- OMAP5 EVM : Evaluation Module
compatible = "ti,omap5-evm", "ti,omap5"
+
+- AM43x EPOS EVM
+ compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"
For various board the "board" node may contain specific properties
that pertain to this particular board, such as board-specific GPIOs.
+Required root node property: src
+- Nomadik System and reset controller used for basic chip control, clock
+ and reset line control.
+- compatible: must be "stericsson,nomadik,src"
+
Boards with the Nomadik SoC include:
S8815 "MiniKit" manufactured by Calao Systems:
--- /dev/null
+Device tree bindings for i.MX Wireless External Interface Module (WEIM)
+
+The term "wireless" does not imply that the WEIM is literally an interface
+without wires. It simply means that this module was originally designed for
+wireless and mobile applications that use low-power technology.
+
+The actual devices are instantiated from the child nodes of a WEIM node.
+
+Required properties:
+
+ - compatible: Should be set to "fsl,imx6q-weim"
+ - reg: A resource specifier for the register space
+ (see the example below)
+ - clocks: the clock, see the example below.
+ - #address-cells: Must be set to 2 to allow memory address translation
+ - #size-cells: Must be set to 1 to allow CS address passing
+ - ranges: Must be set up to reflect the memory layout with four
+ integer values for each chip-select line in use:
+
+ <cs-number> 0 <physical address of mapping> <size>
+
+Timing property for child nodes. It is mandatory, not optional.
+
+ - fsl,weim-cs-timing: The timing array, contains 6 timing values for the
+ child node. We can get the CS index from the child
+ node's "reg" property. This property contains the values
+ for the registers EIM_CSnGCR1, EIM_CSnGCR2, EIM_CSnRCR1,
+ EIM_CSnRCR2, EIM_CSnWCR1, EIM_CSnWCR2 in this order.
+
+Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
+
+ weim: weim@021b8000 {
+ compatible = "fsl,imx6q-weim";
+ reg = <0x021b8000 0x4000>;
+ clocks = <&clks 196>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x08000000 0x08000000>;
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+ 0x0000c000 0x1404a38e 0x00000000>;
+ };
+ };
"altr,socfpga-pll-clock" - for a PLL clock
"altr,socfpga-perip-clock" - The peripheral clock divided from the
PLL clock.
+ "altr,socfpga-gate-clk" - Clocks that directly feed peripherals and
+ can get gated.
+
- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
- clocks : shall be the input parent clock phandle for the clock. This is
either an oscillator or a pll output.
Optional properties:
- fixed-divider : If clocks have a fixed divider value, use this property.
+- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
+ and the bit index.
+- div-reg : For "socfpga-gate-clk", div-reg contains the divider register, bit shift,
+ and width.
sclk_spi0_isp 174 Exynos4x12
sclk_spi1_isp 175 Exynos4x12
sclk_uart_isp 176 Exynos4x12
+ sclk_fimg2d 177
[Peripheral Clock Gates]
smmu_mfcl 274
smmu_mfcr 275
g3d 276
- g2d 277 Exynos4210
+ g2d 277
rotator 278 Exynos4210
mdma 279 Exynos4210
smmu_g2d 280 Exynos4210
- clocks : Should contain phandle and clock specifiers for two clocks:
the 32 KHz "32k_in", and the board-specific oscillator "osc".
- #clock-cells : Should be 1.
- In clock consumers, this cell represents the clock ID exposed by the CAR.
-
- The first 160 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
- registers. These IDs often match those in the CAR's RST_DEVICES registers,
- but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
- this case, those clocks are assigned IDs above 160 in order to highlight
- this issue. Implementations that interpret these clock IDs as bit values
- within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
- explicitly handle these special cases.
-
- The balance of the clocks controlled by the CAR are assigned IDs of 160 and
- above.
-
- 0 unassigned
- 1 unassigned
- 2 unassigned
- 3 unassigned
- 4 rtc
- 5 timer
- 6 uarta
- 7 unassigned (register bit affects uartb and vfir)
- 8 unassigned
- 9 sdmmc2
- 10 unassigned (register bit affects spdif_in and spdif_out)
- 11 i2s1
- 12 i2c1
- 13 ndflash
- 14 sdmmc1
- 15 sdmmc4
- 16 unassigned
- 17 pwm
- 18 i2s2
- 19 epp
- 20 unassigned (register bit affects vi and vi_sensor)
- 21 2d
- 22 usbd
- 23 isp
- 24 3d
- 25 unassigned
- 26 disp2
- 27 disp1
- 28 host1x
- 29 vcp
- 30 i2s0
- 31 unassigned
-
- 32 unassigned
- 33 unassigned
- 34 apbdma
- 35 unassigned
- 36 kbc
- 37 unassigned
- 38 unassigned
- 39 unassigned (register bit affects fuse and fuse_burn)
- 40 kfuse
- 41 sbc1
- 42 nor
- 43 unassigned
- 44 sbc2
- 45 unassigned
- 46 sbc3
- 47 i2c5
- 48 dsia
- 49 unassigned
- 50 mipi
- 51 hdmi
- 52 csi
- 53 unassigned
- 54 i2c2
- 55 uartc
- 56 mipi-cal
- 57 emc
- 58 usb2
- 59 usb3
- 60 msenc
- 61 vde
- 62 bsea
- 63 bsev
-
- 64 unassigned
- 65 uartd
- 66 unassigned
- 67 i2c3
- 68 sbc4
- 69 sdmmc3
- 70 unassigned
- 71 owr
- 72 afi
- 73 csite
- 74 unassigned
- 75 unassigned
- 76 la
- 77 trace
- 78 soc_therm
- 79 dtv
- 80 ndspeed
- 81 i2cslow
- 82 dsib
- 83 tsec
- 84 unassigned
- 85 unassigned
- 86 unassigned
- 87 unassigned
- 88 unassigned
- 89 xusb_host
- 90 unassigned
- 91 msenc
- 92 csus
- 93 unassigned
- 94 unassigned
- 95 unassigned (bit affects xusb_dev and xusb_dev_src)
-
- 96 unassigned
- 97 unassigned
- 98 unassigned
- 99 mselect
- 100 tsensor
- 101 i2s3
- 102 i2s4
- 103 i2c4
- 104 sbc5
- 105 sbc6
- 106 d_audio
- 107 apbif
- 108 dam0
- 109 dam1
- 110 dam2
- 111 hda2codec_2x
- 112 unassigned
- 113 audio0_2x
- 114 audio1_2x
- 115 audio2_2x
- 116 audio3_2x
- 117 audio4_2x
- 118 spdif_2x
- 119 actmon
- 120 extern1
- 121 extern2
- 122 extern3
- 123 unassigned
- 124 unassigned
- 125 hda
- 126 unassigned
- 127 se
-
- 128 hda2hdmi
- 129 unassigned
- 130 unassigned
- 131 unassigned
- 132 unassigned
- 133 unassigned
- 134 unassigned
- 135 unassigned
- 136 unassigned
- 137 unassigned
- 138 unassigned
- 139 unassigned
- 140 unassigned
- 141 unassigned
- 142 unassigned
- 143 unassigned (bit affects xusb_falcon_src, xusb_fs_src,
- xusb_host_src and xusb_ss_src)
- 144 cilab
- 145 cilcd
- 146 cile
- 147 dsialp
- 148 dsiblp
- 149 unassigned
- 150 dds
- 151 unassigned
- 152 dp2
- 153 amx
- 154 adx
- 155 unassigned (bit affects dfll_ref and dfll_soc)
- 156 xusb_ss
-
- 192 uartb
- 193 vfir
- 194 spdif_in
- 195 spdif_out
- 196 vi
- 197 vi_sensor
- 198 fuse
- 199 fuse_burn
- 200 clk_32k
- 201 clk_m
- 202 clk_m_div2
- 203 clk_m_div4
- 204 pll_ref
- 205 pll_c
- 206 pll_c_out1
- 207 pll_c2
- 208 pll_c3
- 209 pll_m
- 210 pll_m_out1
- 211 pll_p
- 212 pll_p_out1
- 213 pll_p_out2
- 214 pll_p_out3
- 215 pll_p_out4
- 216 pll_a
- 217 pll_a_out0
- 218 pll_d
- 219 pll_d_out0
- 220 pll_d2
- 221 pll_d2_out0
- 222 pll_u
- 223 pll_u_480M
- 224 pll_u_60M
- 225 pll_u_48M
- 226 pll_u_12M
- 227 pll_x
- 228 pll_x_out0
- 229 pll_re_vco
- 230 pll_re_out
- 231 pll_e_out0
- 232 spdif_in_sync
- 233 i2s0_sync
- 234 i2s1_sync
- 235 i2s2_sync
- 236 i2s3_sync
- 237 i2s4_sync
- 238 vimclk_sync
- 239 audio0
- 240 audio1
- 241 audio2
- 242 audio3
- 243 audio4
- 244 spdif
- 245 clk_out_1
- 246 clk_out_2
- 247 clk_out_3
- 248 blink
- 252 xusb_host_src
- 253 xusb_falcon_src
- 254 xusb_fs_src
- 255 xusb_ss_src
- 256 xusb_dev_src
- 257 xusb_dev
- 258 xusb_hs_src
- 259 sclk
- 260 hclk
- 261 pclk
- 262 cclk_g
- 263 cclk_lp
- 264 dfll_ref
- 265 dfll_soc
+ In clock consumers, this cell represents the clock ID exposed by the
+ CAR. The assignments may be found in header file
+ <dt-bindings/clock/tegra114-car.h>.
Example SoC include file:
};
usb@c5004000 {
- clocks = <&tegra_car 58>; /* usb2 */
+ clocks = <&tegra_car TEGRA114_CLK_USB2>;
};
};
- clocks : Should contain phandle and clock specifiers for two clocks:
the 32 KHz "32k_in", and the board-specific oscillator "osc".
- #clock-cells : Should be 1.
- In clock consumers, this cell represents the clock ID exposed by the CAR.
-
- The first 96 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
- registers. These IDs often match those in the CAR's RST_DEVICES registers,
- but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
- this case, those clocks are assigned IDs above 95 in order to highlight
- this issue. Implementations that interpret these clock IDs as bit values
- within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
- explicitly handle these special cases.
-
- The balance of the clocks controlled by the CAR are assigned IDs of 96 and
- above.
-
- 0 cpu
- 1 unassigned
- 2 unassigned
- 3 ac97
- 4 rtc
- 5 tmr
- 6 uart1
- 7 unassigned (register bit affects uart2 and vfir)
- 8 gpio
- 9 sdmmc2
- 10 unassigned (register bit affects spdif_in and spdif_out)
- 11 i2s1
- 12 i2c1
- 13 ndflash
- 14 sdmmc1
- 15 sdmmc4
- 16 twc
- 17 pwm
- 18 i2s2
- 19 epp
- 20 unassigned (register bit affects vi and vi_sensor)
- 21 2d
- 22 usbd
- 23 isp
- 24 3d
- 25 ide
- 26 disp2
- 27 disp1
- 28 host1x
- 29 vcp
- 30 unassigned
- 31 cache2
-
- 32 mem
- 33 ahbdma
- 34 apbdma
- 35 unassigned
- 36 kbc
- 37 stat_mon
- 38 pmc
- 39 fuse
- 40 kfuse
- 41 sbc1
- 42 snor
- 43 spi1
- 44 sbc2
- 45 xio
- 46 sbc3
- 47 dvc
- 48 dsi
- 49 unassigned (register bit affects tvo and cve)
- 50 mipi
- 51 hdmi
- 52 csi
- 53 tvdac
- 54 i2c2
- 55 uart3
- 56 unassigned
- 57 emc
- 58 usb2
- 59 usb3
- 60 mpe
- 61 vde
- 62 bsea
- 63 bsev
-
- 64 speedo
- 65 uart4
- 66 uart5
- 67 i2c3
- 68 sbc4
- 69 sdmmc3
- 70 pcie
- 71 owr
- 72 afi
- 73 csite
- 74 unassigned
- 75 avpucq
- 76 la
- 77 unassigned
- 78 unassigned
- 79 unassigned
- 80 unassigned
- 81 unassigned
- 82 unassigned
- 83 unassigned
- 84 irama
- 85 iramb
- 86 iramc
- 87 iramd
- 88 cram2
- 89 audio_2x a/k/a audio_2x_sync_clk
- 90 clk_d
- 91 unassigned
- 92 sus
- 93 cdev2
- 94 cdev1
- 95 unassigned
-
- 96 uart2
- 97 vfir
- 98 spdif_in
- 99 spdif_out
- 100 vi
- 101 vi_sensor
- 102 tvo
- 103 cve
- 104 osc
- 105 clk_32k a/k/a clk_s
- 106 clk_m
- 107 sclk
- 108 cclk
- 109 hclk
- 110 pclk
- 111 blink
- 112 pll_a
- 113 pll_a_out0
- 114 pll_c
- 115 pll_c_out1
- 116 pll_d
- 117 pll_d_out0
- 118 pll_e
- 119 pll_m
- 120 pll_m_out1
- 121 pll_p
- 122 pll_p_out1
- 123 pll_p_out2
- 124 pll_p_out3
- 125 pll_p_out4
- 126 pll_s
- 127 pll_u
- 128 pll_x
- 129 cop a/k/a avp
- 130 audio a/k/a audio_sync_clk
- 131 pll_ref
- 132 twd
+ In clock consumers, this cell represents the clock ID exposed by the
+ CAR. The assignments may be found in header file
+ <dt-bindings/clock/tegra20-car.h>.
Example SoC include file:
};
usb@c5004000 {
- clocks = <&tegra_car 58>; /* usb2 */
+ clocks = <&tegra_car TEGRA20_CLK_USB2>;
};
};
- clocks : Should contain phandle and clock specifiers for two clocks:
the 32 KHz "32k_in", and the board-specific oscillator "osc".
- #clock-cells : Should be 1.
- In clock consumers, this cell represents the clock ID exposed by the CAR.
-
- The first 130 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
- registers. These IDs often match those in the CAR's RST_DEVICES registers,
- but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
- this case, those clocks are assigned IDs above 160 in order to highlight
- this issue. Implementations that interpret these clock IDs as bit values
- within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
- explicitly handle these special cases.
-
- The balance of the clocks controlled by the CAR are assigned IDs of 160 and
- above.
-
- 0 cpu
- 1 unassigned
- 2 unassigned
- 3 unassigned
- 4 rtc
- 5 timer
- 6 uarta
- 7 unassigned (register bit affects uartb and vfir)
- 8 gpio
- 9 sdmmc2
- 10 unassigned (register bit affects spdif_in and spdif_out)
- 11 i2s1
- 12 i2c1
- 13 ndflash
- 14 sdmmc1
- 15 sdmmc4
- 16 unassigned
- 17 pwm
- 18 i2s2
- 19 epp
- 20 unassigned (register bit affects vi and vi_sensor)
- 21 2d
- 22 usbd
- 23 isp
- 24 3d
- 25 unassigned
- 26 disp2
- 27 disp1
- 28 host1x
- 29 vcp
- 30 i2s0
- 31 cop_cache
-
- 32 mc
- 33 ahbdma
- 34 apbdma
- 35 unassigned
- 36 kbc
- 37 statmon
- 38 pmc
- 39 unassigned (register bit affects fuse and fuse_burn)
- 40 kfuse
- 41 sbc1
- 42 nor
- 43 unassigned
- 44 sbc2
- 45 unassigned
- 46 sbc3
- 47 i2c5
- 48 dsia
- 49 unassigned (register bit affects cve and tvo)
- 50 mipi
- 51 hdmi
- 52 csi
- 53 tvdac
- 54 i2c2
- 55 uartc
- 56 unassigned
- 57 emc
- 58 usb2
- 59 usb3
- 60 mpe
- 61 vde
- 62 bsea
- 63 bsev
-
- 64 speedo
- 65 uartd
- 66 uarte
- 67 i2c3
- 68 sbc4
- 69 sdmmc3
- 70 pcie
- 71 owr
- 72 afi
- 73 csite
- 74 pciex
- 75 avpucq
- 76 la
- 77 unassigned
- 78 unassigned
- 79 dtv
- 80 ndspeed
- 81 i2cslow
- 82 dsib
- 83 unassigned
- 84 irama
- 85 iramb
- 86 iramc
- 87 iramd
- 88 cram2
- 89 unassigned
- 90 audio_2x a/k/a audio_2x_sync_clk
- 91 unassigned
- 92 csus
- 93 cdev2
- 94 cdev1
- 95 unassigned
-
- 96 cpu_g
- 97 cpu_lp
- 98 3d2
- 99 mselect
- 100 tsensor
- 101 i2s3
- 102 i2s4
- 103 i2c4
- 104 sbc5
- 105 sbc6
- 106 d_audio
- 107 apbif
- 108 dam0
- 109 dam1
- 110 dam2
- 111 hda2codec_2x
- 112 atomics
- 113 audio0_2x
- 114 audio1_2x
- 115 audio2_2x
- 116 audio3_2x
- 117 audio4_2x
- 118 audio5_2x
- 119 actmon
- 120 extern1
- 121 extern2
- 122 extern3
- 123 sata_oob
- 124 sata
- 125 hda
- 127 se
- 128 hda2hdmi
- 129 sata_cold
-
- 160 uartb
- 161 vfir
- 162 spdif_in
- 163 spdif_out
- 164 vi
- 165 vi_sensor
- 166 fuse
- 167 fuse_burn
- 168 cve
- 169 tvo
-
- 170 clk_32k
- 171 clk_m
- 172 clk_m_div2
- 173 clk_m_div4
- 174 pll_ref
- 175 pll_c
- 176 pll_c_out1
- 177 pll_m
- 178 pll_m_out1
- 179 pll_p
- 180 pll_p_out1
- 181 pll_p_out2
- 182 pll_p_out3
- 183 pll_p_out4
- 184 pll_a
- 185 pll_a_out0
- 186 pll_d
- 187 pll_d_out0
- 188 pll_d2
- 189 pll_d2_out0
- 190 pll_u
- 191 pll_x
- 192 pll_x_out0
- 193 pll_e
- 194 spdif_in_sync
- 195 i2s0_sync
- 196 i2s1_sync
- 197 i2s2_sync
- 198 i2s3_sync
- 199 i2s4_sync
- 200 vimclk
- 201 audio0
- 202 audio1
- 203 audio2
- 204 audio3
- 205 audio4
- 206 audio5
- 207 clk_out_1 (extern1)
- 208 clk_out_2 (extern2)
- 209 clk_out_3 (extern3)
- 210 sclk
- 211 blink
- 212 cclk_g
- 213 cclk_lp
- 214 twd
- 215 cml0
- 216 cml1
- 217 hclk
- 218 pclk
+ In clock consumers, this cell represents the clock ID exposed by the
+ CAR. The assignments may be found in header file
+ <dt-bindings/clock/tegra30-car.h>.
Example SoC include file:
};
usb@c5004000 {
- clocks = <&tegra_car 58>; /* usb2 */
+ clocks = <&tegra_car TEGRA30_CLK_USB2>;
};
};
--- /dev/null
+ST Microelectronics Nomadik SRC System Reset and Control
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The Nomadik SRC controller is responsible of controlling chrystals,
+PLLs and clock gates.
+
+Required properties for the SRC node:
+- compatible: must be "stericsson,nomadik-src"
+- reg: must contain the SRC register base and size
+
+Optional properties for the SRC node:
+- disable-sxtalo: if present this will disable the SXTALO
+ i.e. the driver output for the slow 32kHz chrystal, if the
+ board has its own circuitry for providing this oscillator
+- disable-mxtal: if present this will disable the MXTALO,
+ i.e. the driver output for the main (~19.2 MHz) chrystal,
+ if the board has its own circuitry for providing this
+ osciallator
+
+
+PLL nodes: these nodes represent the two PLLs on the system,
+which should both have the main chrystal, represented as a
+fixed frequency clock, as parent.
+
+Required properties for the two PLL nodes:
+- compatible: must be "st,nomadik-pll-clock"
+- clock-cells: must be 0
+- clock-id: must be 1 or 2 for PLL1 and PLL2 respectively
+- clocks: this clock will have main chrystal as parent
+
+
+HCLK nodes: these represent the clock gates on individual
+lines from the HCLK clock tree and the gate for individual
+lines from the PCLK clock tree.
+
+Requires properties for the HCLK nodes:
+- compatible: must be "st,nomadik-hclk-clock"
+- clock-cells: must be 0
+- clock-id: must be the clock ID from 0 to 63 according to
+ this table:
+
+ 0: HCLKDMA0
+ 1: HCLKSMC
+ 2: HCLKSDRAM
+ 3: HCLKDMA1
+ 4: HCLKCLCD
+ 5: PCLKIRDA
+ 6: PCLKSSP
+ 7: PCLKUART0
+ 8: PCLKSDI
+ 9: PCLKI2C0
+ 10: PCLKI2C1
+ 11: PCLKUART1
+ 12: PCLMSP0
+ 13: HCLKUSB
+ 14: HCLKDIF
+ 15: HCLKSAA
+ 16: HCLKSVA
+ 17: PCLKHSI
+ 18: PCLKXTI
+ 19: PCLKUART2
+ 20: PCLKMSP1
+ 21: PCLKMSP2
+ 22: PCLKOWM
+ 23: HCLKHPI
+ 24: PCLKSKE
+ 25: PCLKHSEM
+ 26: HCLK3D
+ 27: HCLKHASH
+ 28: HCLKCRYP
+ 29: PCLKMSHC
+ 30: HCLKUSBM
+ 31: HCLKRNG
+ (32, 33, 34, 35 RESERVED)
+ 36: CLDCLK
+ 37: IRDACLK
+ 38: SSPICLK
+ 39: UART0CLK
+ 40: SDICLK
+ 41: I2C0CLK
+ 42: I2C1CLK
+ 43: UART1CLK
+ 44: MSPCLK0
+ 45: USBCLK
+ 46: DIFCLK
+ 47: IPI2CCLK
+ 48: IPBMCCLK
+ 49: HSICLKRX
+ 50: HSICLKTX
+ 51: UART2CLK
+ 52: MSPCLK1
+ 53: MSPCLK2
+ 54: OWMCLK
+ (55 RESERVED)
+ 56: SKECLK
+ (57 RESERVED)
+ 58: 3DCLK
+ 59: PCLKMSP3
+ 60: MSPCLK3
+ 61: MSHCCLK
+ 62: USBMCLK
+ 63: RNGCCLK
mapped region.
- interrupts : G2D interrupt number to the CPU.
+ - clocks : from common clock binding: handle to G2D clocks.
+ - clock-names : from common clock binding: must contain "sclk_fimg2d" and
+ "fimg2d", corresponding to entries in the clocks property.
Example:
g2d@12800000 {
compatible = "samsung,s5pv210-g2d";
reg = <0x12800000 0x1000>;
interrupts = <0 89 0>;
+ clocks = <&clock 177>, <&clock 277>;
+ clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled";
};
--- /dev/null
+DT bindings for the R-/SH-Mobile irqpin controller
+
+Required properties:
+
+- compatible: has to be "renesas,intc-irqpin"
+- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
+ interrupts.txt in this directory
+
+Optional properties:
+
+- any properties, listed in interrupts.txt, and any standard resource allocation
+ properties
+- sense-bitfield-width: width of a single sense bitfield in the SENSE register,
+ if different from the default 4 bits
+- control-parent: disable and enable interrupts on the parent interrupt
+ controller, needed for some broken implementations
mapped region.
- interrupts : MFC interrupt number to the CPU.
+ - clocks : from common clock binding: handle to mfc clocks.
+ - clock-names : from common clock binding: must contain "sclk_mfc" and "mfc",
+ corresponding to entries in the clocks property.
- samsung,mfc-r : Base address of the first memory bank used by MFC
for DMA contiguous memory allocation and its size.
reg = <0x13400000 0x10000>;
interrupts = <0 94 0>;
samsung,power-domain = <&pd_mfc>;
+ clocks = <&clock 170>, <&clock 273>;
+ clock-names = "sclk_mfc", "mfc";
};
Board specific DT entry:
"USB_LINK_STATUS",
"USB_ADP_PROBE_PLUG",
"USB_ADP_PROBE_UNPLUG";
- vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
+ vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
v-ape-supply = <&db8500_vape_reg>;
musb_1v8-supply = <&db8500_vsmps2_reg>;
};
--- /dev/null
+Broadcom BCM281xx SDHCI
+
+This file documents differences between the core properties in mmc.txt
+and the properties present in the bcm281xx SDHCI
+
+Required properties:
+- compatible : Should be "bcm,kona-sdhci"
+
+Example:
+
+sdio2: sdio@0x3f1a0000 {
+ compatible = "bcm,kona-sdhci";
+ reg = <0x3f1a0000 0x10000>;
+ interrupts = <0x0 74 0x4>;
+};
+
Examples:
usdhc@0219c000 { /* uSDHC4 */
- fsl,card-wired;
+ non-removable;
vmmc-supply = <®_3p3v>;
status = "okay";
pinctrl-names = "default";
- gpio-controller: identifies the node as a gpio controller and pin bank.
- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
- binding is used, the amount of cells must be specified as 2. See generic
- GPIO binding documentation for description of particular cells.
+ binding is used, the amount of cells must be specified as 2. See the below
+ mentioned gpio binding representation for description of particular cells.
+
+ Eg: <&gpx2 6 0>
+ <[phandle of the gpio controller node]
+ [pin number within the gpio controller]
+ [flags]>
+
+ Values for gpio specifier:
+ - Pin number: is a value between 0 to 7.
+ - Flags: 0 - Active High
+ 1 - Active Low
- Pin mux/config groups as child nodes: The pin mux (selecting pin function
mode) and pin config (pull up/down, driver strength) settings are represented
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
}
+
+Example 5: A display port client node that supports 'default' pinctrl state
+ and gpio binding.
+
+ display-port-controller {
+ /* ... */
+
+ samsung,hpd-gpio = <&gpx2 6 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ };
+
+Example 6: Request the gpio for display port controller
+
+ static int exynos_dp_probe(struct platform_device *pdev)
+ {
+ int hpd_gpio, ret;
+ struct device *dev = &pdev->dev;
+ struct device_node *dp_node = dev->of_node;
+
+ /* ... */
+
+ hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio", 0);
+
+ /* ... */
+
+ ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN,
+ "hpd_gpio");
+ /* ... */
+ }
clocks = <&clock 285>;
clock-names = "usbhost";
};
+
+DWC3
+Required properties:
+ - compatible: should be "samsung,exynos5250-dwusb3" for USB 3.0 DWC3
+ controller.
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+ with 'reg' property.
+ - ranges: allows valid 1:1 translation between child's address space and
+ parent's address space
+ - clocks: Clock IDs array as required by the controller.
+ - clock-names: names of clocks correseponding to IDs in the clock property
+
+Sub-nodes:
+The dwc3 core should be added as subnode to Exynos dwc3 glue.
+- dwc3 :
+ The binding details of dwc3 can be found in:
+ Documentation/devicetree/bindings/usb/dwc3.txt
+
+Example:
+ usb@12000000 {
+ compatible = "samsung,exynos5250-dwusb3";
+ clocks = <&clock 286>;
+ clock-names = "usbdrd30";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dwc3 {
+ compatible = "synopsys,dwc3";
+ reg = <0x12000000 0x10000>;
+ interrupts = <0 72 0>;
+ usb-phy = <&usb2_phy &usb3_phy>;
+ };
+ };
of memory mapped region.
-interrupts:
interrupt combiner values.
+ -clocks:
+ from common clock binding: handle to dp clock.
+ -clock-names:
+ from common clock binding: Shall be "dp".
-interrupt-parent:
phandle to Interrupt combiner node.
-samsung,color-space:
reg = <0x145b0000 0x10000>;
interrupts = <10 3>;
interrupt-parent = <&combiner>;
+ clocks = <&clock 342>;
+ clock-names = "dp";
dptx-phy {
reg = <0x10040720>;
dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb
# sam9g20
+dtb-$(CONFIG_ARCH_AT91) += at91-foxg20.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb
dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb
dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb
# sam9g45
dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
kirkwood-ns2max.dtb \
kirkwood-ns2mini.dtb \
kirkwood-nsa310.dtb \
+ kirkwood-sheevaplug.dtb \
+ kirkwood-sheevaplug-esata.dtb \
kirkwood-topkick.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb \
imx27-apf27.dtb \
imx27-apf27dev.dtb \
imx27-pdk.dtb \
- imx27-phytec-phycore.dtb \
+ imx27-phytec-phycore-som.dtb \
+ imx27-phytec-phycore-rdk.dtb \
imx31-bug.dtb \
imx51-apf51.dtb \
imx51-apf51dev.dtb \
imx51-babbage.dtb \
imx53-ard.dtb \
imx53-evk.dtb \
+ imx53-m53evk.dtb \
imx53-mba53.dtb \
imx53-qsb.dtb \
imx53-smd.dtb \
imx6dl-sabresd.dtb \
imx6dl-wandboard.dtb \
imx6q-arm2.dtb \
+ imx6q-phytec-pbab01.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
- imx6q-sbc6x.dtb
+ imx6q-sbc6x.dtb \
+ imx6sl-evk.dtb \
+ vf610-twr.dtb
dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx23-olinuxino.dtb \
imx23-stmp378x_devb.dtb \
imx28-cfa10036.dtb \
imx28-cfa10037.dtb \
imx28-cfa10049.dtb \
+ imx28-cfa10055.dtb \
+ imx28-cfa10057.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
imx28-sps1.dtb \
omap4-panda-es.dtb \
omap4-var-som.dtb \
omap4-sdp.dtb \
- omap5-evm.dtb \
+ omap4-sdp-es23plus.dtb \
+ omap5-uevm.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
- am335x-bone.dtb
+ am335x-bone.dtb \
+ am3517-evm.dtb \
+ am3517_mt_ventoux.dtb \
+ am43x-epos-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
hrefprev60.dtb \
hrefv60plus.dtb \
+ ccu8540.dtb \
ccu9540.dtb
+dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
+ r8a7740-armadillo800eva-reference.dtb \
r8a7779-marzen-reference.dtb \
r8a7790-lager.dtb \
sh73a0-kzm9g.dtb \
sun4i-a10-cubieboard.dtb \
sun4i-a10-mini-xplus.dtb \
sun4i-a10-hackberry.dtb \
+ sun5i-a10s-olinuxino-micro.dtb \
sun5i-a13-olinuxino.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-iris-512.dtb \
dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
wm8505-ref.dtb \
wm8650-mid.dtb \
+ wm8750-apc8750.dtb \
wm8850-w70v2.dtb
-dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
+dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
+ zynq-zc706.dtb \
+ zynq-zed.dtb
targets += dtbs
targets += $(dtb-y)
*/
/dts-v1/;
-/include/ "am33xx.dtsi"
+#include "am33xx.dtsi"
/ {
model = "TI AM335x BeagleBone";
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
- pinctrl-0 = <&user_leds_s0>;
+ pinctrl-0 = <&clkout2_pin>;
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
- 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
- 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
- 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
- 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+ 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ clkout2_pin: pinmux_clkout2_pin {
+ pinctrl-single,pins = <
+ 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
+ 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
+ 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
+ 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
+ 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
+ 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
+ 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
+ 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
+ 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
+ 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
};
ocp {
- uart1: serial@44e09000 {
+ uart0: serial@44e09000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
status = "okay";
};
i2c0: i2c@44e0b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
status = "okay";
clock-frequency = <400000>;
};
leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
compatible = "gpio-leds";
led@2 {
label = "beaglebone:green:heartbeat";
- gpios = <&gpio1 21 0>;
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@3 {
label = "beaglebone:green:mmc0";
- gpios = <&gpio1 22 0>;
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@4 {
label = "beaglebone:green:usr2";
- gpios = <&gpio1 23 0>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@5 {
label = "beaglebone:green:usr3";
- gpios = <&gpio1 24 0>;
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+};
*/
/dts-v1/;
-/include/ "am33xx.dtsi"
+#include "am33xx.dtsi"
/ {
model = "TI AM335x EVM";
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
- pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
+ pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
matrix_keypad_s0: matrix_keypad_s0 {
pinctrl-single,pins = <
- 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
- 0x58 0x7 /* gpmc_a6.gpio1_22, OUTPUT | MODE7 */
- 0x64 0x27 /* gpmc_a9.gpio1_25, INPUT | MODE7 */
- 0x68 0x27 /* gpmc_a10.gpio1_26, INPUT | MODE7 */
- 0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */
+ 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */
>;
};
volume_keys_s0: volume_keys_s0 {
pinctrl-single,pins = <
- 0x150 0x27 /* spi0_sclk.gpio0_2, INPUT | MODE7 */
- 0x154 0x27 /* spi0_d0.gpio0_3, INPUT | MODE7 */
+ 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */
+ 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ clkout2_pin: pinmux_clkout2_pin {
+ pinctrl-single,pins = <
+ 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ >;
+ };
+
+ nandflash_pins_s0: nandflash_pins_s0 {
+ pinctrl-single,pins = <
+ 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
+ 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ >;
+ };
+
+ ecap0_pins: backlight_pins {
+ pinctrl-single,pins = <
+ 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
};
ocp {
- uart1: serial@44e09000 {
+ uart0: serial@44e09000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
status = "okay";
};
i2c0: i2c@44e0b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
status = "okay";
clock-frequency = <400000>;
};
i2c1: i2c@4802a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
status = "okay";
clock-frequency = <100000>;
reg = <0x48>;
};
};
+
+ elm: elm@48080000 {
+ status = "okay";
+ };
+
+ epwmss0: epwmss@48300000 {
+ status = "okay";
+
+ ecap0: ecap@48300100 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+ };
+ };
+
+ gpmc: gpmc@50000000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins_s0>;
+ ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ nand@0,0 {
+ reg = <0 0 0>; /* CS0, offset 0 */
+ nand-bus-width = <8>;
+ ti,nand-ecc-opt = "bch8";
+ gpmc,device-nand = "true";
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wait-on-read = "true";
+ gpmc,wait-on-write = "true";
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ elm_id = <&elm>;
+
+ /* MTD partition table */
+ partition@0 {
+ label = "SPL1";
+ reg = <0x00000000 0x000020000>;
+ };
+
+ partition@1 {
+ label = "SPL2";
+ reg = <0x00020000 0x00020000>;
+ };
+
+ partition@2 {
+ label = "SPL3";
+ reg = <0x00040000 0x00020000>;
+ };
+
+ partition@3 {
+ label = "SPL4";
+ reg = <0x00060000 0x00020000>;
+ };
+
+ partition@4 {
+ label = "U-boot";
+ reg = <0x00080000 0x001e0000>;
+ };
+
+ partition@5 {
+ label = "environment";
+ reg = <0x00260000 0x00020000>;
+ };
+
+ partition@6 {
+ label = "Kernel";
+ reg = <0x00280000 0x00500000>;
+ };
+
+ partition@7 {
+ label = "File-System";
+ reg = <0x00780000 0x0F880000>;
+ };
+ };
+ };
};
vbat: fixedregulator@0 {
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
- row-gpios = <&gpio1 25 0 /* Bank1, pin25 */
- &gpio1 26 0 /* Bank1, pin26 */
- &gpio1 27 0>; /* Bank1, pin27 */
+ row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH /* Bank1, pin25 */
+ &gpio1 26 GPIO_ACTIVE_HIGH /* Bank1, pin26 */
+ &gpio1 27 GPIO_ACTIVE_HIGH>; /* Bank1, pin27 */
- col-gpios = <&gpio1 21 0 /* Bank1, pin21 */
- &gpio1 22 0>; /* Bank1, pin22 */
+ col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH /* Bank1, pin21 */
+ &gpio1 22 GPIO_ACTIVE_HIGH>; /* Bank1, pin22 */
linux,keymap = <0x0000008b /* MENU */
0x0100009e /* BACK */
switch@9 {
label = "volume-up";
linux,code = <115>;
- gpios = <&gpio0 2 1>;
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
gpio-key,wakeup;
};
switch@10 {
label = "volume-down";
linux,code = <114>;
- gpios = <&gpio0 3 1>;
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
gpio-key,wakeup;
};
};
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 0>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
};
-/include/ "tps65910.dtsi"
+#include "tps65910.dtsi"
&tps {
vcc1-supply = <&vbat>;
};
};
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+};
+
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
};
/dts-v1/;
-/include/ "am33xx.dtsi"
+#include "am33xx.dtsi"
/ {
model = "TI AM335x EVM-SK";
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
- pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>;
+ pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
- 0x10 0x7 /* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */
- 0x14 0x7 /* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */
- 0x18 0x7 /* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */
- 0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */
+ 0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+ 0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+ 0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+ 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
>;
};
gpio_keys_s0: gpio_keys_s0 {
pinctrl-single,pins = <
- 0x94 0x27 /* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */
- 0x90 0x27 /* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */
- 0x70 0x27 /* gpmc_wait0.gpio0_30, INPUT | MODE7 */
- 0x9c 0x27 /* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */
+ 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */
+ 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
+ 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */
+ 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ clkout2_pin: pinmux_clkout2_pin {
+ pinctrl-single,pins = <
+ 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ >;
+ };
+
+ ecap2_pins: backlight_pins {
+ pinctrl-single,pins = <
+ 0x19c 0x4 /* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+
+ /* Slave 2 */
+ 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
+ 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+ /* Slave 2 reset value*/
+ 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
};
ocp {
- uart1: serial@44e09000 {
+ uart0: serial@44e09000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
status = "okay";
};
i2c0: i2c@44e0b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
status = "okay";
clock-frequency = <400000>;
st,max-limit-z = <750>;
};
};
+
+ epwmss2: epwmss@48304000 {
+ status = "okay";
+
+ ecap2: ecap@48304100 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap2_pins>;
+ };
+ };
};
vbat: fixedregulator@0 {
};
leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
compatible = "gpio-leds";
led@1 {
label = "evmsk:green:usr0";
- gpios = <&gpio1 4 0>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@2 {
label = "evmsk:green:usr1";
- gpios = <&gpio1 5 0>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@3 {
label = "evmsk:green:mmc0";
- gpios = <&gpio1 6 0>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@4 {
label = "evmsk:green:heartbeat";
- gpios = <&gpio1 7 0>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
switch@1 {
label = "button0";
linux,code = <0x100>;
- gpios = <&gpio2 3 0>;
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
};
switch@2 {
label = "button1";
linux,code = <0x101>;
- gpios = <&gpio2 2 0>;
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
};
switch@3 {
label = "button2";
linux,code = <0x102>;
- gpios = <&gpio0 30 0>;
+ gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
gpio-key,wakeup;
};
switch@4 {
label = "button3";
linux,code = <0x103>;
- gpios = <&gpio2 5 0>;
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
};
};
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap2 0 50000 1>;
+ brightness-levels = <0 58 61 66 75 90 125 170 255>;
+ default-brightness-level = <8>;
+ };
};
-/include/ "tps65910.dtsi"
+#include "tps65910.dtsi"
&tps {
vcc1-supply = <&vbat>;
};
};
};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+};
* kind, whether express or implied.
*/
-/include/ "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+#include "skeleton.dtsi"
/ {
compatible = "ti,am33xx";
interrupt-parent = <&intc>;
aliases {
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- serial5 = &uart6;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
d_can0 = &dcan0;
d_can1 = &dcan1;
};
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a8";
+ device_type = "cpu";
+ reg = <0>;
/*
* To consider voltage drop between PMIC and SoC,
interrupts = <62>;
};
- uart1: serial@44e09000 {
+ uart0: serial@44e09000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
};
- uart2: serial@48022000 {
+ uart1: serial@48022000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
status = "disabled";
};
- uart3: serial@48024000 {
+ uart2: serial@48024000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
status = "disabled";
};
- uart4: serial@481a6000 {
+ uart3: serial@481a6000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
};
- uart5: serial@481a8000 {
+ uart4: serial@481a8000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
};
- uart6: serial@481aa000 {
+ uart5: serial@481aa000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
ti,hwmods = "usb_otg_hs";
};
+ epwmss0: epwmss@48300000 {
+ compatible = "ti,am33xx-pwmss";
+ reg = <0x48300000 0x10>;
+ ti,hwmods = "epwmss0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges = <0x48300100 0x48300100 0x80 /* ECAP */
+ 0x48300180 0x48300180 0x80 /* EQEP */
+ 0x48300200 0x48300200 0x80>; /* EHRPWM */
+
+ ecap0: ecap@48300100 {
+ compatible = "ti,am33xx-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48300100 0x80>;
+ ti,hwmods = "ecap0";
+ status = "disabled";
+ };
+
+ ehrpwm0: ehrpwm@48300200 {
+ compatible = "ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48300200 0x80>;
+ ti,hwmods = "ehrpwm0";
+ status = "disabled";
+ };
+ };
+
+ epwmss1: epwmss@48302000 {
+ compatible = "ti,am33xx-pwmss";
+ reg = <0x48302000 0x10>;
+ ti,hwmods = "epwmss1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges = <0x48302100 0x48302100 0x80 /* ECAP */
+ 0x48302180 0x48302180 0x80 /* EQEP */
+ 0x48302200 0x48302200 0x80>; /* EHRPWM */
+
+ ecap1: ecap@48302100 {
+ compatible = "ti,am33xx-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48302100 0x80>;
+ ti,hwmods = "ecap1";
+ status = "disabled";
+ };
+
+ ehrpwm1: ehrpwm@48302200 {
+ compatible = "ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48302200 0x80>;
+ ti,hwmods = "ehrpwm1";
+ status = "disabled";
+ };
+ };
+
+ epwmss2: epwmss@48304000 {
+ compatible = "ti,am33xx-pwmss";
+ reg = <0x48304000 0x10>;
+ ti,hwmods = "epwmss2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges = <0x48304100 0x48304100 0x80 /* ECAP */
+ 0x48304180 0x48304180 0x80 /* EQEP */
+ 0x48304200 0x48304200 0x80>; /* EHRPWM */
+
+ ecap2: ecap@48304100 {
+ compatible = "ti,am33xx-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48304100 0x80>;
+ ti,hwmods = "ecap2";
+ status = "disabled";
+ };
+
+ ehrpwm2: ehrpwm@48304200 {
+ compatible = "ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48304200 0x80>;
+ ti,hwmods = "ehrpwm2";
+ status = "disabled";
+ };
+ };
+
mac: ethernet@4a100000 {
compatible = "ti,cpsw";
ti,hwmods = "cpgmac0";
ti,hwmods = "wkup_m3";
};
+ elm: elm@48080000 {
+ compatible = "ti,am3352-elm";
+ reg = <0x48080000 0x2000>;
+ interrupts = <4>;
+ ti,hwmods = "elm";
+ status = "disabled";
+ };
+
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
*/
/dts-v1/;
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
/ {
model = "TI AM3517 EVM (AM3517/05)";
*/
/dts-v1/;
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
/ {
model = "TeeJet Mt.Ventoux";
--- /dev/null
+/*
+ * Device Tree Source for AM4372 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "ti,am4372", "ti,am43";
+ interrupt-parent = <&gic>;
+
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ };
+ };
+
+ gic: interrupt-controller@48241000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48241000 0x1000>,
+ <0x48240100 0x0100>;
+ };
+
+ ocp {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ uart0: serial@44e09000 {
+ compatible = "ti,am4372-uart","ti,omap2-uart";
+ reg = <0x44e09000 0x2000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer1: timer@44e31000 {
+ compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
+ reg = <0x44e31000 0x400>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-alwon;
+ };
+
+ timer2: timer@48040000 {
+ compatible = "ti,am4372-timer","ti,am335x-timer";
+ reg = <0x48040000 0x400>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ counter32k: counter@44e86000 {
+ compatible = "ti,am4372-counter32k","ti,omap-counter32k";
+ reg = <0x44e86000 0x40>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM43x EPOS EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+
+/ {
+ model = "TI AM43x EPOS EVM";
+ compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
+};
*/
status = "disabled";
/* No CD or WP GPIOs */
+ broken-cd;
};
usb@50000 {
* No CD or WP GPIOs: SDIO interface used for
* Wifi/Bluetooth chip
*/
+ broken-cd;
};
usb@50000 {
pinctrl-names = "default";
status = "okay";
/* No CD or WP GPIOs */
+ broken-cd;
};
usb@50000 {
gpios = <&gpio0 6 1>;
};
};
+
+ pcie-controller {
+ status = "okay";
+
+ /* Internal mini-PCIe connector */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Internal mini-PCIe connector */
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
};
};
};
model = "Marvell Armada 370 and XP SoC";
compatible = "marvell,armada-370-xp";
+ aliases {
+ eth0 = ð0;
+ eth1 = ð1;
+ };
+
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
compatible = "marvell,sheeva-v7";
+ device_type = "cpu";
+ reg = <0>;
};
};
reg = <0x72004 0x4>;
};
- ethernet@70000 {
+ eth0: ethernet@70000 {
compatible = "marvell,armada-370-neta";
reg = <0x70000 0x4000>;
interrupts = <8>;
status = "disabled";
};
- ethernet@74000 {
+ eth1: ethernet@74000 {
compatible = "marvell,armada-370-neta";
reg = <0x74000 0x4000>;
interrupts = <10>;
reg = <0xd4000 0x200>;
interrupts = <54>;
clocks = <&gateclk 17>;
+ bus-width = <4>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
status = "disabled";
};
bus-range = <0x00 0xff>;
- reg = <0x40000 0x2000>, <0x80000 0x2000>;
-
- reg-names = "pcie0.0", "pcie1.0";
-
ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
};
soc {
+ ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */
+ 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
+ 0xf0000000 0 0xf0000000 0x1000000>; /* Device Bus, NOR 16MiB */
+
internal-regs {
serial@12000 {
clock-frequency = <250000000>;
pinctrl-names = "default";
status = "okay";
/* No CD or WP GPIOs */
+ broken-cd;
};
usb@50000 {
status = "okay";
};
};
+
+ devbus-bootcs@10400 {
+ status = "okay";
+ ranges = <0 0xf0000000 0x1000000>;
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+
+ /* NOR 16 MiB */
+ nor@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x1000000>;
+ bank-width = <2>;
+ };
+ };
};
};
};
phy-mode = "rgmii-id";
};
+ /* Front-side USB slot */
+ usb@50000 {
+ status = "okay";
+ };
+
+ /* Back-side USB slot */
+ usb@51000 {
+ status = "okay";
+ };
+
spi0: spi@10600 {
status = "okay";
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
+ eth3 = ð3;
};
interrupts = <91>;
};
- ethernet@34000 {
+ eth3: ethernet@34000 {
compatible = "marvell,armada-370-neta";
reg = <0x34000 0x4000>;
interrupts = <14>;
nr-ports = <2>;
status = "okay";
};
+
+ /* Front side USB 0 */
usb@50000 {
status = "okay";
};
+
+ /* Front side USB 1 */
usb@51000 {
status = "okay";
};
+ /* USB interface in the mini-PCIe connector */
+ usb@52000 {
+ status = "okay";
+ };
+
devbus-bootcs@10400 {
status = "okay";
ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */
model = "Marvell Armada XP family SoC";
compatible = "marvell,armadaxp", "marvell,armada-370-xp";
+ aliases {
+ eth2 = ð2;
+ };
+
soc {
internal-regs {
L2: l2-cache {
reg = <0x18200 0x500>;
};
- ethernet@30000 {
+ eth2: ethernet@30000 {
compatible = "marvell,armada-370-neta";
reg = <0x30000 0x4000>;
interrupts = <12>;
serial3 = &usart2;
serial4 = &usart3;
serial5 = &uart0;
+ serial6 = &uart1;
};
chosen {
status = "okay";
};
+ /*
+ * UART0/1 pins are marked as GPIO on
+ * Aria documentation.
+ * Change to "okay" if you need additional serial ports
+ */
uart0: serial@f8040000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xf8040000 0x200>;
- interrupts = <15 4 5>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- status = "okay";
+ status = "disabled";
+ };
+
+ uart1: serial@f8044000 {
+ status = "disabled";
};
adc0: adc@f804c000 {
};
};
};
+
+ rtc@fffffeb0 {
+ status = "okay";
+ };
};
usb0: ohci@00600000 {
--- /dev/null
+/*
+ * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board
+ *
+ * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC)
+ *
+ * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+ model = "Acme Systems FoxG20";
+ compatible = "acme,foxg20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ mmc0: mmc@fffa8000 {
+ pinctrl-0 = <
+ &pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot1_cmd_dat0
+ &pinctrl_mmc0_slot1_dat1_3>;
+ status = "okay";
+
+ slot@1 {
+ reg = <1>;
+ bus-width = <4>;
+ };
+ };
+
+ usart0: serial@fffb0000 {
+ pinctrl-0 =
+ <&pinctrl_usart0
+ &pinctrl_usart0_rts
+ &pinctrl_usart0_cts
+ >;
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ status = "okay";
+ };
+
+ usart2: serial@fffb8000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usart3: serial@fffd0000 {
+ status = "okay";
+ };
+
+ uart0: serial@fffd4000 {
+ status = "okay";
+ };
+
+ uart1: serial@fffd8000 {
+ status = "okay";
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ pinctrl@fffff400 {
+ board {
+ pinctrl_pck0_as_mck: pck0_as_mck {
+ atmel,pins =
+ <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ mmc0_slot1 {
+ pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+ atmel,pins =
+ <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* CD pin */
+ };
+ };
+
+ i2c0 {
+ pinctrl_i2c0: i2c0-0 {
+ atmel,pins =
+ <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* TWD (SDA), open drain */
+ AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* TWCK (SCL), open drain */
+ };
+ };
+ };
+
+ watchdog@fffffd40 {
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+ };
+
+ i2c@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ i2c-gpio,delay-us = <5>; /* ~85 kHz */
+ status = "okay";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* red LED marked "PC7" near mini USB (device) receptacle */
+ user_led {
+ label = "user_led";
+ gpios = <&pioC 7 GPIO_ACTIVE_HIGH>; /* PC7 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ btn {
+ label = "Button";
+ gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
+ linux,code = <0x103>;
+ gpio-key,wakeup;
+ };
+ };
+};
ssc2 = &ssc2;
};
cpus {
- cpu@0 {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
compatible = "arm,arm920t";
+ device_type = "cpu";
};
};
};
};
+ tcb0 {
+ pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+ atmel,pins = <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+ atmel,pins = <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+ atmel,pins = <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+ atmel,pins = <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+ atmel,pins = <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+ atmel,pins = <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+ atmel,pins = <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+ atmel,pins = <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+ atmel,pins = <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ tcb1 {
+ pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+ atmel,pins = <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+ atmel,pins = <AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+ atmel,pins = <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+ atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+ atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+ atmel,pins = <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+ atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+ atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+ atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA0 periph A SPI0_MISO pin */
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A SPI0_MOSI pin */
+ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A SPI0_SPCK pin */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
+
+ spi0: spi@fffe0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffe0000 0x200>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
status = "okay";
};
+
+ spi0: spi@fffe0000 {
+ status = "okay";
+ cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
+ mtd_dataflash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <15000000>;
+ reg = <0>;
+ };
+ };
};
usb0: ohci@00300000 {
ssc0 = &ssc0;
};
cpus {
- cpu@0 {
- compatible = "arm,arm926ejs";
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
};
};
};
};
+ i2c_gpio0 {
+ pinctrl_i2c_gpio0: i2c_gpio0-0 {
+ atmel,pins =
+ <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
+ AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+ };
+ };
+
+ tcb0 {
+ pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+ atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+ atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+ atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+ atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+ atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+ atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+ atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+ atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+ atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ tcb1 {
+ pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+ atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+ atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+ atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+ atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+ atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+ atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+ atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+ atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+ atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_gpio0>;
status = "disabled";
};
};
ssc1 = &ssc1;
};
cpus {
- cpu@0 {
- compatible = "arm,arm926ejs";
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
};
};
};
};
+ tcb0 {
+ pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+ atmel,pins = <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+ atmel,pins = <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+ atmel,pins = <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+ atmel,pins = <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+ atmel,pins = <AT91_PIOE 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+ atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+ atmel,pins = <AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+ atmel,pins = <AT91_PIOE 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+ atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
reg = <0>;
};
};
+
+ watchdog@fffffd40 {
+ status = "okay";
+ };
};
nand0: nand@40000000 {
reg = <1>;
};
};
+
+ watchdog@fffffd40 {
+ status = "okay";
+ };
};
nand0: nand@40000000 {
*/
#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
ssc1 = &ssc1;
};
cpus {
- cpu@0 {
- compatible = "arm,arm926ejs";
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
};
};
};
};
+ tcb0 {
+ pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+ atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+ atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+ atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+ atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+ atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+ atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+ atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+ atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+ atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ tcb1 {
+ pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+ atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+ atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+ atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+ atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+ atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+ atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+ atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+ atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+ atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma 1 0>;
+ dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,hsmci";
reg = <0xfffd0000 0x600>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma 1 13>;
+ dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
+
+ usb2: gadget@fff78000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9rl-udc";
+ reg = <0x00600000 0x80000
+ 0xfff78000 0x400>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+
+ ep0 {
+ reg = <0>;
+ atmel,fifo-size = <64>;
+ atmel,nb-banks = <1>;
+ };
+
+ ep1 {
+ reg = <1>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep2 {
+ reg = <2>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep3 {
+ reg = <3>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ };
+
+ ep4 {
+ reg = <4>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ };
+
+ ep5 {
+ reg = <5>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep6 {
+ reg = <6>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+ };
};
nand0: nand@40000000 {
status = "okay";
};
+ watchdog@fffffd40 {
+ status = "okay";
+ };
+
mmc0: mmc@fff80000 {
pinctrl-0 = <
&pinctrl_board_mmc0
reg = <0>;
};
};
+
+ usb2: gadget@fff78000 {
+ atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
};
nand0: nand@40000000 {
*/
#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
ssc0 = &ssc0;
};
cpus {
- cpu@0 {
- compatible = "arm,arm926ejs";
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
};
};
compatible = "atmel,hsmci";
reg = <0xf0008000 0x600>;
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma 1 0>;
+ dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
};
};
+ tcb0 {
+ pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+ atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+ atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+ atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+ atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+ atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+ atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+ atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+ atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+ atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ tcb1 {
+ pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+ atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+ atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+ atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+ atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+ atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+ atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+ atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+ atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+ atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8010000 0x100>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
- dmas = <&dma 1 13>,
- <&dma 1 14>;
+ dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>,
+ <&dma 1 AT91_DMA_CFG_PER_ID(14)>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8014000 0x100>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
- dmas = <&dma 1 15>,
- <&dma 1 16>;
+ dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>,
+ <&dma 1 AT91_DMA_CFG_PER_ID(16)>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xf0000000 0x100>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma 1 AT91_DMA_CFG_PER_ID(1)>,
+ <&dma 1 AT91_DMA_CFG_PER_ID(2)>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
compatible = "atmel,at91rm9200-spi";
reg = <0xf0004000 0x100>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma 1 AT91_DMA_CFG_PER_ID(3)>,
+ <&dma 1 AT91_DMA_CFG_PER_ID(4)>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
+
+ watchdog@fffffe40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffe40 0x10>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
reg = <0>;
};
};
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
};
nand0: nand@40000000 {
*/
#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
ssc0 = &ssc0;
};
cpus {
- cpu@0 {
- compatible = "arm,arm926ejs";
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
};
};
};
};
+ tcb0 {
+ pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+ atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+ atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+ atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+ atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+ atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+ atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+ atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+ atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+ atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ tcb1 {
+ pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+ atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+ atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+ atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+ atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+ atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+ atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+ atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+ atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+ atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
compatible = "atmel,hsmci";
reg = <0xf0008000 0x600>;
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma0 1 0>;
+ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,hsmci";
reg = <0xf000c000 0x600>;
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma1 1 0>;
+ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8010000 0x100>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
- dmas = <&dma0 1 7>,
- <&dma0 1 8>;
+ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
+ <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8014000 0x100>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
- dmas = <&dma1 1 5>,
- <&dma1 1 6>;
+ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
+ <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8018000 0x100>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
- dmas = <&dma0 1 9>,
- <&dma0 1 10>;
+ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
+ <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ uart0: serial@f8040000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8040000 0x200>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "disabled";
+ };
+
+ uart1: serial@f8044000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8044000 0x200>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "disabled";
+ };
+
adc0: adc@f804c000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xf804c000 0x100>;
compatible = "atmel,at91rm9200-spi";
reg = <0xf0000000 0x100>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
+ <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
compatible = "atmel,at91rm9200-spi";
reg = <0xf0004000 0x100>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
+ <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
+ usb2: gadget@f803c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9rl-udc";
+ reg = <0x00500000 0x80000
+ 0xf803c000 0x400>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+
+ ep0 {
+ reg = <0>;
+ atmel,fifo-size = <64>;
+ atmel,nb-banks = <1>;
+ };
+
+ ep1 {
+ reg = <1>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep2 {
+ reg = <2>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep3 {
+ reg = <3>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ };
+
+ ep4 {
+ reg = <4>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ };
+
+ ep5 {
+ reg = <5>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep6 {
+ reg = <6>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+ };
+
+ watchdog@fffffe40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffe40 0x10>;
+ status = "disabled";
+ };
+
rtc@fffffeb0 {
- compatible = "atmel,at91rm9200-rtc";
+ compatible = "atmel,at91sam9x5-rtc";
reg = <0xfffffeb0 0x40>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
status = "disabled";
status = "okay";
};
+ usb2: gadget@f803c000 {
+ atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
i2c0: i2c@f8010000 {
status = "okay";
};
reg = <0>;
};
};
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
};
usb0: ohci@00600000 {
/dts-v1/;
-/include/ "bcm11351.dtsi"
+#include "bcm11351.dtsi"
/ {
model = "BCM11351 BRT board";
status = "okay";
};
+ sdio0: sdio@0x3f180000 {
+ max-frequency = <48000000>;
+ status = "okay";
+ };
+
+ sdio1: sdio@0x3f190000 {
+ non-removable;
+ max-frequency = <48000000>;
+ status = "okay";
+ };
+
+ sdio3: sdio@0x3f1b0000 {
+ max-frequency = <48000000>;
+ status = "okay";
+ };
+
+
};
* GNU General Public License for more details.
*/
-/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
/ {
model = "BCM11351 SoC";
smc@0x3404c000 {
compatible = "bcm,bcm11351-smc", "bcm,kona-smc";
- reg = <0x3404c000 0x400>; //1 KiB in SRAM
+ reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
};
uart@3e000000 {
status = "disabled";
reg = <0x3e000000 0x1000>;
clock-frequency = <13000000>;
- interrupts = <0x0 67 0x4>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
};
timer@35006000 {
compatible = "bcm,kona-timer";
reg = <0x35006000 0x1000>;
- interrupts = <0x0 7 0x4>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <32768>;
};
+ sdio0: sdio@0x3f180000 {
+ compatible = "bcm,kona-sdhci";
+ reg = <0x3f180000 0x10000>;
+ interrupts = <0x0 77 0x4>;
+ status = "disabled";
+ };
+
+ sdio1: sdio@0x3f190000 {
+ compatible = "bcm,kona-sdhci";
+ reg = <0x3f190000 0x10000>;
+ interrupts = <0x0 76 0x4>;
+ status = "disabled";
+ };
+
+ sdio2: sdio@0x3f1a0000 {
+ compatible = "bcm,kona-sdhci";
+ reg = <0x3f1a0000 0x10000>;
+ interrupts = <0x0 74 0x4>;
+ status = "disabled";
+ };
+
+ sdio3: sdio@0x3f1b0000 {
+ compatible = "bcm,kona-sdhci";
+ reg = <0x3f1b0000 0x10000>;
+ interrupts = <0x0 73 0x4>;
+ status = "disabled";
+ };
+
};
memory {
reg = <0 0x10000000>;
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ act {
+ label = "ACT";
+ gpios = <&gpio 16 1>;
+ default-state = "keep";
+ linux,default-trigger = "heartbeat";
+ };
+ };
};
&gpio {
--- /dev/null
+/*
+ * Copyright 2013 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "dbx5x0.dtsi"
+
+/ {
+ model = "ST-Ericsson U8540 platform with Device Tree";
+ compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
+
+ memory@0 {
+ reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
+ };
+
+ soc {
+ prcmu@80157000 {
+ reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
+ reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
+ };
+
+ uart@80120000 {
+ status = "okay";
+ };
+
+ uart@80121000 {
+ status = "okay";
+ };
+
+ uart@80007000 {
+ status = "okay";
+ };
+ };
+};
*/
/dts-v1/;
-/include/ "dbx5x0.dtsi"
+#include "dbx5x0.dtsi"
/ {
model = "ST-Ericsson CCU9540 platform with Device Tree";
reg = <0x00000000 0x20000000>;
};
- soc-u9500 {
+ soc {
uart@80120000 {
status = "okay";
};
// WLAN SDIO channel
sdi1_per2@80118000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <4>;
status = "okay";
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "skeleton.dtsi"
/ {
- soc-u9500 {
+ soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "stericsson,db8500";
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xa0412000 0x1000>;
- interrupts = <0 13 4>;
+ interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
cache-unified;
cache-level = <2>;
};
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 7 0x4>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
timer@a0410600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xa0410600 0x20>;
- interrupts = <1 13 0x304>;
+ interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
};
rtc@80154000 {
compatible = "arm,rtc-pl031", "arm,primecell";
reg = <0x80154000 0x1000>;
- interrupts = <0 18 0x4>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
};
gpio0: gpio@8012e000 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8012e000 0x80>;
- interrupts = <0 119 0x4>;
+ interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8012e080 0x80>;
- interrupts = <0 120 0x4>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e000 0x80>;
- interrupts = <0 121 0x4>;
+ interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e080 0x80>;
- interrupts = <0 122 0x4>;
+ interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e100 0x80>;
- interrupts = <0 123 0x4>;
+ interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e180 0x80>;
- interrupts = <0 124 0x4>;
+ interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8011e000 0x80>;
- interrupts = <0 125 0x4>;
+ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8011e080 0x80>;
- interrupts = <0 126 0x4>;
+ interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0xa03fe000 0x80>;
- interrupts = <0 127 0x4>;
+ interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
};
pinctrl {
- compatible = "stericsson,nmk-pinctrl";
+ compatible = "stericsson,db8500-pinctrl";
prcm = <&prcmu>;
};
- usb@a03e0000 {
+ usb_per5@a03e0000 {
compatible = "stericsson,db8500-musb",
"mentor,musb";
reg = <0xa03e0000 0x10000>;
- interrupts = <0 23 0x4>;
- };
-
- dma-controller@801C0000 {
- compatible = "stericsson,db8500-dma40",
- "stericsson,dma40";
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+
+ dr_mode = "otg";
+
+ dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
+ <&dma 38 0 0x0>, /* Logical - MemToDev */
+ <&dma 37 0 0x2>, /* Logical - DevToMem */
+ <&dma 37 0 0x0>, /* Logical - MemToDev */
+ <&dma 36 0 0x2>, /* Logical - DevToMem */
+ <&dma 36 0 0x0>, /* Logical - MemToDev */
+ <&dma 19 0 0x2>, /* Logical - DevToMem */
+ <&dma 19 0 0x0>, /* Logical - MemToDev */
+ <&dma 18 0 0x2>, /* Logical - DevToMem */
+ <&dma 18 0 0x0>, /* Logical - MemToDev */
+ <&dma 17 0 0x2>, /* Logical - DevToMem */
+ <&dma 17 0 0x0>, /* Logical - MemToDev */
+ <&dma 16 0 0x2>, /* Logical - DevToMem */
+ <&dma 16 0 0x0>, /* Logical - MemToDev */
+ <&dma 39 0 0x2>, /* Logical - DevToMem */
+ <&dma 39 0 0x0>; /* Logical - MemToDev */
+
+ dma-names = "iep_1_9", "oep_1_9",
+ "iep_2_10", "oep_2_10",
+ "iep_3_11", "oep_3_11",
+ "iep_4_12", "oep_4_12",
+ "iep_5_13", "oep_5_13",
+ "iep_6_14", "oep_6_14",
+ "iep_7_15", "oep_7_15",
+ "iep_8", "oep_8";
+ };
+
+ dma: dma-controller@801C0000 {
+ compatible = "stericsson,db8500-dma40", "stericsson,dma40";
reg = <0x801C0000 0x1000 0x40010000 0x800>;
- interrupts = <0 25 0x4>;
+ reg-names = "base", "lcpa";
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+
+ #dma-cells = <3>;
+ memcpy-channels = <56 57 58 59 60>;
};
prcmu: prcmu@80157000 {
compatible = "stericsson,db8500-prcmu";
reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
- interrupts = <0 47 0x4>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
thermal@801573c0 {
compatible = "stericsson,db8500-thermal";
reg = <0x801573c0 0x40>;
- interrupts = <21 0x4>, <22 0x4>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
+ <22 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
status = "disabled";
};
ab8500 {
compatible = "stericsson,ab8500";
interrupt-parent = <&intc>;
- interrupts = <0 40 0x4>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
ab8500-rtc {
compatible = "stericsson,ab8500-rtc";
- interrupts = <17 0x4
- 18 0x4>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH
+ 18 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "60S", "ALARM";
};
ab8500-gpadc {
compatible = "stericsson,ab8500-gpadc";
- interrupts = <32 0x4
- 39 0x4>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH
+ 39 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "HW_CONV_END", "SW_CONV_END";
vddadc-supply = <&ab8500_ldo_tvout_reg>;
};
ab8500_usb {
compatible = "stericsson,ab8500-usb";
- interrupts = < 90 0x4
- 96 0x4
- 14 0x4
- 15 0x4
- 79 0x4
- 74 0x4
- 75 0x4>;
+ interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
+ 96 IRQ_TYPE_LEVEL_HIGH
+ 14 IRQ_TYPE_LEVEL_HIGH
+ 15 IRQ_TYPE_LEVEL_HIGH
+ 79 IRQ_TYPE_LEVEL_HIGH
+ 74 IRQ_TYPE_LEVEL_HIGH
+ 75 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ID_WAKEUP_R",
"ID_WAKEUP_F",
"VBUS_DET_F",
"USB_LINK_STATUS",
"USB_ADP_PROBE_PLUG",
"USB_ADP_PROBE_UNPLUG";
- vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
+ vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
v-ape-supply = <&db8500_vape_reg>;
musb_1v8-supply = <&db8500_vsmps2_reg>;
};
ab8500-ponkey {
compatible = "stericsson,ab8500-poweron-key";
- interrupts = <6 0x4
- 7 0x4>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH
+ 7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
};
codec: ab8500-codec {
compatible = "stericsson,ab8500-codec";
+ V-AUD-supply = <&ab8500_ldo_audio_reg>;
+ V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+ V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+ V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
+
stericsson,earpeice-cmv = <950>; /* Units in mV. */
};
};
// supply for v-intcore12; VINTCORE12 LDO
- ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
- regulator-compatible = "ab8500_ldo_initcore";
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+ regulator-compatible = "ab8500_ldo_intcore";
};
// supply for tvout; gpadc; TVOUT LDO
regulator-compatible = "ab8500_ldo_audio";
};
- // supply for v-anamic1 VAMic1-LDO
+ // supply for v-anamic1 VAMIC1 LDO
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
regulator-compatible = "ab8500_ldo_anamic1";
};
// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
- ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
- regulator-compatible = "ab8500_ldo_amamic2";
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+ regulator-compatible = "ab8500_ldo_anamic2";
};
// supply for v-dmic; VDMIC LDO
i2c@80004000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80004000 0x1000>;
- interrupts = <0 21 0x4>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
arm,primecell-periphid = <0x180024>;
#address-cells = <1>;
i2c@80122000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80122000 0x1000>;
- interrupts = <0 22 0x4>;
+ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
arm,primecell-periphid = <0x180024>;
#address-cells = <1>;
i2c@80128000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80128000 0x1000>;
- interrupts = <0 55 0x4>;
+ interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
arm,primecell-periphid = <0x180024>;
#address-cells = <1>;
i2c@80110000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80110000 0x1000>;
- interrupts = <0 12 0x4>;
+ interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
arm,primecell-periphid = <0x180024>;
#address-cells = <1>;
i2c@8012a000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x8012a000 0x1000>;
- interrupts = <0 51 0x4>;
+ interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
arm,primecell-periphid = <0x180024>;
#address-cells = <1>;
ssp@80002000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80002000 0x1000>;
- interrupts = <0 14 0x4>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
-
- // Add one of these for each child device
- cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
- &gpio6 22 0x4 &gpio7 0 0x4>;
-
};
uart@80120000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80120000 0x1000>;
- interrupts = <0 11 0x4>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
+ <&dma 13 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
status = "disabled";
};
+
uart@80121000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80121000 0x1000>;
- interrupts = <0 19 0x4>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
+ <&dma 12 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
status = "disabled";
};
+
uart@80007000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80007000 0x1000>;
- interrupts = <0 26 0x4>;
+ interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
+ <&dma 11 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
status = "disabled";
};
sdi0_per1@80126000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80126000 0x1000>;
- interrupts = <0 60 0x4>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
+ <&dma 29 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
status = "disabled";
};
sdi1_per2@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
- interrupts = <0 50 0x4>;
+ interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
+ <&dma 32 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
status = "disabled";
};
sdi2_per3@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
- interrupts = <0 41 0x4>;
+ interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
+ <&dma 28 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
status = "disabled";
};
sdi3_per2@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
- interrupts = <0 59 0x4>;
+ interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
sdi4_per2@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
- interrupts = <0 99 0x4>;
+ interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
+ <&dma 42 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
status = "disabled";
};
sdi5_per3@80008000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80008000 0x1000>;
- interrupts = <0 100 0x4>;
+ interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
msp0: msp@80123000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80123000 0x1000>;
- interrupts = <0 31 0x4>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
status = "disabled";
};
msp1: msp@80124000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80124000 0x1000>;
- interrupts = <0 62 0x4>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
status = "disabled";
};
msp2: msp@80117000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80117000 0x1000>;
- interrupts = <0 98 0x4>;
+ interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
status = "disabled";
};
msp3: msp@80125000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80125000 0x1000>;
- interrupts = <0 62 0x4>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
status = "disabled";
};
status = "disabled";
};
+
+ cryp@a03cb000 {
+ compatible = "stericsson,ux500-cryp";
+ reg = <0xa03cb000 0x1000>;
+ interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+
+ v-ape-supply = <&db8500_vape_reg>;
+ };
+
+ hash@a03c2000 {
+ compatible = "stericsson,ux500-hash";
+ reg = <0xa03c2000 0x1000>;
+
+ v-ape-supply = <&db8500_vape_reg>;
+ };
};
};
gpio = <&gpio0 1 0>;
};
};
+
+ clocks {
+ /* 25MHz reference crystal */
+ ref25: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+ };
};
&uart0 { status = "okay"; };
&sata0 { status = "okay"; };
-&i2c0 { status = "okay"; };
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ si5351: clock-generator {
+ compatible = "silabs,si5351a-msop";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+
+ /* connect xtal input to 25MHz reference */
+ clocks = <&ref25>;
+
+ /* connect xtal input as source of pll0 and pll1 */
+ silabs,pll-source = <0 0>, <1 0>;
+
+ clkout0 {
+ reg = <0>;
+ silabs,drive-strength = <8>;
+ silabs,multisynth-source = <0>;
+ silabs,clock-source = <0>;
+ silabs,pll-master;
+ };
+
+ clkout1 {
+ reg = <1>;
+ silabs,drive-strength = <8>;
+ silabs,multisynth-source = <1>;
+ silabs,clock-source = <0>;
+ silabs,pll-master;
+ };
+
+ clkout2 {
+ reg = <2>;
+ silabs,multisynth-source = <1>;
+ silabs,clock-source = <0>;
+ };
+ };
+};
&sdio0 {
status = "okay";
reg = <0x13400000 0x10000>;
interrupts = <0 94 0>;
samsung,power-domain = <&pd_mfc>;
+ clocks = <&clock 170>, <&clock 273>;
+ clock-names = "sclk_mfc", "mfc";
status = "disabled";
};
enable-active-high;
};
+ tmu@100C0000 {
+ status = "okay";
+ };
+
sdhci@12530000 {
bus-width = <4>;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
status = "okay";
};
+ i2c@13860000 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ pinctrl-0 = <&i2c0_bus>;
+ pinctrl-names = "default";
+
+ max8997_pmic@66 {
+ compatible = "maxim,max8997-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 0>, <3 0>;
+
+ max8997,pmic-buck1-dvs-voltage = <1350000>;
+ max8997,pmic-buck2-dvs-voltage = <1100000>;
+ max8997,pmic-buck5-dvs-voltage = <1200000>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ABB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_ALIVE_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VMIPI_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD_RTC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VMIPI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD_AUD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VADC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "DVDD_SWB_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD_PLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_AUD_3V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "AVDD18_SWB_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDD_SWB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VDD_MIF_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_ARM_1.2V";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VDD_INT_1.1V";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VDD_G3D_1.1V";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDDQ_M1M2_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VDD_LCD_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
clock-frequency = <24000000>;
};
};
+
+ fimd@11c00000 {
+ pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing {
+ clock-frequency = <50000>;
+ hactive = <1024>;
+ vactive = <600>;
+ hfront-porch = <64>;
+ hback-porch = <16>;
+ hsync-len = <48>;
+ vback-porch = <64>;
+ vfront-porch = <16>;
+ vsync-len = <3>;
+ };
+ };
};
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
+
+ pwm0_out: pwm0-out {
+ samsung,pins = "gpd0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm1_out: pwm1-out {
+ samsung,pins = "gpd0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm2_out: pwm2-out {
+ samsung,pins = "gpd0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm3_out: pwm3-out {
+ samsung,pins = "gpd0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lcd_ctrl: lcd-ctrl {
+ samsung,pins = "gpd0-0", "gpd0-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lcd_sync: lcd-sync {
+ samsung,pins = "gpf0-0", "gpf0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lcd_en: lcd-en {
+ samsung,pins = "gpe3-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lcd_clk: lcd-clk {
+ samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lcd_data16: lcd-data-width16 {
+ samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
+ "gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
+ "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
+ "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lcd_data18: lcd-data-width18 {
+ samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
+ "gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
+ "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+ "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
+ "gpf3-2", "gpf3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lcd_data24: lcd-data-width24 {
+ samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+ "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+ "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+ "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+ "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+ "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
};
pinctrl@11000000 {
interrupt-parent = <&combiner>;
reg = <0x100C0000 0x100>;
interrupts = <2 4>;
+ clocks = <&clock 383>;
+ clock-names = "tmu_apbif";
+ status = "disabled";
};
g2d@12800000 {
compatible = "samsung,s5pv210-g2d";
reg = <0x12800000 0x1000>;
interrupts = <0 89 0>;
+ clocks = <&clock 177>, <&clock 277>;
+ clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled";
};
};
#size-cells = <0>;
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
pinctrl-names = "default";
+ vmmc-supply = <&ldo20_reg &buck8_reg>;
status = "okay";
num-slots = <1>;
bus-width = <4>;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
pinctrl-names = "default";
+ vmmc-supply = <&ldo4_reg &ldo21_reg>;
status = "okay";
};
clock-frequency = <24000000>;
};
};
+
+ i2c@13860000 {
+ pinctrl-0 = <&i2c0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ max77686: pmic@09 {
+ compatible = "maxim,max77686";
+ reg = <0x09>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_M1_2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDDQ_EXT_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDDQ_MMC2_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDDQ_MMC1_3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD10_MPLL_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD10_XPLL_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD18_ABB1_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD33_USB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDQ_C2C_W_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB0_2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_HSIC_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "LDO20_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "LDO21_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "VDDQ_LCD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-microvolt-offset = <50000>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDDQ_CKEM1_2_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "BUCK6_1.35V";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "BUCK7_2.0V";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "BUCK8_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
};
enable-active-high;
};
+ pinctrl@11000000 {
+ keypad_rows: keypad-rows {
+ samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ keypad_cols: keypad-cols {
+ samsung,pins = "gpx1-0", "gpx1-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
+ keypad@100A0000 {
+ samsung,keypad-num-rows = <3>;
+ samsung,keypad-num-columns = <2>;
+ linux,keypad-no-autorepeat;
+ linux,keypad-wakeup;
+ pinctrl-0 = <&keypad_rows &keypad_cols>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ key_home {
+ keypad,row = <0>;
+ keypad,column = <0>;
+ linux,code = <102>;
+ };
+
+ key_down {
+ keypad,row = <0>;
+ keypad,column = <1>;
+ linux,code = <108>;
+ };
+
+ key_up {
+ keypad,row = <1>;
+ keypad,column = <0>;
+ linux,code = <103>;
+ };
+
+ key_menu {
+ keypad,row = <1>;
+ keypad,column = <1>;
+ linux,code = <139>;
+ };
+
+ key_back {
+ keypad,row = <2>;
+ keypad,column = <0>;
+ linux,code = <158>;
+ };
+
+ key_enter {
+ keypad,row = <2>;
+ keypad,column = <1>;
+ linux,code = <28>;
+ };
+ };
+
+ g2d@10800000 {
+ status = "okay";
+ };
+
sdhci@12530000 {
bus-width = <4>;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
status = "okay";
};
- g2d@10800000 {
+ pinctrl@11000000 {
+ keypad_rows: keypad-rows {
+ samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ keypad_cols: keypad-cols {
+ samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+ "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
+ keypad@100A0000 {
+ samsung,keypad-num-rows = <3>;
+ samsung,keypad-num-columns = <8>;
+ linux,keypad-no-autorepeat;
+ linux,keypad-wakeup;
+ pinctrl-0 = <&keypad_rows &keypad_cols>;
+ pinctrl-names = "default";
status = "okay";
+
+ key_1 {
+ keypad,row = <1>;
+ keypad,column = <3>;
+ linux,code = <2>;
+ };
+
+ key_2 {
+ keypad,row = <1>;
+ keypad,column = <4>;
+ linux,code = <3>;
+ };
+
+ key_3 {
+ keypad,row = <1>;
+ keypad,column = <5>;
+ linux,code = <4>;
+ };
+
+ key_4 {
+ keypad,row = <1>;
+ keypad,column = <6>;
+ linux,code = <5>;
+ };
+
+ key_5 {
+ keypad,row = <1>;
+ keypad,column = <7>;
+ linux,code = <6>;
+ };
+
+ key_A {
+ keypad,row = <2>;
+ keypad,column = <6>;
+ linux,code = <30>;
+ };
+
+ key_B {
+ keypad,row = <2>;
+ keypad,column = <7>;
+ linux,code = <48>;
+ };
+
+ key_C {
+ keypad,row = <0>;
+ keypad,column = <5>;
+ linux,code = <46>;
+ };
+
+ key_D {
+ keypad,row = <2>;
+ keypad,column = <5>;
+ linux,code = <32>;
+ };
+
+ key_E {
+ keypad,row = <0>;
+ keypad,column = <7>;
+ linux,code = <18>;
+ };
};
sdhci@12530000 {
samsung,pin-drv = <3>;
};
- keypad_col0: keypad-col0 {
- samsung,pins = "gpl2-0";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- keypad_col1: keypad-col1 {
- samsung,pins = "gpl2-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- keypad_col2: keypad-col2 {
- samsung,pins = "gpl2-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- keypad_col3: keypad-col3 {
- samsung,pins = "gpl2-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- keypad_col4: keypad-col4 {
- samsung,pins = "gpl2-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- keypad_col5: keypad-col5 {
- samsung,pins = "gpl2-5";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- keypad_col6: keypad-col6 {
- samsung,pins = "gpl2-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- keypad_col7: keypad-col7 {
- samsung,pins = "gpl2-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
cam_port_b: cam-port-b {
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
pinctrl3 = &pinctrl_3;
};
- combiner:interrupt-controller@10440000 {
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
- <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>;
- };
-
clock: clock-controller@0x10030000 {
compatible = "samsung,exynos4412-clock";
reg = <0x10030000 0x20000>;
compatible = "samsung,exynos4212-g2d";
reg = <0x10800000 0x1000>;
interrupts = <0 89 0>;
+ clocks = <&clock 177>, <&clock 277>;
+ clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled";
};
};
clock-frequency = <24000000>;
};
};
+
+ dp-controller {
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+ };
+
+ fimd: fimd@14400000 {
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing@0 {
+ /* 2560x1600 DP panel */
+ clock-frequency = <50000>;
+ hactive = <2560>;
+ vactive = <1600>;
+ hfront-porch = <48>;
+ hback-porch = <80>;
+ hsync-len = <32>;
+ vback-porch = <16>;
+ vfront-porch = <8>;
+ vsync-len = <6>;
+ };
+ };
+ };
+
+ rtc {
+ status = "okay";
+ };
};
samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
};
+
+ dp_hpd: dp_hpd {
+ samsung,pins = "gpx0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
};
pinctrl@13400000 {
};
};
+ vdd:fixed-regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ dbvdd:fixed-regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "dbvdd-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ spkvdd:fixed-regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "spkvdd-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
i2c@12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
};
wm8994: wm8994@1a {
- compatible = "wlf,wm8994";
- reg = <0x1a>;
+ compatible = "wlf,wm8994";
+ reg = <0x1a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ AVDD2-supply = <&vdd>;
+ CPVDD-supply = <&vdd>;
+ DBVDD-supply = <&dbvdd>;
+ SPKVDD1-supply = <&spkvdd>;
+ SPKVDD2-supply = <&spkvdd>;
};
};
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
};
display-timings {
};
};
+ rtc {
+ status = "okay";
+ };
+
/*
* On Snow we've got SIP WiFi and so can keep drive strengths low to
* reduce EMI.
pinctrl-0 = <&i2s2_bus>;
};
+ usb@12000000 {
+ compatible = "samsung,exynos5250-dwusb3";
+ clocks = <&clock 286>;
+ clock-names = "usbdrd30";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dwc3 {
+ compatible = "synopsys,dwc3";
+ reg = <0x12000000 0x10000>;
+ interrupts = <0 72 0>;
+ usb-phy = <&usb2_phy &usb3_phy>;
+ };
+ };
+
+ usb3_phy: usbphy@12100000 {
+ compatible = "samsung,exynos5250-usb3phy";
+ reg = <0x12100000 0x100>;
+ clocks = <&clock 1>, <&clock 286>;
+ clock-names = "ext_xtal", "usbdrd30";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbphy-sys {
+ reg = <0x10040704 0x8>;
+ };
+ };
+
usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
clock-names = "usbhost";
};
- usbphy@12130000 {
+ usb2_phy: usbphy@12130000 {
compatible = "samsung,exynos5250-usb2phy";
reg = <0x12130000 0x100>;
clocks = <&clock 1>, <&clock 285>;
reg = <0x145b0000 0x1000>;
interrupts = <10 3>;
interrupt-parent = <&combiner>;
+ clocks = <&clock 342>;
+ clock-names = "dp";
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,sd5v1", "samsung,exynos5440";
chosen {
- bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200";
+ bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
};
fixed-rate-clocks {
compatible = "samsung,ssdk5440", "samsung,exynos5440";
chosen {
- bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200";
+ bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
};
- spi {
- status = "disabled";
+ spi_0: spi@D0000 {
+
+ flash: w25q128@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128";
+ spi-max-frequency = <15625000>;
+ reg = <0>;
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
+ };
+
+ partition@00000 {
+ label = "BootLoader";
+ reg = <0x60000 0x80000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "Recovery-Kernel";
+ reg = <0xe0000 0x300000>;
+ read-only;
+ };
+
+ partition@3e0000 {
+ label = "CRAM-FS";
+ reg = <0x3e0000 0x700000>;
+ read-only;
+ };
+
+ partition@ae0000 {
+ label = "User-Data";
+ reg = <0xae0000 0x520000>;
+ };
+
+ };
+
};
fixed-rate-clocks {
interrupt-parent = <&gic>;
+ aliases {
+ spi0 = &spi_0;
+ };
+
clock: clock-controller@0x160000 {
compatible = "samsung,exynos5440-clock";
reg = <0x160000 0x1000>;
#size-cells = <0>;
cpu@0 {
+ device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
};
cpu@1 {
+ device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
};
cpu@2 {
+ device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <2>;
};
cpu@3 {
+ device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <3>;
};
interrupts = <0 57 0>;
operating-points = <
/* KHz uV */
+ 1500000 1100000
+ 1400000 1075000
+ 1300000 1050000
1200000 1025000
+ 1100000 1000000
1000000 975000
+ 900000 950000
800000 925000
>;
};
clock-names = "uart", "clk_uart_baud0";
};
- spi {
- compatible = "samsung,exynos4210-spi";
- reg = <0xD0000 0x1000>;
+ spi_0: spi@D0000 {
+ compatible = "samsung,exynos5440-spi";
+ reg = <0xD0000 0x100>;
interrupts = <0 4 0>;
- tx-dma-channel = <&pdma0 5>; /* preliminary */
- rx-dma-channel = <&pdma0 4>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
clocks = <&clock 21>, <&clock 16>;
clock-names = "spi", "spi_busclk0";
};
compatible = "arm,amba-bus";
interrupt-parent = <&gic>;
ranges;
-
- pdma0: pdma@00121000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x121000 0x1000>;
- interrupts = <0 46 0>;
- clocks = <&clock 8>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- pdma1: pdma@00120000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x120000 0x1000>;
- interrupts = <0 47 0>;
- clocks = <&clock 8>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
};
rtc {
interrupts = <0 17 0>, <0 16 0>;
clocks = <&clock 21>;
clock-names = "rtc";
- status = "disabled";
+ };
+
+ sata@210000 {
+ compatible = "snps,exynos5440-ahci";
+ reg = <0x210000 0x10000>;
+ interrupts = <0 30 0>;
+ clocks = <&clock 23>;
+ clock-names = "sata";
+ };
+
+ ohci@220000 {
+ compatible = "samsung,exynos5440-ohci";
+ reg = <0x220000 0x1000>;
+ interrupts = <0 29 0>;
+ clocks = <&clock 24>;
+ clock-names = "usbhost";
+ };
+
+ ehci@221000 {
+ compatible = "samsung,exynos5440-ehci";
+ reg = <0x221000 0x1000>;
+ interrupts = <0 29 0>;
+ clocks = <&clock 24>;
+ clock-names = "usbhost";
};
pcie@290000 {
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "dbx5x0.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dbx5x0.dtsi"
/ {
memory {
};
};
- soc-u9500 {
+ soc {
uart@80120000 {
status = "okay";
};
compatible = "tc3589x";
reg = <0x42>;
interrupt-parent = <&gpio6>;
- interrupts = <25 0x1>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
tc3589x_gpio: tc3589x_gpio {
compatible = "tc3589x-gpio";
- interrupts = <0 0x1>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
};
i2c@80128000 {
- lp5521@0x33 {
- compatible = "lp5521";
+ lp5521@33 {
+ compatible = "national,lp5521";
reg = <0x33>;
+ label = "lp5521_pri";
+ clock-mode = /bits/ 8 <2>;
+ chan0 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
+ chan1 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
+ chan2 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
};
-
- lp5521@0x34 {
- compatible = "lp5521";
+ lp5521@34 {
+ compatible = "national,lp5521";
reg = <0x34>;
+ label = "lp5521_sec";
+ clock-mode = /bits/ 8 <2>;
+ chan0 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
+ chan1 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
+ chan2 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
};
-
- bh1780@0x29 {
+ bh1780@29 {
compatible = "rohm,bh1780gli";
reg = <0x33>;
};
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <4>;
mmc-cap-sd-highspeed;
mmc-cap-mmc-highspeed;
// WLAN SDIO channel
sdi1_per2@80118000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <4>;
status = "okay";
// PoP:ed eMMC
sdi2_per3@80005000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
// On-board eMMC
sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
regulator-name = "V-MMC-SD";
};
- ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
regulator-name = "V-INTCORE";
};
regulator-name = "V-AMIC1";
};
- ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
regulator-name = "V-AMIC2";
};
*/
/dts-v1/;
-/include/ "dbx5x0.dtsi"
-/include/ "href.dtsi"
-/include/ "stuib.dtsi"
+#include "dbx5x0.dtsi"
+#include "href.dtsi"
+#include "stuib.dtsi"
/ {
model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
};
};
- soc-u9500 {
+ soc {
prcmu@80157000 {
ab8500@5 {
ab8500-gpio {
};
i2c@80110000 {
- bu21013_tp@0x5c {
+ bu21013_tp@5c {
reset-gpio = <&tc3589x_gpio 13 0x4>;
};
};
*/
/dts-v1/;
-/include/ "dbx5x0.dtsi"
-/include/ "href.dtsi"
-/include/ "stuib.dtsi"
+#include "dbx5x0.dtsi"
+#include "href.dtsi"
+#include "stuib.dtsi"
/ {
model = "ST-Ericsson HREF (v60+) platform with Device Tree";
};
};
- soc-u9500 {
+ soc {
i2c@80110000 {
bu21013_tp@0x5c {
reset-gpio = <&gpio4 15 0x4>;
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <4>;
mmc-cap-sd-highspeed;
mmc-cap-mmc-highspeed;
// WLAN SDIO channel
sdi1_per2@80118000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <4>;
status = "okay";
// PoP:ed eMMC
sdi2_per3@80005000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
// On-board eMMC
sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
regulator-name = "V-MMC-SD";
};
- ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
regulator-name = "V-INTCORE";
};
regulator-name = "V-AMIC1";
};
- ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
regulator-name = "V-AMIC2";
};
};
cpus {
- cpu@0 {
- compatible = "arm,arm926ejs";
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
};
};
--- /dev/null
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-phytec-phycore-som.dts"
+
+/ {
+ model = "Phytec pcm970";
+ compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
+};
+
+&cspi1 {
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>;
+};
+
+&sdhci2 {
+ bus-width = <4>;
+ cd-gpios = <&gpio3 29 0>;
+ wp-gpios = <&gpio3 28 0>;
+ vmmc-supply = <&vmmc1_reg>;
+ status = "okay";
+};
+
+&uart1 {
+ fsl,uart-has-rtscts;
+};
+
+&uart2 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+ model = "Phytec pcm038";
+ compatible = "phytec,imx27-pcm038", "fsl,imx27";
+
+ memory {
+ reg = <0x0 0x0>;
+ };
+
+ soc {
+ aipi@10000000 { /* aipi1 */
+ serial@1000a000 {
+ status = "okay";
+ };
+
+ i2c@1001d000 {
+ clock-frequency = <400000>;
+ status = "okay";
+ at24@52 {
+ compatible = "at,24c32";
+ pagesize = <32>;
+ reg = <0x52>;
+ };
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ lm75@4a {
+ compatible = "national,lm75";
+ reg = <0x4a>;
+ };
+ };
+ };
+
+ aipi@10020000 { /* aipi2 */
+ ethernet@1002b000 {
+ phy-reset-gpios = <&gpio3 30 0>;
+ status = "okay";
+ };
+ };
+ };
+
+ nor_flash@c0000000 {
+ compatible = "cfi-flash";
+ bank-width = <2>;
+ reg = <0xc0000000 0x02000000>;
+ linux,mtd-name = "physmap-flash.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&cspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 28 0>;
+ status = "okay";
+
+ pmic: mc13783@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mc13783";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <23 0x4>;
+ fsl,mc13xxx-uses-adc;
+ fsl,mc13xxx-uses-rtc;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sw1b_reg: sw1b {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sw2a_reg: sw2a {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sw2b_reg: sw2b {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vaudio_reg: vaudio {
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ violo_reg: violo {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ viohi_reg: viohi {
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vgen_reg: vgen {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcam_reg: vcam {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vrf1_reg: vrf1 {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vrf2_reg: vrf2 {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vmmc1_reg: vmmc1 {
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ gpo1_reg: gpo1 { };
+
+ pwgt1spi_reg: pwgt1spi {
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&nfc {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ status = "okay";
+};
+++ /dev/null
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
- model = "Phytec pcm038";
- compatible = "phytec,imx27-pcm038", "fsl,imx27";
-
- memory {
- reg = <0x0 0x0>;
- };
-
- soc {
- aipi@10000000 { /* aipi1 */
- serial@1000a000 {
- fsl,uart-has-rtscts;
- status = "okay";
- };
-
- serial@1000b000 {
- fsl,uart-has-rtscts;
- status = "okay";
- };
-
- serial@1000c000 {
- fsl,uart-has-rtscts;
- status = "okay";
- };
-
- i2c@1001d000 {
- clock-frequency = <400000>;
- status = "okay";
- at24@52 {
- compatible = "at,24c32";
- pagesize = <32>;
- reg = <0x52>;
- };
- pcf8563@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
- lm75@4a {
- compatible = "national,lm75";
- reg = <0x4a>;
- };
- };
- };
-
- aipi@10020000 { /* aipi2 */
- ethernet@1002b000 {
- status = "okay";
- };
- };
- };
-
- nor_flash@c0000000 {
- compatible = "cfi-flash";
- bank-width = <2>;
- reg = <0xc0000000 0x02000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-};
-
-&nfc {
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
- status = "okay";
-};
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
+ spi0 = &cspi1;
+ spi1 = &cspi2;
+ spi2 = &cspi3;
};
avic: avic-interrupt-controller@e0000000 {
reg = <0x10000000 0x20000>;
ranges;
+ dma: dma@10001000 {
+ compatible = "fsl,imx27-dma";
+ reg = <0x10001000 0x1000>;
+ interrupts = <32>;
+ clocks = <&clks 50>, <&clks 70>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <1>;
+ #dma-channels = <16>;
+ };
+
wdog: wdog@10002000 {
compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
reg = <0x10002000 0x1000>;
clock-names = "ipg", "per";
};
+ pwm0: pwm@10006000 {
+ compatible = "fsl,imx27-pwm";
+ reg = <0x10006000 0x1000>;
+ interrupts = <23>;
+ clocks = <&clks 34>, <&clks 61>;
+ clock-names = "ipg", "per";
+ };
+
uart1: serial@1000a000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000a000 0x1000>;
status = "disabled";
};
+ sdhci1: sdhci@10013000 {
+ compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+ reg = <0x10013000 0x1000>;
+ interrupts = <11>;
+ clocks = <&clks 30>, <&clks 60>;
+ clock-names = "ipg", "per";
+ dmas = <&dma 7>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ sdhci2: sdhci@10014000 {
+ compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+ reg = <0x10014000 0x1000>;
+ interrupts = <10>;
+ clocks = <&clks 29>, <&clks 60>;
+ clock-names = "ipg", "per";
+ dmas = <&dma 6>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
gpio1: gpio@10015000 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015000 0x100>;
status = "disabled";
};
+ sdhci3: sdhci@1001e000 {
+ compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+ reg = <0x1001e000 0x1000>;
+ interrupts = <9>;
+ clocks = <&clks 28>, <&clks 60>;
+ clock-names = "ipg", "per";
+ dmas = <&dma 36>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
gpt6: timer@1001f000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x1001f000 0x1000>;
reg = <0x10020000 0x20000>;
ranges;
+ coda: coda@10023000 {
+ compatible = "fsl,imx27-vpu";
+ reg = <0x10023000 0x0200>;
+ interrupts = <53>;
+ clocks = <&clks 57>, <&clks 66>;
+ clock-names = "per", "ahb";
+ iram = <&iram>;
+ };
+
+ clks: ccm@10027000{
+ compatible = "fsl,imx27-ccm";
+ reg = <0x10027000 0x1000>;
+ #clock-cells = <1>;
+ };
+
fec: ethernet@1002b000 {
compatible = "fsl,imx27-fec";
reg = <0x1002b000 0x4000>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
-
- clks: ccm@10027000{
- compatible = "fsl,imx27-ccm";
- reg = <0x10027000 0x1000>;
- #clock-cells = <1>;
- };
};
+ iram: iram@ffff4c00 {
+ compatible = "mmio-sram";
+ reg = <0xffff4c00 0xb400>;
+ };
nfc: nand@d8000000 {
#address-cells = <1>;
#size-cells = <1>;
-
compatible = "fsl,imx27-nand";
reg = <0xd8000000 0x1000>;
interrupts = <29>;
apbx@80040000 {
lradc@80050000 {
+ fsl,lradc-touchscreen-wires = <4>;
status = "okay";
};
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ usb0_otg_cfa10036: otg-10036@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
};
ssp0: ssp@80010000 {
};
apbx@80040000 {
- pwm: pwm@80064000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm4_pins_a>;
- status = "okay";
- };
-
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_b>;
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_b>;
+ clock-frequency = <400000>;
status = "okay";
- ssd1307: oled@3c {
- compatible = "solomon,ssd1307fb-i2c";
+ ssd1306: oled@3c {
+ compatible = "solomon,ssd1306fb-i2c";
reg = <0x3c>;
- pwms = <&pwm 4 3000>;
reset-gpios = <&gpio2 7 0>;
+ solomon,height = <32>;
+ solomon,width = <128>;
+ solomon,page-offset = <0>;
};
};
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_otg_cfa10036>;
+ status = "okay";
};
};
0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
- 0x3173 /* MX28_PAD_LCD_RESET__GPIO_3_23 */
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
apbx@80040000 {
pwm: pwm@80064000 {
- pinctrl-names = "default", "default";
- pinctrl-1 = <&pwm3_pins_b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pins_b>;
status = "okay";
};
gpio-sck = <&gpio2 16 0>;
gpio-mosi = <&gpio2 17 0>;
gpio-miso = <&gpio2 18 0>;
- cs-gpios = <&gpio3 23 0>;
+ cs-gpios = <&gpio3 5 0>;
num-chipselects = <1>;
#address-cells = <1>;
#size-cells = <0>;
--- /dev/null
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+/include/ "imx28-cfa10037.dts"
+
+/ {
+ model = "Crystalfontz CFA-10055 Board";
+ compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+ apb@80000000 {
+ apbh@80000000 {
+ pinctrl@80018000 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&hog_pins_cfa10055
+ &hog_pins_cfa10055_pullup>;
+
+ hog_pins_cfa10055: hog-10055@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ hog_pins_cfa10055_pullup: hog-10055-pullup@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ spi2_pins_cfa10055: spi2-cfa10055@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
+ 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
+ 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+ 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+ 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+ 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+ 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+ 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+ 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+ 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+ 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+ 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+ 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+ 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+ 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+ 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+ 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+ 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+ 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+ 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_pins_cfa10055: lcdif-evk@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_18bit_pins_cfa10055
+ &lcdif_pins_cfa10055>;
+ display = <&display>;
+ status = "okay";
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <9216000>;
+ hactive = <320>;
+ vactive = <480>;
+ hback-porch = <2>;
+ hfront-porch = <2>;
+ vback-porch = <2>;
+ vfront-porch = <2>;
+ hsync-len = <15>;
+ vsync-len = <15>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+ };
+ };
+
+ apbx@80040000 {
+ lradc@80050000 {
+ fsl,lradc-touchscreen-wires = <4>;
+ status = "okay";
+ };
+
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pins_b>;
+ status = "okay";
+ };
+ };
+ };
+
+ spi2 {
+ compatible = "spi-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_cfa10055>;
+ status = "okay";
+ gpio-sck = <&gpio2 16 0>;
+ gpio-mosi = <&gpio2 17 0>;
+ gpio-miso = <&gpio2 18 0>;
+ cs-gpios = <&gpio3 5 0>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hx8357: hx8357@0 {
+ compatible = "himax,hx8357b", "himax,hx8357";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+ gpios-reset = <&gpio3 30 0>;
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 3 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+};
--- /dev/null
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+ model = "Crystalfontz CFA-10057 Board";
+ compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
+
+ apb@80000000 {
+ apbh@80000000 {
+ pinctrl@80018000 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&hog_pins_cfa10057
+ &hog_pins_cfa10057_pullup>;
+
+ hog_pins_cfa10057: hog-10057@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ hog_pins_cfa10057_pullup: hog-10057-pullup@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
+ 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
+ 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
+ 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+ 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+ 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+ 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+ 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+ 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+ 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+ 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+ 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+ 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+ 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+ 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+ 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+ 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+ 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+ 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+ 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+ 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_pins_cfa10057: lcdif-evk@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_18bit_pins_cfa10057
+ &lcdif_pins_cfa10057>;
+ display = <&display>;
+ status = "okay";
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <30000000>;
+ hactive = <480>;
+ vactive = <800>;
+ hfront-porch = <12>;
+ hback-porch = <2>;
+ vfront-porch = <5>;
+ vback-porch = <3>;
+ hsync-len = <2>;
+ vsync-len = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+ };
+ };
+
+ apbx@80040000 {
+ lradc@80050000 {
+ fsl,lradc-touchscreen-wires = <4>;
+ status = "okay";
+ };
+
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pins_b>;
+ status = "okay";
+ };
+
+ i2c1: i2c@8005a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
+
+ usbphy1: usbphy@8007e000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb1: usb@80090000 {
+ vbus-supply = <®_usb1_vbus>;
+ pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb1_vbus: usb1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 7 1>;
+ };
+ };
+
+ ahb@80080000 {
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-reset-gpios = <&gpio2 21 0>;
+ phy-reset-duration = <100>;
+ status = "okay";
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 3 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ };
+};
auart0: serial@8006a000 {
pinctrl-names = "default";
- pinctrl-0 = <&auart0_2pins_a>;
+ pinctrl-0 = <&auart0_pins_a>;
+ status = "okay";
+ };
+
+ auart1: serial@8006c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart1_pins_a>;
+ status = "okay";
+ };
+
+ auart2: serial@8006e000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart2_2pins_b>;
status = "okay";
};
};
};
cpus {
- cpu@0 {
- compatible = "arm,arm926ejs";
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
};
};
fsl,pull-up = <0>;
};
+ auart2_2pins_b: auart2-2pins@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
+ 0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
auart3_pins_a: auart3@0 {
reg = <0>;
fsl,pinmux-ids = <
fsl,pull-up = <0>;
};
+ auart3_2pins_b: auart3-2pins@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
+ 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart4_2pins_a: auart4@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */
+ 0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
mac0_pins_a: mac0@0 {
reg = <0>;
fsl,pinmux-ids = <
};
digctl@8001c000 {
- compatible = "fsl,imx28-digctl";
+ compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
reg = <0x8001c000 0x2000>;
interrupts = <89>;
status = "disabled";
status = "okay";
};
+&nfc {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
+
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_2>;
};
};
+ usbphy0: usbphy@0 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks 124>;
+ clock-names = "main_clk";
+ status = "okay";
+ };
+
usbotg: usb@73f80000 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80000 0x0200>;
interrupts = <18>;
+ clocks = <&clks 108>;
+ fsl,usbmisc = <&usbmisc 0>;
+ fsl,usbphy = <&usbphy0>;
status = "disabled";
};
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80200 0x0200>;
interrupts = <14>;
+ clocks = <&clks 108>;
+ fsl,usbmisc = <&usbmisc 1>;
status = "disabled";
};
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80400 0x0200>;
interrupts = <16>;
+ clocks = <&clks 108>;
+ fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
};
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80600 0x0200>;
interrupts = <17>;
+ clocks = <&clks 108>;
+ fsl,usbmisc = <&usbmisc 3>;
status = "disabled";
};
+ usbmisc: usbmisc@73f80800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx51-usbmisc";
+ reg = <0x73f80800 0x200>;
+ clocks = <&clks 108>;
+ };
+
gpio1: gpio@73f84000 {
compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
reg = <0x73f84000 0x4000>;
--- /dev/null
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+/ {
+ model = "DENX M53EVK";
+ compatible = "denx,imx53-m53evk", "fsl,imx53";
+
+ memory {
+ reg = <0x70000000 0x20000000>;
+ };
+
+ soc {
+ display@di1 {
+ compatible = "fsl,imx-parallel-display";
+ crtcs = <&ipu 1>;
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp2_1>;
+
+ display-timings {
+ 800x480p60 {
+ native-mode;
+ clock-frequency = <31500000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ vback-porch = <33>;
+ vfront-porch = <9>;
+ vsync-len = <3>;
+ vsync-active = <1>;
+ };
+ };
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 3000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pin_gpio>;
+
+ user1 {
+ label = "user1";
+ gpios = <&gpio2 8 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user2 {
+ label = "user2";
+ gpios = <&gpio2 9 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p2v: 3p2v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P2V";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx53-m53evk-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx53-m53evk-sgtl5000";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Ext Spk", "LINE_OUT";
+ mux-int-port = <2>;
+ mux-ext-port = <4>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_2>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_3>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2_1>;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
+ cd-gpios = <&gpio1 1 0>;
+ wp-gpios = <&gpio1 9 0>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_2>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p2v>;
+ VDDIO-supply = <®_3p2v>;
+ clocks = <&clks 150>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_2>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ stmpe610@41 {
+ compatible = "st,stmpe610";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ id = <0>;
+ blocks = <0x5>;
+ interrupts = <6 0x0>;
+ interrupt-parent = <&gpio7>;
+ irq-trigger = <0x1>;
+
+ stmpe_touchscreen {
+ compatible = "stmpe,ts";
+ reg = <0>;
+ ts,sample-time = <4>;
+ ts,mod-12b = <1>;
+ ts,ref-sel = <0>;
+ ts,adc-freq = <1>;
+ ts,ave-ctrl = <3>;
+ ts,touch-det-delay = <3>;
+ ts,settling = <4>;
+ ts,fraction-z = <7>;
+ ts,i-drive = <1>;
+ };
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ rtc: rtc@68 {
+ compatible = "stm,m41t62";
+ reg = <0x68>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_1>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
+ MX53_PAD_EIM_EB3__GPIO2_31 0x80000000
+ MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
+ MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5
+
+ >;
+ };
+
+ led_pin_gpio: led_gpio@0 {
+ fsl,pins = <
+ MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000
+ MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000
+ >;
+ };
+ };
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand_1>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1_1>;
+ status = "okay";
+};
+
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_2>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_1>;
+ status = "okay";
+};
/ {
model = "TQ MBa53 starter kit";
compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
+
+ reg_backlight: fixed@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-supply";
+ gpio = <&gpio2 5 0>;
+ startup-delay-us = <5000>;
+ enable-active-low;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 50000 0 0>;
+ brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
+ default-brightness-level = <10>;
+ enable-gpios = <&gpio7 7 0>;
+ power-supply = <®_backlight>;
+ };
+
+ disp1: display@disp1 {
+ compatible = "fsl,imx-parallel-display";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_disp1_1>;
+ crtcs = <&ipu 1>;
+ interface-pix-fmt = "rgb24";
+ status = "disabled";
+ };
+
+ reg_3p2v: 3p2v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P2V";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "tq,imx53-mba53-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx53-mba53-sgtl5000";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <2>;
+ mux-ext-port = <5>;
+ };
+};
+
+&ldb {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds1_1>;
+ status = "disabled";
};
&iomuxc {
lvds1 {
pinctrl_lvds1_1: lvds1-grp1 {
fsl,pins = <
- MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x10000
- MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x10000
- MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x10000
- MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x10000
- MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x10000
+ MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+ MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+ MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+ MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+ MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
>;
};
pinctrl_lvds1_2: lvds1-grp2 {
fsl,pins = <
- MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x10000
- MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x10000
- MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x10000
- MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x10000
- MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x10000
+ MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+ MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+ MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+ MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+ MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
>;
};
};
disp1 {
pinctrl_disp1_1: disp1-grp1 {
fsl,pins = <
- MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x10000 /* DISP1_DRDY */
- MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x10000 /* DISP1_HSYNC */
- MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x10000 /* DISP1_VSYNC */
- MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x10000
- MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x10000
- MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x10000
- MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x10000
- MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x10000
- MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x10000
- MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x10000
- MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x10000
- MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x10000
- MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x10000
- MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x10000
- MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x10000
- MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x10000
- MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x10000
- MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x10000
- MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x10000
- MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x10000
- MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x10000
- MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x10000
- MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x10000
- MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x10000
- MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x10000
- MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x10000
- MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x10000
+ MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
+ MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x80000000 /* DISP1_DRDY */
+ MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x80000000 /* DISP1_HSYNC */
+ MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x80000000 /* DISP1_VSYNC */
+ MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
+ MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
+ MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
+ MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
+ MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
+ MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
+ MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
+ MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
+ MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
+ MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
+ MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
+ MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
+ MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
+ MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
+ MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x80000000
+ MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x80000000
+ MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x80000000
+ MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x80000000
+ MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x80000000
+ MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x80000000
+ MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x80000000
+ MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x80000000
+ MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x80000000
+ MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x80000000
+ >;
+ };
+ };
+
+ tve {
+ pinctrl_vga_sync_1: vgasync-grp1 {
+ fsl,pins = <
+ /* VGA_VSYNC, HSYNC with max drive strength */
+ MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0xe6
+ MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0xe6
>;
};
};
status = "okay";
};
+&audmux {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
+};
+
&i2c2 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
+ clocks = <&clks 150>;
+ VDDA-supply = <®_3p2v>;
+ VDDIO-supply = <®_3p2v>;
};
expander: pca9554@20 {
compatible = "pca9554";
reg = <0x20>;
interrupts = <109>;
+ #gpio-cells = <2>;
+ gpio-controller;
};
sensor2: lm75@49 {
};
&fec {
+ phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
status = "okay";
};
+&usbotg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
&uart1 {
status = "okay";
};
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
&uart2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
+
+&tve {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vga_sync_1>;
+ ddc = <&i2c3>;
+ fsl,tve-mode = "vga";
+ fsl,hsync-pin = <4>;
+ fsl,vsync-pin = <6>;
+ status = "okay";
+};
reg = <0x70000000 0x40000000>;
};
+ display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ crtcs = <&ipu 0>;
+ interface-pix-fmt = "rgb565";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp0_1>;
+ status = "disabled";
+ display-timings {
+ claawvga {
+ native-mode;
+ clock-frequency = <27000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <40>;
+ hfront-porch = <60>;
+ vback-porch = <10>;
+ vfront-porch = <10>;
+ hsync-len = <20>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
reg = <0x0a>;
VDDA-supply = <®_3p2v>;
VDDIO-supply = <®_3p2v>;
+ clocks = <&clks 150>;
};
};
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
&esdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
+ pinctrl-0 = <&pinctrl_esdhc2_1>,
+ <&pinctrl_tqma53_esdhc2_2>;
+ vmmc-supply = <®_3p3v>;
wp-gpios = <&gpio1 2 0>;
cd-gpios = <&gpio1 4 0>;
status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
+ esdhc2_2 {
+ pinctrl_tqma53_esdhc2_2: esdhc2-tqma53-grp2 {
+ fsl,pins = <
+ MX53_PAD_GPIO_4__GPIO1_4 0x80000000 /* SD2_CD */
+ MX53_PAD_GPIO_2__GPIO1_2 0x80000000 /* SD2_WP */
+ >;
+ };
+ };
+
i2s {
pinctrl_i2s_1: i2s-grp1 {
fsl,pins = <
- MX53_PAD_GPIO_19__GPIO4_5 0x10000 /* I2S_MCLK */
- MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x10000 /* I2S_SCLK */
- MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x10000 /* I2S_DOUT */
- MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x10000 /* I2S_LRCLK */
- MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x10000 /* I2S_DIN */
+ MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 /* I2S_SCLK */
+ MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 /* I2S_DOUT */
+ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 /* I2S_LRCLK */
+ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 /* I2S_DIN */
>;
};
};
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0x10000 /* VSYNC */
- MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0x10000 /* HSYNC */
- MX53_PAD_PATA_DA_1__GPIO7_7 0x10000 /* LCD_BLT_EN */
- MX53_PAD_PATA_DA_2__GPIO7_8 0x10000 /* LCD_RESET */
- MX53_PAD_PATA_DATA5__GPIO2_5 0x10000 /* LCD_POWER */
- MX53_PAD_PATA_DATA6__GPIO2_6 0x10000 /* PMIC_INT */
- MX53_PAD_PATA_DATA14__GPIO2_14 0x10000 /* CSI_RST */
- MX53_PAD_PATA_DATA15__GPIO2_15 0x10000 /* CSI_PWDN */
- MX53_PAD_GPIO_0__GPIO1_0 0x10000 /* SYSTEM_DOWN */
- MX53_PAD_GPIO_3__GPIO1_3 0x10000
+ MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
+ MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 /* LCD_BLT_EN */
+ MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 /* LCD_RESET */
+ MX53_PAD_PATA_DATA5__GPIO2_5 0x80000000 /* LCD_POWER */
+ MX53_PAD_PATA_DATA6__GPIO2_6 0x80000000 /* PMIC_INT */
+ MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 /* CSI_RST */
+ MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 /* CSI_PWDN */
+ MX53_PAD_GPIO_19__GPIO4_5 0x80000000 /* #SYSTEM_DOWN */
+ MX53_PAD_GPIO_3__GPIO1_3 0x80000000
+ MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 /* #PHY_RESET */
+ MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 /* LCD_CONTRAST */
>;
};
};
reg = <0x8>;
fsl,mc13xxx-uses-rtc;
interrupt-parent = <&gpio2>;
- interrupts = <6 8>; /* PDATA_DATA6, low active */
+ interrupts = <6 4>; /* PATA_DATA6, active high */
};
sensor1: lm75@48 {
--- /dev/null
+/*
+ * Copyright 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Ka-Ro TX53";
+ compatible = "karo,tx53", "fsl,imx53";
+
+ memory {
+ reg = <0x70000000 0x40000000>; /* Up to 1GiB */
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_2>;
+ status = "disabled";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2_1>;
+ status = "disabled";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_2>;
+ status = "disabled";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_2>;
+ status = "disabled";
+};
+
+&esdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2_1>;
+ status = "disabled";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
+ phy-mode = "rmii";
+ status = "disabled";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_2>;
+ status = "disabled";
+};
+
+&owire {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_owire_1>;
+ status = "disabled";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2_1>;
+ status = "disabled";
+};
+
+&ssi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
+ status = "disabled";
+};
+
+&ssi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_2>;
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_2>,
+ <&pinctrl_uart1_3>;
+ fsl,uart-has-rtscts;
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_2>;
+ fsl,uart-has-rtscts;
+ status = "disabled";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_1>;
+ fsl,uart-has-rtscts;
+ status = "disabled";
+};
gpio4 = &gpio5;
gpio5 = &gpio6;
gpio6 = &gpio7;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
};
tzic: tz-interrupt-controller@0fffc000 {
};
};
+ usbphy0: usbphy@0 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks 124>;
+ clock-names = "main_clk";
+ status = "okay";
+ };
+
+ usbphy1: usbphy@1 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks 125>;
+ clock-names = "main_clk";
+ status = "okay";
+ };
+
usbotg: usb@53f80000 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80000 0x0200>;
interrupts = <18>;
+ clocks = <&clks 108>;
+ fsl,usbmisc = <&usbmisc 0>;
+ fsl,usbphy = <&usbphy0>;
status = "disabled";
};
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80200 0x0200>;
interrupts = <14>;
+ clocks = <&clks 108>;
+ fsl,usbmisc = <&usbmisc 1>;
+ fsl,usbphy = <&usbphy1>;
status = "disabled";
};
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80400 0x0200>;
interrupts = <16>;
+ clocks = <&clks 108>;
+ fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
};
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80600 0x0200>;
interrupts = <17>;
+ clocks = <&clks 108>;
+ fsl,usbmisc = <&usbmisc 3>;
status = "disabled";
};
+ usbmisc: usbmisc@53f80800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx53-usbmisc";
+ reg = <0x53f80800 0x200>;
+ clocks = <&clks 108>;
+ };
+
gpio1: gpio@53f84000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f84000 0x4000>;
MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
>;
};
+
+ pinctrl_audmux_2: audmuxgrp-2 {
+ fsl,pins = <
+ MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000
+ MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000
+ MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000
+ MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000
+ >;
+ };
+
+ pinctrl_audmux_3: audmuxgrp-3 {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000
+ MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000
+ MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000
+ MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000
+ >;
+ };
};
fec {
MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
>;
};
+
+ pinctrl_fec_2: fecgrp-2 {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ MX53_PAD_KEY_ROW1__FEC_COL 0x80000000
+ MX53_PAD_KEY_COL3__FEC_CRS 0x80000000
+ MX53_PAD_KEY_COL2__FEC_RDATA_2 0x80000000
+ MX53_PAD_KEY_COL0__FEC_RDATA_3 0x80000000
+ MX53_PAD_KEY_COL1__FEC_RX_CLK 0x80000000
+ MX53_PAD_KEY_ROW2__FEC_TDATA_2 0x80000000
+ MX53_PAD_GPIO_19__FEC_TDATA_3 0x80000000
+ MX53_PAD_KEY_ROW0__FEC_TX_ER 0x80000000
+ >;
+ };
};
csi {
MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5
>;
};
+
+ pinctrl_csi_2: csigrp-2 {
+ fsl,pins = <
+ MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1d5
+ MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1d5
+ MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5
+ MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1d5
+ MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1d5
+ MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1d5
+ MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1d5
+ MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1d5
+ MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1d5
+ MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1d5
+ MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1d5
+ >;
+ };
};
cspi {
MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5
>;
};
+
+ pinctrl_cspi_2: cspigrp-2 {
+ fsl,pins = <
+ MX53_PAD_EIM_D22__CSPI_MISO 0x1d5
+ MX53_PAD_EIM_D28__CSPI_MOSI 0x1d5
+ MX53_PAD_EIM_D21__CSPI_SCLK 0x1d5
+ >;
+ };
};
ecspi1 {
MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
>;
};
+
+ pinctrl_ecspi1_2: ecspi1grp-2 {
+ fsl,pins = <
+ MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000
+ MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000
+ MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
+ MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
+ MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
+ MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000
+ >;
+ };
+ };
+
+ ecspi2 {
+ pinctrl_ecspi2_1: ecspi2grp-1 {
+ fsl,pins = <
+ MX53_PAD_EIM_OE__ECSPI2_MISO 0x80000000
+ MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x80000000
+ MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x80000000
+ >;
+ };
};
esdhc1 {
MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000
>;
};
+
+ pinctrl_can1_3: can1grp-3 {
+ fsl,pins = <
+ MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000
+ MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000
+ >;
+ };
};
can2 {
MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
>;
};
+
+ pinctrl_i2c1_2: i2c1grp-2 {
+ fsl,pins = <
+ MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
+ MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
+ >;
+ };
};
i2c2 {
MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
>;
};
+
+ pinctrl_i2c2_2: i2c2grp-2 {
+ fsl,pins = <
+ MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000
+ MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000
+ >;
+ };
};
i2c3 {
};
};
+ ipu_disp0 {
+ pinctrl_ipu_disp0_1: ipudisp0grp-1 {
+ fsl,pins = <
+ MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
+ MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5
+ MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5
+ MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5
+ MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5
+ MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5
+ MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5
+ MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5
+ MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5
+ MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5
+ MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5
+ MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5
+ MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5
+ MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5
+ MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5
+ MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5
+ MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5
+ MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5
+ MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5
+ MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5
+ MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5
+ MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5
+ MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5
+ MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5
+ MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5
+ MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5
+ MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5
+ MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
+ >;
+ };
+ };
+
+ ipu_disp1 {
+ pinctrl_ipu_disp1_1: ipudisp1grp-1 {
+ fsl,pins = <
+ MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5
+ MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5
+ MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5
+ MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5
+ MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5
+ MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5
+ MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5
+ MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5
+ MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5
+ MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5
+ MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5
+ MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5
+ MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5
+ MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5
+ MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5
+ MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5
+ MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5
+ MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5
+ MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5
+ MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5
+ MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5
+ MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5
+ MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5
+ MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5
+ MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5
+ MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5
+ MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5
+ MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5
+ MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5
+ MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5
+ MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5
+ MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5
+ >;
+ };
+ };
+
+ ipu_disp2 {
+ pinctrl_ipu_disp2_1: ipudisp2grp-1 {
+ fsl,pins = <
+ MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+ MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+ MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+ MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+ MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+ MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+ MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+ MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+ MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+ MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+ >;
+ };
+ };
+
+ nand {
+ pinctrl_nand_1: nandgrp-1 {
+ fsl,pins = <
+ MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
+ MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
+ MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
+ MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
+ MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
+ MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
+ MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
+ MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
+ MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
+ MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
+ MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
+ MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
+ MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
+ MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
+ MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
+ >;
+ };
+ };
+
owire {
pinctrl_owire_1: owiregrp-1 {
fsl,pins = <
};
};
+ pwm1 {
+ pinctrl_pwm1_1: pwm1grp-1 {
+ fsl,pins = <
+ MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5
+ >;
+ };
+ };
+
+ pwm2 {
+ pinctrl_pwm2_1: pwm2grp-1 {
+ fsl,pins = <
+ MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000
+ >;
+ };
+ };
+
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5
>;
};
+
+ pinctrl_uart1_3: uart1grp-3 {
+ fsl,pins = <
+ MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5
+ MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5
+ >;
+ };
};
uart2 {
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
>;
};
+
+ pinctrl_uart2_2: uart2grp-2 {
+ fsl,pins = <
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
+ MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5
+ MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5
+ >;
+ };
};
uart3 {
>;
};
};
-
};
gpr: iomuxc-gpr@53fa8000 {
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
+
+ tve: tve@63ff0000 {
+ compatible = "fsl,imx53-tve";
+ reg = <0x63ff0000 0x1000>;
+ interrupts = <92>;
+ clocks = <&clks 69>, <&clks 116>;
+ clock-names = "tve", "di_sel";
+ crtcs = <&ipu 1>;
+ status = "disabled";
+ };
};
};
};
>;
};
};
+
+ ecspi1 {
+ pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
+ fsl,pins = <
+ MX6DL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+ >;
+ };
+ };
};
MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
+ MX6DL_PAD_GPIO_0__CCM_CLKO1 0x130b0
>;
};
};
cpu@0 {
compatible = "arm,cortex-a9";
+ device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
};
cpu@1 {
compatible = "arm,cortex-a9";
+ device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
};
compatible = "fsl,imx6dl-iomuxc";
reg = <0x020e0000 0x4000>;
+ audmux {
+ pinctrl_audmux_2: audmux-2 {
+ fsl,pins = <
+ MX6DL_PAD_CSI0_DAT7__AUD3_RXD 0x80000000
+ MX6DL_PAD_CSI0_DAT4__AUD3_TXC 0x80000000
+ MX6DL_PAD_CSI0_DAT5__AUD3_TXD 0x80000000
+ MX6DL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
+ >;
+ };
+ };
+
+ ecspi1 {
+ pinctrl_ecspi1_1: ecspi1grp-1 {
+ fsl,pins = <
+ MX6DL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6DL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6DL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ >;
+ };
+ };
+
enet {
pinctrl_enet_1: enetgrp-1 {
fsl,pins = <
};
};
+ gpmi-nand {
+ pinctrl_gpmi_nand_1: gpmi-nand-1 {
+ fsl,pins = <
+ MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ MX6DL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+ >;
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_2: i2c1grp-2 {
+ fsl,pins = <
+ MX6DL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6DL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+ };
+
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
};
};
+ weim {
+ pinctrl_weim_cs0_1: weim_cs0grp-1 {
+ fsl,pins = <
+ MX6DL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
+ >;
+ };
+
+ pinctrl_weim_nor_1: weim_norgrp-1 {
+ fsl,pins = <
+ MX6DL_PAD_EIM_OE__EIM_OE_B 0xb0b1
+ MX6DL_PAD_EIM_RW__EIM_RW 0xb0b1
+ MX6DL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
+ /* data */
+ MX6DL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
+ MX6DL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
+ MX6DL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
+ MX6DL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
+ MX6DL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
+ MX6DL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
+ MX6DL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
+ MX6DL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
+ MX6DL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
+ MX6DL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
+ MX6DL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
+ MX6DL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
+ MX6DL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
+ MX6DL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
+ MX6DL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
+ MX6DL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
+ /* address */
+ MX6DL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
+ MX6DL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
+ MX6DL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
+ MX6DL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
+ MX6DL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
+ MX6DL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
+ MX6DL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
+ MX6DL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
+ MX6DL_PAD_EIM_DA15__EIM_AD15 0xb0b1
+ MX6DL_PAD_EIM_DA14__EIM_AD14 0xb0b1
+ MX6DL_PAD_EIM_DA13__EIM_AD13 0xb0b1
+ MX6DL_PAD_EIM_DA12__EIM_AD12 0xb0b1
+ MX6DL_PAD_EIM_DA11__EIM_AD11 0xb0b1
+ MX6DL_PAD_EIM_DA10__EIM_AD10 0xb0b1
+ MX6DL_PAD_EIM_DA9__EIM_AD09 0xb0b1
+ MX6DL_PAD_EIM_DA8__EIM_AD08 0xb0b1
+ MX6DL_PAD_EIM_DA7__EIM_AD07 0xb0b1
+ MX6DL_PAD_EIM_DA6__EIM_AD06 0xb0b1
+ MX6DL_PAD_EIM_DA5__EIM_AD05 0xb0b1
+ MX6DL_PAD_EIM_DA4__EIM_AD04 0xb0b1
+ MX6DL_PAD_EIM_DA3__EIM_AD03 0xb0b1
+ MX6DL_PAD_EIM_DA2__EIM_AD02 0xb0b1
+ MX6DL_PAD_EIM_DA1__EIM_AD01 0xb0b1
+ MX6DL_PAD_EIM_DA0__EIM_AD00 0xb0b1
+ >;
+ };
+
+ };
};
--- /dev/null
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q-phytec-pfla02.dtsi"
+
+/ {
+ model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board";
+ compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q";
+};
+
+&fec {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usdhc2 {
+ status = "okay";
+};
+
+&usdhc3 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx6q.dtsi"
+
+/ {
+ model = "Phytec phyFLEX-i.MX6 Ouad";
+ compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6Q_PAD_EIM_D23__GPIO3_IO23 0x80000000
+ >;
+ };
+ };
+
+ pfla02 {
+ pinctrl_usdhc3_pfla02: usdhc3grp-pfla02 {
+ fsl,pins = <
+ MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
+ MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+ >;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_3>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 23 0>;
+ status = "disabled";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_1>;
+ status = "disabled";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_2>;
+ cd-gpios = <&gpio1 4 0>;
+ wp-gpios = <&gpio1 2 0>;
+ status = "disabled";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_2
+ &pinctrl_usdhc3_pfla02>;
+ cd-gpios = <&gpio1 27 0>;
+ wp-gpios = <&gpio1 29 0>;
+ status = "disabled";
+};
>;
};
};
+
+ ecspi1 {
+ pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
+ fsl,pins = <
+ MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000
+ >;
+ };
+ };
};
MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x80000000
MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x80000000
MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x80000000
+ MX6Q_PAD_GPIO_0__CCM_CLKO1 0x130b0
>;
};
};
cpu@0 {
compatible = "arm,cortex-a9";
+ device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
operating-points = <
cpu@1 {
compatible = "arm,cortex-a9";
+ device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
};
cpu@2 {
compatible = "arm,cortex-a9";
+ device_type = "cpu";
reg = <2>;
next-level-cache = <&L2>;
};
cpu@3 {
compatible = "arm,cortex-a9";
+ device_type = "cpu";
reg = <3>;
next-level-cache = <&L2>;
};
MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
>;
};
+
+ pinctrl_enet_3: enetgrp-3 {
+ fsl,pins = <
+ MX6Q_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6Q_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6Q_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ >;
+ };
};
gpmi-nand {
MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
- MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
- MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1
MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1
MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1
MX6Q_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
>;
};
+
+ pinctrl_i2c1_2: i2c1grp-2 {
+ fsl,pins = <
+ MX6Q_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6Q_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
};
i2c2 {
MX6Q_PAD_NANDF_D7__SD2_DATA7 0x17059
>;
};
+
+ pinctrl_usdhc2_2: usdhc2grp-2 {
+ fsl,pins = <
+ MX6Q_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6Q_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
};
usdhc3 {
>;
};
};
+
+ weim {
+ pinctrl_weim_cs0_1: weim_cs0grp-1 {
+ fsl,pins = <
+ MX6Q_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
+ >;
+ };
+
+ pinctrl_weim_nor_1: weimnorgrp-1 {
+ fsl,pins = <
+ MX6Q_PAD_EIM_OE__EIM_OE_B 0xb0b1
+ MX6Q_PAD_EIM_RW__EIM_RW 0xb0b1
+ MX6Q_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
+ /* data */
+ MX6Q_PAD_EIM_D16__EIM_DATA16 0x1b0b0
+ MX6Q_PAD_EIM_D17__EIM_DATA17 0x1b0b0
+ MX6Q_PAD_EIM_D18__EIM_DATA18 0x1b0b0
+ MX6Q_PAD_EIM_D19__EIM_DATA19 0x1b0b0
+ MX6Q_PAD_EIM_D20__EIM_DATA20 0x1b0b0
+ MX6Q_PAD_EIM_D21__EIM_DATA21 0x1b0b0
+ MX6Q_PAD_EIM_D22__EIM_DATA22 0x1b0b0
+ MX6Q_PAD_EIM_D23__EIM_DATA23 0x1b0b0
+ MX6Q_PAD_EIM_D24__EIM_DATA24 0x1b0b0
+ MX6Q_PAD_EIM_D25__EIM_DATA25 0x1b0b0
+ MX6Q_PAD_EIM_D26__EIM_DATA26 0x1b0b0
+ MX6Q_PAD_EIM_D27__EIM_DATA27 0x1b0b0
+ MX6Q_PAD_EIM_D28__EIM_DATA28 0x1b0b0
+ MX6Q_PAD_EIM_D29__EIM_DATA29 0x1b0b0
+ MX6Q_PAD_EIM_D30__EIM_DATA30 0x1b0b0
+ MX6Q_PAD_EIM_D31__EIM_DATA31 0x1b0b0
+ /* address */
+ MX6Q_PAD_EIM_A23__EIM_ADDR23 0xb0b1
+ MX6Q_PAD_EIM_A22__EIM_ADDR22 0xb0b1
+ MX6Q_PAD_EIM_A21__EIM_ADDR21 0xb0b1
+ MX6Q_PAD_EIM_A20__EIM_ADDR20 0xb0b1
+ MX6Q_PAD_EIM_A19__EIM_ADDR19 0xb0b1
+ MX6Q_PAD_EIM_A18__EIM_ADDR18 0xb0b1
+ MX6Q_PAD_EIM_A17__EIM_ADDR17 0xb0b1
+ MX6Q_PAD_EIM_A16__EIM_ADDR16 0xb0b1
+ MX6Q_PAD_EIM_DA15__EIM_AD15 0xb0b1
+ MX6Q_PAD_EIM_DA14__EIM_AD14 0xb0b1
+ MX6Q_PAD_EIM_DA13__EIM_AD13 0xb0b1
+ MX6Q_PAD_EIM_DA12__EIM_AD12 0xb0b1
+ MX6Q_PAD_EIM_DA11__EIM_AD11 0xb0b1
+ MX6Q_PAD_EIM_DA10__EIM_AD10 0xb0b1
+ MX6Q_PAD_EIM_DA9__EIM_AD09 0xb0b1
+ MX6Q_PAD_EIM_DA8__EIM_AD08 0xb0b1
+ MX6Q_PAD_EIM_DA7__EIM_AD07 0xb0b1
+ MX6Q_PAD_EIM_DA6__EIM_AD06 0xb0b1
+ MX6Q_PAD_EIM_DA5__EIM_AD05 0xb0b1
+ MX6Q_PAD_EIM_DA4__EIM_AD04 0xb0b1
+ MX6Q_PAD_EIM_DA3__EIM_AD03 0xb0b1
+ MX6Q_PAD_EIM_DA2__EIM_AD02 0xb0b1
+ MX6Q_PAD_EIM_DA1__EIM_AD01 0xb0b1
+ MX6Q_PAD_EIM_DA0__EIM_AD00 0xb0b1
+ >;
+ };
+
+ };
};
};
};
};
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1 &pinctrl_ecspi1_sabreauto>;
+ status = "disabled"; /* pin conflict with WEIM NOR */
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p32";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_2>;
status = "okay";
};
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand_1>;
+ status = "okay";
+};
+
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4_1>;
wp-gpios = <&gpio1 13 0>;
status = "okay";
};
+
+&weim {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_weim_nor_1 &pinctrl_weim_cs0_1>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x08000000 0x08000000>;
+ status = "disabled"; /* pin conflict with SPI NOR */
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+ 0x0000c000 0x1404a38e 0x00000000>;
+ };
+};
gpio = <&gpio3 22 0>;
enable-active-high;
};
+
+ reg_audio: wm8962_supply {
+ compatible = "regulator-fixed";
+ regulator-name = "wm8962-supply";
+ gpio = <&gpio4 10 0>;
+ enable-active-high;
+ };
};
gpio-keys {
linux,code = <114>; /* KEY_VOLUMEDOWN */
};
};
+
+ sound {
+ compatible = "fsl,imx6q-sabresd-wm8962",
+ "fsl,imx-audio-wm8962";
+ model = "wm8962-audio";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "MICBIAS", "AMIC",
+ "IN3R", "MICBIAS",
+ "DMIC", "MICBIAS",
+ "DMICDAT", "DMIC";
+ mux-int-port = <2>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_2>;
+ status = "okay";
};
&fec {
status = "okay";
};
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_2>;
+ status = "okay";
+
+ codec: wm8962@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clks 169>;
+ DCVDD-supply = <®_audio>;
+ DBVDD-supply = <®_audio>;
+ AVDD-supply = <®_audio>;
+ CPVDD-supply = <®_audio>;
+ MICVDD-supply = <®_audio>;
+ PLLVDD-supply = <®_audio>;
+ SPKVDD1-supply = <®_audio>;
+ SPKVDD2-supply = <®_audio>;
+ gpio-cfg = <
+ 0x0000 /* 0:Default */
+ 0x0000 /* 1:Default */
+ 0x0013 /* 2:FN_DMICCLK */
+ 0x0000 /* 3:Default */
+ 0x8014 /* 4:FN_DMICCDAT */
+ 0x0000 /* 5:Default */
+ >;
+ };
+};
+
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_1>;
interrupts = <0 92 0x04>;
cache-unified;
cache-level = <2>;
+ arm,tag-latency = <4 2 3>;
+ arm,data-latency = <4 2 3>;
};
pmu {
status = "disabled";
};
- usbmisc: usbmisc: usbmisc@02184800 {
+ usbmisc: usbmisc@02184800 {
#index-cells = <1>;
compatible = "fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
reg = <0x021b4000 0x4000>;
};
- weim@021b8000 {
+ weim: weim@021b8000 {
+ compatible = "fsl,imx6q-weim";
reg = <0x021b8000 0x4000>;
interrupts = <0 14 0x04>;
+ clocks = <&clks 196>;
};
ocotp@021bc000 {
reg = <0x021bc000 0x4000>;
};
- ocotp@021c0000 {
- reg = <0x021c0000 0x4000>;
- interrupts = <0 21 0x04>;
- };
-
tzasc@021d0000 { /* TZASC1 */
reg = <0x021d0000 0x4000>;
interrupts = <0 108 0x04>;
--- /dev/null
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "imx6sl.dtsi"
+
+/ {
+ model = "Freescale i.MX6 SoloLite EVK Board";
+ compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
+ MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059
+ MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059
+ MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059
+ MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+ >;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1_1>;
+ bus-width = <8>;
+ cd-gpios = <&gpio4 7 0>;
+ wp-gpios = <&gpio4 6 0>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_1>;
+ cd-gpios = <&gpio5 0 0>;
+ wp-gpios = <&gpio4 29 0>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_1>;
+ cd-gpios = <&gpio3 22 0>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include "skeleton.dtsi"
+#include "imx6sl-pinfunc.h"
+#include <dt-bindings/clock/imx6sl-clock.h>
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ intc: interrupt-controller@00a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ osc {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ L2: l2-cache@00a02000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00a02000 0x1000>;
+ interrupts = <0 92 0x04>;
+ cache-unified;
+ cache-level = <2>;
+ arm,tag-latency = <4 2 3>;
+ arm,data-latency = <4 2 3>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 94 0x04>;
+ };
+
+ aips1: aips-bus@02000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x100000>;
+ ranges;
+
+ spba: spba-bus@02000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x40000>;
+ ranges;
+
+ spdif: spdif@02004000 {
+ reg = <0x02004000 0x4000>;
+ interrupts = <0 52 0x04>;
+ };
+
+ ecspi1: ecspi@02008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02008000 0x4000>;
+ interrupts = <0 31 0x04>;
+ clocks = <&clks IMX6SL_CLK_ECSPI1>,
+ <&clks IMX6SL_CLK_ECSPI1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi2: ecspi@0200c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0200c000 0x4000>;
+ interrupts = <0 32 0x04>;
+ clocks = <&clks IMX6SL_CLK_ECSPI2>,
+ <&clks IMX6SL_CLK_ECSPI2>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi3: ecspi@02010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02010000 0x4000>;
+ interrupts = <0 33 0x04>;
+ clocks = <&clks IMX6SL_CLK_ECSPI3>,
+ <&clks IMX6SL_CLK_ECSPI3>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi4: ecspi@02014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02014000 0x4000>;
+ interrupts = <0 34 0x04>;
+ clocks = <&clks IMX6SL_CLK_ECSPI4>,
+ <&clks IMX6SL_CLK_ECSPI4>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart5: serial@02018000 {
+ compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+ reg = <0x02018000 0x4000>;
+ interrupts = <0 30 0x04>;
+ clocks = <&clks IMX6SL_CLK_UART>,
+ <&clks IMX6SL_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart1: serial@02020000 {
+ compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <0 26 0x04>;
+ clocks = <&clks IMX6SL_CLK_UART>,
+ <&clks IMX6SL_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@02024000 {
+ compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+ reg = <0x02024000 0x4000>;
+ interrupts = <0 27 0x04>;
+ clocks = <&clks IMX6SL_CLK_UART>,
+ <&clks IMX6SL_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ssi1: ssi@02028000 {
+ compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
+ reg = <0x02028000 0x4000>;
+ interrupts = <0 46 0x04>;
+ clocks = <&clks IMX6SL_CLK_SSI1>;
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ ssi2: ssi@0202c000 {
+ compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
+ reg = <0x0202c000 0x4000>;
+ interrupts = <0 47 0x04>;
+ clocks = <&clks IMX6SL_CLK_SSI2>;
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ ssi3: ssi@02030000 {
+ compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
+ reg = <0x02030000 0x4000>;
+ interrupts = <0 48 0x04>;
+ clocks = <&clks IMX6SL_CLK_SSI3>;
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ uart3: serial@02034000 {
+ compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+ reg = <0x02034000 0x4000>;
+ interrupts = <0 28 0x04>;
+ clocks = <&clks IMX6SL_CLK_UART>,
+ <&clks IMX6SL_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart4: serial@02038000 {
+ compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+ reg = <0x02038000 0x4000>;
+ interrupts = <0 29 0x04>;
+ clocks = <&clks IMX6SL_CLK_UART>,
+ <&clks IMX6SL_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+ };
+
+ pwm1: pwm@02080000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+ reg = <0x02080000 0x4000>;
+ interrupts = <0 83 0x04>;
+ clocks = <&clks IMX6SL_CLK_PWM1>,
+ <&clks IMX6SL_CLK_PWM1>;
+ clock-names = "ipg", "per";
+ };
+
+ pwm2: pwm@02084000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+ reg = <0x02084000 0x4000>;
+ interrupts = <0 84 0x04>;
+ clocks = <&clks IMX6SL_CLK_PWM2>,
+ <&clks IMX6SL_CLK_PWM2>;
+ clock-names = "ipg", "per";
+ };
+
+ pwm3: pwm@02088000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+ reg = <0x02088000 0x4000>;
+ interrupts = <0 85 0x04>;
+ clocks = <&clks IMX6SL_CLK_PWM3>,
+ <&clks IMX6SL_CLK_PWM3>;
+ clock-names = "ipg", "per";
+ };
+
+ pwm4: pwm@0208c000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+ reg = <0x0208c000 0x4000>;
+ interrupts = <0 86 0x04>;
+ clocks = <&clks IMX6SL_CLK_PWM4>,
+ <&clks IMX6SL_CLK_PWM4>;
+ clock-names = "ipg", "per";
+ };
+
+ gpt: gpt@02098000 {
+ compatible = "fsl,imx6sl-gpt";
+ reg = <0x02098000 0x4000>;
+ interrupts = <0 55 0x04>;
+ clocks = <&clks IMX6SL_CLK_GPT>,
+ <&clks IMX6SL_CLK_GPT_SERIAL>;
+ clock-names = "ipg", "per";
+ };
+
+ gpio1: gpio@0209c000 {
+ compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+ reg = <0x0209c000 0x4000>;
+ interrupts = <0 66 0x04 0 67 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@020a0000 {
+ compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+ reg = <0x020a0000 0x4000>;
+ interrupts = <0 68 0x04 0 69 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@020a4000 {
+ compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+ reg = <0x020a4000 0x4000>;
+ interrupts = <0 70 0x04 0 71 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@020a8000 {
+ compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+ reg = <0x020a8000 0x4000>;
+ interrupts = <0 72 0x04 0 73 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@020ac000 {
+ compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+ reg = <0x020ac000 0x4000>;
+ interrupts = <0 74 0x04 0 75 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ kpp: kpp@020b8000 {
+ reg = <0x020b8000 0x4000>;
+ interrupts = <0 82 0x04>;
+ };
+
+ wdog1: wdog@020bc000 {
+ compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <0 80 0x04>;
+ clocks = <&clks IMX6SL_CLK_DUMMY>;
+ };
+
+ wdog2: wdog@020c0000 {
+ compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
+ reg = <0x020c0000 0x4000>;
+ interrupts = <0 81 0x04>;
+ clocks = <&clks IMX6SL_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ clks: ccm@020c4000 {
+ compatible = "fsl,imx6sl-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 0x04 0 88 0x04>;
+ #clock-cells = <1>;
+ };
+
+ anatop: anatop@020c8000 {
+ compatible = "fsl,imx6sl-anatop", "syscon", "simple-bus";
+ reg = <0x020c8000 0x1000>;
+ interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+
+ regulator-1p1@110 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd1p1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x110>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <4>;
+ anatop-min-voltage = <800000>;
+ anatop-max-voltage = <1375000>;
+ };
+
+ regulator-3p0@120 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x120>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2625000>;
+ anatop-max-voltage = <3400000>;
+ };
+
+ regulator-2p5@130 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd2p5";
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x130>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2100000>;
+ anatop-max-voltage = <2850000>;
+ };
+
+ reg_arm: regulator-vddcore@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "cpu";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <0>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <24>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ reg_pu: regulator-vddpu@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddpu";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <9>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <26>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ reg_soc: regulator-vddsoc@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <18>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <28>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+ };
+
+ usbphy1: usbphy@020c9000 {
+ compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020c9000 0x1000>;
+ interrupts = <0 44 0x04>;
+ clocks = <&clks IMX6SL_CLK_USBPHY1>;
+ };
+
+ usbphy2: usbphy@020ca000 {
+ compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020ca000 0x1000>;
+ interrupts = <0 45 0x04>;
+ clocks = <&clks IMX6SL_CLK_USBPHY2>;
+ };
+
+ snvs@020cc000 {
+ compatible = "fsl,sec-v4.0-mon", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x020cc000 0x4000>;
+
+ snvs-rtc-lp@34 {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ reg = <0x34 0x58>;
+ interrupts = <0 19 0x04 0 20 0x04>;
+ };
+ };
+
+ epit1: epit@020d0000 {
+ reg = <0x020d0000 0x4000>;
+ interrupts = <0 56 0x04>;
+ };
+
+ epit2: epit@020d4000 {
+ reg = <0x020d4000 0x4000>;
+ interrupts = <0 57 0x04>;
+ };
+
+ src: src@020d8000 {
+ compatible = "fsl,imx6sl-src", "fsl,imx51-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <0 91 0x04 0 96 0x04>;
+ #reset-cells = <1>;
+ };
+
+ gpc: gpc@020dc000 {
+ compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <0 89 0x04>;
+ };
+
+ iomuxc: iomuxc@020e0000 {
+ compatible = "fsl,imx6sl-iomuxc";
+ reg = <0x020e0000 0x4000>;
+
+ fec {
+ pinctrl_fec_1: fecgrp-1 {
+ fsl,pins = <
+ MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0
+ MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0
+ MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0
+ MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0
+ MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0
+ MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0
+ MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0
+ MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0
+ MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+ MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+ >;
+ };
+ };
+
+ usdhc1 {
+ pinctrl_usdhc1_1: usdhc1grp-1 {
+ fsl,pins = <
+ MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059
+ MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059
+ MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059
+ MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
+ >;
+ };
+ };
+
+ usdhc2 {
+ pinctrl_usdhc2_1: usdhc2grp-1 {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+ };
+
+ usdhc3 {
+ pinctrl_usdhc3_1: usdhc3grp-1 {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+ };
+ };
+
+ csi: csi@020e4000 {
+ reg = <0x020e4000 0x4000>;
+ interrupts = <0 7 0x04>;
+ };
+
+ spdc: spdc@020e8000 {
+ reg = <0x020e8000 0x4000>;
+ interrupts = <0 6 0x04>;
+ };
+
+ sdma: sdma@020ec000 {
+ compatible = "fsl,imx6sl-sdma", "fsl,imx35-sdma";
+ reg = <0x020ec000 0x4000>;
+ interrupts = <0 2 0x04>;
+ clocks = <&clks IMX6SL_CLK_SDMA>,
+ <&clks IMX6SL_CLK_SDMA>;
+ clock-names = "ipg", "ahb";
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sl.bin";
+ };
+
+ pxp: pxp@020f0000 {
+ reg = <0x020f0000 0x4000>;
+ interrupts = <0 98 0x04>;
+ };
+
+ epdc: epdc@020f4000 {
+ reg = <0x020f4000 0x4000>;
+ interrupts = <0 97 0x04>;
+ };
+
+ lcdif: lcdif@020f8000 {
+ reg = <0x020f8000 0x4000>;
+ interrupts = <0 39 0x04>;
+ };
+
+ dcp: dcp@020fc000 {
+ reg = <0x020fc000 0x4000>;
+ interrupts = <0 99 0x04>;
+ };
+ };
+
+ aips2: aips-bus@02100000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02100000 0x100000>;
+ ranges;
+
+ usbotg1: usb@02184000 {
+ compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+ reg = <0x02184000 0x200>;
+ interrupts = <0 43 0x04>;
+ clocks = <&clks IMX6SL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc 0>;
+ status = "disabled";
+ };
+
+ usbotg2: usb@02184200 {
+ compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+ reg = <0x02184200 0x200>;
+ interrupts = <0 40 0x04>;
+ clocks = <&clks IMX6SL_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy2>;
+ fsl,usbmisc = <&usbmisc 1>;
+ status = "disabled";
+ };
+
+ usbh: usb@02184400 {
+ compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+ reg = <0x02184400 0x200>;
+ interrupts = <0 42 0x04>;
+ clocks = <&clks IMX6SL_CLK_USBOH3>;
+ fsl,usbmisc = <&usbmisc 2>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@02184800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x02184800 0x200>;
+ clocks = <&clks IMX6SL_CLK_USBOH3>;
+ };
+
+ fec: ethernet@02188000 {
+ compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
+ reg = <0x02188000 0x4000>;
+ interrupts = <0 114 0x04>;
+ clocks = <&clks IMX6SL_CLK_ENET_REF>,
+ <&clks IMX6SL_CLK_ENET_REF>;
+ clock-names = "ipg", "ahb";
+ status = "disabled";
+ };
+
+ usdhc1: usdhc@02190000 {
+ compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+ reg = <0x02190000 0x4000>;
+ interrupts = <0 22 0x04>;
+ clocks = <&clks IMX6SL_CLK_USDHC1>,
+ <&clks IMX6SL_CLK_USDHC1>,
+ <&clks IMX6SL_CLK_USDHC1>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc2: usdhc@02194000 {
+ compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+ reg = <0x02194000 0x4000>;
+ interrupts = <0 23 0x04>;
+ clocks = <&clks IMX6SL_CLK_USDHC2>,
+ <&clks IMX6SL_CLK_USDHC2>,
+ <&clks IMX6SL_CLK_USDHC2>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc3: usdhc@02198000 {
+ compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <0 24 0x04>;
+ clocks = <&clks IMX6SL_CLK_USDHC3>,
+ <&clks IMX6SL_CLK_USDHC3>,
+ <&clks IMX6SL_CLK_USDHC3>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc4: usdhc@0219c000 {
+ compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+ reg = <0x0219c000 0x4000>;
+ interrupts = <0 25 0x04>;
+ clocks = <&clks IMX6SL_CLK_USDHC4>,
+ <&clks IMX6SL_CLK_USDHC4>,
+ <&clks IMX6SL_CLK_USDHC4>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@021a0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+ reg = <0x021a0000 0x4000>;
+ interrupts = <0 36 0x04>;
+ clocks = <&clks IMX6SL_CLK_I2C1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@021a4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+ reg = <0x021a4000 0x4000>;
+ interrupts = <0 37 0x04>;
+ clocks = <&clks IMX6SL_CLK_I2C2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@021a8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+ reg = <0x021a8000 0x4000>;
+ interrupts = <0 38 0x04>;
+ clocks = <&clks IMX6SL_CLK_I2C3>;
+ status = "disabled";
+ };
+
+ mmdc: mmdc@021b0000 {
+ compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ };
+
+ rngb: rngb@021b4000 {
+ reg = <0x021b4000 0x4000>;
+ interrupts = <0 5 0x04>;
+ };
+
+ weim: weim@021b8000 {
+ reg = <0x021b8000 0x4000>;
+ interrupts = <0 14 0x04>;
+ };
+
+ ocotp: ocotp@021bc000 {
+ compatible = "fsl,imx6sl-ocotp";
+ reg = <0x021bc000 0x4000>;
+ };
+
+ audmux: audmux@021d8000 {
+ compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux";
+ reg = <0x021d8000 0x4000>;
+ status = "disabled";
+ };
+ };
+ };
+};
status = "disabled";
};
};
+
+ rtc@10300 {
+ compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+ reg = <0x10300 0x20>;
+ interrupts = <53>;
+ clocks = <&gate_clk 7>;
+ };
+
+ sata@80000 {
+ compatible = "marvell,orion-sata";
+ reg = <0x80000 0x5000>;
+ interrupts = <21>;
+ clocks = <&gate_clk 14>, <&gate_clk 15>;
+ clock-names = "0", "1";
+ status = "disabled";
+ };
+
+ mvsdio@90000 {
+ compatible = "marvell,orion-sdio";
+ reg = <0x90000 0x200>;
+ interrupts = <28>;
+ clocks = <&gate_clk 4>;
+ bus-width = <4>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ status = "disabled";
+ };
};
};
};
};
+ rtc@10300 {
+ compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+ reg = <0x10300 0x20>;
+ interrupts = <53>;
+ clocks = <&gate_clk 7>;
+ };
+
+ sata@80000 {
+ compatible = "marvell,orion-sata";
+ reg = <0x80000 0x5000>;
+ interrupts = <21>;
+ clocks = <&gate_clk 14>, <&gate_clk 15>;
+ clock-names = "0", "1";
+ status = "disabled";
+ };
+
+ mvsdio@90000 {
+ compatible = "marvell,orion-sdio";
+ reg = <0x90000 0x200>;
+ interrupts = <28>;
+ clocks = <&gate_clk 4>;
+ bus-width = <4>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ status = "disabled";
+ };
+
thermal@10078 {
compatible = "marvell,kirkwood-thermal";
reg = <0x10078 0x4>;
ocp@f1000000 {
pinctrl: pinctrl@10000 {
- pinctrl-0 = < &pmx_spi &pmx_uart0
- &pmx_cloudbox_sata0 >;
- pinctrl-names = "default";
-
pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
marvell,pins = "mpp15";
marvell,function = "sata0";
};
serial@12000 {
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
clock-frequency = <166666667>;
status = "okay";
};
sata@80000 {
+ pinctrl-0 = <&pmx_cloudbox_sata0>;
+ pinctrl-names = "default";
status = "okay";
nr-ports = <1>;
};
spi@10600 {
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
status = "okay";
flash@0 {
gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_320
+ &pmx_led_red_left_hdd &pmx_led_red_right_hdd
+ &pmx_led_white_usb>;
+ pinctrl-names = "default";
+
blue-power {
label = "dns320:blue:power";
gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
};
serial@12100 {
+ pinctrl-0 = <&pmx_uart1>;
+ pinctrl-names = "default";
status = "okay";
};
};
gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325
+ &pmx_led_red_left_hdd &pmx_led_red_right_hdd
+ &pmx_led_white_usb>;
+ pinctrl-names = "default";
+
white-power {
label = "dns325:white:power";
gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = <&pmx_button_power &pmx_button_unmount
+ &pmx_button_reset>;
+ pinctrl-names = "default";
+
button@1 {
label = "Power button";
linux,code = <116>;
gpio_fan {
/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
+ pinctrl-names = "default";
gpios = <&gpio1 14 1
&gpio1 13 1>;
gpio-fan,speed-map = <0 0
gpio_poweroff {
compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_power_off>;
+ pinctrl-names = "default";
gpios = <&gpio1 4 0>;
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
- pinctrl-0 = < &pmx_nand &pmx_uart1
- &pmx_sata0 &pmx_sata1
- &pmx_led_power
- &pmx_led_red_right_hdd
- &pmx_led_red_left_hdd
- &pmx_led_red_usb_325
- &pmx_button_power
- &pmx_led_red_usb_320
- &pmx_power_off &pmx_power_back_on
- &pmx_power_sata0 &pmx_power_sata1
- &pmx_present_sata0 &pmx_present_sata1
- &pmx_led_white_usb &pmx_fan_tacho
- &pmx_fan_high_speed &pmx_fan_low_speed
- &pmx_button_unmount &pmx_button_reset
- &pmx_temp_alarm >;
+ pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0
+ &pmx_present_sata1 &pmx_fan_tacho
+ &pmx_temp_alarm>;
pinctrl-names = "default";
pmx_sata0: pmx-sata0 {
};
};
sata@80000 {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
status = "okay";
nr-ports = <2>;
};
nand@3000000 {
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
status = "okay";
chip-delay = <35>;
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
+ pinctrl-names = "default";
sata0_power: regulator@1 {
compatible = "regulator-fixed";
ocp@f1000000 {
pinctrl: pinctrl@10000 {
-
- pinctrl-0 = < &pmx_usb_power_enable
- &pmx_led_green &pmx_led_orange >;
- pinctrl-names = "default";
-
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
+ pinctrl-names = "default";
health {
label = "status:green:health";
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = <&pmx_usb_power_enable>;
+ pinctrl-names = "default";
usb_power: regulator@1 {
compatible = "regulator-fixed";
ocp@f1000000 {
pinctrl: pinctrl@10000 {
-
- pinctrl-0 = < &pmx_spi
- &pmx_led_bluetooth &pmx_led_wifi
- &pmx_led_wifi_ap >;
- pinctrl-names = "default";
-
pmx_led_bluetooth: pmx-led-bluetooth {
marvell,pins = "mpp47";
marvell,function = "gpio";
spi@10600 {
status = "okay";
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
m25p40@0 {
#address-cells = <1>;
pinctrl-names = "default";
status = "okay";
/* No CD or WP GPIOs */
+ broken-cd;
};
};
gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
+ &pmx_led_wifi_ap >;
+ pinctrl-names = "default";
bluetooth {
label = "dreamplug:blue:bluetooth";
ocp@f1000000 {
pinctrl: pinctrl@10000 {
-
- pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
- &pmx_led_left_cap_0 &pmx_led_left_cap_1
- &pmx_led_left_cap_2 &pmx_led_left_cap_3
- &pmx_led_right_cap_0 &pmx_led_right_cap_1
- &pmx_led_right_cap_2 &pmx_led_right_cap_3
- >;
- pinctrl-names = "default";
-
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = < &pmx_led_orange
+ &pmx_led_left_cap_0 &pmx_led_left_cap_1
+ &pmx_led_left_cap_2 &pmx_led_left_cap_3
+ &pmx_led_right_cap_0 &pmx_led_right_cap_1
+ &pmx_led_right_cap_2 &pmx_led_right_cap_3
+ >;
+ pinctrl-names = "default";
health {
label = "status:green:health";
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = <&pmx_usb_power_enable>;
+ pinctrl-names = "default";
usb_power: regulator@1 {
compatible = "regulator-fixed";
ocp@f1000000 {
pinctrl: pinctrl@10000 {
-
- pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
- &pmx_led_wmode_r &pmx_led_wmode_g >;
- pinctrl-names = "default";
-
pmx_led_health_r: pmx-led-health-r {
marvell,pins = "mpp46";
marvell,function = "gpio";
mvsdio@90000 {
status = "okay";
+ /* No CD or WP GPIOs */
+ broken-cd;
};
};
gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
+ &pmx_led_wmode_r &pmx_led_wmode_g >;
+ pinctrl-names = "default";
health-r {
label = "guruplug:red:health";
ocp@f1000000 {
pinctrl: pinctrl@10000 {
-
- pinctrl-0 = < &pmx_nand
- &pmx_led_os_red &pmx_power_off
- &pmx_led_os_green &pmx_led_usb_transfer
- &pmx_button_reset &pmx_button_usb_copy >;
- pinctrl-names = "default";
-
pmx_led_os_red: pmx-led-os-red {
marvell,pins = "mpp22";
marvell,function = "gpio";
nand@3000000 {
status = "okay";
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
partition@0 {
label = "u-boot";
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
+ pinctrl-names = "default";
+
button@1 {
label = "USB Copy";
linux,code = <133>;
};
gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
+ &pmx_led_usb_transfer>;
+ pinctrl-names = "default";
green-os {
label = "ib62x0:green:os";
};
gpio_poweroff {
compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_power_off>;
+ pinctrl-names = "default";
gpios = <&gpio0 24 0>;
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
-
- pinctrl-0 = < &pmx_gpio_12 &pmx_gpio_35
- &pmx_gpio_41 &pmx_gpio_42
- &pmx_gpio_43 &pmx_gpio_44
- &pmx_gpio_45 &pmx_gpio_46
- &pmx_gpio_47 &pmx_gpio_48 >;
- pinctrl-names = "default";
-
- pmx_gpio_12: pmx-gpio-12 {
+ pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
- pmx_gpio_35: pmx-gpio-35 {
+ pmx_button_otb: pmx-button-otb {
marvell,pins = "mpp35";
marvell,function = "gpio";
};
- pmx_gpio_41: pmx-gpio-41 {
+ pmx_led_level: pmx-led-level {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
- pmx_gpio_42: pmx-gpio-42 {
+ pmx_led_power_blue: pmx-led-power-blue {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
- pmx_gpio_43: pmx-gpio-43 {
+ pmx_led_power_red: pmx-power-red {
marvell,pins = "mpp43";
marvell,function = "gpio";
};
- pmx_gpio_44: pmx-gpio-44 {
+ pmx_led_usb1: pmx-led-usb1 {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
- pmx_gpio_45: pmx-gpio-45 {
+ pmx_led_usb2: pmx-led-usb2 {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
- pmx_gpio_46: pmx-gpio-46 {
+ pmx_led_usb3: pmx-led-usb3 {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
- pmx_gpio_47: pmx-gpio-47 {
+ pmx_led_usb4: pmx-led-usb4 {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
- pmx_gpio_48: pmx-gpio-48 {
+ pmx_led_otb: pmx-led-otb {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
+ &pmx_led_power_red &pmx_led_usb1
+ &pmx_led_usb2 &pmx_led_usb3
+ &pmx_led_usb4 &pmx_led_otb >;
+ pinctrl-names = "default";
led-level {
label = "led_level";
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
+ pinctrl-names = "default";
+
button@1 {
label = "OTB Button";
linux,code = <133>;
ocp@f1000000 {
pinctrl: pinctrl@10000 {
-
- pinctrl-0 = < &pmx_button_reset &pmx_button_power
- &pmx_led_backup &pmx_led_power
- &pmx_button_otb &pmx_led_rebuild
- &pmx_led_health
- &pmx_led_sata_brt_ctrl_1
+ pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
&pmx_led_sata_brt_ctrl_2
&pmx_led_backup_brt_ctrl_1
&pmx_led_backup_brt_ctrl_2
};
gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = < &pmx_led_backup &pmx_led_power
+ &pmx_led_rebuild &pmx_led_health >;
+ pinctrl-names = "default";
power_led {
label = "status:white:power_led";
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = <&pmx_button_reset &pmx_button_power
+ &pmx_button_otb>;
+ pinctrl-names = "default";
+
+
Power {
label = "Power Button";
linux,code = <116>;
ocp@f1000000 {
sata@80000 {
+ pinctrl-0 = <&pmx_ns2_sata0>;
+ pinctrl-names = "default";
status = "okay";
nr-ports = <1>;
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
-
- pinctrl-0 = < &pmx_nand &pmx_i2c_gpio_sda
- &pmx_i2c_gpio_scl >;
+ pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
pinctrl-names = "default";
pmx_i2c_gpio_sda: pmx-gpio-sda {
};
nand@3000000 {
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
status = "ok";
chip-delay = <25>;
};
};
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = < &gpio0 8 0 /* sda */
+ &gpio0 9 0 >; /* scl */
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ };
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
-
- pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus
- &pmx_fan_low &pmx_fan_high
- &pmx_led_function_red &pmx_led_alarm
- &pmx_led_info &pmx_led_power
- &pmx_fan_lock &pmx_button_function
- &pmx_power_switch &pmx_power_auto_switch
- &pmx_led_function_blue >;
- pinctrl-names = "default";
-
pmx_power_hdd: pmx-power-hdd {
marvell,pins = "mpp10";
marvell,function = "gpo";
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = <&pmx_button_function &pmx_power_switch
+ &pmx_power_auto_switch>;
+ pinctrl-names = "default";
+
button@1 {
label = "Function Button";
linux,code = <357>;
gpio_leds {
compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+ &pmx_led_info &pmx_led_power
+ &pmx_led_function_blue>;
+ pinctrl-names = "default";
led@1 {
label = "lsxl:blue:func";
gpio_fan {
compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+ pinctrl-names = "default";
gpios = <&gpio0 19 1
&gpio0 18 1>;
gpio-fan,speed-map = <0 3
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>;
+ pinctrl-names = "default";
usb_power: regulator@1 {
compatible = "regulator-fixed";
ocp@f1000000 {
pinctrl: pinctrl@10000 {
-
- pinctrl-0 = < &pmx_nand &pmx_uart0
- &pmx_led_health
- &pmx_sata0 &pmx_sata1
- &pmx_led_user1o
- &pmx_led_user1g &pmx_led_user0o
- &pmx_led_user0g &pmx_led_misc
- >;
- pinctrl-names = "default";
-
pmx_led_health: pmx-led-health {
marvell,pins = "mpp7";
marvell,function = "gpo";
serial@12000 {
status = "ok";
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
};
nand@3000000 {
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
status = "okay";
partition@0 {
};
sata@80000 {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
nr-ports = <2>;
status = "okay";
-
};
mvsdio@90000 {
pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
pinctrl-names = "default";
status = "okay";
- cd-gpios = <&gpio1 15 0>;
+ cd-gpios = <&gpio1 15 1>;
/* No WP GPIO */
};
gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = < &pmx_led_health
+ &pmx_led_user1o
+ &pmx_led_user1g &pmx_led_user0o
+ &pmx_led_user0g &pmx_led_misc
+ >;
+ pinctrl-names = "default";
health {
label = "status:green:health";
ocp@f1000000 {
pinctrl: pinctrl@10000 {
-
- pinctrl-0 = < &pmx_uart0
- &pmx_button_power
- &pmx_button_backup
- &pmx_button_reset
- &pmx_led_blue_power
- &pmx_led_blue_activity
- &pmx_led_blue_disk1
- &pmx_led_blue_disk2
- &pmx_led_blue_backup >;
- pinctrl-names = "default";
-
pmx_button_power: pmx-button-power {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
serial@12000 {
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_activity
+ &pmx_led_blue_disk1 &pmx_led_blue_disk2
+ &pmx_led_blue_backup >;
+ pinctrl-names = "default";
power_led {
label = "status:blue:power_led";
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = <&pmx_button_power &pmx_button_backup
+ &pmx_button_reset>;
+ pinctrl-names = "default";
+
button@1 {
label = "Power Button";
linux,code = <116>; /* KEY_POWER */
ocp@f1000000 {
pinctrl: pinctrl@10000 {
- pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0
- &pmx_ns2_sata0 &pmx_ns2_sata1>;
- pinctrl-names = "default";
-
pmx_ns2_sata0: pmx-ns2-sata0 {
marvell,pins = "mpp21";
marvell,function = "sata0";
};
serial@12000 {
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
status = "okay";
};
spi@10600 {
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
status = "okay";
flash@0 {
};
i2c@11000 {
+ pinctrl-0 = <&pmx_twsi0>;
+ pinctrl-names = "default";
status = "okay";
eeprom@50 {
ocp@f1000000 {
sata@80000 {
+ pinctrl-0 = <&pmx_ns2_sata0>;
+ pinctrl-names = "default";
status = "okay";
nr-ports = <1>;
};
ocp@f1000000 {
sata@80000 {
+ pinctrl-0 = <&pmx_ns2_sata0>;
+ pinctrl-names = "default";
status = "okay";
nr-ports = <1>;
};
ocp@f1000000 {
sata@80000 {
+ pinctrl-0 = <&pmx_ns2_sata0 &pmx_ns2_sata1>;
+ pinctrl-names = "default";
status = "okay";
nr-ports = <2>;
};
ocp@f1000000 {
sata@80000 {
+ pinctrl-0 = <&pmx_ns2_sata0>;
+ pinctrl-names = "default";
status = "okay";
nr-ports = <1>;
};
/dts-v1/;
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
/ {
model = "ZyXEL NSA310";
ocp@f1000000 {
pinctrl: pinctrl@10000 {
- pinctrl-0 = < &pmx_led_esata_green
- &pmx_led_esata_red
- &pmx_led_usb_green
- &pmx_led_usb_red
- &pmx_usb_power_off
- &pmx_led_sys_green
- &pmx_led_sys_red
- &pmx_btn_reset
- &pmx_btn_copy
- &pmx_led_copy_green
- &pmx_led_copy_red
- &pmx_led_hdd_green
- &pmx_led_hdd_red
- &pmx_unknown
- &pmx_btn_power
- &pmx_pwr_off >;
+ pinctrl-0 = <&pmx_unknown>;
pinctrl-names = "default";
pmx_led_esata_green: pmx-led-esata-green {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
+ pinctrl-names = "default";
button@1 {
label = "Power Button";
gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red
+ &pmx_led_usb_green &pmx_led_usb_red
+ &pmx_led_sys_green &pmx_led_sys_red
+ &pmx_led_copy_green &pmx_led_copy_red
+ &pmx_led_hdd_green &pmx_led_hdd_red>;
+ pinctrl-names = "default";
green-sys {
label = "nsa310:green:sys";
gpio_poweroff {
compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_pwr_off>;
+ pinctrl-names = "default";
gpios = <&gpio1 16 0>;
};
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = <&pmx_usb_power_off>;
+ pinctrl-names = "default";
usb0_power_off: regulator@1 {
compatible = "regulator-fixed";
ocp@f1000000 {
serial@12000 {
status = "ok";
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
};
serial@12100 {
status = "ok";
+ pinctrl-0 = <&pmx_uart1>;
+ pinctrl-names = "default";
};
nand@3000000 {
chip-delay = <25>;
status = "okay";
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
partition@0 {
label = "uboot";
i2c@11100 {
status = "okay";
+ pinctrl-0 = <&pmx_twsi1>;
+ pinctrl-names = "default";
s35390a: s35390a@30 {
compatible = "s35390a";
};
pinctrl: pinctrl@10000 {
- pinctrl-0 = < &pmx_nand &pmx_uart0
- &pmx_uart1 &pmx_twsi1
- &pmx_dip_sw0 &pmx_dip_sw1
- &pmx_dip_sw2 &pmx_dip_sw3
- &pmx_gpio_0 &pmx_gpio_1
- &pmx_gpio_2 &pmx_gpio_3
- &pmx_gpio_4 &pmx_gpio_5
- &pmx_gpio_6 &pmx_gpio_7
- &pmx_led_red &pmx_led_green
- &pmx_led_yellow >;
+ pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
pinctrl-names = "default";
pmx_uart0: pmx-uart0 {
marvell,function = "sysrst";
};
- pmx_dip_sw0: pmx-dip-sw0 {
- marvell,pins = "mpp20";
- marvell,function = "gpio";
- };
-
- pmx_dip_sw1: pmx-dip-sw1 {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
- pmx_dip_sw2: pmx-dip-sw2 {
- marvell,pins = "mpp22";
- marvell,function = "gpio";
- };
-
- pmx_dip_sw3: pmx-dip-sw3 {
- marvell,pins = "mpp23";
- marvell,function = "gpio";
- };
-
- pmx_gpio_0: pmx-gpio-0 {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
-
- pmx_gpio_1: pmx-gpio-1 {
- marvell,pins = "mpp25";
- marvell,function = "gpio";
- };
-
- pmx_gpio_2: pmx-gpio-2 {
- marvell,pins = "mpp26";
+ pmx_dip_switches: pmx-dip-switches {
+ marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23";
marvell,function = "gpio";
};
- pmx_gpio_3: pmx-gpio-3 {
- marvell,pins = "mpp27";
- marvell,function = "gpio";
- };
-
- pmx_gpio_4: pmx-gpio-4 {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- pmx_gpio_5: pmx-gpio-5 {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- pmx_gpio_6: pmx-gpio-6 {
- marvell,pins = "mpp30";
- marvell,function = "gpio";
- };
-
- pmx_gpio_7: pmx-gpio-7 {
- marvell,pins = "mpp31";
+ pmx_gpio_header: pmx-gpio-header {
+ marvell,pins = "mpp24", "mpp25", "mpp26", "mpp27",
+ "mpp28", "mpp29", "mpp30", "mpp31";
marvell,function = "gpio";
};
marvell,function = "gpio";
};
- pmx_led_red: pmx-led-red {
- marvell,pins = "mpp41";
- marvell,function = "gpio";
- };
-
- pmx_led_green: pmx-led-green {
- marvell,pins = "mpp42";
- marvell,function = "gpio";
- };
-
- pmx_led_yellow: pmx-led-yellow {
- marvell,pins = "mpp43";
+ pmx_leds: pmx-leds {
+ marvell,pins = "mpp41", "mpp42", "mpp43";
marvell,function = "gpio";
};
};
gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_leds>;
+ pinctrl-names = "default";
led-red {
label = "obsa6:red:stat";
gpios = <&gpio1 11 1>;
};
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_gpio_init>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ label = "Init Button";
+ linux,code = <116>;
+ gpios = <&gpio1 6 0>;
+ };
+ };
};
--- /dev/null
+/*
+ * kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
+
+/ {
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pmx_usb_power_enable: pmx-usb-power-enable {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ pmx_led_red: pmx-led-red {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ pmx_led_blue: pmx-led-blue {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+ pmx_sdio_cd: pmx-sdio-cd {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_sdio_wp: pmx-sdio-wp {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ };
+ serial@12000 {
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ nand@3000000 {
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>;
+ };
+
+ partition@100000 {
+ label = "uImage";
+ reg = <0x0100000 0x400000>;
+ };
+
+ partition@500000 {
+ label = "root";
+ reg = <0x0500000 0x1fb00000>;
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_usb_power_enable>;
+ pinctrl-names = "default";
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 29 0>;
+ };
+ };
+};
--- /dev/null
+/*
+ * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+
+/include/ "kirkwood-sheevaplug-common.dtsi"
+
+/ {
+ model = "Globalscale Technologies eSATA SheevaPlug";
+ compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ ocp@f1000000 {
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ mvsdio@90000 {
+ pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
+ pinctrl-names = "default";
+ status = "okay";
+ cd-gpios = <&gpio1 12 1>;
+ wp-gpios = <&gpio1 15 0>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_blue>;
+ pinctrl-names = "default";
+
+ health {
+ label = "sheevaplug:blue:health";
+ gpios = <&gpio1 17 1>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
--- /dev/null
+/*
+ * kirkwood-sheevaplug-esata.dts - Device tree file for Sheevaplug
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+
+/include/ "kirkwood-sheevaplug-common.dtsi"
+
+/ {
+ model = "Globalscale Technologies SheevaPlug";
+ compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ ocp@f1000000 {
+ mvsdio@90000 {
+ pinctrl-0 = <&pmx_sdio>;
+ pinctrl-names = "default";
+ status = "okay";
+ /* No CD or WP GPIOs */
+ broken-cd;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
+ pinctrl-names = "default";
+
+ health {
+ label = "sheevaplug:blue:health";
+ gpios = <&gpio1 17 1>;
+ linux,default-trigger = "default-on";
+ };
+
+ misc {
+ label = "sheevaplug:red:misc";
+ gpios = <&gpio1 14 1>;
+ };
+ };
+};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
- /*
- * GPIO LED layout
- *
- * /-SYS_LED(2)
- * |
- * | /-DISK_LED
- * | |
- * | | /-WLAN_LED(2)
- * | | |
- * [SW] [*] [*] [*]
- */
-
/*
* Switch positions
*
* | | |
* PS [L] [I] [R] LEDS
*/
- pinctrl-0 = < &pmx_led_disk_yellow
- &pmx_sata0_pwr_enable
- &pmx_led_sys_red
- &pmx_led_sys_blue
- &pmx_led_wifi_green
- &pmx_sw_left
- &pmx_sw_right
- &pmx_sw_idle
- &pmx_sw_left2
- &pmx_led_wifi_yellow
- &pmx_uart0
- &pmx_nand
- &pmx_twsi0 >;
+ pinctrl-0 = <&pmx_sw_left &pmx_sw_right
+ &pmx_sw_idle &pmx_sw_left2>;
pinctrl-names = "default";
pmx_led_disk_yellow: pmx-led-disk-yellow {
serial@12000 {
status = "ok";
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
};
nand@3000000 {
status = "okay";
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
partition@0 {
label = "u-boot";
i2c@11000 {
status = "ok";
+ pinctrl-0 = <&pmx_twsi0>;
+ pinctrl-names = "default";
};
mvsdio@90000 {
pinctrl-names = "default";
status = "okay";
/* No CD or WP GPIOs */
+ broken-cd;
};
};
gpio-leds {
+ /*
+ * GPIO LED layout
+ *
+ * /-SYS_LED(2)
+ * |
+ * | /-DISK_LED
+ * | |
+ * | | /-WLAN_LED(2)
+ * | | |
+ * [SW] [*] [*] [*]
+ */
+
compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_disk_yellow &pmx_led_sys_red
+ &pmx_led_sys_blue &pmx_led_wifi_green
+ &pmx_led_wifi_yellow>;
+ pinctrl-names = "default";
disk {
label = "topkick:yellow:disk";
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = <&pmx_sata0_pwr_enable>;
+ pinctrl-names = "default";
sata0_power: regulator@1 {
compatible = "regulator-fixed";
ocp@f1000000 {
pinctrl: pinctrl@10000 {
- pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi
- &pmx_twsi0 &pmx_sata0 &pmx_sata1
- &pmx_ram_size &pmx_reset_button
- &pmx_USB_copy_button &pmx_board_id>;
+ pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
pinctrl-names = "default";
pmx_ram_size: pmx-ram-size {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+ pinctrl-names = "default";
+
button@1 {
label = "USB Copy";
linux,code = <133>;
ocp@f1000000 {
pinctrl: pinctrl@10000 {
- pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi
- &pmx_twsi0 &pmx_sata0 &pmx_sata1
- &pmx_ram_size &pmx_reset_button
- &pmx_USB_copy_button &pmx_board_id>;
+ pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
pinctrl-names = "default";
pmx_ram_size: pmx-ram-size {
marvell,function = "gpio";
};
};
+ pcie-controller {
+ status = "okay";
+
+ pcie@2,0 {
+ status = "okay";
+ };
+ };
+
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+ pinctrl-names = "default";
+
button@1 {
label = "USB Copy";
linux,code = <133>;
i2c@11000 {
status = "okay";
clock-frequency = <400000>;
+ pinctrl-0 = <&pmx_twsi0>;
+ pinctrl-names = "default";
s35390a: s35390a@30 {
compatible = "s35390a";
serial@12000 {
clock-frequency = <200000000>;
status = "okay";
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
};
serial@12100 {
clock-frequency = <200000000>;
status = "okay";
+ pinctrl-0 = <&pmx_uart1>;
+ pinctrl-names = "default";
};
poweroff@12100 {
compatible = "qnap,power-off";
};
spi@10600 {
status = "okay";
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
m25p128@0 {
#address-cells = <1>;
};
};
sata@80000 {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
status = "okay";
nr-ports = <2>;
};
compatible = "marvell,kirkwood";
interrupt-parent = <&intc>;
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "marvell,feroceon";
+ clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
+ clock-names = "cpu_clk", "ddrclk", "powersave";
+ };
+ };
+
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
ocp@f1000000 {
compatible = "simple-bus";
- ranges = <0x00000000 0xf1000000 0x4000000
+ ranges = <0x00000000 0xf1000000 0x0100000
0xe0000000 0xe0000000 0x8100000 /* PCIE */
+ 0xf4000000 0xf4000000 0x0000400
0xf5000000 0xf5000000 0x0000400>;
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
- rtc@10300 {
- compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
- reg = <0x10300 0x20>;
- interrupts = <53>;
- clocks = <&gate_clk 7>;
- };
-
spi@10600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
status = "okay";
};
- sata@80000 {
- compatible = "marvell,orion-sata";
- reg = <0x80000 0x5000>;
- interrupts = <21>;
- clocks = <&gate_clk 14>, <&gate_clk 15>;
- clock-names = "0", "1";
- status = "disabled";
- };
-
nand@3000000 {
#address-cells = <1>;
#size-cells = <1>;
ale = <1>;
bank-width = <1>;
compatible = "marvell,orion-nand";
- reg = <0x3000000 0x400>;
+ reg = <0xf4000000 0x400>;
chip-delay = <25>;
/* set partition map and/or chip-delay in board dts */
clocks = <&gate_clk 7>;
clocks = <&gate_clk 17>;
status = "okay";
};
-
- mvsdio@90000 {
- compatible = "marvell,orion-sdio";
- reg = <0x90000 0x200>;
- interrupts = <28>;
- clocks = <&gate_clk 4>;
- status = "disabled";
- };
};
};
interrupt-parent = <&mic>;
cpus {
- cpu@0 {
- compatible = "arm,arm926ejs";
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
};
};
* kind, whether express or implied.
*/
-/include/ "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+#include "skeleton.dtsi"
/ {
compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
};
cpus {
- cpu@0 {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
compatible = "arm,arm1136jf-s";
+ device_type = "cpu";
};
};
*/
/dts-v1/;
-/include/ "omap2420.dtsi"
+#include "omap2420.dtsi"
/ {
model = "TI OMAP2420 H4 board";
* kind, whether express or implied.
*/
-/include/ "omap2.dtsi"
+#include "omap2.dtsi"
/ {
compatible = "ti,omap2420", "ti,omap2";
* kind, whether express or implied.
*/
-/include/ "omap2.dtsi"
+#include "omap2.dtsi"
/ {
compatible = "ti,omap2430", "ti,omap2";
*/
/dts-v1/;
-/include/ "omap36xx.dtsi"
+#include "omap36xx.dtsi"
/ {
model = "TI OMAP3 BeagleBoard xM";
heartbeat {
label = "beagleboard::usr0";
- gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+ gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
linux,default-trigger = "heartbeat";
};
mmc {
label = "beagleboard::usr1";
- gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+ gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
linux,default-trigger = "mmc0";
};
};
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ user {
+ label = "user";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x114>;
+ gpio-key,wakeup;
+ };
+
+ };
+};
+
+&omap3_pmx_wkup {
+ gpio1_pins: pinmux_gpio1_pins {
+ pinctrl-single,pins = <
+ 0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
+ >;
+ };
};
&i2c1 {
};
};
-/include/ "twl4030.dtsi"
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
&i2c2 {
clock-frequency = <400000>;
mode = <3>;
power = <50>;
};
+
+&omap3_pmx_core {
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+ >;
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_pins>;
+};
*/
/dts-v1/;
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
/ {
model = "TI OMAP3 BeagleBoard";
compatible = "gpio-leds";
pmu_stat {
label = "beagleboard::pmu_stat";
- gpios = <&twl_gpio 19 0>; /* LEDB */
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
};
heartbeat {
label = "beagleboard::usr0";
- gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+ gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
linux,default-trigger = "heartbeat";
};
mmc {
label = "beagleboard::usr1";
- gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+ gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
linux,default-trigger = "mmc0";
};
};
reset-supply = <&hsusb2_reset>;
vcc-supply = <&hsusb2_power>;
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ user {
+ label = "user";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x114>;
+ gpio-key,wakeup;
+ };
+
+ };
+};
+
+&omap3_pmx_wkup {
+ gpio1_pins: pinmux_gpio1_pins {
+ pinctrl-single,pins = <
+ 0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+ >;
+ };
};
&omap3_pmx_core {
hsusbb2_pins: pinmux_hsusbb2_pins {
pinctrl-single,pins = <
- 0x5c0 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */
- 0x5c2 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */
- 0x5c4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */
- 0x5c6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */
- 0x5c8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */
- 0x5cA 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */
- 0x1a4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */
- 0x1a6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */
- 0x1a8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */
- 0x1aa 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */
- 0x1ac 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */
- 0x1ae 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */
+ 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_clk */
+ 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_stp */
+ 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dir */
+ 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_nxt */
+ 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat0 */
+ 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat1 */
+ 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat2 */
+ 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat3 */
+ 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat4 */
+ 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat5 */
+ 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat6 */
+ 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat7 */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
};
};
};
-/include/ "twl4030.dtsi"
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
&mmc1 {
vmmc-supply = <&vmmc1>;
*/
ti,pulldowns = <0x03a1c4>;
};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_pins>;
+};
*/
/dts-v1/;
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
/ {
model = "TimLL OMAP3 Devkit8000";
compatible = "timll,omap3-devkit8000", "ti,omap3";
heartbeat {
label = "devkit8000::led1";
- gpios = <&gpio6 26 0>; /* 186 -> LED1 */
+ gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */
default-state = "on";
linux,default-trigger = "heartbeat";
};
mmc {
label = "devkit8000::led2";
- gpios = <&gpio6 3 0>; /* 163 -> LED2 */
+ gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */
default-state = "on";
linux,default-trigger = "none";
};
usr {
label = "devkit8000::led3";
- gpios = <&gpio6 4 0>; /* 164 -> LED3 */
+ gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */
default-state = "on";
linux,default-trigger = "usr";
};
status = "disabled";
};
-/include/ "twl4030.dtsi"
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
&mmc1 {
vmmc-supply = <&vmmc1>;
*/
/dts-v1/;
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
/ {
model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)";
compatible = "gpio-leds";
ledb {
label = "omap3evm::ledb";
- gpios = <&twl_gpio 19 0>; /* LEDB */
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
linux,default-trigger = "default-on";
};
};
};
};
-/include/ "twl4030.dtsi"
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
&i2c2 {
clock-frequency = <400000>;
*/
/dts-v1/;
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
/ {
memory {
&omap3_pmx_core {
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x152 0x100 /* uart1_rx.uart1_rx INPUT | MODE0 */
- 0x14c 0 /* uart1_tx.uart1_tx OUTPUT | MODE0 */
+ 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+ 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0x14a 0x100 /* uart2_rx.uart2_rx INPUT | MODE0 */
- 0x148 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */
+ 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0 */
- 0x170 0 /* uart3_tx.uart3_tx OUTPUT | MODE0 */
+ 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
+ 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x114 0x0118 /* sdmmc1_clk.sdmmc1_clk INPUT PULLUP | MODE 0 */
- 0x116 0x0118 /* sdmmc1_cmd.sdmmc1_cmd INPUT PULLUP | MODE 0 */
- 0x118 0x0118 /* sdmmc1_dat0.sdmmc1_dat0 INPUT PULLUP | MODE 0 */
- 0x11a 0x0118 /* sdmmc1_dat1.sdmmc1_dat1 INPUT PULLUP | MODE 0 */
- 0x11c 0x0118 /* sdmmc1_dat2.sdmmc1_dat2 INPUT PULLUP | MODE 0 */
- 0x11e 0x0118 /* sdmmc1_dat3.sdmmc1_dat3 INPUT PULLUP | MODE 0 */
- 0x120 0x0100 /* sdmmc1_dat4.sdmmc1_dat4 INPUT | MODE 0 */
- 0x122 0x0100 /* sdmmc1_dat5.sdmmc1_dat5 INPUT | MODE 0 */
- 0x124 0x0100 /* sdmmc1_dat6.sdmmc1_dat6 INPUT | MODE 0 */
- 0x126 0x0100 /* sdmmc1_dat7.sdmmc1_dat7 INPUT | MODE 0 */
+ 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
+ 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
+ 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
+ 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
+ >;
+ };
+
+ smsc911x_pins: pinmux_smsc911x_pins {
+ pinctrl-single,pins = <
+ 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
>;
};
};
};
};
-/include/ "twl4030.dtsi"
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
&i2c2 {
clock-frequency = <400000>;
* published by the Free Software Foundation.
*/
-/include/ "omap3-igep.dtsi"
+#include "omap3-igep.dtsi"
/ {
model = "IGEPv2";
compatible = "gpio-leds";
boot {
label = "omap3:green:boot";
- gpios = <&gpio1 26 0>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
user0 {
label = "omap3:red:user0";
- gpios = <&gpio1 27 0>;
+ gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
user1 {
label = "omap3:red:user1";
- gpios = <&gpio1 28 0>;
+ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
user2 {
label = "omap3:green:user1";
- gpios = <&twl_gpio 19 1>;
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
};
};
+
+ vddvario: regulator-vddvario {
+ compatible = "regulator-fixed";
+ regulator-name = "vddvario";
+ regulator-always-on;
+ };
+
+ vdd33a: regulator-vdd33a {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33a";
+ regulator-always-on;
+ };
};
&i2c3 {
reg = <0x50>;
};
};
+
+&gpmc {
+ ranges = <0 0 0x00000000 0x20000000>,
+ <5 0 0x2c000000 0x01000000>;
+
+ nand@0,0 {
+ linux,mtd-name= "micron,mt29c4g96maz";
+ reg = <0 0 0>;
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "bch8";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SPL";
+ reg = <0 0x100000>;
+ };
+ partition@0x80000 {
+ label = "U-Boot";
+ reg = <0x100000 0x180000>;
+ };
+ partition@0x1c0000 {
+ label = "Environment";
+ reg = <0x280000 0x100000>;
+ };
+ partition@0x280000 {
+ label = "Kernel";
+ reg = <0x380000 0x300000>;
+ };
+ partition@0x780000 {
+ label = "Filesystem";
+ reg = <0x680000 0x1f980000>;
+ };
+ };
+
+ ethernet@5,0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc911x_pins>;
+ compatible = "smsc,lan9221", "smsc,lan9115";
+ reg = <5 0 0xff>;
+ bank-width = <2>;
+
+ gpmc,mux-add-data;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <186>;
+ gpmc,cs-wr-off-ns = <186>;
+ gpmc,adv-on-ns = <12>;
+ gpmc,adv-rd-off-ns = <48>;
+ gpmc,adv-wr-off-ns = <48>;
+ gpmc,oe-on-ns = <54>;
+ gpmc,oe-off-ns = <168>;
+ gpmc,we-on-ns = <54>;
+ gpmc,we-off-ns = <168>;
+ gpmc,rd-cycle-ns = <186>;
+ gpmc,wr-cycle-ns = <186>;
+ gpmc,access-ns = <114>;
+ gpmc,page-burst-access-ns = <6>;
+ gpmc,bus-turnaround-ns = <12>;
+ gpmc,cycle2cycle-delay-ns = <18>;
+ gpmc,wr-data-mux-bus-ns = <90>;
+ gpmc,wr-access-ns = <186>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 8>;
+ vmmc-supply = <&vddvario>;
+ vmmc_aux-supply = <&vdd33a>;
+ reg-io-width = <4>;
+
+ smsc,save-mac-address;
+ };
+};
* published by the Free Software Foundation.
*/
-/include/ "omap3-igep.dtsi"
+#include "omap3-igep.dtsi"
/ {
model = "IGEP COM Module";
compatible = "gpio-leds";
boot {
label = "omap3:green:boot";
- gpios = <&twl_gpio 13 1>;
+ gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
user0 {
label = "omap3:red:user0";
- gpios = <&twl_gpio 18 1>; /* LEDA */
+ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
default-state = "off";
};
user1 {
label = "omap3:green:user1";
- gpios = <&twl_gpio 19 1>; /* LEDB */
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */
default-state = "off";
};
user2 {
label = "omap3:red:user1";
- gpios = <&gpio1 16 1>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
};
+
+&gpmc {
+ ranges = <0 0 0x00000000 0x20000000>;
+
+ nand@0,0 {
+ linux,mtd-name= "micron,mt29c4g96maz";
+ reg = <0 0 0>;
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "bch8";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SPL";
+ reg = <0 0x100000>;
+ };
+ partition@0x80000 {
+ label = "U-Boot";
+ reg = <0x100000 0x180000>;
+ };
+ partition@0x1c0000 {
+ label = "Environment";
+ reg = <0x280000 0x100000>;
+ };
+ partition@0x280000 {
+ label = "Kernel";
+ reg = <0x380000 0x300000>;
+ };
+ partition@0x780000 {
+ label = "Filesystem";
+ reg = <0x680000 0x1f980000>;
+ };
+ };
+};
*/
/dts-v1/;
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
/ {
pwmleds {
label = "overo:blue:COM";
pwms = <&twl_pwmled 1 7812500>;
max-brightness = <127>;
+ linux,default-trigger = "mmc0";
};
};
};
};
-/include/ "twl4030.dtsi"
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
/* i2c2 pins are used for gpio */
&i2c2 {
mode = <3>;
power = <50>;
};
+
+&omap3_pmx_core {
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
* Tobi expansion board is manufactured by Gumstix Inc.
*/
-/include/ "omap3-overo.dtsi"
+#include "omap3-overo.dtsi"
/ {
model = "TI OMAP3 Gumstix Overo on Tobi";
compatible = "gpio-leds";
heartbeat {
label = "overo:red:gpio21";
- gpios = <&gpio1 21 0>;
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
+
+ vddvario: regulator-vddvario {
+ compatible = "regulator-fixed";
+ regulator-name = "vddvario";
+ regulator-always-on;
+ };
+
+ vdd33a: regulator-vdd33a {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33a";
+ regulator-always-on;
+ };
+};
+
+&gpmc {
+ ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
+
+ ethernet@5,0 {
+ compatible = "smsc,lan9221", "smsc,lan9115";
+ reg = <5 0 0xff>;
+ bank-width = <2>;
+
+ gpmc,mux-add-data;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <42>;
+ gpmc,cs-wr-off-ns = <36>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <12>;
+ gpmc,adv-wr-off-ns = <12>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <42>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <36>;
+ gpmc,rd-cycle-ns = <60>;
+ gpmc,wr-cycle-ns = <54>;
+ gpmc,access-ns = <36>;
+ gpmc,page-burst-access-ns = <0>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <18>;
+ gpmc,wr-access-ns = <42>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
+ reg-io-width = <4>;
+ };
};
&i2c3 {
* kind, whether express or implied.
*/
-/include/ "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+#include "skeleton.dtsi"
/ {
compatible = "ti,omap3430", "ti,omap3";
};
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
cpu@0 {
compatible = "arm,cortex-a8";
+ device_type = "cpu";
+ reg = <0x0>;
};
};
*/
/dts-v1/;
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
/ {
model = "TI OMAP3430 SDP";
};
};
-/include/ "twl4030.dtsi"
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
&mmc1 {
vmmc-supply = <&vmmc1>;
* kind, whether express or implied.
*/
-/include/ "omap3.dtsi"
+#include "omap3.dtsi"
/ {
cpus {
* kind, whether express or implied.
*/
-/include/ "omap3.dtsi"
+#include "omap3.dtsi"
/ {
aliases {
*/
/dts-v1/;
-/include/ "omap443x.dtsi"
-/include/ "omap4-panda-common.dtsi"
+#include "omap443x.dtsi"
+#include "omap4-panda-common.dtsi"
/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
- 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */
- 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+ 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-/include/ "elpida_ecb240abacn.dtsi"
+#include "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 PandaBoard";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
- leds {
+ leds: leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &led_wkgpio_pins
+ >;
+
heartbeat {
label = "pandaboard::status1";
- gpios = <&gpio1 7 0>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
mmc {
label = "pandaboard::status2";
- gpios = <&gpio1 8 0>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
};
"AFML", "Line In",
"AFMR", "Line In";
};
+
+ /*
+ * Temp hack: Need to be replaced with the proper gpio-controlled
+ * reset driver as soon it will be merged.
+ * http://thread.gmane.org/gmane.linux.drivers.devicetree/36830
+ */
+ /* HS USB Port 1 RESET */
+ hsusb1_reset: hsusb1_reset_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb1_reset";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 30 0>; /* gpio_62 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ /* HS USB Port 1 Power */
+ hsusb1_power: hsusb1_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 1 0>; /* gpio_1 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ /*
+ * boot-on is required along with always-on as the
+ * regulator framework doesn't enable the regulator
+ * if boot-on is not there.
+ */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ reset-supply = <&hsusb1_reset>;
+ vcc-supply = <&hsusb1_power>;
+ /**
+ * FIXME:
+ * put the right clock phandle here when available
+ * clocks = <&auxclk3>;
+ * clock-names = "main_clk";
+ */
+ clock-frequency = <19200000>;
+ };
};
&omap4_pmx_wkup {
twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
pinctrl-single,pins = <
- 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+ 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */
>;
};
};
&mcbsp1_pins
&dss_hdmi_pins
&tpd12s015_pins
+ &hsusbb1_pins
>;
twl6030_pins: pinmux_twl6030_pins {
pinctrl-single,pins = <
- 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+ 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */
>;
};
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
- 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
- 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */
+ 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
+ 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
- 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
- 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
- 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
- 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
- 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
+ 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
+ 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
+ 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
+ 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
+ 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
- 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
- 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
- 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
- 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
+ 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
- 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
- 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+ 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
- 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */
- 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
- 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+ 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
+ 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
+ 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
+ >;
+ };
+
+ hsusbb1_pins: pinmux_hsusbb1_pins {
+ pinctrl-single,pins = <
+ 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+ 0x84 (PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+ 0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+ 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+ 0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+ 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+ 0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+ 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+ 0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+ 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+ 0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+ 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
- 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */
- 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */
- 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
- 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */
- 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ >;
+ };
+};
+
+&omap4_pmx_wkup {
+ led_wkgpio_pins: pinmux_leds_wkpins {
+ pinctrl-single,pins = <
+ 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
+ 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
>;
};
};
twl: twl@48 {
reg = <0x48>;
- /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
- interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+ /* IRQ# = 7 */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
- /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
- interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
+ /* IRQ# = 119 */
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
- ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
+ ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
};
};
-/include/ "twl6030.dtsi"
+#include "twl6030.dtsi"
&i2c2 {
pinctrl-names = "default";
mode = <3>;
power = <50>;
};
+
+&usbhshost {
+ port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy>;
+};
*/
/dts-v1/;
-/include/ "omap4460.dtsi"
-/include/ "omap4-panda-common.dtsi"
+#include "omap4460.dtsi"
+#include "omap4-panda-common.dtsi"
/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
&sound {
/* PandaboardES has external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
- 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */
- 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+ 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
+
+&omap4_pmx_core {
+ led_gpio_pins: gpio_led_pmx {
+ pinctrl-single,pins = <
+ 0xb6 (PIN_OUTPUT | MUX_MODE3) /* gpio_110 */
+ >;
+ };
+};
+
+&led_wkgpio_pins {
+ pinctrl-single,pins = <
+ 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
+ >;
+};
+
+&leds {
+ pinctrl-0 = <
+ &led_gpio_pins
+ &led_wkgpio_pins
+ >;
+
+ heartbeat {
+ gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+ };
+ mmc {
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+};
*/
/dts-v1/;
-/include/ "omap443x.dtsi"
-/include/ "omap4-panda-common.dtsi"
+#include "omap443x.dtsi"
+#include "omap4-panda-common.dtsi"
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-/include/ "omap4-sdp.dts"
+#include "omap4-sdp.dts"
/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
- 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */
- 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+ 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
*/
/dts-v1/;
-/include/ "omap443x.dtsi"
-/include/ "elpida_ecb240abacn.dtsi"
+#include "omap443x.dtsi"
+#include "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 SDP board";
compatible = "gpio-leds";
debug0 {
label = "omap4:green:debug0";
- gpios = <&gpio2 29 0>; /* 61 */
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
};
debug1 {
label = "omap4:green:debug1";
- gpios = <&gpio1 30 0>; /* 30 */
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
};
debug2 {
label = "omap4:green:debug2";
- gpios = <&gpio1 7 0>; /* 7 */
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
};
debug3 {
label = "omap4:green:debug3";
- gpios = <&gpio1 8 0>; /* 8 */
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
};
debug4 {
label = "omap4:green:debug4";
- gpios = <&gpio2 18 0>; /* 50 */
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
};
user1 {
label = "omap4:blue:user";
- gpios = <&gpio6 9 0>; /* 169 */
+ gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
};
user2 {
label = "omap4:red:user";
- gpios = <&gpio6 10 0>; /* 170 */
+ gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
};
user3 {
label = "omap4:green:user";
- gpios = <&gpio5 11 0>; /* 139 */
+ gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
};
};
twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
pinctrl-single,pins = <
- 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+ 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */
>;
};
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */
- 0xda 0 /* uart2_rts.uart2_rts OUTPUT | MODE0 */
- 0xdc 0x118 /* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */
- 0xde 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */
+ 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
+ 0xda (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
+ 0xdc (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
+ 0xde (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x100 0x118 /* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */
- 0x102 0 /* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */
- 0x104 0x100 /* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */
- 0x106 0 /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+ 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
+ 0x102 (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
+ 0x104 (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ 0x106 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
uart4_pins: pinmux_uart4_pins {
pinctrl-single,pins = <
- 0x11c 0x100 /* uart4_rx.uart4_rx INPUT | MODE0 */
- 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */
+ 0x11c (PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
+ 0x11e (PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
>;
};
twl6030_pins: pinmux_twl6030_pins {
pinctrl-single,pins = <
- 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+ 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */
>;
};
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
- 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
- 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */
+ 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
+ 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
- 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
- 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
- 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
- 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
- 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
+ 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
+ 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
+ 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
+ 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
+ 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
>;
};
dmic_pins: pinmux_dmic_pins {
pinctrl-single,pins = <
- 0xd0 0 /* abe_dmic_clk1.abe_dmic_clk1 OUTPUT | MODE0 */
- 0xd2 0x100 /* abe_dmic_din1.abe_dmic_din1 INPUT | MODE0 */
- 0xd4 0x100 /* abe_dmic_din2.abe_dmic_din2 INPUT | MODE0 */
- 0xd6 0x100 /* abe_dmic_din3.abe_dmic_din3 INPUT | MODE0 */
+ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
+ 0xd2 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
+ 0xd4 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
+ 0xd6 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
- 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
- 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
- 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
- 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
+ 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
>;
};
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
- 0xb6 0x100 /* abe_mcbsp2_clkx.abe_mcbsp2_clkx INPUT | MODE0 */
- 0xb8 0x108 /* abe_mcbsp2_dr.abe_mcbsp2_dr INPUT PULLDOWN | MODE0 */
- 0xba 0x8 /* abe_mcbsp2_dx.abe_mcbsp2_dx OUTPUT PULLDOWN | MODE0 */
- 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
+ 0xb6 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
+ 0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
+ 0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
+ 0xbc (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
>;
};
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
- 0xf2 0x100 /* mcspi1_clk.mcspi1_clk INPUT | MODE0 */
- 0xf4 0x100 /* mcspi1_somi.mcspi1_somi INPUT | MODE0 */
- 0xf6 0x100 /* mcspi1_simo.mcspi1_simo INPUT | MODE0 */
- 0xf8 0x100 /* mcspi1_cs0.mcspi1_cs0 INPUT | MODE0*/
+ 0xf2 (PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ 0xf4 (PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ 0xf6 (PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ 0xf8 (PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
- 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
- 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+ 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
- 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */
- 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
- 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+ 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
+ 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
+ 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
- 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */
- 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */
- 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
- 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */
- 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */
+ 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
};
twl: twl@48 {
reg = <0x48>;
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
- interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
compatible = "ti,twl6040";
reg = <0x4b>;
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
- interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
};
};
-/include/ "twl6030.dtsi"
+#include "twl6030.dtsi"
&i2c2 {
pinctrl-names = "default";
spi-max-frequency = <24000000>;
reg = <0>;
interrupt-parent = <&gpio2>;
- interrupts = <2 8>; /* gpio line 34, low triggered */
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
vdd-supply = <&vdd_eth>;
};
};
*/
/dts-v1/;
-/include/ "omap443x.dtsi"
+#include "omap443x.dtsi"
/ {
model = "Variscite OMAP4 SOM";
twl: twl@48 {
reg = <0x48>;
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
- interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
};
-/include/ "twl6030.dtsi"
+#include "twl6030.dtsi"
&i2c2 {
clock-frequency = <400000>;
spi-max-frequency = <24000000>;
reg = <0>;
interrupt-parent = <&gpio6>;
- interrupts = <11 8>; /* gpio line 171, low triggered */
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio line 171 */
vdd-supply = <&vdd_eth>;
};
};
* published by the Free Software Foundation.
*/
-/*
- * Carveout for multimedia usecases
- * It should be the last 48MB of the first 512MB memory part
- * In theory, it should not even exist. That zone should be reserved
- * dynamically during the .reserve callback.
- */
-/memreserve/ 0x9d000000 0x03000000;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
compatible = "ti,omap4430", "ti,omap4";
};
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
cpu@0 {
compatible = "arm,cortex-a9";
+ device_type = "cpu";
next-level-cache = <&L2>;
+ reg = <0x0>;
};
cpu@1 {
compatible = "arm,cortex-a9";
+ device_type = "cpu";
next-level-cache = <&L2>;
+ reg = <0x1>;
};
};
local-timer@0x48240600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x48240600 0x20>;
- interrupts = <1 13 0x304>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
};
/*
reg = <0x44000000 0x1000>,
<0x44800000 0x2000>,
<0x45000000 0x1000>;
- interrupts = <0 9 0x4>,
- <0 10 0x4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
counter32k: counter@4a304000 {
compatible = "ti,omap-counter32k";
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
- interrupts = <0 12 0x4>,
- <0 13 0x4>,
- <0 14 0x4>,
- <0 15 0x4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <127>;
gpio1: gpio@4a310000 {
compatible = "ti,omap4-gpio";
reg = <0x4a310000 0x200>;
- interrupts = <0 29 0x4>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio1";
ti,gpio-always-on;
gpio-controller;
gpio2: gpio@48055000 {
compatible = "ti,omap4-gpio";
reg = <0x48055000 0x200>;
- interrupts = <0 30 0x4>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
gpio3: gpio@48057000 {
compatible = "ti,omap4-gpio";
reg = <0x48057000 0x200>;
- interrupts = <0 31 0x4>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
gpio4: gpio@48059000 {
compatible = "ti,omap4-gpio";
reg = <0x48059000 0x200>;
- interrupts = <0 32 0x4>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
gpio5: gpio@4805b000 {
compatible = "ti,omap4-gpio";
reg = <0x4805b000 0x200>;
- interrupts = <0 33 0x4>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
gpio6: gpio@4805d000 {
compatible = "ti,omap4-gpio";
reg = <0x4805d000 0x200>;
- interrupts = <0 34 0x4>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
reg = <0x50000000 0x1000>;
#address-cells = <2>;
#size-cells = <1>;
- interrupts = <0 20 0x4>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
ti,hwmods = "gpmc";
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
- interrupts = <0 72 0x4>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts = <0 73 0x4>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts = <0 74 0x4>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts = <0 70 0x4>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
i2c1: i2c@48070000 {
compatible = "ti,omap4-i2c";
reg = <0x48070000 0x100>;
- interrupts = <0 56 0x4>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
i2c2: i2c@48072000 {
compatible = "ti,omap4-i2c";
reg = <0x48072000 0x100>;
- interrupts = <0 57 0x4>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
i2c3: i2c@48060000 {
compatible = "ti,omap4-i2c";
reg = <0x48060000 0x100>;
- interrupts = <0 61 0x4>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
i2c4: i2c@48350000 {
compatible = "ti,omap4-i2c";
reg = <0x48350000 0x100>;
- interrupts = <0 62 0x4>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
mcspi1: spi@48098000 {
compatible = "ti,omap4-mcspi";
reg = <0x48098000 0x200>;
- interrupts = <0 65 0x4>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi1";
mcspi2: spi@4809a000 {
compatible = "ti,omap4-mcspi";
reg = <0x4809a000 0x200>;
- interrupts = <0 66 0x4>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi2";
mcspi3: spi@480b8000 {
compatible = "ti,omap4-mcspi";
reg = <0x480b8000 0x200>;
- interrupts = <0 91 0x4>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi3";
mcspi4: spi@480ba000 {
compatible = "ti,omap4-mcspi";
reg = <0x480ba000 0x200>;
- interrupts = <0 48 0x4>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi4";
mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
- interrupts = <0 83 0x4>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480b4000 0x400>;
- interrupts = <0 86 0x4>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
dmas = <&sdma 47>, <&sdma 48>;
mmc3: mmc@480ad000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480ad000 0x400>;
- interrupts = <0 94 0x4>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
dmas = <&sdma 77>, <&sdma 78>;
mmc4: mmc@480d1000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480d1000 0x400>;
- interrupts = <0 96 0x4>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
dmas = <&sdma 57>, <&sdma 58>;
mmc5: mmc@480d5000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480d5000 0x400>;
- interrupts = <0 59 0x4>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc5";
ti,needs-special-reset;
dmas = <&sdma 59>, <&sdma 60>;
wdt2: wdt@4a314000 {
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
reg = <0x4a314000 0x80>;
- interrupts = <0 80 0x4>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "wd_timer2";
};
reg = <0x40132000 0x7f>, /* MPU private access */
<0x49032000 0x7f>; /* L3 Interconnect */
reg-names = "mpu", "dma";
- interrupts = <0 112 0x4>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mcpdm";
dmas = <&sdma 65>,
<&sdma 66>;
reg = <0x4012e000 0x7f>, /* MPU private access */
<0x4902e000 0x7f>; /* L3 Interconnect */
reg-names = "mpu", "dma";
- interrupts = <0 114 0x4>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "dmic";
dmas = <&sdma 67>;
dma-names = "up_link";
reg = <0x40122000 0xff>, /* MPU private access */
<0x49022000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
- interrupts = <0 17 0x4>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
reg = <0x40124000 0xff>, /* MPU private access */
<0x49024000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
- interrupts = <0 22 0x4>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp2";
reg = <0x40126000 0xff>, /* MPU private access */
<0x49026000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
- interrupts = <0 23 0x4>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3";
compatible = "ti,omap4-mcbsp";
reg = <0x48096000 0xff>; /* L4 Interconnect */
reg-names = "mpu";
- interrupts = <0 16 0x4>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp4";
keypad: keypad@4a31c000 {
compatible = "ti,omap4-keypad";
reg = <0x4a31c000 0x80>;
- interrupts = <0 120 0x4>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
reg-names = "mpu";
ti,hwmods = "kbd";
};
emif1: emif@4c000000 {
compatible = "ti,emif-4d";
reg = <0x4c000000 0x100>;
- interrupts = <0 110 0x4>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "emif1";
phy-type = <1>;
hw-caps-read-idle-ctrl;
emif2: emif@4d000000 {
compatible = "ti,emif-4d";
reg = <0x4d000000 0x100>;
- interrupts = <0 111 0x4>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "emif2";
phy-type = <1>;
hw-caps-read-idle-ctrl;
timer1: timer@4a318000 {
compatible = "ti,omap3430-timer";
reg = <0x4a318000 0x80>;
- interrupts = <0 37 0x4>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer1";
ti,timer-alwon;
};
timer2: timer@48032000 {
compatible = "ti,omap3430-timer";
reg = <0x48032000 0x80>;
- interrupts = <0 38 0x4>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer2";
};
timer3: timer@48034000 {
compatible = "ti,omap4430-timer";
reg = <0x48034000 0x80>;
- interrupts = <0 39 0x4>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer3";
};
timer4: timer@48036000 {
compatible = "ti,omap4430-timer";
reg = <0x48036000 0x80>;
- interrupts = <0 40 0x4>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer4";
};
compatible = "ti,omap4430-timer";
reg = <0x40138000 0x80>,
<0x49038000 0x80>;
- interrupts = <0 41 0x4>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer5";
ti,timer-dsp;
};
compatible = "ti,omap4430-timer";
reg = <0x4013a000 0x80>,
<0x4903a000 0x80>;
- interrupts = <0 42 0x4>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer6";
ti,timer-dsp;
};
compatible = "ti,omap4430-timer";
reg = <0x4013c000 0x80>,
<0x4903c000 0x80>;
- interrupts = <0 43 0x4>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer7";
ti,timer-dsp;
};
compatible = "ti,omap4430-timer";
reg = <0x4013e000 0x80>,
<0x4903e000 0x80>;
- interrupts = <0 44 0x4>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer8";
ti,timer-pwm;
ti,timer-dsp;
timer9: timer@4803e000 {
compatible = "ti,omap4430-timer";
reg = <0x4803e000 0x80>;
- interrupts = <0 45 0x4>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer9";
ti,timer-pwm;
};
timer10: timer@48086000 {
compatible = "ti,omap3430-timer";
reg = <0x48086000 0x80>;
- interrupts = <0 46 0x4>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer10";
ti,timer-pwm;
};
timer11: timer@48088000 {
compatible = "ti,omap4430-timer";
reg = <0x48088000 0x80>;
- interrupts = <0 47 0x4>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer11";
ti,timer-pwm;
};
usbhstll: usbhstll@4a062000 {
compatible = "ti,usbhs-tll";
reg = <0x4a062000 0x1000>;
- interrupts = <0 78 0x4>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "usb_tll_hs";
};
compatible = "ti,ohci-omap3", "usb-ohci";
reg = <0x4a064800 0x400>;
interrupt-parent = <&gic>;
- interrupts = <0 76 0x4>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
};
usbhsehci: ehci@4a064c00 {
compatible = "ti,ehci-omap", "usb-ehci";
reg = <0x4a064c00 0x400>;
interrupt-parent = <&gic>;
- interrupts = <0 77 0x4>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
};
};
usb_otg_hs: usb_otg_hs@4a0ab000 {
compatible = "ti,omap4-musb";
reg = <0x4a0ab000 0x7ff>;
- interrupts = <0 92 0x4>, <0 93 0x4>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc", "dma";
ti,hwmods = "usb_otg_hs";
usb-phy = <&usb2_phy>;
* kind, whether express or implied.
*/
-/include/ "omap4.dtsi"
+#include "omap4.dtsi"
/ {
cpus {
clock-latency = <300000>; /* From legacy driver */
};
};
+
+ bandgap {
+ reg = <0x4a002260 0x4
+ 0x4a00232C 0x4>;
+ compatible = "ti,omap4430-bandgap";
+ };
};
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
-/include/ "omap4.dtsi"
+#include "omap4.dtsi"
/ {
cpus {
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 54 0x4>,
- <0 55 0x4>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "debugss";
};
+
+ bandgap {
+ reg = <0x4a002260 0x4
+ 0x4a00232C 0x4
+ 0x4a002378 0x18>;
+ compatible = "ti,omap4460-bandgap";
+ interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
+ gpios = <&gpio3 22 0>; /* tshut */
+ };
};
+++ /dev/null
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "omap5.dtsi"
-/include/ "samsung_k3pe0e000b.dtsi"
-
-/ {
- model = "TI OMAP5 EVM board";
- compatible = "ti,omap5-evm", "ti,omap5";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x7F000000>; /* 2032 MB */
- };
-
- vmmcsd_fixed: fixedregulator-mmcsd {
- compatible = "regulator-fixed";
- regulator-name = "vmmcsd_fixed";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
-};
-
-&omap5_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <
- &twl6040_pins
- &mcpdm_pins
- &dmic_pins
- &mcbsp1_pins
- &mcbsp2_pins
- >;
-
- twl6040_pins: pinmux_twl6040_pins {
- pinctrl-single,pins = <
- 0x18a 0x6 /* perslimbus2_clock.gpio5_145 OUTPUT | MODE6 */
- >;
- };
-
- mcpdm_pins: pinmux_mcpdm_pins {
- pinctrl-single,pins = <
- 0x142 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
- 0x15c 0x108 /* abemcpdm_ul_data.abemcpdm_ul_data INPUT PULLDOWN | MODE0 */
- 0x15e 0x108 /* abemcpdm_dl_data.abemcpdm_dl_data INPUT PULLDOWN | MODE0 */
- 0x160 0x118 /* abemcpdm_frame.abemcpdm_frame INPUT PULLUP | MODE0 */
- 0x162 0x108 /* abemcpdm_lb_clk.abemcpdm_lb_clk INPUT PULLDOWN | MODE0 */
- >;
- };
-
- dmic_pins: pinmux_dmic_pins {
- pinctrl-single,pins = <
- 0x144 0x100 /* abedmic_din1.abedmic_din1 INPUT | MODE0 */
- 0x146 0x100 /* abedmic_din2.abedmic_din2 INPUT | MODE0 */
- 0x148 0x100 /* abedmic_din3.abedmic_din3 INPUT | MODE0 */
- 0x14a 0 /* abedmic_clk1.abedmic_clk1 OUTPUT | MODE0 */
- >;
- };
-
- mcbsp1_pins: pinmux_mcbsp1_pins {
- pinctrl-single,pins = <
- 0x14c 0x101 /* abedmic_clk2.abemcbsp1_fsx INPUT | MODE1 */
- 0x14e 0x9 /* abedmic_clk3.abemcbsp1_dx OUTPUT PULLDOWN | MODE1 */
- 0x150 0x101 /* abeslimbus1_clock.abemcbsp1_clkx INPUT | MODE0 */
- 0x152 0x109 /* abeslimbus1_data.abemcbsp1_dr INPUT PULLDOWN | MODE1 */
- >;
- };
-
- mcbsp2_pins: pinmux_mcbsp2_pins {
- pinctrl-single,pins = <
- 0x154 0x108 /* abemcbsp2_dr.abemcbsp2_dr INPUT PULLDOWN | MODE0 */
- 0x156 0x8 /* abemcbsp2_dx.abemcbsp2_dx OUTPUT PULLDOWN | MODE0 */
- 0x158 0x100 /* abemcbsp2_fsx.abemcbsp2_fsx INPUT | MODE0 */
- 0x15a 0x100 /* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */
- >;
- };
-
- i2c1_pins: pinmux_i2c1_pins {
- pinctrl-single,pins = <
- 0x1b2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
- 0x1b4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
- >;
- };
-
- i2c2_pins: pinmux_i2c2_pins {
- pinctrl-single,pins = <
- 0x178 0x100 /* i2c2_scl INPUTENABLE | MODE0 */
- 0x17a 0x100 /* i2c2_sda INPUTENABLE | MODE0 */
- >;
- };
-
- i2c3_pins: pinmux_i2c3_pins {
- pinctrl-single,pins = <
- 0x13a 0x100 /* i2c3_scl INPUTENABLE | MODE0 */
- 0x13c 0x100 /* i2c3_sda INPUTENABLE | MODE0 */
- >;
- };
-
- i2c4_pins: pinmux_i2c4_pins {
- pinctrl-single,pins = <
- 0xb8 0x100 /* i2c4_scl INPUTENABLE | MODE0 */
- 0xba 0x100 /* i2c4_sda INPUTENABLE | MODE0 */
- >;
- };
-
- i2c5_pins: pinmux_i2c5_pins {
- pinctrl-single,pins = <
- 0x184 0x100 /* i2c5_scl INPUTENABLE | MODE0 */
- 0x186 0x100 /* i2c5_sda INPUTENABLE | MODE0 */
- >;
- };
-
- mcspi2_pins: pinmux_mcspi2_pins {
- pinctrl-single,pins = <
- 0xbc 0x100 /* MCSPI2_CLK INPUTENABLE | MODE0 */
- 0xbe 0x100 /* MCSPI2_SIMO INPUTENABLE | MODE0 */
- 0xc0 0x118 /* MCSPI2_SOMI PULLUP | INPUTENABLE | MODE0*/
- 0xc2 0x0 /* MCSPI2_CS MODE0*/
- >;
- };
-
- mcspi3_pins: pinmux_mcspi3_pins {
- pinctrl-single,pins = <
- 0x78 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */
- 0x7a 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */
- 0x7c 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */
- 0x7e 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */
- >;
- };
-
- mcspi4_pins: pinmux_mcspi4_pins {
- pinctrl-single,pins = <
- 0x164 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */
- 0x168 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */
- 0x16a 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */
- 0x16c 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */
- >;
- };
-};
-
-&mmc1 {
- vmmc-supply = <&vmmcsd_fixed>;
- bus-width = <4>;
-};
-
-&mmc2 {
- vmmc-supply = <&vmmcsd_fixed>;
- bus-width = <8>;
- ti,non-removable;
-};
-
-&mmc3 {
- bus-width = <4>;
- ti,non-removable;
-};
-
-&mmc4 {
- status = "disabled";
-};
-
-&mmc5 {
- status = "disabled";
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-
- clock-frequency = <400000>;
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
-
- clock-frequency = <400000>;
-
- /* Pressure Sensor */
- bmp085@77 {
- compatible = "bosch,bmp085";
- reg = <0x77>;
- };
-};
-
-&i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins>;
-
- clock-frequency = <400000>;
-};
-
-&i2c4 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_pins>;
-
- clock-frequency = <400000>;
-
- /* Temperature Sensor */
- tmp102@48{
- compatible = "ti,tmp102";
- reg = <0x48>;
- };
-};
-
-&i2c5 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c5_pins>;
-
- clock-frequency = <400000>;
-};
-
-&keypad {
- keypad,num-rows = <8>;
- keypad,num-columns = <8>;
- linux,keymap = <0x02020073 /* VOLUP */
- 0x02030072 /* VOLDOWM */
- 0x020400e7 /* SEND */
- 0x02050066 /* HOME */
- 0x0206006b /* END */
- 0x020700d9>; /* SEARCH */
- linux,input-no-autorepeat;
-};
-
-&mcbsp3 {
- status = "disabled";
-};
-
-&emif1 {
- cs1-used;
- device-handle = <&samsung_K3PE0E000B>;
-};
-
-&emif2 {
- cs1-used;
- device-handle = <&samsung_K3PE0E000B>;
-};
-
-&mcspi1 {
-
-};
-
-&mcspi2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi2_pins>;
-};
-
-&mcspi3 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi3_pins>;
-};
-
-&mcspi4 {
- pinctrl-names = "default";
- pinctrl-0 = <&mcspi4_pins>;
-};
--- /dev/null
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "TI OMAP5 uEVM board";
+ compatible = "ti,omap5-uevm", "ti,omap5";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x7F000000>; /* 2032 MB */
+ };
+
+ vmmcsd_fixed: fixedregulator-mmcsd {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ /* HS USB Port 2 RESET */
+ hsusb2_reset: hsusb2_reset_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_reset";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2_phy {
+ compatible = "usb-nop-xceiv";
+ reset-supply = <&hsusb2_reset>;
+ /**
+ * FIXME
+ * Put the right clock phandle here when available
+ * clocks = <&auxclk1>;
+ * clock-names = "main_clk";
+ */
+ clock-frequency = <19200000>;
+ };
+
+ /* HS USB Port 3 RESET */
+ hsusb3_reset: hsusb3_reset_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb3_reset";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; /* gpio3_79 ETH_NRESET */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ /* HS USB Host PHY on PORT 3 */
+ hsusb3_phy: hsusb3_phy {
+ compatible = "usb-nop-xceiv";
+ reset-supply = <&hsusb3_reset>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led@1 {
+ label = "omap5:blue:usr1";
+ gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+};
+
+&omap5_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6040_pins
+ &mcpdm_pins
+ &dmic_pins
+ &mcbsp1_pins
+ &mcbsp2_pins
+ &usbhost_pins
+ &led_gpio_pins
+ >;
+
+ twl6040_pins: pinmux_twl6040_pins {
+ pinctrl-single,pins = <
+ 0x18a (PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */
+ >;
+ };
+
+ mcpdm_pins: pinmux_mcpdm_pins {
+ pinctrl-single,pins = <
+ 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
+ 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
+ 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
+ 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
+ 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
+ >;
+ };
+
+ dmic_pins: pinmux_dmic_pins {
+ pinctrl-single,pins = <
+ 0x144 (PIN_INPUT | MUX_MODE0) /* abedmic_din1.abedmic_din1 */
+ 0x146 (PIN_INPUT | MUX_MODE0) /* abedmic_din2.abedmic_din2 */
+ 0x148 (PIN_INPUT | MUX_MODE0) /* abedmic_din3.abedmic_din3 */
+ 0x14a (PIN_OUTPUT | MUX_MODE0) /* abedmic_clk1.abedmic_clk1 */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
+ 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
+ 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
+ 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
+ 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
+ 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
+ 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c5_pins: pinmux_i2c5_pins {
+ pinctrl-single,pins = <
+ 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
+ 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
+ >;
+ };
+
+ mcspi2_pins: pinmux_mcspi2_pins {
+ pinctrl-single,pins = <
+ 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
+ 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
+ 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
+ 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs */
+ >;
+ };
+
+ mcspi3_pins: pinmux_mcspi3_pins {
+ pinctrl-single,pins = <
+ 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */
+ 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */
+ 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */
+ 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */
+ >;
+ };
+
+ mcspi4_pins: pinmux_mcspi4_pins {
+ pinctrl-single,pins = <
+ 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */
+ 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */
+ 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */
+ 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */
+ >;
+ };
+
+ usbhost_pins: pinmux_usbhost_pins {
+ pinctrl-single,pins = <
+ 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+ 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+
+ 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+ 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+
+ 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
+ 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
+ >;
+ };
+
+ led_gpio_pins: pinmux_led_gpio_pins {
+ pinctrl-single,pins = <
+ 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
+ >;
+ };
+
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
+ 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
+ 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
+ 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
+ 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
+ >;
+ };
+
+ uart5_pins: pinmux_uart5_pins {
+ pinctrl-single,pins = <
+ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
+ 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
+ 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
+ 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
+ >;
+ };
+
+};
+
+&omap5_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &usbhost_wkup_pins
+ >;
+
+ usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
+ pinctrl-single,pins = <
+ 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
+ >;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ bus-width = <4>;
+ ti,non-removable;
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ status = "disabled";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ palmas: palmas@48 {
+ compatible = "ti,palmas";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+ interrupt-parent = <&gic>;
+ reg = <0x48>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ palmas_pmic {
+ compatible = "ti,palmas-pmic";
+ interrupt-parent = <&palmas>;
+ interrupts = <14 IRQ_TYPE_NONE>;
+ interrupt-name = "short-irq";
+
+ ti,ldo6-vibrator;
+
+ regulators {
+ smps123_reg: smps123 {
+ regulator-name = "smps123";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ regulator-name = "smps6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ regulator-name = "smps7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ regulator-name = "smps9";
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,smps-range = <0x80>;
+ };
+
+ smps10_reg: smps10 {
+ regulator-name = "smps10";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "ldo8";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+};
+
+&i2c5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&mcbsp3 {
+ status = "disabled";
+};
+
+&usbhshost {
+ port2-mode = "ehci-hsic";
+ port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi3_pins>;
+};
+
+&mcspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi4_pins>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_pins>;
+};
* Based on "omap4.dtsi"
*/
-/*
- * Carveout for multimedia usecases
- * It should be the last 48MB of the first 512MB memory part
- * In theory, it should not even exist. That zone should be reserved
- * dynamically during the .reserve callback.
- */
-/memreserve/ 0x9d000000 0x03000000;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
#address-cells = <1>;
};
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
cpu@0 {
+ device_type = "cpu";
compatible = "arm,cortex-a15";
+ reg = <0x0>;
};
cpu@1 {
+ device_type = "cpu";
compatible = "arm,cortex-a15";
+ reg = <0x1>;
};
};
timer {
compatible = "arm,armv7-timer";
- /* PPI secure/nonsecure IRQ, active low level-sensitive */
- interrupts = <1 13 0x308>,
- <1 14 0x308>,
- <1 11 0x308>,
- <1 10 0x308>;
+ /* PPI secure/nonsecure IRQ */
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
clock-frequency = <6144000>;
};
reg = <0x44000000 0x2000>,
<0x44800000 0x3000>,
<0x45000000 0x4000>;
- interrupts = <0 9 0x4>,
- <0 10 0x4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
counter32k: counter@4ae04000 {
compatible = "ti,omap-counter32k";
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
- interrupts = <0 12 0x4>,
- <0 13 0x4>,
- <0 14 0x4>,
- <0 15 0x4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <127>;
gpio1: gpio@4ae10000 {
compatible = "ti,omap4-gpio";
reg = <0x4ae10000 0x200>;
- interrupts = <0 29 0x4>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio1";
ti,gpio-always-on;
gpio-controller;
gpio2: gpio@48055000 {
compatible = "ti,omap4-gpio";
reg = <0x48055000 0x200>;
- interrupts = <0 30 0x4>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
gpio3: gpio@48057000 {
compatible = "ti,omap4-gpio";
reg = <0x48057000 0x200>;
- interrupts = <0 31 0x4>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
gpio4: gpio@48059000 {
compatible = "ti,omap4-gpio";
reg = <0x48059000 0x200>;
- interrupts = <0 32 0x4>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
gpio5: gpio@4805b000 {
compatible = "ti,omap4-gpio";
reg = <0x4805b000 0x200>;
- interrupts = <0 33 0x4>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
gpio6: gpio@4805d000 {
compatible = "ti,omap4-gpio";
reg = <0x4805d000 0x200>;
- interrupts = <0 34 0x4>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
gpio7: gpio@48051000 {
compatible = "ti,omap4-gpio";
reg = <0x48051000 0x200>;
- interrupts = <0 35 0x4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio7";
gpio-controller;
#gpio-cells = <2>;
gpio8: gpio@48053000 {
compatible = "ti,omap4-gpio";
reg = <0x48053000 0x200>;
- interrupts = <0 121 0x4>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio8";
gpio-controller;
#gpio-cells = <2>;
reg = <0x50000000 0x1000>;
#address-cells = <2>;
#size-cells = <1>;
- interrupts = <0 20 0x4>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
ti,hwmods = "gpmc";
i2c1: i2c@48070000 {
compatible = "ti,omap4-i2c";
reg = <0x48070000 0x100>;
- interrupts = <0 56 0x4>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
i2c2: i2c@48072000 {
compatible = "ti,omap4-i2c";
reg = <0x48072000 0x100>;
- interrupts = <0 57 0x4>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
i2c3: i2c@48060000 {
compatible = "ti,omap4-i2c";
reg = <0x48060000 0x100>;
- interrupts = <0 61 0x4>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
i2c4: i2c@4807a000 {
compatible = "ti,omap4-i2c";
reg = <0x4807a000 0x100>;
- interrupts = <0 62 0x4>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
i2c5: i2c@4807c000 {
compatible = "ti,omap4-i2c";
reg = <0x4807c000 0x100>;
- interrupts = <0 60 0x4>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c5";
mcspi1: spi@48098000 {
compatible = "ti,omap4-mcspi";
reg = <0x48098000 0x200>;
- interrupts = <0 65 0x4>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi1";
mcspi2: spi@4809a000 {
compatible = "ti,omap4-mcspi";
reg = <0x4809a000 0x200>;
- interrupts = <0 66 0x4>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi2";
mcspi3: spi@480b8000 {
compatible = "ti,omap4-mcspi";
reg = <0x480b8000 0x200>;
- interrupts = <0 91 0x4>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi3";
mcspi4: spi@480ba000 {
compatible = "ti,omap4-mcspi";
reg = <0x480ba000 0x200>;
- interrupts = <0 48 0x4>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi4";
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
- interrupts = <0 72 0x4>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts = <0 73 0x4>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts = <0 74 0x4>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts = <0 70 0x4>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
uart5: serial@48066000 {
compatible = "ti,omap4-uart";
reg = <0x48066000 0x100>;
- interrupts = <0 105 0x4>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
};
uart6: serial@48068000 {
compatible = "ti,omap4-uart";
reg = <0x48068000 0x100>;
- interrupts = <0 106 0x4>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
};
mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
- interrupts = <0 83 0x4>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480b4000 0x400>;
- interrupts = <0 86 0x4>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
dmas = <&sdma 47>, <&sdma 48>;
mmc3: mmc@480ad000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480ad000 0x400>;
- interrupts = <0 94 0x4>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
dmas = <&sdma 77>, <&sdma 78>;
mmc4: mmc@480d1000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480d1000 0x400>;
- interrupts = <0 96 0x4>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
dmas = <&sdma 57>, <&sdma 58>;
mmc5: mmc@480d5000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480d5000 0x400>;
- interrupts = <0 59 0x4>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc5";
ti,needs-special-reset;
dmas = <&sdma 59>, <&sdma 60>;
reg = <0x40132000 0x7f>, /* MPU private access */
<0x49032000 0x7f>; /* L3 Interconnect */
reg-names = "mpu", "dma";
- interrupts = <0 112 0x4>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mcpdm";
dmas = <&sdma 65>,
<&sdma 66>;
reg = <0x4012e000 0x7f>, /* MPU private access */
<0x4902e000 0x7f>; /* L3 Interconnect */
reg-names = "mpu", "dma";
- interrupts = <0 114 0x4>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "dmic";
dmas = <&sdma 67>;
dma-names = "up_link";
reg = <0x40122000 0xff>, /* MPU private access */
<0x49022000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
- interrupts = <0 17 0x4>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
reg = <0x40124000 0xff>, /* MPU private access */
<0x49024000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
- interrupts = <0 22 0x4>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp2";
reg = <0x40126000 0xff>, /* MPU private access */
<0x49026000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
- interrupts = <0 23 0x4>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3";
timer1: timer@4ae18000 {
compatible = "ti,omap5430-timer";
reg = <0x4ae18000 0x80>;
- interrupts = <0 37 0x4>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer1";
ti,timer-alwon;
};
timer2: timer@48032000 {
compatible = "ti,omap5430-timer";
reg = <0x48032000 0x80>;
- interrupts = <0 38 0x4>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer2";
};
timer3: timer@48034000 {
compatible = "ti,omap5430-timer";
reg = <0x48034000 0x80>;
- interrupts = <0 39 0x4>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer3";
};
timer4: timer@48036000 {
compatible = "ti,omap5430-timer";
reg = <0x48036000 0x80>;
- interrupts = <0 40 0x4>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer4";
};
compatible = "ti,omap5430-timer";
reg = <0x40138000 0x80>,
<0x49038000 0x80>;
- interrupts = <0 41 0x4>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer5";
ti,timer-dsp;
ti,timer-pwm;
compatible = "ti,omap5430-timer";
reg = <0x4013a000 0x80>,
<0x4903a000 0x80>;
- interrupts = <0 42 0x4>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer6";
ti,timer-dsp;
ti,timer-pwm;
compatible = "ti,omap5430-timer";
reg = <0x4013c000 0x80>,
<0x4903c000 0x80>;
- interrupts = <0 43 0x4>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer7";
ti,timer-dsp;
};
compatible = "ti,omap5430-timer";
reg = <0x4013e000 0x80>,
<0x4903e000 0x80>;
- interrupts = <0 44 0x4>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer8";
ti,timer-dsp;
ti,timer-pwm;
timer9: timer@4803e000 {
compatible = "ti,omap5430-timer";
reg = <0x4803e000 0x80>;
- interrupts = <0 45 0x4>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer9";
ti,timer-pwm;
};
timer10: timer@48086000 {
compatible = "ti,omap5430-timer";
reg = <0x48086000 0x80>;
- interrupts = <0 46 0x4>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer10";
ti,timer-pwm;
};
timer11: timer@48088000 {
compatible = "ti,omap5430-timer";
reg = <0x48088000 0x80>;
- interrupts = <0 47 0x4>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer11";
ti,timer-pwm;
};
wdt2: wdt@4ae14000 {
compatible = "ti,omap5-wdt", "ti,omap3-wdt";
reg = <0x4ae14000 0x80>;
- interrupts = <0 80 0x4>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "wd_timer2";
};
ti,hwmods = "emif1";
phy-type = <2>; /* DDR PHY type: Intelli PHY */
reg = <0x4c000000 0x400>;
- interrupts = <0 110 0x4>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
hw-caps-read-idle-ctrl;
hw-caps-ll-interface;
hw-caps-temp-alert;
ti,hwmods = "emif2";
phy-type = <2>; /* DDR PHY type: Intelli PHY */
reg = <0x4d000000 0x400>;
- interrupts = <0 111 0x4>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
hw-caps-read-idle-ctrl;
hw-caps-ll-interface;
hw-caps-temp-alert;
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss";
reg = <0x4a020000 0x1000>;
- interrupts = <0 93 4>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
utmi-mode = <2>;
dwc3@4a030000 {
compatible = "synopsys,dwc3";
reg = <0x4a030000 0x1000>;
- interrupts = <0 92 4>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
usb-phy = <&usb2_phy>, <&usb3_phy>;
tx-fifo-resize;
};
ctrl-module = <&omap_control_usb>;
};
};
+
+ usbhstll: usbhstll@4a062000 {
+ compatible = "ti,usbhs-tll";
+ reg = <0x4a062000 0x1000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "usb_tll_hs";
+ };
+
+ usbhshost: usbhshost@4a064000 {
+ compatible = "ti,usbhs-host";
+ reg = <0x4a064000 0x800>;
+ ti,hwmods = "usb_host_hs";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbhsohci: ohci@4a064800 {
+ compatible = "ti,ohci-omap3", "usb-ohci";
+ reg = <0x4a064800 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usbhsehci: ehci@4a064c00 {
+ compatible = "ti,ehci-omap", "usb-ehci";
+ reg = <0x4a064c00 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ bandgap@4a0021e0 {
+ reg = <0x4a0021e0 0xc
+ 0x4a00232c 0xc
+ 0x4a002380 0x2c
+ 0x4a0023C0 0x3c>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ compatible = "ti,omap5430-bandgap";
+ };
};
};
#size-cells = <1>;
cpus {
- #address-cells = <1>;
+ #address-cells = <0>;
#size-cells = <0>;
- cpu@0 {
- compatible = "arm,1176jz-s";
+ cpu {
+ compatible = "arm,arm1176jz-s";
+ device_type = "cpu";
clock-frequency = <400000000>;
- reg = <0>;
d-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-line-size = <32>;
#size-cells = <1>;
cpus {
- #address-cells = <1>;
+ #address-cells = <0>;
#size-cells = <0>;
- cpu@0 {
- compatible = "arm,1176jz-s";
+ cpu {
+ compatible = "arm,arm1176jz-s";
+ device_type = "cpu";
cpu-clock = <&arm_clk>, "cpu";
- reg = <0>;
d-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-line-size = <32>;
#size-cells = <0>;
cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
};
cpus {
- cpu@0 {
- compatible = "arm,xscale";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ cpu {
+ compatible = "marvell,xscale";
+ device_type = "cpu";
};
};
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <1 9 0xf04>;
-
- gic-cpuif@4 {
- compatible = "arm,gic-cpuif";
- cpuif-id = <4>;
- cpu = <&cpu0>;
- };
};
timer {
--- /dev/null
+/*
+ * Reference Device Tree Source for the armadillo 800 eva board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7740.dtsi"
+
+/ {
+ model = "armadillo 800 eva reference";
+ compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
+
+ chosen {
+ bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x20000000>;
+ };
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+};
+
+&i2c0 {
+ touchscreen: st1232@55 {
+ compatible = "sitronix,st1232";
+ reg = <0x55>;
+ interrupt-parent = <&irqpin1>;
+ interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
+ };
+};
compatible = "renesas,r8a7740";
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0x0>;
};
};
+
+ gic: interrupt-controller@c2800000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0xc2800000 0x1000>,
+ <0xc2000000 0x1000>;
+ };
+
+ /* irqpin0: IRQ0 - IRQ7 */
+ irqpin0: irqpin@e6900000 {
+ compatible = "renesas,intc-irqpin";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xe6900000 4>,
+ <0xe6900010 4>,
+ <0xe6900020 1>,
+ <0xe6900040 1>,
+ <0xe6900060 1>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4>;
+ };
+
+ /* irqpin1: IRQ8 - IRQ15 */
+ irqpin1: irqpin@e6900004 {
+ compatible = "renesas,intc-irqpin";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xe6900004 4>,
+ <0xe6900014 4>,
+ <0xe6900024 1>,
+ <0xe6900044 1>,
+ <0xe6900064 1>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4>;
+ };
+
+ /* irqpin2: IRQ16 - IRQ23 */
+ irqpin2: irqpin@e6900008 {
+ compatible = "renesas,intc-irqpin";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xe6900008 4>,
+ <0xe6900018 4>,
+ <0xe6900028 1>,
+ <0xe6900048 1>,
+ <0xe6900068 1>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4>;
+ };
+
+ /* irqpin3: IRQ24 - IRQ31 */
+ irqpin3: irqpin@e690000c {
+ compatible = "renesas,intc-irqpin";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xe690000c 4>,
+ <0xe690001c 4>,
+ <0xe690002c 1>,
+ <0xe690004c 1>,
+ <0xe690006c 1>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4
+ 0 149 0x4>;
+ };
+
+ i2c0: i2c@fff20000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0xfff20000 0x425>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 201 0x4
+ 0 202 0x4
+ 0 203 0x4
+ 0 204 0x4>;
+ };
+
+ i2c1: i2c@e6c20000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0xe6c20000 0x425>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 70 0x4
+ 0 71 0x4
+ 0 72 0x4
+ 0 73 0x4>;
+ };
};
<0xf0000100 0x100>;
};
+ irqpin0: irqpin@fe780010 {
+ compatible = "renesas,intc-irqpin";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xfe78001c 4>,
+ <0xfe780010 4>,
+ <0xfe780024 4>,
+ <0xfe780044 4>,
+ <0xfe780064 4>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 27 0x4
+ 0 28 0x4
+ 0 29 0x4
+ 0 30 0x4>;
+ sense-bitfield-width = <2>;
+ };
+
i2c0: i2c@0xffc70000 {
#address-cells = <1>;
#size-cells = <0>;
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <1 9 0xf04>;
-
- gic-cpuif@4 {
- compatible = "arm,gic-cpuif";
- cpuif-id = <4>;
- cpu = <&cpu0>;
- };
};
timer {
--- /dev/null
+/*
+ * Samsung S3C2416 pinctrl settings
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&pinctrl_0 {
+ /*
+ * Pin banks
+ */
+
+ gpa: gpa {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpb: gpb {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpc: gpc {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpd: gpd {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpe: gpe {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpf: gpf {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg: gpg {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph: gph {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpj: gpj {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpk: gpk {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpl: gpl {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpm: gpm {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ /*
+ * Pin groups
+ */
+
+ uart0_data: uart0-data {
+ samsung,pins = "gph-0", "gph-1";
+ samsung,pin-function = <2>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gph-8", "gph-9";
+ samsung,pin-function = <2>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gph-2", "gph-3";
+ samsung,pin-function = <2>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gph-10", "gph-11";
+ samsung,pin-function = <2>;
+ };
+
+ uart2_data: uart2-data {
+ samsung,pins = "gph-4", "gph-5";
+ samsung,pin-function = <2>;
+ };
+
+ uart2_fctl: uart2-fctl {
+ samsung,pins = "gph-6", "gph-7";
+ samsung,pin-function = <2>;
+ };
+
+ uart3_data: uart3-data {
+ samsung,pins = "gph-6", "gph-7";
+ samsung,pin-function = <2>;
+ };
+
+ extuart_clk: extuart-clk {
+ samsung,pins = "gph-12";
+ samsung,pin-function = <2>;
+ };
+
+ i2c0_bus: i2c0-bus {
+ samsung,pins = "gpe-14", "gpe-15";
+ samsung,pin-function = <2>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpe-11", "gpe-12", "gpe-13";
+ samsung,pin-function = <2>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpe-5";
+ samsung,pin-function = <2>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpe-6";
+ samsung,pin-function = <2>;
+ };
+
+ sd0_bus1: sd0-bus1 {
+ samsung,pins = "gpe-7";
+ samsung,pin-function = <2>;
+ };
+
+ sd0_bus4: sd0-bus4 {
+ samsung,pins = "gpe-8", "gpe-9", "gpe-10";
+ samsung,pin-function = <2>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpl-8";
+ samsung,pin-function = <2>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpl-9";
+ samsung,pin-function = <2>;
+ };
+
+ sd1_bus1: sd1-bus1 {
+ samsung,pins = "gpl-0";
+ samsung,pin-function = <2>;
+ };
+
+ sd1_bus4: sd1-bus4 {
+ samsung,pins = "gpl-1", "gpl-2", "gpl-3";
+ samsung,pin-function = <2>;
+ };
+};
--- /dev/null
+/*
+ * SAMSUNG SMDK2416 board device tree source
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "s3c2416.dtsi"
+
+/ {
+ model = "SMDK2416";
+ compatible = "samsung,s3c2416";
+
+ memory {
+ reg = <0x30000000 0x4000000>;
+ };
+
+ serial@50000000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+ };
+
+ serial@50004000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
+ };
+
+ serial@50008000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_data>;
+ };
+
+ serial@5000C000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_data>;
+ };
+
+ watchdog@53000000 {
+ status = "okay";
+ };
+
+ rtc@57000000 {
+ status = "okay";
+ };
+
+ sdhci@4AC00000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
+ <&sd0_bus1>, <&sd0_bus4>;
+ bus-width = <4>;
+ cd-gpios = <&gpf 1 0>;
+ cd-inverted;
+ status = "okay";
+ };
+
+ sdhci@4A800000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
+ <&sd1_bus1>, <&sd1_bus4>;
+ bus-width = <4>;
+ broken-cd;
+ status = "okay";
+ };
+};
--- /dev/null
+/*
+ * Samsung's S3C2416 SoC device tree source
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "s3c24xx.dtsi"
+/include/ "s3c2416-pinctrl.dtsi"
+
+/ {
+ model = "Samsung S3C2416 SoC";
+ compatible = "samsung,s3c2416";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ interrupt-controller@4a000000 {
+ compatible = "samsung,s3c2416-irq";
+ };
+
+ pinctrl@56000000 {
+ compatible = "samsung,s3c2416-pinctrl";
+ };
+
+ serial@50000000 {
+ compatible = "samsung,s3c2440-uart";
+ };
+
+ serial@50004000 {
+ compatible = "samsung,s3c2440-uart";
+ };
+
+ serial@50008000 {
+ compatible = "samsung,s3c2440-uart";
+ };
+
+ serial@5000C000 {
+ compatible = "samsung,s3c2440-uart";
+ reg = <0x5000C000 0x4000>;
+ interrupts = <1 18 24 4>, <1 18 25 4>;
+ status = "disabled";
+ };
+
+ sdhci@4AC00000 {
+ compatible = "samsung,s3c6410-sdhci";
+ reg = <0x4AC00000 0x100>;
+ interrupts = <0 0 21 3>;
+ status = "disabled";
+ };
+
+ sdhci@4A800000 {
+ compatible = "samsung,s3c6410-sdhci";
+ reg = <0x4A800000 0x100>;
+ interrupts = <0 0 20 3>;
+ status = "disabled";
+ };
+
+ watchdog@53000000 {
+ interrupts = <1 9 27 3>;
+ };
+
+ rtc@57000000 {
+ compatible = "samsung,s3c2416-rtc";
+ };
+
+ i2c@54000000 {
+ compatible = "samsung,s3c2440-i2c";
+ };
+};
--- /dev/null
+/*
+ * Samsung's S3C24XX family device tree source
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "samsung,s3c24xx";
+ interrupt-parent = <&intc>;
+
+ aliases {
+ pinctrl0 = &pinctrl_0;
+ };
+
+ intc:interrupt-controller@4a000000 {
+ compatible = "samsung,s3c2410-irq";
+ reg = <0x4a000000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ pinctrl_0: pinctrl@56000000 {
+ reg = <0x56000000 0x1000>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,s3c2410-wakeup-eint";
+ interrupts = <0 0 0 3>,
+ <0 0 1 3>,
+ <0 0 2 3>,
+ <0 0 3 3>,
+ <0 0 4 4>,
+ <0 0 5 4>;
+ };
+ };
+
+ timer@51000000 {
+ compatible = "samsung,s3c2410-pwm";
+ reg = <0x51000000 0x1000>;
+ interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
+ #pwm-cells = <4>;
+ };
+
+ serial@50000000 {
+ compatible = "samsung,s3c2410-uart";
+ reg = <0x50000000 0x4000>;
+ interrupts = <1 28 0 4>, <1 28 1 4>;
+ status = "disabled";
+ };
+
+ serial@50004000 {
+ compatible = "samsung,s3c2410-uart";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1 23 3 4>, <1 23 4 4>;
+ status = "disabled";
+ };
+
+ serial@50008000 {
+ compatible = "samsung,s3c2410-uart";
+ reg = <0x50008000 0x4000>;
+ interrupts = <1 15 6 4>, <1 15 7 4>;
+ status = "disabled";
+ };
+
+ watchdog@53000000 {
+ compatible = "samsung,s3c2410-wdt";
+ reg = <0x53000000 0x100>;
+ interrupts = <0 0 9 3>;
+ status = "disabled";
+ };
+
+ rtc@57000000 {
+ compatible = "samsung,s3c2410-rtc";
+ reg = <0x57000000 0x100>;
+ interrupts = <0 0 30 3>, <0 0 8 3>;
+ status = "disabled";
+ };
+
+ i2c@54000000 {
+ compatible = "samsung,s3c2410-i2c";
+ reg = <0x54000000 0x100>;
+ interrupts = <0 0 27 3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+};
*/
#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
ssc1 = &ssc1;
};
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
+ device_type = "cpu";
compatible = "arm,cortex-a5";
+ reg = <0x0>;
};
};
compatible = "atmel,hsmci";
reg = <0xf0000000 0x600>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma0 2 0>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
spi0: spi@f0004000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "atmel,at91sam9x5-spi";
+ compatible = "atmel,at91rm9200-spi";
reg = <0xf0004000 0x100>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>,
+ <&dma0 2 AT91_DMA_CFG_PER_ID(2)>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf0014000 0x4000>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
- dmas = <&dma0 2 7>,
- <&dma0 2 8>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
+ <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf0018000 0x4000>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
- dmas = <&dma0 2 9>,
- <&dma0 2 10>;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
+ <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
compatible = "atmel,hsmci";
reg = <0xf8000000 0x600>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma1 2 0>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
compatible = "atmel,hsmci";
reg = <0xf8004000 0x600>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma1 2 1>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
spi1: spi@f8008000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "atmel,at91sam9x5-spi";
+ compatible = "atmel,at91rm9200-spi";
reg = <0xf8008000 0x100>;
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>,
+ <&dma1 2 AT91_DMA_CFG_PER_ID(16)>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf801c000 0x4000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
- dmas = <&dma1 2 11>,
- <&dma1 2 12>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
+ <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,sh7372";
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
cpu@0 {
compatible = "arm,cortex-a8";
+ device_type = "cpu";
+ reg = <0x0>;
};
};
};
model = "KZM-A9-GT";
compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd_dvfs>;
+ operating-points = <
+ /* kHz uV */
+ 1196000 1315000
+ 598000 1175000
+ 398667 1065000
+ >;
+ voltage-tolerance = <1>; /* 1% */
+ };
+ };
+
chosen {
bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200";
};
};
};
+&i2c0 {
+ as3711@40 {
+ compatible = "ams,as3711";
+ reg = <0x40>;
+
+ regulators {
+ vdd_dvfs: sd1 {
+ regulator-name = "1.315V CPU";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sd2 {
+ regulator-name = "1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ sd4 {
+ regulator-name = "1.215V";
+ regulator-min-microvolt = <1215000>;
+ regulator-max-microvolt = <1235000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo2 {
+ regulator-name = "2.8V CPU";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo3 {
+ regulator-name = "3.0V CPU";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo4 {
+ regulator-name = "2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo5 {
+ regulator-name = "2.8V #2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo7 {
+ regulator-name = "1.15V CPU";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo8 {
+ regulator-name = "1.15V CPU #2";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
&mmcif {
bus-width = <8>;
vmmc-supply = <®_1p8v>;
0 32 0x4>;
};
- i2c0: i2c@0xe6820000 {
+ i2c0: i2c@e6820000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
0 170 0x4>;
};
- i2c1: i2c@0xe6822000 {
+ i2c1: i2c@e6822000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
0 54 0x4>;
};
- i2c2: i2c@0xe6824000 {
+ i2c2: i2c@e6824000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
0 174 0x4>;
};
- i2c3: i2c@0xe6826000 {
+ i2c3: i2c@e6826000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
0 186 0x4>;
};
- i2c4: i2c@0xe6828000 {
+ i2c4: i2c@e6828000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
0 190 0x4>;
};
- mmcif: mmcif@0x10010000 {
+ mmcif: mmcif@e6bd0000 {
compatible = "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
interrupt-parent = <&gic>;
status = "disabled";
};
- sdhi0: sdhi@0xee100000 {
+ sdhi0: sdhi@ee100000 {
compatible = "renesas,r8a7740-sdhi";
reg = <0xee100000 0x100>;
interrupt-parent = <&gic>;
};
/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
- sdhi1: sdhi@0xee120000 {
+ sdhi1: sdhi@ee120000 {
compatible = "renesas,r8a7740-sdhi";
reg = <0xee120000 0x100>;
interrupt-parent = <&gic>;
status = "disabled";
};
- sdhi2: sdhi@0xee140000 {
+ sdhi2: sdhi@ee140000 {
compatible = "renesas,r8a7740-sdhi";
reg = <0xee140000 0x100>;
interrupt-parent = <&gic>;
*/
/dts-v1/;
-/include/ "dbx5x0.dtsi"
+#include "dbx5x0.dtsi"
/ {
model = "Calao Systems Snowball platform with device tree";
};
};
- soc-u9500 {
+ soc {
sound {
compatible = "stericsson,snd-soc-mop500";
status = "okay";
};
- prcmu@80157000 {
- thermal@801573c0 {
- num-trips = <4>;
-
- trip0-temp = <70000>;
- trip0-type = "active";
- trip0-cdev-num = <1>;
- trip0-cdev-name0 = "thermal-cpufreq-0";
-
- trip1-temp = <75000>;
- trip1-type = "active";
- trip1-cdev-num = <1>;
- trip1-cdev-name0 = "thermal-cpufreq-0";
-
- trip2-temp = <80000>;
- trip2-type = "active";
- trip2-cdev-num = <1>;
- trip2-cdev-name0 = "thermal-cpufreq-0";
-
- trip3-temp = <85000>;
- trip3-type = "critical";
- trip3-cdev-num = <0>;
-
- status = "okay";
- };
- };
-
external-bus@50000000 {
status = "okay";
ethernet@0 {
compatible = "smsc,lan9115";
reg = <0 0x10000>;
- interrupts = <12 0x1>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gpio4>;
vdd33a-supply = <&en_3v3_reg>;
vddvario-supply = <&db8500_vape_reg>;
};
};
+ vmmci: regulator-gpio {
+ gpios = <&gpio6 25 0x4>;
+ enable-gpio = <&gpio7 4 0x4>;
+
+ status = "okay";
+ };
+
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <4>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
+ vqmmc-supply = <&vmmci>;
cd-gpios = <&gpio6 26 0x4>; // 218
cd-inverted;
// On-board eMMC
sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
};
i2c@80128000 {
- lp5521@0x33 {
+ lp5521@33 {
// compatible = "lp5521";
reg = <0x33>;
};
- lp5521@0x34 {
+ lp5521@34 {
// compatible = "lp5521";
reg = <0x34>;
};
- bh1780@0x29 {
+ bh1780@29 {
// compatible = "rohm,bh1780gli";
reg = <0x33>;
};
};
};
+ thermal@801573c0 {
+ num-trips = <4>;
+
+ trip0-temp = <70000>;
+ trip0-type = "active";
+ trip0-cdev-num = <1>;
+ trip0-cdev-name0 = "thermal-cpufreq-0";
+
+ trip1-temp = <75000>;
+ trip1-type = "active";
+ trip1-cdev-num = <1>;
+ trip1-cdev-name0 = "thermal-cpufreq-0";
+
+ trip2-temp = <80000>;
+ trip2-type = "active";
+ trip2-cdev-num = <1>;
+ trip2-cdev-name0 = "thermal-cpufreq-0";
+
+ trip3-temp = <85000>;
+ trip3-type = "critical";
+ trip3-cdev-num = <0>;
+
+ status = "okay";
+ };
+
ab8500 {
ab8500-gpio {
compatible = "stericsson,ab8500-gpio";
regulator-name = "V-MMC-SD";
};
- ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
regulator-name = "V-INTCORE";
};
regulator-name = "V-AMIC1";
};
- ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
regulator-name = "V-AMIC2";
};
aliases {
ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
serial0 = &uart0;
serial1 = &uart1;
timer0 = &timer0;
compatible = "fixed-clock";
};
+ f2s_periph_ref_clk: f2s_periph_ref_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <10000000>;
+ };
+
main_pll: main_pll {
#address-cells = <1>;
#size-cells = <0>;
reg = <0xD4>;
};
};
+
+ mpu_periph_clk: mpu_periph_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mpuclk>;
+ fixed-divider = <4>;
+ };
+
+ mpu_l2_ram_clk: mpu_l2_ram_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mpuclk>;
+ fixed-divider = <2>;
+ };
+
+ l4_main_clk: l4_main_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>;
+ clk-gate = <0x60 0>;
+ };
+
+ l3_main_clk: l3_main_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>;
+ };
+
+ l3_mp_clk: l3_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>;
+ div-reg = <0x64 0 2>;
+ clk-gate = <0x60 1>;
+ };
+
+ l3_sp_clk: l3_sp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>;
+ div-reg = <0x64 2 2>;
+ };
+
+ l4_mp_clk: l4_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>, <&per_base_clk>;
+ div-reg = <0x64 4 3>;
+ clk-gate = <0x60 2>;
+ };
+
+ l4_sp_clk: l4_sp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>, <&per_base_clk>;
+ div-reg = <0x64 7 3>;
+ clk-gate = <0x60 3>;
+ };
+
+ dbg_at_clk: dbg_at_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ div-reg = <0x68 0 2>;
+ clk-gate = <0x60 4>;
+ };
+
+ dbg_clk: dbg_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ div-reg = <0x68 2 2>;
+ clk-gate = <0x60 5>;
+ };
+
+ dbg_trace_clk: dbg_trace_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ div-reg = <0x6C 0 3>;
+ clk-gate = <0x60 6>;
+ };
+
+ dbg_timer_clk: dbg_timer_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ clk-gate = <0x60 7>;
+ };
+
+ cfg_clk: cfg_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&cfg_s2f_usr0_clk>;
+ clk-gate = <0x60 8>;
+ };
+
+ s2f_user0_clk: s2f_user0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&cfg_s2f_usr0_clk>;
+ clk-gate = <0x60 9>;
+ };
+
+ emac_0_clk: emac_0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&emac0_clk>;
+ clk-gate = <0xa0 0>;
+ };
+
+ emac_1_clk: emac_1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&emac1_clk>;
+ clk-gate = <0xa0 1>;
+ };
+
+ usb_mp_clk: usb_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 2>;
+ div-reg = <0xa4 0 3>;
+ };
+
+ spi_m_clk: spi_m_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 3>;
+ div-reg = <0xa4 3 3>;
+ };
+
+ can0_clk: can0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 4>;
+ div-reg = <0xa4 6 3>;
+ };
+
+ can1_clk: can1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 5>;
+ div-reg = <0xa4 9 3>;
+ };
+
+ gpio_db_clk: gpio_db_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 6>;
+ div-reg = <0xa8 0 24>;
+ };
+
+ s2f_user1_clk: s2f_user1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&s2f_usr1_clk>;
+ clk-gate = <0xa0 7>;
+ };
+
+ sdmmc_clk: sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+ clk-gate = <0xa0 8>;
+ };
+
+ nand_x_clk: nand_x_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+ clk-gate = <0xa0 9>;
+ };
+
+ nand_clk: nand_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+ clk-gate = <0xa0 10>;
+ fixed-divider = <4>;
+ };
+
+ qspi_clk: qspi_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
+ clk-gate = <0xa0 11>;
+ };
};
};
- gmac0: stmmac@ff700000 {
+ gmac0: ethernet@ff700000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
reg = <0xff700000 0x2000>;
interrupts = <0 115 4>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
- phy-mode = "gmii";
+ clocks = <&emac0_clk>;
+ clock-names = "stmmaceth";
+ status = "disabled";
+ };
+
+ gmac1: ethernet@ff702000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+ reg = <0xff702000 0x2000>;
+ interrupts = <0 120 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+ clocks = <&emac1_clk>;
+ clock-names = "stmmaceth";
+ status = "disabled";
};
L2: l2-cache@fffef000 {
reg = <0x0 0x40000000>; /* 1GB */
};
+ aliases {
+ /* this allow the ethaddr uboot environmnet variable contents
+ * to be added to the gmac1 device tree blob.
+ */
+ ethernet0 = &gmac1;
+ };
+
soc {
clkmgr@ffd04000 {
clocks {
};
};
+ ethernet@ff702000 {
+ phy-mode = "rgmii";
+ phy-addr = <0xffffffff>; /* probe for phy addr */
+ status = "okay";
+ };
+
timer0@ffc08000 {
clock-frequency = <100000000>;
};
};
};
+ ethernet@ff700000 {
+ phy-mode = "gmii";
+ status = "okay";
+ };
+
timer0@ffc08000 {
clock-frequency = <7000000>;
};
cpu@0 {
compatible = "arm,cortex-a9";
+ device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
};
cpu@1 {
compatible = "arm,cortex-a9";
+ device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
};
interrupt-parent = <&vic>;
cpus {
- cpu@0 {
- compatible = "arm,arm926ejs";
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
};
};
compatible = "st,spear600";
cpus {
- cpu@0 {
- compatible = "arm,arm926ejs";
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
};
};
};
};
+ src@101e0000 {
+ /* These chrystal drivers are not used on this board */
+ disable-sxtalo;
+ disable-mxtalo;
+ };
+
+ pinctrl {
+ /* Hog CD pins */
+ pinctrl-names = "default";
+ pinctrl-0 = <&cd_default_mode>;
+
+ mmcsd-cd {
+ cd_default_mode: cd_default {
+ cd_default_cfg1 {
+ /* CD input GPIO */
+ ste,pins = "GPIO111_H21";
+ ste,input = <0>;
+ };
+ cd_default_cfg2 {
+ /* CD GPIO biasing */
+ ste,pins = "GPIO112_J21";
+ ste,output = <0>;
+ };
+ };
+ };
+ user-led {
+ user_led_default_mode: user_led_default {
+ user_led_default_cfg {
+ ste,pins = "GPIO2_C5";
+ ste,output = <1>;
+ };
+ };
+ };
+ user-button {
+ user_button_default_mode: user_button_default {
+ user_button_default_cfg {
+ ste,pins = "GPIO3_A4";
+ ste,input = <0>;
+ };
+ };
+ };
+ };
+
/* Custom board node with GPIO pins to active etc */
usb-s8815 {
/* The S8815 is using this very GPIO pin for the SMSC91x IRQs */
gpios = <&gpio3 16 0x1>;
};
};
+
+ /* The user LED on the board is set up to be used for heartbeat */
+ leds {
+ compatible = "gpio-leds";
+ user-led {
+ label = "user_led";
+ gpios = <&gpio0 2 0x1>;
+ default-state = "off";
+ linux,default-trigger = "heartbeat";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_led_default_mode>;
+ };
+ };
+
+ /* User key mapped in as "escape" */
+ gpio-keys {
+ compatible = "gpio-keys";
+ user-button {
+ label = "user_button";
+ gpios = <&gpio0 3 0x1>;
+ linux,code = <1>; /* KEY_ESC */
+ gpio-key,wakeup;
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_button_default_mode>;
+ };
+ };
};
cache-level = <2>;
};
- mtu0 {
+ mtu0: mtu@101e2000 {
/* Nomadik system timer */
+ compatible = "st,nomadik-mtu";
reg = <0x101e2000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <4>;
+ clocks = <&timclk>, <&pclk>;
+ clock-names = "timclk", "apb_pclk";
};
- mtu1 {
+ mtu1: mtu@101e3000 {
/* Secondary timer */
reg = <0x101e3000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <5>;
+ clocks = <&timclk>, <&pclk>;
+ clock-names = "timclk", "apb_pclk";
};
gpio0: gpio@101e4000 {
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <0>;
+ clocks = <&pclk>;
};
gpio1: gpio@101e5000 {
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <1>;
+ clocks = <&pclk>;
};
gpio2: gpio@101e6000 {
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <2>;
+ clocks = <&pclk>;
};
gpio3: gpio@101e7000 {
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <3>;
+ clocks = <&pclk>;
};
pinctrl {
- compatible = "stericsson,nmk-pinctrl-stn8815";
+ compatible = "stericsson,stn8815-pinctrl";
+ /* Pin configurations */
+ uart0 {
+ uart0_default_mux: uart0_mux {
+ u0_default_mux {
+ ste,function = "u0";
+ ste,pins = "u0_a_1";
+ };
+ };
+ };
+ uart1 {
+ uart1_default_mux: uart1_mux {
+ u1_default_mux {
+ ste,function = "u1";
+ ste,pins = "u1_a_1";
+ };
+ };
+ };
+ mmcsd {
+ mmcsd_default_mux: mmcsd_mux {
+ mmcsd_default_mux {
+ ste,function = "mmcsd";
+ ste,pins = "mmcsd_a_1";
+ };
+ };
+ mmcsd_default_mode: mmcsd_default {
+ mmcsd_default_cfg1 {
+ /* MCCLK */
+ ste,pins = "GPIO8_B10";
+ ste,output = <0>;
+ };
+ mmcsd_default_cfg2 {
+ /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */
+ ste,pins = "GPIO10_C11", "GPIO15_A12",
+ "GPIO16_C13";
+ ste,output = <1>;
+ };
+ mmcsd_default_cfg3 {
+ /* MCCMD, MCDAT3-0, MCMSFBCLK */
+ ste,pins = "GPIO9_A10", "GPIO11_B11",
+ "GPIO12_A11", "GPIO13_C12",
+ "GPIO14_B12", "GPIO24_C15";
+ ste,input = <1>;
+ };
+ };
+ };
+ i2c0 {
+ i2c0_default_mode: i2c0_default {
+ i2c0_default_cfg {
+ ste,pins = "GPIO62_D3", "GPIO63_D2";
+ ste,input = <1>;
+ };
+ };
+ };
+ i2c1 {
+ i2c1_default_mode: i2c1_default {
+ i2c1_default_cfg {
+ ste,pins = "GPIO53_L4", "GPIO54_L3";
+ ste,input = <1>;
+ };
+ };
+ };
+ i2c2 {
+ i2c2_default_mode: i2c2_default {
+ i2c2_default_cfg {
+ ste,pins = "GPIO73_C21", "GPIO74_C20";
+ ste,input = <1>;
+ };
+ };
+ };
+ };
+
+ src: src@101e0000 {
+ compatible = "stericsson,nomadik-src";
+ reg = <0x101e0000 0x1000>;
+ disable-sxtalo;
+ disable-mxtalo;
+
+ /*
+ * MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz
+ * that is parent of TIMCLK, PLL1 and PLL2
+ */
+ mxtal: mxtal@19.2M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <19200000>;
+ };
+
+ /*
+ * The 2.4 MHz TIMCLK reference clock is active at
+ * boot time, this is actually the MXTALCLK @19.2 MHz
+ * divided by 8. This clock is used by the timers and
+ * watchdog. See page 105 ff.
+ */
+ timclk: timclk@2.4M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <8>;
+ clock-mult = <1>;
+ clocks = <&mxtal>;
+ };
+
+ /* PLL1 is locked to MXTALI and variable from 20.4 to 334 MHz */
+ pll1: pll1@0 {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-pll-clock";
+ pll-id = <1>;
+ clocks = <&mxtal>;
+ };
+
+ /* HCLK divides the PLL1 with 1,2,3 or 4 */
+ hclk: hclk@0 {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-hclk-clock";
+ clocks = <&pll1>;
+ };
+ /* The PCLK domain uses HCLK right off */
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&hclk>;
+ };
+
+ /* PLL2 is usually 864 MHz and divided into a few fixed rates */
+ pll2: pll2@0 {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-pll-clock";
+ pll-id = <2>;
+ clocks = <&mxtal>;
+ };
+ clk216: clk216@216M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <4>;
+ clock-mult = <1>;
+ clocks = <&pll2>;
+ };
+ clk108: clk108@108M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <2>;
+ clock-mult = <1>;
+ clocks = <&clk216>;
+ };
+ clk72: clk72@72M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ /* The data sheet does not say how this is derived */
+ clock-div = <12>;
+ clock-mult = <1>;
+ clocks = <&pll2>;
+ };
+ clk48: clk48@48M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ /* The data sheet does not say how this is derived */
+ clock-div = <18>;
+ clock-mult = <1>;
+ clocks = <&pll2>;
+ };
+ clk27: clk27@27M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <4>;
+ clock-mult = <1>;
+ clocks = <&clk108>;
+ };
+
+ /* This apparently exists as well */
+ ulpiclk: ulpiclk@60M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <60000000>;
+ };
+
+ /*
+ * IP AMBA bus clocks, driving the bus side of the
+ * peripheral clocking, clock gates.
+ */
+
+ hclkdma0: hclkdma0@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <0>;
+ clocks = <&hclk>;
+ };
+ hclksmc: hclksmc@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <1>;
+ clocks = <&hclk>;
+ };
+ hclksdram: hclksdram@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <2>;
+ clocks = <&hclk>;
+ };
+ hclkdma1: hclkdma1@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <3>;
+ clocks = <&hclk>;
+ };
+ hclkclcd: hclkclcd@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <4>;
+ clocks = <&hclk>;
+ };
+ pclkirda: pclkirda@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <5>;
+ clocks = <&pclk>;
+ };
+ pclkssp: pclkssp@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <6>;
+ clocks = <&pclk>;
+ };
+ pclkuart0: pclkuart0@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <7>;
+ clocks = <&pclk>;
+ };
+ pclksdi: pclksdi@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <8>;
+ clocks = <&pclk>;
+ };
+ pclki2c0: pclki2c0@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <9>;
+ clocks = <&pclk>;
+ };
+ pclki2c1: pclki2c1@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <10>;
+ clocks = <&pclk>;
+ };
+ pclkuart1: pclkuart1@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <11>;
+ clocks = <&pclk>;
+ };
+ pclkmsp0: pclkmsp0@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <12>;
+ clocks = <&pclk>;
+ };
+ hclkusb: hclkusb@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <13>;
+ clocks = <&hclk>;
+ };
+ hclkdif: hclkdif@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <14>;
+ clocks = <&hclk>;
+ };
+ hclksaa: hclksaa@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <15>;
+ clocks = <&hclk>;
+ };
+ hclksva: hclksva@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <16>;
+ clocks = <&hclk>;
+ };
+ pclkhsi: pclkhsi@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <17>;
+ clocks = <&pclk>;
+ };
+ pclkxti: pclkxti@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <18>;
+ clocks = <&pclk>;
+ };
+ pclkuart2: pclkuart2@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <19>;
+ clocks = <&pclk>;
+ };
+ pclkmsp1: pclkmsp1@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <20>;
+ clocks = <&pclk>;
+ };
+ pclkmsp2: pclkmsp2@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <21>;
+ clocks = <&pclk>;
+ };
+ pclkowm: pclkowm@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <22>;
+ clocks = <&pclk>;
+ };
+ hclkhpi: hclkhpi@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <23>;
+ clocks = <&hclk>;
+ };
+ pclkske: pclkske@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <24>;
+ clocks = <&pclk>;
+ };
+ pclkhsem: pclkhsem@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <25>;
+ clocks = <&pclk>;
+ };
+ hclk3d: hclk3d@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <26>;
+ clocks = <&hclk>;
+ };
+ hclkhash: hclkhash@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <27>;
+ clocks = <&hclk>;
+ };
+ hclkcryp: hclkcryp@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <28>;
+ clocks = <&hclk>;
+ };
+ pclkmshc: pclkmshc@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <29>;
+ clocks = <&pclk>;
+ };
+ hclkusbm: hclkusbm@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <30>;
+ clocks = <&hclk>;
+ };
+ hclkrng: hclkrng@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <31>;
+ clocks = <&hclk>;
+ };
+
+ /* IP kernel clocks */
+ clcdclk: clcdclk@0 {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <36>;
+ clocks = <&clk72 &clk48>;
+ };
+ irdaclk: irdaclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <37>;
+ clocks = <&clk48>;
+ };
+ sspiclk: sspiclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <38>;
+ clocks = <&clk48>;
+ };
+ uart0clk: uart0clk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <39>;
+ clocks = <&clk48>;
+ };
+ sdiclk: sdiclk@48M {
+ /* Also called MCCLK in some documents */
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <40>;
+ clocks = <&clk48>;
+ };
+ i2c0clk: i2c0clk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <41>;
+ clocks = <&clk48>;
+ };
+ i2c1clk: i2c1clk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <42>;
+ clocks = <&clk48>;
+ };
+ uart1clk: uart1clk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <43>;
+ clocks = <&clk48>;
+ };
+ mspclk0: mspclk0@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <44>;
+ clocks = <&clk48>;
+ };
+ usbclk: usbclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <45>;
+ clocks = <&clk48>; /* 48 MHz not ULPI */
+ };
+ difclk: difclk@72M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <46>;
+ clocks = <&clk72>;
+ };
+ ipi2cclk: ipi2cclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <47>;
+ clocks = <&clk48>; /* Guess */
+ };
+ ipbmcclk: ipbmcclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <48>;
+ clocks = <&clk48>; /* Guess */
+ };
+ hsiclkrx: hsiclkrx@216M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <49>;
+ clocks = <&clk216>;
+ };
+ hsiclktx: hsiclktx@108M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <50>;
+ clocks = <&clk108>;
+ };
+ uart2clk: uart2clk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <51>;
+ clocks = <&clk48>;
+ };
+ mspclk1: mspclk1@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <52>;
+ clocks = <&clk48>;
+ };
+ mspclk2: mspclk2@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <53>;
+ clocks = <&clk48>;
+ };
+ owmclk: owmclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <54>;
+ clocks = <&clk48>; /* Guess */
+ };
+ skeclk: skeclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <56>;
+ clocks = <&clk48>; /* Guess */
+ };
+ x3dclk: x3dclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <58>;
+ clocks = <&clk48>; /* Guess */
+ };
+ pclkmsp3: pclkmsp3@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <59>;
+ clocks = <&pclk>;
+ };
+ mspclk3: mspclk3@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <60>;
+ clocks = <&clk48>;
+ };
+ mshcclk: mshcclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <61>;
+ clocks = <&clk48>; /* Guess */
+ };
+ usbmclk: usbmclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <62>;
+ /* Stated as "48 MHz not ULPI clock" */
+ clocks = <&clk48>;
+ };
+ rngcclk: rngcclk@48M {
+ #clock-cells = <0>;
+ compatible = "st,nomadik-src-clock";
+ clock-id = <63>;
+ clocks = <&clk48>; /* Guess */
+ };
};
/* A NAND flash of 128 MiB */
<0x41000000 0x2000>, /* NAND Base ADDR */
<0x40800000 0x2000>; /* NAND Base CMD */
reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+ clocks = <&hclksmc>;
status = "okay";
partition@0 {
<&gpio1 30 0>; /* scl */
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_default_mode>;
stw4811@2d {
compatible = "st,stw4811";
<&gpio1 21 0>; /* scl */
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_default_mode>;
camera@2d {
compatible = "st,camera";
<&gpio2 9 0>; /* scl */
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_default_mode>;
+
stw4811@2d {
compatible = "st,stw4811-usb";
reg = <0x2d>;
reg = <0x101fd000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <12>;
+ clocks = <&uart0clk>, <&pclkuart0>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_default_mux>;
};
uart1: uart@101fb000 {
reg = <0x101fb000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <17>;
+ clocks = <&uart1clk>, <&pclkuart1>;
+ clock-names = "uartclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_default_mux>;
};
uart2: uart@101f2000 {
reg = <0x101f2000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <28>;
+ clocks = <&uart2clk>, <&pclkuart2>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
rng: rng@101b0000 {
compatible = "arm,primecell";
reg = <0x101b0000 0x1000>;
+ clocks = <&rngcclk>, <&hclkrng>;
+ clock-names = "rng", "apb_pclk";
};
rtc: rtc@101e8000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0x101e8000 0x1000>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
interrupt-parent = <&vica>;
interrupts = <10>;
};
mmcsd: sdi@101f6000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x101f6000 0x1000>;
+ clocks = <&sdiclk>, <&pclksdi>;
+ clock-names = "mclk", "apb_pclk";
interrupt-parent = <&vica>;
interrupts = <22>;
max-frequency = <48000000>;
mmc-cap-sd-highspeed;
cd-gpios = <&gpio3 15 0x1>;
cd-inverted;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
};
};
};
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <dt-bindings/interrupt-controller/irq.h>
+
/ {
- soc-u9500 {
+ soc {
i2c@80004000 {
stmpe1601: stmpe1601@40 {
compatible = "st,stmpe1601";
reg = <0x40>;
- interrupts = <26 0x2>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
interrupt-parent = <&gpio6>;
interrupt-controller;
};
i2c@80110000 {
- bu21013_tp@0x5c {
- compatible = "rhom,bu21013_tp";
+ bu21013_tp@5c {
+ compatible = "rohm,bu21013_tp";
reg = <0x5c>;
touch-gpio = <&gpio2 20 0x4>;
avdd-supply = <&ab8500_ldo_aux1_reg>;
- rhom,touch-max-x = <384>;
- rhom,touch-max-y = <704>;
- rhom,flip-y;
+ rohm,touch-max-x = <384>;
+ rohm,touch-max-y = <704>;
+ rohm,flip-y;
};
- bu21013_tp@0x5d {
- compatible = "rhom,bu21013_tp";
+ bu21013_tp@5d {
+ compatible = "rohm,bu21013_tp";
reg = <0x5d>;
touch-gpio = <&gpio2 20 0x4>;
avdd-supply = <&ab8500_ldo_aux1_reg>;
- rhom,touch-max-x = <384>;
- rhom,touch-max-y = <704>;
- rhom,flip-y;
+ rohm,touch-max-x = <384>;
+ rohm,touch-max-y = <704>;
+ rohm,flip-y;
};
};
};
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+ };
+
+ i2c1: i2c@01c2b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
};
leds {
interrupt-parent = <&intc>;
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
+ device_type = "cpu";
compatible = "arm,cortex-a8";
+ reg = <0x0>;
};
};
pio: pinctrl@01c20800 {
compatible = "allwinner,sun4i-a10-pinctrl";
reg = <0x01c20800 0x400>;
+ interrupts = <28>;
clocks = <&apb0_gates 5>;
gpio-controller;
+ interrupt-controller;
#address-cells = <1>;
#size-cells = <0>;
#gpio-cells = <3>;
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ i2c0_pins_a: i2c0@0 {
+ allwinner,pins = "PB0", "PB1";
+ allwinner,function = "i2c0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ allwinner,pins = "PB18", "PB19";
+ allwinner,function = "i2c1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ i2c2_pins_a: i2c2@0 {
+ allwinner,pins = "PB20", "PB21";
+ allwinner,function = "i2c2";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
clocks = <&apb1_gates 23>;
status = "disabled";
};
+
+ i2c0: i2c@01c2ac00 {
+ compatible = "allwinner,sun4i-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <7>;
+ clocks = <&apb1_gates 0>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@01c2b000 {
+ compatible = "allwinner,sun4i-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <8>;
+ clocks = <&apb1_gates 1>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@01c2b400 {
+ compatible = "allwinner,sun4i-i2c";
+ reg = <0x01c2b400 0x400>;
+ interrupts = <9>;
+ clocks = <&apb1_gates 2>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
};
};
--- /dev/null
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun5i-a10s.dtsi"
+
+/ {
+ model = "Olimex A10s-Olinuxino Micro";
+ compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
+
+ soc@01c20000 {
+ emac: ethernet@01c0b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+ };
+
+ mdio@01c0b080 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ pinctrl@01c20800 {
+ led_pins_olinuxino: led_pins@0 {
+ allwinner,pins = "PE3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <1>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+
+ uart2: serial@01c28800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_a>;
+ status = "okay";
+ };
+
+ uart3: serial@01c28c00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_a>;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxino>;
+
+ green {
+ label = "a10s-olinuxino-micro:green:usr";
+ gpios = <&pio 4 3 0>;
+ default-state = "on";
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&intc>;
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ };
+ };
+
+ memory {
+ reg = <0x40000000 0x20000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /*
+ * This is a dummy clock, to be used as placeholder on
+ * other mux clocks when a specific parent clock is not
+ * yet implemented. It should be dropped when the driver
+ * is complete.
+ */
+ dummy: dummy {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc24M: osc24M@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-osc-clk";
+ reg = <0x01c20050 0x4>;
+ clock-frequency = <24000000>;
+ };
+
+ osc32k: osc32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ pll1: pll1@01c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-pll1-clk";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+ };
+
+ /* dummy is 200M */
+ cpu: cpu@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-cpu-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+ };
+
+ axi: axi@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-axi-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&cpu>;
+ };
+
+ axi_gates: axi_gates@01c2005c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-axi-gates-clk";
+ reg = <0x01c2005c 0x4>;
+ clocks = <&axi>;
+ clock-output-names = "axi_dram";
+ };
+
+ ahb: ahb@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-ahb-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&axi>;
+ };
+
+ ahb_gates: ahb_gates@01c20060 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-ahb-gates-clk";
+ reg = <0x01c20060 0x8>;
+ clocks = <&ahb>;
+ clock-output-names = "ahb_usb0", "ahb_ehci0",
+ "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
+ "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+ "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
+ "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts",
+ "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
+ "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
+ "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
+ "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
+ "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
+ "ahb_de_fe1", "ahb_mp", "ahb_mali400";
+ };
+
+ apb0: apb0@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-apb0-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&ahb>;
+ };
+
+ apb0_gates: apb0_gates@01c20068 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-apb0-gates-clk";
+ reg = <0x01c20068 0x4>;
+ clocks = <&apb0>;
+ clock-output-names = "apb0_codec", "apb0_spdif",
+ "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
+ "apb0_ir1", "apb0_keypad";
+ };
+
+ /* dummy is pll62 */
+ apb1_mux: apb1_mux@01c20058 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-apb1-mux-clk";
+ reg = <0x01c20058 0x4>;
+ clocks = <&osc24M>, <&dummy>, <&osc32k>;
+ };
+
+ apb1: apb1@01c20058 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-apb1-clk";
+ reg = <0x01c20058 0x4>;
+ clocks = <&apb1_mux>;
+ };
+
+ apb1_gates: apb1_gates@01c2006c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-apb1-gates-clk";
+ reg = <0x01c2006c 0x4>;
+ clocks = <&apb1>;
+ clock-output-names = "apb1_i2c0", "apb1_i2c1",
+ "apb1_i2c2", "apb1_can", "apb1_scr",
+ "apb1_ps20", "apb1_ps21", "apb1_uart0",
+ "apb1_uart1", "apb1_uart2", "apb1_uart3",
+ "apb1_uart4", "apb1_uart5", "apb1_uart6",
+ "apb1_uart7";
+ };
+ };
+
+ soc@01c20000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x01c20000 0x300000>;
+ ranges;
+
+ emac: ethernet@01c0b000 {
+ compatible = "allwinner,sun4i-emac";
+ reg = <0x01c0b000 0x1000>;
+ interrupts = <55>;
+ clocks = <&ahb_gates 17>;
+ status = "disabled";
+ };
+
+ mdio@01c0b080 {
+ compatible = "allwinner,sun4i-mdio";
+ reg = <0x01c0b080 0x14>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ intc: interrupt-controller@01c20400 {
+ compatible = "allwinner,sun4i-ic";
+ reg = <0x01c20400 0x400>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ pio: pinctrl@01c20800 {
+ compatible = "allwinner,sun5i-a10s-pinctrl";
+ reg = <0x01c20800 0x400>;
+ interrupts = <28>;
+ clocks = <&apb0_gates 5>;
+ gpio-controller;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #gpio-cells = <3>;
+
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PB19", "PB20";
+ allwinner,function = "uart0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart2_pins_a: uart2@0 {
+ allwinner,pins = "PC18", "PC19";
+ allwinner,function = "uart2";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart3_pins_a: uart3@0 {
+ allwinner,pins = "PG9", "PG10";
+ allwinner,function = "uart3";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ emac_pins_a: emac0@0 {
+ allwinner,pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ allwinner,function = "emac";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ timer@01c20c00 {
+ compatible = "allwinner,sun4i-timer";
+ reg = <0x01c20c00 0x90>;
+ interrupts = <22>;
+ clocks = <&osc24M>;
+ };
+
+ wdt: watchdog@01c20c90 {
+ compatible = "allwinner,sun4i-wdt";
+ reg = <0x01c20c90 0x10>;
+ };
+
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 16>;
+ status = "disabled";
+ };
+
+ uart1: serial@01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <2>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 17>;
+ status = "disabled";
+ };
+
+ uart2: serial@01c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <3>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 18>;
+ status = "disabled";
+ };
+
+ uart3: serial@01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 19>;
+ status = "disabled";
+ };
+ };
+};
pinctrl-0 = <&uart1_pins_b>;
status = "okay";
};
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+ };
+
+ i2c1: i2c@01c2b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
+
+ i2c2: i2c@01c2b400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+ };
};
leds {
interrupt-parent = <&intc>;
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
+ device_type = "cpu";
compatible = "arm,cortex-a8";
+ reg = <0x0>;
};
};
ahb_gates: ahb_gates@01c20060 {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-ahb-gates-clk";
+ compatible = "allwinner,sun5i-a13-ahb-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
- "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
- "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
- "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
- "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts",
- "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
- "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
- "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
- "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
- "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
- "ahb_de_fe1", "ahb_mp", "ahb_mali400";
+ clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
+ "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+ "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
+ "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer",
+ "ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be",
+ "ahb_de_fe", "ahb_iep", "ahb_mali400";
};
apb0: apb0@01c20054 {
apb0_gates: apb0_gates@01c20068 {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-apb0-gates-clk";
+ compatible = "allwinner,sun5i-a13-apb0-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb0>;
- clock-output-names = "apb0_codec", "apb0_spdif",
- "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
- "apb0_ir1", "apb0_keypad";
+ clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
};
- /* dummy is pll62 */
+ /* dummy is pll6 */
apb1_mux: apb1_mux@01c20058 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-apb1-mux-clk";
apb1_gates: apb1_gates@01c2006c {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-apb1-gates-clk";
+ compatible = "allwinner,sun5i-a13-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
clocks = <&apb1>;
clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_can", "apb1_scr",
- "apb1_ps20", "apb1_ps21", "apb1_uart0",
- "apb1_uart1", "apb1_uart2", "apb1_uart3",
- "apb1_uart4", "apb1_uart5", "apb1_uart6",
- "apb1_uart7";
+ "apb1_i2c2", "apb1_uart1", "apb1_uart3";
};
};
pio: pinctrl@01c20800 {
compatible = "allwinner,sun5i-a13-pinctrl";
reg = <0x01c20800 0x400>;
+ interrupts = <28>;
clocks = <&apb0_gates 5>;
gpio-controller;
+ interrupt-controller;
#address-cells = <1>;
#size-cells = <0>;
#gpio-cells = <3>;
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ i2c0_pins_a: i2c0@0 {
+ allwinner,pins = "PB0", "PB1";
+ allwinner,function = "i2c0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ allwinner,pins = "PB15", "PB16";
+ allwinner,function = "i2c1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ i2c2_pins_a: i2c2@0 {
+ allwinner,pins = "PB17", "PB18";
+ allwinner,function = "i2c2";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
clocks = <&apb1_gates 19>;
status = "disabled";
};
+
+ i2c0: i2c@01c2ac00 {
+ compatible = "allwinner,sun4i-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <7>;
+ clocks = <&apb1_gates 0>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@01c2b000 {
+ compatible = "allwinner,sun4i-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <8>;
+ clocks = <&apb1_gates 1>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@01c2b400 {
+ compatible = "allwinner,sun4i-i2c";
+ reg = <0x01c2b400 0x400>;
+ interrupts = <9>;
+ clocks = <&apb1_gates 2>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
};
};
/dts-v1/;
-/include/ "tegra114.dtsi"
+#include "tegra114.dtsi"
/ {
model = "NVIDIA Tegra114 Dalmore evaluation board";
battery-name = "battery";
sbs,i2c-retry-count = <2>;
sbs,poll-retry-count = <100>;
+ power-supplies = <&charger>;
+ };
+
+ rt5640: rt5640 {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+ realtek,ldo1-en-gpios =
+ <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
};
};
compatible = "ti,tps65090";
reg = <0x48>;
interrupt-parent = <&gpio>;
- interrupts = <72 0x04>; /* gpio PJ0 */
+ interrupts = <TEGRA_GPIO(J, 0) IRQ_TYPE_LEVEL_HIGH>;
vsys1-supply = <&vdd_ac_bat_reg>;
vsys2-supply = <&vdd_ac_bat_reg>;
vsys-l1-supply = <&vdd_ac_bat_reg>;
vsys-l2-supply = <&vdd_ac_bat_reg>;
+ charger: charger {
+ compatible = "ti,tps65090-charger";
+ ti,enable-low-current-chrg;
+ };
+
regulators {
tps65090_dcdc1_reg: dcdc1 {
regulator-name = "vdd-sys-5v0";
};
};
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ spi-flash@0 {
+ compatible = "winbond,w25q32dw";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+ };
+
pmc {
nvidia,invert-interrupt;
};
+ ahub {
+ i2s@70080400 {
+ status = "okay";
+ };
+ };
+
sdhci@78000400 {
- cd-gpios = <&gpio 170 1>; /* gpio PV2 */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
bus-width = <4>;
status = "okay";
};
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
- gpio = <&gpio 61 0>; /* GPIO PH5 */
+ gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
};
lcd_bl_en_reg: regulator@2 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 58 0>; /* GPIO PH2 */
+ gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
};
usb1_vbus_reg: regulator@3 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 108 0>; /* GPIO PN4 */
+ gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&tps65090_dcdc1_reg>;
};
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 86 0>; /* GPIO PK6 */
+ gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&tps65090_dcdc1_reg>;
};
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 81 0>; /* GPIO PK1 */
+ gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
vin-supply = <&tps65090_dcdc1_reg>;
};
};
+
+ sound {
+ compatible = "nvidia,tegra-audio-rt5640-dalmore",
+ "nvidia,tegra-audio-rt5640";
+ nvidia,model = "NVIDIA Tegra Dalmore";
+
+ nvidia,audio-routing =
+ "Headphones", "HPOR",
+ "Headphones", "HPOL",
+ "Speakers", "SPORP",
+ "Speakers", "SPORN",
+ "Speakers", "SPOLP",
+ "Speakers", "SPOLN";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&rt5640>;
+
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+
+ clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
+ <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA114_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+ };
};
/dts-v1/;
-/include/ "tegra114.dtsi"
+#include "tegra114.dtsi"
/ {
model = "NVIDIA Tegra114 Pluto evaluation board";
-/include/ "skeleton.dtsi"
+#include <dt-bindings/clock/tegra114-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
/ {
compatible = "nvidia,tegra114";
<0x50042000 0x1000>,
<0x50044000 0x2000>,
<0x50046000 0x2000>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
timer@60005000 {
compatible = "nvidia,tegra114-timer", "nvidia,tegra20-timer";
reg = <0x60005000 0x400>;
- interrupts = <0 0 0x04
- 0 1 0x04
- 0 41 0x04
- 0 42 0x04
- 0 121 0x04
- 0 122 0x04>;
- clocks = <&tegra_car 5>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA114_CLK_TIMER>;
};
tegra_car: clock {
apbdma: dma {
compatible = "nvidia,tegra114-apbdma";
reg = <0x6000a000 0x1400>;
- interrupts = <0 104 0x04
- 0 105 0x04
- 0 106 0x04
- 0 107 0x04
- 0 108 0x04
- 0 109 0x04
- 0 110 0x04
- 0 111 0x04
- 0 112 0x04
- 0 113 0x04
- 0 114 0x04
- 0 115 0x04
- 0 116 0x04
- 0 117 0x04
- 0 118 0x04
- 0 119 0x04
- 0 128 0x04
- 0 129 0x04
- 0 130 0x04
- 0 131 0x04
- 0 132 0x04
- 0 133 0x04
- 0 134 0x04
- 0 135 0x04
- 0 136 0x04
- 0 137 0x04
- 0 138 0x04
- 0 139 0x04
- 0 140 0x04
- 0 141 0x04
- 0 142 0x04
- 0 143 0x04>;
- clocks = <&tegra_car 34>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA114_CLK_APBDMA>;
};
ahb: ahb {
gpio: gpio {
compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
reg = <0x6000d000 0x1000>;
- interrupts = <0 32 0x04
- 0 33 0x04
- 0 34 0x04
- 0 35 0x04
- 0 55 0x04
- 0 87 0x04
- 0 89 0x04
- 0 125 0x04>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
- interrupts = <0 36 0x04>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 8>;
status = "disabled";
- clocks = <&tegra_car 6>;
+ clocks = <&tegra_car TEGRA114_CLK_UARTA>;
};
uartb: serial@70006040 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
- interrupts = <0 37 0x04>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 9>;
status = "disabled";
- clocks = <&tegra_car 192>;
+ clocks = <&tegra_car TEGRA114_CLK_UARTB>;
};
uartc: serial@70006200 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
- interrupts = <0 46 0x04>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 10>;
status = "disabled";
- clocks = <&tegra_car 55>;
+ clocks = <&tegra_car TEGRA114_CLK_UARTC>;
};
uartd: serial@70006300 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
- interrupts = <0 90 0x04>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 19>;
status = "disabled";
- clocks = <&tegra_car 65>;
+ clocks = <&tegra_car TEGRA114_CLK_UARTD>;
};
pwm: pwm {
compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
- clocks = <&tegra_car 17>;
+ clocks = <&tegra_car TEGRA114_CLK_PWM>;
status = "disabled";
};
i2c@7000c000 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000c000 0x100>;
- interrupts = <0 38 0x04>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 12>;
+ clocks = <&tegra_car TEGRA114_CLK_I2C1>;
clock-names = "div-clk";
status = "disabled";
};
i2c@7000c400 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000c400 0x100>;
- interrupts = <0 84 0x04>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 54>;
+ clocks = <&tegra_car TEGRA114_CLK_I2C2>;
clock-names = "div-clk";
status = "disabled";
};
i2c@7000c500 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000c500 0x100>;
- interrupts = <0 92 0x04>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 67>;
+ clocks = <&tegra_car TEGRA114_CLK_I2C3>;
clock-names = "div-clk";
status = "disabled";
};
i2c@7000c700 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000c700 0x100>;
- interrupts = <0 120 0x04>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 103>;
+ clocks = <&tegra_car TEGRA114_CLK_I2C4>;
clock-names = "div-clk";
status = "disabled";
};
i2c@7000d000 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000d000 0x100>;
- interrupts = <0 53 0x04>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 47>;
+ clocks = <&tegra_car TEGRA114_CLK_I2C5>;
clock-names = "div-clk";
status = "disabled";
};
spi@7000d400 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000d400 0x200>;
- interrupts = <0 59 0x04>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 41>;
+ clocks = <&tegra_car TEGRA114_CLK_SBC1>;
clock-names = "spi";
status = "disabled";
};
spi@7000d600 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000d600 0x200>;
- interrupts = <0 82 0x04>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 44>;
+ clocks = <&tegra_car TEGRA114_CLK_SBC2>;
clock-names = "spi";
status = "disabled";
};
spi@7000d800 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000d800 0x200>;
- interrupts = <0 83 0x04>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 46>;
+ clocks = <&tegra_car TEGRA114_CLK_SBC3>;
clock-names = "spi";
status = "disabled";
};
spi@7000da00 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000da00 0x200>;
- interrupts = <0 93 0x04>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 68>;
+ clocks = <&tegra_car TEGRA114_CLK_SBC4>;
clock-names = "spi";
status = "disabled";
};
spi@7000dc00 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000dc00 0x200>;
- interrupts = <0 94 0x04>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 27>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 104>;
+ clocks = <&tegra_car TEGRA114_CLK_SBC5>;
clock-names = "spi";
status = "disabled";
};
spi@7000de00 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000de00 0x200>;
- interrupts = <0 79 0x04>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 28>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 105>;
+ clocks = <&tegra_car TEGRA114_CLK_SBC6>;
clock-names = "spi";
status = "disabled";
};
rtc {
compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
- interrupts = <0 2 0x04>;
- clocks = <&tegra_car 4>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA114_CLK_RTC>;
};
kbc {
compatible = "nvidia,tegra114-kbc";
reg = <0x7000e200 0x100>;
- interrupts = <0 85 0x04>;
- clocks = <&tegra_car 36>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA114_CLK_KBC>;
status = "disabled";
};
pmc {
compatible = "nvidia,tegra114-pmc";
reg = <0x7000e400 0x400>;
- clocks = <&tegra_car 261>, <&clk32k_in>;
+ clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
};
nvidia,ahb = <&ahb>;
};
+ ahub {
+ compatible = "nvidia,tegra114-ahub";
+ reg = <0x70080000 0x200>,
+ <0x70080200 0x100>,
+ <0x70081000 0x200>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,dma-request-selector = <&apbdma 1>, <&apbdma 2>,
+ <&apbdma 3>, <&apbdma 4>, <&apbdma 6>, <&apbdma 7>,
+ <&apbdma 12>, <&apbdma 13>, <&apbdma 14>,
+ <&apbdma 29>;
+ clocks = <&tegra_car TEGRA114_CLK_D_AUDIO>,
+ <&tegra_car TEGRA114_CLK_APBIF>,
+ <&tegra_car TEGRA114_CLK_I2S0>,
+ <&tegra_car TEGRA114_CLK_I2S1>,
+ <&tegra_car TEGRA114_CLK_I2S2>,
+ <&tegra_car TEGRA114_CLK_I2S3>,
+ <&tegra_car TEGRA114_CLK_I2S4>,
+ <&tegra_car TEGRA114_CLK_DAM0>,
+ <&tegra_car TEGRA114_CLK_DAM1>,
+ <&tegra_car TEGRA114_CLK_DAM2>,
+ <&tegra_car TEGRA114_CLK_SPDIF_IN>,
+ <&tegra_car TEGRA114_CLK_AMX>,
+ <&tegra_car TEGRA114_CLK_ADX>;
+ clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+ "i2s3", "i2s4", "dam0", "dam1", "dam2",
+ "spdif_in", "amx", "adx";
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tegra_i2s0: i2s@70080300 {
+ compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+ reg = <0x70080300 0x100>;
+ nvidia,ahub-cif-ids = <4 4>;
+ clocks = <&tegra_car TEGRA114_CLK_I2S0>;
+ status = "disabled";
+ };
+
+ tegra_i2s1: i2s@70080400 {
+ compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+ reg = <0x70080400 0x100>;
+ nvidia,ahub-cif-ids = <5 5>;
+ clocks = <&tegra_car TEGRA114_CLK_I2S1>;
+ status = "disabled";
+ };
+
+ tegra_i2s2: i2s@70080500 {
+ compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+ reg = <0x70080500 0x100>;
+ nvidia,ahub-cif-ids = <6 6>;
+ clocks = <&tegra_car TEGRA114_CLK_I2S2>;
+ status = "disabled";
+ };
+
+ tegra_i2s3: i2s@70080600 {
+ compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+ reg = <0x70080600 0x100>;
+ nvidia,ahub-cif-ids = <7 7>;
+ clocks = <&tegra_car TEGRA114_CLK_I2S3>;
+ status = "disabled";
+ };
+
+ tegra_i2s4: i2s@70080700 {
+ compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+ reg = <0x70080700 0x100>;
+ nvidia,ahub-cif-ids = <8 8>;
+ clocks = <&tegra_car TEGRA114_CLK_I2S4>;
+ status = "disabled";
+ };
+ };
+
sdhci@78000000 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000000 0x200>;
- interrupts = <0 14 0x04>;
- clocks = <&tegra_car 14>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
status = "disable";
};
sdhci@78000200 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000200 0x200>;
- interrupts = <0 15 0x04>;
- clocks = <&tegra_car 9>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA114_CLK_SDMMC2>;
status = "disable";
};
sdhci@78000400 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000400 0x200>;
- interrupts = <0 19 0x04>;
- clocks = <&tegra_car 69>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA114_CLK_SDMMC3>;
status = "disable";
};
sdhci@78000600 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000600 0x200>;
- interrupts = <0 31 0x04>;
- clocks = <&tegra_car 15>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA114_CLK_SDMMC4>;
status = "disable";
};
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
+ interrupts =
+ <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
};
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi"
/ {
model = "Toradex Colibri T20 512MB";
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&i2c_ddc>;
- nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+ GPIO_ACTIVE_HIGH>;
};
};
pmic: tps6586x@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
- interrupts = <0 86 0x4>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
ti,system-power-controller;
ac97: ac97 {
status = "okay";
- nvidia,codec-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
- nvidia,codec-sync-gpio = <&gpio 120 0>; /* gpio PP0 */
+ nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
+ GPIO_ACTIVE_HIGH>;
};
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+ GPIO_ACTIVE_LOW>;
};
usb-phy@c5004000 {
- nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+ GPIO_ACTIVE_LOW>;
};
sdhci@c8000600 {
- cd-gpios = <&gpio 23 1>; /* gpio PC7 */
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
};
clocks {
nvidia,ac97-controller = <&ac97>;
- clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
enable-active-high;
regulator-boot-on;
regulator-always-on;
- gpio = <&gpio 217 0>;
+ gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
};
};
};
/dts-v1/;
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi"
/ {
model = "NVIDIA Tegra20 Harmony evaluation board";
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
- nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+ GPIO_ACTIVE_HIGH>;
};
};
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = <187 0x04>;
+ interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
pmic: tps6586x@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
- interrupts = <0 86 0x4>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
ti,system-power-controller;
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+ GPIO_ACTIVE_LOW>;
};
usb-phy@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+ GPIO_ACTIVE_LOW>;
};
usb@c5008000 {
sdhci@c8000200 {
status = "okay";
- cd-gpios = <&gpio 69 1>; /* gpio PI5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
sdhci@c8000600 {
status = "okay";
- cd-gpios = <&gpio 58 1>; /* gpio PH2 */
- wp-gpios = <&gpio 59 0>; /* gpio PH3 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
bus-width = <8>;
};
power {
label = "Power";
- gpios = <&gpio 170 1>; /* gpio PV2, active low */
+ gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
regulator-name = "vdd_1v5";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&pmic 0 0>;
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
};
regulator@2 {
regulator-name = "vdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- gpio = <&pmic 1 0>;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "vdd_1v05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- gpio = <&pmic 2 0>;
+ gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
/* Hack until board-harmony-pcie.c is removed */
status = "disabled";
regulator-name = "vdd_pnl";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpio 22 0>; /* gpio PC6 */
+ gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "vdd_bl";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpio 176 0>; /* gpio PW0 */
+ gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&wm8903>;
- nvidia,spkr-en-gpios = <&wm8903 2 0>;
- nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
- nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
- nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
-
- clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
+ GPIO_ACTIVE_HIGH>;
+
+ clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
/dts-v1/;
-/include/ "tegra20-colibri-512.dtsi"
+#include "tegra20-colibri-512.dtsi"
/ {
model = "Toradex Colibri T20 512MB on Iris";
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
- gpio = <&gpio 178 0>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
};
vcc_sd_reg: regulator@1 {
/dts-v1/;
-/include/ "tegra20-tamonten.dtsi"
+#include "tegra20-tamonten.dtsi"
/ {
model = "Avionic Design Medcom-Wide board";
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = <187 0x04>;
+ interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&wm8903>;
- nvidia,spkr-en-gpios = <&wm8903 2 0>;
- nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
- clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
/dts-v1/;
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi"
/ {
model = "Toshiba AC100 / Dynabook AZ";
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
- nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+ GPIO_ACTIVE_HIGH>;
};
};
nvec {
compatible = "nvidia,nvec";
reg = <0x7000c500 0x100>;
- interrupts = <0 92 0x04>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <80000>;
- request-gpios = <&gpio 170 0>; /* gpio PV2 */
+ request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
slave-addr = <138>;
- clocks = <&tegra_car 67>, <&tegra_car 124>;
+ clocks = <&tegra_car TEGRA20_CLK_I2C3>,
+ <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
};
pmic: tps6586x@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
- interrupts = <0 86 0x4>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+ GPIO_ACTIVE_LOW>;
};
usb-phy@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+ GPIO_ACTIVE_LOW>;
};
usb@c5008000 {
sdhci@c8000000 {
status = "okay";
- cd-gpios = <&gpio 173 1>; /* gpio PV5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 169 0>; /* gpio PV1 */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
power {
label = "Power";
- gpios = <&gpio 79 1>; /* gpio PJ7, active low */
+ gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
wifi {
label = "wifi-led";
- gpios = <&gpio 24 0>; /* gpio PD0 */
+ gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
linux,default-trigger = "rfkill0";
};
};
nvidia,audio-codec = <&alc5632>;
nvidia,i2s-controller = <&tegra_i2s1>;
- nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+ GPIO_ACTIVE_HIGH>;
- clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
/dts-v1/;
-/include/ "tegra20-tamonten.dtsi"
+#include "tegra20-tamonten.dtsi"
/ {
model = "Avionic Design Plutux board";
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = <187 0x04>;
+ interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&wm8903>;
- nvidia,spkr-en-gpios = <&wm8903 2 0>;
- nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
- clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
/dts-v1/;
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi"
/ {
model = "NVIDIA Seaboard";
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
- nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+ GPIO_ACTIVE_HIGH>;
};
};
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = <187 0x04>;
+ interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
compatible = "isil,isl29018";
reg = <0x44>;
interrupt-parent = <&gpio>;
- interrupts = <202 0x04>; /* GPIO PZ2 */
+ interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
};
gyrometer@68 {
compatible = "invn,mpu3050";
reg = <0x68>;
interrupt-parent = <&gpio>;
- interrupts = <204 0x04>; /* gpio PZ4 */
+ interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_LEVEL_HIGH>;
};
};
pmic: tps6586x@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
- interrupts = <0 86 0x4>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
ti,system-power-controller;
compatible = "ak,ak8975";
reg = <0xc>;
interrupt-parent = <&gpio>;
- interrupts = <109 0x04>; /* gpio PN5 */
+ interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>;
};
};
usb@c5000000 {
status = "okay";
- nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
dr_mode = "otg";
};
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+ GPIO_ACTIVE_LOW>;
};
usb-phy@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+ GPIO_ACTIVE_LOW>;
};
usb@c5008000 {
sdhci@c8000000 {
status = "okay";
- power-gpios = <&gpio 86 0>; /* gpio PK6 */
+ power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 1>; /* gpio PI5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
power {
label = "Power";
- gpios = <&gpio 170 1>; /* gpio PV2, active low */
+ gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
lid {
label = "Lid";
- gpios = <&gpio 23 0>; /* gpio PC7 */
+ gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
regulator-name = "vdd_1v5";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&pmic 0 0>;
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
};
regulator@2 {
regulator-name = "vdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- gpio = <&pmic 1 0>;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&wm8903>;
- nvidia,spkr-en-gpios = <&wm8903 2 0>;
- nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */
+ nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
- clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi"
/ {
model = "Avionic Design Tamonten SOM";
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
- nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+ GPIO_ACTIVE_HIGH>;
};
};
pmic: tps6586x@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
- interrupts = <0 86 0x4>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
ti,system-power-controller;
};
sdhci@c8000600 {
- cd-gpios = <&gpio 58 1>; /* gpio PH2 */
- wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+ cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
status = "okay";
};
/dts-v1/;
-/include/ "tegra20-tamonten.dtsi"
+#include "tegra20-tamonten.dtsi"
/ {
model = "Avionic Design Tamonten Evaluation Carrier";
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = <187 0x04>;
+ interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&wm8903>;
- nvidia,spkr-en-gpios = <&wm8903 2 0>;
- nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+ GPIO_ACTIVE_HIGH>;
- clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
/dts-v1/;
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi"
/ {
model = "Compulab TrimSlice board";
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
- nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+ GPIO_ACTIVE_HIGH>;
};
};
usb@c5000000 {
status = "okay";
- nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
};
usb-phy@c5000000 {
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+ GPIO_ACTIVE_LOW>;
};
usb-phy@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+ GPIO_ACTIVE_LOW>;
};
usb@c5008000 {
sdhci@c8000600 {
status = "okay";
- cd-gpios = <&gpio 121 1>; /* gpio PP1 */
- wp-gpios = <&gpio 122 0>; /* gpio PP2 */
+ cd-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
power {
label = "Power";
- gpios = <&gpio 190 1>; /* gpio PX6, active low */
+ gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
poweroff {
compatible = "gpio-poweroff";
- gpios = <&gpio 191 1>; /* gpio PX7, active low */
+ gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
};
regulators {
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&codec>;
- clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
/dts-v1/;
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi"
/ {
model = "NVIDIA Tegra20 Ventana evaluation board";
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
- nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+ GPIO_ACTIVE_HIGH>;
};
};
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = <187 0x04>;
+ interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
compatible = "isil,isl29018";
reg = <0x44>;
interrupt-parent = <&gpio>;
- interrupts = <202 0x04>; /*gpio PZ2 */
+ interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
};
};
pmic: tps6586x@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
- interrupts = <0 86 0x4>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
ti,system-power-controller;
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+ GPIO_ACTIVE_LOW>;
};
usb-phy@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+ GPIO_ACTIVE_LOW>;
};
usb@c5008000 {
sdhci@c8000000 {
status = "okay";
- power-gpios = <&gpio 86 0>; /* gpio PK6 */
+ power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 1>; /* gpio PI5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
power {
label = "Power";
- gpios = <&gpio 170 1>; /* gpio PV2, active low */
+ gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
regulator-name = "vdd_1v5";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&pmic 0 0>;
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
};
regulator@2 {
regulator-name = "vdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- gpio = <&pmic 1 0>;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "vdd_pnl";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpio 22 0>; /* gpio PC6 */
+ gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "vdd_bl";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpio 176 0>; /* gpio PW0 */
+ gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&wm8903>;
- nvidia,spkr-en-gpios = <&wm8903 2 0>;
- nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
- nvidia,int-mic-en-gpios = <&gpio 184 0>; /* gpio PX0 */
- nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+ nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+ nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
+ GPIO_ACTIVE_HIGH>;
- clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
/dts-v1/;
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi"
/ {
model = "NVIDIA Tegra20 Whistler evaluation board";
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
- nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+ GPIO_ACTIVE_HIGH>;
};
};
max8907@3c {
compatible = "maxim,max8907";
reg = <0x3c>;
- interrupts = <0 86 0x4>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
maxim,system-power-controller;
usb@c5000000 {
status = "okay";
- nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
+ nvidia,vbus-gpio = <&tca6416 0 GPIO_ACTIVE_HIGH>;
};
usb-phy@c5000000 {
usb@c5008000 {
status = "okay";
- nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
+ nvidia,vbus-gpio = <&tca6416 1 GPIO_ACTIVE_HIGH>;
};
usb-phy@c5008000 {
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 1>; /* gpio PI5 */
- wp-gpios = <&gpio 173 0>; /* gpio PV5 */
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
bus-width = <8>;
};
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&codec>;
- clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
-/include/ "skeleton.dtsi"
+#include <dt-bindings/clock/tegra20-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
/ {
compatible = "nvidia,tegra20";
host1x {
compatible = "nvidia,tegra20-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
- interrupts = <0 65 0x04 /* mpcore syncpt */
- 0 67 0x04>; /* mpcore general */
- clocks = <&tegra_car 28>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+ clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
#address-cells = <1>;
#size-cells = <1>;
mpe {
compatible = "nvidia,tegra20-mpe";
reg = <0x54040000 0x00040000>;
- interrupts = <0 68 0x04>;
- clocks = <&tegra_car 60>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_MPE>;
};
vi {
compatible = "nvidia,tegra20-vi";
reg = <0x54080000 0x00040000>;
- interrupts = <0 69 0x04>;
- clocks = <&tegra_car 100>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_VI>;
};
epp {
compatible = "nvidia,tegra20-epp";
reg = <0x540c0000 0x00040000>;
- interrupts = <0 70 0x04>;
- clocks = <&tegra_car 19>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_EPP>;
};
isp {
compatible = "nvidia,tegra20-isp";
reg = <0x54100000 0x00040000>;
- interrupts = <0 71 0x04>;
- clocks = <&tegra_car 23>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_ISP>;
};
gr2d {
compatible = "nvidia,tegra20-gr2d";
reg = <0x54140000 0x00040000>;
- interrupts = <0 72 0x04>;
- clocks = <&tegra_car 21>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_GR2D>;
};
gr3d {
compatible = "nvidia,tegra20-gr3d";
reg = <0x54180000 0x00040000>;
- clocks = <&tegra_car 24>;
+ clocks = <&tegra_car TEGRA20_CLK_GR3D>;
};
dc@54200000 {
compatible = "nvidia,tegra20-dc";
reg = <0x54200000 0x00040000>;
- interrupts = <0 73 0x04>;
- clocks = <&tegra_car 27>, <&tegra_car 121>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_DISP1>,
+ <&tegra_car TEGRA20_CLK_PLL_P>;
clock-names = "disp1", "parent";
rgb {
dc@54240000 {
compatible = "nvidia,tegra20-dc";
reg = <0x54240000 0x00040000>;
- interrupts = <0 74 0x04>;
- clocks = <&tegra_car 26>, <&tegra_car 121>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_DISP2>,
+ <&tegra_car TEGRA20_CLK_PLL_P>;
clock-names = "disp2", "parent";
rgb {
hdmi {
compatible = "nvidia,tegra20-hdmi";
reg = <0x54280000 0x00040000>;
- interrupts = <0 75 0x04>;
- clocks = <&tegra_car 51>, <&tegra_car 117>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+ <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
clock-names = "hdmi", "parent";
status = "disabled";
};
tvo {
compatible = "nvidia,tegra20-tvo";
reg = <0x542c0000 0x00040000>;
- interrupts = <0 76 0x04>;
- clocks = <&tegra_car 102>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_TVO>;
status = "disabled";
};
dsi {
compatible = "nvidia,tegra20-dsi";
reg = <0x54300000 0x00040000>;
- clocks = <&tegra_car 48>;
+ clocks = <&tegra_car TEGRA20_CLK_DSI>;
status = "disabled";
};
};
timer@50004600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
- interrupts = <1 13 0x304>;
- clocks = <&tegra_car 132>;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&tegra_car TEGRA20_CLK_TWD>;
};
intc: interrupt-controller {
timer@60005000 {
compatible = "nvidia,tegra20-timer";
reg = <0x60005000 0x60>;
- interrupts = <0 0 0x04
- 0 1 0x04
- 0 41 0x04
- 0 42 0x04>;
- clocks = <&tegra_car 5>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_TIMER>;
};
tegra_car: clock {
apbdma: dma {
compatible = "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1200>;
- interrupts = <0 104 0x04
- 0 105 0x04
- 0 106 0x04
- 0 107 0x04
- 0 108 0x04
- 0 109 0x04
- 0 110 0x04
- 0 111 0x04
- 0 112 0x04
- 0 113 0x04
- 0 114 0x04
- 0 115 0x04
- 0 116 0x04
- 0 117 0x04
- 0 118 0x04
- 0 119 0x04>;
- clocks = <&tegra_car 34>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_APBDMA>;
};
ahb {
gpio: gpio {
compatible = "nvidia,tegra20-gpio";
reg = <0x6000d000 0x1000>;
- interrupts = <0 32 0x04
- 0 33 0x04
- 0 34 0x04
- 0 35 0x04
- 0 55 0x04
- 0 87 0x04
- 0 89 0x04>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
tegra_ac97: ac97 {
compatible = "nvidia,tegra20-ac97";
reg = <0x70002000 0x200>;
- interrupts = <0 81 0x04>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 12>;
- clocks = <&tegra_car 3>;
+ clocks = <&tegra_car TEGRA20_CLK_AC97>;
status = "disabled";
};
tegra_i2s1: i2s@70002800 {
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
- interrupts = <0 13 0x04>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 2>;
- clocks = <&tegra_car 11>;
+ clocks = <&tegra_car TEGRA20_CLK_I2S1>;
status = "disabled";
};
tegra_i2s2: i2s@70002a00 {
compatible = "nvidia,tegra20-i2s";
reg = <0x70002a00 0x200>;
- interrupts = <0 3 0x04>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 1>;
- clocks = <&tegra_car 18>;
+ clocks = <&tegra_car TEGRA20_CLK_I2S2>;
status = "disabled";
};
compatible = "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
- interrupts = <0 36 0x04>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 8>;
- clocks = <&tegra_car 6>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTA>;
status = "disabled";
};
compatible = "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
- interrupts = <0 37 0x04>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 9>;
- clocks = <&tegra_car 96>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTB>;
status = "disabled";
};
compatible = "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
- interrupts = <0 46 0x04>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 10>;
- clocks = <&tegra_car 55>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTC>;
status = "disabled";
};
compatible = "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
- interrupts = <0 90 0x04>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 19>;
- clocks = <&tegra_car 65>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTD>;
status = "disabled";
};
compatible = "nvidia,tegra20-uart";
reg = <0x70006400 0x100>;
reg-shift = <2>;
- interrupts = <0 91 0x04>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 20>;
- clocks = <&tegra_car 66>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTE>;
status = "disabled";
};
compatible = "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
- clocks = <&tegra_car 17>;
+ clocks = <&tegra_car TEGRA20_CLK_PWM>;
status = "disabled";
};
rtc {
compatible = "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
- interrupts = <0 2 0x04>;
- clocks = <&tegra_car 4>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_RTC>;
};
i2c@7000c000 {
compatible = "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;
- interrupts = <0 38 0x04>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 12>, <&tegra_car 124>;
+ clocks = <&tegra_car TEGRA20_CLK_I2C1>,
+ <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
spi@7000c380 {
compatible = "nvidia,tegra20-sflash";
reg = <0x7000c380 0x80>;
- interrupts = <0 39 0x04>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 11>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 43>;
+ clocks = <&tegra_car TEGRA20_CLK_SPI>;
status = "disabled";
};
i2c@7000c400 {
compatible = "nvidia,tegra20-i2c";
reg = <0x7000c400 0x100>;
- interrupts = <0 84 0x04>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 54>, <&tegra_car 124>;
+ clocks = <&tegra_car TEGRA20_CLK_I2C2>,
+ <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
i2c@7000c500 {
compatible = "nvidia,tegra20-i2c";
reg = <0x7000c500 0x100>;
- interrupts = <0 92 0x04>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 67>, <&tegra_car 124>;
+ clocks = <&tegra_car TEGRA20_CLK_I2C3>,
+ <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
i2c@7000d000 {
compatible = "nvidia,tegra20-i2c-dvc";
reg = <0x7000d000 0x200>;
- interrupts = <0 53 0x04>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 47>, <&tegra_car 124>;
+ clocks = <&tegra_car TEGRA20_CLK_DVC>,
+ <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
spi@7000d400 {
compatible = "nvidia,tegra20-slink";
reg = <0x7000d400 0x200>;
- interrupts = <0 59 0x04>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 41>;
+ clocks = <&tegra_car TEGRA20_CLK_SBC1>;
status = "disabled";
};
spi@7000d600 {
compatible = "nvidia,tegra20-slink";
reg = <0x7000d600 0x200>;
- interrupts = <0 82 0x04>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 44>;
+ clocks = <&tegra_car TEGRA20_CLK_SBC2>;
status = "disabled";
};
spi@7000d800 {
compatible = "nvidia,tegra20-slink";
reg = <0x7000d800 0x200>;
- interrupts = <0 83 0x04>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 46>;
+ clocks = <&tegra_car TEGRA20_CLK_SBC3>;
status = "disabled";
};
spi@7000da00 {
compatible = "nvidia,tegra20-slink";
reg = <0x7000da00 0x200>;
- interrupts = <0 93 0x04>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 68>;
+ clocks = <&tegra_car TEGRA20_CLK_SBC4>;
status = "disabled";
};
kbc {
compatible = "nvidia,tegra20-kbc";
reg = <0x7000e200 0x100>;
- interrupts = <0 85 0x04>;
- clocks = <&tegra_car 36>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_KBC>;
status = "disabled";
};
pmc {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
- clocks = <&tegra_car 110>, <&clk32k_in>;
+ clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
};
compatible = "nvidia,tegra20-mc";
reg = <0x7000f000 0x024
0x7000f03c 0x3c4>;
- interrupts = <0 77 0x04>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
};
iommu {
usb@c5000000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5000000 0x4000>;
- interrupts = <0 20 0x04>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
nvidia,has-legacy-mode;
- clocks = <&tegra_car 22>;
+ clocks = <&tegra_car TEGRA20_CLK_USBD>;
nvidia,needs-double-reset;
nvidia,phy = <&phy1>;
status = "disabled";
compatible = "nvidia,tegra20-usb-phy";
reg = <0xc5000000 0x4000 0xc5000000 0x4000>;
phy_type = "utmi";
- clocks = <&tegra_car 22>,
- <&tegra_car 127>,
- <&tegra_car 106>,
- <&tegra_car 22>;
+ clocks = <&tegra_car TEGRA20_CLK_USBD>,
+ <&tegra_car TEGRA20_CLK_PLL_U>,
+ <&tegra_car TEGRA20_CLK_CLK_M>,
+ <&tegra_car TEGRA20_CLK_USBD>;
clock-names = "reg", "pll_u", "timer", "utmi-pads";
nvidia,has-legacy-mode;
hssync_start_delay = <9>;
usb@c5004000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5004000 0x4000>;
- interrupts = <0 21 0x04>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "ulpi";
- clocks = <&tegra_car 58>;
+ clocks = <&tegra_car TEGRA20_CLK_USB2>;
nvidia,phy = <&phy2>;
status = "disabled";
};
compatible = "nvidia,tegra20-usb-phy";
reg = <0xc5004000 0x4000>;
phy_type = "ulpi";
- clocks = <&tegra_car 58>,
- <&tegra_car 127>,
- <&tegra_car 93>;
+ clocks = <&tegra_car TEGRA20_CLK_USB2>,
+ <&tegra_car TEGRA20_CLK_PLL_U>,
+ <&tegra_car TEGRA20_CLK_CDEV2>;
clock-names = "reg", "pll_u", "ulpi-link";
status = "disabled";
};
usb@c5008000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5008000 0x4000>;
- interrupts = <0 97 0x04>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
- clocks = <&tegra_car 59>;
+ clocks = <&tegra_car TEGRA20_CLK_USB3>;
nvidia,phy = <&phy3>;
status = "disabled";
};
compatible = "nvidia,tegra20-usb-phy";
reg = <0xc5008000 0x4000 0xc5000000 0x4000>;
phy_type = "utmi";
- clocks = <&tegra_car 59>,
- <&tegra_car 127>,
- <&tegra_car 106>,
- <&tegra_car 22>;
+ clocks = <&tegra_car TEGRA20_CLK_USB3>,
+ <&tegra_car TEGRA20_CLK_PLL_U>,
+ <&tegra_car TEGRA20_CLK_CLK_M>,
+ <&tegra_car TEGRA20_CLK_USBD>;
clock-names = "reg", "pll_u", "timer", "utmi-pads";
hssync_start_delay = <9>;
idle_wait_delay = <17>;
sdhci@c8000000 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000000 0x200>;
- interrupts = <0 14 0x04>;
- clocks = <&tegra_car 14>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
status = "disabled";
};
sdhci@c8000200 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000200 0x200>;
- interrupts = <0 15 0x04>;
- clocks = <&tegra_car 9>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_SDMMC2>;
status = "disabled";
};
sdhci@c8000400 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000400 0x200>;
- interrupts = <0 19 0x04>;
- clocks = <&tegra_car 69>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_SDMMC3>;
status = "disabled";
};
sdhci@c8000600 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000600 0x200>;
- interrupts = <0 31 0x04>;
- clocks = <&tegra_car 15>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_SDMMC4>;
status = "disabled";
};
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 56 0x04
- 0 57 0x04>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
};
};
/dts-v1/;
-/include/ "tegra30.dtsi"
+#include "tegra30.dtsi"
/ {
model = "NVIDIA Tegra30 Beaver evaluation board";
compatible = "nvidia,beaver", "nvidia,tegra30";
memory {
- reg = <0x80000000 0x80000000>;
+ reg = <0x80000000 0x7ff00000>;
};
pinmux {
status = "okay";
clock-frequency = <100000>;
+ rt5640: rt5640 {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+ realtek,ldo1-en-gpios =
+ <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+ };
+
tps62361 {
compatible = "ti,tps62361";
reg = <0x60>;
compatible = "ti,tps65911";
reg = <0x2d>;
- interrupts = <0 86 0x4>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
sdhci@78000000 {
status = "okay";
- cd-gpios = <&gpio 69 1>; /* gpio PI5 */
- wp-gpios = <&gpio 155 0>; /* gpio PT3 */
- power-gpios = <&gpio 31 0>; /* gpio PD7 */
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
regulator-boot-on;
regulator-always-on;
enable-active-high;
- gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
};
ddr_reg: regulator@2 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&pmic 7 0>; /* PMIC TPS65911 GPIO7 */
+ gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
vin-supply = <&vdd_5v_in_reg>;
};
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio 30 0>; /* gpio PD6 */
+ gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
vin-supply = <&vdd_5v_in_reg>;
};
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 68 0>; /* GPIO PI4 */
+ gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v_in_reg>;
};
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 63 0>; /* GPIO PH7 */
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v_in_reg>;
};
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&pmic 6 0>; /* PMIC TPS65911 GPIO6 */
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
vin-supply = <&vdd_5v_in_reg>;
};
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio 95 0>; /* gpio PL7 */
+ gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
};
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ gpled1 {
+ label = "LED1"; /* CR5A1 (blue) */
+ gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
+ };
+ gpled2 {
+ label = "LED2"; /* CR4A2 (green) */
+ gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-rt5640-beaver",
+ "nvidia,tegra-audio-rt5640";
+ nvidia,model = "NVIDIA Tegra Beaver";
+
+ nvidia,audio-routing =
+ "Headphones", "HPOR",
+ "Headphones", "HPOL";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&rt5640>;
+
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+
+ clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+ <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA30_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+ };
};
/dts-v1/;
-/include/ "tegra30-cardhu.dtsi"
+#include "tegra30-cardhu.dtsi"
/* This dts file support the cardhu A02 version of board */
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&pmic 6 0>;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
};
sys_3v3_reg: regulator@101 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&pmic 7 0>;
+ gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
};
usb1_vbus_reg: regulator@102 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 68 0>; /* GPIO PI4 */
+ gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 63 0>; /* GPIO PH7 */
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&pmic 2 0>;
+ gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
};
vdd_bl_reg: regulator@105 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio 83 0>; /* GPIO PK3 */
+ gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
};
};
sdhci@78000400 {
status = "okay";
- power-gpios = <&gpio 28 0>; /* gpio PD4 */
+ power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};
/dts-v1/;
-/include/ "tegra30-cardhu.dtsi"
+#include "tegra30-cardhu.dtsi"
/* This dts file support the cardhu A04 and later versions of board */
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&pmic 7 0>;
+ gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
};
sys_3v3_reg: regulator@101 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&pmic 6 0>;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
};
usb1_vbus_reg: regulator@102 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 238 0>; /* GPIO PDD6 */
+ gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 236 0>; /* GPIO PDD4 */
+ gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&pmic 8 0>;
+ gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
};
vdd_bl_reg: regulator@105 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio 234 0>; /* GPIO PDD2 */
+ gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
};
vdd_bl2_reg: regulator@106 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio 232 0>; /* GPIO PDD0 */
+ gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
};
};
sdhci@78000400 {
status = "okay";
- power-gpios = <&gpio 27 0>; /* gpio PD3 */
+ power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};
-/include/ "tegra30.dtsi"
+#include "tegra30.dtsi"
/**
* This file contains common DT entry for all fab version of Cardhu.
compatible = "isil,isl29028";
reg = <0x44>;
interrupt-parent = <&gpio>;
- interrupts = <88 0x04>; /*gpio PL0 */
+ interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
};
};
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = <179 0x04>; /* gpio PW3 */
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
compatible = "ti,tps65911";
reg = <0x2d>;
- interrupts = <0 86 0x4>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
sdhci@78000000 {
status = "okay";
- cd-gpios = <&gpio 69 1>; /* gpio PI5 */
- wp-gpios = <&gpio 155 0>; /* gpio PT3 */
- power-gpios = <&gpio 31 0>; /* gpio PD7 */
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
- gpio = <&gpio 220 0>; /* gpio PBB4 */
+ gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
vin-supply = <&vio_reg>;
};
regulator-boot-on;
regulator-always-on;
enable-active-high;
- gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
};
emmc_3v3_reg: regulator@3 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio 25 0>; /* gpio PD1 */
+ gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&gpio 30 0>; /* gpio PD6 */
+ gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
};
pex_hvdd_3v3_reg: regulator@5 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&gpio 95 0>; /* gpio PL7 */
+ gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
enable-active-high;
- gpio = <&gpio 142 0>; /* gpio PR6 */
+ gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
enable-active-high;
- gpio = <&gpio 143 0>; /* gpio PR7 */
+ gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&gpio 144 0>; /* gpio PS0 */
+ gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio 24 0>; /* gpio PD0 */
+ gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&gpio 94 0>; /* gpio PL6 */
+ gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio 92 0>; /* gpio PL4 */
+ gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 152 0>; /* GPIO PT0 */
+ gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&wm8903>;
- nvidia,spkr-en-gpios = <&wm8903 2 0>;
- nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+ GPIO_ACTIVE_HIGH>;
- clocks = <&tegra_car 184>, <&tegra_car 185>, <&tegra_car 120>;
+ clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+ <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA30_CLK_EXTERN1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
-/include/ "skeleton.dtsi"
+#include <dt-bindings/clock/tegra30-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
/ {
compatible = "nvidia,tegra30";
host1x {
compatible = "nvidia,tegra30-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
- interrupts = <0 65 0x04 /* mpcore syncpt */
- 0 67 0x04>; /* mpcore general */
- clocks = <&tegra_car 28>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+ clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
#address-cells = <1>;
#size-cells = <1>;
mpe {
compatible = "nvidia,tegra30-mpe";
reg = <0x54040000 0x00040000>;
- interrupts = <0 68 0x04>;
- clocks = <&tegra_car 60>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_MPE>;
};
vi {
compatible = "nvidia,tegra30-vi";
reg = <0x54080000 0x00040000>;
- interrupts = <0 69 0x04>;
- clocks = <&tegra_car 164>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_VI>;
};
epp {
compatible = "nvidia,tegra30-epp";
reg = <0x540c0000 0x00040000>;
- interrupts = <0 70 0x04>;
- clocks = <&tegra_car 19>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_EPP>;
};
isp {
compatible = "nvidia,tegra30-isp";
reg = <0x54100000 0x00040000>;
- interrupts = <0 71 0x04>;
- clocks = <&tegra_car 23>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_ISP>;
};
gr2d {
compatible = "nvidia,tegra30-gr2d";
reg = <0x54140000 0x00040000>;
- interrupts = <0 72 0x04>;
- clocks = <&tegra_car 21>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_GR2D>;
};
gr3d {
dc@54200000 {
compatible = "nvidia,tegra30-dc";
reg = <0x54200000 0x00040000>;
- interrupts = <0 73 0x04>;
- clocks = <&tegra_car 27>, <&tegra_car 179>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_DISP1>,
+ <&tegra_car TEGRA30_CLK_PLL_P>;
clock-names = "disp1", "parent";
rgb {
dc@54240000 {
compatible = "nvidia,tegra30-dc";
reg = <0x54240000 0x00040000>;
- interrupts = <0 74 0x04>;
- clocks = <&tegra_car 26>, <&tegra_car 179>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_DISP2>,
+ <&tegra_car TEGRA30_CLK_PLL_P>;
clock-names = "disp2", "parent";
rgb {
hdmi {
compatible = "nvidia,tegra30-hdmi";
reg = <0x54280000 0x00040000>;
- interrupts = <0 75 0x04>;
- clocks = <&tegra_car 51>, <&tegra_car 189>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_HDMI>,
+ <&tegra_car TEGRA30_CLK_PLL_D2_OUT0>;
clock-names = "hdmi", "parent";
status = "disabled";
};
tvo {
compatible = "nvidia,tegra30-tvo";
reg = <0x542c0000 0x00040000>;
- interrupts = <0 76 0x04>;
- clocks = <&tegra_car 169>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_TVO>;
status = "disabled";
};
dsi {
compatible = "nvidia,tegra30-dsi";
reg = <0x54300000 0x00040000>;
- clocks = <&tegra_car 48>;
+ clocks = <&tegra_car TEGRA30_CLK_DSIA>;
status = "disabled";
};
};
timer@50004600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
- interrupts = <1 13 0xf04>;
- clocks = <&tegra_car 214>;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&tegra_car TEGRA30_CLK_TWD>;
};
intc: interrupt-controller {
timer@60005000 {
compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
reg = <0x60005000 0x400>;
- interrupts = <0 0 0x04
- 0 1 0x04
- 0 41 0x04
- 0 42 0x04
- 0 121 0x04
- 0 122 0x04>;
- clocks = <&tegra_car 5>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_TIMER>;
};
tegra_car: clock {
apbdma: dma {
compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1400>;
- interrupts = <0 104 0x04
- 0 105 0x04
- 0 106 0x04
- 0 107 0x04
- 0 108 0x04
- 0 109 0x04
- 0 110 0x04
- 0 111 0x04
- 0 112 0x04
- 0 113 0x04
- 0 114 0x04
- 0 115 0x04
- 0 116 0x04
- 0 117 0x04
- 0 118 0x04
- 0 119 0x04
- 0 128 0x04
- 0 129 0x04
- 0 130 0x04
- 0 131 0x04
- 0 132 0x04
- 0 133 0x04
- 0 134 0x04
- 0 135 0x04
- 0 136 0x04
- 0 137 0x04
- 0 138 0x04
- 0 139 0x04
- 0 140 0x04
- 0 141 0x04
- 0 142 0x04
- 0 143 0x04>;
- clocks = <&tegra_car 34>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_APBDMA>;
};
ahb: ahb {
gpio: gpio {
compatible = "nvidia,tegra30-gpio";
reg = <0x6000d000 0x1000>;
- interrupts = <0 32 0x04
- 0 33 0x04
- 0 34 0x04
- 0 35 0x04
- 0 55 0x04
- 0 87 0x04
- 0 89 0x04
- 0 125 0x04>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
- interrupts = <0 36 0x04>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 8>;
- clocks = <&tegra_car 6>;
+ clocks = <&tegra_car TEGRA30_CLK_UARTA>;
status = "disabled";
};
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
- interrupts = <0 37 0x04>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 9>;
- clocks = <&tegra_car 160>;
+ clocks = <&tegra_car TEGRA30_CLK_UARTB>;
status = "disabled";
};
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
- interrupts = <0 46 0x04>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 10>;
- clocks = <&tegra_car 55>;
+ clocks = <&tegra_car TEGRA30_CLK_UARTC>;
status = "disabled";
};
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
- interrupts = <0 90 0x04>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 19>;
- clocks = <&tegra_car 65>;
+ clocks = <&tegra_car TEGRA30_CLK_UARTD>;
status = "disabled";
};
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006400 0x100>;
reg-shift = <2>;
- interrupts = <0 91 0x04>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 20>;
- clocks = <&tegra_car 66>;
+ clocks = <&tegra_car TEGRA30_CLK_UARTE>;
status = "disabled";
};
compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
- clocks = <&tegra_car 17>;
+ clocks = <&tegra_car TEGRA30_CLK_PWM>;
status = "disabled";
};
rtc {
compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
- interrupts = <0 2 0x04>;
- clocks = <&tegra_car 4>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_RTC>;
};
i2c@7000c000 {
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;
- interrupts = <0 38 0x04>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 12>, <&tegra_car 182>;
+ clocks = <&tegra_car TEGRA30_CLK_I2C1>,
+ <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
i2c@7000c400 {
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c400 0x100>;
- interrupts = <0 84 0x04>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 54>, <&tegra_car 182>;
+ clocks = <&tegra_car TEGRA30_CLK_I2C2>,
+ <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
i2c@7000c500 {
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c500 0x100>;
- interrupts = <0 92 0x04>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 67>, <&tegra_car 182>;
+ clocks = <&tegra_car TEGRA30_CLK_I2C3>,
+ <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
i2c@7000c700 {
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c700 0x100>;
- interrupts = <0 120 0x04>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 103>, <&tegra_car 182>;
+ clocks = <&tegra_car TEGRA30_CLK_I2C4>,
+ <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
i2c@7000d000 {
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000d000 0x100>;
- interrupts = <0 53 0x04>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 47>, <&tegra_car 182>;
+ clocks = <&tegra_car TEGRA30_CLK_I2C5>,
+ <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
status = "disabled";
};
spi@7000d400 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d400 0x200>;
- interrupts = <0 59 0x04>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 41>;
+ clocks = <&tegra_car TEGRA30_CLK_SBC1>;
status = "disabled";
};
spi@7000d600 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d600 0x200>;
- interrupts = <0 82 0x04>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 44>;
+ clocks = <&tegra_car TEGRA30_CLK_SBC2>;
status = "disabled";
};
spi@7000d800 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d800 0x200>;
- interrupts = <0 83 0x04>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 46>;
+ clocks = <&tegra_car TEGRA30_CLK_SBC3>;
status = "disabled";
};
spi@7000da00 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000da00 0x200>;
- interrupts = <0 93 0x04>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 68>;
+ clocks = <&tegra_car TEGRA30_CLK_SBC4>;
status = "disabled";
};
spi@7000dc00 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000dc00 0x200>;
- interrupts = <0 94 0x04>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 27>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 104>;
+ clocks = <&tegra_car TEGRA30_CLK_SBC5>;
status = "disabled";
};
spi@7000de00 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000de00 0x200>;
- interrupts = <0 79 0x04>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 28>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&tegra_car 105>;
+ clocks = <&tegra_car TEGRA30_CLK_SBC6>;
status = "disabled";
};
kbc {
compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc";
reg = <0x7000e200 0x100>;
- interrupts = <0 85 0x04>;
- clocks = <&tegra_car 36>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_KBC>;
status = "disabled";
};
pmc {
compatible = "nvidia,tegra30-pmc";
reg = <0x7000e400 0x400>;
- clocks = <&tegra_car 218>, <&clk32k_in>;
+ clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
};
0x7000f03c 0x1b4
0x7000f200 0x028
0x7000f284 0x17c>;
- interrupts = <0 77 0x04>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
};
iommu {
compatible = "nvidia,tegra30-ahub";
reg = <0x70080000 0x200
0x70080200 0x100>;
- interrupts = <0 103 0x04>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 1>;
- clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
- <&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>,
- <&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>,
- <&tegra_car 110>, <&tegra_car 162>;
+ clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>,
+ <&tegra_car TEGRA30_CLK_APBIF>,
+ <&tegra_car TEGRA30_CLK_I2S0>,
+ <&tegra_car TEGRA30_CLK_I2S1>,
+ <&tegra_car TEGRA30_CLK_I2S2>,
+ <&tegra_car TEGRA30_CLK_I2S3>,
+ <&tegra_car TEGRA30_CLK_I2S4>,
+ <&tegra_car TEGRA30_CLK_DAM0>,
+ <&tegra_car TEGRA30_CLK_DAM1>,
+ <&tegra_car TEGRA30_CLK_DAM2>,
+ <&tegra_car TEGRA30_CLK_SPDIF_IN>;
clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
"i2s3", "i2s4", "dam0", "dam1", "dam2",
"spdif_in";
compatible = "nvidia,tegra30-i2s";
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
- clocks = <&tegra_car 30>;
+ clocks = <&tegra_car TEGRA30_CLK_I2S0>;
status = "disabled";
};
compatible = "nvidia,tegra30-i2s";
reg = <0x70080400 0x100>;
nvidia,ahub-cif-ids = <5 5>;
- clocks = <&tegra_car 11>;
+ clocks = <&tegra_car TEGRA30_CLK_I2S1>;
status = "disabled";
};
compatible = "nvidia,tegra30-i2s";
reg = <0x70080500 0x100>;
nvidia,ahub-cif-ids = <6 6>;
- clocks = <&tegra_car 18>;
+ clocks = <&tegra_car TEGRA30_CLK_I2S2>;
status = "disabled";
};
compatible = "nvidia,tegra30-i2s";
reg = <0x70080600 0x100>;
nvidia,ahub-cif-ids = <7 7>;
- clocks = <&tegra_car 101>;
+ clocks = <&tegra_car TEGRA30_CLK_I2S3>;
status = "disabled";
};
compatible = "nvidia,tegra30-i2s";
reg = <0x70080700 0x100>;
nvidia,ahub-cif-ids = <8 8>;
- clocks = <&tegra_car 102>;
+ clocks = <&tegra_car TEGRA30_CLK_I2S4>;
status = "disabled";
};
};
sdhci@78000000 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000000 0x200>;
- interrupts = <0 14 0x04>;
- clocks = <&tegra_car 14>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
status = "disabled";
};
sdhci@78000200 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000200 0x200>;
- interrupts = <0 15 0x04>;
- clocks = <&tegra_car 9>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_SDMMC2>;
status = "disabled";
};
sdhci@78000400 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000400 0x200>;
- interrupts = <0 19 0x04>;
- clocks = <&tegra_car 69>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
status = "disabled";
};
sdhci@78000600 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000600 0x200>;
- interrupts = <0 31 0x04>;
- clocks = <&tegra_car 15>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_SDMMC4>;
status = "disabled";
};
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 144 0x04
- 0 145 0x04
- 0 146 0x04
- 0 147 0x04>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
};
};
--- /dev/null
+/*
+ * Copyright (C) 2013 Linaro, Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&twl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&twl4030_pins>;
+};
+
+&omap3_pmx_core {
+ /*
+ * On most OMAP3 platforms, the twl4030 IRQ line is connected
+ * to the SYS_NIRQ line on OMAP. Therefore, configure the
+ * defaults for the SYS_NIRQ pin here.
+ */
+ twl4030_pins: pinmux_twl4030_pins {
+ pinctrl-single,pins = <
+ 0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+ >;
+ };
+};
memory {
reg = <0x20000000 0x4000000>;
};
+
+ ahb {
+ apb {
+ shdwc@fffffd10 {
+ atmel,wakeup-counter = <10>;
+ atmel,wakeup-rtt-timer;
+ };
+ };
+ };
};
status = "okay";
};
+ spi0: spi@fffa4000 {
+ cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ mtd_dataflash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ reg = <0>;
+ spi-max-frequency = <15000000>;
+ };
+ };
+
+ shdwc@fffffd10 {
+ atmel,wakeup-counter = <10>;
+ atmel,wakeup-rtt-timer;
+ };
};
nand0: nand@40000000 {
* Licensed under GPLv2 or later.
*/
/dts-v1/;
-#include "at91sam9g20.dtsi"
-#include "usb_a9260_common.dtsi"
+#include "usb_a9g20_common.dtsi"
/ {
model = "Calao USB A9G20";
compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
-
- chosen {
- bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
- };
-
- memory {
- reg = <0x20000000 0x4000000>;
- };
-
- i2c@0 {
- rv3029c2@56 {
- compatible = "rv3029c2";
- reg = <0x56>;
- };
- };
};
--- /dev/null
+/*
+ * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ i2c@0 {
+ rv3029c2@56 {
+ compatible = "rv3029c2";
+ reg = <0x56>;
+ };
+ };
+};
--- /dev/null
+/*
+ * usb_a9g20_lpw.dts - Device Tree file for Caloa USB A9G20 Low Power board
+ *
+ * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "usb_a9g20_common.dtsi"
+
+/ {
+ model = "Calao USB A9G20 Low Power";
+ compatible = "calao,usb-a9g20-lpw", "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ ahb {
+ apb {
+ spi1: spi@fffcc000 {
+ cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ mmc-slot@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ voltage-ranges = <3200 3400>;
+ spi-max-frequency = <25000000>;
+ interrupt-parent = <&pioC>;
+ interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
+ };
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_VF610_PINFUNC_H
+#define __DTS_VF610_PINFUNC_H
+
+/*
+ * The pin function ID for VF610 is a tuple of:
+ * <mux_reg input_reg mux_mode input_val>
+ */
+
+#define ALT0 0x0
+#define ALT1 0x1
+#define ALT2 0x2
+#define ALT3 0x3
+#define ALT4 0x4
+#define ALT5 0x5
+#define ALT6 0x6
+#define ALT7 0x7
+
+
+#define VF610_PAD_PTA6__GPIO_0 0x000 0x000 ALT0 0x0
+#define VF610_PAD_PTA6__RMII_CLKOUT 0x000 0x000 ALT1 0x0
+#define VF610_PAD_PTA6__RMII_CLKIN 0x000 0x2F0 ALT2 0x0
+#define VF610_PAD_PTA6__DCU1_TCON11 0x000 0x000 ALT4 0x0
+#define VF610_PAD_PTA6__DCU1_R2 0x000 0x000 ALT7 0x0
+#define VF610_PAD_PTA8__GPIO_1 0x004 0x000 ALT0 0x0
+#define VF610_PAD_PTA8__TCLK 0x004 0x000 ALT1 0x0
+#define VF610_PAD_PTA8__DCU0_R0 0x004 0x000 ALT4 0x0
+#define VF610_PAD_PTA8__MLB_CLK 0x004 0x354 ALT7 0x0
+#define VF610_PAD_PTA9__GPIO_2 0x008 0x000 ALT0 0x0
+#define VF610_PAD_PTA9__TDI 0x008 0x000 ALT1 0x0
+#define VF610_PAD_PTA9__RMII_CLKOUT 0x008 0x000 ALT2 0x0
+#define VF610_PAD_PTA9__RMII_CLKIN 0x008 0x2F0 ALT3 0x1
+#define VF610_PAD_PTA9__DCU0_R1 0x008 0x000 ALT4 0x0
+#define VF610_PAD_PTA9__WDOG_B 0x008 0x000 ALT6 0x0
+#define VF610_PAD_PTA10__GPIO_3 0x00C 0x000 ALT0 0x0
+#define VF610_PAD_PTA10__TDO 0x00C 0x000 ALT1 0x0
+#define VF610_PAD_PTA10__EXT_AUDIO_MCLK 0x00C 0x2EC ALT2 0x0
+#define VF610_PAD_PTA10__DCU0_G0 0x00C 0x000 ALT4 0x0
+#define VF610_PAD_PTA10__ENET_TS_CLKIN 0x00C 0x2F4 ALT6 0x0
+#define VF610_PAD_PTA10__MLB_SIGNAL 0x00C 0x35C ALT7 0x0
+#define VF610_PAD_PTA11__GPIO_4 0x010 0x000 ALT0 0x0
+#define VF610_PAD_PTA11__TMS 0x010 0x000 ALT1 0x0
+#define VF610_PAD_PTA11__DCU0_G1 0x010 0x000 ALT4 0x0
+#define VF610_PAD_PTA11__MLB_DATA 0x010 0x358 ALT7 0x0
+#define VF610_PAD_PTA12__GPIO_5 0x014 0x000 ALT0 0x0
+#define VF610_PAD_PTA12__TRACECK 0x014 0x000 ALT1 0x0
+#define VF610_PAD_PTA12__EXT_AUDIO_MCLK 0x014 0x2EC ALT2 0x1
+#define VF610_PAD_PTA12__VIU_DATA13 0x014 0x000 ALT6 0x0
+#define VF610_PAD_PTA12__I2C0_SCL 0x014 0x33C ALT7 0x0
+#define VF610_PAD_PTA16__GPIO_6 0x018 0x000 ALT0 0x0
+#define VF610_PAD_PTA16__TRACED0 0x018 0x000 ALT1 0x0
+#define VF610_PAD_PTA16__USB0_VBUS_EN 0x018 0x000 ALT2 0x0
+#define VF610_PAD_PTA16__ADC1_SE0 0x018 0x000 ALT3 0x0
+#define VF610_PAD_PTA16__LCD29 0x018 0x000 ALT4 0x0
+#define VF610_PAD_PTA16__SAI2_TX_BCLK 0x018 0x370 ALT5 0x0
+#define VF610_PAD_PTA16__VIU_DATA14 0x018 0x000 ALT6 0x0
+#define VF610_PAD_PTA16__I2C0_SDA 0x018 0x340 ALT7 0x0
+#define VF610_PAD_PTA17__GPIO_7 0x01C 0x000 ALT0 0x0
+#define VF610_PAD_PTA17__TRACED1 0x01C 0x000 ALT1 0x0
+#define VF610_PAD_PTA17__USB0_VBUS_OC 0x01C 0x000 ALT2 0x0
+#define VF610_PAD_PTA17__ADC1_SE1 0x01C 0x000 ALT3 0x0
+#define VF610_PAD_PTA17__LCD30 0x01C 0x000 ALT4 0x0
+#define VF610_PAD_PTA17__USB0_SOF_PULSE 0x01C 0x000 ALT5 0x0
+#define VF610_PAD_PTA17__VIU_DATA15 0x01C 0x000 ALT6 0x0
+#define VF610_PAD_PTA17__I2C1_SCL 0x01C 0x344 ALT7 0x0
+#define VF610_PAD_PTA18__GPIO_8 0x020 0x000 ALT0 0x0
+#define VF610_PAD_PTA18__TRACED2 0x020 0x000 ALT1 0x0
+#define VF610_PAD_PTA18__ADC0_SE0 0x020 0x000 ALT2 0x0
+#define VF610_PAD_PTA18__FTM1_QD_PHA 0x020 0x334 ALT3 0x0
+#define VF610_PAD_PTA18__LCD31 0x020 0x000 ALT4 0x0
+#define VF610_PAD_PTA18__SAI2_TX_DATA 0x020 0x000 ALT5 0x0
+#define VF610_PAD_PTA18__VIU_DATA16 0x020 0x000 ALT6 0x0
+#define VF610_PAD_PTA18__I2C1_SDA 0x020 0x348 ALT7 0x0
+#define VF610_PAD_PTA19__GPIO_9 0x024 0x000 ALT0 0x0
+#define VF610_PAD_PTA19__TRACED3 0x024 0x000 ALT1 0x0
+#define VF610_PAD_PTA19__ADC0_SE1 0x024 0x000 ALT2 0x0
+#define VF610_PAD_PTA19__FTM1_QD_PHB 0x024 0x338 ALT3 0x0
+#define VF610_PAD_PTA19__LCD32 0x024 0x000 ALT4 0x0
+#define VF610_PAD_PTA19__SAI2_TX_SYNC 0x024 0x000 ALT5 0x0
+#define VF610_PAD_PTA19__VIU_DATA17 0x024 0x000 ALT6 0x0
+#define VF610_PAD_PTA19__QSPI1_A_QSCK 0x024 0x374 ALT7 0x0
+#define VF610_PAD_PTA20__GPIO_10 0x028 0x000 ALT0 0x0
+#define VF610_PAD_PTA20__TRACED4 0x028 0x000 ALT1 0x0
+#define VF610_PAD_PTA20__LCD33 0x028 0x000 ALT4 0x0
+#define VF610_PAD_PTA20__UART3_TX 0x028 0x394 ALT6 0x0
+#define VF610_PAD_PTA20__DCU1_HSYNC 0x028 0x000 ALT7 0x0
+#define VF610_PAD_PTA21__GPIO_11 0x02C 0x000 ALT0 0x0
+#define VF610_PAD_PTA21__TRACED5 0x02C 0x000 ALT1 0x0
+#define VF610_PAD_PTA21__SAI2_RX_BCLK 0x02C 0x364 ALT5 0x0
+#define VF610_PAD_PTA21__UART3_RX 0x02C 0x390 ALT6 0x0
+#define VF610_PAD_PTA21__DCU1_VSYNC 0x02C 0x000 ALT7 0x0
+#define VF610_PAD_PTA22__GPIO_12 0x030 0x000 ALT0 0x0
+#define VF610_PAD_PTA22__TRACED6 0x030 0x000 ALT1 0x0
+#define VF610_PAD_PTA22__SAI2_RX_DATA 0x030 0x368 ALT5 0x0
+#define VF610_PAD_PTA22__I2C2_SCL 0x030 0x34C ALT6 0x0
+#define VF610_PAD_PTA22__DCU1_TAG 0x030 0x000 ALT7 0x0
+#define VF610_PAD_PTA23__GPIO_13 0x034 0x000 ALT0 0x0
+#define VF610_PAD_PTA23__TRACED7 0x034 0x000 ALT1 0x0
+#define VF610_PAD_PTA23__SAI2_RX_SYNC 0x034 0x36C ALT5 0x0
+#define VF610_PAD_PTA23__I2C2_SDA 0x034 0x350 ALT6 0x0
+#define VF610_PAD_PTA23__DCU1_DE 0x034 0x000 ALT7 0x0
+#define VF610_PAD_PTA24__GPIO_14 0x038 0x000 ALT0 0x0
+#define VF610_PAD_PTA24__TRACED8 0x038 0x000 ALT1 0x0
+#define VF610_PAD_PTA24__USB1_VBUS_EN 0x038 0x000 ALT2 0x0
+#define VF610_PAD_PTA24__ESDHC1_CLK 0x038 0x000 ALT5 0x0
+#define VF610_PAD_PTA24__DCU1_TCON4 0x038 0x000 ALT6 0x0
+#define VF610_PAD_PTA24__DDR_TEST_PAD_CTRL 0x038 0x000 ALT7 0x0
+#define VF610_PAD_PTA25__GPIO_15 0x03C 0x000 ALT0 0x0
+#define VF610_PAD_PTA25__TRACED9 0x03C 0x000 ALT1 0x0
+#define VF610_PAD_PTA25__USB1_VBUS_OC 0x03C 0x000 ALT2 0x0
+#define VF610_PAD_PTA25__ESDHC1_CMD 0x03C 0x000 ALT5 0x0
+#define VF610_PAD_PTA25__DCU1_TCON5 0x03C 0x000 ALT6 0x0
+#define VF610_PAD_PTA26__GPIO_16 0x040 0x000 ALT0 0x0
+#define VF610_PAD_PTA26__TRACED10 0x040 0x000 ALT1 0x0
+#define VF610_PAD_PTA26__SAI3_TX_BCLK 0x040 0x000 ALT2 0x0
+#define VF610_PAD_PTA26__ESDHC1_DAT0 0x040 0x000 ALT5 0x0
+#define VF610_PAD_PTA26__DCU1_TCON6 0x040 0x000 ALT6 0x0
+#define VF610_PAD_PTA27__GPIO_17 0x044 0x000 ALT0 0x0
+#define VF610_PAD_PTA27__TRACED11 0x044 0x000 ALT1 0x0
+#define VF610_PAD_PTA27__SAI3_RX_BCLK 0x044 0x000 ALT2 0x0
+#define VF610_PAD_PTA27__ESDHC1_DAT1 0x044 0x000 ALT5 0x0
+#define VF610_PAD_PTA27__DCU1_TCON7 0x044 0x000 ALT6 0x0
+#define VF610_PAD_PTA28__GPIO_18 0x048 0x000 ALT0 0x0
+#define VF610_PAD_PTA28__TRACED12 0x048 0x000 ALT1 0x0
+#define VF610_PAD_PTA28__SAI3_RX_DATA 0x048 0x000 ALT2 0x0
+#define VF610_PAD_PTA28__ENET1_1588_TMR0 0x048 0x000 ALT3 0x0
+#define VF610_PAD_PTA28__UART4_TX 0x048 0x000 ALT4 0x0
+#define VF610_PAD_PTA28__ESDHC1_DATA2 0x048 0x000 ALT5 0x0
+#define VF610_PAD_PTA28__DCU1_TCON8 0x048 0x000 ALT6 0x0
+#define VF610_PAD_PTA29__GPIO_19 0x04C 0x000 ALT0 0x0
+#define VF610_PAD_PTA29__TRACED13 0x04C 0x000 ALT1 0x0
+#define VF610_PAD_PTA29__SAI3_TX_DATA 0x04C 0x000 ALT2 0x0
+#define VF610_PAD_PTA29__ENET1_1588_TMR1 0x04C 0x000 ALT3 0x0
+#define VF610_PAD_PTA29__UART4_RX 0x04C 0x000 ALT4 0x0
+#define VF610_PAD_PTA29__ESDHC1_DAT3 0x04C 0x000 ALT5 0x0
+#define VF610_PAD_PTA29__DCU1_TCON9 0x04C 0x000 ALT6 0x0
+#define VF610_PAD_PTA30__GPIO_20 0x050 0x000 ALT0 0x0
+#define VF610_PAD_PTA30__TRACED14 0x050 0x000 ALT1 0x0
+#define VF610_PAD_PTA30__SAI3_RX_SYNC 0x050 0x000 ALT2 0x0
+#define VF610_PAD_PTA30__ENET1_1588_TMR2 0x050 0x000 ALT3 0x0
+#define VF610_PAD_PTA30__UART4_RTS 0x050 0x000 ALT4 0x0
+#define VF610_PAD_PTA30__I2C3_SCL 0x050 0x000 ALT5 0x0
+#define VF610_PAD_PTA30__UART3_TX 0x050 0x394 ALT7 0x1
+#define VF610_PAD_PTA31__GPIO_21 0x054 0x000 ALT0 0x0
+#define VF610_PAD_PTA31__TRACED15 0x054 0x000 ALT1 0x0
+#define VF610_PAD_PTA31__SAI3_TX_SYNC 0x054 0x000 ALT2 0x0
+#define VF610_PAD_PTA31__ENET1_1588_TMR3 0x054 0x000 ALT3 0x0
+#define VF610_PAD_PTA31__UART4_CTS 0x054 0x000 ALT4 0x0
+#define VF610_PAD_PTA31__I2C3_SDA 0x054 0x000 ALT5 0x0
+#define VF610_PAD_PTA31__UART3_RX 0x054 0x390 ALT7 0x1
+#define VF610_PAD_PTB0__GPIO_22 0x058 0x000 ALT0 0x0
+#define VF610_PAD_PTB0__FTM0_CH0 0x058 0x000 ALT1 0x0
+#define VF610_PAD_PTB0__ADC0_SE2 0x058 0x000 ALT2 0x0
+#define VF610_PAD_PTB0__TRACE_CTL 0x058 0x000 ALT3 0x0
+#define VF610_PAD_PTB0__LCD34 0x058 0x000 ALT4 0x0
+#define VF610_PAD_PTB0__SAI2_RX_BCLK 0x058 0x364 ALT5 0x1
+#define VF610_PAD_PTB0__VIU_DATA18 0x058 0x000 ALT6 0x0
+#define VF610_PAD_PTB0__QSPI1_A_QPCS0 0x058 0x000 ALT7 0x0
+#define VF610_PAD_PTB1__GPIO_23 0x05C 0x000 ALT0 0x0
+#define VF610_PAD_PTB1__FTM0_CH1 0x05C 0x000 ALT1 0x0
+#define VF610_PAD_PTB1__ADC0_SE3 0x05C 0x000 ALT2 0x0
+#define VF610_PAD_PTB1__SRC_RCON30 0x05C 0x000 ALT3 0x0
+#define VF610_PAD_PTB1__LCD35 0x05C 0x000 ALT4 0x0
+#define VF610_PAD_PTB1__SAI2_RX_DATA 0x05C 0x368 ALT5 0x1
+#define VF610_PAD_PTB1__VIU_DATA19 0x05C 0x000 ALT6 0x0
+#define VF610_PAD_PTB1__QSPI1_A_DATA3 0x05C 0x000 ALT7 0x0
+#define VF610_PAD_PTB2__GPIO_24 0x060 0x000 ALT0 0x0
+#define VF610_PAD_PTB2__FTM0_CH2 0x060 0x000 ALT1 0x0
+#define VF610_PAD_PTB2__ADC1_SE2 0x060 0x000 ALT2 0x0
+#define VF610_PAD_PTB2__SRC_RCON31 0x060 0x000 ALT3 0x0
+#define VF610_PAD_PTB2__LCD36 0x060 0x000 ALT4 0x0
+#define VF610_PAD_PTB2__SAI2_RX_SYNC 0x060 0x36C ALT5 0x1
+#define VF610_PAD_PTB2__VIDEO_IN0_DATA20 0x060 0x000 ALT6 0x0
+#define VF610_PAD_PTB2__QSPI1_A_DATA2 0x060 0x000 ALT7 0x0
+#define VF610_PAD_PTB3__GPIO_25 0x064 0x000 ALT0 0x0
+#define VF610_PAD_PTB3__FTM0_CH3 0x064 0x000 ALT1 0x0
+#define VF610_PAD_PTB3__ADC1_SE3 0x064 0x000 ALT2 0x0
+#define VF610_PAD_PTB3__PDB_EXTRIG 0x064 0x000 ALT3 0x0
+#define VF610_PAD_PTB3__LCD37 0x064 0x000 ALT4 0x0
+#define VF610_PAD_PTB3__VIU_DATA21 0x064 0x000 ALT6 0x0
+#define VF610_PAD_PTB3__QSPI1_A_DATA1 0x064 0x000 ALT7 0x0
+#define VF610_PAD_PTB4__GPIO_26 0x068 0x000 ALT0 0x0
+#define VF610_PAD_PTB4__FTM0_CH4 0x068 0x000 ALT1 0x0
+#define VF610_PAD_PTB4__UART1_TX 0x068 0x380 ALT2 0x0
+#define VF610_PAD_PTB4__ADC0_SE4 0x068 0x000 ALT3 0x0
+#define VF610_PAD_PTB4__LCD38 0x068 0x000 ALT4 0x0
+#define VF610_PAD_PTB4__VIU_FID 0x068 0x3A8 ALT5 0x0
+#define VF610_PAD_PTB4__VIU_DATA22 0x068 0x000 ALT6 0x0
+#define VF610_PAD_PTB4__QSPI1_A_DATA0 0x068 0x000 ALT7 0x0
+#define VF610_PAD_PTB5__GPIO_27 0x06C 0x000 ALT0 0x0
+#define VF610_PAD_PTB5__FTM0_CH5 0x06C 0x000 ALT1 0x0
+#define VF610_PAD_PTB5__UART1_RX 0x06C 0x37C ALT2 0x0
+#define VF610_PAD_PTB5__ADC1_SE4 0x06C 0x000 ALT3 0x0
+#define VF610_PAD_PTB5__LCD39 0x06C 0x000 ALT4 0x0
+#define VF610_PAD_PTB5__VIU_DE 0x06C 0x3A4 ALT5 0x0
+#define VF610_PAD_PTB5__QSPI1_A_DQS 0x06C 0x000 ALT7 0x0
+#define VF610_PAD_PTB6__GPIO_28 0x070 0x000 ALT0 0x0
+#define VF610_PAD_PTB6__FTM0_CH6 0x070 0x000 ALT1 0x0
+#define VF610_PAD_PTB6__UART1_RTS 0x070 0x000 ALT2 0x0
+#define VF610_PAD_PTB6__QSPI0_QPCS1_A 0x070 0x000 ALT3 0x0
+#define VF610_PAD_PTB6__LCD_LCD40 0x070 0x000 ALT4 0x0
+#define VF610_PAD_PTB6__FB_CLKOUT 0x070 0x000 ALT5 0x0
+#define VF610_PAD_PTB6__VIU_HSYNC 0x070 0x000 ALT6 0x0
+#define VF610_PAD_PTB6__UART2_TX 0x070 0x38C ALT7 0x0
+#define VF610_PAD_PTB7__GPIO_29 0x074 0x000 ALT0 0x0
+#define VF610_PAD_PTB7__FTM0_CH7 0x074 0x000 ALT1 0x0
+#define VF610_PAD_PTB7__UART1_CTS 0x074 0x378 ALT2 0x0
+#define VF610_PAD_PTB7__QSPI0_B_QPCS1 0x074 0x000 ALT3 0x0
+#define VF610_PAD_PTB7__LCD41 0x074 0x000 ALT4 0x0
+#define VF610_PAD_PTB7__VIU_VSYNC 0x074 0x000 ALT6 0x0
+#define VF610_PAD_PTB7__UART2_RX 0x074 0x388 ALT7 0x0
+#define VF610_PAD_PTB8__GPIO_30 0x078 0x000 ALT0 0x0
+#define VF610_PAD_PTB8__FTM1_CH0 0x078 0x32C ALT1 0x0
+#define VF610_PAD_PTB8__FTM1_QD_PHA 0x078 0x334 ALT3 0x1
+#define VF610_PAD_PTB8__VIU_DE 0x078 0x3A4 ALT5 0x1
+#define VF610_PAD_PTB8__DCU1_R6 0x078 0x000 ALT7 0x0
+#define VF610_PAD_PTB9__GPIO_31 0x07C 0x000 ALT0 0x0
+#define VF610_PAD_PTB9__FTM1_CH1 0x07C 0x330 ALT1 0x0
+#define VF610_PAD_PTB9__FTM1_QD_PHB 0x07C 0x338 ALT3 0x1
+#define VF610_PAD_PTB9__DCU1_R7 0x07C 0x000 ALT7 0x0
+#define VF610_PAD_PTB10__GPIO_32 0x080 0x000 ALT0 0x0
+#define VF610_PAD_PTB10__UART0_TX 0x080 0x000 ALT1 0x0
+#define VF610_PAD_PTB10__DCU0_TCON4 0x080 0x000 ALT4 0x0
+#define VF610_PAD_PTB10__VIU_DE 0x080 0x3A4 ALT5 0x2
+#define VF610_PAD_PTB10__CKO1 0x080 0x000 ALT6 0x0
+#define VF610_PAD_PTB10__ENET_TS_CLKIN 0x080 0x2F4 ALT7 0x1
+#define VF610_PAD_PTB11__GPIO_33 0x084 0x000 ALT0 0x0
+#define VF610_PAD_PTB11__UART0_RX 0x084 0x000 ALT1 0x0
+#define VF610_PAD_PTB11__DCU0_TCON5 0x084 0x000 ALT4 0x0
+#define VF610_PAD_PTB11__SNVS_ALARM_OUT_B 0x084 0x000 ALT5 0x0
+#define VF610_PAD_PTB11__CKO2 0x084 0x000 ALT6 0x0
+#define VF610_PAD_PTB11_ENET0_1588_TMR0 0x084 0x304 ALT7 0x0
+#define VF610_PAD_PTB12__GPIO_34 0x088 0x000 ALT0 0x0
+#define VF610_PAD_PTB12__UART0_RTS 0x088 0x000 ALT1 0x0
+#define VF610_PAD_PTB12__DSPI0_CS5 0x088 0x000 ALT3 0x0
+#define VF610_PAD_PTB12__DCU0_TCON6 0x088 0x000 ALT4 0x0
+#define VF610_PAD_PTB12__FB_AD1 0x088 0x000 ALT5 0x0
+#define VF610_PAD_PTB12__NMI 0x088 0x000 ALT6 0x0
+#define VF610_PAD_PTB12__ENET0_1588_TMR1 0x088 0x308 ALT7 0x0
+#define VF610_PAD_PTB13__GPIO_35 0x08C 0x000 ALT0 0x0
+#define VF610_PAD_PTB13__UART0_CTS 0x08C 0x000 ALT1 0x0
+#define VF610_PAD_PTB13__DSPI0_CS4 0x08C 0x000 ALT3 0x0
+#define VF610_PAD_PTB13__DCU0_TCON7 0x08C 0x000 ALT4 0x0
+#define VF610_PAD_PTB13__FB_AD0 0x08C 0x000 ALT5 0x0
+#define VF610_PAD_PTB13__TRACE_CTL 0x08C 0x000 ALT6 0x0
+#define VF610_PAD_PTB14__GPIO_36 0x090 0x000 ALT0 0x0
+#define VF610_PAD_PTB14__CAN0_RX 0x090 0x000 ALT1 0x0
+#define VF610_PAD_PTB14__I2C0_SCL 0x090 0x33C ALT2 0x1
+#define VF610_PAD_PTB14__DCU0_TCON8 0x090 0x000 ALT4 0x0
+#define VF610_PAD_PTB14__DCU1_PCLK 0x090 0x000 ALT7 0x0
+#define VF610_PAD_PTB15__GPIO_37 0x094 0x000 ALT0 0x0
+#define VF610_PAD_PTB15__CAN0_TX 0x094 0x000 ALT1 0x0
+#define VF610_PAD_PTB15__I2C0_SDA 0x094 0x340 ALT2 0x1
+#define VF610_PAD_PTB15__DCU0_TCON9 0x094 0x000 ALT4 0x0
+#define VF610_PAD_PTB15__VIU_PIX_CLK 0x094 0x3AC ALT7 0x0
+#define VF610_PAD_PTB16__GPIO_38 0x098 0x000 ALT0 0x0
+#define VF610_PAD_PTB16__CAN1_RX 0x098 0x000 ALT1 0x0
+#define VF610_PAD_PTB16__I2C1_SCL 0x098 0x344 ALT2 0x1
+#define VF610_PAD_PTB16__DCU0_TCON10 0x098 0x000 ALT4 0x0
+#define VF610_PAD_PTB17__GPIO_39 0x09C 0x000 ALT0 0x0
+#define VF610_PAD_PTB17__CAN1_TX 0x09C 0x000 ALT1 0x0
+#define VF610_PAD_PTB17__I2C1_SDA 0x09C 0x348 ALT2 0x1
+#define VF610_PAD_PTB17__DCU0_TCON11 0x09C 0x000 ALT4 0x0
+#define VF610_PAD_PTB18__GPIO_40 0x0A0 0x000 ALT0 0x0
+#define VF610_PAD_PTB18__DSPI0_CS1 0x0A0 0x000 ALT1 0x0
+#define VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x0A0 0x2EC ALT2 0x2
+#define VF610_PAD_PTB18__VIU_DATA9 0x0A0 0x000 ALT6 0x0
+#define VF610_PAD_PTB19__GPIO_41 0x0A4 0x000 ALT0 0x0
+#define VF610_PAD_PTB19__DSPI0_CS0 0x0A4 0x000 ALT1 0x0
+#define VF610_PAD_PTB19__VIU_DATA10 0x0A4 0x000 ALT6 0x0
+#define VF610_PAD_PTB20__GPIO_42 0x0A8 0x000 ALT0 0x0
+#define VF610_PAD_PTB20__DSPI0_SIN 0x0A8 0x000 ALT1 0x0
+#define VF610_PAD_PTB20__LCD42 0x0A8 0x000 ALT4 0x0
+#define VF610_PAD_PTB20__VIU_DATA11 0x0A8 0x000 ALT6 0x0
+#define VF610_PAD_PTB21__GPIO_43 0x0AC 0x000 ALT0 0x0
+#define VF610_PAD_PTB21__DSPI0_SOUT 0x0AC 0x000 ALT1 0x0
+#define VF610_PAD_PTB21__LCD43 0x0AC 0x000 ALT4 0x0
+#define VF610_PAD_PTB21__VIU_DATA12 0x0AC 0x000 ALT6 0x0
+#define VF610_PAD_PTB21__DCU1_PCLK 0x0AC 0x000 ALT7 0x0
+#define VF610_PAD_PTB22__GPIO_44 0x0B0 0x000 ALT0 0x0
+#define VF610_PAD_PTB22__DSPI0_SCK 0x0B0 0x000 ALT1 0x0
+#define VF610_PAD_PTB22__VLCD 0x0B0 0x000 ALT4 0x0
+#define VF610_PAD_PTB22__VIU_FID 0x0B0 0x3A8 ALT5 0x1
+#define VF610_PAD_PTC0__GPIO_45 0x0B4 0x000 ALT0 0x0
+#define VF610_PAD_PTC0__ENET_RMII0_MDC 0x0B4 0x000 ALT1 0x0
+#define VF610_PAD_PTC0__FTM1_CH0 0x0B4 0x32C ALT2 0x1
+#define VF610_PAD_PTC0__DSPI0_CS3 0x0B4 0x000 ALT3 0x0
+#define VF610_PAD_PTC0__ESAI_SCKT 0x0B4 0x310 ALT4 0x0
+#define VF610_PAD_PTC0__ESDHC0_CLK 0x0B4 0x000 ALT5 0x0
+#define VF610_PAD_PTC0__VIU_DATA0 0x0B4 0x000 ALT6 0x0
+#define VF610_PAD_PTC0__SRC_RCON18 0x0B4 0x398 ALT7 0x0
+#define VF610_PAD_PTC1__GPIO_46 0x0B8 0x000 ALT0 0x0
+#define VF610_PAD_PTC1__ENET_RMII0_MDIO 0x0B8 0x000 ALT1 0x0
+#define VF610_PAD_PTC1__FTM1_CH1 0x0B8 0x330 ALT2 0x1
+#define VF610_PAD_PTC1__DSPI0_CS2 0x0B8 0x000 ALT3 0x0
+#define VF610_PAD_PTC1__ESAI_FST 0x0B8 0x30C ALT4 0x0
+#define VF610_PAD_PTC1__ESDHC0_CMD 0x0B8 0x000 ALT5 0x0
+#define VF610_PAD_PTC1__VIU_DATA1 0x0B8 0x000 ALT6 0x0
+#define VF610_PAD_PTC1__SRC_RCON19 0x0B8 0x39C ALT7 0x0
+#define VF610_PAD_PTC2__GPIO_47 0x0BC 0x000 ALT0 0x0
+#define VF610_PAD_PTC2__ENET_RMII0_CRS 0x0BC 0x000 ALT1 0x0
+#define VF610_PAD_PTC2__UART1_TX 0x0BC 0x380 ALT2 0x1
+#define VF610_PAD_PTC2__ESAI_SDO0 0x0BC 0x314 ALT4 0x0
+#define VF610_PAD_PTC2__ESDHC0_DAT0 0x0BC 0x000 ALT5 0x0
+#define VF610_PAD_PTC2__VIU_DATA2 0x0BC 0x000 ALT6 0x0
+#define VF610_PAD_PTC2__SRC_RCON20 0x0BC 0x3A0 ALT7 0x0
+#define VF610_PAD_PTC3__GPIO_48 0x0C0 0x000 ALT0 0x0
+#define VF610_PAD_PTC3__ENET_RMII0_RXD1 0x0C0 0x000 ALT1 0x0
+#define VF610_PAD_PTC3__UART1_RX 0x0C0 0x37C ALT2 0x1
+#define VF610_PAD_PTC3__ESAI_SDO1 0x0C0 0x318 ALT4 0x0
+#define VF610_PAD_PTC3__ESDHC0_DAT1 0x0C0 0x000 ALT5 0x0
+#define VF610_PAD_PTC3__VIU_DATA3 0x0C0 0x000 ALT6 0x0
+#define VF610_PAD_PTC3__DCU0_R0 0x0C0 0x000 ALT7 0x0
+#define VF610_PAD_PTC4__GPIO_49 0x0C4 0x000 ALT0 0x0
+#define VF610_PAD_PTC4__ENET_RMII0_RXD0 0x0C4 0x000 ALT1 0x0
+#define VF610_PAD_PTC4__UART1_RTS 0x0C4 0x000 ALT2 0x0
+#define VF610_PAD_PTC4__DSPI1_CS1 0x0C4 0x000 ALT3 0x0
+#define VF610_PAD_PTC4__ESAI_SDO2 0x0C4 0x31C ALT4 0x0
+#define VF610_PAD_PTC4__ESDHC0_DAT2 0x0C4 0x000 ALT5 0x0
+#define VF610_PAD_PTC4__VIU_DATA4 0x0C4 0x000 ALT6 0x0
+#define VF610_PAD_PTC4__DCU0_R1 0x0C4 0x000 ALT7 0x0
+#define VF610_PAD_PTC5__GPIO_50 0x0C8 0x000 ALT0 0x0
+#define VF610_PAD_PTC5__ENET_RMII0_RXER 0x0C8 0x000 ALT1 0x0
+#define VF610_PAD_PTC5__UART1_CTS 0x0C8 0x378 ALT2 0x1
+#define VF610_PAD_PTC5__DSPI1_CS0 0x0C8 0x300 ALT3 0x0
+#define VF610_PAD_PTC5__ESAI_SDO3 0x0C8 0x320 ALT4 0x0
+#define VF610_PAD_PTC5__ESDHC0_DAT3 0x0C8 0x000 ALT5 0x0
+#define VF610_PAD_PTC5__VIU_DATA5 0x0C8 0x000 ALT6 0x0
+#define VF610_PAD_PTC5__DCU0_G0 0x0C8 0x000 ALT7 0x0
+#define VF610_PAD_PTC6__GPIO_51 0x0CC 0x000 ALT0 0x0
+#define VF610_PAD_PTC6__ENET_RMII0_TXD1 0x0CC 0x000 ALT1 0x0
+#define VF610_PAD_PTC6__DSPI1_SIN 0x0CC 0x2FC ALT3 0x0
+#define VF610_PAD_PTC6__ESAI_SDI0 0x0CC 0x328 ALT4 0x0
+#define VF610_PAD_PTC6__ESDHC0_WP 0x0CC 0x000 ALT5 0x0
+#define VF610_PAD_PTC6__VIU_DATA6 0x0CC 0x000 ALT6 0x0
+#define VF610_PAD_PTC6__DCU0_G1 0x0CC 0x000 ALT7 0x0
+#define VF610_PAD_PTC7__GPIO_52 0x0D0 0x000 ALT0 0x0
+#define VF610_PAD_PTC7__ENET_RMII0_TXD0 0x0D0 0x000 ALT1 0x0
+#define VF610_PAD_PTC7__DSPI1_SOUT 0x0D0 0x000 ALT3 0x0
+#define VF610_PAD_PTC7__ESAI_SDI1 0x0D0 0x324 ALT4 0x0
+#define VF610_PAD_PTC7__VIU_DATA7 0x0D0 0x000 ALT6 0x0
+#define VF610_PAD_PTC7__DCU0_B0 0x0D0 0x000 ALT7 0x0
+#define VF610_PAD_PTC8__GPIO_53 0x0D4 0x000 ALT0 0x0
+#define VF610_PAD_PTC8__ENET_RMII0_TXEN 0x0D4 0x000 ALT1 0x0
+#define VF610_PAD_PTC8__DSPI1_SCK 0x0D4 0x2F8 ALT3 0x0
+#define VF610_PAD_PTC8__VIU_DATA8 0x0D4 0x000 ALT6 0x0
+#define VF610_PAD_PTC8__DCU0_B1 0x0D4 0x000 ALT7 0x0
+#define VF610_PAD_PTC9__GPIO_54 0x0D8 0x000 ALT0 0x0
+#define VF610_PAD_PTC9__ENET_RMII1_MDC 0x0D8 0x000 ALT1 0x0
+#define VF610_PAD_PTC9__ESAI_SCKT 0x0D8 0x310 ALT3 0x1
+#define VF610_PAD_PTC9__MLB_CLK 0x0D8 0x354 ALT6 0x1
+#define VF610_PAD_PTC9__DEBUG_OUT0 0x0D8 0x000 ALT7 0x0
+#define VF610_PAD_PTC10__GPIO_55 0x0DC 0x000 ALT0 0x0
+#define VF610_PAD_PTC10__ENET_RMII1_MDIO 0x0DC 0x000 ALT1 0x0
+#define VF610_PAD_PTC10__ESAI_FST 0x0DC 0x30C ALT3 0x1
+#define VF610_PAD_PTC10__MLB_SIGNAL 0x0DC 0x35C ALT6 0x1
+#define VF610_PAD_PTC10__DEBUG_OUT1 0x0DC 0x000 ALT7 0x0
+#define VF610_PAD_PTC11__GPIO_56 0x0E0 0x000 ALT0 0x0
+#define VF610_PAD_PTC11__ENET_RMII1_CRS 0x0E0 0x000 ALT1 0x0
+#define VF610_PAD_PTC11__ESAI_SDO0 0x0E0 0x314 ALT3 0x1
+#define VF610_PAD_PTC11__MLB_DATA 0x0E0 0x358 ALT6 0x1
+#define VF610_PAD_PTC11__DEBUG_OUT 0x0E0 0x000 ALT7 0x0
+#define VF610_PAD_PTC12__GPIO_57 0x0E4 0x000 ALT0 0x0
+#define VF610_PAD_PTC12__ENET_RMII_RXD1 0x0E4 0x000 ALT1 0x0
+#define VF610_PAD_PTC12__ESAI_SDO1 0x0E4 0x318 ALT3 0x1
+#define VF610_PAD_PTC12__SAI2_TX_BCLK 0x0E4 0x370 ALT5 0x1
+#define VF610_PAD_PTC12__DEBUG_OUT3 0x0E4 0x000 ALT7 0x0
+#define VF610_PAD_PTC13__GPIO_58 0x0E8 0x000 ALT0 0x0
+#define VF610_PAD_PTC13__ENET_RMII1_RXD0 0x0E8 0x000 ALT1 0x0
+#define VF610_PAD_PTC13__ESAI_SDO2 0x0E8 0x31C ALT3 0x1
+#define VF610_PAD_PTC13__SAI2_RX_BCLK 0x0E8 0x364 ALT5 0x2
+#define VF610_PAD_PTC13__DEBUG_OUT4 0x0E8 0x000 ALT7 0x0
+#define VF610_PAD_PTC14__GPIO_59 0x0EC 0x000 ALT0 0x0
+#define VF610_PAD_PTC14__ENET_RMII1_RXER 0x0EC 0x000 ALT1 0x0
+#define VF610_PAD_PTC14__ESAI_SDO3 0x0EC 0x320 ALT3 0x1
+#define VF610_PAD_PTC14__UART5_TX 0x0EC 0x000 ALT4 0x0
+#define VF610_PAD_PTC14__SAI2_RX_DATA 0x0EC 0x368 ALT5 0x2
+#define VF610_PAD_PTC14__ADC0_SE6 0x0EC 0x000 ALT6 0x0
+#define VF610_PAD_PTC14__DEBUG_OUT5 0x0EC 0x000 ALT7 0x0
+#define VF610_PAD_PTC15__GPIO_60 0x0F0 0x000 ALT0 0x0
+#define VF610_PAD_PTC15__ENET_RMII1_TXD1 0x0F0 0x000 ALT1 0x0
+#define VF610_PAD_PTC15__ESAI_SDI0 0x0F0 0x328 ALT3 0x1
+#define VF610_PAD_PTC15__UART5_RX 0x0F0 0x000 ALT4 0x0
+#define VF610_PAD_PTC15__SAI2_TX_DATA 0x0F0 0x000 ALT5 0x0
+#define VF610_PAD_PTC15__ADC0_SE7 0x0F0 0x000 ALT6 0x0
+#define VF610_PAD_PTC15__DEBUG_OUT6 0x0F0 0x000 ALT7 0x0
+#define VF610_PAD_PTC16__GPIO_61 0x0F4 0x000 ALT0 0x0
+#define VF610_PAD_PTC16__ENET_RMII1_TXD0 0x0F4 0x000 ALT1 0x0
+#define VF610_PAD_PTC16__ESAI_SDI1 0x0F4 0x324 ALT3 0x1
+#define VF610_PAD_PTC16__UART5_RTS 0x0F4 0x000 ALT4 0x0
+#define VF610_PAD_PTC16__SAI2_RX_SYNC 0x0F4 0x36C ALT5 0x2
+#define VF610_PAD_PTC16__ADC1_SE6 0x0F4 0x000 ALT6 0x0
+#define VF610_PAD_PTC16__DEBUG_OUT7 0x0F4 0x000 ALT7 0x0
+#define VF610_PAD_PTC17__GPIO_62 0x0F8 0x000 ALT0 0x0
+#define VF610_PAD_PTC17__ENET_RMII1_TXEN 0x0F8 0x000 ALT1 0x0
+#define VF610_PAD_PTC17__ADC1_SE7 0x0F8 0x000 ALT3 0x0
+#define VF610_PAD_PTC17__UART5_CTS 0x0F8 0x000 ALT4 0x0
+#define VF610_PAD_PTC17__SAI2_TX_SYNC 0x0F8 0x374 ALT5 0x1
+#define VF610_PAD_PTC17__USB1_SOF_PULSE 0x0F8 0x000 ALT6 0x0
+#define VF610_PAD_PTC17__DEBUG_OUT8 0x0F8 0x000 ALT7 0x0
+#define VF610_PAD_PTD31__GPIO_63 0x0FC 0x000 ALT0 0x0
+#define VF610_PAD_PTD31__FB_AD31 0x0FC 0x000 ALT1 0x0
+#define VF610_PAD_PTD31__NF_IO15 0x0FC 0x000 ALT2 0x0
+#define VF610_PAD_PTD31__FTM3_CH0 0x0FC 0x000 ALT4 0x0
+#define VF610_PAD_PTD31__DSPI2_CS1 0x0FC 0x000 ALT5 0x0
+#define VF610_PAD_PTD31__DEBUG_OUT9 0x0FC 0x000 ALT7 0x0
+#define VF610_PAD_PTD30__GPIO_64 0x100 0x000 ALT0 0x0
+#define VF610_PAD_PTD30__FB_AD30 0x100 0x000 ALT1 0x0
+#define VF610_PAD_PTD30__NF_IO14 0x100 0x000 ALT2 0x0
+#define VF610_PAD_PTD30__FTM3_CH1 0x100 0x000 ALT4 0x0
+#define VF610_PAD_PTD30__DSPI2_CS0 0x100 0x000 ALT5 0x0
+#define VF610_PAD_PTD30__DEBUG_OUT10 0x100 0x000 ALT7 0x0
+#define VF610_PAD_PTD29__GPIO_65 0x104 0x000 ALT0 0x0
+#define VF610_PAD_PTD29__FB_AD29 0x104 0x000 ALT1 0x0
+#define VF610_PAD_PTD29__NF_IO13 0x104 0x000 ALT2 0x0
+#define VF610_PAD_PTD29__FTM3_CH2 0x104 0x000 ALT4 0x0
+#define VF610_PAD_PTD29__DSPI2_SIN 0x104 0x000 ALT5 0x0
+#define VF610_PAD_PTD29__DEBUG_OUT11 0x104 0x000 ALT7 0x0
+#define VF610_PAD_PTD28__GPIO_66 0x108 0x000 ALT0 0x0
+#define VF610_PAD_PTD28__FB_AD28 0x108 0x000 ALT1 0x0
+#define VF610_PAD_PTD28__NF_IO12 0x108 0x000 ALT2 0x0
+#define VF610_PAD_PTD28__I2C2_SCL 0x108 0x34C ALT3 0x1
+#define VF610_PAD_PTD28__FTM3_CH3 0x108 0x000 ALT4 0x0
+#define VF610_PAD_PTD28__DSPI2_SOUT 0x108 0x000 ALT5 0x0
+#define VF610_PAD_PTD28__DEBUG_OUT12 0x108 0x000 ALT7 0x0
+#define VF610_PAD_PTD27__GPIO_67 0x10C 0x000 ALT0 0x0
+#define VF610_PAD_PTD27__FB_AD27 0x10C 0x000 ALT1 0x0
+#define VF610_PAD_PTD27__NF_IO11 0x10C 0x000 ALT2 0x0
+#define VF610_PAD_PTD27__I2C2_SDA 0x10C 0x350 ALT3 0x1
+#define VF610_PAD_PTD27__FTM3_CH4 0x10C 0x000 ALT4 0x0
+#define VF610_PAD_PTD27__DSPI2_SCK 0x10C 0x000 ALT5 0x0
+#define VF610_PAD_PTD27__DEBUG_OUT13 0x10C 0x000 ALT7 0x0
+#define VF610_PAD_PTD26__GPIO_68 0x110 0x000 ALT0 0x0
+#define VF610_PAD_PTD26__FB_AD26 0x110 0x000 ALT1 0x0
+#define VF610_PAD_PTD26__NF_IO10 0x110 0x000 ALT2 0x0
+#define VF610_PAD_PTD26__FTM3_CH5 0x110 0x000 ALT4 0x0
+#define VF610_PAD_PTD26__ESDHC1_WP 0x110 0x000 ALT5 0x0
+#define VF610_PAD_PTD26__DEBUG_OUT14 0x110 0x000 ALT7 0x0
+#define VF610_PAD_PTD25__GPIO_69 0x114 0x000 ALT0 0x0
+#define VF610_PAD_PTD25__FB_AD25 0x114 0x000 ALT1 0x0
+#define VF610_PAD_PTD25__NF_IO9 0x114 0x000 ALT2 0x0
+#define VF610_PAD_PTD25__FTM3_CH6 0x114 0x000 ALT4 0x0
+#define VF610_PAD_PTD25__DEBUG_OUT15 0x114 0x000 ALT7 0x0
+#define VF610_PAD_PTD24__GPIO_70 0x118 0x000 ALT0 0x0
+#define VF610_PAD_PTD24__FB_AD24 0x118 0x000 ALT1 0x0
+#define VF610_PAD_PTD24__NF_IO8 0x118 0x000 ALT2 0x0
+#define VF610_PAD_PTD24__FTM3_CH7 0x118 0x000 ALT4 0x0
+#define VF610_PAD_PTD24__DEBUG_OUT16 0x118 0x000 ALT7 0x0
+#define VF610_PAD_PTD23__GPIO_71 0x11C 0x000 ALT0 0x0
+#define VF610_PAD_PTD23__FB_AD23 0x11C 0x000 ALT1 0x0
+#define VF610_PAD_PTD23__NF_IO7 0x11C 0x000 ALT2 0x0
+#define VF610_PAD_PTD23__FTM2_CH0 0x11C 0x000 ALT3 0x0
+#define VF610_PAD_PTD23__ENET0_1588_TMR0 0x11C 0x304 ALT4 0x1
+#define VF610_PAD_PTD23__ESDHC0_DAT4 0x11C 0x000 ALT5 0x0
+#define VF610_PAD_PTD23__UART2_TX 0x11C 0x38C ALT6 0x1
+#define VF610_PAD_PTD23__DCU1_R3 0x11C 0x000 ALT7 0x0
+#define VF610_PAD_PTD22__GPIO_72 0x120 0x000 ALT0 0x0
+#define VF610_PAD_PTD22__FB_AD22 0x120 0x000 ALT1 0x0
+#define VF610_PAD_PTD22__NF_IO6 0x120 0x000 ALT2 0x0
+#define VF610_PAD_PTD22__FTM2_CH1 0x120 0x000 ALT3 0x0
+#define VF610_PAD_PTD22__ENET0_1588_TMR1 0x120 0x308 ALT4 0x1
+#define VF610_PAD_PTD22__ESDHC0_DAT5 0x120 0x000 ALT5 0x0
+#define VF610_PAD_PTD22__UART2_RX 0x120 0x388 ALT6 0x1
+#define VF610_PAD_PTD22__DCU1_R4 0x120 0x000 ALT7 0x0
+#define VF610_PAD_PTD21__GPIO_73 0x124 0x000 ALT0 0x0
+#define VF610_PAD_PTD21__FB_AD21 0x124 0x000 ALT1 0x0
+#define VF610_PAD_PTD21__NF_IO5 0x124 0x000 ALT2 0x0
+#define VF610_PAD_PTD21__ENET0_1588_TMR2 0x124 0x000 ALT4 0x0
+#define VF610_PAD_PTD21__ESDHC0_DAT6 0x124 0x000 ALT5 0x0
+#define VF610_PAD_PTD21__UART2_RTS 0x124 0x000 ALT6 0x0
+#define VF610_PAD_PTD21__DCU1_R5 0x124 0x000 ALT7 0x0
+#define VF610_PAD_PTD20__GPIO_74 0x128 0x000 ALT0 0x0
+#define VF610_PAD_PTD20__FB_AD20 0x128 0x000 ALT1 0x0
+#define VF610_PAD_PTD20__NF_IO4 0x128 0x000 ALT2 0x0
+#define VF610_PAD_PTD20__ENET0_1588_TMR3 0x128 0x000 ALT4 0x0
+#define VF610_PAD_PTD20__ESDHC0_DAT7 0x128 0x000 ALT5 0x0
+#define VF610_PAD_PTD20__UART2_CTS 0x128 0x384 ALT6 0x0
+#define VF610_PAD_PTD20__DCU1_R0 0x128 0x000 ALT7 0x0
+#define VF610_PAD_PTD19__GPIO_75 0x12C 0x000 ALT0 0x0
+#define VF610_PAD_PTD19__FB_AD19 0x12C 0x000 ALT1 0x0
+#define VF610_PAD_PTD19__NF_IO3 0x12C 0x000 ALT2 0x0
+#define VF610_PAD_PTD19__ESAI_SCKR 0x12C 0x000 ALT3 0x0
+#define VF610_PAD_PTD19__I2C0_SCL 0x12C 0x33C ALT4 0x2
+#define VF610_PAD_PTD19__FTM2_QD_PHA 0x12C 0x000 ALT5 0x0
+#define VF610_PAD_PTD19__DCU1_R1 0x12C 0x000 ALT7 0x0
+#define VF610_PAD_PTD18__GPIO_76 0x130 0x000 ALT0 0x0
+#define VF610_PAD_PTD18__FB_AD18 0x130 0x000 ALT1 0x0
+#define VF610_PAD_PTD18__NF_IO2 0x130 0x000 ALT2 0x0
+#define VF610_PAD_PTD18__ESAI_FSR 0x130 0x000 ALT3 0x0
+#define VF610_PAD_PTD18__I2C0_SDA 0x130 0x340 ALT4 0x2
+#define VF610_PAD_PTD18__FTM2_QD_PHB 0x130 0x000 ALT5 0x0
+#define VF610_PAD_PTD18__DCU1_G0 0x130 0x000 ALT7 0x0
+#define VF610_PAD_PTD17__GPIO_77 0x134 0x000 ALT0 0x0
+#define VF610_PAD_PTD17__FB_AD17 0x134 0x000 ALT1 0x0
+#define VF610_PAD_PTD17__NF_IO1 0x134 0x000 ALT2 0x0
+#define VF610_PAD_PTD17__ESAI_HCKR 0x134 0x000 ALT3 0x0
+#define VF610_PAD_PTD17__I2C1_SCL 0x134 0x344 ALT4 0x2
+#define VF610_PAD_PTD17__DCU1_G1 0x134 0x000 ALT7 0x0
+#define VF610_PAD_PTD16__GPIO_78 0x138 0x000 ALT0 0x0
+#define VF610_PAD_PTD16__FB_AD16 0x138 0x000 ALT1 0x0
+#define VF610_PAD_PTD16__NF_IO0 0x138 0x000 ALT2 0x0
+#define VF610_PAD_PTD16__ESAI_HCKT 0x138 0x000 ALT3 0x0
+#define VF610_PAD_PTD16__I2C1_SDA 0x138 0x348 ALT4 0x2
+#define VF610_PAD_PTD16__DCU1_G2 0x138 0x000 ALT7 0x0
+#define VF610_PAD_PTD0__GPIO_79 0x13C 0x000 ALT0 0x0
+#define VF610_PAD_PTD0__QSPI0_A_QSCK 0x13C 0x000 ALT1 0x0
+#define VF610_PAD_PTD0__UART2_TX 0x13C 0x38C ALT2 0x2
+#define VF610_PAD_PTD0__FB_AD15 0x13C 0x000 ALT4 0x0
+#define VF610_PAD_PTD0__SPDIF_EXTCLK 0x13C 0x000 ALT5 0x0
+#define VF610_PAD_PTD0__DEBUG_OUT17 0x13C 0x000 ALT7 0x0
+#define VF610_PAD_PTD1__GPIO_80 0x140 0x000 ALT0 0x0
+#define VF610_PAD_PTD1__QSPI0_A_CS0 0x140 0x000 ALT1 0x0
+#define VF610_PAD_PTD1__UART2_RX 0x140 0x388 ALT2 0x2
+#define VF610_PAD_PTD1__FB_AD14 0x140 0x000 ALT4 0x0
+#define VF610_PAD_PTD1__SPDIF_IN1 0x140 0x000 ALT5 0x0
+#define VF610_PAD_PTD1__DEBUG_OUT18 0x140 0x000 ALT7 0x0
+#define VF610_PAD_PTD2__GPIO_81 0x144 0x000 ALT0 0x0
+#define VF610_PAD_PTD2__QSPI0_A_DATA3 0x144 0x000 ALT1 0x0
+#define VF610_PAD_PTD2__UART2_RTS 0x144 0x000 ALT2 0x0
+#define VF610_PAD_PTD2__DSPI1_CS3 0x144 0x000 ALT3 0x0
+#define VF610_PAD_PTD2__FB_AD13 0x144 0x000 ALT4 0x0
+#define VF610_PAD_PTD2__SPDIF_OUT1 0x144 0x000 ALT5 0x0
+#define VF610_PAD_PTD2__DEBUG_OUT19 0x144 0x000 ALT7 0x0
+#define VF610_PAD_PTD3__GPIO_82 0x148 0x000 ALT0 0x0
+#define VF610_PAD_PTD3__QSPI0_A_DATA2 0x148 0x000 ALT1 0x0
+#define VF610_PAD_PTD3__UART2_CTS 0x148 0x384 ALT2 0x1
+#define VF610_PAD_PTD3__DSPI1_CS2 0x148 0x000 ALT3 0x0
+#define VF610_PAD_PTD3__FB_AD12 0x148 0x000 ALT4 0x0
+#define VF610_PAD_PTD3__SPDIF_PLOCK 0x148 0x000 ALT5 0x0
+#define VF610_PAD_PTD3__DEBUG_OUT20 0x148 0x000 ALT7 0x0
+#define VF610_PAD_PTD4__GPIO_83 0x14C 0x000 ALT0 0x0
+#define VF610_PAD_PTD4__QSPI0_A_DATA1 0x14C 0x000 ALT1 0x0
+#define VF610_PAD_PTD4__DSPI1_CS1 0x14C 0x000 ALT3 0x0
+#define VF610_PAD_PTD4__FB_AD11 0x14C 0x000 ALT4 0x0
+#define VF610_PAD_PTD4__SPDIF_SRCLK 0x14C 0x000 ALT5 0x0
+#define VF610_PAD_PTD4__DEBUG_OUT21 0x14C 0x000 ALT7 0x0
+#define VF610_PAD_PTD5__GPIO_84 0x150 0x000 ALT0 0x0
+#define VF610_PAD_PTD5__QSPI0_A_DATA0 0x150 0x000 ALT1 0x0
+#define VF610_PAD_PTD5__DSPI1_CS0 0x150 0x300 ALT3 0x1
+#define VF610_PAD_PTD5__FB_AD10 0x150 0x000 ALT4 0x0
+#define VF610_PAD_PTD5__DEBUG_OUT22 0x150 0x000 ALT7 0x0
+#define VF610_PAD_PTD6__GPIO_85 0x154 0x000 ALT0 0x0
+#define VF610_PAD_PTD6__QSPI1_A_DQS 0x154 0x000 ALT1 0x0
+#define VF610_PAD_PTD6__DSPI1_SIN 0x154 0x2FC ALT3 0x1
+#define VF610_PAD_PTD6__FB_AD9 0x154 0x000 ALT4 0x0
+#define VF610_PAD_PTD6__DEBUG_OUT23 0x154 0x000 ALT7 0x0
+#define VF610_PAD_PTD7__GPIO_86 0x158 0x000 ALT0 0x0
+#define VF610_PAD_PTD7__QSPI0_B_QSCK 0x158 0x000 ALT1 0x0
+#define VF610_PAD_PTD7__DSPI1_SOUT 0x158 0x000 ALT3 0x0
+#define VF610_PAD_PTD7__FB_AD8 0x158 0x000 ALT4 0x0
+#define VF610_PAD_PTD7__DEBUG_OUT24 0x158 0x000 ALT7 0x0
+#define VF610_PAD_PTD8__GPIO_87 0x15C 0x000 ALT0 0x0
+#define VF610_PAD_PTD8__QSPI0_B_CS0 0x15C 0x000 ALT1 0x0
+#define VF610_PAD_PTD8__FB_CLKOUT 0x15C 0x000 ALT2 0x0
+#define VF610_PAD_PTD8__DSPI1_SCK 0x15C 0x2F8 ALT3 0x1
+#define VF610_PAD_PTD8__FB_AD7 0x15C 0x000 ALT4 0x0
+#define VF610_PAD_PTD8__DEBUG_OUT25 0x15C 0x000 ALT7 0x0
+#define VF610_PAD_PTD9__GPIO_88 0x160 0x000 ALT0 0x0
+#define VF610_PAD_PTD9__QSPI0_B_DATA3 0x160 0x000 ALT1 0x0
+#define VF610_PAD_PTD9__DSPI3_CS1 0x160 0x000 ALT2 0x0
+#define VF610_PAD_PTD9__FB_AD6 0x160 0x000 ALT4 0x0
+#define VF610_PAD_PTD9__SAI1_TX_SYNC 0x160 0x360 ALT6 0x0
+#define VF610_PAD_PTD9__DCU1_B0 0x160 0x000 ALT7 0x0
+#define VF610_PAD_PTD10__GPIO_89 0x164 0x000 ALT0 0x0
+#define VF610_PAD_PTD10__QSPI0_B_DATA2 0x164 0x000 ALT1 0x0
+#define VF610_PAD_PTD10__DSPI3_CS0 0x164 0x000 ALT2 0x0
+#define VF610_PAD_PTD10__FB_AD5 0x164 0x000 ALT4 0x0
+#define VF610_PAD_PTD10__DCU1_B1 0x164 0x000 ALT7 0x0
+#define VF610_PAD_PTD11__GPIO_90 0x168 0x000 ALT0 0x0
+#define VF610_PAD_PTD11__QSPI0_B_DATA1 0x168 0x000 ALT1 0x0
+#define VF610_PAD_PTD11__DSPI3_SIN 0x168 0x000 ALT2 0x0
+#define VF610_PAD_PTD11__FB_AD4 0x168 0x000 ALT4 0x0
+#define VF610_PAD_PTD11__DEBUG_OUT26 0x168 0x000 ALT7 0x0
+#define VF610_PAD_PTD12__GPIO_91 0x16C 0x000 ALT0 0x0
+#define VF610_PAD_PTD12__QSPI0_B_DATA0 0x16C 0x000 ALT1 0x0
+#define VF610_PAD_PTD12__DSPI3_SOUT 0x16C 0x000 ALT2 0x0
+#define VF610_PAD_PTD12__FB_AD3 0x16C 0x000 ALT4 0x0
+#define VF610_PAD_PTD12__DEBUG_OUT27 0x16C 0x000 ALT7 0x0
+#define VF610_PAD_PTD13__GPIO_92 0x170 0x000 ALT0 0x0
+#define VF610_PAD_PTD13__QSPI0_B_DQS 0x170 0x000 ALT1 0x0
+#define VF610_PAD_PTD13__DSPI3_SCK 0x170 0x000 ALT2 0x0
+#define VF610_PAD_PTD13__FB_AD2 0x170 0x000 ALT4 0x0
+#define VF610_PAD_PTD13__DEBUG_OUT28 0x170 0x000 ALT7 0x0
+#define VF610_PAD_PTB23__GPIO_93 0x174 0x000 ALT0 0x0
+#define VF610_PAD_PTB23__SAI0_TX_BCLK 0x174 0x000 ALT1 0x0
+#define VF610_PAD_PTB23__UART1_TX 0x174 0x380 ALT2 0x2
+#define VF610_PAD_PTB23__SRC_RCON18 0x174 0x398 ALT3 0x1
+#define VF610_PAD_PTB23__FB_MUXED_ALE 0x174 0x000 ALT4 0x0
+#define VF610_PAD_PTB23__FB_TS_B 0x174 0x000 ALT5 0x0
+#define VF610_PAD_PTB23__UART3_RTS 0x174 0x000 ALT6 0x0
+#define VF610_PAD_PTB23__DCU1_G3 0x174 0x000 ALT7 0x0
+#define VF610_PAD_PTB24__GPIO_94 0x178 0x000 ALT0 0x0
+#define VF610_PAD_PTB24__SAI0_RX_BCLK 0x178 0x000 ALT1 0x0
+#define VF610_PAD_PTB24__UART1_RX 0x178 0x37C ALT2 0x2
+#define VF610_PAD_PTB24__SRC_RCON19 0x178 0x39C ALT3 0x1
+#define VF610_PAD_PTB24__FB_MUXED_TSIZ0 0x178 0x000 ALT4 0x0
+#define VF610_PAD_PTB24__NF_WE_B 0x178 0x000 ALT5 0x0
+#define VF610_PAD_PTB24__UART3_CTS 0x178 0x000 ALT6 0x0
+#define VF610_PAD_PTB24__DCU1_G4 0x178 0x000 ALT7 0x0
+#define VF610_PAD_PTB25__GPIO_95 0x17C 0x000 ALT0 0x0
+#define VF610_PAD_PTB25__SAI0_RX_DATA 0x17C 0x000 ALT1 0x0
+#define VF610_PAD_PTB25__UART1_RTS 0x17C 0x000 ALT2 0x0
+#define VF610_PAD_PTB25__SRC_RCON20 0x17C 0x3A0 ALT3 0x1
+#define VF610_PAD_PTB25__FB_CS1_B 0x17C 0x000 ALT4 0x0
+#define VF610_PAD_PTB25__NF_CE0_B 0x17C 0x000 ALT5 0x0
+#define VF610_PAD_PTB25__DCU1_G5 0x17C 0x000 ALT7 0x0
+#define VF610_PAD_PTB26__GPIO_96 0x180 0x000 ALT0 0x0
+#define VF610_PAD_PTB26__SAI0_TX_DATA 0x180 0x000 ALT1 0x0
+#define VF610_PAD_PTB26__UART1_CTS 0x180 0x378 ALT2 0x2
+#define VF610_PAD_PTB26__SRC_RCON21 0x180 0x000 ALT3 0x0
+#define VF610_PAD_PTB26__FB_CS0_B 0x180 0x000 ALT4 0x0
+#define VF610_PAD_PTB26__NF_CE1_B 0x180 0x000 ALT5 0x0
+#define VF610_PAD_PTB26__DCU1_G6 0x180 0x000 ALT7 0x0
+#define VF610_PAD_PTB27__GPIO_97 0x184 0x000 ALT0 0x0
+#define VF610_PAD_PTB27__SAI0_RX_SYNC 0x184 0x000 ALT1 0x0
+#define VF610_PAD_PTB27__SRC_RCON22 0x184 0x000 ALT3 0x0
+#define VF610_PAD_PTB27__FB_OE_B 0x184 0x000 ALT4 0x0
+#define VF610_PAD_PTB27__FB_MUXED_TBST_B 0x184 0x000 ALT5 0x0
+#define VF610_PAD_PTB27__NF_RE_B 0x184 0x000 ALT6 0x0
+#define VF610_PAD_PTB27__DCU1_G7 0x184 0x000 ALT7 0x0
+#define VF610_PAD_PTB28__GPIO_98 0x188 0x000 ALT0 0x0
+#define VF610_PAD_PTB28__SAI0_TX_SYNC 0x188 0x000 ALT1 0x0
+#define VF610_PAD_PTB28__SRC_RCON23 0x188 0x000 ALT3 0x0
+#define VF610_PAD_PTB28__FB_RW_B 0x188 0x000 ALT4 0x0
+#define VF610_PAD_PTB28__DCU1_B6 0x188 0x000 ALT7 0x0
+#define VF610_PAD_PTC26__GPIO_99 0x18C 0x000 ALT0 0x0
+#define VF610_PAD_PTC26__SAI1_TX_BCLK 0x18C 0x000 ALT1 0x0
+#define VF610_PAD_PTC26__DSPI0_CS5 0x18C 0x000 ALT2 0x0
+#define VF610_PAD_PTC26__SRC_RCON24 0x18C 0x000 ALT3 0x0
+#define VF610_PAD_PTC26__FB_TA_B 0x18C 0x000 ALT4 0x0
+#define VF610_PAD_PTC26__NF_RB_B 0x18C 0x000 ALT5 0x0
+#define VF610_PAD_PTC26__DCU1_B7 0x18C 0x000 ALT7 0x0
+#define VF610_PAD_PTC27__GPIO_100 0x190 0x000 ALT0 0x0
+#define VF610_PAD_PTC27__SAI1_RX_BCLK 0x190 0x000 ALT1 0x0
+#define VF610_PAD_PTC27__DSPI0_CS4 0x190 0x000 ALT2 0x0
+#define VF610_PAD_PTC27__SRC_RCON25 0x190 0x000 ALT3 0x0
+#define VF610_PAD_PTC27__FB_BE3_B 0x190 0x000 ALT4 0x0
+#define VF610_PAD_PTC27__FB_CS3_B 0x190 0x000 ALT5 0x0
+#define VF610_PAD_PTC27__NF_ALE 0x190 0x000 ALT6 0x0
+#define VF610_PAD_PTC27__DCU1_B2 0x190 0x000 ALT7 0x0
+#define VF610_PAD_PTC28__GPIO_101 0x194 0x000 ALT0 0x0
+#define VF610_PAD_PTC28__SAI1_RX_DATA 0x194 0x000 ALT1 0x0
+#define VF610_PAD_PTC28__DSPI0_CS3 0x194 0x000 ALT2 0x0
+#define VF610_PAD_PTC28__SRC_RCON26 0x194 0x000 ALT3 0x0
+#define VF610_PAD_PTC28__FB_BE2_B 0x194 0x000 ALT4 0x0
+#define VF610_PAD_PTC28__FB_CS2_B 0x194 0x000 ALT5 0x0
+#define VF610_PAD_PTC28__NF_CLE 0x194 0x000 ALT6 0x0
+#define VF610_PAD_PTC28__DCU1_B3 0x194 0x000 ALT7 0x0
+#define VF610_PAD_PTC29__GPIO_102 0x198 0x000 ALT0 0x0
+#define VF610_PAD_PTC29__SAI1_TX_DATA 0x198 0x000 ALT1 0x0
+#define VF610_PAD_PTC29__DSPI0_CS2 0x198 0x000 ALT2 0x0
+#define VF610_PAD_PTC29__SRC_RCON27 0x198 0x000 ALT3 0x0
+#define VF610_PAD_PTC29__FB_BE1_B 0x198 0x000 ALT4 0x0
+#define VF610_PAD_PTC29__FB_MUXED_TSIZE1 0x198 0x000 ALT5 0x0
+#define VF610_PAD_PTC29__DCU1_B4 0x198 0x000 ALT7 0x0
+#define VF610_PAD_PTC30__GPIO_103 0x19C 0x000 ALT0 0x0
+#define VF610_PAD_PTC30__SAI1_RX_SYNC 0x19C 0x000 ALT1 0x0
+#define VF610_PAD_PTC30__DSPI1_CS2 0x19C 0x000 ALT2 0x0
+#define VF610_PAD_PTC30__SRC_RCON28 0x19C 0x000 ALT3 0x0
+#define VF610_PAD_PTC30__FB_MUXED_BE0_B 0x19C 0x000 ALT4 0x0
+#define VF610_PAD_PTC30__FB_TSIZ0 0x19C 0x000 ALT5 0x0
+#define VF610_PAD_PTC30__ADC0_SE5 0x19C 0x000 ALT6 0x0
+#define VF610_PAD_PTC30__DCU1_B5 0x19C 0x000 ALT7 0x0
+#define VF610_PAD_PTC31__GPIO_104 0x1A0 0x000 ALT0 0x0
+#define VF610_PAD_PTC31__SAI1_TX_SYNC 0x1A0 0x360 ALT1 0x1
+#define VF610_PAD_PTC31__SRC_RCON29 0x1A0 0x000 ALT3 0x0
+#define VF610_PAD_PTC31__ADC1_SE5 0x1A0 0x000 ALT6 0x0
+#define VF610_PAD_PTC31__DCU1_B6 0x1A0 0x000 ALT7 0x0
+#define VF610_PAD_PTE0__GPIO_105 0x1A4 0x000 ALT0 0x0
+#define VF610_PAD_PTE0__DCU0_HSYNC 0x1A4 0x000 ALT1 0x0
+#define VF610_PAD_PTE0__SRC_BMODE1 0x1A4 0x000 ALT2 0x0
+#define VF610_PAD_PTE0__LCD0 0x1A4 0x000 ALT4 0x0
+#define VF610_PAD_PTE0__DEBUG_OUT29 0x1A4 0x000 ALT7 0x0
+#define VF610_PAD_PTE1__GPIO_106 0x1A8 0x000 ALT0 0x0
+#define VF610_PAD_PTE1__DCU0_VSYNC 0x1A8 0x000 ALT1 0x0
+#define VF610_PAD_PTE1__SRC_BMODE0 0x1A8 0x000 ALT2 0x0
+#define VF610_PAD_PTE1__LCD1 0x1A8 0x000 ALT4 0x0
+#define VF610_PAD_PTE1__DEBUG_OUT30 0x1A8 0x000 ALT7 0x0
+#define VF610_PAD_PTE2__GPIO_107 0x1AC 0x000 ALT0 0x0
+#define VF610_PAD_PTE2__DCU0_PCLK 0x1AC 0x000 ALT1 0x0
+#define VF610_PAD_PTE2__LCD2 0x1AC 0x000 ALT4 0x0
+#define VF610_PAD_PTE2__DEBUG_OUT31 0x1AC 0x000 ALT7 0x0
+#define VF610_PAD_PTE3__GPIO_108 0x1B0 0x000 ALT0 0x0
+#define VF610_PAD_PTE3__DCU0_TAG 0x1B0 0x000 ALT1 0x0
+#define VF610_PAD_PTE3__LCD3 0x1B0 0x000 ALT4 0x0
+#define VF610_PAD_PTE3__DEBUG_OUT32 0x1B0 0x000 ALT7 0x0
+#define VF610_PAD_PTE4__GPIO_109 0x1B4 0x000 ALT0 0x0
+#define VF610_PAD_PTE4__DCU0_DE 0x1B4 0x000 ALT1 0x0
+#define VF610_PAD_PTE4__LCD4 0x1B4 0x000 ALT4 0x0
+#define VF610_PAD_PTE4__DEBUG_OUT33 0x1B4 0x000 ALT7 0x0
+#define VF610_PAD_PTE5__GPIO_110 0x1B8 0x000 ALT0 0x0
+#define VF610_PAD_PTE5__DCU0_R0 0x1B8 0x000 ALT1 0x0
+#define VF610_PAD_PTE5__LCD5 0x1B8 0x000 ALT4 0x0
+#define VF610_PAD_PTE5__DEBUG_OUT34 0x1B8 0x000 ALT7 0x0
+#define VF610_PAD_PTE6__GPIO_111 0x1BC 0x000 ALT0 0x0
+#define VF610_PAD_PTE6__DCU0_R1 0x1BC 0x000 ALT1 0x0
+#define VF610_PAD_PTE6__LCD6 0x1BC 0x000 ALT4 0x0
+#define VF610_PAD_PTE6__DEBUG_OUT35 0x1BC 0x000 ALT7 0x0
+#define VF610_PAD_PTE7__GPIO_112 0x1C0 0x000 ALT0 0x0
+#define VF610_PAD_PTE7__DCU0_R2 0x1C0 0x000 ALT1 0x0
+#define VF610_PAD_PTE7__SRC_RCON0 0x1C0 0x000 ALT3 0x0
+#define VF610_PAD_PTE7__LCD7 0x1C0 0x000 ALT4 0x0
+#define VF610_PAD_PTE7__DEBUG_OUT36 0x1C0 0x000 ALT7 0x0
+#define VF610_PAD_PTE8__GPIO_113 0x1C4 0x000 ALT0 0x0
+#define VF610_PAD_PTE8__DCU0_R3 0x1C4 0x000 ALT1 0x0
+#define VF610_PAD_PTE8__SRC_RCON1 0x1C4 0x000 ALT3 0x0
+#define VF610_PAD_PTE8__LCD8 0x1C4 0x000 ALT4 0x0
+#define VF610_PAD_PTE8__DEBUG_OUT37 0x1C4 0x000 ALT7 0x0
+#define VF610_PAD_PTE9__GPIO_114 0x1C8 0x000 ALT0 0x0
+#define VF610_PAD_PTE9__DCU0_R4 0x1C8 0x000 ALT1 0x0
+#define VF610_PAD_PTE9__SRC_RCON2 0x1C8 0x000 ALT3 0x0
+#define VF610_PAD_PTE9__LCD9 0x1C8 0x000 ALT4 0x0
+#define VF610_PAD_PTE9__DEBUG_OUT38 0x1C8 0x000 ALT7 0x0
+#define VF610_PAD_PTE10__GPIO_115 0x1CC 0x000 ALT0 0x0
+#define VF610_PAD_PTE10__DCU0_R5 0x1CC 0x000 ALT1 0x0
+#define VF610_PAD_PTE10__SRC_RCON3 0x1CC 0x000 ALT3 0x0
+#define VF610_PAD_PTE10__LCD10 0x1CC 0x000 ALT4 0x0
+#define VF610_PAD_PTE10__DEBUG_OUT39 0x1CC 0x000 ALT7 0x0
+#define VF610_PAD_PTE11__GPIO_116 0x1D0 0x000 ALT0 0x0
+#define VF610_PAD_PTE11__DCU0_R6 0x1D0 0x000 ALT1 0x0
+#define VF610_PAD_PTE11__SRC_RCON4 0x1D0 0x000 ALT3 0x0
+#define VF610_PAD_PTE11__LCD11 0x1D0 0x000 ALT4 0x0
+#define VF610_PAD_PTE11__DEBUG_OUT40 0x1D0 0x000 ALT7 0x0
+#define VF610_PAD_PTE12__GPIO_117 0x1D4 0x000 ALT0 0x0
+#define VF610_PAD_PTE12__DCU0_R7 0x1D4 0x000 ALT1 0x0
+#define VF610_PAD_PTE12__DSPI1_CS3 0x1D4 0x000 ALT2 0x0
+#define VF610_PAD_PTE12__SRC_RCON5 0x1D4 0x000 ALT3 0x0
+#define VF610_PAD_PTE12__LCD12 0x1D4 0x000 ALT4 0x0
+#define VF610_PAD_PTE12__LPT_ALT0 0x1D4 0x000 ALT7 0x0
+#define VF610_PAD_PTE13__GPIO_118 0x1D8 0x000 ALT0 0x0
+#define VF610_PAD_PTE13__DCU0_G0 0x1D8 0x000 ALT1 0x0
+#define VF610_PAD_PTE13__LCD13 0x1D8 0x000 ALT4 0x0
+#define VF610_PAD_PTE13__DEBUG_OUT41 0x1D8 0x000 ALT7 0x0
+#define VF610_PAD_PTE14__GPIO_119 0x1DC 0x000 ALT0 0x0
+#define VF610_PAD_PTE14__DCU0_G1 0x1DC 0x000 ALT1 0x0
+#define VF610_PAD_PTE14__LCD14 0x1DC 0x000 ALT4 0x0
+#define VF610_PAD_PTE14__DEBUG_OUT42 0x1DC 0x000 ALT7 0x0
+#define VF610_PAD_PTE15__GPIO_120 0x1E0 0x000 ALT0 0x0
+#define VF610_PAD_PTE15__DCU0_G2 0x1E0 0x000 ALT1 0x0
+#define VF610_PAD_PTE15__SRC_RCON6 0x1E0 0x000 ALT3 0x0
+#define VF610_PAD_PTE15__LCD15 0x1E0 0x000 ALT4 0x0
+#define VF610_PAD_PTE15__DEBUG_OUT43 0x1E0 0x000 ALT7 0x0
+#define VF610_PAD_PTE16__GPIO_121 0x1E4 0x000 ALT0 0x0
+#define VF610_PAD_PTE16__DCU0_G3 0x1E4 0x000 ALT1 0x0
+#define VF610_PAD_PTE16__SRC_RCON7 0x1E4 0x000 ALT3 0x0
+#define VF610_PAD_PTE16__LCD16 0x1E4 0x000 ALT4 0x0
+#define VF610_PAD_PTE17__GPIO_122 0x1E8 0x000 ALT0 0x0
+#define VF610_PAD_PTE17__DCU0_G4 0x1E8 0x000 ALT1 0x0
+#define VF610_PAD_PTE17__SRC_RCON8 0x1E8 0x000 ALT3 0x0
+#define VF610_PAD_PTE17__LCD17 0x1E8 0x000 ALT4 0x0
+#define VF610_PAD_PTE18__GPIO_123 0x1EC 0x000 ALT0 0x0
+#define VF610_PAD_PTE18__DCU0_G5 0x1EC 0x000 ALT1 0x0
+#define VF610_PAD_PTE18__SRC_RCON9 0x1EC 0x000 ALT3 0x0
+#define VF610_PAD_PTE18__LCD18 0x1EC 0x000 ALT4 0x0
+#define VF610_PAD_PTE19__GPIO_124 0x1F0 0x000 ALT0 0x0
+#define VF610_PAD_PTE19__DCU0_G6 0x1F0 0x000 ALT1 0x0
+#define VF610_PAD_PTE19__SRC_RCON10 0x1F0 0x000 ALT3 0x0
+#define VF610_PAD_PTE19__LCD19 0x1F0 0x000 ALT4 0x0
+#define VF610_PAD_PTE19__I2C0_SCL 0x1F0 0x33C ALT5 0x3
+#define VF610_PAD_PTE20__GPIO_125 0x1F4 0x000 ALT0 0x0
+#define VF610_PAD_PTE20__DCU0_G7 0x1F4 0x000 ALT1 0x0
+#define VF610_PAD_PTE20__SRC_RCON11 0x1F4 0x000 ALT3 0x0
+#define VF610_PAD_PTE20__LCD20 0x1F4 0x000 ALT4 0x0
+#define VF610_PAD_PTE20__I2C0_SDA 0x1F4 0x340 ALT5 0x3
+#define VF610_PAD_PTE20__EWM_IN 0x1F4 0x000 ALT7 0x0
+#define VF610_PAD_PTE21__GPIO_126 0x1F8 0x000 ALT0 0x0
+#define VF610_PAD_PTE21__DCU0_B0 0x1F8 0x000 ALT1 0x0
+#define VF610_PAD_PTE21__LCD21 0x1F8 0x000 ALT4 0x0
+#define VF610_PAD_PTE22__GPIO_127 0x1FC 0x000 ALT0 0x0
+#define VF610_PAD_PTE22__DCU0_B1 0x1FC 0x000 ALT1 0x0
+#define VF610_PAD_PTE22__LCD22 0x1FC 0x000 ALT4 0x0
+#define VF610_PAD_PTE23__GPIO_128 0x200 0x000 ALT0 0x0
+#define VF610_PAD_PTE23__DCU0_B2 0x200 0x000 ALT1 0x0
+#define VF610_PAD_PTE23__SRC_RCON12 0x200 0x000 ALT3 0x0
+#define VF610_PAD_PTE23__LCD23 0x200 0x000 ALT4 0x0
+#define VF610_PAD_PTE24__GPIO_129 0x204 0x000 ALT0 0x0
+#define VF610_PAD_PTE24__DCU0_B3 0x204 0x000 ALT1 0x0
+#define VF610_PAD_PTE24__SRC_RCON13 0x204 0x000 ALT3 0x0
+#define VF610_PAD_PTE24__LCD24 0x204 0x000 ALT4 0x0
+#define VF610_PAD_PTE25__GPIO_130 0x208 0x000 ALT0 0x0
+#define VF610_PAD_PTE25__DCU0_B4 0x208 0x000 ALT1 0x0
+#define VF610_PAD_PTE25__SRC_RCON14 0x208 0x000 ALT3 0x0
+#define VF610_PAD_PTE25__LCD25 0x208 0x000 ALT4 0x0
+#define VF610_PAD_PTE26__GPIO_131 0x20C 0x000 ALT0 0x0
+#define VF610_PAD_PTE26__DCU0_B5 0x20C 0x000 ALT1 0x0
+#define VF610_PAD_PTE26__SRC_RCON15 0x20C 0x000 ALT3 0x0
+#define VF610_PAD_PTE26__LCD26 0x20C 0x000 ALT4 0x0
+#define VF610_PAD_PTE27__GPIO_132 0x210 0x000 ALT0 0x0
+#define VF610_PAD_PTE27__DCU0_B6 0x210 0x000 ALT1 0x0
+#define VF610_PAD_PTE27__SRC_RCON16 0x210 0x000 ALT3 0x0
+#define VF610_PAD_PTE27__LCD27 0x210 0x000 ALT4 0x0
+#define VF610_PAD_PTE27__I2C1_SCL 0x210 0x344 ALT5 0x3
+#define VF610_PAD_PTE28__GPIO_133 0x214 0x000 ALT0 0x0
+#define VF610_PAD_PTE28__DCU0_B7 0x214 0x000 ALT1 0x0
+#define VF610_PAD_PTE28__SRC_RCON17 0x214 0x000 ALT3 0x0
+#define VF610_PAD_PTE28__LCD28 0x214 0x000 ALT4 0x0
+#define VF610_PAD_PTE28__I2C1_SDA 0x214 0x348 ALT5 0x3
+#define VF610_PAD_PTE28__EWM_OUT 0x214 0x000 ALT7 0x0
+#define VF610_PAD_PTA7__GPIO_134 0x218 0x000 ALT0 0x0
+#define VF610_PAD_PTA7__VIU_PIX_CLK 0x218 0x3AC ALT1 0x1
+
+#endif
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "VF610 Tower Board";
+ compatible = "fsl,vf610-twr", "fsl,vf610";
+
+ chosen {
+ bootargs = "console=ttyLP1,115200";
+ };
+
+ memory {
+ reg = <0x80000000 0x8000000>;
+ };
+
+ clocks {
+ audio_ext {
+ compatible = "fixed-clock";
+ clock-frequency = <24576000>;
+ };
+
+ enet_ext {
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+};
+
+&fec0 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec0_1>;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1_1>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "skeleton.dtsi"
+#include "vf610-pinfunc.h"
+#include <dt-bindings/clock/vf610-clock.h>
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a5";
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sxosc {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ fxosc {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ aips0: aips-bus@40000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ reg = <0x40000000 0x70000>;
+ ranges;
+
+ intc: interrupt-controller@40002000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ reg = <0x40003000 0x1000>,
+ <0x40002100 0x100>;
+ };
+
+ L2: l2-cache@40006000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x40006000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ arm,data-latency = <1 1 1>;
+ arm,tag-latency = <2 2 2>;
+ };
+
+ uart0: serial@40027000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40027000 0x1000>;
+ interrupts = <0 61 0x00>;
+ clocks = <&clks VF610_CLK_UART0>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ uart1: serial@40028000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40028000 0x1000>;
+ interrupts = <0 62 0x04>;
+ clocks = <&clks VF610_CLK_UART1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ uart2: serial@40029000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40029000 0x1000>;
+ interrupts = <0 63 0x04>;
+ clocks = <&clks VF610_CLK_UART2>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ uart3: serial@4002a000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x4002a000 0x1000>;
+ interrupts = <0 64 0x04>;
+ clocks = <&clks VF610_CLK_UART3>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ sai2: sai@40031000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x40031000 0x1000>;
+ interrupts = <0 86 0x04>;
+ clocks = <&clks VF610_CLK_SAI2>;
+ clock-names = "sai";
+ status = "disabled";
+ };
+
+ pit: pit@40037000 {
+ compatible = "fsl,vf610-pit";
+ reg = <0x40037000 0x1000>;
+ interrupts = <0 39 0x04>;
+ clocks = <&clks VF610_CLK_PIT>;
+ clock-names = "pit";
+ };
+
+ wdog@4003e000 {
+ compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
+ reg = <0x4003e000 0x1000>;
+ clocks = <&clks VF610_CLK_WDT>;
+ clock-names = "wdog";
+ };
+
+ qspi0: quadspi@40044000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-qspi";
+ reg = <0x40044000 0x1000>;
+ interrupts = <0 24 0x04>;
+ clocks = <&clks VF610_CLK_QSPI0_EN>,
+ <&clks VF610_CLK_QSPI0>;
+ clock-names = "qspi_en", "qspi";
+ status = "disabled";
+ };
+
+ iomuxc: iomuxc@40048000 {
+ compatible = "fsl,vf610-iomuxc";
+ reg = <0x40048000 0x1000>;
+ #gpio-range-cells = <3>;
+
+ /* functions and groups pins */
+
+ dcu0 {
+ pinctrl_dcu0_1: dcu0grp_1 {
+ fsl,pins = <
+ VF610_PAD_PTB8__GPIO_30 0x42
+ VF610_PAD_PTE0__DCU0_HSYNC 0x42
+ VF610_PAD_PTE1__DCU0_VSYNC 0x42
+ VF610_PAD_PTE2__DCU0_PCLK 0x42
+ VF610_PAD_PTE4__DCU0_DE 0x42
+ VF610_PAD_PTE5__DCU0_R0 0x42
+ VF610_PAD_PTE6__DCU0_R1 0x42
+ VF610_PAD_PTE7__DCU0_R2 0x42
+ VF610_PAD_PTE8__DCU0_R3 0x42
+ VF610_PAD_PTE9__DCU0_R4 0x42
+ VF610_PAD_PTE10__DCU0_R5 0x42
+ VF610_PAD_PTE11__DCU0_R6 0x42
+ VF610_PAD_PTE12__DCU0_R7 0x42
+ VF610_PAD_PTE13__DCU0_G0 0x42
+ VF610_PAD_PTE14__DCU0_G1 0x42
+ VF610_PAD_PTE15__DCU0_G2 0x42
+ VF610_PAD_PTE16__DCU0_G3 0x42
+ VF610_PAD_PTE17__DCU0_G4 0x42
+ VF610_PAD_PTE18__DCU0_G5 0x42
+ VF610_PAD_PTE19__DCU0_G6 0x42
+ VF610_PAD_PTE20__DCU0_G7 0x42
+ VF610_PAD_PTE21__DCU0_B0 0x42
+ VF610_PAD_PTE22__DCU0_B1 0x42
+ VF610_PAD_PTE23__DCU0_B2 0x42
+ VF610_PAD_PTE24__DCU0_B3 0x42
+ VF610_PAD_PTE25__DCU0_B4 0x42
+ VF610_PAD_PTE26__DCU0_B5 0x42
+ VF610_PAD_PTE27__DCU0_B6 0x42
+ VF610_PAD_PTE28__DCU0_B7 0x42
+ >;
+ };
+ };
+
+ dspi0 {
+ pinctrl_dspi0_1: dspi0grp_1 {
+ fsl,pins = <
+ VF610_PAD_PTB19__DSPI0_CS0 0x1182
+ VF610_PAD_PTB20__DSPI0_SIN 0x1181
+ VF610_PAD_PTB21__DSPI0_SOUT 0x1182
+ VF610_PAD_PTB22__DSPI0_SCK 0x1182
+ >;
+ };
+ };
+
+ esdhc1 {
+ pinctrl_esdhc1_1: esdhc1grp_1 {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTA7__GPIO_134 0x219d
+ >;
+ };
+ };
+
+ fec0 {
+ pinctrl_fec0_1: fec0grp_1 {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3
+ VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1
+ VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
+ VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
+ VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
+ VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
+ VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
+ VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
+ VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
+ >;
+ };
+ };
+
+ fec1 {
+ pinctrl_fec1_1: fec1grp_1 {
+ fsl,pins = <
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+ };
+
+ i2c0 {
+ pinctrl_i2c0_1: i2c0grp_1 {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x30d3
+ VF610_PAD_PTB15__I2C0_SDA 0x30d3
+ >;
+ };
+ };
+
+ pwm0 {
+ pinctrl_pwm0_1: pwm0grp_1 {
+ fsl,pins = <
+ VF610_PAD_PTB0__FTM0_CH0 0x1582
+ VF610_PAD_PTB1__FTM0_CH1 0x1582
+ VF610_PAD_PTB2__FTM0_CH2 0x1582
+ VF610_PAD_PTB3__FTM0_CH3 0x1582
+ VF610_PAD_PTB6__FTM0_CH6 0x1582
+ VF610_PAD_PTB7__FTM0_CH7 0x1582
+ >;
+ };
+ };
+
+ qspi0 {
+ pinctrl_qspi0_1: qspi0grp_1 {
+ fsl,pins = <
+ VF610_PAD_PTD0__QSPI0_A_QSCK 0x307b
+ VF610_PAD_PTD1__QSPI0_A_CS0 0x307f
+ VF610_PAD_PTD2__QSPI0_A_DATA3 0x3073
+ VF610_PAD_PTD3__QSPI0_A_DATA2 0x3073
+ VF610_PAD_PTD4__QSPI0_A_DATA1 0x3073
+ VF610_PAD_PTD5__QSPI0_A_DATA0 0x307b
+ VF610_PAD_PTD7__QSPI0_B_QSCK 0x307b
+ VF610_PAD_PTD8__QSPI0_B_CS0 0x307f
+ VF610_PAD_PTD9__QSPI0_B_DATA3 0x3073
+ VF610_PAD_PTD10__QSPI0_B_DATA2 0x3073
+ VF610_PAD_PTD11__QSPI0_B_DATA1 0x3073
+ VF610_PAD_PTD12__QSPI0_B_DATA0 0x307b
+ >;
+ };
+ };
+
+ sai2 {
+ pinctrl_sai2_1: sai2grp_1 {
+ fsl,pins = <
+ VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed
+ VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee
+ VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed
+ VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed
+ VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed
+ VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed
+ VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp_1 {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
+ };
+ };
+
+ usbvbus {
+ pinctrl_usbvbus_1: usbvbusgrp_1 {
+ fsl,pins = <
+ VF610_PAD_PTA24__USB1_VBUS_EN 0x219c
+ VF610_PAD_PTA16__USB0_VBUS_EN 0x219c
+ >;
+ };
+ };
+
+ };
+
+ gpio1: gpio@40049000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x40049000 0x1000 0x400ff000 0x40>;
+ interrupts = <0 107 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 0 32>;
+ };
+
+ gpio2: gpio@4004a000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x4004a000 0x1000 0x400ff040 0x40>;
+ interrupts = <0 108 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 32 32>;
+ };
+
+ gpio3: gpio@4004b000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x4004b000 0x1000 0x400ff080 0x40>;
+ interrupts = <0 109 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 64 32>;
+ };
+
+ gpio4: gpio@4004c000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
+ interrupts = <0 110 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 96 32>;
+ };
+
+ gpio5: gpio@4004d000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x4004d000 0x1000 0x400ff100 0x40>;
+ interrupts = <0 111 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 128 7>;
+ };
+
+ anatop@40050000 {
+ compatible = "fsl,vf610-anatop";
+ reg = <0x40050000 0x1000>;
+ };
+
+ i2c0: i2c@40066000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-i2c";
+ reg = <0x40066000 0x1000>;
+ interrupts =<0 71 0x04>;
+ clocks = <&clks VF610_CLK_I2C0>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ clks: ccm@4006b000 {
+ compatible = "fsl,vf610-ccm";
+ reg = <0x4006b000 0x1000>;
+ #clock-cells = <1>;
+ };
+ };
+
+ aips1: aips-bus@40080000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40080000 0x80000>;
+ ranges;
+
+ uart4: serial@400a9000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x400a9000 0x1000>;
+ interrupts = <0 65 0x04>;
+ clocks = <&clks VF610_CLK_UART4>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ uart5: serial@400aa000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x400aa000 0x1000>;
+ interrupts = <0 66 0x04>;
+ clocks = <&clks VF610_CLK_UART5>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ fec0: ethernet@400d0000 {
+ compatible = "fsl,mvf600-fec";
+ reg = <0x400d0000 0x1000>;
+ interrupts = <0 78 0x04>;
+ clocks = <&clks VF610_CLK_ENET>,
+ <&clks VF610_CLK_ENET>,
+ <&clks VF610_CLK_ENET>;
+ clock-names = "ipg", "ahb", "ptp";
+ status = "disabled";
+ };
+
+ fec1: ethernet@400d1000 {
+ compatible = "fsl,mvf600-fec";
+ reg = <0x400d1000 0x1000>;
+ interrupts = <0 79 0x04>;
+ clocks = <&clks VF610_CLK_ENET>,
+ <&clks VF610_CLK_ENET>,
+ <&clks VF610_CLK_ENET>;
+ clock-names = "ipg", "ahb", "ptp";
+ status = "disabled";
+ };
+ };
+ };
+};
};
};
};
+
+&uart0 {
+ status = "okay";
+};
/ {
compatible = "via,vt8500";
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ device_type = "cpu";
+ compatible = "arm,arm926ej-s";
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xd8050400 0x100>;
};
- uart@d8200000 {
+ uart0: serial@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
+ status = "disabled";
};
- uart@d82b0000 {
+ uart1: serial@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
+ status = "disabled";
};
- uart@d8210000 {
+ uart2: serial@d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&clkuart2>;
+ status = "disabled";
};
- uart@d82c0000 {
+ uart3: serial@d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&clkuart3>;
+ status = "disabled";
};
rtc@d8100000 {
};
};
};
+
+&uart0 {
+ status = "okay";
+};
compatible = "wm,wm8505";
cpus {
- cpu@0 {
- compatible = "arm,arm926ejs";
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ device_type = "cpu";
+ compatible = "arm,arm926ej-s";
};
};
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
clock-frequency = <25000000>;
};
+ plla: plla {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x200>;
+ };
+
pllb: pllb {
#clock-cells = <0>;
compatible = "via,vt8500-pll-clock";
reg = <0x204>;
};
+ pllc: pllc {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x208>;
+ };
+
+ plld: plld {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x20c>;
+ };
+
+ clkarm: arm {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&plla>;
+ divisor-reg = <0x300>;
+ };
+
+ clkahb: ahb {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x304>;
+ };
+
+ clkapb: apb {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x350>;
+ };
+
+ clkddr: ddr {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&plld>;
+ divisor-reg = <0x310>;
+ };
+
clkuart0: uart0 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
reg = <0xd8050400 0x100>;
};
- uart@d8200000 {
+ uart0: serial@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
+ status = "disabled";
};
- uart@d82b0000 {
+ uart1: serial@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
+ status = "disabled";
};
- uart@d8210000 {
+ uart2: serial@d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&clkuart2>;
+ status = "disabled";
};
- uart@d82c0000 {
+ uart3: serial@d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&clkuart3>;
+ status = "disabled";
};
- uart@d8370000 {
+ uart4: serial@d8370000 {
compatible = "via,vt8500-uart";
reg = <0xd8370000 0x1040>;
interrupts = <31>;
clocks = <&clkuart4>;
+ status = "disabled";
};
- uart@d8380000 {
+ uart5: serial@d8380000 {
compatible = "via,vt8500-uart";
reg = <0xd8380000 0x1040>;
interrupts = <30>;
clocks = <&clkuart5>;
+ status = "disabled";
};
rtc@d8100000 {
};
};
+&uart0 {
+ status = "okay";
+};
/ {
compatible = "wm,wm8650";
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ device_type = "cpu";
+ compatible = "arm,arm926ej-s";
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x204>;
};
+ pllc: pllc {
+ #clock-cells = <0>;
+ compatible = "wm,wm8650-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x208>;
+ };
+
+ plld: plld {
+ #clock-cells = <0>;
+ compatible = "wm,wm8650-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x20c>;
+ };
+
+ plle: plle {
+ #clock-cells = <0>;
+ compatible = "wm,wm8650-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x210>;
+ };
+
+ clkarm: arm {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&plla>;
+ divisor-reg = <0x300>;
+ };
+
+ clkahb: ahb {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x304>;
+ };
+
+ clkapb: apb {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x320>;
+ };
+
+ clkddr: ddr {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&plld>;
+ divisor-reg = <0x310>;
+ };
+
clkuart0: uart0 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
enable-bit = <2>;
};
- arm: arm {
- #clock-cells = <0>;
- compatible = "via,vt8500-device-clock";
- clocks = <&plla>;
- divisor-reg = <0x300>;
- };
-
- sdhc: sdhc {
+ clksdhc: sdhc {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&pllb>;
reg = <0xd8050400 0x100>;
};
- uart@d8200000 {
+ uart0: serial@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
+ status = "disabled";
};
- uart@d82b0000 {
+ uart1: serial@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
+ status = "disabled";
};
rtc@d8100000 {
--- /dev/null
+/*
+ * wm8750-apc8750.dts
+ * - Device tree file for VIA APC8750
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "wm8750.dtsi"
+
+/ {
+ model = "VIA APC8750";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c>;
+
+ i2c: i2c {
+ wm,pins = <168 169 170 171>;
+ wm,function = <2>; /* alt */
+ wm,pull = <2>; /* pull-up */
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * wm8750.dtsi - Device tree file for Wondermedia WM8750 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "wm,wm8750";
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ device_type = "cpu";
+ compatible = "arm,arm1176ej-s";
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ i2c0 = &i2c_0;
+ i2c1 = &i2c_1;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+ interrupt-parent = <&intc0>;
+
+ intc0: interrupt-controller@d8140000 {
+ compatible = "via,vt8500-intc";
+ interrupt-controller;
+ reg = <0xd8140000 0x10000>;
+ #interrupt-cells = <1>;
+ };
+
+ /* Secondary IC cascaded to intc0 */
+ intc1: interrupt-controller@d8150000 {
+ compatible = "via,vt8500-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xD8150000 0x10000>;
+ interrupts = <56 57 58 59 60 61 62 63>;
+ };
+
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8750-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pmc@d8130000 {
+ compatible = "via,vt8500-pmc";
+ reg = <0xd8130000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ref24: ref24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ ref25: ref25M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ plla: plla {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x200>;
+ };
+
+ pllb: pllb {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x204>;
+ };
+
+ pllc: pllc {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x208>;
+ };
+
+ plld: plld {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x20C>;
+ };
+
+ plle: plle {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x210>;
+ };
+
+ clkarm: arm {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&plla>;
+ divisor-reg = <0x300>;
+ };
+
+ clkahb: ahb {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x304>;
+ };
+
+ clkapb: apb {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x320>;
+ };
+
+ clkddr: ddr {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&plld>;
+ divisor-reg = <0x310>;
+ };
+
+ clkuart0: uart0 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <24>;
+ };
+
+ clkuart1: uart1 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <25>;
+ };
+
+ clkuart2: uart2 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <26>;
+ };
+
+ clkuart3: uart3 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <27>;
+ };
+
+ clkuart4: uart4 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <28>;
+ };
+
+ clkuart5: uart5 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <29>;
+ };
+
+ clkpwm: pwm {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x350>;
+ enable-reg = <0x250>;
+ enable-bit = <17>;
+ };
+
+ clksdhc: sdhc {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x330>;
+ divisor-mask = <0x3f>;
+ enable-reg = <0x250>;
+ enable-bit = <0>;
+ };
+
+ clki2c0: i2c0clk {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x3A0>;
+ enable-reg = <0x250>;
+ enable-bit = <8>;
+ };
+
+ clki2c1: i2c1clk {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x3A4>;
+ enable-reg = <0x250>;
+ enable-bit = <9>;
+ };
+ };
+ };
+
+ pwm: pwm@d8220000 {
+ #pwm-cells = <3>;
+ compatible = "via,vt8500-pwm";
+ reg = <0xd8220000 0x100>;
+ clocks = <&clkpwm>;
+ };
+
+ timer@d8130100 {
+ compatible = "via,vt8500-timer";
+ reg = <0xd8130100 0x28>;
+ interrupts = <36>;
+ };
+
+ ehci@d8007900 {
+ compatible = "via,vt8500-ehci";
+ reg = <0xd8007900 0x200>;
+ interrupts = <26>;
+ };
+
+ uhci@d8007b00 {
+ compatible = "platform-uhci";
+ reg = <0xd8007b00 0x200>;
+ interrupts = <26>;
+ };
+
+ uhci@d8008d00 {
+ compatible = "platform-uhci";
+ reg = <0xd8008d00 0x200>;
+ interrupts = <26>;
+ };
+
+ uart0: serial@d8200000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8200000 0x1040>;
+ interrupts = <32>;
+ clocks = <&clkuart0>;
+ status = "disabled";
+ };
+
+ uart1: serial@d82b0000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd82b0000 0x1040>;
+ interrupts = <33>;
+ clocks = <&clkuart1>;
+ status = "disabled";
+ };
+
+ uart2: serial@d8210000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8210000 0x1040>;
+ interrupts = <47>;
+ clocks = <&clkuart2>;
+ status = "disabled";
+ };
+
+ uart3: serial@d82c0000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd82c0000 0x1040>;
+ interrupts = <50>;
+ clocks = <&clkuart3>;
+ status = "disabled";
+ };
+
+ uart4: serial@d8370000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8370000 0x1040>;
+ interrupts = <30>;
+ clocks = <&clkuart4>;
+ status = "disabled";
+ };
+
+ uart5: serial@d8380000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8380000 0x1040>;
+ interrupts = <43>;
+ clocks = <&clkuart5>;
+ status = "disabled";
+ };
+
+ rtc@d8100000 {
+ compatible = "via,vt8500-rtc";
+ reg = <0xd8100000 0x10000>;
+ interrupts = <48>;
+ };
+
+ sdhc@d800a000 {
+ compatible = "wm,wm8505-sdhc";
+ reg = <0xd800a000 0x1000>;
+ interrupts = <20 21>;
+ clocks = <&clksdhc>;
+ bus-width = <4>;
+ sdon-inverted;
+ };
+
+ i2c_0: i2c@d8280000 {
+ compatible = "wm,wm8505-i2c";
+ reg = <0xd8280000 0x1000>;
+ interrupts = <19>;
+ clocks = <&clki2c0>;
+ clock-frequency = <400000>;
+ };
+
+ i2c_1: i2c@d8320000 {
+ compatible = "wm,wm8505-i2c";
+ reg = <0xd8320000 0x1000>;
+ interrupts = <18>;
+ clocks = <&clki2c1>;
+ clock-frequency = <400000>;
+ };
+ };
+};
};
};
};
+
+&uart0 {
+ status = "okay";
+};
/ {
compatible = "wm,wm8850";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x0>;
+ };
+ };
+
aliases {
serial0 = &uart0;
serial1 = &uart1;
plla: plla {
#clock-cells = <0>;
- compatible = "wm,wm8750-pll-clock";
- clocks = <&ref25>;
+ compatible = "wm,wm8850-pll-clock";
+ clocks = <&ref24>;
reg = <0x200>;
};
pllb: pllb {
#clock-cells = <0>;
- compatible = "wm,wm8750-pll-clock";
- clocks = <&ref25>;
+ compatible = "wm,wm8850-pll-clock";
+ clocks = <&ref24>;
reg = <0x204>;
};
+ pllc: pllc {
+ #clock-cells = <0>;
+ compatible = "wm,wm8850-pll-clock";
+ clocks = <&ref24>;
+ reg = <0x208>;
+ };
+
+ plld: plld {
+ #clock-cells = <0>;
+ compatible = "wm,wm8850-pll-clock";
+ clocks = <&ref24>;
+ reg = <0x20c>;
+ };
+
+ plle: plle {
+ #clock-cells = <0>;
+ compatible = "wm,wm8850-pll-clock";
+ clocks = <&ref24>;
+ reg = <0x210>;
+ };
+
+ pllf: pllf {
+ #clock-cells = <0>;
+ compatible = "wm,wm8850-pll-clock";
+ clocks = <&ref24>;
+ reg = <0x214>;
+ };
+
+ pllg: pllg {
+ #clock-cells = <0>;
+ compatible = "wm,wm8850-pll-clock";
+ clocks = <&ref24>;
+ reg = <0x218>;
+ };
+
+ clkarm: arm {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&plla>;
+ divisor-reg = <0x300>;
+ };
+
+ clkahb: ahb {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x304>;
+ };
+
+ clkapb: apb {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x320>;
+ };
+
+ clkddr: ddr {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&plld>;
+ divisor-reg = <0x310>;
+ };
+
clkuart0: uart0 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
interrupts = <26>;
};
- uart0: uart@d8200000 {
+ uart0: serial@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
+ status = "disabled";
};
- uart1: uart@d82b0000 {
+ uart1: serial@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
+ status = "disabled";
};
- uart2: uart@d8210000 {
+ uart2: serial@d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&clkuart2>;
+ status = "disabled";
};
- uart3: uart@d82c0000 {
+ uart3: serial@d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&clkuart3>;
+ status = "disabled";
};
rtc@d8100000 {
uart0: uart@e0000000 {
compatible = "xlnx,xuartps";
+ status = "disabled";
clocks = <&clkc 23>, <&clkc 40>;
clock-names = "ref_clk", "aper_clk";
reg = <0xE0000000 0x1000>;
uart1: uart@e0001000 {
compatible = "xlnx,xuartps";
+ status = "disabled";
clocks = <&clkc 24>, <&clkc 41>;
clock-names = "ref_clk", "aper_clk";
reg = <0xE0001000 0x1000>;
};
chosen {
- bootargs = "console=ttyPS1,115200 earlyprintk";
+ bootargs = "console=ttyPS0,115200 earlyprintk";
};
};
+
+&uart1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright (C) 2011 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ * Copyright (C) 2013 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq ZC706 Development Board";
+ compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyPS0,115200 earlyprintk";
+ };
+
+};
+
+&uart1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright (C) 2011 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ * Copyright (C) 2013 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq Zed Development Board";
+ compatible = "xlnx,zynq-7000";
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyPS0,115200 earlyprintk";
+ };
+
+};
+
+&uart1 {
+ status = "okay";
+};
CONFIG_USB_G_SERIAL=y
CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_SPI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_DMADEVICES=y
CONFIG_MACH_CAM60=y
CONFIG_MACH_SAM9_L9260=y
CONFIG_MACH_AFEB9260=y
-CONFIG_MACH_USB_A9260=y
CONFIG_MACH_QIL_A9260=y
CONFIG_MACH_CPU9260=y
CONFIG_MACH_FLEXIBITY=y
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9263=y
CONFIG_MACH_AT91SAM9263EK=y
-CONFIG_MACH_USB_A9263=y
CONFIG_MTD_AT91_DATAFLASH_CARD=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_MMC=y
CONFIG_MMC_CLKGATE=y
CONFIG_MMC_ARMMMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PL031=y
CONFIG_DMADEVICES=y
<svn://194.85.238.22/home/users/george/svn/arm9eb>
<http://groups.google.com/group/arm9fpga-evolution-board>
-config MACH_USB_A9260
- bool "CALAO USB-A9260"
- help
- Select this if you are using a Calao Systems USB-A9260.
- <http://www.calao-systems.com>
-
config MACH_QIL_A9260
bool "CALAO QIL-A9260 board"
help
produced by GeoSIG Ltd company. This is an internet accelerograph.
<http://www.geosig.com>
-config MACH_USB_A9G20
- bool "CALAO USB-A9G20"
- depends on ARCH_AT91SAM9G20
- help
- Select this if you are using a Calao Systems USB-A9G20.
- <http://www.calao-systems.com>
-
config MACH_SNAPPER_9260
bool "Bluewater Systems Snapper 9260/9G20 module"
help
Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-config MACH_USB_A9263
- bool "CALAO USB-A9263"
- help
- Select this if you are using a Calao Systems USB-A9263.
- <http://www.calao-systems.com>
-
endif
# ----------------------------------------------------------
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
obj-$(CONFIG_MACH_CAM60) += board-cam60.o
obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
-obj-$(CONFIG_MACH_USB_A9260) += board-usb-a926x.o
obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o
# AT91SAM9RL board-specific support
obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o
-obj-$(CONFIG_MACH_USB_A9G20) += board-usb-a926x.o
# AT91SAM9260/AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
+ CLKDEV_CON_DEV_ID("hclk", "600000.gadget", &utmi_clk),
+ CLKDEV_CON_DEV_ID("pclk", "600000.gadget", &udphs_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
+ CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
};
/*
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-usb-a926x.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2007 Atmel Corporation.
- * Copyright (C) 2007 Calao-systems
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/spi/mmc_spi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-
-#include "at91_aic.h"
-#include "at91_shdwc.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 12.00 MHz crystal */
- at91_initialize(12000000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PB11,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-static void __init ek_add_device_udc(void)
-{
- if (machine_is_usb_a9260() || machine_is_usb_a9g20())
- ek_udc_data.vbus_pin = AT91_PIN_PC5;
-
- at91_add_device_udc(&ek_udc_data);
-}
-
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
-#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4
-static int at91_mmc_spi_init(struct device *dev,
- irqreturn_t (*detect_int)(int, void *), void *data)
-{
- /* Configure Interrupt pin as input, no pull-up */
- at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0);
- return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int,
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "mmc-spi-detect", data);
-}
-
-static void at91_mmc_spi_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data);
-}
-
-static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
- .init = at91_mmc_spi_init,
- .exit = at91_mmc_spi_exit,
- .detect_delay = 100, /* msecs */
-};
-#endif
-
-/*
- * SPI devices.
- */
-static struct spi_board_info usb_a9263_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- }
-};
-
-static struct spi_board_info usb_a9g20_spi_devices[] = {
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
- {
- .modalias = "mmc_spi",
- .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = &at91_mmc_spi_pdata,
- .mode = SPI_MODE_3,
- },
-#endif
-};
-
-static void __init ek_add_device_spi(void)
-{
- if (machine_is_usb_a9263())
- at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices));
- else if (machine_is_usb_a9g20())
- at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices));
-}
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PE31,
- .is_rmii = 1,
-};
-
-static void __init ek_add_device_eth(void)
-{
- if (machine_is_usb_a9260() || machine_is_usb_a9g20())
- ek_macb_data.phy_irq_pin = AT91_PIN_PA31;
-
- at91_add_device_eth(&ek_macb_data);
-}
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "barebox",
- .offset = 0,
- .size = 3 * SZ_128K,
- }, {
- .name = "bareboxenv",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_128K,
- }, {
- .name = "bareboxenv2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_128K,
- }, {
- .name = "oftree",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_128K,
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 4 * SZ_1M,
- }, {
- .name = "rootfs",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- }, {
- .name = "data",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PA22,
- .enable_pin = AT91_PIN_PD15,
- .ecc_mode = NAND_ECC_SOFT,
- .on_flash_bbt = 1,
- .parts = ek_nand_partition,
- .num_parts = ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 3,
-};
-
-static void __init ek_add_device_nand(void)
-{
- if (machine_is_usb_a9260() || machine_is_usb_a9g20()) {
- ek_nand_data.rdy_pin = AT91_PIN_PC13;
- ek_nand_data.enable_pin = AT91_PIN_PC14;
- }
-
- /* configure chip-select 3 (NAND) */
- if (machine_is_usb_a9g20())
- sam9_smc_configure(0, 3, &usb_a9g20_nand_smc_config);
- else
- sam9_smc_configure(0, 3, &usb_a9260_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- { /* USER PUSH BUTTON */
- .code = KEY_ENTER,
- .gpio = AT91_PIN_PB10,
- .active_low = 1,
- .desc = "user_pb",
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
- at91_set_deglitch(AT91_PIN_PB10, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* user_led (green) */
- .name = "user_led",
- .gpio = AT91_PIN_PB21,
- .active_low = 1,
- .default_trigger = "heartbeat",
- }
-};
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
- {
- I2C_BOARD_INFO("rv3029c2", 0x56),
- },
-};
-
-static void __init ek_add_device_leds(void)
-{
- if (machine_is_usb_a9260() || machine_is_usb_a9g20())
- ek_leds[0].active_low = 0;
-
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-}
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- ek_add_device_udc();
- /* SPI */
- ek_add_device_spi();
- /* Ethernet */
- ek_add_device_eth();
- /* NAND */
- ek_add_device_nand();
- /* Push Buttons */
- ek_add_device_buttons();
- /* LEDs */
- ek_add_device_leds();
-
- if (machine_is_usb_a9g20()) {
- /* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
- } else {
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* shutdown controller, wakeup button (5 msec low) */
- at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
- | AT91_SHDW_WKMODE0_LOW
- | AT91_SHDW_RTTWKEN);
- }
-}
-
-MACHINE_START(USB_A9263, "CALAO USB_A9263")
- /* Maintainer: calao-systems */
- .init_time = at91sam926x_pit_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
-
-MACHINE_START(USB_A9260, "CALAO USB_A9260")
- /* Maintainer: calao-systems */
- .init_time = at91sam926x_pit_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
-
-MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
- /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
- .init_time = at91sam926x_pit_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2");
- clk_register_clkdev(clk[ssi_ext1_gate], "ssi_ext1", NULL);
- clk_register_clkdev(clk[ssi_ext2_gate], "ssi_ext2", NULL);
clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
clk_register_clkdev(clk[cpu_podf], NULL, "cpufreq-cpu0.0");
clk_register_clkdev(clk[iim_gate], "iim", NULL);
#include "hardware.h"
#include "mx53.h"
-static void __init imx53_qsb_init(void)
-{
- struct clk *clk;
-
- clk = clk_get_sys(NULL, "ssi_ext1");
- if (IS_ERR(clk)) {
- pr_err("failed to get clk ssi_ext1\n");
- return;
- }
-
- clk_register_clkdev(clk, NULL, "0-000a");
-}
-
static void __init imx53_dt_init(void)
{
mxc_arch_reset_init_dt();
- if (of_machine_is_compatible("fsl,imx53-qsb"))
- imx53_qsb_init();
-
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
select GENERIC_CLOCKEVENTS
select HAVE_CLK_PREPARE
select PINCTRL
+ select SOC_BUS
select SOC_IMX23
select SOC_IMX28
select STMP_DEVICE
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/init.h>
-#include <linux/irqchip.h>
#include <linux/irqchip/mxs.h>
#include <linux/micrel_phy.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/sys_soc.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2
#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3
+#define HW_DIGCTL_CHIPID 0x310
+#define HW_DIGCTL_CHIPID_MASK (0xffff << 16)
+#define HW_DIGCTL_REV_MASK 0xff
+#define HW_DIGCTL_CHIPID_MX23 (0x3780 << 16)
+#define HW_DIGCTL_CHIPID_MX28 (0x2800 << 16)
+
+#define MXS_CHIP_REVISION_1_0 0x10
+#define MXS_CHIP_REVISION_1_1 0x11
+#define MXS_CHIP_REVISION_1_2 0x12
+#define MXS_CHIP_REVISION_1_3 0x13
+#define MXS_CHIP_REVISION_1_4 0x14
+#define MXS_CHIP_REV_UNKNOWN 0xff
+
#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))
#define MXS_SET_ADDR 0x4
#define MXS_CLR_ADDR 0x8
#define MXS_TOG_ADDR 0xc
+static u32 chipid;
+static u32 socid;
+
static inline void __mxs_setl(u32 mask, void __iomem *reg)
{
__raw_writel(mask, reg + MXS_SET_ADDR);
pinctrl_put(pctl);
}
-static void __init cfa10049_init(void)
+static void __init crystalfontz_init(void)
{
update_fec_mac_prop(OUI_CRYSTALFONTZ);
}
-static void __init cfa10037_init(void)
+static const char __init *mxs_get_soc_id(void)
{
- update_fec_mac_prop(OUI_CRYSTALFONTZ);
+ struct device_node *np;
+ void __iomem *digctl_base;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
+ digctl_base = of_iomap(np, 0);
+ WARN_ON(!digctl_base);
+
+ chipid = readl(digctl_base + HW_DIGCTL_CHIPID);
+ socid = chipid & HW_DIGCTL_CHIPID_MASK;
+
+ iounmap(digctl_base);
+ of_node_put(np);
+
+ switch (socid) {
+ case HW_DIGCTL_CHIPID_MX23:
+ return "i.MX23";
+ case HW_DIGCTL_CHIPID_MX28:
+ return "i.MX28";
+ default:
+ return "Unknown";
+ }
+}
+
+static u32 __init mxs_get_cpu_rev(void)
+{
+ u32 rev = chipid & HW_DIGCTL_REV_MASK;
+
+ switch (socid) {
+ case HW_DIGCTL_CHIPID_MX23:
+ switch (rev) {
+ case 0x0:
+ return MXS_CHIP_REVISION_1_0;
+ case 0x1:
+ return MXS_CHIP_REVISION_1_1;
+ case 0x2:
+ return MXS_CHIP_REVISION_1_2;
+ case 0x3:
+ return MXS_CHIP_REVISION_1_3;
+ case 0x4:
+ return MXS_CHIP_REVISION_1_4;
+ default:
+ return MXS_CHIP_REV_UNKNOWN;
+ }
+ case HW_DIGCTL_CHIPID_MX28:
+ switch (rev) {
+ case 0x0:
+ return MXS_CHIP_REVISION_1_1;
+ case 0x1:
+ return MXS_CHIP_REVISION_1_2;
+ default:
+ return MXS_CHIP_REV_UNKNOWN;
+ }
+ default:
+ return MXS_CHIP_REV_UNKNOWN;
+ }
+}
+
+static const char __init *mxs_get_revision(void)
+{
+ u32 rev = mxs_get_cpu_rev();
+
+ if (rev != MXS_CHIP_REV_UNKNOWN)
+ return kasprintf(GFP_KERNEL, "TO%d.%d", (rev >> 4) & 0xf,
+ rev & 0xf);
+ else
+ return kasprintf(GFP_KERNEL, "%s", "Unknown");
}
static void __init mxs_machine_init(void)
{
+ struct device_node *root;
+ struct device *parent;
+ struct soc_device *soc_dev;
+ struct soc_device_attribute *soc_dev_attr;
+ int ret;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return;
+
+ root = of_find_node_by_path("/");
+ ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
+ if (ret)
+ return;
+
+ soc_dev_attr->family = "Freescale MXS Family";
+ soc_dev_attr->soc_id = mxs_get_soc_id();
+ soc_dev_attr->revision = mxs_get_revision();
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr);
+ return;
+ }
+
+ parent = soc_device_to_device(soc_dev);
+
if (of_machine_is_compatible("fsl,imx28-evk"))
imx28_evk_init();
else if (of_machine_is_compatible("bluegiga,apx4devkit"))
apx4devkit_init();
- else if (of_machine_is_compatible("crystalfontz,cfa10037"))
- cfa10037_init();
- else if (of_machine_is_compatible("crystalfontz,cfa10049"))
- cfa10049_init();
+ else if (of_machine_is_compatible("crystalfontz,cfa10037") ||
+ of_machine_is_compatible("crystalfontz,cfa10049") ||
+ of_machine_is_compatible("crystalfontz,cfa10055") ||
+ of_machine_is_compatible("crystalfontz,cfa10057"))
+ crystalfontz_init();
of_platform_populate(NULL, of_default_bus_match_table,
- mxs_auxdata_lookup, NULL);
+ mxs_auxdata_lookup, parent);
if (of_machine_is_compatible("karo,tx28"))
tx28_post_init();
};
DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
- .init_irq = irqchip_init,
.handle_irq = icoll_handle_irq,
.init_time = mxs_timer_init,
.init_machine = mxs_machine_init,
select ARM_VIC
select CLKSRC_NOMADIK_MTU
select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
+ select CLKSRC_OF
select COMMON_CLK
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <linux/platform_data/clk-nomadik.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/clocksource-nomadik-mtu.h>
+#include <linux/clocksource.h>
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
#include <linux/of_address.h>
#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */
#define NOMADIK_UART1_VBASE 0xF01FB000
-static unsigned long out_low[] = { PIN_OUTPUT_LOW };
-static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
-static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
-static unsigned long in_pullup[] = { PIN_INPUT_PULLUP };
-
-static struct pinctrl_map __initdata nhk8815_pinmap[] = {
- PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"),
- PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"),
- /* Hog in MMC/SD card mux */
- PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"),
- /* MCCLK */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low),
- /* MCCMD */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup),
- /* MCCMDDIR */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high),
- /* MCDAT3-0 */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup),
- /* MCDAT0DIR */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high),
- /* MCDAT31DIR */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high),
- /* MCMSFBCLK */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup),
- /* CD input GPIO */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull),
- /* CD bias drive */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low),
- /* I2C0 */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO62_D3", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO63_D2", in_pullup),
- /* I2C1 */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO53_L4", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO54_L3", in_pullup),
- /* I2C2 */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO73_C21", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup),
-};
-
/* This is needed for LL-debug/earlyprintk/debug-macro.S */
static struct map_desc cpu8815_io_desc[] __initdata = {
{
/* We need this to be up now */
nomadik_clk_init();
- mtu = of_find_node_by_path("/mtu0");
+ mtu = of_find_node_by_path("/mtu@101e2000");
if (!mtu)
return;
base = of_iomap(mtu, 0);
src_cr |= SRC_CR_INIT_VAL;
writel(src_cr, base);
- nmdk_timer_init(base, irq);
+ clocksource_of_init();
}
static struct fsmc_nand_timings cpu8815_nand_timings = {
/* These are mostly to get the right device names for the clock lookups */
static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE,
- "gpio.0", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO1_BASE,
- "gpio.1", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO2_BASE,
- "gpio.2", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO3_BASE,
- "gpio.3", NULL),
- OF_DEV_AUXDATA("stericsson,nmk-pinctrl-stn8815", 0,
- "pinctrl-stn8815", NULL),
- OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE,
- "uart0", NULL),
- OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE,
- "uart1", NULL),
- OF_DEV_AUXDATA("arm,primecell", NOMADIK_RNG_BASE,
- "rng", NULL),
- OF_DEV_AUXDATA("arm,primecell", NOMADIK_RTC_BASE,
- "rtc-pl031", NULL),
OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE,
- "fsmc-nand", &cpu8815_nand_data),
+ NULL, &cpu8815_nand_data),
OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE,
- "mmci", &mmcsd_plat_data),
+ NULL, &mmcsd_plat_data),
{ /* sentinel */ },
};
/* At full speed latency must be >=2, so 0x249 in low bits */
l2x0_of_init(0x00730249, 0xfe000fff);
#endif
- pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap));
of_platform_populate(NULL, of_default_bus_match_table,
cpu8815_auxdata_lookup, NULL);
}
* - Driver code is not yet migrated to use hwmod/runtime pm
* - Modules outside kernel access (to disable them by default)
*
- * - debugss
* - mmu (gfx domain)
* - cefuse
* - usbotg_fck (its additional clock and not really a modulemode)
* - ieee5000
*/
-DEFINE_CLK_GATE(debugss_ick, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
- AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
- 0x0, NULL);
DEFINE_CLK_GATE(mmu_fck, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
AM33XX_CM_GFX_MMUDATA_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
AM33XX_PWMSS2_TBCLKEN_SHIFT,
NULL, pwmss_clk_parents, ehrpwm_tbclk_ops);
+/*
+ * debugss optional clocks
+ */
+DEFINE_CLK_GATE(dbg_sysclk_ck, "sys_clkin_ck", &sys_clkin_ck,
+ 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
+ AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT, 0x0, NULL);
+
+DEFINE_CLK_GATE(dbg_clka_ck, "dpll_core_m4_ck", &dpll_core_m4_ck,
+ 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
+ AM33XX_OPTCLK_DEBUG_CLKA_SHIFT, 0x0, NULL);
+
+static const char *stm_pmd_clock_mux_ck_parents[] = {
+ "dbg_sysclk_ck", "dbg_clka_ck",
+};
+
+DEFINE_CLK_MUX(stm_pmd_clock_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0,
+ AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, AM33XX_STM_PMD_CLKSEL_SHIFT,
+ AM33XX_STM_PMD_CLKSEL_WIDTH, 0x0, NULL);
+
+DEFINE_CLK_MUX(trace_pmd_clk_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0,
+ AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
+ AM33XX_TRC_PMD_CLKSEL_SHIFT,
+ AM33XX_TRC_PMD_CLKSEL_WIDTH, 0x0, NULL);
+
+DEFINE_CLK_DIVIDER(stm_clk_div_ck, "stm_pmd_clock_mux_ck",
+ &stm_pmd_clock_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
+ AM33XX_STM_PMD_CLKDIVSEL_SHIFT,
+ AM33XX_STM_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
+ NULL);
+
+DEFINE_CLK_DIVIDER(trace_clk_div_ck, "trace_pmd_clk_mux_ck",
+ &trace_pmd_clk_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
+ AM33XX_TRC_PMD_CLKDIVSEL_SHIFT,
+ AM33XX_TRC_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
+ NULL);
+
/*
* clkdev
*/
CLK("481cc000.d_can", NULL, &dcan0_fck),
CLK(NULL, "dcan1_fck", &dcan1_fck),
CLK("481d0000.d_can", NULL, &dcan1_fck),
- CLK(NULL, "debugss_ick", &debugss_ick),
CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk),
CLK(NULL, "mcasp0_fck", &mcasp0_fck),
CLK(NULL, "mcasp1_fck", &mcasp1_fck),
CLK(NULL, "clkout2_div_ck", &clkout2_div_ck),
CLK(NULL, "timer_32k_ck", &clkdiv32k_ick),
CLK(NULL, "timer_sys_ck", &sys_clkin_ck),
+ CLK(NULL, "dbg_sysclk_ck", &dbg_sysclk_ck),
+ CLK(NULL, "dbg_clka_ck", &dbg_clka_ck),
+ CLK(NULL, "stm_pmd_clock_mux_ck", &stm_pmd_clock_mux_ck),
+ CLK(NULL, "trace_pmd_clk_mux_ck", &trace_pmd_clk_mux_ck),
+ CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck),
+ CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck),
+ CLK(NULL, "clkout2_ck", &clkout2_ck),
CLK("48300200.ehrpwm", "tbclk", &ehrpwm0_tbclk),
CLK("48302200.ehrpwm", "tbclk", &ehrpwm1_tbclk),
CLK("48304200.ehrpwm", "tbclk", &ehrpwm2_tbclk),
"l4hs_gclk",
"l4fw_gclk",
"l4ls_gclk",
+ "clkout2_ck", /* Required for external peripherals like, Audio codecs */
};
int __init am33xx_clk_init(void)
help
Say Y here if you are using an SMDK2416
+config MACH_S3C2416_DT
+ bool "Samsung S3C2416 machine using devicetree"
+ select CLKSRC_OF
+ select USE_OF
+ select PINCTRL
+ select PINCTRL_S3C24XX
+ help
+ Machine support for Samsung S3C2416 machines with device tree enabled.
+ Select this if a fdt blob is available for the S3C2416 SoC based board.
+ Note: This is under development and not all peripherals can be supported
+ with this machine file.
+
endif # CPU_S3C2416
if CPU_S3C2440
obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
+obj-$(CONFIG_MACH_S3C2416_DT) += mach-s3c2416-dt.o
obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
--- /dev/null
+/*
+ * Samsung's S3C2416 flattened device tree enabled machine
+ *
+ * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on mach-exynos/mach-exynos4-dt.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ * www.linaro.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clocksource.h>
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+/*
+ * The following lookup table is used to override device names when devices
+ * are registered from device tree. This is temporarily added to enable
+ * device tree support addition for the S3C2416 architecture.
+ *
+ * For drivers that require platform data to be provided from the machine
+ * file, a platform data pointer can also be supplied along with the
+ * devices names. Usually, the platform data elements that cannot be parsed
+ * from the device tree by the drivers (example: function pointers) are
+ * supplied. But it should be noted that this is a temporary mechanism and
+ * at some point, the drivers should be capable of parsing all the platform
+ * data from the device tree.
+ */
+static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART,
+ "s3c2440-uart.0", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000,
+ "s3c2440-uart.1", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000,
+ "s3c2440-uart.2", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000,
+ "s3c2440-uart.3", NULL),
+ OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0,
+ "s3c-sdhci.0", NULL),
+ OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1,
+ "s3c-sdhci.1", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC,
+ "s3c2440-i2c.0", NULL),
+ {},
+};
+
+static void __init s3c2416_dt_map_io(void)
+{
+ s3c24xx_init_io(NULL, 0);
+ s3c24xx_init_clocks(12000000);
+}
+
+static void __init s3c2416_dt_machine_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ s3c2416_auxdata_lookup, NULL);
+
+ s3c_pm_init();
+}
+
+static char const *s3c2416_dt_compat[] __initdata = {
+ "samsung,s3c2416",
+ "samsung,s3c2450",
+ NULL
+};
+
+DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
+ /* Maintainer: Heiko Stuebner <heiko@sntech.de> */
+ .dt_compat = s3c2416_dt_compat,
+ .map_io = s3c2416_dt_map_io,
+ .init_irq = irqchip_init,
+ .init_machine = s3c2416_dt_machine_init,
+ .init_time = clocksource_of_init,
+ .restart = s3c2416_restart,
+MACHINE_END
select SND_SOC_WM8978 if SND_SIMPLE_CARD
select USE_OF
+config MACH_ARMADILLO800EVA_REFERENCE
+ bool "Armadillo-800 EVA board - Reference Device Tree Implementation"
+ depends on ARCH_R8A7740
+ select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select SND_SOC_WM8978 if SND_SIMPLE_CARD
+ select USE_OF
+ ---help---
+ Use reference implementation of Aramdillo800 EVA board support
+ which makes a greater use of device tree at the expense
+ of not supporting a number of devices.
+
+ This is intended to aid developers
+
config MACH_BOCKW
bool "BOCK-W platform"
depends on ARCH_R8A7778
obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o
obj-$(CONFIG_MACH_LAGER) += board-lager.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
+obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
--- /dev/null
+/*
+ * armadillo 800 eva board support
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/pinctrl/machine.h>
+#include <mach/common.h>
+#include <mach/r8a7740.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-l2x0.h>
+
+/*
+ * CON1 Camera Module
+ * CON2 Extension Bus
+ * CON3 HDMI Output
+ * CON4 Composite Video Output
+ * CON5 H-UDI JTAG
+ * CON6 ARM JTAG
+ * CON7 SD1
+ * CON8 SD2
+ * CON9 RTC BackUp
+ * CON10 Monaural Mic Input
+ * CON11 Stereo Headphone Output
+ * CON12 Audio Line Output(L)
+ * CON13 Audio Line Output(R)
+ * CON14 AWL13 Module
+ * CON15 Extension
+ * CON16 LCD1
+ * CON17 LCD2
+ * CON19 Power Input
+ * CON20 USB1
+ * CON21 USB2
+ * CON22 Serial
+ * CON23 LAN
+ * CON24 USB3
+ * LED1 Camera LED(Yellow)
+ * LED2 Power LED (Green)
+ * ED3-LED6 User LED(Yellow)
+ * LED7 LAN link LED(Green)
+ * LED8 LAN activity LED(Yellow)
+ */
+
+/*
+ * DipSwitch
+ *
+ * SW1
+ *
+ * -12345678-+---------------+----------------------------
+ * 1 | boot | hermit
+ * 0 | boot | OS auto boot
+ * -12345678-+---------------+----------------------------
+ * 00 | boot device | eMMC
+ * 10 | boot device | SDHI0 (CON7)
+ * 01 | boot device | -
+ * 11 | boot device | Extension Buss (CS0)
+ * -12345678-+---------------+----------------------------
+ * 0 | Extension Bus | D8-D15 disable, eMMC enable
+ * 1 | Extension Bus | D8-D15 enable, eMMC disable
+ * -12345678-+---------------+----------------------------
+ * 0 | SDHI1 | COM8 disable, COM14 enable
+ * 1 | SDHI1 | COM8 enable, COM14 disable
+ * -12345678-+---------------+----------------------------
+ * 0 | USB0 | COM20 enable, COM24 disable
+ * 1 | USB0 | COM20 disable, COM24 enable
+ * -12345678-+---------------+----------------------------
+ * 00 | JTAG | SH-X2
+ * 10 | JTAG | ARM
+ * 01 | JTAG | -
+ * 11 | JTAG | Boundary Scan
+ *-----------+---------------+----------------------------
+ */
+
+/*
+ * FSI-WM8978
+ *
+ * this command is required when playback.
+ *
+ * # amixer set "Headphone" 50
+ *
+ * this command is required when capture.
+ *
+ * # amixer set "Input PGA" 15
+ * # amixer set "Left Input Mixer MicP" on
+ * # amixer set "Left Input Mixer MicN" on
+ * # amixer set "Right Input Mixer MicN" on
+ * # amixer set "Right Input Mixer MicP" on
+ */
+
+/*
+ * USB function
+ *
+ * When you use USB Function,
+ * set SW1.6 ON, and connect cable to CN24.
+ *
+ * USBF needs workaround on R8A7740 chip.
+ * These are a little bit complex.
+ * see
+ * usbhsf_power_ctrl()
+ */
+
+static const struct pinctrl_map eva_pinctrl_map[] = {
+ /* SCIFA1 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740",
+ "scifa1_data", "scifa1"),
+};
+
+static void __init eva_clock_init(void)
+{
+ struct clk *system = clk_get(NULL, "system_clk");
+ struct clk *xtal1 = clk_get(NULL, "extal1");
+ struct clk *usb24s = clk_get(NULL, "usb24s");
+ struct clk *fsibck = clk_get(NULL, "fsibck");
+
+ if (IS_ERR(system) ||
+ IS_ERR(xtal1) ||
+ IS_ERR(usb24s) ||
+ IS_ERR(fsibck)) {
+ pr_err("armadillo800eva board clock init failed\n");
+ goto clock_error;
+ }
+
+ /* armadillo 800 eva extal1 is 24MHz */
+ clk_set_rate(xtal1, 24000000);
+
+ /* usb24s use extal1 (= system) clock (= 24MHz) */
+ clk_set_parent(usb24s, system);
+
+ /* FSIBCK is 12.288MHz, and it is parent of FSI-B */
+ clk_set_rate(fsibck, 12288000);
+
+clock_error:
+ if (!IS_ERR(system))
+ clk_put(system);
+ if (!IS_ERR(xtal1))
+ clk_put(xtal1);
+ if (!IS_ERR(usb24s))
+ clk_put(usb24s);
+ if (!IS_ERR(fsibck))
+ clk_put(fsibck);
+}
+
+/*
+ * board init
+ */
+static void __init eva_init(void)
+{
+
+ r8a7740_clock_init(MD_CK0 | MD_CK2);
+ eva_clock_init();
+
+ pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
+ r8a7740_pinmux_init();
+
+ r8a7740_meram_workaround();
+
+ /*
+ * Touchscreen
+ * TODO: Move reset GPIO over to .dts when we can reference it
+ */
+ gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Early BRESP enable, Shared attribute override enable, 32K*8way */
+ l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
+#endif
+
+ r8a7740_add_standard_devices_dt();
+ r8a7740_pm_init();
+}
+
+#define RESCNT2 IOMEM(0xe6188020)
+static void eva_restart(char mode, const char *cmd)
+{
+ /* Do soft power on reset */
+ writel((1 << 31), RESCNT2);
+}
+
+static const char *eva_boards_compat_dt[] __initdata = {
+ "renesas,armadillo800eva-reference",
+ NULL,
+};
+
+DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
+ .map_io = r8a7740_map_io,
+ .init_early = r8a7740_init_delay,
+ .init_irq = r8a7740_init_irq_of,
+ .init_machine = eva_init,
+ .init_time = shmobile_timer_init,
+ .init_late = shmobile_init_late,
+ .dt_compat = eva_boards_compat_dt,
+ .restart = eva_restart,
+MACHINE_END
};
extern void r8a7740_meram_workaround(void);
+extern void r8a7740_init_delay(void);
extern void r8a7740_init_irq(void);
+extern void r8a7740_init_irq_of(void);
extern void r8a7740_map_io(void);
extern void r8a7740_add_early_devices(void);
extern void r8a7740_add_standard_devices(void);
+extern void r8a7740_add_standard_devices_dt(void);
extern void r8a7740_clock_init(u8 md_ck);
extern void r8a7740_pinmux_init(void);
extern void r8a7740_pm_init(void);
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
-void __init r8a7740_init_irq(void)
+static void __init r8a7740_init_irq_common(void)
{
- void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
- void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
- /* initialize the Generic Interrupt Controller PL390 r0p0 */
- gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
/* route signals to GIC */
iowrite32(0x0, pfc_inta_ctrl);
iounmap(intc_msk_base);
iounmap(pfc_inta_ctrl);
}
+
+void __init r8a7740_init_irq_of(void)
+{
+ irqchip_init();
+ r8a7740_init_irq_common();
+}
+
+void __init r8a7740_init_irq(void)
+{
+ void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
+ void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
+
+ /* initialize the Generic Interrupt Controller PL390 r0p0 */
+ gic_init(0, 29, gic_dist_base, gic_cpu_base);
+ r8a7740_init_irq_common();
+}
.num_resources = ARRAY_SIZE(ipmmu_resources),
};
-static struct platform_device *r8a7740_early_devices[] __initdata = {
- &irqpin0_device,
- &irqpin1_device,
- &irqpin2_device,
- &irqpin3_device,
+static struct platform_device *r8a7740_devices_dt[] __initdata = {
&scif0_device,
&scif1_device,
&scif2_device,
&scif7_device,
&scifb_device,
&cmt10_device,
+};
+
+static struct platform_device *r8a7740_early_devices[] __initdata = {
+ &irqpin0_device,
+ &irqpin1_device,
+ &irqpin2_device,
+ &irqpin3_device,
&tmu00_device,
&tmu01_device,
&tmu02_device,
/* add devices */
platform_add_devices(r8a7740_early_devices,
ARRAY_SIZE(r8a7740_early_devices));
+ platform_add_devices(r8a7740_devices_dt,
+ ARRAY_SIZE(r8a7740_devices_dt));
platform_add_devices(r8a7740_late_devices,
ARRAY_SIZE(r8a7740_late_devices));
{
early_platform_add_devices(r8a7740_early_devices,
ARRAY_SIZE(r8a7740_early_devices));
+ early_platform_add_devices(r8a7740_devices_dt,
+ ARRAY_SIZE(r8a7740_devices_dt));
/* setup early console here as well */
shmobile_setup_console();
#ifdef CONFIG_USE_OF
-void __init r8a7740_add_early_devices_dt(void)
-{
- shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-
- early_platform_add_devices(r8a7740_early_devices,
- ARRAY_SIZE(r8a7740_early_devices));
-
- /* setup early console here as well */
- shmobile_setup_console();
-}
-
static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = {
{ }
};
void __init r8a7740_add_standard_devices_dt(void)
{
- /* clocks are setup late during boot in the case of DT */
- r8a7740_clock_init(0);
-
- platform_add_devices(r8a7740_early_devices,
- ARRAY_SIZE(r8a7740_early_devices));
-
+ platform_add_devices(r8a7740_devices_dt,
+ ARRAY_SIZE(r8a7740_devices_dt));
of_platform_populate(NULL, of_default_bus_match_table,
r8a7740_auxdata_lookup, NULL);
}
+void __init r8a7740_init_delay(void)
+{
+ shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+};
+
+static void __init r8a7740_generic_init(void)
+{
+ r8a7740_clock_init(0);
+ r8a7740_add_standard_devices_dt();
+}
+
static const char *r8a7740_boards_compat_dt[] __initdata = {
"renesas,r8a7740",
NULL,
DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
.map_io = r8a7740_map_io,
- .init_early = r8a7740_add_early_devices_dt,
- .init_irq = r8a7740_init_irq,
- .init_machine = r8a7740_add_standard_devices_dt,
+ .init_early = r8a7740_init_delay,
+ .init_irq = r8a7740_init_irq_of,
+ .init_machine = r8a7740_generic_init,
+ .init_time = shmobile_timer_init,
.dt_compat = r8a7740_boards_compat_dt,
MACHINE_END
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
+ OF_DEV_AUXDATA("stericsson,db8500-musb", 0xa03e0000, "musb-ux500.0", NULL),
OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
&db8500_prcmu_pdata),
OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL),
+ OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
+ OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
+ OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
+ NULL),
/* Requires device name bindings. */
- OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
+ OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE,
"pinctrl-db8500", NULL),
/* Requires clock name and DMA bindings. */
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
{},
};
+static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = {
+ /* Requires DMA bindings. */
+ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL),
+ OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
+ OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
+ OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
+ &db8500_prcmu_pdata),
+ {},
+};
+
static const struct of_device_id u8500_local_bus_nodes[] = {
/* only create devices below soc node */
{ .compatible = "stericsson,db8500", },
/* TODO: Export SoC, USB, cpu-freq and DMA40 */
parent = u8500_of_init_devices();
- /* automatically probe child nodes of db8500 device */
- of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
+ /* automatically probe child nodes of dbx5x0 devices */
+ if (of_machine_is_compatible("st-ericsson,u8540"))
+ of_platform_populate(NULL, u8500_local_bus_nodes,
+ u8540_auxdata_lookup, parent);
+ else
+ of_platform_populate(NULL, u8500_local_bus_nodes,
+ u8500_auxdata_lookup, parent);
}
static const char * stericsson_dt_platform_compat[] = {
}
static const char * const zynq_dt_match[] = {
- "xlnx,zynq-zc702",
"xlnx,zynq-7000",
NULL
};
menu "Bus devices"
+config IMX_WEIM
+ bool "Freescale EIM DRIVER"
+ depends on ARCH_MXC
+ help
+ Driver for i.MX6 WEIM controller.
+ The WEIM(Wireless External Interface Module) works like a bus.
+ You can attach many different devices on it, such as NOR, onenand.
+ But now, we only support the Parallel NOR.
+
config MVEBU_MBUS
bool
depends on PLAT_ORION
# Makefile for the bus drivers.
#
+obj-$(CONFIG_IMX_WEIM) += imx-weim.o
obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
--- /dev/null
+/*
+ * EIM driver for Freescale's i.MX chips
+ *
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+
+struct imx_weim {
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static const struct of_device_id weim_id_table[] = {
+ { .compatible = "fsl,imx6q-weim", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, weim_id_table);
+
+#define CS_TIMING_LEN 6
+#define CS_REG_RANGE 0x18
+
+/* Parse and set the timing for this device. */
+static int
+weim_timing_setup(struct platform_device *pdev, struct device_node *np)
+{
+ struct imx_weim *weim = platform_get_drvdata(pdev);
+ u32 value[CS_TIMING_LEN];
+ u32 cs_idx;
+ int ret;
+ int i;
+
+ /* get the CS index from this child node's "reg" property. */
+ ret = of_property_read_u32(np, "reg", &cs_idx);
+ if (ret)
+ return ret;
+
+ /* The weim has four chip selects. */
+ if (cs_idx > 3)
+ return -EINVAL;
+
+ ret = of_property_read_u32_array(np, "fsl,weim-cs-timing",
+ value, CS_TIMING_LEN);
+ if (ret)
+ return ret;
+
+ /* set the timing for WEIM */
+ for (i = 0; i < CS_TIMING_LEN; i++)
+ writel(value[i], weim->base + cs_idx * CS_REG_RANGE + i * 4);
+ return 0;
+}
+
+static int weim_parse_dt(struct platform_device *pdev)
+{
+ struct device_node *child;
+ int ret;
+
+ for_each_child_of_node(pdev->dev.of_node, child) {
+ if (!child->name)
+ continue;
+
+ ret = weim_timing_setup(pdev, child);
+ if (ret) {
+ dev_err(&pdev->dev, "%s set timing failed.\n",
+ child->full_name);
+ return ret;
+ }
+ }
+
+ ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+ if (ret)
+ dev_err(&pdev->dev, "%s fail to create devices.\n",
+ pdev->dev.of_node->full_name);
+ return ret;
+}
+
+static int weim_probe(struct platform_device *pdev)
+{
+ struct imx_weim *weim;
+ struct resource *res;
+ int ret = -EINVAL;
+
+ weim = devm_kzalloc(&pdev->dev, sizeof(*weim), GFP_KERNEL);
+ if (!weim) {
+ ret = -ENOMEM;
+ goto weim_err;
+ }
+ platform_set_drvdata(pdev, weim);
+
+ /* get the resource */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ weim->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(weim->base)) {
+ ret = PTR_ERR(weim->base);
+ goto weim_err;
+ }
+
+ /* get the clock */
+ weim->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(weim->clk))
+ goto weim_err;
+
+ ret = clk_prepare_enable(weim->clk);
+ if (ret)
+ goto weim_err;
+
+ /* parse the device node */
+ ret = weim_parse_dt(pdev);
+ if (ret) {
+ clk_disable_unprepare(weim->clk);
+ goto weim_err;
+ }
+
+ dev_info(&pdev->dev, "WEIM driver registered.\n");
+ return 0;
+
+weim_err:
+ return ret;
+}
+
+static struct platform_driver weim_driver = {
+ .driver = {
+ .name = "imx-weim",
+ .of_match_table = weim_id_table,
+ },
+ .probe = weim_probe,
+};
+
+module_platform_driver(weim_driver);
+MODULE_AUTHOR("Freescale Semiconductor Inc.");
+MODULE_DESCRIPTION("i.MX EIM Controller Driver");
+MODULE_LICENSE("GPL");
+/*
+ * Nomadik clock implementation
+ * Copyright (C) 2013 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#define pr_fmt(fmt) "Nomadik SRC clocks: " fmt
+
+#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+#include <linux/reboot.h>
/*
* The Nomadik clock tree is described in the STN8815A12 DB V4.2
* reference manual for the chip, page 94 ff.
+ * Clock IDs are in the STn8815 Reference Manual table 3, page 27.
*/
-void __init nomadik_clk_init(void)
+#define SRC_CR 0x00U
+#define SRC_XTALCR 0x0CU
+#define SRC_XTALCR_XTALTIMEN BIT(20)
+#define SRC_XTALCR_SXTALDIS BIT(19)
+#define SRC_XTALCR_MXTALSTAT BIT(2)
+#define SRC_XTALCR_MXTALEN BIT(1)
+#define SRC_XTALCR_MXTALOVER BIT(0)
+#define SRC_PLLCR 0x10U
+#define SRC_PLLCR_PLLTIMEN BIT(29)
+#define SRC_PLLCR_PLL2EN BIT(28)
+#define SRC_PLLCR_PLL1STAT BIT(2)
+#define SRC_PLLCR_PLL1EN BIT(1)
+#define SRC_PLLCR_PLL1OVER BIT(0)
+#define SRC_PLLFR 0x14U
+#define SRC_PCKEN0 0x24U
+#define SRC_PCKDIS0 0x28U
+#define SRC_PCKENSR0 0x2CU
+#define SRC_PCKSR0 0x30U
+#define SRC_PCKEN1 0x34U
+#define SRC_PCKDIS1 0x38U
+#define SRC_PCKENSR1 0x3CU
+#define SRC_PCKSR1 0x40U
+
+/* Lock protecting the SRC_CR register */
+static DEFINE_SPINLOCK(src_lock);
+/* Base address of the SRC */
+static void __iomem *src_base;
+
+/**
+ * struct clk_pll1 - Nomadik PLL1 clock
+ * @hw: corresponding clock hardware entry
+ * @id: PLL instance: 1 or 2
+ */
+struct clk_pll {
+ struct clk_hw hw;
+ int id;
+};
+
+/**
+ * struct clk_src - Nomadik src clock
+ * @hw: corresponding clock hardware entry
+ * @id: the clock ID
+ * @group1: true if the clock is in group1, else it is in group0
+ * @clkbit: bit 0...31 corresponding to the clock in each clock register
+ */
+struct clk_src {
+ struct clk_hw hw;
+ int id;
+ bool group1;
+ u32 clkbit;
+};
+
+#define to_pll(_hw) container_of(_hw, struct clk_pll, hw)
+#define to_src(_hw) container_of(_hw, struct clk_src, hw)
+
+static int pll_clk_enable(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_pll(hw);
+ u32 val;
+
+ spin_lock(&src_lock);
+ val = readl(src_base + SRC_PLLCR);
+ if (pll->id == 1) {
+ if (val & SRC_PLLCR_PLL1OVER) {
+ val |= SRC_PLLCR_PLL1EN;
+ writel(val, src_base + SRC_PLLCR);
+ }
+ } else if (pll->id == 2) {
+ val |= SRC_PLLCR_PLL2EN;
+ writel(val, src_base + SRC_PLLCR);
+ }
+ spin_unlock(&src_lock);
+ return 0;
+}
+
+static void pll_clk_disable(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_pll(hw);
+ u32 val;
+
+ spin_lock(&src_lock);
+ val = readl(src_base + SRC_PLLCR);
+ if (pll->id == 1) {
+ if (val & SRC_PLLCR_PLL1OVER) {
+ val &= ~SRC_PLLCR_PLL1EN;
+ writel(val, src_base + SRC_PLLCR);
+ }
+ } else if (pll->id == 2) {
+ val &= ~SRC_PLLCR_PLL2EN;
+ writel(val, src_base + SRC_PLLCR);
+ }
+ spin_unlock(&src_lock);
+}
+
+static int pll_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_pll(hw);
+ u32 val;
+
+ val = readl(src_base + SRC_PLLCR);
+ if (pll->id == 1) {
+ if (val & SRC_PLLCR_PLL1OVER)
+ return !!(val & SRC_PLLCR_PLL1EN);
+ } else if (pll->id == 2) {
+ return !!(val & SRC_PLLCR_PLL2EN);
+ }
+ return 1;
+}
+
+static unsigned long pll_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pll *pll = to_pll(hw);
+ u32 val;
+
+ val = readl(src_base + SRC_PLLFR);
+
+ if (pll->id == 1) {
+ u8 mul;
+ u8 div;
+
+ mul = (val >> 8) & 0x3FU;
+ mul += 2;
+ div = val & 0x07U;
+ return (parent_rate * mul) >> div;
+ }
+
+ if (pll->id == 2) {
+ u8 mul;
+
+ mul = (val >> 24) & 0x3FU;
+ mul += 2;
+ return (parent_rate * mul);
+ }
+
+ /* Unknown PLL */
+ return 0;
+}
+
+
+static const struct clk_ops pll_clk_ops = {
+ .enable = pll_clk_enable,
+ .disable = pll_clk_disable,
+ .is_enabled = pll_clk_is_enabled,
+ .recalc_rate = pll_clk_recalc_rate,
+};
+
+static struct clk * __init
+pll_clk_register(struct device *dev, const char *name,
+ const char *parent_name, u32 id)
{
struct clk *clk;
+ struct clk_pll *pll;
+ struct clk_init_data init;
- clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
- clk_register_clkdev(clk, "apb_pclk", NULL);
- clk_register_clkdev(clk, NULL, "gpio.0");
- clk_register_clkdev(clk, NULL, "gpio.1");
- clk_register_clkdev(clk, NULL, "gpio.2");
- clk_register_clkdev(clk, NULL, "gpio.3");
- clk_register_clkdev(clk, NULL, "rng");
- clk_register_clkdev(clk, NULL, "fsmc-nand");
+ if (id != 1 && id != 2) {
+ pr_err("%s: the Nomadik has only PLL 1 & 2\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
- /*
- * The 2.4 MHz TIMCLK reference clock is active at boot time, this is
- * actually the MXTALCLK @19.2 MHz divided by 8. This clock is used
- * by the timers and watchdog. See page 105 ff.
- */
- clk = clk_register_fixed_rate(NULL, "TIMCLK", NULL, CLK_IS_ROOT,
- 2400000);
- clk_register_clkdev(clk, NULL, "mtu0");
- clk_register_clkdev(clk, NULL, "mtu1");
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll) {
+ pr_err("%s: could not allocate PLL clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &pll_clk_ops;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ pll->hw.init = &init;
+ pll->id = id;
+
+ pr_debug("register PLL1 clock \"%s\"\n", name);
+
+ clk = clk_register(dev, &pll->hw);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+/*
+ * The Nomadik SRC clocks are gated, but not in the sense that
+ * you read-modify-write a register. Instead there are separate
+ * clock enable and clock disable registers. Writing a '1' bit in
+ * the enable register for a certain clock ungates that clock without
+ * affecting the other clocks. The disable register works the opposite
+ * way.
+ */
+
+static int src_clk_enable(struct clk_hw *hw)
+{
+ struct clk_src *sclk = to_src(hw);
+ u32 enreg = sclk->group1 ? SRC_PCKEN1 : SRC_PCKEN0;
+ u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0;
+
+ writel(sclk->clkbit, src_base + enreg);
+ /* spin until enabled */
+ while (!(readl(src_base + sreg) & sclk->clkbit))
+ cpu_relax();
+ return 0;
+}
+
+static void src_clk_disable(struct clk_hw *hw)
+{
+ struct clk_src *sclk = to_src(hw);
+ u32 disreg = sclk->group1 ? SRC_PCKDIS1 : SRC_PCKDIS0;
+ u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0;
+
+ writel(sclk->clkbit, src_base + disreg);
+ /* spin until disabled */
+ while (readl(src_base + sreg) & sclk->clkbit)
+ cpu_relax();
+}
+
+static int src_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_src *sclk = to_src(hw);
+ u32 sreg = sclk->group1 ? SRC_PCKSR1 : SRC_PCKSR0;
+ u32 val = readl(src_base + sreg);
+ return !!(val & sclk->clkbit);
+}
+
+static unsigned long
+src_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return parent_rate;
+}
+
+static const struct clk_ops src_clk_ops = {
+ .enable = src_clk_enable,
+ .disable = src_clk_disable,
+ .is_enabled = src_clk_is_enabled,
+ .recalc_rate = src_clk_recalc_rate,
+};
+
+static struct clk * __init
+src_clk_register(struct device *dev, const char *name,
+ const char *parent_name, u8 id)
+{
+ struct clk *clk;
+ struct clk_src *sclk;
+ struct clk_init_data init;
+
+ sclk = kzalloc(sizeof(*sclk), GFP_KERNEL);
+ if (!sclk) {
+ pr_err("could not allocate SRC clock %s\n",
+ name);
+ return ERR_PTR(-ENOMEM);
+ }
+ init.name = name;
+ init.ops = &src_clk_ops;
+ /* Do not force-disable the static SDRAM controller */
+ if (id == 2)
+ init.flags = CLK_IGNORE_UNUSED;
+ else
+ init.flags = 0;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ sclk->hw.init = &init;
+ sclk->id = id;
+ sclk->group1 = (id > 31);
+ sclk->clkbit = BIT(id & 0x1f);
+
+ pr_debug("register clock \"%s\" ID: %d group: %d bits: %08x\n",
+ name, id, sclk->group1, sclk->clkbit);
+
+ clk = clk_register(dev, &sclk->hw);
+ if (IS_ERR(clk))
+ kfree(sclk);
+
+ return clk;
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+static u32 src_pcksr0_boot;
+static u32 src_pcksr1_boot;
+
+static const char * const src_clk_names[] = {
+ "HCLKDMA0 ",
+ "HCLKSMC ",
+ "HCLKSDRAM ",
+ "HCLKDMA1 ",
+ "HCLKCLCD ",
+ "PCLKIRDA ",
+ "PCLKSSP ",
+ "PCLKUART0 ",
+ "PCLKSDI ",
+ "PCLKI2C0 ",
+ "PCLKI2C1 ",
+ "PCLKUART1 ",
+ "PCLMSP0 ",
+ "HCLKUSB ",
+ "HCLKDIF ",
+ "HCLKSAA ",
+ "HCLKSVA ",
+ "PCLKHSI ",
+ "PCLKXTI ",
+ "PCLKUART2 ",
+ "PCLKMSP1 ",
+ "PCLKMSP2 ",
+ "PCLKOWM ",
+ "HCLKHPI ",
+ "PCLKSKE ",
+ "PCLKHSEM ",
+ "HCLK3D ",
+ "HCLKHASH ",
+ "HCLKCRYP ",
+ "PCLKMSHC ",
+ "HCLKUSBM ",
+ "HCLKRNG ",
+ "RESERVED ",
+ "RESERVED ",
+ "RESERVED ",
+ "RESERVED ",
+ "CLDCLK ",
+ "IRDACLK ",
+ "SSPICLK ",
+ "UART0CLK ",
+ "SDICLK ",
+ "I2C0CLK ",
+ "I2C1CLK ",
+ "UART1CLK ",
+ "MSPCLK0 ",
+ "USBCLK ",
+ "DIFCLK ",
+ "IPI2CCLK ",
+ "IPBMCCLK ",
+ "HSICLKRX ",
+ "HSICLKTX ",
+ "UART2CLK ",
+ "MSPCLK1 ",
+ "MSPCLK2 ",
+ "OWMCLK ",
+ "RESERVED ",
+ "SKECLK ",
+ "RESERVED ",
+ "3DCLK ",
+ "PCLKMSP3 ",
+ "MSPCLK3 ",
+ "MSHCCLK ",
+ "USBMCLK ",
+ "RNGCCLK ",
+};
+
+static int nomadik_src_clk_show(struct seq_file *s, void *what)
+{
+ int i;
+ u32 src_pcksr0 = readl(src_base + SRC_PCKSR0);
+ u32 src_pcksr1 = readl(src_base + SRC_PCKSR1);
+ u32 src_pckensr0 = readl(src_base + SRC_PCKENSR0);
+ u32 src_pckensr1 = readl(src_base + SRC_PCKENSR1);
+
+ seq_printf(s, "Clock: Boot: Now: Request: ASKED:\n");
+ for (i = 0; i < ARRAY_SIZE(src_clk_names); i++) {
+ u32 pcksrb = (i < 0x20) ? src_pcksr0_boot : src_pcksr1_boot;
+ u32 pcksr = (i < 0x20) ? src_pcksr0 : src_pcksr1;
+ u32 pckreq = (i < 0x20) ? src_pckensr0 : src_pckensr1;
+ u32 mask = BIT(i & 0x1f);
+
+ seq_printf(s, "%s %s %s %s\n",
+ src_clk_names[i],
+ (pcksrb & mask) ? "on " : "off",
+ (pcksr & mask) ? "on " : "off",
+ (pckreq & mask) ? "on " : "off");
+ }
+ return 0;
+}
+
+static int nomadik_src_clk_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, nomadik_src_clk_show, NULL);
+}
+
+static const struct file_operations nomadik_src_clk_debugfs_ops = {
+ .open = nomadik_src_clk_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init nomadik_src_clk_init_debugfs(void)
+{
+ src_pcksr0_boot = readl(src_base + SRC_PCKSR0);
+ src_pcksr1_boot = readl(src_base + SRC_PCKSR1);
+ debugfs_create_file("nomadik-src-clk", S_IFREG | S_IRUGO,
+ NULL, NULL, &nomadik_src_clk_debugfs_ops);
+ return 0;
+}
+
+module_init(nomadik_src_clk_init_debugfs);
+
+#endif
+
+static void __init of_nomadik_pll_setup(struct device_node *np)
+{
+ struct clk *clk = ERR_PTR(-EINVAL);
+ const char *clk_name = np->name;
+ const char *parent_name;
+ u32 pll_id;
+
+ if (of_property_read_u32(np, "pll-id", &pll_id)) {
+ pr_err("%s: PLL \"%s\" missing pll-id property\n",
+ __func__, clk_name);
+ return;
+ }
+ parent_name = of_clk_get_parent_name(np, 0);
+ clk = pll_clk_register(NULL, clk_name, parent_name, pll_id);
+ if (!IS_ERR(clk))
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static void __init of_nomadik_hclk_setup(struct device_node *np)
+{
+ struct clk *clk = ERR_PTR(-EINVAL);
+ const char *clk_name = np->name;
+ const char *parent_name;
+
+ parent_name = of_clk_get_parent_name(np, 0);
/*
- * At boot time, PLL2 is set to generate a set of fixed clocks,
- * one of them is CLK48, the 48 MHz clock, routed to the UART, MMC/SD
- * I2C, IrDA, USB and SSP blocks.
+ * The HCLK divides PLL1 with 1 (passthru), 2, 3 or 4.
*/
- clk = clk_register_fixed_rate(NULL, "CLK48", NULL, CLK_IS_ROOT,
- 48000000);
- clk_register_clkdev(clk, NULL, "uart0");
- clk_register_clkdev(clk, NULL, "uart1");
- clk_register_clkdev(clk, NULL, "mmci");
- clk_register_clkdev(clk, NULL, "ssp");
- clk_register_clkdev(clk, NULL, "nmk-i2c.0");
- clk_register_clkdev(clk, NULL, "nmk-i2c.1");
+ clk = clk_register_divider(NULL, clk_name, parent_name,
+ 0, src_base + SRC_CR,
+ 13, 2,
+ CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+ &src_lock);
+ if (!IS_ERR(clk))
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static void __init of_nomadik_src_clk_setup(struct device_node *np)
+{
+ struct clk *clk = ERR_PTR(-EINVAL);
+ const char *clk_name = np->name;
+ const char *parent_name;
+ u32 clk_id;
+
+ if (of_property_read_u32(np, "clock-id", &clk_id)) {
+ pr_err("%s: SRC clock \"%s\" missing clock-id property\n",
+ __func__, clk_name);
+ return;
+ }
+ parent_name = of_clk_get_parent_name(np, 0);
+ clk = src_clk_register(NULL, clk_name, parent_name, clk_id);
+ if (!IS_ERR(clk))
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static const __initconst struct of_device_id nomadik_src_match[] = {
+ { .compatible = "stericsson,nomadik-src" },
+ { /* sentinel */ }
+};
+
+static const __initconst struct of_device_id nomadik_src_clk_match[] = {
+ {
+ .compatible = "fixed-clock",
+ .data = of_fixed_clk_setup,
+ },
+ {
+ .compatible = "fixed-factor-clock",
+ .data = of_fixed_factor_clk_setup,
+ },
+ {
+ .compatible = "st,nomadik-pll-clock",
+ .data = of_nomadik_pll_setup,
+ },
+ {
+ .compatible = "st,nomadik-hclk-clock",
+ .data = of_nomadik_hclk_setup,
+ },
+ {
+ .compatible = "st,nomadik-src-clock",
+ .data = of_nomadik_src_clk_setup,
+ },
+ { /* sentinel */ }
+};
+
+static int nomadik_clk_reboot_handler(struct notifier_block *this,
+ unsigned long code,
+ void *unused)
+{
+ u32 val;
+
+ /* The main chrystal need to be enabled for reboot to work */
+ val = readl(src_base + SRC_XTALCR);
+ val &= ~SRC_XTALCR_MXTALOVER;
+ val |= SRC_XTALCR_MXTALEN;
+ pr_crit("force-enabling MXTALO\n");
+ writel(val, src_base + SRC_XTALCR);
+ return NOTIFY_OK;
+}
+
+static struct notifier_block nomadik_clk_reboot_notifier = {
+ .notifier_call = nomadik_clk_reboot_handler,
+};
+
+void __init nomadik_clk_init(void)
+{
+ struct device_node *np;
+ u32 val;
+
+ np = of_find_matching_node(NULL, nomadik_src_match);
+ if (!np) {
+ pr_crit("no matching node for SRC, aborting clock init\n");
+ return;
+ }
+ src_base = of_iomap(np, 0);
+ if (!src_base) {
+ pr_err("%s: must have src parent node with REGS (%s)\n",
+ __func__, np->name);
+ return;
+ }
+ val = readl(src_base + SRC_XTALCR);
+ pr_info("SXTALO is %s\n",
+ (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
+ pr_info("MXTAL is %s\n",
+ (val & SRC_XTALCR_MXTALSTAT) ? "enabled" : "disabled");
+ if (of_property_read_bool(np, "disable-sxtalo")) {
+ /* The machine uses an external oscillator circuit */
+ val |= SRC_XTALCR_SXTALDIS;
+ pr_info("disabling SXTALO\n");
+ }
+ if (of_property_read_bool(np, "disable-mxtalo")) {
+ /* Disable this too: also run by external oscillator */
+ val |= SRC_XTALCR_MXTALOVER;
+ val &= ~SRC_XTALCR_MXTALEN;
+ pr_info("disabling MXTALO\n");
+ }
+ writel(val, src_base + SRC_XTALCR);
+ register_reboot_notifier(&nomadik_clk_reboot_notifier);
+
+ of_clk_init(nomadik_src_clk_match);
}
sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2,
sclk_slimbus, sclk_fimd1, sclk_mipi1, sclk_pcm1, sclk_pcm2, sclk_i2s1,
sclk_i2s2, sclk_mipihsi, sclk_mfc, sclk_pcm0, sclk_g3d, sclk_pwm_isp,
- sclk_spi0_isp, sclk_spi1_isp, sclk_uart_isp,
+ sclk_spi0_isp, sclk_spi1_isp, sclk_uart_isp, sclk_fimg2d,
/* gate clocks */
fimc0 = 256, fimc1, fimc2, fimc3, csis0, csis1, jpeg, smmu_fimc0,
MUX(none, "mout_spi0_isp", group1_p4x12, E4X12_SRC_ISP, 4, 4),
MUX(none, "mout_spi1_isp", group1_p4x12, E4X12_SRC_ISP, 8, 4),
MUX(none, "mout_uart_isp", group1_p4x12, E4X12_SRC_ISP, 12, 4),
+ MUX(none, "mout_g2d0", sclk_ampll_p4210, SRC_DMC, 20, 1),
+ MUX(none, "mout_g2d1", sclk_evpll_p, SRC_DMC, 24, 1),
+ MUX(none, "mout_g2d", mout_g2d_p, SRC_DMC, 28, 1),
};
/* list of divider clocks supported in all exynos4 soc's */
/* list of divider clocks supported in exynos4210 soc */
struct samsung_div_clock exynos4210_div_clks[] __initdata = {
DIV(aclk200, "aclk200", "mout_aclk200", DIV_TOP, 0, 3),
- DIV(none, "div_g2d", "mout_g2d", DIV_IMAGE, 0, 4),
+ DIV(sclk_fimg2d, "sclk_fimg2d", "mout_g2d", DIV_IMAGE, 0, 4),
DIV(none, "div_fimd1", "mout_fimd1", E4210_DIV_LCD1, 0, 4),
DIV(none, "div_mipi1", "mout_mipi1", E4210_DIV_LCD1, 16, 4),
DIV(none, "div_sata", "mout_sata", DIV_FSYS0, 20, 4),
DIV(none, "div_mpwm", "div_isp1", E4X12_DIV_ISP1, 0, 3),
DIV(div_mcuisp0, "div_mcuisp0", "aclk400_mcuisp", E4X12_DIV_ISP1, 4, 3),
DIV(div_mcuisp1, "div_mcuisp1", "div_mcuisp0", E4X12_DIV_ISP1, 8, 3),
+ DIV(sclk_fimg2d, "sclk_fimg2d", "mout_g2d", DIV_DMC1, 0, 4),
};
/* list of gate clocks supported in all exynos4 soc's */
CLK_IGNORE_UNUSED, 0),
GATE(spi1_isp, "spi1_isp", "aclk200", E4X12_GATE_ISP1, 13,
CLK_IGNORE_UNUSED, 0),
+ GATE(g2d, "g2d", "aclk200", GATE_IP_DMC, 23, 0, 0),
};
/*
#include <linux/io.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/delay.h>
.dev_id = &nmdk_clkevt,
};
-void __init nmdk_timer_init(void __iomem *base, int irq)
+static void __init __nmdk_timer_init(void __iomem *base, int irq,
+ struct clk *pclk, struct clk *clk)
{
unsigned long rate;
- struct clk *clk0, *pclk0;
mtu_base = base;
- pclk0 = clk_get_sys("mtu0", "apb_pclk");
- BUG_ON(IS_ERR(pclk0));
- BUG_ON(clk_prepare(pclk0) < 0);
- BUG_ON(clk_enable(pclk0) < 0);
-
- clk0 = clk_get_sys("mtu0", NULL);
- BUG_ON(IS_ERR(clk0));
- BUG_ON(clk_prepare(clk0) < 0);
- BUG_ON(clk_enable(clk0) < 0);
+ BUG_ON(clk_prepare_enable(pclk));
+ BUG_ON(clk_prepare_enable(clk));
/*
* Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
* to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
* with 16 gives too low timer resolution.
*/
- rate = clk_get_rate(clk0);
+ rate = clk_get_rate(clk);
if (rate > 32000000) {
rate /= 16;
clk_prescale = MTU_CRn_PRESCALE_16;
mtu_delay_timer.freq = rate;
register_current_timer_delay(&mtu_delay_timer);
}
+
+void __init nmdk_timer_init(void __iomem *base, int irq)
+{
+ struct clk *clk0, *pclk0;
+
+ pclk0 = clk_get_sys("mtu0", "apb_pclk");
+ BUG_ON(IS_ERR(pclk0));
+ clk0 = clk_get_sys("mtu0", NULL);
+ BUG_ON(IS_ERR(clk0));
+
+ __nmdk_timer_init(base, irq, pclk0, clk0);
+}
+
+static void __init nmdk_timer_of_init(struct device_node *node)
+{
+ struct clk *pclk;
+ struct clk *clk;
+ void __iomem *base;
+ int irq;
+
+ base = of_iomap(node, 0);
+ if (!base)
+ panic("Can't remap registers");
+
+ pclk = of_clk_get_by_name(node, "apb_pclk");
+ if (IS_ERR(pclk))
+ panic("could not get apb_pclk");
+
+ clk = of_clk_get_by_name(node, "timclk");
+ if (IS_ERR(clk))
+ panic("could not get timclk");
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0)
+ panic("Can't parse IRQ");
+
+ __nmdk_timer_init(base, irq, pclk, clk);
+}
+CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu",
+ nmdk_timer_of_init);
static SIMPLE_DEV_PM_OPS(ux500_cryp_pm, ux500_cryp_suspend, ux500_cryp_resume);
+static const struct of_device_id ux500_cryp_match[] = {
+ { .compatible = "stericsson,ux500-cryp" },
+ { },
+};
+
static struct platform_driver cryp_driver = {
.probe = ux500_cryp_probe,
.remove = ux500_cryp_remove,
.driver = {
.owner = THIS_MODULE,
.name = "cryp1",
+ .of_match_table = ux500_cryp_match,
.pm = &ux500_cryp_pm,
}
};
static SIMPLE_DEV_PM_OPS(ux500_hash_pm, ux500_hash_suspend, ux500_hash_resume);
+static const struct of_device_id ux500_hash_match[] = {
+ { .compatible = "stericsson,ux500-hash" },
+ { },
+};
+
static struct platform_driver hash_driver = {
.probe = ux500_hash_probe,
.remove = ux500_hash_remove,
.driver = {
.owner = THIS_MODULE,
.name = "hash1",
+ .of_match_table = ux500_hash_match,
.pm = &ux500_hash_pm,
}
};
*/
#include <linux/init.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
}
/* deal with driver instance configuration */
- if (pdata)
+ if (pdata) {
memcpy(&p->config, pdata, sizeof(*pdata));
+ } else {
+ of_property_read_u32(pdev->dev.of_node, "sense-bitfield-width",
+ &p->config.sense_bitfield_width);
+ p->config.control_parent = of_property_read_bool(pdev->dev.of_node,
+ "control-parent");
+ }
if (!p->config.sense_bitfield_width)
p->config.sense_bitfield_width = 4; /* default to 4 bits */
static const struct of_device_id nmk_pinctrl_match[] = {
{
- .compatible = "stericsson,nmk-pinctrl-stn8815",
+ .compatible = "stericsson,stn8815-pinctrl",
.data = (void *)PINCTRL_NMK_STN8815,
},
{
- .compatible = "stericsson,nmk-pinctrl",
+ .compatible = "stericsson,db8500-pinctrl",
.data = (void *)PINCTRL_NMK_DB8500,
},
{
- .compatible = "stericsson,nmk-pinctrl-db8540",
+ .compatible = "stericsson,db8540-pinctrl",
.data = (void *)PINCTRL_NMK_DB8540,
},
{},
{ .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, },
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, },
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
- { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
+ { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
{ .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8500_LDO_DMIC, },
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, },
};
{ .name = "ab8500_ldo_adc", .driver_data = (void *) AB8505_LDO_ADC, },
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB8505_LDO_AUDIO, },
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8505_LDO_ANAMIC1, },
- { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8505_LDO_ANAMIC2, },
+ { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8505_LDO_ANAMIC2, },
{ .name = "ab8500_ldo_aux8", .driver_data = (void *) AB8505_LDO_AUX8, },
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB8505_LDO_ANA, },
};
{ .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8540_LDO_TVOUT, },
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB8540_LDO_AUDIO, },
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8540_LDO_ANAMIC1, },
- { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8540_LDO_ANAMIC2, },
+ { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8540_LDO_ANAMIC2, },
{ .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8540_LDO_DMIC, },
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB8540_LDO_ANA, },
{ .name = "ab8500_ldo_sdio", .driver_data = (void *) AB8540_LDO_SDIO, },
{ .name = "ab8500_ldo_tvout", .driver_data = (void *) AB9540_LDO_TVOUT, },
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB9540_LDO_AUDIO, },
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB9540_LDO_ANAMIC1, },
- { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB9540_LDO_ANAMIC2, },
+ { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB9540_LDO_ANAMIC2, },
{ .name = "ab8500_ldo_dmic", .driver_data = (void *) AB9540_LDO_DMIC, },
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB9540_LDO_ANA, },
};
--- /dev/null
+/*
+ * This header provides constants for binding nvidia,tegra114-car.
+ *
+ * The first 160 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+ * registers. These IDs often match those in the CAR's RST_DEVICES registers,
+ * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+ * this case, those clocks are assigned IDs above 160 in order to highlight
+ * this issue. Implementations that interpret these clock IDs as bit values
+ * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+ * explicitly handle these special cases.
+ *
+ * The balance of the clocks controlled by the CAR are assigned IDs of 160 and
+ * above.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_TEGRA114_CAR_H
+#define _DT_BINDINGS_CLOCK_TEGRA114_CAR_H
+
+/* 0 */
+/* 1 */
+/* 2 */
+/* 3 */
+#define TEGRA114_CLK_RTC 4
+#define TEGRA114_CLK_TIMER 5
+#define TEGRA114_CLK_UARTA 6
+/* 7 (register bit affects uartb and vfir) */
+/* 8 */
+#define TEGRA114_CLK_SDMMC2 9
+/* 10 (register bit affects spdif_in and spdif_out) */
+#define TEGRA114_CLK_I2S1 11
+#define TEGRA114_CLK_I2C1 12
+#define TEGRA114_CLK_NDFLASH 13
+#define TEGRA114_CLK_SDMMC1 14
+#define TEGRA114_CLK_SDMMC4 15
+/* 16 */
+#define TEGRA114_CLK_PWM 17
+#define TEGRA114_CLK_I2S2 18
+#define TEGRA114_CLK_EPP 19
+/* 20 (register bit affects vi and vi_sensor) */
+#define TEGRA114_CLK_GR_2D 21
+#define TEGRA114_CLK_USBD 22
+#define TEGRA114_CLK_ISP 23
+#define TEGRA114_CLK_GR_3D 24
+/* 25 */
+#define TEGRA114_CLK_DISP2 26
+#define TEGRA114_CLK_DISP1 27
+#define TEGRA114_CLK_HOST1X 28
+#define TEGRA114_CLK_VCP 29
+#define TEGRA114_CLK_I2S0 30
+/* 31 */
+
+/* 32 */
+/* 33 */
+#define TEGRA114_CLK_APBDMA 34
+/* 35 */
+#define TEGRA114_CLK_KBC 36
+/* 37 */
+/* 38 */
+/* 39 (register bit affects fuse and fuse_burn) */
+#define TEGRA114_CLK_KFUSE 40
+#define TEGRA114_CLK_SBC1 41
+#define TEGRA114_CLK_NOR 42
+/* 43 */
+#define TEGRA114_CLK_SBC2 44
+/* 45 */
+#define TEGRA114_CLK_SBC3 46
+#define TEGRA114_CLK_I2C5 47
+#define TEGRA114_CLK_DSIA 48
+/* 49 */
+#define TEGRA114_CLK_MIPI 50
+#define TEGRA114_CLK_HDMI 51
+#define TEGRA114_CLK_CSI 52
+/* 53 */
+#define TEGRA114_CLK_I2C2 54
+#define TEGRA114_CLK_UARTC 55
+#define TEGRA114_CLK_MIPI_CAL 56
+#define TEGRA114_CLK_EMC 57
+#define TEGRA114_CLK_USB2 58
+#define TEGRA114_CLK_USB3 59
+/* 60 */
+#define TEGRA114_CLK_VDE 61
+#define TEGRA114_CLK_BSEA 62
+#define TEGRA114_CLK_BSEV 63
+
+/* 64 */
+#define TEGRA114_CLK_UARTD 65
+/* 66 */
+#define TEGRA114_CLK_I2C3 67
+#define TEGRA114_CLK_SBC4 68
+#define TEGRA114_CLK_SDMMC3 69
+/* 70 */
+#define TEGRA114_CLK_OWR 71
+/* 72 */
+#define TEGRA114_CLK_CSITE 73
+/* 74 */
+/* 75 */
+#define TEGRA114_CLK_LA 76
+#define TEGRA114_CLK_TRACE 77
+#define TEGRA114_CLK_SOC_THERM 78
+#define TEGRA114_CLK_DTV 79
+#define TEGRA114_CLK_NDSPEED 80
+#define TEGRA114_CLK_I2CSLOW 81
+#define TEGRA114_CLK_DSIB 82
+#define TEGRA114_CLK_TSEC 83
+/* 84 */
+/* 85 */
+/* 86 */
+/* 87 */
+/* 88 */
+#define TEGRA114_CLK_XUSB_HOST 89
+/* 90 */
+#define TEGRA114_CLK_MSENC 91
+#define TEGRA114_CLK_CSUS 92
+/* 93 */
+/* 94 */
+/* 95 (bit affects xusb_dev and xusb_dev_src) */
+
+/* 96 */
+/* 97 */
+/* 98 */
+#define TEGRA114_CLK_MSELECT 99
+#define TEGRA114_CLK_TSENSOR 100
+#define TEGRA114_CLK_I2S3 101
+#define TEGRA114_CLK_I2S4 102
+#define TEGRA114_CLK_I2C4 103
+#define TEGRA114_CLK_SBC5 104
+#define TEGRA114_CLK_SBC6 105
+#define TEGRA114_CLK_D_AUDIO 106
+#define TEGRA114_CLK_APBIF 107
+#define TEGRA114_CLK_DAM0 108
+#define TEGRA114_CLK_DAM1 109
+#define TEGRA114_CLK_DAM2 110
+#define TEGRA114_CLK_HDA2CODEC_2X 111
+/* 112 */
+#define TEGRA114_CLK_AUDIO0_2X 113
+#define TEGRA114_CLK_AUDIO1_2X 114
+#define TEGRA114_CLK_AUDIO2_2X 115
+#define TEGRA114_CLK_AUDIO3_2X 116
+#define TEGRA114_CLK_AUDIO4_2X 117
+#define TEGRA114_CLK_SPDIF_2X 118
+#define TEGRA114_CLK_ACTMON 119
+#define TEGRA114_CLK_EXTERN1 120
+#define TEGRA114_CLK_EXTERN2 121
+#define TEGRA114_CLK_EXTERN3 122
+/* 123 */
+/* 124 */
+#define TEGRA114_CLK_HDA 125
+/* 126 */
+#define TEGRA114_CLK_SE 127
+
+#define TEGRA114_CLK_HDA2HDMI 128
+/* 129 */
+/* 130 */
+/* 131 */
+/* 132 */
+/* 133 */
+/* 134 */
+/* 135 */
+/* 136 */
+/* 137 */
+/* 138 */
+/* 139 */
+/* 140 */
+/* 141 */
+/* 142 */
+/* 143 (bit affects xusb_falcon_src, xusb_fs_src, */
+/* xusb_host_src and xusb_ss_src) */
+#define TEGRA114_CLK_CILAB 144
+#define TEGRA114_CLK_CILCD 145
+#define TEGRA114_CLK_CILE 146
+#define TEGRA114_CLK_DSIALP 147
+#define TEGRA114_CLK_DSIBLP 148
+/* 149 */
+#define TEGRA114_CLK_DDS 150
+/* 151 */
+#define TEGRA114_CLK_DP2 152
+#define TEGRA114_CLK_AMX 153
+#define TEGRA114_CLK_ADX 154
+/* 155 (bit affects dfll_ref and dfll_soc) */
+#define TEGRA114_CLK_XUSB_SS 156
+/* 157 */
+/* 158 */
+/* 159 */
+
+/* 160 */
+/* 161 */
+/* 162 */
+/* 163 */
+/* 164 */
+/* 165 */
+/* 166 */
+/* 167 */
+/* 168 */
+/* 169 */
+/* 170 */
+/* 171 */
+/* 172 */
+/* 173 */
+/* 174 */
+/* 175 */
+/* 176 */
+/* 177 */
+/* 178 */
+/* 179 */
+/* 180 */
+/* 181 */
+/* 182 */
+/* 183 */
+/* 184 */
+/* 185 */
+/* 186 */
+/* 187 */
+/* 188 */
+/* 189 */
+/* 190 */
+/* 191 */
+
+#define TEGRA114_CLK_UARTB 192
+#define TEGRA114_CLK_VFIR 193
+#define TEGRA114_CLK_SPDIF_IN 194
+#define TEGRA114_CLK_SPDIF_OUT 195
+#define TEGRA114_CLK_VI 196
+#define TEGRA114_CLK_VI_SENSOR 197
+#define TEGRA114_CLK_FUSE 198
+#define TEGRA114_CLK_FUSE_BURN 199
+#define TEGRA114_CLK_CLK_32K 200
+#define TEGRA114_CLK_CLK_M 201
+#define TEGRA114_CLK_CLK_M_DIV2 202
+#define TEGRA114_CLK_CLK_M_DIV4 203
+#define TEGRA114_CLK_PLL_REF 204
+#define TEGRA114_CLK_PLL_C 205
+#define TEGRA114_CLK_PLL_C_OUT1 206
+#define TEGRA114_CLK_PLL_C2 207
+#define TEGRA114_CLK_PLL_C3 208
+#define TEGRA114_CLK_PLL_M 209
+#define TEGRA114_CLK_PLL_M_OUT1 210
+#define TEGRA114_CLK_PLL_P 211
+#define TEGRA114_CLK_PLL_P_OUT1 212
+#define TEGRA114_CLK_PLL_P_OUT2 213
+#define TEGRA114_CLK_PLL_P_OUT3 214
+#define TEGRA114_CLK_PLL_P_OUT4 215
+#define TEGRA114_CLK_PLL_A 216
+#define TEGRA114_CLK_PLL_A_OUT0 217
+#define TEGRA114_CLK_PLL_D 218
+#define TEGRA114_CLK_PLL_D_OUT0 219
+#define TEGRA114_CLK_PLL_D2 220
+#define TEGRA114_CLK_PLL_D2_OUT0 221
+#define TEGRA114_CLK_PLL_U 222
+#define TEGRA114_CLK_PLL_U_480M 223
+
+#define TEGRA114_CLK_PLL_U_60M 224
+#define TEGRA114_CLK_PLL_U_48M 225
+#define TEGRA114_CLK_PLL_U_12M 226
+#define TEGRA114_CLK_PLL_X 227
+#define TEGRA114_CLK_PLL_X_OUT0 228
+#define TEGRA114_CLK_PLL_RE_VCO 229
+#define TEGRA114_CLK_PLL_RE_OUT 230
+#define TEGRA114_CLK_PLL_E_OUT0 231
+#define TEGRA114_CLK_SPDIF_IN_SYNC 232
+#define TEGRA114_CLK_I2S0_SYNC 233
+#define TEGRA114_CLK_I2S1_SYNC 234
+#define TEGRA114_CLK_I2S2_SYNC 235
+#define TEGRA114_CLK_I2S3_SYNC 236
+#define TEGRA114_CLK_I2S4_SYNC 237
+#define TEGRA114_CLK_VIMCLK_SYNC 238
+#define TEGRA114_CLK_AUDIO0 239
+#define TEGRA114_CLK_AUDIO1 240
+#define TEGRA114_CLK_AUDIO2 241
+#define TEGRA114_CLK_AUDIO3 242
+#define TEGRA114_CLK_AUDIO4 243
+#define TEGRA114_CLK_SPDIF 244
+#define TEGRA114_CLK_CLK_OUT_1 245
+#define TEGRA114_CLK_CLK_OUT_2 246
+#define TEGRA114_CLK_CLK_OUT_3 247
+#define TEGRA114_CLK_BLINK 248
+/* 249 */
+/* 250 */
+/* 251 */
+#define TEGRA114_CLK_XUSB_HOST_SRC 252
+#define TEGRA114_CLK_XUSB_FALCON_SRC 253
+#define TEGRA114_CLK_XUSB_FS_SRC 254
+#define TEGRA114_CLK_XUSB_SS_SRC 255
+
+#define TEGRA114_CLK_XUSB_DEV_SRC 256
+#define TEGRA114_CLK_XUSB_DEV 257
+#define TEGRA114_CLK_XUSB_HS_SRC 258
+#define TEGRA114_CLK_SCLK 259
+#define TEGRA114_CLK_HCLK 260
+#define TEGRA114_CLK_PCLK 261
+#define TEGRA114_CLK_CCLK_G 262
+#define TEGRA114_CLK_CCLK_LP 263
+/* 264 */
+/* 265 */
+/* 266 */
+/* 267 */
+/* 268 */
+/* 269 */
+/* 270 */
+/* 271 */
+/* 272 */
+/* 273 */
+/* 274 */
+/* 275 */
+/* 276 */
+/* 277 */
+/* 278 */
+/* 279 */
+/* 280 */
+/* 281 */
+/* 282 */
+/* 283 */
+/* 284 */
+/* 285 */
+/* 286 */
+/* 287 */
+
+/* 288 */
+/* 289 */
+/* 290 */
+/* 291 */
+/* 292 */
+/* 293 */
+/* 294 */
+/* 295 */
+/* 296 */
+/* 297 */
+/* 298 */
+/* 299 */
+#define TEGRA114_CLK_AUDIO0_MUX 300
+#define TEGRA114_CLK_AUDIO1_MUX 301
+#define TEGRA114_CLK_AUDIO2_MUX 302
+#define TEGRA114_CLK_AUDIO3_MUX 303
+#define TEGRA114_CLK_AUDIO4_MUX 304
+#define TEGRA114_CLK_SPDIF_MUX 305
+#define TEGRA114_CLK_CLK_OUT_1_MUX 306
+#define TEGRA114_CLK_CLK_OUT_2_MUX 307
+#define TEGRA114_CLK_CLK_OUT_3_MUX 308
+#define TEGRA114_CLK_DSIA_MUX 309
+#define TEGRA114_CLK_DSIB_MUX 310
+#define TEGRA114_CLK_CLK_MAX 311
+
+#endif /* _DT_BINDINGS_CLOCK_TEGRA114_CAR_H */
--- /dev/null
+/*
+ * This header provides constants for binding nvidia,tegra20-car.
+ *
+ * The first 96 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+ * registers. These IDs often match those in the CAR's RST_DEVICES registers,
+ * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+ * this case, those clocks are assigned IDs above 95 in order to highlight
+ * this issue. Implementations that interpret these clock IDs as bit values
+ * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+ * explicitly handle these special cases.
+ *
+ * The balance of the clocks controlled by the CAR are assigned IDs of 96 and
+ * above.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_TEGRA20_CAR_H
+#define _DT_BINDINGS_CLOCK_TEGRA20_CAR_H
+
+#define TEGRA20_CLK_CPU 0
+/* 1 */
+/* 2 */
+#define TEGRA20_CLK_AC97 3
+#define TEGRA20_CLK_RTC 4
+#define TEGRA20_CLK_TIMER 5
+#define TEGRA20_CLK_UARTA 6
+/* 7 (register bit affects uart2 and vfir) */
+#define TEGRA20_CLK_GPIO 8
+#define TEGRA20_CLK_SDMMC2 9
+/* 10 (register bit affects spdif_in and spdif_out) */
+#define TEGRA20_CLK_I2S1 11
+#define TEGRA20_CLK_I2C1 12
+#define TEGRA20_CLK_NDFLASH 13
+#define TEGRA20_CLK_SDMMC1 14
+#define TEGRA20_CLK_SDMMC4 15
+#define TEGRA20_CLK_TWC 16
+#define TEGRA20_CLK_PWM 17
+#define TEGRA20_CLK_I2S2 18
+#define TEGRA20_CLK_EPP 19
+/* 20 (register bit affects vi and vi_sensor) */
+#define TEGRA20_CLK_GR2D 21
+#define TEGRA20_CLK_USBD 22
+#define TEGRA20_CLK_ISP 23
+#define TEGRA20_CLK_GR3D 24
+#define TEGRA20_CLK_IDE 25
+#define TEGRA20_CLK_DISP2 26
+#define TEGRA20_CLK_DISP1 27
+#define TEGRA20_CLK_HOST1X 28
+#define TEGRA20_CLK_VCP 29
+/* 30 */
+#define TEGRA20_CLK_CACHE2 31
+
+#define TEGRA20_CLK_MEM 32
+#define TEGRA20_CLK_AHBDMA 33
+#define TEGRA20_CLK_APBDMA 34
+/* 35 */
+#define TEGRA20_CLK_KBC 36
+#define TEGRA20_CLK_STAT_MON 37
+#define TEGRA20_CLK_PMC 38
+#define TEGRA20_CLK_FUSE 39
+#define TEGRA20_CLK_KFUSE 40
+#define TEGRA20_CLK_SBC1 41
+#define TEGRA20_CLK_NOR 42
+#define TEGRA20_CLK_SPI 43
+#define TEGRA20_CLK_SBC2 44
+#define TEGRA20_CLK_XIO 45
+#define TEGRA20_CLK_SBC3 46
+#define TEGRA20_CLK_DVC 47
+#define TEGRA20_CLK_DSI 48
+/* 49 (register bit affects tvo and cve) */
+#define TEGRA20_CLK_MIPI 50
+#define TEGRA20_CLK_HDMI 51
+#define TEGRA20_CLK_CSI 52
+#define TEGRA20_CLK_TVDAC 53
+#define TEGRA20_CLK_I2C2 54
+#define TEGRA20_CLK_UARTC 55
+/* 56 */
+#define TEGRA20_CLK_EMC 57
+#define TEGRA20_CLK_USB2 58
+#define TEGRA20_CLK_USB3 59
+#define TEGRA20_CLK_MPE 60
+#define TEGRA20_CLK_VDE 61
+#define TEGRA20_CLK_BSEA 62
+#define TEGRA20_CLK_BSEV 63
+
+#define TEGRA20_CLK_SPEEDO 64
+#define TEGRA20_CLK_UARTD 65
+#define TEGRA20_CLK_UARTE 66
+#define TEGRA20_CLK_I2C3 67
+#define TEGRA20_CLK_SBC4 68
+#define TEGRA20_CLK_SDMMC3 69
+#define TEGRA20_CLK_PEX 70
+#define TEGRA20_CLK_OWR 71
+#define TEGRA20_CLK_AFI 72
+#define TEGRA20_CLK_CSITE 73
+#define TEGRA20_CLK_PCIE_XCLK 74
+#define TEGRA20_CLK_AVPUCQ 75
+#define TEGRA20_CLK_LA 76
+/* 77 */
+/* 78 */
+/* 79 */
+/* 80 */
+/* 81 */
+/* 82 */
+/* 83 */
+#define TEGRA20_CLK_IRAMA 84
+#define TEGRA20_CLK_IRAMB 85
+#define TEGRA20_CLK_IRAMC 86
+#define TEGRA20_CLK_IRAMD 87
+#define TEGRA20_CLK_CRAM2 88
+#define TEGRA20_CLK_AUDIO_2X 89 /* a/k/a audio_2x_sync_clk */
+#define TEGRA20_CLK_CLK_D 90
+/* 91 */
+#define TEGRA20_CLK_CSUS 92
+#define TEGRA20_CLK_CDEV2 93
+#define TEGRA20_CLK_CDEV1 94
+/* 95 */
+
+#define TEGRA20_CLK_UARTB 96
+#define TEGRA20_CLK_VFIR 97
+#define TEGRA20_CLK_SPDIF_IN 98
+#define TEGRA20_CLK_SPDIF_OUT 99
+#define TEGRA20_CLK_VI 100
+#define TEGRA20_CLK_VI_SENSOR 101
+#define TEGRA20_CLK_TVO 102
+#define TEGRA20_CLK_CVE 103
+#define TEGRA20_CLK_OSC 104
+#define TEGRA20_CLK_CLK_32K 105 /* a/k/a clk_s */
+#define TEGRA20_CLK_CLK_M 106
+#define TEGRA20_CLK_SCLK 107
+#define TEGRA20_CLK_CCLK 108
+#define TEGRA20_CLK_HCLK 109
+#define TEGRA20_CLK_PCLK 110
+#define TEGRA20_CLK_BLINK 111
+#define TEGRA20_CLK_PLL_A 112
+#define TEGRA20_CLK_PLL_A_OUT0 113
+#define TEGRA20_CLK_PLL_C 114
+#define TEGRA20_CLK_PLL_C_OUT1 115
+#define TEGRA20_CLK_PLL_D 116
+#define TEGRA20_CLK_PLL_D_OUT0 117
+#define TEGRA20_CLK_PLL_E 118
+#define TEGRA20_CLK_PLL_M 119
+#define TEGRA20_CLK_PLL_M_OUT1 120
+#define TEGRA20_CLK_PLL_P 121
+#define TEGRA20_CLK_PLL_P_OUT1 122
+#define TEGRA20_CLK_PLL_P_OUT2 123
+#define TEGRA20_CLK_PLL_P_OUT3 124
+#define TEGRA20_CLK_PLL_P_OUT4 125
+#define TEGRA20_CLK_PLL_S 126
+#define TEGRA20_CLK_PLL_U 127
+
+#define TEGRA20_CLK_PLL_X 128
+#define TEGRA20_CLK_COP 129 /* a/k/a avp */
+#define TEGRA20_CLK_AUDIO 130 /* a/k/a audio_sync_clk */
+#define TEGRA20_CLK_PLL_REF 131
+#define TEGRA20_CLK_TWD 132
+#define TEGRA20_CLK_CLK_MAX 133
+
+#endif /* _DT_BINDINGS_CLOCK_TEGRA20_CAR_H */
--- /dev/null
+/*
+ * This header provides constants for binding nvidia,tegra30-car.
+ *
+ * The first 130 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+ * registers. These IDs often match those in the CAR's RST_DEVICES registers,
+ * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+ * this case, those clocks are assigned IDs above 160 in order to highlight
+ * this issue. Implementations that interpret these clock IDs as bit values
+ * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+ * explicitly handle these special cases.
+ *
+ * The balance of the clocks controlled by the CAR are assigned IDs of 160 and
+ * above.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_TEGRA30_CAR_H
+#define _DT_BINDINGS_CLOCK_TEGRA30_CAR_H
+
+#define TEGRA30_CLK_CPU 0
+/* 1 */
+/* 2 */
+/* 3 */
+#define TEGRA30_CLK_RTC 4
+#define TEGRA30_CLK_TIMER 5
+#define TEGRA30_CLK_UARTA 6
+/* 7 (register bit affects uartb and vfir) */
+#define TEGRA30_CLK_GPIO 8
+#define TEGRA30_CLK_SDMMC2 9
+/* 10 (register bit affects spdif_in and spdif_out) */
+#define TEGRA30_CLK_I2S1 11
+#define TEGRA30_CLK_I2C1 12
+#define TEGRA30_CLK_NDFLASH 13
+#define TEGRA30_CLK_SDMMC1 14
+#define TEGRA30_CLK_SDMMC4 15
+/* 16 */
+#define TEGRA30_CLK_PWM 17
+#define TEGRA30_CLK_I2S2 18
+#define TEGRA30_CLK_EPP 19
+/* 20 (register bit affects vi and vi_sensor) */
+#define TEGRA30_CLK_GR2D 21
+#define TEGRA30_CLK_USBD 22
+#define TEGRA30_CLK_ISP 23
+#define TEGRA30_CLK_GR3D 24
+/* 25 */
+#define TEGRA30_CLK_DISP2 26
+#define TEGRA30_CLK_DISP1 27
+#define TEGRA30_CLK_HOST1X 28
+#define TEGRA30_CLK_VCP 29
+#define TEGRA30_CLK_I2S0 30
+#define TEGRA30_CLK_COP_CACHE 31
+
+#define TEGRA30_CLK_MC 32
+#define TEGRA30_CLK_AHBDMA 33
+#define TEGRA30_CLK_APBDMA 34
+/* 35 */
+#define TEGRA30_CLK_KBC 36
+#define TEGRA30_CLK_STATMON 37
+#define TEGRA30_CLK_PMC 38
+/* 39 (register bit affects fuse and fuse_burn) */
+#define TEGRA30_CLK_KFUSE 40
+#define TEGRA30_CLK_SBC1 41
+#define TEGRA30_CLK_NOR 42
+/* 43 */
+#define TEGRA30_CLK_SBC2 44
+/* 45 */
+#define TEGRA30_CLK_SBC3 46
+#define TEGRA30_CLK_I2C5 47
+#define TEGRA30_CLK_DSIA 48
+/* 49 (register bit affects cve and tvo) */
+#define TEGRA30_CLK_MIPI 50
+#define TEGRA30_CLK_HDMI 51
+#define TEGRA30_CLK_CSI 52
+#define TEGRA30_CLK_TVDAC 53
+#define TEGRA30_CLK_I2C2 54
+#define TEGRA30_CLK_UARTC 55
+/* 56 */
+#define TEGRA30_CLK_EMC 57
+#define TEGRA30_CLK_USB2 58
+#define TEGRA30_CLK_USB3 59
+#define TEGRA30_CLK_MPE 60
+#define TEGRA30_CLK_VDE 61
+#define TEGRA30_CLK_BSEA 62
+#define TEGRA30_CLK_BSEV 63
+
+#define TEGRA30_CLK_SPEEDO 64
+#define TEGRA30_CLK_UARTD 65
+#define TEGRA30_CLK_UARTE 66
+#define TEGRA30_CLK_I2C3 67
+#define TEGRA30_CLK_SBC4 68
+#define TEGRA30_CLK_SDMMC3 69
+#define TEGRA30_CLK_PCIE 70
+#define TEGRA30_CLK_OWR 71
+#define TEGRA30_CLK_AFI 72
+#define TEGRA30_CLK_CSITE 73
+#define TEGRA30_CLK_PCIEX 74
+#define TEGRA30_CLK_AVPUCQ 75
+#define TEGRA30_CLK_LA 76
+/* 77 */
+/* 78 */
+#define TEGRA30_CLK_DTV 79
+#define TEGRA30_CLK_NDSPEED 80
+#define TEGRA30_CLK_I2CSLOW 81
+#define TEGRA30_CLK_DSIB 82
+/* 83 */
+#define TEGRA30_CLK_IRAMA 84
+#define TEGRA30_CLK_IRAMB 85
+#define TEGRA30_CLK_IRAMC 86
+#define TEGRA30_CLK_IRAMD 87
+#define TEGRA30_CLK_CRAM2 88
+/* 89 */
+#define TEGRA30_CLK_AUDIO_2X 90 /* a/k/a audio_2x_sync_clk */
+/* 91 */
+#define TEGRA30_CLK_CSUS 92
+#define TEGRA30_CLK_CDEV2 93
+#define TEGRA30_CLK_CDEV1 94
+/* 95 */
+
+#define TEGRA30_CLK_CPU_G 96
+#define TEGRA30_CLK_CPU_LP 97
+#define TEGRA30_CLK_GR3D2 98
+#define TEGRA30_CLK_MSELECT 99
+#define TEGRA30_CLK_TSENSOR 100
+#define TEGRA30_CLK_I2S3 101
+#define TEGRA30_CLK_I2S4 102
+#define TEGRA30_CLK_I2C4 103
+#define TEGRA30_CLK_SBC5 104
+#define TEGRA30_CLK_SBC6 105
+#define TEGRA30_CLK_D_AUDIO 106
+#define TEGRA30_CLK_APBIF 107
+#define TEGRA30_CLK_DAM0 108
+#define TEGRA30_CLK_DAM1 109
+#define TEGRA30_CLK_DAM2 110
+#define TEGRA30_CLK_HDA2CODEC_2X 111
+#define TEGRA30_CLK_ATOMICS 112
+#define TEGRA30_CLK_AUDIO0_2X 113
+#define TEGRA30_CLK_AUDIO1_2X 114
+#define TEGRA30_CLK_AUDIO2_2X 115
+#define TEGRA30_CLK_AUDIO3_2X 116
+#define TEGRA30_CLK_AUDIO4_2X 117
+#define TEGRA30_CLK_SPDIF_2X 118
+#define TEGRA30_CLK_ACTMON 119
+#define TEGRA30_CLK_EXTERN1 120
+#define TEGRA30_CLK_EXTERN2 121
+#define TEGRA30_CLK_EXTERN3 122
+#define TEGRA30_CLK_SATA_OOB 123
+#define TEGRA30_CLK_SATA 124
+#define TEGRA30_CLK_HDA 125
+/* 126 */
+#define TEGRA30_CLK_SE 127
+
+#define TEGRA30_CLK_HDA2HDMI 128
+#define TEGRA30_CLK_SATA_COLD 129
+/* 130 */
+/* 131 */
+/* 132 */
+/* 133 */
+/* 134 */
+/* 135 */
+/* 136 */
+/* 137 */
+/* 138 */
+/* 139 */
+/* 140 */
+/* 141 */
+/* 142 */
+/* 143 */
+/* 144 */
+/* 145 */
+/* 146 */
+/* 147 */
+/* 148 */
+/* 149 */
+/* 150 */
+/* 151 */
+/* 152 */
+/* 153 */
+/* 154 */
+/* 155 */
+/* 156 */
+/* 157 */
+/* 158 */
+/* 159 */
+
+#define TEGRA30_CLK_UARTB 160
+#define TEGRA30_CLK_VFIR 161
+#define TEGRA30_CLK_SPDIF_IN 162
+#define TEGRA30_CLK_SPDIF_OUT 163
+#define TEGRA30_CLK_VI 164
+#define TEGRA30_CLK_VI_SENSOR 165
+#define TEGRA30_CLK_FUSE 166
+#define TEGRA30_CLK_FUSE_BURN 167
+#define TEGRA30_CLK_CVE 168
+#define TEGRA30_CLK_TVO 169
+#define TEGRA30_CLK_CLK_32K 170
+#define TEGRA30_CLK_CLK_M 171
+#define TEGRA30_CLK_CLK_M_DIV2 172
+#define TEGRA30_CLK_CLK_M_DIV4 173
+#define TEGRA30_CLK_PLL_REF 174
+#define TEGRA30_CLK_PLL_C 175
+#define TEGRA30_CLK_PLL_C_OUT1 176
+#define TEGRA30_CLK_PLL_M 177
+#define TEGRA30_CLK_PLL_M_OUT1 178
+#define TEGRA30_CLK_PLL_P 179
+#define TEGRA30_CLK_PLL_P_OUT1 180
+#define TEGRA30_CLK_PLL_P_OUT2 181
+#define TEGRA30_CLK_PLL_P_OUT3 182
+#define TEGRA30_CLK_PLL_P_OUT4 183
+#define TEGRA30_CLK_PLL_A 184
+#define TEGRA30_CLK_PLL_A_OUT0 185
+#define TEGRA30_CLK_PLL_D 186
+#define TEGRA30_CLK_PLL_D_OUT0 187
+#define TEGRA30_CLK_PLL_D2 188
+#define TEGRA30_CLK_PLL_D2_OUT0 189
+#define TEGRA30_CLK_PLL_U 190
+#define TEGRA30_CLK_PLL_X 191
+
+#define TEGRA30_CLK_PLL_X_OUT0 192
+#define TEGRA30_CLK_PLL_E 193
+#define TEGRA30_CLK_SPDIF_IN_SYNC 194
+#define TEGRA30_CLK_I2S0_SYNC 195
+#define TEGRA30_CLK_I2S1_SYNC 196
+#define TEGRA30_CLK_I2S2_SYNC 197
+#define TEGRA30_CLK_I2S3_SYNC 198
+#define TEGRA30_CLK_I2S4_SYNC 199
+#define TEGRA30_CLK_VIMCLK_SYNC 200
+#define TEGRA30_CLK_AUDIO0 201
+#define TEGRA30_CLK_AUDIO1 202
+#define TEGRA30_CLK_AUDIO2 203
+#define TEGRA30_CLK_AUDIO3 204
+#define TEGRA30_CLK_AUDIO4 205
+#define TEGRA30_CLK_SPDIF 206
+#define TEGRA30_CLK_CLK_OUT_1 207 /* (extern1) */
+#define TEGRA30_CLK_CLK_OUT_2 208 /* (extern2) */
+#define TEGRA30_CLK_CLK_OUT_3 209 /* (extern3) */
+#define TEGRA30_CLK_SCLK 210
+#define TEGRA30_CLK_BLINK 211
+#define TEGRA30_CLK_CCLK_G 212
+#define TEGRA30_CLK_CCLK_LP 213
+#define TEGRA30_CLK_TWD 214
+#define TEGRA30_CLK_CML0 215
+#define TEGRA30_CLK_CML1 216
+#define TEGRA30_CLK_HCLK 217
+#define TEGRA30_CLK_PCLK 218
+/* 219 */
+/* 220 */
+/* 221 */
+/* 222 */
+/* 223 */
+
+/* 288 */
+/* 289 */
+/* 290 */
+/* 291 */
+/* 292 */
+/* 293 */
+/* 294 */
+/* 295 */
+/* 296 */
+/* 297 */
+/* 298 */
+/* 299 */
+#define TEGRA30_CLK_CLK_OUT_1_MUX 300
+#define TEGRA30_CLK_CLK_MAX 301
+
+#endif /* _DT_BINDINGS_CLOCK_TEGRA30_CAR_H */
--- /dev/null
+/*
+ * This header provides macros for at91 dma bindings.
+ *
+ * Copyright (C) 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * GPLv2 only
+ */
+
+#ifndef __DT_BINDINGS_AT91_DMA_H__
+#define __DT_BINDINGS_AT91_DMA_H__
+
+/*
+ * Source and/or destination peripheral ID
+ */
+#define AT91_DMA_CFG_PER_ID_MASK (0xff)
+#define AT91_DMA_CFG_PER_ID(id) (id & AT91_DMA_CFG_PER_ID_MASK)
+
+/*
+ * FIFO configuration: it defines when a request is serviced.
+ */
+#define AT91_DMA_CFG_FIFOCFG_OFFSET (8)
+#define AT91_DMA_CFG_FIFOCFG_MASK (0xf << AT91_DMA_CFG_FIFOCFG_OFFSET)
+#define AT91_DMA_CFG_FIFOCFG_HALF (0x0 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* half FIFO (default behavior) */
+#define AT91_DMA_CFG_FIFOCFG_ALAP (0x1 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* largest defined AHB burst */
+#define AT91_DMA_CFG_FIFOCFG_ASAP (0x2 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* single AHB access */
+
+#endif /* __DT_BINDINGS_AT91_DMA_H__ */
--- /dev/null
+/*
+ * This header provides constants for binding nvidia,tegra*-gpio.
+ *
+ * The first cell in Tegra's GPIO specifier is the GPIO ID. The macros below
+ * provide names for this.
+ *
+ * The second cell contains standard flag values specified in gpio.h.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_TEGRA_GPIO_H
+#define _DT_BINDINGS_GPIO_TEGRA_GPIO_H
+
+#include <dt-bindings/gpio/gpio.h>
+
+#define TEGRA_GPIO_BANK_ID_A 0
+#define TEGRA_GPIO_BANK_ID_B 1
+#define TEGRA_GPIO_BANK_ID_C 2
+#define TEGRA_GPIO_BANK_ID_D 3
+#define TEGRA_GPIO_BANK_ID_E 4
+#define TEGRA_GPIO_BANK_ID_F 5
+#define TEGRA_GPIO_BANK_ID_G 6
+#define TEGRA_GPIO_BANK_ID_H 7
+#define TEGRA_GPIO_BANK_ID_I 8
+#define TEGRA_GPIO_BANK_ID_J 9
+#define TEGRA_GPIO_BANK_ID_K 10
+#define TEGRA_GPIO_BANK_ID_L 11
+#define TEGRA_GPIO_BANK_ID_M 12
+#define TEGRA_GPIO_BANK_ID_N 13
+#define TEGRA_GPIO_BANK_ID_O 14
+#define TEGRA_GPIO_BANK_ID_P 15
+#define TEGRA_GPIO_BANK_ID_Q 16
+#define TEGRA_GPIO_BANK_ID_R 17
+#define TEGRA_GPIO_BANK_ID_S 18
+#define TEGRA_GPIO_BANK_ID_T 19
+#define TEGRA_GPIO_BANK_ID_U 20
+#define TEGRA_GPIO_BANK_ID_V 21
+#define TEGRA_GPIO_BANK_ID_W 22
+#define TEGRA_GPIO_BANK_ID_X 23
+#define TEGRA_GPIO_BANK_ID_Y 24
+#define TEGRA_GPIO_BANK_ID_Z 25
+#define TEGRA_GPIO_BANK_ID_AA 26
+#define TEGRA_GPIO_BANK_ID_BB 27
+#define TEGRA_GPIO_BANK_ID_CC 28
+#define TEGRA_GPIO_BANK_ID_DD 29
+#define TEGRA_GPIO_BANK_ID_EE 30
+
+#define TEGRA_GPIO(bank, offset) \
+ ((TEGRA_GPIO_BANK_ID_##bank * 8) + offset)
+
+#endif
--- /dev/null
+/*
+ * This header provides constants specific to AM33XX pinctrl bindings.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_AM33XX_H
+#define _DT_BINDINGS_PINCTRL_AM33XX_H
+
+#include <include/dt-bindings/pinctrl/omap.h>
+
+/* am33xx specific mux bit defines */
+#undef PULL_ENA
+#undef INPUT_EN
+
+#define PULL_DISABLE (1 << 3)
+#define INPUT_EN (1 << 5)
+#define SLEWCTRL_FAST (1 << 6)
+
+/* update macro depending on INPUT_EN and PULL_ENA */
+#undef PIN_OUTPUT
+#undef PIN_OUTPUT_PULLUP
+#undef PIN_OUTPUT_PULLDOWN
+#undef PIN_INPUT
+#undef PIN_INPUT_PULLUP
+#undef PIN_INPUT_PULLDOWN
+
+#define PIN_OUTPUT (PULL_DISABLE)
+#define PIN_OUTPUT_PULLUP (PULL_UP)
+#define PIN_OUTPUT_PULLDOWN 0
+#define PIN_INPUT (INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN (INPUT_EN)
+
+/* undef non-existing modes */
+#undef PIN_OFF_NONE
+#undef PIN_OFF_OUTPUT_HIGH
+#undef PIN_OFF_OUTPUT_LOW
+#undef PIN_OFF_INPUT_PULLUP
+#undef PIN_OFF_INPUT_PULLDOWN
+#undef PIN_OFF_WAKEUPENABLE
+
+#endif
+
--- /dev/null
+/*
+ * This header provides constants for OMAP pinctrl bindings.
+ *
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009-2010 Texas Instruments
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_OMAP_H
+#define _DT_BINDINGS_PINCTRL_OMAP_H
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define MUX_MODE0 0
+#define MUX_MODE1 1
+#define MUX_MODE2 2
+#define MUX_MODE3 3
+#define MUX_MODE4 4
+#define MUX_MODE5 5
+#define MUX_MODE6 6
+#define MUX_MODE7 7
+
+/* 24xx/34xx mux bit defines */
+#define PULL_ENA (1 << 3)
+#define PULL_UP (1 << 4)
+#define ALTELECTRICALSEL (1 << 5)
+
+/* 34xx specific mux bit defines */
+#define INPUT_EN (1 << 8)
+#define OFF_EN (1 << 9)
+#define OFFOUT_EN (1 << 10)
+#define OFFOUT_VAL (1 << 11)
+#define OFF_PULL_EN (1 << 12)
+#define OFF_PULL_UP (1 << 13)
+#define WAKEUP_EN (1 << 14)
+
+/* 44xx specific mux bit defines */
+#define WAKEUP_EVENT (1 << 15)
+
+/* Active pin states */
+#define PIN_OUTPUT 0
+#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP)
+#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA)
+#define PIN_INPUT INPUT_EN
+#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN)
+
+/* Off mode states */
+#define PIN_OFF_NONE 0
+#define PIN_OFF_OUTPUT_HIGH (OFF_EN | OFFOUT_EN | OFFOUT_VAL)
+#define PIN_OFF_OUTPUT_LOW (OFF_EN | OFFOUT_EN)
+#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFF_PULL_EN | OFF_PULL_UP)
+#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN)
+#define PIN_OFF_WAKEUPENABLE WAKEUP_EN
+
+#endif
+
projects / karo-tx-linux.git / commitdiff