#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
PORT_RC | PORT_PLC | PORT_PE)
-static void xhci_hub_descriptor(struct xhci_hcd *xhci,
+static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
struct usb_hub_descriptor *desc)
{
int ports;
u16 temp;
- ports = HCS_MAX_PORTS(xhci->hcs_params1);
+ if (hcd->speed == HCD_USB3)
+ ports = xhci->num_usb3_ports;
+ else
+ ports = xhci->num_usb2_ports;
+
+ /* FIXME: return a USB 3.0 hub descriptor if this request was for the
+ * USB3 roothub.
+ */
/* USB 3.0 hubs have a different descriptor, but we fake this for now */
desc->bDescriptorType = 0x29;
/*
* find slot id based on port number.
+ * @port: The one-based port number from one of the two split roothubs.
*/
int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
u16 port)
{
int slot_id;
int i;
+ enum usb_device_speed speed;
slot_id = 0;
for (i = 0; i < MAX_HC_SLOTS; i++) {
if (!xhci->devs[i])
continue;
- if (xhci->devs[i]->port == port) {
+ speed = xhci->devs[i]->udev->speed;
+ if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3))
+ && xhci->devs[i]->port == port) {
slot_id = i;
break;
}
return;
}
-static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex,
- u32 __iomem *addr, u32 port_status)
+static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
+ u16 wIndex, u32 __iomem *addr, u32 port_status)
{
/* Don't allow the USB core to disable SuperSpeed ports. */
- if (xhci->port_array[wIndex] == 0x03) {
+ if (hcd->speed == HCD_USB3) {
xhci_dbg(xhci, "Ignoring request to disable "
"SuperSpeed port.\n");
return;
unsigned long flags;
u32 temp, temp1, status;
int retval = 0;
- u32 __iomem *port_array[15 + USB_MAXCHILDREN];
- int i;
+ u32 __iomem **port_array;
int slot_id;
struct xhci_bus_state *bus_state;
- ports = HCS_MAX_PORTS(xhci->hcs_params1);
- for (i = 0; i < ports; i++) {
- if (i < xhci->num_usb3_ports)
- port_array[i] = xhci->usb3_ports[i];
- else
- port_array[i] =
- xhci->usb2_ports[i - xhci->num_usb3_ports];
+ if (hcd->speed == HCD_USB3) {
+ ports = xhci->num_usb3_ports;
+ port_array = xhci->usb3_ports;
+ } else {
+ ports = xhci->num_usb2_ports;
+ port_array = xhci->usb2_ports;
}
bus_state = &xhci->bus_state[hcd_index(hcd)];
memset(buf, 0, 4);
break;
case GetHubDescriptor:
- xhci_hub_descriptor(xhci, (struct usb_hub_descriptor *) buf);
+ xhci_hub_descriptor(hcd, xhci,
+ (struct usb_hub_descriptor *) buf);
break;
case GetPortStatus:
if (!wIndex || wIndex > ports)
port_array[wIndex], temp);
break;
case USB_PORT_FEAT_ENABLE:
- xhci_disable_port(xhci, wIndex,
+ xhci_disable_port(hcd, xhci, wIndex,
port_array[wIndex], temp);
break;
default:
int i, retval;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int ports;
- u32 __iomem *port_array[15 + USB_MAXCHILDREN];
+ u32 __iomem **port_array;
struct xhci_bus_state *bus_state;
- ports = HCS_MAX_PORTS(xhci->hcs_params1);
- for (i = 0; i < ports; i++) {
- if (i < xhci->num_usb3_ports)
- port_array[i] = xhci->usb3_ports[i];
- else
- port_array[i] =
- xhci->usb2_ports[i - xhci->num_usb3_ports];
+ if (hcd->speed == HCD_USB3) {
+ ports = xhci->num_usb3_ports;
+ port_array = xhci->usb3_ports;
+ } else {
+ ports = xhci->num_usb2_ports;
+ port_array = xhci->usb2_ports;
}
bus_state = &xhci->bus_state[hcd_index(hcd)];
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int max_ports, port_index;
- u32 __iomem *port_array[15 + USB_MAXCHILDREN];
- int i;
+ u32 __iomem **port_array;
struct xhci_bus_state *bus_state;
unsigned long flags;
- xhci_dbg(xhci, "suspend root hub\n");
- max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
- for (i = 0; i < max_ports; i++) {
- if (i < xhci->num_usb3_ports)
- port_array[i] = xhci->usb3_ports[i];
- else
- port_array[i] =
- xhci->usb2_ports[i - xhci->num_usb3_ports];
+ if (hcd->speed == HCD_USB3) {
+ max_ports = xhci->num_usb3_ports;
+ port_array = xhci->usb3_ports;
+ xhci_dbg(xhci, "suspend USB 3.0 root hub\n");
+ } else {
+ max_ports = xhci->num_usb2_ports;
+ port_array = xhci->usb2_ports;
+ xhci_dbg(xhci, "suspend USB 2.0 root hub\n");
}
bus_state = &xhci->bus_state[hcd_index(hcd)];
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int max_ports, port_index;
- u32 __iomem *port_array[15 + USB_MAXCHILDREN];
- int i;
+ u32 __iomem **port_array;
struct xhci_bus_state *bus_state;
u32 temp;
unsigned long flags;
- xhci_dbg(xhci, "resume root hub\n");
- max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
- for (i = 0; i < max_ports; i++) {
- if (i < xhci->num_usb3_ports)
- port_array[i] = xhci->usb3_ports[i];
- else
- port_array[i] =
- xhci->usb2_ports[i - xhci->num_usb3_ports];
+ if (hcd->speed == HCD_USB3) {
+ max_ports = xhci->num_usb3_ports;
+ port_array = xhci->usb3_ports;
+ xhci_dbg(xhci, "resume USB 3.0 root hub\n");
+ } else {
+ max_ports = xhci->num_usb2_ports;
+ port_array = xhci->usb2_ports;
+ xhci_dbg(xhci, "resume USB 2.0 root hub\n");
}
bus_state = &xhci->bus_state[hcd_index(hcd)];
ep0_ctx->deq |= ep_ring->cycle_state;
}
+/*
+ * The xHCI roothub may have ports of differing speeds in any order in the port
+ * status registers. xhci->port_array provides an array of the port speed for
+ * each offset into the port status registers.
+ *
+ * The xHCI hardware wants to know the roothub port number that the USB device
+ * is attached to (or the roothub port its ancestor hub is attached to). All we
+ * know is the index of that port under either the USB 2.0 or the USB 3.0
+ * roothub, but that doesn't give us the real index into the HW port status
+ * registers. Scan through the xHCI roothub port array, looking for the Nth
+ * entry of the correct port speed. Return the port number of that entry.
+ */
+static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
+ struct usb_device *udev)
+{
+ struct usb_device *top_dev;
+ unsigned int num_similar_speed_ports;
+ unsigned int faked_port_num;
+ int i;
+
+ for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
+ top_dev = top_dev->parent)
+ /* Found device below root hub */;
+ faked_port_num = top_dev->portnum;
+ for (i = 0, num_similar_speed_ports = 0;
+ i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
+ u8 port_speed = xhci->port_array[i];
+
+ /*
+ * Skip ports that don't have known speeds, or have duplicate
+ * Extended Capabilities port speed entries.
+ */
+ if (port_speed == 0 || port_speed == -1)
+ continue;
+
+ /*
+ * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and
+ * 1.1 ports are under the USB 2.0 hub. If the port speed
+ * matches the device speed, it's a similar speed port.
+ */
+ if ((port_speed == 0x03) == (udev->speed == USB_SPEED_SUPER))
+ num_similar_speed_ports++;
+ if (num_similar_speed_ports == faked_port_num)
+ /* Roothub ports are numbered from 1 to N */
+ return i+1;
+ }
+ return 0;
+}
+
/* Setup an xHCI virtual device for a Set Address command */
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
{
struct xhci_virt_device *dev;
struct xhci_ep_ctx *ep0_ctx;
- struct usb_device *top_dev;
struct xhci_slot_ctx *slot_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
+ u32 port_num;
+ struct usb_device *top_dev;
dev = xhci->devs[udev->slot_id];
/* Slot ID 0 is reserved */
BUG();
}
/* Find the root hub port this device is under */
+ port_num = xhci_find_real_port_number(xhci, udev);
+ if (!port_num)
+ return -EINVAL;
+ slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(port_num);
+ /* Set the port number in the virtual_device to the faked port number */
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
top_dev = top_dev->parent)
/* Found device below root hub */;
- slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
dev->port = top_dev->portnum;
- xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
+ xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num);
+ xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->port);
/* Is this a LS/FS device under an external HS hub? */
if (udev->tt && udev->tt->hub->parent) {
xhci->page_size = 0;
xhci->page_shift = 0;
xhci->bus_state[0].bus_suspended = 0;
+ xhci->bus_state[1].bus_suspended = 0;
}
static int xhci_test_trb_in_td(struct xhci_hcd *xhci,
init_completion(&xhci->addr_dev);
for (i = 0; i < MAX_HC_SLOTS; ++i)
xhci->devs[i] = NULL;
- for (i = 0; i < USB_MAXCHILDREN; ++i)
+ for (i = 0; i < USB_MAXCHILDREN; ++i) {
xhci->bus_state[0].resume_done[i] = 0;
+ xhci->bus_state[1].resume_done[i] = 0;
+ }
if (scratchpad_alloc(xhci, flags))
goto fail;
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
- struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct xhci_hcd *xhci;
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int retval;
u32 temp;
hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;
- xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
- if (!xhci)
- return -ENOMEM;
- *((struct xhci_hcd **) hcd->hcd_priv) = xhci;
- xhci->main_hcd = hcd;
+ if (usb_hcd_is_primary_hcd(hcd)) {
+ xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
+ if (!xhci)
+ return -ENOMEM;
+ *((struct xhci_hcd **) hcd->hcd_priv) = xhci;
+ xhci->main_hcd = hcd;
+ /* Mark the first roothub as being USB 2.0.
+ * The xHCI driver will register the USB 3.0 roothub.
+ */
+ hcd->speed = HCD_USB2;
+ hcd->self.root_hub->speed = USB_SPEED_HIGH;
+ /*
+ * USB 2.0 roothub under xHCI has an integrated TT,
+ * (rate matching hub) as opposed to having an OHCI/UHCI
+ * companion controller.
+ */
+ hcd->has_tt = 1;
+ } else {
+ /* xHCI private pointer was set in xhci_pci_probe for the second
+ * registered roothub.
+ */
+ xhci = hcd_to_xhci(hcd);
+ temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+ if (HCC_64BIT_ADDR(temp)) {
+ xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
+ dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
+ } else {
+ dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
+ }
+ return 0;
+ }
xhci->cap_regs = hcd->regs;
xhci->op_regs = hcd->regs +
return retval;
}
+/*
+ * We need to register our own PCI probe function (instead of the USB core's
+ * function) in order to create a second roothub under xHCI.
+ */
+static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ int retval;
+ struct xhci_hcd *xhci;
+ struct hc_driver *driver;
+ struct usb_hcd *hcd;
+
+ driver = (struct hc_driver *)id->driver_data;
+ /* Register the USB 2.0 roothub.
+ * FIXME: USB core must know to register the USB 2.0 roothub first.
+ * This is sort of silly, because we could just set the HCD driver flags
+ * to say USB 2.0, but I'm not sure what the implications would be in
+ * the other parts of the HCD code.
+ */
+ retval = usb_hcd_pci_probe(dev, id);
+
+ if (retval)
+ return retval;
+
+ /* USB 2.0 roothub is stored in the PCI device now. */
+ hcd = dev_get_drvdata(&dev->dev);
+ xhci = hcd_to_xhci(hcd);
+ xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev,
+ pci_name(dev), hcd);
+ if (!xhci->shared_hcd) {
+ retval = -ENOMEM;
+ goto dealloc_usb2_hcd;
+ }
+
+ /* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset)
+ * is called by usb_add_hcd().
+ */
+ *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;
+
+ retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
+ IRQF_DISABLED | IRQF_SHARED);
+ if (retval)
+ goto put_usb3_hcd;
+ /* Roothub already marked as USB 3.0 speed */
+ return 0;
+
+put_usb3_hcd:
+ usb_put_hcd(xhci->shared_hcd);
+dealloc_usb2_hcd:
+ usb_hcd_pci_remove(dev);
+ return retval;
+}
+
static void xhci_pci_remove(struct pci_dev *dev)
{
struct xhci_hcd *xhci;
xhci = hcd_to_xhci(pci_get_drvdata(dev));
+ if (xhci->shared_hcd) {
+ usb_remove_hcd(xhci->shared_hcd);
+ usb_put_hcd(xhci->shared_hcd);
+ }
usb_hcd_pci_remove(dev);
kfree(xhci);
}
* generic hardware linkage
*/
.irq = xhci_irq,
- .flags = HCD_MEMORY | HCD_USB3,
+ .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED,
/*
* basic lifecycle operations
.name = (char *) hcd_name,
.id_table = pci_ids,
- .probe = usb_hcd_pci_probe,
+ .probe = xhci_pci_probe,
.remove = xhci_pci_remove,
/* suspend and resume implemented later */
}
spin_unlock(&xhci->lock);
xhci_dbg(xhci, "Calling usb_hc_died()\n");
- usb_hc_died(xhci_to_hcd(xhci));
+ usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
xhci_dbg(xhci, "xHCI host controller is dead.\n");
}
handle_cmd_completion(xhci, &event->event_cmd);
}
+/* @port_id: the one-based port ID from the hardware (indexed from array of all
+ * port registers -- USB 3.0 and USB 2.0).
+ *
+ * Returns a zero-based port number, which is suitable for indexing into each of
+ * the split roothubs' port arrays and bus state arrays.
+ */
+static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
+ struct xhci_hcd *xhci, u32 port_id)
+{
+ unsigned int i;
+ unsigned int num_similar_speed_ports = 0;
+
+ /* port_id from the hardware is 1-based, but port_array[], usb3_ports[],
+ * and usb2_ports are 0-based indexes. Count the number of similar
+ * speed ports, up to 1 port before this port.
+ */
+ for (i = 0; i < (port_id - 1); i++) {
+ u8 port_speed = xhci->port_array[i];
+
+ /*
+ * Skip ports that don't have known speeds, or have duplicate
+ * Extended Capabilities port speed entries.
+ */
+ if (port_speed == 0 || port_speed == -1)
+ continue;
+
+ /*
+ * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and
+ * 1.1 ports are under the USB 2.0 hub. If the port speed
+ * matches the device speed, it's a similar speed port.
+ */
+ if ((port_speed == 0x03) == (hcd->speed == HCD_USB3))
+ num_similar_speed_ports++;
+ }
+ return num_similar_speed_ports;
+}
+
static void handle_port_status(struct xhci_hcd *xhci,
union xhci_trb *event)
{
- struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ struct usb_hcd *hcd;
u32 port_id;
u32 temp, temp1;
int max_ports;
int slot_id;
unsigned int faked_port_index;
- u32 __iomem *port_array[15 + USB_MAXCHILDREN];
- int i;
+ u8 major_revision;
struct xhci_bus_state *bus_state;
+ u32 __iomem **port_array;
- bus_state = &xhci->bus_state[0];
/* Port status change events always have a successful completion code */
if (GET_COMP_CODE(event->generic.field[2]) != COMP_SUCCESS) {
xhci_warn(xhci, "WARN: xHC returned failed port status event\n");
goto cleanup;
}
- for (i = 0; i < max_ports; i++) {
- if (i < xhci->num_usb3_ports)
- port_array[i] = xhci->usb3_ports[i];
- else
- port_array[i] =
- xhci->usb2_ports[i - xhci->num_usb3_ports];
+ /* Figure out which usb_hcd this port is attached to:
+ * is it a USB 3.0 port or a USB 2.0/1.1 port?
+ */
+ major_revision = xhci->port_array[port_id - 1];
+ if (major_revision == 0) {
+ xhci_warn(xhci, "Event for port %u not in "
+ "Extended Capabilities, ignoring.\n",
+ port_id);
+ goto cleanup;
}
+ if (major_revision == (u8) -1) {
+ xhci_warn(xhci, "Event for port %u duplicated in"
+ "Extended Capabilities, ignoring.\n",
+ port_id);
+ goto cleanup;
+ }
+
+ /*
+ * Hardware port IDs reported by a Port Status Change Event include USB
+ * 3.0 and USB 2.0 ports. We want to check if the port has reported a
+ * resume event, but we first need to translate the hardware port ID
+ * into the index into the ports on the correct split roothub, and the
+ * correct bus_state structure.
+ */
+ /* Find the right roothub. */
+ hcd = xhci_to_hcd(xhci);
+ if ((major_revision == 0x03) != (hcd->speed == HCD_USB3))
+ hcd = xhci->shared_hcd;
+ bus_state = &xhci->bus_state[hcd_index(hcd)];
+ if (hcd->speed == HCD_USB3)
+ port_array = xhci->usb3_ports;
+ else
+ port_array = xhci->usb2_ports;
+ /* Find the faked port hub number */
+ faked_port_index = find_faked_portnum_from_hw_portnum(hcd, xhci,
+ port_id);
- faked_port_index = port_id;
temp = xhci_readl(xhci, port_array[faked_port_index]);
if (hcd->state == HC_STATE_SUSPENDED) {
xhci_dbg(xhci, "resume root hub\n");
xhci_writel(xhci, temp, port_array[faked_port_index]);
} else {
xhci_dbg(xhci, "resume HS port %d\n", port_id);
- bus_state->resume_done[port_id - 1] = jiffies +
+ bus_state->resume_done[faked_port_index] = jiffies +
msecs_to_jiffies(20);
mod_timer(&hcd->rh_timer,
- bus_state->resume_done[port_id - 1]);
+ bus_state->resume_done[faked_port_index]);
/* Do the rest in GetPortStatus */
}
}
spin_unlock(&xhci->lock);
/* Pass this up to the core */
- usb_hcd_poll_rh_status(xhci_to_hcd(xhci));
+ usb_hcd_poll_rh_status(hcd);
spin_lock(&xhci->lock);
}
}
#endif
+static int xhci_run_finished(struct xhci_hcd *xhci)
+{
+ if (xhci_start(xhci)) {
+ xhci_halt(xhci);
+ return -ENODEV;
+ }
+ xhci->shared_hcd->state = HC_STATE_RUNNING;
+
+ if (xhci->quirks & XHCI_NEC_HOST)
+ xhci_ring_cmd_db(xhci);
+
+ xhci_dbg(xhci, "Finished xhci_run for USB3 roothub\n");
+ return 0;
+}
+
/*
* Start the HC after it was halted.
*
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+ /* Start the xHCI host controller running only after the USB 2.0 roothub
+ * is setup.
+ */
+
hcd->uses_new_polling = 1;
+ if (!usb_hcd_is_primary_hcd(hcd))
+ return xhci_run_finished(xhci);
xhci_dbg(xhci, "xhci_run\n");
/* unregister the legacy interrupt */
xhci_queue_vendor_command(xhci, 0, 0, 0,
TRB_TYPE(TRB_NEC_GET_FW));
- if (xhci_start(xhci)) {
- xhci_halt(xhci);
- return -ENODEV;
- }
+ xhci_dbg(xhci, "Finished xhci_run for USB2 roothub\n");
+ return 0;
+}
- if (xhci->quirks & XHCI_NEC_HOST)
- xhci_ring_cmd_db(xhci);
+static void xhci_only_stop_hcd(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- xhci_dbg(xhci, "Finished xhci_run\n");
- return 0;
+ spin_lock_irq(&xhci->lock);
+ xhci_halt(xhci);
+
+ /* The shared_hcd is going to be deallocated shortly (the USB core only
+ * calls this function when allocation fails in usb_add_hcd(), or
+ * usb_remove_hcd() is called). So we need to unset xHCI's pointer.
+ */
+ xhci->shared_hcd = NULL;
+ spin_unlock_irq(&xhci->lock);
}
/*
u32 temp;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ if (!usb_hcd_is_primary_hcd(hcd)) {
+ xhci_only_stop_hcd(xhci->shared_hcd);
+ return;
+ }
+
spin_lock_irq(&xhci->lock);
+ /* Make sure the xHC is halted for a USB3 roothub
+ * (xhci_stop() could be called as part of failed init).
+ */
xhci_halt(xhci);
xhci_reset(xhci);
spin_unlock_irq(&xhci->lock);
* This is called when the machine is rebooting or halting. We assume that the
* machine will be powered off, and the HC's internal state will be reset.
* Don't bother to free memory.
+ *
+ * This will only ever be called with the main usb_hcd (the USB3 roothub).
*/
void xhci_shutdown(struct usb_hcd *hcd)
{
struct usb_hcd *hcd = xhci_to_hcd(xhci);
int retval;
- /* Wait a bit if the bus needs to settle from the transistion to
- * suspend.
+ /* Wait a bit if either of the roothubs need to settle from the
+ * transistion into bus suspend.
*/
- if (time_before(jiffies, xhci->bus_state[0].next_statechange))
+ if (time_before(jiffies, xhci->bus_state[0].next_statechange) ||
+ time_before(jiffies,
+ xhci->bus_state[1].next_statechange))
msleep(100);
spin_lock_irq(&xhci->lock);
static inline unsigned int hcd_index(struct usb_hcd *hcd)
{
- return 0;
+ if (hcd->speed == HCD_USB3)
+ return 0;
+ else
+ return 1;
}
/* There is one ehci_hci structure per controller */
struct xhci_hcd {
struct usb_hcd *main_hcd;
+ struct usb_hcd *shared_hcd;
/* glue to PCI and HCD framework */
struct xhci_cap_regs __iomem *cap_regs;
struct xhci_op_regs __iomem *op_regs;
#define XHCI_LINK_TRB_QUIRK (1 << 0)
#define XHCI_RESET_EP_QUIRK (1 << 1)
#define XHCI_NEC_HOST (1 << 2)
- /* There's only one roothub to keep track of bus suspend info for
- * (right now).
- */
- struct xhci_bus_state bus_state[1];
+ /* There are two roothubs to keep track of bus suspend info for */
+ struct xhci_bus_state bus_state[2];
/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
u8 *port_array;
/* Array of pointers to USB 3.0 PORTSC registers */
projects / linux-beck.git / commitdiff