The machine DAI configuration glues all the codec and CPU DAIs together. It can
also be used to set up the DAI system clock and for any machine related DAI
initialisation e.g. the machine audio map can be connected to the codec audio
-map, unconnected codec pins can be set as such. Please see corgi.c, spitz.c
-for examples.
+map, unconnected codec pins can be set as such.
struct snd_soc_dai_link is used to set up each DAI in your machine. e.g.
The machine driver can optionally extend the codec power map and to become an
audio power map of the audio subsystem. This allows for automatic power up/down
of speaker/HP amplifiers, etc. Codec pins can be connected to the machines jack
-sockets in the machine init function. See soc/pxa/spitz.c and dapm.txt for
-details.
+sockets in the machine init function.
Machine Controls
#include <linux/module.h>
#include <linux/sigma.h>
-/* Return: 0==OK, <0==error, =1 ==no more actions */
+static size_t sigma_action_size(struct sigma_action *sa)
+{
+ size_t payload = 0;
+
+ switch (sa->instr) {
+ case SIGMA_ACTION_WRITEXBYTES:
+ case SIGMA_ACTION_WRITESINGLE:
+ case SIGMA_ACTION_WRITESAFELOAD:
+ payload = sigma_action_len(sa);
+ break;
+ default:
+ break;
+ }
+
+ payload = ALIGN(payload, 2);
+
+ return payload + sizeof(struct sigma_action);
+}
+
+/*
+ * Returns a negative error value in case of an error, 0 if processing of
+ * the firmware should be stopped after this action, 1 otherwise.
+ */
static int
-process_sigma_action(struct i2c_client *client, struct sigma_firmware *ssfw)
+process_sigma_action(struct i2c_client *client, struct sigma_action *sa)
{
- struct sigma_action *sa = (void *)(ssfw->fw->data + ssfw->pos);
size_t len = sigma_action_len(sa);
- int ret = 0;
+ int ret;
pr_debug("%s: instr:%i addr:%#x len:%zu\n", __func__,
sa->instr, sa->addr, len);
case SIGMA_ACTION_WRITEXBYTES:
case SIGMA_ACTION_WRITESINGLE:
case SIGMA_ACTION_WRITESAFELOAD:
- if (ssfw->fw->size < ssfw->pos + len)
- return -EINVAL;
ret = i2c_master_send(client, (void *)&sa->addr, len);
if (ret < 0)
return -EINVAL;
break;
-
case SIGMA_ACTION_DELAY:
- ret = 0;
udelay(len);
len = 0;
break;
-
case SIGMA_ACTION_END:
- return 1;
-
+ return 0;
default:
return -EINVAL;
}
- /* when arrive here ret=0 or sent data */
- ssfw->pos += sigma_action_size(sa, len);
- return ssfw->pos == ssfw->fw->size;
+ return 1;
}
static int
process_sigma_actions(struct i2c_client *client, struct sigma_firmware *ssfw)
{
- pr_debug("%s: processing %p\n", __func__, ssfw);
+ struct sigma_action *sa;
+ size_t size;
+ int ret;
+
+ while (ssfw->pos + sizeof(*sa) <= ssfw->fw->size) {
+ sa = (struct sigma_action *)(ssfw->fw->data + ssfw->pos);
+
+ size = sigma_action_size(sa);
+ ssfw->pos += size;
+ if (ssfw->pos > ssfw->fw->size || size == 0)
+ break;
+
+ ret = process_sigma_action(client, sa);
- while (1) {
- int ret = process_sigma_action(client, ssfw);
pr_debug("%s: action returned %i\n", __func__, ret);
- if (ret == 1)
- return 0;
- else if (ret)
+
+ if (ret <= 0)
return ret;
}
+
+ if (ssfw->pos != ssfw->fw->size)
+ return -EINVAL;
+
+ return 0;
}
int process_sigma_firmware(struct i2c_client *client, const char *name)
/* then verify the header */
ret = -EINVAL;
- if (fw->size < sizeof(*ssfw_head))
+
+ /*
+ * Reject too small or unreasonable large files. The upper limit has been
+ * chosen a bit arbitrarily, but it should be enough for all practical
+ * purposes and having the limit makes it easier to avoid integer
+ * overflows later in the loading process.
+ */
+ if (fw->size < sizeof(*ssfw_head) || fw->size >= 0x4000000)
goto done;
ssfw_head = (void *)fw->data;
if (memcmp(ssfw_head->magic, SIGMA_MAGIC, ARRAY_SIZE(ssfw_head->magic)))
goto done;
- crc = crc32(0, fw->data, fw->size);
+ crc = crc32(0, fw->data + sizeof(*ssfw_head),
+ fw->size - sizeof(*ssfw_head));
pr_debug("%s: crc=%x\n", __func__, crc);
- if (crc != ssfw_head->crc)
+ if (crc != le32_to_cpu(ssfw_head->crc))
goto done;
ssfw.pos = sizeof(*ssfw_head);
struct sigma_firmware_header {
unsigned char magic[7];
u8 version;
- u32 crc;
+ __le32 crc;
};
enum {
struct sigma_action {
u8 instr;
u8 len_hi;
- u16 len;
- u16 addr;
+ __le16 len;
+ __be16 addr;
unsigned char payload[];
};
static inline u32 sigma_action_len(struct sigma_action *sa)
{
- return (sa->len_hi << 16) | sa->len;
-}
-
-static inline size_t sigma_action_size(struct sigma_action *sa, u32 payload_len)
-{
- return sizeof(*sa) + payload_len + (payload_len % 2);
+ return (sa->len_hi << 16) | le16_to_cpu(sa->len);
}
extern int process_sigma_firmware(struct i2c_client *client, const char *name);
imux = &spec->input_mux[mux_idx];
if (!imux->num_items && mux_idx > 0)
imux = &spec->input_mux[0];
+ if (!imux->num_items)
+ return 0;
if (idx >= imux->num_items)
idx = imux->num_items - 1;
case AUTO_PIN_SPEAKER_OUT:
if (cfg->line_outs == 1)
return "Speaker";
+ if (cfg->line_outs == 2)
+ return ch ? "Bass Speaker" : "Speaker";
break;
case AUTO_PIN_HP_OUT:
/* for multi-io case, only the primary out */
if (!nid)
continue;
if (found_in_nid_list(nid, spec->multiout.dac_nids,
- spec->multiout.num_dacs))
+ ARRAY_SIZE(spec->private_dac_nids)))
continue;
if (found_in_nid_list(nid, spec->multiout.hp_out_nid,
ARRAY_SIZE(spec->multiout.hp_out_nid)))
return 0;
}
+/* return 0 if no possible DAC is found, 1 if one or more found */
static int alc_auto_fill_extra_dacs(struct hda_codec *codec, int num_outs,
const hda_nid_t *pins, hda_nid_t *dacs)
{
if (!dacs[i])
dacs[i] = alc_auto_look_for_dac(codec, pins[i]);
}
- return 0;
+ return 1;
}
static int alc_auto_fill_multi_ios(struct hda_codec *codec,
static int alc_auto_fill_dac_nids(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- const struct auto_pin_cfg *cfg = &spec->autocfg;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
unsigned int location, defcfg;
int num_pins;
bool redone = false;
spec->multiout.extra_out_nid[0] = 0;
memset(spec->private_dac_nids, 0, sizeof(spec->private_dac_nids));
spec->multiout.dac_nids = spec->private_dac_nids;
+ spec->multi_ios = 0;
/* fill hard-wired DACs first */
if (!redone) {
for (i = 0; i < cfg->line_outs; i++) {
if (spec->private_dac_nids[i])
spec->multiout.num_dacs++;
- else
+ else {
memmove(spec->private_dac_nids + i,
spec->private_dac_nids + i + 1,
sizeof(hda_nid_t) * (cfg->line_outs - i - 1));
+ spec->private_dac_nids[cfg->line_outs - 1] = 0;
+ }
}
if (cfg->line_outs == 1 && cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) {
if (cfg->line_out_type != AUTO_PIN_HP_OUT)
alc_auto_fill_extra_dacs(codec, cfg->hp_outs, cfg->hp_pins,
spec->multiout.hp_out_nid);
- if (cfg->line_out_type != AUTO_PIN_SPEAKER_OUT)
- alc_auto_fill_extra_dacs(codec, cfg->speaker_outs, cfg->speaker_pins,
- spec->multiout.extra_out_nid);
+ if (cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) {
+ int err = alc_auto_fill_extra_dacs(codec, cfg->speaker_outs,
+ cfg->speaker_pins,
+ spec->multiout.extra_out_nid);
+ /* if no speaker volume is assigned, try again as the primary
+ * output
+ */
+ if (!err && cfg->speaker_outs > 0 &&
+ cfg->line_out_type == AUTO_PIN_HP_OUT) {
+ cfg->hp_outs = cfg->line_outs;
+ memcpy(cfg->hp_pins, cfg->line_out_pins,
+ sizeof(cfg->hp_pins));
+ cfg->line_outs = cfg->speaker_outs;
+ memcpy(cfg->line_out_pins, cfg->speaker_pins,
+ sizeof(cfg->speaker_pins));
+ cfg->speaker_outs = 0;
+ memset(cfg->speaker_pins, 0, sizeof(cfg->speaker_pins));
+ cfg->line_out_type = AUTO_PIN_SPEAKER_OUT;
+ redone = false;
+ goto again;
+ }
+ }
if (!spec->multi_ios &&
cfg->line_out_type == AUTO_PIN_SPEAKER_OUT &&
}
static int alc_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin,
- hda_nid_t dac, const char *pfx)
+ hda_nid_t dac, const char *pfx,
+ int cidx)
{
struct alc_spec *spec = codec->spec;
hda_nid_t sw, vol;
if (is_ctl_used(spec->sw_ctls, val))
return 0; /* already created */
mark_ctl_usage(spec->sw_ctls, val);
- return add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx, val);
+ return __add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx, cidx, val);
}
sw = alc_look_for_out_mute_nid(codec, pin, dac);
vol = alc_look_for_out_vol_nid(codec, pin, dac);
- err = alc_auto_add_stereo_vol(codec, pfx, 0, vol);
+ err = alc_auto_add_stereo_vol(codec, pfx, cidx, vol);
if (err < 0)
return err;
- err = alc_auto_add_stereo_sw(codec, pfx, 0, sw);
+ err = alc_auto_add_stereo_sw(codec, pfx, cidx, sw);
if (err < 0)
return err;
return 0;
hda_nid_t dac = *dacs;
if (!dac)
dac = spec->multiout.dac_nids[0];
- return alc_auto_create_extra_out(codec, *pins, dac, pfx);
+ return alc_auto_create_extra_out(codec, *pins, dac, pfx, 0);
}
if (dacs[num_pins - 1]) {
/* OK, we have a multi-output system with individual volumes */
for (i = 0; i < num_pins; i++) {
- snprintf(name, sizeof(name), "%s %s",
- pfx, channel_name[i]);
- err = alc_auto_create_extra_out(codec, pins[i], dacs[i],
- name);
+ if (num_pins >= 3) {
+ snprintf(name, sizeof(name), "%s %s",
+ pfx, channel_name[i]);
+ err = alc_auto_create_extra_out(codec, pins[i], dacs[i],
+ name, 0);
+ } else {
+ err = alc_auto_create_extra_out(codec, pins[i], dacs[i],
+ pfx, i);
+ }
if (err < 0)
return err;
}
unsigned int gpio_mute;
unsigned int gpio_led;
unsigned int gpio_led_polarity;
+ unsigned int vref_mute_led_nid; /* pin NID for mute-LED vref control */
unsigned int vref_led;
/* stream */
spec->eapd_switch = val;
get_int_hint(codec, "gpio_led_polarity", &spec->gpio_led_polarity);
if (get_int_hint(codec, "gpio_led", &spec->gpio_led)) {
- if (spec->gpio_led <= 8) {
- spec->gpio_mask |= spec->gpio_led;
- spec->gpio_dir |= spec->gpio_led;
- if (spec->gpio_led_polarity)
- spec->gpio_data |= spec->gpio_led;
- }
+ spec->gpio_mask |= spec->gpio_led;
+ spec->gpio_dir |= spec->gpio_led;
+ if (spec->gpio_led_polarity)
+ spec->gpio_data |= spec->gpio_led;
}
}
/* power on when no jack detection is available */
/* or when the VREF is used for controlling LED */
if (!spec->hp_detect ||
- (spec->gpio_led > 8 && spec->gpio_led == nid)) {
+ spec->vref_mute_led_nid == nid) {
stac_toggle_power_map(codec, nid, 1);
continue;
}
if (sscanf(dev->name, "HP_Mute_LED_%d_%x",
&spec->gpio_led_polarity,
&spec->gpio_led) == 2) {
- if (spec->gpio_led < 4)
+ unsigned int max_gpio;
+ max_gpio = snd_hda_param_read(codec, codec->afg,
+ AC_PAR_GPIO_CAP);
+ max_gpio &= AC_GPIO_IO_COUNT;
+ if (spec->gpio_led < max_gpio)
spec->gpio_led = 1 << spec->gpio_led;
+ else
+ spec->vref_mute_led_nid = spec->gpio_led;
return 1;
}
if (sscanf(dev->name, "HP_Mute_LED_%d",
struct sigmatel_spec *spec = codec->spec;
/* sync mute LED */
- if (spec->gpio_led) {
- if (spec->gpio_led <= 8) {
- stac_gpio_set(codec, spec->gpio_mask,
- spec->gpio_dir, spec->gpio_data);
- } else {
- stac_vrefout_set(codec,
- spec->gpio_led, spec->vref_led);
- }
- }
+ if (spec->vref_mute_led_nid)
+ stac_vrefout_set(codec, spec->vref_mute_led_nid,
+ spec->vref_led);
+ else if (spec->gpio_led)
+ stac_gpio_set(codec, spec->gpio_mask,
+ spec->gpio_dir, spec->gpio_data);
return 0;
}
struct sigmatel_spec *spec = codec->spec;
if (power_state == AC_PWRST_D3) {
- if (spec->gpio_led > 8) {
+ if (spec->vref_mute_led_nid) {
/* with vref-out pin used for mute led control
* codec AFG is prevented from D3 state
*/
}
}
/*polarity defines *not* muted state level*/
- if (spec->gpio_led <= 8) {
+ if (!spec->vref_mute_led_nid) {
if (muted)
spec->gpio_data &= ~spec->gpio_led; /* orange */
else
muted_lvl = spec->gpio_led_polarity ?
AC_PINCTL_VREF_GRD : AC_PINCTL_VREF_HIZ;
spec->vref_led = muted ? muted_lvl : notmtd_lvl;
- stac_vrefout_set(codec, spec->gpio_led, spec->vref_led);
+ stac_vrefout_set(codec, spec->vref_mute_led_nid,
+ spec->vref_led);
}
return 0;
}
#ifdef CONFIG_SND_HDA_POWER_SAVE
if (spec->gpio_led) {
- if (spec->gpio_led <= 8) {
+ if (!spec->vref_mute_led_nid) {
spec->gpio_mask |= spec->gpio_led;
spec->gpio_dir |= spec->gpio_led;
spec->gpio_data |= spec->gpio_led;
#ifdef CONFIG_SND_HDA_POWER_SAVE
if (spec->gpio_led) {
- if (spec->gpio_led <= 8) {
+ if (!spec->vref_mute_led_nid) {
spec->gpio_mask |= spec->gpio_led;
spec->gpio_dir |= spec->gpio_led;
spec->gpio_data |= spec->gpio_led;
static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */
static int enable = 1;
+static int codecs = 1;
module_param(index, int, 0444);
MODULE_PARM_DESC(index, "Index value for SiS7019 Audio Accelerator.");
MODULE_PARM_DESC(id, "ID string for SiS7019 Audio Accelerator.");
module_param(enable, bool, 0444);
MODULE_PARM_DESC(enable, "Enable SiS7019 Audio Accelerator.");
+module_param(codecs, int, 0444);
+MODULE_PARM_DESC(codecs, "Set bit to indicate that codec number is expected to be present (default 1)");
static DEFINE_PCI_DEVICE_TABLE(snd_sis7019_ids) = {
{ PCI_DEVICE(PCI_VENDOR_ID_SI, 0x7019) },
dma_addr_t silence_dma_addr;
};
+/* These values are also used by the module param 'codecs' to indicate
+ * which codecs should be present.
+ */
#define SIS_PRIMARY_CODEC_PRESENT 0x0001
#define SIS_SECONDARY_CODEC_PRESENT 0x0002
#define SIS_TERTIARY_CODEC_PRESENT 0x0004
{
unsigned long io = sis->ioport;
void __iomem *ioaddr = sis->ioaddr;
+ unsigned long timeout;
u16 status;
int count;
int i;
while ((inw(io + SIS_AC97_STATUS) & SIS_AC97_STATUS_BUSY) && --count)
udelay(1);
+ /* Command complete, we can let go of the semaphore now.
+ */
+ outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA);
+ if (!count)
+ return -EIO;
+
/* Now that we've finished the reset, find out what's attached.
+ * There are some codec/board combinations that take an extremely
+ * long time to come up. 350+ ms has been observed in the field,
+ * so we'll give them up to 500ms.
*/
- status = inl(io + SIS_AC97_STATUS);
- if (status & SIS_AC97_STATUS_CODEC_READY)
- sis->codecs_present |= SIS_PRIMARY_CODEC_PRESENT;
- if (status & SIS_AC97_STATUS_CODEC2_READY)
- sis->codecs_present |= SIS_SECONDARY_CODEC_PRESENT;
- if (status & SIS_AC97_STATUS_CODEC3_READY)
- sis->codecs_present |= SIS_TERTIARY_CODEC_PRESENT;
-
- /* All done, let go of the semaphore, and check for errors
+ sis->codecs_present = 0;
+ timeout = msecs_to_jiffies(500) + jiffies;
+ while (time_before_eq(jiffies, timeout)) {
+ status = inl(io + SIS_AC97_STATUS);
+ if (status & SIS_AC97_STATUS_CODEC_READY)
+ sis->codecs_present |= SIS_PRIMARY_CODEC_PRESENT;
+ if (status & SIS_AC97_STATUS_CODEC2_READY)
+ sis->codecs_present |= SIS_SECONDARY_CODEC_PRESENT;
+ if (status & SIS_AC97_STATUS_CODEC3_READY)
+ sis->codecs_present |= SIS_TERTIARY_CODEC_PRESENT;
+
+ if (sis->codecs_present == codecs)
+ break;
+
+ msleep(1);
+ }
+
+ /* All done, check for errors.
*/
- outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA);
- if (!sis->codecs_present || !count)
+ if (!sis->codecs_present) {
+ printk(KERN_ERR "sis7019: could not find any codecs\n");
return -EIO;
+ }
+
+ if (sis->codecs_present != codecs) {
+ printk(KERN_WARNING "sis7019: missing codecs, found %0x, expected %0x\n",
+ sis->codecs_present, codecs);
+ }
/* Let the hardware know that the audio driver is alive,
* and enable PCM slots on the AC-link for L/R playback (3 & 4) and
if (!enable)
goto error_out;
+ /* The user can specify which codecs should be present so that we
+ * can wait for them to show up if they are slow to recover from
+ * the AC97 cold reset. We default to a single codec, the primary.
+ *
+ * We assume that SIS_PRIMARY_*_PRESENT matches bits 0-2.
+ */
+ codecs &= SIS_PRIMARY_CODEC_PRESENT | SIS_SECONDARY_CODEC_PRESENT |
+ SIS_TERTIARY_CODEC_PRESENT;
+ if (!codecs)
+ codecs = SIS_PRIMARY_CODEC_PRESENT;
+
rc = snd_card_create(index, id, THIS_MODULE, sizeof(*sis), &card);
if (rc < 0)
goto error_out;
config SND_ATMEL_SOC
tristate "SoC Audio for the Atmel System-on-Chip"
- depends on ARCH_AT91 || AVR32
+ depends on ARCH_AT91
help
Say Y or M if you want to add support for codecs attached to
the ATMEL SSC interface. You will also need
Say Y if you want to add support for SoC audio on WM8731-based
AT91sam9g20 evaluation board.
-config SND_AT32_SOC_PLAYPAQ
- tristate "SoC Audio support for PlayPaq with WM8510"
- depends on SND_ATMEL_SOC && BOARD_PLAYPAQ && AT91_PROGRAMMABLE_CLOCKS
- select SND_ATMEL_SOC_SSC
- select SND_SOC_WM8510
- help
- Say Y or M here if you want to add support for SoC audio
- on the LRS PlayPaq.
-
-config SND_AT32_SOC_PLAYPAQ_SLAVE
- bool "Run CODEC on PlayPaq in slave mode"
- depends on SND_AT32_SOC_PLAYPAQ
- default n
- help
- Say Y if you want to run with the AT32 SSC generating the BCLK
- and FRAME signals on the PlayPaq. Unless you want to play
- with the AT32 as the SSC master, you probably want to say N here,
- as this will give you better sound quality.
-
config SND_AT91_SOC_AFEB9260
tristate "SoC Audio support for AFEB9260 board"
depends on ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC
# AT91 Machine Support
snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o
-# AT32 Machine Support
-snd-soc-playpaq-objs := playpaq_wm8510.o
-
obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
-obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o
obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o
+++ /dev/null
-/* sound/soc/at32/playpaq_wm8510.c
- * ASoC machine driver for PlayPaq using WM8510 codec
- *
- * Copyright (C) 2008 Long Range Systems
- * Geoffrey Wossum <gwossum@acm.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c
- *
- * NOTE: If you don't have the AT32 enhanced portmux configured (which
- * isn't currently in the mainline or Atmel patched kernel), you will
- * need to set the MCLK pin (PA30) to peripheral A in your board initialization
- * code. Something like:
- * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
- *
- */
-
-/* #define DEBUG */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/portmux.h>
-
-#include "../codecs/wm8510.h"
-#include "atmel-pcm.h"
-#include "atmel_ssc_dai.h"
-
-
-/*-------------------------------------------------------------------------*\
- * constants
-\*-------------------------------------------------------------------------*/
-#define MCLK_PIN GPIO_PIN_PA(30)
-#define MCLK_PERIPH GPIO_PERIPH_A
-
-
-/*-------------------------------------------------------------------------*\
- * data types
-\*-------------------------------------------------------------------------*/
-/* SSC clocking data */
-struct ssc_clock_data {
- /* CMR div */
- unsigned int cmr_div;
-
- /* Frame period (as needed by xCMR.PERIOD) */
- unsigned int period;
-
- /* The SSC clock rate these settings where calculated for */
- unsigned long ssc_rate;
-};
-
-
-/*-------------------------------------------------------------------------*\
- * module data
-\*-------------------------------------------------------------------------*/
-static struct clk *_gclk0;
-static struct clk *_pll0;
-
-#define CODEC_CLK (_gclk0)
-
-
-/*-------------------------------------------------------------------------*\
- * Sound SOC operations
-\*-------------------------------------------------------------------------*/
-#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
-static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock(
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *cpu_dai)
-{
- struct at32_ssc_info *ssc_p = snd_soc_dai_get_drvdata(cpu_dai);
- struct ssc_device *ssc = ssc_p->ssc;
- struct ssc_clock_data cd;
- unsigned int rate, width_bits, channels;
- unsigned int bitrate, ssc_div;
- unsigned actual_rate;
-
-
- /*
- * Figure out required bitrate
- */
- rate = params_rate(params);
- channels = params_channels(params);
- width_bits = snd_pcm_format_physical_width(params_format(params));
- bitrate = rate * width_bits * channels;
-
-
- /*
- * Figure out required SSC divider and period for required bitrate
- */
- cd.ssc_rate = clk_get_rate(ssc->clk);
- ssc_div = cd.ssc_rate / bitrate;
- cd.cmr_div = ssc_div / 2;
- if (ssc_div & 1) {
- /* round cmr_div up */
- cd.cmr_div++;
- }
- cd.period = width_bits - 1;
-
-
- /*
- * Find actual rate, compare to requested rate
- */
- actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1));
- pr_debug("playpaq_wm8510: Request rate = %u, actual rate = %u\n",
- rate, actual_rate);
-
-
- return cd;
-}
-#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
-
-
-
-static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- struct at32_ssc_info *ssc_p = snd_soc_dai_get_drvdata(cpu_dai);
- struct ssc_device *ssc = ssc_p->ssc;
- unsigned int pll_out = 0, bclk = 0, mclk_div = 0;
- int ret;
-
-
- /* Due to difficulties with getting the correct clocks from the AT32's
- * PLL0, we're going to let the CODEC be in charge of all the clocks
- */
-#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
- const unsigned int fmt = (SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
-#else
- struct ssc_clock_data cd;
- const unsigned int fmt = (SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBS_CFS);
-#endif
-
- if (ssc == NULL) {
- pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n");
- return -EINVAL;
- }
-
-
- /*
- * Figure out PLL and BCLK dividers for WM8510
- */
- switch (params_rate(params)) {
- case 48000:
- pll_out = 24576000;
- mclk_div = WM8510_MCLKDIV_2;
- bclk = WM8510_BCLKDIV_8;
- break;
-
- case 44100:
- pll_out = 22579200;
- mclk_div = WM8510_MCLKDIV_2;
- bclk = WM8510_BCLKDIV_8;
- break;
-
- case 22050:
- pll_out = 22579200;
- mclk_div = WM8510_MCLKDIV_4;
- bclk = WM8510_BCLKDIV_8;
- break;
-
- case 16000:
- pll_out = 24576000;
- mclk_div = WM8510_MCLKDIV_6;
- bclk = WM8510_BCLKDIV_8;
- break;
-
- case 11025:
- pll_out = 22579200;
- mclk_div = WM8510_MCLKDIV_8;
- bclk = WM8510_BCLKDIV_8;
- break;
-
- case 8000:
- pll_out = 24576000;
- mclk_div = WM8510_MCLKDIV_12;
- bclk = WM8510_BCLKDIV_8;
- break;
-
- default:
- pr_warning("playpaq_wm8510: Unsupported sample rate %d\n",
- params_rate(params));
- return -EINVAL;
- }
-
-
- /*
- * set CPU and CODEC DAI configuration
- */
- ret = snd_soc_dai_set_fmt(codec_dai, fmt);
- if (ret < 0) {
- pr_warning("playpaq_wm8510: "
- "Failed to set CODEC DAI format (%d)\n",
- ret);
- return ret;
- }
- ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
- if (ret < 0) {
- pr_warning("playpaq_wm8510: "
- "Failed to set CPU DAI format (%d)\n",
- ret);
- return ret;
- }
-
-
- /*
- * Set CPU clock configuration
- */
-#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
- cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai);
- pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n",
- cd.cmr_div, cd.period);
- ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div);
- if (ret < 0) {
- pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n",
- ret);
- return ret;
- }
- ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD,
- cd.period);
- if (ret < 0) {
- pr_warning("playpaq_wm8510: "
- "Failed to set CPU transmit period (%d)\n",
- ret);
- return ret;
- }
-#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
-
-
- /*
- * Set CODEC clock configuration
- */
- pr_debug("playpaq_wm8510: "
- "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n",
- clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div);
-
-
-#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
- ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk);
- if (ret < 0) {
- pr_warning
- ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n",
- ret);
- return ret;
- }
-#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
-
-
- ret = snd_soc_dai_set_pll(codec_dai, 0, 0,
- clk_get_rate(CODEC_CLK), pll_out);
- if (ret < 0) {
- pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n",
- ret);
- return ret;
- }
-
-
- ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div);
- if (ret < 0) {
- pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n",
- ret);
- return ret;
- }
-
-
- return 0;
-}
-
-
-
-static struct snd_soc_ops playpaq_wm8510_ops = {
- .hw_params = playpaq_wm8510_hw_params,
-};
-
-
-
-static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = {
- SND_SOC_DAPM_MIC("Int Mic", NULL),
- SND_SOC_DAPM_SPK("Ext Spk", NULL),
-};
-
-
-
-static const struct snd_soc_dapm_route intercon[] = {
- /* speaker connected to SPKOUT */
- {"Ext Spk", NULL, "SPKOUTP"},
- {"Ext Spk", NULL, "SPKOUTN"},
-
- {"Mic Bias", NULL, "Int Mic"},
- {"MICN", NULL, "Mic Bias"},
- {"MICP", NULL, "Mic Bias"},
-};
-
-
-
-static int playpaq_wm8510_init(struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_soc_codec *codec = rtd->codec;
- struct snd_soc_dapm_context *dapm = &codec->dapm;
- int i;
-
- /*
- * Add DAPM widgets
- */
- for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++)
- snd_soc_dapm_new_control(dapm, &playpaq_dapm_widgets[i]);
-
-
-
- /*
- * Setup audio path interconnects
- */
- snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon));
-
-
-
- /* always connected pins */
- snd_soc_dapm_enable_pin(dapm, "Int Mic");
- snd_soc_dapm_enable_pin(dapm, "Ext Spk");
-
-
-
- /* Make CSB show PLL rate */
- snd_soc_dai_set_clkdiv(rtd->codec_dai, WM8510_OPCLKDIV,
- WM8510_OPCLKDIV_1 | 4);
-
- return 0;
-}
-
-
-
-static struct snd_soc_dai_link playpaq_wm8510_dai = {
- .name = "WM8510",
- .stream_name = "WM8510 PCM",
- .cpu_dai_name= "atmel-ssc-dai.0",
- .platform_name = "atmel-pcm-audio",
- .codec_name = "wm8510-codec.0-0x1a",
- .codec_dai_name = "wm8510-hifi",
- .init = playpaq_wm8510_init,
- .ops = &playpaq_wm8510_ops,
-};
-
-
-
-static struct snd_soc_card snd_soc_playpaq = {
- .name = "LRS_PlayPaq_WM8510",
- .dai_link = &playpaq_wm8510_dai,
- .num_links = 1,
-};
-
-static struct platform_device *playpaq_snd_device;
-
-
-static int __init playpaq_asoc_init(void)
-{
- int ret = 0;
-
- /*
- * Configure MCLK for WM8510
- */
- _gclk0 = clk_get(NULL, "gclk0");
- if (IS_ERR(_gclk0)) {
- _gclk0 = NULL;
- ret = PTR_ERR(_gclk0);
- goto err_gclk0;
- }
- _pll0 = clk_get(NULL, "pll0");
- if (IS_ERR(_pll0)) {
- _pll0 = NULL;
- ret = PTR_ERR(_pll0);
- goto err_pll0;
- }
- ret = clk_set_parent(_gclk0, _pll0);
- if (ret) {
- pr_warning("snd-soc-playpaq: "
- "Failed to set PLL0 as parent for DAC clock\n");
- goto err_set_clk;
- }
- clk_set_rate(CODEC_CLK, 12000000);
- clk_enable(CODEC_CLK);
-
-#if defined CONFIG_AT32_ENHANCED_PORTMUX
- at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0);
-#endif
-
-
- /*
- * Create and register platform device
- */
- playpaq_snd_device = platform_device_alloc("soc-audio", 0);
- if (playpaq_snd_device == NULL) {
- ret = -ENOMEM;
- goto err_device_alloc;
- }
-
- platform_set_drvdata(playpaq_snd_device, &snd_soc_playpaq);
-
- ret = platform_device_add(playpaq_snd_device);
- if (ret) {
- pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n",
- ret);
- goto err_device_add;
- }
-
- return 0;
-
-
-err_device_add:
- if (playpaq_snd_device != NULL) {
- platform_device_put(playpaq_snd_device);
- playpaq_snd_device = NULL;
- }
-err_device_alloc:
-err_set_clk:
- if (_pll0 != NULL) {
- clk_put(_pll0);
- _pll0 = NULL;
- }
-err_pll0:
- if (_gclk0 != NULL) {
- clk_put(_gclk0);
- _gclk0 = NULL;
- }
- return ret;
-}
-
-
-static void __exit playpaq_asoc_exit(void)
-{
- if (_gclk0 != NULL) {
- clk_put(_gclk0);
- _gclk0 = NULL;
- }
- if (_pll0 != NULL) {
- clk_put(_pll0);
- _pll0 = NULL;
- }
-
-#if defined CONFIG_AT32_ENHANCED_PORTMUX
- at32_free_pin(MCLK_PIN);
-#endif
-
- platform_device_unregister(playpaq_snd_device);
- playpaq_snd_device = NULL;
-}
-
-module_init(playpaq_asoc_init);
-module_exit(playpaq_asoc_exit);
-
-MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>");
-MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq");
-MODULE_LICENSE("GPL");
#define AD1836_ADC_CTRL2 13
#define AD1836_ADC_WORD_LEN_MASK 0x30
-#define AD1836_ADC_WORD_OFFSET 5
+#define AD1836_ADC_WORD_OFFSET 4
#define AD1836_ADC_SERFMT_MASK (7 << 6)
#define AD1836_ADC_SERFMT_PCK256 (0x4 << 6)
#define AD1836_ADC_SERFMT_PCK128 (0x5 << 6)
static int cs4270_soc_resume(struct snd_soc_codec *codec)
{
struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
- struct i2c_client *i2c_client = to_i2c_client(codec->dev);
int reg;
regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
ndelay(500);
/* first restore the entire register cache ... */
- for (reg = CS4270_FIRSTREG; reg <= CS4270_LASTREG; reg++) {
- u8 val = snd_soc_read(codec, reg);
-
- if (i2c_smbus_write_byte_data(i2c_client, reg, val)) {
- dev_err(codec->dev, "i2c write failed\n");
- return -EIO;
- }
- }
+ snd_soc_cache_sync(codec);
/* ... then disable the power-down bits */
reg = snd_soc_read(codec, CS4270_PWRCTL);
static struct snd_soc_codec_driver soc_codec_device_cs42l51 = {
.probe = cs42l51_probe,
- .reg_cache_size = CS42L51_NUMREGS,
+ .reg_cache_size = CS42L51_NUMREGS + 1,
.reg_word_size = sizeof(u8),
};
unsigned int mask = mc->max;
unsigned int val = (ucontrol->value.integer.value[0] & mask);
unsigned int val2 = (ucontrol->value.integer.value[1] & mask);
- unsigned int change = 1;
+ unsigned int change = 0;
- if (((max9877_regs[reg] >> shift) & mask) == val)
- change = 0;
+ if (((max9877_regs[reg] >> shift) & mask) != val)
+ change = 1;
- if (((max9877_regs[reg2] >> shift) & mask) == val2)
- change = 0;
+ if (((max9877_regs[reg2] >> shift) & mask) != val2)
+ change = 1;
if (change) {
max9877_regs[reg] &= ~(mask << shift);
static int __init uda1380_modinit(void)
{
- int ret;
+ int ret = 0;
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
ret = i2c_add_driver(&uda1380_i2c_driver);
if (ret != 0)
pr_err("Failed to register UDA1380 I2C driver: %d\n", ret);
#endif
- return 0;
+ return ret;
}
module_init(uda1380_modinit);
};
static const struct snd_soc_dapm_widget wm8994_adc_revd_widgets[] = {
-SND_SOC_DAPM_MUX_E("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux,
- adc_mux_ev, SND_SOC_DAPM_PRE_PMU),
-SND_SOC_DAPM_MUX_E("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux,
- adc_mux_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_VIRT_MUX_E("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux,
+ adc_mux_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_VIRT_MUX_E("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux,
+ adc_mux_ev, SND_SOC_DAPM_PRE_PMU),
};
static const struct snd_soc_dapm_widget wm8994_adc_widgets[] = {
-SND_SOC_DAPM_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux),
-SND_SOC_DAPM_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux),
+SND_SOC_DAPM_VIRT_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux),
+SND_SOC_DAPM_VIRT_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux),
};
static const struct snd_soc_dapm_widget wm8994_dapm_widgets[] = {
bclk |= best << WM8994_AIF1_BCLK_DIV_SHIFT;
lrclk = bclk_rate / params_rate(params);
+ if (!lrclk) {
+ dev_err(dai->dev, "Unable to generate LRCLK from %dHz BCLK\n",
+ bclk_rate);
+ return -EINVAL;
+ }
dev_dbg(dai->dev, "Using LRCLK rate %d for actual LRCLK %dHz\n",
lrclk, bclk_rate / lrclk);
switch (wm8994->revision) {
case 0:
case 1:
+ case 2:
+ case 3:
wm8994->hubs.dcs_codes_l = -9;
wm8994->hubs.dcs_codes_r = -5;
break;
}
if (strcasecmp(sprop, "i2s-slave") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_I2S;
+ machine_data->dai_format =
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM;
machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
}
machine_data->clk_frequency = be32_to_cpup(iprop);
} else if (strcasecmp(sprop, "i2s-master") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_I2S;
+ machine_data->dai_format =
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS;
machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
} else if (strcasecmp(sprop, "lj-slave") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J;
+ machine_data->dai_format =
+ SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM;
machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
} else if (strcasecmp(sprop, "lj-master") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J;
+ machine_data->dai_format =
+ SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBS_CFS;
machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
} else if (strcasecmp(sprop, "rj-slave") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J;
+ machine_data->dai_format =
+ SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBM_CFM;
machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
} else if (strcasecmp(sprop, "rj-master") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J;
+ machine_data->dai_format =
+ SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBS_CFS;
machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
} else if (strcasecmp(sprop, "ac97-slave") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_AC97;
+ machine_data->dai_format =
+ SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBM_CFM;
machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
} else if (strcasecmp(sprop, "ac97-master") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_AC97;
+ machine_data->dai_format =
+ SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBS_CFS;
machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
} else {
config SND_SOC_MX27VIS_AIC32X4
tristate "SoC audio support for Visstrim M10 boards"
- depends on MACH_IMX27_VISSTRIM_M10
+ depends on MACH_IMX27_VISSTRIM_M10 && I2C
select SND_SOC_TLV320AIC32X4
select SND_MXC_SOC_MX2
help
config SND_KIRKWOOD_SOC_OPENRD
tristate "SoC Audio support for Kirkwood Openrd Client"
depends on SND_KIRKWOOD_SOC && (MACH_OPENRD_CLIENT || MACH_OPENRD_ULTIMATE)
+ depends on I2C
select SND_KIRKWOOD_SOC_I2S
select SND_SOC_CS42L51
help
config SND_KIRKWOOD_SOC_T5325
tristate "SoC Audio support for HP t5325"
- depends on SND_KIRKWOOD_SOC && MACH_T5325
+ depends on SND_KIRKWOOD_SOC && MACH_T5325 && I2C
select SND_KIRKWOOD_SOC_I2S
select SND_SOC_ALC5623
help
config SND_SOC_RAUMFELD
tristate "SoC Audio support Raumfeld audio adapter"
depends on SND_PXA2XX_SOC && (MACH_RAUMFELD_SPEAKER || MACH_RAUMFELD_CONNECTOR)
+ depends on I2C && SPI_MASTER
select SND_PXA_SOC_SSP
select SND_SOC_CS4270
select SND_SOC_AK4104
config SND_PXA2XX_SOC_HX4700
tristate "SoC Audio support for HP iPAQ hx4700"
- depends on SND_PXA2XX_SOC && MACH_H4700
+ depends on SND_PXA2XX_SOC && MACH_H4700 && I2C
select SND_PXA2XX_SOC_I2S
select SND_SOC_AK4641
help
#include "../codecs/wm8994.h"
#include <sound/pcm_params.h>
+#include <linux/module.h>
/*
* Default CFG switch settings to use this driver:
snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic");
snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC");
snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC");
- snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker");
+ snd_soc_dapm_ignore_suspend(&card->dapm, "Main Speaker");
snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output");
snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input");
struct snd_soc_card *card = dev_get_drvdata(dev);
int i, ac97_control = 0;
+ /* If the initialization of this soc device failed, there is no codec
+ * associated with it. Just bail out in this case.
+ */
+ if (list_empty(&card->codec_dev_list))
+ return 0;
+
/* AC97 devices might have other drivers hanging off them so
* need to resume immediately. Other drivers don't have that
* problem and may take a substantial amount of time to resume
}
EXPORT_SYMBOL_GPL(snd_soc_params_to_bclk);
-static struct snd_soc_platform_driver dummy_platform;
+static const struct snd_pcm_hardware dummy_dma_hardware = {
+ .formats = 0xffffffff,
+ .channels_min = 1,
+ .channels_max = UINT_MAX,
+
+ /* Random values to keep userspace happy when checking constraints */
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
+ .buffer_bytes_max = 128*1024,
+ .period_bytes_min = PAGE_SIZE,
+ .period_bytes_max = PAGE_SIZE*2,
+ .periods_min = 2,
+ .periods_max = 128,
+};
+
+static int dummy_dma_open(struct snd_pcm_substream *substream)
+{
+ snd_soc_set_runtime_hwparams(substream, &dummy_dma_hardware);
+
+ return 0;
+}
+
+static struct snd_pcm_ops dummy_dma_ops = {
+ .open = dummy_dma_open,
+ .ioctl = snd_pcm_lib_ioctl,
+};
+
+static struct snd_soc_platform_driver dummy_platform = {
+ .ops = &dummy_dma_ops,
+};
static __devinit int snd_soc_dummy_probe(struct platform_device *pdev)
{