]> git.karo-electronics.de Git - linux-beck.git/commitdiff
mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS
authorJeff Lance <j-lance1@ti.com>
Thu, 4 Sep 2014 17:01:57 +0000 (19:01 +0200)
committerLee Jones <lee.jones@linaro.org>
Fri, 26 Sep 2014 07:24:03 +0000 (08:24 +0100)
The logic in AFE_Pen_Ctrl bitmask in the CTRL register is different for five
wire versus four or eight wire touschscreens. This patch should fix this for
five-wire touch screens. There should be no change needed here for four and
eight wire tousch screens.

Signed-off-by: Jeff Lance <j-lance1@ti.com>
[bigeasy: keep the change mfd only]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
drivers/mfd/ti_am335x_tscadc.c
include/linux/mfd/ti_am335x_tscadc.h

index 121add8be4569a4ce3713c96b9083bb2c086f13c..d877e777cce667261112503c8b0050df1eda6d96 100644 (file)
@@ -242,18 +242,20 @@ static    int ti_tscadc_probe(struct platform_device *pdev)
        tscadc_writel(tscadc, REG_CLKDIV, tscadc->clk_div);
 
        /* Set the control register bits */
-       ctrl = CNTRLREG_STEPCONFIGWRT |
-                       CNTRLREG_STEPID;
-       if (tsc_wires > 0)
-               ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
+       ctrl = CNTRLREG_STEPCONFIGWRT | CNTRLREG_STEPID;
        tscadc_writel(tscadc, REG_CTRL, ctrl);
 
        /* Set register bits for Idle Config Mode */
-       if (tsc_wires > 0)
+       if (tsc_wires > 0) {
+               tscadc->tsc_wires = tsc_wires;
+               if (tsc_wires == 5)
+                       ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
+               else
+                       ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
                tscadc_idle_config(tscadc);
+       }
 
        /* Enable the TSC module enable bit */
-       ctrl = tscadc_readl(tscadc, REG_CTRL);
        ctrl |= CNTRLREG_TSCSSENB;
        tscadc_writel(tscadc, REG_CTRL, ctrl);
 
@@ -325,21 +327,23 @@ static int tscadc_suspend(struct device *dev)
 static int tscadc_resume(struct device *dev)
 {
        struct ti_tscadc_dev    *tscadc_dev = dev_get_drvdata(dev);
-       unsigned int restore, ctrl;
+       u32 ctrl;
 
        pm_runtime_get_sync(dev);
 
        /* context restore */
        ctrl = CNTRLREG_STEPCONFIGWRT | CNTRLREG_STEPID;
-       if (tscadc_dev->tsc_cell != -1)
-               ctrl |= CNTRLREG_TSCENB | CNTRLREG_4WIRE;
        tscadc_writel(tscadc_dev, REG_CTRL, ctrl);
 
-       if (tscadc_dev->tsc_cell != -1)
+       if (tscadc_dev->tsc_cell != -1) {
+               if (tscadc_dev->tsc_wires == 5)
+                       ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB;
+               else
+                       ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB;
                tscadc_idle_config(tscadc_dev);
-       restore = tscadc_readl(tscadc_dev, REG_CTRL);
-       tscadc_writel(tscadc_dev, REG_CTRL,
-                       (restore | CNTRLREG_TSCSSENB));
+       }
+       ctrl |= CNTRLREG_TSCSSENB;
+       tscadc_writel(tscadc_dev, REG_CTRL, ctrl);
 
        tscadc_writel(tscadc_dev, REG_CLKDIV, tscadc_dev->clk_div);
 
index fb96c84dada50c0f425681e71fff1ca5702aa342..e2e70053470e62afafaa1d7cc0a6dc2cbf826de9 100644 (file)
@@ -155,6 +155,7 @@ struct ti_tscadc_dev {
        void __iomem *tscadc_base;
        int irq;
        int used_cells; /* 1-2 */
+       int tsc_wires;
        int tsc_cell;   /* -1 if not used */
        int adc_cell;   /* -1 if not used */
        struct mfd_cell cells[TSCADC_CELLS];