From: Daniel Vetter Date: Sat, 28 Jan 2012 13:49:24 +0000 (+0100) Subject: drm/i915: correctly program the VSYNCSHIFT register X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0529a0d9f0e702fd5215a493b7440be73f5941af;p=linux-beck.git drm/i915: correctly program the VSYNCSHIFT register The hw seems to use this to correctly insert the required delay before/after an even/odd interlaced field. This might also explain why we need to substract 1 half-line from vtotal - if the hw just adds the delay programmend in VSYNCSHIFT the total frame time would be about that too long. These registers seems to only exist on gen4 and later. For paranoia also program it to 0 for progressive modes, but according to documentation the hw should just ignore it in this case. Reviewed-by: Paulo Zanoni Tested-by: Paulo Zanoni Tested-by: Alfonso Fiore Signed-Off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 3369f829f46f..7eabdf056afb 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1384,6 +1384,7 @@ #define _VSYNC_A 0x60014 #define _PIPEASRC 0x6001c #define _BCLRPAT_A 0x60020 +#define _VSYNCSHIFT_A 0x60028 /* Pipe B timing regs */ #define _HTOTAL_B 0x61000 @@ -1394,6 +1395,8 @@ #define _VSYNC_B 0x61014 #define _PIPEBSRC 0x6101c #define _BCLRPAT_B 0x61020 +#define _VSYNCSHIFT_B 0x61028 + #define HTOTAL(pipe) _PIPE(pipe, _HTOTAL_A, _HTOTAL_B) #define HBLANK(pipe) _PIPE(pipe, _HBLANK_A, _HBLANK_B) @@ -1402,6 +1405,7 @@ #define VBLANK(pipe) _PIPE(pipe, _VBLANK_A, _VBLANK_B) #define VSYNC(pipe) _PIPE(pipe, _VSYNC_A, _VSYNC_B) #define BCLRPAT(pipe) _PIPE(pipe, _BCLRPAT_A, _BCLRPAT_B) +#define VSYNCSHIFT(pipe) _PIPE(pipe, _VSYNCSHIFT_A, _VSYNCSHIFT_B) /* VGA port control */ #define ADPA 0x61100 @@ -3284,6 +3288,7 @@ #define _TRANS_VSYNC_A 0xe0014 #define TRANS_VSYNC_END_SHIFT 16 #define TRANS_VSYNC_START_SHIFT 0 +#define _TRANS_VSYNCSHIFT_A 0xe0028 #define _TRANSA_DATA_M1 0xe0030 #define _TRANSA_DATA_N1 0xe0034 @@ -3314,6 +3319,7 @@ #define _TRANS_VTOTAL_B 0xe100c #define _TRANS_VBLANK_B 0xe1010 #define _TRANS_VSYNC_B 0xe1014 +#define _TRANS_VSYNCSHIFT_B 0xe1028 #define TRANS_HTOTAL(pipe) _PIPE(pipe, _TRANS_HTOTAL_A, _TRANS_HTOTAL_B) #define TRANS_HBLANK(pipe) _PIPE(pipe, _TRANS_HBLANK_A, _TRANS_HBLANK_B) @@ -3321,6 +3327,8 @@ #define TRANS_VTOTAL(pipe) _PIPE(pipe, _TRANS_VTOTAL_A, _TRANS_VTOTAL_B) #define TRANS_VBLANK(pipe) _PIPE(pipe, _TRANS_VBLANK_A, _TRANS_VBLANK_B) #define TRANS_VSYNC(pipe) _PIPE(pipe, _TRANS_VSYNC_A, _TRANS_VSYNC_B) +#define TRANS_VSYNCSHIFT(pipe) _PIPE(pipe, _TRANS_VSYNCSHIFT_A, \ + _TRANS_VSYNCSHIFT_B) #define _TRANSB_DATA_M1 0xe1030 #define _TRANSB_DATA_N1 0xe1034 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 1fde35d53608..34c63459c484 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2973,6 +2973,7 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe))); I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe))); I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe))); + I915_WRITE(TRANS_VSYNCSHIFT(pipe), I915_READ(VSYNCSHIFT(pipe))); intel_fdi_normal_train(crtc); @@ -5103,7 +5104,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, int plane = intel_crtc->plane; int refclk, num_connectors = 0; intel_clock_t clock, reduced_clock; - u32 dpll, dspcntr, pipeconf; + u32 dpll, dspcntr, pipeconf, vsyncshift; bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false; bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; struct drm_mode_config *mode_config = &dev->mode_config; @@ -5391,8 +5392,15 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, /* the chip adds 2 halflines automatically */ adjusted_mode->crtc_vtotal -= 1; adjusted_mode->crtc_vblank_end -= 1; - } else + vsyncshift = adjusted_mode->crtc_hsync_start + - adjusted_mode->crtc_htotal/2; + } else { pipeconf |= PIPECONF_PROGRESSIVE; + vsyncshift = 0; + } + + if (!IS_GEN3(dev)) + I915_WRITE(VSYNCSHIFT(pipe), vsyncshift); I915_WRITE(HTOTAL(pipe), (adjusted_mode->crtc_hdisplay - 1) | @@ -5980,8 +5988,13 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, /* the chip adds 2 halflines automatically */ adjusted_mode->crtc_vtotal -= 1; adjusted_mode->crtc_vblank_end -= 1; - } else + I915_WRITE(VSYNCSHIFT(pipe), + adjusted_mode->crtc_hsync_start + - adjusted_mode->crtc_htotal/2); + } else { pipeconf |= PIPECONF_PROGRESSIVE; + I915_WRITE(VSYNCSHIFT(pipe), 0); + } I915_WRITE(HTOTAL(pipe), (adjusted_mode->crtc_hdisplay - 1) |