From: Lee Jones Date: Tue, 16 Aug 2016 09:35:08 +0000 (+0100) Subject: dt-bindings: pwm: sti: Update DT bindings for capture support X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=055beac1317900fa5e860b13d60109e76cf55733;p=linux-beck.git dt-bindings: pwm: sti: Update DT bindings for capture support In order to support capture of PWM signals a new clock as well as an interrupt line are required. Furthermore a new property is introduced that allows the number of capture channels to be specified. Typically there will be less capture channels than output channels, since all channels have the latter capability, but only some have support for capture. Signed-off-by: Lee Jones Acked-by: Rob Herring Signed-off-by: Thierry Reding --- diff --git a/Documentation/devicetree/bindings/pwm/pwm-st.txt b/Documentation/devicetree/bindings/pwm/pwm-st.txt index 84d2fb807d3c..19fce774cafa 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-st.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-st.txt @@ -13,13 +13,14 @@ Required parameters: - pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module. For Pinctrl properties, please refer to [1]. -- clock-names: Set to "pwm". +- clock-names: Valid entries are "pwm" and/or "capture". - clocks: phandle of the clock used by the PWM module. For Clk properties, please refer to [2]. +- interrupts: IRQ for the Capture device Optional properties: -- st,pwm-num-chan: Number of available channels. If not passed, the driver - will consider single channel by default. +- st,pwm-num-chan: Number of available PWM channels. Default is 0. +- st,capture-num-chan: Number of available Capture channels. Default is 0. [1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt [2] Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -38,4 +39,5 @@ pwm1: pwm@fe510000 { clocks = <&clk_sysin>; clock-names = "pwm"; st,pwm-num-chan = <4>; + st,capture-num-chan = <2>; };