--- /dev/null
+/*
+ * drivers/serial/netx-serial.c
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_NETX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/arch/netx-regs.h>
+
+/* We've been assigned a range on the "Low-density serial ports" major */
+#define SERIAL_NX_MAJOR 204
+#define MINOR_START 170
+
+#ifdef CONFIG_SERIAL_NETX_CONSOLE
+
+enum uart_regs {
+ UART_DR = 0x00,
+ UART_SR = 0x04,
+ UART_LINE_CR = 0x08,
+ UART_BAUDDIV_MSB = 0x0c,
+ UART_BAUDDIV_LSB = 0x10,
+ UART_CR = 0x14,
+ UART_FR = 0x18,
+ UART_IIR = 0x1c,
+ UART_ILPR = 0x20,
+ UART_RTS_CR = 0x24,
+ UART_RTS_LEAD = 0x28,
+ UART_RTS_TRAIL = 0x2c,
+ UART_DRV_ENABLE = 0x30,
+ UART_BRM_CR = 0x34,
+ UART_RXFIFO_IRQLEVEL = 0x38,
+ UART_TXFIFO_IRQLEVEL = 0x3c,
+};
+
+#define SR_FE (1<<0)
+#define SR_PE (1<<1)
+#define SR_BE (1<<2)
+#define SR_OE (1<<3)
+
+#define LINE_CR_BRK (1<<0)
+#define LINE_CR_PEN (1<<1)
+#define LINE_CR_EPS (1<<2)
+#define LINE_CR_STP2 (1<<3)
+#define LINE_CR_FEN (1<<4)
+#define LINE_CR_5BIT (0<<5)
+#define LINE_CR_6BIT (1<<5)
+#define LINE_CR_7BIT (2<<5)
+#define LINE_CR_8BIT (3<<5)
+#define LINE_CR_BITS_MASK (3<<5)
+
+#define CR_UART_EN (1<<0)
+#define CR_SIREN (1<<1)
+#define CR_SIRLP (1<<2)
+#define CR_MSIE (1<<3)
+#define CR_RIE (1<<4)
+#define CR_TIE (1<<5)
+#define CR_RTIE (1<<6)
+#define CR_LBE (1<<7)
+
+#define FR_CTS (1<<0)
+#define FR_DSR (1<<1)
+#define FR_DCD (1<<2)
+#define FR_BUSY (1<<3)
+#define FR_RXFE (1<<4)
+#define FR_TXFF (1<<5)
+#define FR_RXFF (1<<6)
+#define FR_TXFE (1<<7)
+
+#define IIR_MIS (1<<0)
+#define IIR_RIS (1<<1)
+#define IIR_TIS (1<<2)
+#define IIR_RTIS (1<<3)
+#define IIR_MASK 0xf
+
+#define RTS_CR_AUTO (1<<0)
+#define RTS_CR_RTS (1<<1)
+#define RTS_CR_COUNT (1<<2)
+#define RTS_CR_MOD2 (1<<3)
+#define RTS_CR_RTS_POL (1<<4)
+#define RTS_CR_CTS_CTR (1<<5)
+#define RTS_CR_CTS_POL (1<<6)
+#define RTS_CR_STICK (1<<7)
+
+#define UART_PORT_SIZE 0x40
+#define DRIVER_NAME "netx-uart"
+
+struct netx_port {
+ struct uart_port port;
+};
+
+static void netx_stop_tx(struct uart_port *port)
+{
+ unsigned int val;
+ val = readl(port->membase + UART_CR);
+ writel(val & ~CR_TIE, port->membase + UART_CR);
+}
+
+static void netx_stop_rx(struct uart_port *port)
+{
+ unsigned int val;
+ val = readl(port->membase + UART_CR);
+ writel(val & ~CR_RIE, port->membase + UART_CR);
+}
+
+static void netx_enable_ms(struct uart_port *port)
+{
+ unsigned int val;
+ val = readl(port->membase + UART_CR);
+ writel(val | CR_MSIE, port->membase + UART_CR);
+}
+
+static inline void netx_transmit_buffer(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+
+ if (port->x_char) {
+ writel(port->x_char, port->membase + UART_DR);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_tx_stopped(port) || uart_circ_empty(xmit)) {
+ netx_stop_tx(port);
+ return;
+ }
+
+ do {
+ /* send xmit->buf[xmit->tail]
+ * out the port here */
+ writel(xmit->buf[xmit->tail], port->membase + UART_DR);
+ xmit->tail = (xmit->tail + 1) &
+ (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (!(readl(port->membase + UART_FR) & FR_TXFF));
+
+ if (uart_circ_empty(xmit))
+ netx_stop_tx(port);
+}
+
+static void netx_start_tx(struct uart_port *port)
+{
+ writel(
+ readl(port->membase + UART_CR) | CR_TIE, port->membase + UART_CR);
+
+ if (!(readl(port->membase + UART_FR) & FR_TXFF))
+ netx_transmit_buffer(port);
+}
+
+static unsigned int netx_tx_empty(struct uart_port *port)
+{
+ return readl(port->membase + UART_FR) & FR_BUSY ? 0 : TIOCSER_TEMT;
+}
+
+static void netx_txint(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ netx_stop_tx(port);
+ return;
+ }
+
+ netx_transmit_buffer(port);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static void netx_rxint(struct uart_port *port, struct pt_regs *regs)
+{
+ unsigned char rx, flg, status;
+ struct tty_struct *tty = port->info->tty;
+
+ while (!(readl(port->membase + UART_FR) & FR_RXFE)) {
+ rx = readl(port->membase + UART_DR);
+ flg = TTY_NORMAL;
+ port->icount.rx++;
+ status = readl(port->membase + UART_SR);
+ if (status & SR_BE) {
+ writel(0, port->membase + UART_SR);
+ if (uart_handle_break(port))
+ continue;
+ }
+
+ if (unlikely(status & (SR_FE | SR_PE | SR_OE))) {
+
+ if (status & SR_PE)
+ port->icount.parity++;
+ else if (status & SR_FE)
+ port->icount.frame++;
+ if (status & SR_OE)
+ port->icount.overrun++;
+
+ status &= port->read_status_mask;
+
+ if (status & SR_BE)
+ flg = TTY_BREAK;
+ else if (status & SR_PE)
+ flg = TTY_PARITY;
+ else if (status & SR_FE)
+ flg = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(port, rx, regs))
+ continue;
+
+ uart_insert_char(port, status, SR_OE, rx, flg);
+ }
+
+ tty_flip_buffer_push(tty);
+ return;
+}
+
+static irqreturn_t netx_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_port *port = (struct uart_port *)dev_id;
+ unsigned long flags;
+ unsigned char status;
+
+ spin_lock_irqsave(&port->lock,flags);
+
+ status = readl(port->membase + UART_IIR) & IIR_MASK;
+ while (status) {
+ if (status & IIR_RIS)
+ netx_rxint(port, regs);
+ if (status & IIR_TIS)
+ netx_txint(port);
+ if (status & IIR_MIS) {
+ if (readl(port->membase + UART_FR) & FR_CTS)
+ uart_handle_cts_change(port, 1);
+ else
+ uart_handle_cts_change(port, 0);
+ }
+ writel(0, port->membase + UART_IIR);
+ status = readl(port->membase + UART_IIR) & IIR_MASK;
+ }
+
+ spin_unlock_irqrestore(&port->lock,flags);
+ return IRQ_HANDLED;
+}
+
+static unsigned int netx_get_mctrl(struct uart_port *port)
+{
+ unsigned int ret = TIOCM_DSR | TIOCM_CAR;
+
+ if (readl(port->membase + UART_FR) & FR_CTS)
+ ret |= TIOCM_CTS;
+
+ return ret;
+}
+
+static void netx_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ unsigned int val;
+
+ if (mctrl & TIOCM_RTS) {
+ val = readl(port->membase + UART_RTS_CR);
+ writel(val | RTS_CR_RTS, port->membase + UART_RTS_CR);
+ }
+}
+
+static void netx_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned int line_cr;
+ spin_lock_irq(&port->lock);
+
+ line_cr = readl(port->membase + UART_LINE_CR);
+ if (break_state != 0)
+ line_cr |= LINE_CR_BRK;
+ else
+ line_cr &= ~LINE_CR_BRK;
+ writel(line_cr, port->membase + UART_LINE_CR);
+
+ spin_unlock_irq(&port->lock);
+}
+
+static int netx_startup(struct uart_port *port)
+{
+ int ret;
+
+ ret = request_irq(port->irq, netx_int, 0,
+ DRIVER_NAME, port);
+ if (ret) {
+ dev_err(port->dev, "unable to grab irq%d\n",port->irq);
+ goto exit;
+ }
+
+ writel(readl(port->membase + UART_LINE_CR) | LINE_CR_FEN,
+ port->membase + UART_LINE_CR);
+
+ writel(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE | CR_UART_EN,
+ port->membase + UART_CR);
+
+exit:
+ return ret;
+}
+
+static void netx_shutdown(struct uart_port *port)
+{
+ writel(0, port->membase + UART_CR) ;
+
+ free_irq(port->irq, port);
+}
+
+static void
+netx_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ unsigned int baud, quot;
+ unsigned char old_cr;
+ unsigned char line_cr = LINE_CR_FEN;
+ unsigned char rts_cr = 0;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ line_cr |= LINE_CR_5BIT;
+ break;
+ case CS6:
+ line_cr |= LINE_CR_6BIT;
+ break;
+ case CS7:
+ line_cr |= LINE_CR_7BIT;
+ break;
+ case CS8:
+ line_cr |= LINE_CR_8BIT;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ line_cr |= LINE_CR_STP2;
+
+ if (termios->c_cflag & PARENB) {
+ line_cr |= LINE_CR_PEN;
+ if (!(termios->c_cflag & PARODD))
+ line_cr |= LINE_CR_EPS;
+ }
+
+ if (termios->c_cflag & CRTSCTS)
+ rts_cr = RTS_CR_AUTO | RTS_CR_CTS_CTR | RTS_CR_RTS_POL;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = baud * 4096;
+ quot /= 1000;
+ quot *= 256;
+ quot /= 100000;
+
+ spin_lock_irq(&port->lock);
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ old_cr = readl(port->membase + UART_CR);
+
+ /* disable interrupts */
+ writel(old_cr & ~(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE),
+ port->membase + UART_CR);
+
+ /* drain transmitter */
+ while (readl(port->membase + UART_FR) & FR_BUSY);
+
+ /* disable UART */
+ writel(old_cr & ~CR_UART_EN, port->membase + UART_CR);
+
+ /* modem status interrupts */
+ old_cr &= ~CR_MSIE;
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ old_cr |= CR_MSIE;
+
+ writel((quot>>8) & 0xff, port->membase + UART_BAUDDIV_MSB);
+ writel(quot & 0xff, port->membase + UART_BAUDDIV_LSB);
+ writel(line_cr, port->membase + UART_LINE_CR);
+
+ writel(rts_cr, port->membase + UART_RTS_CR);
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= SR_PE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= SR_BE;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= SR_PE;
+ }
+
+ port->read_status_mask = 0;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= SR_BE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= SR_PE | SR_FE;
+
+ writel(old_cr, port->membase + UART_CR);
+
+ spin_unlock_irq(&port->lock);
+}
+
+static const char *netx_type(struct uart_port *port)
+{
+ return port->type == PORT_NETX ? "NETX" : NULL;
+}
+
+static void netx_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, UART_PORT_SIZE);
+}
+
+static int netx_request_port(struct uart_port *port)
+{
+ return request_mem_region(port->mapbase, UART_PORT_SIZE,
+ DRIVER_NAME) != NULL ? 0 : -EBUSY;
+}
+
+static void netx_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE && netx_request_port(port) == 0)
+ port->type = PORT_NETX;
+}
+
+static int
+netx_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_NETX)
+ ret = -EINVAL;
+
+ return ret;
+}
+
+static struct uart_ops netx_pops = {
+ .tx_empty = netx_tx_empty,
+ .set_mctrl = netx_set_mctrl,
+ .get_mctrl = netx_get_mctrl,
+ .stop_tx = netx_stop_tx,
+ .start_tx = netx_start_tx,
+ .stop_rx = netx_stop_rx,
+ .enable_ms = netx_enable_ms,
+ .break_ctl = netx_break_ctl,
+ .startup = netx_startup,
+ .shutdown = netx_shutdown,
+ .set_termios = netx_set_termios,
+ .type = netx_type,
+ .release_port = netx_release_port,
+ .request_port = netx_request_port,
+ .config_port = netx_config_port,
+ .verify_port = netx_verify_port,
+};
+
+static struct netx_port netx_ports[] = {
+ {
+ .port = {
+ .type = PORT_NETX,
+ .iotype = UPIO_MEM,
+ .membase = (char __iomem *)io_p2v(NETX_PA_UART0),
+ .mapbase = NETX_PA_UART0,
+ .irq = NETX_IRQ_UART0,
+ .uartclk = 100000000,
+ .fifosize = 16,
+ .flags = UPF_BOOT_AUTOCONF,
+ .ops = &netx_pops,
+ .line = 0,
+ },
+ }, {
+ .port = {
+ .type = PORT_NETX,
+ .iotype = UPIO_MEM,
+ .membase = (char __iomem *)io_p2v(NETX_PA_UART1),
+ .mapbase = NETX_PA_UART1,
+ .irq = NETX_IRQ_UART1,
+ .uartclk = 100000000,
+ .fifosize = 16,
+ .flags = UPF_BOOT_AUTOCONF,
+ .ops = &netx_pops,
+ .line = 1,
+ },
+ }, {
+ .port = {
+ .type = PORT_NETX,
+ .iotype = UPIO_MEM,
+ .membase = (char __iomem *)io_p2v(NETX_PA_UART2),
+ .mapbase = NETX_PA_UART2,
+ .irq = NETX_IRQ_UART2,
+ .uartclk = 100000000,
+ .fifosize = 16,
+ .flags = UPF_BOOT_AUTOCONF,
+ .ops = &netx_pops,
+ .line = 2,
+ },
+ }
+};
+
+static void netx_console_putchar(struct uart_port *port, int ch)
+{
+ while (readl(port->membase + UART_FR) & FR_BUSY);
+ writel(ch, port->membase + UART_DR);
+}
+
+static void
+netx_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_port *port = &netx_ports[co->index].port;
+ unsigned char cr_save;
+
+ cr_save = readl(port->membase + UART_CR);
+ writel(cr_save | CR_UART_EN, port->membase + UART_CR);
+
+ uart_console_write(port, s, count, netx_console_putchar);
+
+ while (readl(port->membase + UART_FR) & FR_BUSY);
+ writel(cr_save, port->membase + UART_CR);
+}
+
+static void __init
+netx_console_get_options(struct uart_port *port, int *baud,
+ int *parity, int *bits, int *flow)
+{
+ unsigned char line_cr;
+
+ *baud = (readl(port->membase + UART_BAUDDIV_MSB) << 8) |
+ readl(port->membase + UART_BAUDDIV_LSB);
+ *baud *= 1000;
+ *baud /= 4096;
+ *baud *= 1000;
+ *baud /= 256;
+ *baud *= 100;
+
+ line_cr = readl(port->membase + UART_LINE_CR);
+ *parity = 'n';
+ if (line_cr & LINE_CR_PEN) {
+ if (line_cr & LINE_CR_EPS)
+ *parity = 'e';
+ else
+ *parity = 'o';
+ }
+
+ switch (line_cr & LINE_CR_BITS_MASK) {
+ case LINE_CR_8BIT:
+ *bits = 8;
+ break;
+ case LINE_CR_7BIT:
+ *bits = 7;
+ break;
+ case LINE_CR_6BIT:
+ *bits = 6;
+ break;
+ case LINE_CR_5BIT:
+ *bits = 5;
+ break;
+ }
+
+ if (readl(port->membase + UART_RTS_CR) & RTS_CR_AUTO)
+ *flow = 'r';
+}
+
+static int __init
+netx_console_setup(struct console *co, char *options)
+{
+ struct netx_port *sport;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index == -1 || co->index >= ARRAY_SIZE(netx_ports))
+ co->index = 0;
+ sport = &netx_ports[co->index];
+
+ if (options) {
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ } else {
+ /* if the UART is enabled, assume it has been correctly setup
+ * by the bootloader and get the options
+ */
+ if (readl(sport->port.membase + UART_CR) & CR_UART_EN) {
+ netx_console_get_options(&sport->port, &baud,
+ &parity, &bits, &flow);
+ }
+
+ }
+
+ return uart_set_options(&sport->port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver netx_reg;
+static struct console netx_console = {
+ .name = "ttyNX",
+ .write = netx_console_write,
+ .device = uart_console_device,
+ .setup = netx_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &netx_reg,
+};
+
+static int __init netx_console_init(void)
+{
+ register_console(&netx_console);
+ return 0;
+}
+console_initcall(netx_console_init);
+
+#define NETX_CONSOLE &netx_console
+#else
+#define NETX_CONSOLE NULL
+#endif
+
+static struct uart_driver netx_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = DRIVER_NAME,
+ .dev_name = "ttyNX",
+ .major = SERIAL_NX_MAJOR,
+ .minor = MINOR_START,
+ .nr = ARRAY_SIZE(netx_ports),
+ .cons = NETX_CONSOLE,
+};
+
+static int serial_netx_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct netx_port *sport = platform_get_drvdata(pdev);
+
+ if (sport)
+ uart_suspend_port(&netx_reg, &sport->port);
+
+ return 0;
+}
+
+static int serial_netx_resume(struct platform_device *pdev)
+{
+ struct netx_port *sport = platform_get_drvdata(pdev);
+
+ if (sport)
+ uart_resume_port(&netx_reg, &sport->port);
+
+ return 0;
+}
+
+static int serial_netx_probe(struct platform_device *pdev)
+{
+ struct uart_port *port = &netx_ports[pdev->id].port;
+
+ dev_info(&pdev->dev, "initialising\n");
+
+ port->dev = &pdev->dev;
+
+ writel(1, port->membase + UART_RXFIFO_IRQLEVEL);
+ uart_add_one_port(&netx_reg, &netx_ports[pdev->id].port);
+ platform_set_drvdata(pdev, &netx_ports[pdev->id]);
+
+ return 0;
+}
+
+static int serial_netx_remove(struct platform_device *pdev)
+{
+ struct netx_port *sport = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (sport)
+ uart_remove_one_port(&netx_reg, &sport->port);
+
+ return 0;
+}
+
+static struct platform_driver serial_netx_driver = {
+ .probe = serial_netx_probe,
+ .remove = serial_netx_remove,
+
+ .suspend = serial_netx_suspend,
+ .resume = serial_netx_resume,
+
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init netx_serial_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "Serial: NetX driver\n");
+
+ ret = uart_register_driver(&netx_reg);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&serial_netx_driver);
+ if (ret != 0)
+ uart_unregister_driver(&netx_reg);
+
+ return 0;
+}
+
+static void __exit netx_serial_exit(void)
+{
+ platform_driver_unregister(&serial_netx_driver);
+ uart_unregister_driver(&netx_reg);
+}
+
+module_init(netx_serial_init);
+module_exit(netx_serial_exit);
+
+MODULE_AUTHOR("Sascha Hauer");
+MODULE_DESCRIPTION("NetX serial port driver");
+MODULE_LICENSE("GPL");