From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Date: Thu, 20 Jun 2013 14:42:30 +0000 (+0200)
Subject: ARM: dts: omap3-igep: add pinmux node for GPIO LED configuration
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=00964a90728d752abe61ad134dac8c13491c3595;p=linux-beck.git

ARM: dts: omap3-igep: add pinmux node for GPIO LED configuration

IGEP boards have a number of LED connected to OMAP or TWL GPIO
lines. The actual wiring is different on each board so each board
DT has need to configure the mux correctly.

Even though it works with the current DT, the kernel complains with:

[2.305023] leds-gpio leds.18: pins are not configured from the driver

Add an empty pinmux_leds_pins pinctrl child node so boards can
override with the correct mux configuration and not depend on
default values for the GPIO LEDs to work.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
---

diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index 2326d11462a5..0f92224dc4fc 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -77,6 +77,8 @@
 			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
 		>;
 	};
+
+	leds_pins: pinmux_leds_pins { };
 };
 
 &i2c1 {