From: Jon Mason Date: Fri, 4 Nov 2016 05:10:59 +0000 (-0400) Subject: Documentation: devicetree: net: add NS2 bindings to amac X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0086f0944f8f2bfc3f029dcd4759b96dfb82a2af;p=linux-beck.git Documentation: devicetree: net: add NS2 bindings to amac Clean-up the documentation to the bgmac-amac driver, per suggestion by Rob Herring, and add details for NS2 support. Signed-off-by: Jon Mason Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt index ba5ecc1041a5..2fefa1a44afd 100644 --- a/Documentation/devicetree/bindings/net/brcm,amac.txt +++ b/Documentation/devicetree/bindings/net/brcm,amac.txt @@ -2,11 +2,17 @@ Broadcom AMAC Ethernet Controller Device Tree Bindings ------------------------------------------------------------- Required properties: - - compatible: "brcm,amac" or "brcm,nsp-amac" - - reg: Address and length of the GMAC registers, - Address and length of the GMAC IDM registers - - reg-names: Names of the registers. Must have both "amac_base" and - "idm_base" + - compatible: "brcm,amac" + "brcm,nsp-amac" + "brcm,ns2-amac" + - reg: Address and length of the register set for the device. It + contains the information of registers in the same order as + described by reg-names + - reg-names: Names of the registers. + "amac_base": Address and length of the GMAC registers + "idm_base": Address and length of the GMAC IDM registers + "nicpm_base": Address and length of the NIC Port Manager + registers (required for Northstar2) - interrupts: Interrupt number Optional properties: