DP MST provides the capability to send multiple video and audio streams
through a single port. This requires the API's between i915 and audio
drivers to distinguish between multiple audio capable displays that can be
connected to a port. Currently only the port identity is shared in the
APIs. This patch adds support for MST with an additional parameter
'int pipe'. The existing parameter 'port' does not change it's meaning.
pipe =
MST : display pipe that the stream originates from
Non-MST : -1
Affected APIs:
struct i915_audio_component_ops
- int (*sync_audio_rate)(struct device *, int port, int rate);
+ int (*sync_audio_rate)(struct device *, int port, int pipe,
+ int rate);
- int (*get_eld)(struct device *, int port, bool *enabled,
- unsigned char *buf, int max_bytes);
+ int (*get_eld)(struct device *, int port, int pipe,
+ bool *enabled, unsigned char *buf, int max_bytes);
struct i915_audio_component_audio_ops
- void (*pin_eld_notify)(void *audio_ptr, int port);
+ void (*pin_eld_notify)(void *audio_ptr, int port, int pipe);
This patch makes dummy changes in the audio drivers (thanks Libin) for
build to succeed. The audio side drivers will send the right 'pipe' values
for MST in patches that will follow.
v2:
Renamed the new API parameter from 'dev_id' to 'pipe'. (Jim, Ville)
Included Asoc driver API compatibility changes from Jeeja.
Added WARN_ON() for invalid pipe in get_saved_encoder(). (Takashi)
Added comment for av_enc_map[] definition. (Takashi)
v3:
Fixed logic error introduced while renaming 'dev_id' as 'pipe' (Ville)
Renamed get_saved_encoder() to get_saved_enc() to reduce line length
v4:
Rebased.
Parameter check for pipe < -1 values in get_saved_enc() (Ville)
Switched to for_each_pipe() in get_saved_enc() (Ville)
Renamed 'pipe' to 'dev_id' in audio side code (Takashi)
v5:
Included a comment for the dev_id arg. (Libin)
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474488168-2343-1-git-send-email-dhinakaran.pandiyan@intel.com
/* perform PHY state sanity checks? */
bool chv_phy_assert[2];
- struct intel_encoder *dig_port_map[I915_MAX_PORTS];
+ /* Used to save the pipe-to-encoder mapping for audio */
+ struct intel_encoder *av_enc_map[I915_MAX_PIPES];
/*
* NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
struct i915_audio_component *acomp = dev_priv->audio_component;
enum port port = intel_encoder->port;
+ enum pipe pipe = crtc->pipe;
connector = drm_select_eld(encoder);
if (!connector)
mutex_lock(&dev_priv->av_mutex);
intel_encoder->audio_connector = connector;
+
/* referred in audio callbacks */
- dev_priv->dig_port_map[port] = intel_encoder;
+ dev_priv->av_enc_map[pipe] = intel_encoder;
mutex_unlock(&dev_priv->av_mutex);
+ /* audio drivers expect pipe = -1 to indicate Non-MST cases */
+ if (intel_encoder->type != INTEL_OUTPUT_DP_MST)
+ pipe = -1;
+
if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify)
- acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port);
+ acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr,
+ (int) port, (int) pipe);
}
/**
struct drm_i915_private *dev_priv = to_i915(encoder->dev);
struct i915_audio_component *acomp = dev_priv->audio_component;
enum port port = intel_encoder->port;
+ struct intel_crtc *crtc = to_intel_crtc(encoder->crtc);
+ enum pipe pipe = crtc->pipe;
if (dev_priv->display.audio_codec_disable)
dev_priv->display.audio_codec_disable(intel_encoder);
mutex_lock(&dev_priv->av_mutex);
intel_encoder->audio_connector = NULL;
- dev_priv->dig_port_map[port] = NULL;
+ dev_priv->av_enc_map[pipe] = NULL;
mutex_unlock(&dev_priv->av_mutex);
+ /* audio drivers expect pipe = -1 to indicate Non-MST cases */
+ if (intel_encoder->type != INTEL_OUTPUT_DP_MST)
+ pipe = -1;
+
if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify)
- acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port);
+ acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr,
+ (int) port, (int) pipe);
}
/**
return dev_priv->cdclk_freq;
}
-static int i915_audio_component_sync_audio_rate(struct device *kdev,
- int port, int rate)
+static struct intel_encoder *get_saved_enc(struct drm_i915_private *dev_priv,
+ int port, int pipe)
+{
+
+ if (WARN_ON(pipe >= I915_MAX_PIPES))
+ return NULL;
+
+ /* MST */
+ if (pipe >= 0)
+ return dev_priv->av_enc_map[pipe];
+
+ /* Non-MST */
+ for_each_pipe(dev_priv, pipe) {
+ struct intel_encoder *encoder;
+
+ encoder = dev_priv->av_enc_map[pipe];
+ if (encoder == NULL)
+ continue;
+
+ if (port == encoder->port)
+ return encoder;
+ }
+
+ return NULL;
+}
+
+static int i915_audio_component_sync_audio_rate(struct device *kdev, int port,
+ int pipe, int rate)
{
struct drm_i915_private *dev_priv = kdev_to_i915(kdev);
struct intel_encoder *intel_encoder;
struct intel_crtc *crtc;
struct drm_display_mode *mode;
struct i915_audio_component *acomp = dev_priv->audio_component;
- enum pipe pipe = INVALID_PIPE;
u32 tmp;
int n;
int err = 0;
i915_audio_component_get_power(kdev);
mutex_lock(&dev_priv->av_mutex);
+
/* 1. get the pipe */
- intel_encoder = dev_priv->dig_port_map[port];
- /* intel_encoder might be NULL for DP MST */
+ intel_encoder = get_saved_enc(dev_priv, port, pipe);
if (!intel_encoder || !intel_encoder->base.crtc ||
intel_encoder->type != INTEL_OUTPUT_HDMI) {
- DRM_DEBUG_KMS("no valid port %c\n", port_name(port));
+ DRM_DEBUG_KMS("Not valid for port %c\n", port_name(port));
err = -ENODEV;
goto unlock;
}
+
+ /* pipe passed from the audio driver will be -1 for Non-MST case */
crtc = to_intel_crtc(intel_encoder->base.crtc);
pipe = crtc->pipe;
- if (pipe == INVALID_PIPE) {
- DRM_DEBUG_KMS("no pipe for the port %c\n", port_name(port));
- err = -ENODEV;
- goto unlock;
- }
- DRM_DEBUG_KMS("pipe %c connects port %c\n",
- pipe_name(pipe), port_name(port));
mode = &crtc->config->base.adjusted_mode;
/* port must be valid now, otherwise the pipe will be invalid */
}
static int i915_audio_component_get_eld(struct device *kdev, int port,
- bool *enabled,
+ int pipe, bool *enabled,
unsigned char *buf, int max_bytes)
{
struct drm_i915_private *dev_priv = kdev_to_i915(kdev);
int ret = -EINVAL;
mutex_lock(&dev_priv->av_mutex);
- intel_encoder = dev_priv->dig_port_map[port];
- /* intel_encoder might be NULL for DP MST */
- if (intel_encoder) {
- ret = 0;
- *enabled = intel_encoder->audio_connector != NULL;
- if (*enabled) {
- eld = intel_encoder->audio_connector->eld;
- ret = drm_eld_size(eld);
- memcpy(buf, eld, min(max_bytes, ret));
- }
+
+ intel_encoder = get_saved_enc(dev_priv, port, pipe);
+ if (!intel_encoder) {
+ DRM_DEBUG_KMS("Not valid for port %c\n", port_name(port));
+ mutex_unlock(&dev_priv->av_mutex);
+ return ret;
+ }
+
+ ret = 0;
+ *enabled = intel_encoder->audio_connector != NULL;
+ if (*enabled) {
+ eld = intel_encoder->audio_connector->eld;
+ ret = drm_eld_size(eld);
+ memcpy(buf, eld, min(max_bytes, ret));
}
mutex_unlock(&dev_priv->av_mutex);
* Called from audio driver. After audio driver sets the
* sample rate, it will call this function to set n/cts
*/
- int (*sync_audio_rate)(struct device *, int port, int rate);
+ int (*sync_audio_rate)(struct device *, int port, int pipe, int rate);
/**
* @get_eld: fill the audio state and ELD bytes for the given port
*
* Note that the returned size may be over @max_bytes. Then it
* implies that only a part of ELD has been copied to the buffer.
*/
- int (*get_eld)(struct device *, int port, bool *enabled,
+ int (*get_eld)(struct device *, int port, int pipe, bool *enabled,
unsigned char *buf, int max_bytes);
};
* status accordingly (even when the HDA controller is in power save
* mode).
*/
- void (*pin_eld_notify)(void *audio_ptr, int port);
+ void (*pin_eld_notify)(void *audio_ptr, int port, int pipe);
};
/**
int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable);
int snd_hdac_display_power(struct hdac_bus *bus, bool enable);
void snd_hdac_i915_set_bclk(struct hdac_bus *bus);
-int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid, int rate);
-int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
+int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid,
+ int dev_id, int rate);
+int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, int dev_id,
bool *audio_enabled, char *buffer, int max_bytes);
int snd_hdac_i915_init(struct hdac_bus *bus);
int snd_hdac_i915_exit(struct hdac_bus *bus);
{
}
static inline int snd_hdac_sync_audio_rate(struct hdac_device *codec,
- hda_nid_t nid, int rate)
+ hda_nid_t nid, int dev_id, int rate)
{
return 0;
}
static inline int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
- bool *audio_enabled, char *buffer,
- int max_bytes)
+ int dev_id, bool *audio_enabled,
+ char *buffer, int max_bytes)
{
return -ENODEV;
}
* snd_hdac_sync_audio_rate - Set N/CTS based on the sample rate
* @codec: HDA codec
* @nid: the pin widget NID
+ * @dev_id: device identifier
* @rate: the sample rate to set
*
* This function is supposed to be used only by a HD-audio controller
* This function sets N/CTS value based on the given sample rate.
* Returns zero for success, or a negative error code.
*/
-int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid, int rate)
+int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid,
+ int dev_id, int rate)
{
struct hdac_bus *bus = codec->bus;
struct i915_audio_component *acomp = bus->audio_component;
- int port;
+ int port, pipe;
if (!acomp || !acomp->ops || !acomp->ops->sync_audio_rate)
return -ENODEV;
port = pin2port(codec, nid);
if (port < 0)
return -EINVAL;
- return acomp->ops->sync_audio_rate(acomp->dev, port, rate);
+ pipe = dev_id;
+ return acomp->ops->sync_audio_rate(acomp->dev, port, pipe, rate);
}
EXPORT_SYMBOL_GPL(snd_hdac_sync_audio_rate);
* snd_hdac_acomp_get_eld - Get the audio state and ELD via component
* @codec: HDA codec
* @nid: the pin widget NID
+ * @dev_id: device identifier
* @audio_enabled: the pointer to store the current audio state
* @buffer: the buffer pointer to store ELD bytes
* @max_bytes: the max bytes to be stored on @buffer
* thus it may be over @max_bytes. If it's over @max_bytes, it implies
* that only a part of ELD bytes have been fetched.
*/
-int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
+int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, int dev_id,
bool *audio_enabled, char *buffer, int max_bytes)
{
struct hdac_bus *bus = codec->bus;
struct i915_audio_component *acomp = bus->audio_component;
- int port;
+ int port, pipe;
if (!acomp || !acomp->ops || !acomp->ops->get_eld)
return -ENODEV;
port = pin2port(codec, nid);
if (port < 0)
return -EINVAL;
- return acomp->ops->get_eld(acomp->dev, port, audio_enabled,
+
+ pipe = dev_id;
+ return acomp->ops->get_eld(acomp->dev, port, pipe, audio_enabled,
buffer, max_bytes);
}
EXPORT_SYMBOL_GPL(snd_hdac_acomp_get_eld);
mutex_lock(&per_pin->lock);
eld->monitor_present = false;
- size = snd_hdac_acomp_get_eld(&codec->core, per_pin->pin_nid,
+ size = snd_hdac_acomp_get_eld(&codec->core, per_pin->pin_nid, -1,
&eld->monitor_present, eld->eld_buffer,
ELD_MAX_SIZE);
if (size > 0) {
/* Call sync_audio_rate to set the N/CTS/M manually if necessary */
/* Todo: add DP1.2 MST audio support later */
if (codec_has_acomp(codec))
- snd_hdac_sync_audio_rate(&codec->core, pin_nid, runtime->rate);
+ snd_hdac_sync_audio_rate(&codec->core, pin_nid, -1,
+ runtime->rate);
non_pcm = check_non_pcm_per_cvt(codec, cvt_nid);
mutex_lock(&per_pin->lock);
snd_hda_codec_set_power_to_all(codec, fg, power_state);
}
-static void intel_pin_eld_notify(void *audio_ptr, int port)
+static void intel_pin_eld_notify(void *audio_ptr, int port, int pipe)
{
struct hda_codec *codec = audio_ptr;
int pin_nid;
return hdac_hdmi_init_dai_map(edev);
}
-static void hdac_hdmi_eld_notify_cb(void *aptr, int port)
+static void hdac_hdmi_eld_notify_cb(void *aptr, int port, int pipe)
{
struct hdac_ext_device *edev = aptr;
struct hdac_hdmi_priv *hdmi = edev->private_data;
projects / linux-beck.git / commitdiff