via-*: Move the VIA drivers

Move the VIA drivers into drivers/net/ethernet/via/ and make the
necessary Kconfig and Makefile changes.

CC: Roger Luethi <rl@hellgate.ch>
CC: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/MAINTAINERS b/MAINTAINERS
index b9acfdee10e873c43b04dc4a766ff33c30336941..51d9281a30355f58a78bedcb133cf900b2cce448 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6988,7 +6988,7 @@ F:        include/linux/vhost.h
 VIA RHINE NETWORK DRIVER
 M:     Roger Luethi <rl@hellgate.ch>
 S:     Maintained
-F:     drivers/net/via-rhine.c
+F:     drivers/net/ethernet/via/via-rhine.c
 
 VIAPRO SMBUS DRIVER
 M:     Jean Delvare <khali@linux-fr.org>
@@ -7016,7 +7016,7 @@ VIA VELOCITY NETWORK DRIVER
 M:     Francois Romieu <romieu@fr.zoreil.com>
 L:     netdev@vger.kernel.org
 S:     Maintained
-F:     drivers/net/via-velocity.*
+F:     drivers/net/ethernet/via/via-velocity.*
 
 VLAN (802.1Q)
 M:     Patrick McHardy <kaber@trash.net>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index cb6c6947b3200ad6e79093a0bfc23aba52042c3d..c1e491add8f998940fbf6dc175f55209a4cf5c63 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -614,30 +614,6 @@ config KS8851_MLL
          This platform driver is for Micrel KS8851 Address/data bus
          multiplexed network chip.
 
-config VIA_RHINE
-       tristate "VIA Rhine support"
-       depends on NET_PCI && PCI
-       select CRC32
-       select MII
-       help
-         If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
-         Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
-         Ethernet functions can also be found integrated on South Bridges
-         (e.g. VT8235).
-
-         To compile this driver as a module, choose M here. The module
-         will be called via-rhine.
-
-config VIA_RHINE_MMIO
-       bool "Use MMIO instead of PIO"
-       depends on VIA_RHINE
-       help
-         This instructs the driver to use PCI shared memory (MMIO) instead of
-         programmed I/O ports (PIO). Enabling this gives an improvement in
-         processing time in parts of the driver.
-
-         If unsure, say Y.
-
 config CPMAC
        tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
        depends on NET_ETHERNET && EXPERIMENTAL && AR7
@@ -793,18 +769,6 @@ config SIS190
          To compile this driver as a module, choose M here: the module
          will be called sis190.  This is recommended.
 
-config VIA_VELOCITY
-       tristate "VIA Velocity support"
-       depends on PCI
-       select CRC32
-       select CRC_CCITT
-       select MII
-       help
-         If you have a VIA "Velocity" based network card say Y here.
-
-         To compile this driver as a module, choose M here. The module
-         will be called via-velocity.
-
 config SPIDER_NET
        tristate "Spider Gigabit Ethernet driver"
        depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 69ca6a009c59b7beab146d6a7743d8613aa47e31..7e1128fd62bdcd8ebf304a583e9aae9addfc9d73 100644 (file)
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -51,8 +51,6 @@ obj-$(CONFIG_KS8842)  += ks8842.o
 obj-$(CONFIG_KS8851)   += ks8851.o
 obj-$(CONFIG_KS8851_MLL)       += ks8851_mll.o
 obj-$(CONFIG_KSZ884X_PCI)      += ksz884x.o
-obj-$(CONFIG_VIA_RHINE) += via-rhine.o
-obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
 obj-$(CONFIG_RIONET) += rionet.o
 obj-$(CONFIG_SH_ETH) += sh_eth.o

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 1c447d96d7e5dd6c00a4cffd8fa1ad30a77d1148..bdc0df873daf636761f281d6c7fdf6886a93d286 100644 (file)
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -45,5 +45,6 @@ source "drivers/net/ethernet/smsc/Kconfig"
 source "drivers/net/ethernet/stmicro/Kconfig"
 source "drivers/net/ethernet/sun/Kconfig"
 source "drivers/net/ethernet/tehuti/Kconfig"
+source "drivers/net/ethernet/via/Kconfig"
 
 endif # ETHERNET

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 48c8656b96c28bb0343b3d82aeaee0ec1fb22d0f..ac60ac9026bb895d7037726a809b7c319b5d4e34 100644 (file)
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -36,3 +36,4 @@ obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
 obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
 obj-$(CONFIG_NET_VENDOR_SUN) += sun/
 obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
+obj-$(CONFIG_NET_VENDOR_VIA) += via/

diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig
new file mode 100644 (file)
index 0000000..7199194
--- /dev/null
+++ b/drivers/net/ethernet/via/Kconfig
@@ -0,0 +1,56 @@
+#
+# VIA device configuration
+#
+
+config NET_VENDOR_VIA
+       bool "VIA devices"
+       depends on PCI
+       ---help---
+         If you have a network (Ethernet) card belonging to this class, say Y
+         and read the Ethernet-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>.
+
+         Note that the answer to this question doesn't directly affect the
+         kernel: saying N will just cause the configurator to skip all
+         the questions about VIA devices. If you say Y, you will be asked for
+         your specific card in the following questions.
+
+if NET_VENDOR_VIA
+
+config VIA_RHINE
+       tristate "VIA Rhine support"
+       depends on PCI
+       select CRC32
+       select MII
+       ---help---
+         If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
+         Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
+         Ethernet functions can also be found integrated on South Bridges
+         (e.g. VT8235).
+
+         To compile this driver as a module, choose M here. The module
+         will be called via-rhine.
+
+config VIA_RHINE_MMIO
+       bool "Use MMIO instead of PIO"
+       depends on VIA_RHINE
+       ---help---
+         This instructs the driver to use PCI shared memory (MMIO) instead of
+         programmed I/O ports (PIO). Enabling this gives an improvement in
+         processing time in parts of the driver.
+
+         If unsure, say Y.
+
+config VIA_VELOCITY
+       tristate "VIA Velocity support"
+       depends on PCI
+       select CRC32
+       select CRC_CCITT
+       select MII
+       ---help---
+         If you have a VIA "Velocity" based network card say Y here.
+
+         To compile this driver as a module, choose M here. The module
+         will be called via-velocity.
+
+endif # NET_VENDOR_VIA

diff --git a/drivers/net/ethernet/via/Makefile b/drivers/net/ethernet/via/Makefile
new file mode 100644 (file)
index 0000000..46c5d4a
--- /dev/null
+++ b/drivers/net/ethernet/via/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the VIA device drivers.
+#
+
+obj-$(CONFIG_VIA_RHINE) += via-rhine.o
+obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o

diff --git a/drivers/net/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
similarity index 100%
rename from drivers/net/via-rhine.c
rename to drivers/net/ethernet/via/via-rhine.c

diff --git a/drivers/net/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
similarity index 100%
rename from drivers/net/via-velocity.c
rename to drivers/net/ethernet/via/via-velocity.c

diff --git a/drivers/net/via-velocity.h b/drivers/net/ethernet/via/via-velocity.h
similarity index 100%
rename from drivers/net/via-velocity.h
rename to drivers/net/ethernet/via/via-velocity.h