loff_t avail = file_inode(file)->i_size;
unsigned int mem = (uintptr_t)file->private_data & 3;
struct adapter *adap = file->private_data - mem;
+ __be32 *data;
+ int ret;
if (pos < 0)
return -EINVAL;
if (count > avail - pos)
count = avail - pos;
- while (count) {
- size_t len;
- int ret, ofst;
- __be32 data[16];
+ data = t4_alloc_mem(count);
+ if (!data)
+ return -ENOMEM;
- if ((mem == MEM_MC) || (mem == MEM_MC1))
- ret = t4_mc_read(adap, mem % MEM_MC, pos, data, NULL);
- else
- ret = t4_edc_read(adap, mem, pos, data, NULL);
- if (ret)
- return ret;
+ spin_lock(&adap->win0_lock);
+ ret = t4_memory_rw(adap, 0, mem, pos, count, data, T4_MEMORY_READ);
+ spin_unlock(&adap->win0_lock);
+ if (ret) {
+ t4_free_mem(data);
+ return ret;
+ }
+ ret = copy_to_user(buf, data, count);
- ofst = pos % sizeof(data);
- len = min(count, sizeof(data) - ofst);
- if (copy_to_user(buf, (u8 *)data + ofst, len))
- return -EFAULT;
+ t4_free_mem(data);
+ if (ret)
+ return -EFAULT;
- buf += len;
- pos += len;
- count -= len;
- }
- count = pos - *ppos;
- *ppos = pos;
+ *ppos = pos + count;
return count;
}
__be64 indices;
int ret;
- ret = t4_mem_win_read_len(adap, addr, (__be32 *)&indices, 8);
+ spin_lock(&adap->win0_lock);
+ ret = t4_memory_rw(adap, 0, MEM_EDC0, addr,
+ sizeof(indices), (__be32 *)&indices,
+ T4_MEMORY_READ);
+ spin_unlock(&adap->win0_lock);
if (!ret) {
*cidx = (be64_to_cpu(indices) >> 25) & 0xffff;
*pidx = (be64_to_cpu(indices) >> 9) & 0xffff;
adapter->fn, 0, 1, params, val);
if (ret == 0) {
/*
- * For t4_memory_write() below addresses and
+ * For t4_memory_rw() below addresses and
* sizes have to be in terms of multiples of 4
* bytes. So, if the Configuration File isn't
* a multiple of 4 bytes in length we'll have
mtype = FW_PARAMS_PARAM_Y_GET(val[0]);
maddr = FW_PARAMS_PARAM_Z_GET(val[0]) << 16;
- ret = t4_memory_write(adapter, mtype, maddr,
- size, data);
+ spin_lock(&adapter->win0_lock);
+ ret = t4_memory_rw(adapter, 0, mtype, maddr,
+ size, data, T4_MEMORY_WRITE);
if (ret == 0 && resid != 0) {
union {
__be32 word;
last.word = data[size >> 2];
for (i = resid; i < 4; i++)
last.buf[i] = 0;
- ret = t4_memory_write(adapter, mtype,
- maddr + size,
- 4, &last.word);
+ ret = t4_memory_rw(adapter, 0, mtype,
+ maddr + size,
+ 4, &last.word,
+ T4_MEMORY_WRITE);
}
+ spin_unlock(&adapter->win0_lock);
}
}
return 0;
}
-/*
- * t4_mem_win_rw - read/write memory through PCIE memory window
- * @adap: the adapter
- * @addr: address of first byte requested
- * @data: MEMWIN0_APERTURE bytes of data containing the requested address
- * @dir: direction of transfer 1 => read, 0 => write
- *
- * Read/write MEMWIN0_APERTURE bytes of data from MC starting at a
- * MEMWIN0_APERTURE-byte-aligned address that covers the requested
- * address @addr.
- */
-static int t4_mem_win_rw(struct adapter *adap, u32 addr, __be32 *data, int dir)
-{
- int i;
- u32 win_pf = is_t4(adap->params.chip) ? 0 : V_PFNUM(adap->fn);
-
- /*
- * Setup offset into PCIE memory window. Address must be a
- * MEMWIN0_APERTURE-byte-aligned address. (Read back MA register to
- * ensure that changes propagate before we attempt to use the new
- * values.)
- */
- t4_write_reg(adap, PCIE_MEM_ACCESS_OFFSET,
- (addr & ~(MEMWIN0_APERTURE - 1)) | win_pf);
- t4_read_reg(adap, PCIE_MEM_ACCESS_OFFSET);
-
- /* Collecting data 4 bytes at a time upto MEMWIN0_APERTURE */
- for (i = 0; i < MEMWIN0_APERTURE; i = i+0x4) {
- if (dir)
- *data++ = (__force __be32) t4_read_reg(adap,
- (MEMWIN0_BASE + i));
- else
- t4_write_reg(adap, (MEMWIN0_BASE + i),
- (__force u32) *data++);
- }
-
- return 0;
-}
-
/**
* t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window
* @adap: the adapter
+ * @win: PCI-E Memory Window to use
* @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC
* @addr: address within indicated memory type
* @len: amount of memory to transfer
* @buf: host memory buffer
- * @dir: direction of transfer 1 => read, 0 => write
+ * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
*
* Reads/writes an [almost] arbitrary memory region in the firmware: the
- * firmware memory address, length and host buffer must be aligned on
- * 32-bit boudaries. The memory is transferred as a raw byte sequence
- * from/to the firmware's memory. If this memory contains data
- * structures which contain multi-byte integers, it's the callers
- * responsibility to perform appropriate byte order conversions.
+ * firmware memory address and host buffer must be aligned on 32-bit
+ * boudaries; the length may be arbitrary. The memory is transferred as
+ * a raw byte sequence from/to the firmware's memory. If this memory
+ * contains data structures which contain multi-byte integers, it's the
+ * caller's responsibility to perform appropriate byte order conversions.
*/
-static int t4_memory_rw(struct adapter *adap, int mtype, u32 addr, u32 len,
- __be32 *buf, int dir)
+int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr,
+ u32 len, __be32 *buf, int dir)
{
- u32 pos, start, end, offset, memoffset;
- u32 edc_size, mc_size;
- int ret = 0;
- __be32 *data;
+ u32 pos, offset, resid, memoffset;
+ u32 edc_size, mc_size, win_pf, mem_reg, mem_aperture, mem_base;
- /*
- * Argument sanity checks ...
+ /* Argument sanity checks ...
*/
- if ((addr & 0x3) || (len & 0x3))
+ if (addr & 0x3)
return -EINVAL;
- data = vmalloc(MEMWIN0_APERTURE);
- if (!data)
- return -ENOMEM;
+ /* It's convenient to be able to handle lengths which aren't a
+ * multiple of 32-bits because we often end up transferring files to
+ * the firmware. So we'll handle that by normalizing the length here
+ * and then handling any residual transfer at the end.
+ */
+ resid = len & 0x3;
+ len -= resid;
/* Offset into the region of memory which is being accessed
* MEM_EDC0 = 0
/* Determine the PCIE_MEM_ACCESS_OFFSET */
addr = addr + memoffset;
- /*
- * The underlaying EDC/MC read routines read MEMWIN0_APERTURE bytes
- * at a time so we need to round down the start and round up the end.
- * We'll start copying out of the first line at (addr - start) a word
- * at a time.
+ /* Each PCI-E Memory Window is programmed with a window size -- or
+ * "aperture" -- which controls the granularity of its mapping onto
+ * adapter memory. We need to grab that aperture in order to know
+ * how to use the specified window. The window is also programmed
+ * with the base address of the Memory Window in BAR0's address
+ * space. For T4 this is an absolute PCI-E Bus Address. For T5
+ * the address is relative to BAR0.
*/
- start = addr & ~(MEMWIN0_APERTURE-1);
- end = (addr + len + MEMWIN0_APERTURE-1) & ~(MEMWIN0_APERTURE-1);
- offset = (addr - start)/sizeof(__be32);
+ mem_reg = t4_read_reg(adap,
+ PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN,
+ win));
+ mem_aperture = 1 << (GET_WINDOW(mem_reg) + 10);
+ mem_base = GET_PCIEOFST(mem_reg) << 10;
+ if (is_t4(adap->params.chip))
+ mem_base -= adap->t4_bar0;
+ win_pf = is_t4(adap->params.chip) ? 0 : V_PFNUM(adap->fn);
- for (pos = start; pos < end; pos += MEMWIN0_APERTURE, offset = 0) {
+ /* Calculate our initial PCI-E Memory Window Position and Offset into
+ * that Window.
+ */
+ pos = addr & ~(mem_aperture-1);
+ offset = addr - pos;
- /*
- * If we're writing, copy the data from the caller's memory
- * buffer
+ /* Set up initial PCI-E Memory Window to cover the start of our
+ * transfer. (Read it back to ensure that changes propagate before we
+ * attempt to use the new value.)
+ */
+ t4_write_reg(adap,
+ PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET, win),
+ pos | win_pf);
+ t4_read_reg(adap,
+ PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET, win));
+
+ /* Transfer data to/from the adapter as long as there's an integral
+ * number of 32-bit transfers to complete.
+ */
+ while (len > 0) {
+ if (dir == T4_MEMORY_READ)
+ *buf++ = (__force __be32) t4_read_reg(adap,
+ mem_base + offset);
+ else
+ t4_write_reg(adap, mem_base + offset,
+ (__force u32) *buf++);
+ offset += sizeof(__be32);
+ len -= sizeof(__be32);
+
+ /* If we've reached the end of our current window aperture,
+ * move the PCI-E Memory Window on to the next. Note that
+ * doing this here after "len" may be 0 allows us to set up
+ * the PCI-E Memory Window for a possible final residual
+ * transfer below ...
*/
- if (!dir) {
- /*
- * If we're doing a partial write, then we need to do
- * a read-modify-write ...
- */
- if (offset || len < MEMWIN0_APERTURE) {
- ret = t4_mem_win_rw(adap, pos, data, 1);
- if (ret)
- break;
- }
- while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) &&
- len > 0) {
- data[offset++] = *buf++;
- len -= sizeof(__be32);
- }
+ if (offset == mem_aperture) {
+ pos += mem_aperture;
+ offset = 0;
+ t4_write_reg(adap,
+ PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET,
+ win), pos | win_pf);
+ t4_read_reg(adap,
+ PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET,
+ win));
}
-
- /*
- * Transfer a block of memory and bail if there's an error.
- */
- ret = t4_mem_win_rw(adap, pos, data, dir);
- if (ret)
- break;
-
- /*
- * If we're reading, copy the data into the caller's memory
- * buffer.
- */
- if (dir)
- while (offset < (MEMWIN0_APERTURE/sizeof(__be32)) &&
- len > 0) {
- *buf++ = data[offset++];
- len -= sizeof(__be32);
- }
}
- vfree(data);
- return ret;
-}
+ /* If the original transfer had a length which wasn't a multiple of
+ * 32-bits, now's where we need to finish off the transfer of the
+ * residual amount. The PCI-E Memory Window has already been moved
+ * above (if necessary) to cover this final transfer.
+ */
+ if (resid) {
+ union {
+ __be32 word;
+ char byte[4];
+ } last;
+ unsigned char *bp;
+ int i;
+
+ if (dir == T4_MEMORY_WRITE) {
+ last.word = (__force __be32) t4_read_reg(adap,
+ mem_base + offset);
+ for (bp = (unsigned char *)buf, i = resid; i < 4; i++)
+ bp[i] = last.byte[i];
+ } else {
+ last.word = *buf;
+ for (i = resid; i < 4; i++)
+ last.byte[i] = 0;
+ t4_write_reg(adap, mem_base + offset,
+ (__force u32) last.word);
+ }
+ }
-int t4_memory_write(struct adapter *adap, int mtype, u32 addr, u32 len,
- __be32 *buf)
-{
- return t4_memory_rw(adap, mtype, addr, len, buf, 0);
+ return 0;
}
#define EEPROM_STAT_ADDR 0x7bfc
return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}
-/**
- * t4_mem_win_read_len - read memory through PCIE memory window
- * @adap: the adapter
- * @addr: address of first byte requested aligned on 32b.
- * @data: len bytes to hold the data read
- * @len: amount of data to read from window. Must be <=
- * MEMWIN0_APERATURE after adjusting for 16B for T4 and
- * 128B for T5 alignment requirements of the the memory window.
- *
- * Read len bytes of data from MC starting at @addr.
- */
-int t4_mem_win_read_len(struct adapter *adap, u32 addr, __be32 *data, int len)
-{
- int i, off;
- u32 win_pf = is_t4(adap->params.chip) ? 0 : V_PFNUM(adap->fn);
-
- /* Align on a 2KB boundary.
- */
- off = addr & MEMWIN0_APERTURE;
- if ((addr & 3) || (len + off) > MEMWIN0_APERTURE)
- return -EINVAL;
-
- t4_write_reg(adap, PCIE_MEM_ACCESS_OFFSET,
- (addr & ~MEMWIN0_APERTURE) | win_pf);
- t4_read_reg(adap, PCIE_MEM_ACCESS_OFFSET);
-
- for (i = 0; i < len; i += 4)
- *data++ = (__force __be32) t4_read_reg(adap,
- (MEMWIN0_BASE + off + i));
-
- return 0;
-}
-
/**
* t4_mdio_rd - read a PHY register through MDIO
* @adap: the adapter
projects / linux-beck.git / commitdiff