]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
cfg80211/mac80211: Update set_tx_power to use mBm instead of dBm units
authorJuuso Oikarinen <juuso.oikarinen@nokia.com>
Wed, 23 Jun 2010 09:12:37 +0000 (12:12 +0300)
committerJohn W. Linville <linville@tuxdriver.com>
Thu, 24 Jun 2010 19:42:33 +0000 (15:42 -0400)
In preparation for a TX power setting interface in the nl80211, change the
.set_tx_power function to use mBm units instead of dBm for greater accuracy and
smaller power levels.

Also, already in advance move the tx_power_setting enumeration to nl80211.

This change affects the .tx_set_power function prototype. As a result, the
corresponding changes are needed to modules using it. These are mac80211,
iwmc3200wifi and rndis_wlan.

Cc: Samuel Ortiz <samuel.ortiz@intel.com>
Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Acked-by: Samuel Ortiz <samuel.ortiz@intel.com>
Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/iwmc3200wifi/cfg80211.c
drivers/net/wireless/rndis_wlan.c
include/linux/nl80211.h
include/net/cfg80211.h
net/mac80211/cfg.c
net/wireless/wext-compat.c

index 902e95f70f6e7695445d2a3d23d04316bccea1a8..60619678f4ec1cb39c94dd5b97c3977082c168f3 100644 (file)
@@ -670,20 +670,24 @@ static int iwm_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev,
 }
 
 static int iwm_cfg80211_set_txpower(struct wiphy *wiphy,
-                                   enum tx_power_setting type, int dbm)
+                                   enum nl80211_tx_power_setting type, int mbm)
 {
        struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
        int ret;
 
        switch (type) {
-       case TX_POWER_AUTOMATIC:
+       case NL80211_TX_POWER_AUTOMATIC:
                return 0;
-       case TX_POWER_FIXED:
+       case NL80211_TX_POWER_FIXED:
+               if (mbm < 0 || (mbm % 100))
+                       return -EOPNOTSUPP;
+
                if (!test_bit(IWM_STATUS_READY, &iwm->status))
                        return 0;
 
                ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
-                                             CFG_TX_PWR_LIMIT_USR, dbm * 2);
+                                             CFG_TX_PWR_LIMIT_USR,
+                                             MBM_TO_DBM(mbm) * 2);
                if (ret < 0)
                        return ret;
 
index 4102cca54882b3ce033dfdc3c8c7c627363352f5..5e26edb57d822c45145f62fbf1cecb4e04134db8 100644 (file)
@@ -520,8 +520,9 @@ static int rndis_scan(struct wiphy *wiphy, struct net_device *dev,
 
 static int rndis_set_wiphy_params(struct wiphy *wiphy, u32 changed);
 
-static int rndis_set_tx_power(struct wiphy *wiphy, enum tx_power_setting type,
-                               int dbm);
+static int rndis_set_tx_power(struct wiphy *wiphy,
+                             enum nl80211_tx_power_setting type,
+                             int mbm);
 static int rndis_get_tx_power(struct wiphy *wiphy, int *dbm);
 
 static int rndis_connect(struct wiphy *wiphy, struct net_device *dev,
@@ -1856,20 +1857,25 @@ static int rndis_set_wiphy_params(struct wiphy *wiphy, u32 changed)
        return 0;
 }
 
-static int rndis_set_tx_power(struct wiphy *wiphy, enum tx_power_setting type,
-                               int dbm)
+static int rndis_set_tx_power(struct wiphy *wiphy,
+                             enum nl80211_tx_power_setting type,
+                             int mbm)
 {
        struct rndis_wlan_private *priv = wiphy_priv(wiphy);
        struct usbnet *usbdev = priv->usbdev;
 
-       netdev_dbg(usbdev->net, "%s(): type:0x%x dbm:%i\n",
-                  __func__, type, dbm);
+       netdev_dbg(usbdev->net, "%s(): type:0x%x mbm:%i\n",
+                  __func__, type, mbm);
+
+       if (mbm < 0 || (mbm % 100))
+               return -ENOTSUPP;
 
        /* Device doesn't support changing txpower after initialization, only
         * turn off/on radio. Support 'auto' mode and setting same dBm that is
         * currently used.
         */
-       if (type == TX_POWER_AUTOMATIC || dbm == get_bcm4320_power_dbm(priv)) {
+       if (type == NL80211_TX_POWER_AUTOMATIC ||
+           MBM_TO_DBM(mbm) == get_bcm4320_power_dbm(priv)) {
                if (!priv->radio_on)
                        disassociate(usbdev, true); /* turn on radio */
 
index 64fb32b93a28d4dd667587fa64a467b4d61b1c11..07aa04693f94dfc645202b41169f1f12565dc61b 100644 (file)
@@ -1659,4 +1659,17 @@ enum nl80211_cqm_rssi_threshold_event {
        NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
 };
 
+
+/**
+ * enum nl80211_tx_power_setting - TX power adjustment
+ * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
+ * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
+ * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
+ */
+enum nl80211_tx_power_setting {
+       NL80211_TX_POWER_AUTOMATIC,
+       NL80211_TX_POWER_LIMITED,
+       NL80211_TX_POWER_FIXED,
+};
+
 #endif /* __LINUX_NL80211_H */
index 64374f4cb7c6ff4d7757a35845d83b002f041d73..9b8b3f486ec81bedb2880baeee9c12140cfd3688 100644 (file)
@@ -875,19 +875,6 @@ enum wiphy_params_flags {
        WIPHY_PARAM_COVERAGE_CLASS      = 1 << 4,
 };
 
-/**
- * enum tx_power_setting - TX power adjustment
- *
- * @TX_POWER_AUTOMATIC: the dbm parameter is ignored
- * @TX_POWER_LIMITED: limit TX power by the dbm parameter
- * @TX_POWER_FIXED: fix TX power to the dbm parameter
- */
-enum tx_power_setting {
-       TX_POWER_AUTOMATIC,
-       TX_POWER_LIMITED,
-       TX_POWER_FIXED,
-};
-
 /*
  * cfg80211_bitrate_mask - masks for bitrate control
  */
@@ -1149,7 +1136,7 @@ struct cfg80211_ops {
        int     (*set_wiphy_params)(struct wiphy *wiphy, u32 changed);
 
        int     (*set_tx_power)(struct wiphy *wiphy,
-                               enum tx_power_setting type, int dbm);
+                               enum nl80211_tx_power_setting type, int mbm);
        int     (*get_tx_power)(struct wiphy *wiphy, int *dbm);
 
        int     (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev,
index 003b6addf5facbdc0ae0f314170d562b046b2058..f4efbfa4f237e4fea71d00eb95b220c4dbb823d6 100644 (file)
@@ -1329,28 +1329,28 @@ static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
 }
 
 static int ieee80211_set_tx_power(struct wiphy *wiphy,
-                                 enum tx_power_setting type, int dbm)
+                                 enum nl80211_tx_power_setting type, int mbm)
 {
        struct ieee80211_local *local = wiphy_priv(wiphy);
        struct ieee80211_channel *chan = local->hw.conf.channel;
        u32 changes = 0;
 
        switch (type) {
-       case TX_POWER_AUTOMATIC:
+       case NL80211_TX_POWER_AUTOMATIC:
                local->user_power_level = -1;
                break;
-       case TX_POWER_LIMITED:
-               if (dbm < 0)
-                       return -EINVAL;
-               local->user_power_level = dbm;
+       case NL80211_TX_POWER_LIMITED:
+               if (mbm < 0 || (mbm % 100))
+                       return -EOPNOTSUPP;
+               local->user_power_level = MBM_TO_DBM(mbm);
                break;
-       case TX_POWER_FIXED:
-               if (dbm < 0)
-                       return -EINVAL;
+       case NL80211_TX_POWER_FIXED:
+               if (mbm < 0 || (mbm % 100))
+                       return -EOPNOTSUPP;
                /* TODO: move to cfg80211 when it knows the channel */
-               if (dbm > chan->max_power)
+               if (MBM_TO_DBM(mbm) > chan->max_power)
                        return -EINVAL;
-               local->user_power_level = dbm;
+               local->user_power_level = MBM_TO_DBM(mbm);
                break;
        }
 
index 96342993cf933237d76c33595497d938ed86ec3c..1ff1e9f491369b2a8a460192b14d6485633051a6 100644 (file)
@@ -829,7 +829,7 @@ int cfg80211_wext_siwtxpower(struct net_device *dev,
 {
        struct wireless_dev *wdev = dev->ieee80211_ptr;
        struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
-       enum tx_power_setting type;
+       enum nl80211_tx_power_setting type;
        int dbm = 0;
 
        if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
@@ -852,7 +852,7 @@ int cfg80211_wext_siwtxpower(struct net_device *dev,
                        if (data->txpower.value < 0)
                                return -EINVAL;
                        dbm = data->txpower.value;
-                       type = TX_POWER_FIXED;
+                       type = NL80211_TX_POWER_FIXED;
                        /* TODO: do regulatory check! */
                } else {
                        /*
@@ -860,10 +860,10 @@ int cfg80211_wext_siwtxpower(struct net_device *dev,
                         * passed in from userland.
                         */
                        if (data->txpower.value < 0) {
-                               type = TX_POWER_AUTOMATIC;
+                               type = NL80211_TX_POWER_AUTOMATIC;
                        } else {
                                dbm = data->txpower.value;
-                               type = TX_POWER_LIMITED;
+                               type = NL80211_TX_POWER_LIMITED;
                        }
                }
        } else {
@@ -872,7 +872,7 @@ int cfg80211_wext_siwtxpower(struct net_device *dev,
                return 0;
        }
 
-       return rdev->ops->set_tx_power(wdev->wiphy, type, dbm);
+       return rdev->ops->set_tx_power(wdev->wiphy, type, DBM_TO_MBM(dbm));
 }
 EXPORT_SYMBOL_GPL(cfg80211_wext_siwtxpower);