From: lme00437 Date: Wed, 12 Dec 2012 09:07:50 +0000 (+0100) Subject: ab8500-fg: Change current calculation X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0577610e0e6b431a1503cc5d78e8178e0dd59948;p=linux-beck.git ab8500-fg: Change current calculation This patch updates the gas gauge constant for electric current calculation according to hardware specification. Signed-off-by: Benoit GAUTHIER Signed-off-by: Lee Jones Reviewed-by: Marcus COOPER Reviewed-by: Philippe LANGLAIS Tested-by: Benoit GAUTHIER --- diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c index adc02004e7a3..1601d27ce5d4 100644 --- a/drivers/power/ab8500_fg.c +++ b/drivers/power/ab8500_fg.c @@ -36,7 +36,7 @@ #define MILLI_TO_MICRO 1000 #define FG_LSB_IN_MA 1627 -#define QLSB_NANO_AMP_HOURS_X10 1129 +#define QLSB_NANO_AMP_HOURS_X10 1071 #define INS_CURR_TIMEOUT (3 * HZ) #define SEC_TO_SAMPLE(S) (S * 4) @@ -672,11 +672,11 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) /* * Convert to unit value in mA * Full scale input voltage is - * 66.660mV => LSB = 66.660mV/(4096*res) = 1.627mA + * 63.160mV => LSB = 63.160mV/(4096*res) = 1.542mA * Given a 250ms conversion cycle time the LSB corresponds - * to 112.9 nAh. Convert to current by dividing by the conversion + * to 107.1 nAh. Convert to current by dividing by the conversion * time in hours (250ms = 1 / (3600 * 4)h) - * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm + * 107.1nAh assumes 10mOhm, but fg_res is in 0.1mOhm */ val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) / (1000 * di->bm->fg_res);