]> git.karo-electronics.de Git - mv-sheeva.git/commitdiff
xhci: Disable MSI for some Fresco Logic hosts.
authorSarah Sharp <sarah.a.sharp@linux.intel.com>
Thu, 2 Jun 2011 18:33:02 +0000 (11:33 -0700)
committerSarah Sharp <sarah.a.sharp@linux.intel.com>
Fri, 3 Jun 2011 01:22:58 +0000 (18:22 -0700)
Some Fresco Logic hosts, including those found in the AUAU N533V laptop,
advertise MSI, but fail to actually generate MSI interrupts.  Add a new
xHCI quirk to skip MSI enabling for the Fresco Logic host controllers.
Fresco Logic confirms that all chips with PCI vendor ID 0x1b73 and device
ID 0x1000, regardless of PCI revision ID, do not support MSI.

This should be backported to stable kernels as far back as 2.6.36, which
was the first kernel to support MSI on xHCI hosts.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Sergey Galanov <sergey.e.galanov@gmail.com>
Cc: stable@kernel.org
drivers/usb/host/xhci-pci.c
drivers/usb/host/xhci.c
drivers/usb/host/xhci.h

index c408e9f6a707a51f396b94554e3d07970d29fe84..17541d09eabbc9b867c5be1dcdeba349b45bfa82 100644 (file)
@@ -106,12 +106,22 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 
        /* Look for vendor-specific quirks */
        if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
-                       pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
-                       pdev->revision == 0x0) {
+                       pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
+               if (pdev->revision == 0x0) {
                        xhci->quirks |= XHCI_RESET_EP_QUIRK;
                        xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
                                        " endpoint cmd after reset endpoint\n");
+               }
+               /* Fresco Logic confirms: all revisions of this chip do not
+                * support MSI, even though some of them claim to in their PCI
+                * capabilities.
+                */
+               xhci->quirks |= XHCI_BROKEN_MSI;
+               xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
+                               "has broken MSI implementation\n",
+                               pdev->revision);
        }
+
        if (pdev->vendor == PCI_VENDOR_ID_NEC)
                xhci->quirks |= XHCI_NEC_HOST;
 
index 66f3e41bba5205c5765ed52611112313b3a8f28d..06e7023258d0f4e3e4b603d6c2ae68b1fbd38f4f 100644 (file)
@@ -430,12 +430,19 @@ int xhci_run(struct usb_hcd *hcd)
                free_irq(hcd->irq, hcd);
        hcd->irq = -1;
 
+       /* Some Fresco Logic host controllers advertise MSI, but fail to
+        * generate interrupts.  Don't even try to enable MSI.
+        */
+       if (xhci->quirks & XHCI_BROKEN_MSI)
+               goto legacy_irq;
+
        ret = xhci_setup_msix(xhci);
        if (ret)
                /* fall back to msi*/
                ret = xhci_setup_msi(xhci);
 
        if (ret) {
+legacy_irq:
                /* fall back to legacy interrupt*/
                ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
                                        hcd->irq_descr, hcd);
index bbc1d9afb49cf1ca62512bd912865c5caea6f8e4..7d1ea3bf5e1fa0187210f6c89ad87a9f53f1f8e2 100644 (file)
@@ -1307,6 +1307,7 @@ struct xhci_hcd {
  * commands.
  */
 #define XHCI_EP_LIMIT_QUIRK    (1 << 5)
+#define XHCI_BROKEN_MSI                (1 << 6)
        unsigned int            num_active_eps;
        unsigned int            limit_active_eps;
        /* There are two roothubs to keep track of bus suspend info for */