staging: dgap: Fix trailing whitespace in dgap_fep5.h

This patch fixed trailing whitespace found by checkpatch.pl
in staging/dgap/dgap_fep5.h

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Lidza Louina <Lidza.Louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/dgap/dgap_fep5.h b/drivers/staging/dgap/dgap_fep5.h
index c9abc406a1e0cb5fe23f5b074e7f91607279d0b5..d0650ae2dd51f81beadb92b348a0b814fa519ddd 100644 (file)
--- a/drivers/staging/dgap/dgap_fep5.h
+++ b/drivers/staging/dgap/dgap_fep5.h
@@ -18,7 +18,7 @@
  *
  *     NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!!
  *
- ************************************************************************ 
+ ************************************************************************
  ***   FEP Version 5 dependent definitions
  ************************************************************************/
 
@@ -31,7 +31,7 @@
 #define START           0x0004L         /* Execution start address      */
 
 #define CMDBUF          0x0d10L         /* Command (cm_t) structure offset */
-#define CMDSTART        0x0400L         /* Start of command buffer      */   
+#define CMDSTART        0x0400L         /* Start of command buffer      */
 #define CMDMAX          0x0800L         /* End of command buffer        */
 
 #define EVBUF           0x0d18L         /* Event (ev_t) structure       */
@@ -51,7 +51,7 @@
 #define FEPSTAT         POSTAREA        /* OS here when FEP comes up    */
 #define NCHAN           0x0C02L         /* number of ports FEP sees     */
 #define PANIC           0x0C10L         /* PANIC area for FEP           */
-#define KMEMEM          0x0C30L         /* Memory for KME use           */   
+#define KMEMEM          0x0C30L         /* Memory for KME use           */
 #define CONFIG          0x0CD0L         /* Concentrator configuration info */
 #define CONFIGSIZE      0x0030          /* configuration info size      */
 #define DOWNREQ         0x0D00          /* Download request buffer pointer */
@@ -67,8 +67,8 @@
                                 */
 
 #define FEPCLR      0x00
-#define FEPMEM      0x02 
-#define FEPRST      0x04 
+#define FEPMEM      0x02
+#define FEPRST      0x04
 #define FEPINT      0x08
 #define FEPMASK     0x0e
 #define FEPWIN      0x80
@@ -79,13 +79,13 @@
 #define FEPTIMEOUT 200000
 
 #define ENABLE_INTR            0x0e04          /* Enable interrupts flag */
-#define FEPPOLL_MIN            1               /* minimum of 1 millisecond */  
+#define FEPPOLL_MIN            1               /* minimum of 1 millisecond */
 #define FEPPOLL_MAX            20              /* maximum of 20 milliseconds */
-#define FEPPOLL                        0x0c26          /* Fep event poll interval */   
+#define FEPPOLL                        0x0c26          /* Fep event poll interval */
 
 #define        IALTPIN                 0x0080          /* Input flag to swap DSR <-> DCD */
 
-/************************************************************************ 
+/************************************************************************
  * Command structure definition.
  ************************************************************************/
 struct cm_t {
@@ -119,13 +119,13 @@ struct downld_t {
        uchar   dl_data[1024];          /* Download data                */
 };
 
-/************************************************************************ 
+/************************************************************************
  * Per channel buffer structure
  ************************************************************************
- *              Base Structure Entries Usage Meanings to Host           * 
- *                                                                      * 
- *        W = read write        R = read only                           * 
- *        C = changed by commands only                                  * 
+ *              Base Structure Entries Usage Meanings to Host           *
+ *                                                                      *
+ *        W = read write        R = read only                           *
+ *        C = changed by commands only                                  *
  *        U = unknown (may be changed w/o notice)                       *
  ************************************************************************/
 struct bs_t {
@@ -138,7 +138,7 @@ struct bs_t {
        volatile unsigned short  tx_head;       /* W  Tx buffer head offset     */
        volatile unsigned short  tx_tail;       /* R  Tx buffer tail offset     */
        volatile unsigned short  tx_max;        /* W  Tx buffer size - 1         */
- 
+
        volatile unsigned short  rx_seg;        /* W  Rx segment                */
        volatile unsigned short  rx_head;       /* W  Rx buffer head offset     */
        volatile unsigned short  rx_tail;       /* R  Rx buffer tail offset     */
@@ -179,7 +179,7 @@ struct bs_t {
 
        volatile unsigned char   mtran;         /* C   Unreported modem trans   */
        volatile unsigned char   orun;          /* C   Buffer overrun occurred  */
-       volatile unsigned char   astartc;       /* W   Auxiliary Xon char       */  
+       volatile unsigned char   astartc;       /* W   Auxiliary Xon char       */
        volatile unsigned char   astopc;        /* W   Auxiliary Xoff char      */
        volatile unsigned char   startc;        /* W   Xon character             */
        volatile unsigned char   stopc;         /* W   Xoff character           */
@@ -190,13 +190,13 @@ struct bs_t {
        volatile unsigned char   ochar;         /* U   Saved output character   */
        volatile unsigned char   omask;         /* U   Output character mask    */
 
-       volatile unsigned char   bfill[13];     /* U   Reserved for expansion   */  
+       volatile unsigned char   bfill[13];     /* U   Reserved for expansion   */
 
        volatile unsigned char   scc[16];       /* U   SCC registers            */
 };
 
 
-/************************************************************************   
+/************************************************************************
  * FEP supported functions
  ************************************************************************/
 #define SRLOW          0xe0            /* Set receive low water        */
@@ -207,12 +207,12 @@ struct bs_t {
 #define SMINT          0xe5            /* Set Modem Interrupt          */
 #define SAFLOWC                0xe6            /* Set Aux. flow control chars  */
 #define SBREAK         0xe8            /* Send break                   */
-#define SMODEM         0xe9            /* Set 8530 modem control lines */  
+#define SMODEM         0xe9            /* Set 8530 modem control lines */
 #define SIFLAG         0xea            /* Set UNIX iflags              */
 #define SFLOWC         0xeb            /* Set flow control characters  */
 #define STLOW          0xec            /* Set transmit low water mark  */
 #define RPAUSE         0xee            /* Pause receive                */
-#define RRESUME                0xef            /* Resume receive               */  
+#define RRESUME                0xef            /* Resume receive               */
 #define CHRESET                0xf0            /* Reset Channel                */
 #define BUFSETALL      0xf2            /* Set Tx & Rx buffer size avail*/
 #define SOFLAG         0xf3            /* Set UNIX oflags              */
@@ -223,23 +223,23 @@ struct bs_t {
 #define SCOMMODE       0xfd            /* Set RS232/422 mode           */
 
 
-/************************************************************************ 
+/************************************************************************
  *     Modes for SCOMMODE
  ************************************************************************/
 #define MODE_232       0x00
 #define MODE_422       0x01
 
 
-/************************************************************************ 
+/************************************************************************
  *      Event flags.
  ************************************************************************/
-#define IFBREAK         0x01            /* Break received               */  
+#define IFBREAK         0x01            /* Break received               */
 #define IFTLW           0x02            /* Transmit low water           */
 #define IFTEM           0x04            /* Transmitter empty            */
 #define IFDATA          0x08            /* Receive data present         */
 #define IFMODEM         0x20            /* Modem status change          */
 
-/************************************************************************   
+/************************************************************************
  *      Modem flags
  ************************************************************************/
 #       define  DM_RTS          0x02    /* Request to send              */