr */
+ u32 odqtpar; /* Outbound Desc Queue Tail Ptr Addr */
+ u32 eosar; /* Extended Outbound Unit Source Addr */
+ u32 osar; /* Outbound Unit Source Addr */
+ u32 odpr; /* Outbound Destination Port */
+ u32 odatr; /* Outbound Destination Attrs */
+ u32 odcr; /* Outbound Doubleword Count */
+ u32 eodqhpar; /* Extended Outbound Desc Queue Head Ptr Addr */
+ u32 odqhpar; /* Outbound Desc Queue Head Ptr Addr */
+ u8 res55[52];
+ u32 imr; /* Outbound Mode */
+ u32 isr; /* Inbound Status */
+ u32 eidqtpar; /* Extended Inbound Desc Queue Tail Ptr Addr */
+ u32 idqtpar; /* Inbound Desc Queue Tail Ptr Addr */
+ u32 eifqhpar; /* Extended Inbound Frame Queue Head Ptr Addr */
+ u32 ifqhpar; /* Inbound Frame Queue Head Ptr Addr */
+ u8 res56[1000];
+ u32 dmr; /* Doorbell Mode */
+ u32 dsr; /* Doorbell Status */
+ u32 edqtpar; /* Extended Doorbell Queue Tail Ptr Addr */
+ u32 dqtpar; /* Doorbell Queue Tail Ptr Addr */
+ u32 edqhpar; /* Extended Doorbell Queue Head Ptr Addr */
+ u32 dqhpar; /* Doorbell Queue Head Ptr Addr */
+ u8 res57[104];
+ u32 pwmr; /* Port-Write Mode */
+ u32 pwsr; /* Port-Write Status */
+ u32 epwqbar; /* Extended Port-Write Queue Base Addr */
+ u32 pwqbar; /* Port-Write Queue Base Addr */
+ u8 res58[60176];
} ccsr_rio_t;
-/* Quick Engine Block Pin Muxing Registers (0xe_0100 - 0xe_01bf) */
+/* Quick Engine Block Pin Muxing Registers */
typedef struct par_io {
- uint cpodr; /* 0x100 */
- uint cpdat; /* 0x104 */
- uint cpdir1; /* 0x108 */
- uint cpdir2; /* 0x10c */
- uint cppar1; /* 0x110 */
- uint cppar2; /* 0x114 */
- char res[8];
-}par_io_t;
+ u32 cpodr;
+ u32 cpdat;
+ u32 cpdir1;
+ u32 cpdir2;
+ u32 cppar1;
+ u32 cppar2;
+ u8 res[8];
+} par_io_t;
-/*
- * Global Utilities Register Block(0xe_0000-0xf_ffff)
- */
+/* Global Utilities Block */
#ifdef CONFIG_FSL_CORENET
typedef struct ccsr_gur {
- u32 porsr1; /* 0xe0000 - POR status register */
- u8 res1[28]; /* 0xe0004 - 0xe001c Reserved: PORSRn */
- u32 gpporcr1; /* 0xe0020 - General-purpose POR configuration register */
+ u32 porsr1; /* POR status */
+ u8 res1[28];
+ u32 gpporcr1; /* General-purpose POR configuration */
u8 res2[12];
- u32 gpiocr; /* 0xe0030 - GPIO control register */
+ u32 gpiocr; /* GPIO control */
u8 res3[12];
- u32 gpoutdr; /* 0xe0040 - General-purpose output data register */
+ u32 gpoutdr; /* General-purpose output data */
u8 res4[12];
- u32 gpindr; /* 0xe0050 - General-purpose input data register */
+ u32 gpindr; /* General-purpose input data */
u8 res5[12];
- u32 pmuxcr; /* 0xe0060 - Alternate function signal multiplex control */
+ u32 pmuxcr; /* Alt function signal multiplex control */
u8 res6[12];
- u32 devdisr; /* 0xe0070 - Device disable control */
+ u32 devdisr; /* Device disable control */
#define FSL_CORENET_DEVDISR_PCIE1 0x80000000
#define FSL_CORENET_DEVDISR_PCIE2 0x40000000
#define FSL_CORENET_DEVDISR_PCIE3 0x20000000
#define FSL_CORENET_DEVDISR_DUART1 0x00000002
#define FSL_CORENET_DEVDISR_DUART2 0x00000001
u8 res7[12];
- u32 powmgtcsr; /* 0xe0080 - Power management status and control register */
+ u32 powmgtcsr; /* Power management status & control */
u8 res8[12];
- u32 coredisru; /* 0xe0090 - uppper portion for support of 64 cores */
- u32 coredisrl; /* 0xe0094 - lower portion for support of 64 cores */
+ u32 coredisru; /* uppper portion for support of 64 cores */
+ u32 coredisrl; /* lower portion for support of 64 cores */
u8 res9[8];
- u32 pvr; /* 0xe00a0 - Processor version register */
- u32 svr; /* 0xe00a4 - System version register */
+ u32 pvr; /* Processor version */
+ u32 svr; /* System version */
u8 res10[8];
- u32 rstcr; /* 0xe00b0 - Reset control register */
- u32 rstrqpblsr; /* 0xe00b4 - Reset request preboot loader status register */
+ u32 rstcr; /* Reset control */
+ u32 rstrqpblsr; /* Reset request preboot loader status */
u8 res11[8];
- u32 rstrqmr1; /* 0xe00c0 - Reset request mask register */
- u8 res12[4]; /* Reserved: RSTRQMR2 */
- u32 rstrqsr1; /* 0xe00c8 - Reset request status register */
- u8 res13[4]; /* Reserved: RSTRQSR2 */
- u8 res14[4]; /* Reserved: RSTRQWDTMRU */
- u32 rstrqwdtmrl; /* 0xe00d4 - Reset request WDT mask register */
- u8 res15[4]; /* Reserved: RSTRQWDTSRU */
- u32 rstrqwdtsrl; /* 0xe00dc - Reset request WDT status register */
- u8 res16[4]; /* Reserved: BRRU max total of 2 for up to 64 cores */
- u32 brrl; /* 0xe00e4 Boot release register */
+ u32 rstrqmr1; /* Reset request mask */
+ u8 res12[4];
+ u32 rstrqsr1; /* Reset request status */
+ u8 res13[4];
+ u8 res14[4];
+ u32 rstrqwdtmrl; /* Reset request WDT mask */
+ u8 res15[4];
+ u32 rstrqwdtsrl; /* Reset request WDT status */
+ u8 res16[4];
+ u32 brrl; /* Boot release */
u8 res17[24];
- u32 rcwsr[16]; /* 0xe0100 - 0xe013c: Reset control word status register */
+ u32 rcwsr[16]; /* Reset control word status */
#define FSL_CORENET_RCWSR4_SRDS_PRTCL 0xfc000000
#define FSL_CORENET_RCWSR5_DDR_SYNC 0x00008000
#define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 15
#define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT 0x00400000
#define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000
#define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000
- u8 res18[192]; /* Reserved: RCWSRn (max total of 64)*/
- u32 scratchrw[4]; /* 0xe0200 - 0xe020c: Scratch Read/Write register */
- u8 res19[240]; /* Reserved: SCRATCHRWn (max total of 64)*/
- u32 scratchw1r[4]; /* 0xe0300 - 0xe030c: Scratch Read register (Write once) */
- u8 res20[240]; /* Reserved: SCRATCHW1Rn (max total of 64)*/
- u32 scrtsr[8]; /* 0xe0400 - 0xe041c: Core reset status register */
- u8 res21[224]; /* Reserved: CRSTSRn (max total of 64 for up to 64 cores)*/
- u32 pex1liodnr; /* 0xe0500 PCI Express 1 Logical I/O Device Number register*/
- u32 pex2liodnr; /* 0xe0504 PCI Express 2 Logical I/O Device Number register*/
- u32 pex3liodnr; /* 0xe0508 PCI Express 3 Logical I/O Device Number register*/
- u32 pex4liodnr; /* 0xe050c PCI Express 4 Logical I/O Device Number register*/
- u32 rio1liodnr; /* 0xe0510 RIO 1 Logical I/O Device Number register*/
- u32 rio2liodnr; /* 0xe0514 RIO 2 Logical I/O Device Number register*/
- u32 rio3liodnr; /* 0xe0518 RIO 3 Logical I/O Device Number register*/
- u32 rio4liodnr; /* 0xe051c RIO 4 Logical I/O Device Number register*/
- u32 usb1liodnr; /* 0xe0520 USB 1 Logical I/O Device Number register*/
- u32 usb2liodnr; /* 0xe0524 USB 2 Logical I/O Device Number register*/
- u32 usb3liodnr; /* 0xe0528 USB 3 Logical I/O Device Number register*/
- u32 usb4liodnr; /* 0xe052c USB 4 Logical I/O Device Number register*/
- u32 sdmmc1liodnr; /* 0xe0530 SD/MMC 1 Logical I/O Device Number register*/
- u32 sdmmc2liodnr; /* 0xe0534 SD/MMC 2 Logical I/O Device Number register*/
- u32 sdmmc3liodnr; /* 0xe0538 SD/MMC 3 Logical I/O Device Number register*/
- u32 sdmmc4liodnr; /* 0xe053c SD/MMC 4 Logical I/O Device Number register*/
- u32 rmuliodnr; /* 0xe0540 RIO Message Unit Logical I/O Device Number register*/
- u32 rduliodnr; /* 0xe0544 RIO Doorbell Unit Logical I/O Device Number register*/
- u32 rpwuliodnr; /* 0xe0548 RIO Port Write Unit Logical I/O Device Number register*/
- u8 res22[52]; /* Reserved: for future LIODN register expansion */
- u32 dma1liodnr; /* 0xe0580 DMA 1 Logical I/O Device Number register*/
- u32 dma2liodnr; /* 0xe0584 DMA 2 Logical I/O Device Number register*/
- u32 dma3liodnr; /* 0xe0588 DMA 3 Logical I/O Device Number register*/
- u32 dma4liodnr; /* 0xe058c DMA 4 Logical I/O Device Number register*/
- u8 res23[48]; /* Reserved: for future LIODN register expansion */
- u8 res24[64]; /* Reserved */
- u32 pblsr; /* 0xe0600 Preboot loader status register*/
- u32 pamubypenr; /* 0xe0604 PAMU bypass enable register*/
- u32 dmacr1; /* 0xe0608 DMA control register*/
- u8 res25[4]; /* Reserved: DMACR2 (max total of 2)*/
- u32 gensr1; /* 0xe0610 General status register*/
- u8 res26[12]; /* Reserved: GENSRn (max total of 4)*/
- u32 gencr1; /* 0xe0620 General control register*/
- u8 res27[12]; /* Reserved: GENCRn (max total of 4)*/
- u8 res28[4]; /* Reserved: CGENSRU (upper portion for support of 64 cores) */
- u32 cgensrl; /* 0xe0634 Core general status register*/
- u8 res29[8]; /* Reserved */
- u8 res30[4]; /* Reserved: CGENCRU (upper portion for support of 64 cores) */
- u32 cgencrl; /* 0xe0634 Core general control register*/
- u8 res31[184]; /* Reserved 0xe0648 - 0xe06fc */
- u32 sriopstecr; /* 0xe0700 SRIO prescaler timer enable control register*/
- u8 res32[2300]; /* Reserved 0xe0704 - 0xe0ffc */
+ u8 res18[192];
+ u32 scratchrw[4]; /* Scratch Read/Write */
+ u8 res19[240];
+ u32 scratchw1r[4]; /* Scratch Read (Write once) */
+ u8 res20[240];
+ u32 scrtsr[8]; /* Core reset status */
+ u8 res21[224];
+ u32 pex1liodnr; /* PCI Express 1 LIODN */
+ u32 pex2liodnr; /* PCI Express 2 LIODN */
+ u32 pex3liodnr; /* PCI Express 3 LIODN */
+ u32 pex4liodnr; /* PCI Express 4 LIODN */
+ u32 rio1liodnr; /* RIO 1 LIODN */
+ u32 rio2liodnr; /* RIO 2 LIODN */
+ u32 rio3liodnr; /* RIO 3 LIODN */
+ u32 rio4liodnr; /* RIO 4 LIODN */
+ u32 usb1liodnr; /* USB 1 LIODN */
+ u32 usb2liodnr; /* USB 2 LIODN */
+ u32 usb3liodnr; /* USB 3 LIODN */
+ u32 usb4liodnr; /* USB 4 LIODN */
+ u32 sdmmc1liodnr; /* SD/MMC 1 LIODN */
+ u32 sdmmc2liodnr; /* SD/MMC 2 LIODN */
+ u32 sdmmc3liodnr; /* SD/MMC 3 LIODN */
+ u32 sdmmc4liodnr; /* SD/MMC 4 LIODN */
+ u32 rmuliodnr; /* RIO Message Unit LIODN */
+ u32 rduliodnr; /* RIO Doorbell Unit LIODN */
+ u32 rpwuliodnr; /* RIO Port Write Unit LIODN */
+ u8 res22[52];
+ u32 dma1liodnr; /* DMA 1 LIODN */
+ u32 dma2liodnr; /* DMA 2 LIODN */
+ u32 dma3liodnr; /* DMA 3 LIODN */
+ u32 dma4liodnr; /* DMA 4 LIODN */
+ u8 res23[48];
+ u8 res24[64];
+ u32 pblsr; /* Preboot loader status */
+ u32 pamubypenr; /* PAMU bypass enable */
+ u32 dmacr1; /* DMA control */
+ u8 res25[4];
+ u32 gensr1; /* General status */
+ u8 res26[12];
+ u32 gencr1; /* General control */
+ u8 res27[12];
+ u8 res28[4];
+ u32 cgensrl; /* Core general status */
+ u8 res29[8];
+ u8 res30[4];
+ u32 cgencrl; /* Core general control */
+ u8 res31[184];
+ u32 sriopstecr; /* SRIO prescaler timer enable control */
+ u8 res32[2300];
} ccsr_gur_t;
typedef struct ccsr_clk {
- u32 clkc0csr; /* 0xe1000 - Core 0 Clock control/status register */
- u8 res1[0x1c];
- u32 clkc1csr; /* 0xe1020 - Core 1 Clock control/status register */
- u8 res2[0x1c];
- u32 clkc2csr; /* 0xe1040 - Core 2 Clock control/status register */
- u8 res3[0x1c];
- u32 clkc3csr; /* 0xe1060 - Core 3 Clock control/status register */
- u8 res4[0x1c];
- u32 clkc4csr; /* 0xe1080 - Core 4 Clock control/status register */
- u8 res5[0x1c];
- u32 clkc5csr; /* 0xe10a0 - Core 5 Clock control/status register */
- u8 res6[0x1c];
- u32 clkc6csr; /* 0xe10c0 - Core 6 Clock control/status register */
- u8 res7[0x1c];
- u32 clkc7csr; /* 0xe10e0 - Core 7 Clock control/status register */
- u8 res8[0x71c];
- u32 pllc1gsr; /* 0xe1800 - Cluster PLL 1 General Status Register */
- u8 res10[0x1c];
- u32 pllc2gsr; /* 0xe1820 - Cluster PLL 2 General Status Register */
- u8 res11[0x1c];
- u32 pllc3gsr; /* 0xe1840 - Cluster PLL 3 General Status Register */
- u8 res12[0x1c];
- u32 pllc4gsr; /* 0xe1860 - Cluster PLL 4 General Status Register */
- u8 res13[0x39c];
- u32 pllpgsr; /* 0xe1c00 - Platform PLL General Status Register */
- u8 res14[0x1c];
- u32 plldgsr; /* 0xe1c20 - DDR PLL General Status Register */
- u8 res15[0x3dc];
+ u32 clkc0csr; /* Core 0 Clock control/status */
+ u8 res1[0x1c];
+ u32 clkc1csr; /* Core 1 Clock control/status */
+ u8 res2[0x1c];
+ u32 clkc2csr; /* Core 2 Clock control/status */
+ u8 res3[0x1c];
+ u32 clkc3csr; /* Core 3 Clock control/status */
+ u8 res4[0x1c];
+ u32 clkc4csr; /* Core 4 Clock control/status */
+ u8 res5[0x1c];
+ u32 clkc5csr; /* Core 5 Clock control/status */
+ u8 res6[0x1c];
+ u32 clkc6csr; /* Core 6 Clock control/status */
+ u8 res7[0x1c];
+ u32 clkc7csr; /* Core 7 Clock control/status */
+ u8 res8[0x71c];
+ u32 pllc1gsr; /* Cluster PLL 1 General Status */
+ u8 res10[0x1c];
+ u32 pllc2gsr; /* Cluster PLL 2 General Status */
+ u8 res11[0x1c];
+ u32 pllc3gsr; /* Cluster PLL 3 General Status */
+ u8 res12[0x1c];
+ u32 pllc4gsr; /* Cluster PLL 4 General Status */
+ u8 res13[0x39c];
+ u32 pllpgsr; /* Platform PLL General Status */
+ u8 res14[0x1c];
+ u32 plldgsr; /* DDR PLL General Status */
+ u8 res15[0x3dc];
} ccsr_clk_t;
typedef struct ccsr_rcpm {
- u8 res1[4]; /* 0xe2000 - Reserved */
- u32 cdozsrl; /* 0xe2004 - Core Doze Status Register */
- u8 res2[4]; /* 0xe2008 - Reserved */
- u32 cdozcrl; /* 0xe200c - Core Doze Control Register */
- u8 res3[4]; /* 0xe2010 - Reserved */
- u32 cnapsrl; /* 0xe2014 - Core Nap Status Register */
- u8 res4[4]; /* 0xe2018 - Reserved */
- u32 cnapcrl; /* 0xe201c - Core Nap Control Register */
- u8 res5[4]; /* 0xe2020 - Reserved */
- u32 cdozpsrl; /* 0xe2024 - Core Doze Previous Status Register */
- u8 res6[4]; /* 0xe2028 - Reserved */
- u32 cdozpcrl; /* 0xe202c - Core Doze Previous Control Register */
- u8 res7[4]; /* 0xe2030 - Reserved */
- u32 cwaitsrl; /* 0xe2034 - Core Wait Status Register */
- u8 res8[8]; /* Reserved */
- u32 powmgtcsr; /* 0xe2040 - Power Mangement Control & Status Register */
- u8 res9[12]; /* Reserved */
- u32 ippdexpcr0; /* 0xe2050 - IP Powerdown Exception Control Register 0 */
- u8 res10[12]; /* Reserved */
- u8 res11[4]; /* Reserved */
- u32 cpmimrl; /* 0xe2064 - Core Power Management Interrupt Masking Register */
- u8 res12[4]; /* Reserved */
- u32 cpmcimrl; /* 0xe206c - Core Power Management Critical Interrupt Masking Register */
- u8 res13[4]; /* Reserved */
- u32 cpmmcimrl; /* 0xe2074 - Core Power Management Machine Check Interrupt Masking Register */
- u8 res14[4]; /* Reserved */
- u32 cpmnmimrl; /* 0xe207c - Core Power Management NMI Masking Register */
- u8 res15[4]; /* Reserved */
- u32 ctbenrl; /* 0xe2084 - Core Time Base Enable Register */
- u8 res16[4]; /* Reserved */
- u32 ctbclkselrl; /* 0xe208c - Core Time Base Clock Select Register */
- u8 res17[4]; /* Reserved */
- u32 ctbhltcrl; /* 0xe2094 - Core Time Base Halt Control Register */
+ u8 res1[4];
+ u32 cdozsrl; /* Core Doze Status */
+ u8 res2[4];
+ u32 cdozcrl; /* Core Doze Control */
+ u8 res3[4];
+ u32 cnapsrl; /* Core Nap Status */
+ u8 res4[4];
+ u32 cnapcrl; /* Core Nap Control */
+ u8 res5[4];
+ u32 cdozpsrl; /* Core Doze Previous Status */
+ u8 res6[4];
+ u32 cdozpcrl; /* Core Doze Previous Control */
+ u8 res7[4];
+ u32 cwaitsrl; /* Core Wait Status */
+ u8 res8[8];
+ u32 powmgtcsr; /* Power Mangement Control & Status */
+ u8 res9[12];
+ u32 ippdexpcr0; /* IP Powerdown Exception Control 0 */
+ u8 res10[12];
+ u8 res11[4];
+ u32 cpmimrl; /* Core PM IRQ Masking */
+ u8 res12[4];
+ u32 cpmcimrl; /* Core PM Critical IRQ Masking */
+ u8 res13[4];
+ u32 cpmmcimrl; /* Core PM Machine Check IRQ Masking */
+ u8 res14[4];
+ u32 cpmnmimrl; /* Core PM NMI Masking */
+ u8 res15[4];
+ u32 ctbenrl; /* Core Time Base Enable */
+ u8 res16[4];
+ u32 ctbclkselrl; /* Core Time Base Clock Select */
+ u8 res17[4];
+ u32 ctbhltcrl; /* Core Time Base Halt Control */
u8 res18[0xf68];
} ccsr_rcpm_t;
#else
typedef struct ccsr_gur {
- uint porpllsr; /* 0xe0000 - POR PLL ratio status register */
+ u32 porpllsr; /* POR PLL ratio status */
#ifdef CONFIG_MPC8536
#define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000
#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25
#define MPC85xx_PORPLLSR_QE_RATIO 0x3e000000
#define MPC85xx_PORPLLSR_QE_RATIO_SHIFT 25
#define MPC85xx_PORPLLSR_PLAT_RATIO 0x0000003e
-#define MPC85xx_PORPLLSR_PLAT_RATIO_SHIFT 1
- uint porbmsr; /* 0xe0004 - POR boot mode status register */
+#define MPC85xx_PORPLLSR_PLAT_RATIO_SHIFT 1
+ u32 porbmsr; /* POR boot mode status */
#define MPC85xx_PORBMSR_HA 0x00070000
#define MPC85xx_PORBMSR_HA_SHIFT 16
- uint porimpscr; /* 0xe0008 - POR I/O impedance status and control register */
- uint pordevsr; /* 0xe000c - POR I/O device status regsiter */
+ u32 porimpscr; /* POR I/O impedance status & control */
+ u32 pordevsr; /* POR I/O device status regsiter */
#define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000
#define MPC85xx_PORDEVSR_SGMII2_DIS 0x10000000
#define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000
#define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000
-#define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000
+#define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000
#define MPC85xx_PORDEVSR_PCI1 0x00800000
#define MPC85xx_PORDEVSR_IO_SEL 0x00780000
#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19
#define MPC85xx_PORDEVSR_DRAM_RTYPE 0x00000060
#define MPC85xx_PORDEVSR_RIO_CTLS 0x00000008
#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007
- uint pordbgmsr; /* 0xe0010 - POR debug mode status register */
- uint pordevsr2; /* 0xe0014 - POR I/O device status regsiter 2 */
+ u32 pordbgmsr; /* POR debug mode status */
+ u32 pordevsr2; /* POR I/O device status 2 */
/* The 8544 RM says this is bit 26, but it's really bit 24 */
#define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080
- char res1[8];
- uint gpporcr; /* 0xe0020 - General-purpose POR configuration register */
- char res2[12];
- uint gpiocr; /* 0xe0030 - GPIO control register */
- char res3[12];
+ u8 res1[8];
+ u32 gpporcr; /* General-purpose POR configuration */
+ u8 res2[12];
+ u32 gpiocr; /* GPIO control */
+ u8 res3[12];
#if defined(CONFIG_MPC8569)
- uint plppar1;
- /* 0xe0040 - Platform port pin assignment register 1 */
- uint plppar2;
- /* 0xe0044 - Platform port pin assignment register 2 */
- uint plpdir1;
- /* 0xe0048 - Platform port pin direction register 1 */
- uint plpdir2;
- /* 0xe004c - Platform port pin direction register 2 */
+ u32 plppar1; /* Platform port pin assignment 1 */
+ u32 plppar2; /* Platform port pin assignment 2 */
+ u32 plpdir1; /* Platform port pin direction 1 */
+ u32 plpdir2; /* Platform port pin direction 2 */
#else
- uint gpoutdr; /* 0xe0040 - General-purpose output data register */
- char res4[12];
+ u32 gpoutdr; /* General-purpose output data */
+ u8 res4[12];
#endif
- uint gpindr; /* 0xe0050 - General-purpose input data register */
- char res5[12];
- uint pmuxcr; /* 0xe0060 - Alternate function signal multiplex control */
+ u32 gpindr; /* General-purpose input data */
+ u8 res5[12];
+ u32 pmuxcr; /* Alt. function signal multiplex control */
#define MPC85xx_PMUXCR_SD_DATA 0x80000000
#define MPC85xx_PMUXCR_SDHC_CD 0x40000000
#define MPC85xx_PMUXCR_SDHC_WP 0x20000000
- char res6[12];
- uint devdisr; /* 0xe0070 - Device disable control */
+ u8 res6[12];
+ u32 devdisr; /* Device disable control */
#define MPC85xx_DEVDISR_PCI1 0x80000000
#define MPC85xx_DEVDISR_PCI2 0x40000000
#define MPC85xx_DEVDISR_PCIE 0x20000000
#define MPC85xx_DEVDISR_TSEC4 0x00000010
#define MPC85xx_DEVDISR_I2C 0x00000004
#define MPC85xx_DEVDISR_DUART 0x00000002
- char res7[12];
- uint powmgtcsr; /* 0xe0080 - Power management status and control register */
- char res8[12];
- uint mcpsumr; /* 0xe0090 - Machine check summary register */
- char res9[12];
- uint pvr; /* 0xe00a0 - Processor version register */
- uint svr; /* 0xe00a4 - System version register */
- char res10a[8];
- uint rstcr; /* 0xe00b0 - Reset control register */
+ u8 res7[12];
+ u32 powmgtcsr; /* Power management status & control */
+ u8 res8[12];
+ u32 mcpsumr; /* Machine check summary */
+ u8 res9[12];
+ u32 pvr; /* Processor version */
+ u32 svr; /* System version */
+ u8 res10a[8];
+ u32 rstcr; /* Reset control */
#if defined(CONFIG_MPC8568)||defined(CONFIG_MPC8569)
- char res10b[76];
- par_io_t qe_par_io[7]; /* 0xe0100 - 0xe01bf */
- char res10c[3136];
+ u8 res10b[76];
+ par_io_t qe_par_io[7];
+ u8 res10c[3136];
#else
- char res10b[3404];
+ u8 res10b[3404];
#endif
- uint clkocr; /* 0xe0e00 - Clock out select register */
- char res11[12];
- uint ddrdllcr; /* 0xe0e10 - DDR DLL control register */
- char res12[12];
- uint lbcdllcr; /* 0xe0e20 - LBC DLL control register */
- char res13[248];
- uint lbiuiplldcr0; /* 0xe0f1c -- LBIU PLL Debug Reg 0 */
- uint lbiuiplldcr1; /* 0xe0f20 -- LBIU PLL Debug Reg 1 */
- uint ddrioovcr; /* 0xe0f24 - DDR IO Override Control */
- uint tsec12ioovcr; /* 0xe0f28 - eTSEC 1/2 IO override control */
- uint tsec34ioovcr; /* 0xe0f2c - eTSEC 3/4 IO override control */
- char res15[61648]; /* 0xe0f30 to 0xefffff */
+ u32 clkocr; /* Clock out select */
+ u8 res11[12];
+ u32 ddrdllcr; /* DDR DLL control */
+ u8 res12[12];
+ u32 lbcdllcr; /* LBC DLL control */
+ u8 res13[248];
+ u32 lbiuiplldcr0; /* LBIU PLL Debug Reg 0 */
+ u32 lbiuiplldcr1; /* LBIU PLL Debug Reg 1 */
+ u32 ddrioovcr; /* DDR IO Override Control */
+ u32 tsec12ioovcr; /* eTSEC 1/2 IO override control */
+ u32 tsec34ioovcr; /* eTSEC 3/4 IO override control */
+ u8 res15[61648];
} ccsr_gur_t;
#endif
#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x114000
#define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x124000
#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000
-#define CONFIG_SYS_MPC85xx_QMAN_OFFSET 0x318000
-#define CONFIG_SYS_MPC85xx_BMAN_OFFSET 0x31a000
+#define CONFIG_SYS_FSL_CORENET_QMAN_OFFSET 0x318000
+#define CONFIG_SYS_FSL_CORENET_BMAN_OFFSET 0x31a000
#else
#define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000
#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000
#define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x19000
#define CONFIG_SYS_MPC85xx_L2_OFFSET 0x20000
#define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x21000
+#define CONFIG_SYS_MPC85xx_USB_OFFSET 0x22000
#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000
#define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100
#define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000
#define CONFIG_SYS_MPC85xx_PIC_OFFSET 0x40000
#define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000
-#define CONFIG_SYS_MPC85xx_QMAN_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_QMAN_OFFSET)
-#define CONFIG_SYS_MPC85xx_BMAN_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_BMAN_OFFSET)
-#define CONFIG_SYS_MPC85xx_GUTS_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GUTS_OFFSET)
-#define CONFIG_SYS_FSL_CORENET_CCM_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_CCM_OFFSET)
-#define CONFIG_SYS_FSL_CORENET_CLK_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_CLK_OFFSET)
-#define CONFIG_SYS_FSL_CORENET_RCPM_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RCPM_OFFSET)
-#define CONFIG_SYS_MPC85xx_ECM_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
-#define CONFIG_SYS_MPC85xx_LBC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
-#define CONFIG_SYS_MPC85xx_ESPI_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET)
-#define CONFIG_SYS_MPC85xx_PCIX_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX_OFFSET)
-#define CONFIG_SYS_MPC85xx_PCIX2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX2_OFFSET)
-#define CONFIG_SYS_MPC85xx_GPIO_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GPIO_OFFSET)
-#define CONFIG_SYS_MPC85xx_SATA1_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA1_OFFSET)
-#define CONFIG_SYS_MPC85xx_SATA2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA2_OFFSET)
-#define CONFIG_SYS_MPC85xx_L2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_L2_OFFSET)
-#define CONFIG_SYS_MPC85xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DMA_OFFSET)
-#define CONFIG_SYS_MPC85xx_ESDHC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESDHC_OFFSET)
-#define CONFIG_SYS_MPC85xx_PIC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PIC_OFFSET)
-#define CONFIG_SYS_MPC85xx_CPM_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_CPM_OFFSET)
-#define CONFIG_SYS_MPC85xx_SERDES1_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
-#define CONFIG_SYS_MPC85xx_SERDES2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
-#define CONFIG_SYS_MPC85xx_USB_OFFSET 0x22000
+#define CONFIG_SYS_FSL_CORENET_QMAN_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_QMAN_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_BMAN_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_BMAN_OFFSET)
+#define CONFIG_SYS_MPC85xx_GUTS_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GUTS_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_CCM_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_CCM_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_CLK_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_CLK_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_RCPM_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RCPM_OFFSET)
+#define CONFIG_SYS_MPC85xx_ECM_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET)
+#define CONFIG_SYS_MPC85xx_DDR_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET)
+#define CONFIG_SYS_MPC85xx_DDR2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
+#define CONFIG_SYS_MPC85xx_LBC_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
+#define CONFIG_SYS_MPC85xx_ESPI_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET)
+#define CONFIG_SYS_MPC85xx_PCIX_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX_OFFSET)
+#define CONFIG_SYS_MPC85xx_PCIX2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX2_OFFSET)
+#define CONFIG_SYS_MPC85xx_GPIO_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GPIO_OFFSET)
+#define CONFIG_SYS_MPC85xx_SATA1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA1_OFFSET)
+#define CONFIG_SYS_MPC85xx_SATA2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA2_OFFSET)
+#define CONFIG_SYS_MPC85xx_L2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_L2_OFFSET)
+#define CONFIG_SYS_MPC85xx_DMA_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DMA_OFFSET)
+#define CONFIG_SYS_MPC85xx_ESDHC_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESDHC_OFFSET)
+#define CONFIG_SYS_MPC85xx_PIC_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PIC_OFFSET)
+#define CONFIG_SYS_MPC85xx_CPM_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_CPM_OFFSET)
+#define CONFIG_SYS_MPC85xx_SERDES1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
+#define CONFIG_SYS_MPC85xx_SERDES2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
#define CONFIG_SYS_MPC85xx_USB_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
#endif /*__IMMAP_85xx__*/
* SDRAM Controller
*/
-/*
- * XXX - ToDo: Revisit file to change all these lower case defines into
- * upper case. Also needs to be done in the controller setup code too
- * of course. sr, 2008-06-02
- */
#ifndef CONFIG_405EP
-#define mem_besra 0x00 /* bus error syndrome reg a */
-#define mem_besrsa 0x04 /* bus error syndrome reg set a */
-#define mem_besrb 0x08 /* bus error syndrome reg b */
-#define mem_besrsb 0x0c /* bus error syndrome reg set b */
-#define mem_bear 0x10 /* bus error address reg */
+#define SDRAM0_BESR0 0x00 /* bus error syndrome reg a */
+#define SDRAM0_BESRS0 0x04 /* bus error syndrome reg set a */
+#define SDRAM0_BESR1 0x08 /* bus error syndrome reg b */
+#define SDRAM0_BESRS1 0x0c /* bus error syndrome reg set b */
+#define SDRAM0_BEAR 0x10 /* bus error address reg */
#endif
-#define mem_mcopt1 0x20 /* memory controller options 1 */
-#define mem_status 0x24 /* memory status */
-#define mem_rtr 0x30 /* refresh timer reg */
-#define mem_pmit 0x34 /* power management idle timer */
-#define mem_mb0cf 0x40 /* memory bank 0 configuration */
-#define mem_mb1cf 0x44 /* memory bank 1 configuration */
+#define SDRAM0_CFG 0x20 /* memory controller options 1 */
+#define SDRAM0_STATUS 0x24 /* memory status */
+#define SDRAM0_RTR 0x30 /* refresh timer reg */
+#define SDRAM0_PMIT 0x34 /* power management idle timer */
+#define SDRAM0_B0CR 0x40 /* memory bank 0 configuration */
+#define SDRAM0_B1CR 0x44 /* memory bank 1 configuration */
#ifndef CONFIG_405EP
-#define mem_mb2cf 0x48 /* memory bank 2 configuration */
-#define mem_mb3cf 0x4c /* memory bank 3 configuration */
+#define SDRAM0_B2CR 0x48 /* memory bank 2 configuration */
+#define SDRAM0_B3CR 0x4c /* memory bank 3 configuration */
#endif
-#define mem_sdtr1 0x80 /* timing reg 1 */
+#define SDRAM0_TR 0x80 /* timing reg 1 */
#ifndef CONFIG_405EP
-#define mem_ecccf 0x94 /* ECC configuration */
-#define mem_eccerr 0x98 /* ECC error status */
+#define SDRAM0_ECCCFG 0x94 /* ECC configuration */
+#define SDRAM0_ECCESR 0x98 /* ECC error status */
#endif
#endif /* CONFIG_SDRAM_PPC4xx_IBM_SDRAM */
#define SDRAM_CFG0 0x20 /* memory controller options 0 */
#define SDRAM_CFG1 0x21 /* memory controller options 1 */
-/*
- * XXX - ToDo: Revisit file to change all these lower case defines into
- * upper case. Also needs to be done in the controller setup code too
- * of course. sr, 2008-06-02
- */
-#define mem_besr0_clr 0x0000 /* bus error status reg 0 (clr) */
-#define mem_besr0_set 0x0004 /* bus error status reg 0 (set) */
-#define mem_besr1_clr 0x0008 /* bus error status reg 1 (clr) */
-#define mem_besr1_set 0x000c /* bus error status reg 1 (set) */
-#define mem_bear 0x0010 /* bus error address reg */
-#define mem_mirq_clr 0x0011 /* bus master interrupt (clr) */
-#define mem_mirq_set 0x0012 /* bus master interrupt (set) */
-#define mem_slio 0x0018 /* ddr sdram slave interface options */
-#define mem_cfg0 0x0020 /* ddr sdram options 0 */
-#define mem_cfg1 0x0021 /* ddr sdram options 1 */
-#define mem_devopt 0x0022 /* ddr sdram device options */
-#define mem_mcsts 0x0024 /* memory controller status */
-#define mem_rtr 0x0030 /* refresh timer register */
-#define mem_pmit 0x0034 /* power management idle timer */
-#define mem_uabba 0x0038 /* plb UABus base address */
-#define mem_b0cr 0x0040 /* ddr sdram bank 0 configuration */
-#define mem_b1cr 0x0044 /* ddr sdram bank 1 configuration */
-#define mem_b2cr 0x0048 /* ddr sdram bank 2 configuration */
-#define mem_b3cr 0x004c /* ddr sdram bank 3 configuration */
-#define mem_tr0 0x0080 /* sdram timing register 0 */
-#define mem_tr1 0x0081 /* sdram timing register 1 */
-#define mem_clktr 0x0082 /* ddr clock timing register */
-#define mem_wddctr 0x0083 /* write data/dm/dqs clock timing reg */
-#define mem_dlycal 0x0084 /* delay line calibration register */
-#define mem_eccesr 0x0098 /* ECC error status */
+#define SDRAM0_BEAR 0x0010 /* bus error address reg */
+#define SDRAM0_SLIO 0x0018 /* ddr sdram slave interface options */
+#define SDRAM0_CFG0 0x0020 /* ddr sdram options 0 */
+#define SDRAM0_CFG1 0x0021 /* ddr sdram options 1 */
+#define SDRAM0_DEVOPT 0x0022 /* ddr sdram device options */
+#define SDRAM0_MCSTS 0x0024 /* memory controller status */
+#define SDRAM0_RTR 0x0030 /* refresh timer register */
+#define SDRAM0_PMIT 0x0034 /* power management idle timer */
+#define SDRAM0_UABBA 0x0038 /* plb UABus base address */
+#define SDRAM0_B0CR 0x0040 /* ddr sdram bank 0 configuration */
+#define SDRAM0_B1CR 0x0044 /* ddr sdram bank 1 configuration */
+#define SDRAM0_B2CR 0x0048 /* ddr sdram bank 2 configuration */
+#define SDRAM0_B3CR 0x004c /* ddr sdram bank 3 configuration */
+#define SDRAM0_TR0 0x0080 /* sdram timing register 0 */
+#define SDRAM0_TR1 0x0081 /* sdram timing register 1 */
+#define SDRAM0_CLKTR 0x0082 /* ddr clock timing register */
+#define SDRAM0_WDDCTR 0x0083 /* write data/dm/dqs clock timing reg */
+#define SDRAM0_DLYCAL 0x0084 /* delay line calibration register */
+#define SDRAM0_ECCESR 0x0098 /* ECC error status */
/*
* Memory Controller Options 0
/*
* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
*
- * (C) Copyright 2008
+ * (C) Copyright 2008-2009
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define UIC_MAX 1
#endif
-#define IRQ_MAX UIC_MAX * 32
+#define IRQ_MAX (UIC_MAX * 32)
/*
* UIC register
#define UIC3_DCR_BASE 0xf0
#endif
-#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */
-#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */
-#define uic0cr (UIC0_DCR_BASE+0x3) /* UIC0 critical */
-#define uic0pr (UIC0_DCR_BASE+0x4) /* UIC0 polarity */
-#define uic0tr (UIC0_DCR_BASE+0x5) /* UIC0 triggering */
-#define uic0msr (UIC0_DCR_BASE+0x6) /* UIC0 masked status */
-#define uic0vr (UIC0_DCR_BASE+0x7) /* UIC0 vector */
-#define uic0vcr (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */
-
-#define uic1sr (UIC1_DCR_BASE+0x0) /* UIC1 status */
-#define uic1er (UIC1_DCR_BASE+0x2) /* UIC1 enable */
-#define uic1cr (UIC1_DCR_BASE+0x3) /* UIC1 critical */
-#define uic1pr (UIC1_DCR_BASE+0x4) /* UIC1 polarity */
-#define uic1tr (UIC1_DCR_BASE+0x5) /* UIC1 triggering */
-#define uic1msr (UIC1_DCR_BASE+0x6) /* UIC1 masked status */
-#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
-#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
-
-#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */
-#define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */
-#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */
-#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */
-#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
-#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
-#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
-#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */
-#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
-
-#define uic3sr (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */
-#define uic3srs (UIC3_DCR_BASE+0x1) /* UIC3 status-Read Set */
-#define uic3er (UIC3_DCR_BASE+0x2) /* UIC3 enable */
-#define uic3cr (UIC3_DCR_BASE+0x3) /* UIC3 critical */
-#define uic3pr (UIC3_DCR_BASE+0x4) /* UIC3 polarity */
-#define uic3tr (UIC3_DCR_BASE+0x5) /* UIC3 triggering */
-#define uic3msr (UIC3_DCR_BASE+0x6) /* UIC3 masked status */
-#define uic3vr (UIC3_DCR_BASE+0x7) /* UIC3 vector */
-#define uic3vcr (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */
-
-/* The following is for compatibility with 405 code */
-#define uicsr uic0sr
-#define uicer uic0er
-#define uiccr uic0cr
-#define uicpr uic0pr
-#define uictr uic0tr
-#define uicmsr uic0msr
-#define uicvr uic0vr
-#define uicvcr uic0vcr
+#define UIC0SR (UIC0_DCR_BASE+0x0) /* UIC0 status */
+#define UIC0ER (UIC0_DCR_BASE+0x2) /* UIC0 enable */
+#define UIC0CR (UIC0_DCR_BASE+0x3) /* UIC0 critical */
+#define UIC0PR (UIC0_DCR_BASE+0x4) /* UIC0 polarity */
+#define UIC0TR (UIC0_DCR_BASE+0x5) /* UIC0 triggering */
+#define UIC0MSR (UIC0_DCR_BASE+0x6) /* UIC0 masked status */
+#define UIC0VR (UIC0_DCR_BASE+0x7) /* UIC0 vector */
+#define UIC0VCR (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */
+
+#define UIC1SR (UIC1_DCR_BASE+0x0) /* UIC1 status */
+#define UIC1ER (UIC1_DCR_BASE+0x2) /* UIC1 enable */
+#define UIC1CR (UIC1_DCR_BASE+0x3) /* UIC1 critical */
+#define UIC1PR (UIC1_DCR_BASE+0x4) /* UIC1 polarity */
+#define UIC1TR (UIC1_DCR_BASE+0x5) /* UIC1 triggering */
+#define UIC1MSR (UIC1_DCR_BASE+0x6) /* UIC1 masked status */
+#define UIC1VR (UIC1_DCR_BASE+0x7) /* UIC1 vector */
+#define UIC1VCR (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
+
+#define UIC2SR (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */
+#define UIC2ER (UIC2_DCR_BASE+0x2) /* UIC2 enable */
+#define UIC2CR (UIC2_DCR_BASE+0x3) /* UIC2 critical */
+#define UIC2PR (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
+#define UIC2TR (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
+#define UIC2MSR (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
+#define UIC2VR (UIC2_DCR_BASE+0x7) /* UIC2 vector */
+#define UIC2VCR (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
+
+#define UIC3SR (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */
+#define UIC3ER (UIC3_DCR_BASE+0x2) /* UIC3 enable */
+#define UIC3CR (UIC3_DCR_BASE+0x3) /* UIC3 critical */
+#define UIC3PR (UIC3_DCR_BASE+0x4) /* UIC3 polarity */
+#define UIC3TR (UIC3_DCR_BASE+0x5) /* UIC3 triggering */
+#define UIC3MSR (UIC3_DCR_BASE+0x6) /* UIC3 masked status */
+#define UIC3VR (UIC3_DCR_BASE+0x7) /* UIC3 vector */
+#define UIC3VCR (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */
/*
* Now the interrupt vector definitions. They are different for most of
/*
* Local Bus LCRR and LBCR regs
*/
-#define CONFIG_SYS_LCRR LCRR_EADC_1 | LCRR_CLKDIV_4
+#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR ( 0x00040000 /* TODO */ \
| (0xFF << LBCR_BMT_SHIFT) \
| 0xF ) /* 0x0004ff0f */
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
#define CONFIG_SYS_LBC_LBCR 0x00040000
/*
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
#define CONFIG_SYS_LBC_LBCR 0x00000000
/*
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
#define CONFIG_SYS_LBC_LBCR 0x00000000
/*
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
/*
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
#define CONFIG_SYS_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
/*
#define CONFIG_NET_MULTI 1
#endif
+#define CONFIG_HWCONFIG 1
+
/*
* QE UEC ethernet configuration
*/
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_GMII
+#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_ID
#endif
#define CONFIG_UEC_ETH2 /* GETH2 */
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_GMII
+#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_ID
#endif
/*
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
/*
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_8)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
#define CONFIG_SYS_LBC_LBCR 0x00000000
/*
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_8)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
#define CONFIG_SYS_LBC_LBCR 0x00000000
/*
#define CONFIG_PHYS_64BIT 1
#endif
+#ifdef CONFIG_MK_NAND
+#define CONFIG_NAND_U_BOOT 1
+#define CONFIG_RAMBOOT_NAND 1
+#define CONFIG_RAMBOOT_TEXT_BASE 0xf8f82000
+#endif
+
+#ifdef CONFIG_MK_SDCARD
+#define CONFIG_RAMBOOT_SDCARD 1
+#define CONFIG_RAMBOOT_TEXT_BASE 0xf8f80000
+#endif
+
+#ifdef CONFIG_MK_SPIFLASH
+#define CONFIG_RAMBOOT_SPIFLASH 1
+#define CONFIG_RAMBOOT_TEXT_BASE 0xf8f80000
+#endif
+
/* High Level Configuration Options */
#define CONFIG_BOOKE 1 /* BOOKE */
#define CONFIG_E500 1 /* BOOKE e500 family */
#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
#endif
-#define CONFIG_SYS_MEMTEST_START 0x00010000 /* skip exception vectors */
-#define CONFIG_SYS_MEMTEST_END 0x1f000000 /* skip u-boot at top of RAM */
+#define CONFIG_SYS_MEMTEST_START 0x00010000 /* skip exception vectors */
+#define CONFIG_SYS_MEMTEST_END 0x1f000000 /* skip u-boot at top of RAM */
#define CONFIG_PANIC_HANG /* do not reset board on panic */
+/*
+ * Config the L2 Cache as L2 SRAM
+ */
+#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull
+#else
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
+#endif
+#define CONFIG_SYS_L2_SIZE (512 << 10)
+#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
+
/*
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */
#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull /* physical addr of CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull /* physical addr of CCSRBAR */
#else
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
#endif
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
-#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000)
-#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0xb000)
+#if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_SYS_CCSRBAR_DEFAULT CONFIG_SYS_CCSRBAR
+#else
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#endif
+
+#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000)
+#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000)
+#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000)
+#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR + 0xb000)
/* DDR Setup */
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_SPD_BUS_NUM 1
/* These are used when DDR doesn't use SPD. */
-#define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */
+#define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F
-#define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */
+#define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */
#define CONFIG_SYS_DDR_TIMING_3 0x00000000
#define CONFIG_SYS_DDR_TIMING_0 0x00260802
#define CONFIG_SYS_DDR_TIMING_1 0x3935d322
#define CONFIG_SYS_DDR_CLK_CTRL 0x03800000
#define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
#define CONFIG_SYS_DDR_OCD_STATUS 0x00000000
-#define CONFIG_SYS_DDR_CONTROL 0xC3008000 /* Type = DDR2 */
+#define CONFIG_SYS_DDR_CONTROL 0xC3008000 /* Type = DDR2 */
#define CONFIG_SYS_DDR_CONTROL2 0x04400010
#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
#endif
-#define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V)
-#define CONFIG_SYS_OR0_PRELIM 0xf8000ff7
+#define CONFIG_FLASH_BR_PRELIM \
+ (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \
+ | BR_PS_16 | BR_V)
+#define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
-#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_BR1_PRELIM \
+ (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
+ | BR_PS_16 | BR_V)
#define CONFIG_SYS_OR1_PRELIM 0xf8000ff7
-#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \
+ CONFIG_SYS_FLASH_BASE_PHYS }
#define CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
+ || defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
+#define CONFIG_SYS_RAMBOOT
+#else
+#undef CONFIG_SYS_RAMBOOT
+#endif
+
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_EMPTY_INFO
#endif
#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
-#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */
+#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */
#define PIXIS_ID 0x0 /* Board ID at offset 0 */
#define PIXIS_VER 0x1 /* Board version at offset 1 */
#define PIXIS_VWATCH 0x24 /* Watchdog Register */
#define PIXIS_LED 0x25 /* LED Register */
+#define PIXIS_SPD_SYSCLK 0x7 /* SYSCLK option */
+
/* old pixis referenced names */
#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */
#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */
#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET \
+ (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
+#ifndef CONFIG_NAND_SPL
#define CONFIG_SYS_NAND_BASE 0xffa00000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull
#else
#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
#endif
+#else
+#define CONFIG_SYS_NAND_BASE 0xfff00000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull
+#else
+#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
+#endif
+#endif
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\
CONFIG_SYS_NAND_BASE + 0x40000, \
CONFIG_SYS_NAND_BASE + 0x80000, \
#define CONFIG_NAND_FSL_ELBC 1
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+/* NAND boot: 4K NAND loader config */
+#define CONFIG_SYS_NAND_SPL_SIZE 0x1000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR)
+#define CONFIG_SYS_NAND_U_BOOT_START \
+ (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (0)
+#define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
+
/* NAND flash config */
-#define CONFIG_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
- | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
- | BR_PS_8 /* Port Size = 8 bit */ \
- | BR_MS_FCM /* MSEL = FCM */ \
- | BR_V) /* valid */
-#define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \
- | OR_FCM_PGS /* Large Page*/ \
- | OR_FCM_CSCT \
- | OR_FCM_CST \
- | OR_FCM_CHT \
- | OR_FCM_SCY_1 \
- | OR_FCM_TRLX \
- | OR_FCM_EHTR)
-
-#define CONFIG_SYS_BR2_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */
-#define CONFIG_SYS_OR2_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
-
-#define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\
- | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
- | BR_PS_8 /* Port Size = 8 bit */ \
- | BR_MS_FCM /* MSEL = FCM */ \
- | BR_V) /* valid */
-#define CONFIG_SYS_OR4_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\
- | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
- | BR_PS_8 /* Port Size = 8 bit */ \
- | BR_MS_FCM /* MSEL = FCM */ \
- | BR_V) /* valid */
-#define CONFIG_SYS_OR5_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
-
-#define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\
- | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
- | BR_PS_8 /* Port Size = 8 bit */ \
- | BR_MS_FCM /* MSEL = FCM */ \
- | BR_V) /* valid */
-#define CONFIG_SYS_OR6_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
+#define CONFIG_NAND_BR_PRELIM \
+ (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V) /* valid */
+#define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \
+ | OR_FCM_PGS /* Large Page*/ \
+ | OR_FCM_CSCT \
+ | OR_FCM_CST \
+ | OR_FCM_CHT \
+ | OR_FCM_SCY_1 \
+ | OR_FCM_TRLX \
+ | OR_FCM_EHTR)
+
+#ifdef CONFIG_RAMBOOT_NAND
+#define CONFIG_SYS_BR0_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR0_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
+#define CONFIG_SYS_BR2_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
+#define CONFIG_SYS_OR2_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
+#else
+#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
+#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
+#define CONFIG_SYS_BR2_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */
+#define CONFIG_SYS_OR2_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
+#endif
+
+#define CONFIG_SYS_BR4_PRELIM \
+ (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000)) \
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_OR4_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
+#define CONFIG_SYS_BR5_PRELIM \
+ (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)) \
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_OR5_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
+
+#define CONFIG_SYS_BR6_PRELIM \
+ (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000)) \
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_OR6_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
/* Serial Port - controlled on board with jumper J8
* open - index 2
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_OF_BOARD_SETUP 1
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
-#define CONFIG_SYS_64BIT_STRTOUL 1
-#define CONFIG_SYS_64BIT_VSPRINTF 1
+#define CONFIG_SYS_64BIT_STRTOUL 1
+#define CONFIG_SYS_64BIT_VSPRINTF 1
/*
#define CONFIG_CMD_EXT2
#endif
-/*
- * USB
- */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
/*
* Environment
*/
-#define CONFIG_ENV_IS_IN_FLASH 1
-#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
-#define CONFIG_ENV_ADDR 0xfff80000
+
+#if defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_RAMBOOT_NAND)
+ #define CONFIG_ENV_IS_IN_NAND 1
+ #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+ #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
+ #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
+ #define CONFIG_ENV_SIZE 0x2000
+#endif
#else
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+ #define CONFIG_ENV_IS_IN_FLASH 1
+ #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
+ #define CONFIG_ENV_ADDR 0xfff80000
+ #else
+ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+ #endif
+ #define CONFIG_ENV_SIZE 0x2000
+ #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
#endif
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING /* Command-line editing */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#else
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
/*
* have to be in the first 16 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */
/*
* Internal Definitions
#define CONFIG_HOSTNAME unknown
#define CONFIG_ROOTPATH /opt/nfsroot
#define CONFIG_BOOTFILE uImage
-#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
+#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
#define CONFIG_SERVERIP 192.168.1.1
#define CONFIG_GATEWAYIP 192.168.1.1
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
/* LB sdram refresh timer, about 6us */
/*
* Local Bus LCRR and LBCR regs
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
#define CONFIG_SYS_LBC_LBCR (0x00040000 /* TODO */ \
| (0xFF << LBCR_BMT_SHIFT) \
| 0xF ) /* 0x0004ff0f */
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_8)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
/* board pre init: do not call, nothing to do */
#undef CONFIG_BOARD_EARLY_INIT_F
/*
* Local Bus Configuration & Clock Setup
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_2 | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_EADC LCRR_EADC_2
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
/*
* Init Local Bus Memory Controller:
#ifndef __CONFIG_H
#define __CONFIG_H
+/*
+ * Top level Makefile configuration choices
+ */
+#ifdef CONFIG_MK_PCI
+#define CONFIG_PCI
+#endif
+
+#ifdef CONFIG_MK_66
+#define PCI_66M
+#endif
+
+#ifdef CONFIG_MK_33
+#define PCI_33M
+#endif
+
/*
* High Level Configuration Options
*/
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
#undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+/*
+ * For soldered on flash, (128kB/sector) we use 2 sectors for u-boot and
+ * one for env+bootpg (TEXT_BASE=0xfffa_0000, 384kB total). For SODIMM
+ * flash (512kB/sector) we use 1 sector for u-boot, and one for env+bootpg
+ * (TEXT_BASE=0xfff0_0000, 1MB total). This dynamically sets the right
+ * thing for MONITOR_LEN in both cases.
+ */
+#define CONFIG_SYS_MONITOR_LEN (~TEXT_BASE + 1)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
* Environment
*/
#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
-#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
#define CONFIG_ENV_SIZE 0x2000
+#if TEXT_BASE == 0xfff00000 /* Boot from 64MB SODIMM */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x80000)
+#define CONFIG_ENV_SECT_SIZE 0x80000 /* 512K(one sector) for env */
+#elif TEXT_BASE == 0xfffa0000 /* Boot from 8MB soldered flash */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
+#else
+#warning undefined environment size/location.
+#endif
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
#define CONFIG_SYS_LBC_LBCR 0x00000000
#undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */
u32 val;
do {
- mfsdram(mem_mcsts, val);
+ mfsdram(SDRAM0_MCSTS, val);
} while (!(val & 0x80000000));
}
/*
* Disable memory controller.
*/
- mtsdram(mem_cfg0, 0x00000000);
+ mtsdram(SDRAM0_CFG0, 0x00000000);
/*
* Setup some default
*/
- mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
- mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
- mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
- mtsdram(mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
- mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+ mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */
+ mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */
+ mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
/*
* Following for CAS Latency = 2.5 @ 133 MHz PLB
*/
- mtsdram(mem_b0cr, 0x00082001);
- mtsdram(mem_tr0, 0x41094012);
- mtsdram(mem_tr1, 0x8080083d); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
- mtsdram(mem_rtr, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */
- mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM*/
+ mtsdram(SDRAM0_B0CR, 0x00082001);
+ mtsdram(SDRAM0_TR0, 0x41094012);
+ mtsdram(SDRAM0_TR1, 0x8080083d); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
+ mtsdram(SDRAM0_RTR, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */
+ mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM*/
/*
* Enable the controller, then wait for DCEN to complete
*/
- mtsdram(mem_cfg0, 0x80000000); /* DCEN=1, PMUD=0*/
+ mtsdram(SDRAM0_CFG0, 0x80000000); /* DCEN=1, PMUD=0*/
wait_init_complete();
return CONFIG_SYS_MBYTES_SDRAM << 20;
--- /dev/null
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# Copyright 2009 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+NAND_SPL := y
+TEXT_BASE := 0xfff00000
+PAD_TO := 0xfff01000
+
+include $(TOPDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/cpu/$(CPU)/u-boot-nand_spl.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS = start.o resetvec.o
+COBJS = cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
+ nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj := $(OBJTREE)/nand_spl/
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+# create symbolic links for common files
+
+$(obj)cache.c:
+ @rm -f $(obj)cache.c
+ ln -sf $(SRCTREE)/lib_ppc/cache.c $(obj)cache.c
+
+$(obj)cpu_init_early.c:
+ @rm -f $(obj)cpu_init_early.c
+ ln -sf $(SRCTREE)/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
+
+$(obj)cpu_init_nand.c:
+ @rm -f $(obj)cpu_init_nand.c
+ ln -sf $(SRCTREE)/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
+
+$(obj)fsl_law.c:
+ @rm -f $(obj)fsl_law.c
+ ln -sf $(SRCTREE)/drivers/misc/fsl_law.c $(obj)fsl_law.c
+
+$(obj)law.c:
+ @rm -f $(obj)law.c
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c
+
+$(obj)nand_boot_fsl_elbc.c:
+ @rm -f $(obj)nand_boot_fsl_elbc.c
+ ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
+ $(obj)nand_boot_fsl_elbc.c
+
+$(obj)ns16550.c:
+ @rm -f $(obj)ns16550.c
+ ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
+
+$(obj)resetvec.S:
+ @rm -f $(obj)resetvec.S
+ ln -s $(SRCTREE)/cpu/$(CPU)/resetvec.S $(obj)resetvec.S
+
+$(obj)fixed_ivor.S:
+ @rm -f $(obj)fixed_ivor.S
+ ln -sf $(SRCTREE)/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
+
+$(obj)start.S: $(obj)fixed_ivor.S
+ @rm -f $(obj)start.S
+ ln -sf $(SRCTREE)/cpu/mpc85xx/start.S $(obj)start.S
+
+$(obj)tlb.c:
+ @rm -f $(obj)tlb.c
+ ln -sf $(SRCTREE)/cpu/mpc85xx/tlb.c $(obj)tlb.c
+
+$(obj)tlb_table.c:
+ @rm -f $(obj)tlb_table.c
+ ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <asm/io.h>
+#include <nand.h>
+
+u32 sysclk_tbl[] = {
+ 33333000, 39999600, 49999500, 66666000,
+ 83332500, 99999000, 133332000, 166665000
+};
+
+void board_init_f(ulong bootflag)
+{
+ int px_spd;
+ u32 plat_ratio, bus_clk, sys_clk;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_lbc_t *lbc = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR;
+
+#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
+ /* for FPGA */
+ out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM);
+ out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM);
+#else
+#error CONFIG_SYS_BR3_PRELIM, CONFIG_SYS_OR3_PRELIM must be defined
+#endif
+
+ /* initialize selected port with appropriate baud rate */
+ px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD));
+ sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK];
+ plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+ bus_clk = sys_clk * plat_ratio / 2;
+
+ NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+ bus_clk / 16 / CONFIG_BAUDRATE);
+
+ puts("\nNAND boot... ");
+
+ /* copy code to RAM and jump to it - this should not return */
+ /* NOTE - code has to be copied out of NAND buffer before
+ * other blocks can be read.
+ */
+ relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0,
+ CONFIG_SYS_NAND_U_BOOT_RELOC);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+ nand_boot();
+}
+
+void putc(char c)
+{
+ if (c == '\n')
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
+
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
+}
+
+void puts(const char *str)
+{
+ while (*str)
+ putc(*str++);
+}
*/
#include <common.h>
-#include <version.h>
#include "onenand_ipl.h"
#define THIS_ONENAND(a) (CONFIG_SYS_ONENAND_BASE + (a))
-#define READ_INTERRUPT() \
- onenand_readw(THIS_ONENAND(ONENAND_REG_INTERRUPT))
+#define READ_INTERRUPT() onenand_readw(ONENAND_REG_INTERRUPT)
+extern int (*onenand_read_page)(ulong block, ulong page,
+ u_char *buf, int pagesize);
extern int onenand_read_block(unsigned char *buf);
#endif
/*
- * (C) Copyright 2005-2008 Samsung Electronis
+ * (C) Copyright 2005-2009 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
* See file CREDITS for list of people who contributed to this
extern void *memcpy32(void *dest, void *src, int size);
#endif
+int (*onenand_read_page)(ulong block, ulong page, u_char *buf, int pagesize);
+
/* read a page with ECC */
-static inline int onenand_read_page(ulong block, ulong page,
+static int generic_onenand_read_page(ulong block, ulong page,
u_char * buf, int pagesize)
{
unsigned long *base;
return 0;
}
-#define ONENAND_START_PAGE 1
+#ifndef CONFIG_ONENAND_START_PAGE
+#define CONFIG_ONENAND_START_PAGE 1
+#endif
#define ONENAND_PAGES_PER_BLOCK 64
+static void onenand_generic_init(int *page_is_4KiB, int *page)
+{
+ int dev_id, density;
+
+ if (onenand_readw(ONENAND_REG_TECHNOLOGY))
+ *page_is_4KiB = 1;
+ dev_id = onenand_readw(ONENAND_REG_DEVICE_ID);
+ density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+ density &= ONENAND_DEVICE_DENSITY_MASK;
+ if (density >= ONENAND_DEVICE_DENSITY_4Gb &&
+ !(dev_id & ONENAND_DEVICE_IS_DDP))
+ *page_is_4KiB = 1;
+}
+
/**
* onenand_read_block - Read CONFIG_SYS_MONITOR_LEN from begining
* of OneNAND, skipping bad blocks
*/
int onenand_read_block(unsigned char *buf)
{
- int block;
- int page = ONENAND_START_PAGE, offset = 0;
- int pagesize = 0, erase_shift = 0;
- int erasesize = 0, nblocks = 0;
+ int block, nblocks;
+ int page = CONFIG_ONENAND_START_PAGE, offset = 0;
+ int pagesize, erasesize, erase_shift;
+ int page_is_4KiB = 0;
+
+ onenand_read_page = generic_onenand_read_page;
+
+ onenand_generic_init(&page_is_4KiB, &page);
- if (onenand_readw(ONENAND_REG_TECHNOLOGY)) {
- pagesize = 4096; /* MLC OneNAND has 4KiB pagesize */
+ if (page_is_4KiB) {
+ pagesize = 4096; /* OneNAND has 4KiB pagesize */
erase_shift = 18;
} else {
- pagesize = 2048;
+ pagesize = 2048; /* OneNAND has 2KiB pagesize */
erase_shift = 17;
}
- erasesize = ONENAND_PAGES_PER_BLOCK * pagesize;
+ erasesize = (1 << erase_shift);
nblocks = (CONFIG_SYS_MONITOR_LEN + erasesize - 1) >> erase_shift;
/* NOTE: you must read page from page 1 of block 0 */
- /* read the block page by page*/
+ /* read the block page by page */
for (block = 0; block < nblocks; block++) {
for (; page < ONENAND_PAGES_PER_BLOCK; page++) {
if (onenand_read_page(block, page, buf + offset,
projects / karo-tx-uboot.git / commitdiff