From: Felipe Balbi <balbi@ti.com>
Date: Thu, 6 Aug 2015 15:47:16 +0000 (-0500)
Subject: usb: musb: gadget: remove remaining DMA ifdeferry
X-Git-Tag: v4.3-rc1~156^2~35^2~4
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=03840fad004ce8a56bc8b3bb60a2df10f6f9481e;p=karo-tx-linux.git

usb: musb: gadget: remove remaining DMA ifdeferry

Commit fb91cddc54e7 ("usb: musb: Remove DMA
ifdef for musb_gadget.c short_packet") tried
to remove DMA ifdeferry from musb_gadget.c
but ended up leaving some around.

Remove them so that when building kernels with
all DMA engines enabled, we don't end up trying
to allocte channels twice.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 5f52bcb4bf78..cc503591b634 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -313,8 +313,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
 
 		/* MUSB_TXCSR_P_ISO is still set correctly */
 
-#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA)
-		{
+		if (musb_dma_inventra(musb) || musb_dma_ux500(musb)) {
 			if (request_size < musb_ep->packet_sz)
 				musb_ep->dma->desired_mode = 0;
 			else
@@ -365,7 +364,6 @@ static void txstate(struct musb *musb, struct musb_request *req)
 			}
 		}
 
-#endif
 		if (is_cppi_enabled(musb)) {
 			/* program endpoint CSR first, then setup DMA */
 			csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
@@ -641,8 +639,10 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 			use_mode_1 = 0;
 
 		if (request->actual < request->length) {
-#ifdef CONFIG_USB_INVENTRA_DMA
-			if (is_buffer_mapped(req)) {
+			if (!is_buffer_mapped(req))
+				goto buffer_aint_mapped;
+
+			if (musb_dma_inventra(musb)) {
 				struct dma_controller	*c;
 				struct dma_channel	*channel;
 				int			use_dma = 0;
@@ -716,8 +716,8 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 				if (use_dma)
 					return;
 			}
-#elif defined(CONFIG_USB_UX500_DMA)
-			if ((is_buffer_mapped(req)) &&
+
+			if ((musb_dma_ux500(musb)) &&
 				(request->actual < request->length)) {
 
 				struct dma_controller *c;
@@ -765,7 +765,6 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 
 					return;
 			}
-#endif	/* Mentor's DMA */
 
 			len = request->length - request->actual;
 			dev_dbg(musb->controller, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n",
@@ -775,8 +774,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 
 			fifo_count = min_t(unsigned, len, fifo_count);
 
-#ifdef	CONFIG_USB_TUSB_OMAP_DMA
-			if (tusb_dma_omap(musb) && is_buffer_mapped(req)) {
+			if (tusb_dma_omap(musb)) {
 				struct dma_controller *c = musb->dma_controller;
 				struct dma_channel *channel = musb_ep->dma;
 				u32 dma_addr = request->dma + request->actual;
@@ -790,23 +788,22 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 				if (ret)
 					return;
 			}
-#endif
+
 			/*
 			 * Unmap the dma buffer back to cpu if dma channel
 			 * programming fails. This buffer is mapped if the
 			 * channel allocation is successful
 			 */
-			 if (is_buffer_mapped(req)) {
-				unmap_dma_buffer(req, musb);
-
-				/*
-				 * Clear DMAENAB and AUTOCLEAR for the
-				 * PIO mode transfer
-				 */
-				csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
-				musb_writew(epio, MUSB_RXCSR, csr);
-			}
+			unmap_dma_buffer(req, musb);
+
+			/*
+			 * Clear DMAENAB and AUTOCLEAR for the
+			 * PIO mode transfer
+			 */
+			csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
+			musb_writew(epio, MUSB_RXCSR, csr);
 
+buffer_aint_mapped:
 			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
 					(request->buf + request->actual));
 			request->actual += fifo_count;