ARM: dts: omap4-sdp-es23plus: Use OMAP4_IOPAD pinmux macro

Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
index aad5dda0f469ff7c3177ee26bbd29a4aabfaf7ad..b4d19a7ae39304e93c2d741a2bbd4830674eb663 100644 (file)
--- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts
+++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
@@ -10,8 +10,8 @@
 /* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
 &dss_hdmi_pins {
        pinctrl-single,pins = <
-               0x5a (PIN_INPUT_PULLUP | MUX_MODE0)     /* hdmi_cec.hdmi_cec */
-               0x5c (PIN_INPUT | MUX_MODE0)            /* hdmi_scl.hdmi_scl */
-               0x5e (PIN_INPUT | MUX_MODE0)            /* hdmi_sda.hdmi_sda */
+               OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)        /* hdmi_cec.hdmi_cec */
+               OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)               /* hdmi_scl.hdmi_scl */
+               OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)               /* hdmi_sda.hdmi_sda */
                >;
 };