#include "../comedidev.h"
#include "comedi_fc.h"
-#include "rtd520.h"
#include "plx9080.h"
+/*
+ * Local Address Space 0 Offsets
+ */
+#define LAS0_USER_IO 0x0008 /* User I/O */
+#define LAS0_ADC 0x0010 /* FIFO Status/Software A/D Start */
+#define FS_DAC1_NOT_EMPTY (1 << 0) /* DAC1 FIFO not empty */
+#define FS_DAC1_HEMPTY (1 << 1) /* DAC1 FIFO half empty */
+#define FS_DAC1_NOT_FULL (1 << 2) /* DAC1 FIFO not full */
+#define FS_DAC2_NOT_EMPTY (1 << 4) /* DAC2 FIFO not empty */
+#define FS_DAC2_HEMPTY (1 << 5) /* DAC2 FIFO half empty */
+#define FS_DAC2_NOT_FULL (1 << 6) /* DAC2 FIFO not full */
+#define FS_ADC_NOT_EMPTY (1 << 8) /* ADC FIFO not empty */
+#define FS_ADC_HEMPTY (1 << 9) /* ADC FIFO half empty */
+#define FS_ADC_NOT_FULL (1 << 10) /* ADC FIFO not full */
+#define FS_DIN_NOT_EMPTY (1 << 12) /* DIN FIFO not empty */
+#define FS_DIN_HEMPTY (1 << 13) /* DIN FIFO half empty */
+#define FS_DIN_NOT_FULL (1 << 14) /* DIN FIFO not full */
+#define LAS0_DAC1 0x0014 /* Software D/A1 Update (w) */
+#define LAS0_DAC2 0x0018 /* Software D/A2 Update (w) */
+#define LAS0_DAC 0x0024 /* Software Simultaneous Update (w) */
+#define LAS0_PACER 0x0028 /* Software Pacer Start/Stop */
+#define LAS0_TIMER 0x002c /* Timer Status/HDIN Software Trig. */
+#define LAS0_IT 0x0030 /* Interrupt Status/Enable */
+#define IRQM_ADC_FIFO_WRITE (1 << 0) /* ADC FIFO Write */
+#define IRQM_CGT_RESET (1 << 1) /* Reset CGT */
+#define IRQM_CGT_PAUSE (1 << 3) /* Pause CGT */
+#define IRQM_ADC_ABOUT_CNT (1 << 4) /* About Counter out */
+#define IRQM_ADC_DELAY_CNT (1 << 5) /* Delay Counter out */
+#define IRQM_ADC_SAMPLE_CNT (1 << 6) /* ADC Sample Counter */
+#define IRQM_DAC1_UCNT (1 << 7) /* DAC1 Update Counter */
+#define IRQM_DAC2_UCNT (1 << 8) /* DAC2 Update Counter */
+#define IRQM_UTC1 (1 << 9) /* User TC1 out */
+#define IRQM_UTC1_INV (1 << 10) /* User TC1 out, inverted */
+#define IRQM_UTC2 (1 << 11) /* User TC2 out */
+#define IRQM_DIGITAL_IT (1 << 12) /* Digital Interrupt */
+#define IRQM_EXTERNAL_IT (1 << 13) /* External Interrupt */
+#define IRQM_ETRIG_RISING (1 << 14) /* Ext Trigger rising-edge */
+#define IRQM_ETRIG_FALLING (1 << 15) /* Ext Trigger falling-edge */
+#define LAS0_CLEAR 0x0034 /* Clear/Set Interrupt Clear Mask */
+#define LAS0_OVERRUN 0x0038 /* Pending interrupts/Clear Overrun */
+#define LAS0_PCLK 0x0040 /* Pacer Clock (24bit) */
+#define LAS0_BCLK 0x0044 /* Burst Clock (10bit) */
+#define LAS0_ADC_SCNT 0x0048 /* A/D Sample counter (10bit) */
+#define LAS0_DAC1_UCNT 0x004c /* D/A1 Update counter (10 bit) */
+#define LAS0_DAC2_UCNT 0x0050 /* D/A2 Update counter (10 bit) */
+#define LAS0_DCNT 0x0054 /* Delay counter (16 bit) */
+#define LAS0_ACNT 0x0058 /* About counter (16 bit) */
+#define LAS0_DAC_CLK 0x005c /* DAC clock (16bit) */
+#define LAS0_UTC0 0x0060 /* 8254 TC Counter 0 */
+#define LAS0_UTC1 0x0064 /* 8254 TC Counter 1 */
+#define LAS0_UTC2 0x0068 /* 8254 TC Counter 2 */
+#define LAS0_UTC_CTRL 0x006c /* 8254 TC Control */
+#define LAS0_DIO0 0x0070 /* Digital I/O Port 0 */
+#define LAS0_DIO1 0x0074 /* Digital I/O Port 1 */
+#define LAS0_DIO0_CTRL 0x0078 /* Digital I/O Control */
+#define LAS0_DIO_STATUS 0x007c /* Digital I/O Status */
+#define LAS0_BOARD_RESET 0x0100 /* Board reset */
+#define LAS0_DMA0_SRC 0x0104 /* DMA 0 Sources select */
+#define LAS0_DMA1_SRC 0x0108 /* DMA 1 Sources select */
+#define LAS0_ADC_CONVERSION 0x010c /* A/D Conversion Signal select */
+#define LAS0_BURST_START 0x0110 /* Burst Clock Start Trigger select */
+#define LAS0_PACER_START 0x0114 /* Pacer Clock Start Trigger select */
+#define LAS0_PACER_STOP 0x0118 /* Pacer Clock Stop Trigger select */
+#define LAS0_ACNT_STOP_ENABLE 0x011c /* About Counter Stop Enable */
+#define LAS0_PACER_REPEAT 0x0120 /* Pacer Start Trigger Mode select */
+#define LAS0_DIN_START 0x0124 /* HiSpd DI Sampling Signal select */
+#define LAS0_DIN_FIFO_CLEAR 0x0128 /* Digital Input FIFO Clear */
+#define LAS0_ADC_FIFO_CLEAR 0x012c /* A/D FIFO Clear */
+#define LAS0_CGT_WRITE 0x0130 /* Channel Gain Table Write */
+#define LAS0_CGL_WRITE 0x0134 /* Channel Gain Latch Write */
+#define LAS0_CG_DATA 0x0138 /* Digital Table Write */
+#define LAS0_CGT_ENABLE 0x013c /* Channel Gain Table Enable */
+#define LAS0_CG_ENABLE 0x0140 /* Digital Table Enable */
+#define LAS0_CGT_PAUSE 0x0144 /* Table Pause Enable */
+#define LAS0_CGT_RESET 0x0148 /* Reset Channel Gain Table */
+#define LAS0_CGT_CLEAR 0x014c /* Clear Channel Gain Table */
+#define LAS0_DAC1_CTRL 0x0150 /* D/A1 output type/range */
+#define LAS0_DAC1_SRC 0x0154 /* D/A1 update source */
+#define LAS0_DAC1_CYCLE 0x0158 /* D/A1 cycle mode */
+#define LAS0_DAC1_RESET 0x015c /* D/A1 FIFO reset */
+#define LAS0_DAC1_FIFO_CLEAR 0x0160 /* D/A1 FIFO clear */
+#define LAS0_DAC2_CTRL 0x0164 /* D/A2 output type/range */
+#define LAS0_DAC2_SRC 0x0168 /* D/A2 update source */
+#define LAS0_DAC2_CYCLE 0x016c /* D/A2 cycle mode */
+#define LAS0_DAC2_RESET 0x0170 /* D/A2 FIFO reset */
+#define LAS0_DAC2_FIFO_CLEAR 0x0174 /* D/A2 FIFO clear */
+#define LAS0_ADC_SCNT_SRC 0x0178 /* A/D Sample Counter Source select */
+#define LAS0_PACER_SELECT 0x0180 /* Pacer Clock select */
+#define LAS0_SBUS0_SRC 0x0184 /* SyncBus 0 Source select */
+#define LAS0_SBUS0_ENABLE 0x0188 /* SyncBus 0 enable */
+#define LAS0_SBUS1_SRC 0x018c /* SyncBus 1 Source select */
+#define LAS0_SBUS1_ENABLE 0x0190 /* SyncBus 1 enable */
+#define LAS0_SBUS2_SRC 0x0198 /* SyncBus 2 Source select */
+#define LAS0_SBUS2_ENABLE 0x019c /* SyncBus 2 enable */
+#define LAS0_ETRG_POLARITY 0x01a4 /* Ext. Trigger polarity select */
+#define LAS0_EINT_POLARITY 0x01a8 /* Ext. Interrupt polarity select */
+#define LAS0_UTC0_CLOCK 0x01ac /* UTC0 Clock select */
+#define LAS0_UTC0_GATE 0x01b0 /* UTC0 Gate select */
+#define LAS0_UTC1_CLOCK 0x01b4 /* UTC1 Clock select */
+#define LAS0_UTC1_GATE 0x01b8 /* UTC1 Gate select */
+#define LAS0_UTC2_CLOCK 0x01bc /* UTC2 Clock select */
+#define LAS0_UTC2_GATE 0x01c0 /* UTC2 Gate select */
+#define LAS0_UOUT0_SELECT 0x01c4 /* User Output 0 source select */
+#define LAS0_UOUT1_SELECT 0x01c8 /* User Output 1 source select */
+#define LAS0_DMA0_RESET 0x01cc /* DMA0 Request state machine reset */
+#define LAS0_DMA1_RESET 0x01d0 /* DMA1 Request state machine reset */
+
+/*
+ * Local Address Space 1 Offsets
+ */
+#define LAS1_ADC_FIFO 0x0000 /* A/D FIFO (16bit) */
+#define LAS1_HDIO_FIFO 0x0004 /* HiSpd DI FIFO (16bit) */
+#define LAS1_DAC1_FIFO 0x0008 /* D/A1 FIFO (16bit) */
+#define LAS1_DAC2_FIFO 0x000c /* D/A2 FIFO (16bit) */
+
/*======================================================================
Driver specific stuff (tunable)
======================================================================*/
+++ /dev/null
-/*
- comedi/drivers/rtd520.h
- Comedi driver defines for Real Time Devices (RTD) PCI4520/DM7520
-
- COMEDI - Linux Control and Measurement Device Interface
- Copyright (C) 2001 David A. Schleef <ds@schleef.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/*
- Created by Dan Christian, NASA Ames Research Center.
- See board notes in rtd520.c
-*/
-
-/*
- * Local Address Space 0 Offsets
- */
-#define LAS0_USER_IO 0x0008 /* User I/O */
-#define LAS0_ADC 0x0010 /* FIFO Status/Software A/D Start */
-#define LAS0_DAC1 0x0014 /* Software D/A1 Update (w) */
-#define LAS0_DAC2 0x0018 /* Software D/A2 Update (w) */
-#define LAS0_DAC 0x0024 /* Software Simultaneous Update (w) */
-#define LAS0_PACER 0x0028 /* Software Pacer Start/Stop */
-#define LAS0_TIMER 0x002c /* Timer Status/HDIN Software Trig. */
-#define LAS0_IT 0x0030 /* Interrupt Status/Enable */
-#define LAS0_CLEAR 0x0034 /* Clear/Set Interrupt Clear Mask */
-#define LAS0_OVERRUN 0x0038 /* Pending interrupts/Clear Overrun */
-#define LAS0_PCLK 0x0040 /* Pacer Clock (24bit) */
-#define LAS0_BCLK 0x0044 /* Burst Clock (10bit) */
-#define LAS0_ADC_SCNT 0x0048 /* A/D Sample counter (10bit) */
-#define LAS0_DAC1_UCNT 0x004c /* D/A1 Update counter (10 bit) */
-#define LAS0_DAC2_UCNT 0x0050 /* D/A2 Update counter (10 bit) */
-#define LAS0_DCNT 0x0054 /* Delay counter (16 bit) */
-#define LAS0_ACNT 0x0058 /* About counter (16 bit) */
-#define LAS0_DAC_CLK 0x005c /* DAC clock (16bit) */
-#define LAS0_UTC0 0x0060 /* 8254 TC Counter 0 */
-#define LAS0_UTC1 0x0064 /* 8254 TC Counter 1 */
-#define LAS0_UTC2 0x0068 /* 8254 TC Counter 2 */
-#define LAS0_UTC_CTRL 0x006c /* 8254 TC Control */
-#define LAS0_DIO0 0x0070 /* Digital I/O Port 0 */
-#define LAS0_DIO1 0x0074 /* Digital I/O Port 1 */
-#define LAS0_DIO0_CTRL 0x0078 /* Digital I/O Control */
-#define LAS0_DIO_STATUS 0x007c /* Digital I/O Status */
-#define LAS0_BOARD_RESET 0x0100 /* Board reset */
-#define LAS0_DMA0_SRC 0x0104 /* DMA 0 Sources select */
-#define LAS0_DMA1_SRC 0x0108 /* DMA 1 Sources select */
-#define LAS0_ADC_CONVERSION 0x010c /* A/D Conversion Signal select */
-#define LAS0_BURST_START 0x0110 /* Burst Clock Start Trigger select */
-#define LAS0_PACER_START 0x0114 /* Pacer Clock Start Trigger select */
-#define LAS0_PACER_STOP 0x0118 /* Pacer Clock Stop Trigger select */
-#define LAS0_ACNT_STOP_ENABLE 0x011c /* About Counter Stop Enable */
-#define LAS0_PACER_REPEAT 0x0120 /* Pacer Start Trigger Mode select */
-#define LAS0_DIN_START 0x0124 /* HiSpd DI Sampling Signal select */
-#define LAS0_DIN_FIFO_CLEAR 0x0128 /* Digital Input FIFO Clear */
-#define LAS0_ADC_FIFO_CLEAR 0x012c /* A/D FIFO Clear */
-#define LAS0_CGT_WRITE 0x0130 /* Channel Gain Table Write */
-#define LAS0_CGL_WRITE 0x0134 /* Channel Gain Latch Write */
-#define LAS0_CG_DATA 0x0138 /* Digital Table Write */
-#define LAS0_CGT_ENABLE 0x013c /* Channel Gain Table Enable */
-#define LAS0_CG_ENABLE 0x0140 /* Digital Table Enable */
-#define LAS0_CGT_PAUSE 0x0144 /* Table Pause Enable */
-#define LAS0_CGT_RESET 0x0148 /* Reset Channel Gain Table */
-#define LAS0_CGT_CLEAR 0x014c /* Clear Channel Gain Table */
-#define LAS0_DAC1_CTRL 0x0150 /* D/A1 output type/range */
-#define LAS0_DAC1_SRC 0x0154 /* D/A1 update source */
-#define LAS0_DAC1_CYCLE 0x0158 /* D/A1 cycle mode */
-#define LAS0_DAC1_RESET 0x015c /* D/A1 FIFO reset */
-#define LAS0_DAC1_FIFO_CLEAR 0x0160 /* D/A1 FIFO clear */
-#define LAS0_DAC2_CTRL 0x0164 /* D/A2 output type/range */
-#define LAS0_DAC2_SRC 0x0168 /* D/A2 update source */
-#define LAS0_DAC2_CYCLE 0x016c /* D/A2 cycle mode */
-#define LAS0_DAC2_RESET 0x0170 /* D/A2 FIFO reset */
-#define LAS0_DAC2_FIFO_CLEAR 0x0174 /* D/A2 FIFO clear */
-#define LAS0_ADC_SCNT_SRC 0x0178 /* A/D Sample Counter Source select */
-#define LAS0_PACER_SELECT 0x0180 /* Pacer Clock select */
-#define LAS0_SBUS0_SRC 0x0184 /* SyncBus 0 Source select */
-#define LAS0_SBUS0_ENABLE 0x0188 /* SyncBus 0 enable */
-#define LAS0_SBUS1_SRC 0x018c /* SyncBus 1 Source select */
-#define LAS0_SBUS1_ENABLE 0x0190 /* SyncBus 1 enable */
-#define LAS0_SBUS2_SRC 0x0198 /* SyncBus 2 Source select */
-#define LAS0_SBUS2_ENABLE 0x019c /* SyncBus 2 enable */
-#define LAS0_ETRG_POLARITY 0x01a4 /* Ext. Trigger polarity select */
-#define LAS0_EINT_POLARITY 0x01a8 /* Ext. Interrupt polarity select */
-#define LAS0_UTC0_CLOCK 0x01ac /* UTC0 Clock select */
-#define LAS0_UTC0_GATE 0x01b0 /* UTC0 Gate select */
-#define LAS0_UTC1_CLOCK 0x01b4 /* UTC1 Clock select */
-#define LAS0_UTC1_GATE 0x01b8 /* UTC1 Gate select */
-#define LAS0_UTC2_CLOCK 0x01bc /* UTC2 Clock select */
-#define LAS0_UTC2_GATE 0x01c0 /* UTC2 Gate select */
-#define LAS0_UOUT0_SELECT 0x01c4 /* User Output 0 source select */
-#define LAS0_UOUT1_SELECT 0x01c8 /* User Output 1 source select */
-#define LAS0_DMA0_RESET 0x01cc /* DMA0 Request state machine reset */
-#define LAS0_DMA1_RESET 0x01d0 /* DMA1 Request state machine reset */
-
-/*
- * Local Address Space 1 Offsets
- */
-#define LAS1_ADC_FIFO 0x0000 /* A/D FIFO (16bit) */
-#define LAS1_HDIO_FIFO 0x0004 /* HiSpd DI FIFO (16bit) */
-#define LAS1_DAC1_FIFO 0x0008 /* D/A1 FIFO (16bit) */
-#define LAS1_DAC2_FIFO 0x000c /* D/A2 FIFO (16bit) */
-
-/* FIFO Status Word Bits (RtdFifoStatus) */
-#define FS_DAC1_NOT_EMPTY (1 << 0) /* DAC1 FIFO not empty */
-#define FS_DAC1_HEMPTY (1 << 1) /* DAC1 FIFO half empty */
-#define FS_DAC1_NOT_FULL (1 << 2) /* DAC1 FIFO not full */
-#define FS_DAC2_NOT_EMPTY (1 << 4) /* DAC2 FIFO not empty */
-#define FS_DAC2_HEMPTY (1 << 5) /* DAC2 FIFO half empty */
-#define FS_DAC2_NOT_FULL (1 << 6) /* DAC2 FIFO not full */
-#define FS_ADC_NOT_EMPTY (1 << 8) /* ADC FIFO not empty */
-#define FS_ADC_HEMPTY (1 << 9) /* ADC FIFO half empty */
-#define FS_ADC_NOT_FULL (1 << 10) /* ADC FIFO not full */
-#define FS_DIN_NOT_EMPTY (1 << 12) /* DIN FIFO not empty */
-#define FS_DIN_HEMPTY (1 << 13) /* DIN FIFO half empty */
-#define FS_DIN_NOT_FULL (1 << 14) /* DIN FIFO not full */
-
-/* Interrupt Source Masks (SetITMask, ClearITMask, GetITStatus) */
-#define IRQM_ADC_FIFO_WRITE 0x0001 /* ADC FIFO Write */
-#define IRQM_CGT_RESET 0x0002 /* Reset CGT */
-#define IRQM_CGT_PAUSE 0x0008 /* Pause CGT */
-#define IRQM_ADC_ABOUT_CNT 0x0010 /* About Counter out */
-#define IRQM_ADC_DELAY_CNT 0x0020 /* Delay Counter out */
-#define IRQM_ADC_SAMPLE_CNT 0x0040 /* ADC Sample Counter */
-#define IRQM_DAC1_UCNT 0x0080 /* DAC1 Update Counter */
-#define IRQM_DAC2_UCNT 0x0100 /* DAC2 Update Counter */
-#define IRQM_UTC1 0x0200 /* User TC1 out */
-#define IRQM_UTC1_INV 0x0400 /* User TC1 out, inverted */
-#define IRQM_UTC2 0x0800 /* User TC2 out */
-#define IRQM_DIGITAL_IT 0x1000 /* Digital Interrupt */
-#define IRQM_EXTERNAL_IT 0x2000 /* External Interrupt */
-#define IRQM_ETRIG_RISING 0x4000 /* External Trigger rising-edge */
-#define IRQM_ETRIG_FALLING 0x8000 /* External Trigger falling-edge */
projects / linux-beck.git / commitdiff