]> git.karo-electronics.de Git - linux-beck.git/commitdiff
[media] af9013: rewrite whole driver
authorAntti Palosaari <crope@iki.fi>
Mon, 28 Nov 2011 23:58:11 +0000 (20:58 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Fri, 30 Dec 2011 17:31:33 +0000 (15:31 -0200)
Rewrite whole af9013 demod driver in order to decrease I2C I/O.

We need to decrease I2C load since AF9015 (I2C adapter / USB-bridge used)
seems to have some problems under heavy I2C traffic.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb/dvb-usb/af9015.c
drivers/media/dvb/frontends/af9013.c
drivers/media/dvb/frontends/af9013.h
drivers/media/dvb/frontends/af9013_priv.h

index 033aa8affd8e06280fe66709034f066d2ae92cef..7b606b7834b33af0dca1d7cb34db29f5ec03393a 100644 (file)
@@ -50,14 +50,14 @@ static int af9015_properties_count = ARRAY_SIZE(af9015_properties);
 
 static struct af9013_config af9015_af9013_config[] = {
        {
-               .demod_address = AF9015_I2C_DEMOD,
-               .output_mode = AF9013_OUTPUT_MODE_USB,
+               .i2c_addr = AF9015_I2C_DEMOD,
+               .ts_mode = AF9013_TS_USB,
                .api_version = { 0, 1, 9, 0 },
                .gpio[0] = AF9013_GPIO_HI,
                .gpio[3] = AF9013_GPIO_TUNER_ON,
 
        }, {
-               .output_mode = AF9013_OUTPUT_MODE_SERIAL,
+               .ts_mode = AF9013_TS_SERIAL,
                .api_version = { 0, 1, 9, 0 },
                .gpio[0] = AF9013_GPIO_TUNER_ON,
                .gpio[1] = AF9013_GPIO_LO,
@@ -216,8 +216,8 @@ static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
 {
        struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val};
 
-       if (addr == af9015_af9013_config[0].demod_address ||
-           addr == af9015_af9013_config[1].demod_address)
+       if (addr == af9015_af9013_config[0].i2c_addr ||
+           addr == af9015_af9013_config[1].i2c_addr)
                req.addr_len = 3;
 
        return af9015_ctrl_msg(d, &req);
@@ -228,8 +228,8 @@ static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
 {
        struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val};
 
-       if (addr == af9015_af9013_config[0].demod_address ||
-           addr == af9015_af9013_config[1].demod_address)
+       if (addr == af9015_af9013_config[0].i2c_addr ||
+           addr == af9015_af9013_config[1].i2c_addr)
                req.addr_len = 3;
 
        return af9015_ctrl_msg(d, &req);
@@ -271,8 +271,8 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
                return -EAGAIN;
 
        while (i < num) {
-               if (msg[i].addr == af9015_af9013_config[0].demod_address ||
-                   msg[i].addr == af9015_af9013_config[1].demod_address) {
+               if (msg[i].addr == af9015_af9013_config[0].i2c_addr ||
+                   msg[i].addr == af9015_af9013_config[1].i2c_addr) {
                        addr = msg[i].buf[0] << 8;
                        addr += msg[i].buf[1];
                        mbox = msg[i].buf[2];
@@ -288,8 +288,7 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
                                ret = -EOPNOTSUPP;
                                goto error;
                        }
-                       if (msg[i].addr ==
-                               af9015_af9013_config[0].demod_address)
+                       if (msg[i].addr == af9015_af9013_config[0].i2c_addr)
                                req.cmd = READ_MEMORY;
                        else
                                req.cmd = READ_I2C;
@@ -307,7 +306,7 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
                                goto error;
                        }
                        if (msg[i].addr ==
-                               af9015_af9013_config[0].demod_address) {
+                               af9015_af9013_config[0].i2c_addr) {
                                ret = -EINVAL;
                                goto error;
                        }
@@ -325,8 +324,7 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
                                ret = -EOPNOTSUPP;
                                goto error;
                        }
-                       if (msg[i].addr ==
-                               af9015_af9013_config[0].demod_address)
+                       if (msg[i].addr == af9015_af9013_config[0].i2c_addr)
                                req.cmd = WRITE_MEMORY;
                        else
                                req.cmd = WRITE_I2C;
@@ -508,7 +506,7 @@ static int af9015_copy_firmware(struct dvb_usb_device *d)
        msleep(100);
 
        ret = af9015_read_reg_i2c(d,
-               af9015_af9013_config[1].demod_address, 0x98be, &val);
+               af9015_af9013_config[1].i2c_addr, 0x98be, &val);
        if (ret)
                goto error;
        else
@@ -536,7 +534,7 @@ static int af9015_copy_firmware(struct dvb_usb_device *d)
                goto error;
 
        /* request boot firmware */
-       ret = af9015_write_reg_i2c(d, af9015_af9013_config[1].demod_address,
+       ret = af9015_write_reg_i2c(d, af9015_af9013_config[1].i2c_addr,
                0xe205, 1);
        deb_info("%s: firmware boot cmd status:%d\n", __func__, ret);
        if (ret)
@@ -547,7 +545,7 @@ static int af9015_copy_firmware(struct dvb_usb_device *d)
 
                /* check firmware status */
                ret = af9015_read_reg_i2c(d,
-                       af9015_af9013_config[1].demod_address, 0x98be, &val);
+                       af9015_af9013_config[1].i2c_addr, 0x98be, &val);
                deb_info("%s: firmware status cmd status:%d fw status:%02x\n",
                        __func__, ret, val);
                if (ret)
@@ -840,7 +838,7 @@ static int af9015_read_config(struct usb_device *udev)
        if (ret)
                goto error;
 
-       deb_info("%s: IR mode:%d\n", __func__, val);
+       deb_info("%s: IR mode=%d\n", __func__, val);
        for (i = 0; i < af9015_properties_count; i++) {
                if (val == AF9015_IR_MODE_DISABLED)
                        af9015_properties[i].rc.core.rc_codes = NULL;
@@ -854,7 +852,7 @@ static int af9015_read_config(struct usb_device *udev)
        if (ret)
                goto error;
        af9015_config.dual_mode = val;
-       deb_info("%s: TS mode:%d\n", __func__, af9015_config.dual_mode);
+       deb_info("%s: TS mode=%d\n", __func__, af9015_config.dual_mode);
 
        /* Set adapter0 buffer size according to USB port speed, adapter1 buffer
           size can be static because it is enabled only USB2.0 */
@@ -878,7 +876,7 @@ static int af9015_read_config(struct usb_device *udev)
                ret = af9015_rw_udev(udev, &req);
                if (ret)
                        goto error;
-               af9015_af9013_config[1].demod_address = val;
+               af9015_af9013_config[1].i2c_addr = val;
 
                /* enable 2nd adapter */
                for (i = 0; i < af9015_properties_count; i++)
@@ -900,34 +898,38 @@ static int af9015_read_config(struct usb_device *udev)
                        goto error;
                switch (val) {
                case 0:
-                       af9015_af9013_config[i].adc_clock = 28800;
+                       af9015_af9013_config[i].clock = 28800000;
                        break;
                case 1:
-                       af9015_af9013_config[i].adc_clock = 20480;
+                       af9015_af9013_config[i].clock = 20480000;
                        break;
                case 2:
-                       af9015_af9013_config[i].adc_clock = 28000;
+                       af9015_af9013_config[i].clock = 28000000;
                        break;
                case 3:
-                       af9015_af9013_config[i].adc_clock = 25000;
+                       af9015_af9013_config[i].clock = 25000000;
                        break;
                };
-               deb_info("%s: [%d] xtal:%d set adc_clock:%d\n", __func__, i,
-                       val, af9015_af9013_config[i].adc_clock);
+               deb_info("%s: [%d] xtal=%d set clock=%d\n", __func__, i,
+                       val, af9015_af9013_config[i].clock);
 
-               /* tuner IF */
+               /* IF frequency */
                req.addr = AF9015_EEPROM_IF1H + offset;
                ret = af9015_rw_udev(udev, &req);
                if (ret)
                        goto error;
-               af9015_af9013_config[i].tuner_if = val << 8;
+
+               af9015_af9013_config[i].if_frequency = val << 8;
+
                req.addr = AF9015_EEPROM_IF1L + offset;
                ret = af9015_rw_udev(udev, &req);
                if (ret)
                        goto error;
-               af9015_af9013_config[i].tuner_if += val;
-               deb_info("%s: [%d] IF1:%d\n", __func__, i,
-                       af9015_af9013_config[0].tuner_if);
+
+               af9015_af9013_config[i].if_frequency += val;
+               af9015_af9013_config[i].if_frequency *= 1000;
+               deb_info("%s: [%d] IF frequency=%d\n", __func__, i,
+                       af9015_af9013_config[0].if_frequency);
 
                /* MT2060 IF1 */
                req.addr = AF9015_EEPROM_MT2060_IF1H  + offset;
@@ -940,7 +942,7 @@ static int af9015_read_config(struct usb_device *udev)
                if (ret)
                        goto error;
                af9015_config.mt2060_if1[i] += val;
-               deb_info("%s: [%d] MT2060 IF1:%d\n", __func__, i,
+               deb_info("%s: [%d] MT2060 IF1=%d\n", __func__, i,
                        af9015_config.mt2060_if1[i]);
 
                /* tuner */
@@ -957,30 +959,30 @@ static int af9015_read_config(struct usb_device *udev)
                case AF9013_TUNER_TDA18271:
                case AF9013_TUNER_QT1010A:
                case AF9013_TUNER_TDA18218:
-                       af9015_af9013_config[i].rf_spec_inv = 1;
+                       af9015_af9013_config[i].spec_inv = 1;
                        break;
                case AF9013_TUNER_MXL5003D:
                case AF9013_TUNER_MXL5005D:
                case AF9013_TUNER_MXL5005R:
                case AF9013_TUNER_MXL5007T:
-                       af9015_af9013_config[i].rf_spec_inv = 0;
+                       af9015_af9013_config[i].spec_inv = 0;
                        break;
                case AF9013_TUNER_MC44S803:
                        af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO;
-                       af9015_af9013_config[i].rf_spec_inv = 1;
+                       af9015_af9013_config[i].spec_inv = 1;
                        break;
                default:
-                       warn("tuner id:%d not supported, please report!", val);
+                       warn("tuner id=%d not supported, please report!", val);
                        return -ENODEV;
                };
 
                af9015_af9013_config[i].tuner = val;
-               deb_info("%s: [%d] tuner id:%d\n", __func__, i, val);
+               deb_info("%s: [%d] tuner id=%d\n", __func__, i, val);
        }
 
 error:
        if (ret)
-               err("eeprom read failed:%d", ret);
+               err("eeprom read failed=%d", ret);
 
        /* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM
           content :-( Override some wrong values here. Ditto for the
@@ -998,7 +1000,7 @@ error:
                        af9015_properties[i].num_adapters = 1;
 
                /* set correct IF */
-               af9015_af9013_config[0].tuner_if = 4570;
+               af9015_af9013_config[0].if_frequency = 4570000;
        }
 
        return ret;
@@ -1156,7 +1158,7 @@ static int af9015_af9013_sleep(struct dvb_frontend *fe)
        if (mutex_lock_interruptible(&adap->dev->usb_mutex))
                return -EAGAIN;
 
-       ret = priv->init[adap->id](fe);
+       ret = priv->sleep[adap->id](fe);
 
        mutex_unlock(&adap->dev->usb_mutex);
 
index f4276e471d386d66231e683b8db2fb2751cc91c7..77862fe2c65ed655a3f7899b09ea00101110a48b 100644 (file)
@@ -2,6 +2,7 @@
  * Afatech AF9013 demodulator driver
  *
  * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
  *
  * Thanks to Afatech who kindly provided information.
  *
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/firmware.h>
-
-#include "dvb_frontend.h"
 #include "af9013_priv.h"
-#include "af9013.h"
 
 int af9013_debug;
+module_param_named(debug, af9013_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
 struct af9013_state {
        struct i2c_adapter *i2c;
-       struct dvb_frontend frontend;
-
+       struct dvb_frontend fe;
        struct af9013_config config;
 
        /* tuner/demod RF and IF AGC limits used for signal strength calc */
@@ -48,107 +39,178 @@ struct af9013_state {
        u32 ber;
        u32 ucblocks;
        u16 snr;
-       u32 frequency;
-       unsigned long next_statistics_check;
+       u32 bandwidth_hz;
+       fe_status_t fe_status;
+       unsigned long set_frontend_jiffies;
+       unsigned long read_status_jiffies;
+       bool first_tune;
+       bool i2c_gate_state;
+       unsigned int statistics_step:3;
+       struct delayed_work statistics_work;
 };
 
-static u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff };
-
-static int af9013_write_regs(struct af9013_state *state, u8 mbox, u16 reg,
-       u8 *val, u8 len)
+/* write multiple registers */
+static int af9013_wr_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg,
+       const u8 *val, int len)
 {
+       int ret;
        u8 buf[3+len];
-       struct i2c_msg msg = {
-               .addr = state->config.demod_address,
-               .flags = 0,
-               .len = sizeof(buf),
-               .buf = buf };
-
-       buf[0] = reg >> 8;
-       buf[1] = reg & 0xff;
+       struct i2c_msg msg[1] = {
+               {
+                       .addr = priv->config.i2c_addr,
+                       .flags = 0,
+                       .len = sizeof(buf),
+                       .buf = buf,
+               }
+       };
+
+       buf[0] = (reg >> 8) & 0xff;
+       buf[1] = (reg >> 0) & 0xff;
        buf[2] = mbox;
        memcpy(&buf[3], val, len);
 
-       if (i2c_transfer(state->i2c, &msg, 1) != 1) {
-               warn("I2C write failed reg:%04x len:%d", reg, len);
-               return -EREMOTEIO;
+       ret = i2c_transfer(priv->i2c, msg, 1);
+       if (ret == 1) {
+               ret = 0;
+       } else {
+               warn("i2c wr failed=%d reg=%04x len=%d", ret, reg, len);
+               ret = -EREMOTEIO;
        }
-       return 0;
+       return ret;
 }
 
-static int af9013_write_ofdm_regs(struct af9013_state *state, u16 reg, u8 *val,
-       u8 len)
+/* read multiple registers */
+static int af9013_rd_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg,
+       u8 *val, int len)
 {
-       u8 mbox = (1 << 0)|(1 << 1)|((len - 1) << 2)|(0 << 6)|(0 << 7);
-       return af9013_write_regs(state, mbox, reg, val, len);
+       int ret;
+       u8 buf[3];
+       struct i2c_msg msg[2] = {
+               {
+                       .addr = priv->config.i2c_addr,
+                       .flags = 0,
+                       .len = 3,
+                       .buf = buf,
+               }, {
+                       .addr = priv->config.i2c_addr,
+                       .flags = I2C_M_RD,
+                       .len = len,
+                       .buf = val,
+               }
+       };
+
+       buf[0] = (reg >> 8) & 0xff;
+       buf[1] = (reg >> 0) & 0xff;
+       buf[2] = mbox;
+
+       ret = i2c_transfer(priv->i2c, msg, 2);
+       if (ret == 2) {
+               ret = 0;
+       } else {
+               warn("i2c rd failed=%d reg=%04x len=%d", ret, reg, len);
+               ret = -EREMOTEIO;
+       }
+       return ret;
 }
 
-static int af9013_write_ofsm_regs(struct af9013_state *state, u16 reg, u8 *val,
-       u8 len)
+/* write multiple registers */
+static int af9013_wr_regs(struct af9013_state *priv, u16 reg, const u8 *val,
+       int len)
 {
-       u8 mbox = (1 << 0)|(1 << 1)|((len - 1) << 2)|(1 << 6)|(1 << 7);
-       return af9013_write_regs(state, mbox, reg, val, len);
+       int ret, i;
+       u8 mbox = (0 << 7)|(0 << 6)|(1 << 1)|(1 << 0);
+
+       if ((priv->config.ts_mode == AF9013_TS_USB) &
+               ((reg & 0xff00) != 0xff00) & ((reg & 0xff00) != 0xae00)) {
+               mbox |= ((len - 1) << 2);
+               ret = af9013_wr_regs_i2c(priv, mbox, reg, val, len);
+       } else {
+               for (i = 0; i < len; i++) {
+                       ret = af9013_wr_regs_i2c(priv, mbox, reg+i, val+i, 1);
+                       if (ret)
+                               goto err;
+               }
+       }
+
+err:
+       return 0;
+}
+
+/* read multiple registers */
+static int af9013_rd_regs(struct af9013_state *priv, u16 reg, u8 *val, int len)
+{
+       int ret, i;
+       u8 mbox = (0 << 7)|(0 << 6)|(1 << 1)|(0 << 0);
+
+       if ((priv->config.ts_mode == AF9013_TS_USB) &
+               ((reg & 0xff00) != 0xff00) & ((reg & 0xff00) != 0xae00)) {
+               mbox |= ((len - 1) << 2);
+               ret = af9013_rd_regs_i2c(priv, mbox, reg, val, len);
+       } else {
+               for (i = 0; i < len; i++) {
+                       ret = af9013_rd_regs_i2c(priv, mbox, reg+i, val+i, 1);
+                       if (ret)
+                               goto err;
+               }
+       }
+
+err:
+       return 0;
 }
 
 /* write single register */
-static int af9013_write_reg(struct af9013_state *state, u16 reg, u8 val)
+static int af9013_wr_reg(struct af9013_state *priv, u16 reg, u8 val)
 {
-       return af9013_write_ofdm_regs(state, reg, &val, 1);
+       return af9013_wr_regs(priv, reg, &val, 1);
 }
 
 /* read single register */
-static int af9013_read_reg(struct af9013_state *state, u16 reg, u8 *val)
+static int af9013_rd_reg(struct af9013_state *priv, u16 reg, u8 *val)
 {
-       u8 obuf[3] = { reg >> 8, reg & 0xff, 0 };
-       u8 ibuf[1];
-       struct i2c_msg msg[2] = {
-               {
-                       .addr = state->config.demod_address,
-                       .flags = 0,
-                       .len = sizeof(obuf),
-                       .buf = obuf
-               }, {
-                       .addr = state->config.demod_address,
-                       .flags = I2C_M_RD,
-                       .len = sizeof(ibuf),
-                       .buf = ibuf
-               }
-       };
+       return af9013_rd_regs(priv, reg, val, 1);
+}
 
-       if (i2c_transfer(state->i2c, msg, 2) != 2) {
-               warn("I2C read failed reg:%04x", reg);
-               return -EREMOTEIO;
-       }
-       *val = ibuf[0];
-       return 0;
+static int af9013_write_ofsm_regs(struct af9013_state *state, u16 reg, u8 *val,
+       u8 len)
+{
+       u8 mbox = (1 << 7)|(1 << 6)|((len - 1) << 2)|(1 << 1)|(1 << 0);
+       return af9013_wr_regs_i2c(state, mbox, reg, val, len);
 }
 
-static int af9013_write_reg_bits(struct af9013_state *state, u16 reg, u8 pos,
-       u8 len, u8 val)
+static int af9013_wr_reg_bits(struct af9013_state *state, u16 reg, int pos,
+       int len, u8 val)
 {
        int ret;
        u8 tmp, mask;
 
-       ret = af9013_read_reg(state, reg, &tmp);
-       if (ret)
-               return ret;
+       /* no need for read if whole reg is written */
+       if (len != 8) {
+               ret = af9013_rd_reg(state, reg, &tmp);
+               if (ret)
+                       return ret;
 
-       mask = regmask[len - 1] << pos;
-       tmp = (tmp & ~mask) | ((val << pos) & mask);
+               mask = (0xff >> (8 - len)) << pos;
+               val <<= pos;
+               tmp &= ~mask;
+               val |= tmp;
+       }
 
-       return af9013_write_reg(state, reg, tmp);
+       return af9013_wr_reg(state, reg, val);
 }
 
-static int af9013_read_reg_bits(struct af9013_state *state, u16 reg, u8 pos,
-       u8 len, u8 *val)
+static int af9013_rd_reg_bits(struct af9013_state *state, u16 reg, int pos,
+       int len, u8 *val)
 {
        int ret;
        u8 tmp;
 
-       ret = af9013_read_reg(state, reg, &tmp);
+       ret = af9013_rd_reg(state, reg, &tmp);
        if (ret)
                return ret;
-       *val = (tmp >> pos) & regmask[len - 1];
+
+       *val = (tmp >> pos);
+       *val &= (0xff >> (8 - len));
+
        return 0;
 }
 
@@ -157,10 +219,13 @@ static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval)
        int ret;
        u8 pos;
        u16 addr;
-       deb_info("%s: gpio:%d gpioval:%02x\n", __func__, gpio, gpioval);
 
-/* GPIO0 & GPIO1 0xd735
-   GPIO2 & GPIO3 0xd736 */
+       dbg("%s: gpio=%d gpioval=%02x", __func__, gpio, gpioval);
+
+       /*
+        * GPIO0 & GPIO1 0xd735
+        * GPIO2 & GPIO3 0xd736
+        */
 
        switch (gpio) {
        case 0:
@@ -175,7 +240,7 @@ static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval)
        default:
                err("invalid gpio:%d\n", gpio);
                ret = -EINVAL;
-               goto error;
+               goto err;
        };
 
        switch (gpio) {
@@ -190,16 +255,21 @@ static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval)
                break;
        };
 
-       ret = af9013_write_reg_bits(state, addr, pos, 4, gpioval);
+       ret = af9013_wr_reg_bits(state, addr, pos, 4, gpioval);
+       if (ret)
+               goto err;
 
-error:
+       return ret;
+err:
+       dbg("%s: failed=%d", __func__, ret);
        return ret;
 }
 
 static u32 af913_div(u32 a, u32 b, u32 x)
 {
        u32 r = 0, c = 0, i;
-       deb_info("%s: a:%d b:%d x:%d\n", __func__, a, b, x);
+
+       dbg("%s: a=%d b=%d x=%d", __func__, a, b, x);
 
        if (a > b) {
                c = a / b;
@@ -216,182 +286,408 @@ static u32 af913_div(u32 a, u32 b, u32 x)
        }
        r = (c << (u32)x) + r;
 
-       deb_info("%s: a:%d b:%d x:%d r:%d r:%x\n", __func__, a, b, x, r, r);
+       dbg("%s: a=%d b=%d x=%d r=%x", __func__, a, b, x, r);
        return r;
 }
 
-static int af9013_set_coeff(struct af9013_state *state, fe_bandwidth_t bw)
+static int af9013_power_ctrl(struct af9013_state *state, u8 onoff)
 {
-       int ret, i, j, found;
-       deb_info("%s: adc_clock:%d bw:%d\n", __func__,
-               state->config.adc_clock, bw);
-
-       /* lookup coeff from table */
-       for (i = 0, found = 0; i < ARRAY_SIZE(coeff_table); i++) {
-               if (coeff_table[i].adc_clock == state->config.adc_clock &&
-                       coeff_table[i].bw == bw) {
-                       found = 1;
-                       break;
-               }
-       }
+       int ret, i;
+       u8 tmp;
 
-       if (!found) {
-               err("invalid bw or clock");
-               ret = -EINVAL;
-               goto error;
+       dbg("%s: onoff=%d", __func__, onoff);
+
+       /* enable reset */
+       ret = af9013_wr_reg_bits(state, 0xd417, 4, 1, 1);
+       if (ret)
+               goto err;
+
+       /* start reset mechanism */
+       ret = af9013_wr_reg(state, 0xaeff, 1);
+       if (ret)
+               goto err;
+
+       /* wait reset performs */
+       for (i = 0; i < 150; i++) {
+               ret = af9013_rd_reg_bits(state, 0xd417, 1, 1, &tmp);
+               if (ret)
+                       goto err;
+
+               if (tmp)
+                       break; /* reset done */
+
+               usleep_range(5000, 25000);
        }
 
-       deb_info("%s: coeff: ", __func__);
-       debug_dump(coeff_table[i].val, sizeof(coeff_table[i].val), deb_info);
+       if (!tmp)
+               return -ETIMEDOUT;
 
-       /* program */
-       for (j = 0; j < sizeof(coeff_table[i].val); j++) {
-               ret = af9013_write_reg(state, 0xae00 + j,
-                       coeff_table[i].val[j]);
+       if (onoff) {
+               /* clear reset */
+               ret = af9013_wr_reg_bits(state, 0xd417, 1, 1, 0);
                if (ret)
-                       break;
+                       goto err;
+
+               /* disable reset */
+               ret = af9013_wr_reg_bits(state, 0xd417, 4, 1, 0);
+
+               /* power on */
+               ret = af9013_wr_reg_bits(state, 0xd73a, 3, 1, 0);
+       } else {
+               /* power off */
+               ret = af9013_wr_reg_bits(state, 0xd73a, 3, 1, 1);
        }
 
-error:
+       return ret;
+err:
+       dbg("%s: failed=%d", __func__, ret);
        return ret;
 }
 
-static int af9013_set_adc_ctrl(struct af9013_state *state)
+static int af9013_statistics_ber_unc_start(struct dvb_frontend *fe)
 {
+       struct af9013_state *state = fe->demodulator_priv;
        int ret;
-       u8 buf[3], tmp, i;
-       u32 adc_cw;
 
-       deb_info("%s: adc_clock:%d\n", __func__, state->config.adc_clock);
+       dbg("%s", __func__);
 
-       /* adc frequency type */
-       switch (state->config.adc_clock) {
-       case 28800: /* 28.800 MHz */
-               tmp = 0;
-               break;
-       case 20480: /* 20.480 MHz */
-               tmp = 1;
+       /* reset and start BER counter */
+       ret = af9013_wr_reg_bits(state, 0xd391, 4, 1, 1);
+       if (ret)
+               goto err;
+
+       return ret;
+err:
+       dbg("%s: failed=%d", __func__, ret);
+       return ret;
+}
+
+static int af9013_statistics_ber_unc_result(struct dvb_frontend *fe)
+{
+       struct af9013_state *state = fe->demodulator_priv;
+       int ret;
+       u8 buf[5];
+
+       dbg("%s", __func__);
+
+       /* check if error bit count is ready */
+       ret = af9013_rd_reg_bits(state, 0xd391, 4, 1, &buf[0]);
+       if (ret)
+               goto err;
+
+       if (!buf[0]) {
+               dbg("%s: not ready", __func__);
+               return 0;
+       }
+
+       ret = af9013_rd_regs(state, 0xd387, buf, 5);
+       if (ret)
+               goto err;
+
+       state->ber = (buf[2] << 16) | (buf[1] << 8) | buf[0];
+       state->ucblocks += (buf[4] << 8) | buf[3];
+
+       return ret;
+err:
+       dbg("%s: failed=%d", __func__, ret);
+       return ret;
+}
+
+static int af9013_statistics_snr_start(struct dvb_frontend *fe)
+{
+       struct af9013_state *state = fe->demodulator_priv;
+       int ret;
+
+       dbg("%s", __func__);
+
+       /* start SNR meas */
+       ret = af9013_wr_reg_bits(state, 0xd2e1, 3, 1, 1);
+       if (ret)
+               goto err;
+
+       return ret;
+err:
+       dbg("%s: failed=%d", __func__, ret);
+       return ret;
+}
+
+static int af9013_statistics_snr_result(struct dvb_frontend *fe)
+{
+       struct af9013_state *state = fe->demodulator_priv;
+       int ret, i, len;
+       u8 buf[3], tmp;
+       u32 snr_val;
+       const struct af9013_snr *uninitialized_var(snr_lut);
+
+       dbg("%s", __func__);
+
+       /* check if SNR ready */
+       ret = af9013_rd_reg_bits(state, 0xd2e1, 3, 1, &tmp);
+       if (ret)
+               goto err;
+
+       if (!tmp) {
+               dbg("%s: not ready", __func__);
+               return 0;
+       }
+
+       /* read value */
+       ret = af9013_rd_regs(state, 0xd2e3, buf, 3);
+       if (ret)
+               goto err;
+
+       snr_val = (buf[2] << 16) | (buf[1] << 8) | buf[0];
+
+       /* read current modulation */
+       ret = af9013_rd_reg(state, 0xd3c1, &tmp);
+       if (ret)
+               goto err;
+
+       switch ((tmp >> 6) & 3) {
+       case 0:
+               len = ARRAY_SIZE(qpsk_snr_lut);
+               snr_lut = qpsk_snr_lut;
                break;
-       case 28000: /* 28.000 MHz */
-               tmp = 2;
+       case 1:
+               len = ARRAY_SIZE(qam16_snr_lut);
+               snr_lut = qam16_snr_lut;
                break;
-       case 25000: /* 25.000 MHz */
-               tmp = 3;
+       case 2:
+               len = ARRAY_SIZE(qam64_snr_lut);
+               snr_lut = qam64_snr_lut;
                break;
        default:
-               err("invalid xtal");
-               return -EINVAL;
+               goto err;
+               break;
        }
 
-       adc_cw = af913_div(state->config.adc_clock*1000, 1000000ul, 19ul);
+       for (i = 0; i < len; i++) {
+               tmp = snr_lut[i].snr;
 
-       buf[0] = (u8) ((adc_cw & 0x000000ff));
-       buf[1] = (u8) ((adc_cw & 0x0000ff00) >> 8);
-       buf[2] = (u8) ((adc_cw & 0x00ff0000) >> 16);
+               if (snr_val < snr_lut[i].val)
+                       break;
+       }
+       state->snr = tmp * 10; /* dB/10 */
 
-       deb_info("%s: adc_cw:", __func__);
-       debug_dump(buf, sizeof(buf), deb_info);
+       return ret;
+err:
+       dbg("%s: failed=%d", __func__, ret);
+       return ret;
+}
 
-       /* program */
-       for (i = 0; i < sizeof(buf); i++) {
-               ret = af9013_write_reg(state, 0xd180 + i, buf[i]);
-               if (ret)
-                       goto error;
-       }
-       ret = af9013_write_reg_bits(state, 0x9bd2, 0, 4, tmp);
-error:
+static int af9013_statistics_signal_strength(struct dvb_frontend *fe)
+{
+       struct af9013_state *state = fe->demodulator_priv;
+       int ret = 0;
+       u8 buf[2], rf_gain, if_gain;
+       int signal_strength;
+
+       dbg("%s", __func__);
+
+       if (!state->signal_strength_en)
+               return 0;
+
+       ret = af9013_rd_regs(state, 0xd07c, buf, 2);
+       if (ret)
+               goto err;
+
+       rf_gain = buf[0];
+       if_gain = buf[1];
+
+       signal_strength = (0xffff / \
+               (9 * (state->rf_50 + state->if_50) - \
+               11 * (state->rf_80 + state->if_80))) * \
+               (10 * (rf_gain + if_gain) - \
+               11 * (state->rf_80 + state->if_80));
+       if (signal_strength < 0)
+               signal_strength = 0;
+       else if (signal_strength > 0xffff)
+               signal_strength = 0xffff;
+
+       state->signal_strength = signal_strength;
+
+       return ret;
+err:
+       dbg("%s: failed=%d", __func__, ret);
        return ret;
 }
 
-static int af9013_set_freq_ctrl(struct af9013_state *state,
-       struct dvb_frontend *fe)
+static void af9013_statistics_work(struct work_struct *work)
 {
        int ret;
-       u16 addr;
-       u8 buf[3], i, j;
-       u32 adc_freq, freq_cw;
-       s8 bfs_spec_inv;
-       int if_sample_freq;
-
-       for (j = 0; j < 3; j++) {
-               if (j == 0) {
-                       addr = 0xd140; /* fcw normal */
-                       bfs_spec_inv = state->config.rf_spec_inv ? -1 : 1;
-               } else if (j == 1) {
-                       addr = 0x9be7; /* fcw dummy ram */
-                       bfs_spec_inv = state->config.rf_spec_inv ? -1 : 1;
-               } else {
-                       addr = 0x9bea; /* fcw inverted */
-                       bfs_spec_inv = state->config.rf_spec_inv ? 1 : -1;
+       struct af9013_state *state = container_of(work,
+               struct af9013_state, statistics_work.work);
+       unsigned int next_msec;
+
+       /* update only signal strength when demod is not locked */
+       if (!(state->fe_status & FE_HAS_LOCK)) {
+               state->statistics_step = 0;
+               state->ber = 0;
+               state->snr = 0;
+       }
+
+       switch (state->statistics_step) {
+       default:
+               state->statistics_step = 0;
+       case 0:
+               ret = af9013_statistics_signal_strength(&state->fe);
+               state->statistics_step++;
+               next_msec = 300;
+               break;
+       case 1:
+               ret = af9013_statistics_snr_start(&state->fe);
+               state->statistics_step++;
+               next_msec = 200;
+               break;
+       case 2:
+               ret = af9013_statistics_ber_unc_start(&state->fe);
+               state->statistics_step++;
+               next_msec = 1000;
+               break;
+       case 3:
+               ret = af9013_statistics_snr_result(&state->fe);
+               state->statistics_step++;
+               next_msec = 400;
+               break;
+       case 4:
+               ret = af9013_statistics_ber_unc_result(&state->fe);
+               state->statistics_step++;
+               next_msec = 100;
+               break;
+       }
+
+       schedule_delayed_work(&state->statistics_work,
+               msecs_to_jiffies(next_msec));
+
+       return;
+}
+
+static int af9013_get_tune_settings(struct dvb_frontend *fe,
+       struct dvb_frontend_tune_settings *fesettings)
+{
+       fesettings->min_delay_ms = 800;
+       fesettings->step_size = 0;
+       fesettings->max_drift = 0;
+
+       return 0;
+}
+
+static int af9013_set_frontend(struct dvb_frontend *fe,
+       struct dvb_frontend_parameters *p)
+{
+       struct af9013_state *state = fe->demodulator_priv;
+       struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+       int ret, i, sampling_freq;
+       bool auto_mode, spec_inv;
+       u8 buf[6];
+       u32 if_frequency, freq_cw;
+
+       dbg("%s: frequency=%d bandwidth_hz=%d", __func__,
+               c->frequency, c->bandwidth_hz);
+
+       /* program tuner */
+       if (fe->ops.tuner_ops.set_params)
+               fe->ops.tuner_ops.set_params(fe, p);
+
+       /* program CFOE coefficients */
+       if (c->bandwidth_hz != state->bandwidth_hz) {
+               for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) {
+                       if (coeff_lut[i].clock == state->config.clock &&
+                               coeff_lut[i].bandwidth_hz == c->bandwidth_hz) {
+                               break;
+                       }
                }
 
-               adc_freq = state->config.adc_clock * 1000;
+               ret = af9013_wr_regs(state, 0xae00, coeff_lut[i].val,
+                       sizeof(coeff_lut[i].val));
+       }
 
+       /* program frequency control */
+       if (c->bandwidth_hz != state->bandwidth_hz || state->first_tune) {
                /* get used IF frequency */
                if (fe->ops.tuner_ops.get_if_frequency)
-                       fe->ops.tuner_ops.get_if_frequency(fe, &if_sample_freq);
+                       fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency);
                else
-                       if_sample_freq = state->config.tuner_if * 1000;
+                       if_frequency = state->config.if_frequency;
 
-               while (if_sample_freq > (adc_freq / 2))
-                       if_sample_freq = if_sample_freq - adc_freq;
+               sampling_freq = if_frequency;
 
-               if (if_sample_freq >= 0)
-                       bfs_spec_inv = bfs_spec_inv * (-1);
-               else
-                       if_sample_freq = if_sample_freq * (-1);
+               while (sampling_freq > (state->config.clock / 2))
+                       sampling_freq -= state->config.clock;
 
-               freq_cw = af913_div(if_sample_freq, adc_freq, 23ul);
+               if (sampling_freq < 0) {
+                       sampling_freq *= -1;
+                       spec_inv = state->config.spec_inv;
+               } else {
+                       spec_inv = !state->config.spec_inv;
+               }
 
-               if (bfs_spec_inv == -1)
-                       freq_cw = 0x00800000 - freq_cw;
+               freq_cw = af913_div(sampling_freq, state->config.clock, 23);
 
-               buf[0] = (u8) ((freq_cw & 0x000000ff));
-               buf[1] = (u8) ((freq_cw & 0x0000ff00) >> 8);
-               buf[2] = (u8) ((freq_cw & 0x007f0000) >> 16);
+               if (spec_inv)
+                       freq_cw = 0x800000 - freq_cw;
 
+               buf[0] = (freq_cw >>  0) & 0xff;
+               buf[1] = (freq_cw >>  8) & 0xff;
+               buf[2] = (freq_cw >> 16) & 0x7f;
 
-               deb_info("%s: freq_cw:", __func__);
-               debug_dump(buf, sizeof(buf), deb_info);
+               freq_cw = 0x800000 - freq_cw;
 
-               /* program */
-               for (i = 0; i < sizeof(buf); i++) {
-                       ret = af9013_write_reg(state, addr++, buf[i]);
-                       if (ret)
-                               goto error;
-               }
+               buf[3] = (freq_cw >>  0) & 0xff;
+               buf[4] = (freq_cw >>  8) & 0xff;
+               buf[5] = (freq_cw >> 16) & 0x7f;
+
+               ret = af9013_wr_regs(state, 0xd140, buf, 3);
+               if (ret)
+                       goto err;
+
+               ret = af9013_wr_regs(state, 0x9be7, buf, 6);
+               if (ret)
+                       goto err;
        }
-error:
-       return ret;
-}
 
-static int af9013_set_ofdm_params(struct af9013_state *state,
-       struct dvb_ofdm_parameters *params, u8 *auto_mode)
-{
-       int ret;
-       u8 i, buf[3] = {0, 0, 0};
-       *auto_mode = 0; /* set if parameters are requested to auto set */
+       /* clear TPS lock flag */
+       ret = af9013_wr_reg_bits(state, 0xd330, 3, 1, 1);
+       if (ret)
+               goto err;
 
-       /* Try auto-detect transmission parameters in case of AUTO requested or
-          garbage parameters given by application for compatibility.
-          MPlayer seems to provide garbage parameters currently. */
+       /* clear MPEG2 lock flag */
+       ret = af9013_wr_reg_bits(state, 0xd507, 6, 1, 0);
+       if (ret)
+               goto err;
 
-       switch (params->transmission_mode) {
+       /* empty channel function */
+       ret = af9013_wr_reg_bits(state, 0x9bfe, 0, 1, 0);
+       if (ret)
+               goto err;
+
+       /* empty DVB-T channel function */
+       ret = af9013_wr_reg_bits(state, 0x9bc2, 0, 1, 0);
+       if (ret)
+               goto err;
+
+       /* transmission parameters */
+       auto_mode = false;
+       memset(buf, 0, 3);
+
+       switch (c->transmission_mode) {
        case TRANSMISSION_MODE_AUTO:
-               *auto_mode = 1;
+               auto_mode = 1;
+               break;
        case TRANSMISSION_MODE_2K:
                break;
        case TRANSMISSION_MODE_8K:
                buf[0] |= (1 << 0);
                break;
        default:
-               deb_info("%s: invalid transmission_mode\n", __func__);
-               *auto_mode = 1;
+               dbg("%s: invalid transmission_mode", __func__);
+               auto_mode = 1;
        }
 
-       switch (params->guard_interval) {
+       switch (c->guard_interval) {
        case GUARD_INTERVAL_AUTO:
-               *auto_mode = 1;
+               auto_mode = 1;
+               break;
        case GUARD_INTERVAL_1_32:
                break;
        case GUARD_INTERVAL_1_16:
@@ -404,13 +700,14 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
                buf[0] |= (3 << 2);
                break;
        default:
-               deb_info("%s: invalid guard_interval\n", __func__);
-               *auto_mode = 1;
+               dbg("%s: invalid guard_interval", __func__);
+               auto_mode = 1;
        }
 
-       switch (params->hierarchy_information) {
+       switch (c->hierarchy) {
        case HIERARCHY_AUTO:
-               *auto_mode = 1;
+               auto_mode = 1;
+               break;
        case HIERARCHY_NONE:
                break;
        case HIERARCHY_1:
@@ -423,13 +720,14 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
                buf[0] |= (3 << 4);
                break;
        default:
-               deb_info("%s: invalid hierarchy_information\n", __func__);
-               *auto_mode = 1;
+               dbg("%s: invalid hierarchy", __func__);
+               auto_mode = 1;
        };
 
-       switch (params->constellation) {
+       switch (c->modulation) {
        case QAM_AUTO:
-               *auto_mode = 1;
+               auto_mode = 1;
+               break;
        case QPSK:
                break;
        case QAM_16:
@@ -439,16 +737,17 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
                buf[1] |= (2 << 6);
                break;
        default:
-               deb_info("%s: invalid constellation\n", __func__);
-               *auto_mode = 1;
+               dbg("%s: invalid modulation", __func__);
+               auto_mode = 1;
        }
 
        /* Use HP. How and which case we can switch to LP? */
        buf[1] |= (1 << 4);
 
-       switch (params->code_rate_HP) {
+       switch (c->code_rate_HP) {
        case FEC_AUTO:
-               *auto_mode = 1;
+               auto_mode = 1;
+               break;
        case FEC_1_2:
                break;
        case FEC_2_3:
@@ -464,16 +763,14 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
                buf[2] |= (4 << 0);
                break;
        default:
-               deb_info("%s: invalid code_rate_HP\n", __func__);
-               *auto_mode = 1;
+               dbg("%s: invalid code_rate_HP", __func__);
+               auto_mode = 1;
        }
 
-       switch (params->code_rate_LP) {
+       switch (c->code_rate_LP) {
        case FEC_AUTO:
-       /* if HIERARCHY_NONE and FEC_NONE then LP FEC is set to FEC_AUTO
-          by dvb_frontend.c for compatibility */
-               if (params->hierarchy_information != HIERARCHY_NONE)
-                       *auto_mode = 1;
+               auto_mode = 1;
+               break;
        case FEC_1_2:
                break;
        case FEC_2_3:
@@ -489,183 +786,63 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
                buf[2] |= (4 << 3);
                break;
        case FEC_NONE:
-               if (params->hierarchy_information == HIERARCHY_AUTO)
-                       break;
+               break;
        default:
-               deb_info("%s: invalid code_rate_LP\n", __func__);
-               *auto_mode = 1;
+               dbg("%s: invalid code_rate_LP", __func__);
+               auto_mode = 1;
        }
 
-       switch (params->bandwidth) {
-       case BANDWIDTH_6_MHZ:
+       switch (c->bandwidth_hz) {
+       case 6000000:
                break;
-       case BANDWIDTH_7_MHZ:
+       case 7000000:
                buf[1] |= (1 << 2);
                break;
-       case BANDWIDTH_8_MHZ:
+       case 8000000:
                buf[1] |= (2 << 2);
                break;
        default:
-               deb_info("%s: invalid bandwidth\n", __func__);
-               buf[1] |= (2 << 2); /* cannot auto-detect BW, try 8 MHz */
-       }
-
-       /* program */
-       for (i = 0; i < sizeof(buf); i++) {
-               ret = af9013_write_reg(state, 0xd3c0 + i, buf[i]);
-               if (ret)
-                       break;
+               dbg("%s: invalid bandwidth_hz", __func__);
+               ret = -EINVAL;
+               goto err;
        }
 
-       return ret;
-}
-
-static int af9013_reset(struct af9013_state *state, u8 sleep)
-{
-       int ret;
-       u8 tmp, i;
-       deb_info("%s\n", __func__);
-
-       /* enable OFDM reset */
-       ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 1);
-       if (ret)
-               goto error;
-
-       /* start reset mechanism */
-       ret = af9013_write_reg(state, 0xaeff, 1);
+       ret = af9013_wr_regs(state, 0xd3c0, buf, 3);
        if (ret)
-               goto error;
+               goto err;
 
-       /* reset is done when bit 1 is set */
-       for (i = 0; i < 150; i++) {
-               ret = af9013_read_reg_bits(state, 0xd417, 1, 1, &tmp);
-               if (ret)
-                       goto error;
-               if (tmp)
-                       break; /* reset done */
-               msleep(10);
-       }
-       if (!tmp)
-               return -ETIMEDOUT;
-
-       /* don't clear reset when going to sleep */
-       if (!sleep) {
-               /* clear OFDM reset */
-               ret = af9013_write_reg_bits(state, 0xd417, 1, 1, 0);
+       if (auto_mode) {
+               /* clear easy mode flag */
+               ret = af9013_wr_reg(state, 0xaefd, 0);
                if (ret)
-                       goto error;
-
-               /* disable OFDM reset */
-               ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 0);
-       }
-error:
-       return ret;
-}
+                       goto err;
 
-static int af9013_power_ctrl(struct af9013_state *state, u8 onoff)
-{
-       int ret;
-       deb_info("%s: onoff:%d\n", __func__, onoff);
-
-       if (onoff) {
-               /* power on */
-               ret = af9013_write_reg_bits(state, 0xd73a, 3, 1, 0);
-               if (ret)
-                       goto error;
-               ret = af9013_write_reg_bits(state, 0xd417, 1, 1, 0);
-               if (ret)
-                       goto error;
-               ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 0);
+               dbg("%s: auto params", __func__);
        } else {
-               /* power off */
-               ret = af9013_reset(state, 1);
+               /* set easy mode flag */
+               ret = af9013_wr_reg(state, 0xaefd, 1);
                if (ret)
-                       goto error;
-               ret = af9013_write_reg_bits(state, 0xd73a, 3, 1, 1);
-       }
-error:
-       return ret;
-}
-
-static int af9013_lock_led(struct af9013_state *state, u8 onoff)
-{
-       deb_info("%s: onoff:%d\n", __func__, onoff);
-
-       return af9013_write_reg_bits(state, 0xd730, 0, 1, onoff);
-}
-
-static int af9013_set_frontend(struct dvb_frontend *fe,
-       struct dvb_frontend_parameters *params)
-{
-       struct af9013_state *state = fe->demodulator_priv;
-       int ret;
-       u8 auto_mode; /* auto set TPS */
-
-       deb_info("%s: freq:%d bw:%d\n", __func__, params->frequency,
-               params->u.ofdm.bandwidth);
-
-       state->frequency = params->frequency;
-
-       /* program tuner */
-       if (fe->ops.tuner_ops.set_params)
-               fe->ops.tuner_ops.set_params(fe, params);
-
-       /* program CFOE coefficients */
-       ret = af9013_set_coeff(state, params->u.ofdm.bandwidth);
-       if (ret)
-               goto error;
-
-       /* program frequency control */
-       ret = af9013_set_freq_ctrl(state, fe);
-       if (ret)
-               goto error;
-
-       /* clear TPS lock flag (inverted flag) */
-       ret = af9013_write_reg_bits(state, 0xd330, 3, 1, 1);
-       if (ret)
-               goto error;
-
-       /* clear MPEG2 lock flag */
-       ret = af9013_write_reg_bits(state, 0xd507, 6, 1, 0);
-       if (ret)
-               goto error;
-
-       /* empty channel function */
-       ret = af9013_write_reg_bits(state, 0x9bfe, 0, 1, 0);
-       if (ret)
-               goto error;
-
-       /* empty DVB-T channel function */
-       ret = af9013_write_reg_bits(state, 0x9bc2, 0, 1, 0);
-       if (ret)
-               goto error;
+                       goto err;
 
-       /* program TPS and bandwidth, check if auto mode needed */
-       ret = af9013_set_ofdm_params(state, &params->u.ofdm, &auto_mode);
-       if (ret)
-               goto error;
-
-       if (auto_mode) {
-               /* clear easy mode flag */
-               ret = af9013_write_reg(state, 0xaefd, 0);
-               deb_info("%s: auto TPS\n", __func__);
-       } else {
-               /* set easy mode flag */
-               ret = af9013_write_reg(state, 0xaefd, 1);
+               ret = af9013_wr_reg(state, 0xaefe, 0);
                if (ret)
-                       goto error;
-               ret = af9013_write_reg(state, 0xaefe, 0);
-               deb_info("%s: manual TPS\n", __func__);
+                       goto err;
+
+               dbg("%s: manual params", __func__);
        }
-       if (ret)
-               goto error;
 
-       /* everything is set, lets try to receive channel - OFSM GO! */
-       ret = af9013_write_reg(state, 0xffff, 0);
+       /* tune */
+       ret = af9013_wr_reg(state, 0xffff, 0);
        if (ret)
-               goto error;
+               goto err;
+
+       state->bandwidth_hz = c->bandwidth_hz;
+       state->set_frontend_jiffies = jiffies;
+       state->first_tune = false;
 
-error:
+       return ret;
+err:
+       dbg("%s: failed=%d", __func__, ret);
        return ret;
 }
 
@@ -673,525 +850,310 @@ static int af9013_get_frontend(struct dvb_frontend *fe,
        struct dvb_frontend_parameters *p)
 {
        struct af9013_state *state = fe->demodulator_priv;
+       struct dtv_frontend_properties *c = &fe->dtv_property_cache;
        int ret;
-       u8 i, buf[3];
-       deb_info("%s\n", __func__);
+       u8 buf[3];
 
-       /* read TPS registers */
-       for (i = 0; i < 3; i++) {
-               ret = af9013_read_reg(state, 0xd3c0 + i, &buf[i]);
-               if (ret)
-                       goto error;
-       }
+       dbg("%s", __func__);
+
+       ret = af9013_rd_regs(state, 0xd3c0, buf, 3);
+       if (ret)
+               goto err;
 
        switch ((buf[1] >> 6) & 3) {
        case 0:
-               p->u.ofdm.constellation = QPSK;
+               c->modulation = QPSK;
                break;
        case 1:
-               p->u.ofdm.constellation = QAM_16;
+               c->modulation = QAM_16;
                break;
        case 2:
-               p->u.ofdm.constellation = QAM_64;
+               c->modulation = QAM_64;
                break;
        }
 
        switch ((buf[0] >> 0) & 3) {
        case 0:
-               p->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K;
+               c->transmission_mode = TRANSMISSION_MODE_2K;
                break;
        case 1:
-               p->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K;
+               c->transmission_mode = TRANSMISSION_MODE_8K;
        }
 
        switch ((buf[0] >> 2) & 3) {
        case 0:
-               p->u.ofdm.guard_interval = GUARD_INTERVAL_1_32;
+               c->transmission_mode = GUARD_INTERVAL_1_32;
                break;
        case 1:
-               p->u.ofdm.guard_interval = GUARD_INTERVAL_1_16;
+               c->transmission_mode = GUARD_INTERVAL_1_16;
                break;
        case 2:
-               p->u.ofdm.guard_interval = GUARD_INTERVAL_1_8;
+               c->transmission_mode = GUARD_INTERVAL_1_8;
                break;
        case 3:
-               p->u.ofdm.guard_interval = GUARD_INTERVAL_1_4;
+               c->transmission_mode = GUARD_INTERVAL_1_4;
                break;
        }
 
        switch ((buf[0] >> 4) & 7) {
        case 0:
-               p->u.ofdm.hierarchy_information = HIERARCHY_NONE;
+               c->hierarchy = HIERARCHY_NONE;
                break;
        case 1:
-               p->u.ofdm.hierarchy_information = HIERARCHY_1;
+               c->hierarchy = HIERARCHY_1;
                break;
        case 2:
-               p->u.ofdm.hierarchy_information = HIERARCHY_2;
+               c->hierarchy = HIERARCHY_2;
                break;
        case 3:
-               p->u.ofdm.hierarchy_information = HIERARCHY_4;
+               c->hierarchy = HIERARCHY_4;
                break;
        }
 
        switch ((buf[2] >> 0) & 7) {
        case 0:
-               p->u.ofdm.code_rate_HP = FEC_1_2;
+               c->code_rate_HP = FEC_1_2;
                break;
        case 1:
-               p->u.ofdm.code_rate_HP = FEC_2_3;
-               break;
-       case 2:
-               p->u.ofdm.code_rate_HP = FEC_3_4;
-               break;
-       case 3:
-               p->u.ofdm.code_rate_HP = FEC_5_6;
-               break;
-       case 4:
-               p->u.ofdm.code_rate_HP = FEC_7_8;
-               break;
-       }
-
-       switch ((buf[2] >> 3) & 7) {
-       case 0:
-               p->u.ofdm.code_rate_LP = FEC_1_2;
-               break;
-       case 1:
-               p->u.ofdm.code_rate_LP = FEC_2_3;
-               break;
-       case 2:
-               p->u.ofdm.code_rate_LP = FEC_3_4;
-               break;
-       case 3:
-               p->u.ofdm.code_rate_LP = FEC_5_6;
-               break;
-       case 4:
-               p->u.ofdm.code_rate_LP = FEC_7_8;
-               break;
-       }
-
-       switch ((buf[1] >> 2) & 3) {
-       case 0:
-               p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
-               break;
-       case 1:
-               p->u.ofdm.bandwidth = BANDWIDTH_7_MHZ;
-               break;
-       case 2:
-               p->u.ofdm.bandwidth = BANDWIDTH_8_MHZ;
-               break;
-       }
-
-       p->inversion = INVERSION_AUTO;
-       p->frequency = state->frequency;
-
-error:
-       return ret;
-}
-
-static int af9013_update_ber_unc(struct dvb_frontend *fe)
-{
-       struct af9013_state *state = fe->demodulator_priv;
-       int ret;
-       u8 buf[3], i;
-       u32 error_bit_count = 0;
-       u32 total_bit_count = 0;
-       u32 abort_packet_count = 0;
-
-       state->ber = 0;
-
-       /* check if error bit count is ready */
-       ret = af9013_read_reg_bits(state, 0xd391, 4, 1, &buf[0]);
-       if (ret)
-               goto error;
-       if (!buf[0])
-               goto exit;
-
-       /* get RSD packet abort count */
-       for (i = 0; i < 2; i++) {
-               ret = af9013_read_reg(state, 0xd38a + i, &buf[i]);
-               if (ret)
-                       goto error;
-       }
-       abort_packet_count = (buf[1] << 8) + buf[0];
-
-       /* get error bit count */
-       for (i = 0; i < 3; i++) {
-               ret = af9013_read_reg(state, 0xd387 + i, &buf[i]);
-               if (ret)
-                       goto error;
-       }
-       error_bit_count = (buf[2] << 16) + (buf[1] << 8) + buf[0];
-       error_bit_count = error_bit_count - abort_packet_count * 8 * 8;
-
-       /* get used RSD counting period (10000 RSD packets used) */
-       for (i = 0; i < 2; i++) {
-               ret = af9013_read_reg(state, 0xd385 + i, &buf[i]);
-               if (ret)
-                       goto error;
-       }
-       total_bit_count = (buf[1] << 8) + buf[0];
-       total_bit_count = total_bit_count - abort_packet_count;
-       total_bit_count = total_bit_count * 204 * 8;
-
-       if (total_bit_count)
-               state->ber = error_bit_count * 1000000000 / total_bit_count;
-
-       state->ucblocks += abort_packet_count;
-
-       deb_info("%s: err bits:%d total bits:%d abort count:%d\n", __func__,
-               error_bit_count, total_bit_count, abort_packet_count);
-
-       /* set BER counting range */
-       ret = af9013_write_reg(state, 0xd385, 10000 & 0xff);
-       if (ret)
-               goto error;
-       ret = af9013_write_reg(state, 0xd386, 10000 >> 8);
-       if (ret)
-               goto error;
-       /* reset and start BER counter */
-       ret = af9013_write_reg_bits(state, 0xd391, 4, 1, 1);
-       if (ret)
-               goto error;
-
-exit:
-error:
-       return ret;
-}
-
-static int af9013_update_snr(struct dvb_frontend *fe)
-{
-       struct af9013_state *state = fe->demodulator_priv;
-       int ret;
-       u8 buf[3], i, len;
-       u32 quant = 0;
-       struct snr_table *uninitialized_var(snr_table);
-
-       /* check if quantizer ready (for snr) */
-       ret = af9013_read_reg_bits(state, 0xd2e1, 3, 1, &buf[0]);
-       if (ret)
-               goto error;
-       if (buf[0]) {
-               /* quantizer ready - read it */
-               for (i = 0; i < 3; i++) {
-                       ret = af9013_read_reg(state, 0xd2e3 + i, &buf[i]);
-                       if (ret)
-                               goto error;
-               }
-               quant = (buf[2] << 16) + (buf[1] << 8) + buf[0];
-
-               /* read current constellation */
-               ret = af9013_read_reg(state, 0xd3c1, &buf[0]);
-               if (ret)
-                       goto error;
-
-               switch ((buf[0] >> 6) & 3) {
-               case 0:
-                       len = ARRAY_SIZE(qpsk_snr_table);
-                       snr_table = qpsk_snr_table;
-                       break;
-               case 1:
-                       len = ARRAY_SIZE(qam16_snr_table);
-                       snr_table = qam16_snr_table;
-                       break;
-               case 2:
-                       len = ARRAY_SIZE(qam64_snr_table);
-                       snr_table = qam64_snr_table;
-                       break;
-               default:
-                       len = 0;
-                       break;
-               }
-
-               if (len) {
-                       for (i = 0; i < len; i++) {
-                               if (quant < snr_table[i].val) {
-                                       state->snr = snr_table[i].snr * 10;
-                                       break;
-                               }
-                       }
-               }
-
-               /* set quantizer super frame count */
-               ret = af9013_write_reg(state, 0xd2e2, 1);
-               if (ret)
-                       goto error;
-
-               /* check quantizer availability */
-               for (i = 0; i < 10; i++) {
-                       msleep(10);
-                       ret = af9013_read_reg_bits(state, 0xd2e6, 0, 1,
-                               &buf[0]);
-                       if (ret)
-                               goto error;
-                       if (!buf[0])
-                               break;
-               }
-
-               /* reset quantizer */
-               ret = af9013_write_reg_bits(state, 0xd2e1, 3, 1, 1);
-               if (ret)
-                       goto error;
+               c->code_rate_HP = FEC_2_3;
+               break;
+       case 2:
+               c->code_rate_HP = FEC_3_4;
+               break;
+       case 3:
+               c->code_rate_HP = FEC_5_6;
+               break;
+       case 4:
+               c->code_rate_HP = FEC_7_8;
+               break;
        }
 
-error:
-       return ret;
-}
-
-static int af9013_update_signal_strength(struct dvb_frontend *fe)
-{
-       struct af9013_state *state = fe->demodulator_priv;
-       int ret = 0;
-       u8 rf_gain, if_gain;
-       int signal_strength;
-
-       deb_info("%s\n", __func__);
+       switch ((buf[2] >> 3) & 7) {
+       case 0:
+               c->code_rate_LP = FEC_1_2;
+               break;
+       case 1:
+               c->code_rate_LP = FEC_2_3;
+               break;
+       case 2:
+               c->code_rate_LP = FEC_3_4;
+               break;
+       case 3:
+               c->code_rate_LP = FEC_5_6;
+               break;
+       case 4:
+               c->code_rate_LP = FEC_7_8;
+               break;
+       }
 
-       if (state->signal_strength_en) {
-               ret = af9013_read_reg(state, 0xd07c, &rf_gain);
-               if (ret)
-                       goto error;
-               ret = af9013_read_reg(state, 0xd07d, &if_gain);
-               if (ret)
-                       goto error;
-               signal_strength = (0xffff / \
-                       (9 * (state->rf_50 + state->if_50) - \
-                       11 * (state->rf_80 + state->if_80))) * \
-                       (10 * (rf_gain + if_gain) - \
-                       11 * (state->rf_80 + state->if_80));
-               if (signal_strength < 0)
-                       signal_strength = 0;
-               else if (signal_strength > 0xffff)
-                       signal_strength = 0xffff;
-
-               state->signal_strength = signal_strength;
-       } else {
-               state->signal_strength = 0;
+       switch ((buf[1] >> 2) & 3) {
+       case 0:
+               c->bandwidth_hz = 6000000;
+               break;
+       case 1:
+               c->bandwidth_hz = 7000000;
+               break;
+       case 2:
+               c->bandwidth_hz = 8000000;
+               break;
        }
 
-error:
        return ret;
-}
-
-static int af9013_update_statistics(struct dvb_frontend *fe)
-{
-       struct af9013_state *state = fe->demodulator_priv;
-       int ret;
-
-       if (time_before(jiffies, state->next_statistics_check))
-               return 0;
-
-       /* set minimum statistic update interval */
-       state->next_statistics_check = jiffies + msecs_to_jiffies(1200);
-
-       ret = af9013_update_signal_strength(fe);
-       if (ret)
-               goto error;
-       ret = af9013_update_snr(fe);
-       if (ret)
-               goto error;
-       ret = af9013_update_ber_unc(fe);
-       if (ret)
-               goto error;
-
-error:
+err:
+       dbg("%s: failed=%d", __func__, ret);
        return ret;
 }
 
-static int af9013_get_tune_settings(struct dvb_frontend *fe,
-       struct dvb_frontend_tune_settings *fesettings)
-{
-       fesettings->min_delay_ms = 800;
-       fesettings->step_size = 0;
-       fesettings->max_drift = 0;
-
-       return 0;
-}
-
 static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status)
 {
        struct af9013_state *state = fe->demodulator_priv;
-       int ret = 0;
+       int ret;
        u8 tmp;
-       *status = 0;
+
+       /*
+        * Return status from the cache if it is younger than 2000ms with the
+        * exception of last tune is done during 4000ms.
+        */
+       if (time_is_after_jiffies(
+               state->read_status_jiffies + msecs_to_jiffies(2000)) &&
+               time_is_before_jiffies(
+               state->set_frontend_jiffies + msecs_to_jiffies(4000))
+       ) {
+                       *status = state->fe_status;
+                       return 0;
+       } else {
+               *status = 0;
+       }
 
        /* MPEG2 lock */
-       ret = af9013_read_reg_bits(state, 0xd507, 6, 1, &tmp);
+       ret = af9013_rd_reg_bits(state, 0xd507, 6, 1, &tmp);
        if (ret)
-               goto error;
+               goto err;
+
        if (tmp)
                *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI |
                        FE_HAS_SYNC | FE_HAS_LOCK;
 
        if (!*status) {
                /* TPS lock */
-               ret = af9013_read_reg_bits(state, 0xd330, 3, 1, &tmp);
+               ret = af9013_rd_reg_bits(state, 0xd330, 3, 1, &tmp);
                if (ret)
-                       goto error;
+                       goto err;
+
                if (tmp)
                        *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
                                FE_HAS_VITERBI;
        }
 
-       if (!*status) {
-               /* CFO lock */
-               ret = af9013_read_reg_bits(state, 0xd333, 7, 1, &tmp);
-               if (ret)
-                       goto error;
-               if (tmp)
-                       *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
-       }
-
-       if (!*status) {
-               /* SFOE lock */
-               ret = af9013_read_reg_bits(state, 0xd334, 6, 1, &tmp);
-               if (ret)
-                       goto error;
-               if (tmp)
-                       *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
-       }
-
-       if (!*status) {
-               /* AGC lock */
-               ret = af9013_read_reg_bits(state, 0xd1a0, 6, 1, &tmp);
-               if (ret)
-                       goto error;
-               if (tmp)
-                       *status |= FE_HAS_SIGNAL;
-       }
-
-       ret = af9013_update_statistics(fe);
+       state->fe_status = *status;
+       state->read_status_jiffies = jiffies;
 
-error:
+       return ret;
+err:
+       dbg("%s: failed=%d", __func__, ret);
        return ret;
 }
 
-
-static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber)
+static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr)
 {
        struct af9013_state *state = fe->demodulator_priv;
-       int ret;
-       ret = af9013_update_statistics(fe);
-       *ber = state->ber;
-       return ret;
+       *snr = state->snr;
+       return 0;
 }
 
 static int af9013_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
 {
        struct af9013_state *state = fe->demodulator_priv;
-       int ret;
-       ret = af9013_update_statistics(fe);
        *strength = state->signal_strength;
-       return ret;
+       return 0;
 }
 
-static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr)
+static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber)
 {
        struct af9013_state *state = fe->demodulator_priv;
-       int ret;
-       ret = af9013_update_statistics(fe);
-       *snr = state->snr;
-       return ret;
+       *ber = state->ber;
+       return 0;
 }
 
 static int af9013_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
 {
        struct af9013_state *state = fe->demodulator_priv;
-       int ret;
-       ret = af9013_update_statistics(fe);
        *ucblocks = state->ucblocks;
-       return ret;
-}
-
-static int af9013_sleep(struct dvb_frontend *fe)
-{
-       struct af9013_state *state = fe->demodulator_priv;
-       int ret;
-       deb_info("%s\n", __func__);
-
-       ret = af9013_lock_led(state, 0);
-       if (ret)
-               goto error;
-
-       ret = af9013_power_ctrl(state, 0);
-error:
-       return ret;
+       return 0;
 }
 
 static int af9013_init(struct dvb_frontend *fe)
 {
        struct af9013_state *state = fe->demodulator_priv;
        int ret, i, len;
-       u8 tmp0, tmp1;
-       struct regdesc *init;
-       deb_info("%s\n", __func__);
+       u8 buf[3], tmp;
+       u32 adc_cw;
+       const struct af9013_reg_bit *init;
 
-       /* reset OFDM */
-       ret = af9013_reset(state, 0);
-       if (ret)
-               goto error;
+       dbg("%s", __func__);
 
        /* power on */
        ret = af9013_power_ctrl(state, 1);
        if (ret)
-               goto error;
+               goto err;
 
        /* enable ADC */
-       ret = af9013_write_reg(state, 0xd73a, 0xa4);
+       ret = af9013_wr_reg(state, 0xd73a, 0xa4);
        if (ret)
-               goto error;
+               goto err;
 
        /* write API version to firmware */
-       for (i = 0; i < sizeof(state->config.api_version); i++) {
-               ret = af9013_write_reg(state, 0x9bf2 + i,
-                       state->config.api_version[i]);
-               if (ret)
-                       goto error;
-       }
+       ret = af9013_wr_regs(state, 0x9bf2, state->config.api_version, 4);
+       if (ret)
+               goto err;
 
        /* program ADC control */
-       ret = af9013_set_adc_ctrl(state);
+       switch (state->config.clock) {
+       case 28800000: /* 28.800 MHz */
+               tmp = 0;
+               break;
+       case 20480000: /* 20.480 MHz */
+               tmp = 1;
+               break;
+       case 28000000: /* 28.000 MHz */
+               tmp = 2;
+               break;
+       case 25000000: /* 25.000 MHz */
+               tmp = 3;
+               break;
+       default:
+               err("invalid clock");
+               return -EINVAL;
+       }
+
+       adc_cw = af913_div(state->config.clock, 1000000ul, 19);
+       buf[0] = (adc_cw >>  0) & 0xff;
+       buf[1] = (adc_cw >>  8) & 0xff;
+       buf[2] = (adc_cw >> 16) & 0xff;
+
+       ret = af9013_wr_regs(state, 0xd180, buf, 3);
+       if (ret)
+               goto err;
+
+       ret = af9013_wr_reg_bits(state, 0x9bd2, 0, 4, tmp);
        if (ret)
-               goto error;
+               goto err;
 
        /* set I2C master clock */
-       ret = af9013_write_reg(state, 0xd416, 0x14);
+       ret = af9013_wr_reg(state, 0xd416, 0x14);
        if (ret)
-               goto error;
+               goto err;
 
        /* set 16 embx */
-       ret = af9013_write_reg_bits(state, 0xd700, 1, 1, 1);
+       ret = af9013_wr_reg_bits(state, 0xd700, 1, 1, 1);
        if (ret)
-               goto error;
+               goto err;
 
        /* set no trigger */
-       ret = af9013_write_reg_bits(state, 0xd700, 2, 1, 0);
+       ret = af9013_wr_reg_bits(state, 0xd700, 2, 1, 0);
        if (ret)
-               goto error;
+               goto err;
 
        /* set read-update bit for constellation */
-       ret = af9013_write_reg_bits(state, 0xd371, 1, 1, 1);
+       ret = af9013_wr_reg_bits(state, 0xd371, 1, 1, 1);
        if (ret)
-               goto error;
+               goto err;
 
-       /* enable FEC monitor */
-       ret = af9013_write_reg_bits(state, 0xd392, 1, 1, 1);
+       /* settings for mp2if */
+       if (state->config.ts_mode == AF9013_TS_USB) {
+               /* AF9015 split PSB to 1.5k + 0.5k */
+               ret = af9013_wr_reg_bits(state, 0xd50b, 2, 1, 1);
+               if (ret)
+                       goto err;
+       } else {
+               /* AF9013 change the output bit to data7 */
+               ret = af9013_wr_reg_bits(state, 0xd500, 3, 1, 1);
+               if (ret)
+                       goto err;
+
+               /* AF9013 set mpeg to full speed */
+               ret = af9013_wr_reg_bits(state, 0xd502, 4, 1, 1);
+               if (ret)
+                       goto err;
+       }
+
+       ret = af9013_wr_reg_bits(state, 0xd520, 4, 1, 1);
        if (ret)
-               goto error;
+               goto err;
 
        /* load OFSM settings */
-       deb_info("%s: load ofsm settings\n", __func__);
+       dbg("%s: load ofsm settings", __func__);
        len = ARRAY_SIZE(ofsm_init);
        init = ofsm_init;
        for (i = 0; i < len; i++) {
-               ret = af9013_write_reg_bits(state, init[i].addr, init[i].pos,
+               ret = af9013_wr_reg_bits(state, init[i].addr, init[i].pos,
                        init[i].len, init[i].val);
                if (ret)
-                       goto error;
+                       goto err;
        }
 
        /* load tuner specific settings */
-       deb_info("%s: load tuner specific settings\n", __func__);
+       dbg("%s: load tuner specific settings", __func__);
        switch (state->config.tuner) {
        case AF9013_TUNER_MXL5003D:
                len = ARRAY_SIZE(tuner_init_mxl5003d);
@@ -1237,65 +1199,133 @@ static int af9013_init(struct dvb_frontend *fe)
        }
 
        for (i = 0; i < len; i++) {
-               ret = af9013_write_reg_bits(state, init[i].addr, init[i].pos,
+               ret = af9013_wr_reg_bits(state, init[i].addr, init[i].pos,
                        init[i].len, init[i].val);
                if (ret)
-                       goto error;
+                       goto err;
        }
 
-       /* set TS mode */
-       deb_info("%s: setting ts mode\n", __func__);
-       tmp0 = 0; /* parallel mode */
-       tmp1 = 0; /* serial mode */
-       switch (state->config.output_mode) {
-       case AF9013_OUTPUT_MODE_PARALLEL:
-               tmp0 = 1;
-               break;
-       case AF9013_OUTPUT_MODE_SERIAL:
-               tmp1 = 1;
-               break;
-       case AF9013_OUTPUT_MODE_USB:
-               /* usb mode for AF9015 */
-       default:
-               break;
-       }
-       ret = af9013_write_reg_bits(state, 0xd500, 1, 1, tmp0); /* parallel */
+       /* TS mode */
+       ret = af9013_wr_reg_bits(state, 0xd500, 1, 2, state->config.ts_mode);
        if (ret)
-               goto error;
-       ret = af9013_write_reg_bits(state, 0xd500, 2, 1, tmp1); /* serial */
-       if (ret)
-               goto error;
+               goto err;
 
        /* enable lock led */
-       ret = af9013_lock_led(state, 1);
+       ret = af9013_wr_reg_bits(state, 0xd730, 0, 1, 1);
        if (ret)
-               goto error;
+               goto err;
 
-       /* read values needed for signal strength calculation */
-       ret = af9013_read_reg_bits(state, 0x9bee, 0, 1,
-               &state->signal_strength_en);
-       if (ret)
-               goto error;
+       /* check if we support signal strength */
+       if (!state->signal_strength_en) {
+               ret = af9013_rd_reg_bits(state, 0x9bee, 0, 1,
+                       &state->signal_strength_en);
+               if (ret)
+                       goto err;
+       }
 
-       if (state->signal_strength_en) {
-               ret = af9013_read_reg(state, 0x9bbd, &state->rf_50);
+       /* read values needed for signal strength calculation */
+       if (state->signal_strength_en && !state->rf_50) {
+               ret = af9013_rd_reg(state, 0x9bbd, &state->rf_50);
                if (ret)
-                       goto error;
-               ret = af9013_read_reg(state, 0x9bd0, &state->rf_80);
+                       goto err;
+
+               ret = af9013_rd_reg(state, 0x9bd0, &state->rf_80);
                if (ret)
-                       goto error;
-               ret = af9013_read_reg(state, 0x9be2, &state->if_50);
+                       goto err;
+
+               ret = af9013_rd_reg(state, 0x9be2, &state->if_50);
                if (ret)
-                       goto error;
-               ret = af9013_read_reg(state, 0x9be4, &state->if_80);
+                       goto err;
+
+               ret = af9013_rd_reg(state, 0x9be4, &state->if_80);
                if (ret)
-                       goto error;
+                       goto err;
        }
 
-error:
+       /* SNR */
+       ret = af9013_wr_reg(state, 0xd2e2, 1);
+       if (ret)
+               goto err;
+
+       /* BER / UCB */
+       buf[0] = (10000 >> 0) & 0xff;
+       buf[1] = (10000 >> 8) & 0xff;
+       ret = af9013_wr_regs(state, 0xd385, buf, 2);
+       if (ret)
+               goto err;
+
+       /* enable FEC monitor */
+       ret = af9013_wr_reg_bits(state, 0xd392, 1, 1, 1);
+       if (ret)
+               goto err;
+
+       state->first_tune = true;
+       schedule_delayed_work(&state->statistics_work, msecs_to_jiffies(400));
+
+       return ret;
+err:
+       dbg("%s: failed=%d", __func__, ret);
+       return ret;
+}
+
+static int af9013_sleep(struct dvb_frontend *fe)
+{
+       struct af9013_state *state = fe->demodulator_priv;
+       int ret;
+
+       dbg("%s", __func__);
+
+       /* stop statistics polling */
+       cancel_delayed_work_sync(&state->statistics_work);
+
+       /* disable lock led */
+       ret = af9013_wr_reg_bits(state, 0xd730, 0, 1, 0);
+       if (ret)
+               goto err;
+
+       /* power off */
+       ret = af9013_power_ctrl(state, 0);
+       if (ret)
+               goto err;
+
+       return ret;
+err:
+       dbg("%s: failed=%d", __func__, ret);
+       return ret;
+}
+
+static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+       int ret;
+       struct af9013_state *state = fe->demodulator_priv;
+
+       dbg("%s: enable=%d", __func__, enable);
+
+       /* gate already open or close */
+       if (state->i2c_gate_state == enable)
+               return 0;
+
+       if (state->config.ts_mode == AF9013_TS_USB)
+               ret = af9013_wr_reg_bits(state, 0xd417, 3, 1, enable);
+       else
+               ret = af9013_wr_reg_bits(state, 0xd607, 2, 1, enable);
+       if (ret)
+               goto err;
+
+       state->i2c_gate_state = enable;
+
+       return ret;
+err:
+       dbg("%s: failed=%d", __func__, ret);
        return ret;
 }
 
+static void af9013_release(struct dvb_frontend *fe)
+{
+       struct af9013_state *state = fe->demodulator_priv;
+       kfree(state);
+}
+
 static struct dvb_frontend_ops af9013_ops;
 
 static int af9013_download_firmware(struct af9013_state *state)
@@ -1309,11 +1339,11 @@ static int af9013_download_firmware(struct af9013_state *state)
 
        msleep(100);
        /* check whether firmware is already running */
-       ret = af9013_read_reg(state, 0x98be, &val);
+       ret = af9013_rd_reg(state, 0x98be, &val);
        if (ret)
-               goto error;
+               goto err;
        else
-               deb_info("%s: firmware status:%02x\n", __func__, val);
+               dbg("%s: firmware status=%02x", __func__, val);
 
        if (val == 0x0c) /* fw is running, no need for download */
                goto exit;
@@ -1328,7 +1358,7 @@ static int af9013_download_firmware(struct af9013_state *state)
                        "Please see linux/Documentation/dvb/ for more details" \
                        " on firmware-problems. (%d)",
                        fw_file, ret);
-               goto error;
+               goto err;
        }
 
        info("downloading firmware from file '%s'", fw_file);
@@ -1346,7 +1376,7 @@ static int af9013_download_firmware(struct af9013_state *state)
        ret = af9013_write_ofsm_regs(state, 0x50fc,
                fw_params, sizeof(fw_params));
        if (ret)
-               goto error_release;
+               goto err_release;
 
        #define FW_ADDR 0x5100 /* firmware start address */
        #define LEN_MAX 16 /* max packet size */
@@ -1360,24 +1390,24 @@ static int af9013_download_firmware(struct af9013_state *state)
                        (u8 *) &fw->data[fw->size - remaining], len);
                if (ret) {
                        err("firmware download failed:%d", ret);
-                       goto error_release;
+                       goto err_release;
                }
        }
 
        /* request boot firmware */
-       ret = af9013_write_reg(state, 0xe205, 1);
+       ret = af9013_wr_reg(state, 0xe205, 1);
        if (ret)
-               goto error_release;
+               goto err_release;
 
        for (i = 0; i < 15; i++) {
                msleep(100);
 
                /* check firmware status */
-               ret = af9013_read_reg(state, 0x98be, &val);
+               ret = af9013_rd_reg(state, 0x98be, &val);
                if (ret)
-                       goto error_release;
+                       goto err_release;
 
-               deb_info("%s: firmware status:%02x\n", __func__, val);
+               dbg("%s: firmware status=%02x", __func__, val);
 
                if (val == 0x0c || val == 0x04) /* success or fail */
                        break;
@@ -1385,43 +1415,21 @@ static int af9013_download_firmware(struct af9013_state *state)
 
        if (val == 0x04) {
                err("firmware did not run");
-               ret = -1;
+               ret = -ENODEV;
        } else if (val != 0x0c) {
                err("firmware boot timeout");
-               ret = -1;
+               ret = -ENODEV;
        }
 
-error_release:
+err_release:
        release_firmware(fw);
-error:
+err:
 exit:
        if (!ret)
                info("found a '%s' in warm state.", af9013_ops.info.name);
        return ret;
 }
 
-static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
-{
-       int ret;
-       struct af9013_state *state = fe->demodulator_priv;
-       deb_info("%s: enable:%d\n", __func__, enable);
-
-       if (state->config.output_mode == AF9013_OUTPUT_MODE_USB)
-               ret = af9013_write_reg_bits(state, 0xd417, 3, 1, enable);
-       else
-               ret = af9013_write_reg_bits(state, 0xd607, 2, 1, enable);
-
-       return ret;
-}
-
-static void af9013_release(struct dvb_frontend *fe)
-{
-       struct af9013_state *state = fe->demodulator_priv;
-       kfree(state);
-}
-
-static struct dvb_frontend_ops af9013_ops;
-
 struct dvb_frontend *af9013_attach(const struct af9013_config *config,
        struct i2c_adapter *i2c)
 {
@@ -1432,73 +1440,42 @@ struct dvb_frontend *af9013_attach(const struct af9013_config *config,
        /* allocate memory for the internal state */
        state = kzalloc(sizeof(struct af9013_state), GFP_KERNEL);
        if (state == NULL)
-               goto error;
+               goto err;
 
        /* setup the state */
        state->i2c = i2c;
        memcpy(&state->config, config, sizeof(struct af9013_config));
 
        /* download firmware */
-       if (state->config.output_mode != AF9013_OUTPUT_MODE_USB) {
+       if (state->config.ts_mode != AF9013_TS_USB) {
                ret = af9013_download_firmware(state);
                if (ret)
-                       goto error;
+                       goto err;
        }
 
        /* firmware version */
-       for (i = 0; i < 4; i++) {
-               ret = af9013_read_reg(state, 0x5103 + i, &buf[i]);
-               if (ret)
-                       goto error;
-       }
-       info("firmware version:%d.%d.%d.%d", buf[0], buf[1], buf[2], buf[3]);
-
-       /* chip version */
-       ret = af9013_read_reg_bits(state, 0xd733, 4, 4, &buf[2]);
+       ret = af9013_rd_regs(state, 0x5103, buf, 4);
        if (ret)
-               goto error;
-
-       /* ROM version */
-       for (i = 0; i < 2; i++) {
-               ret = af9013_read_reg(state, 0x116b + i, &buf[i]);
-               if (ret)
-                       goto error;
-       }
-       deb_info("%s: chip version:%d ROM version:%d.%d\n", __func__,
-               buf[2], buf[0], buf[1]);
+               goto err;
 
-       /* settings for mp2if */
-       if (state->config.output_mode == AF9013_OUTPUT_MODE_USB) {
-               /* AF9015 split PSB to 1.5k + 0.5k */
-               ret = af9013_write_reg_bits(state, 0xd50b, 2, 1, 1);
-       } else {
-               /* AF9013 change the output bit to data7 */
-               ret = af9013_write_reg_bits(state, 0xd500, 3, 1, 1);
-               if (ret)
-                       goto error;
-               /* AF9013 set mpeg to full speed */
-               ret = af9013_write_reg_bits(state, 0xd502, 4, 1, 1);
-       }
-       if (ret)
-               goto error;
-       ret = af9013_write_reg_bits(state, 0xd520, 4, 1, 1);
-       if (ret)
-               goto error;
+       info("firmware version %d.%d.%d.%d", buf[0], buf[1], buf[2], buf[3]);
 
        /* set GPIOs */
        for (i = 0; i < sizeof(state->config.gpio); i++) {
                ret = af9013_set_gpio(state, i, state->config.gpio[i]);
                if (ret)
-                       goto error;
+                       goto err;
        }
 
        /* create dvb_frontend */
-       memcpy(&state->frontend.ops, &af9013_ops,
+       memcpy(&state->fe.ops, &af9013_ops,
                sizeof(struct dvb_frontend_ops));
-       state->frontend.demodulator_priv = state;
+       state->fe.demodulator_priv = state;
+
+       INIT_DELAYED_WORK(&state->statistics_work, af9013_statistics_work);
 
-       return &state->frontend;
-error:
+       return &state->fe;
+err:
        kfree(state);
        return NULL;
 }
@@ -1506,17 +1483,22 @@ EXPORT_SYMBOL(af9013_attach);
 
 static struct dvb_frontend_ops af9013_ops = {
        .info = {
-               .name = "Afatech AF9013 DVB-T",
+               .name = "Afatech AF9013",
                .type = FE_OFDM,
                .frequency_min = 174000000,
                .frequency_max = 862000000,
                .frequency_stepsize = 250000,
                .frequency_tolerance = 0,
-               .caps =
-                       FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-                       FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-                       FE_CAN_QPSK | FE_CAN_QAM_16 |
-                       FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+               .caps = FE_CAN_FEC_1_2 |
+                       FE_CAN_FEC_2_3 |
+                       FE_CAN_FEC_3_4 |
+                       FE_CAN_FEC_5_6 |
+                       FE_CAN_FEC_7_8 |
+                       FE_CAN_FEC_AUTO |
+                       FE_CAN_QPSK |
+                       FE_CAN_QAM_16 |
+                       FE_CAN_QAM_64 |
+                       FE_CAN_QAM_AUTO |
                        FE_CAN_TRANSMISSION_MODE_AUTO |
                        FE_CAN_GUARD_INTERVAL_AUTO |
                        FE_CAN_HIERARCHY_AUTO |
@@ -1525,24 +1507,22 @@ static struct dvb_frontend_ops af9013_ops = {
        },
 
        .release = af9013_release,
+
        .init = af9013_init,
        .sleep = af9013_sleep,
-       .i2c_gate_ctrl = af9013_i2c_gate_ctrl,
 
+       .get_tune_settings = af9013_get_tune_settings,
        .set_frontend = af9013_set_frontend,
        .get_frontend = af9013_get_frontend,
 
-       .get_tune_settings = af9013_get_tune_settings,
-
        .read_status = af9013_read_status,
-       .read_ber = af9013_read_ber,
-       .read_signal_strength = af9013_read_signal_strength,
        .read_snr = af9013_read_snr,
+       .read_signal_strength = af9013_read_signal_strength,
+       .read_ber = af9013_read_ber,
        .read_ucblocks = af9013_read_ucblocks,
-};
 
-module_param_named(debug, af9013_debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+       .i2c_gate_ctrl = af9013_i2c_gate_ctrl,
+};
 
 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
 MODULE_DESCRIPTION("Afatech AF9013 DVB-T demodulator driver");
index e53d873f75557e273735179be49e968ad2fc44c9..b973fc5a03844d68db01ee8ed2743192688b9263 100644 (file)
@@ -2,6 +2,7 @@
  * Afatech AF9013 demodulator driver
  *
  * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
  *
  * Thanks to Afatech who kindly provided information.
  *
  *
  */
 
-#ifndef _AF9013_H_
-#define _AF9013_H_
+#ifndef AF9013_H
+#define AF9013_H
 
 #include <linux/dvb/frontend.h>
 
-enum af9013_ts_mode {
-       AF9013_OUTPUT_MODE_PARALLEL,
-       AF9013_OUTPUT_MODE_SERIAL,
-       AF9013_OUTPUT_MODE_USB, /* only for AF9015 */
-};
-
-enum af9013_tuner {
-       AF9013_TUNER_MXL5003D   =   3, /* MaxLinear */
-       AF9013_TUNER_MXL5005D   =  13, /* MaxLinear */
-       AF9013_TUNER_MXL5005R   =  30, /* MaxLinear */
-       AF9013_TUNER_ENV77H11D5 = 129, /* Panasonic */
-       AF9013_TUNER_MT2060     = 130, /* Microtune */
-       AF9013_TUNER_MC44S803   = 133, /* Freescale */
-       AF9013_TUNER_QT1010     = 134, /* Quantek */
-       AF9013_TUNER_UNKNOWN    = 140, /* for can tuners ? */
-       AF9013_TUNER_MT2060_2   = 147, /* Microtune */
-       AF9013_TUNER_TDA18271   = 156, /* NXP */
-       AF9013_TUNER_QT1010A    = 162, /* Quantek */
-       AF9013_TUNER_MXL5007T   = 177, /* MaxLinear */
-       AF9013_TUNER_TDA18218   = 179, /* NXP */
-};
-
 /* AF9013/5 GPIOs (mostly guessed)
    demod#1-gpio#0 - set demod#2 i2c-addr for dual devices
    demod#1-gpio#1 - xtal setting (?)
@@ -55,44 +34,74 @@ enum af9013_tuner {
    demod#2-gpio#0 - tuner#2
    demod#2-gpio#1 - xtal setting (?)
 */
+
+struct af9013_config {
+       /*
+        * I2C address
+        */
+       u8 i2c_addr;
+
+       /*
+        * clock
+        * 20480000, 25000000, 28000000, 28800000
+        */
+       u32 clock;
+
+       /*
+        * tuner
+        */
+#define AF9013_TUNER_MXL5003D      3 /* MaxLinear */
+#define AF9013_TUNER_MXL5005D     13 /* MaxLinear */
+#define AF9013_TUNER_MXL5005R     30 /* MaxLinear */
+#define AF9013_TUNER_ENV77H11D5  129 /* Panasonic */
+#define AF9013_TUNER_MT2060      130 /* Microtune */
+#define AF9013_TUNER_MC44S803    133 /* Freescale */
+#define AF9013_TUNER_QT1010      134 /* Quantek */
+#define AF9013_TUNER_UNKNOWN     140 /* for can tuners ? */
+#define AF9013_TUNER_MT2060_2    147 /* Microtune */
+#define AF9013_TUNER_TDA18271    156 /* NXP */
+#define AF9013_TUNER_QT1010A     162 /* Quantek */
+#define AF9013_TUNER_MXL5007T    177 /* MaxLinear */
+#define AF9013_TUNER_TDA18218    179 /* NXP */
+       u8 tuner;
+
+       /*
+        * IF frequency
+        */
+       u32 if_frequency;
+
+       /*
+        * TS settings
+        */
+#define AF9013_TS_USB       0
+#define AF9013_TS_PARALLEL  1
+#define AF9013_TS_SERIAL    2
+       u8 ts_mode:2;
+
+       /*
+        * input spectrum inversion
+        */
+       bool spec_inv;
+
+       /*
+        * firmware API version
+        */
+       u8 api_version[4];
+
+       /*
+        * GPIOs
+        */
 #define AF9013_GPIO_ON (1 << 0)
 #define AF9013_GPIO_EN (1 << 1)
 #define AF9013_GPIO_O  (1 << 2)
 #define AF9013_GPIO_I  (1 << 3)
-
 #define AF9013_GPIO_LO (AF9013_GPIO_ON|AF9013_GPIO_EN)
 #define AF9013_GPIO_HI (AF9013_GPIO_ON|AF9013_GPIO_EN|AF9013_GPIO_O)
-
 #define AF9013_GPIO_TUNER_ON  (AF9013_GPIO_ON|AF9013_GPIO_EN)
 #define AF9013_GPIO_TUNER_OFF (AF9013_GPIO_ON|AF9013_GPIO_EN|AF9013_GPIO_O)
-
-struct af9013_config {
-       /* demodulator's I2C address */
-       u8 demod_address;
-
-       /* frequencies in kHz */
-       u32 adc_clock;
-
-       /* tuner ID */
-       u8 tuner;
-
-       /* tuner IF */
-       u16 tuner_if;
-
-       /* TS data output mode */
-       u8 output_mode:2;
-
-       /* RF spectrum inversion */
-       u8 rf_spec_inv:1;
-
-       /* API version */
-       u8 api_version[4];
-
-       /* GPIOs */
        u8 gpio[4];
 };
 
-
 #if defined(CONFIG_DVB_AF9013) || \
        (defined(CONFIG_DVB_AF9013_MODULE) && defined(MODULE))
 extern struct dvb_frontend *af9013_attach(const struct af9013_config *config,
@@ -106,4 +115,4 @@ const struct af9013_config *config, struct i2c_adapter *i2c)
 }
 #endif /* CONFIG_DVB_AF9013 */
 
-#endif /* _AF9013_H_ */
+#endif /* AF9013_H */
index e00b2a4a2db6503a190a430066c7156c71fe3959..fa848af6e9b403fe6b8c7d9eec07d9b06647776b 100644 (file)
@@ -2,6 +2,7 @@
  * Afatech AF9013 demodulator driver
  *
  * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
  *
  * Thanks to Afatech who kindly provided information.
  *
  *
  */
 
-#ifndef _AF9013_PRIV_
-#define _AF9013_PRIV_
+#ifndef AF9013_PRIV_H
+#define AF9013_PRIV_H
 
-#define LOG_PREFIX "af9013"
-extern int af9013_debug;
-
-#define dprintk(var, level, args...) \
-           do { if ((var & level)) printk(args); } while (0)
+#include "dvb_frontend.h"
+#include "af9013.h"
+#include <linux/firmware.h>
 
-#define debug_dump(b, l, func) {\
-       int loop_; \
-       for (loop_ = 0; loop_ < l; loop_++) \
-               func("%02x ", b[loop_]); \
-       func("\n");\
-}
-
-#define deb_info(args...) dprintk(af9013_debug, 0x01, args)
+#define LOG_PREFIX "af9013"
 
+#undef dbg
+#define dbg(f, arg...) \
+       if (af9013_debug) \
+               printk(KERN_INFO   LOG_PREFIX": " f "\n" , ## arg)
 #undef err
 #define err(f, arg...)  printk(KERN_ERR     LOG_PREFIX": " f "\n" , ## arg)
 #undef info
@@ -48,70 +44,71 @@ extern int af9013_debug;
 
 #define AF9013_DEFAULT_FIRMWARE     "dvb-fe-af9013.fw"
 
-struct regdesc {
+struct af9013_reg_bit {
        u16 addr;
        u8  pos:4;
        u8  len:4;
        u8  val;
 };
 
-struct snr_table {
+struct af9013_snr {
        u32 val;
        u8 snr;
 };
 
-struct coeff {
-       u32 adc_clock;
-       fe_bandwidth_t bw;
+struct af9013_coeff {
+       u32 clock;
+       u32 bandwidth_hz;
        u8 val[24];
 };
 
 /* pre-calculated coeff lookup table */
-static struct coeff coeff_table[] = {
+static const struct af9013_coeff coeff_lut[] = {
        /* 28.800 MHz */
-       { 28800, BANDWIDTH_8_MHZ, { 0x02, 0x8a, 0x28, 0xa3, 0x05, 0x14,
+       { 28800000, 8000000, { 0x02, 0x8a, 0x28, 0xa3, 0x05, 0x14,
                0x51, 0x11, 0x00, 0xa2, 0x8f, 0x3d, 0x00, 0xa2, 0x8a,
                0x29, 0x00, 0xa2, 0x85, 0x14, 0x01, 0x45, 0x14, 0x14 } },
-       { 28800, BANDWIDTH_7_MHZ, { 0x02, 0x38, 0xe3, 0x8e, 0x04, 0x71,
+       { 28800000, 7000000, { 0x02, 0x38, 0xe3, 0x8e, 0x04, 0x71,
                0xc7, 0x07, 0x00, 0x8e, 0x3d, 0x55, 0x00, 0x8e, 0x38,
                0xe4, 0x00, 0x8e, 0x34, 0x72, 0x01, 0x1c, 0x71, 0x32 } },
-       { 28800, BANDWIDTH_6_MHZ, { 0x01, 0xe7, 0x9e, 0x7a, 0x03, 0xcf,
+       { 28800000, 6000000, { 0x01, 0xe7, 0x9e, 0x7a, 0x03, 0xcf,
                0x3c, 0x3d, 0x00, 0x79, 0xeb, 0x6e, 0x00, 0x79, 0xe7,
                0x9e, 0x00, 0x79, 0xe3, 0xcf, 0x00, 0xf3, 0xcf, 0x0f } },
        /* 20.480 MHz */
-       { 20480, BANDWIDTH_8_MHZ, { 0x03, 0x92, 0x49, 0x26, 0x07, 0x24,
+       { 20480000, 8000000, { 0x03, 0x92, 0x49, 0x26, 0x07, 0x24,
                0x92, 0x13, 0x00, 0xe4, 0x99, 0x6e, 0x00, 0xe4, 0x92,
                0x49, 0x00, 0xe4, 0x8b, 0x25, 0x01, 0xc9, 0x24, 0x25 } },
-       { 20480, BANDWIDTH_7_MHZ, { 0x03, 0x20, 0x00, 0x01, 0x06, 0x40,
+       { 20480000, 7000000, { 0x03, 0x20, 0x00, 0x01, 0x06, 0x40,
                0x00, 0x00, 0x00, 0xc8, 0x06, 0x40, 0x00, 0xc8, 0x00,
                0x00, 0x00, 0xc7, 0xf9, 0xc0, 0x01, 0x90, 0x00, 0x00 } },
-       { 20480, BANDWIDTH_6_MHZ, { 0x02, 0xad, 0xb6, 0xdc, 0x05, 0x5b,
+       { 20480000, 6000000, { 0x02, 0xad, 0xb6, 0xdc, 0x05, 0x5b,
                0x6d, 0x2e, 0x00, 0xab, 0x73, 0x13, 0x00, 0xab, 0x6d,
                0xb7, 0x00, 0xab, 0x68, 0x5c, 0x01, 0x56, 0xdb, 0x1c } },
        /* 28.000 MHz */
-       { 28000, BANDWIDTH_8_MHZ, { 0x02, 0x9c, 0xbc, 0x15, 0x05, 0x39,
+       { 28000000, 8000000, { 0x02, 0x9c, 0xbc, 0x15, 0x05, 0x39,
                0x78, 0x0a, 0x00, 0xa7, 0x34, 0x3f, 0x00, 0xa7, 0x2f,
                0x05, 0x00, 0xa7, 0x29, 0xcc, 0x01, 0x4e, 0x5e, 0x03 } },
-       { 28000, BANDWIDTH_7_MHZ, { 0x02, 0x49, 0x24, 0x92, 0x04, 0x92,
+       { 28000000, 7000000, { 0x02, 0x49, 0x24, 0x92, 0x04, 0x92,
                0x49, 0x09, 0x00, 0x92, 0x4d, 0xb7, 0x00, 0x92, 0x49,
                0x25, 0x00, 0x92, 0x44, 0x92, 0x01, 0x24, 0x92, 0x12 } },
-       { 28000, BANDWIDTH_6_MHZ, { 0x01, 0xf5, 0x8d, 0x10, 0x03, 0xeb,
+       { 28000000, 6000000, { 0x01, 0xf5, 0x8d, 0x10, 0x03, 0xeb,
                0x1a, 0x08, 0x00, 0x7d, 0x67, 0x2f, 0x00, 0x7d, 0x63,
                0x44, 0x00, 0x7d, 0x5f, 0x59, 0x00, 0xfa, 0xc6, 0x22 } },
        /* 25.000 MHz */
-       { 25000, BANDWIDTH_8_MHZ, { 0x02, 0xec, 0xfb, 0x9d, 0x05, 0xd9,
+       { 25000000, 8000000, { 0x02, 0xec, 0xfb, 0x9d, 0x05, 0xd9,
                0xf7, 0x0e, 0x00, 0xbb, 0x44, 0xc1, 0x00, 0xbb, 0x3e,
                0xe7, 0x00, 0xbb, 0x39, 0x0d, 0x01, 0x76, 0x7d, 0x34 } },
-       { 25000, BANDWIDTH_7_MHZ, { 0x02, 0x8f, 0x5c, 0x29, 0x05, 0x1e,
+       { 25000000, 7000000, { 0x02, 0x8f, 0x5c, 0x29, 0x05, 0x1e,
                0xb8, 0x14, 0x00, 0xa3, 0xdc, 0x29, 0x00, 0xa3, 0xd7,
                0x0a, 0x00, 0xa3, 0xd1, 0xec, 0x01, 0x47, 0xae, 0x05 } },
-       { 25000, BANDWIDTH_6_MHZ, { 0x02, 0x31, 0xbc, 0xb5, 0x04, 0x63,
+       { 25000000, 6000000, { 0x02, 0x31, 0xbc, 0xb5, 0x04, 0x63,
                0x79, 0x1b, 0x00, 0x8c, 0x73, 0x91, 0x00, 0x8c, 0x6f,
                0x2d, 0x00, 0x8c, 0x6a, 0xca, 0x01, 0x18, 0xde, 0x17 } },
 };
 
 /* QPSK SNR lookup table */
-static struct snr_table qpsk_snr_table[] = {
+static const struct af9013_snr qpsk_snr_lut[] = {
+       { 0x000000,  0 },
        { 0x0b4771,  0 },
        { 0x0c1aed,  1 },
        { 0x0d0d27,  2 },
@@ -131,7 +128,8 @@ static struct snr_table qpsk_snr_table[] = {
 };
 
 /* QAM16 SNR lookup table */
-static struct snr_table qam16_snr_table[] = {
+static const struct af9013_snr qam16_snr_lut[] = {
+       { 0x000000,  0 },
        { 0x05eb62,  5 },
        { 0x05fecf,  6 },
        { 0x060b80,  7 },
@@ -151,7 +149,8 @@ static struct snr_table qam16_snr_table[] = {
 };
 
 /* QAM64 SNR lookup table */
-static struct snr_table qam64_snr_table[] = {
+static const struct af9013_snr qam64_snr_lut[] = {
+       { 0x000000,  0 },
        { 0x03109b, 12 },
        { 0x0310d4, 13 },
        { 0x031920, 14 },
@@ -170,7 +169,7 @@ static struct snr_table qam64_snr_table[] = {
        { 0xffffff, 27 },
 };
 
-static struct regdesc ofsm_init[] = {
+static const struct af9013_reg_bit ofsm_init[] = {
        { 0xd73a, 0, 8, 0xa1 },
        { 0xd73b, 0, 8, 0x1f },
        { 0xd73c, 4, 4, 0x0a },
@@ -252,7 +251,7 @@ static struct regdesc ofsm_init[] = {
 
 /* Panasonic ENV77H11D5 tuner init
    AF9013_TUNER_ENV77H11D5 = 129 */
-static struct regdesc tuner_init_env77h11d5[] = {
+static const struct af9013_reg_bit tuner_init_env77h11d5[] = {
        { 0x9bd5, 0, 8, 0x01 },
        { 0x9bd6, 0, 8, 0x03 },
        { 0x9bbe, 0, 8, 0x01 },
@@ -318,7 +317,7 @@ static struct regdesc tuner_init_env77h11d5[] = {
 
 /* Microtune MT2060 tuner init
    AF9013_TUNER_MT2060     = 130 */
-static struct regdesc tuner_init_mt2060[] = {
+static const struct af9013_reg_bit tuner_init_mt2060[] = {
        { 0x9bd5, 0, 8, 0x01 },
        { 0x9bd6, 0, 8, 0x07 },
        { 0xd1a0, 1, 1, 0x01 },
@@ -395,7 +394,7 @@ static struct regdesc tuner_init_mt2060[] = {
 
 /* Microtune MT2060 tuner init
    AF9013_TUNER_MT2060_2   = 147 */
-static struct regdesc tuner_init_mt2060_2[] = {
+static const struct af9013_reg_bit tuner_init_mt2060_2[] = {
        { 0x9bd5, 0, 8, 0x01 },
        { 0x9bd6, 0, 8, 0x06 },
        { 0x9bbe, 0, 8, 0x01 },
@@ -462,7 +461,7 @@ static struct regdesc tuner_init_mt2060_2[] = {
 
 /* MaxLinear MXL5003 tuner init
    AF9013_TUNER_MXL5003D   =   3 */
-static struct regdesc tuner_init_mxl5003d[] = {
+static const struct af9013_reg_bit tuner_init_mxl5003d[] = {
        { 0x9bd5, 0, 8, 0x01 },
        { 0x9bd6, 0, 8, 0x09 },
        { 0xd1a0, 1, 1, 0x01 },
@@ -534,7 +533,7 @@ static struct regdesc tuner_init_mxl5003d[] = {
    AF9013_TUNER_MXL5005D   =  13
    AF9013_TUNER_MXL5005R   =  30
    AF9013_TUNER_MXL5007T   = 177 */
-static struct regdesc tuner_init_mxl5005[] = {
+static const struct af9013_reg_bit tuner_init_mxl5005[] = {
        { 0x9bd5, 0, 8, 0x01 },
        { 0x9bd6, 0, 8, 0x07 },
        { 0xd1a0, 1, 1, 0x01 },
@@ -613,7 +612,7 @@ static struct regdesc tuner_init_mxl5005[] = {
 /* Quantek QT1010 tuner init
    AF9013_TUNER_QT1010     = 134
    AF9013_TUNER_QT1010A    = 162 */
-static struct regdesc tuner_init_qt1010[] = {
+static const struct af9013_reg_bit tuner_init_qt1010[] = {
        { 0x9bd5, 0, 8, 0x01 },
        { 0x9bd6, 0, 8, 0x09 },
        { 0xd1a0, 1, 1, 0x01 },
@@ -690,7 +689,7 @@ static struct regdesc tuner_init_qt1010[] = {
 
 /* Freescale MC44S803 tuner init
    AF9013_TUNER_MC44S803   = 133 */
-static struct regdesc tuner_init_mc44s803[] = {
+static const struct af9013_reg_bit tuner_init_mc44s803[] = {
        { 0x9bd5, 0, 8, 0x01 },
        { 0x9bd6, 0, 8, 0x06 },
        { 0xd1a0, 1, 1, 0x01 },
@@ -772,7 +771,7 @@ static struct regdesc tuner_init_mc44s803[] = {
 
 /* unknown, probably for tin can tuner, tuner init
    AF9013_TUNER_UNKNOWN   = 140 */
-static struct regdesc tuner_init_unknown[] = {
+static const struct af9013_reg_bit tuner_init_unknown[] = {
        { 0x9bd5, 0, 8, 0x01 },
        { 0x9bd6, 0, 8, 0x02 },
        { 0xd1a0, 1, 1, 0x01 },
@@ -845,7 +844,7 @@ static struct regdesc tuner_init_unknown[] = {
 /* NXP TDA18271 & TDA18218 tuner init
    AF9013_TUNER_TDA18271   = 156
    AF9013_TUNER_TDA18218   = 179 */
-static struct regdesc tuner_init_tda18271[] = {
+static const struct af9013_reg_bit tuner_init_tda18271[] = {
        { 0x9bd5, 0, 8, 0x01 },
        { 0x9bd6, 0, 8, 0x04 },
        { 0xd1a0, 1, 1, 0x01 },
@@ -920,4 +919,4 @@ static struct regdesc tuner_init_tda18271[] = {
        { 0x9bee, 0, 1, 0x01 },
 };
 
-#endif /* _AF9013_PRIV_ */
+#endif /* AF9013_PRIV_H */