staging: comedi: icp_multi: remove n_aochan from boardinfo

There is only one board type supported by this driver and the
number of analog output channels is constant. Remove the
boardinfo for it and just open-code the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c
index 7ad58e38885086e44c72b7c3cc70f99bcad4221f..a4c6af98641114a10c95019e3168375af615bedc 100644 (file)
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -132,7 +132,6 @@ struct boardtype {
        char cardtype;          /*  0=ICP Multi */
        int n_aichan;           /*  num of A/D chans */
        int n_aichand;          /*  num of A/D chans in diff mode */
-       int n_aochan;           /*  num of D/A chans */
        int ai_maxdata;         /*  resolution of A/D */
        int ao_maxdata;         /*  resolution of D/A */
        const struct comedi_lrange *rangelist_ai;       /*  rangelist for A/D */
@@ -685,28 +684,28 @@ static int icp_multi_reset(struct comedi_device *dev)
        writew(0, devpriv->io_addr + ICP_MULTI_INT_EN);
        writew(0x00ff, devpriv->io_addr + ICP_MULTI_INT_STAT);
 
-       if (this_board->n_aochan)
-               /*  Set DACs to 0..5V range and 0V output */
-               for (i = 0; i < this_board->n_aochan; i++) {
-                       devpriv->DacCmdStatus &= 0xfcce;
+       /* Set DACs to 0..5V range and 0V output */
+       for (i = 0; i < 4; i++) {
+               devpriv->DacCmdStatus &= 0xfcce;
 
-                       /*  Set channel number */
-                       devpriv->DacCmdStatus |= (i << 8);
+               /*  Set channel number */
+               devpriv->DacCmdStatus |= (i << 8);
 
-                       /*  Output 0V */
-                       writew(0, devpriv->io_addr + ICP_MULTI_AO);
+               /*  Output 0V */
+               writew(0, devpriv->io_addr + ICP_MULTI_AO);
 
-                       /*  Set start conversion bit */
-                       devpriv->DacCmdStatus |= DAC_ST;
+               /*  Set start conversion bit */
+               devpriv->DacCmdStatus |= DAC_ST;
 
-                       /*  Output to command / status register */
-                       writew(devpriv->DacCmdStatus,
-                              devpriv->io_addr + ICP_MULTI_DAC_CSR);
+               /*  Output to command / status register */
+               writew(devpriv->DacCmdStatus,
+                       devpriv->io_addr + ICP_MULTI_DAC_CSR);
 
-                       /*  Delay to allow DAC time to recover */
-                       udelay(1);
-               }
-       /*  Digital outputs to 0 */
+               /*  Delay to allow DAC time to recover */
+               udelay(1);
+       }
+
+       /* Digital outputs to 0 */
        writew(0, devpriv->io_addr + ICP_MULTI_DO);
 
        return 0;
@@ -772,8 +771,7 @@ static int icp_multi_attach(struct comedi_device *dev,
        n_subdevices = 0;
        if (this_board->n_aichan)
                n_subdevices++;
-       if (this_board->n_aochan)
-               n_subdevices++;
+       n_subdevices++;
        n_subdevices++;
        n_subdevices++;
        n_subdevices++;
@@ -820,18 +818,16 @@ static int icp_multi_attach(struct comedi_device *dev,
                subdev++;
        }
 
-       if (this_board->n_aochan) {
-               s = &dev->subdevices[subdev];
-               s->type = COMEDI_SUBD_AO;
-               s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
-               s->n_chan = this_board->n_aochan;
-               s->maxdata = this_board->ao_maxdata;
-               s->len_chanlist = this_board->n_aochan;
-               s->range_table = &range_analog;
-               s->insn_write = icp_multi_insn_write_ao;
-               s->insn_read = icp_multi_insn_read_ao;
-               subdev++;
-       }
+       s = &dev->subdevices[subdev];
+       s->type = COMEDI_SUBD_AO;
+       s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_COMMON;
+       s->n_chan = 4;
+       s->maxdata = this_board->ao_maxdata;
+       s->len_chanlist = 4;
+       s->range_table = &range_analog;
+       s->insn_write = icp_multi_insn_write_ao;
+       s->insn_read = icp_multi_insn_read_ao;
+       subdev++;
 
        s = &dev->subdevices[subdev];
        s->type = COMEDI_SUBD_DI;
@@ -896,7 +892,6 @@ static const struct boardtype boardtypes[] = {
                .cardtype       = TYPE_ICP_MULTI,
                .n_aichan       = 16,
                .n_aichand      = 8,
-               .n_aochan       = 4,
                .ai_maxdata     = 0x0fff,
                .ao_maxdata     = 0x0fff,
                .rangelist_ai   = &range_analog,