return dev_priv->lvds_use_ssc && i915_panel_use_ssc;
}
-static int intel_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
+static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
+ u32 fp_reg, dpll_reg;
+ int refclk, num_connectors = 0;
+ intel_clock_t clock, reduced_clock;
+ u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf;
+ bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
+ bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+ struct intel_encoder *has_edp_encoder = NULL;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *encoder;
+ const intel_limit_t *limit;
+ int ret;
+ struct fdi_m_n m_n = {0};
+ u32 reg, temp;
+ u32 lvds_sync = 0;
+ int target_clock;
+
+ drm_vblank_pre_modeset(dev, pipe);
+
+ list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+ if (encoder->base.crtc != crtc)
+ continue;
+
+ switch (encoder->type) {
+ case INTEL_OUTPUT_LVDS:
+ is_lvds = true;
+ break;
+ case INTEL_OUTPUT_SDVO:
+ case INTEL_OUTPUT_HDMI:
+ is_sdvo = true;
+ if (encoder->needs_tv_clock)
+ is_tv = true;
+ break;
+ case INTEL_OUTPUT_DVO:
+ is_dvo = true;
+ break;
+ case INTEL_OUTPUT_TVOUT:
+ is_tv = true;
+ break;
+ case INTEL_OUTPUT_ANALOG:
+ is_crt = true;
+ break;
+ case INTEL_OUTPUT_DISPLAYPORT:
+ is_dp = true;
+ break;
+ case INTEL_OUTPUT_EDP:
+ has_edp_encoder = encoder;
+ break;
+ }
+
+ num_connectors++;
+ }
+
+ if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
+ refclk = dev_priv->lvds_ssc_freq * 1000;
+ DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
+ refclk / 1000);
+ } else if (!IS_GEN2(dev)) {
+ refclk = 96000;
+ if (HAS_PCH_SPLIT(dev) &&
+ (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)))
+ refclk = 120000; /* 120Mhz refclk */
+ } else {
+ refclk = 48000;
+ }
+
+ /*
+ * Returns a set of divisors for the desired target clock with the given
+ * refclk, or FALSE. The returned values represent the clock equation:
+ * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+ */
+ limit = intel_limit(crtc, refclk);
+ ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock);
+ if (!ok) {
+ DRM_ERROR("Couldn't find PLL settings for mode!\n");
+ drm_vblank_post_modeset(dev, pipe);
+ return -EINVAL;
+ }
+
+ /* Ensure that the cursor is valid for the new mode before changing... */
+ intel_crtc_update_cursor(crtc, true);
+
+ if (is_lvds && dev_priv->lvds_downclock_avail) {
+ has_reduced_clock = limit->find_pll(limit, crtc,
+ dev_priv->lvds_downclock,
+ refclk,
+ &reduced_clock);
+ if (has_reduced_clock && (clock.p != reduced_clock.p)) {
+ /*
+ * If the different P is found, it means that we can't
+ * switch the display clock by using the FP0/FP1.
+ * In such case we will disable the LVDS downclock
+ * feature.
+ */
+ DRM_DEBUG_KMS("Different P is found for "
+ "LVDS clock/downclock\n");
+ has_reduced_clock = 0;
+ }
+ }
+ /* SDVO TV has fixed PLL values depend on its clock range,
+ this mirrors vbios setting. */
+ if (is_sdvo && is_tv) {
+ if (adjusted_mode->clock >= 100000
+ && adjusted_mode->clock < 140500) {
+ clock.p1 = 2;
+ clock.p2 = 10;
+ clock.n = 3;
+ clock.m1 = 16;
+ clock.m2 = 8;
+ } else if (adjusted_mode->clock >= 140500
+ && adjusted_mode->clock <= 200000) {
+ clock.p1 = 1;
+ clock.p2 = 10;
+ clock.n = 6;
+ clock.m1 = 12;
+ clock.m2 = 8;
+ }
+ }
+
+ /* FDI link */
+ if (HAS_PCH_SPLIT(dev)) {
+ int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+ int lane = 0, link_bw, bpp;
+ /* CPU eDP doesn't require FDI link, so just set DP M/N
+ according to current link config */
+ if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ target_clock = mode->clock;
+ intel_edp_link_config(has_edp_encoder,
+ &lane, &link_bw);
+ } else {
+ /* [e]DP over FDI requires target mode clock
+ instead of link clock */
+ if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
+ target_clock = mode->clock;
+ else
+ target_clock = adjusted_mode->clock;
+
+ /* FDI is a binary signal running at ~2.7GHz, encoding
+ * each output octet as 10 bits. The actual frequency
+ * is stored as a divider into a 100MHz clock, and the
+ * mode pixel clock is stored in units of 1KHz.
+ * Hence the bw of each lane in terms of the mode signal
+ * is:
+ */
+ link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
+ }
+
+ /* determine panel color depth */
+ temp = I915_READ(PIPECONF(pipe));
+ temp &= ~PIPE_BPC_MASK;
+ if (is_lvds) {
+ /* the BPC will be 6 if it is 18-bit LVDS panel */
+ if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
+ temp |= PIPE_8BPC;
+ else
+ temp |= PIPE_6BPC;
+ } else if (has_edp_encoder) {
+ switch (dev_priv->edp.bpp/3) {
+ case 8:
+ temp |= PIPE_8BPC;
+ break;
+ case 10:
+ temp |= PIPE_10BPC;
+ break;
+ case 6:
+ temp |= PIPE_6BPC;
+ break;
+ case 12:
+ temp |= PIPE_12BPC;
+ break;
+ }
+ } else
+ temp |= PIPE_8BPC;
+ I915_WRITE(PIPECONF(pipe), temp);
+
+ switch (temp & PIPE_BPC_MASK) {
+ case PIPE_8BPC:
+ bpp = 24;
+ break;
+ case PIPE_10BPC:
+ bpp = 30;
+ break;
+ case PIPE_6BPC:
+ bpp = 18;
+ break;
+ case PIPE_12BPC:
+ bpp = 36;
+ break;
+ default:
+ DRM_ERROR("unknown pipe bpc value\n");
+ bpp = 24;
+ }
+
+ if (!lane) {
+ /*
+ * Account for spread spectrum to avoid
+ * oversubscribing the link. Max center spread
+ * is 2.5%; use 5% for safety's sake.
+ */
+ u32 bps = target_clock * bpp * 21 / 20;
+ lane = bps / (link_bw * 8) + 1;
+ }
+
+ intel_crtc->fdi_lanes = lane;
+
+ if (pixel_multiplier > 1)
+ link_bw *= pixel_multiplier;
+ ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
+ }
+
+ /* Ironlake: try to setup display ref clock before DPLL
+ * enabling. This is only under driver's control after
+ * PCH B stepping, previous chipset stepping should be
+ * ignoring this setting.
+ */
+ if (HAS_PCH_SPLIT(dev)) {
+ temp = I915_READ(PCH_DREF_CONTROL);
+ /* Always enable nonspread source */
+ temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+ temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+ temp &= ~DREF_SSC_SOURCE_MASK;
+ temp |= DREF_SSC_SOURCE_ENABLE;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
+
+ if (has_edp_encoder) {
+ if (intel_panel_use_ssc(dev_priv)) {
+ temp |= DREF_SSC1_ENABLE;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
+ }
+ temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+
+ /* Enable CPU source on CPU attached eDP */
+ if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ if (intel_panel_use_ssc(dev_priv))
+ temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+ else
+ temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+ } else {
+ /* Enable SSC on PCH eDP if needed */
+ if (intel_panel_use_ssc(dev_priv)) {
+ DRM_ERROR("enabling SSC on PCH\n");
+ temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
+ }
+ }
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
+ }
+ }
+
+ if (IS_PINEVIEW(dev)) {
+ fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
+ if (has_reduced_clock)
+ fp2 = (1 << reduced_clock.n) << 16 |
+ reduced_clock.m1 << 8 | reduced_clock.m2;
+ } else {
+ fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+ if (has_reduced_clock)
+ fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
+ reduced_clock.m2;
+ }
+
+ /* Enable autotuning of the PLL clock (if permissible) */
+ if (HAS_PCH_SPLIT(dev)) {
+ int factor = 21;
+
+ if (is_lvds) {
+ if ((intel_panel_use_ssc(dev_priv) &&
+ dev_priv->lvds_ssc_freq == 100) ||
+ (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
+ factor = 25;
+ } else if (is_sdvo && is_tv)
+ factor = 20;
+
+ if (clock.m1 < factor * clock.n)
+ fp |= FP_CB_TUNE;
+ }
+
+ dpll = 0;
+ if (!HAS_PCH_SPLIT(dev))
+ dpll = DPLL_VGA_MODE_DIS;
+
+ if (!IS_GEN2(dev)) {
+ if (is_lvds)
+ dpll |= DPLLB_MODE_LVDS;
+ else
+ dpll |= DPLLB_MODE_DAC_SERIAL;
+ if (is_sdvo) {
+ int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+ if (pixel_multiplier > 1) {
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+ else if (HAS_PCH_SPLIT(dev))
+ dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
+ }
+ dpll |= DPLL_DVO_HIGH_SPEED;
+ }
+ if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
+ dpll |= DPLL_DVO_HIGH_SPEED;
+
+ /* compute bitmask from p1 value */
+ if (IS_PINEVIEW(dev))
+ dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
+ else {
+ dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ /* also FPA1 */
+ if (HAS_PCH_SPLIT(dev))
+ dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+ if (IS_G4X(dev) && has_reduced_clock)
+ dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+ }
+ switch (clock.p2) {
+ case 5:
+ dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+ break;
+ case 7:
+ dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+ break;
+ case 10:
+ dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+ break;
+ case 14:
+ dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+ break;
+ }
+ if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev))
+ dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
+ } else {
+ if (is_lvds) {
+ dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ } else {
+ if (clock.p1 == 2)
+ dpll |= PLL_P1_DIVIDE_BY_TWO;
+ else
+ dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+ if (clock.p2 == 4)
+ dpll |= PLL_P2_DIVIDE_BY_4;
+ }
+ }
+
+ if (is_sdvo && is_tv)
+ dpll |= PLL_REF_INPUT_TVCLKINBC;
+ else if (is_tv)
+ /* XXX: just matching BIOS for now */
+ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
+ dpll |= 3;
+ else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+ dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+ else
+ dpll |= PLL_REF_INPUT_DREFCLK;
+
+ /* setup pipeconf */
+ pipeconf = I915_READ(PIPECONF(pipe));
+
+ /* Set up the display plane register */
+ dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+ /* Ironlake's plane is forced to pipe, bit 24 is to
+ enable color space conversion */
+ if (!HAS_PCH_SPLIT(dev)) {
+ if (pipe == 0)
+ dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
+ else
+ dspcntr |= DISPPLANE_SEL_PIPE_B;
+ }
+
+ if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
+ /* Enable pixel doubling when the dot clock is > 90% of the (display)
+ * core speed.
+ *
+ * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
+ * pipe == 0 check?
+ */
+ if (mode->clock >
+ dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
+ pipeconf |= PIPECONF_DOUBLE_WIDE;
+ else
+ pipeconf &= ~PIPECONF_DOUBLE_WIDE;
+ }
+
+ if (!HAS_PCH_SPLIT(dev))
+ dpll |= DPLL_VCO_ENABLE;
+
+ DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+ drm_mode_debug_printmodeline(mode);
+
+ /* assign to Ironlake registers */
+ if (HAS_PCH_SPLIT(dev)) {
+ fp_reg = PCH_FP0(pipe);
+ dpll_reg = PCH_DPLL(pipe);
+ } else {
+ fp_reg = FP0(pipe);
+ dpll_reg = DPLL(pipe);
+ }
+
+ /* PCH eDP needs FDI, but CPU eDP does not */
+ if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ I915_WRITE(fp_reg, fp);
+ I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
+
+ POSTING_READ(dpll_reg);
+ udelay(150);
+ }
+
+ /* enable transcoder DPLL */
+ if (HAS_PCH_CPT(dev)) {
+ temp = I915_READ(PCH_DPLL_SEL);
+ switch (pipe) {
+ case 0:
+ temp |= TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL;
+ break;
+ case 1:
+ temp |= TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL;
+ break;
+ case 2:
+ /* FIXME: manage transcoder PLLs? */
+ temp |= TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL;
+ break;
+ default:
+ BUG();
+ }
+ I915_WRITE(PCH_DPLL_SEL, temp);
+
+ POSTING_READ(PCH_DPLL_SEL);
+ udelay(150);
+ }
+
+ /* The LVDS pin pair needs to be on before the DPLLs are enabled.
+ * This is an exception to the general rule that mode_set doesn't turn
+ * things on.
+ */
+ if (is_lvds) {
+ reg = LVDS;
+ if (HAS_PCH_SPLIT(dev))
+ reg = PCH_LVDS;
+
+ temp = I915_READ(reg);
+ temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+ if (pipe == 1) {
+ if (HAS_PCH_CPT(dev))
+ temp |= PORT_TRANS_B_SEL_CPT;
+ else
+ temp |= LVDS_PIPEB_SELECT;
+ } else {
+ if (HAS_PCH_CPT(dev))
+ temp &= ~PORT_TRANS_SEL_MASK;
+ else
+ temp &= ~LVDS_PIPEB_SELECT;
+ }
+ /* set the corresponsding LVDS_BORDER bit */
+ temp |= dev_priv->lvds_border_bits;
+ /* Set the B0-B3 data pairs corresponding to whether we're going to
+ * set the DPLLs for dual-channel mode or not.
+ */
+ if (clock.p2 == 7)
+ temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+ else
+ temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+ /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+ * appropriately here, but we need to look more thoroughly into how
+ * panels behave in the two modes.
+ */
+ /* set the dithering flag on non-PCH LVDS as needed */
+ if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
+ if (dev_priv->lvds_dither)
+ temp |= LVDS_ENABLE_DITHER;
+ else
+ temp &= ~LVDS_ENABLE_DITHER;
+ }
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+ lvds_sync |= LVDS_HSYNC_POLARITY;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+ lvds_sync |= LVDS_VSYNC_POLARITY;
+ if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
+ != lvds_sync) {
+ char flags[2] = "-+";
+ DRM_INFO("Changing LVDS panel from "
+ "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
+ flags[!(temp & LVDS_HSYNC_POLARITY)],
+ flags[!(temp & LVDS_VSYNC_POLARITY)],
+ flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
+ flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
+ temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+ temp |= lvds_sync;
+ }
+ I915_WRITE(reg, temp);
+ }
+
+ /* set the dithering flag and clear for anything other than a panel. */
+ if (HAS_PCH_SPLIT(dev)) {
+ pipeconf &= ~PIPECONF_DITHER_EN;
+ pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
+ if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) {
+ pipeconf |= PIPECONF_DITHER_EN;
+ pipeconf |= PIPECONF_DITHER_TYPE_ST1;
+ }
+ }
+
+ if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ intel_dp_set_m_n(crtc, mode, adjusted_mode);
+ } else if (HAS_PCH_SPLIT(dev)) {
+ /* For non-DP output, clear any trans DP clock recovery setting.*/
+ I915_WRITE(TRANSDATA_M1(pipe), 0);
+ I915_WRITE(TRANSDATA_N1(pipe), 0);
+ I915_WRITE(TRANSDPLINK_M1(pipe), 0);
+ I915_WRITE(TRANSDPLINK_N1(pipe), 0);
+ }
+
+ if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ I915_WRITE(dpll_reg, dpll);
+
+ /* Wait for the clocks to stabilize. */
+ POSTING_READ(dpll_reg);
+ udelay(150);
+
+ if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
+ temp = 0;
+ if (is_sdvo) {
+ temp = intel_mode_get_pixel_multiplier(adjusted_mode);
+ if (temp > 1)
+ temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+ else
+ temp = 0;
+ }
+ I915_WRITE(DPLL_MD(pipe), temp);
+ } else {
+ /* The pixel multiplier can only be updated once the
+ * DPLL is enabled and the clocks are stable.
+ *
+ * So write it again.
+ */
+ I915_WRITE(dpll_reg, dpll);
+ }
+ }
+
+ intel_crtc->lowfreq_avail = false;
+ if (is_lvds && has_reduced_clock && i915_powersave) {
+ I915_WRITE(fp_reg + 4, fp2);
+ intel_crtc->lowfreq_avail = true;
+ if (HAS_PIPE_CXSR(dev)) {
+ DRM_DEBUG_KMS("enabling CxSR downclocking\n");
+ pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
+ }
+ } else {
+ I915_WRITE(fp_reg + 4, fp);
+ if (HAS_PIPE_CXSR(dev)) {
+ DRM_DEBUG_KMS("disabling CxSR downclocking\n");
+ pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+ }
+ }
+
+ if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+ pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
+ /* the chip adds 2 halflines automatically */
+ adjusted_mode->crtc_vdisplay -= 1;
+ adjusted_mode->crtc_vtotal -= 1;
+ adjusted_mode->crtc_vblank_start -= 1;
+ adjusted_mode->crtc_vblank_end -= 1;
+ adjusted_mode->crtc_vsync_end -= 1;
+ adjusted_mode->crtc_vsync_start -= 1;
+ } else
+ pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */
+
+ I915_WRITE(HTOTAL(pipe),
+ (adjusted_mode->crtc_hdisplay - 1) |
+ ((adjusted_mode->crtc_htotal - 1) << 16));
+ I915_WRITE(HBLANK(pipe),
+ (adjusted_mode->crtc_hblank_start - 1) |
+ ((adjusted_mode->crtc_hblank_end - 1) << 16));
+ I915_WRITE(HSYNC(pipe),
+ (adjusted_mode->crtc_hsync_start - 1) |
+ ((adjusted_mode->crtc_hsync_end - 1) << 16));
+
+ I915_WRITE(VTOTAL(pipe),
+ (adjusted_mode->crtc_vdisplay - 1) |
+ ((adjusted_mode->crtc_vtotal - 1) << 16));
+ I915_WRITE(VBLANK(pipe),
+ (adjusted_mode->crtc_vblank_start - 1) |
+ ((adjusted_mode->crtc_vblank_end - 1) << 16));
+ I915_WRITE(VSYNC(pipe),
+ (adjusted_mode->crtc_vsync_start - 1) |
+ ((adjusted_mode->crtc_vsync_end - 1) << 16));
+
+ /* pipesrc and dspsize control the size that is scaled from,
+ * which should always be the user's requested size.
+ */
+ if (!HAS_PCH_SPLIT(dev)) {
+ I915_WRITE(DSPSIZE(plane),
+ ((mode->vdisplay - 1) << 16) |
+ (mode->hdisplay - 1));
+ I915_WRITE(DSPPOS(plane), 0);
+ }
+ I915_WRITE(PIPESRC(pipe),
+ ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+
+ if (HAS_PCH_SPLIT(dev)) {
+ I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
+ I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
+ I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
+ I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
+
+ if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ ironlake_set_pll_edp(crtc, adjusted_mode->clock);
+ }
+ }
+
+ I915_WRITE(PIPECONF(pipe), pipeconf);
+ POSTING_READ(PIPECONF(pipe));
+ if (!HAS_PCH_SPLIT(dev))
+ intel_enable_pipe(dev_priv, pipe, false);
+
+ intel_wait_for_vblank(dev, pipe);
+
+ if (IS_GEN5(dev)) {
+ /* enable address swizzle for tiling buffer */
+ temp = I915_READ(DISP_ARB_CTL);
+ I915_WRITE(DISP_ARB_CTL, temp | DISP_TILE_SURFACE_SWIZZLING);
+ }
+
+ I915_WRITE(DSPCNTR(plane), dspcntr);
+ POSTING_READ(DSPCNTR(plane));
+
+ ret = intel_pipe_set_base(crtc, x, y, old_fb);
+
+ intel_update_watermarks(dev);
+
+ drm_vblank_post_modeset(dev, pipe);
+
+ return ret;
+}
+
+static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
return ret;
}
+static int intel_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret;
+
+ ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
+ x, y, old_fb);
+
+ return ret;
+}
+
/** Loads the palette/gamma unit for the CRTC with the prepared values */
void intel_crtc_load_lut(struct drm_crtc *crtc)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/* We always want a DPMS function */
- if (HAS_PCH_SPLIT(dev))
+ if (HAS_PCH_SPLIT(dev)) {
dev_priv->display.dpms = ironlake_crtc_dpms;
- else
+ dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
+ } else {
dev_priv->display.dpms = i9xx_crtc_dpms;
+ dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
+ }
if (I915_HAS_FBC(dev)) {
if (HAS_PCH_SPLIT(dev)) {
projects / karo-tx-linux.git / commitdiff