[SCSI] qla2xxx: Updates to ISP82xx support.

1) Allow transition to NEED RESET state only from READY state for ISP82xx.
2) Avoid infinite ISP aborts when chip reset fails.
3) Code cleanup to remove some of the unused debug code.

Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 4559f5c6c1ae2fbee80eafe77354608da9443d1d..83961090901873de4ec95709143cdc0e090b6c49 100644 (file)
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2764,8 +2764,6 @@ struct qla_hw_data {
        unsigned long   nx_pcibase;             /* Base I/O address */
        uint8_t         *nxdb_rd_ptr;           /* Doorbell read pointer */
        unsigned long   nxdb_wr_ptr;            /* Door bell write pointer */
-       unsigned long   first_page_group_start;
-       unsigned long   first_page_group_end;
 
        uint32_t        crb_win;
        uint32_t        curr_window;

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 7fd1344ff1f9b705410016a42f07fbfa080686fb..ab2cc71994c2d45a7c4e3e432a6deffea7c53c07 100644 (file)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -5296,39 +5296,6 @@ qla82xx_restart_isp(scsi_qla_host_t *vha)
                                    "(%d).\n", rval);
                        }
                }
-       } else {        /* failed the ISP abort */
-               vha->flags.online = 1;
-               if (test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-                       if (ha->isp_abort_cnt == 0) {
-                               qla_printk(KERN_WARNING, ha,
-                                   "ISP error recovery failed - "
-                                   "board disabled\n");
-                               /*
-                                * The next call disables the board
-                                * completely.
-                                */
-                               ha->isp_ops->reset_adapter(vha);
-                               vha->flags.online = 0;
-                               clear_bit(ISP_ABORT_RETRY,
-                                       &vha->dpc_flags);
-                               status = 0;
-                       } else { /* schedule another ISP abort */
-                               ha->isp_abort_cnt--;
-                               qla_printk(KERN_INFO, ha,
-                                       "qla%ld: ISP abort - "
-                                       "retry remaining %d\n",
-                                       vha->host_no, ha->isp_abort_cnt);
-                               status = 1;
-                       }
-               } else {
-                       ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT;
-                       qla_printk(KERN_INFO, ha,
-                               "(%ld): ISP error recovery "
-                               "- retrying (%d) more times\n",
-                               vha->host_no, ha->isp_abort_cnt);
-                       set_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
-                       status = 1;
-               }
        }
 
        if (!status) {

diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 495ff1ade36e7deef7b6c88322f1d463fcb8858a..ff562de0e8e7e9bc82fb146e3b75d055efc6b6d5 100644 (file)
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -30,16 +30,6 @@
 #define QLA82XX_PCI_CAMQM_2M_BASE      (0x000ff800UL)
 #define CRB_INDIRECT_2M        (0x1e0000UL)
 
-static inline void *qla82xx_pci_base_offsetfset(struct qla_hw_data *ha,
-    unsigned long off)
-{
-       if ((off < ha->first_page_group_end) &&
-           (off >= ha->first_page_group_start))
-               return (void *)(ha->nx_pcibase + off);
-
-       return NULL;
-}
-
 #define MAX_CRB_XFORM 60
 static unsigned long crb_addr_xform[MAX_CRB_XFORM];
 int qla82xx_crb_table_initialized;
@@ -335,6 +325,18 @@ unsigned qla82xx_crb_hub_agt[64] = {
        0,
 };
 
+/* Device states */
+char *qdev_state[] = {
+        "Unknown",
+       "Cold",
+       "Initializing",
+       "Ready",
+       "Need Reset",
+       "Need Quiescent",
+       "Failed",
+       "Quiescent",
+};
+
 /*
  * In: 'off' is offset from CRB space in 128M pci map
  * Out: 'off' is 2M pci map addr
@@ -661,7 +663,7 @@ static int qla82xx_pci_mem_read_direct(struct qla_hw_data *ha,
        u64 off, void *data, int size)
 {
        unsigned long   flags;
-       void           *addr;
+       void           *addr = NULL;
        int             ret = 0;
        u64             start;
        uint8_t         *mem_ptr = NULL;
@@ -684,26 +686,23 @@ static int qla82xx_pci_mem_read_direct(struct qla_hw_data *ha,
                return -1;
        }
 
-       addr = qla82xx_pci_base_offsetfset(ha, start);
-       if (!addr) {
-               write_unlock_irqrestore(&ha->hw_lock, flags);
-               mem_base = pci_resource_start(ha->pdev, 0);
-               mem_page = start & PAGE_MASK;
-               /* Map two pages whenever user tries to access addresses in two
-               * consecutive pages.
-               */
-               if (mem_page != ((start + size - 1) & PAGE_MASK))
-                       mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE * 2);
-               else
-                       mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE);
-               if (mem_ptr == 0UL) {
-                       *(u8  *)data = 0;
-                       return -1;
-               }
-               addr = mem_ptr;
-               addr += start & (PAGE_SIZE - 1);
-               write_lock_irqsave(&ha->hw_lock, flags);
+       write_unlock_irqrestore(&ha->hw_lock, flags);
+       mem_base = pci_resource_start(ha->pdev, 0);
+       mem_page = start & PAGE_MASK;
+       /* Map two pages whenever user tries to access addresses in two
+       * consecutive pages.
+       */
+       if (mem_page != ((start + size - 1) & PAGE_MASK))
+               mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE * 2);
+       else
+               mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE);
+       if (mem_ptr == 0UL) {
+               *(u8  *)data = 0;
+               return -1;
        }
+       addr = mem_ptr;
+       addr += start & (PAGE_SIZE - 1);
+       write_lock_irqsave(&ha->hw_lock, flags);
 
        switch (size) {
        case 1:
@@ -734,7 +733,7 @@ qla82xx_pci_mem_write_direct(struct qla_hw_data *ha,
        u64 off, void *data, int size)
 {
        unsigned long   flags;
-       void           *addr;
+       void           *addr = NULL;
        int             ret = 0;
        u64             start;
        uint8_t         *mem_ptr = NULL;
@@ -757,25 +756,22 @@ qla82xx_pci_mem_write_direct(struct qla_hw_data *ha,
                return -1;
        }
 
-       addr = qla82xx_pci_base_offsetfset(ha, start);
-       if (!addr) {
-               write_unlock_irqrestore(&ha->hw_lock, flags);
-               mem_base = pci_resource_start(ha->pdev, 0);
-               mem_page = start & PAGE_MASK;
-               /* Map two pages whenever user tries to access addresses in two
-                * consecutive pages.
-                */
-               if (mem_page != ((start + size - 1) & PAGE_MASK))
-                       mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE*2);
-               else
-                       mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE);
-               if (mem_ptr == 0UL)
-                       return -1;
+       write_unlock_irqrestore(&ha->hw_lock, flags);
+       mem_base = pci_resource_start(ha->pdev, 0);
+       mem_page = start & PAGE_MASK;
+       /* Map two pages whenever user tries to access addresses in two
+        * consecutive pages.
+        */
+       if (mem_page != ((start + size - 1) & PAGE_MASK))
+               mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE*2);
+       else
+               mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE);
+       if (mem_ptr == 0UL)
+               return -1;
 
-               addr = mem_ptr;
-               addr += start & (PAGE_SIZE - 1);
-               write_lock_irqsave(&ha->hw_lock, flags);
-       }
+       addr = mem_ptr;
+       addr += start & (PAGE_SIZE - 1);
+       write_lock_irqsave(&ha->hw_lock, flags);
 
        switch (size) {
        case 1:
@@ -1866,6 +1862,14 @@ void qla82xx_config_rings(struct scsi_qla_host *vha)
        WRT_REG_DWORD((unsigned long  __iomem *)&reg->rsp_q_out[0], 0);
 }
 
+void qla82xx_reset_adapter(struct scsi_qla_host *vha)
+{
+       struct qla_hw_data *ha = vha->hw;
+       vha->flags.online = 0;
+       qla2x00_try_to_stop_firmware(vha);
+       ha->isp_ops->disable_intrs(ha);
+}
+
 int qla82xx_fw_load_from_blob(struct qla_hw_data *ha)
 {
        u64 *ptr64;
@@ -2093,15 +2097,7 @@ qla82xx_intr_handler(int irq, void *dev_id)
 
                if (RD_REG_DWORD(&reg->host_int)) {
                        stat = RD_REG_DWORD(&reg->host_status);
-                       if (stat & HSRX_RISC_PAUSED) {
-                               if (pci_channel_offline(ha->pdev))
-                                       break;
-
-                               qla_printk(KERN_INFO, ha, "RISC paused\n");
-                               set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
-                               qla2xxx_wake_dpc(vha);
-                               break;
-                       } else if ((stat & HSRX_RISC_INT) == 0)
+                       if ((stat & HSRX_RISC_INT) == 0)
                                break;
 
                        switch (stat & 0xff) {
@@ -2177,15 +2173,7 @@ qla82xx_msix_default(int irq, void *dev_id)
        do {
                if (RD_REG_DWORD(&reg->host_int)) {
                        stat = RD_REG_DWORD(&reg->host_status);
-                       if (stat & HSRX_RISC_PAUSED) {
-                               if (pci_channel_offline(ha->pdev))
-                                       break;
-
-                               qla_printk(KERN_INFO, ha, "RISC paused\n");
-                               set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
-                               qla2xxx_wake_dpc(vha);
-                               break;
-                       } else if ((stat & HSRX_RISC_INT) == 0)
+                       if ((stat & HSRX_RISC_INT) == 0)
                                break;
 
                        switch (stat & 0xff) {
@@ -3348,6 +3336,9 @@ qla82xx_need_reset_handler(scsi_qla_host_t *vha)
        }
 
        dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+       qla_printk(KERN_INFO, ha, "3:Device state is 0x%x = %s\n", dev_state,
+               dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown");
+
        /* Force to DEV_COLD unless someone else is starting a reset */
        if (dev_state != QLA82XX_DEV_INITIALIZING) {
                qla_printk(KERN_INFO, ha, "HW State: COLD/RE-INIT\n");
@@ -3398,7 +3389,6 @@ int
 qla82xx_device_state_handler(scsi_qla_host_t *vha)
 {
        uint32_t dev_state;
-       uint32_t drv_active;
        int rval = QLA_SUCCESS;
        unsigned long dev_init_timeout;
        struct qla_hw_data *ha = vha->hw;
@@ -3407,38 +3397,9 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha)
        if (!vha->flags.init_done)
                qla82xx_set_drv_active(vha);
 
-       /* Set cold state*/
-       if (!PCI_FUNC(ha->pdev->devfn & 1)) {
-
-               /* Check if other functions alive, else set dev state
-                * to cold
-                */
-               drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE);
-               drv_active &= ~(1 << (ha->portnum * 4));
-               drv_active &= ~(1 << ((ha->portnum + 1) * 4));
-
-               dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
-               if (!drv_active) {
-
-                       switch (dev_state) {
-                       case QLA82XX_DEV_COLD:
-                       case QLA82XX_DEV_READY:
-                       case QLA82XX_DEV_INITIALIZING:
-                       case QLA82XX_DEV_NEED_RESET:
-                       case QLA82XX_DEV_NEED_QUIESCENT:
-                       case QLA82XX_DEV_QUIESCENT:
-                       case QLA82XX_DEV_FAILED:
-                               break;
-                       default:
-                               qla_printk(KERN_INFO, ha,
-                                       "No other function exist,"
-                                       " resetting dev state to COLD\n");
-                               qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
-                                       QLA82XX_DEV_COLD);
-                               break;
-                       }
-               }
-       }
+       dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+       qla_printk(KERN_INFO, ha, "1:Device state is 0x%x = %s\n", dev_state,
+               dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown");
 
        /* wait for 30 seconds for device to go ready */
        dev_init_timeout = jiffies + (ha->nx_dev_init_timeout * HZ);
@@ -3453,6 +3414,11 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha)
                        break;
                }
                dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+               qla_printk(KERN_INFO, ha,
+                       "2:Device state is 0x%x = %s\n", dev_state,
+                       dev_state < MAX_STATES ?
+                       qdev_state[dev_state] : "Unknown");
+
                switch (dev_state) {
                case QLA82XX_DEV_READY:
                        goto exit;
@@ -3545,12 +3511,14 @@ qla82xx_abort_isp(scsi_qla_host_t *vha)
 
        qla82xx_idc_lock(ha);
        dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
-       if (dev_state != QLA82XX_DEV_INITIALIZING) {
+       if (dev_state == QLA82XX_DEV_READY) {
                qla_printk(KERN_INFO, ha, "HW State: NEED RESET\n");
                qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
                        QLA82XX_DEV_NEED_RESET);
        } else
-               qla_printk(KERN_INFO, ha, "HW State: DEVICE INITIALIZING\n");
+               qla_printk(KERN_INFO, ha, "HW State: %s\n",
+                       dev_state < MAX_STATES ?
+                       qdev_state[dev_state] : "Unknown");
        qla82xx_idc_unlock(ha);
 
        rval = qla82xx_device_state_handler(vha);
@@ -3561,6 +3529,39 @@ qla82xx_abort_isp(scsi_qla_host_t *vha)
 
        if (rval == QLA_SUCCESS)
                qla82xx_restart_isp(vha);
+
+       if (rval) {
+               vha->flags.online = 1;
+               if (test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
+                       if (ha->isp_abort_cnt == 0) {
+                               qla_printk(KERN_WARNING, ha,
+                                   "ISP error recovery failed - "
+                                   "board disabled\n");
+                               /*
+                                * The next call disables the board
+                                * completely.
+                                */
+                               ha->isp_ops->reset_adapter(vha);
+                               vha->flags.online = 0;
+                               clear_bit(ISP_ABORT_RETRY,
+                                   &vha->dpc_flags);
+                               rval = QLA_SUCCESS;
+                       } else { /* schedule another ISP abort */
+                               ha->isp_abort_cnt--;
+                               DEBUG(qla_printk(KERN_INFO, ha,
+                                   "qla%ld: ISP abort - retry remaining %d\n",
+                                   vha->host_no, ha->isp_abort_cnt));
+                               rval = QLA_FUNCTION_FAILED;
+                       }
+               } else {
+                       ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT;
+                       DEBUG(qla_printk(KERN_INFO, ha,
+                           "(%ld): ISP error recovery - retrying (%d) "
+                           "more times\n", vha->host_no, ha->isp_abort_cnt));
+                       set_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
+                       rval = QLA_FUNCTION_FAILED;
+               }
+       }
        return rval;
 }
 

diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index 7804bbbb3db31191bf4f232759463a81d2eba0b5..f8f99a5ea5328ca5491282593cc476aae97f68fa 100644 (file)
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -545,13 +545,14 @@
 #define QLA82XX_CRB_DEV_PART_INFO    (QLA82XX_CAM_RAM(0x14c))
 
 /* Every driver should use these Device State */
-#define QLA82XX_DEV_COLD           1
-#define QLA82XX_DEV_INITIALIZING    2
-#define QLA82XX_DEV_READY          3
-#define QLA82XX_DEV_NEED_RESET     4
-#define QLA82XX_DEV_NEED_QUIESCENT  5
-#define QLA82XX_DEV_FAILED         6
-#define QLA82XX_DEV_QUIESCENT      7
+#define QLA82XX_DEV_COLD               1
+#define QLA82XX_DEV_INITIALIZING       2
+#define QLA82XX_DEV_READY              3
+#define QLA82XX_DEV_NEED_RESET         4
+#define QLA82XX_DEV_NEED_QUIESCENT     5
+#define QLA82XX_DEV_FAILED             6
+#define QLA82XX_DEV_QUIESCENT          7
+#define        MAX_STATES                      8 /* Increment if new state added */
 
 #define QLA82XX_IDC_VERSION                    1
 #define QLA82XX_ROM_DEV_INIT_TIMEOUT           30