]> git.karo-electronics.de Git - linux-beck.git/commitdiff
OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism
authorPaul Walmsley <paul@pwsan.com>
Tue, 21 Dec 2010 22:39:15 +0000 (15:39 -0700)
committerPaul Walmsley <paul@pwsan.com>
Wed, 22 Dec 2010 02:57:40 +0000 (19:57 -0700)
The OMAP watchdog timer IP blocks require a specific set of register
writes to occur before they will be disabled[1], even if the device
clocks appear to be disabled in the CM_*CLKEN registers.  In the MPU
watchdog case, failure to execute this reset sequence will eventually
cause the watchdog to reset the OMAP unexpectedly.

Previously, the code to disable this watchdog was manually called from
mach-omap2/devices.c during device initialization.  This causes the
watchdog to be unconditionally disabled for a portion of kernel
initialization.  This should be controllable by the board-*.c files,
since some system integrators will want full watchdog coverage of
kernel initialization.  Also, the watchdog disable code was not
connected to the hwmod shutdown code.  This means that calling
omap_hwmod_shutdown() will not, in fact, disable the watchdog, and the
goal of omap_hwmod_shutdown() is to be able to shutdown any on-chip
OMAP device.

To resolve the latter problem, populate the pre_shutdown pointer in
the watchdog timer hwmod classes with a function that executes the
watchdog shutdown sequence.  This allows the hwmod code to fully
disable the watchdog.

Then, to allow some board files to support watchdog coverage
throughout kernel initialization, add common code to mach-omap2/io.c
to cause the MPU watchdog to be disabled on boot unless a board file
specifically requests it to remain enabled.  Board files can do this
by changing the watchdog timer hwmod's postsetup state between the
omap2_init_common_infrastructure() and omap2_init_common_devices()
function calls.

1. OMAP34xx Multimedia Device Silicon Revision 3.1.x Rev. ZH
   [SWPU222H], Section 16.4.3.6, "Start/Stop Sequence for WDTs (Using
   WDTi.WSPR Register)"

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: BenoƮt Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Charulatha Varadarajan <charu@ti.com>
arch/arm/mach-omap2/devices.c
arch/arm/mach-omap2/io.c
arch/arm/mach-omap2/omap_hwmod_2420_data.c
arch/arm/mach-omap2/omap_hwmod_2430_data.c
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
arch/arm/mach-omap2/wd_timer.c

index 9221a486b51f7e2c7f438d234da2bb5873f505a3..381f4eb923520f125f48bf4420139b9c13a2e502 100644 (file)
@@ -33,7 +33,6 @@
 
 #include "mux.h"
 #include "control.h"
-#include "wd_timer.h"
 
 #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
 
@@ -956,26 +955,12 @@ static inline void omap_init_vout(void) {}
 
 /*-------------------------------------------------------------------------*/
 
-static int omap2_disable_wdt(struct omap_hwmod *oh, void *unused)
-{
-       return omap2_wd_timer_disable(oh);
-}
-
-static void __init omap_disable_wdt(void)
-{
-       if (cpu_class_is_omap2())
-               omap_hwmod_for_each_by_class("wd_timer",
-                                            omap2_disable_wdt, NULL);
-       return;
-}
-
 static int __init omap2_init_devices(void)
 {
        /*
         * please keep these calls, and their implementations above,
         * in alphabetical order so they're easier to sort through.
         */
-       omap_disable_wdt();
        omap_hsmmc_reset();
        omap_init_audio();
        omap_init_camera();
index 7362b69a154de95c5d4d36116630ee2d2720018e..d87e23a24dcdcfbc5703a6fc91b8e2d6068dba0c 100644 (file)
@@ -361,6 +361,24 @@ void __init omap2_init_common_infrastructure(void)
 #endif
        omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
 
+       /*
+        * Set the default postsetup state for unusual modules (like
+        * MPU WDT).
+        *
+        * The postsetup_state is not actually used until
+        * omap_hwmod_late_init(), so boards that desire full watchdog
+        * coverage of kernel initialization can reprogram the
+        * postsetup_state between the calls to
+        * omap2_init_common_infra() and omap2_init_common_devices().
+        *
+        * XXX ideally we could detect whether the MPU WDT was currently
+        * enabled here and make this conditional
+        */
+       postsetup_state = _HWMOD_STATE_DISABLED;
+       omap_hwmod_for_each_by_class("wd_timer",
+                                    _set_hwmod_postsetup_state,
+                                    &postsetup_state);
+
        omap_pm_if_early_init();
 
        if (cpu_is_omap2420())
index 42606f6b0cdf9209eb6246d30327e872708da683..b85c630b64d6eee4d321d99f20b7c42cbaea542e 100644 (file)
@@ -23,6 +23,7 @@
 
 #include "cm-regbits-24xx.h"
 #include "prm-regbits-24xx.h"
+#include "wd_timer.h"
 
 /*
  * OMAP2420 hardware module integration data
@@ -312,8 +313,9 @@ static struct omap_hwmod_class_sysconfig omap2420_wd_timer_sysc = {
 };
 
 static struct omap_hwmod_class omap2420_wd_timer_hwmod_class = {
-       .name = "wd_timer",
-       .sysc = &omap2420_wd_timer_sysc,
+       .name           = "wd_timer",
+       .sysc           = &omap2420_wd_timer_sysc,
+       .pre_shutdown   = &omap2_wd_timer_disable
 };
 
 /* wd_timer2 */
index 3315d241feef635887eb98d0e85b1ad2a811c582..3c2c724796a27e555ec72fb56d3efcd242fb3710 100644 (file)
@@ -23,6 +23,7 @@
 
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
+#include "wd_timer.h"
 
 /*
  * OMAP2430 hardware module integration data
@@ -311,8 +312,9 @@ static struct omap_hwmod_class_sysconfig omap2430_wd_timer_sysc = {
 };
 
 static struct omap_hwmod_class omap2430_wd_timer_hwmod_class = {
-       .name = "wd_timer",
-       .sysc = &omap2430_wd_timer_sysc,
+       .name           = "wd_timer",
+       .sysc           = &omap2430_wd_timer_sysc,
+       .pre_shutdown   = &omap2_wd_timer_disable
 };
 
 /* wd_timer2 */
index d5acb63ba9e0f1cc5bd2a93af16849e470adae44..89a943e9459c782c8126ab14b0737c6c522ecf5f 100644 (file)
@@ -26,6 +26,7 @@
 
 #include "prm-regbits-34xx.h"
 #include "cm-regbits-34xx.h"
+#include "wd_timer.h"
 
 /*
  * OMAP3xxx hardware module integration data
@@ -423,8 +424,9 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
 };
 
 static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = {
-       .name = "wd_timer",
-       .sysc = &omap3xxx_wd_timer_sysc,
+       .name           = "wd_timer",
+       .sysc           = &omap3xxx_wd_timer_sysc,
+       .pre_shutdown   = &omap2_wd_timer_disable
 };
 
 /* wd_timer2 */
index f9778fba8322fd61dba97cf65872a06b7667ed21..f136f7f2274cdd61f3d0522bdd186409bbe367f6 100644 (file)
@@ -29,6 +29,7 @@
 
 #include "cm.h"
 #include "prm-regbits-44xx.h"
+#include "wd_timer.h"
 
 /* Base offset for all OMAP4 interrupts external to MPUSS */
 #define OMAP44XX_IRQ_GIC_START 32
@@ -728,8 +729,9 @@ static struct omap_hwmod_class_sysconfig omap44xx_uart_sysc = {
 };
 
 static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = {
-       .name = "wd_timer",
-       .sysc = &omap44xx_wd_timer_sysc,
+       .name           = "wd_timer",
+       .sysc           = &omap44xx_wd_timer_sysc,
+       .pre_shutdown   = &omap2_wd_timer_disable
 };
 
 /* wd_timer2 */
index 06c256d38988ba99c633312722b98c1ee2a46591..b0c4907ab3caa216b8cdfd37a9f35f50ac2eab48 100644 (file)
@@ -27,7 +27,6 @@
 int omap2_wd_timer_disable(struct omap_hwmod *oh)
 {
        void __iomem *base;
-       int ret;
 
        if (!oh) {
                pr_err("%s: Could not look up wdtimer_hwmod\n", __func__);
@@ -41,14 +40,6 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh)
                return -EINVAL;
        }
 
-       /* Enable the clocks before accessing the WDT registers */
-       ret = omap_hwmod_enable(oh);
-       if (ret) {
-               pr_err("%s: Could not enable clocks for %s\n",
-                               oh->name, __func__);
-               return ret;
-       }
-
        /* sequence required to disable watchdog */
        __raw_writel(0xAAAA, base + OMAP_WDT_SPR);
        while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
@@ -58,11 +49,6 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh)
        while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
                cpu_relax();
 
-       ret = omap_hwmod_idle(oh);
-       if (ret)
-               pr_err("%s: Could not disable clocks for %s\n",
-                               oh->name, __func__);
-
-       return ret;
+       return 0;
 }