From: Linas Vepstas Date: Thu, 31 Aug 2006 21:27:52 +0000 (-0700) Subject: ixgb: Add PCI Error recovery callbacks X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=01748fbb413d6f3b36c330544969d1d7254ee509;p=linux-beck.git ixgb: Add PCI Error recovery callbacks Adds PCI Error recovery callbacks to the Intel 10-gigabit ethernet ixgb device driver. Lightly tested, works. "Zhang, Yanmin" wrote: Both pci_disable_device and ixgb_down would access the device. It doesn't follow Documentation/pci-error-recovery.txt that error_detected shouldn't do any access to the device. Signed-off-by: Linas Vepstas Signed-off-by: Andrew Morton Signed-off-by: Auke Kok --- diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index a5da48a1fca0..abca75fd2892 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -118,15 +118,26 @@ static void ixgb_restore_vlan(struct ixgb_adapter *adapter); static void ixgb_netpoll(struct net_device *dev); #endif -/* Exported from other modules */ +static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev, + enum pci_channel_state state); +static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev); +static void ixgb_io_resume (struct pci_dev *pdev); +/* Exported from other modules */ extern void ixgb_check_options(struct ixgb_adapter *adapter); +static struct pci_error_handlers ixgb_err_handler = { + .error_detected = ixgb_io_error_detected, + .slot_reset = ixgb_io_slot_reset, + .resume = ixgb_io_resume, +}; + static struct pci_driver ixgb_driver = { .name = ixgb_driver_name, .id_table = ixgb_pci_tbl, .probe = ixgb_probe, .remove = __devexit_p(ixgb_remove), + .err_handler = &ixgb_err_handler }; MODULE_AUTHOR("Intel Corporation, "); @@ -1550,6 +1561,11 @@ void ixgb_update_stats(struct ixgb_adapter *adapter) { struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + + /* Prevent stats update while adapter is being reset */ + if (pdev->error_state && pdev->error_state != pci_channel_io_normal) + return; if((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) || (netdev->mc_count > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) { @@ -2205,4 +2221,98 @@ static void ixgb_netpoll(struct net_device *dev) } #endif +/** + * ixgb_io_error_detected() - called when PCI error is detected + * @pdev pointer to pci device with error + * @state pci channel state after error + * + * This callback is called by the PCI subsystem whenever + * a PCI bus error is detected. + */ +static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev, + enum pci_channel_state state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgb_adapter *adapter = netdev->priv; + + if(netif_running(netdev)) + ixgb_down(adapter, TRUE); + + pci_disable_device(pdev); + + /* Request a slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * ixgb_io_slot_reset - called after the pci bus has been reset. + * @pdev pointer to pci device with error + * + * This callback is called after the PCI buss has been reset. + * Basically, this tries to restart the card from scratch. + * This is a shortened version of the device probe/discovery code, + * it resembles the first-half of the ixgb_probe() routine. + */ +static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgb_adapter *adapter = netdev->priv; + + if(pci_enable_device(pdev)) { + DPRINTK(PROBE, ERR, "Cannot re-enable PCI device after reset.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + + /* Perform card reset only on one instance of the card */ + if (0 != PCI_FUNC (pdev->devfn)) + return PCI_ERS_RESULT_RECOVERED; + + pci_set_master(pdev); + + netif_carrier_off(netdev); + netif_stop_queue(netdev); + ixgb_reset(adapter); + + /* Make sure the EEPROM is good */ + if(!ixgb_validate_eeprom_checksum(&adapter->hw)) { + DPRINTK(PROBE, ERR, "After reset, the EEPROM checksum is not valid.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr); + memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); + + if(!is_valid_ether_addr(netdev->perm_addr)) { + DPRINTK(PROBE, ERR, "After reset, invalid MAC address.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * ixgb_io_resume - called when its OK to resume normal operations + * @pdev pointer to pci device with error + * + * The error recovery driver tells us that its OK to resume + * normal operation. Implementation resembles the second-half + * of the ixgb_probe() routine. + */ +static void ixgb_io_resume (struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct ixgb_adapter *adapter = netdev->priv; + + pci_set_master(pdev); + + if(netif_running(netdev)) { + if(ixgb_up(adapter)) { + printk ("ixgb: can't bring device back up after reset\n"); + return; + } + } + + netif_device_attach(netdev); + mod_timer(&adapter->watchdog_timer, jiffies); +} + /* ixgb_main.c */