]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
drm/i915: Treat PCH eDP like DP in most places
authorKeith Packard <keithp@keithp.com>
Wed, 2 Nov 2011 02:54:11 +0000 (19:54 -0700)
committerKeith Packard <keithp@keithp.com>
Thu, 17 Nov 2011 04:26:26 +0000 (20:26 -0800)
PCH eDP has many of the same needs as regular PCH DP connections,
including the DP_CTl bit settings, the TRANS_DP_CTL register.

Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_dp.c

index 591eb0ed311036a313f15527cf834555d6eae2b0..e77a863a3833f63511a98991508b2f5c1a6ee0d1 100644 (file)
@@ -2933,7 +2933,8 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
 
        /* For PCH DP, enable TRANS_DP_CTL */
        if (HAS_PCH_CPT(dev) &&
-           intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+           (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+            intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
                u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
                reg = TRANS_DP_CTL(pipe);
                temp = I915_READ(reg);
index 2c0c482222e192ca76799b40bcd642e02fe879f2..d1eabd4165c4506d52d8d3e8b185c66076dd8374 100644 (file)
@@ -766,10 +766,10 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
                        continue;
 
                intel_dp = enc_to_intel_dp(encoder);
-               if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) {
+               if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || is_pch_edp(intel_dp)) {
                        lane_count = intel_dp->lane_count;
                        break;
-               } else if (is_edp(intel_dp)) {
+               } else if (is_cpu_edp(intel_dp)) {
                        lane_count = dev_priv->edp.lanes;
                        break;
                }
@@ -808,6 +808,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
                  struct drm_display_mode *adjusted_mode)
 {
        struct drm_device *dev = encoder->dev;
+       struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
        struct drm_crtc *crtc = intel_dp->base.base.crtc;
        struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
@@ -820,18 +821,31 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
                        ironlake_edp_pll_off(encoder);
        }
 
-       intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
-       intel_dp->DP |= intel_dp->color_range;
+       /*
+        * There are three kinds of DP registers:
+        *
+        *      IBX PCH
+        *      CPU
+        *      CPT PCH
+        *
+        * IBX PCH and CPU are the same for almost everything,
+        * except that the CPU DP PLL is configured in this
+        * register
+        *
+        * CPT PCH is quite different, having many bits moved
+        * to the TRANS_DP_CTL register instead. That
+        * configuration happens (oddly) in ironlake_pch_enable
+        */
 
-       if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
-               intel_dp->DP |= DP_SYNC_HS_HIGH;
-       if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
-               intel_dp->DP |= DP_SYNC_VS_HIGH;
+       /* Preserve the BIOS-computed detected bit. This is
+        * supposed to be read-only.
+        */
+       intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED;
+       intel_dp->DP |=  DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
 
-       if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
-               intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
-       else
-               intel_dp->DP |= DP_LINK_TRAIN_OFF;
+       /* Handle DP bits in common between all three register formats */
+
+       intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
 
        switch (intel_dp->lane_count) {
        case 1:
@@ -850,32 +864,45 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
                intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
                intel_write_eld(encoder, adjusted_mode);
        }
-
        memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
        intel_dp->link_configuration[0] = intel_dp->link_bw;
        intel_dp->link_configuration[1] = intel_dp->lane_count;
        intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B;
-
        /*
         * Check for DPCD version > 1.1 and enhanced framing support
         */
        if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
            (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) {
                intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
-               intel_dp->DP |= DP_ENHANCED_FRAMING;
        }
 
-       /* CPT DP's pipe select is decided in TRANS_DP_CTL */
-       if (intel_crtc->pipe == 1 && !HAS_PCH_CPT(dev))
-               intel_dp->DP |= DP_PIPEB_SELECT;
+       /* Split out the IBX/CPU vs CPT settings */
 
-       if (is_cpu_edp(intel_dp)) {
-               /* don't miss out required setting for eDP */
-               intel_dp->DP |= DP_PLL_ENABLE;
-               if (adjusted_mode->clock < 200000)
-                       intel_dp->DP |= DP_PLL_FREQ_160MHZ;
-               else
-                       intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+       if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
+               intel_dp->DP |= intel_dp->color_range;
+
+               if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+                       intel_dp->DP |= DP_SYNC_HS_HIGH;
+               if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+                       intel_dp->DP |= DP_SYNC_VS_HIGH;
+               intel_dp->DP |= DP_LINK_TRAIN_OFF;
+
+               if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN)
+                       intel_dp->DP |= DP_ENHANCED_FRAMING;
+
+               if (intel_crtc->pipe == 1)
+                       intel_dp->DP |= DP_PIPEB_SELECT;
+
+               if (is_cpu_edp(intel_dp)) {
+                       /* don't miss out required setting for eDP */
+                       intel_dp->DP |= DP_PLL_ENABLE;
+                       if (adjusted_mode->clock < 200000)
+                               intel_dp->DP |= DP_PLL_FREQ_160MHZ;
+                       else
+                               intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+               }
+       } else {
+               intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
        }
 }
 
@@ -1341,6 +1368,7 @@ static char       *link_train_names[] = {
  * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
  */
 #define I830_DP_VOLTAGE_MAX        DP_TRAIN_VOLTAGE_SWING_800
+#define I830_DP_VOLTAGE_MAX_CPT            DP_TRAIN_VOLTAGE_SWING_1200
 
 static uint8_t
 intel_dp_pre_emphasis_max(uint8_t voltage_swing)
@@ -1378,8 +1406,12 @@ intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_ST
                        p = this_p;
        }
 
-       if (v >= I830_DP_VOLTAGE_MAX)
-               v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
+       if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+               voltage_max = I830_DP_VOLTAGE_MAX_CPT;
+       else
+               voltage_max = I830_DP_VOLTAGE_MAX;
+       if (v >= voltage_max)
+               v = voltage_max | DP_TRAIN_MAX_SWING_REACHED;
 
        if (p >= intel_dp_pre_emphasis_max(v))
                p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
@@ -1570,7 +1602,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
                /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
                uint8_t     link_status[DP_LINK_STATUS_SIZE];
                uint32_t    signal_levels;
-               if (IS_GEN6(dev) && is_edp(intel_dp)) {
+
+               if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
                        signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
                        DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
                } else {
@@ -1650,12 +1683,11 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
                        break;
                }
 
-               if (IS_GEN6(dev) && is_edp(intel_dp)) {
+               if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
                        signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
                        DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
                } else {
                        signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
-                       DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels);
                        DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
                }
 
@@ -1741,8 +1773,12 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 
        msleep(17);
 
-       if (is_edp(intel_dp))
-               DP |= DP_LINK_TRAIN_OFF;
+       if (is_edp(intel_dp)) {
+               if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+                       DP |= DP_LINK_TRAIN_OFF_CPT;
+               else
+                       DP |= DP_LINK_TRAIN_OFF;
+       }
 
        if (!HAS_PCH_CPT(dev) &&
            I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
@@ -2186,7 +2222,8 @@ intel_trans_dp_port_sel(struct drm_crtc *crtc)
                        continue;
 
                intel_dp = enc_to_intel_dp(encoder);
-               if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT)
+               if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT ||
+                   intel_dp->base.type == INTEL_OUTPUT_EDP)
                        return intel_dp->output_reg;
        }