--- /dev/null
+* Samsung Exynos3250 Clock Controller
+
+The Exynos3250 clock controller generates and supplies clock to various
+controllers within the Exynos3250 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos3250.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+ cmu: clock-controller@10030000 {
+ compatible = "samsung,exynos3250-cmu";
+ reg = <0x10030000 0x20000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ serial@13800000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13800000 0x100>;
+ interrupts = <0 109 0>;
+ clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
--- /dev/null
+* Samsung Exynos5260 Clock Controller
+
+Exynos5260 has 13 clock controllers which are instantiated
+independently from the device-tree. These clock controllers
+generate and supply clocks to various hardware blocks within
+the SoC.
+
+Each clock is assigned an identifier and client nodes can use
+this identifier to specify the clock which they consume. All
+available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5260-clk.h header and can be used in
+device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It
+is expected that they are defined using standard clock bindings
+with following clock-output-names:
+
+ - "fin_pll" - PLL input clock from XXTI
+ - "xrtcxti" - input clock from XRTCXTI
+ - "ioclk_pcm_extclk" - pcm external operation clock
+ - "ioclk_spdif_extclk" - spdif external operation clock
+ - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+Phy clocks:
+
+There are several clocks which are generated by specific PHYs.
+These clocks are fed into the clock controller and then routed to
+the hardware blocks. These clocks are defined as fixed clocks in the
+driver with following names:
+
+ - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+ - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+ - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+ - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+ - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+ - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+ - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+ - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+ - "phyclk_dptx_phy_clk_div2"
+ - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+ - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+ - "phyclk_usbhost20_phy_freeclk"
+ - "phyclk_usbhost20_phy_clk48mohci"
+ - "phyclk_usbdrd30_udrd30_pipe_pclk"
+ - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+Required Properties for Clock Controller:
+
+ - compatible: should be one of the following.
+ 1) "samsung,exynos5260-clock-top"
+ 2) "samsung,exynos5260-clock-peri"
+ 3) "samsung,exynos5260-clock-egl"
+ 4) "samsung,exynos5260-clock-kfc"
+ 5) "samsung,exynos5260-clock-g2d"
+ 6) "samsung,exynos5260-clock-mif"
+ 7) "samsung,exynos5260-clock-mfc"
+ 8) "samsung,exynos5260-clock-g3d"
+ 9) "samsung,exynos5260-clock-fsys"
+ 10) "samsung,exynos5260-clock-aud"
+ 11) "samsung,exynos5260-clock-isp"
+ 12) "samsung,exynos5260-clock-gscl"
+ 13) "samsung,exynos5260-clock-disp"
+
+ - reg: physical base address of the controller and the length of
+ memory mapped region.
+
+ - #clock-cells: should be 1.
+
+ - clocks: list of clock identifiers which are fed as the input to
+ the given clock controller. Please refer the next section to find
+ the input clocks for a given controller.
+
+ - clock-names: list of names of clocks which are fed as the input
+ to the given clock controller.
+
+Input clocks for top clock controller:
+ - fin_pll
+ - dout_mem_pll
+ - dout_bus_pll
+ - dout_media_pll
+
+Input clocks for peri clock controller:
+ - fin_pll
+ - ioclk_pcm_extclk
+ - ioclk_i2s_cdclk
+ - ioclk_spdif_extclk
+ - phyclk_hdmi_phy_ref_cko
+ - dout_aclk_peri_66
+ - dout_sclk_peri_uart0
+ - dout_sclk_peri_uart1
+ - dout_sclk_peri_uart2
+ - dout_sclk_peri_spi0_b
+ - dout_sclk_peri_spi1_b
+ - dout_sclk_peri_spi2_b
+ - dout_aclk_peri_aud
+ - dout_sclk_peri_spi0_b
+
+Input clocks for egl clock controller:
+ - fin_pll
+ - dout_bus_pll
+
+Input clocks for kfc clock controller:
+ - fin_pll
+ - dout_media_pll
+
+Input clocks for g2d clock controller:
+ - fin_pll
+ - dout_aclk_g2d_333
+
+Input clocks for mif clock controller:
+ - fin_pll
+
+Input clocks for mfc clock controller:
+ - fin_pll
+ - dout_aclk_mfc_333
+
+Input clocks for g3d clock controller:
+ - fin_pll
+
+Input clocks for fsys clock controller:
+ - fin_pll
+ - phyclk_usbhost20_phy_phyclock
+ - phyclk_usbhost20_phy_freeclk
+ - phyclk_usbhost20_phy_clk48mohci
+ - phyclk_usbdrd30_udrd30_pipe_pclk
+ - phyclk_usbdrd30_udrd30_phyclock
+ - dout_aclk_fsys_200
+
+Input clocks for aud clock controller:
+ - fin_pll
+ - fout_aud_pll
+ - ioclk_i2s_cdclk
+ - ioclk_pcm_extclk
+
+Input clocks for isp clock controller:
+ - fin_pll
+ - dout_aclk_isp1_266
+ - dout_aclk_isp1_400
+ - mout_aclk_isp1_266
+
+Input clocks for gscl clock controller:
+ - fin_pll
+ - dout_aclk_gscl_400
+ - dout_aclk_gscl_333
+
+Input clocks for disp clock controller:
+ - fin_pll
+ - phyclk_dptx_phy_ch3_txd_clk
+ - phyclk_dptx_phy_ch2_txd_clk
+ - phyclk_dptx_phy_ch1_txd_clk
+ - phyclk_dptx_phy_ch0_txd_clk
+ - phyclk_hdmi_phy_tmds_clko
+ - phyclk_hdmi_phy_ref_clko
+ - phyclk_hdmi_phy_pixel_clko
+ - phyclk_hdmi_link_o_tmds_clkhi
+ - phyclk_mipi_dphy_4l_m_txbyte_clkhs
+ - phyclk_dptx_phy_o_ref_clk_24m
+ - phyclk_dptx_phy_clk_div2
+ - phyclk_mipi_dphy_4l_m_rxclkesc0
+ - phyclk_hdmi_phy_ref_cko
+ - ioclk_spdif_extclk
+ - dout_aclk_peri_aud
+ - dout_aclk_disp_222
+ - dout_sclk_disp_pixel
+ - dout_aclk_disp_333
+
+Example 1: An example of a clock controller node is listed below.
+
+ clock_mfc: clock-controller@11090000 {
+ compatible = "samsung,exynos5260-clock-mfc";
+ clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>;
+ clock-names = "fin_pll", "dout_aclk_mfc_333";
+ reg = <0x11090000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the
+ peri clock controller. Refer to the standard clock bindings for
+ information about 'clocks' and 'clock-names' property.
+
+ serial@12C00000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C00000 0x100>;
+ interrupts = <0 146 0>;
+ clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
+
* Samsung Exynos5420 Clock Controller
The Exynos5420 clock controller generates and supplies clock to various
-controllers within the Exynos5420 SoC.
+controllers within the Exynos5420 SoC and for the Exynos5800 SoC.
Required Properties:
- compatible: should be one of the following.
- "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
+ - "samsung,exynos5800-clock" - controller compatible with Exynos5800 SoC.
- reg: physical base address of the controller and length of memory mapped
region.
--- /dev/null
+* Samsung S3C2410 Clock Controller
+
+The S3C2410 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to the s3c2410,
+s3c2440 and s3c2442 SoCs in the s3c24x family.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC.
+ - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC.
+ - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2410.h header and can be used in device
+tree sources.
+
+External clocks:
+
+The xti clock used as input for the plls is generated outside the SoC. It is
+expected that is are defined using standard clock bindings with a
+clock-output-names value of "xti".
+
+Example: Clock controller node:
+
+ clocks: clock-controller@4c000000 {
+ compatible = "samsung,s3c2410-clock";
+ reg = <0x4c000000 0x20>;
+ #clock-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller (refer to the standard clock bindings for information about
+ "clocks" and "clock-names" properties):
+
+ serial@50004000 {
+ compatible = "samsung,s3c2440-uart";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1 23 3 4>, <1 23 4 4>;
+ clock-names = "uart", "clk_uart_baud2";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
+ status = "disabled";
+ };
--- /dev/null
+* Samsung S3C2412 Clock Controller
+
+The S3C2412 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to the s3c2412
+and s3c2413 SoCs in the s3c24x family.
+
+Required Properties:
+
+- compatible: should be "samsung,s3c2412-clock"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2412.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xti" - crystal input - required,
+ - "ext" - external clock source - optional,
+
+Example: Clock controller node:
+
+ clocks: clock-controller@4c000000 {
+ compatible = "samsung,s3c2412-clock";
+ reg = <0x4c000000 0x20>;
+ #clock-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller (refer to the standard clock bindings for information about
+ "clocks" and "clock-names" properties):
+
+ serial@50004000 {
+ compatible = "samsung,s3c2412-uart";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1 23 3 4>, <1 23 4 4>;
+ clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clocks SCLK_UART>;
+ status = "disabled";
+ };
--- /dev/null
+* Samsung S3C2443 Clock Controller
+
+The S3C2443 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to all SoCs in
+the s3c24x family starting with the s3c2443.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC.
+ - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC.
+ - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2443.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xti" - crystal input - required,
+ - "ext" - external clock source - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_uart" - external uart clock - optional,
+
+Example: Clock controller node:
+
+ clocks: clock-controller@4c000000 {
+ compatible = "samsung,s3c2416-clock";
+ reg = <0x4c000000 0x40>;
+ #clock-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller (refer to the standard clock bindings for information about
+ "clocks" and "clock-names" properties):
+
+ serial@50004000 {
+ compatible = "samsung,s3c2440-uart";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1 23 3 4>, <1 23 4 4>;
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clocks SCLK_UART>;
+ status = "disabled";
+ };
select ATAGS
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
- select COMMON_CLK
+ select COMMON_CLK_SAMSUNG
select CPU_V6K
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
select ARCH_REQUIRE_GPIOLIB
select ARCH_SPARSEMEM_ENABLE
select ARM_GIC
- select COMMON_CLK
+ select COMMON_CLK_SAMSUNG
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_S3C2410_I2C if I2C
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c4_hs_bus>;
- clocks = <&clock CLK_I2C4>;
+ clocks = <&clock CLK_USI0>;
clock-names = "hsi2c";
status = "disabled";
};
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c5_hs_bus>;
- clocks = <&clock CLK_I2C5>;
+ clocks = <&clock CLK_USI1>;
clock-names = "hsi2c";
status = "disabled";
};
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c6_hs_bus>;
- clocks = <&clock CLK_I2C6>;
+ clocks = <&clock CLK_USI2>;
clock-names = "hsi2c";
status = "disabled";
};
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c7_hs_bus>;
- clocks = <&clock CLK_I2C7>;
+ clocks = <&clock CLK_USI3>;
clock-names = "hsi2c";
status = "disabled";
};
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c8_hs_bus>;
- clocks = <&clock CLK_I2C8>;
+ clocks = <&clock CLK_USI4>;
clock-names = "hsi2c";
status = "disabled";
};
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c9_hs_bus>;
- clocks = <&clock CLK_I2C9>;
+ clocks = <&clock CLK_USI5>;
clock-names = "hsi2c";
status = "disabled";
};
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c10_hs_bus>;
- clocks = <&clock CLK_I2C10>;
+ clocks = <&clock CLK_USI6>;
clock-names = "hsi2c";
status = "disabled";
};
reg = <0x30000000 0x4000000>;
};
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ xti: xti {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ clock-output-names = "xti";
+ #clock-cells = <0>;
+ };
+ };
+
serial@50000000 {
status = "okay";
pinctrl-names = "default";
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/s3c2443.h>
#include "s3c24xx.dtsi"
#include "s3c2416-pinctrl.dtsi"
compatible = "samsung,s3c2416-irq";
};
+ clocks: clock-controller@0x4c000000 {
+ compatible = "samsung,s3c2416-clock";
+ reg = <0x4c000000 0x40>;
+ #clock-cells = <1>;
+ };
+
pinctrl@56000000 {
compatible = "samsung,s3c2416-pinctrl";
};
+ timer@51000000 {
+ clocks = <&clocks PCLK_PWM>;
+ clock-names = "timers";
+ };
+
serial@50000000 {
compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clocks SCLK_UART>;
};
serial@50004000 {
compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+ <&clocks SCLK_UART>;
};
serial@50008000 {
compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+ <&clocks SCLK_UART>;
};
serial@5000C000 {
compatible = "samsung,s3c2440-uart";
reg = <0x5000C000 0x4000>;
interrupts = <1 18 24 4>, <1 18 25 4>;
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+ <&clocks SCLK_UART>;
status = "disabled";
};
compatible = "samsung,s3c6410-sdhci";
reg = <0x4AC00000 0x100>;
interrupts = <0 0 21 3>;
+ clock-names = "hsmmc", "mmc_busclk.0",
+ "mmc_busclk.2";
+ clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+ <&clocks MUX_HSMMC0>;
status = "disabled";
};
compatible = "samsung,s3c6410-sdhci";
reg = <0x4A800000 0x100>;
interrupts = <0 0 20 3>;
+ clock-names = "hsmmc", "mmc_busclk.0",
+ "mmc_busclk.2";
+ clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+ <&clocks MUX_HSMMC1>;
status = "disabled";
};
watchdog@53000000 {
interrupts = <1 9 27 3>;
+ clocks = <&clocks PCLK_WDT>;
+ clock-names = "watchdog";
};
rtc@57000000 {
compatible = "samsung,s3c2416-rtc";
+ clocks = <&clocks PCLK_RTC>;
+ clock-names = "rtc";
};
i2c@54000000 {
compatible = "samsung,s3c2440-i2c";
+ clocks = <&clocks PCLK_I2C0>;
+ clock-names = "i2c";
};
};
help
Base platform code for any Samsung S3C24XX device
+
+
menu "SAMSUNG S3C24XX SoCs Support"
comment "S3C24XX SoCs"
default y
select CPU_ARM920T
select CPU_LLSERIAL_S3C2410
- select S3C2410_CLOCK
+ select S3C2410_COMMON_CLK
select S3C2410_DMA if S3C24XX_DMA
select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
select S3C2410_PM if PM
bool "SAMSUNG S3C2412"
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
+ select S3C2412_COMMON_CLK
select S3C2412_DMA if S3C24XX_DMA
select S3C2412_PM if PM
help
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
select S3C2416_PM if PM
- select S3C2443_COMMON
+ select S3C2443_COMMON_CLK
select S3C2443_DMA if S3C24XX_DMA
- select SAMSUNG_CLKSRC
help
Support for the S3C2416 SoC from the S3C24XX line
bool "SAMSUNG S3C2440"
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
- select S3C2410_CLOCK
+ select S3C2410_COMMON_CLK
select S3C2410_PM if PM
select S3C2440_DMA if S3C24XX_DMA
help
bool "SAMSUNG S3C2442"
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
- select S3C2410_CLOCK
+ select S3C2410_COMMON_CLK
select S3C2410_DMA if S3C24XX_DMA
select S3C2410_PM if PM
help
bool "SAMSUNG S3C2443"
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
- select S3C2443_COMMON
+ select S3C2443_COMMON_CLK
select S3C2443_DMA if S3C24XX_DMA
- select SAMSUNG_CLKSRC
help
Support for the S3C2443 SoC from the S3C24XX line
# common code
-config S3C2410_CLOCK
- bool
- help
- Clock code for the S3C2410, and similar processors which
- is currently includes the S3C2410, S3C2440, S3C2442.
-
-config S3C24XX_DCLK
- bool
- help
- Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-
config S3C24XX_SMDK
bool
help
bool "Simtec Electronics BAST (EB2410ITX)"
select ISA
select MACH_BAST_IDE
+ select S3C2410_COMMON_DCLK
select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
- select S3C24XX_DCLK
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_USB
config MACH_VR1000
bool "Thorcom VR1000"
select MACH_BAST_IDE
- select S3C24XX_DCLK
+ select S3C2410_COMMON_DCLK
select S3C24XX_SIMTEC_NOR
select S3C24XX_SIMTEC_PM if PM
select S3C24XX_SIMTEC_USB
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select HAVE_PATA_PLATFORM
+ select S3C2410_COMMON_DCLK
select S3C2440_XTAL_12000000
- select S3C24XX_DCLK
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_USB_HOST
help
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
+ select S3C2410_COMMON_DCLK
select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_12000000
- select S3C24XX_DCLK
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
bool "HP iPAQ rx1950"
select I2C
select PM_H1940 if PM
+ select S3C2410_COMMON_DCLK
select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
- select S3C24XX_DCLK
select S3C24XX_PWM
select S3C_DEV_NAND
help
if CPU_S3C2443 || CPU_S3C2416
-config S3C2443_COMMON
- bool
- help
- Common code for the S3C2443 and similar processors, which includes
- the S3C2416 and S3C2450.
-
config S3C2443_DMA
bool
help
obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
-obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
-obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o
+obj-$(CONFIG_CPU_S3C2416) += s3c2416.o
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
-obj-$(CONFIG_CPU_S3C2443) += s3c2443.o clock-s3c2443.o
+obj-$(CONFIG_CPU_S3C2443) += s3c2443.o
# PM
# common code
-obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
obj-$(CONFIG_S3C24XX_DMA) += dma.o
-obj-$(CONFIG_S3C2410_CLOCK) += clock-s3c2410.o
obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o
obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o
-obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o
obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o
#
+++ /dev/null
-/*
- * Copyright (c) 2004-2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX - definitions for DCLK and CLKOUT registers
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
- unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
- if (enable)
- dclkcon |= clk->ctrlbit;
- else
- dclkcon &= ~clk->ctrlbit;
-
- __raw_writel(dclkcon, S3C24XX_DCLKCON);
-
- return 0;
-}
-
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
- unsigned long dclkcon;
- unsigned int uclk;
-
- if (parent == &clk_upll)
- uclk = 1;
- else if (parent == &clk_p)
- uclk = 0;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
- if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
- if (uclk)
- dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
- else
- dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
- } else {
- if (uclk)
- dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
- else
- dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
- }
-
- __raw_writel(dclkcon, S3C24XX_DCLKCON);
-
- return 0;
-}
-static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
-{
- unsigned long div;
-
- if ((rate == 0) || !clk->parent)
- return 0;
-
- div = clk_get_rate(clk->parent) / rate;
- if (div < 2)
- div = 2;
- else if (div > 16)
- div = 16;
-
- return div;
-}
-
-static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long div = s3c24xx_calc_div(clk, rate);
-
- if (div == 0)
- return 0;
-
- return clk_get_rate(clk->parent) / div;
-}
-
-static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
-
- if (div == 0)
- return -EINVAL;
-
- if (clk == &s3c24xx_dclk0) {
- mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
- S3C2410_DCLKCON_DCLK0_CMP_MASK;
- data = S3C2410_DCLKCON_DCLK0_DIV(div) |
- S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
- } else if (clk == &s3c24xx_dclk1) {
- mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
- S3C2410_DCLKCON_DCLK1_CMP_MASK;
- data = S3C2410_DCLKCON_DCLK1_DIV(div) |
- S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
- } else
- return -EINVAL;
-
- clk->rate = clk_get_rate(clk->parent) / div;
- __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
- S3C24XX_DCLKCON);
- return clk->rate;
-}
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
- unsigned long mask;
- unsigned long source;
-
- /* calculate the MISCCR setting for the clock */
-
- if (parent == &clk_mpll)
- source = S3C2410_MISCCR_CLK0_MPLL;
- else if (parent == &clk_upll)
- source = S3C2410_MISCCR_CLK0_UPLL;
- else if (parent == &clk_f)
- source = S3C2410_MISCCR_CLK0_FCLK;
- else if (parent == &clk_h)
- source = S3C2410_MISCCR_CLK0_HCLK;
- else if (parent == &clk_p)
- source = S3C2410_MISCCR_CLK0_PCLK;
- else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
- source = S3C2410_MISCCR_CLK0_DCLK0;
- else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
- source = S3C2410_MISCCR_CLK0_DCLK0;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- if (clk == &s3c24xx_clkout0)
- mask = S3C2410_MISCCR_CLK0_MASK;
- else {
- source <<= 4;
- mask = S3C2410_MISCCR_CLK1_MASK;
- }
-
- s3c2410_modify_misccr(mask, source);
- return 0;
-}
-
-/* external clock definitions */
-
-static struct clk_ops dclk_ops = {
- .set_parent = s3c24xx_dclk_setparent,
- .set_rate = s3c24xx_set_dclk_rate,
- .round_rate = s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_dclk0 = {
- .name = "dclk0",
- .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
- .enable = s3c24xx_dclk_enable,
- .ops = &dclk_ops,
-};
-
-struct clk s3c24xx_dclk1 = {
- .name = "dclk1",
- .ctrlbit = S3C2410_DCLKCON_DCLK1EN,
- .enable = s3c24xx_dclk_enable,
- .ops = &dclk_ops,
-};
-
-static struct clk_ops clkout_ops = {
- .set_parent = s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_clkout0 = {
- .name = "clkout0",
- .ops = &clkout_ops,
-};
-
-struct clk s3c24xx_clkout1 = {
- .name = "clkout1",
- .ops = &clkout_ops,
-};
+++ /dev/null
-/*
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
- unsigned int clocks = clk->ctrlbit;
- unsigned long clkcon;
-
- clkcon = __raw_readl(S3C2410_CLKCON);
-
- if (enable)
- clkcon |= clocks;
- else
- clkcon &= ~clocks;
-
- /* ensure none of the special function bits set */
- clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
- __raw_writel(clkcon, S3C2410_CLKCON);
-
- return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
- unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
- unsigned long orig = clkslow;
-
- if (enable)
- clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
- else
- clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
- __raw_writel(clkslow, S3C2410_CLKSLOW);
-
- /* if we started the UPLL, then allow to settle */
-
- if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
- udelay(200);
-
- return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
- {
- .name = "nand",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_NAND,
- }, {
- .name = "sdi",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_SDI,
- }, {
- .name = "adc",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_ADC,
- }, {
- .name = "i2c",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_IIC,
- }, {
- .name = "iis",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_IIS,
- }, {
- .name = "spi",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_SPI,
- }
-};
-
-static struct clk clk_lcd = {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_LCDC,
-};
-
-static struct clk clk_gpio = {
- .name = "gpio",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_GPIO,
-};
-
-static struct clk clk_usb_host = {
- .name = "usb-host",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_USBH,
-};
-
-static struct clk clk_usb_device = {
- .name = "usb-device",
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_USBD,
-};
-
-static struct clk clk_timers = {
- .name = "timers",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_PWMT,
-};
-
-struct clk s3c24xx_clk_uart0 = {
- .name = "uart",
- .devname = "s3c2410-uart.0",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART0,
-};
-
-struct clk s3c24xx_clk_uart1 = {
- .name = "uart",
- .devname = "s3c2410-uart.1",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART1,
-};
-
-struct clk s3c24xx_clk_uart2 = {
- .name = "uart",
- .devname = "s3c2410-uart.2",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART2,
-};
-
-static struct clk clk_rtc = {
- .name = "rtc",
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_RTC,
-};
-
-static struct clk clk_watchdog = {
- .name = "watchdog",
- .parent = &clk_p,
- .ctrlbit = 0,
-};
-
-static struct clk clk_usb_bus_host = {
- .name = "usb-bus-host",
- .parent = &clk_usb_bus,
-};
-
-static struct clk clk_usb_bus_gadget = {
- .name = "usb-bus-gadget",
- .parent = &clk_usb_bus,
-};
-
-static struct clk *init_clocks[] = {
- &clk_lcd,
- &clk_gpio,
- &clk_usb_host,
- &clk_usb_device,
- &clk_timers,
- &s3c24xx_clk_uart0,
- &s3c24xx_clk_uart1,
- &s3c24xx_clk_uart2,
- &clk_rtc,
- &clk_watchdog,
- &clk_usb_bus_host,
- &clk_usb_bus_gadget,
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
- unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
- unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
- struct clk *xtal;
- int ret;
- int ptr;
-
- clk_upll.enable = s3c2410_upll_enable;
-
- if (s3c24xx_register_clock(&clk_usb_bus) < 0)
- printk(KERN_ERR "failed to register usb bus clock\n");
-
- /* register clocks from clock array */
-
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
- struct clk *clkp = init_clocks[ptr];
-
- /* ensure that we note the clock state */
-
- clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
- /* We must be careful disabling the clocks we are not intending to
- * be using at boot time, as subsystems such as the LCD which do
- * their own DMA requests to the bus can cause the system to lockup
- * if they where in the middle of requesting bus access.
- *
- * Disabling the LCD clock if the LCD is active is very dangerous,
- * and therefore the bootloader should be careful to not enable
- * the LCD clock if it is not needed.
- */
-
- /* install (and disable) the clocks we do not need immediately */
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- /* show the clock-slow value */
-
- xtal = clk_get(NULL, "xtal");
-
- printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
- print_mhz(clk_get_rate(xtal) /
- ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
- (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
- (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
- (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
- return 0;
-}
+++ /dev/null
-/* linux/arch/arm/mach-s3c2412/clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412,S3C2413 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-static int s3c2412_clkcon_enable(struct clk *clk, int enable)
-{
- unsigned int clocks = clk->ctrlbit;
- unsigned long clkcon;
-
- clkcon = __raw_readl(S3C2410_CLKCON);
-
- if (enable)
- clkcon |= clocks;
- else
- clkcon &= ~clocks;
-
- __raw_writel(clkcon, S3C2410_CLKCON);
-
- return 0;
-}
-
-static int s3c2412_upll_enable(struct clk *clk, int enable)
-{
- unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
- unsigned long orig = upllcon;
-
- if (!enable)
- upllcon |= S3C2412_PLLCON_OFF;
- else
- upllcon &= ~S3C2412_PLLCON_OFF;
-
- __raw_writel(upllcon, S3C2410_UPLLCON);
-
- /* allow ~150uS for the PLL to settle and lock */
-
- if (enable && (orig & S3C2412_PLLCON_OFF))
- udelay(150);
-
- return 0;
-}
-
-/* clock selections */
-
-static struct clk clk_erefclk = {
- .name = "erefclk",
-};
-
-static struct clk clk_urefclk = {
- .name = "urefclk",
-};
-
-static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
- if (parent == &clk_urefclk)
- clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL;
- else if (parent == &clk_upll)
- clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- __raw_writel(clksrc, S3C2412_CLKSRC);
- return 0;
-}
-
-static struct clk clk_usysclk = {
- .name = "usysclk",
- .parent = &clk_xtal,
- .ops = &(struct clk_ops) {
- .set_parent = s3c2412_setparent_usysclk,
- },
-};
-
-static struct clk clk_mrefclk = {
- .name = "mrefclk",
- .parent = &clk_xtal,
-};
-
-static struct clk clk_mdivclk = {
- .name = "mdivclk",
- .parent = &clk_xtal,
-};
-
-static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
- if (parent == &clk_usysclk)
- clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK;
- else if (parent == &clk_h)
- clksrc |= S3C2412_CLKSRC_USBCLK_HCLK;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- __raw_writel(clksrc, S3C2412_CLKSRC);
- return 0;
-}
-
-static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- div = parent_rate / rate;
- if (div > 2)
- div = 2;
-
- return parent_rate / div;
-}
-
-static unsigned long s3c2412_getrate_usbsrc(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
- return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1);
-}
-
-static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
- rate = s3c2412_roundrate_usbsrc(clk, rate);
-
- if ((parent_rate / rate) == 2)
- clkdivn |= S3C2412_CLKDIVN_USB48DIV;
- else
- clkdivn &= ~S3C2412_CLKDIVN_USB48DIV;
-
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
- return 0;
-}
-
-static struct clk clk_usbsrc = {
- .name = "usbsrc",
- .ops = &(struct clk_ops) {
- .get_rate = s3c2412_getrate_usbsrc,
- .set_rate = s3c2412_setrate_usbsrc,
- .round_rate = s3c2412_roundrate_usbsrc,
- .set_parent = s3c2412_setparent_usbsrc,
- },
-};
-
-static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
- if (parent == &clk_mdivclk)
- clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
- else if (parent == &clk_mpll)
- clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- __raw_writel(clksrc, S3C2412_CLKSRC);
- return 0;
-}
-
-static struct clk clk_msysclk = {
- .name = "msysclk",
- .ops = &(struct clk_ops) {
- .set_parent = s3c2412_setparent_msysclk,
- },
-};
-
-static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
-{
- unsigned long flags;
- unsigned long clkdiv;
- unsigned long dvs;
-
- /* Note, we current equate fclk andf msysclk for S3C2412 */
-
- if (parent == &clk_msysclk || parent == &clk_f)
- dvs = 0;
- else if (parent == &clk_h)
- dvs = S3C2412_CLKDIVN_DVSEN;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- /* update this under irq lockdown, clkdivn is not protected
- * by the clock system. */
-
- local_irq_save(flags);
-
- clkdiv = __raw_readl(S3C2410_CLKDIVN);
- clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
- clkdiv |= dvs;
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-static struct clk clk_armclk = {
- .name = "armclk",
- .parent = &clk_msysclk,
- .ops = &(struct clk_ops) {
- .set_parent = s3c2412_setparent_armclk,
- },
-};
-
-/* these next clocks have an divider immediately after them,
- * so we can register them with their divider and leave out the
- * intermediate clock stage
-*/
-static unsigned long s3c2412_roundrate_clksrc(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- /* note, we remove the +/- 1 calculations as they cancel out */
-
- div = (rate / parent_rate);
-
- if (div < 1)
- div = 1;
- else if (div > 16)
- div = 16;
-
- return parent_rate / div;
-}
-
-static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
- if (parent == &clk_erefclk)
- clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL;
- else if (parent == &clk_mpll)
- clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- __raw_writel(clksrc, S3C2412_CLKSRC);
- return 0;
-}
-
-static unsigned long s3c2412_getrate_uart(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
- div &= S3C2412_CLKDIVN_UARTDIV_MASK;
- div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
- rate = s3c2412_roundrate_clksrc(clk, rate);
-
- clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK;
- clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
- return 0;
-}
-
-static struct clk clk_uart = {
- .name = "uartclk",
- .ops = &(struct clk_ops) {
- .get_rate = s3c2412_getrate_uart,
- .set_rate = s3c2412_setrate_uart,
- .set_parent = s3c2412_setparent_uart,
- .round_rate = s3c2412_roundrate_clksrc,
- },
-};
-
-static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
- if (parent == &clk_erefclk)
- clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL;
- else if (parent == &clk_mpll)
- clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- __raw_writel(clksrc, S3C2412_CLKSRC);
- return 0;
-}
-
-static unsigned long s3c2412_getrate_i2s(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
- div &= S3C2412_CLKDIVN_I2SDIV_MASK;
- div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
- rate = s3c2412_roundrate_clksrc(clk, rate);
-
- clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK;
- clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
- return 0;
-}
-
-static struct clk clk_i2s = {
- .name = "i2sclk",
- .ops = &(struct clk_ops) {
- .get_rate = s3c2412_getrate_i2s,
- .set_rate = s3c2412_setrate_i2s,
- .set_parent = s3c2412_setparent_i2s,
- .round_rate = s3c2412_roundrate_clksrc,
- },
-};
-
-static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
- if (parent == &clk_usysclk)
- clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK;
- else if (parent == &clk_h)
- clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- __raw_writel(clksrc, S3C2412_CLKSRC);
- return 0;
-}
-static unsigned long s3c2412_getrate_cam(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
- div &= S3C2412_CLKDIVN_CAMDIV_MASK;
- div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
- rate = s3c2412_roundrate_clksrc(clk, rate);
-
- clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK;
- clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
- return 0;
-}
-
-static struct clk clk_cam = {
- .name = "camif-upll", /* same as 2440 name */
- .ops = &(struct clk_ops) {
- .get_rate = s3c2412_getrate_cam,
- .set_rate = s3c2412_setrate_cam,
- .set_parent = s3c2412_setparent_cam,
- .round_rate = s3c2412_roundrate_clksrc,
- },
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_disable[] = {
- {
- .name = "nand",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_NAND,
- }, {
- .name = "sdi",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_SDI,
- }, {
- .name = "adc",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_ADC,
- }, {
- .name = "i2c",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_IIC,
- }, {
- .name = "iis",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_IIS,
- }, {
- .name = "spi",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_SPI,
- }
-};
-
-static struct clk init_clocks[] = {
- {
- .name = "dma.0",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_DMA0,
- }, {
- .name = "dma.1",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_DMA1,
- }, {
- .name = "dma.2",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_DMA2,
- }, {
- .name = "dma.3",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_DMA3,
- }, {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_LCDC,
- }, {
- .name = "gpio",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_GPIO,
- }, {
- .name = "usb-host",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_USBH,
- }, {
- .name = "usb-device",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_USBD,
- }, {
- .name = "timers",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_PWMT,
- }, {
- .name = "uart",
- .devname = "s3c2412-uart.0",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_UART0,
- }, {
- .name = "uart",
- .devname = "s3c2412-uart.1",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_UART1,
- }, {
- .name = "uart",
- .devname = "s3c2412-uart.2",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_UART2,
- }, {
- .name = "rtc",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_RTC,
- }, {
- .name = "watchdog",
- .parent = &clk_p,
- .ctrlbit = 0,
- }, {
- .name = "usb-bus-gadget",
- .parent = &clk_usb_bus,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_USB_DEV48,
- }, {
- .name = "usb-bus-host",
- .parent = &clk_usb_bus,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_USB_HOST48,
- }
-};
-
-/* clocks to add where we need to check their parentage */
-
-struct clk_init {
- struct clk *clk;
- unsigned int bit;
- struct clk *src_0;
- struct clk *src_1;
-};
-
-static struct clk_init clks_src[] __initdata = {
- {
- .clk = &clk_usysclk,
- .bit = S3C2412_CLKSRC_USBCLK_HCLK,
- .src_0 = &clk_urefclk,
- .src_1 = &clk_upll,
- }, {
- .clk = &clk_i2s,
- .bit = S3C2412_CLKSRC_I2SCLK_MPLL,
- .src_0 = &clk_erefclk,
- .src_1 = &clk_mpll,
- }, {
- .clk = &clk_cam,
- .bit = S3C2412_CLKSRC_CAMCLK_HCLK,
- .src_0 = &clk_usysclk,
- .src_1 = &clk_h,
- }, {
- .clk = &clk_msysclk,
- .bit = S3C2412_CLKSRC_MSYSCLK_MPLL,
- .src_0 = &clk_mdivclk,
- .src_1 = &clk_mpll,
- }, {
- .clk = &clk_uart,
- .bit = S3C2412_CLKSRC_UARTCLK_MPLL,
- .src_0 = &clk_erefclk,
- .src_1 = &clk_mpll,
- }, {
- .clk = &clk_usbsrc,
- .bit = S3C2412_CLKSRC_USBCLK_HCLK,
- .src_0 = &clk_usysclk,
- .src_1 = &clk_h,
- /* here we assume OM[4] select xtal */
- }, {
- .clk = &clk_erefclk,
- .bit = S3C2412_CLKSRC_EREFCLK_EXTCLK,
- .src_0 = &clk_xtal,
- .src_1 = &clk_ext,
- }, {
- .clk = &clk_urefclk,
- .bit = S3C2412_CLKSRC_UREFCLK_EXTCLK,
- .src_0 = &clk_xtal,
- .src_1 = &clk_ext,
- },
-};
-
-/* s3c2412_clk_initparents
- *
- * Initialise the parents for the clocks that we get at start-time
-*/
-
-static void __init s3c2412_clk_initparents(void)
-{
- unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
- struct clk_init *cip = clks_src;
- struct clk *src;
- int ptr;
- int ret;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) {
- ret = s3c24xx_register_clock(cip->clk);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- cip->clk->name, ret);
- }
-
- src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0;
-
- printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name);
- clk_set_parent(cip->clk, src);
- }
-}
-
-/* clocks to add straight away */
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_usb_bus,
- &clk_mrefclk,
- &clk_armclk,
-};
-
-static struct clk_lookup s3c2412_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk),
-};
-
-int __init s3c2412_baseclk_add(void)
-{
- unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
- unsigned int dvs;
- struct clk *clkp;
- int ret;
- int ptr;
-
- clk_upll.enable = s3c2412_upll_enable;
- clk_usb_bus.parent = &clk_usbsrc;
- clk_usb_bus.rate = 0x0;
-
- clk_f.parent = &clk_msysclk;
-
- s3c2412_clk_initparents();
-
- for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
- clkp = clks[ptr];
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
- /* set the dvs state according to what we got at boot time */
-
- dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
-
- if (dvs)
- clk_armclk.parent = &clk_h;
-
- printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
-
- /* ensure usb bus clock is within correct rate of 48MHz */
-
- if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
- printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n");
-
- /* for the moment, let's use the UPLL, and see if we can
- * get 48MHz */
-
- clk_set_parent(&clk_usysclk, &clk_upll);
- clk_set_parent(&clk_usbsrc, &clk_usysclk);
- clk_set_rate(&clk_usbsrc, 48*1000*1000);
- }
-
- printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
- (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on",
- print_mhz(clk_get_rate(&clk_upll)),
- print_mhz(clk_get_rate(&clk_usb_bus)));
-
- /* register clocks from clock array */
-
- clkp = init_clocks;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
- /* ensure that we note the clock state */
-
- clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
- /* We must be careful disabling the clocks we are not intending to
- * be using at boot time, as subsystems such as the LCD which do
- * their own DMA requests to the bus can cause the system to lockup
- * if they where in the middle of requesting bus access.
- *
- * Disabling the LCD clock if the LCD is active is very dangerous,
- * and therefore the bootloader should be careful to not enable
- * the LCD clock if it is not needed.
- */
-
- /* install (and disable) the clocks we do not need immediately */
-
- clkp = init_clocks_disable;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
-
- s3c2412_clkcon_enable(clkp, 0);
- }
-
- clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup));
- return 0;
-}
+++ /dev/null
-/* linux/arch/arm/mach-s3c2416/clock.c
- *
- * Copyright (c) 2010 Simtec Electronics
- * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * S3C2416 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/pll.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-s3c2443-clock.h>
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[8] = {
- [0] = 1,
- [1] = 2,
- [2] = 3,
- [3] = 4,
- [5] = 6,
- [7] = 8,
-};
-
-static struct clksrc_clk hsspi_eplldiv = {
- .clk = {
- .name = "hsspi-eplldiv",
- .parent = &clk_esysclk.clk,
- .ctrlbit = (1 << 14),
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
-};
-
-static struct clk *hsspi_sources[] = {
- [0] = &hsspi_eplldiv.clk,
- [1] = NULL, /* to fix */
-};
-
-static struct clksrc_clk hsspi_mux = {
- .clk = {
- .name = "hsspi-if",
- },
- .sources = &(struct clksrc_sources) {
- .sources = hsspi_sources,
- .nr_sources = ARRAY_SIZE(hsspi_sources),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
-};
-
-static struct clksrc_clk hsmmc_div[] = {
- [0] = {
- .clk = {
- .name = "hsmmc-div",
- .devname = "s3c-sdhci.0",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
- },
- [1] = {
- .clk = {
- .name = "hsmmc-div",
- .devname = "s3c-sdhci.1",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
- },
-};
-
-static struct clksrc_clk hsmmc_mux0 = {
- .clk = {
- .name = "hsmmc-if",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 6),
- .enable = s3c2443_clkcon_enable_s,
- },
- .sources = &(struct clksrc_sources) {
- .nr_sources = 2,
- .sources = (struct clk * []) {
- [0] = &hsmmc_div[0].clk,
- [1] = NULL, /* to fix */
- },
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
-};
-
-static struct clksrc_clk hsmmc_mux1 = {
- .clk = {
- .name = "hsmmc-if",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 12),
- .enable = s3c2443_clkcon_enable_s,
- },
- .sources = &(struct clksrc_sources) {
- .nr_sources = 2,
- .sources = (struct clk * []) {
- [0] = &hsmmc_div[1].clk,
- [1] = NULL, /* to fix */
- },
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
-};
-
-static struct clk hsmmc0_clk = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2416_HCLKCON_HSMMC0,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
- &hsspi_eplldiv,
- &hsspi_mux,
- &hsmmc_div[0],
- &hsmmc_div[1],
- &hsmmc_mux0,
- &hsmmc_mux1,
-};
-
-static struct clk_lookup s3c2416_clk_lookup[] = {
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
- /* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */
- CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk),
-};
-
-void __init s3c2416_init_clocks(int xtal)
-{
- u32 epllcon = __raw_readl(S3C2443_EPLLCON);
- u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4);
- int ptr;
-
- /* s3c2416 EPLL compatible with s3c64xx */
- clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1);
-
- clk_epll.parent = &clk_epllref.clk;
-
- s3c2443_common_init_clocks(xtal, s3c2416_get_pll,
- armdiv, ARRAY_SIZE(armdiv),
- S3C2416_CLKDIV0_ARMDIV_MASK);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_register_clksrc(clksrcs[ptr], 1);
-
- s3c24xx_register_clock(&hsmmc0_clk);
- clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup));
-
-}
+++ /dev/null
-/* linux/arch/arm/mach-s3c2440/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* S3C2440 extended clock support */
-
-static unsigned long s3c2440_camif_upll_round(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- /* note, we remove the +/- 1 calculations for the divisor */
-
- div = (parent_rate / rate) / 2;
-
- if (div < 1)
- div = 1;
- else if (div > 16)
- div = 16;
-
- return parent_rate / (div * 2);
-}
-
-static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-
- rate = s3c2440_camif_upll_round(clk, rate);
-
- camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
-
- if (rate != parent_rate) {
- camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
- camdivn |= (((parent_rate / rate) / 2) - 1);
- }
-
- __raw_writel(camdivn, S3C2440_CAMDIVN);
-
- return 0;
-}
-
-static unsigned long s3c2440_camif_upll_getrate(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-
- if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL))
- return parent_rate;
-
- camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK;
-
- return parent_rate / (camdivn + 1) / 2;
-}
-
-/* Extra S3C2440 clocks */
-
-static struct clk s3c2440_clk_cam = {
- .name = "camif",
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_cam_upll = {
- .name = "camif-upll",
- .ops = &(struct clk_ops) {
- .set_rate = s3c2440_camif_upll_setrate,
- .get_rate = s3c2440_camif_upll_getrate,
- .round_rate = s3c2440_camif_upll_round,
- },
-};
-
-static struct clk s3c2440_clk_ac97 = {
- .name = "ac97",
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_AC97,
-};
-
-#define S3C24XX_VA_UART0 (S3C_VA_UART)
-#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 )
-#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 )
-#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 )
-
-static unsigned long s3c2440_fclk_n_getrate(struct clk *clk)
-{
- unsigned long ucon0, ucon1, ucon2, divisor;
-
- /* the fun of calculating the uart divisors on the s3c2440 */
- ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
- ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
- ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
- ucon0 &= S3C2440_UCON0_DIVMASK;
- ucon1 &= S3C2440_UCON1_DIVMASK;
- ucon2 &= S3C2440_UCON2_DIVMASK;
-
- if (ucon0 != 0)
- divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
- else if (ucon1 != 0)
- divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
- else if (ucon2 != 0)
- divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
- else
- /* manual calims 44, seems to be 9 */
- divisor = 9;
-
- return clk_get_rate(clk->parent) / divisor;
-}
-
-static struct clk s3c2440_clk_fclk_n = {
- .name = "fclk_n",
- .parent = &clk_f,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2440_fclk_n_getrate,
- },
-};
-
-static struct clk_lookup s3c2440_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
- CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
- CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
- CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
- CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
-};
-
-static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
-{
- struct clk *clock_upll;
- struct clk *clock_h;
- struct clk *clock_p;
-
- clock_p = clk_get(NULL, "pclk");
- clock_h = clk_get(NULL, "hclk");
- clock_upll = clk_get(NULL, "upll");
-
- if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
- printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
- return -EINVAL;
- }
-
- s3c2440_clk_cam.parent = clock_h;
- s3c2440_clk_ac97.parent = clock_p;
- s3c2440_clk_cam_upll.parent = clock_upll;
- s3c24xx_register_clock(&s3c2440_clk_fclk_n);
-
- s3c24xx_register_clock(&s3c2440_clk_ac97);
- s3c24xx_register_clock(&s3c2440_clk_cam);
- s3c24xx_register_clock(&s3c2440_clk_cam_upll);
- clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
-
- clk_disable(&s3c2440_clk_ac97);
- clk_disable(&s3c2440_clk_cam);
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
- .name = "s3c2440_clk",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_clk_add,
-};
-
-static __init int s3c24xx_clk_init(void)
-{
- return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c24xx_clk_init);
+++ /dev/null
-/* linux/arch/arm/mach-s3c2443/clock.c
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2443 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-/* clock selections */
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[16] = {
- [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1,
- [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2,
- [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3,
- [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4,
- [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6,
- [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8,
- [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12,
- [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16,
-};
-
-/* hsspi
- *
- * high-speed spi clock, sourced from esysclk
-*/
-
-static struct clksrc_clk clk_hsspi = {
- .clk = {
- .name = "hsspi-if",
- .parent = &clk_esysclk.clk,
- .ctrlbit = S3C2443_SCLKCON_HSSPICLK,
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-
-/* clk_hsmcc_div
- *
- * this clock is sourced from epll, and is fed through a divider,
- * to a mux controlled by sclkcon where either it or a extclk can
- * be fed to the hsmmc block
-*/
-
-static struct clksrc_clk clk_hsmmc_div = {
- .clk = {
- .name = "hsmmc-div",
- .devname = "s3c-sdhci.1",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
-};
-
-static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
-
- clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
- S3C2443_SCLKCON_HSMMCCLK_EPLL);
-
- if (parent == &clk_epll)
- clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
- else if (parent == &clk_ext)
- clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
- else
- return -EINVAL;
-
- if (clk->usage > 0) {
- __raw_writel(clksrc, S3C2443_SCLKCON);
- }
-
- clk->parent = parent;
- return 0;
-}
-
-static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
-{
- return s3c2443_setparent_hsmmc(clk, clk->parent);
-}
-
-static struct clk clk_hsmmc = {
- .name = "hsmmc-if",
- .devname = "s3c-sdhci.1",
- .parent = &clk_hsmmc_div.clk,
- .enable = s3c2443_enable_hsmmc,
- .ops = &(struct clk_ops) {
- .set_parent = s3c2443_setparent_hsmmc,
- },
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
- {
- .name = "sdi",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_SDI,
- }, {
- .name = "spi",
- .devname = "s3c2410-spi.0",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_SPI1,
- }
-};
-
-/* clocks to add straight away */
-
-static struct clksrc_clk *clksrcs[] __initdata = {
- &clk_hsspi,
- &clk_hsmmc_div,
-};
-
-static struct clk *clks[] __initdata = {
- &clk_hsmmc,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
- CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk),
-};
-
-void __init s3c2443_init_clocks(int xtal)
-{
- unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
- int ptr;
-
- clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
- clk_epll.parent = &clk_epllref.clk;
-
- s3c2443_common_init_clocks(xtal, s3c2443_get_mpll,
- armdiv, ARRAY_SIZE(armdiv),
- S3C2443_CLKDIV0_ARMDIV_MASK);
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_register_clksrc(clksrcs[ptr], 1);
-
- /* We must be careful disabling the clocks we are not intending to
- * be using at boot time, as subsystems such as the LCD which do
- * their own DMA requests to the bus can cause the system to lockup
- * if they where in the middle of requesting bus access.
- *
- * Disabling the LCD clock if the LCD is active is very dangerous,
- * and therefore the bootloader should be careful to not enable
- * the LCD clock if it is not needed.
- */
-
- /* install (and disable) the clocks we do not need immediately */
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-}
+++ /dev/null
-/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440/S3C2442 Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
-{
- unsigned long camdivn;
- unsigned long dvs;
-
- if (parent == &clk_f)
- dvs = 0;
- else if (parent == &clk_h)
- dvs = S3C2440_CAMDIVN_DVSEN;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- camdivn = __raw_readl(S3C2440_CAMDIVN);
- camdivn &= ~S3C2440_CAMDIVN_DVSEN;
- camdivn |= dvs;
- __raw_writel(camdivn, S3C2440_CAMDIVN);
-
- return 0;
-}
-
-static struct clk clk_arm = {
- .name = "armclk",
- .id = -1,
- .ops = &(struct clk_ops) {
- .set_parent = s3c2440_setparent_armclk,
- },
-};
-
-static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
- unsigned long clkdivn;
- struct clk *clock_upll;
- int ret;
-
- printk("S3C244X: Clock Support, DVS %s\n",
- (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
-
- clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
-
- ret = s3c24xx_register_clock(&clk_arm);
- if (ret < 0) {
- printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
- return ret;
- }
-
- clock_upll = clk_get(NULL, "upll");
- if (IS_ERR(clock_upll)) {
- printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
- return -ENOENT;
- }
-
- /* check rate of UPLL, and if it is near 96MHz, then change
- * to using half the UPLL rate for the system */
-
- if (clk_get_rate(clock_upll) > (94 * MHZ)) {
- clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
- spin_lock(&clocks_lock);
-
- clkdivn = __raw_readl(S3C2410_CLKDIVN);
- clkdivn |= S3C2440_CLKDIVN_UCLK;
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
-
- spin_unlock(&clocks_lock);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
- .name = "s3c2440_clk",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c244x_clk_add,
-};
-
-static int s3c2440_clk_init(void)
-{
- return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c2440_clk_init);
-
-static struct subsys_interface s3c2442_clk_interface = {
- .name = "s3c2442_clk",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c244x_clk_add,
-};
-
-static int s3c2442_clk_init(void)
-{
- return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
+++ /dev/null
-/*
- * Common code for SoCs starting with the S3C2443
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-
-
-static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
-{
- u32 ctrlbit = clk->ctrlbit;
- u32 con = __raw_readl(reg);
-
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
-
- __raw_writel(con, reg);
- return 0;
-}
-
-int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
-{
- return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
-{
- return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
-{
- return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
-}
-
-/* mpllref is a direct descendant of clk_xtal by default, but it is not
- * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
- * such directly equating the two source clocks is impossible.
- */
-static struct clk clk_mpllref = {
- .name = "mpllref",
- .parent = &clk_xtal,
-};
-
-static struct clk *clk_epllref_sources[] = {
- [0] = &clk_mpllref,
- [1] = &clk_mpllref,
- [2] = &clk_xtal,
- [3] = &clk_ext,
-};
-
-struct clksrc_clk clk_epllref = {
- .clk = {
- .name = "epllref",
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_epllref_sources,
- .nr_sources = ARRAY_SIZE(clk_epllref_sources),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
-};
-
-/* esysclk
- *
- * this is sourced from either the EPLL or the EPLLref clock
-*/
-
-static struct clk *clk_sysclk_sources[] = {
- [0] = &clk_epllref.clk,
- [1] = &clk_epll,
-};
-
-struct clksrc_clk clk_esysclk = {
- .clk = {
- .name = "esysclk",
- .parent = &clk_epll,
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_sysclk_sources,
- .nr_sources = ARRAY_SIZE(clk_sysclk_sources),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
-};
-
-static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV0);
-
- div &= S3C2443_CLKDIV0_EXTDIV_MASK;
- div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */
-
- return parent_rate / (div + 1);
-}
-
-static struct clk clk_mdivclk = {
- .name = "mdivclk",
- .parent = &clk_mpllref,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_getrate_mdivclk,
- },
-};
-
-static struct clk *clk_msysclk_sources[] = {
- [0] = &clk_mpllref,
- [1] = &clk_mpll,
- [2] = &clk_mdivclk,
- [3] = &clk_mpllref,
-};
-
-static struct clksrc_clk clk_msysclk = {
- .clk = {
- .name = "msysclk",
- .parent = &clk_xtal,
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_msysclk_sources,
- .nr_sources = ARRAY_SIZE(clk_msysclk_sources),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
-};
-
-/* prediv
- *
- * this divides the msysclk down to pass to h/p/etc.
- */
-
-static unsigned long s3c2443_prediv_getrate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
- clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
- clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
-
- return rate / (clkdiv0 + 1);
-}
-
-static struct clk clk_prediv = {
- .name = "prediv",
- .parent = &clk_msysclk.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_prediv_getrate,
- },
-};
-
-/* hclk divider
- *
- * divides the prediv and provides the hclk.
- */
-
-static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
- clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
-
- return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_h_ops = {
- .get_rate = s3c2443_hclkdiv_getrate,
-};
-
-/* pclk divider
- *
- * divides the hclk and provides the pclk.
- */
-
-static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
- clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0);
-
- return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_p_ops = {
- .get_rate = s3c2443_pclkdiv_getrate,
-};
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
-*/
-
-static unsigned int *armdiv;
-static int nr_armdiv;
-static int armdivmask;
-
-static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- unsigned long calc;
- unsigned best = 256; /* bigger than any value */
- unsigned div;
- int ptr;
-
- if (!nr_armdiv)
- return -EINVAL;
-
- for (ptr = 0; ptr < nr_armdiv; ptr++) {
- div = armdiv[ptr];
- if (div) {
- /* cpufreq provides 266mhz as 266666000 not 266666666 */
- calc = (parent / div / 1000) * 1000;
- if (calc <= rate && div < best)
- best = div;
- }
- }
-
- return parent / best;
-}
-
-static unsigned long s3c2443_armclk_getrate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkcon0;
- int val;
-
- if (!nr_armdiv || !armdivmask)
- return -EINVAL;
-
- clkcon0 = __raw_readl(S3C2443_CLKDIV0);
- clkcon0 &= armdivmask;
- val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
-
- return rate / armdiv[val];
-}
-
-static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- unsigned long calc;
- unsigned div;
- unsigned best = 256; /* bigger than any value */
- int ptr;
- int val = -1;
-
- if (!nr_armdiv || !armdivmask)
- return -EINVAL;
-
- for (ptr = 0; ptr < nr_armdiv; ptr++) {
- div = armdiv[ptr];
- if (div) {
- /* cpufreq provides 266mhz as 266666000 not 266666666 */
- calc = (parent / div / 1000) * 1000;
- if (calc <= rate && div < best) {
- best = div;
- val = ptr;
- }
- }
- }
-
- if (val >= 0) {
- unsigned long clkcon0;
-
- clkcon0 = __raw_readl(S3C2443_CLKDIV0);
- clkcon0 &= ~armdivmask;
- clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
- __raw_writel(clkcon0, S3C2443_CLKDIV0);
- }
-
- return (val == -1) ? -EINVAL : 0;
-}
-
-static struct clk clk_armdiv = {
- .name = "armdiv",
- .parent = &clk_msysclk.clk,
- .ops = &(struct clk_ops) {
- .round_rate = s3c2443_armclk_roundrate,
- .get_rate = s3c2443_armclk_getrate,
- .set_rate = s3c2443_armclk_setrate,
- },
-};
-
-/* armclk
- *
- * this is the clock fed into the ARM core itself, from armdiv or from hclk.
- */
-
-static struct clk *clk_arm_sources[] = {
- [0] = &clk_armdiv,
- [1] = &clk_h,
-};
-
-static struct clksrc_clk clk_arm = {
- .clk = {
- .name = "armclk",
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_arm_sources,
- .nr_sources = ARRAY_SIZE(clk_arm_sources),
- },
- .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
-};
-
-/* usbhost
- *
- * usb host bus-clock, usually 48MHz to provide USB bus clock timing
-*/
-
-static struct clksrc_clk clk_usb_bus_host = {
- .clk = {
- .name = "usb-bus-host-parent",
- .parent = &clk_esysclk.clk,
- .ctrlbit = S3C2443_SCLKCON_USBHOST,
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-/* common clksrc clocks */
-
-static struct clksrc_clk clksrc_clks[] = {
- {
- /* camera interface bus-clock, divided down from esysclk */
- .clk = {
- .name = "camif-upll", /* same as 2440 name */
- .parent = &clk_esysclk.clk,
- .ctrlbit = S3C2443_SCLKCON_CAMCLK,
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
- }, {
- .clk = {
- .name = "display-if",
- .parent = &clk_esysclk.clk,
- .ctrlbit = S3C2443_SCLKCON_DISPCLK,
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
- },
-};
-
-static struct clksrc_clk clk_esys_uart = {
- /* ART baud-rate clock sourced from esysclk via a divisor */
- .clk = {
- .name = "uartclk",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
-};
-
-static struct clk clk_i2s_ext = {
- .name = "i2s-ext",
-};
-
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
- .clk = {
- .name = "i2s-eplldiv",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-static struct clk *clk_i2s_srclist[] = {
- [0] = &clk_i2s_eplldiv.clk,
- [1] = &clk_i2s_ext,
- [2] = &clk_epllref.clk,
- [3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
- .clk = {
- .name = "i2s-if",
- .ctrlbit = S3C2443_SCLKCON_I2SCLK,
- .enable = s3c2443_clkcon_enable_s,
-
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_i2s_srclist,
- .nr_sources = ARRAY_SIZE(clk_i2s_srclist),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
-static struct clk init_clocks_off[] = {
- {
- .name = "iis",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_IIS,
- }, {
- .name = "adc",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_ADC,
- }, {
- .name = "i2c",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_IIC,
- }
-};
-
-static struct clk init_clocks[] = {
- {
- .name = "dma.0",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA0,
- }, {
- .name = "dma.1",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA1,
- }, {
- .name = "dma.2",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA2,
- }, {
- .name = "dma.3",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA3,
- }, {
- .name = "dma.4",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA4,
- }, {
- .name = "dma.5",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA5,
- }, {
- .name = "gpio",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_GPIO,
- }, {
- .name = "usb-host",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_USBH,
- }, {
- .name = "usb-device",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_USBD,
- }, {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_LCDC,
-
- }, {
- .name = "timers",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_PWMT,
- }, {
- .name = "cfc",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_CFC,
- }, {
- .name = "ssmc",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_SSMC,
- }, {
- .name = "uart",
- .devname = "s3c2440-uart.0",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART0,
- }, {
- .name = "uart",
- .devname = "s3c2440-uart.1",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART1,
- }, {
- .name = "uart",
- .devname = "s3c2440-uart.2",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART2,
- }, {
- .name = "uart",
- .devname = "s3c2440-uart.3",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART3,
- }, {
- .name = "rtc",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_RTC,
- }, {
- .name = "watchdog",
- .parent = &clk_p,
- .ctrlbit = S3C2443_PCLKCON_WDT,
- }, {
- .name = "ac97",
- .parent = &clk_p,
- .ctrlbit = S3C2443_PCLKCON_AC97,
- }, {
- .name = "nand",
- .parent = &clk_h,
- }, {
- .name = "usb-bus-host",
- .parent = &clk_usb_bus_host.clk,
- }
-};
-
-static struct clk hsmmc1_clk = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_HSMMC,
-};
-
-static struct clk hsspi_clk = {
- .name = "spi",
- .devname = "s3c2443-spi.0",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_HSSPI,
-};
-
-/* EPLLCON compatible enough to get on/off information */
-
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
-{
- unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
- unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
- struct clk *xtal_clk;
- unsigned long xtal;
- unsigned long pll;
- int ptr;
-
- xtal_clk = clk_get(NULL, "xtal");
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- pll = get_mpll(mpllcon, xtal);
- clk_msysclk.clk.rate = pll;
- clk_mpll.rate = pll;
-
- printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
- (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
- print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)),
- print_mhz(clk_get_rate(&clk_h)),
- print_mhz(clk_get_rate(&clk_p)));
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
- s3c_set_clksrc(&clksrc_clks[ptr], true);
-
- /* ensure usb bus clock is within correct rate of 48MHz */
-
- if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
- printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
- clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
- }
-
- printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
- (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
- print_mhz(clk_get_rate(&clk_epll)),
- print_mhz(clk_get_rate(&clk_usb_bus)));
-}
-
-static struct clk *clks[] __initdata = {
- &clk_prediv,
- &clk_mpllref,
- &clk_mdivclk,
- &clk_ext,
- &clk_epll,
- &clk_usb_bus,
- &clk_armdiv,
- &hsmmc1_clk,
- &hsspi_clk,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
- &clk_i2s_eplldiv,
- &clk_i2s,
- &clk_usb_bus_host,
- &clk_epllref,
- &clk_esysclk,
- &clk_msysclk,
- &clk_arm,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
- CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk),
-};
-
-void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
- unsigned int *divs, int nr_divs,
- int divmask)
-{
- int ptr;
-
- armdiv = divs;
- nr_armdiv = nr_divs;
- armdivmask = divmask;
-
- /* s3c2443 parents h clock from prediv */
- clk_h.parent = &clk_prediv;
- clk_h.ops = &clk_h_ops;
-
- /* and p clock from h clock */
- clk_p.parent = &clk_h;
- clk_p.ops = &clk_p_ops;
-
- clk_usb_bus.parent = &clk_usb_bus_host.clk;
- clk_epll.parent = &clk_epllref.clk;
-
- s3c24xx_register_baseclocks(xtal);
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_register_clksrc(clksrcs[ptr], 1);
-
- s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
- /* See s3c2443/etc notes on disabling clocks at init time */
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-
- s3c2443_common_setup_clocks(get_mpll);
-}
#include <plat/cpu-freq.h>
#include <plat/pll.h>
#include <plat/pwm-core.h>
+#include <plat/watchdog-reset.h>
#include "common.h"
.idcode = 0x32410000,
.idmask = 0xffffffff,
.map_io = s3c2410_map_io,
- .init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
.init = s3c2410_init,
.name = name_s3c2410
.idcode = 0x32410002,
.idmask = 0xffffffff,
.map_io = s3c2410_map_io,
- .init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
.init = s3c2410a_init,
.name = name_s3c2410a
.idcode = 0x32440000,
.idmask = 0xffffffff,
.map_io = s3c2440_map_io,
- .init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440
.idcode = 0x32440001,
.idmask = 0xffffffff,
.map_io = s3c2440_map_io,
- .init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440a
.idcode = 0x32440aaa,
.idmask = 0xffffffff,
.map_io = s3c2442_map_io,
- .init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
.name = name_s3c2442
.idcode = 0x32440aab,
.idmask = 0xffffffff,
.map_io = s3c2442_map_io,
- .init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
.name = name_s3c2442b
.idcode = 0x32412001,
.idmask = 0xffffffff,
.map_io = s3c2412_map_io,
- .init_clocks = s3c2412_init_clocks,
.init_uarts = s3c2412_init_uarts,
.init = s3c2412_init,
.name = name_s3c2412,
.idcode = 0x32412003,
.idmask = 0xffffffff,
.map_io = s3c2412_map_io,
- .init_clocks = s3c2412_init_clocks,
.init_uarts = s3c2412_init_uarts,
.init = s3c2412_init,
.name = name_s3c2412,
.idcode = 0x32450003,
.idmask = 0xffffffff,
.map_io = s3c2416_map_io,
- .init_clocks = s3c2416_init_clocks,
.init_uarts = s3c2416_init_uarts,
.init = s3c2416_init,
.name = name_s3c2416,
.idcode = 0x32443001,
.idmask = 0xffffffff,
.map_io = s3c2443_map_io,
- .init_clocks = s3c2443_init_clocks,
.init_uarts = s3c2443_init_uarts,
.init = s3c2443_init,
.name = name_s3c2443,
},
};
-/* initialise all the clocks */
-
-void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
- unsigned long hclk,
- unsigned long pclk)
-{
- clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
- clk_xtal.rate);
-
- clk_mpll.rate = fclk;
- clk_h.rate = hclk;
- clk_p.rate = pclk;
- clk_f.rate = fclk;
-}
-
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
static struct resource s3c2410_dma_resource[] = {
},
};
#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410)
+void __init s3c2410_init_clocks(int xtal)
+{
+ s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+ samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+void __init s3c2412_init_clocks(int xtal)
+{
+ s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+void __init s3c2416_init_clocks(int xtal)
+{
+ s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440)
+void __init s3c2440_init_clocks(int xtal)
+{
+ s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+ samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442)
+void __init s3c2442_init_clocks(int xtal)
+{
+ s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR);
+ samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+void __init s3c2443_init_clocks(int xtal)
+{
+ s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \
+ defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dclk_resource[] = {
+ [0] = DEFINE_RES_MEM(0x56000084, 0x4),
+};
+
+struct platform_device s3c2410_device_dclk = {
+ .name = "s3c2410-dclk",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c2410_dclk_resource),
+ .resource = s3c2410_dclk_resource,
+};
+#endif
#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
extern void s3c244x_map_io(void);
extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c244x_init_clocks(int xtal);
extern void s3c244x_restart(enum reboot_mode mode, const char *cmd);
#else
-#define s3c244x_init_clocks NULL
#define s3c244x_init_uarts NULL
#endif
#ifdef CONFIG_CPU_S3C2440
extern int s3c2440_init(void);
extern void s3c2440_map_io(void);
+extern void s3c2440_init_clocks(int xtal);
extern void s3c2440_init_irq(void);
#else
#define s3c2440_init NULL
#ifdef CONFIG_CPU_S3C2442
extern int s3c2442_init(void);
extern void s3c2442_map_io(void);
+extern void s3c2442_init_clocks(int xtal);
extern void s3c2442_init_irq(void);
#else
#define s3c2442_init NULL
extern struct platform_device s3c2440_device_dma;
extern struct platform_device s3c2443_device_dma;
+extern struct platform_device s3c2410_device_dclk;
+
+#ifdef CONFIG_S3C2410_COMMON_CLK
+void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
+ int current_soc,
+ void __iomem *reg_base);
+#endif
+#ifdef CONFIG_S3C2412_COMMON_CLK
+void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
+ unsigned long ext_f, void __iomem *reg_base);
+#endif
+#ifdef CONFIG_S3C2443_COMMON_CLK
+void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
+ int current_soc,
+ void __iomem *reg_base);
+#endif
+
#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
#include <linux/errno.h>
#include <linux/cpufreq.h>
#include <linux/io.h>
+#include <linux/clk.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
*/
void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
{
- __raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON);
+ if (!IS_ERR(cfg->mpll))
+ clk_set_rate(cfg->mpll, cfg->pll.frequency);
}
#define S3C2410_CLKCON_IIS (1<<17)
#define S3C2410_CLKCON_SPI (1<<18)
-/* DCLKCON register addresses in gpio.h */
-
-#define S3C2410_DCLKCON_DCLK0EN (1<<0)
-#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1)
-#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1)
-#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
-#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
-
-#define S3C2410_DCLKCON_DCLK1EN (1<<16)
-#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17)
-#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17)
-#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
-#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
-
#define S3C2410_CLKDIVN_PDIVN (1<<0)
#define S3C2410_CLKDIVN_HDIVN (1<<1)
/* miscellaneous control */
#define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
-#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84)
-
-#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84)
/* see clock.h for dclk definitions */
static void __init amlm5900_map_io(void)
{
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init amlm5900_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
#ifdef CONFIG_FB_S3C2410
static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
.width = 160,
.map_io = amlm5900_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = amlm5900_init,
- .init_time = samsung_timer_init,
+ .init_time = amlm5900_init_time,
.restart = s3c2410_restart,
MACHINE_END
#include <net/ax88796.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
/* Standard Anubis devices */
static struct platform_device *anubis_devices[] __initdata = {
+ &s3c2410_device_dclk,
&s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_adc,
&anubis_device_sm501,
};
-static struct clk *anubis_clocks[] __initdata = {
- &s3c24xx_dclk0,
- &s3c24xx_dclk1,
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
- &s3c24xx_uclk,
-};
-
/* I2C devices. */
static struct i2c_board_info anubis_i2c_devs[] __initdata = {
static void __init anubis_map_io(void)
{
- /* initialise the clocks */
-
- s3c24xx_dclk0.parent = &clk_upll;
- s3c24xx_dclk0.rate = 12*1000*1000;
-
- s3c24xx_dclk1.parent = &clk_upll;
- s3c24xx_dclk1.rate = 24*1000*1000;
-
- s3c24xx_clkout0.parent = &s3c24xx_dclk0;
- s3c24xx_clkout1.parent = &s3c24xx_dclk1;
-
- s3c24xx_uclk.parent = &s3c24xx_clkout1;
-
- s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
-
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
}
+static void __init anubis_init_time(void)
+{
+ s3c2440_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init anubis_init(void)
{
s3c_i2c0_set_platdata(NULL);
.map_io = anubis_map_io,
.init_machine = anubis_init,
.init_irq = s3c2440_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = anubis_init_time,
.restart = s3c244x_restart,
MACHINE_END
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/mmc-s3cmci.h>
static void __init at2440evb_map_io(void)
{
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
- s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init at2440evb_init_time(void)
+{
+ s3c2440_init_clocks(16934400);
+ samsung_timer_init();
+}
+
static void __init at2440evb_init(void)
{
s3c24xx_fb_set_platdata(&at2440evb_fb_info);
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
.init_irq = s3c2440_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = at2440evb_init_time,
.restart = s3c244x_restart,
MACHINE_END
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
#include <plat/devs.h>
// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
static struct platform_device *bast_devices[] __initdata = {
+ &s3c2410_device_dclk,
&s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&bast_sio,
};
-static struct clk *bast_clocks[] __initdata = {
- &s3c24xx_dclk0,
- &s3c24xx_dclk1,
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
- &s3c24xx_uclk,
-};
-
static struct s3c_cpufreq_board __initdata bast_cpufreq = {
.refresh = 7800, /* 7.8usec */
.auto_io = 1,
static void __init bast_map_io(void)
{
- /* initialise the clocks */
-
- s3c24xx_dclk0.parent = &clk_upll;
- s3c24xx_dclk0.rate = 12*1000*1000;
-
- s3c24xx_dclk1.parent = &clk_upll;
- s3c24xx_dclk1.rate = 24*1000*1000;
-
- s3c24xx_clkout0.parent = &s3c24xx_dclk0;
- s3c24xx_clkout1.parent = &s3c24xx_dclk1;
-
- s3c24xx_uclk.parent = &s3c24xx_clkout1;
-
- s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
-
s3c_hwmon_set_platdata(&bast_hwmon_info);
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init bast_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init bast_init(void)
{
register_syscore_ops(&bast_pm_syscore_ops);
.map_io = bast_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = bast_init,
- .init_time = samsung_timer_init,
+ .init_time = bast_init_time,
.restart = s3c2410_restart,
MACHINE_END
static void __init gta02_map_io(void)
{
s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
regulator_has_full_constraints();
}
+static void __init gta02_init_time(void)
+{
+ s3c2442_init_clocks(12000000);
+ samsung_timer_init();
+}
MACHINE_START(NEO1973_GTA02, "GTA02")
/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
.map_io = gta02_map_io,
.init_irq = s3c2442_init_irq,
.init_machine = gta02_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = gta02_init_time,
.restart = s3c244x_restart,
MACHINE_END
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
static void __init h1940_map_io(void)
{
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
}
+static void __init h1940_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
/* H1940 and RX3715 need to reserve this for suspend */
static void __init h1940_reserve(void)
{
.reserve = h1940_reserve,
.init_irq = s3c2410_init_irq,
.init_machine = h1940_init,
- .init_time = samsung_timer_init,
+ .init_time = h1940_init_time,
.restart = s3c2410_restart,
MACHINE_END
static void __init jive_map_io(void)
{
s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init jive_init_time(void)
+{
+ s3c2412_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void jive_power_off(void)
{
printk(KERN_INFO "powering system down...\n");
.init_irq = s3c2412_init_irq,
.map_io = jive_map_io,
.init_machine = jive_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = jive_init_time,
.restart = s3c2412_restart,
MACHINE_END
#include <linux/mtd/partitions.h>
#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
static void __init mini2440_map_io(void)
{
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init mini2440_init_time(void)
+{
+ s3c2440_init_clocks(12000000);
+ samsung_timer_init();
+}
+
/*
* mini2440_features string
*
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
.init_irq = s3c2440_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = mini2440_init_time,
.restart = s3c244x_restart,
MACHINE_END
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <linux/platform_data/mmc-s3cmci.h>
{
s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
n30_hwinit();
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init n30_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
/* GPB3 is the line that controls the pull-up for the USB D+ line */
static void __init n30_init(void)
Ben Dooks <ben-linux@fluff.org>
*/
.atag_offset = 0x100,
- .init_time = samsung_timer_init,
+ .init_time = n30_init_time,
.init_machine = n30_init,
.init_irq = s3c2410_init_irq,
.map_io = n30_map_io,
/* Maintainer: Christer Weinigel <christer@weinigel.se>
*/
.atag_offset = 0x100,
- .init_time = samsung_timer_init,
+ .init_time = n30_init_time,
.init_machine = n30_init,
.init_irq = s3c2410_init_irq,
.map_io = n30_map_io,
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
static void __init nexcoder_map_io(void)
{
s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
nexcoder_sensorboard_init();
}
+static void __init nexcoder_init_time(void)
+{
+ s3c2440_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init nexcoder_init(void)
{
s3c_i2c0_set_platdata(NULL);
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
.init_irq = s3c2440_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = nexcoder_init_time,
.restart = s3c244x_restart,
MACHINE_END
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
#include <plat/devs.h>
/* Standard Osiris devices */
static struct platform_device *osiris_devices[] __initdata = {
+ &s3c2410_device_dclk,
&s3c_device_i2c0,
&s3c_device_wdt,
&s3c_device_nand,
&osiris_pcmcia,
};
-static struct clk *osiris_clocks[] __initdata = {
- &s3c24xx_dclk0,
- &s3c24xx_dclk1,
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
- &s3c24xx_uclk,
-};
-
static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
.refresh = 7800, /* refresh period is 7.8usec */
.auto_io = 1,
{
unsigned long flags;
- /* initialise the clocks */
-
- s3c24xx_dclk0.parent = &clk_upll;
- s3c24xx_dclk0.rate = 12*1000*1000;
-
- s3c24xx_dclk1.parent = &clk_upll;
- s3c24xx_dclk1.rate = 24*1000*1000;
-
- s3c24xx_clkout0.parent = &s3c24xx_dclk0;
- s3c24xx_clkout1.parent = &s3c24xx_dclk1;
-
- s3c24xx_uclk.parent = &s3c24xx_clkout1;
-
- s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
-
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
local_irq_restore(flags);
}
+static void __init osiris_init_time(void)
+{
+ s3c2440_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init osiris_init(void)
{
register_syscore_ops(&osiris_pm_syscore_ops);
.map_io = osiris_map_io,
.init_irq = s3c2440_init_irq,
.init_machine = osiris_init,
- .init_time = samsung_timer_init,
+ .init_time = osiris_init_time,
.restart = s3c244x_restart,
MACHINE_END
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/samsung-time.h>
static void __init otom11_map_io(void)
{
s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init otom11_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init otom11_init(void)
{
s3c_i2c0_set_platdata(NULL);
.map_io = otom11_map_io,
.init_machine = otom11_init,
.init_irq = s3c2410_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = otom11_init_time,
.restart = s3c2410_restart,
MACHINE_END
static void __init qt2410_map_io(void)
{
s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
- s3c24xx_init_clocks(12*1000*1000);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init qt2410_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init qt2410_machine_init(void)
{
s3c_nand_set_platdata(&qt2410_nand_info);
.map_io = qt2410_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = qt2410_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = qt2410_init_time,
.restart = s3c2410_restart,
MACHINE_END
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
};
static struct platform_device *rx1950_devices[] __initdata = {
+ &s3c2410_device_dclk,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
&rx1950_leds,
};
-static struct clk *rx1950_clocks[] __initdata = {
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
-};
-
static void __init rx1950_map_io(void)
{
- s3c24xx_clkout0.parent = &clk_h;
- s3c24xx_clkout1.parent = &clk_f;
-
- s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
-
s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
- s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
s3c_pm_init();
}
+static void __init rx1950_init_time(void)
+{
+ s3c2442_init_clocks(16934000);
+ samsung_timer_init();
+}
+
static void __init rx1950_init_machine(void)
{
int i;
.reserve = rx1950_reserve,
.init_irq = s3c2442_init_irq,
.init_machine = rx1950_init_machine,
- .init_time = samsung_timer_init,
+ .init_time = rx1950_init_time,
.restart = s3c244x_restart,
MACHINE_END
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
static void __init rx3715_map_io(void)
{
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
- s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init rx3715_init_time(void)
+{
+ s3c2440_init_clocks(16934000);
+ samsung_timer_init();
+}
+
/* H1940 and RX3715 need to reserve this for suspend */
static void __init rx3715_reserve(void)
{
.reserve = rx3715_reserve,
.init_irq = s3c2440_init_irq,
.init_machine = rx3715_init_machine,
- .init_time = samsung_timer_init,
+ .init_time = rx3715_init_time,
.restart = s3c244x_restart,
MACHINE_END
#include <linux/clocksource.h>
#include <linux/irqchip.h>
#include <linux/of_platform.h>
-#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <asm/mach/arch.h>
#include "common.h"
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the S3C2416 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART,
- "s3c2440-uart.0", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000,
- "s3c2440-uart.1", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000,
- "s3c2440-uart.2", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000,
- "s3c2440-uart.3", NULL),
- OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0,
- "s3c-sdhci.0", NULL),
- OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1,
- "s3c-sdhci.1", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC,
- "s3c2440-i2c.0", NULL),
- {},
-};
-
static void __init s3c2416_dt_map_io(void)
{
s3c24xx_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
}
static void __init s3c2416_dt_machine_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- s3c2416_auxdata_lookup, NULL);
-
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
s3c_pm_init();
}
.map_io = s3c2416_dt_map_io,
.init_irq = irqchip_init,
.init_machine = s3c2416_dt_machine_init,
- .init_time = clocksource_of_init,
.restart = s3c2416_restart,
MACHINE_END
static void __init smdk2410_map_io(void)
{
s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init smdk2410_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init smdk2410_init(void)
{
s3c_i2c0_set_platdata(NULL);
.map_io = smdk2410_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = smdk2410_init,
- .init_time = samsung_timer_init,
+ .init_time = smdk2410_init_time,
.restart = s3c2410_restart,
MACHINE_END
static void __init smdk2413_map_io(void)
{
s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init smdk2413_init_time(void)
+{
+ s3c2412_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init smdk2413_machine_init(void)
{ /* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
.init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = smdk2413_init_time,
.restart = s3c2412_restart,
MACHINE_END
&s3c2443_device_dma,
};
+static void __init smdk2416_init_time(void)
+{
+ s3c2416_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init smdk2416_map_io(void)
{
s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
.init_irq = s3c2416_init_irq,
.map_io = smdk2416_map_io,
.init_machine = smdk2416_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = smdk2416_init_time,
.restart = s3c2416_restart,
MACHINE_END
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/samsung-time.h>
static void __init smdk2440_map_io(void)
{
s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
- s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init smdk2440_init_time(void)
+{
+ s3c2440_init_clocks(16934400);
+ samsung_timer_init();
+}
+
static void __init smdk2440_machine_init(void)
{
s3c24xx_fb_set_platdata(&smdk2440_fb_info);
.init_irq = s3c2440_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = smdk2440_init_time,
.restart = s3c244x_restart,
MACHINE_END
static void __init smdk2443_map_io(void)
{
s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init smdk2443_init_time(void)
+{
+ s3c2443_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init smdk2443_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
.init_irq = s3c2443_init_irq,
.map_io = smdk2443_map_io,
.init_machine = smdk2443_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = smdk2443_init_time,
.restart = s3c2443_restart,
MACHINE_END
static void __init tct_hammer_map_io(void)
{
s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init tct_hammer_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init tct_hammer_init(void)
{
s3c_i2c0_set_platdata(NULL);
.map_io = tct_hammer_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = tct_hammer_init,
- .init_time = samsung_timer_init,
+ .init_time = tct_hammer_init_time,
.restart = s3c2410_restart,
MACHINE_END
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/samsung-time.h>
/* devices for this board */
static struct platform_device *vr1000_devices[] __initdata = {
+ &s3c2410_device_dclk,
&s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&vr1000_led3,
};
-static struct clk *vr1000_clocks[] __initdata = {
- &s3c24xx_dclk0,
- &s3c24xx_dclk1,
- &s3c24xx_clkout0,
- &s3c24xx_clkout1,
- &s3c24xx_uclk,
-};
-
static void vr1000_power_off(void)
{
gpio_direction_output(S3C2410_GPB(9), 1);
static void __init vr1000_map_io(void)
{
- /* initialise clock sources */
-
- s3c24xx_dclk0.parent = &clk_upll;
- s3c24xx_dclk0.rate = 12*1000*1000;
-
- s3c24xx_dclk1.parent = NULL;
- s3c24xx_dclk1.rate = 3692307;
-
- s3c24xx_clkout0.parent = &s3c24xx_dclk0;
- s3c24xx_clkout1.parent = &s3c24xx_dclk1;
-
- s3c24xx_uclk.parent = &s3c24xx_clkout1;
-
- s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks));
-
pm_power_off = vr1000_power_off;
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init vr1000_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init vr1000_init(void)
{
s3c_i2c0_set_platdata(NULL);
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
.init_irq = s3c2410_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = vr1000_init_time,
.restart = s3c2410_restart,
MACHINE_END
static void __init vstms_map_io(void)
{
s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init vstms_init_time(void)
+{
+ s3c2412_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init vstms_init(void)
{
s3c_i2c0_set_platdata(NULL);
.init_irq = s3c2412_init_irq,
.init_machine = vstms_init,
.map_io = vstms_map_io,
- .init_time = samsung_timer_init,
+ .init_time = vstms_init_time,
.restart = s3c2412_restart,
MACHINE_END
#define PFX "s3c24xx-pm: "
static struct sleep_save core_save[] = {
- SAVE_ITEM(S3C2410_LOCKTIME),
- SAVE_ITEM(S3C2410_CLKCON),
-
/* we restore the timings here, with the proviso that the board
* brings the system up in an slower, or equal frequency setting
* to the original system.
SAVE_ITEM(S3C2410_BANKCON3),
SAVE_ITEM(S3C2410_BANKCON4),
SAVE_ITEM(S3C2410_BANKCON5),
-
-#ifndef CONFIG_CPU_FREQ
- SAVE_ITEM(S3C2410_CLKDIVN),
- SAVE_ITEM(S3C2410_MPLLCON),
- SAVE_ITEM(S3C2410_REFRESH),
-#endif
- SAVE_ITEM(S3C2410_UPLLCON),
- SAVE_ITEM(S3C2410_CLKSLOW),
-};
-
-static struct sleep_save misc_save[] = {
- SAVE_ITEM(S3C2410_DCLKCON),
};
/* s3c_pm_check_resume_pin
void s3c_pm_restore_core(void)
{
s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
- s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
}
void s3c_pm_save_core(void)
{
- s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
}
void __init_or_cpufreq s3c2410_setup_clocks(void)
{
- struct clk *xtal_clk;
- unsigned long tmp;
- unsigned long xtal;
- unsigned long fclk;
- unsigned long hclk;
- unsigned long pclk;
-
- xtal_clk = clk_get(NULL, "xtal");
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- /* now we've got our machine bits initialised, work out what
- * clocks we've got */
-
- fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
-
- tmp = __raw_readl(S3C2410_CLKDIVN);
-
- /* work out clock scalings */
-
- hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1);
- pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1);
-
- /* print brieft summary of clocks, etc */
-
- printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
- print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
- /* initialise the clocks here, to allow other things like the
- * console to use them
- */
-
- s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-/* fake ARMCLK for use with cpufreq, etc. */
-
-static struct clk s3c2410_armclk = {
- .name = "armclk",
- .parent = &clk_f,
- .id = -1,
-};
-
-static struct clk_lookup s3c2410_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-};
-
-void __init s3c2410_init_clocks(int xtal)
-{
- s3c24xx_register_baseclocks(xtal);
- s3c2410_setup_clocks();
- s3c2410_baseclk_add();
- s3c24xx_register_clock(&s3c2410_armclk);
- clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
- samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
}
struct bus_type s3c2410_subsys = {
void __init_or_cpufreq s3c2412_setup_clocks(void)
{
- struct clk *xtal_clk;
- unsigned long tmp;
- unsigned long xtal;
- unsigned long fclk;
- unsigned long hclk;
- unsigned long pclk;
-
- xtal_clk = clk_get(NULL, "xtal");
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- /* now we've got our machine bits initialised, work out what
- * clocks we've got */
-
- fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
-
- clk_mpll.rate = fclk;
-
- tmp = __raw_readl(S3C2410_CLKDIVN);
-
- /* work out clock scalings */
-
- hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
- hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1);
- pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
-
- /* print brieft summary of clocks, etc */
-
- printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
- print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
- s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c2412_init_clocks(int xtal)
-{
- /* initialise the clocks here, to allow other things like the
- * console to use them
- */
-
- s3c24xx_register_baseclocks(xtal);
- s3c2412_setup_clocks();
- s3c2412_baseclk_add();
}
/* need to register the subsystem before we actually register the device, and
#include "common.h"
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- div = parent_rate / rate;
-
- if (div == 3)
- return parent_rate / 3;
-
- /* note, we remove the +/- 1 calculations for the divisor */
-
- div /= 2;
-
- if (div < 1)
- div = 1;
- else if (div > 16)
- div = 16;
-
- return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-
- rate = s3c2442_camif_upll_round(clk, rate);
-
- camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
- if (rate == parent_rate) {
- camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
- } else if ((parent_rate / rate) == 3) {
- camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
- camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
- } else {
- camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
- camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
- camdivn |= (((parent_rate / rate) / 2) - 1);
- }
-
- __raw_writel(camdivn, S3C2440_CAMDIVN);
-
- return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
- .name = "camif",
- .id = -1,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
- .name = "camif-upll",
- .id = -1,
- .ops = &(struct clk_ops) {
- .set_rate = s3c2442_camif_upll_setrate,
- .round_rate = s3c2442_camif_upll_round,
- },
-};
-
-static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
-{
- struct clk *clock_upll;
- struct clk *clock_h;
- struct clk *clock_p;
-
- clock_p = clk_get(NULL, "pclk");
- clock_h = clk_get(NULL, "hclk");
- clock_upll = clk_get(NULL, "upll");
-
- if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
- printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
- return -EINVAL;
- }
-
- s3c2442_clk_cam.parent = clock_h;
- s3c2442_clk_cam_upll.parent = clock_upll;
-
- s3c24xx_register_clock(&s3c2442_clk_cam);
- s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
- clk_disable(&s3c2442_clk_cam);
-
- return 0;
-}
-
-static struct subsys_interface s3c2442_clk_interface = {
- .name = "s3c2442_clk",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
- return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
-
-
static struct device s3c2442_dev = {
.bus = &s3c2442_subsys,
};
#include <plat/nand-core.h>
#include <plat/watchdog-reset.h>
+#include "common.h"
#include "regs-dsc.h"
static struct map_desc s3c244x_iodesc[] __initdata = {
s3c_nand_setname("s3c2440-nand");
s3c_device_ts.name = "s3c2440-ts";
s3c_device_usbgadget.name = "s3c2440-usbgadget";
+ s3c2410_device_dclk.name = "s3c2440-dclk";
}
void __init_or_cpufreq s3c244x_setup_clocks(void)
{
- struct clk *xtal_clk;
- unsigned long clkdiv;
- unsigned long camdiv;
- unsigned long xtal;
- unsigned long hclk, fclk, pclk;
- int hdiv = 1;
-
- xtal_clk = clk_get(NULL, "xtal");
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
- clkdiv = __raw_readl(S3C2410_CLKDIVN);
- camdiv = __raw_readl(S3C2440_CAMDIVN);
-
- /* work out clock scalings */
-
- switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
- case S3C2440_CLKDIVN_HDIVN_1:
- hdiv = 1;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_2:
- hdiv = 2;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_4_8:
- hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_3_6:
- hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
- break;
- }
-
- hclk = fclk / hdiv;
- pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
-
- /* print brief summary of clocks, etc */
-
- printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
- print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
- s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c244x_init_clocks(int xtal)
-{
- /* initialise the clocks here, to allow other things like the
- * console to use them, and to add new ones after the initialisation
- */
-
- s3c24xx_register_baseclocks(xtal);
- s3c244x_setup_clocks();
- s3c2410_baseclk_add();
- samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
}
/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
struct s3c_cpufreq_config {
struct s3c_freq freq;
struct s3c_freq max;
+ struct clk *mpll;
struct cpufreq_frequency_table pll;
struct s3c_clkdivs divs;
struct s3c_cpufreq_info *info; /* for core, not drivers */
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/mvebu/Kconfig"
+
+source "drivers/clk/samsung/Kconfig"
obj-$(CONFIG_ARCH_MXS) += mxs/
obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
-obj-$(CONFIG_PLAT_SAMSUNG) += samsung/
+obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/
obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile/
obj-$(CONFIG_ARCH_SIRF) += sirf/
obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
--- /dev/null
+config COMMON_CLK_SAMSUNG
+ bool
+ select COMMON_CLK
+
+config S3C2410_COMMON_CLK
+ bool
+ select COMMON_CLK_SAMSUNG
+ help
+ Build the s3c2410 clock driver based on the common clock framework.
+
+config S3C2410_COMMON_DCLK
+ bool
+ select COMMON_CLK_SAMSUNG
+ select REGMAP_MMIO
+ help
+ Temporary symbol to build the dclk driver based on the common clock
+ framework.
+
+config S3C2412_COMMON_CLK
+ bool
+ select COMMON_CLK_SAMSUNG
+
+config S3C2443_COMMON_CLK
+ bool
+ select COMMON_CLK_SAMSUNG
+
#
obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o
+obj-$(CONFIG_SOC_EXYNOS3250) += clk-exynos3250.o
obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o
obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
+obj-$(CONFIG_SOC_EXYNOS5260) += clk-exynos5260.o
obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o
obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o
+obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
+obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
+obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
+obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o
obj-$(CONFIG_ARCH_S3C64XX) += clk-s3c64xx.o
--- /dev/null
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos3250 SoC.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/exynos3250.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define SRC_LEFTBUS 0x4200
+#define DIV_LEFTBUS 0x4500
+#define GATE_IP_LEFTBUS 0x4800
+#define SRC_RIGHTBUS 0x8200
+#define DIV_RIGHTBUS 0x8500
+#define GATE_IP_RIGHTBUS 0x8800
+#define GATE_IP_PERIR 0x8960
+#define MPLL_LOCK 0xc010
+#define MPLL_CON0 0xc110
+#define VPLL_LOCK 0xc020
+#define VPLL_CON0 0xc120
+#define UPLL_LOCK 0xc030
+#define UPLL_CON0 0xc130
+#define SRC_TOP0 0xc210
+#define SRC_TOP1 0xc214
+#define SRC_CAM 0xc220
+#define SRC_MFC 0xc228
+#define SRC_G3D 0xc22c
+#define SRC_LCD 0xc234
+#define SRC_ISP 0xc238
+#define SRC_FSYS 0xc240
+#define SRC_PERIL0 0xc250
+#define SRC_PERIL1 0xc254
+#define SRC_MASK_TOP 0xc310
+#define SRC_MASK_CAM 0xc320
+#define SRC_MASK_LCD 0xc334
+#define SRC_MASK_ISP 0xc338
+#define SRC_MASK_FSYS 0xc340
+#define SRC_MASK_PERIL0 0xc350
+#define SRC_MASK_PERIL1 0xc354
+#define DIV_TOP 0xc510
+#define DIV_CAM 0xc520
+#define DIV_MFC 0xc528
+#define DIV_G3D 0xc52c
+#define DIV_LCD 0xc534
+#define DIV_ISP 0xc538
+#define DIV_FSYS0 0xc540
+#define DIV_FSYS1 0xc544
+#define DIV_FSYS2 0xc548
+#define DIV_PERIL0 0xc550
+#define DIV_PERIL1 0xc554
+#define DIV_PERIL3 0xc55c
+#define DIV_PERIL4 0xc560
+#define DIV_PERIL5 0xc564
+#define DIV_CAM1 0xc568
+#define CLKDIV2_RATIO 0xc580
+#define GATE_SCLK_CAM 0xc820
+#define GATE_SCLK_MFC 0xc828
+#define GATE_SCLK_G3D 0xc82c
+#define GATE_SCLK_LCD 0xc834
+#define GATE_SCLK_ISP_TOP 0xc838
+#define GATE_SCLK_FSYS 0xc840
+#define GATE_SCLK_PERIL 0xc850
+#define GATE_IP_CAM 0xc920
+#define GATE_IP_MFC 0xc928
+#define GATE_IP_G3D 0xc92c
+#define GATE_IP_LCD 0xc934
+#define GATE_IP_ISP 0xc938
+#define GATE_IP_FSYS 0xc940
+#define GATE_IP_PERIL 0xc950
+#define GATE_BLOCK 0xc970
+#define APLL_LOCK 0x14000
+#define APLL_CON0 0x14100
+#define SRC_CPU 0x14200
+#define DIV_CPU0 0x14500
+#define DIV_CPU1 0x14504
+
+/* list of PLLs to be registered */
+enum exynos3250_plls {
+ apll, mpll, vpll, upll,
+ nr_plls
+};
+
+static void __iomem *reg_base;
+
+/*
+ * Support for CMU save/restore across system suspends
+ */
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *exynos3250_clk_regs;
+
+static unsigned long exynos3250_cmu_clk_regs[] __initdata = {
+ SRC_LEFTBUS,
+ DIV_LEFTBUS,
+ GATE_IP_LEFTBUS,
+ SRC_RIGHTBUS,
+ DIV_RIGHTBUS,
+ GATE_IP_RIGHTBUS,
+ GATE_IP_PERIR,
+ MPLL_LOCK,
+ MPLL_CON0,
+ VPLL_LOCK,
+ VPLL_CON0,
+ UPLL_LOCK,
+ UPLL_CON0,
+ SRC_TOP0,
+ SRC_TOP1,
+ SRC_CAM,
+ SRC_MFC,
+ SRC_G3D,
+ SRC_LCD,
+ SRC_ISP,
+ SRC_FSYS,
+ SRC_PERIL0,
+ SRC_PERIL1,
+ SRC_MASK_TOP,
+ SRC_MASK_CAM,
+ SRC_MASK_LCD,
+ SRC_MASK_ISP,
+ SRC_MASK_FSYS,
+ SRC_MASK_PERIL0,
+ SRC_MASK_PERIL1,
+ DIV_TOP,
+ DIV_CAM,
+ DIV_MFC,
+ DIV_G3D,
+ DIV_LCD,
+ DIV_ISP,
+ DIV_FSYS0,
+ DIV_FSYS1,
+ DIV_FSYS2,
+ DIV_PERIL0,
+ DIV_PERIL1,
+ DIV_PERIL3,
+ DIV_PERIL4,
+ DIV_PERIL5,
+ DIV_CAM1,
+ CLKDIV2_RATIO,
+ GATE_SCLK_CAM,
+ GATE_SCLK_MFC,
+ GATE_SCLK_G3D,
+ GATE_SCLK_LCD,
+ GATE_SCLK_ISP_TOP,
+ GATE_SCLK_FSYS,
+ GATE_SCLK_PERIL,
+ GATE_IP_CAM,
+ GATE_IP_MFC,
+ GATE_IP_G3D,
+ GATE_IP_LCD,
+ GATE_IP_ISP,
+ GATE_IP_FSYS,
+ GATE_IP_PERIL,
+ GATE_BLOCK,
+ APLL_LOCK,
+ SRC_CPU,
+ DIV_CPU0,
+ DIV_CPU1,
+};
+
+static int exynos3250_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, exynos3250_clk_regs,
+ ARRAY_SIZE(exynos3250_cmu_clk_regs));
+ return 0;
+}
+
+static void exynos3250_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, exynos3250_clk_regs,
+ ARRAY_SIZE(exynos3250_cmu_clk_regs));
+}
+
+static struct syscore_ops exynos3250_clk_syscore_ops = {
+ .suspend = exynos3250_clk_suspend,
+ .resume = exynos3250_clk_resume,
+};
+
+static void exynos3250_clk_sleep_init(void)
+{
+ exynos3250_clk_regs =
+ samsung_clk_alloc_reg_dump(exynos3250_cmu_clk_regs,
+ ARRAY_SIZE(exynos3250_cmu_clk_regs));
+ if (!exynos3250_clk_regs) {
+ pr_warn("%s: Failed to allocate sleep save data\n", __func__);
+ goto err;
+ }
+
+ register_syscore_ops(&exynos3250_clk_syscore_ops);
+ return;
+err:
+ kfree(exynos3250_clk_regs);
+}
+#else
+static inline void exynos3250_clk_sleep_init(void) { }
+#endif
+
+/* list of all parent clock list */
+PNAME(mout_vpllsrc_p) = { "fin_pll", };
+
+PNAME(mout_apll_p) = { "fin_pll", "fout_apll", };
+PNAME(mout_mpll_p) = { "fin_pll", "fout_mpll", };
+PNAME(mout_vpll_p) = { "fin_pll", "fout_vpll", };
+PNAME(mout_upll_p) = { "fin_pll", "fout_upll", };
+
+PNAME(mout_mpll_user_p) = { "fin_pll", "div_mpll_pre", };
+PNAME(mout_epll_user_p) = { "fin_pll", "mout_epll", };
+PNAME(mout_core_p) = { "mout_apll", "mout_mpll_user_c", };
+PNAME(mout_hpm_p) = { "mout_apll", "mout_mpll_user_c", };
+
+PNAME(mout_ebi_p) = { "div_aclk_200", "div_aclk_160", };
+PNAME(mout_ebi_1_p) = { "mout_ebi", "mout_vpll", };
+
+PNAME(mout_gdl_p) = { "mout_mpll_user_l", };
+PNAME(mout_gdr_p) = { "mout_mpll_user_r", };
+
+PNAME(mout_aclk_400_mcuisp_sub_p)
+ = { "fin_pll", "div_aclk_400_mcuisp", };
+PNAME(mout_aclk_266_0_p) = { "div_mpll_pre", "mout_vpll", };
+PNAME(mout_aclk_266_1_p) = { "mout_epll_user", };
+PNAME(mout_aclk_266_p) = { "mout_aclk_266_0", "mout_aclk_266_1", };
+PNAME(mout_aclk_266_sub_p) = { "fin_pll", "div_aclk_266", };
+
+PNAME(group_div_mpll_pre_p) = { "div_mpll_pre", };
+PNAME(group_epll_vpll_p) = { "mout_epll_user", "mout_vpll" };
+PNAME(group_sclk_p) = { "xxti", "xusbxti",
+ "none", "none",
+ "none", "none", "div_mpll_pre",
+ "mout_epll_user", "mout_vpll", };
+PNAME(group_sclk_audio_p) = { "audiocdclk", "none",
+ "none", "none",
+ "xxti", "xusbxti",
+ "div_mpll_pre", "mout_epll_user",
+ "mout_vpll", };
+PNAME(group_sclk_cam_blk_p) = { "xxti", "xusbxti",
+ "none", "none", "none",
+ "none", "div_mpll_pre",
+ "mout_epll_user", "mout_vpll",
+ "div_cam_blk_320", };
+PNAME(group_sclk_fimd0_p) = { "xxti", "xusbxti",
+ "m_bitclkhsdiv4_2l", "none",
+ "none", "none", "div_mpll_pre",
+ "mout_epll_user", "mout_vpll",
+ "none", "none", "none",
+ "div_lcd_blk_145", };
+
+PNAME(mout_mfc_p) = { "mout_mfc_0", "mout_mfc_1" };
+PNAME(mout_g3d_p) = { "mout_g3d_0", "mout_g3d_1" };
+
+static struct samsung_fixed_factor_clock fixed_factor_clks[] __initdata = {
+ FFACTOR(0, "sclk_mpll_1600", "mout_mpll", 1, 1, 0),
+ FFACTOR(0, "sclk_mpll_mif", "mout_mpll", 1, 2, 0),
+ FFACTOR(0, "sclk_bpll", "fout_bpll", 1, 2, 0),
+ FFACTOR(0, "div_cam_blk_320", "sclk_mpll_1600", 1, 5, 0),
+ FFACTOR(0, "div_lcd_blk_145", "sclk_mpll_1600", 1, 11, 0),
+
+ /* HACK: fin_pll hardcoded to xusbxti until detection is implemented. */
+ FFACTOR(CLK_FIN_PLL, "fin_pll", "xusbxti", 1, 1, 0),
+};
+
+static struct samsung_mux_clock mux_clks[] __initdata = {
+ /*
+ * NOTE: Following table is sorted by register address in ascending
+ * order and then bitfield shift in descending order, as it is done
+ * in the User's Manual. When adding new entries, please make sure
+ * that the order is preserved, to avoid merge conflicts and make
+ * further work with defined data easier.
+ */
+
+ /* SRC_LEFTBUS */
+ MUX(CLK_MOUT_MPLL_USER_L, "mout_mpll_user_l", mout_mpll_user_p,
+ SRC_LEFTBUS, 4, 1),
+ MUX(CLK_MOUT_GDL, "mout_gdl", mout_gdl_p, SRC_LEFTBUS, 0, 1),
+
+ /* SRC_RIGHTBUS */
+ MUX(CLK_MOUT_MPLL_USER_R, "mout_mpll_user_r", mout_mpll_user_p,
+ SRC_RIGHTBUS, 4, 1),
+ MUX(CLK_MOUT_GDR, "mout_gdr", mout_gdr_p, SRC_RIGHTBUS, 0, 1),
+
+ /* SRC_TOP0 */
+ MUX(CLK_MOUT_EBI, "mout_ebi", mout_ebi_p, SRC_TOP0, 28, 1),
+ MUX(CLK_MOUT_ACLK_200, "mout_aclk_200", group_div_mpll_pre_p,SRC_TOP0, 24, 1),
+ MUX(CLK_MOUT_ACLK_160, "mout_aclk_160", group_div_mpll_pre_p, SRC_TOP0, 20, 1),
+ MUX(CLK_MOUT_ACLK_100, "mout_aclk_100", group_div_mpll_pre_p, SRC_TOP0, 16, 1),
+ MUX(CLK_MOUT_ACLK_266_1, "mout_aclk_266_1", mout_aclk_266_1_p, SRC_TOP0, 14, 1),
+ MUX(CLK_MOUT_ACLK_266_0, "mout_aclk_266_0", mout_aclk_266_0_p, SRC_TOP0, 13, 1),
+ MUX(CLK_MOUT_ACLK_266, "mout_aclk_266", mout_aclk_266_p, SRC_TOP0, 12, 1),
+ MUX(CLK_MOUT_VPLL, "mout_vpll", mout_vpll_p, SRC_TOP0, 8, 1),
+ MUX(CLK_MOUT_EPLL_USER, "mout_epll_user", mout_epll_user_p, SRC_TOP0, 4, 1),
+ MUX(CLK_MOUT_EBI_1, "mout_ebi_1", mout_ebi_1_p, SRC_TOP0, 0, 1),
+
+ /* SRC_TOP1 */
+ MUX(CLK_MOUT_UPLL, "mout_upll", mout_upll_p, SRC_TOP1, 28, 1),
+ MUX(CLK_MOUT_ACLK_400_MCUISP_SUB, "mout_aclk_400_mcuisp_sub", mout_aclk_400_mcuisp_sub_p,
+ SRC_TOP1, 24, 1),
+ MUX(CLK_MOUT_ACLK_266_SUB, "mout_aclk_266_sub", mout_aclk_266_sub_p, SRC_TOP1, 20, 1),
+ MUX(CLK_MOUT_MPLL, "mout_mpll", mout_mpll_p, SRC_TOP1, 12, 1),
+ MUX(CLK_MOUT_ACLK_400_MCUISP, "mout_aclk_400_mcuisp", group_div_mpll_pre_p, SRC_TOP1, 8, 1),
+ MUX(CLK_MOUT_VPLLSRC, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP1, 0, 1),
+
+ /* SRC_CAM */
+ MUX(CLK_MOUT_CAM1, "mout_cam1", group_sclk_p, SRC_CAM, 20, 4),
+ MUX(CLK_MOUT_CAM_BLK, "mout_cam_blk", group_sclk_cam_blk_p, SRC_CAM, 0, 4),
+
+ /* SRC_MFC */
+ MUX(CLK_MOUT_MFC, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1),
+ MUX(CLK_MOUT_MFC_1, "mout_mfc_1", group_epll_vpll_p, SRC_MFC, 4, 1),
+ MUX(CLK_MOUT_MFC_0, "mout_mfc_0", group_div_mpll_pre_p, SRC_MFC, 0, 1),
+
+ /* SRC_G3D */
+ MUX(CLK_MOUT_G3D, "mout_g3d", mout_g3d_p, SRC_G3D, 8, 1),
+ MUX(CLK_MOUT_G3D_1, "mout_g3d_1", group_epll_vpll_p, SRC_G3D, 4, 1),
+ MUX(CLK_MOUT_G3D_0, "mout_g3d_0", group_div_mpll_pre_p, SRC_G3D, 0, 1),
+
+ /* SRC_LCD */
+ MUX(CLK_MOUT_MIPI0, "mout_mipi0", group_sclk_p, SRC_LCD, 12, 4),
+ MUX(CLK_MOUT_FIMD0, "mout_fimd0", group_sclk_fimd0_p, SRC_LCD, 0, 4),
+
+ /* SRC_ISP */
+ MUX(CLK_MOUT_UART_ISP, "mout_uart_isp", group_sclk_p, SRC_ISP, 12, 4),
+ MUX(CLK_MOUT_SPI1_ISP, "mout_spi1_isp", group_sclk_p, SRC_ISP, 8, 4),
+ MUX(CLK_MOUT_SPI0_ISP, "mout_spi0_isp", group_sclk_p, SRC_ISP, 4, 4),
+
+ /* SRC_FSYS */
+ MUX(CLK_MOUT_TSADC, "mout_tsadc", group_sclk_p, SRC_FSYS, 28, 4),
+ MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 3),
+ MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 3),
+
+ /* SRC_PERIL0 */
+ MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4),
+ MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),
+
+ /* SRC_PERIL1 */
+ MUX(CLK_MOUT_SPI1, "mout_spi1", group_sclk_p, SRC_PERIL1, 20, 4),
+ MUX(CLK_MOUT_SPI0, "mout_spi0", group_sclk_p, SRC_PERIL1, 16, 4),
+ MUX(CLK_MOUT_AUDIO, "mout_audio", group_sclk_audio_p, SRC_PERIL1, 4, 4),
+
+ /* SRC_CPU */
+ MUX(CLK_MOUT_MPLL_USER_C, "mout_mpll_user_c", mout_mpll_user_p,
+ SRC_CPU, 24, 1),
+ MUX(CLK_MOUT_HPM, "mout_hpm", mout_hpm_p, SRC_CPU, 20, 1),
+ MUX(CLK_MOUT_CORE, "mout_core", mout_core_p, SRC_CPU, 16, 1),
+ MUX(CLK_MOUT_APLL, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
+};
+
+static struct samsung_div_clock div_clks[] __initdata = {
+ /*
+ * NOTE: Following table is sorted by register address in ascending
+ * order and then bitfield shift in descending order, as it is done
+ * in the User's Manual. When adding new entries, please make sure
+ * that the order is preserved, to avoid merge conflicts and make
+ * further work with defined data easier.
+ */
+
+ /* DIV_LEFTBUS */
+ DIV(CLK_DIV_GPL, "div_gpl", "div_gdl", DIV_LEFTBUS, 4, 3),
+ DIV(CLK_DIV_GDL, "div_gdl", "mout_gdl", DIV_LEFTBUS, 0, 4),
+
+ /* DIV_RIGHTBUS */
+ DIV(CLK_DIV_GPR, "div_gpr", "div_gdr", DIV_RIGHTBUS, 4, 3),
+ DIV(CLK_DIV_GDR, "div_gdr", "mout_gdr", DIV_RIGHTBUS, 0, 4),
+
+ /* DIV_TOP */
+ DIV(CLK_DIV_MPLL_PRE, "div_mpll_pre", "sclk_mpll_mif", DIV_TOP, 28, 2),
+ DIV(CLK_DIV_ACLK_400_MCUISP, "div_aclk_400_mcuisp",
+ "mout_aclk_400_mcuisp", DIV_TOP, 24, 3),
+ DIV(CLK_DIV_EBI, "div_ebi", "mout_ebi_1", DIV_TOP, 16, 3),
+ DIV(CLK_DIV_ACLK_200, "div_aclk_200", "mout_aclk_200", DIV_TOP, 12, 3),
+ DIV(CLK_DIV_ACLK_160, "div_aclk_160", "mout_aclk_160", DIV_TOP, 8, 3),
+ DIV(CLK_DIV_ACLK_100, "div_aclk_100", "mout_aclk_100", DIV_TOP, 4, 4),
+ DIV(CLK_DIV_ACLK_266, "div_aclk_266", "mout_aclk_266", DIV_TOP, 0, 3),
+
+ /* DIV_CAM */
+ DIV(CLK_DIV_CAM1, "div_cam1", "mout_cam1", DIV_CAM, 20, 4),
+ DIV(CLK_DIV_CAM_BLK, "div_cam_blk", "mout_cam_blk", DIV_CAM, 0, 4),
+
+ /* DIV_MFC */
+ DIV(CLK_DIV_MFC, "div_mfc", "mout_mfc", DIV_MFC, 0, 4),
+
+ /* DIV_G3D */
+ DIV(CLK_DIV_G3D, "div_g3d", "mout_g3d", DIV_G3D, 0, 4),
+
+ /* DIV_LCD */
+ DIV_F(CLK_DIV_MIPI0_PRE, "div_mipi0_pre", "div_mipi0", DIV_LCD, 20, 4,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_MIPI0, "div_mipi0", "mout_mipi0", DIV_LCD, 16, 4),
+ DIV(CLK_DIV_FIMD0, "div_fimd0", "mout_fimd0", DIV_LCD, 0, 4),
+
+ /* DIV_ISP */
+ DIV(CLK_DIV_UART_ISP, "div_uart_isp", "mout_uart_isp", DIV_ISP, 28, 4),
+ DIV_F(CLK_DIV_SPI1_ISP_PRE, "div_spi1_isp_pre", "div_spi1_isp",
+ DIV_ISP, 20, 8, CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_SPI1_ISP, "div_spi1_isp", "mout_spi1_isp", DIV_ISP, 16, 4),
+ DIV_F(CLK_DIV_SPI0_ISP_PRE, "div_spi0_isp_pre", "div_spi0_isp",
+ DIV_ISP, 8, 8, CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_SPI0_ISP, "div_spi0_isp", "mout_spi0_isp", DIV_ISP, 0, 4),
+
+ /* DIV_FSYS0 */
+ DIV_F(CLK_DIV_TSADC_PRE, "div_tsadc_pre", "div_tsadc", DIV_FSYS0, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_TSADC, "div_tsadc", "mout_tsadc", DIV_FSYS0, 0, 4),
+
+ /* DIV_FSYS1 */
+ DIV_F(CLK_DIV_MMC1_PRE, "div_mmc1_pre", "div_mmc1", DIV_FSYS1, 24, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_MMC1, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
+ DIV_F(CLK_DIV_MMC0_PRE, "div_mmc0_pre", "div_mmc0", DIV_FSYS1, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+
+ /* DIV_PERIL0 */
+ DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
+ DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
+
+ /* DIV_PERIL1 */
+ DIV_F(CLK_DIV_SPI1_PRE, "div_spi1_pre", "div_spi1", DIV_PERIL1, 24, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_SPI1, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4),
+ DIV_F(CLK_DIV_SPI0_PRE, "div_spi0_pre", "div_spi0", DIV_PERIL1, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_SPI0, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4),
+
+ /* DIV_PERIL4 */
+ DIV(CLK_DIV_PCM, "div_pcm", "div_audio", DIV_PERIL4, 20, 8),
+ DIV(CLK_DIV_AUDIO, "div_audio", "mout_audio", DIV_PERIL4, 16, 4),
+
+ /* DIV_PERIL5 */
+ DIV(CLK_DIV_I2S, "div_i2s", "div_audio", DIV_PERIL5, 8, 6),
+
+ /* DIV_CPU0 */
+ DIV(CLK_DIV_CORE2, "div_core2", "div_core", DIV_CPU0, 28, 3),
+ DIV(CLK_DIV_APLL, "div_apll", "mout_apll", DIV_CPU0, 24, 3),
+ DIV(CLK_DIV_PCLK_DBG, "div_pclk_dbg", "div_core2", DIV_CPU0, 20, 3),
+ DIV(CLK_DIV_ATB, "div_atb", "div_core2", DIV_CPU0, 16, 3),
+ DIV(CLK_DIV_COREM, "div_corem", "div_core2", DIV_CPU0, 4, 3),
+ DIV(CLK_DIV_CORE, "div_core", "mout_core", DIV_CPU0, 0, 3),
+
+ /* DIV_CPU1 */
+ DIV(CLK_DIV_HPM, "div_hpm", "div_copy", DIV_CPU1, 4, 3),
+ DIV(CLK_DIV_COPY, "div_copy", "mout_hpm", DIV_CPU1, 0, 3),
+};
+
+static struct samsung_gate_clock gate_clks[] __initdata = {
+ /*
+ * NOTE: Following table is sorted by register address in ascending
+ * order and then bitfield shift in descending order, as it is done
+ * in the User's Manual. When adding new entries, please make sure
+ * that the order is preserved, to avoid merge conflicts and make
+ * further work with defined data easier.
+ */
+
+ /* GATE_IP_LEFTBUS */
+ GATE(CLK_ASYNC_G3D, "async_g3d", "div_aclk_100", GATE_IP_LEFTBUS, 6,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ASYNC_MFCL, "async_mfcl", "div_aclk_100", GATE_IP_LEFTBUS, 4,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMULEFT, "ppmuleft", "div_aclk_100", GATE_IP_LEFTBUS, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_GPIO_LEFT, "gpio_left", "div_aclk_100", GATE_IP_LEFTBUS, 0,
+ CLK_IGNORE_UNUSED, 0),
+
+ /* GATE_IP_RIGHTBUS */
+ GATE(CLK_ASYNC_ISPMX, "async_ispmx", "div_aclk_100",
+ GATE_IP_RIGHTBUS, 9, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ASYNC_FSYSD, "async_fsysd", "div_aclk_100",
+ GATE_IP_RIGHTBUS, 5, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ASYNC_LCD0X, "async_lcd0x", "div_aclk_100",
+ GATE_IP_RIGHTBUS, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ASYNC_CAMX, "async_camx", "div_aclk_100", GATE_IP_RIGHTBUS, 2,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMURIGHT, "ppmuright", "div_aclk_100", GATE_IP_RIGHTBUS, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_GPIO_RIGHT, "gpio_right", "div_aclk_100", GATE_IP_RIGHTBUS, 0,
+ CLK_IGNORE_UNUSED, 0),
+
+ /* GATE_IP_PERIR */
+ GATE(CLK_MONOCNT, "monocnt", "div_aclk_100", GATE_IP_PERIR, 22,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC6, "tzpc6", "div_aclk_100", GATE_IP_PERIR, 21,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PROVISIONKEY1, "provisionkey1", "div_aclk_100",
+ GATE_IP_PERIR, 20, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PROVISIONKEY0, "provisionkey0", "div_aclk_100",
+ GATE_IP_PERIR, 19, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CMU_ISPPART, "cmu_isppart", "div_aclk_100", GATE_IP_PERIR, 18,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TMU_APBIF, "tmu_apbif", "div_aclk_100",
+ GATE_IP_PERIR, 17, 0, 0),
+ GATE(CLK_KEYIF, "keyif", "div_aclk_100", GATE_IP_PERIR, 16, 0, 0),
+ GATE(CLK_RTC, "rtc", "div_aclk_100", GATE_IP_PERIR, 15, 0, 0),
+ GATE(CLK_WDT, "wdt", "div_aclk_100", GATE_IP_PERIR, 14, 0, 0),
+ GATE(CLK_MCT, "mct", "div_aclk_100", GATE_IP_PERIR, 13, 0, 0),
+ GATE(CLK_SECKEY, "seckey", "div_aclk_100", GATE_IP_PERIR, 12,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC5, "tzpc5", "div_aclk_100", GATE_IP_PERIR, 10,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC4, "tzpc4", "div_aclk_100", GATE_IP_PERIR, 9,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC3, "tzpc3", "div_aclk_100", GATE_IP_PERIR, 8,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC2, "tzpc2", "div_aclk_100", GATE_IP_PERIR, 7,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC1, "tzpc1", "div_aclk_100", GATE_IP_PERIR, 6,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC0, "tzpc0", "div_aclk_100", GATE_IP_PERIR, 5,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CMU_COREPART, "cmu_corepart", "div_aclk_100", GATE_IP_PERIR, 4,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CMU_TOPPART, "cmu_toppart", "div_aclk_100", GATE_IP_PERIR, 3,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PMU_APBIF, "pmu_apbif", "div_aclk_100", GATE_IP_PERIR, 2,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SYSREG, "sysreg", "div_aclk_100", GATE_IP_PERIR, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CHIP_ID, "chip_id", "div_aclk_100", GATE_IP_PERIR, 0,
+ CLK_IGNORE_UNUSED, 0),
+
+ /* GATE_SCLK_CAM */
+ GATE(CLK_SCLK_JPEG, "sclk_jpeg", "div_cam_blk",
+ GATE_SCLK_CAM, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_M2MSCALER, "sclk_m2mscaler", "div_cam_blk",
+ GATE_SCLK_CAM, 2, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_GSCALER1, "sclk_gscaler1", "div_cam_blk",
+ GATE_SCLK_CAM, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_GSCALER0, "sclk_gscaler0", "div_cam_blk",
+ GATE_SCLK_CAM, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_MFC */
+ GATE(CLK_SCLK_MFC, "sclk_mfc", "div_mfc",
+ GATE_SCLK_MFC, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_G3D */
+ GATE(CLK_SCLK_G3D, "sclk_g3d", "div_g3d",
+ GATE_SCLK_G3D, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_LCD */
+ GATE(CLK_SCLK_MIPIDPHY2L, "sclk_mipidphy2l", "div_mipi0",
+ GATE_SCLK_LCD, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MIPI0, "sclk_mipi0", "div_mipi0_pre",
+ GATE_SCLK_LCD, 3, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_FIMD0, "sclk_fimd0", "div_fimd0",
+ GATE_SCLK_LCD, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_ISP_TOP */
+ GATE(CLK_SCLK_CAM1, "sclk_cam1", "div_cam1",
+ GATE_SCLK_ISP_TOP, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "div_uart_isp",
+ GATE_SCLK_ISP_TOP, 3, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "div_spi1_isp",
+ GATE_SCLK_ISP_TOP, 2, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "div_spi0_isp",
+ GATE_SCLK_ISP_TOP, 1, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_FSYS */
+ GATE(CLK_SCLK_UPLL, "sclk_upll", "mout_upll", GATE_SCLK_FSYS, 10, 0, 0),
+ GATE(CLK_SCLK_TSADC, "sclk_tsadc", "div_tsadc_pre",
+ GATE_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_EBI, "sclk_ebi", "div_ebi",
+ GATE_SCLK_FSYS, 6, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc1_pre",
+ GATE_SCLK_FSYS, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc0_pre",
+ GATE_SCLK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_PERIL */
+ GATE(CLK_SCLK_I2S, "sclk_i2s", "div_i2s",
+ GATE_SCLK_PERIL, 18, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_PCM, "sclk_pcm", "div_pcm",
+ GATE_SCLK_PERIL, 16, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI1, "sclk_spi1", "div_spi1_pre",
+ GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre",
+ GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
+ GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
+ GATE_SCLK_PERIL, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_IP_CAM */
+ GATE(CLK_QEJPEG, "qejpeg", "div_cam_blk_320", GATE_IP_CAM, 19,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PIXELASYNCM1, "pixelasyncm1", "div_cam_blk_320",
+ GATE_IP_CAM, 18, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PIXELASYNCM0, "pixelasyncm0", "div_cam_blk_320",
+ GATE_IP_CAM, 17, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMUCAMIF, "ppmucamif", "div_cam_blk_320",
+ GATE_IP_CAM, 16, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_QEM2MSCALER, "qem2mscaler", "div_cam_blk_320",
+ GATE_IP_CAM, 14, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_QEGSCALER1, "qegscaler1", "div_cam_blk_320",
+ GATE_IP_CAM, 13, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_QEGSCALER0, "qegscaler0", "div_cam_blk_320",
+ GATE_IP_CAM, 12, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SMMUJPEG, "smmujpeg", "div_cam_blk_320",
+ GATE_IP_CAM, 11, 0, 0),
+ GATE(CLK_SMMUM2M2SCALER, "smmum2m2scaler", "div_cam_blk_320",
+ GATE_IP_CAM, 9, 0, 0),
+ GATE(CLK_SMMUGSCALER1, "smmugscaler1", "div_cam_blk_320",
+ GATE_IP_CAM, 8, 0, 0),
+ GATE(CLK_SMMUGSCALER0, "smmugscaler0", "div_cam_blk_320",
+ GATE_IP_CAM, 7, 0, 0),
+ GATE(CLK_JPEG, "jpeg", "div_cam_blk_320", GATE_IP_CAM, 6, 0, 0),
+ GATE(CLK_M2MSCALER, "m2mscaler", "div_cam_blk_320",
+ GATE_IP_CAM, 2, 0, 0),
+ GATE(CLK_GSCALER1, "gscaler1", "div_cam_blk_320", GATE_IP_CAM, 1, 0, 0),
+ GATE(CLK_GSCALER0, "gscaler0", "div_cam_blk_320", GATE_IP_CAM, 0, 0, 0),
+
+ /* GATE_IP_MFC */
+ GATE(CLK_QEMFC, "qemfc", "div_aclk_200", GATE_IP_MFC, 5,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMUMFC_L, "ppmumfc_l", "div_aclk_200", GATE_IP_MFC, 3,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SMMUMFC_L, "smmumfc_l", "div_aclk_200", GATE_IP_MFC, 1, 0, 0),
+ GATE(CLK_MFC, "mfc", "div_aclk_200", GATE_IP_MFC, 0, 0, 0),
+
+ /* GATE_IP_G3D */
+ GATE(CLK_SMMUG3D, "smmug3d", "div_aclk_200", GATE_IP_G3D, 3, 0, 0),
+ GATE(CLK_QEG3D, "qeg3d", "div_aclk_200", GATE_IP_G3D, 2,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMUG3D, "ppmug3d", "div_aclk_200", GATE_IP_G3D, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_G3D, "g3d", "div_aclk_200", GATE_IP_G3D, 0, 0, 0),
+
+ /* GATE_IP_LCD */
+ GATE(CLK_QE_CH1_LCD, "qe_ch1_lcd", "div_aclk_160", GATE_IP_LCD, 7,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_QE_CH0_LCD, "qe_ch0_lcd", "div_aclk_160", GATE_IP_LCD, 6,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMULCD0, "ppmulcd0", "div_aclk_160", GATE_IP_LCD, 5,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SMMUFIMD0, "smmufimd0", "div_aclk_160", GATE_IP_LCD, 4, 0, 0),
+ GATE(CLK_DSIM0, "dsim0", "div_aclk_160", GATE_IP_LCD, 3, 0, 0),
+ GATE(CLK_SMIES, "smies", "div_aclk_160", GATE_IP_LCD, 2, 0, 0),
+ GATE(CLK_FIMD0, "fimd0", "div_aclk_160", GATE_IP_LCD, 0, 0, 0),
+
+ /* GATE_IP_ISP */
+ GATE(CLK_CAM1, "cam1", "mout_aclk_266_sub", GATE_IP_ISP, 5, 0, 0),
+ GATE(CLK_UART_ISP_TOP, "uart_isp_top", "mout_aclk_266_sub",
+ GATE_IP_ISP, 3, 0, 0),
+ GATE(CLK_SPI1_ISP_TOP, "spi1_isp_top", "mout_aclk_266_sub",
+ GATE_IP_ISP, 2, 0, 0),
+ GATE(CLK_SPI0_ISP_TOP, "spi0_isp_top", "mout_aclk_266_sub",
+ GATE_IP_ISP, 1, 0, 0),
+
+ /* GATE_IP_FSYS */
+ GATE(CLK_TSADC, "tsadc", "div_aclk_200", GATE_IP_FSYS, 20, 0, 0),
+ GATE(CLK_PPMUFILE, "ppmufile", "div_aclk_200", GATE_IP_FSYS, 17,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13, 0, 0),
+ GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12, 0, 0),
+ GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0, 0),
+ GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6, 0, 0),
+ GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5, 0, 0),
+ GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),
+ GATE(CLK_PDMA0, "pdma0", "div_aclk_200", GATE_IP_FSYS, 0, 0, 0),
+
+ /* GATE_IP_PERIL */
+ GATE(CLK_PWM, "pwm", "div_aclk_100", GATE_IP_PERIL, 24, 0, 0),
+ GATE(CLK_PCM, "pcm", "div_aclk_100", GATE_IP_PERIL, 23, 0, 0),
+ GATE(CLK_I2S, "i2s", "div_aclk_100", GATE_IP_PERIL, 21, 0, 0),
+ GATE(CLK_SPI1, "spi1", "div_aclk_100", GATE_IP_PERIL, 17, 0, 0),
+ GATE(CLK_SPI0, "spi0", "div_aclk_100", GATE_IP_PERIL, 16, 0, 0),
+ GATE(CLK_I2C7, "i2c7", "div_aclk_100", GATE_IP_PERIL, 13, 0, 0),
+ GATE(CLK_I2C6, "i2c6", "div_aclk_100", GATE_IP_PERIL, 12, 0, 0),
+ GATE(CLK_I2C5, "i2c5", "div_aclk_100", GATE_IP_PERIL, 11, 0, 0),
+ GATE(CLK_I2C4, "i2c4", "div_aclk_100", GATE_IP_PERIL, 10, 0, 0),
+ GATE(CLK_I2C3, "i2c3", "div_aclk_100", GATE_IP_PERIL, 9, 0, 0),
+ GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0),
+ GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0),
+ GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),
+ GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0),
+ GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),
+};
+
+/* APLL & MPLL & BPLL & UPLL */
+static struct samsung_pll_rate_table exynos3250_pll_rates[] = {
+ PLL_35XX_RATE(1200000000, 400, 4, 1),
+ PLL_35XX_RATE(1100000000, 275, 3, 1),
+ PLL_35XX_RATE(1066000000, 533, 6, 1),
+ PLL_35XX_RATE(1000000000, 250, 3, 1),
+ PLL_35XX_RATE( 960000000, 320, 4, 1),
+ PLL_35XX_RATE( 900000000, 300, 4, 1),
+ PLL_35XX_RATE( 850000000, 425, 6, 1),
+ PLL_35XX_RATE( 800000000, 200, 3, 1),
+ PLL_35XX_RATE( 700000000, 175, 3, 1),
+ PLL_35XX_RATE( 667000000, 667, 12, 1),
+ PLL_35XX_RATE( 600000000, 400, 4, 2),
+ PLL_35XX_RATE( 533000000, 533, 6, 2),
+ PLL_35XX_RATE( 520000000, 260, 3, 2),
+ PLL_35XX_RATE( 500000000, 250, 3, 2),
+ PLL_35XX_RATE( 400000000, 200, 3, 2),
+ PLL_35XX_RATE( 200000000, 200, 3, 3),
+ PLL_35XX_RATE( 100000000, 200, 3, 4),
+ { /* sentinel */ }
+};
+
+/* VPLL */
+static struct samsung_pll_rate_table exynos3250_vpll_rates[] = {
+ PLL_36XX_RATE(600000000, 100, 2, 1, 0),
+ PLL_36XX_RATE(533000000, 266, 3, 2, 32768),
+ PLL_36XX_RATE(519230987, 173, 2, 2, 5046),
+ PLL_36XX_RATE(500000000, 250, 3, 2, 0),
+ PLL_36XX_RATE(445500000, 148, 2, 2, 32768),
+ PLL_36XX_RATE(445055007, 148, 2, 2, 23047),
+ PLL_36XX_RATE(400000000, 200, 3, 2, 0),
+ PLL_36XX_RATE(371250000, 123, 2, 2, 49152),
+ PLL_36XX_RATE(370878997, 185, 3, 2, 28803),
+ PLL_36XX_RATE(340000000, 170, 3, 2, 0),
+ PLL_36XX_RATE(335000015, 111, 2, 2, 43691),
+ PLL_36XX_RATE(333000000, 111, 2, 2, 0),
+ PLL_36XX_RATE(330000000, 110, 2, 2, 0),
+ PLL_36XX_RATE(320000015, 106, 2, 2, 43691),
+ PLL_36XX_RATE(300000000, 100, 2, 2, 0),
+ PLL_36XX_RATE(275000000, 275, 3, 3, 0),
+ PLL_36XX_RATE(222750000, 148, 2, 3, 32768),
+ PLL_36XX_RATE(222528007, 148, 2, 3, 23069),
+ PLL_36XX_RATE(160000000, 160, 3, 3, 0),
+ PLL_36XX_RATE(148500000, 99, 2, 3, 0),
+ PLL_36XX_RATE(148352005, 98, 2, 3, 59070),
+ PLL_36XX_RATE(108000000, 144, 2, 4, 0),
+ PLL_36XX_RATE( 74250000, 99, 2, 4, 0),
+ PLL_36XX_RATE( 74176002, 98, 3, 4, 59070),
+ PLL_36XX_RATE( 54054000, 216, 3, 5, 14156),
+ PLL_36XX_RATE( 54000000, 144, 2, 5, 0),
+ { /* sentinel */ }
+};
+
+static struct samsung_pll_clock exynos3250_plls[nr_plls] __initdata = {
+ [apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll",
+ APLL_LOCK, APLL_CON0, NULL),
+ [mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll",
+ MPLL_LOCK, MPLL_CON0, NULL),
+ [vpll] = PLL(pll_36xx, CLK_FOUT_VPLL, "fout_vpll", "fin_pll",
+ VPLL_LOCK, VPLL_CON0, NULL),
+ [upll] = PLL(pll_35xx, CLK_FOUT_UPLL, "fout_upll", "fin_pll",
+ UPLL_LOCK, UPLL_CON0, NULL),
+};
+
+static void __init exynos3250_cmu_init(struct device_node *np)
+{
+ struct samsung_clk_provider *ctx;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+
+ ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
+
+ samsung_clk_register_fixed_factor(ctx, fixed_factor_clks,
+ ARRAY_SIZE(fixed_factor_clks));
+
+ exynos3250_plls[apll].rate_table = exynos3250_pll_rates;
+ exynos3250_plls[mpll].rate_table = exynos3250_pll_rates;
+ exynos3250_plls[vpll].rate_table = exynos3250_vpll_rates;
+ exynos3250_plls[upll].rate_table = exynos3250_pll_rates;
+
+ samsung_clk_register_pll(ctx, exynos3250_plls,
+ ARRAY_SIZE(exynos3250_plls), reg_base);
+
+ samsung_clk_register_mux(ctx, mux_clks, ARRAY_SIZE(mux_clks));
+ samsung_clk_register_div(ctx, div_clks, ARRAY_SIZE(div_clks));
+ samsung_clk_register_gate(ctx, gate_clks, ARRAY_SIZE(gate_clks));
+
+ exynos3250_clk_sleep_init();
+}
+CLK_OF_DECLARE(exynos3250_cmu, "samsung,exynos3250-cmu", exynos3250_cmu_init);
/* fixed rate clocks generated inside the soc */
static struct samsung_fixed_rate_clock exynos4_fixed_rate_clks[] __initdata = {
FRATE(0, "sclk_hdmi24m", NULL, CLK_IS_ROOT, 24000000),
- FRATE(0, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 27000000),
+ FRATE(CLK_SCLK_HDMIPHY, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 27000000),
FRATE(0, "sclk_usbphy0", NULL, CLK_IS_ROOT, 48000000),
};
GATE(CLK_AUDSS, "audss", "sclk_epll", E4X12_GATE_IP_MAUDIO, 0, 0, 0),
GATE(CLK_MDNIE0, "mdnie0", "aclk160", GATE_IP_LCD0, 2, 0, 0),
GATE(CLK_ROTATOR, "rotator", "aclk200", E4X12_GATE_IP_IMAGE, 1, 0, 0),
- GATE(CLK_MDMA2, "mdma2", "aclk200", E4X12_GATE_IP_IMAGE, 2, 0, 0),
+ GATE(CLK_MDMA, "mdma", "aclk200", E4X12_GATE_IP_IMAGE, 2, 0, 0),
GATE(CLK_SMMU_MDMA, "smmu_mdma", "aclk200", E4X12_GATE_IP_IMAGE, 5, 0,
0),
GATE(CLK_MIPI_HSI, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0),
return xom;
}
-static void __init exynos4_clk_register_finpll(void)
+static void __init exynos4_clk_register_finpll(struct samsung_clk_provider *ctx)
{
struct samsung_fixed_rate_clock fclk;
struct clk *clk;
fclk.parent_name = NULL;
fclk.flags = CLK_IS_ROOT;
fclk.fixed_rate = finpll_f;
- samsung_clk_register_fixed_rate(&fclk, 1);
+ samsung_clk_register_fixed_rate(ctx, &fclk, 1);
}
static void __init exynos4_clk_init(struct device_node *np,
enum exynos4_soc soc)
{
+ struct samsung_clk_provider *ctx;
exynos4_soc = soc;
reg_base = of_iomap(np, 0);
if (!reg_base)
panic("%s: failed to map registers\n", __func__);
- samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+ ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
- samsung_clk_of_register_fixed_ext(exynos4_fixed_rate_ext_clks,
+ samsung_clk_of_register_fixed_ext(ctx, exynos4_fixed_rate_ext_clks,
ARRAY_SIZE(exynos4_fixed_rate_ext_clks),
ext_clk_match);
- exynos4_clk_register_finpll();
+ exynos4_clk_register_finpll(ctx);
if (exynos4_soc == EXYNOS4210) {
- samsung_clk_register_mux(exynos4210_mux_early,
+ samsung_clk_register_mux(ctx, exynos4210_mux_early,
ARRAY_SIZE(exynos4210_mux_early));
if (_get_rate("fin_pll") == 24000000) {
exynos4210_plls[vpll].rate_table =
exynos4210_vpll_rates;
- samsung_clk_register_pll(exynos4210_plls,
+ samsung_clk_register_pll(ctx, exynos4210_plls,
ARRAY_SIZE(exynos4210_plls), reg_base);
} else {
if (_get_rate("fin_pll") == 24000000) {
exynos4x12_vpll_rates;
}
- samsung_clk_register_pll(exynos4x12_plls,
+ samsung_clk_register_pll(ctx, exynos4x12_plls,
ARRAY_SIZE(exynos4x12_plls), reg_base);
}
- samsung_clk_register_fixed_rate(exynos4_fixed_rate_clks,
+ samsung_clk_register_fixed_rate(ctx, exynos4_fixed_rate_clks,
ARRAY_SIZE(exynos4_fixed_rate_clks));
- samsung_clk_register_mux(exynos4_mux_clks,
+ samsung_clk_register_mux(ctx, exynos4_mux_clks,
ARRAY_SIZE(exynos4_mux_clks));
- samsung_clk_register_div(exynos4_div_clks,
+ samsung_clk_register_div(ctx, exynos4_div_clks,
ARRAY_SIZE(exynos4_div_clks));
- samsung_clk_register_gate(exynos4_gate_clks,
+ samsung_clk_register_gate(ctx, exynos4_gate_clks,
ARRAY_SIZE(exynos4_gate_clks));
if (exynos4_soc == EXYNOS4210) {
- samsung_clk_register_fixed_rate(exynos4210_fixed_rate_clks,
+ samsung_clk_register_fixed_rate(ctx, exynos4210_fixed_rate_clks,
ARRAY_SIZE(exynos4210_fixed_rate_clks));
- samsung_clk_register_mux(exynos4210_mux_clks,
+ samsung_clk_register_mux(ctx, exynos4210_mux_clks,
ARRAY_SIZE(exynos4210_mux_clks));
- samsung_clk_register_div(exynos4210_div_clks,
+ samsung_clk_register_div(ctx, exynos4210_div_clks,
ARRAY_SIZE(exynos4210_div_clks));
- samsung_clk_register_gate(exynos4210_gate_clks,
+ samsung_clk_register_gate(ctx, exynos4210_gate_clks,
ARRAY_SIZE(exynos4210_gate_clks));
- samsung_clk_register_alias(exynos4210_aliases,
+ samsung_clk_register_alias(ctx, exynos4210_aliases,
ARRAY_SIZE(exynos4210_aliases));
} else {
- samsung_clk_register_mux(exynos4x12_mux_clks,
+ samsung_clk_register_mux(ctx, exynos4x12_mux_clks,
ARRAY_SIZE(exynos4x12_mux_clks));
- samsung_clk_register_div(exynos4x12_div_clks,
+ samsung_clk_register_div(ctx, exynos4x12_div_clks,
ARRAY_SIZE(exynos4x12_div_clks));
- samsung_clk_register_gate(exynos4x12_gate_clks,
+ samsung_clk_register_gate(ctx, exynos4x12_gate_clks,
ARRAY_SIZE(exynos4x12_gate_clks));
- samsung_clk_register_alias(exynos4x12_aliases,
+ samsung_clk_register_alias(ctx, exynos4x12_aliases,
ARRAY_SIZE(exynos4x12_aliases));
}
- samsung_clk_register_alias(exynos4_aliases,
+ samsung_clk_register_alias(ctx, exynos4_aliases,
ARRAY_SIZE(exynos4_aliases));
exynos4_clk_sleep_init();
#define VPLL_CON0 0x10140
#define GPLL_CON0 0x10150
#define SRC_TOP0 0x10210
+#define SRC_TOP1 0x10214
#define SRC_TOP2 0x10218
#define SRC_TOP3 0x1021c
#define SRC_GSCL 0x10220
#define GATE_IP_GSCL 0x10920
#define GATE_IP_DISP1 0x10928
#define GATE_IP_MFC 0x1092c
+#define GATE_IP_G3D 0x10930
#define GATE_IP_GEN 0x10934
#define GATE_IP_FSYS 0x10944
#define GATE_IP_PERIC 0x10950
DIV_CPU0,
SRC_CORE1,
SRC_TOP0,
+ SRC_TOP1,
SRC_TOP2,
SRC_TOP3,
SRC_GSCL,
DIV_PERIC5,
GATE_IP_GSCL,
GATE_IP_MFC,
+ GATE_IP_G3D,
GATE_IP_GEN,
GATE_IP_FSYS,
GATE_IP_PERIC,
PNAME(mout_vpll_p) = { "mout_vpllsrc", "fout_vpll" };
PNAME(mout_cpll_p) = { "fin_pll", "fout_cpll" };
PNAME(mout_epll_p) = { "fin_pll", "fout_epll" };
+PNAME(mout_gpll_p) = { "fin_pll", "fout_gpll" };
PNAME(mout_mpll_user_p) = { "fin_pll", "mout_mpll" };
PNAME(mout_bpll_user_p) = { "fin_pll", "mout_bpll" };
PNAME(mout_aclk166_p) = { "mout_cpll", "mout_mpll_user" };
PNAME(mout_aclk200_p) = { "mout_mpll_user", "mout_bpll_user" };
+PNAME(mout_aclk400_p) = { "mout_aclk400_g3d_mid", "mout_gpll" };
PNAME(mout_aclk200_sub_p) = { "fin_pll", "div_aclk200" };
PNAME(mout_aclk266_sub_p) = { "fin_pll", "div_aclk266" };
PNAME(mout_aclk333_sub_p) = { "fin_pll", "div_aclk333" };
MUX(0, "mout_aclk166", mout_aclk166_p, SRC_TOP0, 8, 1),
MUX(0, "mout_aclk200", mout_aclk200_p, SRC_TOP0, 12, 1),
MUX(0, "mout_aclk333", mout_aclk166_p, SRC_TOP0, 16, 1),
+ MUX(0, "mout_aclk400_g3d_mid", mout_aclk200_p, SRC_TOP0, 20, 1),
+
+ MUX(0, "mout_aclk400_g3d", mout_aclk400_p, SRC_TOP1, 28, 1),
MUX(0, "mout_cpll", mout_cpll_p, SRC_TOP2, 8, 1),
MUX(0, "mout_epll", mout_epll_p, SRC_TOP2, 12, 1),
MUX(0, "mout_vpll", mout_vpll_p, SRC_TOP2, 16, 1),
MUX(0, "mout_mpll_user", mout_mpll_user_p, SRC_TOP2, 20, 1),
MUX(0, "mout_bpll_user", mout_bpll_user_p, SRC_TOP2, 24, 1),
+ MUX(CLK_MOUT_GPLL, "mout_gpll", mout_gpll_p, SRC_TOP2, 28, 1),
MUX(0, "mout_aclk200_disp1_sub", mout_aclk200_sub_p, SRC_TOP3, 4, 1),
MUX(0, "mout_aclk266_gscl_sub", mout_aclk266_sub_p, SRC_TOP3, 8, 1),
DIV(0, "div_aclk200", "mout_aclk200", DIV_TOP0, 12, 3),
DIV(0, "div_aclk266", "mout_mpll_user", DIV_TOP0, 16, 3),
DIV(0, "div_aclk333", "mout_aclk333", DIV_TOP0, 20, 3),
+ DIV(0, "div_aclk400_g3d", "mout_aclk400_g3d", DIV_TOP0,
+ 24, 3),
DIV(0, "div_aclk66_pre", "mout_mpll_user", DIV_TOP1, 24, 3),
* CMU_ACP
*/
GATE(CLK_MDMA0, "mdma0", "div_aclk266", GATE_IP_ACP, 1, 0, 0),
+ GATE(CLK_SSS, "sss", "div_aclk266", GATE_IP_ACP, 2, 0, 0),
GATE(CLK_G2D, "g2d", "div_aclk200", GATE_IP_ACP, 3, 0, 0),
GATE(CLK_SMMU_MDMA0, "smmu_mdma0", "div_aclk266", GATE_IP_ACP, 5, 0, 0),
0),
GATE(CLK_SMMU_MFCL, "smmu_mfcl", "mout_aclk333_sub", GATE_IP_MFC, 2, 0,
0),
-
+ GATE(CLK_G3D, "g3d", "div_aclk400_g3d", GATE_IP_G3D, 0,
+ CLK_SET_RATE_PARENT, 0),
GATE(CLK_ROTATOR, "rotator", "div_aclk266", GATE_IP_GEN, 1, 0, 0),
GATE(CLK_JPEG, "jpeg", "div_aclk166", GATE_IP_GEN, 2, 0, 0),
GATE(CLK_MDMA1, "mdma1", "div_aclk266", GATE_IP_GEN, 4, 0, 0),
/* register exynox5250 clocks */
static void __init exynos5250_clk_init(struct device_node *np)
{
+ struct samsung_clk_provider *ctx;
+
if (np) {
reg_base = of_iomap(np, 0);
if (!reg_base)
panic("%s: unable to determine soc\n", __func__);
}
- samsung_clk_init(np, reg_base, CLK_NR_CLKS);
- samsung_clk_of_register_fixed_ext(exynos5250_fixed_rate_ext_clks,
+ ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
+ samsung_clk_of_register_fixed_ext(ctx, exynos5250_fixed_rate_ext_clks,
ARRAY_SIZE(exynos5250_fixed_rate_ext_clks),
ext_clk_match);
- samsung_clk_register_mux(exynos5250_pll_pmux_clks,
+ samsung_clk_register_mux(ctx, exynos5250_pll_pmux_clks,
ARRAY_SIZE(exynos5250_pll_pmux_clks));
if (_get_rate("fin_pll") == 24 * MHZ) {
if (_get_rate("mout_vpllsrc") == 24 * MHZ)
exynos5250_plls[vpll].rate_table = vpll_24mhz_tbl;
- samsung_clk_register_pll(exynos5250_plls, ARRAY_SIZE(exynos5250_plls),
- reg_base);
- samsung_clk_register_fixed_rate(exynos5250_fixed_rate_clks,
+ samsung_clk_register_pll(ctx, exynos5250_plls,
+ ARRAY_SIZE(exynos5250_plls),
+ reg_base);
+ samsung_clk_register_fixed_rate(ctx, exynos5250_fixed_rate_clks,
ARRAY_SIZE(exynos5250_fixed_rate_clks));
- samsung_clk_register_fixed_factor(exynos5250_fixed_factor_clks,
+ samsung_clk_register_fixed_factor(ctx, exynos5250_fixed_factor_clks,
ARRAY_SIZE(exynos5250_fixed_factor_clks));
- samsung_clk_register_mux(exynos5250_mux_clks,
+ samsung_clk_register_mux(ctx, exynos5250_mux_clks,
ARRAY_SIZE(exynos5250_mux_clks));
- samsung_clk_register_div(exynos5250_div_clks,
+ samsung_clk_register_div(ctx, exynos5250_div_clks,
ARRAY_SIZE(exynos5250_div_clks));
- samsung_clk_register_gate(exynos5250_gate_clks,
+ samsung_clk_register_gate(ctx, exynos5250_gate_clks,
ARRAY_SIZE(exynos5250_gate_clks));
exynos5250_clk_sleep_init();
--- /dev/null
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Rahul Sharma <rahul.sharma@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5260 SoC.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include "clk-exynos5260.h"
+#include "clk.h"
+#include "clk-pll.h"
+
+#include <dt-bindings/clock/exynos5260-clk.h>
+
+static LIST_HEAD(clock_reg_cache_list);
+
+struct exynos5260_clock_reg_cache {
+ struct list_head node;
+ void __iomem *reg_base;
+ struct samsung_clk_reg_dump *rdump;
+ unsigned int rd_num;
+};
+
+struct exynos5260_cmu_info {
+ /* list of pll clocks and respective count */
+ struct samsung_pll_clock *pll_clks;
+ unsigned int nr_pll_clks;
+ /* list of mux clocks and respective count */
+ struct samsung_mux_clock *mux_clks;
+ unsigned int nr_mux_clks;
+ /* list of div clocks and respective count */
+ struct samsung_div_clock *div_clks;
+ unsigned int nr_div_clks;
+ /* list of gate clocks and respective count */
+ struct samsung_gate_clock *gate_clks;
+ unsigned int nr_gate_clks;
+ /* list of fixed clocks and respective count */
+ struct samsung_fixed_rate_clock *fixed_clks;
+ unsigned int nr_fixed_clks;
+ /* total number of clocks with IDs assigned*/
+ unsigned int nr_clk_ids;
+
+ /* list and number of clocks registers */
+ unsigned long *clk_regs;
+ unsigned int nr_clk_regs;
+};
+
+/*
+ * Applicable for all 2550 Type PLLS for Exynos5260, listed below
+ * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL, BUS_PLL, MEDIA_PLL, G3D_PLL.
+ */
+static struct samsung_pll_rate_table pll2550_24mhz_tbl[] __initdata = {
+ PLL_35XX_RATE(1700000000, 425, 6, 0),
+ PLL_35XX_RATE(1600000000, 200, 3, 0),
+ PLL_35XX_RATE(1500000000, 250, 4, 0),
+ PLL_35XX_RATE(1400000000, 175, 3, 0),
+ PLL_35XX_RATE(1300000000, 325, 6, 0),
+ PLL_35XX_RATE(1200000000, 400, 4, 1),
+ PLL_35XX_RATE(1100000000, 275, 3, 1),
+ PLL_35XX_RATE(1000000000, 250, 3, 1),
+ PLL_35XX_RATE(933000000, 311, 4, 1),
+ PLL_35XX_RATE(900000000, 300, 4, 1),
+ PLL_35XX_RATE(800000000, 200, 3, 1),
+ PLL_35XX_RATE(733000000, 733, 12, 1),
+ PLL_35XX_RATE(700000000, 175, 3, 1),
+ PLL_35XX_RATE(667000000, 667, 12, 1),
+ PLL_35XX_RATE(633000000, 211, 4, 1),
+ PLL_35XX_RATE(620000000, 310, 3, 2),
+ PLL_35XX_RATE(600000000, 400, 4, 2),
+ PLL_35XX_RATE(543000000, 362, 4, 2),
+ PLL_35XX_RATE(533000000, 533, 6, 2),
+ PLL_35XX_RATE(500000000, 250, 3, 2),
+ PLL_35XX_RATE(450000000, 300, 4, 2),
+ PLL_35XX_RATE(400000000, 200, 3, 2),
+ PLL_35XX_RATE(350000000, 175, 3, 2),
+ PLL_35XX_RATE(300000000, 400, 4, 3),
+ PLL_35XX_RATE(266000000, 266, 3, 3),
+ PLL_35XX_RATE(200000000, 200, 3, 3),
+ PLL_35XX_RATE(160000000, 160, 3, 3),
+};
+
+/*
+ * Applicable for 2650 Type PLL for AUD_PLL.
+ */
+static struct samsung_pll_rate_table pll2650_24mhz_tbl[] __initdata = {
+ PLL_36XX_RATE(1600000000, 200, 3, 0, 0),
+ PLL_36XX_RATE(1200000000, 100, 2, 0, 0),
+ PLL_36XX_RATE(1000000000, 250, 3, 1, 0),
+ PLL_36XX_RATE(800000000, 200, 3, 1, 0),
+ PLL_36XX_RATE(600000000, 100, 2, 1, 0),
+ PLL_36XX_RATE(532000000, 266, 3, 2, 0),
+ PLL_36XX_RATE(480000000, 160, 2, 2, 0),
+ PLL_36XX_RATE(432000000, 144, 2, 2, 0),
+ PLL_36XX_RATE(400000000, 200, 3, 2, 0),
+ PLL_36XX_RATE(394073130, 459, 7, 2, 49282),
+ PLL_36XX_RATE(333000000, 111, 2, 2, 0),
+ PLL_36XX_RATE(300000000, 100, 2, 2, 0),
+ PLL_36XX_RATE(266000000, 266, 3, 3, 0),
+ PLL_36XX_RATE(200000000, 200, 3, 3, 0),
+ PLL_36XX_RATE(166000000, 166, 3, 3, 0),
+ PLL_36XX_RATE(133000000, 266, 3, 4, 0),
+ PLL_36XX_RATE(100000000, 200, 3, 4, 0),
+ PLL_36XX_RATE(66000000, 176, 2, 5, 0),
+};
+
+#ifdef CONFIG_PM_SLEEP
+
+static int exynos5260_clk_suspend(void)
+{
+ struct exynos5260_clock_reg_cache *cache;
+
+ list_for_each_entry(cache, &clock_reg_cache_list, node)
+ samsung_clk_save(cache->reg_base, cache->rdump,
+ cache->rd_num);
+
+ return 0;
+}
+
+static void exynos5260_clk_resume(void)
+{
+ struct exynos5260_clock_reg_cache *cache;
+
+ list_for_each_entry(cache, &clock_reg_cache_list, node)
+ samsung_clk_restore(cache->reg_base, cache->rdump,
+ cache->rd_num);
+}
+
+static struct syscore_ops exynos5260_clk_syscore_ops = {
+ .suspend = exynos5260_clk_suspend,
+ .resume = exynos5260_clk_resume,
+};
+
+static void exynos5260_clk_sleep_init(void __iomem *reg_base,
+ unsigned long *rdump,
+ unsigned long nr_rdump)
+{
+ struct exynos5260_clock_reg_cache *reg_cache;
+
+ reg_cache = kzalloc(sizeof(struct exynos5260_clock_reg_cache),
+ GFP_KERNEL);
+ if (!reg_cache)
+ panic("could not allocate register cache.\n");
+
+ reg_cache->rdump = samsung_clk_alloc_reg_dump(rdump, nr_rdump);
+
+ if (!reg_cache->rdump)
+ panic("could not allocate register dump storage.\n");
+
+ if (list_empty(&clock_reg_cache_list))
+ register_syscore_ops(&exynos5260_clk_syscore_ops);
+
+ reg_cache->rd_num = nr_rdump;
+ reg_cache->reg_base = reg_base;
+ list_add_tail(®_cache->node, &clock_reg_cache_list);
+}
+
+#else
+static void exynos5260_clk_sleep_init(void __iomem *reg_base,
+ unsigned long *rdump,
+ unsigned long nr_rdump){}
+#endif
+
+/*
+ * Common function which registers plls, muxes, dividers and gates
+ * for each CMU. It also add CMU register list to register cache.
+ */
+
+void __init exynos5260_cmu_register_one(struct device_node *np,
+ struct exynos5260_cmu_info *cmu)
+{
+ void __iomem *reg_base;
+ struct samsung_clk_provider *ctx;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+
+ ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
+ if (!ctx)
+ panic("%s: unable to alllocate ctx\n", __func__);
+
+ if (cmu->pll_clks)
+ samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks,
+ reg_base);
+ if (cmu->mux_clks)
+ samsung_clk_register_mux(ctx, cmu->mux_clks,
+ cmu->nr_mux_clks);
+ if (cmu->div_clks)
+ samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks);
+ if (cmu->gate_clks)
+ samsung_clk_register_gate(ctx, cmu->gate_clks,
+ cmu->nr_gate_clks);
+ if (cmu->fixed_clks)
+ samsung_clk_register_fixed_rate(ctx, cmu->fixed_clks,
+ cmu->nr_fixed_clks);
+ if (cmu->clk_regs)
+ exynos5260_clk_sleep_init(reg_base, cmu->clk_regs,
+ cmu->nr_clk_regs);
+}
+
+
+/* CMU_AUD */
+
+static unsigned long aud_clk_regs[] __initdata = {
+ MUX_SEL_AUD,
+ DIV_AUD0,
+ DIV_AUD1,
+ EN_ACLK_AUD,
+ EN_PCLK_AUD,
+ EN_SCLK_AUD,
+ EN_IP_AUD,
+};
+
+PNAME(mout_aud_pll_user_p) = {"fin_pll", "fout_aud_pll"};
+PNAME(mout_sclk_aud_i2s_p) = {"mout_aud_pll_user", "ioclk_i2s_cdclk"};
+PNAME(mout_sclk_aud_pcm_p) = {"mout_aud_pll_user", "ioclk_pcm_extclk"};
+
+struct samsung_mux_clock aud_mux_clks[] __initdata = {
+ MUX(AUD_MOUT_AUD_PLL_USER, "mout_aud_pll_user", mout_aud_pll_user_p,
+ MUX_SEL_AUD, 0, 1),
+ MUX(AUD_MOUT_SCLK_AUD_I2S, "mout_sclk_aud_i2s", mout_sclk_aud_i2s_p,
+ MUX_SEL_AUD, 4, 1),
+ MUX(AUD_MOUT_SCLK_AUD_PCM, "mout_sclk_aud_pcm", mout_sclk_aud_pcm_p,
+ MUX_SEL_AUD, 8, 1),
+};
+
+struct samsung_div_clock aud_div_clks[] __initdata = {
+ DIV(AUD_DOUT_ACLK_AUD_131, "dout_aclk_aud_131", "mout_aud_pll_user",
+ DIV_AUD0, 0, 4),
+
+ DIV(AUD_DOUT_SCLK_AUD_I2S, "dout_sclk_aud_i2s", "mout_sclk_aud_i2s",
+ DIV_AUD1, 0, 4),
+ DIV(AUD_DOUT_SCLK_AUD_PCM, "dout_sclk_aud_pcm", "mout_sclk_aud_pcm",
+ DIV_AUD1, 4, 8),
+ DIV(AUD_DOUT_SCLK_AUD_UART, "dout_sclk_aud_uart", "mout_aud_pll_user",
+ DIV_AUD1, 12, 4),
+};
+
+struct samsung_gate_clock aud_gate_clks[] __initdata = {
+ GATE(AUD_SCLK_I2S, "sclk_aud_i2s", "dout_sclk_aud_i2s",
+ EN_SCLK_AUD, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(AUD_SCLK_PCM, "sclk_aud_pcm", "dout_sclk_aud_pcm",
+ EN_SCLK_AUD, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(AUD_SCLK_AUD_UART, "sclk_aud_uart", "dout_sclk_aud_uart",
+ EN_SCLK_AUD, 2, CLK_SET_RATE_PARENT, 0),
+
+ GATE(AUD_CLK_SRAMC, "clk_sramc", "dout_aclk_aud_131", EN_IP_AUD,
+ 0, 0, 0),
+ GATE(AUD_CLK_DMAC, "clk_dmac", "dout_aclk_aud_131",
+ EN_IP_AUD, 1, 0, 0),
+ GATE(AUD_CLK_I2S, "clk_i2s", "dout_aclk_aud_131", EN_IP_AUD, 2, 0, 0),
+ GATE(AUD_CLK_PCM, "clk_pcm", "dout_aclk_aud_131", EN_IP_AUD, 3, 0, 0),
+ GATE(AUD_CLK_AUD_UART, "clk_aud_uart", "dout_aclk_aud_131",
+ EN_IP_AUD, 4, 0, 0),
+};
+
+static void __init exynos5260_clk_aud_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = aud_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(aud_mux_clks);
+ cmu.div_clks = aud_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(aud_div_clks);
+ cmu.gate_clks = aud_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(aud_gate_clks);
+ cmu.nr_clk_ids = AUD_NR_CLK;
+ cmu.clk_regs = aud_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(aud_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_aud, "samsung,exynos5260-clock-aud",
+ exynos5260_clk_aud_init);
+
+
+/* CMU_DISP */
+
+static unsigned long disp_clk_regs[] __initdata = {
+ MUX_SEL_DISP0,
+ MUX_SEL_DISP1,
+ MUX_SEL_DISP2,
+ MUX_SEL_DISP3,
+ MUX_SEL_DISP4,
+ DIV_DISP,
+ EN_ACLK_DISP,
+ EN_PCLK_DISP,
+ EN_SCLK_DISP0,
+ EN_SCLK_DISP1,
+ EN_IP_DISP,
+ EN_IP_DISP_BUS,
+};
+
+PNAME(mout_phyclk_dptx_phy_ch3_txd_clk_user_p) = {"fin_pll",
+ "phyclk_dptx_phy_ch3_txd_clk"};
+PNAME(mout_phyclk_dptx_phy_ch2_txd_clk_user_p) = {"fin_pll",
+ "phyclk_dptx_phy_ch2_txd_clk"};
+PNAME(mout_phyclk_dptx_phy_ch1_txd_clk_user_p) = {"fin_pll",
+ "phyclk_dptx_phy_ch1_txd_clk"};
+PNAME(mout_phyclk_dptx_phy_ch0_txd_clk_user_p) = {"fin_pll",
+ "phyclk_dptx_phy_ch0_txd_clk"};
+PNAME(mout_aclk_disp_222_user_p) = {"fin_pll", "dout_aclk_disp_222"};
+PNAME(mout_sclk_disp_pixel_user_p) = {"fin_pll", "dout_sclk_disp_pixel"};
+PNAME(mout_aclk_disp_333_user_p) = {"fin_pll", "dout_aclk_disp_333"};
+PNAME(mout_phyclk_hdmi_phy_tmds_clko_user_p) = {"fin_pll",
+ "phyclk_hdmi_phy_tmds_clko"};
+PNAME(mout_phyclk_hdmi_phy_ref_clko_user_p) = {"fin_pll",
+ "phyclk_hdmi_phy_ref_clko"};
+PNAME(mout_phyclk_hdmi_phy_pixel_clko_user_p) = {"fin_pll",
+ "phyclk_hdmi_phy_pixel_clko"};
+PNAME(mout_phyclk_hdmi_link_o_tmds_clkhi_user_p) = {"fin_pll",
+ "phyclk_hdmi_link_o_tmds_clkhi"};
+PNAME(mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p) = {"fin_pll",
+ "phyclk_mipi_dphy_4l_m_txbyte_clkhs"};
+PNAME(mout_phyclk_dptx_phy_o_ref_clk_24m_user_p) = {"fin_pll",
+ "phyclk_dptx_phy_o_ref_clk_24m"};
+PNAME(mout_phyclk_dptx_phy_clk_div2_user_p) = {"fin_pll",
+ "phyclk_dptx_phy_clk_div2"};
+PNAME(mout_sclk_hdmi_pixel_p) = {"mout_sclk_disp_pixel_user",
+ "mout_aclk_disp_222_user"};
+PNAME(mout_phyclk_mipi_dphy_4lmrxclk_esc0_user_p) = {"fin_pll",
+ "phyclk_mipi_dphy_4l_m_rxclkesc0"};
+PNAME(mout_sclk_hdmi_spdif_p) = {"fin_pll", "ioclk_spdif_extclk",
+ "dout_aclk_peri_aud", "phyclk_hdmi_phy_ref_cko"};
+
+struct samsung_mux_clock disp_mux_clks[] __initdata = {
+ MUX(DISP_MOUT_ACLK_DISP_333_USER, "mout_aclk_disp_333_user",
+ mout_aclk_disp_333_user_p,
+ MUX_SEL_DISP0, 0, 1),
+ MUX(DISP_MOUT_SCLK_DISP_PIXEL_USER, "mout_sclk_disp_pixel_user",
+ mout_sclk_disp_pixel_user_p,
+ MUX_SEL_DISP0, 4, 1),
+ MUX(DISP_MOUT_ACLK_DISP_222_USER, "mout_aclk_disp_222_user",
+ mout_aclk_disp_222_user_p,
+ MUX_SEL_DISP0, 8, 1),
+ MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH0_TXD_CLK_USER,
+ "mout_phyclk_dptx_phy_ch0_txd_clk_user",
+ mout_phyclk_dptx_phy_ch0_txd_clk_user_p,
+ MUX_SEL_DISP0, 16, 1),
+ MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH1_TXD_CLK_USER,
+ "mout_phyclk_dptx_phy_ch1_txd_clk_user",
+ mout_phyclk_dptx_phy_ch1_txd_clk_user_p,
+ MUX_SEL_DISP0, 20, 1),
+ MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH2_TXD_CLK_USER,
+ "mout_phyclk_dptx_phy_ch2_txd_clk_user",
+ mout_phyclk_dptx_phy_ch2_txd_clk_user_p,
+ MUX_SEL_DISP0, 24, 1),
+ MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CH3_TXD_CLK_USER,
+ "mout_phyclk_dptx_phy_ch3_txd_clk_user",
+ mout_phyclk_dptx_phy_ch3_txd_clk_user_p,
+ MUX_SEL_DISP0, 28, 1),
+
+ MUX(DISP_MOUT_PHYCLK_DPTX_PHY_CLK_DIV2_USER,
+ "mout_phyclk_dptx_phy_clk_div2_user",
+ mout_phyclk_dptx_phy_clk_div2_user_p,
+ MUX_SEL_DISP1, 0, 1),
+ MUX(DISP_MOUT_PHYCLK_DPTX_PHY_O_REF_CLK_24M_USER,
+ "mout_phyclk_dptx_phy_o_ref_clk_24m_user",
+ mout_phyclk_dptx_phy_o_ref_clk_24m_user_p,
+ MUX_SEL_DISP1, 4, 1),
+ MUX(DISP_MOUT_PHYCLK_MIPI_DPHY_4L_M_TXBYTE_CLKHS,
+ "mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs",
+ mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p,
+ MUX_SEL_DISP1, 8, 1),
+ MUX(DISP_MOUT_PHYCLK_HDMI_LINK_O_TMDS_CLKHI_USER,
+ "mout_phyclk_hdmi_link_o_tmds_clkhi_user",
+ mout_phyclk_hdmi_link_o_tmds_clkhi_user_p,
+ MUX_SEL_DISP1, 16, 1),
+ MUX(DISP_MOUT_HDMI_PHY_PIXEL,
+ "mout_phyclk_hdmi_phy_pixel_clko_user",
+ mout_phyclk_hdmi_phy_pixel_clko_user_p,
+ MUX_SEL_DISP1, 20, 1),
+ MUX(DISP_MOUT_PHYCLK_HDMI_PHY_REF_CLKO_USER,
+ "mout_phyclk_hdmi_phy_ref_clko_user",
+ mout_phyclk_hdmi_phy_ref_clko_user_p,
+ MUX_SEL_DISP1, 24, 1),
+ MUX(DISP_MOUT_PHYCLK_HDMI_PHY_TMDS_CLKO_USER,
+ "mout_phyclk_hdmi_phy_tmds_clko_user",
+ mout_phyclk_hdmi_phy_tmds_clko_user_p,
+ MUX_SEL_DISP1, 28, 1),
+
+ MUX(DISP_MOUT_PHYCLK_MIPI_DPHY_4LMRXCLK_ESC0_USER,
+ "mout_phyclk_mipi_dphy_4lmrxclk_esc0_user",
+ mout_phyclk_mipi_dphy_4lmrxclk_esc0_user_p,
+ MUX_SEL_DISP2, 0, 1),
+ MUX(DISP_MOUT_SCLK_HDMI_PIXEL, "mout_sclk_hdmi_pixel",
+ mout_sclk_hdmi_pixel_p,
+ MUX_SEL_DISP2, 4, 1),
+
+ MUX(DISP_MOUT_SCLK_HDMI_SPDIF, "mout_sclk_hdmi_spdif",
+ mout_sclk_hdmi_spdif_p,
+ MUX_SEL_DISP4, 4, 2),
+};
+
+struct samsung_div_clock disp_div_clks[] __initdata = {
+ DIV(DISP_DOUT_PCLK_DISP_111, "dout_pclk_disp_111",
+ "mout_aclk_disp_222_user",
+ DIV_DISP, 8, 4),
+ DIV(DISP_DOUT_SCLK_FIMD1_EXTCLKPLL, "dout_sclk_fimd1_extclkpll",
+ "mout_sclk_disp_pixel_user",
+ DIV_DISP, 12, 4),
+ DIV(DISP_DOUT_SCLK_HDMI_PHY_PIXEL_CLKI,
+ "dout_sclk_hdmi_phy_pixel_clki",
+ "mout_sclk_hdmi_pixel",
+ DIV_DISP, 16, 4),
+};
+
+struct samsung_gate_clock disp_gate_clks[] __initdata = {
+ GATE(DISP_MOUT_HDMI_PHY_PIXEL_USER, "sclk_hdmi_link_i_pixel",
+ "mout_phyclk_hdmi_phy_pixel_clko_user",
+ EN_SCLK_DISP0, 26, CLK_SET_RATE_PARENT, 0),
+ GATE(DISP_SCLK_PIXEL, "sclk_hdmi_phy_pixel_clki",
+ "dout_sclk_hdmi_phy_pixel_clki",
+ EN_SCLK_DISP0, 29, CLK_SET_RATE_PARENT, 0),
+
+ GATE(DISP_CLK_DP, "clk_dptx_link", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 4, 0, 0),
+ GATE(DISP_CLK_DPPHY, "clk_dptx_phy", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 5, 0, 0),
+ GATE(DISP_CLK_DSIM1, "clk_dsim1", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 6, 0, 0),
+ GATE(DISP_CLK_FIMD1, "clk_fimd1", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 7, 0, 0),
+ GATE(DISP_CLK_HDMI, "clk_hdmi", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 8, 0, 0),
+ GATE(DISP_CLK_HDMIPHY, "clk_hdmiphy", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 9, 0, 0),
+ GATE(DISP_CLK_MIPIPHY, "clk_mipi_dphy", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 10, 0, 0),
+ GATE(DISP_CLK_MIXER, "clk_mixer", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 11, 0, 0),
+ GATE(DISP_CLK_PIXEL_DISP, "clk_pixel_disp", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 12, CLK_IGNORE_UNUSED, 0),
+ GATE(DISP_CLK_PIXEL_MIXER, "clk_pixel_mixer", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 13, CLK_IGNORE_UNUSED, 0),
+ GATE(DISP_CLK_SMMU_FIMD1M0, "clk_smmu3_fimd1m0",
+ "mout_aclk_disp_222_user",
+ EN_IP_DISP, 22, 0, 0),
+ GATE(DISP_CLK_SMMU_FIMD1M1, "clk_smmu3_fimd1m1",
+ "mout_aclk_disp_222_user",
+ EN_IP_DISP, 23, 0, 0),
+ GATE(DISP_CLK_SMMU_TV, "clk_smmu3_tv", "mout_aclk_disp_222_user",
+ EN_IP_DISP, 25, 0, 0),
+};
+
+static void __init exynos5260_clk_disp_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = disp_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(disp_mux_clks);
+ cmu.div_clks = disp_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(disp_div_clks);
+ cmu.gate_clks = disp_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(disp_gate_clks);
+ cmu.nr_clk_ids = DISP_NR_CLK;
+ cmu.clk_regs = disp_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(disp_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_disp, "samsung,exynos5260-clock-disp",
+ exynos5260_clk_disp_init);
+
+
+/* CMU_EGL */
+
+static unsigned long egl_clk_regs[] __initdata = {
+ EGL_PLL_LOCK,
+ EGL_PLL_CON0,
+ EGL_PLL_CON1,
+ EGL_PLL_FREQ_DET,
+ MUX_SEL_EGL,
+ MUX_ENABLE_EGL,
+ DIV_EGL,
+ DIV_EGL_PLL_FDET,
+ EN_ACLK_EGL,
+ EN_PCLK_EGL,
+ EN_SCLK_EGL,
+};
+
+PNAME(mout_egl_b_p) = {"mout_egl_pll", "dout_bus_pll"};
+PNAME(mout_egl_pll_p) = {"fin_pll", "fout_egl_pll"};
+
+struct samsung_mux_clock egl_mux_clks[] __initdata = {
+ MUX(EGL_MOUT_EGL_PLL, "mout_egl_pll", mout_egl_pll_p,
+ MUX_SEL_EGL, 4, 1),
+ MUX(EGL_MOUT_EGL_B, "mout_egl_b", mout_egl_b_p, MUX_SEL_EGL, 16, 1),
+};
+
+struct samsung_div_clock egl_div_clks[] __initdata = {
+ DIV(EGL_DOUT_EGL1, "dout_egl1", "mout_egl_b", DIV_EGL, 0, 3),
+ DIV(EGL_DOUT_EGL2, "dout_egl2", "dout_egl1", DIV_EGL, 4, 3),
+ DIV(EGL_DOUT_ACLK_EGL, "dout_aclk_egl", "dout_egl2", DIV_EGL, 8, 3),
+ DIV(EGL_DOUT_PCLK_EGL, "dout_pclk_egl", "dout_egl_atclk",
+ DIV_EGL, 12, 3),
+ DIV(EGL_DOUT_EGL_ATCLK, "dout_egl_atclk", "dout_egl2", DIV_EGL, 16, 3),
+ DIV(EGL_DOUT_EGL_PCLK_DBG, "dout_egl_pclk_dbg", "dout_egl_atclk",
+ DIV_EGL, 20, 3),
+ DIV(EGL_DOUT_EGL_PLL, "dout_egl_pll", "mout_egl_b", DIV_EGL, 24, 3),
+};
+
+static struct samsung_pll_clock egl_pll_clks[] __initdata = {
+ PLL(pll_2550xx, EGL_FOUT_EGL_PLL, "fout_egl_pll", "fin_pll",
+ EGL_PLL_LOCK, EGL_PLL_CON0,
+ pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_egl_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.pll_clks = egl_pll_clks;
+ cmu.nr_pll_clks = ARRAY_SIZE(egl_pll_clks);
+ cmu.mux_clks = egl_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(egl_mux_clks);
+ cmu.div_clks = egl_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(egl_div_clks);
+ cmu.nr_clk_ids = EGL_NR_CLK;
+ cmu.clk_regs = egl_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(egl_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_egl, "samsung,exynos5260-clock-egl",
+ exynos5260_clk_egl_init);
+
+
+/* CMU_FSYS */
+
+static unsigned long fsys_clk_regs[] __initdata = {
+ MUX_SEL_FSYS0,
+ MUX_SEL_FSYS1,
+ EN_ACLK_FSYS,
+ EN_ACLK_FSYS_SECURE_RTIC,
+ EN_ACLK_FSYS_SECURE_SMMU_RTIC,
+ EN_SCLK_FSYS,
+ EN_IP_FSYS,
+ EN_IP_FSYS_SECURE_RTIC,
+ EN_IP_FSYS_SECURE_SMMU_RTIC,
+};
+
+PNAME(mout_phyclk_usbhost20_phyclk_user_p) = {"fin_pll",
+ "phyclk_usbhost20_phy_phyclock"};
+PNAME(mout_phyclk_usbhost20_freeclk_user_p) = {"fin_pll",
+ "phyclk_usbhost20_phy_freeclk"};
+PNAME(mout_phyclk_usbhost20_clk48mohci_user_p) = {"fin_pll",
+ "phyclk_usbhost20_phy_clk48mohci"};
+PNAME(mout_phyclk_usbdrd30_pipe_pclk_user_p) = {"fin_pll",
+ "phyclk_usbdrd30_udrd30_pipe_pclk"};
+PNAME(mout_phyclk_usbdrd30_phyclock_user_p) = {"fin_pll",
+ "phyclk_usbdrd30_udrd30_phyclock"};
+
+struct samsung_mux_clock fsys_mux_clks[] __initdata = {
+ MUX(FSYS_MOUT_PHYCLK_USBDRD30_PHYCLOCK_USER,
+ "mout_phyclk_usbdrd30_phyclock_user",
+ mout_phyclk_usbdrd30_phyclock_user_p,
+ MUX_SEL_FSYS1, 0, 1),
+ MUX(FSYS_MOUT_PHYCLK_USBDRD30_PIPE_PCLK_USER,
+ "mout_phyclk_usbdrd30_pipe_pclk_user",
+ mout_phyclk_usbdrd30_pipe_pclk_user_p,
+ MUX_SEL_FSYS1, 4, 1),
+ MUX(FSYS_MOUT_PHYCLK_USBHOST20_CLK48MOHCI_USER,
+ "mout_phyclk_usbhost20_clk48mohci_user",
+ mout_phyclk_usbhost20_clk48mohci_user_p,
+ MUX_SEL_FSYS1, 8, 1),
+ MUX(FSYS_MOUT_PHYCLK_USBHOST20_FREECLK_USER,
+ "mout_phyclk_usbhost20_freeclk_user",
+ mout_phyclk_usbhost20_freeclk_user_p,
+ MUX_SEL_FSYS1, 12, 1),
+ MUX(FSYS_MOUT_PHYCLK_USBHOST20_PHYCLK_USER,
+ "mout_phyclk_usbhost20_phyclk_user",
+ mout_phyclk_usbhost20_phyclk_user_p,
+ MUX_SEL_FSYS1, 16, 1),
+};
+
+struct samsung_gate_clock fsys_gate_clks[] __initdata = {
+ GATE(FSYS_PHYCLK_USBHOST20, "phyclk_usbhost20_phyclock",
+ "mout_phyclk_usbdrd30_phyclock_user",
+ EN_SCLK_FSYS, 1, 0, 0),
+ GATE(FSYS_PHYCLK_USBDRD30, "phyclk_usbdrd30_udrd30_phyclock_g",
+ "mout_phyclk_usbdrd30_phyclock_user",
+ EN_SCLK_FSYS, 7, 0, 0),
+
+ GATE(FSYS_CLK_MMC0, "clk_mmc0", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 6, 0, 0),
+ GATE(FSYS_CLK_MMC1, "clk_mmc1", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 7, 0, 0),
+ GATE(FSYS_CLK_MMC2, "clk_mmc2", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 8, 0, 0),
+ GATE(FSYS_CLK_PDMA, "clk_pdma", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 9, 0, 0),
+ GATE(FSYS_CLK_SROMC, "clk_sromc", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 13, 0, 0),
+ GATE(FSYS_CLK_USBDRD30, "clk_usbdrd30", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 14, 0, 0),
+ GATE(FSYS_CLK_USBHOST20, "clk_usbhost20", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 15, 0, 0),
+ GATE(FSYS_CLK_USBLINK, "clk_usblink", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 18, 0, 0),
+ GATE(FSYS_CLK_TSI, "clk_tsi", "dout_aclk_fsys_200",
+ EN_IP_FSYS, 20, 0, 0),
+
+ GATE(FSYS_CLK_RTIC, "clk_rtic", "dout_aclk_fsys_200",
+ EN_IP_FSYS_SECURE_RTIC, 11, 0, 0),
+ GATE(FSYS_CLK_SMMU_RTIC, "clk_smmu_rtic", "dout_aclk_fsys_200",
+ EN_IP_FSYS_SECURE_SMMU_RTIC, 12, 0, 0),
+};
+
+static void __init exynos5260_clk_fsys_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = fsys_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(fsys_mux_clks);
+ cmu.gate_clks = fsys_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(fsys_gate_clks);
+ cmu.nr_clk_ids = FSYS_NR_CLK;
+ cmu.clk_regs = fsys_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(fsys_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_fsys, "samsung,exynos5260-clock-fsys",
+ exynos5260_clk_fsys_init);
+
+
+/* CMU_G2D */
+
+static unsigned long g2d_clk_regs[] __initdata = {
+ MUX_SEL_G2D,
+ MUX_STAT_G2D,
+ DIV_G2D,
+ EN_ACLK_G2D,
+ EN_ACLK_G2D_SECURE_SSS,
+ EN_ACLK_G2D_SECURE_SLIM_SSS,
+ EN_ACLK_G2D_SECURE_SMMU_SLIM_SSS,
+ EN_ACLK_G2D_SECURE_SMMU_SSS,
+ EN_ACLK_G2D_SECURE_SMMU_MDMA,
+ EN_ACLK_G2D_SECURE_SMMU_G2D,
+ EN_PCLK_G2D,
+ EN_PCLK_G2D_SECURE_SMMU_SLIM_SSS,
+ EN_PCLK_G2D_SECURE_SMMU_SSS,
+ EN_PCLK_G2D_SECURE_SMMU_MDMA,
+ EN_PCLK_G2D_SECURE_SMMU_G2D,
+ EN_IP_G2D,
+ EN_IP_G2D_SECURE_SSS,
+ EN_IP_G2D_SECURE_SLIM_SSS,
+ EN_IP_G2D_SECURE_SMMU_SLIM_SSS,
+ EN_IP_G2D_SECURE_SMMU_SSS,
+ EN_IP_G2D_SECURE_SMMU_MDMA,
+ EN_IP_G2D_SECURE_SMMU_G2D,
+};
+
+PNAME(mout_aclk_g2d_333_user_p) = {"fin_pll", "dout_aclk_g2d_333"};
+
+struct samsung_mux_clock g2d_mux_clks[] __initdata = {
+ MUX(G2D_MOUT_ACLK_G2D_333_USER, "mout_aclk_g2d_333_user",
+ mout_aclk_g2d_333_user_p,
+ MUX_SEL_G2D, 0, 1),
+};
+
+struct samsung_div_clock g2d_div_clks[] __initdata = {
+ DIV(G2D_DOUT_PCLK_G2D_83, "dout_pclk_g2d_83", "mout_aclk_g2d_333_user",
+ DIV_G2D, 0, 3),
+};
+
+struct samsung_gate_clock g2d_gate_clks[] __initdata = {
+ GATE(G2D_CLK_G2D, "clk_g2d", "mout_aclk_g2d_333_user",
+ EN_IP_G2D, 4, 0, 0),
+ GATE(G2D_CLK_JPEG, "clk_jpeg", "mout_aclk_g2d_333_user",
+ EN_IP_G2D, 5, 0, 0),
+ GATE(G2D_CLK_MDMA, "clk_mdma", "mout_aclk_g2d_333_user",
+ EN_IP_G2D, 6, 0, 0),
+ GATE(G2D_CLK_SMMU3_JPEG, "clk_smmu3_jpeg", "mout_aclk_g2d_333_user",
+ EN_IP_G2D, 16, 0, 0),
+
+ GATE(G2D_CLK_SSS, "clk_sss", "mout_aclk_g2d_333_user",
+ EN_IP_G2D_SECURE_SSS, 17, 0, 0),
+
+ GATE(G2D_CLK_SLIM_SSS, "clk_slim_sss", "mout_aclk_g2d_333_user",
+ EN_IP_G2D_SECURE_SLIM_SSS, 11, 0, 0),
+
+ GATE(G2D_CLK_SMMU_SLIM_SSS, "clk_smmu_slim_sss",
+ "mout_aclk_g2d_333_user",
+ EN_IP_G2D_SECURE_SMMU_SLIM_SSS, 13, 0, 0),
+
+ GATE(G2D_CLK_SMMU_SSS, "clk_smmu_sss", "mout_aclk_g2d_333_user",
+ EN_IP_G2D_SECURE_SMMU_SSS, 14, 0, 0),
+
+ GATE(G2D_CLK_SMMU_MDMA, "clk_smmu_mdma", "mout_aclk_g2d_333_user",
+ EN_IP_G2D_SECURE_SMMU_MDMA, 12, 0, 0),
+
+ GATE(G2D_CLK_SMMU3_G2D, "clk_smmu3_g2d", "mout_aclk_g2d_333_user",
+ EN_IP_G2D_SECURE_SMMU_G2D, 15, 0, 0),
+};
+
+static void __init exynos5260_clk_g2d_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = g2d_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(g2d_mux_clks);
+ cmu.div_clks = g2d_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(g2d_div_clks);
+ cmu.gate_clks = g2d_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(g2d_gate_clks);
+ cmu.nr_clk_ids = G2D_NR_CLK;
+ cmu.clk_regs = g2d_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(g2d_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_g2d, "samsung,exynos5260-clock-g2d",
+ exynos5260_clk_g2d_init);
+
+
+/* CMU_G3D */
+
+static unsigned long g3d_clk_regs[] __initdata = {
+ G3D_PLL_LOCK,
+ G3D_PLL_CON0,
+ G3D_PLL_CON1,
+ G3D_PLL_FDET,
+ MUX_SEL_G3D,
+ DIV_G3D,
+ DIV_G3D_PLL_FDET,
+ EN_ACLK_G3D,
+ EN_PCLK_G3D,
+ EN_SCLK_G3D,
+ EN_IP_G3D,
+};
+
+PNAME(mout_g3d_pll_p) = {"fin_pll", "fout_g3d_pll"};
+
+struct samsung_mux_clock g3d_mux_clks[] __initdata = {
+ MUX(G3D_MOUT_G3D_PLL, "mout_g3d_pll", mout_g3d_pll_p,
+ MUX_SEL_G3D, 0, 1),
+};
+
+struct samsung_div_clock g3d_div_clks[] __initdata = {
+ DIV(G3D_DOUT_PCLK_G3D, "dout_pclk_g3d", "dout_aclk_g3d", DIV_G3D, 0, 3),
+ DIV(G3D_DOUT_ACLK_G3D, "dout_aclk_g3d", "mout_g3d_pll", DIV_G3D, 4, 3),
+};
+
+struct samsung_gate_clock g3d_gate_clks[] __initdata = {
+ GATE(G3D_CLK_G3D, "clk_g3d", "dout_aclk_g3d", EN_IP_G3D, 2, 0, 0),
+ GATE(G3D_CLK_G3D_HPM, "clk_g3d_hpm", "dout_aclk_g3d",
+ EN_IP_G3D, 3, 0, 0),
+};
+
+static struct samsung_pll_clock g3d_pll_clks[] __initdata = {
+ PLL(pll_2550, G3D_FOUT_G3D_PLL, "fout_g3d_pll", "fin_pll",
+ G3D_PLL_LOCK, G3D_PLL_CON0,
+ pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_g3d_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.pll_clks = g3d_pll_clks;
+ cmu.nr_pll_clks = ARRAY_SIZE(g3d_pll_clks);
+ cmu.mux_clks = g3d_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(g3d_mux_clks);
+ cmu.div_clks = g3d_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(g3d_div_clks);
+ cmu.gate_clks = g3d_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(g3d_gate_clks);
+ cmu.nr_clk_ids = G3D_NR_CLK;
+ cmu.clk_regs = g3d_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(g3d_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_g3d, "samsung,exynos5260-clock-g3d",
+ exynos5260_clk_g3d_init);
+
+
+/* CMU_GSCL */
+
+static unsigned long gscl_clk_regs[] __initdata = {
+ MUX_SEL_GSCL,
+ DIV_GSCL,
+ EN_ACLK_GSCL,
+ EN_ACLK_GSCL_FIMC,
+ EN_ACLK_GSCL_SECURE_SMMU_GSCL0,
+ EN_ACLK_GSCL_SECURE_SMMU_GSCL1,
+ EN_ACLK_GSCL_SECURE_SMMU_MSCL0,
+ EN_ACLK_GSCL_SECURE_SMMU_MSCL1,
+ EN_PCLK_GSCL,
+ EN_PCLK_GSCL_FIMC,
+ EN_PCLK_GSCL_SECURE_SMMU_GSCL0,
+ EN_PCLK_GSCL_SECURE_SMMU_GSCL1,
+ EN_PCLK_GSCL_SECURE_SMMU_MSCL0,
+ EN_PCLK_GSCL_SECURE_SMMU_MSCL1,
+ EN_SCLK_GSCL,
+ EN_SCLK_GSCL_FIMC,
+ EN_IP_GSCL,
+ EN_IP_GSCL_FIMC,
+ EN_IP_GSCL_SECURE_SMMU_GSCL0,
+ EN_IP_GSCL_SECURE_SMMU_GSCL1,
+ EN_IP_GSCL_SECURE_SMMU_MSCL0,
+ EN_IP_GSCL_SECURE_SMMU_MSCL1,
+};
+
+PNAME(mout_aclk_gscl_333_user_p) = {"fin_pll", "dout_aclk_gscl_333"};
+PNAME(mout_aclk_m2m_400_user_p) = {"fin_pll", "dout_aclk_gscl_400"};
+PNAME(mout_aclk_gscl_fimc_user_p) = {"fin_pll", "dout_aclk_gscl_400"};
+PNAME(mout_aclk_csis_p) = {"dout_aclk_csis_200", "mout_aclk_gscl_fimc_user"};
+
+struct samsung_mux_clock gscl_mux_clks[] __initdata = {
+ MUX(GSCL_MOUT_ACLK_GSCL_333_USER, "mout_aclk_gscl_333_user",
+ mout_aclk_gscl_333_user_p,
+ MUX_SEL_GSCL, 0, 1),
+ MUX(GSCL_MOUT_ACLK_M2M_400_USER, "mout_aclk_m2m_400_user",
+ mout_aclk_m2m_400_user_p,
+ MUX_SEL_GSCL, 4, 1),
+ MUX(GSCL_MOUT_ACLK_GSCL_FIMC_USER, "mout_aclk_gscl_fimc_user",
+ mout_aclk_gscl_fimc_user_p,
+ MUX_SEL_GSCL, 8, 1),
+ MUX(GSCL_MOUT_ACLK_CSIS, "mout_aclk_csis", mout_aclk_csis_p,
+ MUX_SEL_GSCL, 24, 1),
+};
+
+struct samsung_div_clock gscl_div_clks[] __initdata = {
+ DIV(GSCL_DOUT_PCLK_M2M_100, "dout_pclk_m2m_100",
+ "mout_aclk_m2m_400_user",
+ DIV_GSCL, 0, 3),
+ DIV(GSCL_DOUT_ACLK_CSIS_200, "dout_aclk_csis_200",
+ "mout_aclk_m2m_400_user",
+ DIV_GSCL, 4, 3),
+};
+
+struct samsung_gate_clock gscl_gate_clks[] __initdata = {
+ GATE(GSCL_SCLK_CSIS0_WRAP, "sclk_csis0_wrap", "dout_aclk_csis_200",
+ EN_SCLK_GSCL_FIMC, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(GSCL_SCLK_CSIS1_WRAP, "sclk_csis1_wrap", "dout_aclk_csis_200",
+ EN_SCLK_GSCL_FIMC, 1, CLK_SET_RATE_PARENT, 0),
+
+ GATE(GSCL_CLK_GSCL0, "clk_gscl0", "mout_aclk_gscl_333_user",
+ EN_IP_GSCL, 2, 0, 0),
+ GATE(GSCL_CLK_GSCL1, "clk_gscl1", "mout_aclk_gscl_333_user",
+ EN_IP_GSCL, 3, 0, 0),
+ GATE(GSCL_CLK_MSCL0, "clk_mscl0", "mout_aclk_gscl_333_user",
+ EN_IP_GSCL, 4, 0, 0),
+ GATE(GSCL_CLK_MSCL1, "clk_mscl1", "mout_aclk_gscl_333_user",
+ EN_IP_GSCL, 5, 0, 0),
+ GATE(GSCL_CLK_PIXEL_GSCL0, "clk_pixel_gscl0",
+ "mout_aclk_gscl_333_user",
+ EN_IP_GSCL, 8, 0, 0),
+ GATE(GSCL_CLK_PIXEL_GSCL1, "clk_pixel_gscl1",
+ "mout_aclk_gscl_333_user",
+ EN_IP_GSCL, 9, 0, 0),
+
+ GATE(GSCL_CLK_SMMU3_LITE_A, "clk_smmu3_lite_a",
+ "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 5, 0, 0),
+ GATE(GSCL_CLK_SMMU3_LITE_B, "clk_smmu3_lite_b",
+ "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 6, 0, 0),
+ GATE(GSCL_CLK_SMMU3_LITE_D, "clk_smmu3_lite_d",
+ "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 7, 0, 0),
+ GATE(GSCL_CLK_CSIS0, "clk_csis0", "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 8, 0, 0),
+ GATE(GSCL_CLK_CSIS1, "clk_csis1", "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 9, 0, 0),
+ GATE(GSCL_CLK_FIMC_LITE_A, "clk_fimc_lite_a",
+ "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 10, 0, 0),
+ GATE(GSCL_CLK_FIMC_LITE_B, "clk_fimc_lite_b",
+ "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 11, 0, 0),
+ GATE(GSCL_CLK_FIMC_LITE_D, "clk_fimc_lite_d",
+ "mout_aclk_gscl_fimc_user",
+ EN_IP_GSCL_FIMC, 12, 0, 0),
+
+ GATE(GSCL_CLK_SMMU3_GSCL0, "clk_smmu3_gscl0",
+ "mout_aclk_gscl_333_user",
+ EN_IP_GSCL_SECURE_SMMU_GSCL0, 17, 0, 0),
+ GATE(GSCL_CLK_SMMU3_GSCL1, "clk_smmu3_gscl1", "mout_aclk_gscl_333_user",
+ EN_IP_GSCL_SECURE_SMMU_GSCL1, 18, 0, 0),
+ GATE(GSCL_CLK_SMMU3_MSCL0, "clk_smmu3_mscl0",
+ "mout_aclk_m2m_400_user",
+ EN_IP_GSCL_SECURE_SMMU_MSCL0, 19, 0, 0),
+ GATE(GSCL_CLK_SMMU3_MSCL1, "clk_smmu3_mscl1",
+ "mout_aclk_m2m_400_user",
+ EN_IP_GSCL_SECURE_SMMU_MSCL1, 20, 0, 0),
+};
+
+static void __init exynos5260_clk_gscl_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = gscl_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(gscl_mux_clks);
+ cmu.div_clks = gscl_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(gscl_div_clks);
+ cmu.gate_clks = gscl_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(gscl_gate_clks);
+ cmu.nr_clk_ids = GSCL_NR_CLK;
+ cmu.clk_regs = gscl_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(gscl_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_gscl, "samsung,exynos5260-clock-gscl",
+ exynos5260_clk_gscl_init);
+
+
+/* CMU_ISP */
+
+static unsigned long isp_clk_regs[] __initdata = {
+ MUX_SEL_ISP0,
+ MUX_SEL_ISP1,
+ DIV_ISP,
+ EN_ACLK_ISP0,
+ EN_ACLK_ISP1,
+ EN_PCLK_ISP0,
+ EN_PCLK_ISP1,
+ EN_SCLK_ISP,
+ EN_IP_ISP0,
+ EN_IP_ISP1,
+};
+
+PNAME(mout_isp_400_user_p) = {"fin_pll", "dout_aclk_isp1_400"};
+PNAME(mout_isp_266_user_p) = {"fin_pll", "dout_aclk_isp1_266"};
+
+struct samsung_mux_clock isp_mux_clks[] __initdata = {
+ MUX(ISP_MOUT_ISP_266_USER, "mout_isp_266_user", mout_isp_266_user_p,
+ MUX_SEL_ISP0, 0, 1),
+ MUX(ISP_MOUT_ISP_400_USER, "mout_isp_400_user", mout_isp_400_user_p,
+ MUX_SEL_ISP0, 4, 1),
+};
+
+struct samsung_div_clock isp_div_clks[] __initdata = {
+ DIV(ISP_DOUT_PCLK_ISP_66, "dout_pclk_isp_66", "mout_kfc",
+ DIV_ISP, 0, 3),
+ DIV(ISP_DOUT_PCLK_ISP_133, "dout_pclk_isp_133", "mout_kfc",
+ DIV_ISP, 4, 4),
+ DIV(ISP_DOUT_CA5_ATCLKIN, "dout_ca5_atclkin", "mout_kfc",
+ DIV_ISP, 12, 3),
+ DIV(ISP_DOUT_CA5_PCLKDBG, "dout_ca5_pclkdbg", "mout_kfc",
+ DIV_ISP, 16, 4),
+ DIV(ISP_DOUT_SCLK_MPWM, "dout_sclk_mpwm", "mout_kfc", DIV_ISP, 20, 2),
+};
+
+struct samsung_gate_clock isp_gate_clks[] __initdata = {
+ GATE(ISP_CLK_GIC, "clk_isp_gic", "mout_aclk_isp1_266",
+ EN_IP_ISP0, 15, 0, 0),
+
+ GATE(ISP_CLK_CA5, "clk_isp_ca5", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 1, 0, 0),
+ GATE(ISP_CLK_FIMC_DRC, "clk_isp_fimc_drc", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 2, 0, 0),
+ GATE(ISP_CLK_FIMC_FD, "clk_isp_fimc_fd", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 3, 0, 0),
+ GATE(ISP_CLK_FIMC, "clk_isp_fimc", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 4, 0, 0),
+ GATE(ISP_CLK_FIMC_SCALERC, "clk_isp_fimc_scalerc",
+ "mout_aclk_isp1_266",
+ EN_IP_ISP1, 5, 0, 0),
+ GATE(ISP_CLK_FIMC_SCALERP, "clk_isp_fimc_scalerp",
+ "mout_aclk_isp1_266",
+ EN_IP_ISP1, 6, 0, 0),
+ GATE(ISP_CLK_I2C0, "clk_isp_i2c0", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 7, 0, 0),
+ GATE(ISP_CLK_I2C1, "clk_isp_i2c1", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 8, 0, 0),
+ GATE(ISP_CLK_MCUCTL, "clk_isp_mcuctl", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 9, 0, 0),
+ GATE(ISP_CLK_MPWM, "clk_isp_mpwm", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 10, 0, 0),
+ GATE(ISP_CLK_MTCADC, "clk_isp_mtcadc", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 11, 0, 0),
+ GATE(ISP_CLK_PWM, "clk_isp_pwm", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 14, 0, 0),
+ GATE(ISP_CLK_SMMU_DRC, "clk_smmu_drc", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 21, 0, 0),
+ GATE(ISP_CLK_SMMU_FD, "clk_smmu_fd", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 22, 0, 0),
+ GATE(ISP_CLK_SMMU_ISP, "clk_smmu_isp", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 23, 0, 0),
+ GATE(ISP_CLK_SMMU_ISPCX, "clk_smmu_ispcx", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 24, 0, 0),
+ GATE(ISP_CLK_SMMU_SCALERC, "clk_isp_smmu_scalerc",
+ "mout_aclk_isp1_266",
+ EN_IP_ISP1, 25, 0, 0),
+ GATE(ISP_CLK_SMMU_SCALERP, "clk_isp_smmu_scalerp",
+ "mout_aclk_isp1_266",
+ EN_IP_ISP1, 26, 0, 0),
+ GATE(ISP_CLK_SPI0, "clk_isp_spi0", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 27, 0, 0),
+ GATE(ISP_CLK_SPI1, "clk_isp_spi1", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 28, 0, 0),
+ GATE(ISP_CLK_WDT, "clk_isp_wdt", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 31, 0, 0),
+ GATE(ISP_CLK_UART, "clk_isp_uart", "mout_aclk_isp1_266",
+ EN_IP_ISP1, 30, 0, 0),
+
+ GATE(ISP_SCLK_UART_EXT, "sclk_isp_uart_ext", "fin_pll",
+ EN_SCLK_ISP, 7, CLK_SET_RATE_PARENT, 0),
+ GATE(ISP_SCLK_SPI1_EXT, "sclk_isp_spi1_ext", "fin_pll",
+ EN_SCLK_ISP, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(ISP_SCLK_SPI0_EXT, "sclk_isp_spi0_ext", "fin_pll",
+ EN_SCLK_ISP, 9, CLK_SET_RATE_PARENT, 0),
+};
+
+static void __init exynos5260_clk_isp_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = isp_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(isp_mux_clks);
+ cmu.div_clks = isp_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(isp_div_clks);
+ cmu.gate_clks = isp_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(isp_gate_clks);
+ cmu.nr_clk_ids = ISP_NR_CLK;
+ cmu.clk_regs = isp_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(isp_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_isp, "samsung,exynos5260-clock-isp",
+ exynos5260_clk_isp_init);
+
+
+/* CMU_KFC */
+
+static unsigned long kfc_clk_regs[] __initdata = {
+ KFC_PLL_LOCK,
+ KFC_PLL_CON0,
+ KFC_PLL_CON1,
+ KFC_PLL_FDET,
+ MUX_SEL_KFC0,
+ MUX_SEL_KFC2,
+ DIV_KFC,
+ DIV_KFC_PLL_FDET,
+ EN_ACLK_KFC,
+ EN_PCLK_KFC,
+ EN_SCLK_KFC,
+ EN_IP_KFC,
+};
+
+PNAME(mout_kfc_pll_p) = {"fin_pll", "fout_kfc_pll"};
+PNAME(mout_kfc_p) = {"mout_kfc_pll", "dout_media_pll"};
+
+struct samsung_mux_clock kfc_mux_clks[] __initdata = {
+ MUX(KFC_MOUT_KFC_PLL, "mout_kfc_pll", mout_kfc_pll_p,
+ MUX_SEL_KFC0, 0, 1),
+ MUX(KFC_MOUT_KFC, "mout_kfc", mout_kfc_p, MUX_SEL_KFC2, 0, 1),
+};
+
+struct samsung_div_clock kfc_div_clks[] __initdata = {
+ DIV(KFC_DOUT_KFC1, "dout_kfc1", "mout_kfc", DIV_KFC, 0, 3),
+ DIV(KFC_DOUT_KFC2, "dout_kfc2", "dout_kfc1", DIV_KFC, 4, 3),
+ DIV(KFC_DOUT_KFC_ATCLK, "dout_kfc_atclk", "dout_kfc2", DIV_KFC, 8, 3),
+ DIV(KFC_DOUT_KFC_PCLK_DBG, "dout_kfc_pclk_dbg", "dout_kfc2",
+ DIV_KFC, 12, 3),
+ DIV(KFC_DOUT_ACLK_KFC, "dout_aclk_kfc", "dout_kfc2", DIV_KFC, 16, 3),
+ DIV(KFC_DOUT_PCLK_KFC, "dout_pclk_kfc", "dout_kfc2", DIV_KFC, 20, 3),
+ DIV(KFC_DOUT_KFC_PLL, "dout_kfc_pll", "mout_kfc", DIV_KFC, 24, 3),
+};
+
+static struct samsung_pll_clock kfc_pll_clks[] __initdata = {
+ PLL(pll_2550xx, KFC_FOUT_KFC_PLL, "fout_kfc_pll", "fin_pll",
+ KFC_PLL_LOCK, KFC_PLL_CON0,
+ pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_kfc_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.pll_clks = kfc_pll_clks;
+ cmu.nr_pll_clks = ARRAY_SIZE(kfc_pll_clks);
+ cmu.mux_clks = kfc_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(kfc_mux_clks);
+ cmu.div_clks = kfc_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(kfc_div_clks);
+ cmu.nr_clk_ids = KFC_NR_CLK;
+ cmu.clk_regs = kfc_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(kfc_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_kfc, "samsung,exynos5260-clock-kfc",
+ exynos5260_clk_kfc_init);
+
+
+/* CMU_MFC */
+
+static unsigned long mfc_clk_regs[] __initdata = {
+ MUX_SEL_MFC,
+ DIV_MFC,
+ EN_ACLK_MFC,
+ EN_ACLK_SECURE_SMMU2_MFC,
+ EN_PCLK_MFC,
+ EN_PCLK_SECURE_SMMU2_MFC,
+ EN_IP_MFC,
+ EN_IP_MFC_SECURE_SMMU2_MFC,
+};
+
+PNAME(mout_aclk_mfc_333_user_p) = {"fin_pll", "dout_aclk_mfc_333"};
+
+struct samsung_mux_clock mfc_mux_clks[] __initdata = {
+ MUX(MFC_MOUT_ACLK_MFC_333_USER, "mout_aclk_mfc_333_user",
+ mout_aclk_mfc_333_user_p,
+ MUX_SEL_MFC, 0, 1),
+};
+
+struct samsung_div_clock mfc_div_clks[] __initdata = {
+ DIV(MFC_DOUT_PCLK_MFC_83, "dout_pclk_mfc_83", "mout_aclk_mfc_333_user",
+ DIV_MFC, 0, 3),
+};
+
+struct samsung_gate_clock mfc_gate_clks[] __initdata = {
+ GATE(MFC_CLK_MFC, "clk_mfc", "mout_aclk_mfc_333_user",
+ EN_IP_MFC, 1, 0, 0),
+ GATE(MFC_CLK_SMMU2_MFCM0, "clk_smmu2_mfcm0", "mout_aclk_mfc_333_user",
+ EN_IP_MFC_SECURE_SMMU2_MFC, 6, 0, 0),
+ GATE(MFC_CLK_SMMU2_MFCM1, "clk_smmu2_mfcm1", "mout_aclk_mfc_333_user",
+ EN_IP_MFC_SECURE_SMMU2_MFC, 7, 0, 0),
+};
+
+static void __init exynos5260_clk_mfc_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = mfc_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(mfc_mux_clks);
+ cmu.div_clks = mfc_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(mfc_div_clks);
+ cmu.gate_clks = mfc_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(mfc_gate_clks);
+ cmu.nr_clk_ids = MFC_NR_CLK;
+ cmu.clk_regs = mfc_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(mfc_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_mfc, "samsung,exynos5260-clock-mfc",
+ exynos5260_clk_mfc_init);
+
+
+/* CMU_MIF */
+
+static unsigned long mif_clk_regs[] __initdata = {
+ MEM_PLL_LOCK,
+ BUS_PLL_LOCK,
+ MEDIA_PLL_LOCK,
+ MEM_PLL_CON0,
+ MEM_PLL_CON1,
+ MEM_PLL_FDET,
+ BUS_PLL_CON0,
+ BUS_PLL_CON1,
+ BUS_PLL_FDET,
+ MEDIA_PLL_CON0,
+ MEDIA_PLL_CON1,
+ MEDIA_PLL_FDET,
+ MUX_SEL_MIF,
+ DIV_MIF,
+ DIV_MIF_PLL_FDET,
+ EN_ACLK_MIF,
+ EN_ACLK_MIF_SECURE_DREX1_TZ,
+ EN_ACLK_MIF_SECURE_DREX0_TZ,
+ EN_ACLK_MIF_SECURE_INTMEM,
+ EN_PCLK_MIF,
+ EN_PCLK_MIF_SECURE_MONOCNT,
+ EN_PCLK_MIF_SECURE_RTC_APBIF,
+ EN_PCLK_MIF_SECURE_DREX1_TZ,
+ EN_PCLK_MIF_SECURE_DREX0_TZ,
+ EN_SCLK_MIF,
+ EN_IP_MIF,
+ EN_IP_MIF_SECURE_MONOCNT,
+ EN_IP_MIF_SECURE_RTC_APBIF,
+ EN_IP_MIF_SECURE_DREX1_TZ,
+ EN_IP_MIF_SECURE_DREX0_TZ,
+ EN_IP_MIF_SECURE_INTEMEM,
+};
+
+PNAME(mout_mem_pll_p) = {"fin_pll", "fout_mem_pll"};
+PNAME(mout_bus_pll_p) = {"fin_pll", "fout_bus_pll"};
+PNAME(mout_media_pll_p) = {"fin_pll", "fout_media_pll"};
+PNAME(mout_mif_drex_p) = {"dout_mem_pll", "dout_bus_pll"};
+PNAME(mout_mif_drex2x_p) = {"dout_mem_pll", "dout_bus_pll"};
+PNAME(mout_clkm_phy_p) = {"mout_mif_drex", "dout_media_pll"};
+PNAME(mout_clk2x_phy_p) = {"mout_mif_drex2x", "dout_media_pll"};
+
+struct samsung_mux_clock mif_mux_clks[] __initdata = {
+ MUX(MIF_MOUT_MEM_PLL, "mout_mem_pll", mout_mem_pll_p,
+ MUX_SEL_MIF, 0, 1),
+ MUX(MIF_MOUT_BUS_PLL, "mout_bus_pll", mout_bus_pll_p,
+ MUX_SEL_MIF, 4, 1),
+ MUX(MIF_MOUT_MEDIA_PLL, "mout_media_pll", mout_media_pll_p,
+ MUX_SEL_MIF, 8, 1),
+ MUX(MIF_MOUT_MIF_DREX, "mout_mif_drex", mout_mif_drex_p,
+ MUX_SEL_MIF, 12, 1),
+ MUX(MIF_MOUT_CLKM_PHY, "mout_clkm_phy", mout_clkm_phy_p,
+ MUX_SEL_MIF, 16, 1),
+ MUX(MIF_MOUT_MIF_DREX2X, "mout_mif_drex2x", mout_mif_drex2x_p,
+ MUX_SEL_MIF, 20, 1),
+ MUX(MIF_MOUT_CLK2X_PHY, "mout_clk2x_phy", mout_clk2x_phy_p,
+ MUX_SEL_MIF, 24, 1),
+};
+
+struct samsung_div_clock mif_div_clks[] __initdata = {
+ DIV(MIF_DOUT_MEDIA_PLL, "dout_media_pll", "mout_media_pll",
+ DIV_MIF, 0, 3),
+ DIV(MIF_DOUT_MEM_PLL, "dout_mem_pll", "mout_mem_pll",
+ DIV_MIF, 4, 3),
+ DIV(MIF_DOUT_BUS_PLL, "dout_bus_pll", "mout_bus_pll",
+ DIV_MIF, 8, 3),
+ DIV(MIF_DOUT_CLKM_PHY, "dout_clkm_phy", "mout_clkm_phy",
+ DIV_MIF, 12, 3),
+ DIV(MIF_DOUT_CLK2X_PHY, "dout_clk2x_phy", "mout_clk2x_phy",
+ DIV_MIF, 16, 4),
+ DIV(MIF_DOUT_ACLK_MIF_466, "dout_aclk_mif_466", "dout_clk2x_phy",
+ DIV_MIF, 20, 3),
+ DIV(MIF_DOUT_ACLK_BUS_200, "dout_aclk_bus_200", "dout_bus_pll",
+ DIV_MIF, 24, 3),
+ DIV(MIF_DOUT_ACLK_BUS_100, "dout_aclk_bus_100", "dout_bus_pll",
+ DIV_MIF, 28, 4),
+};
+
+struct samsung_gate_clock mif_gate_clks[] __initdata = {
+ GATE(MIF_CLK_LPDDR3PHY_WRAP0, "clk_lpddr3phy_wrap0", "dout_clk2x_phy",
+ EN_IP_MIF, 12, CLK_IGNORE_UNUSED, 0),
+ GATE(MIF_CLK_LPDDR3PHY_WRAP1, "clk_lpddr3phy_wrap1", "dout_clk2x_phy",
+ EN_IP_MIF, 13, CLK_IGNORE_UNUSED, 0),
+
+ GATE(MIF_CLK_MONOCNT, "clk_monocnt", "dout_aclk_bus_100",
+ EN_IP_MIF_SECURE_MONOCNT, 22,
+ CLK_IGNORE_UNUSED, 0),
+
+ GATE(MIF_CLK_MIF_RTC, "clk_mif_rtc", "dout_aclk_bus_100",
+ EN_IP_MIF_SECURE_RTC_APBIF, 23,
+ CLK_IGNORE_UNUSED, 0),
+
+ GATE(MIF_CLK_DREX1, "clk_drex1", "dout_aclk_mif_466",
+ EN_IP_MIF_SECURE_DREX1_TZ, 9,
+ CLK_IGNORE_UNUSED, 0),
+
+ GATE(MIF_CLK_DREX0, "clk_drex0", "dout_aclk_mif_466",
+ EN_IP_MIF_SECURE_DREX0_TZ, 9,
+ CLK_IGNORE_UNUSED, 0),
+
+ GATE(MIF_CLK_INTMEM, "clk_intmem", "dout_aclk_bus_200",
+ EN_IP_MIF_SECURE_INTEMEM, 11,
+ CLK_IGNORE_UNUSED, 0),
+
+ GATE(MIF_SCLK_LPDDR3PHY_WRAP_U0, "sclk_lpddr3phy_wrap_u0",
+ "dout_clkm_phy", EN_SCLK_MIF, 0,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+ GATE(MIF_SCLK_LPDDR3PHY_WRAP_U1, "sclk_lpddr3phy_wrap_u1",
+ "dout_clkm_phy", EN_SCLK_MIF, 1,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+};
+
+static struct samsung_pll_clock mif_pll_clks[] __initdata = {
+ PLL(pll_2550xx, MIF_FOUT_MEM_PLL, "fout_mem_pll", "fin_pll",
+ MEM_PLL_LOCK, MEM_PLL_CON0,
+ pll2550_24mhz_tbl),
+ PLL(pll_2550xx, MIF_FOUT_BUS_PLL, "fout_bus_pll", "fin_pll",
+ BUS_PLL_LOCK, BUS_PLL_CON0,
+ pll2550_24mhz_tbl),
+ PLL(pll_2550xx, MIF_FOUT_MEDIA_PLL, "fout_media_pll", "fin_pll",
+ MEDIA_PLL_LOCK, MEDIA_PLL_CON0,
+ pll2550_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_mif_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.pll_clks = mif_pll_clks;
+ cmu.nr_pll_clks = ARRAY_SIZE(mif_pll_clks);
+ cmu.mux_clks = mif_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(mif_mux_clks);
+ cmu.div_clks = mif_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(mif_div_clks);
+ cmu.gate_clks = mif_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(mif_gate_clks);
+ cmu.nr_clk_ids = MIF_NR_CLK;
+ cmu.clk_regs = mif_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(mif_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_mif, "samsung,exynos5260-clock-mif",
+ exynos5260_clk_mif_init);
+
+
+/* CMU_PERI */
+
+static unsigned long peri_clk_regs[] __initdata = {
+ MUX_SEL_PERI,
+ MUX_SEL_PERI1,
+ DIV_PERI,
+ EN_PCLK_PERI0,
+ EN_PCLK_PERI1,
+ EN_PCLK_PERI2,
+ EN_PCLK_PERI3,
+ EN_PCLK_PERI_SECURE_CHIPID,
+ EN_PCLK_PERI_SECURE_PROVKEY0,
+ EN_PCLK_PERI_SECURE_PROVKEY1,
+ EN_PCLK_PERI_SECURE_SECKEY,
+ EN_PCLK_PERI_SECURE_ANTIRBKCNT,
+ EN_PCLK_PERI_SECURE_TOP_RTC,
+ EN_PCLK_PERI_SECURE_TZPC,
+ EN_SCLK_PERI,
+ EN_SCLK_PERI_SECURE_TOP_RTC,
+ EN_IP_PERI0,
+ EN_IP_PERI1,
+ EN_IP_PERI2,
+ EN_IP_PERI_SECURE_CHIPID,
+ EN_IP_PERI_SECURE_PROVKEY0,
+ EN_IP_PERI_SECURE_PROVKEY1,
+ EN_IP_PERI_SECURE_SECKEY,
+ EN_IP_PERI_SECURE_ANTIRBKCNT,
+ EN_IP_PERI_SECURE_TOP_RTC,
+ EN_IP_PERI_SECURE_TZPC,
+};
+
+PNAME(mout_sclk_pcm_p) = {"ioclk_pcm_extclk", "fin_pll", "dout_aclk_peri_aud",
+ "phyclk_hdmi_phy_ref_cko"};
+PNAME(mout_sclk_i2scod_p) = {"ioclk_i2s_cdclk", "fin_pll", "dout_aclk_peri_aud",
+ "phyclk_hdmi_phy_ref_cko"};
+PNAME(mout_sclk_spdif_p) = {"ioclk_spdif_extclk", "fin_pll",
+ "dout_aclk_peri_aud", "phyclk_hdmi_phy_ref_cko"};
+
+struct samsung_mux_clock peri_mux_clks[] __initdata = {
+ MUX(PERI_MOUT_SCLK_PCM, "mout_sclk_pcm", mout_sclk_pcm_p,
+ MUX_SEL_PERI1, 4, 2),
+ MUX(PERI_MOUT_SCLK_I2SCOD, "mout_sclk_i2scod", mout_sclk_i2scod_p,
+ MUX_SEL_PERI1, 12, 2),
+ MUX(PERI_MOUT_SCLK_SPDIF, "mout_sclk_spdif", mout_sclk_spdif_p,
+ MUX_SEL_PERI1, 20, 2),
+};
+
+struct samsung_div_clock peri_div_clks[] __initdata = {
+ DIV(PERI_DOUT_PCM, "dout_pcm", "mout_sclk_pcm", DIV_PERI, 0, 8),
+ DIV(PERI_DOUT_I2S, "dout_i2s", "mout_sclk_i2scod", DIV_PERI, 8, 6),
+};
+
+struct samsung_gate_clock peri_gate_clks[] __initdata = {
+ GATE(PERI_SCLK_PCM1, "sclk_pcm1", "dout_pcm", EN_SCLK_PERI, 0,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_I2S, "sclk_i2s", "dout_i2s", EN_SCLK_PERI, 1,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_SPDIF, "sclk_spdif", "dout_sclk_peri_spi0_b",
+ EN_SCLK_PERI, 2, CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_SPI0, "sclk_spi0", "dout_sclk_peri_spi0_b",
+ EN_SCLK_PERI, 7, CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_SPI1, "sclk_spi1", "dout_sclk_peri_spi1_b",
+ EN_SCLK_PERI, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_SPI2, "sclk_spi2", "dout_sclk_peri_spi2_b",
+ EN_SCLK_PERI, 9, CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_UART0, "sclk_uart0", "dout_sclk_peri_uart0",
+ EN_SCLK_PERI, 10, CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_UART1, "sclk_uart1", "dout_sclk_peri_uart1",
+ EN_SCLK_PERI, 11, CLK_SET_RATE_PARENT, 0),
+ GATE(PERI_SCLK_UART2, "sclk_uart2", "dout_sclk_peri_uart2",
+ EN_SCLK_PERI, 12, CLK_SET_RATE_PARENT, 0),
+
+ GATE(PERI_CLK_ABB, "clk_abb", "dout_aclk_peri_66",
+ EN_IP_PERI0, 1, 0, 0),
+ GATE(PERI_CLK_EFUSE_WRITER, "clk_efuse_writer", "dout_aclk_peri_66",
+ EN_IP_PERI0, 5, 0, 0),
+ GATE(PERI_CLK_HDMICEC, "clk_hdmicec", "dout_aclk_peri_66",
+ EN_IP_PERI0, 6, 0, 0),
+ GATE(PERI_CLK_I2C10, "clk_i2c10", "dout_aclk_peri_66",
+ EN_IP_PERI0, 7, 0, 0),
+ GATE(PERI_CLK_I2C11, "clk_i2c11", "dout_aclk_peri_66",
+ EN_IP_PERI0, 8, 0, 0),
+ GATE(PERI_CLK_I2C8, "clk_i2c8", "dout_aclk_peri_66",
+ EN_IP_PERI0, 9, 0, 0),
+ GATE(PERI_CLK_I2C9, "clk_i2c9", "dout_aclk_peri_66",
+ EN_IP_PERI0, 10, 0, 0),
+ GATE(PERI_CLK_I2C4, "clk_i2c4", "dout_aclk_peri_66",
+ EN_IP_PERI0, 11, 0, 0),
+ GATE(PERI_CLK_I2C5, "clk_i2c5", "dout_aclk_peri_66",
+ EN_IP_PERI0, 12, 0, 0),
+ GATE(PERI_CLK_I2C6, "clk_i2c6", "dout_aclk_peri_66",
+ EN_IP_PERI0, 13, 0, 0),
+ GATE(PERI_CLK_I2C7, "clk_i2c7", "dout_aclk_peri_66",
+ EN_IP_PERI0, 14, 0, 0),
+ GATE(PERI_CLK_I2CHDMI, "clk_i2chdmi", "dout_aclk_peri_66",
+ EN_IP_PERI0, 15, 0, 0),
+ GATE(PERI_CLK_I2S, "clk_peri_i2s", "dout_aclk_peri_66",
+ EN_IP_PERI0, 16, 0, 0),
+ GATE(PERI_CLK_MCT, "clk_mct", "dout_aclk_peri_66",
+ EN_IP_PERI0, 17, 0, 0),
+ GATE(PERI_CLK_PCM, "clk_peri_pcm", "dout_aclk_peri_66",
+ EN_IP_PERI0, 18, 0, 0),
+ GATE(PERI_CLK_HSIC0, "clk_hsic0", "dout_aclk_peri_66",
+ EN_IP_PERI0, 20, 0, 0),
+ GATE(PERI_CLK_HSIC1, "clk_hsic1", "dout_aclk_peri_66",
+ EN_IP_PERI0, 21, 0, 0),
+ GATE(PERI_CLK_HSIC2, "clk_hsic2", "dout_aclk_peri_66",
+ EN_IP_PERI0, 22, 0, 0),
+ GATE(PERI_CLK_HSIC3, "clk_hsic3", "dout_aclk_peri_66",
+ EN_IP_PERI0, 23, 0, 0),
+ GATE(PERI_CLK_WDT_EGL, "clk_wdt_egl", "dout_aclk_peri_66",
+ EN_IP_PERI0, 24, 0, 0),
+ GATE(PERI_CLK_WDT_KFC, "clk_wdt_kfc", "dout_aclk_peri_66",
+ EN_IP_PERI0, 25, 0, 0),
+
+ GATE(PERI_CLK_UART4, "clk_uart4", "dout_aclk_peri_66",
+ EN_IP_PERI2, 0, 0, 0),
+ GATE(PERI_CLK_PWM, "clk_pwm", "dout_aclk_peri_66",
+ EN_IP_PERI2, 3, 0, 0),
+ GATE(PERI_CLK_SPDIF, "clk_spdif", "dout_aclk_peri_66",
+ EN_IP_PERI2, 6, 0, 0),
+ GATE(PERI_CLK_SPI0, "clk_spi0", "dout_aclk_peri_66",
+ EN_IP_PERI2, 7, 0, 0),
+ GATE(PERI_CLK_SPI1, "clk_spi1", "dout_aclk_peri_66",
+ EN_IP_PERI2, 8, 0, 0),
+ GATE(PERI_CLK_SPI2, "clk_spi2", "dout_aclk_peri_66",
+ EN_IP_PERI2, 9, 0, 0),
+ GATE(PERI_CLK_TMU0, "clk_tmu0", "dout_aclk_peri_66",
+ EN_IP_PERI2, 10, 0, 0),
+ GATE(PERI_CLK_TMU1, "clk_tmu1", "dout_aclk_peri_66",
+ EN_IP_PERI2, 11, 0, 0),
+ GATE(PERI_CLK_TMU2, "clk_tmu2", "dout_aclk_peri_66",
+ EN_IP_PERI2, 12, 0, 0),
+ GATE(PERI_CLK_TMU3, "clk_tmu3", "dout_aclk_peri_66",
+ EN_IP_PERI2, 13, 0, 0),
+ GATE(PERI_CLK_TMU4, "clk_tmu4", "dout_aclk_peri_66",
+ EN_IP_PERI2, 14, 0, 0),
+ GATE(PERI_CLK_ADC, "clk_adc", "dout_aclk_peri_66",
+ EN_IP_PERI2, 18, 0, 0),
+ GATE(PERI_CLK_UART0, "clk_uart0", "dout_aclk_peri_66",
+ EN_IP_PERI2, 19, 0, 0),
+ GATE(PERI_CLK_UART1, "clk_uart1", "dout_aclk_peri_66",
+ EN_IP_PERI2, 20, 0, 0),
+ GATE(PERI_CLK_UART2, "clk_uart2", "dout_aclk_peri_66",
+ EN_IP_PERI2, 21, 0, 0),
+
+ GATE(PERI_CLK_CHIPID, "clk_chipid", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_CHIPID, 2, 0, 0),
+
+ GATE(PERI_CLK_PROVKEY0, "clk_provkey0", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_PROVKEY0, 1, 0, 0),
+
+ GATE(PERI_CLK_PROVKEY1, "clk_provkey1", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_PROVKEY1, 2, 0, 0),
+
+ GATE(PERI_CLK_SECKEY, "clk_seckey", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_SECKEY, 5, 0, 0),
+
+ GATE(PERI_CLK_TOP_RTC, "clk_top_rtc", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TOP_RTC, 5, 0, 0),
+
+ GATE(PERI_CLK_TZPC0, "clk_tzpc0", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 10, 0, 0),
+ GATE(PERI_CLK_TZPC1, "clk_tzpc1", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 11, 0, 0),
+ GATE(PERI_CLK_TZPC2, "clk_tzpc2", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 12, 0, 0),
+ GATE(PERI_CLK_TZPC3, "clk_tzpc3", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 13, 0, 0),
+ GATE(PERI_CLK_TZPC4, "clk_tzpc4", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 14, 0, 0),
+ GATE(PERI_CLK_TZPC5, "clk_tzpc5", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 15, 0, 0),
+ GATE(PERI_CLK_TZPC6, "clk_tzpc6", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 16, 0, 0),
+ GATE(PERI_CLK_TZPC7, "clk_tzpc7", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 17, 0, 0),
+ GATE(PERI_CLK_TZPC8, "clk_tzpc8", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 18, 0, 0),
+ GATE(PERI_CLK_TZPC9, "clk_tzpc9", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 19, 0, 0),
+ GATE(PERI_CLK_TZPC10, "clk_tzpc10", "dout_aclk_peri_66",
+ EN_IP_PERI_SECURE_TZPC, 20, 0, 0),
+};
+
+static void __init exynos5260_clk_peri_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.mux_clks = peri_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(peri_mux_clks);
+ cmu.div_clks = peri_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(peri_div_clks);
+ cmu.gate_clks = peri_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(peri_gate_clks);
+ cmu.nr_clk_ids = PERI_NR_CLK;
+ cmu.clk_regs = peri_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(peri_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_peri, "samsung,exynos5260-clock-peri",
+ exynos5260_clk_peri_init);
+
+
+/* CMU_TOP */
+
+static unsigned long top_clk_regs[] __initdata = {
+ DISP_PLL_LOCK,
+ AUD_PLL_LOCK,
+ DISP_PLL_CON0,
+ DISP_PLL_CON1,
+ DISP_PLL_FDET,
+ AUD_PLL_CON0,
+ AUD_PLL_CON1,
+ AUD_PLL_CON2,
+ AUD_PLL_FDET,
+ MUX_SEL_TOP_PLL0,
+ MUX_SEL_TOP_MFC,
+ MUX_SEL_TOP_G2D,
+ MUX_SEL_TOP_GSCL,
+ MUX_SEL_TOP_ISP10,
+ MUX_SEL_TOP_ISP11,
+ MUX_SEL_TOP_DISP0,
+ MUX_SEL_TOP_DISP1,
+ MUX_SEL_TOP_BUS,
+ MUX_SEL_TOP_PERI0,
+ MUX_SEL_TOP_PERI1,
+ MUX_SEL_TOP_FSYS,
+ DIV_TOP_G2D_MFC,
+ DIV_TOP_GSCL_ISP0,
+ DIV_TOP_ISP10,
+ DIV_TOP_ISP11,
+ DIV_TOP_DISP,
+ DIV_TOP_BUS,
+ DIV_TOP_PERI0,
+ DIV_TOP_PERI1,
+ DIV_TOP_PERI2,
+ DIV_TOP_FSYS0,
+ DIV_TOP_FSYS1,
+ DIV_TOP_HPM,
+ DIV_TOP_PLL_FDET,
+ EN_ACLK_TOP,
+ EN_SCLK_TOP,
+ EN_IP_TOP,
+};
+
+/* fixed rate clocks generated inside the soc */
+struct samsung_fixed_rate_clock fixed_rate_clks[] __initdata = {
+ FRATE(PHYCLK_DPTX_PHY_CH3_TXD_CLK, "phyclk_dptx_phy_ch3_txd_clk", NULL,
+ CLK_IS_ROOT, 270000000),
+ FRATE(PHYCLK_DPTX_PHY_CH2_TXD_CLK, "phyclk_dptx_phy_ch2_txd_clk", NULL,
+ CLK_IS_ROOT, 270000000),
+ FRATE(PHYCLK_DPTX_PHY_CH1_TXD_CLK, "phyclk_dptx_phy_ch1_txd_clk", NULL,
+ CLK_IS_ROOT, 270000000),
+ FRATE(PHYCLK_DPTX_PHY_CH0_TXD_CLK, "phyclk_dptx_phy_ch0_txd_clk", NULL,
+ CLK_IS_ROOT, 270000000),
+ FRATE(phyclk_hdmi_phy_tmds_clko, "phyclk_hdmi_phy_tmds_clko", NULL,
+ CLK_IS_ROOT, 250000000),
+ FRATE(PHYCLK_HDMI_PHY_PIXEL_CLKO, "phyclk_hdmi_phy_pixel_clko", NULL,
+ CLK_IS_ROOT, 1660000000),
+ FRATE(PHYCLK_HDMI_LINK_O_TMDS_CLKHI, "phyclk_hdmi_link_o_tmds_clkhi",
+ NULL, CLK_IS_ROOT, 125000000),
+ FRATE(PHYCLK_MIPI_DPHY_4L_M_TXBYTECLKHS,
+ "phyclk_mipi_dphy_4l_m_txbyteclkhs" , NULL,
+ CLK_IS_ROOT, 187500000),
+ FRATE(PHYCLK_DPTX_PHY_O_REF_CLK_24M, "phyclk_dptx_phy_o_ref_clk_24m",
+ NULL, CLK_IS_ROOT, 24000000),
+ FRATE(PHYCLK_DPTX_PHY_CLK_DIV2, "phyclk_dptx_phy_clk_div2", NULL,
+ CLK_IS_ROOT, 135000000),
+ FRATE(PHYCLK_MIPI_DPHY_4L_M_RXCLKESC0,
+ "phyclk_mipi_dphy_4l_m_rxclkesc0", NULL,
+ CLK_IS_ROOT, 20000000),
+ FRATE(PHYCLK_USBHOST20_PHY_PHYCLOCK, "phyclk_usbhost20_phy_phyclock",
+ NULL, CLK_IS_ROOT, 60000000),
+ FRATE(PHYCLK_USBHOST20_PHY_FREECLK, "phyclk_usbhost20_phy_freeclk",
+ NULL, CLK_IS_ROOT, 60000000),
+ FRATE(PHYCLK_USBHOST20_PHY_CLK48MOHCI,
+ "phyclk_usbhost20_phy_clk48mohci",
+ NULL, CLK_IS_ROOT, 48000000),
+ FRATE(PHYCLK_USBDRD30_UDRD30_PIPE_PCLK,
+ "phyclk_usbdrd30_udrd30_pipe_pclk", NULL,
+ CLK_IS_ROOT, 125000000),
+ FRATE(PHYCLK_USBDRD30_UDRD30_PHYCLOCK,
+ "phyclk_usbdrd30_udrd30_phyclock", NULL,
+ CLK_IS_ROOT, 60000000),
+};
+
+PNAME(mout_memtop_pll_user_p) = {"fin_pll", "dout_mem_pll"};
+PNAME(mout_bustop_pll_user_p) = {"fin_pll", "dout_bus_pll"};
+PNAME(mout_mediatop_pll_user_p) = {"fin_pll", "dout_media_pll"};
+PNAME(mout_audtop_pll_user_p) = {"fin_pll", "mout_aud_pll"};
+PNAME(mout_aud_pll_p) = {"fin_pll", "fout_aud_pll"};
+PNAME(mout_disp_pll_p) = {"fin_pll", "fout_disp_pll"};
+PNAME(mout_mfc_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_mfc_333_p) = {"mout_mediatop_pll_user", "mout_mfc_bustop_333"};
+PNAME(mout_g2d_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_g2d_333_p) = {"mout_mediatop_pll_user", "mout_g2d_bustop_333"};
+PNAME(mout_gscl_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_gscl_333_p) = {"mout_mediatop_pll_user",
+ "mout_gscl_bustop_333"};
+PNAME(mout_m2m_mediatop_400_p) = {"mout_mediatop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_gscl_400_p) = {"mout_bustop_pll_user",
+ "mout_m2m_mediatop_400"};
+PNAME(mout_gscl_bustop_fimc_p) = {"mout_bustop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_gscl_fimc_p) = {"mout_mediatop_pll_user",
+ "mout_gscl_bustop_fimc"};
+PNAME(mout_isp1_media_266_p) = {"mout_mediatop_pll_user",
+ "mout_memtop_pll_user"};
+PNAME(mout_aclk_isp1_266_p) = {"mout_bustop_pll_user", "mout_isp1_media_266"};
+PNAME(mout_isp1_media_400_p) = {"mout_mediatop_pll_user", "mout_disp_pll"};
+PNAME(mout_aclk_isp1_400_p) = {"mout_bustop_pll_user", "mout_isp1_media_400"};
+PNAME(mout_sclk_isp_spi_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_isp_uart_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_isp_sensor_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_disp_disp_333_p) = {"mout_disp_pll", "mout_bustop_pll_user"};
+PNAME(mout_aclk_disp_333_p) = {"mout_mediatop_pll_user", "mout_disp_disp_333"};
+PNAME(mout_disp_disp_222_p) = {"mout_disp_pll", "mout_bustop_pll_user"};
+PNAME(mout_aclk_disp_222_p) = {"mout_mediatop_pll_user", "mout_disp_disp_222"};
+PNAME(mout_disp_media_pixel_p) = {"mout_mediatop_pll_user",
+ "mout_bustop_pll_user"};
+PNAME(mout_sclk_disp_pixel_p) = {"mout_disp_pll", "mout_disp_media_pixel"};
+PNAME(mout_bus_bustop_400_p) = {"mout_bustop_pll_user", "mout_memtop_pll_user"};
+PNAME(mout_bus_bustop_100_p) = {"mout_bustop_pll_user", "mout_memtop_pll_user"};
+PNAME(mout_sclk_peri_spi_clk_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_peri_uart_uclk_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_fsys_usb_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_fsys_mmc_sdclkin_a_p) = {"fin_pll", "mout_bustop_pll_user"};
+PNAME(mout_sclk_fsys_mmc0_sdclkin_b_p) = {"mout_sclk_fsys_mmc0_sdclkin_a",
+ "mout_mediatop_pll_user"};
+PNAME(mout_sclk_fsys_mmc1_sdclkin_b_p) = {"mout_sclk_fsys_mmc1_sdclkin_a",
+ "mout_mediatop_pll_user"};
+PNAME(mout_sclk_fsys_mmc2_sdclkin_b_p) = {"mout_sclk_fsys_mmc2_sdclkin_a",
+ "mout_mediatop_pll_user"};
+
+struct samsung_mux_clock top_mux_clks[] __initdata = {
+ MUX(TOP_MOUT_MEDIATOP_PLL_USER, "mout_mediatop_pll_user",
+ mout_mediatop_pll_user_p,
+ MUX_SEL_TOP_PLL0, 0, 1),
+ MUX(TOP_MOUT_MEMTOP_PLL_USER, "mout_memtop_pll_user",
+ mout_memtop_pll_user_p,
+ MUX_SEL_TOP_PLL0, 4, 1),
+ MUX(TOP_MOUT_BUSTOP_PLL_USER, "mout_bustop_pll_user",
+ mout_bustop_pll_user_p,
+ MUX_SEL_TOP_PLL0, 8, 1),
+ MUX(TOP_MOUT_DISP_PLL, "mout_disp_pll", mout_disp_pll_p,
+ MUX_SEL_TOP_PLL0, 12, 1),
+ MUX(TOP_MOUT_AUD_PLL, "mout_aud_pll", mout_aud_pll_p,
+ MUX_SEL_TOP_PLL0, 16, 1),
+ MUX(TOP_MOUT_AUDTOP_PLL_USER, "mout_audtop_pll_user",
+ mout_audtop_pll_user_p,
+ MUX_SEL_TOP_PLL0, 24, 1),
+
+ MUX(TOP_MOUT_DISP_DISP_333, "mout_disp_disp_333", mout_disp_disp_333_p,
+ MUX_SEL_TOP_DISP0, 0, 1),
+ MUX(TOP_MOUT_ACLK_DISP_333, "mout_aclk_disp_333", mout_aclk_disp_333_p,
+ MUX_SEL_TOP_DISP0, 8, 1),
+ MUX(TOP_MOUT_DISP_DISP_222, "mout_disp_disp_222", mout_disp_disp_222_p,
+ MUX_SEL_TOP_DISP0, 12, 1),
+ MUX(TOP_MOUT_ACLK_DISP_222, "mout_aclk_disp_222", mout_aclk_disp_222_p,
+ MUX_SEL_TOP_DISP0, 20, 1),
+
+ MUX(TOP_MOUT_FIMD1, "mout_sclk_disp_pixel", mout_sclk_disp_pixel_p,
+ MUX_SEL_TOP_DISP1, 0, 1),
+ MUX(TOP_MOUT_DISP_MEDIA_PIXEL, "mout_disp_media_pixel",
+ mout_disp_media_pixel_p,
+ MUX_SEL_TOP_DISP1, 8, 1),
+
+ MUX(TOP_MOUT_SCLK_PERI_SPI2_CLK, "mout_sclk_peri_spi2_clk",
+ mout_sclk_peri_spi_clk_p,
+ MUX_SEL_TOP_PERI1, 0, 1),
+ MUX(TOP_MOUT_SCLK_PERI_SPI1_CLK, "mout_sclk_peri_spi1_clk",
+ mout_sclk_peri_spi_clk_p,
+ MUX_SEL_TOP_PERI1, 4, 1),
+ MUX(TOP_MOUT_SCLK_PERI_SPI0_CLK, "mout_sclk_peri_spi0_clk",
+ mout_sclk_peri_spi_clk_p,
+ MUX_SEL_TOP_PERI1, 8, 1),
+ MUX(TOP_MOUT_SCLK_PERI_UART1_UCLK, "mout_sclk_peri_uart1_uclk",
+ mout_sclk_peri_uart_uclk_p,
+ MUX_SEL_TOP_PERI1, 12, 1),
+ MUX(TOP_MOUT_SCLK_PERI_UART2_UCLK, "mout_sclk_peri_uart2_uclk",
+ mout_sclk_peri_uart_uclk_p,
+ MUX_SEL_TOP_PERI1, 16, 1),
+ MUX(TOP_MOUT_SCLK_PERI_UART0_UCLK, "mout_sclk_peri_uart0_uclk",
+ mout_sclk_peri_uart_uclk_p,
+ MUX_SEL_TOP_PERI1, 20, 1),
+
+
+ MUX(TOP_MOUT_BUS1_BUSTOP_400, "mout_bus1_bustop_400",
+ mout_bus_bustop_400_p,
+ MUX_SEL_TOP_BUS, 0, 1),
+ MUX(TOP_MOUT_BUS1_BUSTOP_100, "mout_bus1_bustop_100",
+ mout_bus_bustop_100_p,
+ MUX_SEL_TOP_BUS, 4, 1),
+ MUX(TOP_MOUT_BUS2_BUSTOP_100, "mout_bus2_bustop_100",
+ mout_bus_bustop_100_p,
+ MUX_SEL_TOP_BUS, 8, 1),
+ MUX(TOP_MOUT_BUS2_BUSTOP_400, "mout_bus2_bustop_400",
+ mout_bus_bustop_400_p,
+ MUX_SEL_TOP_BUS, 12, 1),
+ MUX(TOP_MOUT_BUS3_BUSTOP_400, "mout_bus3_bustop_400",
+ mout_bus_bustop_400_p,
+ MUX_SEL_TOP_BUS, 16, 1),
+ MUX(TOP_MOUT_BUS3_BUSTOP_100, "mout_bus3_bustop_100",
+ mout_bus_bustop_100_p,
+ MUX_SEL_TOP_BUS, 20, 1),
+ MUX(TOP_MOUT_BUS4_BUSTOP_400, "mout_bus4_bustop_400",
+ mout_bus_bustop_400_p,
+ MUX_SEL_TOP_BUS, 24, 1),
+ MUX(TOP_MOUT_BUS4_BUSTOP_100, "mout_bus4_bustop_100",
+ mout_bus_bustop_100_p,
+ MUX_SEL_TOP_BUS, 28, 1),
+
+ MUX(TOP_MOUT_SCLK_FSYS_USB, "mout_sclk_fsys_usb",
+ mout_sclk_fsys_usb_p,
+ MUX_SEL_TOP_FSYS, 0, 1),
+ MUX(TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A, "mout_sclk_fsys_mmc2_sdclkin_a",
+ mout_sclk_fsys_mmc_sdclkin_a_p,
+ MUX_SEL_TOP_FSYS, 4, 1),
+ MUX(TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B, "mout_sclk_fsys_mmc2_sdclkin_b",
+ mout_sclk_fsys_mmc2_sdclkin_b_p,
+ MUX_SEL_TOP_FSYS, 8, 1),
+ MUX(TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A, "mout_sclk_fsys_mmc1_sdclkin_a",
+ mout_sclk_fsys_mmc_sdclkin_a_p,
+ MUX_SEL_TOP_FSYS, 12, 1),
+ MUX(TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B, "mout_sclk_fsys_mmc1_sdclkin_b",
+ mout_sclk_fsys_mmc1_sdclkin_b_p,
+ MUX_SEL_TOP_FSYS, 16, 1),
+ MUX(TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A, "mout_sclk_fsys_mmc0_sdclkin_a",
+ mout_sclk_fsys_mmc_sdclkin_a_p,
+ MUX_SEL_TOP_FSYS, 20, 1),
+ MUX(TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B, "mout_sclk_fsys_mmc0_sdclkin_b",
+ mout_sclk_fsys_mmc0_sdclkin_b_p,
+ MUX_SEL_TOP_FSYS, 24, 1),
+
+ MUX(TOP_MOUT_ISP1_MEDIA_400, "mout_isp1_media_400",
+ mout_isp1_media_400_p,
+ MUX_SEL_TOP_ISP10, 4, 1),
+ MUX(TOP_MOUT_ACLK_ISP1_400, "mout_aclk_isp1_400", mout_aclk_isp1_400_p,
+ MUX_SEL_TOP_ISP10, 8 , 1),
+ MUX(TOP_MOUT_ISP1_MEDIA_266, "mout_isp1_media_266",
+ mout_isp1_media_266_p,
+ MUX_SEL_TOP_ISP10, 16, 1),
+ MUX(TOP_MOUT_ACLK_ISP1_266, "mout_aclk_isp1_266", mout_aclk_isp1_266_p,
+ MUX_SEL_TOP_ISP10, 20, 1),
+
+ MUX(TOP_MOUT_SCLK_ISP1_SPI0, "mout_sclk_isp1_spi0", mout_sclk_isp_spi_p,
+ MUX_SEL_TOP_ISP11, 4, 1),
+ MUX(TOP_MOUT_SCLK_ISP1_SPI1, "mout_sclk_isp1_spi1", mout_sclk_isp_spi_p,
+ MUX_SEL_TOP_ISP11, 8, 1),
+ MUX(TOP_MOUT_SCLK_ISP1_UART, "mout_sclk_isp1_uart",
+ mout_sclk_isp_uart_p,
+ MUX_SEL_TOP_ISP11, 12, 1),
+ MUX(TOP_MOUT_SCLK_ISP1_SENSOR0, "mout_sclk_isp1_sensor0",
+ mout_sclk_isp_sensor_p,
+ MUX_SEL_TOP_ISP11, 16, 1),
+ MUX(TOP_MOUT_SCLK_ISP1_SENSOR1, "mout_sclk_isp1_sensor1",
+ mout_sclk_isp_sensor_p,
+ MUX_SEL_TOP_ISP11, 20, 1),
+ MUX(TOP_MOUT_SCLK_ISP1_SENSOR2, "mout_sclk_isp1_sensor2",
+ mout_sclk_isp_sensor_p,
+ MUX_SEL_TOP_ISP11, 24, 1),
+
+ MUX(TOP_MOUT_MFC_BUSTOP_333, "mout_mfc_bustop_333",
+ mout_mfc_bustop_333_p,
+ MUX_SEL_TOP_MFC, 4, 1),
+ MUX(TOP_MOUT_ACLK_MFC_333, "mout_aclk_mfc_333", mout_aclk_mfc_333_p,
+ MUX_SEL_TOP_MFC, 8, 1),
+
+ MUX(TOP_MOUT_G2D_BUSTOP_333, "mout_g2d_bustop_333",
+ mout_g2d_bustop_333_p,
+ MUX_SEL_TOP_G2D, 4, 1),
+ MUX(TOP_MOUT_ACLK_G2D_333, "mout_aclk_g2d_333", mout_aclk_g2d_333_p,
+ MUX_SEL_TOP_G2D, 8, 1),
+
+ MUX(TOP_MOUT_M2M_MEDIATOP_400, "mout_m2m_mediatop_400",
+ mout_m2m_mediatop_400_p,
+ MUX_SEL_TOP_GSCL, 0, 1),
+ MUX(TOP_MOUT_ACLK_GSCL_400, "mout_aclk_gscl_400",
+ mout_aclk_gscl_400_p,
+ MUX_SEL_TOP_GSCL, 4, 1),
+ MUX(TOP_MOUT_GSCL_BUSTOP_333, "mout_gscl_bustop_333",
+ mout_gscl_bustop_333_p,
+ MUX_SEL_TOP_GSCL, 8, 1),
+ MUX(TOP_MOUT_ACLK_GSCL_333, "mout_aclk_gscl_333",
+ mout_aclk_gscl_333_p,
+ MUX_SEL_TOP_GSCL, 12, 1),
+ MUX(TOP_MOUT_GSCL_BUSTOP_FIMC, "mout_gscl_bustop_fimc",
+ mout_gscl_bustop_fimc_p,
+ MUX_SEL_TOP_GSCL, 16, 1),
+ MUX(TOP_MOUT_ACLK_GSCL_FIMC, "mout_aclk_gscl_fimc",
+ mout_aclk_gscl_fimc_p,
+ MUX_SEL_TOP_GSCL, 20, 1),
+};
+
+struct samsung_div_clock top_div_clks[] __initdata = {
+ DIV(TOP_DOUT_ACLK_G2D_333, "dout_aclk_g2d_333", "mout_aclk_g2d_333",
+ DIV_TOP_G2D_MFC, 0, 3),
+ DIV(TOP_DOUT_ACLK_MFC_333, "dout_aclk_mfc_333", "mout_aclk_mfc_333",
+ DIV_TOP_G2D_MFC, 4, 3),
+
+ DIV(TOP_DOUT_ACLK_GSCL_333, "dout_aclk_gscl_333", "mout_aclk_gscl_333",
+ DIV_TOP_GSCL_ISP0, 0, 3),
+ DIV(TOP_DOUT_ACLK_GSCL_400, "dout_aclk_gscl_400", "mout_aclk_gscl_400",
+ DIV_TOP_GSCL_ISP0, 4, 3),
+ DIV(TOP_DOUT_ACLK_GSCL_FIMC, "dout_aclk_gscl_fimc",
+ "mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 8, 3),
+ DIV(TOP_DOUT_SCLK_ISP1_SENSOR0_A, "dout_sclk_isp1_sensor0_a",
+ "mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 16, 4),
+ DIV(TOP_DOUT_SCLK_ISP1_SENSOR1_A, "dout_sclk_isp1_sensor1_a",
+ "mout_aclk_gscl_400", DIV_TOP_GSCL_ISP0, 20, 4),
+ DIV(TOP_DOUT_SCLK_ISP1_SENSOR2_A, "dout_sclk_isp1_sensor2_a",
+ "mout_aclk_gscl_fimc", DIV_TOP_GSCL_ISP0, 24, 4),
+
+ DIV(TOP_DOUT_ACLK_ISP1_266, "dout_aclk_isp1_266", "mout_aclk_isp1_266",
+ DIV_TOP_ISP10, 0, 3),
+ DIV(TOP_DOUT_ACLK_ISP1_400, "dout_aclk_isp1_400", "mout_aclk_isp1_400",
+ DIV_TOP_ISP10, 4, 3),
+ DIV(TOP_DOUT_SCLK_ISP1_SPI0_A, "dout_sclk_isp1_spi0_a",
+ "mout_sclk_isp1_spi0", DIV_TOP_ISP10, 12, 4),
+ DIV(TOP_DOUT_SCLK_ISP1_SPI0_B, "dout_sclk_isp1_spi0_b",
+ "dout_sclk_isp1_spi0_a", DIV_TOP_ISP10, 16, 8),
+
+ DIV(TOP_DOUT_SCLK_ISP1_SPI1_A, "dout_sclk_isp1_spi1_a",
+ "mout_sclk_isp1_spi1", DIV_TOP_ISP11, 0, 4),
+ DIV(TOP_DOUT_SCLK_ISP1_SPI1_B, "dout_sclk_isp1_spi1_b",
+ "dout_sclk_isp1_spi1_a", DIV_TOP_ISP11, 4, 8),
+ DIV(TOP_DOUT_SCLK_ISP1_UART, "dout_sclk_isp1_uart",
+ "mout_sclk_isp1_uart", DIV_TOP_ISP11, 12, 4),
+ DIV(TOP_DOUT_SCLK_ISP1_SENSOR0_B, "dout_sclk_isp1_sensor0_b",
+ "dout_sclk_isp1_sensor0_a", DIV_TOP_ISP11, 16, 4),
+ DIV(TOP_DOUT_SCLK_ISP1_SENSOR1_B, "dout_sclk_isp1_sensor1_b",
+ "dout_sclk_isp1_sensor1_a", DIV_TOP_ISP11, 20, 4),
+ DIV(TOP_DOUT_SCLK_ISP1_SENSOR2_B, "dout_sclk_isp1_sensor2_b",
+ "dout_sclk_isp1_sensor2_a", DIV_TOP_ISP11, 24, 4),
+
+ DIV(TOP_DOUTTOP__SCLK_HPM_TARGETCLK, "dout_sclk_hpm_targetclk",
+ "mout_bustop_pll_user", DIV_TOP_HPM, 0, 3),
+
+ DIV(TOP_DOUT_ACLK_DISP_333, "dout_aclk_disp_333", "mout_aclk_disp_333",
+ DIV_TOP_DISP, 0, 3),
+ DIV(TOP_DOUT_ACLK_DISP_222, "dout_aclk_disp_222", "mout_aclk_disp_222",
+ DIV_TOP_DISP, 4, 3),
+ DIV(TOP_DOUT_SCLK_DISP_PIXEL, "dout_sclk_disp_pixel",
+ "mout_sclk_disp_pixel", DIV_TOP_DISP, 8, 3),
+
+ DIV(TOP_DOUT_ACLK_BUS1_400, "dout_aclk_bus1_400",
+ "mout_bus1_bustop_400", DIV_TOP_BUS, 0, 3),
+ DIV(TOP_DOUT_ACLK_BUS1_100, "dout_aclk_bus1_100",
+ "mout_bus1_bustop_100", DIV_TOP_BUS, 4, 4),
+ DIV(TOP_DOUT_ACLK_BUS2_400, "dout_aclk_bus2_400",
+ "mout_bus2_bustop_400", DIV_TOP_BUS, 8, 3),
+ DIV(TOP_DOUT_ACLK_BUS2_100, "dout_aclk_bus2_100",
+ "mout_bus2_bustop_100", DIV_TOP_BUS, 12, 4),
+ DIV(TOP_DOUT_ACLK_BUS3_400, "dout_aclk_bus3_400",
+ "mout_bus3_bustop_400", DIV_TOP_BUS, 16, 3),
+ DIV(TOP_DOUT_ACLK_BUS3_100, "dout_aclk_bus3_100",
+ "mout_bus3_bustop_100", DIV_TOP_BUS, 20, 4),
+ DIV(TOP_DOUT_ACLK_BUS4_400, "dout_aclk_bus4_400",
+ "mout_bus4_bustop_400", DIV_TOP_BUS, 24, 3),
+ DIV(TOP_DOUT_ACLK_BUS4_100, "dout_aclk_bus4_100",
+ "mout_bus4_bustop_100", DIV_TOP_BUS, 28, 4),
+
+ DIV(TOP_DOUT_SCLK_PERI_SPI0_A, "dout_sclk_peri_spi0_a",
+ "mout_sclk_peri_spi0_clk", DIV_TOP_PERI0, 4, 4),
+ DIV(TOP_DOUT_SCLK_PERI_SPI0_B, "dout_sclk_peri_spi0_b",
+ "dout_sclk_peri_spi0_a", DIV_TOP_PERI0, 8, 8),
+ DIV(TOP_DOUT_SCLK_PERI_SPI1_A, "dout_sclk_peri_spi1_a",
+ "mout_sclk_peri_spi1_clk", DIV_TOP_PERI0, 16, 4),
+ DIV(TOP_DOUT_SCLK_PERI_SPI1_B, "dout_sclk_peri_spi1_b",
+ "dout_sclk_peri_spi1_a", DIV_TOP_PERI0, 20, 8),
+
+ DIV(TOP_DOUT_SCLK_PERI_SPI2_A, "dout_sclk_peri_spi2_a",
+ "mout_sclk_peri_spi2_clk", DIV_TOP_PERI1, 0, 4),
+ DIV(TOP_DOUT_SCLK_PERI_SPI2_B, "dout_sclk_peri_spi2_b",
+ "dout_sclk_peri_spi2_a", DIV_TOP_PERI1, 4, 8),
+ DIV(TOP_DOUT_SCLK_PERI_UART1, "dout_sclk_peri_uart1",
+ "mout_sclk_peri_uart1_uclk", DIV_TOP_PERI1, 16, 4),
+ DIV(TOP_DOUT_SCLK_PERI_UART2, "dout_sclk_peri_uart2",
+ "mout_sclk_peri_uart2_uclk", DIV_TOP_PERI1, 20, 4),
+ DIV(TOP_DOUT_SCLK_PERI_UART0, "dout_sclk_peri_uart0",
+ "mout_sclk_peri_uart0_uclk", DIV_TOP_PERI1, 24, 4),
+
+ DIV(TOP_DOUT_ACLK_PERI_66, "dout_aclk_peri_66", "mout_bustop_pll_user",
+ DIV_TOP_PERI2, 20, 4),
+ DIV(TOP_DOUT_ACLK_PERI_AUD, "dout_aclk_peri_aud",
+ "mout_audtop_pll_user", DIV_TOP_PERI2, 24, 3),
+
+ DIV(TOP_DOUT_ACLK_FSYS_200, "dout_aclk_fsys_200",
+ "mout_bustop_pll_user", DIV_TOP_FSYS0, 0, 3),
+ DIV(TOP_DOUT_SCLK_FSYS_USBDRD30_SUSPEND_CLK,
+ "dout_sclk_fsys_usbdrd30_suspend_clk",
+ "mout_sclk_fsys_usb", DIV_TOP_FSYS0, 4, 4),
+ DIV(TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_A, "dout_sclk_fsys_mmc0_sdclkin_a",
+ "mout_sclk_fsys_mmc0_sdclkin_b",
+ DIV_TOP_FSYS0, 12, 4),
+ DIV(TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_B, "dout_sclk_fsys_mmc0_sdclkin_b",
+ "dout_sclk_fsys_mmc0_sdclkin_a",
+ DIV_TOP_FSYS0, 16, 8),
+
+
+ DIV(TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_A, "dout_sclk_fsys_mmc1_sdclkin_a",
+ "mout_sclk_fsys_mmc1_sdclkin_b",
+ DIV_TOP_FSYS1, 0, 4),
+ DIV(TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_B, "dout_sclk_fsys_mmc1_sdclkin_b",
+ "dout_sclk_fsys_mmc1_sdclkin_a",
+ DIV_TOP_FSYS1, 4, 8),
+ DIV(TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_A, "dout_sclk_fsys_mmc2_sdclkin_a",
+ "mout_sclk_fsys_mmc2_sdclkin_b",
+ DIV_TOP_FSYS1, 12, 4),
+ DIV(TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_B, "dout_sclk_fsys_mmc2_sdclkin_b",
+ "dout_sclk_fsys_mmc2_sdclkin_a",
+ DIV_TOP_FSYS1, 16, 8),
+
+};
+
+struct samsung_gate_clock top_gate_clks[] __initdata = {
+ GATE(TOP_SCLK_MMC0, "sclk_fsys_mmc0_sdclkin",
+ "dout_sclk_fsys_mmc0_sdclkin_b",
+ EN_SCLK_TOP, 7, CLK_SET_RATE_PARENT, 0),
+ GATE(TOP_SCLK_MMC1, "sclk_fsys_mmc1_sdclkin",
+ "dout_sclk_fsys_mmc1_sdclkin_b",
+ EN_SCLK_TOP, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(TOP_SCLK_MMC2, "sclk_fsys_mmc2_sdclkin",
+ "dout_sclk_fsys_mmc2_sdclkin_b",
+ EN_SCLK_TOP, 9, CLK_SET_RATE_PARENT, 0),
+ GATE(TOP_SCLK_FIMD1, "sclk_disp_pixel", "dout_sclk_disp_pixel",
+ EN_ACLK_TOP, 10, CLK_IGNORE_UNUSED |
+ CLK_SET_RATE_PARENT, 0),
+};
+
+static struct samsung_pll_clock top_pll_clks[] __initdata = {
+ PLL(pll_2550xx, TOP_FOUT_DISP_PLL, "fout_disp_pll", "fin_pll",
+ DISP_PLL_LOCK, DISP_PLL_CON0,
+ pll2550_24mhz_tbl),
+ PLL(pll_2650xx, TOP_FOUT_AUD_PLL, "fout_aud_pll", "fin_pll",
+ AUD_PLL_LOCK, AUD_PLL_CON0,
+ pll2650_24mhz_tbl),
+};
+
+static void __init exynos5260_clk_top_init(struct device_node *np)
+{
+ struct exynos5260_cmu_info cmu = {0};
+
+ cmu.pll_clks = top_pll_clks;
+ cmu.nr_pll_clks = ARRAY_SIZE(top_pll_clks);
+ cmu.mux_clks = top_mux_clks;
+ cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks);
+ cmu.div_clks = top_div_clks;
+ cmu.nr_div_clks = ARRAY_SIZE(top_div_clks);
+ cmu.gate_clks = top_gate_clks;
+ cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks);
+ cmu.fixed_clks = fixed_rate_clks;
+ cmu.nr_fixed_clks = ARRAY_SIZE(fixed_rate_clks);
+ cmu.nr_clk_ids = TOP_NR_CLK;
+ cmu.clk_regs = top_clk_regs;
+ cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs);
+
+ exynos5260_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top",
+ exynos5260_clk_top_init);
--- /dev/null
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Rahul Sharma <rahul.sharma@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5260 SoC.
+ */
+
+#ifndef __CLK_EXYNOS5260_H
+#define __CLK_EXYNOS5260_H
+
+/*
+*Registers for CMU_AUD
+*/
+#define MUX_SEL_AUD 0x0200
+#define MUX_ENABLE_AUD 0x0300
+#define MUX_STAT_AUD 0x0400
+#define MUX_IGNORE_AUD 0x0500
+#define DIV_AUD0 0x0600
+#define DIV_AUD1 0x0604
+#define DIV_STAT_AUD0 0x0700
+#define DIV_STAT_AUD1 0x0704
+#define EN_ACLK_AUD 0x0800
+#define EN_PCLK_AUD 0x0900
+#define EN_SCLK_AUD 0x0a00
+#define EN_IP_AUD 0x0b00
+
+/*
+*Registers for CMU_DISP
+*/
+#define MUX_SEL_DISP0 0x0200
+#define MUX_SEL_DISP1 0x0204
+#define MUX_SEL_DISP2 0x0208
+#define MUX_SEL_DISP3 0x020C
+#define MUX_SEL_DISP4 0x0210
+#define MUX_ENABLE_DISP0 0x0300
+#define MUX_ENABLE_DISP1 0x0304
+#define MUX_ENABLE_DISP2 0x0308
+#define MUX_ENABLE_DISP3 0x030c
+#define MUX_ENABLE_DISP4 0x0310
+#define MUX_STAT_DISP0 0x0400
+#define MUX_STAT_DISP1 0x0404
+#define MUX_STAT_DISP2 0x0408
+#define MUX_STAT_DISP3 0x040c
+#define MUX_STAT_DISP4 0x0410
+#define MUX_IGNORE_DISP0 0x0500
+#define MUX_IGNORE_DISP1 0x0504
+#define MUX_IGNORE_DISP2 0x0508
+#define MUX_IGNORE_DISP3 0x050c
+#define MUX_IGNORE_DISP4 0x0510
+#define DIV_DISP 0x0600
+#define DIV_STAT_DISP 0x0700
+#define EN_ACLK_DISP 0x0800
+#define EN_PCLK_DISP 0x0900
+#define EN_SCLK_DISP0 0x0a00
+#define EN_SCLK_DISP1 0x0a04
+#define EN_IP_DISP 0x0b00
+#define EN_IP_DISP_BUS 0x0b04
+
+
+/*
+*Registers for CMU_EGL
+*/
+#define EGL_PLL_LOCK 0x0000
+#define EGL_DPLL_LOCK 0x0004
+#define EGL_PLL_CON0 0x0100
+#define EGL_PLL_CON1 0x0104
+#define EGL_PLL_FREQ_DET 0x010c
+#define EGL_DPLL_CON0 0x0110
+#define EGL_DPLL_CON1 0x0114
+#define EGL_DPLL_FREQ_DET 0x011c
+#define MUX_SEL_EGL 0x0200
+#define MUX_ENABLE_EGL 0x0300
+#define MUX_STAT_EGL 0x0400
+#define DIV_EGL 0x0600
+#define DIV_EGL_PLL_FDET 0x0604
+#define DIV_STAT_EGL 0x0700
+#define DIV_STAT_EGL_PLL_FDET 0x0704
+#define EN_ACLK_EGL 0x0800
+#define EN_PCLK_EGL 0x0900
+#define EN_SCLK_EGL 0x0a00
+#define EN_IP_EGL 0x0b00
+#define CLKOUT_CMU_EGL 0x0c00
+#define CLKOUT_CMU_EGL_DIV_STAT 0x0c04
+#define ARMCLK_STOPCTRL 0x1000
+#define EAGLE_EMA_CTRL 0x1008
+#define EAGLE_EMA_STATUS 0x100c
+#define PWR_CTRL 0x1020
+#define PWR_CTRL2 0x1024
+#define CLKSTOP_CTRL 0x1028
+#define INTR_SPREAD_EN 0x1080
+#define INTR_SPREAD_USE_STANDBYWFI 0x1084
+#define INTR_SPREAD_BLOCKING_DURATION 0x1088
+#define CMU_EGL_SPARE0 0x2000
+#define CMU_EGL_SPARE1 0x2004
+#define CMU_EGL_SPARE2 0x2008
+#define CMU_EGL_SPARE3 0x200c
+#define CMU_EGL_SPARE4 0x2010
+
+/*
+*Registers for CMU_FSYS
+*/
+
+#define MUX_SEL_FSYS0 0x0200
+#define MUX_SEL_FSYS1 0x0204
+#define MUX_ENABLE_FSYS0 0x0300
+#define MUX_ENABLE_FSYS1 0x0304
+#define MUX_STAT_FSYS0 0x0400
+#define MUX_STAT_FSYS1 0x0404
+#define MUX_IGNORE_FSYS0 0x0500
+#define MUX_IGNORE_FSYS1 0x0504
+#define EN_ACLK_FSYS 0x0800
+#define EN_ACLK_FSYS_SECURE_RTIC 0x0804
+#define EN_ACLK_FSYS_SECURE_SMMU_RTIC 0x0808
+#define EN_PCLK_FSYS 0x0900
+#define EN_SCLK_FSYS 0x0a00
+#define EN_IP_FSYS 0x0b00
+#define EN_IP_FSYS_SECURE_RTIC 0x0b04
+#define EN_IP_FSYS_SECURE_SMMU_RTIC 0x0b08
+
+/*
+*Registers for CMU_G2D
+*/
+
+#define MUX_SEL_G2D 0x0200
+#define MUX_ENABLE_G2D 0x0300
+#define MUX_STAT_G2D 0x0400
+#define DIV_G2D 0x0600
+#define DIV_STAT_G2D 0x0700
+#define EN_ACLK_G2D 0x0800
+#define EN_ACLK_G2D_SECURE_SSS 0x0804
+#define EN_ACLK_G2D_SECURE_SLIM_SSS 0x0808
+#define EN_ACLK_G2D_SECURE_SMMU_SLIM_SSS 0x080c
+#define EN_ACLK_G2D_SECURE_SMMU_SSS 0x0810
+#define EN_ACLK_G2D_SECURE_SMMU_MDMA 0x0814
+#define EN_ACLK_G2D_SECURE_SMMU_G2D 0x0818
+#define EN_PCLK_G2D 0x0900
+#define EN_PCLK_G2D_SECURE_SMMU_SLIM_SSS 0x0904
+#define EN_PCLK_G2D_SECURE_SMMU_SSS 0x0908
+#define EN_PCLK_G2D_SECURE_SMMU_MDMA 0x090c
+#define EN_PCLK_G2D_SECURE_SMMU_G2D 0x0910
+#define EN_IP_G2D 0x0b00
+#define EN_IP_G2D_SECURE_SSS 0x0b04
+#define EN_IP_G2D_SECURE_SLIM_SSS 0x0b08
+#define EN_IP_G2D_SECURE_SMMU_SLIM_SSS 0x0b0c
+#define EN_IP_G2D_SECURE_SMMU_SSS 0x0b10
+#define EN_IP_G2D_SECURE_SMMU_MDMA 0x0b14
+#define EN_IP_G2D_SECURE_SMMU_G2D 0x0b18
+
+/*
+*Registers for CMU_G3D
+*/
+
+#define G3D_PLL_LOCK 0x0000
+#define G3D_PLL_CON0 0x0100
+#define G3D_PLL_CON1 0x0104
+#define G3D_PLL_FDET 0x010c
+#define MUX_SEL_G3D 0x0200
+#define MUX_EN_G3D 0x0300
+#define MUX_STAT_G3D 0x0400
+#define MUX_IGNORE_G3D 0x0500
+#define DIV_G3D 0x0600
+#define DIV_G3D_PLL_FDET 0x0604
+#define DIV_STAT_G3D 0x0700
+#define DIV_STAT_G3D_PLL_FDET 0x0704
+#define EN_ACLK_G3D 0x0800
+#define EN_PCLK_G3D 0x0900
+#define EN_SCLK_G3D 0x0a00
+#define EN_IP_G3D 0x0b00
+#define CLKOUT_CMU_G3D 0x0c00
+#define CLKOUT_CMU_G3D_DIV_STAT 0x0c04
+#define G3DCLK_STOPCTRL 0x1000
+#define G3D_EMA_CTRL 0x1008
+#define G3D_EMA_STATUS 0x100c
+
+/*
+*Registers for CMU_GSCL
+*/
+
+#define MUX_SEL_GSCL 0x0200
+#define MUX_EN_GSCL 0x0300
+#define MUX_STAT_GSCL 0x0400
+#define MUX_IGNORE_GSCL 0x0500
+#define DIV_GSCL 0x0600
+#define DIV_STAT_GSCL 0x0700
+#define EN_ACLK_GSCL 0x0800
+#define EN_ACLK_GSCL_FIMC 0x0804
+#define EN_ACLK_GSCL_SECURE_SMMU_GSCL0 0x0808
+#define EN_ACLK_GSCL_SECURE_SMMU_GSCL1 0x080c
+#define EN_ACLK_GSCL_SECURE_SMMU_MSCL0 0x0810
+#define EN_ACLK_GSCL_SECURE_SMMU_MSCL1 0x0814
+#define EN_PCLK_GSCL 0x0900
+#define EN_PCLK_GSCL_FIMC 0x0904
+#define EN_PCLK_GSCL_SECURE_SMMU_GSCL0 0x0908
+#define EN_PCLK_GSCL_SECURE_SMMU_GSCL1 0x090c
+#define EN_PCLK_GSCL_SECURE_SMMU_MSCL0 0x0910
+#define EN_PCLK_GSCL_SECURE_SMMU_MSCL1 0x0914
+#define EN_SCLK_GSCL 0x0a00
+#define EN_SCLK_GSCL_FIMC 0x0a04
+#define EN_IP_GSCL 0x0b00
+#define EN_IP_GSCL_FIMC 0x0b04
+#define EN_IP_GSCL_SECURE_SMMU_GSCL0 0x0b08
+#define EN_IP_GSCL_SECURE_SMMU_GSCL1 0x0b0c
+#define EN_IP_GSCL_SECURE_SMMU_MSCL0 0x0b10
+#define EN_IP_GSCL_SECURE_SMMU_MSCL1 0x0b14
+
+/*
+*Registers for CMU_ISP
+*/
+#define MUX_SEL_ISP0 0x0200
+#define MUX_SEL_ISP1 0x0204
+#define MUX_ENABLE_ISP0 0x0300
+#define MUX_ENABLE_ISP1 0x0304
+#define MUX_STAT_ISP0 0x0400
+#define MUX_STAT_ISP1 0x0404
+#define MUX_IGNORE_ISP0 0x0500
+#define MUX_IGNORE_ISP1 0x0504
+#define DIV_ISP 0x0600
+#define DIV_STAT_ISP 0x0700
+#define EN_ACLK_ISP0 0x0800
+#define EN_ACLK_ISP1 0x0804
+#define EN_PCLK_ISP0 0x0900
+#define EN_PCLK_ISP1 0x0904
+#define EN_SCLK_ISP 0x0a00
+#define EN_IP_ISP0 0x0b00
+#define EN_IP_ISP1 0x0b04
+
+/*
+*Registers for CMU_KFC
+*/
+#define KFC_PLL_LOCK 0x0000
+#define KFC_PLL_CON0 0x0100
+#define KFC_PLL_CON1 0x0104
+#define KFC_PLL_FDET 0x010c
+#define MUX_SEL_KFC0 0x0200
+#define MUX_SEL_KFC2 0x0208
+#define MUX_ENABLE_KFC0 0x0300
+#define MUX_ENABLE_KFC2 0x0308
+#define MUX_STAT_KFC0 0x0400
+#define MUX_STAT_KFC2 0x0408
+#define DIV_KFC 0x0600
+#define DIV_KFC_PLL_FDET 0x0604
+#define DIV_STAT_KFC 0x0700
+#define DIV_STAT_KFC_PLL_FDET 0x0704
+#define EN_ACLK_KFC 0x0800
+#define EN_PCLK_KFC 0x0900
+#define EN_SCLK_KFC 0x0a00
+#define EN_IP_KFC 0x0b00
+#define CLKOUT_CMU_KFC 0x0c00
+#define CLKOUT_CMU_KFC_DIV_STAT 0x0c04
+#define ARMCLK_STOPCTRL_KFC 0x1000
+#define ARM_EMA_CTRL 0x1008
+#define ARM_EMA_STATUS 0x100c
+#define PWR_CTRL_KFC 0x1020
+#define PWR_CTRL2_KFC 0x1024
+#define CLKSTOP_CTRL_KFC 0x1028
+#define INTR_SPREAD_ENABLE_KFC 0x1080
+#define INTR_SPREAD_USE_STANDBYWFI_KFC 0x1084
+#define INTR_SPREAD_BLOCKING_DURATION_KFC 0x1088
+#define CMU_KFC_SPARE0 0x2000
+#define CMU_KFC_SPARE1 0x2004
+#define CMU_KFC_SPARE2 0x2008
+#define CMU_KFC_SPARE3 0x200c
+#define CMU_KFC_SPARE4 0x2010
+
+/*
+*Registers for CMU_MFC
+*/
+#define MUX_SEL_MFC 0x0200
+#define MUX_ENABLE_MFC 0x0300
+#define MUX_STAT_MFC 0x0400
+#define DIV_MFC 0x0600
+#define DIV_STAT_MFC 0x0700
+#define EN_ACLK_MFC 0x0800
+#define EN_ACLK_SECURE_SMMU2_MFC 0x0804
+#define EN_PCLK_MFC 0x0900
+#define EN_PCLK_SECURE_SMMU2_MFC 0x0904
+#define EN_IP_MFC 0x0b00
+#define EN_IP_MFC_SECURE_SMMU2_MFC 0x0b04
+
+/*
+*Registers for CMU_MIF
+*/
+#define MEM_PLL_LOCK 0x0000
+#define BUS_PLL_LOCK 0x0004
+#define MEDIA_PLL_LOCK 0x0008
+#define MEM_PLL_CON0 0x0100
+#define MEM_PLL_CON1 0x0104
+#define MEM_PLL_FDET 0x010c
+#define BUS_PLL_CON0 0x0110
+#define BUS_PLL_CON1 0x0114
+#define BUS_PLL_FDET 0x011c
+#define MEDIA_PLL_CON0 0x0120
+#define MEDIA_PLL_CON1 0x0124
+#define MEDIA_PLL_FDET 0x012c
+#define MUX_SEL_MIF 0x0200
+#define MUX_ENABLE_MIF 0x0300
+#define MUX_STAT_MIF 0x0400
+#define MUX_IGNORE_MIF 0x0500
+#define DIV_MIF 0x0600
+#define DIV_MIF_PLL_FDET 0x0604
+#define DIV_STAT_MIF 0x0700
+#define DIV_STAT_MIF_PLL_FDET 0x0704
+#define EN_ACLK_MIF 0x0800
+#define EN_ACLK_MIF_SECURE_DREX1_TZ 0x0804
+#define EN_ACLK_MIF_SECURE_DREX0_TZ 0x0808
+#define EN_ACLK_MIF_SECURE_INTMEM 0x080c
+#define EN_PCLK_MIF 0x0900
+#define EN_PCLK_MIF_SECURE_MONOCNT 0x0904
+#define EN_PCLK_MIF_SECURE_RTC_APBIF 0x0908
+#define EN_PCLK_MIF_SECURE_DREX1_TZ 0x090c
+#define EN_PCLK_MIF_SECURE_DREX0_TZ 0x0910
+#define EN_SCLK_MIF 0x0a00
+#define EN_IP_MIF 0x0b00
+#define EN_IP_MIF_SECURE_MONOCNT 0x0b04
+#define EN_IP_MIF_SECURE_RTC_APBIF 0x0b08
+#define EN_IP_MIF_SECURE_DREX1_TZ 0x0b0c
+#define EN_IP_MIF_SECURE_DREX0_TZ 0x0b10
+#define EN_IP_MIF_SECURE_INTEMEM 0x0b14
+#define CLKOUT_CMU_MIF_DIV_STAT 0x0c04
+#define DREX_FREQ_CTRL 0x1000
+#define PAUSE 0x1004
+#define DDRPHY_LOCK_CTRL 0x1008
+#define CLKOUT_CMU_MIF 0xcb00
+
+/*
+*Registers for CMU_PERI
+*/
+#define MUX_SEL_PERI 0x0200
+#define MUX_SEL_PERI1 0x0204
+#define MUX_ENABLE_PERI 0x0300
+#define MUX_ENABLE_PERI1 0x0304
+#define MUX_STAT_PERI 0x0400
+#define MUX_STAT_PERI1 0x0404
+#define MUX_IGNORE_PERI 0x0500
+#define MUX_IGNORE_PERI1 0x0504
+#define DIV_PERI 0x0600
+#define DIV_STAT_PERI 0x0700
+#define EN_PCLK_PERI0 0x0800
+#define EN_PCLK_PERI1 0x0804
+#define EN_PCLK_PERI2 0x0808
+#define EN_PCLK_PERI3 0x080c
+#define EN_PCLK_PERI_SECURE_CHIPID 0x0810
+#define EN_PCLK_PERI_SECURE_PROVKEY0 0x0814
+#define EN_PCLK_PERI_SECURE_PROVKEY1 0x0818
+#define EN_PCLK_PERI_SECURE_SECKEY 0x081c
+#define EN_PCLK_PERI_SECURE_ANTIRBKCNT 0x0820
+#define EN_PCLK_PERI_SECURE_TOP_RTC 0x0824
+#define EN_PCLK_PERI_SECURE_TZPC 0x0828
+#define EN_SCLK_PERI 0x0a00
+#define EN_SCLK_PERI_SECURE_TOP_RTC 0x0a04
+#define EN_IP_PERI0 0x0b00
+#define EN_IP_PERI1 0x0b04
+#define EN_IP_PERI2 0x0b08
+#define EN_IP_PERI_SECURE_CHIPID 0x0b0c
+#define EN_IP_PERI_SECURE_PROVKEY0 0x0b10
+#define EN_IP_PERI_SECURE_PROVKEY1 0x0b14
+#define EN_IP_PERI_SECURE_SECKEY 0x0b18
+#define EN_IP_PERI_SECURE_ANTIRBKCNT 0x0b1c
+#define EN_IP_PERI_SECURE_TOP_RTC 0x0b20
+#define EN_IP_PERI_SECURE_TZPC 0x0b24
+
+/*
+*Registers for CMU_TOP
+*/
+#define DISP_PLL_LOCK 0x0000
+#define AUD_PLL_LOCK 0x0004
+#define DISP_PLL_CON0 0x0100
+#define DISP_PLL_CON1 0x0104
+#define DISP_PLL_FDET 0x0108
+#define AUD_PLL_CON0 0x0110
+#define AUD_PLL_CON1 0x0114
+#define AUD_PLL_CON2 0x0118
+#define AUD_PLL_FDET 0x011c
+#define MUX_SEL_TOP_PLL0 0x0200
+#define MUX_SEL_TOP_MFC 0x0204
+#define MUX_SEL_TOP_G2D 0x0208
+#define MUX_SEL_TOP_GSCL 0x020c
+#define MUX_SEL_TOP_ISP10 0x0214
+#define MUX_SEL_TOP_ISP11 0x0218
+#define MUX_SEL_TOP_DISP0 0x021c
+#define MUX_SEL_TOP_DISP1 0x0220
+#define MUX_SEL_TOP_BUS 0x0224
+#define MUX_SEL_TOP_PERI0 0x0228
+#define MUX_SEL_TOP_PERI1 0x022c
+#define MUX_SEL_TOP_FSYS 0x0230
+#define MUX_ENABLE_TOP_PLL0 0x0300
+#define MUX_ENABLE_TOP_MFC 0x0304
+#define MUX_ENABLE_TOP_G2D 0x0308
+#define MUX_ENABLE_TOP_GSCL 0x030c
+#define MUX_ENABLE_TOP_ISP10 0x0314
+#define MUX_ENABLE_TOP_ISP11 0x0318
+#define MUX_ENABLE_TOP_DISP0 0x031c
+#define MUX_ENABLE_TOP_DISP1 0x0320
+#define MUX_ENABLE_TOP_BUS 0x0324
+#define MUX_ENABLE_TOP_PERI0 0x0328
+#define MUX_ENABLE_TOP_PERI1 0x032c
+#define MUX_ENABLE_TOP_FSYS 0x0330
+#define MUX_STAT_TOP_PLL0 0x0400
+#define MUX_STAT_TOP_MFC 0x0404
+#define MUX_STAT_TOP_G2D 0x0408
+#define MUX_STAT_TOP_GSCL 0x040c
+#define MUX_STAT_TOP_ISP10 0x0414
+#define MUX_STAT_TOP_ISP11 0x0418
+#define MUX_STAT_TOP_DISP0 0x041c
+#define MUX_STAT_TOP_DISP1 0x0420
+#define MUX_STAT_TOP_BUS 0x0424
+#define MUX_STAT_TOP_PERI0 0x0428
+#define MUX_STAT_TOP_PERI1 0x042c
+#define MUX_STAT_TOP_FSYS 0x0430
+#define MUX_IGNORE_TOP_PLL0 0x0500
+#define MUX_IGNORE_TOP_MFC 0x0504
+#define MUX_IGNORE_TOP_G2D 0x0508
+#define MUX_IGNORE_TOP_GSCL 0x050c
+#define MUX_IGNORE_TOP_ISP10 0x0514
+#define MUX_IGNORE_TOP_ISP11 0x0518
+#define MUX_IGNORE_TOP_DISP0 0x051c
+#define MUX_IGNORE_TOP_DISP1 0x0520
+#define MUX_IGNORE_TOP_BUS 0x0524
+#define MUX_IGNORE_TOP_PERI0 0x0528
+#define MUX_IGNORE_TOP_PERI1 0x052c
+#define MUX_IGNORE_TOP_FSYS 0x0530
+#define DIV_TOP_G2D_MFC 0x0600
+#define DIV_TOP_GSCL_ISP0 0x0604
+#define DIV_TOP_ISP10 0x0608
+#define DIV_TOP_ISP11 0x060c
+#define DIV_TOP_DISP 0x0610
+#define DIV_TOP_BUS 0x0614
+#define DIV_TOP_PERI0 0x0618
+#define DIV_TOP_PERI1 0x061c
+#define DIV_TOP_PERI2 0x0620
+#define DIV_TOP_FSYS0 0x0624
+#define DIV_TOP_FSYS1 0x0628
+#define DIV_TOP_HPM 0x062c
+#define DIV_TOP_PLL_FDET 0x0630
+#define DIV_STAT_TOP_G2D_MFC 0x0700
+#define DIV_STAT_TOP_GSCL_ISP0 0x0704
+#define DIV_STAT_TOP_ISP10 0x0708
+#define DIV_STAT_TOP_ISP11 0x070c
+#define DIV_STAT_TOP_DISP 0x0710
+#define DIV_STAT_TOP_BUS 0x0714
+#define DIV_STAT_TOP_PERI0 0x0718
+#define DIV_STAT_TOP_PERI1 0x071c
+#define DIV_STAT_TOP_PERI2 0x0720
+#define DIV_STAT_TOP_FSYS0 0x0724
+#define DIV_STAT_TOP_FSYS1 0x0728
+#define DIV_STAT_TOP_HPM 0x072c
+#define DIV_STAT_TOP_PLL_FDET 0x0730
+#define EN_ACLK_TOP 0x0800
+#define EN_SCLK_TOP 0x0a00
+#define EN_IP_TOP 0x0b00
+#define CLKOUT_CMU_TOP 0x0c00
+#define CLKOUT_CMU_TOP_DIV_STAT 0x0c04
+
+#endif /*__CLK_EXYNOS5260_H */
+
#define DIV_CPU1 0x504
#define GATE_BUS_CPU 0x700
#define GATE_SCLK_CPU 0x800
+#define CLKOUT_CMU_CPU 0xa00
+#define GATE_IP_G2D 0x8800
#define CPLL_LOCK 0x10020
#define DPLL_LOCK 0x10030
#define EPLL_LOCK 0x10040
#define RPLL_LOCK 0x10050
#define IPLL_LOCK 0x10060
#define SPLL_LOCK 0x10070
-#define VPLL_LOCK 0x10070
+#define VPLL_LOCK 0x10080
#define MPLL_LOCK 0x10090
#define CPLL_CON0 0x10120
#define DPLL_CON0 0x10128
#define EPLL_CON0 0x10130
+#define EPLL_CON1 0x10134
+#define EPLL_CON2 0x10138
#define RPLL_CON0 0x10140
+#define RPLL_CON1 0x10144
+#define RPLL_CON2 0x10148
#define IPLL_CON0 0x10150
#define SPLL_CON0 0x10160
#define VPLL_CON0 0x10170
#define SRC_TOP5 0x10214
#define SRC_TOP6 0x10218
#define SRC_TOP7 0x1021c
+#define SRC_TOP8 0x10220 /* 5800 specific */
+#define SRC_TOP9 0x10224 /* 5800 specific */
#define SRC_DISP10 0x1022c
#define SRC_MAU 0x10240
#define SRC_FSYS 0x10244
#define SRC_PERIC0 0x10250
#define SRC_PERIC1 0x10254
+#define SRC_ISP 0x10270
+#define SRC_CAM 0x10274 /* 5800 specific */
#define SRC_TOP10 0x10280
#define SRC_TOP11 0x10284
#define SRC_TOP12 0x10288
-#define SRC_MASK_DISP10 0x1032c
+#define SRC_TOP13 0x1028c /* 5800 specific */
+#define SRC_MASK_TOP2 0x10308
+#define SRC_MASK_TOP7 0x1031c
+#define SRC_MASK_DISP10 0x1032c
+#define SRC_MASK_MAU 0x10334
#define SRC_MASK_FSYS 0x10340
#define SRC_MASK_PERIC0 0x10350
#define SRC_MASK_PERIC1 0x10354
#define DIV_TOP0 0x10500
#define DIV_TOP1 0x10504
#define DIV_TOP2 0x10508
+#define DIV_TOP8 0x10520 /* 5800 specific */
+#define DIV_TOP9 0x10524 /* 5800 specific */
#define DIV_DISP10 0x1052c
#define DIV_MAU 0x10544
#define DIV_FSYS0 0x10548
#define DIV_PERIC2 0x10560
#define DIV_PERIC3 0x10564
#define DIV_PERIC4 0x10568
+#define DIV_CAM 0x10574 /* 5800 specific */
+#define SCLK_DIV_ISP0 0x10580
+#define SCLK_DIV_ISP1 0x10584
+#define DIV2_RATIO0 0x10590
+#define DIV4_RATIO 0x105a0
#define GATE_BUS_TOP 0x10700
+#define GATE_BUS_GEN 0x1073c
#define GATE_BUS_FSYS0 0x10740
+#define GATE_BUS_FSYS2 0x10748
#define GATE_BUS_PERIC 0x10750
#define GATE_BUS_PERIC1 0x10754
#define GATE_BUS_PERIS0 0x10760
#define GATE_BUS_PERIS1 0x10764
+#define GATE_BUS_NOC 0x10770
+#define GATE_TOP_SCLK_ISP 0x10870
#define GATE_IP_GSCL0 0x10910
#define GATE_IP_GSCL1 0x10920
+#define GATE_IP_CAM 0x10924 /* 5800 specific */
#define GATE_IP_MFC 0x1092c
#define GATE_IP_DISP1 0x10928
#define GATE_IP_G3D 0x10930
#define GATE_IP_GEN 0x10934
+#define GATE_IP_FSYS 0x10944
+#define GATE_IP_PERIC 0x10950
+#define GATE_IP_PERIS 0x10960
#define GATE_IP_MSCL 0x10970
#define GATE_TOP_SCLK_GSCL 0x10820
#define GATE_TOP_SCLK_DISP1 0x10828
#define GATE_TOP_SCLK_MAU 0x1083c
#define GATE_TOP_SCLK_FSYS 0x10840
#define GATE_TOP_SCLK_PERIC 0x10850
+#define TOP_SPARE2 0x10b08
#define BPLL_LOCK 0x20010
#define BPLL_CON0 0x20110
-#define SRC_CDREX 0x20200
#define KPLL_LOCK 0x28000
#define KPLL_CON0 0x28100
#define SRC_KFC 0x28200
#define DIV_KFC0 0x28500
+/* Exynos5x SoC type */
+enum exynos5x_soc {
+ EXYNOS5420,
+ EXYNOS5800,
+};
+
/* list of PLLs */
-enum exynos5420_plls {
+enum exynos5x_plls {
apll, cpll, dpll, epll, rpll, ipll, spll, vpll, mpll,
bpll, kpll,
nr_plls /* number of PLLs */
};
static void __iomem *reg_base;
+static enum exynos5x_soc exynos5x_soc;
#ifdef CONFIG_PM_SLEEP
-static struct samsung_clk_reg_dump *exynos5420_save;
+static struct samsung_clk_reg_dump *exynos5x_save;
+static struct samsung_clk_reg_dump *exynos5800_save;
/*
* list of controller registers to be saved and restored during a
* suspend/resume cycle.
*/
-static unsigned long exynos5420_clk_regs[] __initdata = {
+static unsigned long exynos5x_clk_regs[] __initdata = {
SRC_CPU,
DIV_CPU0,
DIV_CPU1,
GATE_BUS_CPU,
GATE_SCLK_CPU,
+ CLKOUT_CMU_CPU,
+ EPLL_CON0,
+ EPLL_CON1,
+ EPLL_CON2,
+ RPLL_CON0,
+ RPLL_CON1,
+ RPLL_CON2,
SRC_TOP0,
SRC_TOP1,
SRC_TOP2,
SRC_TOP10,
SRC_TOP11,
SRC_TOP12,
+ SRC_MASK_TOP2,
+ SRC_MASK_TOP7,
SRC_MASK_DISP10,
SRC_MASK_FSYS,
SRC_MASK_PERIC0,
SRC_MASK_PERIC1,
+ SRC_ISP,
DIV_TOP0,
DIV_TOP1,
DIV_TOP2,
DIV_PERIC2,
DIV_PERIC3,
DIV_PERIC4,
+ SCLK_DIV_ISP0,
+ SCLK_DIV_ISP1,
+ DIV2_RATIO0,
+ DIV4_RATIO,
GATE_BUS_TOP,
+ GATE_BUS_GEN,
GATE_BUS_FSYS0,
+ GATE_BUS_FSYS2,
GATE_BUS_PERIC,
GATE_BUS_PERIC1,
GATE_BUS_PERIS0,
GATE_BUS_PERIS1,
+ GATE_BUS_NOC,
+ GATE_TOP_SCLK_ISP,
GATE_IP_GSCL0,
GATE_IP_GSCL1,
GATE_IP_MFC,
GATE_IP_DISP1,
GATE_IP_G3D,
GATE_IP_GEN,
+ GATE_IP_FSYS,
+ GATE_IP_PERIC,
+ GATE_IP_PERIS,
GATE_IP_MSCL,
GATE_TOP_SCLK_GSCL,
GATE_TOP_SCLK_DISP1,
GATE_TOP_SCLK_MAU,
GATE_TOP_SCLK_FSYS,
GATE_TOP_SCLK_PERIC,
- SRC_CDREX,
+ TOP_SPARE2,
SRC_KFC,
DIV_KFC0,
};
+static unsigned long exynos5800_clk_regs[] __initdata = {
+ SRC_TOP8,
+ SRC_TOP9,
+ SRC_CAM,
+ SRC_TOP1,
+ DIV_TOP8,
+ DIV_TOP9,
+ DIV_CAM,
+ GATE_IP_CAM,
+};
+
static int exynos5420_clk_suspend(void)
{
- samsung_clk_save(reg_base, exynos5420_save,
- ARRAY_SIZE(exynos5420_clk_regs));
+ samsung_clk_save(reg_base, exynos5x_save,
+ ARRAY_SIZE(exynos5x_clk_regs));
+
+ if (exynos5x_soc == EXYNOS5800)
+ samsung_clk_save(reg_base, exynos5800_save,
+ ARRAY_SIZE(exynos5800_clk_regs));
return 0;
}
static void exynos5420_clk_resume(void)
{
- samsung_clk_restore(reg_base, exynos5420_save,
- ARRAY_SIZE(exynos5420_clk_regs));
+ samsung_clk_restore(reg_base, exynos5x_save,
+ ARRAY_SIZE(exynos5x_clk_regs));
+
+ if (exynos5x_soc == EXYNOS5800)
+ samsung_clk_restore(reg_base, exynos5800_save,
+ ARRAY_SIZE(exynos5800_clk_regs));
}
static struct syscore_ops exynos5420_clk_syscore_ops = {
static void exynos5420_clk_sleep_init(void)
{
- exynos5420_save = samsung_clk_alloc_reg_dump(exynos5420_clk_regs,
- ARRAY_SIZE(exynos5420_clk_regs));
- if (!exynos5420_save) {
+ exynos5x_save = samsung_clk_alloc_reg_dump(exynos5x_clk_regs,
+ ARRAY_SIZE(exynos5x_clk_regs));
+ if (!exynos5x_save) {
pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
__func__);
return;
}
+ if (exynos5x_soc == EXYNOS5800) {
+ exynos5800_save =
+ samsung_clk_alloc_reg_dump(exynos5800_clk_regs,
+ ARRAY_SIZE(exynos5800_clk_regs));
+ if (!exynos5800_save)
+ goto err_soc;
+ }
+
register_syscore_ops(&exynos5420_clk_syscore_ops);
+ return;
+err_soc:
+ kfree(exynos5x_save);
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+ return;
}
#else
static void exynos5420_clk_sleep_init(void) {}
#endif
/* list of all parent clocks */
-PNAME(mspll_cpu_p) = { "sclk_cpll", "sclk_dpll",
- "sclk_mpll", "sclk_spll" };
-PNAME(cpu_p) = { "mout_apll" , "mout_mspll_cpu" };
-PNAME(kfc_p) = { "mout_kpll" , "mout_mspll_kfc" };
-PNAME(apll_p) = { "fin_pll", "fout_apll", };
-PNAME(bpll_p) = { "fin_pll", "fout_bpll", };
-PNAME(cpll_p) = { "fin_pll", "fout_cpll", };
-PNAME(dpll_p) = { "fin_pll", "fout_dpll", };
-PNAME(epll_p) = { "fin_pll", "fout_epll", };
-PNAME(ipll_p) = { "fin_pll", "fout_ipll", };
-PNAME(kpll_p) = { "fin_pll", "fout_kpll", };
-PNAME(mpll_p) = { "fin_pll", "fout_mpll", };
-PNAME(rpll_p) = { "fin_pll", "fout_rpll", };
-PNAME(spll_p) = { "fin_pll", "fout_spll", };
-PNAME(vpll_p) = { "fin_pll", "fout_vpll", };
-
-PNAME(group1_p) = { "sclk_cpll", "sclk_dpll", "sclk_mpll" };
-PNAME(group2_p) = { "fin_pll", "sclk_cpll", "sclk_dpll", "sclk_mpll",
- "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(group3_p) = { "sclk_rpll", "sclk_spll" };
-PNAME(group4_p) = { "sclk_ipll", "sclk_dpll", "sclk_mpll" };
-PNAME(group5_p) = { "sclk_vpll", "sclk_dpll" };
-
-PNAME(sw_aclk66_p) = { "dout_aclk66", "sclk_spll" };
-PNAME(aclk66_peric_p) = { "fin_pll", "mout_sw_aclk66" };
-
-PNAME(sw_aclk200_fsys_p) = { "dout_aclk200_fsys", "sclk_spll"};
-PNAME(user_aclk200_fsys_p) = { "fin_pll", "mout_sw_aclk200_fsys" };
-
-PNAME(sw_aclk200_fsys2_p) = { "dout_aclk200_fsys2", "sclk_spll"};
-PNAME(user_aclk200_fsys2_p) = { "fin_pll", "mout_sw_aclk200_fsys2" };
-
-PNAME(sw_aclk200_p) = { "dout_aclk200", "sclk_spll"};
-PNAME(aclk200_disp1_p) = { "fin_pll", "mout_sw_aclk200" };
-
-PNAME(sw_aclk400_mscl_p) = { "dout_aclk400_mscl", "sclk_spll"};
-PNAME(user_aclk400_mscl_p) = { "fin_pll", "mout_sw_aclk400_mscl" };
-
-PNAME(sw_aclk333_p) = { "dout_aclk333", "sclk_spll"};
-PNAME(user_aclk333_p) = { "fin_pll", "mout_sw_aclk333" };
-
-PNAME(sw_aclk166_p) = { "dout_aclk166", "sclk_spll"};
-PNAME(user_aclk166_p) = { "fin_pll", "mout_sw_aclk166" };
-
-PNAME(sw_aclk266_p) = { "dout_aclk266", "sclk_spll"};
-PNAME(user_aclk266_p) = { "fin_pll", "mout_sw_aclk266" };
-
-PNAME(sw_aclk333_432_gscl_p) = { "dout_aclk333_432_gscl", "sclk_spll"};
-PNAME(user_aclk333_432_gscl_p) = { "fin_pll", "mout_sw_aclk333_432_gscl" };
-
-PNAME(sw_aclk300_gscl_p) = { "dout_aclk300_gscl", "sclk_spll"};
-PNAME(user_aclk300_gscl_p) = { "fin_pll", "mout_sw_aclk300_gscl" };
-
-PNAME(sw_aclk300_disp1_p) = { "dout_aclk300_disp1", "sclk_spll"};
-PNAME(user_aclk300_disp1_p) = { "fin_pll", "mout_sw_aclk300_disp1" };
-
-PNAME(sw_aclk300_jpeg_p) = { "dout_aclk300_jpeg", "sclk_spll"};
-PNAME(user_aclk300_jpeg_p) = { "fin_pll", "mout_sw_aclk300_jpeg" };
-
-PNAME(sw_aclk_g3d_p) = { "dout_aclk_g3d", "sclk_spll"};
-PNAME(user_aclk_g3d_p) = { "fin_pll", "mout_sw_aclk_g3d" };
-
-PNAME(sw_aclk266_g2d_p) = { "dout_aclk266_g2d", "sclk_spll"};
-PNAME(user_aclk266_g2d_p) = { "fin_pll", "mout_sw_aclk266_g2d" };
-
-PNAME(sw_aclk333_g2d_p) = { "dout_aclk333_g2d", "sclk_spll"};
-PNAME(user_aclk333_g2d_p) = { "fin_pll", "mout_sw_aclk333_g2d" };
-
-PNAME(audio0_p) = { "fin_pll", "cdclk0", "sclk_dpll", "sclk_mpll",
- "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(audio1_p) = { "fin_pll", "cdclk1", "sclk_dpll", "sclk_mpll",
- "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(audio2_p) = { "fin_pll", "cdclk2", "sclk_dpll", "sclk_mpll",
- "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(spdif_p) = { "fin_pll", "dout_audio0", "dout_audio1", "dout_audio2",
- "spdif_extclk", "sclk_ipll", "sclk_epll", "sclk_rpll" };
-PNAME(hdmi_p) = { "dout_hdmi_pixel", "sclk_hdmiphy" };
-PNAME(maudio0_p) = { "fin_pll", "maudio_clk", "sclk_dpll", "sclk_mpll",
- "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
+PNAME(mout_mspll_cpu_p) = {"mout_sclk_cpll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll"};
+PNAME(mout_cpu_p) = {"mout_apll" , "mout_mspll_cpu"};
+PNAME(mout_kfc_p) = {"mout_kpll" , "mout_mspll_kfc"};
+PNAME(mout_apll_p) = {"fin_pll", "fout_apll"};
+PNAME(mout_bpll_p) = {"fin_pll", "fout_bpll"};
+PNAME(mout_cpll_p) = {"fin_pll", "fout_cpll"};
+PNAME(mout_dpll_p) = {"fin_pll", "fout_dpll"};
+PNAME(mout_epll_p) = {"fin_pll", "fout_epll"};
+PNAME(mout_ipll_p) = {"fin_pll", "fout_ipll"};
+PNAME(mout_kpll_p) = {"fin_pll", "fout_kpll"};
+PNAME(mout_mpll_p) = {"fin_pll", "fout_mpll"};
+PNAME(mout_rpll_p) = {"fin_pll", "fout_rpll"};
+PNAME(mout_spll_p) = {"fin_pll", "fout_spll"};
+PNAME(mout_vpll_p) = {"fin_pll", "fout_vpll"};
+
+PNAME(mout_group1_p) = {"mout_sclk_cpll", "mout_sclk_dpll",
+ "mout_sclk_mpll"};
+PNAME(mout_group2_p) = {"fin_pll", "mout_sclk_cpll",
+ "mout_sclk_dpll", "mout_sclk_mpll", "mout_sclk_spll",
+ "mout_sclk_ipll", "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_group3_p) = {"mout_sclk_rpll", "mout_sclk_spll"};
+PNAME(mout_group4_p) = {"mout_sclk_ipll", "mout_sclk_dpll", "mout_sclk_mpll"};
+PNAME(mout_group5_p) = {"mout_sclk_vpll", "mout_sclk_dpll"};
+
+PNAME(mout_fimd1_final_p) = {"mout_fimd1", "mout_fimd1_opt"};
+PNAME(mout_sw_aclk66_p) = {"dout_aclk66", "mout_sclk_spll"};
+PNAME(mout_user_aclk66_peric_p) = { "fin_pll", "mout_sw_aclk66"};
+PNAME(mout_user_pclk66_gpio_p) = {"mout_sw_aclk66", "ff_sw_aclk66"};
+
+PNAME(mout_sw_aclk200_fsys_p) = {"dout_aclk200_fsys", "mout_sclk_spll"};
+PNAME(mout_sw_pclk200_fsys_p) = {"dout_pclk200_fsys", "mout_sclk_spll"};
+PNAME(mout_user_pclk200_fsys_p) = {"fin_pll", "mout_sw_pclk200_fsys"};
+PNAME(mout_user_aclk200_fsys_p) = {"fin_pll", "mout_sw_aclk200_fsys"};
+
+PNAME(mout_sw_aclk200_fsys2_p) = {"dout_aclk200_fsys2", "mout_sclk_spll"};
+PNAME(mout_user_aclk200_fsys2_p) = {"fin_pll", "mout_sw_aclk200_fsys2"};
+PNAME(mout_sw_aclk100_noc_p) = {"dout_aclk100_noc", "mout_sclk_spll"};
+PNAME(mout_user_aclk100_noc_p) = {"fin_pll", "mout_sw_aclk100_noc"};
+
+PNAME(mout_sw_aclk400_wcore_p) = {"dout_aclk400_wcore", "mout_sclk_spll"};
+PNAME(mout_aclk400_wcore_bpll_p) = {"mout_aclk400_wcore", "sclk_bpll"};
+PNAME(mout_user_aclk400_wcore_p) = {"fin_pll", "mout_sw_aclk400_wcore"};
+
+PNAME(mout_sw_aclk400_isp_p) = {"dout_aclk400_isp", "mout_sclk_spll"};
+PNAME(mout_user_aclk400_isp_p) = {"fin_pll", "mout_sw_aclk400_isp"};
+
+PNAME(mout_sw_aclk333_432_isp0_p) = {"dout_aclk333_432_isp0",
+ "mout_sclk_spll"};
+PNAME(mout_user_aclk333_432_isp0_p) = {"fin_pll", "mout_sw_aclk333_432_isp0"};
+
+PNAME(mout_sw_aclk333_432_isp_p) = {"dout_aclk333_432_isp", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_432_isp_p) = {"fin_pll", "mout_sw_aclk333_432_isp"};
+
+PNAME(mout_sw_aclk200_p) = {"dout_aclk200", "mout_sclk_spll"};
+PNAME(mout_user_aclk200_disp1_p) = {"fin_pll", "mout_sw_aclk200"};
+
+PNAME(mout_sw_aclk400_mscl_p) = {"dout_aclk400_mscl", "mout_sclk_spll"};
+PNAME(mout_user_aclk400_mscl_p) = {"fin_pll", "mout_sw_aclk400_mscl"};
+
+PNAME(mout_sw_aclk333_p) = {"dout_aclk333", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_p) = {"fin_pll", "mout_sw_aclk333"};
+
+PNAME(mout_sw_aclk166_p) = {"dout_aclk166", "mout_sclk_spll"};
+PNAME(mout_user_aclk166_p) = {"fin_pll", "mout_sw_aclk166"};
+
+PNAME(mout_sw_aclk266_p) = {"dout_aclk266", "mout_sclk_spll"};
+PNAME(mout_user_aclk266_p) = {"fin_pll", "mout_sw_aclk266"};
+PNAME(mout_user_aclk266_isp_p) = {"fin_pll", "mout_sw_aclk266"};
+
+PNAME(mout_sw_aclk333_432_gscl_p) = {"dout_aclk333_432_gscl", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_432_gscl_p) = {"fin_pll", "mout_sw_aclk333_432_gscl"};
+
+PNAME(mout_sw_aclk300_gscl_p) = {"dout_aclk300_gscl", "mout_sclk_spll"};
+PNAME(mout_user_aclk300_gscl_p) = {"fin_pll", "mout_sw_aclk300_gscl"};
+
+PNAME(mout_sw_aclk300_disp1_p) = {"dout_aclk300_disp1", "mout_sclk_spll"};
+PNAME(mout_sw_aclk400_disp1_p) = {"dout_aclk400_disp1", "mout_sclk_spll"};
+PNAME(mout_user_aclk300_disp1_p) = {"fin_pll", "mout_sw_aclk300_disp1"};
+PNAME(mout_user_aclk400_disp1_p) = {"fin_pll", "mout_sw_aclk400_disp1"};
+
+PNAME(mout_sw_aclk300_jpeg_p) = {"dout_aclk300_jpeg", "mout_sclk_spll"};
+PNAME(mout_user_aclk300_jpeg_p) = {"fin_pll", "mout_sw_aclk300_jpeg"};
+
+PNAME(mout_sw_aclk_g3d_p) = {"dout_aclk_g3d", "mout_sclk_spll"};
+PNAME(mout_user_aclk_g3d_p) = {"fin_pll", "mout_sw_aclk_g3d"};
+
+PNAME(mout_sw_aclk266_g2d_p) = {"dout_aclk266_g2d", "mout_sclk_spll"};
+PNAME(mout_user_aclk266_g2d_p) = {"fin_pll", "mout_sw_aclk266_g2d"};
+
+PNAME(mout_sw_aclk333_g2d_p) = {"dout_aclk333_g2d", "mout_sclk_spll"};
+PNAME(mout_user_aclk333_g2d_p) = {"fin_pll", "mout_sw_aclk333_g2d"};
+
+PNAME(mout_audio0_p) = {"fin_pll", "cdclk0", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+ "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_audio1_p) = {"fin_pll", "cdclk1", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+ "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_audio2_p) = {"fin_pll", "cdclk2", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+ "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_spdif_p) = {"fin_pll", "dout_audio0", "dout_audio1",
+ "dout_audio2", "spdif_extclk", "mout_sclk_ipll",
+ "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_hdmi_p) = {"dout_hdmi_pixel", "sclk_hdmiphy"};
+PNAME(mout_maudio0_p) = {"fin_pll", "maudio_clk", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll", "mout_sclk_ipll",
+ "mout_sclk_epll", "mout_sclk_rpll"};
+PNAME(mout_mau_epll_clk_p) = {"mout_sclk_epll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll"};
+/* List of parents specific to exynos5800 */
+PNAME(mout_epll2_5800_p) = { "mout_sclk_epll", "ff_dout_epll2" };
+PNAME(mout_group1_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "ff_dout_spll2" };
+PNAME(mout_group2_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "ff_dout_spll2",
+ "mout_epll2", "mout_sclk_ipll" };
+PNAME(mout_group3_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "ff_dout_spll2",
+ "mout_epll2" };
+PNAME(mout_group5_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll" };
+PNAME(mout_group6_5800_p) = { "mout_sclk_ipll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "ff_dout_spll2" };
+PNAME(mout_group7_5800_p) = { "mout_sclk_cpll", "mout_sclk_dpll",
+ "mout_sclk_mpll", "mout_sclk_spll",
+ "mout_epll2", "mout_sclk_ipll" };
+PNAME(mout_mau_epll_clk_5800_p) = { "mout_sclk_epll", "mout_sclk_dpll",
+ "mout_sclk_mpll",
+ "ff_dout_spll2" };
+PNAME(mout_group8_5800_p) = { "dout_aclk432_scaler", "dout_sclk_sw" };
+PNAME(mout_group9_5800_p) = { "dout_osc_div", "mout_sw_aclk432_scaler" };
+PNAME(mout_group10_5800_p) = { "dout_aclk432_cam", "dout_sclk_sw" };
+PNAME(mout_group11_5800_p) = { "dout_osc_div", "mout_sw_aclk432_cam" };
+PNAME(mout_group12_5800_p) = { "dout_aclkfl1_550_cam", "dout_sclk_sw" };
+PNAME(mout_group13_5800_p) = { "dout_osc_div", "mout_sw_aclkfl1_550_cam" };
+PNAME(mout_group14_5800_p) = { "dout_aclk550_cam", "dout_sclk_sw" };
+PNAME(mout_group15_5800_p) = { "dout_osc_div", "mout_sw_aclk550_cam" };
/* fixed rate clocks generated outside the soc */
-static struct samsung_fixed_rate_clock exynos5420_fixed_rate_ext_clks[] __initdata = {
+static struct samsung_fixed_rate_clock
+ exynos5x_fixed_rate_ext_clks[] __initdata = {
FRATE(CLK_FIN_PLL, "fin_pll", NULL, CLK_IS_ROOT, 0),
};
/* fixed rate clocks generated inside the soc */
-static struct samsung_fixed_rate_clock exynos5420_fixed_rate_clks[] __initdata = {
+static struct samsung_fixed_rate_clock exynos5x_fixed_rate_clks[] __initdata = {
FRATE(CLK_SCLK_HDMIPHY, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 24000000),
FRATE(0, "sclk_pwi", NULL, CLK_IS_ROOT, 24000000),
FRATE(0, "sclk_usbh20", NULL, CLK_IS_ROOT, 48000000),
FRATE(0, "sclk_usbh20_scan_clk", NULL, CLK_IS_ROOT, 480000000),
};
-static struct samsung_fixed_factor_clock exynos5420_fixed_factor_clks[] __initdata = {
- FFACTOR(0, "sclk_hsic_12m", "fin_pll", 1, 2, 0),
+static struct samsung_fixed_factor_clock
+ exynos5x_fixed_factor_clks[] __initdata = {
+ FFACTOR(0, "ff_hsic_12m", "fin_pll", 1, 2, 0),
+ FFACTOR(0, "ff_sw_aclk66", "mout_sw_aclk66", 1, 2, 0),
};
-static struct samsung_mux_clock exynos5420_mux_clks[] __initdata = {
- MUX(0, "mout_mspll_kfc", mspll_cpu_p, SRC_TOP7, 8, 2),
- MUX(0, "mout_mspll_cpu", mspll_cpu_p, SRC_TOP7, 12, 2),
- MUX(0, "mout_apll", apll_p, SRC_CPU, 0, 1),
- MUX(0, "mout_cpu", cpu_p, SRC_CPU, 16, 1),
- MUX(0, "mout_kpll", kpll_p, SRC_KFC, 0, 1),
- MUX(0, "mout_cpu_kfc", kfc_p, SRC_KFC, 16, 1),
-
- MUX(0, "sclk_bpll", bpll_p, SRC_CDREX, 0, 1),
-
- MUX_A(0, "mout_aclk400_mscl", group1_p,
- SRC_TOP0, 4, 2, "aclk400_mscl"),
- MUX(0, "mout_aclk200", group1_p, SRC_TOP0, 8, 2),
- MUX(0, "mout_aclk200_fsys2", group1_p, SRC_TOP0, 12, 2),
- MUX(0, "mout_aclk200_fsys", group1_p, SRC_TOP0, 28, 2),
-
- MUX(0, "mout_aclk333_432_gscl", group4_p, SRC_TOP1, 0, 2),
- MUX(0, "mout_aclk66", group1_p, SRC_TOP1, 8, 2),
- MUX(0, "mout_aclk266", group1_p, SRC_TOP1, 20, 2),
- MUX(0, "mout_aclk166", group1_p, SRC_TOP1, 24, 2),
- MUX(0, "mout_aclk333", group1_p, SRC_TOP1, 28, 2),
-
- MUX(0, "mout_aclk333_g2d", group1_p, SRC_TOP2, 8, 2),
- MUX(0, "mout_aclk266_g2d", group1_p, SRC_TOP2, 12, 2),
- MUX(0, "mout_aclk_g3d", group5_p, SRC_TOP2, 16, 1),
- MUX(0, "mout_aclk300_jpeg", group1_p, SRC_TOP2, 20, 2),
- MUX(0, "mout_aclk300_disp1", group1_p, SRC_TOP2, 24, 2),
- MUX(0, "mout_aclk300_gscl", group1_p, SRC_TOP2, 28, 2),
-
- MUX(0, "mout_user_aclk400_mscl", user_aclk400_mscl_p,
+static struct samsung_fixed_factor_clock
+ exynos5800_fixed_factor_clks[] __initdata = {
+ FFACTOR(0, "ff_dout_epll2", "mout_sclk_epll", 1, 2, 0),
+ FFACTOR(0, "ff_dout_spll2", "mout_sclk_spll", 1, 2, 0),
+};
+
+struct samsung_mux_clock exynos5800_mux_clks[] __initdata = {
+ MUX(0, "mout_aclk400_isp", mout_group3_5800_p, SRC_TOP0, 0, 3),
+ MUX(0, "mout_aclk400_mscl", mout_group3_5800_p, SRC_TOP0, 4, 3),
+ MUX(0, "mout_aclk400_wcore", mout_group2_5800_p, SRC_TOP0, 16, 3),
+ MUX(0, "mout_aclk100_noc", mout_group1_5800_p, SRC_TOP0, 20, 2),
+
+ MUX(0, "mout_aclk333_432_gscl", mout_group6_5800_p, SRC_TOP1, 0, 2),
+ MUX(0, "mout_aclk333_432_isp", mout_group6_5800_p, SRC_TOP1, 4, 2),
+ MUX(0, "mout_aclk333_432_isp0", mout_group6_5800_p, SRC_TOP1, 12, 2),
+ MUX(0, "mout_aclk266", mout_group5_5800_p, SRC_TOP1, 20, 2),
+ MUX(0, "mout_aclk333", mout_group1_5800_p, SRC_TOP1, 28, 2),
+
+ MUX(0, "mout_aclk400_disp1", mout_group7_5800_p, SRC_TOP2, 4, 3),
+ MUX(0, "mout_aclk333_g2d", mout_group5_5800_p, SRC_TOP2, 8, 2),
+ MUX(0, "mout_aclk266_g2d", mout_group5_5800_p, SRC_TOP2, 12, 2),
+ MUX(0, "mout_aclk300_jpeg", mout_group5_5800_p, SRC_TOP2, 20, 2),
+ MUX(0, "mout_aclk300_disp1", mout_group5_5800_p, SRC_TOP2, 24, 2),
+ MUX(0, "mout_aclk300_gscl", mout_group5_5800_p, SRC_TOP2, 28, 2),
+
+ MUX(0, "mout_mau_epll_clk", mout_mau_epll_clk_5800_p, SRC_TOP7,
+ 20, 2),
+ MUX(0, "sclk_bpll", mout_bpll_p, SRC_TOP7, 24, 1),
+ MUX(0, "mout_epll2", mout_epll2_5800_p, SRC_TOP7, 28, 1),
+
+ MUX(0, "mout_aclk550_cam", mout_group3_5800_p, SRC_TOP8, 16, 3),
+ MUX(0, "mout_aclkfl1_550_cam", mout_group3_5800_p, SRC_TOP8, 20, 3),
+ MUX(0, "mout_aclk432_cam", mout_group6_5800_p, SRC_TOP8, 24, 2),
+ MUX(0, "mout_aclk432_scaler", mout_group6_5800_p, SRC_TOP8, 28, 2),
+
+ MUX(0, "mout_user_aclk550_cam", mout_group15_5800_p,
+ SRC_TOP9, 16, 1),
+ MUX(0, "mout_user_aclkfl1_550_cam", mout_group13_5800_p,
+ SRC_TOP9, 20, 1),
+ MUX(0, "mout_user_aclk432_cam", mout_group11_5800_p,
+ SRC_TOP9, 24, 1),
+ MUX(0, "mout_user_aclk432_scaler", mout_group9_5800_p,
+ SRC_TOP9, 28, 1),
+
+ MUX(0, "mout_sw_aclk550_cam", mout_group14_5800_p, SRC_TOP13, 16, 1),
+ MUX(0, "mout_sw_aclkfl1_550_cam", mout_group12_5800_p,
+ SRC_TOP13, 20, 1),
+ MUX(0, "mout_sw_aclk432_cam", mout_group10_5800_p,
+ SRC_TOP13, 24, 1),
+ MUX(0, "mout_sw_aclk432_scaler", mout_group8_5800_p,
+ SRC_TOP13, 28, 1),
+
+ MUX(0, "mout_fimd1", mout_group2_p, SRC_DISP10, 4, 3),
+};
+
+struct samsung_div_clock exynos5800_div_clks[] __initdata = {
+ DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore", DIV_TOP0, 16, 3),
+
+ DIV(0, "dout_aclk550_cam", "mout_aclk550_cam",
+ DIV_TOP8, 16, 3),
+ DIV(0, "dout_aclkfl1_550_cam", "mout_aclkfl1_550_cam",
+ DIV_TOP8, 20, 3),
+ DIV(0, "dout_aclk432_cam", "mout_aclk432_cam",
+ DIV_TOP8, 24, 3),
+ DIV(0, "dout_aclk432_scaler", "mout_aclk432_scaler",
+ DIV_TOP8, 28, 3),
+
+ DIV(0, "dout_osc_div", "fin_pll", DIV_TOP9, 20, 3),
+ DIV(0, "dout_sclk_sw", "sclk_spll", DIV_TOP9, 24, 6),
+};
+
+struct samsung_gate_clock exynos5800_gate_clks[] __initdata = {
+ GATE(CLK_ACLK550_CAM, "aclk550_cam", "mout_user_aclk550_cam",
+ GATE_BUS_TOP, 24, 0, 0),
+ GATE(CLK_ACLK432_SCALER, "aclk432_scaler", "mout_user_aclk432_scaler",
+ GATE_BUS_TOP, 27, 0, 0),
+};
+
+struct samsung_mux_clock exynos5420_mux_clks[] __initdata = {
+ MUX(0, "sclk_bpll", mout_bpll_p, TOP_SPARE2, 0, 1),
+ MUX(0, "mout_aclk400_wcore_bpll", mout_aclk400_wcore_bpll_p,
+ TOP_SPARE2, 4, 1),
+
+ MUX(0, "mout_aclk400_isp", mout_group1_p, SRC_TOP0, 0, 2),
+ MUX_A(0, "mout_aclk400_mscl", mout_group1_p,
+ SRC_TOP0, 4, 2, "aclk400_mscl"),
+ MUX(0, "mout_aclk400_wcore", mout_group1_p, SRC_TOP0, 16, 2),
+ MUX(0, "mout_aclk100_noc", mout_group1_p, SRC_TOP0, 20, 2),
+
+ MUX(0, "mout_aclk333_432_gscl", mout_group4_p, SRC_TOP1, 0, 2),
+ MUX(0, "mout_aclk333_432_isp", mout_group4_p,
+ SRC_TOP1, 4, 2),
+ MUX(0, "mout_aclk333_432_isp0", mout_group4_p, SRC_TOP1, 12, 2),
+ MUX(0, "mout_aclk266", mout_group1_p, SRC_TOP1, 20, 2),
+ MUX(0, "mout_aclk333", mout_group1_p, SRC_TOP1, 28, 2),
+
+ MUX(0, "mout_aclk400_disp1", mout_group1_p, SRC_TOP2, 4, 2),
+ MUX(0, "mout_aclk333_g2d", mout_group1_p, SRC_TOP2, 8, 2),
+ MUX(0, "mout_aclk266_g2d", mout_group1_p, SRC_TOP2, 12, 2),
+ MUX(0, "mout_aclk300_jpeg", mout_group1_p, SRC_TOP2, 20, 2),
+ MUX(0, "mout_aclk300_disp1", mout_group1_p, SRC_TOP2, 24, 2),
+ MUX(0, "mout_aclk300_gscl", mout_group1_p, SRC_TOP2, 28, 2),
+
+ MUX(0, "mout_mau_epll_clk", mout_mau_epll_clk_p, SRC_TOP7, 20, 2),
+
+ MUX(0, "mout_fimd1", mout_group3_p, SRC_DISP10, 4, 1),
+};
+
+struct samsung_div_clock exynos5420_div_clks[] __initdata = {
+ DIV(0, "dout_aclk400_wcore", "mout_aclk400_wcore_bpll",
+ DIV_TOP0, 16, 3),
+};
+
+static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = {
+ MUX(0, "mout_user_pclk66_gpio", mout_user_pclk66_gpio_p,
+ SRC_TOP7, 4, 1),
+ MUX(0, "mout_mspll_kfc", mout_mspll_cpu_p, SRC_TOP7, 8, 2),
+ MUX(0, "mout_mspll_cpu", mout_mspll_cpu_p, SRC_TOP7, 12, 2),
+
+ MUX(0, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
+ MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
+ MUX(0, "mout_kpll", mout_kpll_p, SRC_KFC, 0, 1),
+ MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1),
+
+ MUX(0, "mout_aclk200", mout_group1_p, SRC_TOP0, 8, 2),
+ MUX(0, "mout_aclk200_fsys2", mout_group1_p, SRC_TOP0, 12, 2),
+ MUX(0, "mout_pclk200_fsys", mout_group1_p, SRC_TOP0, 24, 2),
+ MUX(0, "mout_aclk200_fsys", mout_group1_p, SRC_TOP0, 28, 2),
+
+ MUX(0, "mout_aclk66", mout_group1_p, SRC_TOP1, 8, 2),
+ MUX(0, "mout_aclk166", mout_group1_p, SRC_TOP1, 24, 2),
+
+ MUX(0, "mout_aclk_g3d", mout_group5_p, SRC_TOP2, 16, 1),
+
+ MUX(0, "mout_user_aclk400_isp", mout_user_aclk400_isp_p,
+ SRC_TOP3, 0, 1),
+ MUX(0, "mout_user_aclk400_mscl", mout_user_aclk400_mscl_p,
SRC_TOP3, 4, 1),
- MUX_A(0, "mout_aclk200_disp1", aclk200_disp1_p,
- SRC_TOP3, 8, 1, "aclk200_disp1"),
- MUX(0, "mout_user_aclk200_fsys2", user_aclk200_fsys2_p,
+ MUX(0, "mout_user_aclk200_disp1", mout_user_aclk200_disp1_p,
+ SRC_TOP3, 8, 1),
+ MUX(0, "mout_user_aclk200_fsys2", mout_user_aclk200_fsys2_p,
SRC_TOP3, 12, 1),
- MUX(0, "mout_user_aclk200_fsys", user_aclk200_fsys_p,
+ MUX(0, "mout_user_aclk400_wcore", mout_user_aclk400_wcore_p,
+ SRC_TOP3, 16, 1),
+ MUX(0, "mout_user_aclk100_noc", mout_user_aclk100_noc_p,
+ SRC_TOP3, 20, 1),
+ MUX(0, "mout_user_pclk200_fsys", mout_user_pclk200_fsys_p,
+ SRC_TOP3, 24, 1),
+ MUX(0, "mout_user_aclk200_fsys", mout_user_aclk200_fsys_p,
SRC_TOP3, 28, 1),
- MUX(0, "mout_user_aclk333_432_gscl", user_aclk333_432_gscl_p,
+ MUX(0, "mout_user_aclk333_432_gscl", mout_user_aclk333_432_gscl_p,
SRC_TOP4, 0, 1),
- MUX(0, "mout_aclk66_peric", aclk66_peric_p, SRC_TOP4, 8, 1),
- MUX(0, "mout_user_aclk266", user_aclk266_p, SRC_TOP4, 20, 1),
- MUX(0, "mout_user_aclk166", user_aclk166_p, SRC_TOP4, 24, 1),
- MUX(0, "mout_user_aclk333", user_aclk333_p, SRC_TOP4, 28, 1),
-
- MUX(0, "mout_aclk66_psgen", aclk66_peric_p, SRC_TOP5, 4, 1),
- MUX(0, "mout_user_aclk333_g2d", user_aclk333_g2d_p, SRC_TOP5, 8, 1),
- MUX(0, "mout_user_aclk266_g2d", user_aclk266_g2d_p, SRC_TOP5, 12, 1),
- MUX_A(0, "mout_user_aclk_g3d", user_aclk_g3d_p,
- SRC_TOP5, 16, 1, "aclkg3d"),
- MUX(0, "mout_user_aclk300_jpeg", user_aclk300_jpeg_p,
+ MUX(0, "mout_user_aclk333_432_isp", mout_user_aclk333_432_isp_p,
+ SRC_TOP4, 4, 1),
+ MUX(0, "mout_user_aclk66_peric", mout_user_aclk66_peric_p,
+ SRC_TOP4, 8, 1),
+ MUX(0, "mout_user_aclk333_432_isp0", mout_user_aclk333_432_isp0_p,
+ SRC_TOP4, 12, 1),
+ MUX(0, "mout_user_aclk266_isp", mout_user_aclk266_isp_p,
+ SRC_TOP4, 16, 1),
+ MUX(0, "mout_user_aclk266", mout_user_aclk266_p, SRC_TOP4, 20, 1),
+ MUX(0, "mout_user_aclk166", mout_user_aclk166_p, SRC_TOP4, 24, 1),
+ MUX(0, "mout_user_aclk333", mout_user_aclk333_p, SRC_TOP4, 28, 1),
+
+ MUX(0, "mout_user_aclk400_disp1", mout_user_aclk400_disp1_p,
+ SRC_TOP5, 0, 1),
+ MUX(0, "mout_user_aclk66_psgen", mout_user_aclk66_peric_p,
+ SRC_TOP5, 4, 1),
+ MUX(0, "mout_user_aclk333_g2d", mout_user_aclk333_g2d_p,
+ SRC_TOP5, 8, 1),
+ MUX(0, "mout_user_aclk266_g2d", mout_user_aclk266_g2d_p,
+ SRC_TOP5, 12, 1),
+ MUX(CLK_MOUT_G3D, "mout_user_aclk_g3d", mout_user_aclk_g3d_p,
+ SRC_TOP5, 16, 1),
+ MUX(0, "mout_user_aclk300_jpeg", mout_user_aclk300_jpeg_p,
SRC_TOP5, 20, 1),
- MUX(0, "mout_user_aclk300_disp1", user_aclk300_disp1_p,
+ MUX(0, "mout_user_aclk300_disp1", mout_user_aclk300_disp1_p,
SRC_TOP5, 24, 1),
- MUX(0, "mout_user_aclk300_gscl", user_aclk300_gscl_p,
+ MUX(0, "mout_user_aclk300_gscl", mout_user_aclk300_gscl_p,
SRC_TOP5, 28, 1),
- MUX(0, "sclk_mpll", mpll_p, SRC_TOP6, 0, 1),
- MUX(0, "sclk_vpll", vpll_p, SRC_TOP6, 4, 1),
- MUX(0, "sclk_spll", spll_p, SRC_TOP6, 8, 1),
- MUX(0, "sclk_ipll", ipll_p, SRC_TOP6, 12, 1),
- MUX(0, "sclk_rpll", rpll_p, SRC_TOP6, 16, 1),
- MUX(0, "sclk_epll", epll_p, SRC_TOP6, 20, 1),
- MUX(0, "sclk_dpll", dpll_p, SRC_TOP6, 24, 1),
- MUX(0, "sclk_cpll", cpll_p, SRC_TOP6, 28, 1),
-
- MUX(0, "mout_sw_aclk400_mscl", sw_aclk400_mscl_p, SRC_TOP10, 4, 1),
- MUX(0, "mout_sw_aclk200", sw_aclk200_p, SRC_TOP10, 8, 1),
- MUX(0, "mout_sw_aclk200_fsys2", sw_aclk200_fsys2_p,
+ MUX(0, "mout_sclk_mpll", mout_mpll_p, SRC_TOP6, 0, 1),
+ MUX(CLK_MOUT_VPLL, "mout_sclk_vpll", mout_vpll_p, SRC_TOP6, 4, 1),
+ MUX(0, "mout_sclk_spll", mout_spll_p, SRC_TOP6, 8, 1),
+ MUX(0, "mout_sclk_ipll", mout_ipll_p, SRC_TOP6, 12, 1),
+ MUX(0, "mout_sclk_rpll", mout_rpll_p, SRC_TOP6, 16, 1),
+ MUX(0, "mout_sclk_epll", mout_epll_p, SRC_TOP6, 20, 1),
+ MUX(0, "mout_sclk_dpll", mout_dpll_p, SRC_TOP6, 24, 1),
+ MUX(0, "mout_sclk_cpll", mout_cpll_p, SRC_TOP6, 28, 1),
+
+ MUX(0, "mout_sw_aclk400_isp", mout_sw_aclk400_isp_p,
+ SRC_TOP10, 0, 1),
+ MUX(0, "mout_sw_aclk400_mscl", mout_sw_aclk400_mscl_p,
+ SRC_TOP10, 4, 1),
+ MUX(0, "mout_sw_aclk200", mout_sw_aclk200_p, SRC_TOP10, 8, 1),
+ MUX(0, "mout_sw_aclk200_fsys2", mout_sw_aclk200_fsys2_p,
SRC_TOP10, 12, 1),
- MUX(0, "mout_sw_aclk200_fsys", sw_aclk200_fsys_p, SRC_TOP10, 28, 1),
-
- MUX(0, "mout_sw_aclk333_432_gscl", sw_aclk333_432_gscl_p,
+ MUX(0, "mout_sw_aclk400_wcore", mout_sw_aclk400_wcore_p,
+ SRC_TOP10, 16, 1),
+ MUX(0, "mout_sw_aclk100_noc", mout_sw_aclk100_noc_p,
+ SRC_TOP10, 20, 1),
+ MUX(0, "mout_sw_pclk200_fsys", mout_sw_pclk200_fsys_p,
+ SRC_TOP10, 24, 1),
+ MUX(0, "mout_sw_aclk200_fsys", mout_sw_aclk200_fsys_p,
+ SRC_TOP10, 28, 1),
+
+ MUX(0, "mout_sw_aclk333_432_gscl", mout_sw_aclk333_432_gscl_p,
SRC_TOP11, 0, 1),
- MUX(0, "mout_sw_aclk66", sw_aclk66_p, SRC_TOP11, 8, 1),
- MUX(0, "mout_sw_aclk266", sw_aclk266_p, SRC_TOP11, 20, 1),
- MUX(0, "mout_sw_aclk166", sw_aclk166_p, SRC_TOP11, 24, 1),
- MUX(0, "mout_sw_aclk333", sw_aclk333_p, SRC_TOP11, 28, 1),
-
- MUX(0, "mout_sw_aclk333_g2d", sw_aclk333_g2d_p, SRC_TOP12, 8, 1),
- MUX(0, "mout_sw_aclk266_g2d", sw_aclk266_g2d_p, SRC_TOP12, 12, 1),
- MUX(0, "mout_sw_aclk_g3d", sw_aclk_g3d_p, SRC_TOP12, 16, 1),
- MUX(0, "mout_sw_aclk300_jpeg", sw_aclk300_jpeg_p, SRC_TOP12, 20, 1),
- MUX(0, "mout_sw_aclk300_disp1", sw_aclk300_disp1_p,
+ MUX(0, "mout_sw_aclk333_432_isp", mout_sw_aclk333_432_isp_p,
+ SRC_TOP11, 4, 1),
+ MUX(0, "mout_sw_aclk66", mout_sw_aclk66_p, SRC_TOP11, 8, 1),
+ MUX(0, "mout_sw_aclk333_432_isp0", mout_sw_aclk333_432_isp0_p,
+ SRC_TOP11, 12, 1),
+ MUX(0, "mout_sw_aclk266", mout_sw_aclk266_p, SRC_TOP11, 20, 1),
+ MUX(0, "mout_sw_aclk166", mout_sw_aclk166_p, SRC_TOP11, 24, 1),
+ MUX(0, "mout_sw_aclk333", mout_sw_aclk333_p, SRC_TOP11, 28, 1),
+
+ MUX(0, "mout_sw_aclk400_disp1", mout_sw_aclk400_disp1_p,
+ SRC_TOP12, 4, 1),
+ MUX(0, "mout_sw_aclk333_g2d", mout_sw_aclk333_g2d_p,
+ SRC_TOP12, 8, 1),
+ MUX(0, "mout_sw_aclk266_g2d", mout_sw_aclk266_g2d_p,
+ SRC_TOP12, 12, 1),
+ MUX(0, "mout_sw_aclk_g3d", mout_sw_aclk_g3d_p, SRC_TOP12, 16, 1),
+ MUX(0, "mout_sw_aclk300_jpeg", mout_sw_aclk300_jpeg_p,
+ SRC_TOP12, 20, 1),
+ MUX(0, "mout_sw_aclk300_disp1", mout_sw_aclk300_disp1_p,
SRC_TOP12, 24, 1),
- MUX(0, "mout_sw_aclk300_gscl", sw_aclk300_gscl_p, SRC_TOP12, 28, 1),
+ MUX(0, "mout_sw_aclk300_gscl", mout_sw_aclk300_gscl_p,
+ SRC_TOP12, 28, 1),
/* DISP1 Block */
- MUX(0, "mout_fimd1", group3_p, SRC_DISP10, 4, 1),
- MUX(0, "mout_mipi1", group2_p, SRC_DISP10, 16, 3),
- MUX(0, "mout_dp1", group2_p, SRC_DISP10, 20, 3),
- MUX(0, "mout_pixel", group2_p, SRC_DISP10, 24, 3),
- MUX(CLK_MOUT_HDMI, "mout_hdmi", hdmi_p, SRC_DISP10, 28, 1),
+ MUX(0, "mout_mipi1", mout_group2_p, SRC_DISP10, 16, 3),
+ MUX(0, "mout_dp1", mout_group2_p, SRC_DISP10, 20, 3),
+ MUX(0, "mout_pixel", mout_group2_p, SRC_DISP10, 24, 3),
+ MUX(CLK_MOUT_HDMI, "mout_hdmi", mout_hdmi_p, SRC_DISP10, 28, 1),
+ MUX(0, "mout_fimd1_opt", mout_group2_p, SRC_DISP10, 8, 3),
+
+ MUX(0, "mout_fimd1_final", mout_fimd1_final_p, TOP_SPARE2, 8, 1),
/* MAU Block */
- MUX(0, "mout_maudio0", maudio0_p, SRC_MAU, 28, 3),
+ MUX(CLK_MOUT_MAUDIO0, "mout_maudio0", mout_maudio0_p, SRC_MAU, 28, 3),
/* FSYS Block */
- MUX(0, "mout_usbd301", group2_p, SRC_FSYS, 4, 3),
- MUX(0, "mout_mmc0", group2_p, SRC_FSYS, 8, 3),
- MUX(0, "mout_mmc1", group2_p, SRC_FSYS, 12, 3),
- MUX(0, "mout_mmc2", group2_p, SRC_FSYS, 16, 3),
- MUX(0, "mout_usbd300", group2_p, SRC_FSYS, 20, 3),
- MUX(0, "mout_unipro", group2_p, SRC_FSYS, 24, 3),
+ MUX(0, "mout_usbd301", mout_group2_p, SRC_FSYS, 4, 3),
+ MUX(0, "mout_mmc0", mout_group2_p, SRC_FSYS, 8, 3),
+ MUX(0, "mout_mmc1", mout_group2_p, SRC_FSYS, 12, 3),
+ MUX(0, "mout_mmc2", mout_group2_p, SRC_FSYS, 16, 3),
+ MUX(0, "mout_usbd300", mout_group2_p, SRC_FSYS, 20, 3),
+ MUX(0, "mout_unipro", mout_group2_p, SRC_FSYS, 24, 3),
+ MUX(0, "mout_mphy_refclk", mout_group2_p, SRC_FSYS, 28, 3),
/* PERIC Block */
- MUX(0, "mout_uart0", group2_p, SRC_PERIC0, 4, 3),
- MUX(0, "mout_uart1", group2_p, SRC_PERIC0, 8, 3),
- MUX(0, "mout_uart2", group2_p, SRC_PERIC0, 12, 3),
- MUX(0, "mout_uart3", group2_p, SRC_PERIC0, 16, 3),
- MUX(0, "mout_pwm", group2_p, SRC_PERIC0, 24, 3),
- MUX(0, "mout_spdif", spdif_p, SRC_PERIC0, 28, 3),
- MUX(0, "mout_audio0", audio0_p, SRC_PERIC1, 8, 3),
- MUX(0, "mout_audio1", audio1_p, SRC_PERIC1, 12, 3),
- MUX(0, "mout_audio2", audio2_p, SRC_PERIC1, 16, 3),
- MUX(0, "mout_spi0", group2_p, SRC_PERIC1, 20, 3),
- MUX(0, "mout_spi1", group2_p, SRC_PERIC1, 24, 3),
- MUX(0, "mout_spi2", group2_p, SRC_PERIC1, 28, 3),
+ MUX(0, "mout_uart0", mout_group2_p, SRC_PERIC0, 4, 3),
+ MUX(0, "mout_uart1", mout_group2_p, SRC_PERIC0, 8, 3),
+ MUX(0, "mout_uart2", mout_group2_p, SRC_PERIC0, 12, 3),
+ MUX(0, "mout_uart3", mout_group2_p, SRC_PERIC0, 16, 3),
+ MUX(0, "mout_pwm", mout_group2_p, SRC_PERIC0, 24, 3),
+ MUX(0, "mout_spdif", mout_spdif_p, SRC_PERIC0, 28, 3),
+ MUX(0, "mout_audio0", mout_audio0_p, SRC_PERIC1, 8, 3),
+ MUX(0, "mout_audio1", mout_audio1_p, SRC_PERIC1, 12, 3),
+ MUX(0, "mout_audio2", mout_audio2_p, SRC_PERIC1, 16, 3),
+ MUX(0, "mout_spi0", mout_group2_p, SRC_PERIC1, 20, 3),
+ MUX(0, "mout_spi1", mout_group2_p, SRC_PERIC1, 24, 3),
+ MUX(0, "mout_spi2", mout_group2_p, SRC_PERIC1, 28, 3),
+
+ /* ISP Block */
+ MUX(0, "mout_pwm_isp", mout_group2_p, SRC_ISP, 24, 3),
+ MUX(0, "mout_uart_isp", mout_group2_p, SRC_ISP, 20, 3),
+ MUX(0, "mout_spi0_isp", mout_group2_p, SRC_ISP, 12, 3),
+ MUX(0, "mout_spi1_isp", mout_group2_p, SRC_ISP, 16, 3),
+ MUX(0, "mout_isp_sensor", mout_group2_p, SRC_ISP, 28, 3),
};
-static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
+static struct samsung_div_clock exynos5x_div_clks[] __initdata = {
DIV(0, "div_arm", "mout_cpu", DIV_CPU0, 0, 3),
DIV(0, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3),
DIV(0, "armclk2", "div_arm", DIV_CPU0, 28, 3),
- DIV(0, "div_kfc", "mout_cpu_kfc", DIV_KFC0, 0, 3),
+ DIV(0, "div_kfc", "mout_kfc", DIV_KFC0, 0, 3),
DIV(0, "sclk_kpll", "mout_kpll", DIV_KFC0, 24, 3),
+ DIV(0, "dout_aclk400_isp", "mout_aclk400_isp", DIV_TOP0, 0, 3),
DIV(0, "dout_aclk400_mscl", "mout_aclk400_mscl", DIV_TOP0, 4, 3),
DIV(0, "dout_aclk200", "mout_aclk200", DIV_TOP0, 8, 3),
DIV(0, "dout_aclk200_fsys2", "mout_aclk200_fsys2", DIV_TOP0, 12, 3),
+ DIV(0, "dout_aclk100_noc", "mout_aclk100_noc", DIV_TOP0, 20, 3),
DIV(0, "dout_pclk200_fsys", "mout_pclk200_fsys", DIV_TOP0, 24, 3),
DIV(0, "dout_aclk200_fsys", "mout_aclk200_fsys", DIV_TOP0, 28, 3),
DIV(0, "dout_aclk333_432_gscl", "mout_aclk333_432_gscl",
DIV_TOP1, 0, 3),
+ DIV(0, "dout_aclk333_432_isp", "mout_aclk333_432_isp",
+ DIV_TOP1, 4, 3),
DIV(0, "dout_aclk66", "mout_aclk66", DIV_TOP1, 8, 6),
+ DIV(0, "dout_aclk333_432_isp0", "mout_aclk333_432_isp0",
+ DIV_TOP1, 16, 3),
DIV(0, "dout_aclk266", "mout_aclk266", DIV_TOP1, 20, 3),
DIV(0, "dout_aclk166", "mout_aclk166", DIV_TOP1, 24, 3),
DIV(0, "dout_aclk333", "mout_aclk333", DIV_TOP1, 28, 3),
DIV(0, "dout_aclk266_g2d", "mout_aclk266_g2d", DIV_TOP2, 12, 3),
DIV(0, "dout_aclk_g3d", "mout_aclk_g3d", DIV_TOP2, 16, 3),
DIV(0, "dout_aclk300_jpeg", "mout_aclk300_jpeg", DIV_TOP2, 20, 3),
- DIV_A(0, "dout_aclk300_disp1", "mout_aclk300_disp1",
- DIV_TOP2, 24, 3, "aclk300_disp1"),
+ DIV(0, "dout_aclk300_disp1", "mout_aclk300_disp1", DIV_TOP2, 24, 3),
DIV(0, "dout_aclk300_gscl", "mout_aclk300_gscl", DIV_TOP2, 28, 3),
/* DISP1 Block */
- DIV(0, "dout_fimd1", "mout_fimd1", DIV_DISP10, 0, 4),
+ DIV(0, "dout_fimd1", "mout_fimd1_final", DIV_DISP10, 0, 4),
DIV(0, "dout_mipi1", "mout_mipi1", DIV_DISP10, 16, 8),
DIV(0, "dout_dp1", "mout_dp1", DIV_DISP10, 24, 4),
DIV(CLK_DOUT_PIXEL, "dout_hdmi_pixel", "mout_pixel", DIV_DISP10, 28, 4),
+ DIV(0, "dout_disp1_blk", "aclk200_disp1", DIV2_RATIO0, 16, 2),
+ DIV(0, "dout_aclk400_disp1", "mout_aclk400_disp1", DIV_TOP2, 4, 3),
/* Audio Block */
DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4),
DIV(0, "dout_mmc2", "mout_mmc2", DIV_FSYS1, 20, 10),
DIV(0, "dout_unipro", "mout_unipro", DIV_FSYS2, 24, 8),
+ DIV(0, "dout_mphy_refclk", "mout_mphy_refclk", DIV_FSYS2, 16, 8),
/* UART and PWM */
DIV(0, "dout_uart0", "mout_uart0", DIV_PERIC0, 8, 4),
DIV(0, "dout_spi1", "mout_spi1", DIV_PERIC1, 24, 4),
DIV(0, "dout_spi2", "mout_spi2", DIV_PERIC1, 28, 4),
+ /* Mfc Block */
+ DIV(0, "dout_mfc_blk", "mout_user_aclk333", DIV4_RATIO, 0, 2),
+
/* PCM */
DIV(0, "dout_pcm1", "dout_audio1", DIV_PERIC2, 16, 8),
DIV(0, "dout_pcm2", "dout_audio2", DIV_PERIC2, 24, 8),
DIV(0, "dout_audio2", "mout_audio2", DIV_PERIC3, 28, 4),
/* SPI Pre-Ratio */
- DIV(0, "dout_pre_spi0", "dout_spi0", DIV_PERIC4, 8, 8),
- DIV(0, "dout_pre_spi1", "dout_spi1", DIV_PERIC4, 16, 8),
- DIV(0, "dout_pre_spi2", "dout_spi2", DIV_PERIC4, 24, 8),
+ DIV(0, "dout_spi0_pre", "dout_spi0", DIV_PERIC4, 8, 8),
+ DIV(0, "dout_spi1_pre", "dout_spi1", DIV_PERIC4, 16, 8),
+ DIV(0, "dout_spi2_pre", "dout_spi2", DIV_PERIC4, 24, 8),
+
+ /* GSCL Block */
+ DIV(0, "dout_gscl_blk_300", "mout_user_aclk300_gscl",
+ DIV2_RATIO0, 4, 2),
+ DIV(0, "dout_gscl_blk_333", "aclk333_432_gscl", DIV2_RATIO0, 6, 2),
+
+ /* MSCL Block */
+ DIV(0, "dout_mscl_blk", "aclk400_mscl", DIV2_RATIO0, 28, 2),
+
+ /* PSGEN */
+ DIV(0, "dout_gen_blk", "mout_user_aclk266", DIV2_RATIO0, 8, 1),
+ DIV(0, "dout_jpg_blk", "aclk166", DIV2_RATIO0, 20, 1),
+
+ /* ISP Block */
+ DIV(0, "dout_isp_sensor0", "mout_isp_sensor", SCLK_DIV_ISP0, 8, 8),
+ DIV(0, "dout_isp_sensor1", "mout_isp_sensor", SCLK_DIV_ISP0, 16, 8),
+ DIV(0, "dout_isp_sensor2", "mout_isp_sensor", SCLK_DIV_ISP0, 24, 8),
+ DIV(0, "dout_pwm_isp", "mout_pwm_isp", SCLK_DIV_ISP1, 28, 4),
+ DIV(0, "dout_uart_isp", "mout_uart_isp", SCLK_DIV_ISP1, 24, 4),
+ DIV(0, "dout_spi0_isp", "mout_spi0_isp", SCLK_DIV_ISP1, 16, 4),
+ DIV(0, "dout_spi1_isp", "mout_spi1_isp", SCLK_DIV_ISP1, 20, 4),
+ DIV_F(0, "dout_spi0_isp_pre", "dout_spi0_isp", SCLK_DIV_ISP1, 0, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV_F(0, "dout_spi1_isp_pre", "dout_spi1_isp", SCLK_DIV_ISP1, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
};
-static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
- /* TODO: Re-verify the CG bits for all the gate clocks */
- GATE_A(CLK_MCT, "pclk_st", "aclk66_psgen", GATE_BUS_PERIS1, 2, 0, 0,
- "mct"),
+static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = {
+ /* G2D */
+ GATE(CLK_MDMA0, "mdma0", "aclk266_g2d", GATE_IP_G2D, 1, 0, 0),
+ GATE(CLK_SSS, "sss", "aclk266_g2d", GATE_IP_G2D, 2, 0, 0),
+ GATE(CLK_G2D, "g2d", "aclk333_g2d", GATE_IP_G2D, 3, 0, 0),
+ GATE(CLK_SMMU_MDMA0, "smmu_mdma0", "aclk266_g2d", GATE_IP_G2D, 5, 0, 0),
+ GATE(CLK_SMMU_G2D, "smmu_g2d", "aclk333_g2d", GATE_IP_G2D, 7, 0, 0),
GATE(0, "aclk200_fsys", "mout_user_aclk200_fsys",
GATE_BUS_FSYS0, 9, CLK_IGNORE_UNUSED, 0),
GATE_BUS_TOP, 1, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk300_jpeg", "mout_user_aclk300_jpeg",
GATE_BUS_TOP, 4, CLK_IGNORE_UNUSED, 0),
+ GATE(0, "aclk333_432_isp0", "mout_user_aclk333_432_isp0",
+ GATE_BUS_TOP, 5, 0, 0),
GATE(0, "aclk300_gscl", "mout_user_aclk300_gscl",
GATE_BUS_TOP, 6, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk333_432_gscl", "mout_user_aclk333_432_gscl",
GATE_BUS_TOP, 7, CLK_IGNORE_UNUSED, 0),
- GATE(0, "pclk66_gpio", "mout_sw_aclk66",
+ GATE(0, "aclk333_432_isp", "mout_user_aclk333_432_isp",
+ GATE_BUS_TOP, 8, 0, 0),
+ GATE(CLK_PCLK66_GPIO, "pclk66_gpio", "mout_user_pclk66_gpio",
GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0),
- GATE(0, "aclk66_psgen", "mout_aclk66_psgen",
+ GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen",
GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0),
- GATE(0, "aclk66_peric", "mout_aclk66_peric",
- GATE_BUS_TOP, 11, 0, 0),
+ GATE(CLK_ACLK66_PERIC, "aclk66_peric", "mout_user_aclk66_peric",
+ GATE_BUS_TOP, 11, CLK_IGNORE_UNUSED, 0),
+ GATE(0, "aclk266_isp", "mout_user_aclk266_isp",
+ GATE_BUS_TOP, 13, 0, 0),
GATE(0, "aclk166", "mout_user_aclk166",
GATE_BUS_TOP, 14, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk333", "mout_aclk333",
GATE_BUS_TOP, 15, CLK_IGNORE_UNUSED, 0),
+ GATE(0, "aclk400_isp", "mout_user_aclk400_isp",
+ GATE_BUS_TOP, 16, 0, 0),
+ GATE(0, "aclk400_mscl", "mout_user_aclk400_mscl",
+ GATE_BUS_TOP, 17, 0, 0),
+ GATE(0, "aclk200_disp1", "mout_user_aclk200_disp1",
+ GATE_BUS_TOP, 18, 0, 0),
+ GATE(CLK_SCLK_MPHY_IXTAL24, "sclk_mphy_ixtal24", "mphy_refclk_ixtal24",
+ GATE_BUS_TOP, 28, 0, 0),
+ GATE(CLK_SCLK_HSIC_12M, "sclk_hsic_12m", "ff_hsic_12m",
+ GATE_BUS_TOP, 29, 0, 0),
+
+ GATE(0, "aclk300_disp1", "mout_user_aclk300_disp1",
+ SRC_MASK_TOP2, 24, 0, 0),
+
+ GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk",
+ SRC_MASK_TOP7, 20, 0, 0),
/* sclk */
GATE(CLK_SCLK_UART0, "sclk_uart0", "dout_uart0",
GATE_TOP_SCLK_PERIC, 2, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_UART3, "sclk_uart3", "dout_uart3",
GATE_TOP_SCLK_PERIC, 3, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_SCLK_SPI0, "sclk_spi0", "dout_pre_spi0",
+ GATE(CLK_SCLK_SPI0, "sclk_spi0", "dout_spi0_pre",
GATE_TOP_SCLK_PERIC, 6, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_SCLK_SPI1, "sclk_spi1", "dout_pre_spi1",
+ GATE(CLK_SCLK_SPI1, "sclk_spi1", "dout_spi1_pre",
GATE_TOP_SCLK_PERIC, 7, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_SCLK_SPI2, "sclk_spi2", "dout_pre_spi2",
+ GATE(CLK_SCLK_SPI2, "sclk_spi2", "dout_spi2_pre",
GATE_TOP_SCLK_PERIC, 8, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_SPDIF, "sclk_spdif", "mout_spdif",
GATE_TOP_SCLK_PERIC, 9, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_USBD301, "sclk_usbd301", "dout_usbd301",
GATE_TOP_SCLK_FSYS, 10, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_SCLK_USBD301, "sclk_unipro", "dout_unipro",
- SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
-
- GATE(CLK_SCLK_GSCL_WA, "sclk_gscl_wa", "aclK333_432_gscl",
- GATE_TOP_SCLK_GSCL, 6, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_SCLK_GSCL_WB, "sclk_gscl_wb", "aclk333_432_gscl",
- GATE_TOP_SCLK_GSCL, 7, CLK_SET_RATE_PARENT, 0),
-
/* Display */
GATE(CLK_SCLK_FIMD1, "sclk_fimd1", "dout_fimd1",
- GATE_TOP_SCLK_DISP1, 0, CLK_SET_RATE_PARENT, 0),
+ GATE_TOP_SCLK_DISP1, 0, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_MIPI1, "sclk_mipi1", "dout_mipi1",
- GATE_TOP_SCLK_DISP1, 3, CLK_SET_RATE_PARENT, 0),
+ GATE_TOP_SCLK_DISP1, 3, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_HDMI, "sclk_hdmi", "mout_hdmi",
- GATE_TOP_SCLK_DISP1, 9, CLK_SET_RATE_PARENT, 0),
+ GATE_TOP_SCLK_DISP1, 9, 0, 0),
GATE(CLK_SCLK_PIXEL, "sclk_pixel", "dout_hdmi_pixel",
- GATE_TOP_SCLK_DISP1, 10, CLK_SET_RATE_PARENT, 0),
+ GATE_TOP_SCLK_DISP1, 10, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_DP1, "sclk_dp1", "dout_dp1",
- GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0),
+ GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0),
/* Maudio Block */
GATE(CLK_SCLK_MAUDIO0, "sclk_maudio0", "dout_maudio0",
GATE_TOP_SCLK_MAU, 0, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_MAUPCM0, "sclk_maupcm0", "dout_maupcm0",
GATE_TOP_SCLK_MAU, 1, CLK_SET_RATE_PARENT, 0),
- /* FSYS */
+
+ /* FSYS Block */
GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0),
GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0),
GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0),
GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0),
- GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_BUS_FSYS0, 5, 0, 0),
- GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_BUS_FSYS0, 12, 0, 0),
- GATE(CLK_MMC1, "mmc1", "aclk200_fsys2", GATE_BUS_FSYS0, 13, 0, 0),
- GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_BUS_FSYS0, 14, 0, 0),
+ GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0),
+ GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0),
+ GATE(CLK_MMC1, "mmc1", "aclk200_fsys2", GATE_IP_FSYS, 13, 0, 0),
+ GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0),
GATE(CLK_SROMC, "sromc", "aclk200_fsys2",
- GATE_BUS_FSYS0, 19, CLK_IGNORE_UNUSED, 0),
- GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_BUS_FSYS0, 20, 0, 0),
- GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_BUS_FSYS0, 21, 0, 0),
- GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_BUS_FSYS0, 28, 0, 0),
-
- /* UART */
- GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_BUS_PERIC, 4, 0, 0),
- GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_BUS_PERIC, 5, 0, 0),
- GATE_A(CLK_UART2, "uart2", "aclk66_peric",
- GATE_BUS_PERIC, 6, CLK_IGNORE_UNUSED, 0, "uart2"),
- GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_BUS_PERIC, 7, 0, 0),
- /* I2C */
- GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_BUS_PERIC, 9, 0, 0),
- GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_BUS_PERIC, 10, 0, 0),
- GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_BUS_PERIC, 11, 0, 0),
- GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_BUS_PERIC, 12, 0, 0),
- GATE(CLK_I2C4, "i2c4", "aclk66_peric", GATE_BUS_PERIC, 13, 0, 0),
- GATE(CLK_I2C5, "i2c5", "aclk66_peric", GATE_BUS_PERIC, 14, 0, 0),
- GATE(CLK_I2C6, "i2c6", "aclk66_peric", GATE_BUS_PERIC, 15, 0, 0),
- GATE(CLK_I2C7, "i2c7", "aclk66_peric", GATE_BUS_PERIC, 16, 0, 0),
- GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_BUS_PERIC, 17, 0,
- 0),
- GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_BUS_PERIC, 18, 0, 0),
- /* SPI */
- GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_BUS_PERIC, 19, 0, 0),
- GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_BUS_PERIC, 20, 0, 0),
- GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_BUS_PERIC, 21, 0, 0),
- GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0),
- /* I2S */
- GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_BUS_PERIC, 23, 0, 0),
- GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_BUS_PERIC, 24, 0, 0),
- /* PCM */
- GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_BUS_PERIC, 25, 0, 0),
- GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_BUS_PERIC, 26, 0, 0),
- /* PWM */
- GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_BUS_PERIC, 27, 0, 0),
- /* SPDIF */
- GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_BUS_PERIC, 29, 0, 0),
+ GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0),
+ GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0),
+ GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0),
+ GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro",
+ SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
- GATE(CLK_I2C8, "i2c8", "aclk66_peric", GATE_BUS_PERIC1, 0, 0, 0),
- GATE(CLK_I2C9, "i2c9", "aclk66_peric", GATE_BUS_PERIC1, 1, 0, 0),
- GATE(CLK_I2C10, "i2c10", "aclk66_peric", GATE_BUS_PERIC1, 2, 0, 0),
+ /* PERIC Block */
+ GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_IP_PERIC, 0, 0, 0),
+ GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_IP_PERIC, 1, 0, 0),
+ GATE(CLK_UART2, "uart2", "aclk66_peric", GATE_IP_PERIC, 2, 0, 0),
+ GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_IP_PERIC, 3, 0, 0),
+ GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_IP_PERIC, 6, 0, 0),
+ GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_IP_PERIC, 7, 0, 0),
+ GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_IP_PERIC, 8, 0, 0),
+ GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_IP_PERIC, 9, 0, 0),
+ GATE(CLK_USI0, "usi0", "aclk66_peric", GATE_IP_PERIC, 10, 0, 0),
+ GATE(CLK_USI1, "usi1", "aclk66_peric", GATE_IP_PERIC, 11, 0, 0),
+ GATE(CLK_USI2, "usi2", "aclk66_peric", GATE_IP_PERIC, 12, 0, 0),
+ GATE(CLK_USI3, "usi3", "aclk66_peric", GATE_IP_PERIC, 13, 0, 0),
+ GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_IP_PERIC, 14, 0, 0),
+ GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_IP_PERIC, 15, 0, 0),
+ GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_IP_PERIC, 16, 0, 0),
+ GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_IP_PERIC, 17, 0, 0),
+ GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_IP_PERIC, 18, 0, 0),
+ GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_IP_PERIC, 20, 0, 0),
+ GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_IP_PERIC, 21, 0, 0),
+ GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_IP_PERIC, 22, 0, 0),
+ GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_IP_PERIC, 23, 0, 0),
+ GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_IP_PERIC, 24, 0, 0),
+ GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_IP_PERIC, 26, 0, 0),
+ GATE(CLK_USI4, "usi4", "aclk66_peric", GATE_IP_PERIC, 28, 0, 0),
+ GATE(CLK_USI5, "usi5", "aclk66_peric", GATE_IP_PERIC, 30, 0, 0),
+ GATE(CLK_USI6, "usi6", "aclk66_peric", GATE_IP_PERIC, 31, 0, 0),
+ GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0),
+
+ /* PERIS Block */
GATE(CLK_CHIPID, "chipid", "aclk66_psgen",
- GATE_BUS_PERIS0, 12, CLK_IGNORE_UNUSED, 0),
+ GATE_IP_PERIS, 0, CLK_IGNORE_UNUSED, 0),
GATE(CLK_SYSREG, "sysreg", "aclk66_psgen",
- GATE_BUS_PERIS0, 13, CLK_IGNORE_UNUSED, 0),
- GATE(CLK_TZPC0, "tzpc0", "aclk66_psgen", GATE_BUS_PERIS0, 18, 0, 0),
- GATE(CLK_TZPC1, "tzpc1", "aclk66_psgen", GATE_BUS_PERIS0, 19, 0, 0),
- GATE(CLK_TZPC2, "tzpc2", "aclk66_psgen", GATE_BUS_PERIS0, 20, 0, 0),
- GATE(CLK_TZPC3, "tzpc3", "aclk66_psgen", GATE_BUS_PERIS0, 21, 0, 0),
- GATE(CLK_TZPC4, "tzpc4", "aclk66_psgen", GATE_BUS_PERIS0, 22, 0, 0),
- GATE(CLK_TZPC5, "tzpc5", "aclk66_psgen", GATE_BUS_PERIS0, 23, 0, 0),
- GATE(CLK_TZPC6, "tzpc6", "aclk66_psgen", GATE_BUS_PERIS0, 24, 0, 0),
- GATE(CLK_TZPC7, "tzpc7", "aclk66_psgen", GATE_BUS_PERIS0, 25, 0, 0),
- GATE(CLK_TZPC8, "tzpc8", "aclk66_psgen", GATE_BUS_PERIS0, 26, 0, 0),
- GATE(CLK_TZPC9, "tzpc9", "aclk66_psgen", GATE_BUS_PERIS0, 27, 0, 0),
-
- GATE(CLK_HDMI_CEC, "hdmi_cec", "aclk66_psgen", GATE_BUS_PERIS1, 0, 0,
- 0),
+ GATE_IP_PERIS, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC0, "tzpc0", "aclk66_psgen", GATE_IP_PERIS, 6, 0, 0),
+ GATE(CLK_TZPC1, "tzpc1", "aclk66_psgen", GATE_IP_PERIS, 7, 0, 0),
+ GATE(CLK_TZPC2, "tzpc2", "aclk66_psgen", GATE_IP_PERIS, 8, 0, 0),
+ GATE(CLK_TZPC3, "tzpc3", "aclk66_psgen", GATE_IP_PERIS, 9, 0, 0),
+ GATE(CLK_TZPC4, "tzpc4", "aclk66_psgen", GATE_IP_PERIS, 10, 0, 0),
+ GATE(CLK_TZPC5, "tzpc5", "aclk66_psgen", GATE_IP_PERIS, 11, 0, 0),
+ GATE(CLK_TZPC6, "tzpc6", "aclk66_psgen", GATE_IP_PERIS, 12, 0, 0),
+ GATE(CLK_TZPC7, "tzpc7", "aclk66_psgen", GATE_IP_PERIS, 13, 0, 0),
+ GATE(CLK_TZPC8, "tzpc8", "aclk66_psgen", GATE_IP_PERIS, 14, 0, 0),
+ GATE(CLK_TZPC9, "tzpc9", "aclk66_psgen", GATE_IP_PERIS, 15, 0, 0),
+ GATE(CLK_HDMI_CEC, "hdmi_cec", "aclk66_psgen", GATE_IP_PERIS, 16, 0, 0),
+ GATE(CLK_MCT, "mct", "aclk66_psgen", GATE_IP_PERIS, 18, 0, 0),
+ GATE(CLK_WDT, "wdt", "aclk66_psgen", GATE_IP_PERIS, 19, 0, 0),
+ GATE(CLK_RTC, "rtc", "aclk66_psgen", GATE_IP_PERIS, 20, 0, 0),
+ GATE(CLK_TMU, "tmu", "aclk66_psgen", GATE_IP_PERIS, 21, 0, 0),
+ GATE(CLK_TMU_GPU, "tmu_gpu", "aclk66_psgen", GATE_IP_PERIS, 22, 0, 0),
+
GATE(CLK_SECKEY, "seckey", "aclk66_psgen", GATE_BUS_PERIS1, 1, 0, 0),
- GATE(CLK_WDT, "wdt", "aclk66_psgen", GATE_BUS_PERIS1, 3, 0, 0),
- GATE(CLK_RTC, "rtc", "aclk66_psgen", GATE_BUS_PERIS1, 4, 0, 0),
- GATE(CLK_TMU, "tmu", "aclk66_psgen", GATE_BUS_PERIS1, 5, 0, 0),
- GATE(CLK_TMU_GPU, "tmu_gpu", "aclk66_psgen", GATE_BUS_PERIS1, 6, 0, 0),
+
+ /* GEN Block */
+ GATE(CLK_ROTATOR, "rotator", "mout_user_aclk266", GATE_IP_GEN, 1, 0, 0),
+ GATE(CLK_JPEG, "jpeg", "aclk300_jpeg", GATE_IP_GEN, 2, 0, 0),
+ GATE(CLK_JPEG2, "jpeg2", "aclk300_jpeg", GATE_IP_GEN, 3, 0, 0),
+ GATE(CLK_MDMA1, "mdma1", "mout_user_aclk266", GATE_IP_GEN, 4, 0, 0),
+ GATE(CLK_TOP_RTC, "top_rtc", "aclk66_psgen", GATE_IP_GEN, 5, 0, 0),
+ GATE(CLK_SMMU_ROTATOR, "smmu_rotator", "dout_gen_blk",
+ GATE_IP_GEN, 6, 0, 0),
+ GATE(CLK_SMMU_JPEG, "smmu_jpeg", "dout_jpg_blk", GATE_IP_GEN, 7, 0, 0),
+ GATE(CLK_SMMU_MDMA1, "smmu_mdma1", "dout_gen_blk",
+ GATE_IP_GEN, 9, 0, 0),
+
+ /* GATE_IP_GEN doesn't list gates for smmu_jpeg2 and mc */
+ GATE(CLK_SMMU_JPEG2, "smmu_jpeg2", "dout_jpg_blk",
+ GATE_BUS_GEN, 28, 0, 0),
+ GATE(CLK_MC, "mc", "aclk66_psgen", GATE_BUS_GEN, 12, 0, 0),
+
+ /* GSCL Block */
+ GATE(CLK_SCLK_GSCL_WA, "sclk_gscl_wa", "mout_user_aclk333_432_gscl",
+ GATE_TOP_SCLK_GSCL, 6, 0, 0),
+ GATE(CLK_SCLK_GSCL_WB, "sclk_gscl_wb", "mout_user_aclk333_432_gscl",
+ GATE_TOP_SCLK_GSCL, 7, 0, 0),
GATE(CLK_GSCL0, "gscl0", "aclk300_gscl", GATE_IP_GSCL0, 0, 0, 0),
GATE(CLK_GSCL1, "gscl1", "aclk300_gscl", GATE_IP_GSCL0, 1, 0, 0),
- GATE(CLK_CLK_3AA, "clk_3aa", "aclk300_gscl", GATE_IP_GSCL0, 4, 0, 0),
-
- GATE(CLK_SMMU_3AA, "smmu_3aa", "aclk333_432_gscl", GATE_IP_GSCL1, 2, 0,
- 0),
- GATE(CLK_SMMU_FIMCL0, "smmu_fimcl0", "aclk333_432_gscl",
+ GATE(CLK_FIMC_3AA, "fimc_3aa", "aclk333_432_gscl",
+ GATE_IP_GSCL0, 4, 0, 0),
+ GATE(CLK_FIMC_LITE0, "fimc_lite0", "aclk333_432_gscl",
+ GATE_IP_GSCL0, 5, 0, 0),
+ GATE(CLK_FIMC_LITE1, "fimc_lite1", "aclk333_432_gscl",
+ GATE_IP_GSCL0, 6, 0, 0),
+
+ GATE(CLK_SMMU_3AA, "smmu_3aa", "dout_gscl_blk_333",
+ GATE_IP_GSCL1, 2, 0, 0),
+ GATE(CLK_SMMU_FIMCL0, "smmu_fimcl0", "dout_gscl_blk_333",
GATE_IP_GSCL1, 3, 0, 0),
- GATE(CLK_SMMU_FIMCL1, "smmu_fimcl1", "aclk333_432_gscl",
+ GATE(CLK_SMMU_FIMCL1, "smmu_fimcl1", "dout_gscl_blk_333",
GATE_IP_GSCL1, 4, 0, 0),
- GATE(CLK_SMMU_GSCL0, "smmu_gscl0", "aclk300_gscl", GATE_IP_GSCL1, 6, 0,
- 0),
- GATE(CLK_SMMU_GSCL1, "smmu_gscl1", "aclk300_gscl", GATE_IP_GSCL1, 7, 0,
- 0),
- GATE(CLK_GSCL_WA, "gscl_wa", "aclk300_gscl", GATE_IP_GSCL1, 12, 0, 0),
- GATE(CLK_GSCL_WB, "gscl_wb", "aclk300_gscl", GATE_IP_GSCL1, 13, 0, 0),
- GATE(CLK_SMMU_FIMCL3, "smmu_fimcl3,", "aclk333_432_gscl",
+ GATE(CLK_SMMU_GSCL0, "smmu_gscl0", "dout_gscl_blk_300",
+ GATE_IP_GSCL1, 6, 0, 0),
+ GATE(CLK_SMMU_GSCL1, "smmu_gscl1", "dout_gscl_blk_300",
+ GATE_IP_GSCL1, 7, 0, 0),
+ GATE(CLK_GSCL_WA, "gscl_wa", "sclk_gscl_wa", GATE_IP_GSCL1, 12, 0, 0),
+ GATE(CLK_GSCL_WB, "gscl_wb", "sclk_gscl_wb", GATE_IP_GSCL1, 13, 0, 0),
+ GATE(CLK_SMMU_FIMCL3, "smmu_fimcl3,", "dout_gscl_blk_333",
GATE_IP_GSCL1, 16, 0, 0),
GATE(CLK_FIMC_LITE3, "fimc_lite3", "aclk333_432_gscl",
GATE_IP_GSCL1, 17, 0, 0),
+ /* MSCL Block */
+ GATE(CLK_MSCL0, "mscl0", "aclk400_mscl", GATE_IP_MSCL, 0, 0, 0),
+ GATE(CLK_MSCL1, "mscl1", "aclk400_mscl", GATE_IP_MSCL, 1, 0, 0),
+ GATE(CLK_MSCL2, "mscl2", "aclk400_mscl", GATE_IP_MSCL, 2, 0, 0),
+ GATE(CLK_SMMU_MSCL0, "smmu_mscl0", "dout_mscl_blk",
+ GATE_IP_MSCL, 8, 0, 0),
+ GATE(CLK_SMMU_MSCL1, "smmu_mscl1", "dout_mscl_blk",
+ GATE_IP_MSCL, 9, 0, 0),
+ GATE(CLK_SMMU_MSCL2, "smmu_mscl2", "dout_mscl_blk",
+ GATE_IP_MSCL, 10, 0, 0),
+
GATE(CLK_FIMD1, "fimd1", "aclk300_disp1", GATE_IP_DISP1, 0, 0, 0),
GATE(CLK_DSIM1, "dsim1", "aclk200_disp1", GATE_IP_DISP1, 3, 0, 0),
GATE(CLK_DP1, "dp1", "aclk200_disp1", GATE_IP_DISP1, 4, 0, 0),
- GATE(CLK_MIXER, "mixer", "aclk166", GATE_IP_DISP1, 5, 0, 0),
+ GATE(CLK_MIXER, "mixer", "aclk200_disp1", GATE_IP_DISP1, 5, 0, 0),
GATE(CLK_HDMI, "hdmi", "aclk200_disp1", GATE_IP_DISP1, 6, 0, 0),
- GATE(CLK_SMMU_FIMD1, "smmu_fimd1", "aclk300_disp1", GATE_IP_DISP1, 8, 0,
- 0),
+ GATE(CLK_SMMU_FIMD1M0, "smmu_fimd1m0", "dout_disp1_blk",
+ GATE_IP_DISP1, 7, 0, 0),
+ GATE(CLK_SMMU_FIMD1M1, "smmu_fimd1m1", "dout_disp1_blk",
+ GATE_IP_DISP1, 8, 0, 0),
+ GATE(CLK_SMMU_MIXER, "smmu_mixer", "aclk200_disp1",
+ GATE_IP_DISP1, 9, 0, 0),
+
+ /* ISP */
+ GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "dout_uart_isp",
+ GATE_TOP_SCLK_ISP, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "dout_spi0_isp_pre",
+ GATE_TOP_SCLK_ISP, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "dout_spi1_isp_pre",
+ GATE_TOP_SCLK_ISP, 2, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_PWM_ISP, "sclk_pwm_isp", "dout_pwm_isp",
+ GATE_TOP_SCLK_ISP, 3, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_ISP_SENSOR0, "sclk_isp_sensor0", "dout_isp_sensor0",
+ GATE_TOP_SCLK_ISP, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_ISP_SENSOR1, "sclk_isp_sensor1", "dout_isp_sensor1",
+ GATE_TOP_SCLK_ISP, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_ISP_SENSOR2, "sclk_isp_sensor2", "dout_isp_sensor2",
+ GATE_TOP_SCLK_ISP, 12, CLK_SET_RATE_PARENT, 0),
GATE(CLK_MFC, "mfc", "aclk333", GATE_IP_MFC, 0, 0, 0),
- GATE(CLK_SMMU_MFCL, "smmu_mfcl", "aclk333", GATE_IP_MFC, 1, 0, 0),
- GATE(CLK_SMMU_MFCR, "smmu_mfcr", "aclk333", GATE_IP_MFC, 2, 0, 0),
-
- GATE(CLK_G3D, "g3d", "aclkg3d", GATE_IP_G3D, 9, 0, 0),
+ GATE(CLK_SMMU_MFCL, "smmu_mfcl", "dout_mfc_blk", GATE_IP_MFC, 1, 0, 0),
+ GATE(CLK_SMMU_MFCR, "smmu_mfcr", "dout_mfc_blk", GATE_IP_MFC, 2, 0, 0),
- GATE(CLK_ROTATOR, "rotator", "aclk266", GATE_IP_GEN, 1, 0, 0),
- GATE(CLK_JPEG, "jpeg", "aclk300_jpeg", GATE_IP_GEN, 2, 0, 0),
- GATE(CLK_JPEG2, "jpeg2", "aclk300_jpeg", GATE_IP_GEN, 3, 0, 0),
- GATE(CLK_MDMA1, "mdma1", "aclk266", GATE_IP_GEN, 4, 0, 0),
- GATE(CLK_SMMU_ROTATOR, "smmu_rotator", "aclk266", GATE_IP_GEN, 6, 0, 0),
- GATE(CLK_SMMU_JPEG, "smmu_jpeg", "aclk300_jpeg", GATE_IP_GEN, 7, 0, 0),
- GATE(CLK_SMMU_MDMA1, "smmu_mdma1", "aclk266", GATE_IP_GEN, 9, 0, 0),
-
- GATE(CLK_MSCL0, "mscl0", "aclk400_mscl", GATE_IP_MSCL, 0, 0, 0),
- GATE(CLK_MSCL1, "mscl1", "aclk400_mscl", GATE_IP_MSCL, 1, 0, 0),
- GATE(CLK_MSCL2, "mscl2", "aclk400_mscl", GATE_IP_MSCL, 2, 0, 0),
- GATE(CLK_SMMU_MSCL0, "smmu_mscl0", "aclk400_mscl", GATE_IP_MSCL, 8, 0,
- 0),
- GATE(CLK_SMMU_MSCL1, "smmu_mscl1", "aclk400_mscl", GATE_IP_MSCL, 9, 0,
- 0),
- GATE(CLK_SMMU_MSCL2, "smmu_mscl2", "aclk400_mscl", GATE_IP_MSCL, 10, 0,
- 0),
- GATE(CLK_SMMU_MIXER, "smmu_mixer", "aclk200_disp1", GATE_IP_DISP1, 9, 0,
- 0),
+ GATE(CLK_G3D, "g3d", "mout_user_aclk_g3d", GATE_IP_G3D, 9, 0, 0),
};
-static struct samsung_pll_clock exynos5420_plls[nr_plls] __initdata = {
+static struct samsung_pll_clock exynos5x_plls[nr_plls] __initdata = {
[apll] = PLL(pll_2550, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
APLL_CON0, NULL),
[cpll] = PLL(pll_2550, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK,
};
/* register exynos5420 clocks */
-static void __init exynos5420_clk_init(struct device_node *np)
+static void __init exynos5x_clk_init(struct device_node *np,
+ enum exynos5x_soc soc)
{
+ struct samsung_clk_provider *ctx;
+
if (np) {
reg_base = of_iomap(np, 0);
if (!reg_base)
panic("%s: unable to determine soc\n", __func__);
}
- samsung_clk_init(np, reg_base, CLK_NR_CLKS);
- samsung_clk_of_register_fixed_ext(exynos5420_fixed_rate_ext_clks,
- ARRAY_SIZE(exynos5420_fixed_rate_ext_clks),
+ exynos5x_soc = soc;
+
+ ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
+
+ samsung_clk_of_register_fixed_ext(ctx, exynos5x_fixed_rate_ext_clks,
+ ARRAY_SIZE(exynos5x_fixed_rate_ext_clks),
ext_clk_match);
- samsung_clk_register_pll(exynos5420_plls, ARRAY_SIZE(exynos5420_plls),
+ samsung_clk_register_pll(ctx, exynos5x_plls, ARRAY_SIZE(exynos5x_plls),
reg_base);
- samsung_clk_register_fixed_rate(exynos5420_fixed_rate_clks,
- ARRAY_SIZE(exynos5420_fixed_rate_clks));
- samsung_clk_register_fixed_factor(exynos5420_fixed_factor_clks,
- ARRAY_SIZE(exynos5420_fixed_factor_clks));
- samsung_clk_register_mux(exynos5420_mux_clks,
- ARRAY_SIZE(exynos5420_mux_clks));
- samsung_clk_register_div(exynos5420_div_clks,
- ARRAY_SIZE(exynos5420_div_clks));
- samsung_clk_register_gate(exynos5420_gate_clks,
- ARRAY_SIZE(exynos5420_gate_clks));
+ samsung_clk_register_fixed_rate(ctx, exynos5x_fixed_rate_clks,
+ ARRAY_SIZE(exynos5x_fixed_rate_clks));
+ samsung_clk_register_fixed_factor(ctx, exynos5x_fixed_factor_clks,
+ ARRAY_SIZE(exynos5x_fixed_factor_clks));
+ samsung_clk_register_mux(ctx, exynos5x_mux_clks,
+ ARRAY_SIZE(exynos5x_mux_clks));
+ samsung_clk_register_div(ctx, exynos5x_div_clks,
+ ARRAY_SIZE(exynos5x_div_clks));
+ samsung_clk_register_gate(ctx, exynos5x_gate_clks,
+ ARRAY_SIZE(exynos5x_gate_clks));
+
+ if (soc == EXYNOS5420) {
+ samsung_clk_register_mux(ctx, exynos5420_mux_clks,
+ ARRAY_SIZE(exynos5420_mux_clks));
+ samsung_clk_register_div(ctx, exynos5420_div_clks,
+ ARRAY_SIZE(exynos5420_div_clks));
+ } else {
+ samsung_clk_register_fixed_factor(
+ ctx, exynos5800_fixed_factor_clks,
+ ARRAY_SIZE(exynos5800_fixed_factor_clks));
+ samsung_clk_register_mux(ctx, exynos5800_mux_clks,
+ ARRAY_SIZE(exynos5800_mux_clks));
+ samsung_clk_register_div(ctx, exynos5800_div_clks,
+ ARRAY_SIZE(exynos5800_div_clks));
+ samsung_clk_register_gate(ctx, exynos5800_gate_clks,
+ ARRAY_SIZE(exynos5800_gate_clks));
+ }
exynos5420_clk_sleep_init();
}
+
+static void __init exynos5420_clk_init(struct device_node *np)
+{
+ exynos5x_clk_init(np, EXYNOS5420);
+}
CLK_OF_DECLARE(exynos5420_clk, "samsung,exynos5420-clock", exynos5420_clk_init);
+
+static void __init exynos5800_clk_init(struct device_node *np)
+{
+ exynos5x_clk_init(np, EXYNOS5800);
+}
+CLK_OF_DECLARE(exynos5800_clk, "samsung,exynos5800-clock", exynos5800_clk_init);
static void __init exynos5440_clk_init(struct device_node *np)
{
void __iomem *reg_base;
+ struct samsung_clk_provider *ctx;
reg_base = of_iomap(np, 0);
if (!reg_base) {
return;
}
- samsung_clk_init(np, reg_base, CLK_NR_CLKS);
- samsung_clk_of_register_fixed_ext(exynos5440_fixed_rate_ext_clks,
+ ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
+
+ samsung_clk_of_register_fixed_ext(ctx, exynos5440_fixed_rate_ext_clks,
ARRAY_SIZE(exynos5440_fixed_rate_ext_clks), ext_clk_match);
samsung_clk_register_pll2550x("cplla", "xtal", reg_base + 0x1c, 0x10);
samsung_clk_register_pll2550x("cpllb", "xtal", reg_base + 0x20, 0x10);
- samsung_clk_register_fixed_rate(exynos5440_fixed_rate_clks,
+ samsung_clk_register_fixed_rate(ctx, exynos5440_fixed_rate_clks,
ARRAY_SIZE(exynos5440_fixed_rate_clks));
- samsung_clk_register_fixed_factor(exynos5440_fixed_factor_clks,
+ samsung_clk_register_fixed_factor(ctx, exynos5440_fixed_factor_clks,
ARRAY_SIZE(exynos5440_fixed_factor_clks));
- samsung_clk_register_mux(exynos5440_mux_clks,
+ samsung_clk_register_mux(ctx, exynos5440_mux_clks,
ARRAY_SIZE(exynos5440_mux_clks));
- samsung_clk_register_div(exynos5440_div_clks,
+ samsung_clk_register_div(ctx, exynos5440_div_clks,
ARRAY_SIZE(exynos5440_div_clks));
- samsung_clk_register_gate(exynos5440_gate_clks,
+ samsung_clk_register_gate(ctx, exynos5440_gate_clks,
ARRAY_SIZE(exynos5440_gate_clks));
pr_info("Exynos5440: arm_clk = %ldHz\n", _get_rate("arm_clk"));
#include <linux/errno.h>
#include <linux/hrtimer.h>
+#include <linux/delay.h>
#include "clk.h"
#include "clk-pll.h"
return rate_table[i - 1].rate;
}
+/*
+ * PLL2126 Clock Type
+ */
+
+#define PLL2126_MDIV_MASK (0xff)
+#define PLL2126_PDIV_MASK (0x3f)
+#define PLL2126_SDIV_MASK (0x3)
+#define PLL2126_MDIV_SHIFT (16)
+#define PLL2126_PDIV_SHIFT (8)
+#define PLL2126_SDIV_SHIFT (0)
+
+static unsigned long samsung_pll2126_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 pll_con, mdiv, pdiv, sdiv;
+ u64 fvco = parent_rate;
+
+ pll_con = __raw_readl(pll->con_reg);
+ mdiv = (pll_con >> PLL2126_MDIV_SHIFT) & PLL2126_MDIV_MASK;
+ pdiv = (pll_con >> PLL2126_PDIV_SHIFT) & PLL2126_PDIV_MASK;
+ sdiv = (pll_con >> PLL2126_SDIV_SHIFT) & PLL2126_SDIV_MASK;
+
+ fvco *= (mdiv + 8);
+ do_div(fvco, (pdiv + 2) << sdiv);
+
+ return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll2126_clk_ops = {
+ .recalc_rate = samsung_pll2126_recalc_rate,
+};
+
+/*
+ * PLL3000 Clock Type
+ */
+
+#define PLL3000_MDIV_MASK (0xff)
+#define PLL3000_PDIV_MASK (0x3)
+#define PLL3000_SDIV_MASK (0x3)
+#define PLL3000_MDIV_SHIFT (16)
+#define PLL3000_PDIV_SHIFT (8)
+#define PLL3000_SDIV_SHIFT (0)
+
+static unsigned long samsung_pll3000_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 pll_con, mdiv, pdiv, sdiv;
+ u64 fvco = parent_rate;
+
+ pll_con = __raw_readl(pll->con_reg);
+ mdiv = (pll_con >> PLL3000_MDIV_SHIFT) & PLL3000_MDIV_MASK;
+ pdiv = (pll_con >> PLL3000_PDIV_SHIFT) & PLL3000_PDIV_MASK;
+ sdiv = (pll_con >> PLL3000_SDIV_SHIFT) & PLL3000_SDIV_MASK;
+
+ fvco *= (2 * (mdiv + 8));
+ do_div(fvco, pdiv << sdiv);
+
+ return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll3000_clk_ops = {
+ .recalc_rate = samsung_pll3000_recalc_rate,
+};
+
/*
* PLL35xx Clock Type
*/
#define PLL6552_PDIV_MASK 0x3f
#define PLL6552_SDIV_MASK 0x7
#define PLL6552_MDIV_SHIFT 16
+#define PLL6552_MDIV_SHIFT_2416 14
#define PLL6552_PDIV_SHIFT 8
+#define PLL6552_PDIV_SHIFT_2416 5
#define PLL6552_SDIV_SHIFT 0
static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw,
u64 fvco = parent_rate;
pll_con = __raw_readl(pll->con_reg);
- mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK;
- pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK;
+ if (pll->type == pll_6552_s3c2416) {
+ mdiv = (pll_con >> PLL6552_MDIV_SHIFT_2416) & PLL6552_MDIV_MASK;
+ pdiv = (pll_con >> PLL6552_PDIV_SHIFT_2416) & PLL6552_PDIV_MASK;
+ } else {
+ mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK;
+ pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK;
+ }
sdiv = (pll_con >> PLL6552_SDIV_SHIFT) & PLL6552_SDIV_MASK;
fvco *= mdiv;
.recalc_rate = samsung_pll6553_recalc_rate,
};
+/*
+ * PLL Clock Type of S3C24XX before S3C2443
+ */
+
+#define PLLS3C2410_MDIV_MASK (0xff)
+#define PLLS3C2410_PDIV_MASK (0x1f)
+#define PLLS3C2410_SDIV_MASK (0x3)
+#define PLLS3C2410_MDIV_SHIFT (12)
+#define PLLS3C2410_PDIV_SHIFT (4)
+#define PLLS3C2410_SDIV_SHIFT (0)
+
+#define PLLS3C2410_ENABLE_REG_OFFSET 0x10
+
+static unsigned long samsung_s3c2410_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 pll_con, mdiv, pdiv, sdiv;
+ u64 fvco = parent_rate;
+
+ pll_con = __raw_readl(pll->con_reg);
+ mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK;
+ pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK;
+ sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK;
+
+ fvco *= (mdiv + 8);
+ do_div(fvco, (pdiv + 2) << sdiv);
+
+ return (unsigned int)fvco;
+}
+
+static unsigned long samsung_s3c2440_mpll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 pll_con, mdiv, pdiv, sdiv;
+ u64 fvco = parent_rate;
+
+ pll_con = __raw_readl(pll->con_reg);
+ mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK;
+ pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK;
+ sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK;
+
+ fvco *= (2 * (mdiv + 8));
+ do_div(fvco, (pdiv + 2) << sdiv);
+
+ return (unsigned int)fvco;
+}
+
+static int samsung_s3c2410_pll_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ const struct samsung_pll_rate_table *rate;
+ u32 tmp;
+
+ /* Get required rate settings from table */
+ rate = samsung_get_pll_settings(pll, drate);
+ if (!rate) {
+ pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+ drate, __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ tmp = __raw_readl(pll->con_reg);
+
+ /* Change PLL PMS values */
+ tmp &= ~((PLLS3C2410_MDIV_MASK << PLLS3C2410_MDIV_SHIFT) |
+ (PLLS3C2410_PDIV_MASK << PLLS3C2410_PDIV_SHIFT) |
+ (PLLS3C2410_SDIV_MASK << PLLS3C2410_SDIV_SHIFT));
+ tmp |= (rate->mdiv << PLLS3C2410_MDIV_SHIFT) |
+ (rate->pdiv << PLLS3C2410_PDIV_SHIFT) |
+ (rate->sdiv << PLLS3C2410_SDIV_SHIFT);
+ __raw_writel(tmp, pll->con_reg);
+
+ /* Time to settle according to the manual */
+ udelay(300);
+
+ return 0;
+}
+
+static int samsung_s3c2410_pll_enable(struct clk_hw *hw, int bit, bool enable)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 pll_en = __raw_readl(pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET);
+ u32 pll_en_orig = pll_en;
+
+ if (enable)
+ pll_en &= ~BIT(bit);
+ else
+ pll_en |= BIT(bit);
+
+ __raw_writel(pll_en, pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET);
+
+ /* if we started the UPLL, then allow to settle */
+ if (enable && (pll_en_orig & BIT(bit)))
+ udelay(300);
+
+ return 0;
+}
+
+static int samsung_s3c2410_mpll_enable(struct clk_hw *hw)
+{
+ return samsung_s3c2410_pll_enable(hw, 5, true);
+}
+
+static void samsung_s3c2410_mpll_disable(struct clk_hw *hw)
+{
+ samsung_s3c2410_pll_enable(hw, 5, false);
+}
+
+static int samsung_s3c2410_upll_enable(struct clk_hw *hw)
+{
+ return samsung_s3c2410_pll_enable(hw, 7, true);
+}
+
+static void samsung_s3c2410_upll_disable(struct clk_hw *hw)
+{
+ samsung_s3c2410_pll_enable(hw, 7, false);
+}
+
+static const struct clk_ops samsung_s3c2410_mpll_clk_min_ops = {
+ .recalc_rate = samsung_s3c2410_pll_recalc_rate,
+ .enable = samsung_s3c2410_mpll_enable,
+ .disable = samsung_s3c2410_mpll_disable,
+};
+
+static const struct clk_ops samsung_s3c2410_upll_clk_min_ops = {
+ .recalc_rate = samsung_s3c2410_pll_recalc_rate,
+ .enable = samsung_s3c2410_upll_enable,
+ .disable = samsung_s3c2410_upll_disable,
+};
+
+static const struct clk_ops samsung_s3c2440_mpll_clk_min_ops = {
+ .recalc_rate = samsung_s3c2440_mpll_recalc_rate,
+ .enable = samsung_s3c2410_mpll_enable,
+ .disable = samsung_s3c2410_mpll_disable,
+};
+
+static const struct clk_ops samsung_s3c2410_mpll_clk_ops = {
+ .recalc_rate = samsung_s3c2410_pll_recalc_rate,
+ .enable = samsung_s3c2410_mpll_enable,
+ .disable = samsung_s3c2410_mpll_disable,
+ .round_rate = samsung_pll_round_rate,
+ .set_rate = samsung_s3c2410_pll_set_rate,
+};
+
+static const struct clk_ops samsung_s3c2410_upll_clk_ops = {
+ .recalc_rate = samsung_s3c2410_pll_recalc_rate,
+ .enable = samsung_s3c2410_upll_enable,
+ .disable = samsung_s3c2410_upll_disable,
+ .round_rate = samsung_pll_round_rate,
+ .set_rate = samsung_s3c2410_pll_set_rate,
+};
+
+static const struct clk_ops samsung_s3c2440_mpll_clk_ops = {
+ .recalc_rate = samsung_s3c2440_mpll_recalc_rate,
+ .enable = samsung_s3c2410_mpll_enable,
+ .disable = samsung_s3c2410_mpll_disable,
+ .round_rate = samsung_pll_round_rate,
+ .set_rate = samsung_s3c2410_pll_set_rate,
+};
+
/*
* PLL2550x Clock Type
*/
return clk;
}
-static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
- void __iomem *base)
+/*
+ * PLL2550xx Clock Type
+ */
+
+/* Maximum lock time can be 270 * PDIV cycles */
+#define PLL2550XX_LOCK_FACTOR 270
+
+#define PLL2550XX_M_MASK 0x3FF
+#define PLL2550XX_P_MASK 0x3F
+#define PLL2550XX_S_MASK 0x7
+#define PLL2550XX_LOCK_STAT_MASK 0x1
+#define PLL2550XX_M_SHIFT 9
+#define PLL2550XX_P_SHIFT 3
+#define PLL2550XX_S_SHIFT 0
+#define PLL2550XX_LOCK_STAT_SHIFT 21
+
+static unsigned long samsung_pll2550xx_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 mdiv, pdiv, sdiv, pll_con;
+ u64 fvco = parent_rate;
+
+ pll_con = __raw_readl(pll->con_reg);
+ mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK;
+ pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK;
+ sdiv = (pll_con >> PLL2550XX_S_SHIFT) & PLL2550XX_S_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+
+static inline bool samsung_pll2550xx_mp_change(u32 mdiv, u32 pdiv, u32 pll_con)
+{
+ u32 old_mdiv, old_pdiv;
+
+ old_mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK;
+ old_pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK;
+
+ return mdiv != old_mdiv || pdiv != old_pdiv;
+}
+
+static int samsung_pll2550xx_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ const struct samsung_pll_rate_table *rate;
+ u32 tmp;
+
+ /* Get required rate settings from table */
+ rate = samsung_get_pll_settings(pll, drate);
+ if (!rate) {
+ pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+ drate, __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ tmp = __raw_readl(pll->con_reg);
+
+ if (!(samsung_pll2550xx_mp_change(rate->mdiv, rate->pdiv, tmp))) {
+ /* If only s change, change just s value only*/
+ tmp &= ~(PLL2550XX_S_MASK << PLL2550XX_S_SHIFT);
+ tmp |= rate->sdiv << PLL2550XX_S_SHIFT;
+ __raw_writel(tmp, pll->con_reg);
+
+ return 0;
+ }
+
+ /* Set PLL lock time. */
+ __raw_writel(rate->pdiv * PLL2550XX_LOCK_FACTOR, pll->lock_reg);
+
+ /* Change PLL PMS values */
+ tmp &= ~((PLL2550XX_M_MASK << PLL2550XX_M_SHIFT) |
+ (PLL2550XX_P_MASK << PLL2550XX_P_SHIFT) |
+ (PLL2550XX_S_MASK << PLL2550XX_S_SHIFT));
+ tmp |= (rate->mdiv << PLL2550XX_M_SHIFT) |
+ (rate->pdiv << PLL2550XX_P_SHIFT) |
+ (rate->sdiv << PLL2550XX_S_SHIFT);
+ __raw_writel(tmp, pll->con_reg);
+
+ /* wait_lock_time */
+ do {
+ cpu_relax();
+ tmp = __raw_readl(pll->con_reg);
+ } while (!(tmp & (PLL2550XX_LOCK_STAT_MASK
+ << PLL2550XX_LOCK_STAT_SHIFT)));
+
+ return 0;
+}
+
+static const struct clk_ops samsung_pll2550xx_clk_ops = {
+ .recalc_rate = samsung_pll2550xx_recalc_rate,
+ .round_rate = samsung_pll_round_rate,
+ .set_rate = samsung_pll2550xx_set_rate,
+};
+
+static const struct clk_ops samsung_pll2550xx_clk_min_ops = {
+ .recalc_rate = samsung_pll2550xx_recalc_rate,
+};
+
+/*
+ * PLL2650XX Clock Type
+ */
+
+/* Maximum lock time can be 3000 * PDIV cycles */
+#define PLL2650XX_LOCK_FACTOR 3000
+
+#define PLL2650XX_MDIV_SHIFT 9
+#define PLL2650XX_PDIV_SHIFT 3
+#define PLL2650XX_SDIV_SHIFT 0
+#define PLL2650XX_KDIV_SHIFT 0
+#define PLL2650XX_MDIV_MASK 0x1ff
+#define PLL2650XX_PDIV_MASK 0x3f
+#define PLL2650XX_SDIV_MASK 0x7
+#define PLL2650XX_KDIV_MASK 0xffff
+#define PLL2650XX_PLL_ENABLE_SHIFT 23
+#define PLL2650XX_PLL_LOCKTIME_SHIFT 21
+#define PLL2650XX_PLL_FOUTMASK_SHIFT 31
+
+static unsigned long samsung_pll2650xx_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 mdiv, pdiv, sdiv, pll_con0, pll_con2;
+ s16 kdiv;
+ u64 fvco = parent_rate;
+
+ pll_con0 = __raw_readl(pll->con_reg);
+ pll_con2 = __raw_readl(pll->con_reg + 8);
+ mdiv = (pll_con0 >> PLL2650XX_MDIV_SHIFT) & PLL2650XX_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL2650XX_PDIV_SHIFT) & PLL2650XX_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL2650XX_SDIV_SHIFT) & PLL2650XX_SDIV_MASK;
+ kdiv = (s16)(pll_con2 & PLL2650XX_KDIV_MASK);
+
+ fvco *= (mdiv << 16) + kdiv;
+ do_div(fvco, (pdiv << sdiv));
+ fvco >>= 16;
+
+ return (unsigned long)fvco;
+}
+
+static int samsung_pll2650xx_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 tmp, pll_con0, pll_con2;
+ const struct samsung_pll_rate_table *rate;
+
+ rate = samsung_get_pll_settings(pll, drate);
+ if (!rate) {
+ pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+ drate, __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ pll_con0 = __raw_readl(pll->con_reg);
+ pll_con2 = __raw_readl(pll->con_reg + 8);
+
+ /* Change PLL PMS values */
+ pll_con0 &= ~(PLL2650XX_MDIV_MASK << PLL2650XX_MDIV_SHIFT |
+ PLL2650XX_PDIV_MASK << PLL2650XX_PDIV_SHIFT |
+ PLL2650XX_SDIV_MASK << PLL2650XX_SDIV_SHIFT);
+ pll_con0 |= rate->mdiv << PLL2650XX_MDIV_SHIFT;
+ pll_con0 |= rate->pdiv << PLL2650XX_PDIV_SHIFT;
+ pll_con0 |= rate->sdiv << PLL2650XX_SDIV_SHIFT;
+ pll_con0 |= 1 << PLL2650XX_PLL_ENABLE_SHIFT;
+ pll_con0 |= 1 << PLL2650XX_PLL_FOUTMASK_SHIFT;
+
+ pll_con2 &= ~(PLL2650XX_KDIV_MASK << PLL2650XX_KDIV_SHIFT);
+ pll_con2 |= ((~(rate->kdiv) + 1) & PLL2650XX_KDIV_MASK)
+ << PLL2650XX_KDIV_SHIFT;
+
+ /* Set PLL lock time. */
+ __raw_writel(PLL2650XX_LOCK_FACTOR * rate->pdiv, pll->lock_reg);
+
+ __raw_writel(pll_con0, pll->con_reg);
+ __raw_writel(pll_con2, pll->con_reg + 8);
+
+ do {
+ tmp = __raw_readl(pll->con_reg);
+ } while (!(tmp & (0x1 << PLL2650XX_PLL_LOCKTIME_SHIFT)));
+
+ return 0;
+}
+
+static const struct clk_ops samsung_pll2650xx_clk_ops = {
+ .recalc_rate = samsung_pll2650xx_recalc_rate,
+ .set_rate = samsung_pll2650xx_set_rate,
+ .round_rate = samsung_pll_round_rate,
+};
+
+static const struct clk_ops samsung_pll2650xx_clk_min_ops = {
+ .recalc_rate = samsung_pll2650xx_recalc_rate,
+};
+
+static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
+ struct samsung_pll_clock *pll_clk,
+ void __iomem *base)
{
struct samsung_clk_pll *pll;
struct clk *clk;
}
switch (pll_clk->type) {
+ case pll_2126:
+ init.ops = &samsung_pll2126_clk_ops;
+ break;
+ case pll_3000:
+ init.ops = &samsung_pll3000_clk_ops;
+ break;
/* clk_ops for 35xx and 2550 are similar */
case pll_35xx:
case pll_2550:
init.ops = &samsung_pll36xx_clk_ops;
break;
case pll_6552:
+ case pll_6552_s3c2416:
init.ops = &samsung_pll6552_clk_ops;
break;
case pll_6553:
else
init.ops = &samsung_pll46xx_clk_ops;
break;
+ case pll_s3c2410_mpll:
+ if (!pll->rate_table)
+ init.ops = &samsung_s3c2410_mpll_clk_min_ops;
+ else
+ init.ops = &samsung_s3c2410_mpll_clk_ops;
+ break;
+ case pll_s3c2410_upll:
+ if (!pll->rate_table)
+ init.ops = &samsung_s3c2410_upll_clk_min_ops;
+ else
+ init.ops = &samsung_s3c2410_upll_clk_ops;
+ break;
+ case pll_s3c2440_mpll:
+ if (!pll->rate_table)
+ init.ops = &samsung_s3c2440_mpll_clk_min_ops;
+ else
+ init.ops = &samsung_s3c2440_mpll_clk_ops;
+ break;
+ case pll_2550xx:
+ if (!pll->rate_table)
+ init.ops = &samsung_pll2550xx_clk_min_ops;
+ else
+ init.ops = &samsung_pll2550xx_clk_ops;
+ break;
+ case pll_2650xx:
+ if (!pll->rate_table)
+ init.ops = &samsung_pll2650xx_clk_min_ops;
+ else
+ init.ops = &samsung_pll2650xx_clk_ops;
+ break;
default:
pr_warn("%s: Unknown pll type for pll clk %s\n",
__func__, pll_clk->name);
return;
}
- samsung_clk_add_lookup(clk, pll_clk->id);
+ samsung_clk_add_lookup(ctx, clk, pll_clk->id);
if (!pll_clk->alias)
return;
__func__, pll_clk->name, ret);
}
-void __init samsung_clk_register_pll(struct samsung_pll_clock *pll_list,
- unsigned int nr_pll, void __iomem *base)
+void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
+ struct samsung_pll_clock *pll_list,
+ unsigned int nr_pll, void __iomem *base)
{
int cnt;
for (cnt = 0; cnt < nr_pll; cnt++)
- _samsung_clk_register_pll(&pll_list[cnt], base);
+ _samsung_clk_register_pll(ctx, &pll_list[cnt], base);
}
#define __SAMSUNG_CLK_PLL_H
enum samsung_pll_type {
+ pll_2126,
+ pll_3000,
pll_35xx,
pll_36xx,
pll_2550,
pll_4650,
pll_4650c,
pll_6552,
+ pll_6552_s3c2416,
pll_6553,
+ pll_s3c2410_mpll,
+ pll_s3c2410_upll,
+ pll_s3c2440_mpll,
+ pll_2550xx,
+ pll_2650xx,
};
#define PLL_35XX_RATE(_rate, _m, _p, _s) \
--- /dev/null
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for s3c24xx external clock output.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include "clk.h"
+
+/* legacy access to misccr, until dt conversion is finished */
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#define MUX_DCLK0 0
+#define MUX_DCLK1 1
+#define DIV_DCLK0 2
+#define DIV_DCLK1 3
+#define GATE_DCLK0 4
+#define GATE_DCLK1 5
+#define MUX_CLKOUT0 6
+#define MUX_CLKOUT1 7
+#define DCLK_MAX_CLKS (MUX_CLKOUT1 + 1)
+
+enum supported_socs {
+ S3C2410,
+ S3C2412,
+ S3C2440,
+ S3C2443,
+};
+
+struct s3c24xx_dclk_drv_data {
+ const char **clkout0_parent_names;
+ int clkout0_num_parents;
+ const char **clkout1_parent_names;
+ int clkout1_num_parents;
+ const char **mux_parent_names;
+ int mux_num_parents;
+};
+
+/*
+ * Clock for output-parent selection in misccr
+ */
+
+struct s3c24xx_clkout {
+ struct clk_hw hw;
+ u32 mask;
+ u8 shift;
+};
+
+#define to_s3c24xx_clkout(_hw) container_of(_hw, struct s3c24xx_clkout, hw)
+
+static u8 s3c24xx_clkout_get_parent(struct clk_hw *hw)
+{
+ struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw);
+ int num_parents = __clk_get_num_parents(hw->clk);
+ u32 val;
+
+ val = readl_relaxed(S3C24XX_MISCCR) >> clkout->shift;
+ val >>= clkout->shift;
+ val &= clkout->mask;
+
+ if (val >= num_parents)
+ return -EINVAL;
+
+ return val;
+}
+
+static int s3c24xx_clkout_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw);
+ int ret = 0;
+
+ s3c2410_modify_misccr((clkout->mask << clkout->shift),
+ (index << clkout->shift));
+
+ return ret;
+}
+
+const struct clk_ops s3c24xx_clkout_ops = {
+ .get_parent = s3c24xx_clkout_get_parent,
+ .set_parent = s3c24xx_clkout_set_parent,
+ .determine_rate = __clk_mux_determine_rate,
+};
+
+struct clk *s3c24xx_register_clkout(struct device *dev, const char *name,
+ const char **parent_names, u8 num_parents,
+ u8 shift, u32 mask)
+{
+ struct s3c24xx_clkout *clkout;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ /* allocate the clkout */
+ clkout = kzalloc(sizeof(*clkout), GFP_KERNEL);
+ if (!clkout)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &s3c24xx_clkout_ops;
+ init.flags = CLK_IS_BASIC;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
+ clkout->shift = shift;
+ clkout->mask = mask;
+ clkout->hw.init = &init;
+
+ clk = clk_register(dev, &clkout->hw);
+
+ return clk;
+}
+
+/*
+ * dclk and clkout init
+ */
+
+struct s3c24xx_dclk {
+ struct device *dev;
+ void __iomem *base;
+ struct clk_onecell_data clk_data;
+ struct notifier_block dclk0_div_change_nb;
+ struct notifier_block dclk1_div_change_nb;
+ spinlock_t dclk_lock;
+ unsigned long reg_save;
+};
+
+#define to_s3c24xx_dclk0(x) \
+ container_of(x, struct s3c24xx_dclk, dclk0_div_change_nb)
+
+#define to_s3c24xx_dclk1(x) \
+ container_of(x, struct s3c24xx_dclk, dclk1_div_change_nb)
+
+PNAME(dclk_s3c2410_p) = { "pclk", "uclk" };
+PNAME(clkout0_s3c2410_p) = { "mpll", "upll", "fclk", "hclk", "pclk",
+ "gate_dclk0" };
+PNAME(clkout1_s3c2410_p) = { "mpll", "upll", "fclk", "hclk", "pclk",
+ "gate_dclk1" };
+
+PNAME(clkout0_s3c2412_p) = { "mpll", "upll", "rtc_clkout",
+ "hclk", "pclk", "gate_dclk0" };
+PNAME(clkout1_s3c2412_p) = { "xti", "upll", "fclk", "hclk", "pclk",
+ "gate_dclk1" };
+
+PNAME(clkout0_s3c2440_p) = { "xti", "upll", "fclk", "hclk", "pclk",
+ "gate_dclk0" };
+PNAME(clkout1_s3c2440_p) = { "mpll", "upll", "rtc_clkout",
+ "hclk", "pclk", "gate_dclk1" };
+
+PNAME(dclk_s3c2443_p) = { "pclk", "epll" };
+PNAME(clkout0_s3c2443_p) = { "xti", "epll", "armclk", "hclk", "pclk",
+ "gate_dclk0" };
+PNAME(clkout1_s3c2443_p) = { "dummy", "epll", "rtc_clkout",
+ "hclk", "pclk", "gate_dclk1" };
+
+#define DCLKCON_DCLK_DIV_MASK 0xf
+#define DCLKCON_DCLK0_DIV_SHIFT 4
+#define DCLKCON_DCLK0_CMP_SHIFT 8
+#define DCLKCON_DCLK1_DIV_SHIFT 20
+#define DCLKCON_DCLK1_CMP_SHIFT 24
+
+static void s3c24xx_dclk_update_cmp(struct s3c24xx_dclk *s3c24xx_dclk,
+ int div_shift, int cmp_shift)
+{
+ unsigned long flags = 0;
+ u32 dclk_con, div, cmp;
+
+ spin_lock_irqsave(&s3c24xx_dclk->dclk_lock, flags);
+
+ dclk_con = readl_relaxed(s3c24xx_dclk->base);
+
+ div = ((dclk_con >> div_shift) & DCLKCON_DCLK_DIV_MASK) + 1;
+ cmp = ((div + 1) / 2) - 1;
+
+ dclk_con &= ~(DCLKCON_DCLK_DIV_MASK << cmp_shift);
+ dclk_con |= (cmp << cmp_shift);
+
+ writel_relaxed(dclk_con, s3c24xx_dclk->base);
+
+ spin_unlock_irqrestore(&s3c24xx_dclk->dclk_lock, flags);
+}
+
+static int s3c24xx_dclk0_div_notify(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct s3c24xx_dclk *s3c24xx_dclk = to_s3c24xx_dclk0(nb);
+
+ if (event == POST_RATE_CHANGE) {
+ s3c24xx_dclk_update_cmp(s3c24xx_dclk,
+ DCLKCON_DCLK0_DIV_SHIFT, DCLKCON_DCLK0_CMP_SHIFT);
+ }
+
+ return NOTIFY_DONE;
+}
+
+static int s3c24xx_dclk1_div_notify(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct s3c24xx_dclk *s3c24xx_dclk = to_s3c24xx_dclk1(nb);
+
+ if (event == POST_RATE_CHANGE) {
+ s3c24xx_dclk_update_cmp(s3c24xx_dclk,
+ DCLKCON_DCLK1_DIV_SHIFT, DCLKCON_DCLK1_CMP_SHIFT);
+ }
+
+ return NOTIFY_DONE;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int s3c24xx_dclk_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev);
+
+ s3c24xx_dclk->reg_save = readl_relaxed(s3c24xx_dclk->base);
+ return 0;
+}
+
+static int s3c24xx_dclk_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev);
+
+ writel_relaxed(s3c24xx_dclk->reg_save, s3c24xx_dclk->base);
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(s3c24xx_dclk_pm_ops,
+ s3c24xx_dclk_suspend, s3c24xx_dclk_resume);
+
+static int s3c24xx_dclk_probe(struct platform_device *pdev)
+{
+ struct s3c24xx_dclk *s3c24xx_dclk;
+ struct resource *mem;
+ struct clk **clk_table;
+ struct s3c24xx_dclk_drv_data *dclk_variant;
+ int ret, i;
+
+ s3c24xx_dclk = devm_kzalloc(&pdev->dev, sizeof(*s3c24xx_dclk),
+ GFP_KERNEL);
+ if (!s3c24xx_dclk)
+ return -ENOMEM;
+
+ s3c24xx_dclk->dev = &pdev->dev;
+ platform_set_drvdata(pdev, s3c24xx_dclk);
+ spin_lock_init(&s3c24xx_dclk->dclk_lock);
+
+ clk_table = devm_kzalloc(&pdev->dev,
+ sizeof(struct clk *) * DCLK_MAX_CLKS,
+ GFP_KERNEL);
+ if (!clk_table)
+ return -ENOMEM;
+
+ s3c24xx_dclk->clk_data.clks = clk_table;
+ s3c24xx_dclk->clk_data.clk_num = DCLK_MAX_CLKS;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ s3c24xx_dclk->base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(s3c24xx_dclk->base))
+ return PTR_ERR(s3c24xx_dclk->base);
+
+ dclk_variant = (struct s3c24xx_dclk_drv_data *)
+ platform_get_device_id(pdev)->driver_data;
+
+
+ clk_table[MUX_DCLK0] = clk_register_mux(&pdev->dev, "mux_dclk0",
+ dclk_variant->mux_parent_names,
+ dclk_variant->mux_num_parents, 0,
+ s3c24xx_dclk->base, 1, 1, 0,
+ &s3c24xx_dclk->dclk_lock);
+ clk_table[MUX_DCLK1] = clk_register_mux(&pdev->dev, "mux_dclk1",
+ dclk_variant->mux_parent_names,
+ dclk_variant->mux_num_parents, 0,
+ s3c24xx_dclk->base, 17, 1, 0,
+ &s3c24xx_dclk->dclk_lock);
+
+ clk_table[DIV_DCLK0] = clk_register_divider(&pdev->dev, "div_dclk0",
+ "mux_dclk0", 0, s3c24xx_dclk->base,
+ 4, 4, 0, &s3c24xx_dclk->dclk_lock);
+ clk_table[DIV_DCLK1] = clk_register_divider(&pdev->dev, "div_dclk1",
+ "mux_dclk1", 0, s3c24xx_dclk->base,
+ 20, 4, 0, &s3c24xx_dclk->dclk_lock);
+
+ clk_table[GATE_DCLK0] = clk_register_gate(&pdev->dev, "gate_dclk0",
+ "div_dclk0", CLK_SET_RATE_PARENT,
+ s3c24xx_dclk->base, 0, 0,
+ &s3c24xx_dclk->dclk_lock);
+ clk_table[GATE_DCLK1] = clk_register_gate(&pdev->dev, "gate_dclk1",
+ "div_dclk1", CLK_SET_RATE_PARENT,
+ s3c24xx_dclk->base, 16, 0,
+ &s3c24xx_dclk->dclk_lock);
+
+ clk_table[MUX_CLKOUT0] = s3c24xx_register_clkout(&pdev->dev,
+ "clkout0", dclk_variant->clkout0_parent_names,
+ dclk_variant->clkout0_num_parents, 4, 7);
+ clk_table[MUX_CLKOUT1] = s3c24xx_register_clkout(&pdev->dev,
+ "clkout1", dclk_variant->clkout1_parent_names,
+ dclk_variant->clkout1_num_parents, 8, 7);
+
+ for (i = 0; i < DCLK_MAX_CLKS; i++)
+ if (IS_ERR(clk_table[i])) {
+ dev_err(&pdev->dev, "clock %d failed to register\n", i);
+ ret = PTR_ERR(clk_table[i]);
+ goto err_clk_register;
+ }
+
+ ret = clk_register_clkdev(clk_table[MUX_DCLK0], "dclk0", NULL);
+ if (!ret)
+ ret = clk_register_clkdev(clk_table[MUX_DCLK1], "dclk1", NULL);
+ if (!ret)
+ ret = clk_register_clkdev(clk_table[MUX_CLKOUT0],
+ "clkout0", NULL);
+ if (!ret)
+ ret = clk_register_clkdev(clk_table[MUX_CLKOUT1],
+ "clkout1", NULL);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register aliases, %d\n", ret);
+ goto err_clk_register;
+ }
+
+ s3c24xx_dclk->dclk0_div_change_nb.notifier_call =
+ s3c24xx_dclk0_div_notify;
+
+ s3c24xx_dclk->dclk1_div_change_nb.notifier_call =
+ s3c24xx_dclk1_div_notify;
+
+ ret = clk_notifier_register(clk_table[DIV_DCLK0],
+ &s3c24xx_dclk->dclk0_div_change_nb);
+ if (ret)
+ goto err_clk_register;
+
+ ret = clk_notifier_register(clk_table[DIV_DCLK1],
+ &s3c24xx_dclk->dclk1_div_change_nb);
+ if (ret)
+ goto err_dclk_notify;
+
+ return 0;
+
+err_dclk_notify:
+ clk_notifier_unregister(clk_table[DIV_DCLK0],
+ &s3c24xx_dclk->dclk0_div_change_nb);
+err_clk_register:
+ for (i = 0; i < DCLK_MAX_CLKS; i++)
+ if (clk_table[i] && !IS_ERR(clk_table[i]))
+ clk_unregister(clk_table[i]);
+
+ return ret;
+}
+
+static int s3c24xx_dclk_remove(struct platform_device *pdev)
+{
+ struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev);
+ struct clk **clk_table = s3c24xx_dclk->clk_data.clks;
+ int i;
+
+ clk_notifier_unregister(clk_table[DIV_DCLK1],
+ &s3c24xx_dclk->dclk1_div_change_nb);
+ clk_notifier_unregister(clk_table[DIV_DCLK0],
+ &s3c24xx_dclk->dclk0_div_change_nb);
+
+ for (i = 0; i < DCLK_MAX_CLKS; i++)
+ clk_unregister(clk_table[i]);
+
+ return 0;
+}
+
+static struct s3c24xx_dclk_drv_data dclk_variants[] = {
+ [S3C2410] = {
+ .clkout0_parent_names = clkout0_s3c2410_p,
+ .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2410_p),
+ .clkout1_parent_names = clkout1_s3c2410_p,
+ .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2410_p),
+ .mux_parent_names = dclk_s3c2410_p,
+ .mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p),
+ },
+ [S3C2412] = {
+ .clkout0_parent_names = clkout0_s3c2412_p,
+ .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2412_p),
+ .clkout1_parent_names = clkout1_s3c2412_p,
+ .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2412_p),
+ .mux_parent_names = dclk_s3c2410_p,
+ .mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p),
+ },
+ [S3C2440] = {
+ .clkout0_parent_names = clkout0_s3c2440_p,
+ .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2440_p),
+ .clkout1_parent_names = clkout1_s3c2440_p,
+ .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2440_p),
+ .mux_parent_names = dclk_s3c2410_p,
+ .mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p),
+ },
+ [S3C2443] = {
+ .clkout0_parent_names = clkout0_s3c2443_p,
+ .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2443_p),
+ .clkout1_parent_names = clkout1_s3c2443_p,
+ .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2443_p),
+ .mux_parent_names = dclk_s3c2443_p,
+ .mux_num_parents = ARRAY_SIZE(dclk_s3c2443_p),
+ },
+};
+
+static struct platform_device_id s3c24xx_dclk_driver_ids[] = {
+ {
+ .name = "s3c2410-dclk",
+ .driver_data = (kernel_ulong_t)&dclk_variants[S3C2410],
+ }, {
+ .name = "s3c2412-dclk",
+ .driver_data = (kernel_ulong_t)&dclk_variants[S3C2412],
+ }, {
+ .name = "s3c2440-dclk",
+ .driver_data = (kernel_ulong_t)&dclk_variants[S3C2440],
+ }, {
+ .name = "s3c2443-dclk",
+ .driver_data = (kernel_ulong_t)&dclk_variants[S3C2443],
+ },
+ { }
+};
+
+MODULE_DEVICE_TABLE(platform, s3c24xx_dclk_driver_ids);
+
+static struct platform_driver s3c24xx_dclk_driver = {
+ .driver = {
+ .name = "s3c24xx-dclk",
+ .owner = THIS_MODULE,
+ .pm = &s3c24xx_dclk_pm_ops,
+ },
+ .probe = s3c24xx_dclk_probe,
+ .remove = s3c24xx_dclk_remove,
+ .id_table = s3c24xx_dclk_driver_ids,
+};
+module_platform_driver(s3c24xx_dclk_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("Driver for the S3C24XX external clock outputs");
--- /dev/null
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for S3C2410 and following SoCs.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/s3c2410.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define LOCKTIME 0x00
+#define MPLLCON 0x04
+#define UPLLCON 0x08
+#define CLKCON 0x0c
+#define CLKSLOW 0x10
+#define CLKDIVN 0x14
+#define CAMDIVN 0x18
+
+/* the soc types */
+enum supported_socs {
+ S3C2410,
+ S3C2440,
+ S3C2442,
+};
+
+/* list of PLLs to be registered */
+enum s3c2410_plls {
+ mpll, upll,
+};
+
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *s3c2410_save;
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long s3c2410_clk_regs[] __initdata = {
+ LOCKTIME,
+ MPLLCON,
+ UPLLCON,
+ CLKCON,
+ CLKSLOW,
+ CLKDIVN,
+ CAMDIVN,
+};
+
+static int s3c2410_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, s3c2410_save,
+ ARRAY_SIZE(s3c2410_clk_regs));
+
+ return 0;
+}
+
+static void s3c2410_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, s3c2410_save,
+ ARRAY_SIZE(s3c2410_clk_regs));
+}
+
+static struct syscore_ops s3c2410_clk_syscore_ops = {
+ .suspend = s3c2410_clk_suspend,
+ .resume = s3c2410_clk_resume,
+};
+
+static void s3c2410_clk_sleep_init(void)
+{
+ s3c2410_save = samsung_clk_alloc_reg_dump(s3c2410_clk_regs,
+ ARRAY_SIZE(s3c2410_clk_regs));
+ if (!s3c2410_save) {
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+ return;
+ }
+
+ register_syscore_ops(&s3c2410_clk_syscore_ops);
+ return;
+}
+#else
+static void s3c2410_clk_sleep_init(void) {}
+#endif
+
+PNAME(fclk_p) = { "mpll", "div_slow" };
+
+struct samsung_mux_clock s3c2410_common_muxes[] __initdata = {
+ MUX(FCLK, "fclk", fclk_p, CLKSLOW, 4, 1),
+};
+
+static struct clk_div_table divslow_d[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 6 },
+ { .val = 4, .div = 8 },
+ { .val = 5, .div = 10 },
+ { .val = 6, .div = 12 },
+ { .val = 7, .div = 14 },
+ { /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2410_common_dividers[] __initdata = {
+ DIV_T(0, "div_slow", "xti", CLKSLOW, 0, 3, divslow_d),
+ DIV(PCLK, "pclk", "hclk", CLKDIVN, 0, 1),
+};
+
+struct samsung_gate_clock s3c2410_common_gates[] __initdata = {
+ GATE(PCLK_SPI, "spi", "pclk", CLKCON, 18, 0, 0),
+ GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 17, 0, 0),
+ GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 16, 0, 0),
+ GATE(PCLK_ADC, "adc", "pclk", CLKCON, 15, 0, 0),
+ GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 14, 0, 0),
+ GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 13, CLK_IGNORE_UNUSED, 0),
+ GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 12, 0, 0),
+ GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 11, 0, 0),
+ GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 10, 0, 0),
+ GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 9, 0, 0),
+ GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 8, 0, 0),
+ GATE(HCLK_USBD, "usb-device", "hclk", CLKCON, 7, 0, 0),
+ GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0),
+ GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0),
+ GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0),
+};
+
+/* should be added _after_ the soc-specific clocks are created */
+struct samsung_clock_alias s3c2410_common_aliases[] __initdata = {
+ ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"),
+ ALIAS(PCLK_ADC, NULL, "adc"),
+ ALIAS(PCLK_RTC, NULL, "rtc"),
+ ALIAS(PCLK_PWM, NULL, "timers"),
+ ALIAS(HCLK_LCD, NULL, "lcd"),
+ ALIAS(HCLK_USBD, NULL, "usb-device"),
+ ALIAS(HCLK_USBH, NULL, "usb-host"),
+ ALIAS(UCLK, NULL, "usb-bus-host"),
+ ALIAS(UCLK, NULL, "usb-bus-gadget"),
+ ALIAS(ARMCLK, NULL, "armclk"),
+ ALIAS(UCLK, NULL, "uclk"),
+ ALIAS(HCLK, NULL, "hclk"),
+ ALIAS(MPLL, NULL, "mpll"),
+ ALIAS(FCLK, NULL, "fclk"),
+};
+
+/* S3C2410 specific clocks */
+
+static struct samsung_pll_rate_table pll_s3c2410_12mhz_tbl[] __initdata = {
+ /* sorted in descending order */
+ /* 2410A extras */
+ PLL_35XX_RATE(270000000, 127, 1, 1),
+ PLL_35XX_RATE(268000000, 126, 1, 1),
+ PLL_35XX_RATE(266000000, 125, 1, 1),
+ PLL_35XX_RATE(226000000, 105, 1, 1),
+ PLL_35XX_RATE(210000000, 132, 2, 1),
+ /* 2410 common */
+ PLL_35XX_RATE(203000000, 161, 3, 1),
+ PLL_35XX_RATE(192000000, 88, 1, 1),
+ PLL_35XX_RATE(186000000, 85, 1, 1),
+ PLL_35XX_RATE(180000000, 82, 1, 1),
+ PLL_35XX_RATE(170000000, 77, 1, 1),
+ PLL_35XX_RATE(158000000, 71, 1, 1),
+ PLL_35XX_RATE(152000000, 68, 1, 1),
+ PLL_35XX_RATE(147000000, 90, 2, 1),
+ PLL_35XX_RATE(135000000, 82, 2, 1),
+ PLL_35XX_RATE(124000000, 116, 1, 2),
+ PLL_35XX_RATE(118000000, 150, 2, 2),
+ PLL_35XX_RATE(113000000, 105, 1, 2),
+ PLL_35XX_RATE(101000000, 127, 2, 2),
+ PLL_35XX_RATE(90000000, 112, 2, 2),
+ PLL_35XX_RATE(85000000, 105, 2, 2),
+ PLL_35XX_RATE(79000000, 71, 1, 2),
+ PLL_35XX_RATE(68000000, 82, 2, 2),
+ PLL_35XX_RATE(56000000, 142, 2, 3),
+ PLL_35XX_RATE(48000000, 120, 2, 3),
+ PLL_35XX_RATE(51000000, 161, 3, 3),
+ PLL_35XX_RATE(45000000, 82, 1, 3),
+ PLL_35XX_RATE(34000000, 82, 2, 3),
+ { /* sentinel */ },
+};
+
+static struct samsung_pll_clock s3c2410_plls[] __initdata = {
+ [mpll] = PLL(pll_s3c2410_mpll, MPLL, "mpll", "xti",
+ LOCKTIME, MPLLCON, NULL),
+ [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti",
+ LOCKTIME, UPLLCON, NULL),
+};
+
+struct samsung_div_clock s3c2410_dividers[] __initdata = {
+ DIV(HCLK, "hclk", "mpll", CLKDIVN, 1, 1),
+};
+
+struct samsung_fixed_factor_clock s3c2410_ffactor[] __initdata = {
+ /*
+ * armclk is directly supplied by the fclk, without
+ * switching possibility like on the s3c244x below.
+ */
+ FFACTOR(ARMCLK, "armclk", "fclk", 1, 1, 0),
+
+ /* uclk is fed from the unmodified upll */
+ FFACTOR(UCLK, "uclk", "upll", 1, 1, 0),
+};
+
+struct samsung_clock_alias s3c2410_aliases[] __initdata = {
+ ALIAS(PCLK_UART0, "s3c2410-uart.0", "uart"),
+ ALIAS(PCLK_UART1, "s3c2410-uart.1", "uart"),
+ ALIAS(PCLK_UART2, "s3c2410-uart.2", "uart"),
+ ALIAS(PCLK_UART0, "s3c2410-uart.0", "clk_uart_baud0"),
+ ALIAS(PCLK_UART1, "s3c2410-uart.1", "clk_uart_baud0"),
+ ALIAS(PCLK_UART2, "s3c2410-uart.2", "clk_uart_baud0"),
+ ALIAS(UCLK, NULL, "clk_uart_baud1"),
+};
+
+/* S3C244x specific clocks */
+
+static struct samsung_pll_rate_table pll_s3c244x_12mhz_tbl[] __initdata = {
+ /* sorted in descending order */
+ PLL_35XX_RATE(400000000, 0x5c, 1, 1),
+ PLL_35XX_RATE(390000000, 0x7a, 2, 1),
+ PLL_35XX_RATE(380000000, 0x57, 1, 1),
+ PLL_35XX_RATE(370000000, 0xb1, 4, 1),
+ PLL_35XX_RATE(360000000, 0x70, 2, 1),
+ PLL_35XX_RATE(350000000, 0xa7, 4, 1),
+ PLL_35XX_RATE(340000000, 0x4d, 1, 1),
+ PLL_35XX_RATE(330000000, 0x66, 2, 1),
+ PLL_35XX_RATE(320000000, 0x98, 4, 1),
+ PLL_35XX_RATE(310000000, 0x93, 4, 1),
+ PLL_35XX_RATE(300000000, 0x75, 3, 1),
+ PLL_35XX_RATE(240000000, 0x70, 1, 2),
+ PLL_35XX_RATE(230000000, 0x6b, 1, 2),
+ PLL_35XX_RATE(220000000, 0x66, 1, 2),
+ PLL_35XX_RATE(210000000, 0x84, 2, 2),
+ PLL_35XX_RATE(200000000, 0x5c, 1, 2),
+ PLL_35XX_RATE(190000000, 0x57, 1, 2),
+ PLL_35XX_RATE(180000000, 0x70, 2, 2),
+ PLL_35XX_RATE(170000000, 0x4d, 1, 2),
+ PLL_35XX_RATE(160000000, 0x98, 4, 2),
+ PLL_35XX_RATE(150000000, 0x75, 3, 2),
+ PLL_35XX_RATE(120000000, 0x70, 1, 3),
+ PLL_35XX_RATE(110000000, 0x66, 1, 3),
+ PLL_35XX_RATE(100000000, 0x5c, 1, 3),
+ PLL_35XX_RATE(90000000, 0x70, 2, 3),
+ PLL_35XX_RATE(80000000, 0x98, 4, 3),
+ PLL_35XX_RATE(75000000, 0x75, 3, 3),
+ { /* sentinel */ },
+};
+
+static struct samsung_pll_clock s3c244x_common_plls[] __initdata = {
+ [mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti",
+ LOCKTIME, MPLLCON, NULL),
+ [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti",
+ LOCKTIME, UPLLCON, NULL),
+};
+
+PNAME(hclk_p) = { "fclk", "div_hclk_2", "div_hclk_4", "div_hclk_3" };
+PNAME(armclk_p) = { "fclk", "hclk" };
+
+struct samsung_mux_clock s3c244x_common_muxes[] __initdata = {
+ MUX(HCLK, "hclk", hclk_p, CLKDIVN, 1, 2),
+ MUX(ARMCLK, "armclk", armclk_p, CAMDIVN, 12, 1),
+};
+
+struct samsung_fixed_factor_clock s3c244x_common_ffactor[] __initdata = {
+ FFACTOR(0, "div_hclk_2", "fclk", 1, 2, 0),
+ FFACTOR(0, "ff_cam", "div_cam", 2, 1, CLK_SET_RATE_PARENT),
+};
+
+static struct clk_div_table div_hclk_4_d[] = {
+ { .val = 0, .div = 4 },
+ { .val = 1, .div = 8 },
+ { /* sentinel */ },
+};
+
+static struct clk_div_table div_hclk_3_d[] = {
+ { .val = 0, .div = 3 },
+ { .val = 1, .div = 6 },
+ { /* sentinel */ },
+};
+
+struct samsung_div_clock s3c244x_common_dividers[] __initdata = {
+ DIV(UCLK, "uclk", "upll", CLKDIVN, 3, 1),
+ DIV(0, "div_hclk", "fclk", CLKDIVN, 1, 1),
+ DIV_T(0, "div_hclk_4", "fclk", CAMDIVN, 9, 1, div_hclk_4_d),
+ DIV_T(0, "div_hclk_3", "fclk", CAMDIVN, 8, 1, div_hclk_3_d),
+ DIV(0, "div_cam", "upll", CAMDIVN, 0, 3),
+};
+
+struct samsung_gate_clock s3c244x_common_gates[] __initdata = {
+ GATE(HCLK_CAM, "cam", "hclk", CLKCON, 19, 0, 0),
+};
+
+struct samsung_clock_alias s3c244x_common_aliases[] __initdata = {
+ ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"),
+ ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"),
+ ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"),
+ ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"),
+ ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"),
+ ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"),
+ ALIAS(HCLK_CAM, NULL, "camif"),
+ ALIAS(CAMIF, NULL, "camif-upll"),
+};
+
+/* S3C2440 specific clocks */
+
+PNAME(s3c2440_camif_p) = { "upll", "ff_cam" };
+
+struct samsung_mux_clock s3c2440_muxes[] __initdata = {
+ MUX(CAMIF, "camif", s3c2440_camif_p, CAMDIVN, 4, 1),
+};
+
+struct samsung_gate_clock s3c2440_gates[] __initdata = {
+ GATE(PCLK_AC97, "ac97", "pclk", CLKCON, 20, 0, 0),
+};
+
+/* S3C2442 specific clocks */
+
+struct samsung_fixed_factor_clock s3c2442_ffactor[] __initdata = {
+ FFACTOR(0, "upll_3", "upll", 1, 3, 0),
+};
+
+PNAME(s3c2442_camif_p) = { "upll", "ff_cam", "upll", "upll_3" };
+
+struct samsung_mux_clock s3c2442_muxes[] __initdata = {
+ MUX(CAMIF, "camif", s3c2442_camif_p, CAMDIVN, 4, 2),
+};
+
+/*
+ * fixed rate clocks generated outside the soc
+ * Only necessary until the devicetree-move is complete
+ */
+#define XTI 1
+struct samsung_fixed_rate_clock s3c2410_common_frate_clks[] __initdata = {
+ FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0),
+};
+
+static void __init s3c2410_common_clk_register_fixed_ext(
+ struct samsung_clk_provider *ctx,
+ unsigned long xti_f)
+{
+ struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal");
+
+ s3c2410_common_frate_clks[0].fixed_rate = xti_f;
+ samsung_clk_register_fixed_rate(ctx, s3c2410_common_frate_clks,
+ ARRAY_SIZE(s3c2410_common_frate_clks));
+
+ samsung_clk_register_alias(ctx, &xti_alias, 1);
+}
+
+void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
+ int current_soc,
+ void __iomem *base)
+{
+ struct samsung_clk_provider *ctx;
+ reg_base = base;
+
+ if (np) {
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+ }
+
+ ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
+
+ /* Register external clocks only in non-dt cases */
+ if (!np)
+ s3c2410_common_clk_register_fixed_ext(ctx, xti_f);
+
+ if (current_soc == 2410) {
+ if (_get_rate("xti") == 12 * MHZ) {
+ s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl;
+ s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl;
+ }
+
+ /* Register PLLs. */
+ samsung_clk_register_pll(ctx, s3c2410_plls,
+ ARRAY_SIZE(s3c2410_plls), reg_base);
+
+ } else { /* S3C2440, S3C2442 */
+ if (_get_rate("xti") == 12 * MHZ) {
+ /*
+ * plls follow different calculation schemes, with the
+ * upll following the same scheme as the s3c2410 plls
+ */
+ s3c244x_common_plls[mpll].rate_table =
+ pll_s3c244x_12mhz_tbl;
+ s3c244x_common_plls[upll].rate_table =
+ pll_s3c2410_12mhz_tbl;
+ }
+
+ /* Register PLLs. */
+ samsung_clk_register_pll(ctx, s3c244x_common_plls,
+ ARRAY_SIZE(s3c244x_common_plls), reg_base);
+ }
+
+ /* Register common internal clocks. */
+ samsung_clk_register_mux(ctx, s3c2410_common_muxes,
+ ARRAY_SIZE(s3c2410_common_muxes));
+ samsung_clk_register_div(ctx, s3c2410_common_dividers,
+ ARRAY_SIZE(s3c2410_common_dividers));
+ samsung_clk_register_gate(ctx, s3c2410_common_gates,
+ ARRAY_SIZE(s3c2410_common_gates));
+
+ if (current_soc == S3C2440 || current_soc == S3C2442) {
+ samsung_clk_register_div(ctx, s3c244x_common_dividers,
+ ARRAY_SIZE(s3c244x_common_dividers));
+ samsung_clk_register_gate(ctx, s3c244x_common_gates,
+ ARRAY_SIZE(s3c244x_common_gates));
+ samsung_clk_register_mux(ctx, s3c244x_common_muxes,
+ ARRAY_SIZE(s3c244x_common_muxes));
+ samsung_clk_register_fixed_factor(ctx, s3c244x_common_ffactor,
+ ARRAY_SIZE(s3c244x_common_ffactor));
+ }
+
+ /* Register SoC-specific clocks. */
+ switch (current_soc) {
+ case S3C2410:
+ samsung_clk_register_div(ctx, s3c2410_dividers,
+ ARRAY_SIZE(s3c2410_dividers));
+ samsung_clk_register_fixed_factor(ctx, s3c2410_ffactor,
+ ARRAY_SIZE(s3c2410_ffactor));
+ samsung_clk_register_alias(ctx, s3c2410_aliases,
+ ARRAY_SIZE(s3c2410_common_aliases));
+ break;
+ case S3C2440:
+ samsung_clk_register_mux(ctx, s3c2440_muxes,
+ ARRAY_SIZE(s3c2440_muxes));
+ samsung_clk_register_gate(ctx, s3c2440_gates,
+ ARRAY_SIZE(s3c2440_gates));
+ break;
+ case S3C2442:
+ samsung_clk_register_mux(ctx, s3c2442_muxes,
+ ARRAY_SIZE(s3c2442_muxes));
+ samsung_clk_register_fixed_factor(ctx, s3c2442_ffactor,
+ ARRAY_SIZE(s3c2442_ffactor));
+ break;
+ }
+
+ /*
+ * Register common aliases at the end, as some of the aliased clocks
+ * are SoC specific.
+ */
+ samsung_clk_register_alias(ctx, s3c2410_common_aliases,
+ ARRAY_SIZE(s3c2410_common_aliases));
+
+ if (current_soc == S3C2440 || current_soc == S3C2442) {
+ samsung_clk_register_alias(ctx, s3c244x_common_aliases,
+ ARRAY_SIZE(s3c244x_common_aliases));
+ }
+
+ s3c2410_clk_sleep_init();
+}
+
+static void __init s3c2410_clk_init(struct device_node *np)
+{
+ s3c2410_common_clk_init(np, 0, S3C2410, 0);
+}
+CLK_OF_DECLARE(s3c2410_clk, "samsung,s3c2410-clock", s3c2410_clk_init);
+
+static void __init s3c2440_clk_init(struct device_node *np)
+{
+ s3c2410_common_clk_init(np, 0, S3C2440, 0);
+}
+CLK_OF_DECLARE(s3c2440_clk, "samsung,s3c2440-clock", s3c2440_clk_init);
+
+static void __init s3c2442_clk_init(struct device_node *np)
+{
+ s3c2410_common_clk_init(np, 0, S3C2442, 0);
+}
+CLK_OF_DECLARE(s3c2442_clk, "samsung,s3c2442-clock", s3c2442_clk_init);
--- /dev/null
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for S3C2412 and S3C2413.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/s3c2412.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define LOCKTIME 0x00
+#define MPLLCON 0x04
+#define UPLLCON 0x08
+#define CLKCON 0x0c
+#define CLKDIVN 0x14
+#define CLKSRC 0x1c
+
+/* list of PLLs to be registered */
+enum s3c2412_plls {
+ mpll, upll,
+};
+
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *s3c2412_save;
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long s3c2412_clk_regs[] __initdata = {
+ LOCKTIME,
+ MPLLCON,
+ UPLLCON,
+ CLKCON,
+ CLKDIVN,
+ CLKSRC,
+};
+
+static int s3c2412_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, s3c2412_save,
+ ARRAY_SIZE(s3c2412_clk_regs));
+
+ return 0;
+}
+
+static void s3c2412_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, s3c2412_save,
+ ARRAY_SIZE(s3c2412_clk_regs));
+}
+
+static struct syscore_ops s3c2412_clk_syscore_ops = {
+ .suspend = s3c2412_clk_suspend,
+ .resume = s3c2412_clk_resume,
+};
+
+static void s3c2412_clk_sleep_init(void)
+{
+ s3c2412_save = samsung_clk_alloc_reg_dump(s3c2412_clk_regs,
+ ARRAY_SIZE(s3c2412_clk_regs));
+ if (!s3c2412_save) {
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+ return;
+ }
+
+ register_syscore_ops(&s3c2412_clk_syscore_ops);
+ return;
+}
+#else
+static void s3c2412_clk_sleep_init(void) {}
+#endif
+
+static struct clk_div_table divxti_d[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 6 },
+ { .val = 4, .div = 8 },
+ { .val = 5, .div = 10 },
+ { .val = 6, .div = 12 },
+ { .val = 7, .div = 14 },
+ { /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2412_dividers[] __initdata = {
+ DIV_T(0, "div_xti", "xti", CLKSRC, 0, 3, divxti_d),
+ DIV(0, "div_cam", "mux_cam", CLKDIVN, 16, 4),
+ DIV(0, "div_i2s", "mux_i2s", CLKDIVN, 12, 4),
+ DIV(0, "div_uart", "mux_uart", CLKDIVN, 8, 4),
+ DIV(0, "div_usb", "mux_usb", CLKDIVN, 6, 1),
+ DIV(0, "div_hclk_half", "hclk", CLKDIVN, 5, 1),
+ DIV(ARMDIV, "armdiv", "msysclk", CLKDIVN, 3, 1),
+ DIV(PCLK, "pclk", "hclk", CLKDIVN, 2, 1),
+ DIV(HCLK, "hclk", "armdiv", CLKDIVN, 0, 2),
+};
+
+struct samsung_fixed_factor_clock s3c2412_ffactor[] __initdata = {
+ FFACTOR(0, "ff_hclk", "hclk", 2, 1, CLK_SET_RATE_PARENT),
+};
+
+/*
+ * The first two use the OM[4] setting, which is not readable from
+ * software, so assume it is set to xti.
+ */
+PNAME(erefclk_p) = { "xti", "xti", "xti", "ext" };
+PNAME(urefclk_p) = { "xti", "xti", "xti", "ext" };
+
+PNAME(camclk_p) = { "usysclk", "hclk" };
+PNAME(usbclk_p) = { "usysclk", "hclk" };
+PNAME(i2sclk_p) = { "erefclk", "mpll" };
+PNAME(uartclk_p) = { "erefclk", "mpll" };
+PNAME(usysclk_p) = { "urefclk", "upll" };
+PNAME(msysclk_p) = { "mdivclk", "mpll" };
+PNAME(mdivclk_p) = { "xti", "div_xti" };
+PNAME(armclk_p) = { "armdiv", "hclk" };
+
+struct samsung_mux_clock s3c2412_muxes[] __initdata = {
+ MUX(0, "erefclk", erefclk_p, CLKSRC, 14, 2),
+ MUX(0, "urefclk", urefclk_p, CLKSRC, 12, 2),
+ MUX(0, "mux_cam", camclk_p, CLKSRC, 11, 1),
+ MUX(0, "mux_usb", usbclk_p, CLKSRC, 10, 1),
+ MUX(0, "mux_i2s", i2sclk_p, CLKSRC, 9, 1),
+ MUX(0, "mux_uart", uartclk_p, CLKSRC, 8, 1),
+ MUX(USYSCLK, "usysclk", usysclk_p, CLKSRC, 5, 1),
+ MUX(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1),
+ MUX(MDIVCLK, "mdivclk", mdivclk_p, CLKSRC, 3, 1),
+ MUX(ARMCLK, "armclk", armclk_p, CLKDIVN, 4, 1),
+};
+
+static struct samsung_pll_clock s3c2412_plls[] __initdata = {
+ [mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti",
+ LOCKTIME, MPLLCON, NULL),
+ [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "urefclk",
+ LOCKTIME, UPLLCON, NULL),
+};
+
+struct samsung_gate_clock s3c2412_gates[] __initdata = {
+ GATE(PCLK_WDT, "wdt", "pclk", CLKCON, 28, 0, 0),
+ GATE(PCLK_SPI, "spi", "pclk", CLKCON, 27, 0, 0),
+ GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 26, 0, 0),
+ GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 25, 0, 0),
+ GATE(PCLK_ADC, "adc", "pclk", CLKCON, 24, 0, 0),
+ GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 23, 0, 0),
+ GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 22, CLK_IGNORE_UNUSED, 0),
+ GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 21, 0, 0),
+ GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 20, 0, 0),
+ GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 19, 0, 0),
+ GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 18, 0, 0),
+ GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 17, 0, 0),
+ GATE(PCLK_USBD, "usb-device", "pclk", CLKCON, 16, 0, 0),
+ GATE(SCLK_CAM, "sclk_cam", "div_cam", CLKCON, 15, 0, 0),
+ GATE(SCLK_UART, "sclk_uart", "div_uart", CLKCON, 14, 0, 0),
+ GATE(SCLK_I2S, "sclk_i2s", "div_i2s", CLKCON, 13, 0, 0),
+ GATE(SCLK_USBH, "sclk_usbh", "div_usb", CLKCON, 12, 0, 0),
+ GATE(SCLK_USBD, "sclk_usbd", "div_usb", CLKCON, 11, 0, 0),
+ GATE(HCLK_HALF, "hclk_half", "div_hclk_half", CLKCON, 10, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_X2, "hclkx2", "ff_hclk", CLKCON, 9, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_SDRAM, "sdram", "hclk", CLKCON, 8, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0),
+ GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0),
+ GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0),
+ GATE(HCLK_DMA3, "dma3", "hclk", CLKCON, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_DMA2, "dma2", "hclk", CLKCON, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_DMA1, "dma1", "hclk", CLKCON, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_DMA0, "dma0", "hclk", CLKCON, 0, CLK_IGNORE_UNUSED, 0),
+};
+
+struct samsung_clock_alias s3c2412_aliases[] __initdata = {
+ ALIAS(PCLK_UART0, "s3c2412-uart.0", "uart"),
+ ALIAS(PCLK_UART1, "s3c2412-uart.1", "uart"),
+ ALIAS(PCLK_UART2, "s3c2412-uart.2", "uart"),
+ ALIAS(PCLK_UART0, "s3c2412-uart.0", "clk_uart_baud2"),
+ ALIAS(PCLK_UART1, "s3c2412-uart.1", "clk_uart_baud2"),
+ ALIAS(PCLK_UART2, "s3c2412-uart.2", "clk_uart_baud2"),
+ ALIAS(SCLK_UART, NULL, "clk_uart_baud3"),
+ ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"),
+ ALIAS(PCLK_ADC, NULL, "adc"),
+ ALIAS(PCLK_RTC, NULL, "rtc"),
+ ALIAS(PCLK_PWM, NULL, "timers"),
+ ALIAS(HCLK_LCD, NULL, "lcd"),
+ ALIAS(PCLK_USBD, NULL, "usb-device"),
+ ALIAS(SCLK_USBD, NULL, "usb-bus-gadget"),
+ ALIAS(HCLK_USBH, NULL, "usb-host"),
+ ALIAS(SCLK_USBH, NULL, "usb-bus-host"),
+ ALIAS(ARMCLK, NULL, "armclk"),
+ ALIAS(HCLK, NULL, "hclk"),
+ ALIAS(MPLL, NULL, "mpll"),
+ ALIAS(MSYSCLK, NULL, "fclk"),
+};
+
+/*
+ * fixed rate clocks generated outside the soc
+ * Only necessary until the devicetree-move is complete
+ */
+#define XTI 1
+struct samsung_fixed_rate_clock s3c2412_common_frate_clks[] __initdata = {
+ FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0),
+ FRATE(0, "ext", NULL, CLK_IS_ROOT, 0),
+};
+
+static void __init s3c2412_common_clk_register_fixed_ext(
+ struct samsung_clk_provider *ctx,
+ unsigned long xti_f, unsigned long ext_f)
+{
+ /* xtal alias is necessary for the current cpufreq driver */
+ struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal");
+
+ s3c2412_common_frate_clks[0].fixed_rate = xti_f;
+ s3c2412_common_frate_clks[1].fixed_rate = ext_f;
+ samsung_clk_register_fixed_rate(ctx, s3c2412_common_frate_clks,
+ ARRAY_SIZE(s3c2412_common_frate_clks));
+
+ samsung_clk_register_alias(ctx, &xti_alias, 1);
+}
+
+void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
+ unsigned long ext_f, void __iomem *base)
+{
+ struct samsung_clk_provider *ctx;
+ reg_base = base;
+
+ if (np) {
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+ }
+
+ ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
+
+ /* Register external clocks only in non-dt cases */
+ if (!np)
+ s3c2412_common_clk_register_fixed_ext(ctx, xti_f, ext_f);
+
+ /* Register PLLs. */
+ samsung_clk_register_pll(ctx, s3c2412_plls, ARRAY_SIZE(s3c2412_plls),
+ reg_base);
+
+ /* Register common internal clocks. */
+ samsung_clk_register_mux(ctx, s3c2412_muxes, ARRAY_SIZE(s3c2412_muxes));
+ samsung_clk_register_div(ctx, s3c2412_dividers,
+ ARRAY_SIZE(s3c2412_dividers));
+ samsung_clk_register_gate(ctx, s3c2412_gates,
+ ARRAY_SIZE(s3c2412_gates));
+ samsung_clk_register_fixed_factor(ctx, s3c2412_ffactor,
+ ARRAY_SIZE(s3c2412_ffactor));
+ samsung_clk_register_alias(ctx, s3c2412_aliases,
+ ARRAY_SIZE(s3c2412_aliases));
+
+ s3c2412_clk_sleep_init();
+}
+
+static void __init s3c2412_clk_init(struct device_node *np)
+{
+ s3c2412_common_clk_init(np, 0, 0, 0);
+}
+CLK_OF_DECLARE(s3c2412_clk, "samsung,s3c2412-clock", s3c2412_clk_init);
--- /dev/null
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for S3C2443 and following SoCs.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/s3c2443.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+/* S3C2416 clock controller register offsets */
+#define LOCKCON0 0x00
+#define LOCKCON1 0x04
+#define MPLLCON 0x10
+#define EPLLCON 0x18
+#define EPLLCON_K 0x1C
+#define CLKSRC 0x20
+#define CLKDIV0 0x24
+#define CLKDIV1 0x28
+#define CLKDIV2 0x2C
+#define HCLKCON 0x30
+#define PCLKCON 0x34
+#define SCLKCON 0x38
+
+/* the soc types */
+enum supported_socs {
+ S3C2416,
+ S3C2443,
+ S3C2450,
+};
+
+/* list of PLLs to be registered */
+enum s3c2443_plls {
+ mpll, epll,
+};
+
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *s3c2443_save;
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long s3c2443_clk_regs[] __initdata = {
+ LOCKCON0,
+ LOCKCON1,
+ MPLLCON,
+ EPLLCON,
+ EPLLCON_K,
+ CLKSRC,
+ CLKDIV0,
+ CLKDIV1,
+ CLKDIV2,
+ PCLKCON,
+ HCLKCON,
+ SCLKCON,
+};
+
+static int s3c2443_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, s3c2443_save,
+ ARRAY_SIZE(s3c2443_clk_regs));
+
+ return 0;
+}
+
+static void s3c2443_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, s3c2443_save,
+ ARRAY_SIZE(s3c2443_clk_regs));
+}
+
+static struct syscore_ops s3c2443_clk_syscore_ops = {
+ .suspend = s3c2443_clk_suspend,
+ .resume = s3c2443_clk_resume,
+};
+
+static void s3c2443_clk_sleep_init(void)
+{
+ s3c2443_save = samsung_clk_alloc_reg_dump(s3c2443_clk_regs,
+ ARRAY_SIZE(s3c2443_clk_regs));
+ if (!s3c2443_save) {
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+ return;
+ }
+
+ register_syscore_ops(&s3c2443_clk_syscore_ops);
+ return;
+}
+#else
+static void s3c2443_clk_sleep_init(void) {}
+#endif
+
+PNAME(epllref_p) = { "mpllref", "mpllref", "xti", "ext" };
+PNAME(esysclk_p) = { "epllref", "epll" };
+PNAME(mpllref_p) = { "xti", "mdivclk" };
+PNAME(msysclk_p) = { "mpllref", "mpll" };
+PNAME(armclk_p) = { "armdiv" , "hclk" };
+PNAME(i2s0_p) = { "div_i2s0", "ext_i2s", "epllref", "epllref" };
+
+struct samsung_mux_clock s3c2443_common_muxes[] __initdata = {
+ MUX(0, "epllref", epllref_p, CLKSRC, 7, 2),
+ MUX(ESYSCLK, "esysclk", esysclk_p, CLKSRC, 6, 1),
+ MUX(0, "mpllref", mpllref_p, CLKSRC, 3, 1),
+ MUX_A(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1, "msysclk"),
+ MUX_A(ARMCLK, "armclk", armclk_p, CLKDIV0, 13, 1, "armclk"),
+ MUX(0, "mux_i2s0", i2s0_p, CLKSRC, 14, 2),
+};
+
+static struct clk_div_table hclk_d[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 3, .div = 4 },
+ { /* sentinel */ },
+};
+
+static struct clk_div_table mdivclk_d[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 3 },
+ { .val = 2, .div = 5 },
+ { .val = 3, .div = 7 },
+ { .val = 4, .div = 9 },
+ { .val = 5, .div = 11 },
+ { .val = 6, .div = 13 },
+ { .val = 7, .div = 15 },
+ { /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2443_common_dividers[] __initdata = {
+ DIV_T(0, "mdivclk", "xti", CLKDIV0, 6, 3, mdivclk_d),
+ DIV(0, "prediv", "msysclk", CLKDIV0, 4, 2),
+ DIV_T(HCLK, "hclk", "prediv", CLKDIV0, 0, 2, hclk_d),
+ DIV(PCLK, "pclk", "hclk", CLKDIV0, 2, 1),
+ DIV(0, "div_hsspi0_epll", "esysclk", CLKDIV1, 24, 2),
+ DIV(0, "div_fimd", "esysclk", CLKDIV1, 16, 8),
+ DIV(0, "div_i2s0", "esysclk", CLKDIV1, 12, 4),
+ DIV(0, "div_uart", "esysclk", CLKDIV1, 8, 4),
+ DIV(0, "div_hsmmc1", "esysclk", CLKDIV1, 6, 2),
+ DIV(0, "div_usbhost", "esysclk", CLKDIV1, 4, 2),
+};
+
+struct samsung_gate_clock s3c2443_common_gates[] __initdata = {
+ GATE(SCLK_HSMMC_EXT, "sclk_hsmmcext", "ext", SCLKCON, 13, 0, 0),
+ GATE(SCLK_HSMMC1, "sclk_hsmmc1", "div_hsmmc1", SCLKCON, 12, 0, 0),
+ GATE(SCLK_FIMD, "sclk_fimd", "div_fimd", SCLKCON, 10, 0, 0),
+ GATE(SCLK_I2S0, "sclk_i2s0", "mux_i2s0", SCLKCON, 9, 0, 0),
+ GATE(SCLK_UART, "sclk_uart", "div_uart", SCLKCON, 8, 0, 0),
+ GATE(SCLK_USBH, "sclk_usbhost", "div_usbhost", SCLKCON, 1, 0, 0),
+ GATE(HCLK_DRAM, "dram", "hclk", HCLKCON, 19, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_SSMC, "ssmc", "hclk", HCLKCON, 18, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_HSMMC1, "hsmmc1", "hclk", HCLKCON, 16, 0, 0),
+ GATE(HCLK_USBD, "usb-device", "hclk", HCLKCON, 12, 0, 0),
+ GATE(HCLK_USBH, "usb-host", "hclk", HCLKCON, 11, 0, 0),
+ GATE(HCLK_LCD, "lcd", "hclk", HCLKCON, 9, 0, 0),
+ GATE(HCLK_DMA5, "dma5", "hclk", HCLKCON, 5, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_DMA4, "dma4", "hclk", HCLKCON, 4, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_DMA3, "dma3", "hclk", HCLKCON, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_DMA2, "dma2", "hclk", HCLKCON, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_DMA1, "dma1", "hclk", HCLKCON, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_DMA0, "dma0", "hclk", HCLKCON, 0, CLK_IGNORE_UNUSED, 0),
+ GATE(PCLK_GPIO, "gpio", "pclk", PCLKCON, 13, CLK_IGNORE_UNUSED, 0),
+ GATE(PCLK_RTC, "rtc", "pclk", PCLKCON, 12, 0, 0),
+ GATE(PCLK_WDT, "wdt", "pclk", PCLKCON, 11, 0, 0),
+ GATE(PCLK_PWM, "pwm", "pclk", PCLKCON, 10, 0, 0),
+ GATE(PCLK_I2S0, "i2s0", "pclk", PCLKCON, 9, 0, 0),
+ GATE(PCLK_AC97, "ac97", "pclk", PCLKCON, 8, 0, 0),
+ GATE(PCLK_ADC, "adc", "pclk", PCLKCON, 7, 0, 0),
+ GATE(PCLK_SPI0, "spi0", "pclk", PCLKCON, 6, 0, 0),
+ GATE(PCLK_I2C0, "i2c0", "pclk", PCLKCON, 4, 0, 0),
+ GATE(PCLK_UART3, "uart3", "pclk", PCLKCON, 3, 0, 0),
+ GATE(PCLK_UART2, "uart2", "pclk", PCLKCON, 2, 0, 0),
+ GATE(PCLK_UART1, "uart1", "pclk", PCLKCON, 1, 0, 0),
+ GATE(PCLK_UART0, "uart0", "pclk", PCLKCON, 0, 0, 0),
+};
+
+struct samsung_clock_alias s3c2443_common_aliases[] __initdata = {
+ ALIAS(HCLK, NULL, "hclk"),
+ ALIAS(HCLK_SSMC, NULL, "nand"),
+ ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"),
+ ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"),
+ ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"),
+ ALIAS(PCLK_UART3, "s3c2440-uart.3", "uart"),
+ ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"),
+ ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"),
+ ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"),
+ ALIAS(PCLK_UART3, "s3c2440-uart.3", "clk_uart_baud2"),
+ ALIAS(SCLK_UART, NULL, "clk_uart_baud3"),
+ ALIAS(PCLK_PWM, NULL, "timers"),
+ ALIAS(PCLK_RTC, NULL, "rtc"),
+ ALIAS(PCLK_WDT, NULL, "watchdog"),
+ ALIAS(PCLK_ADC, NULL, "adc"),
+ ALIAS(PCLK_I2C0, "s3c2410-i2c.0", "i2c"),
+ ALIAS(HCLK_USBD, NULL, "usb-device"),
+ ALIAS(HCLK_USBH, NULL, "usb-host"),
+ ALIAS(SCLK_USBH, NULL, "usb-bus-host"),
+ ALIAS(PCLK_SPI0, "s3c2443-spi.0", "spi"),
+ ALIAS(PCLK_SPI0, "s3c2443-spi.0", "spi_busclk0"),
+ ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "hsmmc"),
+ ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.0"),
+ ALIAS(PCLK_I2S0, "samsung-i2s.0", "iis"),
+ ALIAS(SCLK_I2S0, NULL, "i2s-if"),
+ ALIAS(HCLK_LCD, NULL, "lcd"),
+ ALIAS(SCLK_FIMD, NULL, "sclk_fimd"),
+};
+
+/* S3C2416 specific clocks */
+
+static struct samsung_pll_clock s3c2416_pll_clks[] __initdata = {
+ [mpll] = PLL(pll_6552_s3c2416, 0, "mpll", "mpllref",
+ LOCKCON0, MPLLCON, NULL),
+ [epll] = PLL(pll_6553, 0, "epll", "epllref",
+ LOCKCON1, EPLLCON, NULL),
+};
+
+PNAME(s3c2416_hsmmc0_p) = { "sclk_hsmmc0", "sclk_hsmmcext" };
+PNAME(s3c2416_hsmmc1_p) = { "sclk_hsmmc1", "sclk_hsmmcext" };
+PNAME(s3c2416_hsspi0_p) = { "hsspi0_epll", "hsspi0_mpll" };
+
+static struct clk_div_table armdiv_s3c2416_d[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 3 },
+ { .val = 3, .div = 4 },
+ { .val = 5, .div = 6 },
+ { .val = 7, .div = 8 },
+ { /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2416_dividers[] __initdata = {
+ DIV_T(ARMDIV, "armdiv", "msysclk", CLKDIV0, 9, 3, armdiv_s3c2416_d),
+ DIV(0, "div_hsspi0_mpll", "msysclk", CLKDIV2, 0, 4),
+ DIV(0, "div_hsmmc0", "esysclk", CLKDIV2, 6, 2),
+};
+
+struct samsung_mux_clock s3c2416_muxes[] __initdata = {
+ MUX(MUX_HSMMC0, "mux_hsmmc0", s3c2416_hsmmc0_p, CLKSRC, 16, 1),
+ MUX(MUX_HSMMC1, "mux_hsmmc1", s3c2416_hsmmc1_p, CLKSRC, 17, 1),
+ MUX(MUX_HSSPI0, "mux_hsspi0", s3c2416_hsspi0_p, CLKSRC, 18, 1),
+};
+
+struct samsung_gate_clock s3c2416_gates[] __initdata = {
+ GATE(0, "hsspi0_mpll", "div_hsspi0_mpll", SCLKCON, 19, 0, 0),
+ GATE(0, "hsspi0_epll", "div_hsspi0_epll", SCLKCON, 14, 0, 0),
+ GATE(0, "sclk_hsmmc0", "div_hsmmc0", SCLKCON, 6, 0, 0),
+ GATE(HCLK_2D, "2d", "hclk", HCLKCON, 20, 0, 0),
+ GATE(HCLK_HSMMC0, "hsmmc0", "hclk", HCLKCON, 15, 0, 0),
+ GATE(HCLK_IROM, "irom", "hclk", HCLKCON, 13, CLK_IGNORE_UNUSED, 0),
+ GATE(PCLK_PCM, "pcm", "pclk", PCLKCON, 19, 0, 0),
+};
+
+struct samsung_clock_alias s3c2416_aliases[] __initdata = {
+ ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "hsmmc"),
+ ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "mmc_busclk.0"),
+ ALIAS(MUX_HSMMC0, "s3c-sdhci.0", "mmc_busclk.2"),
+ ALIAS(MUX_HSMMC1, "s3c-sdhci.1", "mmc_busclk.2"),
+ ALIAS(MUX_HSSPI0, "s3c2443-spi.0", "spi_busclk2"),
+ ALIAS(ARMDIV, NULL, "armdiv"),
+};
+
+/* S3C2443 specific clocks */
+
+static struct samsung_pll_clock s3c2443_pll_clks[] __initdata = {
+ [mpll] = PLL(pll_3000, 0, "mpll", "mpllref",
+ LOCKCON0, MPLLCON, NULL),
+ [epll] = PLL(pll_2126, 0, "epll", "epllref",
+ LOCKCON1, EPLLCON, NULL),
+};
+
+static struct clk_div_table armdiv_s3c2443_d[] = {
+ { .val = 0, .div = 1 },
+ { .val = 8, .div = 2 },
+ { .val = 2, .div = 3 },
+ { .val = 9, .div = 4 },
+ { .val = 10, .div = 6 },
+ { .val = 11, .div = 8 },
+ { .val = 13, .div = 12 },
+ { .val = 15, .div = 16 },
+ { /* sentinel */ },
+};
+
+struct samsung_div_clock s3c2443_dividers[] __initdata = {
+ DIV_T(ARMDIV, "armdiv", "msysclk", CLKDIV0, 9, 4, armdiv_s3c2443_d),
+ DIV(0, "div_cam", "esysclk", CLKDIV1, 26, 4),
+};
+
+struct samsung_gate_clock s3c2443_gates[] __initdata = {
+ GATE(SCLK_HSSPI0, "sclk_hsspi0", "div_hsspi0_epll", SCLKCON, 14, 0, 0),
+ GATE(SCLK_CAM, "sclk_cam", "div_cam", SCLKCON, 11, 0, 0),
+ GATE(HCLK_CFC, "cfc", "hclk", HCLKCON, 17, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_CAM, "cam", "hclk", HCLKCON, 8, 0, 0),
+ GATE(PCLK_SPI1, "spi1", "pclk", PCLKCON, 15, 0, 0),
+ GATE(PCLK_SDI, "sdi", "pclk", PCLKCON, 5, 0, 0),
+};
+
+struct samsung_clock_alias s3c2443_aliases[] __initdata = {
+ ALIAS(SCLK_HSSPI0, "s3c2443-spi.0", "spi_busclk2"),
+ ALIAS(SCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.2"),
+ ALIAS(SCLK_CAM, NULL, "camif-upll"),
+ ALIAS(PCLK_SPI1, "s3c2410-spi.0", "spi"),
+ ALIAS(PCLK_SDI, NULL, "sdi"),
+ ALIAS(HCLK_CFC, NULL, "cfc"),
+ ALIAS(ARMDIV, NULL, "armdiv"),
+};
+
+/* S3C2450 specific clocks */
+
+PNAME(s3c2450_cam_p) = { "div_cam", "hclk" };
+PNAME(s3c2450_hsspi1_p) = { "hsspi1_epll", "hsspi1_mpll" };
+PNAME(i2s1_p) = { "div_i2s1", "ext_i2s", "epllref", "epllref" };
+
+struct samsung_div_clock s3c2450_dividers[] __initdata = {
+ DIV(0, "div_cam", "esysclk", CLKDIV1, 26, 4),
+ DIV(0, "div_hsspi1_epll", "esysclk", CLKDIV2, 24, 2),
+ DIV(0, "div_hsspi1_mpll", "msysclk", CLKDIV2, 16, 4),
+ DIV(0, "div_i2s1", "esysclk", CLKDIV2, 12, 4),
+};
+
+struct samsung_mux_clock s3c2450_muxes[] __initdata = {
+ MUX(0, "mux_cam", s3c2450_cam_p, CLKSRC, 20, 1),
+ MUX(MUX_HSSPI1, "mux_hsspi1", s3c2450_hsspi1_p, CLKSRC, 19, 1),
+ MUX(0, "mux_i2s1", i2s1_p, CLKSRC, 12, 2),
+};
+
+struct samsung_gate_clock s3c2450_gates[] __initdata = {
+ GATE(SCLK_I2S1, "sclk_i2s1", "div_i2s1", SCLKCON, 5, 0, 0),
+ GATE(HCLK_CFC, "cfc", "hclk", HCLKCON, 17, 0, 0),
+ GATE(HCLK_CAM, "cam", "hclk", HCLKCON, 8, 0, 0),
+ GATE(HCLK_DMA7, "dma7", "hclk", HCLKCON, 7, CLK_IGNORE_UNUSED, 0),
+ GATE(HCLK_DMA6, "dma6", "hclk", HCLKCON, 6, CLK_IGNORE_UNUSED, 0),
+ GATE(PCLK_I2S1, "i2s1", "pclk", PCLKCON, 17, 0, 0),
+ GATE(PCLK_I2C1, "i2c1", "pclk", PCLKCON, 16, 0, 0),
+ GATE(PCLK_SPI1, "spi1", "pclk", PCLKCON, 14, 0, 0),
+};
+
+struct samsung_clock_alias s3c2450_aliases[] __initdata = {
+ ALIAS(PCLK_SPI1, "s3c2443-spi.1", "spi"),
+ ALIAS(PCLK_SPI1, "s3c2443-spi.1", "spi_busclk0"),
+ ALIAS(MUX_HSSPI1, "s3c2443-spi.1", "spi_busclk2"),
+ ALIAS(PCLK_I2C1, "s3c2410-i2c.1", "i2c"),
+};
+
+/*
+ * fixed rate clocks generated outside the soc
+ * Only necessary until the devicetree-move is complete
+ */
+struct samsung_fixed_rate_clock s3c2443_common_frate_clks[] __initdata = {
+ FRATE(0, "xti", NULL, CLK_IS_ROOT, 0),
+ FRATE(0, "ext", NULL, CLK_IS_ROOT, 0),
+ FRATE(0, "ext_i2s", NULL, CLK_IS_ROOT, 0),
+ FRATE(0, "ext_uart", NULL, CLK_IS_ROOT, 0),
+};
+
+static void __init s3c2443_common_clk_register_fixed_ext(
+ struct samsung_clk_provider *ctx, unsigned long xti_f)
+{
+ s3c2443_common_frate_clks[0].fixed_rate = xti_f;
+ samsung_clk_register_fixed_rate(ctx, s3c2443_common_frate_clks,
+ ARRAY_SIZE(s3c2443_common_frate_clks));
+}
+
+void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
+ int current_soc,
+ void __iomem *base)
+{
+ struct samsung_clk_provider *ctx;
+ reg_base = base;
+
+ if (np) {
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+ }
+
+ ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
+
+ /* Register external clocks only in non-dt cases */
+ if (!np)
+ s3c2443_common_clk_register_fixed_ext(ctx, xti_f);
+
+ /* Register PLLs. */
+ if (current_soc == S3C2416 || current_soc == S3C2450)
+ samsung_clk_register_pll(ctx, s3c2416_pll_clks,
+ ARRAY_SIZE(s3c2416_pll_clks), reg_base);
+ else
+ samsung_clk_register_pll(ctx, s3c2443_pll_clks,
+ ARRAY_SIZE(s3c2443_pll_clks), reg_base);
+
+ /* Register common internal clocks. */
+ samsung_clk_register_mux(ctx, s3c2443_common_muxes,
+ ARRAY_SIZE(s3c2443_common_muxes));
+ samsung_clk_register_div(ctx, s3c2443_common_dividers,
+ ARRAY_SIZE(s3c2443_common_dividers));
+ samsung_clk_register_gate(ctx, s3c2443_common_gates,
+ ARRAY_SIZE(s3c2443_common_gates));
+ samsung_clk_register_alias(ctx, s3c2443_common_aliases,
+ ARRAY_SIZE(s3c2443_common_aliases));
+
+ /* Register SoC-specific clocks. */
+ switch (current_soc) {
+ case S3C2450:
+ samsung_clk_register_div(ctx, s3c2450_dividers,
+ ARRAY_SIZE(s3c2450_dividers));
+ samsung_clk_register_mux(ctx, s3c2450_muxes,
+ ARRAY_SIZE(s3c2450_muxes));
+ samsung_clk_register_gate(ctx, s3c2450_gates,
+ ARRAY_SIZE(s3c2450_gates));
+ samsung_clk_register_alias(ctx, s3c2450_aliases,
+ ARRAY_SIZE(s3c2450_aliases));
+ /* fall through, as s3c2450 extends the s3c2416 clocks */
+ case S3C2416:
+ samsung_clk_register_div(ctx, s3c2416_dividers,
+ ARRAY_SIZE(s3c2416_dividers));
+ samsung_clk_register_mux(ctx, s3c2416_muxes,
+ ARRAY_SIZE(s3c2416_muxes));
+ samsung_clk_register_gate(ctx, s3c2416_gates,
+ ARRAY_SIZE(s3c2416_gates));
+ samsung_clk_register_alias(ctx, s3c2416_aliases,
+ ARRAY_SIZE(s3c2416_aliases));
+ break;
+ case S3C2443:
+ samsung_clk_register_div(ctx, s3c2443_dividers,
+ ARRAY_SIZE(s3c2443_dividers));
+ samsung_clk_register_gate(ctx, s3c2443_gates,
+ ARRAY_SIZE(s3c2443_gates));
+ samsung_clk_register_alias(ctx, s3c2443_aliases,
+ ARRAY_SIZE(s3c2443_aliases));
+ break;
+ }
+
+ s3c2443_clk_sleep_init();
+}
+
+static void __init s3c2416_clk_init(struct device_node *np)
+{
+ s3c2443_common_clk_init(np, 0, S3C2416, 0);
+}
+CLK_OF_DECLARE(s3c2416_clk, "samsung,s3c2416-clock", s3c2416_clk_init);
+
+static void __init s3c2443_clk_init(struct device_node *np)
+{
+ s3c2443_common_clk_init(np, 0, S3C2443, 0);
+}
+CLK_OF_DECLARE(s3c2443_clk, "samsung,s3c2443-clock", s3c2443_clk_init);
+
+static void __init s3c2450_clk_init(struct device_node *np)
+{
+ s3c2443_common_clk_init(np, 0, S3C2450, 0);
+}
+CLK_OF_DECLARE(s3c2450_clk, "samsung,s3c2450-clock", s3c2450_clk_init);
ALIAS(MEM0_SROM, NULL, "srom"),
};
-static void __init s3c64xx_clk_register_fixed_ext(unsigned long fin_pll_f,
- unsigned long xusbxti_f)
+static void __init s3c64xx_clk_register_fixed_ext(
+ struct samsung_clk_provider *ctx,
+ unsigned long fin_pll_f,
+ unsigned long xusbxti_f)
{
s3c64xx_fixed_rate_ext_clks[0].fixed_rate = fin_pll_f;
s3c64xx_fixed_rate_ext_clks[1].fixed_rate = xusbxti_f;
- samsung_clk_register_fixed_rate(s3c64xx_fixed_rate_ext_clks,
+ samsung_clk_register_fixed_rate(ctx, s3c64xx_fixed_rate_ext_clks,
ARRAY_SIZE(s3c64xx_fixed_rate_ext_clks));
}
unsigned long xusbxti_f, bool s3c6400,
void __iomem *base)
{
+ struct samsung_clk_provider *ctx;
+
reg_base = base;
is_s3c6400 = s3c6400;
panic("%s: failed to map registers\n", __func__);
}
- samsung_clk_init(np, reg_base, NR_CLKS);
+ ctx = samsung_clk_init(np, reg_base, NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
/* Register external clocks. */
if (!np)
- s3c64xx_clk_register_fixed_ext(xtal_f, xusbxti_f);
+ s3c64xx_clk_register_fixed_ext(ctx, xtal_f, xusbxti_f);
/* Register PLLs. */
- samsung_clk_register_pll(s3c64xx_pll_clks,
+ samsung_clk_register_pll(ctx, s3c64xx_pll_clks,
ARRAY_SIZE(s3c64xx_pll_clks), reg_base);
/* Register common internal clocks. */
- samsung_clk_register_fixed_rate(s3c64xx_fixed_rate_clks,
+ samsung_clk_register_fixed_rate(ctx, s3c64xx_fixed_rate_clks,
ARRAY_SIZE(s3c64xx_fixed_rate_clks));
- samsung_clk_register_mux(s3c64xx_mux_clks,
+ samsung_clk_register_mux(ctx, s3c64xx_mux_clks,
ARRAY_SIZE(s3c64xx_mux_clks));
- samsung_clk_register_div(s3c64xx_div_clks,
+ samsung_clk_register_div(ctx, s3c64xx_div_clks,
ARRAY_SIZE(s3c64xx_div_clks));
- samsung_clk_register_gate(s3c64xx_gate_clks,
+ samsung_clk_register_gate(ctx, s3c64xx_gate_clks,
ARRAY_SIZE(s3c64xx_gate_clks));
/* Register SoC-specific clocks. */
if (is_s3c6400) {
- samsung_clk_register_mux(s3c6400_mux_clks,
+ samsung_clk_register_mux(ctx, s3c6400_mux_clks,
ARRAY_SIZE(s3c6400_mux_clks));
- samsung_clk_register_div(s3c6400_div_clks,
+ samsung_clk_register_div(ctx, s3c6400_div_clks,
ARRAY_SIZE(s3c6400_div_clks));
- samsung_clk_register_gate(s3c6400_gate_clks,
+ samsung_clk_register_gate(ctx, s3c6400_gate_clks,
ARRAY_SIZE(s3c6400_gate_clks));
- samsung_clk_register_alias(s3c6400_clock_aliases,
+ samsung_clk_register_alias(ctx, s3c6400_clock_aliases,
ARRAY_SIZE(s3c6400_clock_aliases));
} else {
- samsung_clk_register_mux(s3c6410_mux_clks,
+ samsung_clk_register_mux(ctx, s3c6410_mux_clks,
ARRAY_SIZE(s3c6410_mux_clks));
- samsung_clk_register_div(s3c6410_div_clks,
+ samsung_clk_register_div(ctx, s3c6410_div_clks,
ARRAY_SIZE(s3c6410_div_clks));
- samsung_clk_register_gate(s3c6410_gate_clks,
+ samsung_clk_register_gate(ctx, s3c6410_gate_clks,
ARRAY_SIZE(s3c6410_gate_clks));
- samsung_clk_register_alias(s3c6410_clock_aliases,
+ samsung_clk_register_alias(ctx, s3c6410_clock_aliases,
ARRAY_SIZE(s3c6410_clock_aliases));
}
- samsung_clk_register_alias(s3c64xx_clock_aliases,
+ samsung_clk_register_alias(ctx, s3c64xx_clock_aliases,
ARRAY_SIZE(s3c64xx_clock_aliases));
s3c64xx_clk_sleep_init();
#include <linux/syscore_ops.h>
#include "clk.h"
-static DEFINE_SPINLOCK(lock);
-static struct clk **clk_table;
-static void __iomem *reg_base;
-#ifdef CONFIG_OF
-static struct clk_onecell_data clk_data;
-#endif
-
void samsung_clk_save(void __iomem *base,
struct samsung_clk_reg_dump *rd,
unsigned int num_regs)
}
/* setup the essentials required to support clock lookup using ccf */
-void __init samsung_clk_init(struct device_node *np, void __iomem *base,
- unsigned long nr_clks)
+struct samsung_clk_provider *__init samsung_clk_init(struct device_node *np,
+ void __iomem *base, unsigned long nr_clks)
{
- reg_base = base;
+ struct samsung_clk_provider *ctx;
+ struct clk **clk_table;
+ int ret;
+ int i;
- clk_table = kzalloc(sizeof(struct clk *) * nr_clks, GFP_KERNEL);
+ ctx = kzalloc(sizeof(struct samsung_clk_provider), GFP_KERNEL);
+ if (!ctx)
+ panic("could not allocate clock provider context.\n");
+
+ clk_table = kcalloc(nr_clks, sizeof(struct clk *), GFP_KERNEL);
if (!clk_table)
panic("could not allocate clock lookup table\n");
+ for (i = 0; i < nr_clks; ++i)
+ clk_table[i] = ERR_PTR(-ENOENT);
+
+ ctx->reg_base = base;
+ ctx->clk_data.clks = clk_table;
+ ctx->clk_data.clk_num = nr_clks;
+ spin_lock_init(&ctx->lock);
+
if (!np)
- return;
+ return ctx;
-#ifdef CONFIG_OF
- clk_data.clks = clk_table;
- clk_data.clk_num = nr_clks;
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-#endif
+ ret = of_clk_add_provider(np, of_clk_src_onecell_get,
+ &ctx->clk_data);
+ if (ret)
+ panic("could not register clock provide\n");
+
+ return ctx;
}
/* add a clock instance to the clock lookup table used for dt based lookup */
-void samsung_clk_add_lookup(struct clk *clk, unsigned int id)
+void samsung_clk_add_lookup(struct samsung_clk_provider *ctx, struct clk *clk,
+ unsigned int id)
{
- if (clk_table && id)
- clk_table[id] = clk;
+ if (ctx->clk_data.clks && id)
+ ctx->clk_data.clks[id] = clk;
}
/* register a list of aliases */
-void __init samsung_clk_register_alias(struct samsung_clock_alias *list,
- unsigned int nr_clk)
+void __init samsung_clk_register_alias(struct samsung_clk_provider *ctx,
+ struct samsung_clock_alias *list,
+ unsigned int nr_clk)
{
struct clk *clk;
unsigned int idx, ret;
- if (!clk_table) {
+ if (!ctx->clk_data.clks) {
pr_err("%s: clock table missing\n", __func__);
return;
}
continue;
}
- clk = clk_table[list->id];
+ clk = ctx->clk_data.clks[list->id];
if (!clk) {
pr_err("%s: failed to find clock %d\n", __func__,
list->id);
}
/* register a list of fixed clocks */
-void __init samsung_clk_register_fixed_rate(
+void __init samsung_clk_register_fixed_rate(struct samsung_clk_provider *ctx,
struct samsung_fixed_rate_clock *list, unsigned int nr_clk)
{
struct clk *clk;
continue;
}
- samsung_clk_add_lookup(clk, list->id);
+ samsung_clk_add_lookup(ctx, clk, list->id);
/*
* Unconditionally add a clock lookup for the fixed rate clocks.
}
/* register a list of fixed factor clocks */
-void __init samsung_clk_register_fixed_factor(
+void __init samsung_clk_register_fixed_factor(struct samsung_clk_provider *ctx,
struct samsung_fixed_factor_clock *list, unsigned int nr_clk)
{
struct clk *clk;
continue;
}
- samsung_clk_add_lookup(clk, list->id);
+ samsung_clk_add_lookup(ctx, clk, list->id);
}
}
/* register a list of mux clocks */
-void __init samsung_clk_register_mux(struct samsung_mux_clock *list,
- unsigned int nr_clk)
+void __init samsung_clk_register_mux(struct samsung_clk_provider *ctx,
+ struct samsung_mux_clock *list,
+ unsigned int nr_clk)
{
struct clk *clk;
unsigned int idx, ret;
for (idx = 0; idx < nr_clk; idx++, list++) {
clk = clk_register_mux(NULL, list->name, list->parent_names,
- list->num_parents, list->flags, reg_base + list->offset,
- list->shift, list->width, list->mux_flags, &lock);
+ list->num_parents, list->flags,
+ ctx->reg_base + list->offset,
+ list->shift, list->width, list->mux_flags, &ctx->lock);
if (IS_ERR(clk)) {
pr_err("%s: failed to register clock %s\n", __func__,
list->name);
continue;
}
- samsung_clk_add_lookup(clk, list->id);
+ samsung_clk_add_lookup(ctx, clk, list->id);
/* register a clock lookup only if a clock alias is specified */
if (list->alias) {
}
/* register a list of div clocks */
-void __init samsung_clk_register_div(struct samsung_div_clock *list,
- unsigned int nr_clk)
+void __init samsung_clk_register_div(struct samsung_clk_provider *ctx,
+ struct samsung_div_clock *list,
+ unsigned int nr_clk)
{
struct clk *clk;
unsigned int idx, ret;
for (idx = 0; idx < nr_clk; idx++, list++) {
if (list->table)
clk = clk_register_divider_table(NULL, list->name,
- list->parent_name, list->flags,
- reg_base + list->offset, list->shift,
- list->width, list->div_flags,
- list->table, &lock);
+ list->parent_name, list->flags,
+ ctx->reg_base + list->offset,
+ list->shift, list->width, list->div_flags,
+ list->table, &ctx->lock);
else
clk = clk_register_divider(NULL, list->name,
- list->parent_name, list->flags,
- reg_base + list->offset, list->shift,
- list->width, list->div_flags, &lock);
+ list->parent_name, list->flags,
+ ctx->reg_base + list->offset, list->shift,
+ list->width, list->div_flags, &ctx->lock);
if (IS_ERR(clk)) {
pr_err("%s: failed to register clock %s\n", __func__,
list->name);
continue;
}
- samsung_clk_add_lookup(clk, list->id);
+ samsung_clk_add_lookup(ctx, clk, list->id);
/* register a clock lookup only if a clock alias is specified */
if (list->alias) {
}
/* register a list of gate clocks */
-void __init samsung_clk_register_gate(struct samsung_gate_clock *list,
- unsigned int nr_clk)
+void __init samsung_clk_register_gate(struct samsung_clk_provider *ctx,
+ struct samsung_gate_clock *list,
+ unsigned int nr_clk)
{
struct clk *clk;
unsigned int idx, ret;
for (idx = 0; idx < nr_clk; idx++, list++) {
clk = clk_register_gate(NULL, list->name, list->parent_name,
- list->flags, reg_base + list->offset,
- list->bit_idx, list->gate_flags, &lock);
+ list->flags, ctx->reg_base + list->offset,
+ list->bit_idx, list->gate_flags, &ctx->lock);
if (IS_ERR(clk)) {
pr_err("%s: failed to register clock %s\n", __func__,
list->name);
__func__, list->alias);
}
- samsung_clk_add_lookup(clk, list->id);
+ samsung_clk_add_lookup(ctx, clk, list->id);
}
}
* tree and register it
*/
#ifdef CONFIG_OF
-void __init samsung_clk_of_register_fixed_ext(
+void __init samsung_clk_of_register_fixed_ext(struct samsung_clk_provider *ctx,
struct samsung_fixed_rate_clock *fixed_rate_clk,
unsigned int nr_fixed_rate_clk,
struct of_device_id *clk_matches)
{
const struct of_device_id *match;
- struct device_node *np;
+ struct device_node *clk_np;
u32 freq;
- for_each_matching_node_and_match(np, clk_matches, &match) {
- if (of_property_read_u32(np, "clock-frequency", &freq))
+ for_each_matching_node_and_match(clk_np, clk_matches, &match) {
+ if (of_property_read_u32(clk_np, "clock-frequency", &freq))
continue;
- fixed_rate_clk[(u32)match->data].fixed_rate = freq;
+ fixed_rate_clk[(unsigned long)match->data].fixed_rate = freq;
}
- samsung_clk_register_fixed_rate(fixed_rate_clk, nr_fixed_rate_clk);
+ samsung_clk_register_fixed_rate(ctx, fixed_rate_clk, nr_fixed_rate_clk);
}
#endif
#include <linux/of_address.h>
#include "clk-pll.h"
+/**
+ * struct samsung_clk_provider: information about clock provider
+ * @reg_base: virtual address for the register base.
+ * @clk_data: holds clock related data like clk* and number of clocks.
+ * @lock: maintains exclusion bwtween callbacks for a given clock-provider.
+ */
+struct samsung_clk_provider {
+ void __iomem *reg_base;
+ struct clk_onecell_data clk_data;
+ spinlock_t lock;
+};
+
/**
* struct samsung_clock_alias: information about mux clock
* @id: platform specific id of the clock.
__PLL(_typ, _id, NULL, _name, _pname, CLK_GET_RATE_NOCACHE, \
_lock, _con, _rtable, _alias)
-extern void __init samsung_clk_init(struct device_node *np, void __iomem *base,
- unsigned long nr_clks);
+extern struct samsung_clk_provider *__init samsung_clk_init(
+ struct device_node *np, void __iomem *base,
+ unsigned long nr_clks);
extern void __init samsung_clk_of_register_fixed_ext(
- struct samsung_fixed_rate_clock *fixed_rate_clk,
- unsigned int nr_fixed_rate_clk,
- struct of_device_id *clk_matches);
+ struct samsung_clk_provider *ctx,
+ struct samsung_fixed_rate_clock *fixed_rate_clk,
+ unsigned int nr_fixed_rate_clk,
+ struct of_device_id *clk_matches);
-extern void samsung_clk_add_lookup(struct clk *clk, unsigned int id);
+extern void samsung_clk_add_lookup(struct samsung_clk_provider *ctx,
+ struct clk *clk, unsigned int id);
-extern void samsung_clk_register_alias(struct samsung_clock_alias *list,
- unsigned int nr_clk);
+extern void samsung_clk_register_alias(struct samsung_clk_provider *ctx,
+ struct samsung_clock_alias *list,
+ unsigned int nr_clk);
extern void __init samsung_clk_register_fixed_rate(
- struct samsung_fixed_rate_clock *clk_list, unsigned int nr_clk);
+ struct samsung_clk_provider *ctx,
+ struct samsung_fixed_rate_clock *clk_list,
+ unsigned int nr_clk);
extern void __init samsung_clk_register_fixed_factor(
- struct samsung_fixed_factor_clock *list, unsigned int nr_clk);
-extern void __init samsung_clk_register_mux(struct samsung_mux_clock *clk_list,
- unsigned int nr_clk);
-extern void __init samsung_clk_register_div(struct samsung_div_clock *clk_list,
- unsigned int nr_clk);
-extern void __init samsung_clk_register_gate(
- struct samsung_gate_clock *clk_list, unsigned int nr_clk);
-extern void __init samsung_clk_register_pll(struct samsung_pll_clock *pll_list,
- unsigned int nr_clk, void __iomem *base);
+ struct samsung_clk_provider *ctx,
+ struct samsung_fixed_factor_clock *list,
+ unsigned int nr_clk);
+extern void __init samsung_clk_register_mux(struct samsung_clk_provider *ctx,
+ struct samsung_mux_clock *clk_list,
+ unsigned int nr_clk);
+extern void __init samsung_clk_register_div(struct samsung_clk_provider *ctx,
+ struct samsung_div_clock *clk_list,
+ unsigned int nr_clk);
+extern void __init samsung_clk_register_gate(struct samsung_clk_provider *ctx,
+ struct samsung_gate_clock *clk_list,
+ unsigned int nr_clk);
+extern void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
+ struct samsung_pll_clock *pll_list,
+ unsigned int nr_clk, void __iomem *base);
extern unsigned long _get_rate(const char *clk_name);
extern void samsung_clk_save(void __iomem *base,
- struct samsung_clk_reg_dump *rd,
- unsigned int num_regs);
+ struct samsung_clk_reg_dump *rd,
+ unsigned int num_regs);
extern void samsung_clk_restore(void __iomem *base,
- const struct samsung_clk_reg_dump *rd,
- unsigned int num_regs);
+ const struct samsung_clk_reg_dump *rd,
+ unsigned int num_regs);
extern struct samsung_clk_reg_dump *samsung_clk_alloc_reg_dump(
- const unsigned long *rdump,
- unsigned long nr_rdump);
+ const unsigned long *rdump,
+ unsigned long nr_rdump);
#endif /* __SAMSUNG_CLK_H */
static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
{
+ cfg->mpll = _clk_mpll;
(cfg->info->set_fvco)(cfg);
}
--- /dev/null
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Tomasz Figa <t.figa@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants for Samsung Exynos3250 clock controllers.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+
+/*
+ * Main CMU
+ */
+
+#define CLK_OSCSEL 1
+#define CLK_FIN_PLL 2
+#define CLK_FOUT_APLL 3
+#define CLK_FOUT_VPLL 4
+#define CLK_FOUT_UPLL 5
+#define CLK_FOUT_MPLL 6
+
+/* Muxes */
+#define CLK_MOUT_MPLL_USER_L 16
+#define CLK_MOUT_GDL 17
+#define CLK_MOUT_MPLL_USER_R 18
+#define CLK_MOUT_GDR 19
+#define CLK_MOUT_EBI 20
+#define CLK_MOUT_ACLK_200 21
+#define CLK_MOUT_ACLK_160 22
+#define CLK_MOUT_ACLK_100 23
+#define CLK_MOUT_ACLK_266_1 24
+#define CLK_MOUT_ACLK_266_0 25
+#define CLK_MOUT_ACLK_266 26
+#define CLK_MOUT_VPLL 27
+#define CLK_MOUT_EPLL_USER 28
+#define CLK_MOUT_EBI_1 29
+#define CLK_MOUT_UPLL 30
+#define CLK_MOUT_ACLK_400_MCUISP_SUB 31
+#define CLK_MOUT_MPLL 32
+#define CLK_MOUT_ACLK_400_MCUISP 33
+#define CLK_MOUT_VPLLSRC 34
+#define CLK_MOUT_CAM1 35
+#define CLK_MOUT_CAM_BLK 36
+#define CLK_MOUT_MFC 37
+#define CLK_MOUT_MFC_1 38
+#define CLK_MOUT_MFC_0 39
+#define CLK_MOUT_G3D 40
+#define CLK_MOUT_G3D_1 41
+#define CLK_MOUT_G3D_0 42
+#define CLK_MOUT_MIPI0 43
+#define CLK_MOUT_FIMD0 44
+#define CLK_MOUT_UART_ISP 45
+#define CLK_MOUT_SPI1_ISP 46
+#define CLK_MOUT_SPI0_ISP 47
+#define CLK_MOUT_TSADC 48
+#define CLK_MOUT_MMC1 49
+#define CLK_MOUT_MMC0 50
+#define CLK_MOUT_UART1 51
+#define CLK_MOUT_UART0 52
+#define CLK_MOUT_SPI1 53
+#define CLK_MOUT_SPI0 54
+#define CLK_MOUT_AUDIO 55
+#define CLK_MOUT_MPLL_USER_C 56
+#define CLK_MOUT_HPM 57
+#define CLK_MOUT_CORE 58
+#define CLK_MOUT_APLL 59
+#define CLK_MOUT_ACLK_266_SUB 60
+
+/* Dividers */
+#define CLK_DIV_GPL 64
+#define CLK_DIV_GDL 65
+#define CLK_DIV_GPR 66
+#define CLK_DIV_GDR 67
+#define CLK_DIV_MPLL_PRE 68
+#define CLK_DIV_ACLK_400_MCUISP 69
+#define CLK_DIV_EBI 70
+#define CLK_DIV_ACLK_200 71
+#define CLK_DIV_ACLK_160 72
+#define CLK_DIV_ACLK_100 73
+#define CLK_DIV_ACLK_266 74
+#define CLK_DIV_CAM1 75
+#define CLK_DIV_CAM_BLK 76
+#define CLK_DIV_MFC 77
+#define CLK_DIV_G3D 78
+#define CLK_DIV_MIPI0_PRE 79
+#define CLK_DIV_MIPI0 80
+#define CLK_DIV_FIMD0 81
+#define CLK_DIV_UART_ISP 82
+#define CLK_DIV_SPI1_ISP_PRE 83
+#define CLK_DIV_SPI1_ISP 84
+#define CLK_DIV_SPI0_ISP_PRE 85
+#define CLK_DIV_SPI0_ISP 86
+#define CLK_DIV_TSADC_PRE 87
+#define CLK_DIV_TSADC 88
+#define CLK_DIV_MMC1_PRE 89
+#define CLK_DIV_MMC1 90
+#define CLK_DIV_MMC0_PRE 91
+#define CLK_DIV_MMC0 92
+#define CLK_DIV_UART1 93
+#define CLK_DIV_UART0 94
+#define CLK_DIV_SPI1_PRE 95
+#define CLK_DIV_SPI1 96
+#define CLK_DIV_SPI0_PRE 97
+#define CLK_DIV_SPI0 98
+#define CLK_DIV_PCM 99
+#define CLK_DIV_AUDIO 100
+#define CLK_DIV_I2S 101
+#define CLK_DIV_CORE2 102
+#define CLK_DIV_APLL 103
+#define CLK_DIV_PCLK_DBG 104
+#define CLK_DIV_ATB 105
+#define CLK_DIV_COREM 106
+#define CLK_DIV_CORE 107
+#define CLK_DIV_HPM 108
+#define CLK_DIV_COPY 109
+
+/* Gates */
+#define CLK_ASYNC_G3D 128
+#define CLK_ASYNC_MFCL 129
+#define CLK_PPMULEFT 130
+#define CLK_GPIO_LEFT 131
+#define CLK_ASYNC_ISPMX 132
+#define CLK_ASYNC_FSYSD 133
+#define CLK_ASYNC_LCD0X 134
+#define CLK_ASYNC_CAMX 135
+#define CLK_PPMURIGHT 136
+#define CLK_GPIO_RIGHT 137
+#define CLK_MONOCNT 138
+#define CLK_TZPC6 139
+#define CLK_PROVISIONKEY1 140
+#define CLK_PROVISIONKEY0 141
+#define CLK_CMU_ISPPART 142
+#define CLK_TMU_APBIF 143
+#define CLK_KEYIF 144
+#define CLK_RTC 145
+#define CLK_WDT 146
+#define CLK_MCT 147
+#define CLK_SECKEY 148
+#define CLK_TZPC5 149
+#define CLK_TZPC4 150
+#define CLK_TZPC3 151
+#define CLK_TZPC2 152
+#define CLK_TZPC1 153
+#define CLK_TZPC0 154
+#define CLK_CMU_COREPART 155
+#define CLK_CMU_TOPPART 156
+#define CLK_PMU_APBIF 157
+#define CLK_SYSREG 158
+#define CLK_CHIP_ID 159
+#define CLK_QEJPEG 160
+#define CLK_PIXELASYNCM1 161
+#define CLK_PIXELASYNCM0 162
+#define CLK_PPMUCAMIF 163
+#define CLK_QEM2MSCALER 164
+#define CLK_QEGSCALER1 165
+#define CLK_QEGSCALER0 166
+#define CLK_SMMUJPEG 167
+#define CLK_SMMUM2M2SCALER 168
+#define CLK_SMMUGSCALER1 169
+#define CLK_SMMUGSCALER0 170
+#define CLK_JPEG 171
+#define CLK_M2MSCALER 172
+#define CLK_GSCALER1 173
+#define CLK_GSCALER0 174
+#define CLK_QEMFC 175
+#define CLK_PPMUMFC_L 176
+#define CLK_SMMUMFC_L 177
+#define CLK_MFC 178
+#define CLK_SMMUG3D 179
+#define CLK_QEG3D 180
+#define CLK_PPMUG3D 181
+#define CLK_G3D 182
+#define CLK_QE_CH1_LCD 183
+#define CLK_QE_CH0_LCD 184
+#define CLK_PPMULCD0 185
+#define CLK_SMMUFIMD0 186
+#define CLK_DSIM0 187
+#define CLK_FIMD0 188
+#define CLK_CAM1 189
+#define CLK_UART_ISP_TOP 190
+#define CLK_SPI1_ISP_TOP 191
+#define CLK_SPI0_ISP_TOP 192
+#define CLK_TSADC 193
+#define CLK_PPMUFILE 194
+#define CLK_USBOTG 195
+#define CLK_USBHOST 196
+#define CLK_SROMC 197
+#define CLK_SDMMC1 198
+#define CLK_SDMMC0 199
+#define CLK_PDMA1 200
+#define CLK_PDMA0 201
+#define CLK_PWM 202
+#define CLK_PCM 203
+#define CLK_I2S 204
+#define CLK_SPI1 205
+#define CLK_SPI0 206
+#define CLK_I2C7 207
+#define CLK_I2C6 208
+#define CLK_I2C5 209
+#define CLK_I2C4 210
+#define CLK_I2C3 211
+#define CLK_I2C2 212
+#define CLK_I2C1 213
+#define CLK_I2C0 214
+#define CLK_UART1 215
+#define CLK_UART0 216
+#define CLK_BLOCK_LCD 217
+#define CLK_BLOCK_G3D 218
+#define CLK_BLOCK_MFC 219
+#define CLK_BLOCK_CAM 220
+#define CLK_SMIES 221
+
+/* Special clocks */
+#define CLK_SCLK_JPEG 224
+#define CLK_SCLK_M2MSCALER 225
+#define CLK_SCLK_GSCALER1 226
+#define CLK_SCLK_GSCALER0 227
+#define CLK_SCLK_MFC 228
+#define CLK_SCLK_G3D 229
+#define CLK_SCLK_MIPIDPHY2L 230
+#define CLK_SCLK_MIPI0 231
+#define CLK_SCLK_FIMD0 232
+#define CLK_SCLK_CAM1 233
+#define CLK_SCLK_UART_ISP 234
+#define CLK_SCLK_SPI1_ISP 235
+#define CLK_SCLK_SPI0_ISP 236
+#define CLK_SCLK_UPLL 237
+#define CLK_SCLK_TSADC 238
+#define CLK_SCLK_EBI 239
+#define CLK_SCLK_MMC1 240
+#define CLK_SCLK_MMC0 241
+#define CLK_SCLK_I2S 242
+#define CLK_SCLK_PCM 243
+#define CLK_SCLK_SPI1 244
+#define CLK_SCLK_SPI0 245
+#define CLK_SCLK_UART1 246
+#define CLK_SCLK_UART0 247
+
+/*
+ * Total number of clocks of main CMU.
+ * NOTE: Must be equal to last clock ID increased by one.
+ */
+#define CLK_NR_CLKS 248
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H */
#define CLK_MOUT_MPLL_USER_C 18 /* Exynos4x12 only */
#define CLK_MOUT_CORE 19
#define CLK_MOUT_APLL 20
+#define CLK_SCLK_HDMIPHY 22
/* gate for special clocks (sclk) */
#define CLK_SCLK_FIMC0 128
#define CLK_KEYIF 347
#define CLK_AUDSS 348
#define CLK_MIPI_HSI 349 /* Exynos4210 only */
-#define CLK_MDMA2 350 /* Exynos4210 only */
#define CLK_PIXELASYNCM0 351
#define CLK_PIXELASYNCM1 352
#define CLK_FIMC_LITE0 353 /* Exynos4x12 only */
#define CLK_G2D 345
#define CLK_MDMA0 346
#define CLK_SMMU_MDMA0 347
+#define CLK_SSS 348
+#define CLK_G3D 349
/* mux clocks */
#define CLK_MOUT_HDMI 1024
+#define CLK_MOUT_GPLL 1025
/* must be greater than maximal clock id */
-#define CLK_NR_CLKS 1025
+#define CLK_NR_CLKS 1026
#endif /* _DT_BINDINGS_CLOCK_EXYNOS_5250_H */
--- /dev/null
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Rahul Sharma <rahul.sharma@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Provides Constants for Exynos5260 clocks.
+*/
+
+#ifndef _DT_BINDINGS_CLK_EXYNOS5260_H
+#define _DT_BINDINGS_CLK_EXYNOS5260_H
+
+/* Clock names: <cmu><type><IP> */
+
+/* List Of Clocks For CMU_TOP */
+
+#define TOP_FOUT_DISP_PLL 1
+#define TOP_FOUT_AUD_PLL 2
+#define TOP_MOUT_AUDTOP_PLL_USER 3
+#define TOP_MOUT_AUD_PLL 4
+#define TOP_MOUT_DISP_PLL 5
+#define TOP_MOUT_BUSTOP_PLL_USER 6
+#define TOP_MOUT_MEMTOP_PLL_USER 7
+#define TOP_MOUT_MEDIATOP_PLL_USER 8
+#define TOP_MOUT_DISP_DISP_333 9
+#define TOP_MOUT_ACLK_DISP_333 10
+#define TOP_MOUT_DISP_DISP_222 11
+#define TOP_MOUT_ACLK_DISP_222 12
+#define TOP_MOUT_DISP_MEDIA_PIXEL 13
+#define TOP_MOUT_FIMD1 14
+#define TOP_MOUT_SCLK_PERI_SPI0_CLK 15
+#define TOP_MOUT_SCLK_PERI_SPI1_CLK 16
+#define TOP_MOUT_SCLK_PERI_SPI2_CLK 17
+#define TOP_MOUT_SCLK_PERI_UART0_UCLK 18
+#define TOP_MOUT_SCLK_PERI_UART2_UCLK 19
+#define TOP_MOUT_SCLK_PERI_UART1_UCLK 20
+#define TOP_MOUT_BUS4_BUSTOP_100 21
+#define TOP_MOUT_BUS4_BUSTOP_400 22
+#define TOP_MOUT_BUS3_BUSTOP_100 23
+#define TOP_MOUT_BUS3_BUSTOP_400 24
+#define TOP_MOUT_BUS2_BUSTOP_400 25
+#define TOP_MOUT_BUS2_BUSTOP_100 26
+#define TOP_MOUT_BUS1_BUSTOP_100 27
+#define TOP_MOUT_BUS1_BUSTOP_400 28
+#define TOP_MOUT_SCLK_FSYS_USB 29
+#define TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A 30
+#define TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A 31
+#define TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A 32
+#define TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B 33
+#define TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B 34
+#define TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B 35
+#define TOP_MOUT_ACLK_ISP1_266 36
+#define TOP_MOUT_ISP1_MEDIA_266 37
+#define TOP_MOUT_ACLK_ISP1_400 38
+#define TOP_MOUT_ISP1_MEDIA_400 39
+#define TOP_MOUT_SCLK_ISP1_SPI0 40
+#define TOP_MOUT_SCLK_ISP1_SPI1 41
+#define TOP_MOUT_SCLK_ISP1_UART 42
+#define TOP_MOUT_SCLK_ISP1_SENSOR2 43
+#define TOP_MOUT_SCLK_ISP1_SENSOR1 44
+#define TOP_MOUT_SCLK_ISP1_SENSOR0 45
+#define TOP_MOUT_ACLK_MFC_333 46
+#define TOP_MOUT_MFC_BUSTOP_333 47
+#define TOP_MOUT_ACLK_G2D_333 48
+#define TOP_MOUT_G2D_BUSTOP_333 49
+#define TOP_MOUT_ACLK_GSCL_FIMC 50
+#define TOP_MOUT_GSCL_BUSTOP_FIMC 51
+#define TOP_MOUT_ACLK_GSCL_333 52
+#define TOP_MOUT_GSCL_BUSTOP_333 53
+#define TOP_MOUT_ACLK_GSCL_400 54
+#define TOP_MOUT_M2M_MEDIATOP_400 55
+#define TOP_DOUT_ACLK_MFC_333 56
+#define TOP_DOUT_ACLK_G2D_333 57
+#define TOP_DOUT_SCLK_ISP1_SENSOR2_A 58
+#define TOP_DOUT_SCLK_ISP1_SENSOR1_A 59
+#define TOP_DOUT_SCLK_ISP1_SENSOR0_A 60
+#define TOP_DOUT_ACLK_GSCL_FIMC 61
+#define TOP_DOUT_ACLK_GSCL_400 62
+#define TOP_DOUT_ACLK_GSCL_333 63
+#define TOP_DOUT_SCLK_ISP1_SPI0_B 64
+#define TOP_DOUT_SCLK_ISP1_SPI0_A 65
+#define TOP_DOUT_ACLK_ISP1_400 66
+#define TOP_DOUT_ACLK_ISP1_266 67
+#define TOP_DOUT_SCLK_ISP1_UART 68
+#define TOP_DOUT_SCLK_ISP1_SPI1_B 69
+#define TOP_DOUT_SCLK_ISP1_SPI1_A 70
+#define TOP_DOUT_SCLK_ISP1_SENSOR2_B 71
+#define TOP_DOUT_SCLK_ISP1_SENSOR1_B 72
+#define TOP_DOUT_SCLK_ISP1_SENSOR0_B 73
+#define TOP_DOUTTOP__SCLK_HPM_TARGETCLK 74
+#define TOP_DOUT_SCLK_DISP_PIXEL 75
+#define TOP_DOUT_ACLK_DISP_222 76
+#define TOP_DOUT_ACLK_DISP_333 77
+#define TOP_DOUT_ACLK_BUS4_100 78
+#define TOP_DOUT_ACLK_BUS4_400 79
+#define TOP_DOUT_ACLK_BUS3_100 80
+#define TOP_DOUT_ACLK_BUS3_400 81
+#define TOP_DOUT_ACLK_BUS2_100 82
+#define TOP_DOUT_ACLK_BUS2_400 83
+#define TOP_DOUT_ACLK_BUS1_100 84
+#define TOP_DOUT_ACLK_BUS1_400 85
+#define TOP_DOUT_SCLK_PERI_SPI1_B 86
+#define TOP_DOUT_SCLK_PERI_SPI1_A 87
+#define TOP_DOUT_SCLK_PERI_SPI0_B 88
+#define TOP_DOUT_SCLK_PERI_SPI0_A 89
+#define TOP_DOUT_SCLK_PERI_UART0 90
+#define TOP_DOUT_SCLK_PERI_UART2 91
+#define TOP_DOUT_SCLK_PERI_UART1 92
+#define TOP_DOUT_SCLK_PERI_SPI2_B 93
+#define TOP_DOUT_SCLK_PERI_SPI2_A 94
+#define TOP_DOUT_ACLK_PERI_AUD 95
+#define TOP_DOUT_ACLK_PERI_66 96
+#define TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_B 97
+#define TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_A 98
+#define TOP_DOUT_SCLK_FSYS_USBDRD30_SUSPEND_CLK 99
+#define TOP_DOUT_ACLK_FSYS_200 100
+#define TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_B 101
+#define TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_A 102
+#define TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_B 103
+#define TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_A 104
+#define TOP_SCLK_FIMD1 105
+#define TOP_SCLK_MMC2 106
+#define TOP_SCLK_MMC1 107
+#define TOP_SCLK_MMC0 108
+#define PHYCLK_DPTX_PHY_CH3_TXD_CLK 109
+#define PHYCLK_DPTX_PHY_CH2_TXD_CLK 110
+#define PHYCLK_DPTX_PHY_CH1_TXD_CLK 111
+#define PHYCLK_DPTX_PHY_CH0_TXD_CLK 112
+#define phyclk_hdmi_phy_tmds_clko 113
+#define PHYCLK_HDMI_PHY_PIXEL_CLKO 114
+#define PHYCLK_HDMI_LINK_O_TMDS_CLKHI 115
+#define PHYCLK_MIPI_DPHY_4L_M_TXBYTECLKHS 116
+#define PHYCLK_DPTX_PHY_O_REF_CLK_24M 117
+#define PHYCLK_DPTX_PHY_CLK_DIV2 118
+#define PHYCLK_MIPI_DPHY_4L_M_RXCLKESC0 119
+#define PHYCLK_USBHOST20_PHY_PHYCLOCK 120
+#define PHYCLK_USBHOST20_PHY_FREECLK 121
+#define PHYCLK_USBHOST20_PHY_CLK48MOHCI 122
+#define PHYCLK_USBDRD30_UDRD30_PIPE_PCLK 123
+#define PHYCLK_USBDRD30_UDRD30_PHYCLOCK 124
+#define TOP_NR_CLK 125
+
+
+/* List Of Clocks For CMU_EGL */
+
+#define EGL_FOUT_EGL_PLL 1
+#define EGL_FOUT_EGL_DPLL 2
+#define EGL_MOUT_EGL_B 3
+#define EGL_MOUT_EGL_PLL 4
+#define EGL_DOUT_EGL_PLL 5
+#define EGL_DOUT_EGL_PCLK_DBG 6
+#define EGL_DOUT_EGL_ATCLK 7
+#define EGL_DOUT_PCLK_EGL 8
+#define EGL_DOUT_ACLK_EGL 9
+#define EGL_DOUT_EGL2 10
+#define EGL_DOUT_EGL1 11
+#define EGL_NR_CLK 12
+
+
+/* List Of Clocks For CMU_KFC */
+
+#define KFC_FOUT_KFC_PLL 1
+#define KFC_MOUT_KFC_PLL 2
+#define KFC_MOUT_KFC 3
+#define KFC_DOUT_KFC_PLL 4
+#define KFC_DOUT_PCLK_KFC 5
+#define KFC_DOUT_ACLK_KFC 6
+#define KFC_DOUT_KFC_PCLK_DBG 7
+#define KFC_DOUT_KFC_ATCLK 8
+#define KFC_DOUT_KFC2 9
+#define KFC_DOUT_KFC1 10
+#define KFC_NR_CLK 11
+
+
+/* List Of Clocks For CMU_MIF */
+
+#define MIF_FOUT_MEM_PLL 1
+#define MIF_FOUT_MEDIA_PLL 2
+#define MIF_FOUT_BUS_PLL 3
+#define MIF_MOUT_CLK2X_PHY 4
+#define MIF_MOUT_MIF_DREX2X 5
+#define MIF_MOUT_CLKM_PHY 6
+#define MIF_MOUT_MIF_DREX 7
+#define MIF_MOUT_MEDIA_PLL 8
+#define MIF_MOUT_BUS_PLL 9
+#define MIF_MOUT_MEM_PLL 10
+#define MIF_DOUT_ACLK_BUS_100 11
+#define MIF_DOUT_ACLK_BUS_200 12
+#define MIF_DOUT_ACLK_MIF_466 13
+#define MIF_DOUT_CLK2X_PHY 14
+#define MIF_DOUT_CLKM_PHY 15
+#define MIF_DOUT_BUS_PLL 16
+#define MIF_DOUT_MEM_PLL 17
+#define MIF_DOUT_MEDIA_PLL 18
+#define MIF_CLK_LPDDR3PHY_WRAP1 19
+#define MIF_CLK_LPDDR3PHY_WRAP0 20
+#define MIF_CLK_MONOCNT 21
+#define MIF_CLK_MIF_RTC 22
+#define MIF_CLK_DREX1 23
+#define MIF_CLK_DREX0 24
+#define MIF_CLK_INTMEM 25
+#define MIF_SCLK_LPDDR3PHY_WRAP_U1 26
+#define MIF_SCLK_LPDDR3PHY_WRAP_U0 27
+#define MIF_NR_CLK 28
+
+
+/* List Of Clocks For CMU_G3D */
+
+#define G3D_FOUT_G3D_PLL 1
+#define G3D_MOUT_G3D_PLL 2
+#define G3D_DOUT_PCLK_G3D 3
+#define G3D_DOUT_ACLK_G3D 4
+#define G3D_CLK_G3D_HPM 5
+#define G3D_CLK_G3D 6
+#define G3D_NR_CLK 7
+
+
+/* List Of Clocks For CMU_AUD */
+
+#define AUD_MOUT_SCLK_AUD_PCM 1
+#define AUD_MOUT_SCLK_AUD_I2S 2
+#define AUD_MOUT_AUD_PLL_USER 3
+#define AUD_DOUT_ACLK_AUD_131 4
+#define AUD_DOUT_SCLK_AUD_UART 5
+#define AUD_DOUT_SCLK_AUD_PCM 6
+#define AUD_DOUT_SCLK_AUD_I2S 7
+#define AUD_CLK_AUD_UART 8
+#define AUD_CLK_PCM 9
+#define AUD_CLK_I2S 10
+#define AUD_CLK_DMAC 11
+#define AUD_CLK_SRAMC 12
+#define AUD_SCLK_AUD_UART 13
+#define AUD_SCLK_PCM 14
+#define AUD_SCLK_I2S 15
+#define AUD_NR_CLK 16
+
+
+/* List Of Clocks For CMU_MFC */
+
+#define MFC_MOUT_ACLK_MFC_333_USER 1
+#define MFC_DOUT_PCLK_MFC_83 2
+#define MFC_CLK_MFC 3
+#define MFC_CLK_SMMU2_MFCM1 4
+#define MFC_CLK_SMMU2_MFCM0 5
+#define MFC_NR_CLK 6
+
+
+/* List Of Clocks For CMU_GSCL */
+
+#define GSCL_MOUT_ACLK_CSIS 1
+#define GSCL_MOUT_ACLK_GSCL_FIMC_USER 2
+#define GSCL_MOUT_ACLK_M2M_400_USER 3
+#define GSCL_MOUT_ACLK_GSCL_333_USER 4
+#define GSCL_DOUT_ACLK_CSIS_200 5
+#define GSCL_DOUT_PCLK_M2M_100 6
+#define GSCL_CLK_PIXEL_GSCL1 7
+#define GSCL_CLK_PIXEL_GSCL0 8
+#define GSCL_CLK_MSCL1 9
+#define GSCL_CLK_MSCL0 10
+#define GSCL_CLK_GSCL1 11
+#define GSCL_CLK_GSCL0 12
+#define GSCL_CLK_FIMC_LITE_D 13
+#define GSCL_CLK_FIMC_LITE_B 14
+#define GSCL_CLK_FIMC_LITE_A 15
+#define GSCL_CLK_CSIS1 16
+#define GSCL_CLK_CSIS0 17
+#define GSCL_CLK_SMMU3_LITE_D 18
+#define GSCL_CLK_SMMU3_LITE_B 19
+#define GSCL_CLK_SMMU3_LITE_A 20
+#define GSCL_CLK_SMMU3_GSCL0 21
+#define GSCL_CLK_SMMU3_GSCL1 22
+#define GSCL_CLK_SMMU3_MSCL0 23
+#define GSCL_CLK_SMMU3_MSCL1 24
+#define GSCL_SCLK_CSIS1_WRAP 25
+#define GSCL_SCLK_CSIS0_WRAP 26
+#define GSCL_NR_CLK 27
+
+
+/* List Of Clocks For CMU_FSYS */
+
+#define FSYS_MOUT_PHYCLK_USBHOST20_PHYCLK_USER 1
+#define FSYS_MOUT_PHYCLK_USBHOST20_FREECLK_USER 2
+#define FSYS_MOUT_PHYCLK_USBHOST20_CLK48MOHCI_USER 3
+#define FSYS_MOUT_PHYCLK_USBDRD30_PIPE_PCLK_USER 4
+#define FSYS_MOUT_PHYCLK_USBDRD30_PHYCLOCK_USER 5
+#define FSYS_CLK_TSI 6
+#define FSYS_CLK_USBLINK 7
+#define FSYS_CLK_USBHOST20 8
+#define FSYS_CLK_USBDRD30 9
+#define FSYS_CLK_SROMC 10
+#define FSYS_CLK_PDMA 11
+#define FSYS_CLK_MMC2 12
+#define FSYS_CLK_MMC1 13
+#define FSYS_CLK_MMC0 14
+#define FSYS_CLK_RTIC 15
+#define FSYS_CLK_SMMU_RTIC 16
+#define FSYS_PHYCLK_USBDRD30 17
+#define FSYS_PHYCLK_USBHOST20 18
+#define FSYS_NR_CLK 19
+
+
+/* List Of Clocks For CMU_PERI */
+
+#define PERI_MOUT_SCLK_SPDIF 1
+#define PERI_MOUT_SCLK_I2SCOD 2
+#define PERI_MOUT_SCLK_PCM 3
+#define PERI_DOUT_I2S 4
+#define PERI_DOUT_PCM 5
+#define PERI_CLK_WDT_KFC 6
+#define PERI_CLK_WDT_EGL 7
+#define PERI_CLK_HSIC3 8
+#define PERI_CLK_HSIC2 9
+#define PERI_CLK_HSIC1 10
+#define PERI_CLK_HSIC0 11
+#define PERI_CLK_PCM 12
+#define PERI_CLK_MCT 13
+#define PERI_CLK_I2S 14
+#define PERI_CLK_I2CHDMI 15
+#define PERI_CLK_I2C7 16
+#define PERI_CLK_I2C6 17
+#define PERI_CLK_I2C5 18
+#define PERI_CLK_I2C4 19
+#define PERI_CLK_I2C9 20
+#define PERI_CLK_I2C8 21
+#define PERI_CLK_I2C11 22
+#define PERI_CLK_I2C10 23
+#define PERI_CLK_HDMICEC 24
+#define PERI_CLK_EFUSE_WRITER 25
+#define PERI_CLK_ABB 26
+#define PERI_CLK_UART2 27
+#define PERI_CLK_UART1 28
+#define PERI_CLK_UART0 29
+#define PERI_CLK_ADC 30
+#define PERI_CLK_TMU4 31
+#define PERI_CLK_TMU3 32
+#define PERI_CLK_TMU2 33
+#define PERI_CLK_TMU1 34
+#define PERI_CLK_TMU0 35
+#define PERI_CLK_SPI2 36
+#define PERI_CLK_SPI1 37
+#define PERI_CLK_SPI0 38
+#define PERI_CLK_SPDIF 39
+#define PERI_CLK_PWM 40
+#define PERI_CLK_UART4 41
+#define PERI_CLK_CHIPID 42
+#define PERI_CLK_PROVKEY0 43
+#define PERI_CLK_PROVKEY1 44
+#define PERI_CLK_SECKEY 45
+#define PERI_CLK_TOP_RTC 46
+#define PERI_CLK_TZPC10 47
+#define PERI_CLK_TZPC9 48
+#define PERI_CLK_TZPC8 49
+#define PERI_CLK_TZPC7 50
+#define PERI_CLK_TZPC6 51
+#define PERI_CLK_TZPC5 52
+#define PERI_CLK_TZPC4 53
+#define PERI_CLK_TZPC3 54
+#define PERI_CLK_TZPC2 55
+#define PERI_CLK_TZPC1 56
+#define PERI_CLK_TZPC0 57
+#define PERI_SCLK_UART2 58
+#define PERI_SCLK_UART1 59
+#define PERI_SCLK_UART0 60
+#define PERI_SCLK_SPI2 61
+#define PERI_SCLK_SPI1 62
+#define PERI_SCLK_SPI0 63
+#define PERI_SCLK_SPDIF 64
+#define PERI_SCLK_I2S 65
+#define PERI_SCLK_PCM1 66
+#define PERI_NR_CLK 67
+
+
+/* List Of Clocks For CMU_DISP */
+
+#define DISP_MOUT_SCLK_HDMI_SPDIF 1
+#define DISP_MOUT_SCLK_HDMI_PIXEL 2
+#define DISP_MOUT_PHYCLK_MIPI_DPHY_4LMRXCLK_ESC0_USER 3
+#define DISP_MOUT_PHYCLK_HDMI_PHY_TMDS_CLKO_USER 4
+#define DISP_MOUT_PHYCLK_HDMI_PHY_REF_CLKO_USER 5
+#define DISP_MOUT_HDMI_PHY_PIXEL 6
+#define DISP_MOUT_PHYCLK_HDMI_LINK_O_TMDS_CLKHI_USER 7
+#define DISP_MOUT_PHYCLK_MIPI_DPHY_4L_M_TXBYTE_CLKHS 8
+#define DISP_MOUT_PHYCLK_DPTX_PHY_O_REF_CLK_24M_USER 9
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CLK_DIV2_USER 10
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH3_TXD_CLK_USER 11
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH2_TXD_CLK_USER 12
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH1_TXD_CLK_USER 13
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH0_TXD_CLK_USER 14
+#define DISP_MOUT_ACLK_DISP_222_USER 15
+#define DISP_MOUT_SCLK_DISP_PIXEL_USER 16
+#define DISP_MOUT_ACLK_DISP_333_USER 17
+#define DISP_DOUT_SCLK_HDMI_PHY_PIXEL_CLKI 18
+#define DISP_DOUT_SCLK_FIMD1_EXTCLKPLL 19
+#define DISP_DOUT_PCLK_DISP_111 20
+#define DISP_CLK_SMMU_TV 21
+#define DISP_CLK_SMMU_FIMD1M1 22
+#define DISP_CLK_SMMU_FIMD1M0 23
+#define DISP_CLK_PIXEL_MIXER 24
+#define DISP_CLK_PIXEL_DISP 25
+#define DISP_CLK_MIXER 26
+#define DISP_CLK_MIPIPHY 27
+#define DISP_CLK_HDMIPHY 28
+#define DISP_CLK_HDMI 29
+#define DISP_CLK_FIMD1 30
+#define DISP_CLK_DSIM1 31
+#define DISP_CLK_DPPHY 32
+#define DISP_CLK_DP 33
+#define DISP_SCLK_PIXEL 34
+#define DISP_MOUT_HDMI_PHY_PIXEL_USER 35
+#define DISP_NR_CLK 36
+
+
+/* List Of Clocks For CMU_G2D */
+
+#define G2D_MOUT_ACLK_G2D_333_USER 1
+#define G2D_DOUT_PCLK_G2D_83 2
+#define G2D_CLK_SMMU3_JPEG 3
+#define G2D_CLK_MDMA 4
+#define G2D_CLK_JPEG 5
+#define G2D_CLK_G2D 6
+#define G2D_CLK_SSS 7
+#define G2D_CLK_SLIM_SSS 8
+#define G2D_CLK_SMMU_SLIM_SSS 9
+#define G2D_CLK_SMMU_SSS 10
+#define G2D_CLK_SMMU_MDMA 11
+#define G2D_CLK_SMMU3_G2D 12
+#define G2D_NR_CLK 13
+
+
+/* List Of Clocks For CMU_ISP */
+
+#define ISP_MOUT_ISP_400_USER 1
+#define ISP_MOUT_ISP_266_USER 2
+#define ISP_DOUT_SCLK_MPWM 3
+#define ISP_DOUT_CA5_PCLKDBG 4
+#define ISP_DOUT_CA5_ATCLKIN 5
+#define ISP_DOUT_PCLK_ISP_133 6
+#define ISP_DOUT_PCLK_ISP_66 7
+#define ISP_CLK_GIC 8
+#define ISP_CLK_WDT 9
+#define ISP_CLK_UART 10
+#define ISP_CLK_SPI1 11
+#define ISP_CLK_SPI0 12
+#define ISP_CLK_SMMU_SCALERP 13
+#define ISP_CLK_SMMU_SCALERC 14
+#define ISP_CLK_SMMU_ISPCX 15
+#define ISP_CLK_SMMU_ISP 16
+#define ISP_CLK_SMMU_FD 17
+#define ISP_CLK_SMMU_DRC 18
+#define ISP_CLK_PWM 19
+#define ISP_CLK_MTCADC 20
+#define ISP_CLK_MPWM 21
+#define ISP_CLK_MCUCTL 22
+#define ISP_CLK_I2C1 23
+#define ISP_CLK_I2C0 24
+#define ISP_CLK_FIMC_SCALERP 25
+#define ISP_CLK_FIMC_SCALERC 26
+#define ISP_CLK_FIMC 27
+#define ISP_CLK_FIMC_FD 28
+#define ISP_CLK_FIMC_DRC 29
+#define ISP_CLK_CA5 30
+#define ISP_SCLK_SPI0_EXT 31
+#define ISP_SCLK_SPI1_EXT 32
+#define ISP_SCLK_UART_EXT 33
+#define ISP_NR_CLK 34
+
+#endif
#define CLK_SCLK_GSCL_WA 156
#define CLK_SCLK_GSCL_WB 157
#define CLK_SCLK_HDMIPHY 158
+#define CLK_MAU_EPLL 159
+#define CLK_SCLK_HSIC_12M 160
+#define CLK_SCLK_MPHY_IXTAL24 161
/* gate clocks */
#define CLK_ACLK66_PERIC 256
#define CLK_I2C1 262
#define CLK_I2C2 263
#define CLK_I2C3 264
-#define CLK_I2C4 265
-#define CLK_I2C5 266
-#define CLK_I2C6 267
-#define CLK_I2C7 268
+#define CLK_USI0 265
+#define CLK_USI1 266
+#define CLK_USI2 267
+#define CLK_USI3 268
#define CLK_I2C_HDMI 269
#define CLK_TSADC 270
#define CLK_SPI0 271
#define CLK_PCM2 278
#define CLK_PWM 279
#define CLK_SPDIF 280
-#define CLK_I2C8 281
-#define CLK_I2C9 282
-#define CLK_I2C10 283
+#define CLK_USI4 281
+#define CLK_USI5 282
+#define CLK_USI6 283
#define CLK_ACLK66_PSGEN 300
#define CLK_CHIPID 301
#define CLK_SYSREG 302
#define CLK_HDMI 413
#define CLK_ACLK300_DISP1 420
#define CLK_FIMD1 421
-#define CLK_SMMU_FIMD1 422
+#define CLK_SMMU_FIMD1M0 422
+#define CLK_SMMU_FIMD1M1 423
#define CLK_ACLK166 430
#define CLK_MIXER 431
#define CLK_ACLK266 440
#define CLK_JPEG 451
#define CLK_JPEG2 452
#define CLK_SMMU_JPEG 453
+#define CLK_SMMU_JPEG2 454
#define CLK_ACLK300_GSCL 460
#define CLK_SMMU_GSCL0 461
#define CLK_SMMU_GSCL1 462
#define CLK_GSCL_WB 464
#define CLK_GSCL0 465
#define CLK_GSCL1 466
-#define CLK_CLK_3AA 467
+#define CLK_FIMC_3AA 467
#define CLK_ACLK266_G2D 470
#define CLK_SSS 471
#define CLK_SLIM_SSS 472
#define CLK_SMMU_FIMCL1 493
#define CLK_SMMU_FIMCL3 494
#define CLK_FIMC_LITE3 495
+#define CLK_FIMC_LITE0 496
+#define CLK_FIMC_LITE1 497
#define CLK_ACLK_G3D 500
#define CLK_G3D 501
#define CLK_SMMU_MIXER 502
+#define CLK_SMMU_G2D 503
+#define CLK_SMMU_MDMA0 504
+#define CLK_MC 505
+#define CLK_TOP_RTC 506
+#define CLK_SCLK_UART_ISP 510
+#define CLK_SCLK_SPI0_ISP 511
+#define CLK_SCLK_SPI1_ISP 512
+#define CLK_SCLK_PWM_ISP 513
+#define CLK_SCLK_ISP_SENSOR0 514
+#define CLK_SCLK_ISP_SENSOR1 515
+#define CLK_SCLK_ISP_SENSOR2 516
+#define CLK_ACLK432_SCALER 517
+#define CLK_ACLK432_CAM 518
+#define CLK_ACLK_FL1550_CAM 519
+#define CLK_ACLK550_CAM 520
/* mux clocks */
#define CLK_MOUT_HDMI 640
+#define CLK_MOUT_G3D 641
+#define CLK_MOUT_VPLL 642
+#define CLK_MOUT_MAUDIO0 643
/* divider clocks */
#define CLK_DOUT_PIXEL 768
--- /dev/null
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clock controllers of Samsung S3C2410 and later.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+
+/* id 1 is reserved */
+#define MPLL 2
+#define UPLL 3
+#define FCLK 4
+#define HCLK 5
+#define PCLK 6
+#define UCLK 7
+#define ARMCLK 8
+
+/* pclk-gates */
+#define PCLK_UART0 16
+#define PCLK_UART1 17
+#define PCLK_UART2 18
+#define PCLK_I2C 19
+#define PCLK_SDI 20
+#define PCLK_SPI 21
+#define PCLK_ADC 22
+#define PCLK_AC97 23
+#define PCLK_I2S 24
+#define PCLK_PWM 25
+#define PCLK_RTC 26
+#define PCLK_GPIO 27
+
+
+/* hclk-gates */
+#define HCLK_LCD 32
+#define HCLK_USBH 33
+#define HCLK_USBD 34
+#define HCLK_NAND 35
+#define HCLK_CAM 36
+
+
+#define CAMIF 40
+
+
+/* Total number of clocks. */
+#define NR_CLKS (CAMIF + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */
--- /dev/null
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clock controllers of Samsung S3C2412.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+
+/* id 1 is reserved */
+#define MPLL 2
+#define UPLL 3
+#define MDIVCLK 4
+#define MSYSCLK 5
+#define USYSCLK 6
+#define HCLK 7
+#define PCLK 8
+#define ARMDIV 9
+#define ARMCLK 10
+
+
+/* Special clocks */
+#define SCLK_CAM 16
+#define SCLK_UART 17
+#define SCLK_I2S 18
+#define SCLK_USBD 19
+#define SCLK_USBH 20
+
+/* pclk-gates */
+#define PCLK_WDT 32
+#define PCLK_SPI 33
+#define PCLK_I2S 34
+#define PCLK_I2C 35
+#define PCLK_ADC 36
+#define PCLK_RTC 37
+#define PCLK_GPIO 38
+#define PCLK_UART2 39
+#define PCLK_UART1 40
+#define PCLK_UART0 41
+#define PCLK_SDI 42
+#define PCLK_PWM 43
+#define PCLK_USBD 44
+
+/* hclk-gates */
+#define HCLK_HALF 48
+#define HCLK_X2 49
+#define HCLK_SDRAM 50
+#define HCLK_USBH 51
+#define HCLK_LCD 52
+#define HCLK_NAND 53
+#define HCLK_DMA3 54
+#define HCLK_DMA2 55
+#define HCLK_DMA1 56
+#define HCLK_DMA0 57
+
+/* Total number of clocks. */
+#define NR_CLKS (HCLK_DMA0 + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H */
--- /dev/null
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clock controllers of Samsung S3C2443 and later.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+#define MSYSCLK 1
+#define ESYSCLK 2
+#define ARMDIV 3
+#define ARMCLK 4
+#define HCLK 5
+#define PCLK 6
+
+/* Special clocks */
+#define SCLK_HSSPI0 16
+#define SCLK_FIMD 17
+#define SCLK_I2S0 18
+#define SCLK_I2S1 19
+#define SCLK_HSMMC1 20
+#define SCLK_HSMMC_EXT 21
+#define SCLK_CAM 22
+#define SCLK_UART 23
+#define SCLK_USBH 24
+
+/* Muxes */
+#define MUX_HSSPI0 32
+#define MUX_HSSPI1 33
+#define MUX_HSMMC0 34
+#define MUX_HSMMC1 35
+
+/* hclk-gates */
+#define HCLK_DMA0 48
+#define HCLK_DMA1 49
+#define HCLK_DMA2 50
+#define HCLK_DMA3 51
+#define HCLK_DMA4 52
+#define HCLK_DMA5 53
+#define HCLK_DMA6 54
+#define HCLK_DMA7 55
+#define HCLK_CAM 56
+#define HCLK_LCD 57
+#define HCLK_USBH 58
+#define HCLK_USBD 59
+#define HCLK_IROM 60
+#define HCLK_HSMMC0 61
+#define HCLK_HSMMC1 62
+#define HCLK_CFC 63
+#define HCLK_SSMC 64
+#define HCLK_DRAM 65
+#define HCLK_2D 66
+
+/* pclk-gates */
+#define PCLK_UART0 72
+#define PCLK_UART1 73
+#define PCLK_UART2 74
+#define PCLK_UART3 75
+#define PCLK_I2C0 76
+#define PCLK_SDI 77
+#define PCLK_SPI0 78
+#define PCLK_ADC 79
+#define PCLK_AC97 80
+#define PCLK_I2S0 81
+#define PCLK_PWM 82
+#define PCLK_WDT 83
+#define PCLK_RTC 84
+#define PCLK_GPIO 85
+#define PCLK_SPI1 86
+#define PCLK_CHIPID 87
+#define PCLK_I2C1 88
+#define PCLK_I2S1 89
+#define PCLK_PCM 90
+
+/* Total number of clocks. */
+#define NR_CLKS (PCLK_PCM + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */
projects / karo-tx-linux.git / commitdiff