deferred_error_interrupt_enable(c);
}
+int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr)
+{
+ u64 dram_base_addr, dram_limit_addr, dram_hole_base;
+ /* We start from the normalized address */
+ u64 ret_addr = norm_addr;
+
+ u32 tmp;
+
+ u8 die_id_shift, die_id_mask, socket_id_shift, socket_id_mask;
+ u8 intlv_num_dies, intlv_num_chan, intlv_num_sockets;
+ u8 intlv_addr_sel, intlv_addr_bit;
+ u8 num_intlv_bits, hashed_bit;
+ u8 lgcy_mmio_hole_en, base = 0;
+ u8 cs_mask, cs_id = 0;
+ bool hash_enabled = false;
+
+ /* Read D18F0x1B4 (DramOffset), check if base 1 is used. */
+ if (amd_df_indirect_read(nid, 0, 0x1B4, umc, &tmp))
+ goto out_err;
+
+ /* Remove HiAddrOffset from normalized address, if enabled: */
+ if (tmp & BIT(0)) {
+ u64 hi_addr_offset = (tmp & GENMASK_ULL(31, 20)) << 8;
+
+ if (norm_addr >= hi_addr_offset) {
+ ret_addr -= hi_addr_offset;
+ base = 1;
+ }
+ }
+
+ /* Read D18F0x110 (DramBaseAddress). */
+ if (amd_df_indirect_read(nid, 0, 0x110 + (8 * base), umc, &tmp))
+ goto out_err;
+
+ /* Check if address range is valid. */
+ if (!(tmp & BIT(0))) {
+ pr_err("%s: Invalid DramBaseAddress range: 0x%x.\n",
+ __func__, tmp);
+ goto out_err;
+ }
+
+ lgcy_mmio_hole_en = tmp & BIT(1);
+ intlv_num_chan = (tmp >> 4) & 0xF;
+ intlv_addr_sel = (tmp >> 8) & 0x7;
+ dram_base_addr = (tmp & GENMASK_ULL(31, 12)) << 16;
+
+ /* {0, 1, 2, 3} map to address bits {8, 9, 10, 11} respectively */
+ if (intlv_addr_sel > 3) {
+ pr_err("%s: Invalid interleave address select %d.\n",
+ __func__, intlv_addr_sel);
+ goto out_err;
+ }
+
+ /* Read D18F0x114 (DramLimitAddress). */
+ if (amd_df_indirect_read(nid, 0, 0x114 + (8 * base), umc, &tmp))
+ goto out_err;
+
+ intlv_num_sockets = (tmp >> 8) & 0x1;
+ intlv_num_dies = (tmp >> 10) & 0x3;
+ dram_limit_addr = ((tmp & GENMASK_ULL(31, 12)) << 16) | GENMASK_ULL(27, 0);
+
+ intlv_addr_bit = intlv_addr_sel + 8;
+
+ /* Re-use intlv_num_chan by setting it equal to log2(#channels) */
+ switch (intlv_num_chan) {
+ case 0: intlv_num_chan = 0; break;
+ case 1: intlv_num_chan = 1; break;
+ case 3: intlv_num_chan = 2; break;
+ case 5: intlv_num_chan = 3; break;
+ case 7: intlv_num_chan = 4; break;
+
+ case 8: intlv_num_chan = 1;
+ hash_enabled = true;
+ break;
+ default:
+ pr_err("%s: Invalid number of interleaved channels %d.\n",
+ __func__, intlv_num_chan);
+ goto out_err;
+ }
+
+ num_intlv_bits = intlv_num_chan;
+
+ if (intlv_num_dies > 2) {
+ pr_err("%s: Invalid number of interleaved nodes/dies %d.\n",
+ __func__, intlv_num_dies);
+ goto out_err;
+ }
+
+ num_intlv_bits += intlv_num_dies;
+
+ /* Add a bit if sockets are interleaved. */
+ num_intlv_bits += intlv_num_sockets;
+
+ /* Assert num_intlv_bits <= 4 */
+ if (num_intlv_bits > 4) {
+ pr_err("%s: Invalid interleave bits %d.\n",
+ __func__, num_intlv_bits);
+ goto out_err;
+ }
+
+ if (num_intlv_bits > 0) {
+ u64 temp_addr_x, temp_addr_i, temp_addr_y;
+ u8 die_id_bit, sock_id_bit, cs_fabric_id;
+
+ /*
+ * Read FabricBlockInstanceInformation3_CS[BlockFabricID].
+ * This is the fabric id for this coherent slave. Use
+ * umc/channel# as instance id of the coherent slave
+ * for FICAA.
+ */
+ if (amd_df_indirect_read(nid, 0, 0x50, umc, &tmp))
+ goto out_err;
+
+ cs_fabric_id = (tmp >> 8) & 0xFF;
+ die_id_bit = 0;
+
+ /* If interleaved over more than 1 channel: */
+ if (intlv_num_chan) {
+ die_id_bit = intlv_num_chan;
+ cs_mask = (1 << die_id_bit) - 1;
+ cs_id = cs_fabric_id & cs_mask;
+ }
+
+ sock_id_bit = die_id_bit;
+
+ /* Read D18F1x208 (SystemFabricIdMask). */
+ if (intlv_num_dies || intlv_num_sockets)
+ if (amd_df_indirect_read(nid, 1, 0x208, umc, &tmp))
+ goto out_err;
+
+ /* If interleaved over more than 1 die. */
+ if (intlv_num_dies) {
+ sock_id_bit = die_id_bit + intlv_num_dies;
+ die_id_shift = (tmp >> 24) & 0xF;
+ die_id_mask = (tmp >> 8) & 0xFF;
+
+ cs_id |= ((cs_fabric_id & die_id_mask) >> die_id_shift) << die_id_bit;
+ }
+
+ /* If interleaved over more than 1 socket. */
+ if (intlv_num_sockets) {
+ socket_id_shift = (tmp >> 28) & 0xF;
+ socket_id_mask = (tmp >> 16) & 0xFF;
+
+ cs_id |= ((cs_fabric_id & socket_id_mask) >> socket_id_shift) << sock_id_bit;
+ }
+
+ /*
+ * The pre-interleaved address consists of XXXXXXIIIYYYYY
+ * where III is the ID for this CS, and XXXXXXYYYYY are the
+ * address bits from the post-interleaved address.
+ * "num_intlv_bits" has been calculated to tell us how many "I"
+ * bits there are. "intlv_addr_bit" tells us how many "Y" bits
+ * there are (where "I" starts).
+ */
+ temp_addr_y = ret_addr & GENMASK_ULL(intlv_addr_bit-1, 0);
+ temp_addr_i = (cs_id << intlv_addr_bit);
+ temp_addr_x = (ret_addr & GENMASK_ULL(63, intlv_addr_bit)) << num_intlv_bits;
+ ret_addr = temp_addr_x | temp_addr_i | temp_addr_y;
+ }
+
+ /* Add dram base address */
+ ret_addr += dram_base_addr;
+
+ /* If legacy MMIO hole enabled */
+ if (lgcy_mmio_hole_en) {
+ if (amd_df_indirect_read(nid, 0, 0x104, umc, &tmp))
+ goto out_err;
+
+ dram_hole_base = tmp & GENMASK(31, 24);
+ if (ret_addr >= dram_hole_base)
+ ret_addr += (BIT_ULL(32) - dram_hole_base);
+ }
+
+ if (hash_enabled) {
+ /* Save some parentheses and grab ls-bit at the end. */
+ hashed_bit = (ret_addr >> 12) ^
+ (ret_addr >> 18) ^
+ (ret_addr >> 21) ^
+ (ret_addr >> 30) ^
+ cs_id;
+
+ hashed_bit &= BIT(0);
+
+ if (hashed_bit != ((ret_addr >> intlv_addr_bit) & BIT(0)))
+ ret_addr ^= BIT(intlv_addr_bit);
+ }
+
+ /* Is calculated system address is above DRAM limit address? */
+ if (ret_addr > dram_limit_addr)
+ goto out_err;
+
+ *sys_addr = ret_addr;
+ return 0;
+
+out_err:
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(umc_normaddr_to_sysaddr);
+
static void
__log_error(unsigned int bank, bool deferred_err, bool threshold_err, u64 misc)
{
projects / linux-beck.git / commitdiff