]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
spi: davinci: setup chip-select timers values only if timer enabled
authorBrian Niebuhr <bniebuhr@efjohnson.com>
Thu, 19 Aug 2010 07:14:31 +0000 (12:44 +0530)
committerSekhar Nori <nsekhar@ti.com>
Thu, 18 Nov 2010 13:08:26 +0000 (18:38 +0530)
Setup chip-select timers values only if timer is enabled
(timer_disbled in spi configuration is false).

As a nice side effect, this patch removes code duplicated in
davinci_spi_bufs_pio() and davinci_spi_bufs_dma().

Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com>
Tested-By: Michael Williamson <michael.williamson@criticallink.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
drivers/spi/davinci_spi.c

index 34b28fe2d3271160250a331956f6708cafb9aa75..d09b63cf58bf191d476e0eab06701268fe0589ea 100644 (file)
@@ -374,6 +374,10 @@ static int davinci_spi_setup_transfer(struct spi_device *spi,
 
                if (spicfg->timer_disable)
                        spifmt |= SPIFMT_DISTIMER_MASK;
+               else
+                       iowrite32((spicfg->c2tdelay << SPI_C2TDELAY_SHIFT) |
+                                 (spicfg->t2cdelay << SPI_T2CDELAY_SHIFT),
+                                 davinci_spi->base + SPIDELAY);
 
                if (spi->mode & SPI_READY)
                        spifmt |= SPIFMT_WAITENA_MASK;
@@ -607,13 +611,9 @@ static int davinci_spi_bufs_pio(struct spi_device *spi, struct spi_transfer *t)
        u32 tx_data, data1_reg_val;
        u32 buf_val, flg_val;
        struct davinci_spi_platform_data *pdata;
-       struct davinci_spi_config *spicfg;
 
        davinci_spi = spi_master_get_devdata(spi->master);
        pdata = davinci_spi->pdata;
-       spicfg = (struct davinci_spi_config *)spi->controller_data;
-       if (!spicfg)
-               spicfg = &davinci_spi_default_cfg;
 
        davinci_spi->tx = t->tx_buf;
        davinci_spi->rx = t->rx_buf;
@@ -633,10 +633,6 @@ static int davinci_spi_bufs_pio(struct spi_device *spi, struct spi_transfer *t)
        /* Enable SPI */
        set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
 
-       iowrite32((spicfg->c2tdelay << SPI_C2TDELAY_SHIFT) |
-                       (spicfg->t2cdelay << SPI_T2CDELAY_SHIFT),
-                       davinci_spi->base + SPIDELAY);
-
        count = davinci_spi->count;
 
        /* Determine the command to execute READ or WRITE */
@@ -741,14 +737,10 @@ static int davinci_spi_bufs_dma(struct spi_device *spi, struct spi_transfer *t)
        struct davinci_spi_dma *davinci_spi_dma;
        int word_len, data_type, ret;
        unsigned long tx_reg, rx_reg;
-       struct davinci_spi_config *spicfg;
        struct device *sdev;
 
        davinci_spi = spi_master_get_devdata(spi->master);
        sdev = davinci_spi->bitbang.master->dev.parent;
-       spicfg = (struct davinci_spi_config *)spi->controller_data;
-       if (!spicfg)
-               spicfg = &davinci_spi_default_cfg;
 
        davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
 
@@ -784,11 +776,6 @@ static int davinci_spi_bufs_dma(struct spi_device *spi, struct spi_transfer *t)
        if (ret)
                return ret;
 
-       /* Put delay val if required */
-       iowrite32((spicfg->c2tdelay << SPI_C2TDELAY_SHIFT) |
-                       (spicfg->t2cdelay << SPI_T2CDELAY_SHIFT),
-                       davinci_spi->base + SPIDELAY);
-
        count = davinci_spi->count;     /* the number of elements */
 
        /* disable all interrupts for dma transfers */