};
#endif
-/*
- * spinand_cmd - to process a command to send to the SPI Nand
+/**
+ * spinand_cmd - process a command to send to the SPI Nand
* Description:
* Set up the command buffer to send to the SPI controller.
* The command buffer has to initialized to 0.
return spi_sync(spi, &message);
}
-/*
- * spinand_read_id- Read SPI Nand ID
+/**
+ * spinand_read_id - Read SPI Nand ID
* Description:
- * Read ID: read two ID bytes from the SPI Nand device
+ * read two ID bytes from the SPI Nand device
*/
static int spinand_read_id(struct spi_device *spi_nand, u8 *id)
{
return retval;
}
-/*
- * spinand_read_status- send command 0xf to the SPI Nand status register
+/**
+ * spinand_read_status - send command 0xf to the SPI Nand status register
* Description:
* After read, write, or erase, the Nand device is expected to set the
* busy status.
}
/**
- * spinand_get_otp- send command 0xf to read the SPI Nand OTP register
+ * spinand_get_otp - send command 0xf to read the SPI Nand OTP register
* Description:
* There is one bit( bit 0x10 ) to set or to clear the internal ECC.
* Enable chip internal ECC, set the bit to 1
}
/**
- * spinand_set_otp- send command 0x1f to write the SPI Nand OTP register
+ * spinand_set_otp - send command 0x1f to write the SPI Nand OTP register
* Description:
* There is one bit( bit 0x10 ) to set or to clear the internal ECC.
* Enable chip internal ECC, set the bit to 1
#ifdef CONFIG_MTD_SPINAND_ONDIEECC
/**
- * spinand_enable_ecc- send command 0x1f to write the SPI Nand OTP register
+ * spinand_enable_ecc - send command 0x1f to write the SPI Nand OTP register
* Description:
* There is one bit( bit 0x10 ) to set or to clear the internal ECC.
* Enable chip internal ECC, set the bit to 1
}
/**
- * spinand_write_enable- send command 0x06 to enable write or erase the
+ * spinand_write_enable - send command 0x06 to enable write or erase the
* Nand cells
* Description:
* Before write and erase the Nand cells, the write enable has to be set.
return spinand_cmd(spi_nand, &cmd);
}
-/*
- * spinand_read_from_cache- send command 0x03 to read out the data from the
- * cache register(2112 bytes max)
+/**
+ * spinand_read_from_cache - send command 0x03 to read out the data from the
+ * cache register (2112 bytes max)
* Description:
* The read can specify 1 to 2112 bytes of data read at the corresponding
* locations.
return spinand_cmd(spi_nand, &cmd);
}
-/*
- * spinand_read_page-to read a page with:
+/**
+ * spinand_read_page - read a page
* @page_id: the physical page number
* @offset: the location from 0 to 2111
* @len: number of bytes to read
* @rbuf: read buffer to hold @len bytes
*
* Description:
- * The read includes two commands to the Nand: 0x13 and 0x03 commands
+ * The read includes two commands to the Nand - 0x13 and 0x03 commands
* Poll to read status to wait for tRD time.
*/
static int spinand_read_page(struct spi_device *spi_nand, u16 page_id,
return ret;
}
-/*
- * spinand_program_data_to_cache--to write a page to cache with:
+/**
+ * spinand_program_data_to_cache - write a page to cache
* @byte_id: the location to write to the cache
* @len: number of bytes to write
- * @rbuf: read buffer to hold @len bytes
+ * @wbuf: write buffer holding @len bytes
*
* Description:
* The write command used here is 0x84--indicating that the cache is
}
/**
- * spinand_program_execute--to write a page from cache to the Nand array with
+ * spinand_program_execute - write a page from cache to the Nand array
* @page_id: the physical page location to write the page.
*
* Description:
}
/**
- * spinand_program_page--to write a page with:
+ * spinand_program_page - write a page
* @page_id: the physical page location to write the page.
* @offset: the location from the cache starting from 0 to 2111
* @len: the number of bytes to write
- * @wbuf: the buffer to hold the number of bytes
+ * @buf: the buffer holding @len bytes
*
* Description:
* The commands used here are 0x06, 0x84, and 0x10--indicating that
}
/**
- * spinand_erase_block_erase--to erase a page with:
+ * spinand_erase_block_erase - erase a page
* @block_id: the physical block location to erase.
*
* Description:
}
/**
- * spinand_erase_block--to erase a page with:
+ * spinand_erase_block - erase a page
* @block_id: the physical block location to erase.
*
* Description:
}
/**
- * spinand_lock_block- send write register 0x1f command to the Nand device
+ * spinand_lock_block - send write register 0x1f command to the Nand device
*
* Description:
* After power up, all the Nand blocks are locked. This function allows
return ret;
}
-/*
+/**
* spinand_probe - [spinand Interface]
* @spi_nand: registered device driver.
*
* Description:
- * To set up the device driver parameters to make the device available.
+ * Set up the device driver parameters to make the device available.
*/
static int spinand_probe(struct spi_device *spi_nand)
{
return mtd_device_register(mtd, NULL, 0);
}
-/*
- * spinand_remove: Remove the device driver
+/**
+ * spinand_remove - remove the device driver
* @spi: the spi device.
*
* Description:
- * To remove the device driver parameters and free up allocated memories.
+ * Remove the device driver parameters and free up allocated memories.
*/
static int spinand_remove(struct spi_device *spi)
{
projects / linux-beck.git / commitdiff