From: Zoltan HERPAI Date: Mon, 30 Jun 2014 21:57:56 +0000 (+0200) Subject: ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=04089927981f295b42cd695485383b2d11283d59;p=linux-beck.git ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3 The LinkSprite pcDuino V3 is an A20 based development board featuring arduino compatible io headers, 1G RAM, 4G nand, sata, rtl8188cus usb wifi and 100 Mbit ethernet using an ip101a phy: http://www.pcduino.com/pcduino-v3/ Signed-off-by: Zoltan HERPAI [hdegoede@redhat.com: Various cleanups, correct led pins] [hdegoede@redhat.com: Add axp209, ir and gpio-keys nodes] Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 774a14b91151..796fea874183 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -379,7 +379,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ sun7i-a20-i12-tvbox.dtb \ - sun7i-a20-olinuxino-micro.dtb + sun7i-a20-olinuxino-micro.dtb \ + sun7i-a20-pcduino3.dtb dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-ippo-q8h-v5.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts new file mode 100644 index 000000000000..046dfc0d45d8 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -0,0 +1,173 @@ +/* + * Copyright 2014 Zoltan HERPAI + * Zoltan HERPAI + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" +#include +#include + +/ { + model = "LinkSprite pcDuino3"; + compatible = "linksprite,pcduino3", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + ahci_pwr_pin_a: ahci_pwr_pin@0 { + allwinner,pins = "PH2"; + }; + + led_pins_pcduino3: led_pins@0 { + allwinner,pins = "PH15", "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + key_pins_pcduino3: key_pins@0 { + allwinner,pins = "PH17", "PH18", "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_pcduino3>; + + tx { + label = "pcduino3:green:tx"; + gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; + }; + + rx { + label = "pcduino3:green:rx"; + gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_pcduino3>; + #address-cells = <1>; + #size-cells = <0>; + button@0 { + label = "Key Back"; + linux,code = ; + gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; + }; + button@1 { + label = "Key Home"; + linux,code = ; + gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; + }; + button@2 { + label = "Key Menu"; + linux,code = ; + gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_ahci_5v: ahci-5v { + gpio = <&pio 7 2 0>; + status = "okay"; + }; +};