]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
omap: rx51: Platform support for lp5523 led chip
authorAmeya Palande <ameya.palande@nokia.com>
Tue, 5 Jul 2011 10:38:22 +0000 (03:38 -0700)
committerTony Lindgren <tony@atomide.com>
Tue, 5 Jul 2011 10:38:22 +0000 (03:38 -0700)
Platform support for lp5523 led chip

Signed-off-by: Ameya Palande <ameya.palande@nokia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/mach-omap2/board-rx51-peripherals.c

index 5e559dda3cc32efeb1ad3c8ecc2abec0b539a2b1..c1938dffb94690e02d364469eb82b0e78d6d806b 100644 (file)
@@ -39,6 +39,7 @@
 #include <sound/tpa6130a2-plat.h>
 #include <media/radio-si4713.h>
 #include <media/si4713.h>
+#include <linux/leds-lp5523.h>
 
 #include <../drivers/staging/iio/light/tsl2563.h>
 
@@ -53,6 +54,7 @@
 #define RX51_WL1251_IRQ_GPIO           42
 #define RX51_FMTX_RESET_GPIO           163
 #define RX51_FMTX_IRQ                  53
+#define RX51_LP5523_CHIP_EN_GPIO       41
 
 #define RX51_USB_TRANSCEIVER_RST_GPIO  67
 
@@ -71,6 +73,64 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
 };
 #endif
 
+#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
+static struct lp5523_led_config rx51_lp5523_led_config[] = {
+       {
+               .chan_nr        = 0,
+               .led_current    = 50,
+       }, {
+               .chan_nr        = 1,
+               .led_current    = 50,
+       }, {
+               .chan_nr        = 2,
+               .led_current    = 50,
+       }, {
+               .chan_nr        = 3,
+               .led_current    = 50,
+       }, {
+               .chan_nr        = 4,
+               .led_current    = 50,
+       }, {
+               .chan_nr        = 5,
+               .led_current    = 50,
+       }, {
+               .chan_nr        = 6,
+               .led_current    = 50,
+       }, {
+               .chan_nr        = 7,
+               .led_current    = 50,
+       }, {
+               .chan_nr        = 8,
+               .led_current    = 50,
+       }
+};
+
+static int rx51_lp5523_setup(void)
+{
+       return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT,
+                       "lp5523_enable");
+}
+
+static void rx51_lp5523_release(void)
+{
+       gpio_free(RX51_LP5523_CHIP_EN_GPIO);
+}
+
+static void rx51_lp5523_enable(bool state)
+{
+       gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state);
+}
+
+static struct lp5523_platform_data rx51_lp5523_platform_data = {
+       .led_config             = rx51_lp5523_led_config,
+       .num_channels           = ARRAY_SIZE(rx51_lp5523_led_config),
+       .clock_mode             = LP5523_CLOCK_AUTO,
+       .setup_resources        = rx51_lp5523_setup,
+       .release_resources      = rx51_lp5523_release,
+       .enable                 = rx51_lp5523_enable,
+};
+#endif
+
 static struct omap2_mcspi_device_config wl1251_mcspi_config = {
        .turbo_mode     = 0,
        .single_channel = 1,
@@ -832,6 +892,12 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
                I2C_BOARD_INFO("tsl2563", 0x29),
                .platform_data = &rx51_tsl2563_platform_data,
        },
+#endif
+#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
+       {
+               I2C_BOARD_INFO("lp5523", 0x32),
+               .platform_data  = &rx51_lp5523_platform_data,
+       },
 #endif
        {
                I2C_BOARD_INFO("tpa6130a2", 0x60),